AI Chatbot You Can Talk To

AI Chatbot You Can Talk To — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Just This Once

    Just This Once

    Just This Once is a 1993 romance novel written in the style of Jacqueline Susann by a Macintosh IIcx computer named "Hal" in collaboration with its programmer, Scott French. French reportedly spent $40,000 and 8 years developing an artificial intelligence program to analyze Susann's works and attempt to create a novel that Susann might have written. A legal dispute between the estate of Jacqueline Susann and the publisher resulted in a settlement to split the profits, and the book was referenced in several legal journal articles about copyright laws. The book had two small print runs totaling 35,000 copies, receiving mixed reviews. == Creation == The novel's creation spanned the fields of artificial intelligence, expert systems, and natural language processing. Scott French first scanned and analyzed portions of two books by Jacqueline Susann, Valley of the Dolls and Once Is Not Enough, to determine constituents of Susann's writing style, which French stated was the most difficult task. This analysis extracted several hundred components including frequency and type of sexual acts and sentence structure. "Once you're there, the writer's style emerges, part of her actual personality comes out, and the computer can be programmed to make a story." French also created several thousand rules to govern tone, plotting, scenes, and characters. The text generated by Hal, the computer, was intended to mimic what Susann might have written, although the output required significant editing. French credits Hal's work with "almost 100% of the plot, 100% of the theme and style." French estimates that he wrote 10% of the prose, the computer Hal wrote about 25% of the prose, and the remaining two-thirds was more of a collaboration between the two. A typical scenario to write a scene would involve Hal asking questions that French would answer (for example, Hal might ask about the "cattiness factor" involved in a meeting between two key female characters, and French would reply with a range of 1 to 10), and the computer would then generate a few sentences to which French would make minor edits. The process would repeat for the next few sentences until the scene was written. == Legal issues == Jacqueline Susann's publisher was skeptical of the legality of Just This Once, although French doubted that an author's thought processes could be copyrighted. Susann's estate reportedly threatened to sue Scott French but the parties settled out of court; the settlement involved splitting profits between the parties but the terms of the settlement were not disclosed. The publication of Just This Once raised questions in the legal profession concerning how copyright law applies to computer-generated works derived from an analysis of other copyrighted works, and whether the generation of such works infringes on copyright. The publications on this topic suggested that the copyright laws of the time were ill-equipped to deal with computer-generated creative works. == Reception == The book's publisher Steven Shragis of Carol Group said of the novel, "I'm not going to say this is a great literary work, but it's every bit as good as anything out in this field, and better than an awful lot." The novel received some positive early reviews. In USA Today, novelist Thomas Gifford compared Just This Once to another novel in the same genre, American Star by Jackie Collins. Gifford concluded: "If you do like this stuff, you'd be much, much better off with the one written by the computer." The Dead Jackie Susann Quarterly declared that Susann "would be proud. Lots of money, sleaze, disease, death, oral sex, tragedy and the good girl gone bad." Other reviews were mixed. Publishers Weekly wrote, "If the books of Jacqueline Susann and Harold Robbins seem formulaic, this debut novel of sin and success in Las Vegas outdoes them all. And that, in a way, is the point.... All novelty rests in the conceit of computer authorship, not in the story itself." Library Journal stated "French invested eight years and $50,000 in a scheme to use artificial intelligence to fulfill his authentic, if dubious, desire to generate a trashy novel a la Jacqueline Susann. Shallow, beautiful-people characters are flatly conceived and randomly accessed in a formulaic plot ... a sexy, boring morality tale. Of possible interest to computer buffs for its use of Expert Systems and the virtual promise of more worthy possibilities; others should read Susann." Kirkus Reviews wrote: "The deal here is that author French is not the author, he's just the midwife, having allegedly programmed his computer to write about our times just the way Susann would... almost perfectly capturing glamorous Jackie's turgid but E-Z reading prose style and ultrareliable mix of sex, glitz, dope 'n' despair.... One wonders, though, if French's tale spinning PC will do as well on the talkshows as Jackie did. The computer weenies have been trying to tell us for years, garbage in-garbage out."

    Read more →
  • Randonautica

    Randonautica

    Randonautica (a portmanteau of "random" + "nautica") is an app launched on February 22, 2020 founded by Auburn Salcedo and Joshua Lengfelder. It randomly generates coordinates that encourages the user to explore their local area and report what is found. According to its creators, the app is "an attractor of strange things," letting one choose specific coordinates based on a specific theme. It gained controversy after a report of two teenagers coincidentally finding a corpse while using the application. == Overview == The app, which creators claim to be inspired by chaos theory and Guy Debord's Theory of the Dérive, offers its users three types of coordinates to choose from: an attractor, a void, or an anomaly. The app has a cult following on YouTube and TikTok and there is a subreddit made by the creators for users of the app. == History == 29-year-old circus performer Joshua Lengfelder discovered a bot called Fatum Project in a fringe science chat group on Telegram in January 2019. According to The New York Times, "He absorbed the project’s theories about how random exploration could break people out of their predetermined realities, and how people could influence random outcomes with their minds." Lengfelder then created a Telegram bot using Fatum Project's code, generating coordinates. He then created the subreddit r/randonauts in March. In October, developer Simon Nishi McCorkindale made the bot's webpage. With the help of Auburn Salcedo, chief executive of a TV agency, both created Randonauts LLC. Salcedo became the chief operating officer while Lengfelder was the CEO. The app, called Randonautica, was launched on February 22, 2020. Later the same year the app and back-end got completely overhauled by a new team of developers and got a more visual and friendlier design and logo. In April 2022 Lengfelder exited Randonauts LLC and Auburn Salcedo became CEO. == Reception == The app has as many as 10.8 million users as of July 2020, gaining popularity amid the COVID-19 pandemic in the United States as restrictions have been lightened. Emma Chamberlain made a YouTube video about the app that helped increase its following. i-D reported that the hashtag #randonautica has gained 176.5 million views on TikTok, although it has not marketed itself yet. === Controversy === With the app's popularity, users started reporting coincidences which many find unsettling. The majority of reports were from TikTok and Reddit, as well as Telegram. The most notable controversy involved a group of people heading to a beach in Duwamish Head, Puget Sound, West Seattle per the app, where they found a bag with two dead bodies, a 27-year-old male and a 36-year-old female, as reported by the Seattle Police homicide detectives. In August 2020, police arrested and charged their landlord, Michael Lee Dudley, in connection with the murders. In March 2021, Dudley was denied bail while other people were under suspicion of aiding Dudley in the dismemberment and disposal of the bodies, but no one else had been charged. This has caused speculation that the app has an intended, puzzle-like theme. However, Lengfelder stated that it is "a shocking coincidence." Salcedo called the videos fake, and that "It’s so hard to manage, because people are really taking creative liberties after seeing how much traction the app is getting in that fear factor." In 2022, Michael Dudley was convicted of second degree murder for killing both victims, who were identified as Jessica Lewis and Austin Wenner. He was sentenced to 46 years in prison the following year. In their questions page, Randonautica's creators have said that if the app generates coordinates inside a private property, it is a violation of their terms and conditions to trespass. In addition, Randonautica has also received allegations that the app is used for human trafficking, which its creators have denied, saying that data collected by the app are anonymous. It also ensured that the app is not designed to violate religious customs, saying that "the app is simply a tool. Just as a knife can be used either to prepare dinner or to cut somebody."

    Read more →
  • Randonautica

    Randonautica

    Randonautica (a portmanteau of "random" + "nautica") is an app launched on February 22, 2020 founded by Auburn Salcedo and Joshua Lengfelder. It randomly generates coordinates that encourages the user to explore their local area and report what is found. According to its creators, the app is "an attractor of strange things," letting one choose specific coordinates based on a specific theme. It gained controversy after a report of two teenagers coincidentally finding a corpse while using the application. == Overview == The app, which creators claim to be inspired by chaos theory and Guy Debord's Theory of the Dérive, offers its users three types of coordinates to choose from: an attractor, a void, or an anomaly. The app has a cult following on YouTube and TikTok and there is a subreddit made by the creators for users of the app. == History == 29-year-old circus performer Joshua Lengfelder discovered a bot called Fatum Project in a fringe science chat group on Telegram in January 2019. According to The New York Times, "He absorbed the project’s theories about how random exploration could break people out of their predetermined realities, and how people could influence random outcomes with their minds." Lengfelder then created a Telegram bot using Fatum Project's code, generating coordinates. He then created the subreddit r/randonauts in March. In October, developer Simon Nishi McCorkindale made the bot's webpage. With the help of Auburn Salcedo, chief executive of a TV agency, both created Randonauts LLC. Salcedo became the chief operating officer while Lengfelder was the CEO. The app, called Randonautica, was launched on February 22, 2020. Later the same year the app and back-end got completely overhauled by a new team of developers and got a more visual and friendlier design and logo. In April 2022 Lengfelder exited Randonauts LLC and Auburn Salcedo became CEO. == Reception == The app has as many as 10.8 million users as of July 2020, gaining popularity amid the COVID-19 pandemic in the United States as restrictions have been lightened. Emma Chamberlain made a YouTube video about the app that helped increase its following. i-D reported that the hashtag #randonautica has gained 176.5 million views on TikTok, although it has not marketed itself yet. === Controversy === With the app's popularity, users started reporting coincidences which many find unsettling. The majority of reports were from TikTok and Reddit, as well as Telegram. The most notable controversy involved a group of people heading to a beach in Duwamish Head, Puget Sound, West Seattle per the app, where they found a bag with two dead bodies, a 27-year-old male and a 36-year-old female, as reported by the Seattle Police homicide detectives. In August 2020, police arrested and charged their landlord, Michael Lee Dudley, in connection with the murders. In March 2021, Dudley was denied bail while other people were under suspicion of aiding Dudley in the dismemberment and disposal of the bodies, but no one else had been charged. This has caused speculation that the app has an intended, puzzle-like theme. However, Lengfelder stated that it is "a shocking coincidence." Salcedo called the videos fake, and that "It’s so hard to manage, because people are really taking creative liberties after seeing how much traction the app is getting in that fear factor." In 2022, Michael Dudley was convicted of second degree murder for killing both victims, who were identified as Jessica Lewis and Austin Wenner. He was sentenced to 46 years in prison the following year. In their questions page, Randonautica's creators have said that if the app generates coordinates inside a private property, it is a violation of their terms and conditions to trespass. In addition, Randonautica has also received allegations that the app is used for human trafficking, which its creators have denied, saying that data collected by the app are anonymous. It also ensured that the app is not designed to violate religious customs, saying that "the app is simply a tool. Just as a knife can be used either to prepare dinner or to cut somebody."

    Read more →
  • Digital supply chain security

    Digital supply chain security

    Digital supply chain security refers to efforts to enhance cyber security within the supply chain. It is a subset of supply chain security and is focused on the management of cyber security requirements for information technology systems, software and networks, which are driven by threats such as cyber-terrorism, malware, data theft and the advanced persistent threat (APT). Typical supply chain cyber security activities for minimizing risks include buying only from trusted vendors, disconnecting critical machines from outside networks, and educating users on the threats and protective measures they can take. The acting deputy undersecretary for the National Protection and Programs Directorate for the United States Department of Homeland Security, Greg Schaffer, stated at a hearing that he is aware that there are instances where malware has been found on imported electronic and computer devices sold within the United States. == Examples of supply chain cyber security threats == Network or computer hardware that is delivered with malware installed on it already. Malware that is inserted into software or hardware (by various means) Vulnerabilities in software applications and networks within the supply chain that are discovered by malicious hackers Counterfeit computer hardware == Related U.S. government efforts == Comprehensive National Cyber Initiative Defense Procurement Regulations: Noted in section 806 of the National Defense Authorization Act International Strategy for Cyberspace: White House lays out for the first time the U.S.’s vision for a secure and open Internet. The strategy outlines three main themes: diplomacy, development and defense. Diplomacy: The strategy sets out to “promote an open, interoperable, secure and reliable information and communication infrastructure” by establishing norms of acceptable state behavior built through consensus among nations. Development: Through this strategy the government seeks to “facilitate cybersecurity capacity-building abroad, bilaterally and through multilateral organizations.” The objective is to protect the global IT infrastructure and to build closer international partnerships to sustain open and secure networks. Defense: The strategy calls out that the government “will ensure that the risks associated with attacking or exploiting our networks vastly outweigh the potential benefits” and calls for all nations to investigate, apprehend and prosecute criminals and non-state actors who intrude and disrupt network systems. == Related government efforts around the world == Common Criteria offers with Evaluation Assurance Level(EAL) 4 an opportunity to evaluate all relevant aspects of the digital supply chain security like the product, the development environment, IT systems security, the processes in human resource, physical security and with the module ALC_FLR.3 (Systematic Flaw Remediation) also security update processes and methods even by physical site visits. EAL 4 is mutually recognized in countries that signed the SOGIS-MRA and up to ELA 2 in countries the signed the CCRA but including ALC_FRL.3. Russia: Russia has had non-disclosed functionality certification requirements for several years and has recently initiated the National Software Platform effort based on open-source software. This reflects the apparent desire for national autonomy, reducing dependence on foreign suppliers. India: Recognition of supply chain risk in its draft National Cybersecurity Strategy. Rather than targeting specific products for exclusion, it is considering Indigenous Innovation policies, giving preferences to domestic ITC suppliers in order to create a robust, globally competitive national presence in the sector. China: Deriving from goals in the 11th Five Year Plan (2006–2010), China introduced and pursued a mix of security-focused and aggressive Indigenous Innovation policies. China is requiring an indigenous innovation product catalog be used for its government procurement and implementing a Multi-level Protection Scheme (MLPS) which requires (among other things) product developers and manufacturers to be Chinese citizens or legal persons, and product core technology and key components must have independent Chinese or indigenous intellectual property rights. == Private sector efforts == SLSA (Supply-chain Levels for Software Artifacts) is an end-to-end framework for ensuring the integrity of software artifacts throughout the software supply chain. The requirements are inspired by Google’s internal "Binary Authorization for Borg" that has been in use for the past 8+ years and that is mandatory for all of Google's production workloads. The goal of SLSA is to improve the state of the industry, particularly open source, to defend against the most pressing integrity threats. With SLSA, consumers can make informed choices about the security posture of the software they consume. == Other references == Financial Sector Information Sharing and Analysis Center International Strategy for Cyberspace (from the White House) NSTIC SafeCode Whitepaper Archived 2013-10-21 at the Wayback Machine Trusted Technology Forum and the Open Trusted Technology Provider Standard (O-TTPS) Archived 2012-01-03 at the Wayback Machine Cyber Supply Chain Security Solution Malware Implants in Firmware Supply Chain in the Software Era INFORMATION AND COMMUNICATIONS TECHNOLOGY SUPPLY CHAIN RISK MANAGEMENT TASK FORCE: INTERIM REPORT

    Read more →
  • Synonym (database)

    Synonym (database)

    In databases, a synonym is an alias or alternate name for a table, view, sequence, or other schema object. They are used mainly to make it intuitive for users to access database objects owned by other users. They also hide the underlying object's identity and make it harder for a malicious program or user to target the underlying object (security through obscurity). Because a synonym is just an alternate name for an object, it requires no storage other than its definition. When an application uses a synonym, the DBMS forwards the request to the synonym's underlying base object. By coding your programs to use synonyms instead of database object names, you insulate yourself from any changes in the name, ownership, or object locations, at the cost of adding another layer that also needs to be maintained. Users can also have different needs, for example some may wish to use a shorter name to refer to database objects they often query, which can be done with aliases without having to rename the underlying object and alter the code referring to it. Synonyms are very powerful from the point of view of allowing users access to objects that do not lie within their schema. All synonyms have to be created explicitly with the CREATE SYNONYM command and the underlying objects can be located in the same database or in other databases that are connected by database links There are two major uses of synonyms: Object invisibility: Synonyms can be created to keep the original object hidden from the user. Location invisibility: Synonyms can be created as aliases for tables and other objects that are not part of the local database. When a table or a procedure is created, it is created in a particular schema, and other users can access it only by using that schema's name as a prefix to the object's name. The way around for this is for the schema owner creates a synonym with the same name as the table name. == Public synonyms == Public synonyms are owned by special schema in the Oracle Database called PUBLIC. As mentioned earlier, public synonyms can be referenced by all users in the database. Public synonyms are usually created by the application owner for the tables and other objects such as procedures and packages so the users of the application can see the objects The following code shows how to create a public synonym for the employee table: Now any user can see the table by just typing the original table name. If you wish, you could provide a different table name for that table in the CREATE SYNONYM statement. Remember that the DBA must create public synonyms. Just because you can see a table through public (or private) synonym doesn’t mean that you can also perform SELECT, INSERT, UPDATE or DELETE operations on the table. To be able to perform those operations, a user needs specific privileges for the underlying object, either directly or through roles from the application owner. == Private synonyms == A private synonym is a synonym within a database schema that a developer typically uses to mask the true name of a table, view stored procedure, or other database object in an application schema. Private synonyms, unlike public synonyms, can be referenced only by the schema that owns the table or object. You may want to create private synonyms when you want to refer to the same table by different contexts. Private synonym overrides public synonym definitions. You create private synonyms the same way you create public synonyms, but you omit the PUBLIC keyword in the CREATE statement. The following example shows how to create a private synonym called addresses for the locations table. Note that once you create the private synonym, you can refer to the synonym exactly as you would the original table name. == Drop a synonym == Synonyms, both private and public, are dropped in the same manner by using the DROP SYNONYM command, but there is one important difference. If you are dropping a public synonym; you need to add the keyword PUBLIC after the keyword DROP. The ALL_SYNONYMS (or DBA_SYNONYMS) view provides information on all synonyms in your database.

    Read more →
  • Digistar

    Digistar

    Digistar is the first computer graphics-based planetarium projection and content system. It was designed by Evans & Sutherland and released in 1983. The technology originally focused on accurate and high quality display of stars, including for the first time showing stars from points of view other than Earth's surface, travelling through the stars, and accurately showing celestial bodies from different times in the past and future. Beginning with the Digistar 3 the system now projects full-dome video. == Projector == Unlike modern full-dome systems, which use LCD, DLP, SXRD, or laser projection technology, the Digistar projection system was designed for projecting bright pinpoints of light representing stars. This was accomplished using a calligraphic display, a form of vector graphics, rather than raster graphics. The heart of the Digistar projector is a large cathode-ray tube (CRT). A phosphor plate is mounted atop the tube, and light is then dispersed by a large lens with a 160 degree field of view to cover the planetarium dome. The original lens bore the inscription: "August 1979 mfg. by Lincoln Optical Corp., L.A., CA for Evans and Sutherland Computer Corp., SLC, UT, Digital planetarium CRT projection lens, 43mm, f2.8, 160 degree field of view". The coordinates of the stars and wire-frame models to be displayed by the projector were stored in computer RAM in a display list. The display would read each set of coordinates in turn and drive the CRT's electron beam directly to those coordinates. If the electron beam was enabled while being moved a line would be painted on the phosphor plate. Otherwise, the electron beam would be enabled once at its destination and a star would be painted. Once all coordinates in the display list had been processed, the display would repeat from the top of the display list. Thus, the shorter the display list the more frequently the electron beam would refresh the charge on a given point on the phosphor plate, making the projection of the points brighter. In this way, the stars projected by Digistar were substantially brighter than could be achieved using a raster display, which has to touch every point on the phosphor plate before repeating. Likewise, the calligraphic technology allowed Digistar to have a darker black-level than full-dome projectors, since the portions of the phosphor plate representing dark sky were never hit by the electron beam. As it is only one tube, with no pixelated color filter screen, the Digistar projector is monochromatic. The Digistar projects a bright, phosphorescent green, though many (including both visitors and planetarians) report they cannot distinguish between this green and white. Additionally, unlike a raster display, the calligraphic display is not discretized into pixels, so the displayed stars were a more realistic single spot of light, without the blocky or ropy artifacts that are hard to avoid with raster graphics. Due to the use of vector graphics, as opposed to raster imaging, the Digistar does not have the resolution issues that many full-dome systems have. Thanks to this, and the brightness of the CRT, only one projector is needed to project on the entire dome, whereas most full-dome systems require up to six raster projectors, depending on dome size. The projector in the original Digistar was housed in a square pyramid-shaped sheathing. When powered on, the four sides at the tip of the pyramid would recede into the housing, exposing the lens and appearing as a cut-off pyramid. As Digistar II was being developed, many planetaria were sold Digistar LEA projectors. The LEA, called Digistar 1.5 by many users, was effectively a prototype of the D2 projector, compatible with Digistar and upgradable to Digistar II. There are no significant differences in performance between the LEA and the true D2. == History == Digistar was the brainchild of Stephen McAllister and Brent Watson, both of whom were long-time amateur astronomers and computer graphics engineers. In 1977, E&S had been consulting with Johnson Space Center regarding training simulators for astronauts. McAllister had been writing proof-of-concept software for this consultation and in summer 1977 entered the data for 400 bright stars and wrote the software to display them. Steve and Brent both originally saw the system's purpose as celestial navigation training. Brent, who had until recently worked at Hansen planetarium, asked his planetarium coworkers what they thought of a potential digital planetarium system, and then Steve and Brent both targeted the system toward planetaria. The primary goal of the planetarium system was to use computer graphics to overcome the limitation of traditional star ball technology that only allowed display of star fields from the point of view of Earth's surface. By using computer graphics the stars could be displayed from viewpoints in space, including simulating the appearance of space flight. Likewise, planets and moons within the Solar System could be displayed accurately for any time in history, from any point of view. The system used the location of real stars from the Yale Bright Star Catalogue, as well as random stars. A laboratory prototype of Digistar was used to generate the star fields and tactical displays in the 1982 science fiction film Star Trek II: The Wrath of Khan. Filming was done directly from the Digistar display in the lab. ILM projected the effort would take two weeks, but in fact it took from late November 1981 until mid-February 1982. The last shot recorded was what became the first entirely computer generated feature film sequence. It was the opening scene of the film, a rotating forward translation through a star field that lasted 3.5 minutes. It was recorded in one take, at a rate of one frame every 3.5 seconds, taking four hours for the shoot. The Digistar team members are credited in the film. After prototyping in labs at Evans and Sutherland the team repeatedly used Salt Lake City's Hansen planetarium to beta test the system at the planetarium at night. The Digistar team performed one week of shows at the planetarium as a fund raiser to benefit the planetarium. The company also later gave the planetarium an improved prototype Digistar to replace "Jake", the planetarium's aging Spitz planetarium projector. The first customer installation was to the newly constructed Universe Planetarium at the Science Museum of Virginia in 1983, the largest planetarium dome in the world at the time, for $595,000. By September 1986 there were four installed Digistars. Even at this point the long-term success of the product was very much in doubt, but as of 2019 Digistar has an installed base of over 550 planetaria. === Versions === Digistar (1983) Digistar II (1995) Digistar 3 (2002) Digistar 4 (2010?) Digistar 5 (2012) Digistar 6 (2016) Digistar 7 (2021) == Hardware == Digistar was driven by a VAX-11/780 minicomputer, with custom graphics hardware related to the E&S Picture System 2. Later versions of Digistar 1 used a DEC MicroVAX 2, driving a custom version of a PS/300. The original Digistar and Digistar 2 had a physical control panel that was used for running the star shows. This control panel was approximately 3' x 4' and contained a keyboard, a 6 DOF joystick, and a large array of back-lit buttons. One button that was used for moving the viewpoint forward in space was labeled "Boldly Go". Later iterations of Digistar replaced the physical control panel with a common graphical user interface. Digistar 3 was the first Digistar system to offer full-dome video in 2002, using six projectors. Digistar 4 was able to cover the dome using only two projectors. == System limitations == Though technologically advanced in its day, and the closest system to true full-dome video at the time of its release, the original Digistar and Digistar 2 are limited to only projecting dots and lines—meaning only wireframe models can be projected. To compensate for this, the projector is capable of defocusing specific models, blurring lines and dots together. An example of this is in the Digistar 2's built-in Milky Way model. The model is a circle of parallel lines that, when defocused, appear as the continuous band of the Milky Way across the sky. On more complex models, especially three-dimensional ones, brightness and details may be lost in this process, so it is not useful in all situations. The Digistar and Digistar 2 also suffer focus limitations. Because they use a single lens to cover the entire dome, it is difficult to gain perfect focus across the dome. Coupled with this, stars greater than a certain brightness are "multihit" points, meaning the projector draws two dots at the given position to accommodate the brightness of the star. Errors in the projector can lead the second dot to be slightly out-of-place with the first one. These two issues together, along with other issues that can occur within the projector's focus system, give the stars a blobby look. Some p

    Read more →
  • Micro stuttering

    Micro stuttering

    Micro stuttering is a visual artifact in real-time computer graphics in which the time intervals between consecutively displayed frames are uneven, even though the average frame rate reported by benchmarking software appears adequate. Tools such as 3DMark typically compute frame rates over intervals of one second or more, which can conceal momentary drops in the instantaneous frame rate that the viewer perceives as hitching or jerking of on-screen motion. At low frame rates the effect is visible as a stutter in moving images, degrading the experience in interactive applications such as video games. In severe cases a lower but more consistent frame rate can appear smoother than a higher but more erratic one. The term gained prominence in the late 2000s in discussions of multi-GPU rendering (see History), but micro stuttering also affects single-GPU systems. Common causes on modern hardware include real-time shader compilation, asset streaming from storage, VRAM exhaustion, and driver bugs. == Causes == === Shader compilation === A common cause of micro stuttering on modern PCs is real-time shader compilation. Shaders are small programs that instruct the GPU on how to render visual effects such as lighting, shadows, and reflections. On consoles, developers can pre-compile all shaders for the known, fixed hardware. On PCs, the variety of GPU architectures means shaders must often be compiled at run time, either when the game launches or during gameplay itself. When the rendering engine encounters a shader that has not yet been compiled, the CPU must finish the compilation before the GPU can draw the affected object. This causes a spike in frame time that the player perceives as a hitch. The problem has been particularly associated with games built on Unreal Engine 4 running under DirectX 12, because DX12 shifts more shader management responsibility to the application. Several techniques exist to reduce shader compilation stutter. Pipeline State Object (PSO) pre-caching records the shader permutations used at runtime so that they can be compiled in advance on subsequent launches. Asynchronous shader compilation moves the work to background CPU threads to avoid blocking the main rendering thread. Platform-level services such as Steam's shader pre-caching distribute previously compiled shaders to users with matching GPU hardware. The Steam Deck, which contains a single fixed GPU, benefits from pre-compiled shader caches because all units share the same hardware configuration. === Other causes === Micro stuttering on single-GPU systems can have several additional causes. CPU bottlenecks or scheduling interruptions from background tasks can prevent the processor from preparing frames at regular intervals. Asset streaming during gameplay (loading textures, geometry, or audio from storage) can produce hitches sometimes called traversal stutter; the use of solid-state drives and technologies such as DirectStorage has reduced but not eliminated this. VRAM exhaustion forces data to be swapped between video memory and system memory over the PCI Express bus, which is slower. Graphics driver bugs can also introduce stutter; Nvidia released hotfix driver 551.46 in February 2024 to correct intermittent micro stuttering when V-Sync was enabled. == Measurement == Micro stuttering drew attention to the limitations of average frame rate as a performance metric. In 2013, Scott Wasson at The Tech Report published a series of articles advocating frame time analysis, in which the delivery time of every individual frame is recorded and plotted rather than collapsed into a single frames-per-second figure. This approach was adopted by other hardware review publications in the following years. GPU reviews now routinely report 1% low and 0.1% low frame rates alongside the average. The 1% low is the average frame rate of the slowest 1% of frames in a sample; it serves as an indicator of worst-case smoothness. A large gap between the average and the 1% low suggests poor frame pacing. Tools for capturing per-frame timing data include FRAPS, PresentMon, OCAT, CapFrameX, and MSI Afterburner with RivaTuner Statistics Server. == Mitigation == === Frame pacing === Frame pacing is a software technique that regulates the timing of frame delivery to produce even intervals between displayed frames. Game engines, GPU drivers, and platform libraries all implement frame pacing strategies to varying degrees. On mobile platforms, Google provides the Android Frame Pacing library (Swappy) as part of the Android Game Development Kit. In December 2025, the Khronos Group published the VK_EXT_present_timing Vulkan extension, giving developers explicit control over presentation timing in a cross-platform graphics API for the first time. === Variable refresh rate === Variable refresh rate (VRR) display technologies allow a monitor's refresh rate to change to match the GPU's frame output. Implementations include Nvidia G-Sync (2013), AMD FreeSync (2015), and the VESA Adaptive-Sync standard built into DisplayPort 1.2a and later. VRR eliminates the screen tearing that results from a mismatch between frame rate and refresh rate, and avoids the frame-holding behaviour of V-Sync that can itself cause stutter. It is effective at smoothing moderate frame rate fluctuations but cannot compensate for large sudden spikes in frame time such as those caused by shader compilation or heavy asset streaming. VRR support has become standard in gaming monitors, televisions (via HDMI 2.1), and the Xbox Series X/S and PlayStation 5 consoles. === Frame generation === Beginning with DLSS 3 on the GeForce RTX 40 series in 2022, Nvidia introduced AI-based frame generation, which uses dedicated optical flow hardware and a neural network to create new frames between traditionally rendered ones. AMD followed with FSR 3 in 2023, using an algorithmic approach, and the AI-based FSR 4 for the Radeon RX 9000 series in 2025. DLSS 4, released in January 2025 for the GeForce RTX 50 series, can generate up to three frames per rendered frame using a technique called Multi Frame Generation. Frame generation increases the displayed frame rate but introduces its own frame pacing concerns. If the underlying rendered frames are unevenly timed, the interpolated frames can make the unevenness more apparent rather than less. DLSS 4 addresses this with hardware-level flip metering on the GPU's display engine, which controls the timing of frame presentation more precisely than the CPU-based pacing used in DLSS 3. Both vendors pair frame generation with latency-reduction features (Nvidia Reflex and AMD Anti-Lag+) to offset the additional input latency that results from inserting synthetic frames into the pipeline. === Frame rate limiters === Capping the frame rate below the display's maximum refresh rate, using tools such as RivaTuner Statistics Server, in-game limiters, or driver-level settings, is a common way to improve frame pacing. Preventing the GPU from running ahead of the display reduces variability in frame delivery times and can produce a smoother result than an uncapped but more irregular frame rate. == History == === Multi-GPU configurations === Micro stuttering was first widely documented in the late 2000s as a side effect of multi-GPU configurations using Alternate Frame Rendering (AFR), in which consecutive frames are assigned to alternating GPUs. Because each GPU may take a different amount of time to complete its assigned frame — due to varying scene complexity, driver scheduling, or inter-GPU communication overhead — the resulting frame delivery is irregular even when the average frame rate is high. Both Nvidia SLI and AMD CrossFireX were affected, with dual-GPU setups exhibiting the worst frame pacing irregularities. In 2012 benchmarks using Battlefield 3, dual Radeon HD 7970 cards in CrossFire showed 85% variation in frame delivery times compared with 7% for a single card, while dual GeForce GTX 680 cards in SLI showed only 7% variation compared with 5% for a single card. Multi-GPU micro stuttering became a significant factor in the eventual decline and discontinuation of consumer multi-GPU gaming. Nvidia restricted SLI to a handful of enthusiast-class cards from the GeForce 10 series onward, then replaced it with NVLink on the GeForce RTX 20 series, which saw limited gaming adoption. AMD ceased active CrossFire development around 2017. By the mid-2020s, neither vendor's current consumer GPUs support multi-GPU rendering for games. Other factors that contributed to the decline include DirectX 12 placing multi-GPU support in the hands of game developers rather than driver authors, the incompatibility of temporal anti-aliasing and other temporal rendering techniques with AFR, and the increasing size, power draw, and cost of individual GPUs. The third-party utility RadeonPro could reduce CrossFire micro stuttering through dynamic V-Sync and frame pacing adjustments, and AMD later introduced a driver-level frame paci

    Read more →
  • Trebel (music app)

    Trebel (music app)

    Trebel is an on-demand music download and discovery platform developed by M&M Media Inc. The company's business model aims to combat digital music piracy by giving users access to on-demand music at no cost while delivering fair compensation to artists and music rights holders. Trebel has a patent that allows it to market itself as the only international music service in which users can legally download music and listen to it offline for free. As of March 2023, Trebel has a catalog of 75 million songs from record labels such as Universal Music Group, Sony Music Entertainment, Warner Music Group and hundreds of independent labels. Trebel is based in Stamford, Connecticut. with additional locations in Mexico City, Jakarta, Bogota, Los Angeles and Miami. The app is available in the Apple App Store, Google Play Store, and Huawei AppGallery. == History == Trebel was founded in 2014 by Gary Mekikian, who was previously the co-founder of answerFriend, Inc., which commercialized web based question-answering technologies and merged with Electric Knowledge, forming InQuira. This company was eventually acquired by Oracle Corporation in 2011. His co-founders at Trebel include Stanford classmates Corey Jones and Luis Soto Durazo, as well as his daughters Grace and Juliette. Mekikian envisioned Trebel as an alternative to music piracy after a high school classmate of his daughters was targeted by cyberattackers while illegally downloading music online. Trebel was initially released in 2015 under the name Project Carmen to students at Ohio State, Santa Monica College, Cal State Fullerton, UCLA and Long Beach State. In its original incarnation, the service planned to target students at 3,000 universities and 30,000 high schools in the United States. A beta version of the app was introduced in 2016 with content from Universal Music Group and Warner Music Group. Trebel launched commercially in the United States and Mexico in 2018. In 2018, Mexican mass-media corporation Televisa also became a minority investor in Trebel. In May 2020, during the early months of the COVID-19 pandemic, Trebel was a digital broadcast partner for Se Agradece, a concert produced in Mexico by Televisa to honor frontline COVID workers that featured artists such as Rosalia, J Balvin, Maluma and Ricky Martin. In June 2021, Trebel reached 3 million monthly active users. In October 2021, Trebel signed a music licensing agreement with Merlin Network, the licensing agency for the independent music sector that controls an estimated 12% of the global digital recorded music market. In January 2022, Trebel announced a strategic alliance with MNC Corporation, an Indonesian media conglomerate, which also became a minority backer of the company. In March 2022, Trebel reported 5.2 million monthly active users as a result of growth in Latin America. In the same month,, Latin music star Maluma became a backer of Trebel and an advisor to Gary Mekikian, helping expand the service throughout Latin America. On April 18, 2022, Trebel launched in Indonesia during the finale of the music competition show X Factor Indonesia. Trebel also signed a deal that month with Soccer Media Solutions, a sports and entertainment marketing agency in Mexico, to sell Trebel’s premium advertising inventory through Soccer Media. In May 2022, Guillermo Ochoa, goalkeeper for the Mexican national soccer team, invested in Trebel and became an ambassador for the company. On October 2, 2022, Trebel collaborated with Musica Studios, one of the largest music companies in Indonesia, on the production of a music festival in Jakarta titled Trebel Music Fest. The event featured performances by top Indonesian music artists such as Noah, Nidji, and d'Masiv. In October 2022, Trebel launched in Colombia. The service reached 1.2 million monthly active users in Colombia six months after launching. In December 2022, Trebel collaborated with KFC in Indonesia on the release of a KFC digital music program using a product called Trebel Max. As part of the program, KFC customers who bought the Crazy Superstar Combo package at KFC received a subscription to Trebel Max for 30 days. Trebel announced the launch of Trebel AI in May 2023. Trebel AI uses ChatGPT-powered technology to generate playlists based on natural language queries from users. In Indonesia, the Trebel AI feature was announced during a broadcast of the show Indonesian Idol XII that took place on May 8, 2023. In July 2023, Trebel reached more than 13 million monthly active users. In November 2023, Trebel became a featured app on the Discord app directory. Discord users that add the Trebel bot to their servers have access to Trebel's on-demand music library and have the exclusive privilege of being DJ's during server sessions with up to 150 concurrent listeners. == Platform == === Features === Trebel has a patent that allows it to market itself as the only international music service in which users can legally download music and listen to it offline for free. As of March 2023, Trebel has a catalog of 75 million songs from record labels such as Universal Music Group, Sony Music Entertainment, Warner Music Group and hundreds of independent labels. Trebel offers unlimited music downloads that are playable in the app by registered users only. Offline listening is free to all users and not blocked by a paywall. Users can search for music based on song, artist, album, browsing friends' recent activity, and through other users' playlists. The app also offers free cloud storage for downloaded songs. Trebel also contains a feature called SongID, which identifies music being played nearby using a short sample, then offers it for download on the service. Podcasts are available for free listening on the service as well. === Business model === Trebel uses a business model that generates revenue from the sale of digital advertising as well as user interactions with branded experiences, and consumption of virtual goods within the app (akin to mobile games). The app also features a brand takeover feature called Trebel Max, which offers unlimited access in exchange for users engaging with experiences offered by specific brands. Trebel’s brand partners include Uber, KFC, Walmart, Coca-Cola, Amazon and P&G. === Content === In September 2022, Trebel secured an exclusive release of the song “Suara Hatiku” by Indonesian actress Amanda Monopo. As of March 2023, Trebel offers 75 million songs through licensing agreements with Universal Music Group, Sony Music Entertainment, Warner Music Group and global indie rights agency Merlin. == Awards == In 2023, Trebel won three Google Play awards including "Best App of 2023", "Best Everyday Essentials" and "Users' Choice".

    Read more →
  • Knowledge as a service

    Knowledge as a service

    Knowledge as a service (KaaS) is a computing service that delivers information to users, backed by a knowledge model, which might be drawn from a number of possible models based on decision trees, association rules, or neural networks. A knowledge as a service provider responds to knowledge requests from users through a centralised knowledge server, and provides an interface between users and data owners. KaaS is one of several cloud computing-dependent business models in which computer resources are sold on an on-demand and pay-as-you-use basis. == Overview == At the International Semantic Web Conference 2019, it was described how knowledge can be made live and evolve on the web allowing users to learn directly from elaborated knowledge, now appearing in the form of knowledge graphs. KaaS appear when knowledge graphs are accessed via services This is opposed to DaaS which might "compute large volumes of data; integrate and analyzes that data; and publish it in real-time, using Web service APIs" (from Data as a Service) where the KaaS is able to exploit context - both the context of the user in relation to their information requests of the KaaS (where and when they make the request) and also the context of the information in relation to some objective or purpose of the users either understood by the KaaS automatically or indicated to it by the user. == Differentiating knowledge from data == Conceptual models that make such a differentiation such as the so-called DIKW pyramid have existed for perhaps more than 40 years (see a 1974 journal article about this) however definitions are not stable and universally accepted (see the discussion about the conceptualizations of DIKW within the DIKW Wikipedia article that question value of wisdom). The knowledge component of DIKW is generally agreed to be an elusive concept which is difficult to define, however Rowley 2007, in a well known student textbook differentiated knowledge from data by stating that knowledge is "defined with reference to information" and that it contains more than just facts but also "beliefs and expectations". In relation to knowledge graphs, knowledge may be additional content they provide over and above pure data which is the definition of the categories, properties and relations between the concepts, data and entities that substantiate one, many or all domains of discourse (see the definition of Ontology). The ability to represent "beliefs and expectations", or other forms of not so straightforwardly explicit knowledge is an on-going area of improvement in information sciences (see Tacit knowledge) and, with relation to KaaS, the establishment of recent informatics mechanics to do so it critical to the legitimacy of KaaS as it is differentiated from just value-added DaaS. Knowledge graphs' ability to represent context via the definition of the categories, properties and relations between the concepts, data and entities that substantiate one, many or all domains of discourse that they provide (see the definition of Ontology) has led to the idea that supplying access to KNs might be a required competency of a KaaS. == Delivery of knowledge == Much service-delivered content is dependent on a session to provide much of the context that the user (client) needs to understand answers to questions. For example, using current HTTP internet protocols, a GET request to retrieve information identified by a URI, such as a web page, a client (a human or a machine) may have access information supplied automatically to enable that client to bypass paywalls or other content access controls. Such context, in this case about the client's information access allowances, can alter the information provided. In a logical extension to this internet protocols example, a server would receive from the client, either manually or automatically, a full context which would be information about the situation the client is in and this would allow the server to best interpret the client's request. Current internet protocols allow for formats, languages and related preferences to be expressed by clients but make no mention of what a client already knows and what they may understand. The recent Content Negotiation by Profile proposes additions to both the HTTP internet protocols and related services that allow clients to also request information - a response from the server - that accords with an identified information model. This then allows clients to indicate not just formats and languages that they understand (technically that they prefer) but also domains of discourse that that do, which is a step towards comprehensive client context provision.

    Read more →
  • Device-independent pixel

    Device-independent pixel

    A device-independent pixel (also: density-independent pixel, dip, dp) is a unit of length. A typical use is to allow mobile device software to scale the display of information and user interaction to different screen sizes. The abstraction allows an application to work in pixels as a measurement, while the underlying graphics system converts the abstract pixel measurements of the application into real pixel measurements appropriate to the particular device. For example, on the Android operating system a device-independent pixel is equivalent to one physical pixel on a 160 dpi screen, while the Windows Presentation Foundation specifies one device-independent pixel as equivalent to 1/96th of an inch. As dp is a physical unit it has an absolute value which can be measured in traditional units, e.g. for Android devices 1 dp equals 1/160 of inch or 0.15875 mm. While traditional pixels only refer to the display of information, device-independent pixels may also be used to measure user input such as input on a touch screen device.

    Read more →
  • Tessellation (computer graphics)

    Tessellation (computer graphics)

    In computer graphics, tessellation is the dividing of datasets of polygons (sometimes called vertex sets) presenting objects in a scene into suitable structures for rendering. Especially for real-time rendering, data is tessellated into triangles, for example in OpenGL 4.0 and Direct3D 11. == In graphics rendering == A key advantage of tessellation for realtime graphics is that it allows detail to be dynamically added and subtracted from a 3D polygon mesh and its silhouette edges based on control parameters (often camera distance). In previously leading realtime techniques such as parallax mapping and bump mapping, surface details could be simulated at the pixel level, but silhouette edge detail was fundamentally limited by the quality of the original dataset. In Direct3D 11 pipeline (a part of DirectX 11), the graphics primitive is the patch. The tessellator generates a triangle-based tessellation of the patch according to tessellation parameters such as the TessFactor, which controls the degree of fineness of the mesh. The tessellation, along with shaders such as a Phong shader, allows for producing smoother surfaces than would be generated by the original mesh. By offloading the tessellation process onto the GPU hardware, smoothing can be performed in real time. Tessellation can also be used for implementing subdivision surfaces, level of detail scaling and fine displacement mapping. OpenGL 4.0 uses a similar pipeline, where tessellation into triangles is controlled by the Tessellation Control Shader and a set of four tessellation parameters. == In computer-aided design == In computer-aided design the constructed design is represented by a boundary representation topological model, where analytical 3D surfaces and curves, limited to faces, edges, and vertices, constitute a continuous boundary of a 3D body. Arbitrary 3D bodies are often too complicated to analyze directly. So they are approximated (tessellated) with a mesh of small, easy-to-analyze pieces of 3D volume—usually either irregular tetrahedra, or irregular hexahedra. The mesh is used for finite element analysis. The mesh of a surface is usually generated per individual faces and edges (approximated to polylines) so that original limit vertices are included into mesh. To ensure that approximation of the original surface suits the needs of further processing, three basic parameters are usually defined for the surface mesh generator: The maximum allowed distance between the planar approximation polygon and the surface (known as "sag"). This parameter ensures that mesh is similar enough to the original analytical surface (or the polyline is similar to the original curve). The maximum allowed size of the approximation polygon (for triangulations it can be maximum allowed length of triangle sides). This parameter ensures enough detail for further analysis. The maximum allowed angle between two adjacent approximation polygons (on the same face). This parameter ensures that even very small humps or hollows that can have significant effect to analysis will not disappear in mesh. An algorithm generating a mesh is typically controlled by the above three and other parameters. Some types of computer analysis of a constructed design require an adaptive mesh refinement, which is a mesh made finer (using stronger parameters) in regions where the analysis needs more detail.

    Read more →
  • JustWatch

    JustWatch

    JustWatch is a website that provides information on the availability of films and TV shows on various streaming platforms such as Netflix, HBO Max, Disney+, Hulu, Peacock, Fandango at Home, Apple TV, and Amazon Prime Video, among others. It is also available as a mobile application and smart TV application. JustWatch provides a search engine that allows users to discover which digital platforms host a particular movie or TV series. As of November 2023, JustWatch is available to users in 139 countries. == Features == JustWatch functions as a search engine by aggregating information about the online availability of films and TV series from video-on-demand streaming services. It aggregates information from more than 100 video content libraries, as well providing information about video resolution quality, pricing, and purchase or rental options. The website includes various filters for searching, including genre, price, release date, rating, and popularity. Users are also able to create lists of shows and movies and to share these lists with other users. == History == JustWatch GmbH is an international database company that is privately held and headquartered in Berlin, Germany. The company specializes in the online availability of movies and TV series. In addition to its user-facing website, the company also has an advertising-focused arm, JustWatch Media, that works with corporate clients, using data about what people watch that it gleans from user behavior to help entertainment companies tailor their marketing strategies. Its clients include Universal Pictures, Paramount Pictures, and Sony Pictures, among others. Development of the website began in 2014, and it was launched in the U.S. and Germany in February 2015. In 2018, the company received funding to improve databases within the European Union. In December 2019, the company acquired a rival streaming aggregation service, GoWatchIt, from Plexus Entertainment. JustWatch also used the acquisition to open its first New York office. In 2019, JustWatch had over 30 million users across 38 countries. By 2020, the company's streaming aggregation service was available in over 45 countries. By November 2023, it was available in 139 countries, and had over 40 million monthly users. === Founding === JustWatch was co-founded in 2013 by David Croyé, Cristoph Hoyer, Kevin Hiller, Dominik Raute, Ingke Weimert, and Michael Wilken. In a company blog post from February 2017, Croyé described the group of co-founders as all having previously "worked in leading roles at successful international tech-startups in Berlin." Croyé, who currently holds the title of CEO at JustWatch GmbH, had previously worked as the chief marketing officer at kaufDA, a European location-based mobile coupon and promotion service, and the background of other co-founders included time at the adtech company Trademob and the streaming site MyVideo. Startup capital for the website initially came from the founders themselves. Croyé in particular was able to reinvest funds he had obtained from the sale of kaufDA to Axel Springer, a European media company, in March 2011. Since 2015, the company has had at least one additional round of seed funding, with investors including venture capital groups CG Partners and STS Ventures.

    Read more →
  • Fling (social network)

    Fling (social network)

    Fling was a social media app available for IOS and Android. It was founded in 2014 by Marco Nardone and was taken offline in August 2016. == Overview == In 2012, Marco Nardone founded the startup Unii and launched Unii.com, a social network intended for students in the UK. While working on this service, Nardone had the idea for a messaging service where pictures could be sent to strangers in January 2014. The app Fling was then developed and released between March and July 2014. After a month, it already had 375,000 downloads and 180,000 active users on iOS. Users were able to take pictures inside the app and send them to 50 random people all over the world. The recipient could then choose to answer via chat or reply by sending a picture themselves. The app was used by many users as a medium to exchange sexually explicit pictures and for sexting with strangers. This led to the app being removed from the App Store in June 2015. In the 19 days that followed, flings developers rewrote the App almost completely from scratch, working around the clock. The feature to message random strangers was removed, and the app was readmitted into the App Store as a messenger App resembling Snapchat. But the redesigned Application did not have the success of its predecessor. The funding ran out and the parent company Unii went bankrupt. The company was not able to pay their content moderation team anymore, leading to a new surge of pornographic content on the App. Shortly after that, the Social Network was taken offline in August 2016. It has been inactive since. During the 2 years Fling was online, $21 million was raised from investors while generating no revenue at all. Of this $21 million (£16.5m), £5 million came from Nardone's father. == Allegations against CEO == Former employees made multiple allegations against Marco Nardone, the Founder and CEO of Unii and Fling. According to these claims, he behaved erratic and abusive, throwing "things across the office". He hired his girlfriend as the head of human resources to handle issues between him and his staff. Employees who left the company often had "some part of their pay held back". According to the reports, he also spent the money raised from investors irresponsibly, having no clear concept of a budget. Some of that money was used on expensive restaurants in London, a luxurious office for CEO Nardone and advertisements for Fling on Twitter and Facebook. Nardone also spent time partying in Ibiza with two employees, while the developer team in London frantically tried to get Fling back online after it being removed from the App Store. In December 2017 he pleaded guilty to assaulting his girlfriend at a domestic violence court.

    Read more →
  • Waveform graphics

    Waveform graphics

    Waveform graphics is a simple vector graphics system introduced by Digital Equipment Corporation (DEC) on the VT55 and VT105 terminals in the mid-1970s. It was used to produce graphics output from mainframes and minicomputers. DEC used the term "waveform graphics" to refer specifically to the hardware, but it was used more generally to describe the whole system. The system was designed to use as little computer memory as possible. At any given X location it could draw two dots at given Y locations, making it suitable for producing two superimposed waveforms, line charts or histograms. Text and graphics could be mixed, and there were additional tools for drawing axes and markers. The waveform graphics system was used only for a short period of time before it was replaced by the more sophisticated ReGIS system, first introduced on the VT125 in 1981. ReGIS allowed the construction of arbitrary vectors and other shapes. Whereas DEC normally provided a backward compatible solution in newer terminal models, they did not choose to do this when ReGIS was introduced, and waveform graphics disappeared from later terminals. == Description == Waveform graphics was introduced on the VT55 terminal in October 1975, an era when memory was extremely expensive. Although it was technically possible to produce a bitmap display using a framebuffer using technology of the era, the memory needed to do so at a reasonable resolution was typically beyond the price point that made it practical. All sorts of systems were used to replace computer memory with other concepts, like the storage tubes used in the Tektronix 4010 terminals, or the zero memory racing-the-beam system used in the Atari 2600. DEC chose to attack this problem through a clever use of a small buffer representing only the vertical positions on the screen. Such a system could not draw arbitrary shapes, but would allow the display of graph data. The system was based on a 512 by 236 pixel display, producing 512 vertical columns along the X-axis, and 236 horizontal rows on the Y-axis. Y locations were counted up from the bottom, so the coordinate 0,0 was in the lower left, and 511, 235 in the upper right. Had this been implemented using a framebuffer with each location represented by a single bit, 512 × 236 × 1 = 120,832 bits, or 15,104 bytes, would have been required. At the time, memory cost about $50 per kilobyte, so the buffer alone would cost over $700 (equivalent to $4,570 in 2025). Instead, the waveform graphic system used one byte of memory for each X axis location, with the byte's value representing the Y location. This required only 512 bytes for each graph, a total of 1024 bytes for the two graphs. Drawing a line required the programmer to construct a series of Y locations and send them as individual points, the terminal could not connect the dots itself. To make this easier, the terminal automatically incremented the X location every time an Y coordinate was received, so a graph line could be sent as a long string of numbers for subsequent Y locations instead of having to repeatedly send the X location every time. Drawing normally started by sending a single instruction to set the initial X location, often 0 on the left, and then sending in data for the entire curve. The system also included storage for up to 512 markers on both lines. These were always drawn centered on the Y value of the line they were associated with, meaning that a simple on/off indication for X locations was all that was needed, requiring only 1024 bits, or 128 bytes, in total. The markers extended 16 pixels vertically, and could only be aligned on 16-pixel boundaries, so they were not necessarily centered across the underlying graph. Markers were used to indicate important points on the graph, where a symbol of some sort would normally be used. The system also allowed a vertical line to be drawn for every horizontal location and a horizontal one at every vertical location. These were also stored as simple on/off bits, requiring another 128 bytes of memory. These lines were used to draw axes and scale lines, or could be used for a screen-spanning crosshair cursor. A separate set of two 7-bit registers held additional information about the drawing style and other settings. Although complex from the user's perspective, this system was easy to implement in hardware. A cathode ray tube produces a display by scanning the screen in a series of horizontal motions, moving down one vertical line after each horizontal scan. At any given instant during this process, the display hardware examines a few memory locations to see if anything needs to be displayed. For instance, it can determine whether to draw a marker on graph 0 by examining register 1 to see if markers are turned on, looking in the marker buffer to see if there is a 1 at the current X location, and then examining the Y location of graph 0 to see if it is within 16 pixels of the current scan line. If all of these are true, a spot is drawn to present that portion of the marker. As this will be true for 16 vertical locations during the scanning process, a 16-pixel high marker will be drawn. Sold alone, the VT55 was priced at $2,496 (equivalent to $16,295 in 2025),. Like other models of the VT50 series, the terminal could be equipped with an optional wet-paper printer in a panel on the right of the screen. This added $800 (equivalent to $5,223 in 2025) to the price. DEC also offered VT55 in a package with a small model of the PDP-11 to create one model of the DEClab 11/03 system. The DEClab normally sold for $14,000 (equivalent to $91,397 in 2025) with a DECwriter II (LA36) hard-copy terminal for $15,000 (equivalent to $97,925 in 2025), with the VT55. The system had I/O channels for up to 15 lab devices, and included libraries for FORTRAN and BASIC for reading the data and creating graphs. The fairly extensive VT55 Programmers Manual covered the latter in depth. == Commands and data == Data was sent to the terminal using an extended set of codes similar to those introduced on the VT52. VT52 codes generally started with the ESC character (octal 33, decimal 27) and was then followed by a single letter instruction. For instance, the string of four characters ESC H ESC J would reposition the cursor in the upper left (home) and then clear the screen from that point down. These codes were basically modeless; triggered by the ESC the resulting escape mode automatically exited again when the command was complete. Escape codes could be interspersed with display text anywhere in the stream of data. In contrast, the graphics system was entirely modal, with escape sequences being sent to cause the terminal to enter or exit graph drawing mode. Data sent between these two codes were interpreted by the graphics hardware, so text and graphics could not be mixed in a single stream of instructions. Graphics mode was entered by sending the string ESC 1, and exited again with the string ESC 2. Even the commands within the graphics mode were modal; characters were interpreted as being additional data for the previous load character (command) until another load character is seen. Ten load characters were available: @ - no operation, used to tell the terminal the last command is no longer active A - load data into register 0, selecting the drawing mode for the two graphs I - load data into register 1, selecting other drawing options H - load the starting X position (Horizontal) for the following commands B - load data for Y locations for graph 0 starting at the H position selected earlier J - load data for Y locations for graph 1 starting at the H position selected earlier C - store a marker on graph 0 at the following X location K - store a marker on graph 1 at the following X location D - draw a horizontal line at the given Y location L - draw a vertical line at the given X location X and Y locations were sent as 10-bit decimal numbers, encoded as ASCII characters, with 5 bits per character. This means that any number within the 1024 number space (210) can be stored as a string of two characters. To ensure the characters can be transmitted over 7-bit links, the pattern 01 is placed in front of both 5-bit numbers, producing 7-bit ASCII values that are always within the printable range. This results in a somewhat complex encoding algorithm. For instance, if one wanted to encode the decimal value 102, first you convert that to the 10-bit decimal pattern 0010010010. That is then split that into upper and lower 5-bit parts, 00100 and 10010. Then append 01 binary to produce 7-bit numbers 0100100 and 0110010. Individually convert back to decimal 40 and 50, and then look up those characters in an ASCII chart, finding ( and 2. These have to be sent to the terminal least significant character first. If these were being used to set the X coordinate, the complete string would be H2(. When used as X and Y locations for the graphs, extra digits were ignored. For instance, the 512 pixel X axis r

    Read more →
  • Cybersecurity in space

    Cybersecurity in space

    Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.

    Read more →