AI Chatbot Video Free

AI Chatbot Video Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Empowerment (artificial intelligence)

Empowerment in the field of artificial intelligence formalises and quantifies (via information theory) the potential an agent perceives that it has to influence its environment. An agent which follows an empowerment maximising policy, acts to maximise future options (typically up to some limited horizon). Empowerment can be used as a (pseudo) utility function that depends only on information gathered from the local environment to guide action, rather than seeking an externally imposed goal, thus is a form of intrinsic motivation. The empowerment formalism depends on a probabilistic model commonly used in artificial intelligence. An autonomous agent operates in the world by taking in sensory information and acting to change its state, or that of the environment, in a cycle of perceiving and acting known as the perception-action loop. Agent state and actions are modelled by random variables ( S : s ∈ S , A : a ∈ A {\displaystyle S:s\in {\mathcal {S}},A:a\in {\mathcal {A}}} ) and time ( t {\displaystyle t} ). The choice of action depends on the current state, and the future state depends on the choice of action, thus the perception-action loop unrolled in time forms a causal bayesian network. == Definition == Empowerment ( E {\displaystyle {\mathfrak {E}}} ) is defined as the channel capacity ( C {\displaystyle C} ) of the actuation channel of the agent, and is formalised as the maximal possible information flow between the actions of the agent and the effect of those actions some time later. Empowerment can be thought of as the future potential of the agent to affect its environment, as measured by its sensors. E := C ( A t ⟶ S t + 1 ) ≡ max p ( a t ) I ( A t ; S t + 1 ) {\displaystyle {\mathfrak {E}}:=C(A_{t}\longrightarrow S_{t+1})\equiv \max _{p(a_{t})}I(A_{t};S_{t+1})} In a discrete time model, Empowerment can be computed for a given number of cycles into the future, which is referred to in the literature as 'n-step' empowerment. E ( A t n ⟶ S t + n ) = max p ( a t , . . . , a t + n − 1 ) I ( A t , . . . , A t + n − 1 ; S t + n ) {\displaystyle {\mathfrak {E}}(A_{t}^{n}\longrightarrow S_{t+n})=\max _{p(a_{t},...,a_{t+n-1})}I(A_{t},...,A_{t+n-1};S_{t+n})} The unit of empowerment depends on the logarithm base. Base 2 is commonly used in which case the unit is bits. === Contextual Empowerment === In general the choice of action (action distribution) that maximises empowerment varies from state to state. Knowing the empowerment of an agent in a specific state is useful, for example to construct an empowerment maximising policy. State-specific empowerment can be found using the more general formalism for 'contextual empowerment'. C {\displaystyle C} is a random variable describing the context (e.g. state). E ( A t n ⟶ S t + n ∣ C ) = ∑ c ∈ C p ( c ) E ( A t n ⟶ S t + n ∣ C = c ) {\displaystyle {\mathfrak {E}}(A_{t}^{n}\longrightarrow S_{t+n}{\mid }C)=\sum _{c{\in }C}p(c){\mathfrak {E}}(A_{t}^{n}\longrightarrow S_{t+n}{\mid }C=c)} == Application == Empowerment maximisation can be used as a pseudo-utility function to enable agents to exhibit intelligent behaviour without requiring the definition of external goals, for example balancing a pole in a cart-pole balancing scenario where no indication of the task is provided to the agent. Empowerment has been applied in studies of collective behaviour and in continuous domains. As is the case with Bayesian methods in general, computation of empowerment becomes computationally expensive as the number of actions and time horizon extends, but approaches to improve efficiency have led to usage in real-time control. Empowerment has been used for intrinsically motivated reinforcement learning agents playing video games, and in the control of underwater vehicles.
Read more →
Harold Borko

Harold Borko (1922-2012) was an American psychologist and researcher working primarily in the field of information science. == Biography == Borko was born in 1922 in New York City, New York. After serving in the US Army from 1942 to 1946 he obtained a BA in Psychology from the University of California, Los Angeles in 1948 and both his MA and PhD from the University of Southern California in Psychology in 1952. He returned to the army as a psychologist until 1956 after which he began a career working in and teaching information science. He died in California in 2012. == Information Science Career == After leaving the military Borko began working at the RAND Corporation as a Systems Training Specialist in 1956 and moved to the Systems Development Corporation a year later working in the Language Processing and Retrieval department. Alongside this work he taught Psychology at USC from 1957-65 and then moved into teaching Library Science at UCLA from 1965. In 1967 Borko left his role at the Systems Development Corporation and continued as a full-time professor at UCLA until his retirement in 1993.. From 1961 to 1995 Borko authored and co-authored over 100 articles on new developments in the field as well as the historiography of information science. He served as an editor of the Journal of Educational Data Processing from 1963-1975 and as President of the American Society for Information Science in 1966 == Partial list of works == Borko, H. (1962, May). The construction of an empirically based mathematically derived classification system. In Proceedings of the May 1-3, 1962, spring joint computer conference (pp. 279-289). Borko, H., & Bernick, M. (1963). Automatic document classification. Journal of the ACM (JACM), 10(2), 151-162. Borko, H. (1964). The Storage and Retrieval of Educational Information. Journal of Teacher Education, 15(4), 449-452. Borko, H. (1964). Measuring the reliability of subject classification by men and machines. American Documentation, 15(4), 268-273. Borko, H. (1965). The conceptual foundations of information systems. Borko, H. (1968), Information science: What is it?†. Amer. Doc., 19: 3-5. https://doi.org/10.1002/asi.5090190103 Borko, H. (1970). Experiments in book indexing by computer. Information storage and retrieval, 6(1), 5-16. Borko, H. (1985). An introduction to computer-based library systems (Lucy A. Tedd). Education for Information, 3(1), 61.
Read more →
Super column

A super column is a tuple (a pair) with a binary super column name and a value that maps it to many columns. They consist of a key–value pairs, where the values are columns. Theoretically speaking, super columns are (sorted) associative array of columns. Similar to a regular column family where a row is a sorted map of column names and column values, a row in a super column family is a sorted map of super column names that maps to column names and column values. A super column is part of a keyspace together with other super columns and column families, and columns. == Code example == Written in the JSON-like syntax, a super column definition can be like this: Where: "databases" are keyspace; "Cassandra" and "HBase" are rowKeys; "name" and "address" are super column names; "firstName", "city", "age", etc. are column names.
Read more →
E-Science librarianship

E-Science librarianship refers to a role for librarians in e-Science. == Early scholars == Early references to e-Science and librarianship involve information studies scholars researching cyberinfrastructure and emerging networked information and knowledge communities. Notably Christine Borgman, Professor and Presidential Chair in Information Studies at the University of California, Los Angeles (UCLA) was a key player in bringing e-Science, and the idea of networked knowledge communities, to the attention of the library profession. In 2004, as a visiting fellow at the Oxford Internet Institute, she conducted research and lectured publicly on e-Science, Digital Libraries, and Knowledge Communities. In 2007 Anna K. Gold, formerly of MIT and Cal Poly, San Luis Obispo, authored a series of articles in D-Lib Magazine that opened the door for academic libraries to begin exploring roles, skills, and strategies for engaging in e-Science: Cyberinfrastructure, Data, and Libraries, Part 1: A Cyberinfrastructure Primer for Librarians and Cyberinfrastructure, Data, and Libraries, Part 2: Libraries and the Data Challenge: Roles and Actions for Libraries. == Academic research and health sciences libraries == In 2007, the Association of Research Libraries (ARL) e-Science task force issued its report on e-Science and librarianship. The ARL's report encouraged its member libraries to position themselves to engage with researchers involved in e-Science (eScience) by cultivating new research support strategies and developing their digital scholarship infrastructure. E-Science has multiple attributes; Tony and Jessie Hey framed e-Science for the library community by characterizing it as a research methodology: "e-Science is not a new scientific discipline in its own right: e-Science is shorthand for the set of tools and technologies required to support collaborative, networked science". In addition to academic libraries' interests in providing support for their researchers engaging in e-Science, the health sciences library community also emerged as a major proponent for creating librarian positions for supporting the information needs of large-scale, networked, research collaborations on their campuses. Neil Rambo, current director of NYU's Health Sciences Library and former director of University of Washington Health Sciences Library, was the first to use the term in the Journal of the Medical Library Association, in his 2009 editorial e-Science and the Biomedical Library. Rambo's definition of e-Science highlighted the potential e-Science held for creating data as a research product: "E-science is a new research methodology, fueled by networked capabilities and the practical possibility of gathering and storing vast amounts of data." In response to this article the University of Massachusetts Medical School Lamar Soutter Library and National Network of Libraries of Medicine, New England Region encouraged health sciences libraries to cooperate to identify skills and develop a program for training e-Science Librarians. Then, in 2013, Shannon Bohle, an archivist who was employed in the library at Cold Spring Harbor Laboratory, an NCI-designated basic cancer research facility, used experience gained there and previous papers and presentations about preserving scientific archival materials to expand the traditional definition of e-Science by including the terms, principles, and practices used in archival science. These included in the definition the "long-term storage and accessibility of all materials generated through the scientific process," as well as examples of material types traditionally preserved in archives, like "electronic/digitized laboratory notebooks, raw and fitted data sets, manuscript production and draft versions, pre-prints," as well as library materials ("print and/or electronic publications"). == Roles == Many areas of science are about to be transformed by the availability of vast amounts of new scientific data that can potentially provide insights at a level of detail never before envisaged. However, this new data dominant era brings new challenges for the scientists and they will need the skills and technologies both of computer scientists and of the library community to manage, search and curate these new data resources. Libraries will not be immune from change in this new world of research. Karen Williams identifies roles in the following areas for librarians in the developing world of e-Science. Campus Engagement Content/Collection Development and Management Teaching and Learning Scholarly Communication E-Scholarship and Digital Tools Reference/Help Services Outreach Fund Raising Exhibit and Event Planning Leadership == Challenges for research libraries == E-science tends toward inter- and multidisciplinary approaches that depend on computation and computer science. Research libraries have traditionally been discipline focused and, although increasingly technologically sophisticated, do not have systems of the scale or complexity of the e-science environment. E-science is data intensive, but research libraries have not typically been responsible for scientific data. E-science is frequently conducted in a team context, often distributed across multiple institutions and on a global scale. The primary constituency of libraries generally comprises those affiliated with the local institution. Licenses for electronic content are typically restricted to a particular institutional community, and the infrastructure to move institutional licenses into a multi-institutional environment is not well developed. E-science challenges all these traditional paradigms of research library organization and services. == Skills == Garritano & Carlson were among the first to outline a skill set for librarians seeking to support the data needs of e-Science; they identified five skill categories librarians new to this area should expect to adapt or develop when participating on such projects: Library and information science expertise Subject expertise Partnerships and outreach (both internal and external) Participating in sponsored research Balancing workload An example of librarians reconfiguring traditional librarian skills to meet the needs of researchers engaging in e-Science is Witt & Carlson's adaptation of the traditional reference interview into a "data interview" in order to provide effective data management and e-Science services. This interview consists of ten practical queries necessary for understanding the provenance and expectations for the preservation of datasets typical of e-Science that also help illustrate some of the educational tools and skills needed by a librarian new to e-Science. "What is the story of the data? What form and format are the data in? What is the expected lifespan of the dataset? How could the data be used, reused, and repurposed? How large is the dataset, and what is its rate of growth? Who are the potential audiences for the data? Who owns the data? Does the dataset include any sensitive information? What publications or discoveries have resulted from the data? How should the data be made accessible?" == Resources == In 2009 the Lamar Soutter Library at the University of Massachusetts Medical School (UMMS) and the National Network of Libraries of Medicine, New England Region (NN/LM NER) funded an e-Science program for building the skills highlighted above for librarians. Elaine Russo Martin, Director of Library Services at the Lamar Soutter Library and Director of the NN/LM NER developed this comprehensive e-Science program to build librarians' subject expertise in the sciences, developing their data management skills, and their familiarity with cyberinfrastructure and e-Science. Three major products of this program are the e-Science web portal for librarians, the E-Science Symposium, and the New England Collaborative Data Management Curriculum (NECDMC). This portal includes educational resources for specific tools and subject/discipline tutorials and modules to assist librarians new to e-Science. UMMS and NN/LM NER also publish an open access journal called the Journal of eScience Librarianship.
Read more →
Zero-knowledge service

In cloud computing, the term zero-knowledge (or occasionally no-knowledge or zero-access) is a commonly used term for online services that store, transfer or manipulate data with a high level of confidentiality, where the data is only accessible to the data's owner (the client), and not to the service provider. However, unlike "end-to-end encryption", the term "zero-knowledge" does not imply any specific threat model or security notion, and its use is commonly frowned-upon by the security community. The term "zero-knowledge" was popularized by backup service SpiderOak, which later switched to using the term "no knowledge", acknowledging that the previous terminology was not technically accurate. == Disadvantages == Most cloud storage services keep a copy of the client's password on their servers, allowing clients who have lost their passwords to retrieve and decrypt their data using alternative means of authentication; but since zero-knowledge services do not store copies of clients' passwords, if a client loses their password then their data cannot be decrypted, making it practically unrecoverable. Most of the most used cloud storage services, such as Google Drive, Dropbox, OneDrive or iCloud, are also able to furnish access requests from law enforcement agencies for similar reasons; zero-knowledge services, however, are unable to do so, since their systems are designed to make clients' data inaccessible without the client's explicit cooperation.
Read more →
Online analytical processing

In computing, online analytical processing (OLAP) (), is an approach to quickly answer multi-dimensional analytical (MDA) queries. The term OLAP was created as a slight modification of the traditional database term online transaction processing (OLTP). OLAP is part of the broader category of business intelligence, which also encompasses relational databases, report writing and data mining. Typical applications of OLAP include business reporting for sales, marketing, management reporting, business process management (BPM), budgeting and forecasting, financial reporting and similar areas, with new applications emerging, such as agriculture. OLAP tools enable users to analyse multidimensional data interactively from multiple perspectives. OLAP consists of three basic analytical operations: consolidation (roll-up), drill-down, and slicing and dicing. Consolidation involves the aggregation of data that can be accumulated and computed in one or more dimensions. For example, all sales offices are rolled up to the sales department or sales division to anticipate sales trends. By contrast, the drill-down is a technique that allows users to navigate through the details. For instance, users can view the sales by individual products that make up a region's sales. Slicing and dicing is a feature whereby users can take out (slicing) a specific set of data of the OLAP cube and view (dicing) the slices from different viewpoints. These viewpoints are sometimes called dimensions (such as looking at the same sales by salesperson, or by date, or by customer, or by product, or by region, etc.). Databases configured for OLAP use a multidimensional data model, allowing for complex analytical and ad hoc queries with a rapid execution time. They borrow aspects of navigational databases, hierarchical databases and relational databases. OLAP is typically contrasted to OLTP (online transaction processing), which is generally characterized by much less complex queries, in a larger volume, to process transactions rather than for the purpose of business intelligence or reporting. Whereas OLAP systems are mostly optimized for read, OLTP has to process all kinds of queries (read, insert, update and delete). == Overview of OLAP systems == At the core of any OLAP system is an OLAP cube (also called a 'multidimensional cube' or a hypercube). It consists of numeric facts called measures that are categorized by dimensions. The measures are placed at the intersections of the hypercube, which is spanned by the dimensions as a vector space. The usual interface to manipulate an OLAP cube is a matrix interface, like Pivot tables in a spreadsheet program, which performs projection operations along the dimensions, such as aggregation or averaging. The cube metadata is typically created from a star schema or snowflake schema or fact constellation of tables in a relational database. Measures are derived from the records in the fact table and dimensions are derived from the dimension tables. Each measure can be thought of as having a set of labels, or meta-data associated with it. A dimension is what describes these labels; it provides information about the measure. A simple example would be a cube that contains a store's sales as a measure, and Date/Time as a dimension. Each Sale has a Date/Time label that describes more about that sale. For example: Sales Fact Table +-------------+----------+ | sale_amount | time_id | +-------------+----------+ Time Dimension | 930.10| 1234 |----+ +---------+-------------------+ +-------------+----------+ | | time_id | timestamp | | +---------+-------------------+ +---->| 1234 | 20080902 12:35:43 | +---------+-------------------+ === Multidimensional databases === Multidimensional structure is defined as "a variation of the relational model that uses multidimensional structures to organize data and express the relationships between data". The structure is broken into cubes and the cubes are able to store and access data within the confines of each cube. "Each cell within a multidimensional structure contains aggregated data related to elements along each of its dimensions". Even when data is manipulated it remains easy to access and continues to constitute a compact database format. The data still remains interrelated. Multidimensional structure is quite popular for analytical databases that use online analytical processing (OLAP) applications. Analytical databases use these databases because of their ability to deliver answers to complex business queries swiftly. Data can be viewed from different angles, which gives a broader perspective of a problem unlike other models. === Aggregations === It has been claimed that for complex queries OLAP cubes can produce an answer in around 0.1% of the time required for the same query on OLTP relational data. The most important mechanism in OLAP which allows it to achieve such performance is the use of aggregations. Aggregations are built from the fact table by changing the granularity on specific dimensions and aggregating up data along these dimensions, using an aggregate function (or aggregation function). The number of possible aggregations is determined by every possible combination of dimension granularities. The combination of all possible aggregations and the base data contains the answers to every query which can be answered from the data. Because usually there are many aggregations that can be calculated, often only a predetermined number are fully calculated; the remainder are solved on demand. The problem of deciding which aggregations (views) to calculate is known as the view selection problem. View selection can be constrained by the total size of the selected set of aggregations, the time to update them from changes in the base data, or both. The objective of view selection is typically to minimize the average time to answer OLAP queries, although some studies also minimize the update time. View selection is NP-complete. Many approaches to the problem have been explored, including greedy algorithms, randomized search, genetic algorithms and A search algorithm. Some aggregation functions can be computed for the entire OLAP cube by precomputing values for each cell, and then computing the aggregation for a roll-up of cells by aggregating these aggregates, applying a divide and conquer algorithm to the multidimensional problem to compute them efficiently. For example, the overall sum of a roll-up is just the sum of the sub-sums in each cell. Functions that can be decomposed in this way are called decomposable aggregation functions, and include COUNT, MAX, MIN, and SUM, which can be computed for each cell and then directly aggregated; these are known as self-decomposable aggregation functions. In other cases, the aggregate function can be computed by computing auxiliary numbers for cells, aggregating these auxiliary numbers, and finally computing the overall number at the end; examples include AVERAGE (tracking sum and count, dividing at the end) and RANGE (tracking max and min, subtracting at the end). In other cases, the aggregate function cannot be computed without analyzing the entire set at once, though in some cases approximations can be computed; examples include DISTINCT COUNT, MEDIAN, and MODE; for example, the median of a set is not the median of medians of subsets. These latter are difficult to implement efficiently in OLAP, as they require computing the aggregate function on the base data, either computing them online (slow) or precomputing them for possible rollouts (large space). == Types == OLAP systems have been traditionally categorized using the following taxonomy. === Multidimensional OLAP (MOLAP) === MOLAP (multi-dimensional online analytical processing) is the classic form of OLAP and is sometimes referred to as just OLAP. MOLAP stores this data in an optimized multi-dimensional array storage, rather than in a relational database. Some MOLAP tools require the pre-computation and storage of derived data, such as consolidations – the operation known as processing. Such MOLAP tools generally utilize a pre-calculated data set referred to as a data cube. The data cube contains all the possible answers to a given range of questions. As a result, they have a very fast response to queries. On the other hand, updating can take a long time depending on the degree of pre-computation. Pre-computation can also lead to what is known as data explosion. Other MOLAP tools, particularly those that implement the functional database model do not pre-compute derived data but make all calculations on demand other than those that were previously requested and stored in a cache. Advantages of MOLAP Fast query performance due to optimized storage, multidimensional indexing and caching. Smaller on-disk size of data compared to data stored in relational database due to compression techniques. Automated computation of higher-level aggregates of the data. It is very compact for low dimension data se
Read more →
Parchive

Parchive (a portmanteau of parity archive, and formally known as Parity Volume Set Specification) is an erasure code system that produces par files for checksum verification of data integrity, with the capability to perform data recovery operations that can repair or regenerate corrupted or missing data. Parchive was originally written to solve the problem of reliable file sharing on Usenet, but it can be used for protecting any kind of data from data corruption, disc rot, bit rot, and accidental or malicious damage. Despite the name, Parchive uses more advanced techniques (specifically error correction codes) than simplistic parity methods of error detection. As of 2015, PAR1 is obsolete, PAR2 is mature for widespread use, and PAR3 is a discontinued experimental version developed by MultiPar author Yutaka Sawada. The original SourceForge Parchive project has been inactive since April 30, 2015. A new PAR3 specification has been worked on since April 28, 2019 by PAR2 specification author Michael Nahas. An alpha version of the PAR3 specification has been published on January 29, 2022 while the program itself is being developed. == History == Parchive was intended to increase the reliability of transferring files via Usenet newsgroups. Usenet was originally designed for informal conversations, and the underlying protocol, NNTP was not designed to transmit arbitrary binary data. Another limitation, which was acceptable for conversations but not for files, was that messages were normally fairly short in length and limited to 7-bit ASCII text. Various techniques were devised to send files over Usenet, such as uuencoding and Base64. Later Usenet software allowed 8 bit Extended ASCII, which permitted new techniques like yEnc. Large files were broken up to reduce the effect of a corrupted download, but the unreliable nature of Usenet remained. With the introduction of Parchive, parity files could be created that were then uploaded along with the original data files. If any of the data files were damaged or lost while being propagated between Usenet servers, users could download parity files and use them to reconstruct the damaged or missing files. Parchive included the construction of small index files (.par in version 1 and .par2 in version 2) that do not contain any recovery data. These indexes contain file hashes that can be used to quickly identify the target files and verify their integrity. Because the index files were so small, they minimized the amount of extra data that had to be downloaded from Usenet to verify that the data files were all present and undamaged, or to determine how many parity volumes were required to repair any damage or reconstruct any missing files. They were most useful in version 1 where the parity volumes were much larger than the short index files. These larger parity volumes contain the actual recovery data along with a duplicate copy of the information in the index files (which allows them to be used on their own to verify the integrity of the data files if there is no small index file available). In July 2001, Tobias Rieper and Stefan Wehlus proposed the Parity Volume Set specification, and with the assistance of other project members, version 1.0 of the specification was published in October 2001. Par1 used Reed–Solomon error correction to create new recovery files. Any of the recovery files can be used to rebuild a missing file from an incomplete download. Version 1 became widely used on Usenet, but it did suffer some limitations: It was restricted to handle at most 255 files. The recovery files had to be the size of the largest input file, so it did not work well when the input files were of various sizes. (This limited its usefulness when not paired with the proprietary RAR compression tool.) The recovery algorithm had a bug, due to a flaw in the academic paper on which it was based. It was strongly tied to Usenet and it was felt that a more general tool might have a wider audience. In January 2002, Howard Fukada proposed that a new Par2 specification should be devised with the significant changes that data verification and repair should work on blocks of data rather than whole files, and that the algorithm should switch to using 16 bit numbers rather than the 8 bit numbers that PAR1 used. Michael Nahas and Peter Clements took up these ideas in July 2002, with additional input from Paul Nettle and Ryan Gallagher (who both wrote Par1 clients). Version 2.0 of the Parchive specification was published by Michael Nahas in September 2002. Peter Clements then went on to write the first two Par2 implementations, QuickPar and par2cmdline. Abandoned since 2004, Paul Houle created phpar2 to supersede par2cmdline. Yutaka Sawada created MultiPar to supersede QuickPar. MultiPar uses par2j.exe (which is partially based on par2cmdline's optimization techniques) to use as MultiPar's backend engine. == Versions == Versions 1 and 2 of the file format are incompatible. (However, many clients support both.) === Par1 === For Par1, the files f1, f2, ..., fn, the Parchive consists of an index file (f.par), which is CRC type file with no recovery blocks, and a number of "parity volumes" (f.p01, f.p02, etc.). Given all of the original files except for one (for example, f2), it is possible to create the missing f2 given all of the other original files and any one of the parity volumes. Alternatively, it is possible to recreate two missing files from any two of the parity volumes and so forth. Par1 supports up to a total of 256 source and recovery files. === Par2 === Par2 files generally use this naming/extension system: filename.vol000+01.PAR2, filename.vol001+02.PAR2, filename.vol003+04.PAR2, filename.vol007+06.PAR2, etc. The number after the "+" in the filename indicates how many blocks it contains, and the number after "vol" indicates the number of the first recovery block within the PAR2 file. If an index file of a download states that 4 blocks are missing, the easiest way to repair the files would be by downloading filename.vol003+04.PAR2. However, due to the redundancy, filename.vol007+06.PAR2 is also acceptable. There is also an index file filename.PAR2, it is identical in function to the small index file used in PAR1. Par2 specification supports up to 32,768 source blocks and up to 65,535 recovery blocks. Input files are split into multiple equal-sized blocks so that recovery files do not need to be the size of the largest input file. Although Unicode is mentioned in the PAR2 specification as an option, most PAR2 implementations do not support Unicode. Directory support is included in the PAR2 specification, but most or all implementations do not support it. === Par3 === The Par3 specification was originally planned to be published as an enhancement over the Par2 specification. However, to date, it has remained closed source by specification owner Yutaka Sawada. A discussion on a new format started in the GitHub issue section of the maintained fork par2cmdline on January 29, 2019. The discussion led to a new format which is also named as Par3. The new Par3 format's specification is published on GitHub, but remains being an alpha draft as of January 28, 2022. The specification is written by Michael Nahas, the author of Par2 specification, with the help from Yutaka Sawada, animetosho and malaire. The new format claims to have multiple advantages over the Par2 format, including support for: More than 216 files and more than 216 blocks. Packing small files into one block, as well as deduplication when a block appears in multiple files. UTF-8 file names. File permissions, hard links, symbolic/soft links, and empty directories. Embedding PAR data inside other formats, like ZIP archives or ISO disk images. "Incremental backups", where a user creates recovery files for some file or folder, change some data, and create new recovery files reusing some of the older files. More error correction code algorithms (such as LDPC and sparse random matrix). BLAKE3 hashes, dropping support for the MD5 hashes used in PAR2. == Software == === Multi-platform === par2+tbb (GPLv2) — a concurrent (multithreaded) version of par2cmdline 0.4 using TBB. Only compatible with x86 based CPUs. It is available in the FreeBSD Ports system as par2cmdline-tbb. Original par2cmdline — (obsolete). Available in the FreeBSD Ports system as par2cmdline. par2cmdline maintained fork by BlackIkeEagle. par2cmdline-mt is another multithreaded version of par2cmdline using OpenMP, GPLv2, or later. Currently merged into BlackIkeEagle's fork and maintained there. ParPar (CC0) is a high performance, multithreaded PAR2 client and Node.js library. Does not support verifying or repair, it can currently only create PAR2 archives. par2deep (LGPL-3.0) — Produce, verify and repair par2 files recursively, both on the command line as well as with the aid of a graphical user interface. It is available in the Python Package Index system as par2deep. par2cron (MIT License) is an o
Read more →
Data janitor

A data janitor is a person who works to take big data and condense it into useful amounts of information. Also known as a "data wrangler", a data janitor sifts through data for companies in the information technology industry. A multitude of start-ups rely on large amounts of data, so a data janitor works to help these businesses with this basic, but difficult process of interpreting data. While it is a commonly held belief that data janitor work is fully automated, many data scientists are employed primarily as data janitors. The information technology industry has been increasingly turning towards new sources of data gathered on consumers, so data janitors have become more commonplace in recent years.
Read more →
Texture compression

Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.
Read more →
Small Data

Small Data: the Tiny Clues that Uncover Huge Trends is Martin Lindstrom's seventh book. It chronicles his work as a branding expert, working with consumers across the world to better understand their behavior. The theory behind the book is that businesses can better create products and services based on observing consumer behavior in their homes, as opposed to relying solely on big data. == Content == The book is based on a several year period of consumer studies for major corporations across the globe. It features case studies of the author's work interviewing consumers in their homes and using his observations to create hypotheses as to why they use products the way that they do. == Public reception == The book was a New York Times Bestseller upon release and was positively reviewed on several websites, Including Entrepreneur and Forbes. In 2016, it was named a Best Business Book by strategy+business and one of Inc. Magazine's Best Sales and Marketing books.
Read more →
Agentic commerce

Agentic commerce (also referred to as agent-based commerce) describes an emerging form of e-commerce in which autonomous artificial intelligence (AI) agents independently execute purchasing and payment processes on behalf of users or organizations. Unlike conventional digital commerce systems, which require direct human interaction at key decision points, agentic commerce systems are designed to search for products or services, evaluate options, make purchasing decisions, and complete payments without real-time human involvement. An emerging development within the broader fields of e-commerce, fintech, and artificial intelligence; agentic commerce combines advances in generative AI, autonomous agents, application programming interfaces (APIs), and digital payment infrastructures to direct transactions with no direct human interaction. == Characteristics == A defining feature of agentic commerce is the delegation of end-to-end commercial activities to software agents. These agents typically operate according to predefined user preferences, rules, or constraints, such as price limits, quality criteria, delivery times, or preferred payment methods. Based on these parameters, an agent can autonomously perform tasks including product discovery, price comparison, contract selection, order placement, and payment execution. In contrast to decision-support systems, which provide recommendations to human users, agentic commerce systems are designed to act independently. Human involvement may be limited to initial configuration, periodic supervision, or exception handling. == Comparison with traditional and AI-assisted commerce == Traditional e-commerce requires users to manually browse products, select offers, and authorize payments. Generative AI systems used in commerce commonly assist users by answering questions or suggesting options, and do not complete transactions autonomously. Agentic commerce differs in that decision-making authority is partially or fully transferred to AI agents. As a result, the conventional customer journey, characterized by conscious decision points, may be replaced by continuous, automated micro-decisions performed by software. == Applications and business use cases == Potential applications of agentic commerce include recurring purchases, subscription management, business-to-business procurement, inventory replenishment, and price monitoring. In such contexts, transactions are often predictable and standardized, making them suitable for automation. From a business perspective, agentic commerce systems may be used to optimize supply chains, manage inventory levels, negotiate prices algorithmically, or execute transactions across multiple platforms. Enterprises adopting the new technology include retailers Walmart, Home Depot, Wayfair and Urban Outfitters, and ad tech DSPs, including Google Ads, Amazon, and Yahoo. Chinese tech firms are using apps to provide full-service shopping and payment tools. These includes Alibaba, Tencent, and ByteDance who are currently developing AI powered shopping apps. The Qwen AI chatbot allows users to complete transactions directly within its interface. US firms are still leading in developing AI models but integration is slower due to privacy restrictions. == Payments and technical infrastructure == Agentic commerce relies on digital payment systems capable of supporting automated, machine-initiated transactions, including API-based payment processing, tokenization, real-time authorization, and continuous risk monitoring. Typical user interfaces, such as shopping carts, may be replaced by backend integrations between AI agents, merchants, and payment service providers. For example, Iike 2025, Alibaba launched Alipay AI Pay, which grew and began operating as an application for different retailers. In December 2025, Alipay teamed up with Rokid to enable developers to integrate AI payments into AI agents on Rokid's Lingzhu platform. In January 2025, Alipay unveiled the Agentic Commerce Trust Protocol in partnership with Alibaba's consumer AI applications, such as the Qwen App and Taobao Instant Commerce. Qwen adopted the platform first, connecting it to Taobao Instant Commerce and Alipay AI Pay. Users could use Qwen's agentic feature to place food and drink orders within the application instead of having to click outside to an external browser. For merchants, participation in agentic commerce may require products and services to be presented in structured, machine-readable formats to ensure discoverability and interoperability with autonomous agents. == Universal Commerce Protocol (UCP) == In January 2026, Google announced the Universal Commerce Protocol (UCP), an open-source web standard intended to enable interoperability between AI agents and retail systems across the shopping journey, from discovery and checkout to post-purchase support. UCP makes use of REST, JSON-RPC transports, and support for Agent Payments Protocol (AP2), Agent2Agent (A2A), and Model Context Protocol (MCP). == Legal, regulatory, and security considerations == The use of autonomous agents in commerce raises legal and regulatory questions, particularly regarding authorization, liability, consumer protection, and fraud prevention. Existing payment and contract frameworks are generally based on human decision-makers, and their applicability to autonomous agents remains an area of active discussion. Open issues include responsibility for unauthorized or erroneous transactions, mechanisms for dispute resolution, standards for agent authentication, and compliance with data protection and financial regulations. Continuous, automated transaction patterns may also require new approaches to security and risk assessment. Traditional fraud models centered on identity verification may be insufficient for agentic commerce, and that merchants may need intent-based detection methods using machine learning and behavioral analysis to distinguish legitimate AI agents from malicious automation. === Governance frameworks === The deployment of autonomous AI agents in commercial environments has prompted the development of dedicated governance frameworks. These aim to define operational boundaries, decision authority, oversight mechanisms, and accountability structures for agentic systems. The Agentic Commerce Framework (ACF), created in 2025 by Vincent Dorange, is a governance standard that structures the deployment of autonomous AI agents around four founding principles (Decision Sovereignty, Governance by Design, Ultimate Human Control, Traceable Accountability), four operational layers, and 18 governance KPIs. In January 2026, Singapore's Infocomm Media Development Authority (IMDA) published the Model AI Governance Framework for Agentic AI, extending its existing AI governance guidelines to address agent-specific risks including delegation chains and multi-agent coordination. The Cloud Security Alliance (CSA) has also proposed an Agentic Trust Framework applying zero-trust principles to AI agent governance. == Ecosystem and implementation == The adoption of agentic commerce typically requires changes in commerce architecture, data modeling, identity and permissions, and API-based orchestration of checkout and post-purchase workflows. Management consultancies have identified agentic commerce as a structural evolution of digital commerce, emphasizing the role of AI-driven agents in automating discovery, decision-making, and transaction processes across commerce systems. McKinsey & Company has described agentic commerce as a significant shift in how consumers interact with brands and how enterprises design their commerce operating models. In Europe, this ecosystem also includes digital commerce consultancies specializing in the adoption of agentic commerce. Consulting firms such as Horrea support brands in understanding and implementing the technological and organizational shifts associated with agentic commerce. == Market development and outlook == Agentic commerce is generally regarded as an early-stage development. Industry analysts have projected that AI-driven agents could account for a small but growing share of digital payment transactions within the coming years. Due to the scale of global digital commerce, even limited adoption could represent substantial transaction volumes. Analysts expect that by 2029, AI agents could handle between 1% and 4% of all digital payment transactions. With a projected total transaction volume of over $36 trillion a year, even a small share translates into a market worth up to $1.47 trillion. According to a McKinsey study from October 2025, agentic commerce projects that by 2030, the U.S. business-to-consumer retail market alone could see up to $1 trillion in revenue orchestrated through agentic commerce. On a global scale, the opportunity could range from $3 trillion to $5 trillion. Early experiments and pilot projects have demonstrated both the potential and current limitations of the
Read more →
Artificial intelligence in architecture

Artificial intelligence in architecture is the use of artificial intelligence in automation, design, and planning in the architectural process or in assisting human skills in the field of architecture. AI has been used by some architects for design, and has been proposed as a way to automate planning and routine tasks in the field. == Implications == === Benefits === Artificial intelligence, according to ArchDaily, is said to potentially significantly augment the architectural profession through its ability to improve the design and planning process as well as increasing productivity. Through its ability to handle a large amount of data, AI is said to potentially allow architects a range of design choices with criteria considerations such as budget, requirements adjusted to space, and sustainability goals calculated as part of the design process. ArchDaily said this may allow the design of optimized alternatives that can then undergo human review. AI tools are also said to potentially allow architects to assimilate urban and environmental data to inform their designs, streamlining initial stages of project planning and increasing efficiency and productivity. The advances in generative design through the input of specific prompts allow architects to produce visual designs, including photorealistic images, and thus render and explore various material choices and spatial configurations. ArchDaily noted this could speed the creative process as well as allow for experimentation and sophistication in the design. Additionally, AI's capacity for pattern recognition and coding could aid architects in organizing design resources and developing custom applications, thus enhancing the efficiency and collaboration between both architects and AI. AI is thought to also be able to contribute to the sustainability of buildings by analyzing various factors and following recommended energy-efficient modifications, thus pushing the industry towards greener practices. The use of AI in building maintenance, project management, and the creation of immersive virtual reality experiences are also thought of as potentially augmenting the architectural design process and workflow. Examples include the use of text-to-image systems such as Midjourney to create detailed architectural images, and the use of AI optimization systems from companies such as Finch3D and Autodesk to automatically generate floor plans from simple programmatic inputs. In contrast to digital-only creative practices, the high materiality of architectural outputs requires transitions from ephemeral digital files to permanent physical structures that are subject to strict safety regulations, material constraints, sensory intuition, and site-specific cultural contexts, making full automation difficult. Early adopters such as architect Stephen Coorlas have actively challenged the boundaries of architectural practice through AI. His early experimental initiative, Speculations on AI and Architecture, confronts the discipline's traditional workflows by training text-to-image AI tools such as Midjourney, Luma AI, and PromeAI to generate more nuanced architectural illustrations including construction documents, architectural details, and assembly sequences for various structures. Coorlas inputs precise terminology and architectural language to provoke the AI into producing axonometric drawings that resemble conventional documentation, then experiments with animating the outputs using AI generated depth maps and other AI image-to-3D wireframe tools. Stephen's inventive process invites architects and designers to reconsider authorship, automation, and the future of visual communication in the built environment. Rather than treating AI as a peripheral tool, Stephen has advocated for AI to be a speculative collaborator capable of engaging with discipline-specific challenges. His work contributes to the growing discourse on generative design, parametric optimization, and the philosophical implications of machine-assisted creativity raising urgent questions about how such technologies will reshape architectural agency, precision, and pedagogy. Another prominent advocate is Architect Andrew Kudless, who in an interview to Dezeen recounted that he uses AI to innovate in architectural design by incorporating materials and scenes not usually present in initial plans, which he believes can significantly alter client presentations. He told Dezeen he believes one should show clients renderings from the onset, with AI assisting in this work, arguing that changes in design should be a positive aspect of the client-designer relationship by actively involving clients in the process. Additionally, Kudless highlighted the AI's potential to facilitate labor in architectural firms, particularly in automating rendering tasks, thus reducing the workload on junior staff while maintaining control over the creative output. === Emergent aesthetics === In an interview for the AItopia series to Dezeen, designer Tim Fu discussed the transformative potential of AI in architecture, and proposed a future where AI could herald a "neoclassical futurist" style, blending the grandeur of classical aesthetics with futuristic design. Through his collaborative project, The AI Stone Carver, Fu showcased how AI can innovate traditional practices by generating design concepts that are then realized through human craftsmanship, such as stone carving by mason Till Apfel. This approach, he believed, celebrated the fusion of diverse architectural styles and also emphasized the unique capabilities of AI in enhancing creative design processes. Fu told Dezeen he envisions the integration of AI in design as a means to revive the ornamentation and detailed aesthetics characteristic of classical architecture, moving away from minimalism, which he said dominates contemporary architecture. He argued that AI's involvement in the ideation phase of design allows for a reversal in the roles of machine and human, enabling architects and designers to focus on creating more intricate and ornamental structures. Fu's optimistic outlook extended to the broader impact of AI on the architectural field, seeing it as an indispensable tool that will shift rather than replace human roles, enriching the field with innovative designs that pay homage to the beauty and qualities of classical architecture not present in contemporary architecture while embracing new technologies. This perspective resonates with designers like Manas Bhatia, whose explorations similarly embrace generative AI as a co-creator and a medium to express ideas, blend architectural traditions, and speculate spatial futures. === Concerns === As AI continues to expand its presence across various industries, its impact on the architectural profession has become a topic of growing discussion. These discussions focus on how AI processes may influence traditional architectural practices, potentially altering job roles, and shaping the nature of creativity. While AI-driven processes may increase efficiency in some aspects of the profession, they also raise questions about the potential loss of unique design perspectives. These thoughts have been countered by many prominent creative figures in the realm of AI architecture, such as Stephen Coorlas, Tim Fu, Hassan Ragab, and Manas Bhatia who have showcased the amplification of creativity in design and potential benefits in terms of restoring creative power to the designer. A key concern is that AI-powered tools could diminish the need for human involvement in specific tasks traditionally performed by architects. This has led to speculation that the profession may increasingly shift toward roles focused on oversight, coordination, and strategic decision-making rather than hands-on design work. In some design scenarios, algorithmically generated solutions can be adjusted to prioritize efficiency and cost-effectiveness, which some argue may overshadow the creative and contextual nuances that define individual architectural styles. As with any discipline though, it has been determined that AI can be configured to provide beneficial results based on inputs and end goals the architect or designer assigns it. There are also concerns about the potential for AI to exacerbate inequalities within the architectural profession. For instance, larger firms with greater resources to invest in advanced AI technologies may gain a competitive edge over smaller firms and independent architects. This dynamic could contribute to industry consolidation, potentially limiting the diversity of architectural practice and stifling innovation. Ethical considerations in regard to cultural sensitivity have also been raised due to the datasets used to train AI. Without proper vetting of data or implementing failsafe overrides, AI generated outcomes can trend toward overly documented and prioritized content.
Read more →
Oculus Medium

Oculus Medium is a digital sculpting software that works with virtual reality headsets and 6DoF motion controllers. It is used to create and paint digital sculptures. Medium works only on Oculus Rift. It was released on December 5, 2016, following with a major update in 2018 introducing new features and a revamped UI. On December 9, 2019, Oculus Medium was acquired by Adobe and re-named to "Medium by Adobe".
Read more →
Tertiary source

A tertiary source is an index or textual consolidation of already published primary and secondary sources that does not provide additional interpretations or analysis of the sources. Some tertiary sources can be used as an aid to find key (seminal) sources, key terms, general common knowledge and established mainstream science on a topic. The exact definition of tertiary varies by academic field. Academic research standards generally do not accept tertiary sources such as encyclopedias as citations, although survey articles are frequently cited rather than the original publication. == Overlap with secondary sources == As is also the case with distinguishing primary and secondary sources in some disciplines, there is not always a clear distinguishing line between secondary and tertiary sources. Depending on the topic of research, a scholar may use a bibliography, dictionary, or encyclopedia as either a tertiary or a secondary source. This causes some difficulty in defining many sources as either one type or the other. In some academic disciplines, the differentiation between a secondary and tertiary source is relative. In the United Nations International Scientific Information System (UNISIST) model, a secondary source is a bibliography, whereas a tertiary source is a synthesis of primary sources. == Types of tertiary sources == Tertiary sources can come in book form or as an online resource. Tertiary sources in book form are frequently organised in alphabetical order, whereas an online tertiary source may be searchable by keyword. Examples of tertiary sources include; reference books, encyclopedias, dictionaries, some textbooks, abstracts, directories, factbooks, handbooks, manuals and compendia. Indexes, bibliographies, concordances, and databases are aggregates of primary and secondary sources and therefore often considered tertiary sources. They may also serve as a point of access to the full or partial text of primary and secondary sources. Almanacs, travel guides, field guides, and timelines are also examples of tertiary sources. Tertiary sources attempt to summarize, collect, and consolidate the source materials into an overview without adding analysis and synthesis of new conclusions. Wikipedia is a tertiary source.
Read more →
How to Solve it by Computer

How to Solve it by Computer is a computer science book by R. G. Dromey, first published by Prentice-Hall in 1982. It is occasionally used as a textbook, especially in India. It is an introduction to the whys of algorithms and data structures. Features of the book: The design factors associated with problems, The creative process behind coming up with innovative solutions for algorithms and data structures, The line of reasoning behind the constraints, factors and the design choices made. The very fundamental algorithms portrayed by this book are mostly presented in pseudocode and/or Pascal notation.
Read more →