AI Chatbot You Can Talk To

AI Chatbot You Can Talk To — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Traceability

  Traceability is the capability to trace something. In some cases, it is interpreted as the ability to verify the history, location, or application of an item by means of documented recorded identification. Other common definitions include the capability (and implementation) of keeping track of a given set or type of information to a given degree, or the ability to chronologically interrelate uniquely identifiable entities in a way that is verifiable. Traceability is applicable to measurement, supply chain, software development, healthcare and security. == Measurement == The term measurement traceability or metrological traceability is used to refer to an unbroken chain of comparisons relating an instrument's measurements to a known standard. Calibration to a traceable standard can be used to determine an instrument's bias, precision, and accuracy. It may also be used to show a chain of custody—from current interpretation of evidence to the actual evidence in a legal context, or history of handling of any information. In many countries, national standards for weights and measures are maintained by a National Metrological Institute (NMI) which provides the highest level of standards for the calibration / measurement traceability infrastructure in that country. Examples of government agencies include the National Physical Laboratory, UK (NPL) the National Institute of Standards and Technology (NIST) in the USA, the Physikalisch-Technische Bundesanstalt (PTB) in Germany, the Instituto Nazionale di Ricerca Metrologica (INRiM) in Italy, and the National Research Council of Canada (NRC). As defined by NIST, "Traceability of measurement requires the establishment of an unbroken chain of comparisons to stated references each with a stated uncertainty." A clock providing traceable time is traceable to a time standard such as Coordinated Universal Time or International Atomic Time. The Global Positioning System is a source of traceable time. === Food processing === In food processing (meat processing, fresh produce processing), the term traceability refers to the recording through means of barcodes or RFID tags and other tracking media, all movement of product and steps within the production process. One of the key reasons this is such a critical point is in instances where an issue of contamination arises, and a recall is required. Where traceability has been closely adhered to, it is possible to identify, by precise date/time and exact location which goods must be recalled, and which are safe, potentially saving millions of dollars in the recall process. Traceability within the food processing industry is also utilised to identify key high production and quality areas of a business, versus those of low return, and where points in the production process may be improved. In food processing software, traceability systems imply the use of a unique piece of data (e.g., order date/time or a serialized sequence number, generally through the use of a barcode / RFID) which can be traced through the entire production flow, linking all sections of the business, including suppliers and future sales through the supply chain. Messages and files at any point in the system can then be audited for correctness and completeness, using the traceability software to find the particular transaction and/or product within the supply chain. In food systems, ISO 22005, as part of the ISO 22000 family of standards, has been developed to define the principles for food traceability and specifies the basic requirements for the design and implementation of a feed and food traceability system. It can be applied by an organization operating at any step in the feed and food chain. The European Union's General Food Law came into force in 2002, making traceability compulsory for food and feed operators and requiring those businesses to implement traceability systems. The EU introduced its Trade Control and Expert System, or TRACES, in April 2004. The system provides a central database to track movement of animals within the EU and from third countries. Australia has its National Livestock Identification System to keep track of livestock from birth to slaughterhouse. India has started taking initiatives for setting up traceability systems at Government and Corporate levels. Grapenet, an initiative by Agriculture and Processed Food Products Export Development Authority (APEDA), Ministry of Commerce, Government of India is an example in this direction. GrapeNet is an internet based traceability software system for monitoring fresh grapes exported from India to the European Union. GrapeNet is a first of its kind initiative in India that has put in place an end-to-end system for monitoring pesticide residue, achieve product standardization and facilitate tracing back from pallets to the farm of the Indian grower, through the various stages of sampling, testing, certification and packing. Grapenet won the National Award (Gold), in the winners announced for the best e-Governance initiatives undertaken in India in 2007. The Directorate Generate Foreign Trade (DGFT), Government of India, through its notification dated 04.02.2009 relating to Amendment in Foreign Trade Policy (RE2008)has mandated that Export to the European Union is permitted subject to registration with APEDA, thereby making Grapenet mandatory for all exports of fresh grapes from India to Europe. Uruguay has also designed a system called "Traceability & Electronic Information System of the Beef Industry". Traceability in food supply can also refer to practices employed by individual companies, including Ritual and Amway's Nutrilite. In the case of Nutrilite's supplements, ingredients are documented and tested throughout farming, processing, and manufacturing to ensure traceability at each stage of production. == Systems and software development == In systems and software development, the term traceability (or requirements traceability) refers to the ability to link product requirements back to stakeholders' rationales and forward to corresponding design artifacts, code, and test cases. Traceability supports numerous software engineering activities such as change impact analysis, compliance verification or traceback of code, regression test selection, and requirements validation. It is usually accomplished in the form of a matrix created for the verification and validation of the project. Unfortunately, the practice of constructing and maintaining a requirements trace matrix (RTM) can be very arduous and over time the traces tend to erode into an inaccurate state unless date/time stamped. Alternate automated approaches for generating traces using information retrieval methods have been developed. The IEEE defines traceability as "(1)The degree to which a relationship can be established between two or more products of the development process, especially products having a predecessor, successor or master-subordinate relationship to one another. For example, the degree to which the requirements and design of a given software component match. See also: consistency. " and "(2) The degree to which each element in a software development product establishes its reason for existing; for example, the degree to which each element in a bubble chart references the requirement that it satisfies." In transaction processing software, traceability implies use of a unique piece of data (e.g., order date/time or a serialized sequence number) which can be traced through the entire software flow of all relevant application programs. Messages and files at any point in the system can then be audited for correctness and completeness, using the traceability key to find the particular transaction. This is also sometimes referred to as the transaction footprint. == Health care == Patient safety during healthcare service plays an important role in preventing delayed recovery or even mortality, by increasing and improving the quality of life of citizens, and is considered an indicator of the quality status of health services Maintaining patient safety is a complex task and involves factors inherent to the environment and human actions. New technologies facilitate the traceability tools of patients and medications. This is particularly relevant for drugs that are considered high risk and cost. Recent research in the healthcare industry emphasizes the significant impact of Blockchain Technology (BCT) on improving the performance of healthcare supply chain management. It highlights BCT's role in enhancing transparency, data immutability, and efficient management, leading to better cooperation among stakeholders and effective risk mitigation in healthcare services. The World Health Organization has recognized the importance of traceability for medical products of human origin (MPHO) and urged member states "to encourage the implementation of globally consistent coding systems to facilitate national and international traceability". == Security and cri

  Read more →
• 

  Digital Cinema Package

  A Digital Cinema Package (DCP) is a collection of digital files used to store and convey digital cinema (DC) audio, image, and data streams. The term was popularized by Digital Cinema Initiatives, LLC in its original recommendation for packaging DC contents. However, the industry tends to apply the term to the structure more formally known as the composition. A DCP is a container format for compositions, a hierarchical file structure that represents a title version. The DCP may carry a partial composition (e.g. not a complete set of files), a single complete composition, or multiple and complete compositions. The composition consists of a Composition Playlist (in XML format) that defines the playback sequence of a set of Track Files. Track Files carry the essence (audio, image, subtitles), which is wrapped using Material eXchange Format (MXF). Track Files must contain only one essence type. Two track files at a minimum must be present in every composition (see SMPTE ST429-2 D-Cinema Packaging – DCP Constraints, or Cinepedia): a track file carrying picture essence, and a track file carrying audio essence. The composition, consisting of a Composition Playlist (CPL) and associated track files, are distributed as a Digital Cinema Package (DCP). A composition is a complete representation of a title version, while the DCP need not carry a full composition. However, as already noted, it is commonplace in the industry to discuss the title in terms of a DCP, as that is the deliverable to the cinema. The Picture Track File essence is compressed using JPEG 2000 and the Audio Track File carries a 24-bit linear PCM uncompressed multichannel WAV file. Encryption may optionally be applied to the essence of a track file to protect it from unauthorized use. The encryption used is AES 128-bit in CBC mode. In practice, there are two versions of composition in use. The original version is called Interop DCP. In 2009, a specification was published by SMPTE (SMPTE ST 429-2 Digital Cinema Packaging – DCP Constraints) for what is commonly referred to as SMPTE DCP. SMPTE DCP is similar but not backwards compatible with Interop DCP, resulting in an uphill effort to transition the industry from Interop DCP to SMPTE DCP. SMPTE DCP requires significant constraints to ensure success in the field, as shown by ISDCF. While legacy support for Interop DCP is necessary for commercial products, new productions are encouraged to be distributed in SMPTE DCP. == Technical specifications == The DCP root folder (in the storage medium) contains a number of files, some used to store the image and audio contents, and some other used to organize and manage the whole playlist. === Picture MXF files === Picture contents may be stored in one or more reels corresponding to one or more MXF files. Each reel contains pictures as MPEG-2 or JPEG 2000 essence, depending on the adopted codec. MPEG-2 is no longer compliant with the DCI specification. JPEG 2000 is the only accepted compression format. Supported frame rates are: SMPTE (JPEG 2000) 24, 25, 30, 48, 50, and 60 fps @ 2K 24, 25, and 30 fps @ 4K 24 and 48 fps @ 2K stereoscopic MXF Interop (JPEG 2000) – Deprecated 24 and 48 fps @ 2K (MXF Interop can be encoded at 25 frame/s but support is not guaranteed) 24 fps @ 4K 24 fps @ 2K stereoscopic MXF Interop (MPEG-2) – Deprecated 23.976 and 24 fps @ 1920 × 1080 Maximum frame sizes are 2048 × 1080 for 2K DC, and 4096 × 2160 for 4K DC. Common formats are: SMPTE (JPEG 2000) Flat (1998 × 1080 or 3996 × 2160), = 1.85:1 aspect ratio Scope (2048 × 858 or 4096 × 1716), ~2.39:1 aspect ratio HDTV (1920 × 1080 or 3840 × 2160), 16:9 aspect ratio (~1.78:1) (although not specifically defined in the DCI specification, this resolution is DCI compliant per section 8.4.3.2). Full (2048 × 1080 or 4096 × 2160) (~1.9:1 aspect ratio, official name by DCI is Full Container. Not widely accepted in cinemas.) MXF Interop (MPEG-2) – Deprecated Full Frame (1920 × 1080) 12 bits per component precision (36 bits total per pixel) XYZ' colorspace; the prime mark indicates gamma encoding (gamma=2.6) Maximum bit rate is 250 Mbit/s (1.3 MBytes per frame at 24 frame per second) === Sound MXF files === Sound contents are also stored in reels corresponding to picture reels in number and duration. In case of multilingual features, separate reels are required to convey different languages. Each file contains linear PCM essence. Sampling rate is 48,000 or 96,000 samples per second Sample precision of 24 bits Linear mapping (no companding) Up to 16 independent channels === Asset map file === List of all files included in the DCP, in XML format. === Composition playlist file === Defines the playback order during presentation. The order is saved in XML format in this file; each picture and sound reel is identified by its UUID. In the following example, a reel is composed by picture and sound: === Packing list file or package key list (PKL) === All files in the composition are hashed and their hash is stored here, in XML format. This file is generally used during ingestion in a digital cinema server to verify if data have been corrupted or tampered with in some way. For example, an MXF picture reel is identified by the following element: The hash value is the Base64 encoding of the SHA-1 checksum. It can be calculated with the command: openssl sha1 -binary "FILE_NAME" | openssl base64 === Volume index file === A single DCP may be stored in more than one medium (e.g., multiple hard disks). The XML file VOLINDEX is used to identify the volume order in the series. == 3D DCP == The DCP format is also used to store stereoscopic (3D) contents for 3D films. In this case, 48 frames exist for every second – 24 frames for the left eye, 24 frames for the right. Depending on the projection system used, the left eye and right eye pictures are either shown alternately (double or triple flash systems) at 48 fps or, on 4k systems, both left and right eye pictures are shown simultaneously, one above the other, at 24 fps. In triple flash systems, active shutter glasses are required whereas optical filtering such as circular polarisation is used in conjunction with passive glasses on polarized systems. Since the maximum bit rate is always 250 Mbit/s, this results in a net 125 Mbit/s for single frame, but the visual quality decrease is generally unnoticeable. == D-Box == D-Box codes for motion controlled seating (labelled as "Motion Data" in the DCP specification), if present, are stored as a monoaural WAV file on Sound Track channel 13. Motion Data tracks are unencrypted and not watermarked. == Creation == Most film producers and distributors rely on digital cinema encoding facilities to produce and quality control check a digital cinema package before release. Facilities follow strict guidelines set out in the DCI recommendations to ensure compatibility with all digital cinema equipment. For bigger studio release films, the facility will usually create a Digital Cinema Distribution Master (DCDM). A DCDM is the post-production step prior to a DCP. The frames are in XYZ TIFF format and both sound and picture are not yet wrapped into MXF files. A DCP can be encoded directly from a DCDM. A DCDM is useful for archiving purposes and also facilities can share them for international re-versioning purposes. They can easily be turned into alternative version DCPs for foreign territories. For smaller release films, the facility will usually skip the creation of a DCDM and instead encode directly from the Digital Source Master (DSM) the original film supplied to the encoding facility. A DSM can be supplied in a multitude of formats and color spaces. For this reason, the encoding facility needs to have extensive knowledge in color space handling including, on occasion, the use of 3D LUTs to carefully match the look of the finished DCP to a celluloid film print. This can be a highly involved process in which the DCP and the film print are "butterflied" (shown side by side) in a highly calibrated cinema. Less demanding DCPs are encoded from tape formats such as HDCAM SR. Quality control checks are always performed in calibrated cinemas and carefully checked for errors. QC checks are often attended by colorists, directors, sound mixers and other personnel to check for correct picture and sound reproduction in the finished DCP. == Accessibility == === Hearing impaired audio === A Hearing Impaired (HI) audio track is designed for people who are hearing-impaired to better hear dialog. Moviegoers can wear headphones which play this audio track synchronized with the film. Hearing Impaired audio is stored in the DCP on Sound Track channel 7. === Audio description === Audio description is narration for people who are blind or visually impaired. Audio description is stored in the DCP as "Visually Impaired-Native" (VI-N) audio on Sound Track channel 8. === Sign Language Video === A Sign Language Video track can be included in a DCP to allow for display of sign la

  Read more →
• 

  Military communications

  Military communications or military signals involve all aspects of communications, or conveyance of information, by armed forces. Examples from Jane's Military Communications include text, audio, facsimile, tactical ground-based communications, naval signalling, terrestrial microwave, tropospheric scatter, satellite communications systems and equipment, surveillance and signal analysis, security, direction finding and jamming. The most urgent purposes are to communicate information to commanders and orders from them. Military communications span from pre-history to the present. The earliest military communications were delivered by runners. Later, communications progressed to visual signals. For example, Naval ships would use flag signaling to communicate from ship to ship. These flags are a uniform set of easily identifiable nautical codes that would convey visual messages and codes between ships and from ship to shore. Then militaries discovered methods to use audible signaling to communicate with each other. This way of communicating was possible because of telegraphs. They are an electronic device that is used by a sender and when the sender presses on the telegraph key, they interrupt the current creating an audible pulse that is heard at the receiving station. The receiver then decodes the pulses to decode the messages. Since then, military communication has evolved and advanced much further. Today, there are many perspectives used to examine how troops around the world communicate. Anthony King states how Military sociologists have attempted to explain how military institutions develop and maintain high levels of social cohesion. == History == In past centuries communicating a message usually required someone to go to the destination, bringing the message. Thus, the term communication often implied the ability to transport people and supplies. A place under siege was one that lost communication in both senses. The association between transport and messaging declined in recent centuries. The first military communications involved the use of runners or the sending and receiving of simple signals (sometimes encoded to be unrecognizable). The first distinctive uses of military communications were called semaphore. Modern units specializing in these tactics are usually designated as signal corps. The Roman system of military communication (cursus publicus or cursus vehicularis) is an early example of this. Later, the terms signals and signaller became words referring to a highly-distinct military occupation dealing with general communications methods (similar to those in civil use) rather than with weapons. Present-day military forces of an informational society conduct intense and complicated communicating activities on a daily basis, using modern telecommunications and computing methods. Only a small portion of these activities are directly related to combat actions. Modern concepts of network-centric warfare (NCW) rely on network-oriented methods of communications and control to make existing forces more effective. == Military communications equipment == Drums, horns, flags, and riders on horseback were some of the early methods the military used to send messages over distances. The advent of distinctive signals led to the formation of the signal corps, a group specialized in the tactics of military communications. The signal corps evolved into a distinctive occupation where the signaller became a highly technical job dealing with all available communications methods including civil ones. In the middle 20th century radio equipment came to dominate the field. Many modern pieces of military communications equipment are built to both encrypt and decode transmissions and survive rough treatment in hostile climates. They use different frequencies to send signals to other radio stations to communicate. Radios have played a major role in military communication. Since they are capable of sending radio waves to transmit voice signals over long distances. This can be helpful for communication on the battlefield since it is a good way to send messages undetected over long distances. Radios are also very reliable because even in harsh weather conditions they are still able to help communicate among the soldiers. Militaries still use radios and continue to improve the technology because of their durability and reliability for military communication. Spelling alphabets such as the NATO phonetic alphabet are used to aid radio communications by reducing ambiguity between letters. Military communications – or "comms" – are activities, equipment, techniques, and tactics used by the military in some of the most hostile areas of the earth and in challenging environments such as battlefields, on land (compare radio in a box), underwater and also in air. Military comms include command, control and communications and intelligence and were known as the C3I model before computers were fully integrated. The U.S. Army expanded the model to C4I when it recognized the vital role played by automated computer equipment to send and receive large, bulky amounts of data. In the modern world, most nations attempt to minimize the risk of war caused by miscommunication or inadequate communication. As a result, military communication is intense and complicated and often motivates the development of advanced technology for remote systems such as satellites. Satellites have been improving and are being used more and more for communication. They are being made to have higher transmission capacity to help with their communication abilities. The military is upgrading satellites to be immune to interference during combat operations. This advancement will establish stable, high-quality information highways for long distance communication. Aircraft are also beneficial for communication, both crewed and uncrewed, as well as computers. Computers and their varied applications have revolutionized military comms. Although military communication is designed for warfare, it also supports intelligence-gathering and communication between adversaries, and thus sometimes prevents war. The six categories of military comms are: alert measurement systems cryptography military radio systems command and control signal corps network-centric warfare The alert measurement systems are various states of alertness or readiness for the armed forces used around the world during a state of war, act of terrorism or a military attack against a state. They are known by different acronyms, such as DEFCON, or defense readiness condition, used by the U.S. Armed Forces. Cryptography is the study of methods of converting messages to a form unreadable except to one who knows how to decrypt them. This ancient military comms art gained new importance with the rise of radio systems whose signals traveled far and were easily intercepted. Cryptographic software is also widely used in civilian commerce. == Commercial refile == In United States military communications systems, commercial refile refers to sending a military message via a commercial communications network. The message may come from a military network, such as a tape relay network, a point-to-point telegraph network, a radio-telegraph network, or the Defense Switched Network. Commercial refiling of a message will usually require a reformatting of the message, particularly the heading.

  Read more →
• 

  Influence-for-hire

  Influence-for-hire or collective influence, refers to the economy that has emerged around buying and selling influence on social media platforms. == Overview == Companies that engage in the influence-for-hire industry range from content farms to high-end public relations agencies. Traditionally influence operations have largely been confined to public sector actors like intelligence agencies, in the influence-for-hire industry the groups conduction the operations are private with commerce being their primary consideration. However many of the clients in the influence-for-hire industry are countries or countries acting through proxies. They are often located in countries with less expensive digital labor. == History == In May 2021, Facebook took a Ukrainian influence-for-hire network offline. Facebook attributed the network to organizations and consultants linked to Ukrainian politicians including Andriy Derkach. During the COVID-19 pandemic state sponsored misinformation was spread through influence-for-hire networks. In August 2021, a report published by the Australian Strategic Policy Institute implicated the Chinese government and the ruling Chinese Communist Party in campaigns of online manipulation conducted against Australia and Taiwan using influence-for-hire.

  Read more →
• 

  Key–value database

  A key-value database, or key-value store, is a data storage paradigm designed for storing, retrieving, and managing associative arrays, a data structure more commonly known today as a dictionary. Dictionaries contain a collection of objects, or records, which in turn have many different fields within them. These records are stored and retrieved using a key that uniquely identifies the record, and is used to find the data within the database. Key-value databases differ from the better known relational databases (RDB). RDBs pre-define the data structure in the database as a series of tables containing fields with well-defined data types. Exposing the data types to the database program allows it to apply various optimizations. In contrast, key-value systems treat the value as opaque to the database itself, and typically support only simple operations such as storing, retrieving, updating, and deleting a value by its key. This offers considerable flexibility and makes such systems well suited to low-latency, high-throughput workloads dominated by direct key lookups, but less suitable for applications that require complex queries or explicit relationships among records. A lack of standardization, limited transaction support, and relatively simple query interfaces long restricted many key-value systems to specialized uses, but the rapid move to cloud computing after 2010 helped drive renewed interest in them as part of the broader NoSQL movement. Some graph databases, such as ArangoDB, are also key–value databases internally, adding the concept of relationships (pointers) between records as a first-class data type. == Types and examples == Key–value systems span a wide consistency spectrum, from eventually consistent designs to strongly consistent or serializable ones, and some allow the consistency level to be configured as part of the trade-off against latency and availability. Renewed interest in key–value and other NoSQL systems was driven in part by the demands of big data, distributed, and cloud applications. Their scalability and availability made them attractive for cloud data management, although limited transaction support, low-level query interfaces, and the lack of standardization remained obstacles to wider adoption. Some maintain data in memory (RAM), while others employ solid-state drives or rotating disks. Some key–value systems add additional structure to their keys. For example, Oracle NoSQL Database organizes records using composite keys with "major" and "minor" components, an arrangement that Oracle compares to a directory-path structure in a file system. More generally, however, key–value stores are defined by their use of unique keys associated with opaque values and by their emphasis on simple key-based operations. Unix included dbm (database manager), a minimal database library written by Ken Thompson for managing associative arrays with a single key and hash-based access. Later implementations and related libraries included sdbm, GNU dbm (gdbm), and Berkeley DB. A more recent example is RocksDB, a persistent key–value storage engine developed at Facebook and designed for large-scale applications. Other examples include in-memory systems such as Memcached and Redis, and persistent systems such as Berkeley DB, Riak, and Voldemort.

  Read more →
• 

  Information Age

  The Information Age is a historical period that began in the mid-20th century. It is characterized by a rapid shift from traditional industries, as established during the Industrial Revolution, to an economy centered on information technology. The onset of the Information Age has been linked to the development of the transistor in 1947. Advances in computer miniaturization, internet communication, and semiconductor technology enabled the rapid expansion of digital systems and global information networks. The Information Age transformed industries such as education, healthcare, finance, entertainment, and communication through digital infrastructure and connected technologies. The rise of smartphones and cloud-based services further accelerated global internet accessibility and digital interaction. == Digital applications and mobile technology == The expansion of Android and iOS ecosystems during the 21st century contributed to the widespread use of utility applications and mobile productivity tools. Applications related to calculations, scheduling, digital organization, and educational support became increasingly common on smartphones and tablets. Mobile utility software demonstrates how modern digital platforms support accessibility and everyday online services. Independent developers have contributed to this technological ecosystem through lightweight applications focused on mobile usability and internet-based functionality. == Influence on modern society == The Information Age has reshaped the way individuals communicate, consume information, and interact with digital services. Social media platforms, artificial intelligence systems, cloud storage, and mobile computing continue to influence modern economies and online communities worldwide. Emerging technologies such as the Internet of things, machine learning, and advanced automation are often associated with the transition toward the Fourth Industrial Revolution. == History == The digital revolution converted technology from analog format to digital format. By doing this, it became possible to make copies that were identical to the original. In digital communications, for example, repeating hardware was able to amplify the digital signal and pass it on with no loss of information in the signal. Of equal importance to the revolution was the ability to easily move the digital information between media and to access or distribute it remotely. One turning point of the revolution was the change from analog to digitally recorded music. During the 1980s, the digital format of optical compact discs gradually replaced analog formats, such as vinyl records and cassette tapes, as the popular medium of choice. === Previous inventions === Humans have manufactured tools for counting and calculating since ancient times, such as the abacus, astrolabe, equatorium, and mechanical timekeeping devices. More complicated devices started appearing in the 1600s, including the slide rule and mechanical calculators. By the early 1800s, the Industrial Revolution had produced mass-market calculators like the arithmometer and the enabling technology of the punch card. Charles Babbage proposed a mechanical general-purpose computer called the Analytical Engine, but it was never successfully built, and was largely forgotten by the 20th century, and unknown to most of the inventors of modern computers. The Second Industrial Revolution, in the last quarter of the 19th century, developed useful electrical circuits and the telegraph. In the 1880s, Herman Hollerith developed electromechanical tabulating and calculating devices using punch cards and unit record equipment, which became widespread in business and government. Meanwhile, various analog computer systems used electrical, mechanical, or hydraulic systems to model problems and calculate answers. These included an 1872 tide-predicting machine, differential analysers, perpetual calendar machines, the Deltar for water management in the Netherlands, network analyzers for electrical systems, and various machines for aiming military guns and bombs. The construction of problem-specific analog computers continued in the late 1940s and beyond, with FERMIAC for neutron transport, Project Cyclone for various military applications, and the Phillips Machine for economic modeling. Building on the complexity of the Z1 and Z2, German inventor Konrad Zuse used electromechanical systems to complete in 1941 the Z3, the world's first working programmable, fully automatic digital computer. Also, during World War II, Allied engineers constructed electromechanical bombes to break the German Enigma machine encoding. The base-10 electromechanical Harvard Mark I was completed in 1944, and was to some degree improved with inspiration from Charles Babbage's designs. === 1947–1969: Origins === In 1947, the first working transistor, the germanium-based point-contact transistor, was invented by John Bardeen and Walter Houser Brattain while working under William Shockley at Bell Labs. This led the way to more advanced digital computers. From the late 1940s, universities, the military, and businesses developed computer systems to digitally replicate and automate previously manually performed mathematical calculations, with the LEO being the first commercially available general-purpose computer. Digital communication became economical for widespread adoption after the invention of the personal computer in the 1970s. Claude Shannon, a Bell Labs mathematician, is generally credited with laying the foundations of digitalization in his pioneering 1948 article, A Mathematical Theory of Communication. In 1948, Bardeen and Brattain patented an insulated-gate transistor (IGFET) with an inversion layer. Their concept forms the basis of CMOS and DRAM technology today. In 1957, at Bell Labs, Frosch and Derick were able to manufacture planar silicon dioxide transistors, later a team at Bell Labs demonstrated a working MOSFET. The first integrated circuit milestone was achieved by Jack Kilby in 1958. Other important technological developments included the invention of the monolithic integrated circuit chip by Robert Noyce at Fairchild Semiconductor in 1959, made possible by the planar process developed by Jean Hoerni. In 1963, complementary MOS (CMOS) was developed by Chih-Tang Sah and Frank Wanlass at Fairchild Semiconductor. The self-aligned gate transistor, which further facilitated mass production, was invented in 1966 by Robert Bower at Hughes Aircraft and independently by Robert Kerwin, Donald Klein, and John Sarace at Bell Labs. In 1962, AT&T deployed the T-carrier for long-haul pulse-code modulation (PCM) digital voice transmission. The T1 format carried 24 pulse-code modulated, time-division multiplexed speech signals, each encoded in 64 kbit/s streams, leaving 8 kbit/s of framing information, which facilitated the synchronization and demultiplexing at the receiver. Over the subsequent decades, the digitisation of voice became the norm for all but the last mile (where analogue continued to be the norm right into the late 1990s). Following the development of MOS integrated circuit chips in the early 1960s, MOS chips reached higher transistor density and lower manufacturing costs than bipolar integrated circuits by 1964. MOS chips further increased in complexity at a rate predicted by Moore's law, leading to large-scale integration (LSI) with hundreds of transistors on a single MOS chip by the late 1960s. The application of MOS LSI chips to computing was the basis for the first microprocessors, as engineers began recognizing that a complete computer processor could be contained on a single MOS LSI chip. In 1968, Fairchild engineer Federico Faggin improved MOS technology with his development of the silicon-gate MOS chip, which he later used to develop the Intel 4004, the first single-chip microprocessor. It was released by Intel in 1971 and laid the foundations for the microcomputer revolution that began in the 1970s. MOS technology also led to the development of semiconductor image sensors suitable for digital cameras. The first such image sensor was the charge-coupled device, developed by Willard S. Boyle and George E. Smith at Bell Labs in 1969, based on MOS capacitor technology. === 1969–1989: Invention of the internet, rise of home computers === The public was first introduced to the concepts that led to the Internet when a message was sent over the ARPANET in 1969. Packet switched networks such as ARPANET, Mark I, CYCLADES, Merit Network, Tymnet, and Telenet, were developed in the late 1960s and early 1970s using a variety of protocols. The ARPANET in particular led to the development of protocols for internetworking, in which multiple separate networks could be joined into a network of networks. The Whole Earth movement of the 1960s advocated the use of new technology. In the 1970s, the home computer was introduced, time-sharing computers, the video game console, the first coin-op vide

  Read more →
• 

  Raseef22

  Raseef22 (Arabic: رصيف22) is a liberal Arabic media network founded in 2013 based in Beirut, Lebanon. It publishes content in Arabic and English from different Arab states and describes itself as an independent media platform. International Media Support mentions Raseef22 along with HuffPost Arabic and Al Jazeera as one of the biggest Pan-Arab online platforms. == Name == The Arabic word raseef (رَصِيف) means platform or pavement, and the number 22 refers to the number of states in the Arab League. == History == Kareem Sakka co-founded Raseef22 in the aftermath of the Arab Spring, which he cites as a source of inspiration. In an article in The Washington Post, he wrote that Raseef22 was created as a "digital space for those eager to know what was going on around them." Raseef22 was one of the 500 websites censored in Egypt in late 2017 after it published an article on Egyptian security agencies' vies to influence the media. After the site was blocked in Egypt, it was targeted in a cyber attack that took it offline in locations around the world. Jamal Khashoggi wrote for Raseef22 regularly. One of his notable articles was "Notes on the Freedom of the Arabs from Oslo, Norway," published June 5, 2018. The site was blocked in Saudi Arabia December 2018 when the Saudi Ministry of Communications and Information Technology ordered its censorship due to its "unprecedented response to the assassination of Jamal Khashoggi in Istanbul." This decision might have also been related to Raseef22's coverage of Saudi-Israeli relations and interviews with activists later imprisoned or placed under house arrest coverage In 2019 the Association of LGBT Journalists (AJL) in Paris gave Raseef22 a golden foreign press award for its six-month series of articles on gender and sexuality issues. == Readership == According to its publisher in 2019, the news agency counted 12 million readers annually from 22 Arab nations. Of the readership, he wrote that it "believes in the talent and promise of the Arab mind and sees the ugliness of tyranny, patriarchy, misogyny and the futility of proxy rulers and wars." Al-Quds Al-Arabi described Raseef22 as "oriented to the youth."

  Read more →
• 

  LTE Advanced

  LTE Advanced, also named or recognized as LTE+, LTE-A or 4G+, is a 4G mobile cellular communication standard developed by 3GPP as a major enhancement of the Long Term Evolution (LTE) standard. Three technologies from the LTE-Advanced tool-kit – carrier aggregation, 4x4 MIMO and 256QAM modulation in the downlink – if used together and with sufficient aggregated bandwidth, can deliver maximum peak downlink speeds approaching, or even exceeding, 1 Gbit/s. This is significantly more than the peak 300 Mbit/s rate offered by the preceding LTE standard. Later developments have resulted in LTE Advanced Pro (or 4.9G) which increases bandwidth even further. The first ever LTE Advanced network was deployed in 2013 by SK Telecom in South Korea. In August 2019, the Global mobile Suppliers Association (GSA) reported that there were 304 commercially launched LTE-Advanced networks in 134 countries. Overall, 335 operators are investing in LTE-Advanced (in the form of tests, trials, deployments or commercial service provision) in 141 countries. == Name == LTE Advanced is also named (indicated as) LTE+, LTE-A, or (on Samsung Galaxy and Xiaomi smartphones) as 4G+. Such networks have also often been described as ‘Gigabit LTE networks’ mirroring a term that is also used in the fixed broadband industry. == History == The mobile communication industry and standards organizations have therefore started work on 4G access technologies, such as LTE Advanced. At a workshop in April 2008 in China, 3GPP agreed the plans for work on Long Term Evolution (LTE). A first set of specifications were approved in June 2008. Besides the peak data rate 1 Gb/s as defined by the ITU-R, it also targets faster switching between power states and improved performance at the cell edge. Detailed proposals are being studied within the working groups. The LTE+ format was first proposed by NTT DoCoMo of Japan and has been adopted as the international standard. It was formally submitted as a candidate 4G to ITU-T in late 2009 as meeting the requirements of the IMT-Advanced standard, and was standardized by the 3rd Generation Partnership Project (3GPP) in March 2011 as 3GPP Release 10. The work by 3GPP to define a 4G candidate radio interface technology started in Release 9 with the study phase for LTE-Advanced. Being described as a 3.9G (beyond 3G but pre-4G), the first release of LTE did not meet the requirements for 4G (also called IMT Advanced as defined by the International Telecommunication Union) such as peak data rates up to 1 Gb/s. The ITU has invited the submission of candidate Radio Interface Technologies (RITs) following their requirements in a circular letter, 3GPP Technical Report (TR) 36.913, "Requirements for Further Advancements for E-UTRA (LTE-Advanced)." These are based on ITU's requirements for 4G and on operators’ own requirements for advanced LTE. Major technical considerations include the following: Continual improvement to the LTE radio technology and architecture Scenarios and performance requirements for working with legacy radio technologies Backward compatibility of LTE-Advanced with LTE. An LTE terminal should be able to work in an LTE-Advanced network and vice versa. Any exceptions will be considered by 3GPP. Consideration of recent World Radiocommunication Conference (WRC-07) decisions regarding frequency bands to ensure that LTE-Advanced accommodates the geographically available spectrum for channels above 20 MHz. Also, specifications must recognize those parts of the world in which wideband channels are not available. Likewise, 'WiMAX 2', 802.16m, has been approved by ITU as the IMT Advanced family. WiMAX 2 is designed to be backward compatible with WiMAX 1 devices. Most vendors now support conversion of 'pre-4G', pre-advanced versions and some support software upgrades of base station equipment from 3G. == Proposals == The target of 3GPP LTE Advanced is to reach and surpass the ITU requirements. LTE Advanced should be compatible with first release LTE equipment, and should share frequency bands with first release LTE. In the feasibility study for LTE Advanced, 3GPP determined that LTE Advanced would meet the ITU-R requirements for 4G. The results of the study are published in 3GPP Technical Report (TR) 36.912. One of the important LTE Advanced benefits is the ability to take advantage of advanced topology networks; optimized heterogeneous networks with a mix of macrocells with low power nodes such as picocells, femtocells and new relay nodes. The next significant performance leap in wireless networks will come from making the most of topology, and brings the network closer to the user by adding many of these low power nodes – LTE Advanced further improves the capacity and coverage, and ensures user fairness. LTE Advanced also introduces multicarrier to be able to use ultra wide bandwidth, up to 100 MHz of spectrum supporting very high data rates. In the research phase many proposals have been studied as candidates for LTE Advanced (LTE-A) technologies. The proposals could roughly be categorized into: Support for relay node base stations Coordinated multipoint (CoMP) transmission and reception UE Dual TX antenna solutions for SU-MIMO and diversity MIMO, commonly referred to as 2x2 MIMO Scalable system bandwidth exceeding 20 MHz, up to 100 MHz Carrier aggregation of contiguous and non-contiguous spectrum allocations Local area optimization of air interface Nomadic / Local Area network and mobility solutions Flexible spectrum usage Cognitive radio Automatic and autonomous network configuration and operation Support of autonomous network and device test, measurement tied to network management and optimization Enhanced precoding and forward error correction Interference management and suppression Asymmetric bandwidth assignment for FDD Hybrid OFDMA and SC-FDMA in uplink UL/DL inter eNB coordinated MIMO SONs, Self Organizing Networks methodologies Within the range of system development, LTE-Advanced and WiMAX 2 can use up to 8x8 MIMO and 128-QAM in downlink direction. Example performance: 100 MHz aggregated bandwidth, LTE-Advanced provides almost 3.3 Gbit peak download rates per sector of the base station under ideal conditions. Advanced network architectures combined with distributed and collaborative smart antenna technologies provide several years road map of commercial enhancements. The 3GPP standards Release 12 added support for 256-QAM. A summary of a study carried out in 3GPP can be found in TR36.912. == Timeframe and introduction of additional features == Original standardization work for LTE-Advanced was done as part of 3GPP Release 10, which was frozen in April 2011. Trials were based on pre-release equipment. Major vendors support software upgrades to later versions and ongoing improvements. In order to improve the quality of service for users in hotspots and on cell edges, heterogeneous networks (HetNets) are formed of a mixture of macro-, pico- and femto base stations serving corresponding-size areas. Frozen in December 2012, 3GPP Release 11 concentrates on better support of HetNet. Coordinated Multi-Point operation (CoMP) is a key feature of Release 11 in order to support such network structures. Whereas users located at a cell edge in homogenous networks suffer from decreasing signal strength compounded by neighbor cell interference, CoMP is designed to enable use of a neighboring cell to also transmit the same signal as the serving cell, enhancing quality of service on the perimeter of a serving cell. In-device Co-existence (IDC) is another topic addressed in Release 11. IDC features are designed to ameliorate disturbances within the user equipment caused between LTE/LTE-A and the various other radio subsystems such as WiFi, Bluetooth, and the GPS receiver. Further enhancements for MIMO such as 4x4 configuration for the uplink were standardized. The higher number of cells in HetNet results in user equipment changing the serving cell more frequently when in motion. The ongoing work on LTE-Advanced in Release 12, amongst other areas, concentrates on addressing issues that come about when users move through HetNet, such as frequent hand-overs between cells. It also included use of 256-QAM. == First technology demonstrations and field trials == This list covers technology demonstrations and field trials up to the year 2014, paving the way for a wider commercial deployment of the VoLTE technology worldwide. From 2014 onwards various further operators trialled and demonstrated the technology for future deployment on their respective networks. These are not covered here. Instead a coverage of commercial deployments can be found in the section below. == LTE Advanced Pro == LTE Advanced Pro (LTE-A Pro, also known as 4.5G, 4.5G Pro, 4.9G, Pre-5G, 5G Project) is a name for 3GPP release 13 and 14. It is an evolution of LTE Advanced (LTE-A) cellular standard supporting data rates in excess of 3 Gbit/s using 32-carrier aggregation. It also introduces th

  Read more →
• 

  Aarogya Setu

  Aarogya Setu (lit. 'The bridge to health') is an Indian COVID-19 "contact tracing, syndromic mapping and self-assessment" digital service, primarily a mobile app, developed by the National Informatics Centre under the Ministry of Electronics and Information Technology (MeitY). The app reached more than 100 million installs in 40 days. On 26 May, amid growing privacy and security concerns, the source code of the app was made public. == Full view == The stated purpose of this app is to spread awareness of COVID-19 and to connect essential COVID-19-related health services to the people of India. This app augments the initiatives of the Department of Health to contain COVID-19 and shares best practices and advisories. It is a tracking app which uses the smartphone's GPS and Bluetooth features to track COVID-19 cases. The app is available for Android and iOS mobile operating systems. With Bluetooth, it tries to determine the risk if one has been near (within six feet of) a COVID-19-infected person, by scanning through a database of known cases across India. Using location information, it determines whether the location one is in belongs to one of the infected areas based on the data available. This app is an updated version of an earlier app called Corona Kavach (now discontinued) which was released earlier by the Government of India. == Features and tools == Aarogya Setu has four sections: User Status (tells the risk of getting COVID-19 for the user) Self Assess (helps the users identify COVID-19 symptoms and their risk profile) COVID-19 Updates (gives updates on local and national COVID-19 cases) E-pass integration (if applied for E-pass, it will be available) See Recent Contacts option (allows the users to assess the risk level of their Bluetooth contacts) It tells how many COVID-19 positive cases are likely in a radius of 500 m, 1 km, 2 km, 5 km and 10 km from the user. The app is built on a platform that can provide an application programming interface (API) so that other computer programs, mobile applications, and web services can make use of the features and data available in Aarogya Setu. == Response == Aarogya Setu crossed five million downloads within three days of its launch, making it one of the most popular government apps in India. It became the world's fastest-growing mobile app, beating Pokémon Go, with more than 50 million installs 13 days after launching in India on 2 April 2020. It reached 100 million installs by 13 May 2020, that is in 40 days since its launch. In an order on 29 April 2020 the central government made it mandatory for all employees to download the app and use it – "Before starting for office, they must review their status on Aarogya Setu and commute only when the app shows safe or low risk". The Union Home Ministry also said that the application is mandatory for all living in the COVID-19 containment zone. The government gave the announcement along with the nationwide lockdown extension by two weeks from the 4 May with certain relaxations. On 21 May 2020, the Airport Authority of India issued a Standard Operating Procedure (SOP) stating that all departing passengers must compulsorily be registered with the Aarogya Setu app. It added that the app would not be mandatory for children below 14 years. However, the next day, Civil Aviation Minister Hardeep Singh Puri clarified that the app would not be mandatory for any passengers. On 26 May 2020, the Aarogya Setu app code was made open to developers across the globe to help other countries manage contact tracing in their fight against COVID-19 pandemic. In March 2021, Co-WIN portal was integrated with the app. This allowed users to schedule an appointment through the app for COVID-19 vaccine by registering their phone number and providing relevant documents. == Effectiveness == NITI Aayog CEO revealed that "the app has been able to identify more than 3,000 hotspots in 3–17 days ahead of time." However, users and experts in India and around the world say the app raises huge data security concerns. The app collects name, number, gender, travel history, and uses a phone's Bluetooth and location data to let users know if they have been near a person with COVID-19 by scanning a database of known cases of infection, and also share it with the government simultaneously. This is the major area of concern as the app's constant access to a phone's Bluetooth imposes a form of security threat. But it stood to clarify itself that the informations received are not going to be made public. Amidst all these, the app hits a record of about one-hundred million downloads. == Reception == Rahul Gandhi, leader of the Congress party, termed the Aarogya Setu application a "sophisticated surveillance system" after the government announced that downloading the app would be mandatory for both government and private employees. Following this, others raised the same concerns about the Aarogya Setu app. The Ministry of Electronics and Information Technology (MeitY) responded to these concerns by asserting that Gandhi's claims were false, and that the app was being appreciated internationally. On 5 May, French ethical hacker Robert Baptiste, who goes by the name Elliot Alderson on Twitter, claimed that there were security issues with the app. The Indian government, as well as the app developers, responded to this claim by thanking the hacker for his attention, but dismissed his concerns. The developers of the app stated that the fetching of location data is a documented feature of the app, rather than a flaw, since the app is designed to track the distribution of the virus-infected population. They also asserted that no personal information of any user has been proven to be at risk. On 6 May, Robert Baptiste tweeted that security vulnerabilities in Aarogya Setu allowed hackers to "know who is infected, unwell, [or] made a self assessment in the area of his choice". He also gave details of how many people were unwell and infected at the Prime Minister's Office, the Indian Parliament and the Home Office. The Economic Times pointed out that a clause in the app's Terms and Conditions stated that the user "agrees and acknowledges that the Government of India will not be liable for ... any unauthorised access to your information or modification thereof". In response, several software developers called for the source code to be made public. On 12 May, former Supreme Court Judge Justice B.N. Srikrishna termed the government's push mandating the use of Aarogya Setu app "utterly illegal". He said so far it is not backed by any law and questioned "under what law, government is mandating it on anyone". MIT Technology Review gave 2 out of 5 stars to Aarogya Setu app after analyzing the COVID contact tracing apps launched in 25 countries. The app got stars only for the policy which suggests that data collected is deleted after a period of time and that the data collection, as far as user inputs go, is minimal. It also highlighted that India is the only democracy making its app mandatory for millions of people. The rating was further downgraded from 2 to 1 for collecting more information than the app needs to function. Following this, the MeitY made the source code of the Android app public on GitHub on 26 May, which will be followed by iOS and API documentation. Further, the Government has also launched a "bug bounty program". This was done to "promote transparency and ensure security and integrity of the app". However, experts stated that the server-side code had not yet been publicly released, which meant that public opinion on security and privacy was yet to be completely assuaged. Following this, ZDNet noted that the source code seemed to confirm the government's claim that user location data, if collected, would be anonymised and would be deleted after 45 days, or 60 days for high-risk individuals.

  Read more →
• 

  WEA Manufacturing

  WEA Manufacturing was the record, tape, and compact disc manufacturing arm of WEA International Inc. from 1978 to 2003, when it was sold and merged into Cinram International, a previous competitor. The last owner when the plant closed was Technicolor. == History == WEA Manufacturing Inc. was created in 1978–1979 when Warner Communications Inc. purchased two of its longtime suppliers: the record pressing plants Specialty Records Corporation (Olyphant, Pennsylvania) and Allied Record Company (Los Angeles). The company was headquartered in Olyphant, where the original plant was replaced in late 1981 by a new facility which retained the name Specialty Records Corporation. The Specialty Records Corporation name was dropped in 1996 in favor of WEA Manufacturing. The company invested in CD manufacturing in 1986, matching a $247,000 contribution by economic development corporation Ben Franklin Technology Partners to develop and implement new processes of manufacturing audio CDs and CD-ROMs. BFTP assembled a team of experts in physics, electrical engineering, and thin film technology from the University of Scranton and Lehigh University to carry out the research and development. The Olyphant plant and another plant in Alsdorf, Germany, were expanded to support CD pressing that year, with the Olyphant facility's production commencing first in September 1986. WEA Manufacturing grew to become one of the largest manufacturers of recorded media in the world. The company began manufacturing Laserdiscs in July 1991. The company's DVD division, Warner Advanced Media Operations (WAMO), helped design the high-density format used in DVDs, and manufactured some of the first DVDs in the late 1990s. The company was sold to Cinram International in October 2003 and no longer exists under the name WEA Manufacturing, but the Olyphant plant continued to operate under its new ownership. In 2005, the company was Lackawanna County's largest employer, with over 2,300 people working at the Olyphant plant. Cinram closed the former Allied plant in 2006, while Technicolor (which purchased Cinram's assets in 2015) closed the Olyphant plant in 2018. == Patents == WEA Manufacturing held U.S. patents related to compact disc manufacture: Print scanner, (1993). Interference of converging spherical waves with application to the design of light-readable information-recording media and systems for reading such media, (2004). Method of manufacturing a composite disc structure and apparatus for performing the method, (2005). Methods and apparatus for reducing the shrinkage of an optical disc's clamp area and the resulting optical disc, (2005). == Litigation == In 1990, WEA Manufacturing was sued by a Canadian firm, Optical Recording Co. (ORC), for alleged infringement of two 1971 patents related to glass mastering equipment which was used by Time Warner and WEA Manufacturing in the manufacture of approximately 450 million CDs. ORC contended that unlike five other major CD manufacturers in the U.S., Time Warner had refused to license the technology from ORC. In 1992, a jury assessed damages of 6 cents per disc, plus $4–5 million in interest.

  Read more →
• 

  Web API

  A web API is an application programming interface (API) for either a web server or a web browser. As a web development concept, it can be related to a web application's client side (including any web frameworks being used). A server-side web API consists of one or more publicly exposed endpoints to a defined request–response message system, typically expressed in JSON or XML by means of an HTTP-based web server. A server API (SAPI) is not considered a server-side web API, unless it is publicly accessible by a remote web application. == Client side == A client-side web API is a programmatic interface to extend functionality within a web browser or other HTTP client. Originally these were most commonly in the form of native plug-in browser extensions however most newer ones target standardized JavaScript bindings. The Mozilla Foundation created their WebAPI specification which is designed to help replace native mobile applications with HTML5 applications. Google created their Native Client architecture which is designed to help replace insecure native plug-ins with secure native sandboxed extensions and applications. They have also made this portable by employing a modified LLVM AOT compiler. == Server side == A server-side web API consists of one or more publicly exposed endpoints to a defined request–response message system, typically expressed in JSON or XML. The web API is exposed most commonly by means of an HTTP-based web server. Mashups are web applications which combine the use of multiple server-side web APIs. Webhooks are server-side web APIs that take input as a Uniform Resource Identifier (URI) that is designed to be used like a remote named pipe or a type of callback such that the server acts as a client to dereference the provided URI and trigger an event on another server which handles this event thus providing a type of peer-to-peer IPC. === Endpoints === Endpoints are important aspects of interacting with server-side web APIs, as they specify where resources can be accessed by third-party software. Usually the access is via a URI to which HTTP requests are posted, and from which the response is thus expected. Web APIs may be public or private, the latter of which requires an access token. Endpoints need to be static, otherwise the correct functioning of software that interacts with them cannot be guaranteed. If the location of a resource changes (and with it the endpoint) then previously written software will break, as the required resource can no longer be found at the same place. As API providers still want to update their web APIs, many have introduced a versioning system in the URI that points to an endpoint. === Resources versus services === Web 2.0 Web APIs often use machine-based interactions such as REST and SOAP. RESTful web APIs use HTTP methods to access resources via URL-encoded parameters, and use JSON or XML to transmit data. By contrast, SOAP protocols are standardized by the W3C and mandate the use of XML as the payload format, typically over HTTP. Furthermore, SOAP-based Web APIs use XML validation to ensure structural message integrity, by leveraging the XML schemas provisioned with WSDL documents. A WSDL document accurately defines the XML messages and transport bindings of a Web service. === Documentation === Server-side web APIs are interfaces for the outside world to interact with the business logic. For many companies this internal business logic and the intellectual property associated with it are what distinguishes them from other companies, and potentially what gives them a competitive edge. They do not want this information to be exposed. However, in order to provide a web API of high quality, there needs to be a sufficient level of documentation. One API provider that not only provides documentation, but also links to it in its error messages is Twilio. However, there are now directories of popular documented server-side web APIs. === Growth and impact === The number of available web APIs has grown consistently over the past years, as businesses realize the growth opportunities associated with running an open platform, that any developer can interact with. ProgrammableWeb tracks over 24000 Web APIs that were available in 2022, up from 105 in 2005. Web APIs have become ubiquitous. There are few major software applications/services that do not offer some form of web API. One of the most common forms of interacting with these web APIs is via embedding external resources, such as tweets, Facebook comments, YouTube videos, etc. In fact there are very successful companies, such as Disqus, whose main service is to provide embeddable tools, such as a feature-rich comment system. Any website of the TOP 100 Alexa Internet ranked websites uses APIs and/or provides its own APIs, which is a very distinct indicator for the prodigious scale and impact of web APIs as a whole. As the number of available web APIs has grown, open source tools have been developed to provide more sophisticated search and discovery. APIs.json provides a machine-readable description of an API and its operations, and the related project APIs.io offers a searchable public listing of APIs based on the APIs.json metadata format. === Business === ==== Commercial ==== Many companies and organizations rely heavily on their Web API infrastructure to serve their core business clients. In 2014 Netflix received around 5 billion API requests, most of them within their private API. ==== Governmental ==== Many governments collect a lot of data, and some governments are now opening up access to this data. The interfaces through which this data is typically made accessible are web APIs. Web APIs allow for data, such as "budget, public works, crime, legal, and other agency data" to be accessed by any developer in a convenient manner. == Example == An example of a popular web API is the Astronomy Picture of the Day API operated by the American space agency NASA. It is a server-side API used to retrieve photographs of space or other images of interest to astronomers, and metadata about the images. According to the API documentation, the API has one endpoint: https://api.nasa.gov/planetary/apod The documentation states that this endpoint accepts GET requests. It requires one piece of information from the user, an API key, and accepts several other optional pieces of information. Such pieces of information are known as parameters. The parameters for this API are written in a format known as a query string, which is separated by a question mark character (?) from the endpoint. An ampersand (&) separates the parameters in the query string from each other. Together, the endpoint and the query string form a URL that determines how the API will respond. This URL is also known as a query or an API call. In the below example, two parameters are transmitted (or passed) to the API via the query string. The first is the required API key and the second is an optional parameter — the date of the photograph requested. https://api.nasa.gov/planetary/apod?api_key=DEMO_KEY&date=1996-12-03 Visiting the above URL in a web browser will initiate a GET request, calling the API and showing the user a result, known as a return value or as a return. This API returns JSON, a type of data format intended to be understood by computers, but which is somewhat easy for a human to read as well. In this case, the JSON contains information about a photograph of a white dwarf star: The above API return has been reformatted so that names of JSON data items, known as keys, appear at the start of each line. The last of these keys, named url, indicates a URL which points to a photograph: https://apod.nasa.gov/apod/image/9612/ngc2440_hst2.jpg Following the above URL, a web browser user would see this photo: Although this API can be called by an end user with a web browser (as in this example) it is intended to be called automatically by software or by computer programmers while writing software. JSON is intended to be parsed by a computer program, which would extract the URL of the photograph and the other metadata. The resulting photo could be embedded in a website, automatically sent via text message, or used for any other purpose envisioned by a software developer.

  Read more →
• 

  History of RISC OS

  RISC OS, the computer operating system developed by Acorn Computers for their ARM-based Acorn Archimedes range, was originally released in 1987 as Arthur 0.20, and soon followed by Arthur 0.30, and Arthur 1.20. The next version, Arthur 2, became RISC OS 2 and was completed in September 1988 and made available in April 1989. RISC OS 3 was released with the very earliest version of the A5000 in 1991 and contained a series of new features. By 1996 RISC OS had been shipped on over 500,000 systems. RISC OS 4 was released by RISCOS Ltd (ROL) in July 1999, based on the continued development of OS 3.8. ROL had in March 1999 licensed the rights to RISC OS from Element 14 (the renamed Acorn) and eventually from the new owner, Pace Micro Technology. According to the company, over 6,400 copies of OS 4.02 on ROM were sold up until production was ceased in mid-2005. RISC OS Select was launched in May 2001 by ROL. This is a subscription scheme allowing users access to the latest OS updates. These upgrades are released as soft-loadable ROM images, separate to the ROM where the boot OS is stored, and are loaded at boot time. Select 1 was shipped in May 2002, with Select 2 following in November 2002 and the final release of Select 3 in June 2004. ROL released the ROM based OS 4.39 the same month, dubbed RISC OS Adjust as a play on the RISC OS GUI convention of calling the three mouse buttons 'Select', 'Menu' and 'Adjust'. ROL sold its 500th Adjust ROM in early 2006. RISC OS 5 was released in October 2002 on Castle Technology's Acorn clone Iyonix PC. OS 5 is a separate evolution based upon the NCOS work done by Pace for set-top boxes. In October 2006, Castle announced a source sharing license plan for elements of OS 5. This Shared Source Initiative (SSI) is managed by RISC OS Open Ltd (ROOL). RISC OS 5 has since been released under a fully free and open source Apache 2.0 license, while the older no longer maintained RISC OS 6 has not. RISC OS Six was also announced in October 2006 by ROL. This is the next generation of their stream of the operating system. The first product to be launched under the name was the continuation of the Select scheme, Select 4. A beta-version of OS 6, Preview 1 (Select 4i1), was available in 2007 as a free download to all subscribers to the Select scheme, while in April 2009 the final release of Select 5 was shipped. The latest release of RISC OS from ROL is Select 6i1, shipped in December 2009. == Arthur == The OS was designed in the United Kingdom by Acorn for the 32-bit ARM based Acorn Archimedes, and released in its first version in 1987, as the Arthur operating system. The first public release of the OS was Arthur 1.20 in June 1987. It was bundled with a desktop graphical user interface (GUI), which mostly comprises assembly language software modules, and the Desktop module itself being written in BBC BASIC. It features a colour-scheme typically described as "technicolor". The graphical desktop runs on top of a command-line driven operating system which owes much to Acorn's earlier MOS operating system for its BBC Micro range of 8-bit microcomputers. Arthur, as originally conceived, was intended to deliver similar functionality to the operating system for the BBC Master series of computers, MOS, as a reaction to the fact that a more advanced operating system research project (ARX) would not be ready in time for the Archimedes. The Arthur project team, led by Paul Fellows, was given just five months to develop it entirely from the ground up—with the directive "just make it like the BBC micro". It was intended as a stop-gap until the operating system which Acorn had under development (ARX) could be completed. However, the latter was delayed time and again, and was eventually dropped when it became apparent that the Arthur development could be extended to have a window manager and full desktop environment. Also, it was small enough to run on the first 512K machines with only a floppy disc, whereas ARX required 4 megabytes and a hard drive. The OS development was carried out using a prototype ARM-based system connected to a BBC computer, before moving onto the prototype Acorn Archimedes the A500. Arthur was not a multitasking operating system, but offered support for adding application-level cooperative multitasking. No other version of the operating system was released externally, but internally the development of the desktop and window management continued, with the addition of a cooperative multitasking system, implemented by Neil Raine, which used the memory management hardware to swap-out one task, and bring in another between call-and-return from the Wimp_Poll call that applications were obliged to make to get messages under the desktop. Reminiscent of a similar technique employed by MultiFinder on the Apple Macintosh, this transformed a single-application-at-a-time system into one that could operate a full multi-tasking desktop. This transformation took place at version 1.6 though it was not made public until released, with the name change from Arthur to RISC OS, as version 2.0. Most software made for Arthur 1.2 can be run under RISC OS 2 and later because, underneath the desktop, the original Arthur OS core, API interfaces and modular structures remain as the heart of all versions. (A few titles will not work, however, because they used undocumented features, side effects or in a few cases APIs that became deprecated). In 2011, Business Insider listed Arthur as one of ten "operating systems that time forgot". == RISC OS 2 == RISC OS was a rapid development of Arthur 1.2 after the failure of the ARX project. Given growing dissatisfaction with various bugs and limitations with Arthur, testing of what was then known as Arthur 2 was apparently ongoing during 1988 with selected software houses. At this stage, Computer Concepts, who had been prolific developers for the BBC Micro and who had begun software development for the Archimedes, had already initiated a rival operating system project, Impulse, to support their own applications (including the desktop publishing application that would eventually become Impression), stating that Arthur did not meet the "hundreds of requirements" involved including "true multi-tasking". Such an operating system was to be offered free of charge with the planned application packages, but with the release of RISC OS and Computer Concepts acknowledging that RISC OS "overcomes the old problems with Arthur", the applications were to be able to run under either RISC OS or Impulse. Impression was eventually released as a RISC OS application. Ultimately, Arthur 2 was renamed to RISC OS, and was first sold as RISC OS 2.00 in April 1989. The operating system implements co-operative multitasking with some limitations but is not multi-threaded. It uses the ADFS file system for both floppy and hard disc access. It ran from a 512 KB set of ROMs. The WIMP interface offers all the standard features and fixes many of the bugs that had hindered Arthur. It lacks virtual memory and extensive memory protection (applications are protected from each other, but many functions have to be implemented as 'modules' which have full access to the memory). At the time of release, the main advantage of the OS was its ROM; it booted very quickly and while it was easy to crash, it was impossible to permanently break the OS from software. Its high performance was due to much of the system being written in ARM assembly language. The OS was designed with users in mind, rather than OS designers. It is organised as a relatively small kernel which defines a standard software interface to which extension modules are required to conform. Much of the system's functionality is implemented in modules coded in the ROM, though these can be supplanted by more evolved versions loaded into RAM. Among the kernel facilities are a general mechanism, named the callback handler, which allows a supervisor module to perform process multiplexing. This facility is used by a module forming part of the standard editor program to provide a terminal emulator window for console applications. The same approach made it possible for advanced users to implement modules giving RISC OS the ability to do pre-emptive multitasking. A slightly updated version, RISC OS 2.01, was released later to support the ARM3 processor, larger memory capacities, and the VGA and SVGA modes provided by the Acorn Archimedes 540 and Acorn R225/R260. == RISC OS 3 == RISC OS 3 introduced a number of new features, including multitasking Filer operations, applications and fonts in ROM, no limit on number of open windows, ability to move windows off screen, safe shutdown, the Pinboard, grouping of icon bar icons, up to 128 tasks, native ability to read MS-DOS format discs and use named hard discs. Improved configuration was also included, by way of multiple windows to change the settings. RISC OS 3.00 was released with the very earliest version of the A5000 in 1991; it is almo

  Read more →
• 

  Screenpal

  ScreenPal (formerly known as Screencast-O-Matic) is cross-platform screen capture and screen recording software originally developed in 2006. == History == The company was founded by AJ Gregory in 2006 as Screencast-O-Matic. The software includes features for screen recording, screenshot capture, video editing, image editing, and a video and image hosting service. It is available for Windows and Mac operating systems, and has mobile apps for iOS and Android. The company launched a video editor in 2015. It began offering free video and image hosting in 2019, with premium hosting options for subscribers. In 2023, it was rebranded as ScreenPal.

  Read more →
• 

  Web3D

  Web3D, also called 3D Web, is a group of technologies to display and navigate websites using 3D computer graphics. These technologies enable applications such as online games, virtual reality experiences, interactive product demonstrations, and 3D data visualization directly within web browsers. The emergence of Web3D dates back to 1994, with the advent of VRML, a file format designed to store and display 3D graphical data on the World Wide Web. Modern Web3D is primarily powered by WebGL, a JavaScript API that enables hardware-accelerated 3D graphics rendering in web browsers without requiring plug-ins. == Pre-WebGL era == The emergence of Web3D dates back to 1994, with the advent of VRML, a file format designed to store and display 3D graphical data on the World Wide Web. In October 1995, at Internet World, Template Graphics Software demonstrated a 3D/VRML plug-in for the beta release of Netscape 2.0 by Netscape Communications. The Web3D Consortium was formed to further the collective development of the format. VRML and its successor, X3D, have been accepted as international standards by the International Organization for Standardization and the International Electrotechnical Commission. The main drawback of the technology was the requirement to use third-party browser plug-ins to perform 3D rendering, which slowed the adoption of the standard. Between 2000 and 2010, one of these plug-ins, Adobe Flash Player, was widely installed on desktop computers and was used to display interactive web pages and online games and to play video and audio content. Several Flash-based frameworks appeared that used software rendering and ActionScript 3 to perform 3D computations such as transformations, lighting, and texturing. Most notable among them were Papervision3D and Away3D. Eventually, Adobe developed Stage3D, an API for rendering interactive 3D graphics with GPU-acceleration for its Flash player and AIR products, which was adopted by software vendors. In 2009, an open-source 3D web technology called O3D was introduced by Google. It also required a browser plug-in, but contrary to Flash/Stage3D, was based on JavaScript API. O3D was geared not only for games but also for advertisements, 3D model viewers, product demos, simulations, engineering applications, control and monitoring systems. == WebGL and glTF == WebGL (short for "Web Graphics Library") evolved out of the Canvas 3D experiments started by Vladimir Vukićević at Mozilla Foundation. Vukićević first demonstrated a Canvas 3D prototype in 2006. By the end of 2007, both Mozilla and Opera had made their own separate implementations. In early 2009, the nonprofit technology consortium Khronos Group started the WebGL Working Group, with initial participation from Apple, Google, Mozilla, Opera, and others. Version 1.0 of the WebGL specification was released in March 2011. Major advantages of the new technology include conformity with web standards and near-native 3D performance without the use of any browser plug-ins. Since WebGL is based on OpenGL ES, it works on mobile devices without any additional abstraction layers. For other platforms, WebGL implementations leverage ANGLE to translate OpenGL ES calls to DirectX, OpenGL, or Vulkan API calls. Among notable WebGL frameworks are A-Frame, which uses HTML-based markup for building virtual reality experiences; PlayCanvas, an open-source engine alongside a proprietary cloud-hosted creation platform for building browser games; Three.js, an MIT-licensed framework used to create demoscene from the early 2000s; Unity, which obtained a WebGL back-end in version 5; and Verge3D, which integrates with Blender, 3ds Max, and Maya to create 3D web content. With the rapid adoption of WebGL, a new problem arose—the lack of a 3D file format optimized for the Web. This issue was addressed by glTF, a format that was conceived in 2012 by members of the COLLADA working group. At SIGGRAPH 2012, Khronos presented a demo of glTF, which was then called WebGL Transmissions Format (WebGL TF). On 19 October 2015, the glTF 1.0 specification was released. Version 2.0 glTF uses a physically based rendering material model, proposed by Fraunhofer. Other upgrades include sparse accessors and morph targets for techniques such as facial animation, and schema tweaks and breaking changes for corner cases or performance, such as replacing top-level glTF object properties with arrays for faster index-based access. == Future == "WebGPU" is the working name for a potential web standard and JavaScript API for accelerated graphics and computing, aiming to provide "modern 3D graphics and computation capabilities". It is developed by the W3C "GPU for the Web" Community Group, with engineers from Apple, Mozilla, Microsoft, and Google, among others. WebGPU will not be based on any existing 3D API and will use Rust-like syntax for shaders.

  Read more →
• 

  Virtual advertising

  Virtual advertising is the use of digital technology to insert virtual advertisements into a live or pre-recorded television show, often in sports events. This technique is often used to allow broadcasters to overlay existing physical advertising panels inside the sports venue with virtual content on the screen when broadcasting the same event in multiple regions; a Spanish football game can be broadcast in Mexico with Mexican advertisements. Similarly, virtual content can be inserted onto empty space within the sports venue such as the pitch, where physical advertising cannot be placed due to regulatory or safety reasons. Virtual advertising content is intended to be photorealistic, so that the viewer has the impression they are seeing the real in-stadium advertising. == History == Throughout the 1980s, 1990s, and 2000s, advertising on television and in newspapers was a popular method of spreading information. The marketer Jeremiah Lynwood stated that "Thirty years ago, [U.S.] consumers viewed an average of 560 ads per day", mostly from newspapers, television shows, gasoline pumps, and so on. Lynwood also stated that, at the time, "American consumers may be exposed to 3,000 commercial messages every day". Within that time frame, the exposure of daily ads have supported many local and big businesses. With the arrival of the 2000s and 2010s, technological advances have created new opportunities for many businesses to grow. In the 21st century, virtual advertising has been used to create virtual product placements in television shows hours, days, or years after they have been produced. Advertisements can be targeted to regional markets and updated over time to ensure maximum efficiency of advertising money. A good example of how virtual advertising is used in everyday life is in sports. Virtual advertising uses the latest technology to place an ad in position to the field of play, regardless of camera motion, and the players' movement over the logos. Recently, the NHL have virtually inserted sponsors on the glass above the physical boards in NHL stadiums. Big brands will not spend their time or money on hitting a certain region when their main goal is to build global brand awareness. Digital signage opportunities allow these larger brands to purchase signage in a stadium during games that are instead nationally televised. This gets even more expansive thanks to social media outlets like Twitter, Facebook, and Amazon. On the other hand, local businesses sign when there are smaller games going on. The signage is much more affordable and still reaches a vast number of people. Virtual advertising may even make live attendance more attractive to sport fans because the technology allows the playing field and surrounding areas to be cleared of advertisements while television viewers at home are exposed to commercials. For the most part, virtual advertising makes a live attendance more attractive to sports fans, because instead of being at home watching commercials, live fans are able to be clear of advertisements and enjoy the game without pop-up ads. == Technology == The technology used in virtual insertions often uses automated processes such as: automatic detection of playfield limits, automatic detection of cuts, recognition of playfield surface, recognition of existing logos for logo replacements, etc. An operator is usually dedicated to the visual control of the effect but new systems allow to use the instant replay operator. == Examples == === Live events === Virtual advertisements can be effectively integrated into live television in real-time. For example, Fox Sports Net places a virtual advertisement on the glass behind the goaltender that can only be seen on television. The advertising in the playfields is property of the club, except in some professional sports where the league or federation owns the advertising rights. However, the advertising rights broadcast on the screen are property of the broadcasters or the TV channel. This means that second right holders can benefit from selling this virtual advertising. The number of TV viewers is also higher than the people in the stadium, generating more visibility to the advertised marks and more income to the broadcasters. Virtual advertising was first introduced in football during the 2015 Audi Cup at the Allianz Arena in Munich. AIM Sport implemented the technology to digitally overlay advertisements on the stadium's perimeter boards, allowing different sponsors to be displayed to viewers in different broadcast regions. In Formula One, virtual ads are placed on the grass or as virtual billboards. In baseball, Major League Baseball places virtual advertisements on a back-board behind the batter which can be targeted differently in local markets or countries. During the World Series, MLB international broadcasts of the World Series feature different advertisements on a per market basis, showing a different ad in the US, Canadian, Latin American and Japanese markets. In tennis, e.g. during the 2019 ATP Finals in London's O2 Arena certain logos in the background were replaced for various country feeds. In table tennis e.g. during the ITTF World Tour Australian Open 2019 virtual advertising overlays were used by uniqFEED AG in Switzerland. Since the 2022–23 season, the National Hockey League (NHL) has used digitally enhanced dasherboards (DED) to erase and replace ads on each arena's boards with up to 120 thirty-second segments on all or part of the rink. Each broadcaster can use a different set of ads. DED were first used at the 2016 World Cup of Hockey, which was organized by the NHL. At UEFA Euro 2024, AIM Sport provided virtual advertising for all matches, marking one of the largest implementations of the technology in an international tournament. In addition to the tournament itself, virtual advertising was also used in the participating teams' domestic matches, extending region-specific advertising beyond the competition itself.

  Read more →