AI Chatbot Zoom

AI Chatbot Zoom — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Fillrate

  In computer graphics, a video card's pixel fillrate refers to the number of pixels that can be rendered on the screen and written to video memory in one second. Pixel fillrates are given in megapixels per second or in gigapixels per second (in the case of newer cards), and are obtained by multiplying the number of render output units (ROPs) by the clock frequency of the graphics processing unit (GPU) of a video card. A similar concept, texture fillrate, refers to the number of texture map elements (texels) the GPU can map to pixels in one second. Texture fillrate is obtained by multiplying the number of texture mapping units (TMUs) by the clock frequency of the GPU. Texture fillrates are given in mega or gigatexels per second. However, there is no full agreement on how to calculate and report fillrates. Another possible method is to multiply the number of pixel pipelines by the GPU's clock frequency. The results of these multiplications correspond to a theoretical number. The actual fillrate depends on many other factors. In the past, the fillrate has been used as an indicator of performance by video card manufacturers such as ATI and NVIDIA, however, the importance of the fillrate as a measurement of performance has declined as the bottleneck in graphics applications has shifted. For example, today, the number and speed of unified shader processing units has gained attention. Although fillrate doesn't provide a substantial bottleneck in games, it can still provide a bottleneck for certain parts of the game, for example applying a gaussian blur can be bottlenecked by fillrate. Scene complexity can be increased by overdrawing, which happens when an object is drawn to the frame buffer, and another object (such as a wall) is then drawn on top of it, covering it up. The time spent drawing the first object is thus wasted because it is not visible. When a sequence of scenes is extremely complex (many pixels have to be drawn for each scene), the frame rate for the sequence may drop. When designing graphics intensive applications, one can determine whether the application is fillrate-limited (or shader limited) by seeing if the frame rate increases dramatically when the application runs at a lower resolution or in a smaller window. Although this is not a full-proof method, modern videogame engines can dynamically reduce the level-of-detail required and thereby reducing fillrate-limited applications. The best way to find fillrate bottlenecks is to use GPU vendor software like NVIDIA Nsight Graphics, AMD Radeon GPU Profile and the Intel Graphics Performance Analyzers.

  Read more →
• 

  Randomized weighted majority algorithm

  The randomized weighted majority algorithm is an algorithm in machine learning theory for aggregating expert predictions to a series of decision problems. It is a simple and effective method based on weighted voting which improves on the mistake bound of the deterministic weighted majority algorithm. In fact, in the limit, its prediction rate can be arbitrarily close to that of the best-predicting expert. == Example == Imagine that every morning before the stock market opens, we get a prediction from each of our "experts" about whether the stock market will go up or down. Our goal is to somehow combine this set of predictions into a single prediction that we then use to make a buy or sell decision for the day. The principal challenge is that we do not know which experts will give better or worse predictions. The RWMA gives us a way to do this combination such that our prediction record will be nearly as good as that of the single expert which, in hindsight, gave the most accurate predictions. == Motivation == In machine learning, the weighted majority algorithm (WMA) is a deterministic meta-learning algorithm for aggregating expert predictions. In pseudocode, the WMA is as follows: initialize all experts to weight 1 for each round: add each expert's weight to the option they predicted predict the option with the largest weighted sum multiply the weights of all experts who predicted wrongly by 1 2 {\displaystyle {\frac {1}{2}}} Suppose there are n {\displaystyle n} experts and the best expert makes m {\displaystyle m} mistakes. Then, the weighted majority algorithm (WMA) makes at most 2.4 ( log 2 ⁡ n + m ) {\displaystyle 2.4(\log _{2}n+m)} mistakes. This bound is highly problematic in the case of highly error-prone experts. Suppose, for example, the best expert makes a mistake 20% of the time; that is, in N = 100 {\displaystyle N=100} rounds using n = 10 {\displaystyle n=10} experts, the best expert makes m = 20 {\displaystyle m=20} mistakes. Then, the weighted majority algorithm only guarantees an upper bound of 2.4 ( log 2 ⁡ 10 + 20 ) ≈ 56 {\displaystyle 2.4(\log _{2}10+20)\approx 56} mistakes. As this is a known limitation of the weighted majority algorithm, various strategies have been explored in order to improve the dependence on m {\displaystyle m} . In particular, we can do better by introducing randomization. Drawing inspiration from the Multiplicative Weights Update Method algorithm, we will probabilistically make predictions based on how the experts have performed in the past. Similarly to the WMA, every time an expert makes a wrong prediction, we will decrement their weight. Mirroring the MWUM, we will then use the weights to make a probability distribution over the actions and draw our action from this distribution (instead of deterministically picking the majority vote as the WMA does). == Randomized weighted majority algorithm (RWMA) == The randomized weighted majority algorithm is an attempt to improve the dependence of the mistake bound of the WMA on m {\displaystyle m} . Instead of predicting based on majority vote, the weights, are used as probabilities for choosing the experts in each round and are updated over time (hence the name randomized weighted majority). Precisely, if w i {\displaystyle w_{i}} is the weight of expert i {\displaystyle i} , let W = ∑ i w i {\displaystyle W=\sum _{i}w_{i}} . We will follow expert i {\displaystyle i} with probability w i W {\displaystyle {\frac {w_{i}}{W}}} . This results in the following algorithm: initialize all experts to weight 1. for each round: add all experts' weights together to obtain the total weight W {\displaystyle W} choose expert i {\displaystyle i} randomly with probability w i W {\displaystyle {\frac {w_{i}}{W}}} predict as the chosen expert predicts multiply the weights of all experts who predicted wrongly by β {\displaystyle \beta } The goal is to bound the worst-case expected number of mistakes, assuming that the adversary has to select one of the answers as correct before we make our coin toss. This is a reasonable assumption in, for instance, the stock market example provided above: the variance of a stock price should not depend on the opinions of experts that influence private buy or sell decisions, so we can treat the price change as if it was decided before the experts gave their recommendations for the day. The randomized algorithm is better in the worst case than the deterministic algorithm (weighted majority algorithm): in the latter, the worst case was when the weights were split 50/50. But in the randomized version, since the weights are used as probabilities, there would still be a 50/50 chance of getting it right. In addition, generalizing to multiplying the weights of the incorrect experts by β < 1 {\displaystyle \beta <1} instead of strictly 1 2 {\displaystyle {\frac {1}{2}}} allows us to trade off between dependence on m {\displaystyle m} and log 2 ⁡ n {\displaystyle \log _{2}n} . This trade-off will be quantified in the analysis section. == Analysis == Let W t {\displaystyle W_{t}} denote the total weight of all experts at round t {\displaystyle t} . Also let F t {\displaystyle F_{t}} denote the fraction of weight placed on experts which predict the wrong answer at round t {\displaystyle t} . Finally, let N {\displaystyle N} be the total number of rounds in the process. By definition, F t {\displaystyle F_{t}} is the probability that the algorithm makes a mistake on round t {\displaystyle t} . It follows from the linearity of expectation that if M {\displaystyle M} denotes the total number of mistakes made during the entire process, E [ M ] = ∑ t = 1 N F t {\displaystyle E[M]=\sum _{t=1}^{N}F_{t}} . After round t {\displaystyle t} , the total weight is decreased by ( 1 − β ) F t W t {\displaystyle \ (1-\beta )F_{t}W_{t}} , since all weights corresponding to a wrong answer are multiplied by β < 1 {\displaystyle \ \beta <1} . It then follows that W t + 1 = W t ( 1 − ( 1 − β ) F t ) {\displaystyle W_{t+1}=W_{t}(1-(1-\beta )F_{t})} . By telescoping, since W 1 = n {\displaystyle W_{1}=n} , it follows that the total weight after the process concludes is On the other hand, suppose that m {\displaystyle \ m} is the number of mistakes made by the best-performing expert. At the end, this expert has weight β m {\displaystyle \ \beta ^{m}} . It follows, then, that the total weight is at least this much; in other words, W ≥ β m {\displaystyle \ W\geq \beta ^{m}} . This inequality and the above result imply Taking the natural logarithm of both sides yields Now, the Taylor series of the natural logarithm is In particular, it follows that ln ⁡ ( 1 − ( 1 − β ) F t ) < − ( 1 − β ) F t {\displaystyle \ \ln(1-(1-\beta )F_{t})<-(1-\beta )F_{t}} . Thus, Recalling that E [ M ] = ∑ t = 1 N F t {\displaystyle E[M]=\sum _{t=1}^{N}F_{t}} and rearranging, it follows that Now, as β → 1 {\displaystyle \beta \to 1} from below, the first constant tends to 1 {\displaystyle 1} ; however, the second constant tends to + ∞ {\displaystyle +\infty } . To quantify this tradeoff, define ε = 1 − β {\displaystyle \varepsilon =1-\beta } to be the penalty associated with getting a prediction wrong. Then, again applying the Taylor series of the natural logarithm, It then follows that the mistake bound, for small ε {\displaystyle \varepsilon } , can be written in the form ( 1 + ϵ 2 + O ( ε 2 ) ) m + ϵ − 1 ln ⁡ ( n ) {\displaystyle \ \left(1+{\frac {\epsilon }{2}}+O(\varepsilon ^{2})\right)m+\epsilon ^{-1}\ln(n)} . In English, the less that we penalize experts for their mistakes, the more that additional experts will lead to initial mistakes but the closer we get to capturing the predictive accuracy of the best expert as time goes on. In particular, given a sufficiently low value of ε {\displaystyle \varepsilon } and enough rounds, the randomized weighted majority algorithm can get arbitrarily close to the correct prediction rate of the best expert. In particular, as long as m {\displaystyle m} is sufficiently large compared to ln ⁡ ( n ) {\displaystyle \ln(n)} (so that their ratio is sufficiently small), we can assign we can obtain an upper bound on the number of mistakes equal to This implies that the "regret bound" on the algorithm (that is, how much worse it performs than the best expert) is sublinear, at O ( m ln ⁡ ( n ) ) {\displaystyle O({\sqrt {m\ln(n)}})} . == Revisiting the motivation == Recall that the motivation for the randomized weighted majority algorithm was given by an example where the best expert makes a mistake 20% of the time. Precisely, in N = 100 {\displaystyle N=100} rounds, with n = 10 {\displaystyle n=10} experts, where the best expert makes m = 20 {\displaystyle m=20} mistakes, the deterministic weighted majority algorithm only guarantees an upper bound of 2.4 ( log 2 ⁡ 10 + 20 ) ≈ 56 {\displaystyle 2.4(\log _{2}10+20)\approx 56} . By the analysis above, it follows that minimizing the number of worst-case expected mistakes is equivalent to minimizing the fun

  Read more →
• 

  Multilinear subspace learning

  Multilinear subspace learning is an approach for disentangling the causal factor of data formation and performing dimensionality reduction. The Dimensionality reduction can be performed on a data tensor that contains a collection of observations that have been vectorized, or observations that are treated as matrices and concatenated into a data tensor. Here are some examples of data tensors whose observations are vectorized or whose observations are matrices concatenated into data tensor images (2D/3D), video sequences (3D/4D), and hyperspectral cubes (3D/4D). The mapping from a high-dimensional vector space to a set of lower dimensional vector spaces is a multilinear projection. When observations are retained in the same organizational structure as matrices or higher order tensors, their representations are computed by performing linear projections into the column space, row space and fiber space. Multilinear subspace learning algorithms are higher-order generalizations of linear subspace learning methods such as principal component analysis (PCA), independent component analysis (ICA), linear discriminant analysis (LDA) and canonical correlation analysis (CCA). == Background == Multilinear methods may be causal in nature and perform causal inference, or they may be simple regression methods from which no causal conclusion are drawn. Linear subspace learning algorithms are traditional dimensionality reduction techniques that are well suited for datasets that are the result of varying a single causal factor. Unfortunately, they often become inadequate when dealing with datasets that are the result of multiple causal factors. . Multilinear subspace learning can be applied to observations whose measurements were vectorized and organized into a data tensor for causally aware dimensionality reduction. These methods may also be employed in reducing horizontal and vertical redundancies irrespective of the causal factors when the observations are treated as a "matrix" (ie. a collection of independent column/row observations) and concatenated into a tensor. == Algorithms == === Multilinear principal component analysis === Historically, multilinear principal component analysis has been referred to as "M-mode PCA", a terminology which was coined by Peter Kroonenberg. In 2005, Vasilescu and Terzopoulos introduced the Multilinear PCA terminology as a way to better differentiate between multilinear tensor decompositions that computed 2nd order statistics associated with each data tensor mode, and subsequent work on Multilinear Independent Component Analysis that computed higher order statistics for each tensor mode. MPCA is an extension of PCA. === Multilinear independent component analysis === Multilinear independent component analysis is an extension of ICA. === Multilinear linear discriminant analysis === Multilinear extension of LDA TTP-based: Discriminant Analysis with Tensor Representation (DATER) TTP-based: General tensor discriminant analysis (GTDA) TVP-based: Uncorrelated Multilinear Discriminant Analysis (UMLDA) === Multilinear canonical correlation analysis === Multilinear extension of CCA TTP-based: Tensor Canonical Correlation Analysis (TCCA) TVP-based: Multilinear Canonical Correlation Analysis (MCCA) TVP-based: Bayesian Multilinear Canonical Correlation Analysis (BMTF) A TTP is a direct projection of a high-dimensional tensor to a low-dimensional tensor of the same order, using N projection matrices for an Nth-order tensor. It can be performed in N steps with each step performing a tensor-matrix multiplication (product). The N steps are exchangeable. This projection is an extension of the higher-order singular value decomposition (HOSVD) to subspace learning. Hence, its origin is traced back to the Tucker decomposition in 1960s. A TVP is a direct projection of a high-dimensional tensor to a low-dimensional vector, which is also referred to as the rank-one projections. As TVP projects a tensor to a vector, it can be viewed as multiple projections from a tensor to a scalar. Thus, the TVP of a tensor to a P-dimensional vector consists of P projections from the tensor to a scalar. The projection from a tensor to a scalar is an elementary multilinear projection (EMP). In EMP, a tensor is projected to a point through N unit projection vectors. It is the projection of a tensor on a single line (resulting a scalar), with one projection vector in each mode. Thus, the TVP of a tensor object to a vector in a P-dimensional vector space consists of P EMPs. This projection is an extension of the canonical decomposition, also known as the parallel factors (PARAFAC) decomposition. === Typical approach in MSL === There are N sets of parameters to be solved, one in each mode. The solution to one set often depends on the other sets (except when N=1, the linear case). Therefore, the suboptimal iterative procedure in is followed. Initialization of the projections in each mode For each mode, fixing the projection in all the other mode, and solve for the projection in the current mode. Do the mode-wise optimization for a few iterations or until convergence. This is originated from the alternating least square method for multi-way data analysis. == Code == MATLAB Tensor Toolbox by Sandia National Laboratories. The MPCA algorithm written in Matlab (MPCA+LDA included). The UMPCA algorithm written in Matlab (data included). The UMLDA algorithm written in Matlab (data included). == Tensor data sets == 3D gait data (third-order tensors): 128x88x20(21.2M); 64x44x20(9.9M); 32x22x10(3.2M);

  Read more →
• 

  Modern Hopfield network

  Modern Hopfield networks (also known as Dense Associative Memories) are generalizations of the classical Hopfield networks that break the linear scaling relationship between the number of input features and the number of stored memories. This is achieved by introducing stronger non-linearities (either in the energy function or neurons’ activation functions) leading to super-linear (even an exponential) memory storage capacity as a function of the number of feature neurons. The network still requires a sufficient number of hidden neurons. The key theoretical idea behind the modern Hopfield networks is to use an energy function and an update rule that is more sharply peaked around the stored memories in the space of neuron’s configurations compared to the classical Hopfield network. == Classical Hopfield networks == Hopfield networks are recurrent neural networks with dynamical trajectories converging to fixed point attractor states and described by an energy function. The state of each model neuron i {\textstyle i} is defined by a time-dependent variable V i {\displaystyle V_{i}} , which can be chosen to be either discrete or continuous. A complete model describes the mathematics of how the future state of activity of each neuron depends on the known present or previous activity of all the neurons. In the original Hopfield model of associative memory, the variables were binary, and the dynamics were described by a one-at-a-time update of the state of the neurons. An energy function quadratic in the V i {\displaystyle V_{i}} was defined, and the dynamics consisted of changing the activity of each single neuron i {\displaystyle i} only if doing so would lower the total energy of the system. This same idea was extended to the case of V i {\displaystyle V_{i}} being a continuous variable representing the output of neuron i {\displaystyle i} , and V i {\displaystyle V_{i}} being a monotonic function of an input current. The dynamics became expressed as a set of first-order differential equations for which the "energy" of the system always decreased. The energy in the continuous case has one term which is quadratic in the V i {\displaystyle V_{i}} (as in the binary model), and a second term which depends on the gain function (neuron's activation function). While having many desirable properties of associative memory, both of these classical systems suffer from a small memory storage capacity, which scales linearly with the number of input features. == Discrete variables == A simple example of the Modern Hopfield network can be written in terms of binary variables V i {\displaystyle V_{i}} that represent the active V i = + 1 {\displaystyle V_{i}=+1} and inactive V i = − 1 {\displaystyle V_{i}=-1} state of the model neuron i {\displaystyle i} . E = − ∑ μ = 1 N mem F ( ∑ i = 1 N f ξ μ i V i ) {\displaystyle E=-\sum \limits _{\mu =1}^{N_{\text{mem}}}F{\Big (}\sum \limits _{i=1}^{N_{f}}\xi _{\mu i}V_{i}{\Big )}} In this formula the weights ξ μ i {\textstyle \xi _{\mu i}} represent the matrix of memory vectors (index μ = 1... N mem {\displaystyle \mu =1...N_{\text{mem}}} enumerates different memories, and index i = 1... N f {\displaystyle i=1...N_{f}} enumerates the content of each memory corresponding to the i {\displaystyle i} -th feature neuron), and the function F ( x ) {\displaystyle F(x)} is a rapidly growing non-linear function. The update rule for individual neurons (in the asynchronous case) can be written in the following form V i ( t + 1 ) = sign ⁡ [ ∑ μ = 1 N mem ( F ( ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) − F ( − ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) ) ] {\displaystyle V_{i}^{(t+1)}=\operatorname {sign} {\bigg [}\sum \limits _{\mu =1}^{N_{\text{mem}}}{\bigg (}F{\Big (}\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}-F{\Big (}-\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}{\bigg )}{\bigg ]}} which states that in order to calculate the updated state of the i {\textstyle i} -th neuron the network compares two energies: the energy of the network with the i {\displaystyle i} -th neuron in the ON state and the energy of the network with the i {\displaystyle i} -th neuron in the OFF state, given the states of the remaining neuron. The updated state of the i {\displaystyle i} -th neuron selects the state that has the lowest of the two energies. In the limiting case when the non-linear energy function is quadratic F ( x ) = x 2 {\displaystyle F(x)=x^{2}} these equations reduce to the familiar energy function and the update rule for the classical binary Hopfield network. The memory storage capacity of these networks can be calculated for random binary patterns. For the power energy function F ( x ) = x n {\displaystyle F(x)=x^{n}} the maximal number of memories that can be stored and retrieved from this network without errors is given by N mem max ≈ 1 2 ( 2 n − 3 ) ! ! N f n − 1 ln ⁡ ( N f ) {\displaystyle N_{\text{mem}}^{\max }\approx {\frac {1}{2(2n-3)!!}}{\frac {N_{f}^{n-1}}{\ln(N_{f})}}} For an exponential energy function F ( x ) = e x {\textstyle F(x)=e^{x}} the memory storage capacity is exponential in the number of feature neurons N mem max ≈ 2 N f / 2 {\displaystyle N_{\text{mem}}^{\max }\approx 2^{N_{f}/2}} == Continuous variables == Modern Hopfield networks or Dense Associative Memories can be best understood in continuous variables and continuous time. Consider the network architecture, shown in Fig.1, and the equations for the neurons' state evolutionwhere the currents of the feature neurons are denoted by x i {\textstyle x_{i}} , and the currents of the memory neurons are denoted by h μ {\displaystyle h_{\mu }} ( h {\displaystyle h} stands for hidden neurons). There are no synaptic connections among the feature neurons or the memory neurons. A matrix ξ μ i {\displaystyle \xi _{\mu i}} denotes the strength of synapses from a feature neuron i {\displaystyle i} to the memory neuron μ {\displaystyle \mu } . The synapses are assumed to be symmetric, so that the same value characterizes a different physical synapse from the memory neuron μ {\displaystyle \mu } to the feature neuron i {\displaystyle i} . The outputs of the memory neurons and the feature neurons are denoted by f μ {\displaystyle f_{\mu }} and g i {\displaystyle g_{i}} , which are non-linear functions of the corresponding currents. In general these outputs can depend on the currents of all the neurons in that layer so that f μ = f ( { h μ } ) {\displaystyle f_{\mu }=f(\{h_{\mu }\})} and g i = g ( { x i } ) {\textstyle g_{i}=g(\{x_{i}\})} . It is convenient to define these activation function as derivatives of the Lagrangian functions for the two groups of neuronsThis way the specific form of the equations for neuron's states is completely defined once the Lagrangian functions are specified. Finally, the time constants for the two groups of neurons are denoted by τ f {\displaystyle \tau _{f}} and τ h {\displaystyle \tau _{h}} , I i {\displaystyle I_{i}} is the input current to the network that can be driven by the presented data. General systems of non-linear differential equations can have many complicated behaviors that can depend on the choice of the non-linearities and the initial conditions. For Hopfield networks, however, this is not the case - the dynamical trajectories always converge to a fixed point attractor state. This property is achieved because these equations are specifically engineered so that they have an underlying energy function The terms grouped into square brackets represent a Legendre transform of the Lagrangian function with respect to the states of the neurons. If the Hessian matrices of the Lagrangian functions are positive semi-definite, the energy function is guaranteed to decrease on the dynamical trajectory This property makes it possible to prove that the system of dynamical equations describing temporal evolution of neurons' activities will eventually reach a fixed point attractor state. In certain situations one can assume that the dynamics of hidden neurons equilibrates at a much faster time scale compared to the feature neurons, τ h ≪ τ f {\textstyle \tau _{h}\ll \tau _{f}} . In this case the steady state solution of the second equation in the system (1) can be used to express the currents of the hidden units through the outputs of the feature neurons. This makes it possible to reduce the general theory (1) to an effective theory for feature neurons only. The resulting effective update rules and the energies for various common choices of the Lagrangian functions are shown in Fig.2. In the case of log-sum-exponential Lagrangian function the update rule (if applied once) for the states of the feature neurons is the attention mechanism commonly used in many modern AI systems (see Ref. for the derivation of this result from the continuous time formulation). == Relationship to classical Hopfield network with continuous variables == Classical formulation of continuous Hopfield networks can be understood as a

  Read more →
• 

  Czekanowski distance

  The Czekanowski distance (sometimes shortened as CZD) is a per-pixel quality metric that estimates quality or similarity by measuring differences between pixels. Because it compares vectors with strictly non-negative elements, it is often used to compare colored images, as color values cannot be negative. This different approach has a better correlation with subjective quality assessment than PSNR. == Definition == Androutsos et al. give the Czekanowski coefficient as follows: d z ( i , j ) = 1 − 2 ∑ k = 1 p min ( x i k , x j k ) ∑ k = 1 p ( x i k + x j k ) {\displaystyle d_{z}(i,j)=1-{\frac {2\sum _{k=1}^{p}{\text{min}}(x_{ik},\ x_{jk})}{\sum _{k=1}^{p}(x_{ik}+x_{jk})}}} Where a pixel x i {\displaystyle x_{i}} is being compared to a pixel x j {\displaystyle x_{j}} on the k-th band of color – usually one for each of red, green and blue. For a pixel matrix of size M × N {\displaystyle M\times N} , the Czekanowski coefficient can be used in an arithmetic mean spanning all pixels to calculate the Czekanowski distance as follows: 1 M N ∑ i = 0 M − 1 ∑ j = 0 N − 1 ( 1 − 2 ∑ k = 1 3 min ( A k ( i , j ) , B k ( i , j ) ) ∑ k = 1 3 ( A k ( i , j ) + B k ( i , j ) ) ) {\displaystyle {\frac {1}{MN}}\sum _{i=0}^{M-1}\sum _{j=0}^{N-1}{\begin{pmatrix}1-{\frac {2\sum _{k=1}^{3}{\text{min}}(A_{k}(i,j),\ B_{k}(i,j))}{\sum _{k=1}^{3}(A_{k}(i,j)+B_{k}(i,j))}}\end{pmatrix}}} Where A k ( i , j ) {\displaystyle A_{k}(i,j)} is the (i, j)-th pixel of the k-th band of a color image and, similarly, B k ( i , j ) {\displaystyle B_{k}(i,j)} is the pixel that it is being compared to. == Uses == In the context of image forensics – for example, detecting if an image has been manipulated –, Rocha et al. report the Czekanowski distance is a popular choice for Color Filter Array (CFA) identification.

  Read more →
• 

  Farthest-first traversal

  In computational geometry, the farthest-first traversal of a compact metric space is a sequence of points in the space, where the first point is selected arbitrarily and each successive point is as far as possible from the set of previously-selected points. The same concept can also be applied to a finite set of geometric points, by restricting the selected points to belong to the set or equivalently by considering the finite metric space generated by these points. For a finite metric space or finite set of geometric points, the resulting sequence forms a permutation of the points, also known as the greedy permutation. Every prefix of a farthest-first traversal provides a set of points that is widely spaced and close to all remaining points. More precisely, no other set of equally many points can be spaced more than twice as widely, and no other set of equally many points can be less than half as far to its farthest remaining point. In part because of these properties, farthest-point traversals have many applications, including the approximation of the traveling salesman problem and the metric k-center problem. They may be constructed in polynomial time, or (for low-dimensional Euclidean spaces) approximated in near-linear time. == Definition and properties == A farthest-first traversal is a sequence of points in a compact metric space, with each point appearing at most once. If the space is finite, each point appears exactly once, and the traversal is a permutation of all of the points in the space. The first point of the sequence may be any point in the space. Each point p after the first must have the maximum possible distance to the set of points earlier than p in the sequence, where the distance from a point to a set is defined as the minimum of the pairwise distances to points in the set. A given space may have many different farthest-first traversals, depending both on the choice of the first point in the sequence (which may be any point in the space) and on ties for the maximum distance among later choices. Farthest-point traversals may be characterized by the following properties. Fix a number k, and consider the prefix formed by the first k points of the farthest-first traversal of any metric space. Let r be the distance between the final point of the prefix and the other points in the prefix. Then this subset has the following two properties: All pairs of the selected points are at distance at least r from each other, and All points of the metric space are at distance at most r from the subset. Conversely any sequence having these properties, for all choices of k, must be a farthest-first traversal. These are the two defining properties of a Delone set, so each prefix of the farthest-first traversal forms a Delone set. == Applications == Rosenkrantz, Stearns & Lewis (1977) used the farthest-first traversal to define the farthest-insertion heuristic for the travelling salesman problem. This heuristic finds approximate solutions to the travelling salesman problem by building up a tour on a subset of points, adding one point at a time to the tour in the ordering given by a farthest-first traversal. To add each point to the tour, one edge of the previous tour is broken and replaced by a pair of edges through the added point, in the cheapest possible way. Although Rosenkrantz et al. prove only a logarithmic approximation ratio for this method, they show that in practice it often works better than other insertion methods with better provable approximation ratios. Later, the same sequence of points was popularized by Gonzalez (1985), who used it as part of greedy approximation algorithms for two problems in clustering, in which the goal is to partition a set of points into k clusters. One of the two problems that Gonzalez solve in this way seeks to minimize the maximum diameter of a cluster, while the other, known as the metric k-center problem, seeks to minimize the maximum radius, the distance from a chosen central point of a cluster to the farthest point from it in the same cluster. For instance, the k-center problem can be used to model the placement of fire stations within a city, in order to ensure that every address within the city can be reached quickly by a fire truck. For both clustering problems, Gonzalez chooses a set of k cluster centers by selecting the first k points of a farthest-first traversal, and then creates clusters by assigning each input point to the nearest cluster center. If r is the distance from the set of k selected centers to the next point at position k + 1 in the traversal, then with this clustering every point is within distance r of its center and every cluster has diameter at most 2r. However, the subset of k centers together with the next point are all at distance at least r from each other, and any k-clustering would put some two of these points into a single cluster, with one of them at distance at least r/2 from its center and with diameter at least r. Thus, Gonzalez's heuristic gives an approximation ratio of 2 for both clustering problems. Gonzalez's heuristic was independently rediscovered for the metric k-center problem by Dyer & Frieze (1985), who applied it more generally to weighted k-center problems. Another paper on the k-center problem from the same time, Hochbaum & Shmoys (1985), achieves the same approximation ratio of 2, but its techniques are different. Nevertheless, Gonzalez's heuristic, and the name "farthest-first traversal", are often incorrectly attributed to Hochbaum and Shmoys. For both the min-max diameter clustering problem and the metric k-center problem, these approximations are optimal: the existence of a polynomial-time heuristic with any constant approximation ratio less than 2 would imply that P = NP. As well as for clustering, the farthest-first traversal can also be used in another type of facility location problem, the max-min facility dispersion problem, in which the goal is to choose the locations of k different facilities so that they are as far apart from each other as possible. More precisely, the goal in this problem is to choose k points from a given metric space or a given set of candidate points, in such a way as to maximize the minimum pairwise distance between the selected points. Again, this can be approximated by choosing the first k points of a farthest-first traversal. If r denotes the distance of the kth point from all previous points, then every point of the metric space or the candidate set is within distance r of the first k − 1 points. By the pigeonhole principle, some two points of the optimal solution (whatever it is) must both be within distance r of the same point among these first k − 1 chosen points, and (by the triangle inequality) within distance 2r of each other. Therefore, the heuristic solution given by the farthest-first traversal is within a factor of two of optimal. Other applications of the farthest-first traversal include color quantization (clustering the colors in an image to a smaller set of representative colors), progressive scanning of images (choosing an order to display the pixels of an image so that prefixes of the ordering produce good lower-resolution versions of the whole image rather than filling in the image from top to bottom), point selection in the probabilistic roadmap method for motion planning, simplification of point clouds, generating masks for halftone images, hierarchical clustering, finding the similarities between polygon meshes of similar surfaces, choosing diverse and high-value observation targets for underwater robot exploration, fault detection in sensor networks, modeling phylogenetic diversity, matching vehicles in a heterogenous fleet to customer delivery requests, uniform distribution of geodetic observatories on the Earth's surface or of other types of sensor network, generation of virtual point lights in the instant radiosity computer graphics rendering method, and geometric range searching data structures. == Algorithms == === Greedy exact algorithm === The farthest-first traversal of a finite point set may be computed by a greedy algorithm that maintains the distance of each point from the previously selected points, performing the following steps: Initialize the sequence of selected points to the empty sequence, and the distances of each point to the selected points to infinity. While not all points have been selected, repeat the following steps: Scan the list of not-yet-selected points to find a point p that has the maximum distance from the selected points. Remove p from the not-yet-selected points and add it to the end of the sequence of selected points. For each remaining not-yet-selected point q, replace the distance stored for q by the minimum of its old value and the distance from p to q. For a set of n points, this algorithm takes O(n2) steps and O(n2) distance computations. === Approximations === A faster approximation algorithm, given by Har-Peled & Mendel (2006), applie

  Read more →
• 

  International Conference on Computer Vision

  The International Conference on Computer Vision (ICCV) is a research conference sponsored by the Institute of Electrical and Electronics Engineers (IEEE) held every other year. It is considered to be one of the top conferences in computer vision, alongside CVPR and ECCV, and it is held on years in which ECCV is not. The conference is usually spread over four to five days. Typically, experts in the focus areas give tutorial talks on the first day, then the technical sessions (and poster sessions in parallel) follow. Recent conferences have also had an increasing number of focused workshops and a commercial exhibition. == Awards == === Azriel Rosenfeld Lifetime Achievement Award === The Azriel Rosenfeld Award, or Azriel Rosenfeld Lifetime Achievement Award, recognizes researchers who have made significant contributions to the field of computer vision over their careers. It is named in memory of computer scientist and mathematician Azriel Rosenfeld. The following people have received this award: === Helmholtz Prize === The ICCV Helmholtz Prize, known as the Test of Time Award before 2013, is awarded every other year at the ICCV, recognizing ICCV papers from ten or more years earlier that had a significant impact on computer vision research. Winners are selected by the IEEE Computer Society's Technical Committee on Pattern Analysis and Machine Intelligence. The award is named after the 19th century physician and physicist Hermann von Helmholtz, and the ICCV's award is not related to the various Helmholtz Prizes in physics, or the Hermann von Helmholtz Prize in neuroscience. === Marr Prize === The ICCV best-paper award is the Marr Prize, named after British neuroscientist David Marr. === Mark Everingham Prize === The Mark Everingham Prize is an award given yearly by the Technical Committee on Pattern Analysis and Machine Intelligence of the IEEE Computer Society at the IEEE International Conference on Computer Vision or the European Conference on Computer Vision to commemorate the late Mark Everingham, "one of the rising stars of computer vision", and to encourage others to follow in his footsteps by acting to further progress in the computer vision community as a whole. The prize is given to a researcher, or a team of researchers, who have made a selfless contribution of significant benefit to other members of the computer vision community. The Mark Everingham Prize for Rigorous Evaluation was an award given in 2012 at the British Machine Vision Conference. === PAMI Distinguished Researcher Award === The PAMI Distinguished Researcher Award (until 2013 called Significant Researcher Award) is awarded to candidates whose research projects have significantly contributed to the progress of computer vision. Awards are made based on major research contributions, as well as the role of those contributions in influencing and inspiring other research. Candidates are nominated by the community. The following people have received this award: == Conference list == The conference is usually held in the Spring in various international locations.

  Read more →
• 

  VITAL (machine learning software)

  VITAL (Validating Investment Tool for Advancing Life Sciences) was a Board Management Software machine learning proprietary software developed by Aging Analytics, a company registered in Bristol (England) and dissolved in 2017. Andrew Garazha (the firm's Senior Analyst) declared that the project aimed "through iterative releases and updates to create a piece of software capable of making autonomous investment decisions." According to Nick Dyer-Witheford, VITAL 1.0 was a "basic algorithm". On 13 May 2014, Deep Knowledge Ventures, a Hong Kong venture capital firm, claimed to have appointed VITAL to its board of directors in order to prove that artificial intelligence could be an instrument for investment decision-making. The announcement received great press coverage despite the fact commentators consider this a publicity stunt. Fortune reported in 2019 that VITAL is no longer used. == Criticism == Academics and journalists viewed VITAL's board appointment with skepticism. University of Sheffield computer science professor Noel Sharkey called it "a publicity hype". Michael Osborne, a University of Oxford associate professor in machine learning, found it is "a gimmick to call that an actual board member". Simon Sharwood of The Register, wrote there is "a strong whiff of stunt and/or promotion about this". In a 2019 speech, the Chief Scientist of Australia, Alan Finkel, commented, "At the time, most of us probably dismissed Vital as a PR exercise. I admit, I used her story three years ago to get a laugh in one of my speeches." Florian Möslein, a law professor at the University of Marburg, wrote in 2018 that "Vital has widely been acknowledged as the 'world's first artificial intelligence company director'". Vice journalist Jason Koebler suggested that the software did not have any article intelligence capabilities and concluded "VITAL can’t talk, and it can’t hear, and it can’t be a real, functional executive of a company." Sharwood of The Register noted that because VITAL was not a natural person, it could not be a board member under Hong Kong's corporate governance laws. However, in a 2017 interview to The Nikkei, Dmitry Kaminskiy, managing partner of Deep Knowledge Ventures, stated that VITAL had observer status on the board and no voting rights. University of Sheffield computer science professor Noel Sharkey said of VITAL, "On first sight, it looks like a futuristic idea but on reflection it is really a little bit of publicity hype." Vice journalist Jason Koebler said "this is a gimmick" and said "There is literally nothing to suggest that VITAL has any sort of capabilities beyond any other proprietary analysis software". Michael Osborne, a University of Oxford associate professor in machine learning, found VITAL's appointment to be noncredible, saying it is "a bit of a gimmick to call that an actual board member". Osborne said that a core duty of board members to converse with each other, which the algorithm is incapable of doing, so its more likely functionality is to serve as a springboard for conversation among other board members. In a 2019 speech, the Chief Scientist of Australia, Alan Finkel, commented, "At the time, most of us probably dismissed Vital as a PR exercise. I admit, I used her story three years ago to get a laugh in one of my speeches." == Machine intelligence as board member == VITAL was created by a group of programmers employed by Aging Analytics According to Andrew Garazh, Aging Analytics Senior Analyst, VITAL was not a machine learning algorithm as the necessary datasets on investment rounds, intellectual property and clinical trial outcomes are generally not disclosed. Rather, VITAL used fuzzy logic based on 50 parameters to assess risk factors. Aging Analytics licensed the software to Deep Knowledge Ventures. It was used to help the human board members of Deep Knowledge Venture make investment decisions in biotechnology companies. For instance, it supported investments in Insilico Medicine, which creates ways for computers to help find drugs in research into aging. VITAL also supported investing in Pathway Pharmaceuticals, which uses the OncoFinder algorithm to choose and appraise cancer treatments. According to Dmitry Kaminskiy, managing partner of Deep Knowledge Ventures, the motivation for using VITAL was the large number of failed investments in the biotechnology sector and the desire to avoid investing in companies likely to fail. == Ethical and legal implications == Scholars addressed questions around the safety, privacy, accountability transparency and bias in algorithms. Writing in the philosophical journal Multitudes, the academic Ariel Kyrou raised questions about the consequences of a mistake made by an algorithm recommending a dangerous investment. He raised the hypothetical where VITAL was able to persuade the board to invest in a startup that had the facade of doing research into treatment for age-associated ills, but in actuality was run by terrorists who were raising funds. Kyrou raised a series of questions about who society would fault for VITAL's mistake. As the owner of VITAL, should Deep Knowledge Ventures be held accountable, or rather should the companies that supplied data to VITAL or the people who created VITAL be held liable? Simon Sharwood of The Register wrote that because the appointment of a software program to the board directors is not legally feasible in Hong Kong, there is "a strong whiff of stunt and/or promotion about this". Quoting a Thomson Reuters website describing Hong Kong legislation related to corporate governance, Sharwood pointed out that in Hong Kong "the board comprises all of the directors of the company" and "a director must normally be a natural person, except that a private company may have a body corporate as its director if the company is not a member of a listed group." He concluded that since VITAL cannot be considered a "natural person", it is merely a "cosmetic" appointment to the board and that "this software is no more a Board member than Caligula's horse was a senator". Sharwood further argued that corporations frequently purchase directors and officers liability insurance but that it would be practically impossible to get such insurance for VITAL. Sharwood also wrote that were VITAL to be hacked, any misinformation it outputs could be considered "false and misleading communications". In the book Research Handbook on the Law of Artificial Intelligence, Florian Mölein wrote that VITAL could not become a director as defined in Hong Kong's corporate laws, so the other directors just were approaching it as "a member of [the] board with observer status". Lin Shaowei raised concerns in a Journal of East China University of Political Science and Law article about how the software's appearance inspired a complex question about the relationship between corporate law and artificial intelligence. VITAL could be considered either a board director who has voting rights or an observer who does not. Lin said either choice raised questions about whether VITAL is subject to corporate law and who would be held accountable if VITAL recommends a choice that turns out to be damaging to the company. David Theo Goldberg in the Critical Times, a peer reviewed journal in Critical Global Theory, argues that VITAL processed a dataset to predict the most remunerative investment opportunities. Drawing his analysis on an article from Business Insider, Goldberg describes VITAL's decision-making predictiveness based "on surface pattern recognition and the identification of regularities and/or irregularities". In other words, Goldberg asserts that "the normativity of the surface" explains algorithmic knowledge of a "product" like VITAL. In Homo Deus, Yuval Noah Harari mentions VITAL as an example of the future risks that humankind faces. Harari argues that the human mind is being replaced by a world in which algorithms and data make the decisions. Specifically, it is argued that "as algorithms push humans out of the job market," executive boards driven by artificial intelligence are more likely to give priority to algorithms over the humans.

  Read more →
• 

  Sketchpad

  Sketchpad (a.k.a. Robot Draftsman) is a computer program written by Ivan Sutherland in 1963 in the course of his PhD thesis, for which he received the Turing Award in 1988, and the Kyoto Prize in 2012. It pioneered human–computer interaction (HCI), and is considered the ancestor of modern computer-aided design (CAD) programs and as a major breakthrough in the development of computer graphics in general. For example, Sketchpad inspired the graphical user interface (GUI) and object-oriented programming. Using the program, Sutherland showed that computer graphics could be used for both artistic and technical purposes and for demonstrating a novel method of human–computer interaction. == History == See History of the graphical user interface for a more detailed discussion of GUI development. == Software == Sketchpad was the earliest program ever to use a complete graphical user interface. The clever way the program organizes its geometric data pioneered the use of master (objects) and occurrences (instances) in computing and pointed forward to object-oriented programming. The main idea was to have master drawings which can be instantiated into many duplicates. When a master drawing is changed, then all instances change also. This was the first known form of an entity component system: for example instead of encapsulating points inside of a line object, the points are stored in a ring buffer as described in pages 48 to 52 of the paper, and the line only points to them. This allowed moving one point to alter all the shapes that use it in a single operation. The structures in Sketchpad were also able to store pointers to functions, to achieve a different behavior depending on the kind of object. In figure 3.8 of the paper, the "instances generic block" stores several "subroutine entries" which are pointers to functions: "display", "howbig" etc. This was an early form of virtual functions. Geometric constraints was another major invention in Sketchpad, letting a user easily constrain geometric properties in the drawing: for instance, the length of a line or the angle between two lines could be fixed. As a trade magazine said, clearly Sutherland "broke new ground in 3D computer modeling and visual simulation, the basis for computer graphics and CAD/CAM". Very few programs can be called precedents for his achievements. Patrick J. Hanratty is sometimes called the "father of CAD/CAM" and wrote PRONTO, a numerical control language at General Electric in 1957, and wrote CAD software while working for General Motors beginning in 1961. Sutherland wrote in his thesis that Bolt, Beranek and Newman had a "similar program" and T-Square was developed by Peter Samson and one or more fellow MIT students in 1962, both for the PDP-1. The Computer History Museum holds program listings for Sketchpad. == Hardware == Sketchpad ran on the MIT Lincoln Laboratory TX-2 (1958) computer at the Massachusetts Institute of Technology (MIT), which had 64k of 36-bit words. The user drew on the computer monitor screen with the recently invented light pen, which relayed information on its position by computing at what time the light from the scanning cathode-ray tube screen is detected. To configure the initial position of the light pen, the word INK was displayed on the screen, which, upon tapping, initialised the program with a white cross to continue keeping track of the pen's movement relative to its prior position. Of the 36 bits available to store each display spot in the display file, 20 gave the coordinates of that spot for the display system and the remaining 16 gave the address of the n-component element responsible for adding that spot to display. The TX-2 was an experimental machine and the hardware changed often (on Wednesdays, according to Sutherland). By 1975, the light pen and the cathode-ray tube with which it had been used had been removed. == Publications == The Sketchpad program was part and parcel of Sutherland's Ph.D. thesis at MIT and peripherally related to the Computer-Aided Design project at that time. Sketchpad: A Man-Machine Graphical Communication System.

  Read more →
• 

  Vapnik–Chervonenkis theory

  Vapnik–Chervonenkis theory (also known as VC theory) was developed during 1960–1990 by Vladimir Vapnik and Alexey Chervonenkis. The theory is a form of computational learning theory, which attempts to explain the learning process from a statistical point of view. == Introduction == VC theory covers at least four parts (as explained in The Nature of Statistical Learning Theory): Theory of consistency of learning processes What are (necessary and sufficient) conditions for consistency of a learning process based on the empirical risk minimization principle? Nonasymptotic theory of the rate of convergence of learning processes How fast is the rate of convergence of the learning process? Theory of controlling the generalization ability of learning processes How can one control the rate of convergence (the generalization ability) of the learning process? Theory of constructing learning machines How can one construct algorithms that can control the generalization ability? VC Theory is a major subbranch of statistical learning theory. One of its main applications in statistical learning theory is to provide generalization conditions for learning algorithms. From this point of view, VC theory is related to stability, which is an alternative approach for characterizing generalization. In addition, VC theory and VC dimension are instrumental in the theory of empirical processes, in the case of processes indexed by VC classes. Arguably these are the most important applications of the VC theory, and are employed in proving generalization. Several techniques will be introduced that are widely used in the empirical process and VC theory. The discussion is mainly based on the book Weak Convergence and Empirical Processes: With Applications to Statistics. == Overview of VC theory in empirical processes == === Background on empirical processes === Let ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} be a measurable space. For any measure Q {\displaystyle Q} on ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} , and any measurable functions f : X → R {\displaystyle f:{\mathcal {X}}\to \mathbf {R} } , define Q f = ∫ f d Q {\displaystyle Qf=\int fdQ} Measurability issues will be ignored here, for more technical detail see. Let F {\displaystyle {\mathcal {F}}} be a class of measurable functions f : X → R {\displaystyle f:{\mathcal {X}}\to \mathbf {R} } and define: ‖ Q ‖ F = sup { | Q f | : f ∈ F } . {\displaystyle \|Q\|_{\mathcal {F}}=\sup\{\vert Qf\vert \ :\ f\in {\mathcal {F}}\}.} Let X 1 , … , X n {\displaystyle X_{1},\ldots ,X_{n}} be independent, identically distributed random elements of ( X , A ) {\displaystyle ({\mathcal {X}},{\mathcal {A}})} . Then define the empirical measure P n = n − 1 ∑ i = 1 n δ X i , {\displaystyle \mathbb {P} _{n}=n^{-1}\sum _{i=1}^{n}\delta _{X_{i}},} where δ here stands for the Dirac measure. The empirical measure induces a map F → R {\displaystyle {\mathcal {F}}\to \mathbf {R} } given by: f ↦ P n f = 1 n ( f ( X 1 ) + . . . + f ( X n ) ) {\displaystyle f\mapsto \mathbb {P} _{n}f={\frac {1}{n}}(f(X_{1})+...+f(X_{n}))} Now suppose P is the underlying true distribution of the data, which is unknown. Empirical Processes theory aims at identifying classes F {\displaystyle {\mathcal {F}}} for which statements such as the following hold: uniform law of large numbers: ‖ P n − P ‖ F → n 0 , {\displaystyle \|\mathbb {P} _{n}-P\|_{\mathcal {F}}{\underset {n}{\to }}0,} That is, as n → ∞ {\displaystyle n\to \infty } , | 1 n ( f ( X 1 ) + . . . + f ( X n ) ) − ∫ f d P | → 0 {\displaystyle \left|{\frac {1}{n}}(f(X_{1})+...+f(X_{n}))-\int fdP\right|\to 0} uniformly for all f ∈ F {\displaystyle f\in {\mathcal {F}}} . uniform central limit theorem: G n = n ( P n − P ) ⇝ G , in ℓ ∞ ( F ) {\displaystyle \mathbb {G} _{n}={\sqrt {n}}(\mathbb {P} _{n}-P)\rightsquigarrow \mathbb {G} ,\quad {\text{in }}\ell ^{\infty }({\mathcal {F}})} In the former case F {\displaystyle {\mathcal {F}}} is called Glivenko–Cantelli class, and in the latter case (under the assumption ∀ x , sup f ∈ F | f ( x ) − P f | < ∞ {\displaystyle \forall x,\sup \nolimits _{f\in {\mathcal {F}}}\vert f(x)-Pf\vert <\infty } ) the class F {\displaystyle {\mathcal {F}}} is called Donsker or P-Donsker. A Donsker class is Glivenko–Cantelli in probability by an application of Slutsky's theorem. These statements are true for a single f {\displaystyle f} , by standard LLN, CLT arguments under regularity conditions, and the difficulty in the Empirical Processes comes in because joint statements are being made for all f ∈ F {\displaystyle f\in {\mathcal {F}}} . Intuitively then, the set F {\displaystyle {\mathcal {F}}} cannot be too large, and as it turns out that the geometry of F {\displaystyle {\mathcal {F}}} plays a very important role. One way of measuring how big the function set F {\displaystyle {\mathcal {F}}} is to use the so-called covering numbers. The covering number N ( ε , F , ‖ ⋅ ‖ ) {\displaystyle N(\varepsilon ,{\mathcal {F}},\|\cdot \|)} is the minimal number of balls { g : ‖ g − f ‖ < ε } {\displaystyle \{g:\|g-f\|<\varepsilon \}} needed to cover the set F {\displaystyle {\mathcal {F}}} (here it is obviously assumed that there is an underlying norm on F {\displaystyle {\mathcal {F}}} ). The entropy is the logarithm of the covering number. Two sufficient conditions are provided below, under which it can be proved that the set F {\displaystyle {\mathcal {F}}} is Glivenko–Cantelli or Donsker. A class F {\displaystyle {\mathcal {F}}} is P-Glivenko–Cantelli if it is P-measurable with envelope F such that P ∗ F < ∞ {\displaystyle P^{\ast }F<\infty } and satisfies: ∀ ε > 0 sup Q N ( ε ‖ F ‖ Q , F , L 1 ( Q ) ) < ∞ . {\displaystyle \forall \varepsilon >0\quad \sup \nolimits _{Q}N(\varepsilon \|F\|_{Q},{\mathcal {F}},L_{1}(Q))<\infty .} The next condition is a version of Dudley's theorem. If F {\displaystyle {\mathcal {F}}} is a class of functions such that ∫ 0 ∞ sup Q log ⁡ N ( ε ‖ F ‖ Q , 2 , F , L 2 ( Q ) ) d ε < ∞ {\displaystyle \int _{0}^{\infty }\sup \nolimits _{Q}{\sqrt {\log N\left(\varepsilon \|F\|_{Q,2},{\mathcal {F}},L_{2}(Q)\right)}}d\varepsilon <\infty } then F {\displaystyle {\mathcal {F}}} is P-Donsker for every probability measure P such that P ∗ F 2 < ∞ {\displaystyle P^{\ast }F^{2}<\infty } . In the last integral, the notation means ‖ f ‖ Q , 2 = ( ∫ | f | 2 d Q ) 1 2 {\displaystyle \|f\|_{Q,2}=\left(\int |f|^{2}dQ\right)^{\frac {1}{2}}} . === Symmetrization === The majority of the arguments about how to bound the empirical process rely on symmetrization, maximal and concentration inequalities, and chaining. Symmetrization is usually the first step of the proofs, and since it is used in many machine learning proofs on bounding empirical loss functions (including the proof of the VC inequality which is discussed in the next section). It is presented here: Consider the empirical process: f ↦ ( P n − P ) f = 1 n ∑ i = 1 n ( f ( X i ) − P f ) {\displaystyle f\mapsto (\mathbb {P} _{n}-P)f={\dfrac {1}{n}}\sum _{i=1}^{n}(f(X_{i})-Pf)} Turns out that there is a connection between the empirical and the following symmetrized process: f ↦ P n 0 f = 1 n ∑ i = 1 n ε i f ( X i ) {\displaystyle f\mapsto \mathbb {P} _{n}^{0}f={\dfrac {1}{n}}\sum _{i=1}^{n}\varepsilon _{i}f(X_{i})} The symmetrized process is a Rademacher process, conditionally on the data X i {\displaystyle X_{i}} . Therefore, it is a sub-Gaussian process by Hoeffding's inequality. Lemma (Symmetrization). For every nondecreasing, convex Φ: R → R and class of measurable functions F {\displaystyle {\mathcal {F}}} , E Φ ( ‖ P n − P ‖ F ) ≤ E Φ ( 2 ‖ P n 0 ‖ F ) {\displaystyle \mathbb {E} \Phi (\|\mathbb {P} _{n}-P\|_{\mathcal {F}})\leq \mathbb {E} \Phi \left(2\left\|\mathbb {P} _{n}^{0}\right\|_{\mathcal {F}}\right)} The proof of the Symmetrization lemma relies on introducing independent copies of the original variables X i {\displaystyle X_{i}} (sometimes referred to as a ghost sample) and replacing the inner expectation of the LHS by these copies. After an application of Jensen's inequality different signs could be introduced (hence the name symmetrization) without changing the expectation. The proof can be found below because of its instructive nature. The same proof method can be used to prove the Glivenko–Cantelli theorem. A typical way of proving empirical CLTs, first uses symmetrization to pass the empirical process to P n 0 {\displaystyle \mathbb {P} _{n}^{0}} and then argue conditionally on the data, using the fact that Rademacher processes are simple processes with nice properties. === VC Connection === It turns out that there is a fascinating connection between certain combinatorial properties of the set F {\displaystyle {\mathcal {F}}} and the entropy numbers. Uniform covering numbers can be controlled by the notion of Vapnik–Chervonenkis classes of sets – or shortly VC sets. Consider a collection C {\displaystyle {\mathcal {C}}} of subsets of the sample space X {\displaystyle

  Read more →
• 

  Linear discriminant analysis

  Linear discriminant analysis (LDA), normal discriminant analysis (NDA), canonical variates analysis (CVA), or discriminant function analysis is a generalization of Fisher's linear discriminant, a method used in statistics and other fields, to find a linear combination of features that characterizes or separates two or more classes of objects or events. The resulting combination may be used as a linear classifier, or, more commonly, for dimensionality reduction before later classification. LDA is closely related to analysis of variance (ANOVA) and regression analysis, which also attempt to express one dependent variable as a linear combination of other features or measurements. However, ANOVA uses categorical independent variables and a continuous dependent variable, whereas discriminant analysis has continuous independent variables and a categorical dependent variable (i.e. the class label). Logistic regression and probit regression are more similar to LDA than ANOVA is, as they also explain a categorical variable by the values of continuous independent variables. These other methods are preferable in applications where it is not reasonable to assume that the independent variables have a normal distribution, which is a fundamental assumption of the LDA method. LDA is also closely related to principal component analysis (PCA) and factor analysis in that they both look for linear combinations of variables which best explain the data. LDA explicitly attempts to model the difference between the classes of data. PCA, in contrast, does not take into account any difference in class, and factor analysis builds the feature combinations based on similarities rather than differences. Discriminant analysis is also different from factor analysis in that it is not an interdependence technique: a distinction between independent variables and dependent variables (also called criterion variables) must be made. LDA works when the measurements made on independent variables for each observation are continuous quantities. When dealing with categorical independent variables, the equivalent technique is discriminant correspondence analysis. Discriminant analysis is used when groups are known a priori (unlike in cluster analysis). Each case must have a score on one or more quantitative predictor measures, and a score on a group measure. In simple terms, discriminant function analysis is classification - the act of distributing things into groups, classes or categories of the same type. == History == The original dichotomous discriminant analysis was developed by Sir Ronald Fisher in 1936. It is different from an ANOVA or MANOVA, which is used to predict one (ANOVA) or multiple (MANOVA) continuous dependent variables by one or more independent categorical variables. Discriminant function analysis is useful in determining whether a set of variables is effective in predicting category membership. == LDA for two classes == Consider a set of observations x → {\displaystyle {\vec {x}}} (also called features, attributes, variables or measurements) for each sample of an object or event with known class y {\displaystyle y} . This set of samples is called the training set in a supervised learning context. The classification problem is then to find a good predictor for the class y {\displaystyle y} of any sample of the same distribution (not necessarily from the training set) given only an observation x → {\displaystyle {\vec {x}}} . LDA approaches the problem by assuming that the conditional probability density functions p ( x → | y = 0 ) {\displaystyle p({\vec {x}}|y=0)} and p ( x → | y = 1 ) {\displaystyle p({\vec {x}}|y=1)} are both the normal distribution with mean and covariance parameters ( μ → 0 , Σ 0 ) {\displaystyle \left({\vec {\mu }}_{0},\Sigma _{0}\right)} and ( μ → 1 , Σ 1 ) {\displaystyle \left({\vec {\mu }}_{1},\Sigma _{1}\right)} , respectively. Under this assumption, the Bayes-optimal solution is to predict points as being from the second class if the log of the likelihood ratios is bigger than some threshold T, so that: 1 2 ( x → − μ → 0 ) T Σ 0 − 1 ( x → − μ → 0 ) + 1 2 ln ⁡ | Σ 0 | − 1 2 ( x → − μ → 1 ) T Σ 1 − 1 ( x → − μ → 1 ) − 1 2 ln ⁡ | Σ 1 | > T {\displaystyle {\frac {1}{2}}({\vec {x}}-{\vec {\mu }}_{0})^{\mathrm {T} }\Sigma _{0}^{-1}({\vec {x}}-{\vec {\mu }}_{0})+{\frac {1}{2}}\ln |\Sigma _{0}|-{\frac {1}{2}}({\vec {x}}-{\vec {\mu }}_{1})^{\mathrm {T} }\Sigma _{1}^{-1}({\vec {x}}-{\vec {\mu }}_{1})-{\frac {1}{2}}\ln |\Sigma _{1}|\ >\ T} Without any further assumptions, the resulting classifier is referred to as quadratic discriminant analysis (QDA). LDA instead makes the additional simplifying homoscedasticity assumption (i.e. that the class covariances are identical, so Σ 0 = Σ 1 = Σ {\displaystyle \Sigma _{0}=\Sigma _{1}=\Sigma } ) and that the covariances have full rank. In this case, several terms cancel: x → T Σ 0 − 1 x → = x → T Σ 1 − 1 x → {\displaystyle {\vec {x}}^{\mathrm {T} }\Sigma _{0}^{-1}{\vec {x}}={\vec {x}}^{\mathrm {T} }\Sigma _{1}^{-1}{\vec {x}}} x → T Σ i − 1 μ → i = μ → i T Σ i − 1 x → {\displaystyle {\vec {x}}^{\mathrm {T} }{\Sigma _{i}}^{-1}{\vec {\mu }}_{i}={{\vec {\mu }}_{i}}^{\mathrm {T} }{\Sigma _{i}}^{-1}{\vec {x}}} because both sides are scalar and transpose to each other ( Σ i {\displaystyle \Sigma _{i}} is Hermitian) and the above decision criterion becomes a threshold on the dot product w → T x → > c {\displaystyle {\vec {w}}^{\mathrm {T} }{\vec {x}}>c} for some threshold constant c, where w → = Σ − 1 ( μ → 1 − μ → 0 ) {\displaystyle {\vec {w}}=\Sigma ^{-1}({\vec {\mu }}_{1}-{\vec {\mu }}_{0})} c = 1 2 w → T ( μ → 1 + μ → 0 ) {\displaystyle c={\frac {1}{2}}\,{\vec {w}}^{\mathrm {T} }({\vec {\mu }}_{1}+{\vec {\mu }}_{0})} This means that the criterion of an input x → {\displaystyle {\vec {x}}} being in a class y {\displaystyle y} is purely a function of this linear combination of the known observations. It is often useful to see this conclusion in geometrical terms: the criterion of an input x → {\displaystyle {\vec {x}}} being in a class y {\displaystyle y} is purely a function of projection of multidimensional-space point x → {\displaystyle {\vec {x}}} onto vector w → {\displaystyle {\vec {w}}} (thus, we only consider its direction). In other words, the observation belongs to y {\displaystyle y} if corresponding x → {\displaystyle {\vec {x}}} is located on a certain side of a hyperplane perpendicular to w → {\displaystyle {\vec {w}}} . The location of the plane is defined by the threshold c {\displaystyle c} . == Assumptions == The assumptions of discriminant analysis are the same as those for MANOVA. The analysis is quite sensitive to outliers and the size of the smallest group must be larger than the number of predictor variables. Multivariate normality: Independent variables are normal for each level of the grouping variable. Homogeneity of variance/covariance (homoscedasticity): Variances among group variables are the same across levels of predictors. Can be tested with Box's M statistic. It has been suggested, however, that linear discriminant analysis be used when covariances are equal, and that quadratic discriminant analysis may be used when covariances are not equal. Independence: Participants are assumed to be randomly sampled, and a participant's score on one variable is assumed to be independent of scores on that variable for all other participants. It has been suggested that discriminant analysis is relatively robust to slight violations of these assumptions, and it has also been shown that discriminant analysis may still be reliable when using dichotomous variables (where multivariate normality is often violated). == Discriminant functions == Discriminant analysis works by creating one or more linear combinations of predictors, creating a new latent variable for each function. These functions are called discriminant functions. The number of functions possible is either N g − 1 {\displaystyle N_{g}-1} where N g {\displaystyle N_{g}} = number of groups, or p {\displaystyle p} (the number of predictors), whichever is smaller. The first function created maximizes the differences between groups on that function. The second function maximizes differences on that function, but also must not be correlated with the previous function. This continues with subsequent functions with the requirement that the new function not be correlated with any of the previous functions. Given group j {\displaystyle j} , with R j {\displaystyle \mathbb {R} _{j}} sets of sample space, there is a discriminant rule such that if x ∈ R j {\displaystyle x\in \mathbb {R} _{j}} , then x ∈ j {\displaystyle x\in j} . Discriminant analysis then, finds “good” regions of R j {\displaystyle \mathbb {R} _{j}} to minimize classification error, therefore leading to a high percent correct classified in the classification table. Each function is given a discriminant score to determine how well it predicts group placement. Structure Corr

  Read more →
• 

  Random projection

  In mathematics and statistics, random projection is a technique used to reduce the dimensionality of a set of points which lie in Euclidean space. According to theoretical results, random projection preserves distances well, but empirical results are sparse. They have been applied to many natural language tasks under the name random indexing. == Dimensionality reduction == Dimensionality reduction, as the name suggests, is reducing the number of random variables using various mathematical methods from statistics and machine learning. Dimensionality reduction is often used to reduce the problem of managing and manipulating large data sets. Dimensionality reduction techniques generally use linear transformations in determining the intrinsic dimensionality of the manifold as well as extracting its principal directions. For this purpose there are various related techniques, including: principal component analysis, linear discriminant analysis, canonical correlation analysis, discrete cosine transform, random projection, etc. Random projection is a simple and computationally efficient way to reduce the dimensionality of data by trading a controlled amount of error for faster processing times and smaller model sizes. The dimensions and distribution of random projection matrices are controlled so as to approximately preserve the pairwise distances between any two samples of the dataset. == Method == The core idea behind random projection is given in the Johnson-Lindenstrauss lemma, which states that if points in a vector space are of sufficiently high dimension, then they may be projected into a suitable lower-dimensional space in a way which approximately preserves pairwise distances between the points with high probability. In random projection, the original d {\displaystyle d} -dimensional data is projected to a k {\displaystyle k} -dimensional subspace, by multiplying on the left by a random matrix R ∈ R k × d {\displaystyle R\in \mathbb {R} ^{k\times d}} . Using matrix notation: If X d × N {\displaystyle X_{d\times N}} is the original set of N d-dimensional observations, then X k × N R P = R k × d X d × N {\displaystyle X_{k\times N}^{RP}=R_{k\times d}X_{d\times N}} is the projection of the data onto a lower k-dimensional subspace. Random projection is computationally simple: form the random matrix "R" and project the d × N {\displaystyle d\times N} data matrix X onto K dimensions of order O ( d k N ) {\displaystyle O(dkN)} . If the data matrix X is sparse with about c nonzero entries per column, then the complexity of this operation is of order O ( c k N ) {\displaystyle O(ckN)} . === Orthogonal random projection === A unit vector can be orthogonally projected to a random subspace. Let u {\displaystyle u} be the original unit vector, and let v {\displaystyle v} be its projection. The norm-squared ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as projecting a random point, uniformly sampled on the unit sphere, to its first k {\displaystyle k} coordinates. This is equivalent to sampling a random point in the multivariate gaussian distribution x ∼ N ( 0 , I d × d ) {\displaystyle x\sim {\mathcal {N}}(0,I_{d\times d})} , then normalizing it. Therefore, ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as ∑ i = 1 k x i 2 ∑ i = 1 k x i 2 + ∑ i = k + 1 d x i 2 {\displaystyle {\frac {\sum _{i=1}^{k}x_{i}^{2}}{\sum _{i=1}^{k}x_{i}^{2}+\sum _{i=k+1}^{d}x_{i}^{2}}}} , which by the chi-squared construction of the Beta distribution, has distribution Beta ⁡ ( k / 2 , ( d − k ) / 2 ) {\displaystyle \operatorname {Beta} (k/2,(d-k)/2)} , with mean k / d {\displaystyle k/d} . We have a concentration inequality P r [ | ‖ v ‖ 2 − k d | ≥ ϵ k d ] ≤ 3 exp ⁡ ( − k ϵ 2 / 64 ) {\displaystyle Pr\left[\left|\|v\|_{2}-{\frac {k}{d}}\right|\geq \epsilon {\sqrt {\frac {k}{d}}}\right]\leq 3\exp \left(-k\epsilon ^{2}/64\right)} for any ϵ ∈ ( 0 , 1 ) {\displaystyle \epsilon \in (0,1)} . === Gaussian random projection === The random matrix R can be generated using a Gaussian distribution. The first row is a random unit vector uniformly chosen from S d − 1 {\displaystyle S^{d-1}} . The second row is a random unit vector from the space orthogonal to the first row, the third row is a random unit vector from the space orthogonal to the first two rows, and so on. In this way of choosing R, and the following properties are satisfied: Spherical symmetry: For any orthogonal matrix A ∈ O ( d ) {\displaystyle A\in O(d)} , RA and R have the same distribution. Orthogonality: The rows of R are orthogonal to each other. Normality: The rows of R are unit-length vectors. === More computationally efficient random projections === Achlioptas has shown that the random matrix can be sampled more efficiently. Either the full matrix can be sampled IID according to R i , j = 3 / k × { + 1 with probability 1 6 0 with probability 2 3 − 1 with probability 1 6 {\displaystyle R_{i,j}={\sqrt {3/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{6}}\\0&{\text{with probability }}{\frac {2}{3}}\\-1&{\text{with probability }}{\frac {1}{6}}\end{cases}}} or the full matrix can be sampled IID according to R i , j = 1 / k × { + 1 with probability 1 2 − 1 with probability 1 2 {\displaystyle R_{i,j}={\sqrt {1/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{2}}\\-1&{\text{with probability }}{\frac {1}{2}}\end{cases}}} Both are efficient for database applications because the computations can be performed using integer arithmetic. More related study is conducted in. It was later shown how to use integer arithmetic while making the distribution even sparser, having very few nonzeroes per column, in work on the Sparse JL Transform. This is advantageous since a sparse embedding matrix means being able to project the data to lower dimension even faster. === Random Projection with Quantization === Random projection can be further condensed by quantization (discretization), with 1-bit (sign random projection) or multi-bits. It is the building block of SimHash, RP tree, and other memory efficient estimation and learning methods. == Large quasiorthogonal bases == The Johnson-Lindenstrauss lemma states that large sets of vectors in a high-dimensional space can be linearly mapped in a space of much lower (but still high) dimension n with approximate preservation of distances. One of the explanations of this effect is the exponentially high quasiorthogonal dimension of n-dimensional Euclidean space. There are exponentially large (in dimension n) sets of almost orthogonal vectors (with small value of inner products) in n–dimensional Euclidean space. This observation is useful in indexing of high-dimensional data. Quasiorthogonality of large random sets is important for methods of random approximation in machine learning. In high dimensions, exponentially large numbers of randomly and independently chosen vectors from equidistribution on a sphere (and from many other distributions) are almost orthogonal with probability close to one. This implies that in order to represent an element of such a high-dimensional space by linear combinations of randomly and independently chosen vectors, it may often be necessary to generate samples of exponentially large length if we use bounded coefficients in linear combinations. On the other hand, if coefficients with arbitrarily large values are allowed, the number of randomly generated elements that are sufficient for approximation is even less than dimension of the data space. == Implementations == RandPro - An R package for random projection sklearn.random_projection - A module for random projection from the scikit-learn Python library Weka implementation [1]

  Read more →
• 

  SEMAT

  SEMAT (Software Engineering Method and Theory) is an initiative to reshape software engineering such that software engineering qualifies as a rigorous discipline. The initiative was launched in December 2009 by Ivar Jacobson, Bertrand Meyer, and Richard Soley with a call for action statement and a vision statement. The initiative was envisioned as a multi-year effort for bridging the gap between the developer community and the academic community and for creating a community giving value to the whole software community. The work is now structured in four different but strongly related areas: Practice, Education, Theory, and Community. The Practice area primarily addresses practices. The Education area is concerned with all issues related to training for both the developers and the academics including students. The Theory area is primarily addressing the search for a General Theory in Software Engineering. Finally, the Community area works with setting up legal entities, creating websites and community growth. It was expected that the Practice area, the Education area and the Theory area would at some point in time integrate in a way of value to all of them: the Practice area would be a "customer" of the Theory area, and direct the research to useful results for the developer community. The Theory area would give a solid and practical platform for the Practice area. And, the Education area would communicate the results in proper ways. == Practice area == The first step was here to develop a common ground or a kernel including the essence of software engineering – things we always have, always do, always produce when developing software. The second step was envisioned to add value on top of this kernel in the form of a library of practices to be composed to become specific methods, specific for all kinds of reasons such as the preferences of the team using it, kind of software being built, etc. The first step is as of this writing just about to be concluded. The results are a kernel including universal elements for software development – called the Essence Kernel, and a language – called the Essence Language - to describe these elements (and elements built on top of the kernel (practices, methods, and more). Essence, including both the kernel and language, has been published as an OMG standard in beta status in July 2013 and is expected to become a formally adopted standard in early 2014. The second step has just started, and the Practice area will be divided into a number of separate but interconnected tracks: the practice (library track), the tool track are so far identified and work has started or is about to get started. The practice track is currently working on a Users Guide. == Education area == The area focuses on leveraging the work of SEMAT in software engineering education, both within academia and industry. It promotes global education based on a common ground called Essence. The area's target groups are instructors such as university professors and industrial coaches as well as their students and learning practitioners. The goal of the area is to create educational courses and course materials that are internationally viable, identify pedagogical approaches that are appropriate and effective for specific target groups and disseminate experience and lessons learned. The area includes members from a number of universities and institutes worldwide. Most members have already been involved in leveraging aspects of SEMAT in the context of their software engineering courses. They are gathering their resources and starting a common venture towards defining a new generation of SEMAT-powered software engineering curricula. As of 2018, some studies of utilizing Essence in educational settings exist. One example of the use of Essence in university education was a software engineering course carried out in Norwegian University of Science and Technology. A study was conducted by introducing Essence into a project-based software engineering course, with the aim of understanding what difficulties the students faced in using Essence, and whether they considered it to have been useful. The results indicated that Essence could also be useful for novice software engineers by (1) encouraging them to look up and study new practices and methods in order to create their own, (2) encouraging them to adjust their way-of-working reflectively and in a situation-specific manner, (3) helping them structure their way of working. The findings of another study introducing students to Essence through a digital game supported these findings: the students felt that Essence will be useful to them in future, real-world projects, and that they wish to utilize it in them. == Theory area == An important part of SEMAT is that a general theory of software engineering is planned to emerge with significant benefits. A series of workshops held under the title SEMAT Workshop on a General Theory of Software Engineering (GTSE) are a key component in awareness building around general theories. In addition to community awareness building, SEMAT also aims to contribute with a specific general theory of software engineering. This theory should be solidly based on the SEMAT Essence language and kernel, and should support software engineering practitioners' goal-oriented decision making. As argued elsewhere, such support is predicated on the predictive capabilities of the theory. Thus, the SEMAT Essence should be augmented to allow the prediction of critical software engineering phenomena. The GTSE workshop series assists in the development of the SEMAT general software engineering theory by engaging a larger community in the search for, development of, and evaluation of promising theories, which may be used as a base for the SEMAT theory. == Organizational structure == === Main organization === SEMAT is chaired by Sumeet S. Malhotra of Tata Consultancy Services. The CEO of the organization is Ste Nadin of Fujitsu. The Executive Management Committee of SEMAT are Ivar Jacobson, Ste Nadin, Sumeet S. Malhotra, Paul E. McMahon, Michael Goedicke and Cecile Peraire. === Japan Chapter === Japan Chapter was established in April 2013, and it has more than 250 members as of November 2013. Member activities include carrying out seminars about SEMAT, considering utilization of SEMAT Essence for integrating different requirements engineering techniques and body of knowledges (BoKs), and translating articles into Japanese. === Korea Chapter === The chapter was inaugurated with about 50 members in October 2013. Member activities include: 2e Consulting started rewriting their IT service engagement methods using the Essence kernel, and uEngine Solutions started developing a tool to orchestrate Essence-kernel based practices into a project method. Korean government supported KAIST to conduct research in Essence. === Latin American Chapter === Semat Latin American Chapter was created in August 2011 in Medellin (Colombia) by Ivar Jacobson during the Latin American Software Engineering Symposium. This Chapter has 9 Executive Committee members from Colombia, Venezuela, Peru, Brazil, Argentina, Chile, and Mexico, chaired by Dr. Carlos Zapata from Colombia. More than 80 people signed the initial declaration of the Chapter and nowadays the Chapter members are in charge of disseminating the Semat ideas in all Latin America. Chapter members have participated in various Latin American conferences, including the Latin American Conference on Informatics (CLEI), the Ibero American Software Engineering and Knowledge Engineering Journeys (JIISIC), the Colombian Computing Conference (CCC), and the Chilean Computing Meeting (ECC). The Chapter contributed in the submission sent in response to the OMG call for proposals and currently studies didactic strategies for teaching the Semat kernel by games, theoretical studies about some kernel elements, and practical representations of several software development and quality methods by using the Semat kernel. Some of the members also translated the Essence book and some other Semat materials and papers into Spanish. === Russia Chapter === Russian Chapter has about 20 members. A few universities have incorporated SEMAT in their training courses , including Moscow State University, Moscow Institute of Physics and Technology, Higher School of Economics, Moscow State University of Economics, Statistics, and Informatics. The chapter and some commercial companies are carrying out seminars about SEMAT. INCOSE Russian Chapter is working on an extension of SEMAT to systems engineering. EC-leasing is working on an extension of the Kernel for Software Life Cycle. Russian Chapter attended in two conferences: Actual Problems of System and Software Engineering and SECR with SEMAT section and articles. Translation of the Essence book into Russian is in progress. == Practical Applications of SEMAT == Ideas developed by the SEMAT community have been applied by both industry and ac

  Read more →
• 

  Randomized weighted majority algorithm

  The randomized weighted majority algorithm is an algorithm in machine learning theory for aggregating expert predictions to a series of decision problems. It is a simple and effective method based on weighted voting which improves on the mistake bound of the deterministic weighted majority algorithm. In fact, in the limit, its prediction rate can be arbitrarily close to that of the best-predicting expert. == Example == Imagine that every morning before the stock market opens, we get a prediction from each of our "experts" about whether the stock market will go up or down. Our goal is to somehow combine this set of predictions into a single prediction that we then use to make a buy or sell decision for the day. The principal challenge is that we do not know which experts will give better or worse predictions. The RWMA gives us a way to do this combination such that our prediction record will be nearly as good as that of the single expert which, in hindsight, gave the most accurate predictions. == Motivation == In machine learning, the weighted majority algorithm (WMA) is a deterministic meta-learning algorithm for aggregating expert predictions. In pseudocode, the WMA is as follows: initialize all experts to weight 1 for each round: add each expert's weight to the option they predicted predict the option with the largest weighted sum multiply the weights of all experts who predicted wrongly by 1 2 {\displaystyle {\frac {1}{2}}} Suppose there are n {\displaystyle n} experts and the best expert makes m {\displaystyle m} mistakes. Then, the weighted majority algorithm (WMA) makes at most 2.4 ( log 2 ⁡ n + m ) {\displaystyle 2.4(\log _{2}n+m)} mistakes. This bound is highly problematic in the case of highly error-prone experts. Suppose, for example, the best expert makes a mistake 20% of the time; that is, in N = 100 {\displaystyle N=100} rounds using n = 10 {\displaystyle n=10} experts, the best expert makes m = 20 {\displaystyle m=20} mistakes. Then, the weighted majority algorithm only guarantees an upper bound of 2.4 ( log 2 ⁡ 10 + 20 ) ≈ 56 {\displaystyle 2.4(\log _{2}10+20)\approx 56} mistakes. As this is a known limitation of the weighted majority algorithm, various strategies have been explored in order to improve the dependence on m {\displaystyle m} . In particular, we can do better by introducing randomization. Drawing inspiration from the Multiplicative Weights Update Method algorithm, we will probabilistically make predictions based on how the experts have performed in the past. Similarly to the WMA, every time an expert makes a wrong prediction, we will decrement their weight. Mirroring the MWUM, we will then use the weights to make a probability distribution over the actions and draw our action from this distribution (instead of deterministically picking the majority vote as the WMA does). == Randomized weighted majority algorithm (RWMA) == The randomized weighted majority algorithm is an attempt to improve the dependence of the mistake bound of the WMA on m {\displaystyle m} . Instead of predicting based on majority vote, the weights, are used as probabilities for choosing the experts in each round and are updated over time (hence the name randomized weighted majority). Precisely, if w i {\displaystyle w_{i}} is the weight of expert i {\displaystyle i} , let W = ∑ i w i {\displaystyle W=\sum _{i}w_{i}} . We will follow expert i {\displaystyle i} with probability w i W {\displaystyle {\frac {w_{i}}{W}}} . This results in the following algorithm: initialize all experts to weight 1. for each round: add all experts' weights together to obtain the total weight W {\displaystyle W} choose expert i {\displaystyle i} randomly with probability w i W {\displaystyle {\frac {w_{i}}{W}}} predict as the chosen expert predicts multiply the weights of all experts who predicted wrongly by β {\displaystyle \beta } The goal is to bound the worst-case expected number of mistakes, assuming that the adversary has to select one of the answers as correct before we make our coin toss. This is a reasonable assumption in, for instance, the stock market example provided above: the variance of a stock price should not depend on the opinions of experts that influence private buy or sell decisions, so we can treat the price change as if it was decided before the experts gave their recommendations for the day. The randomized algorithm is better in the worst case than the deterministic algorithm (weighted majority algorithm): in the latter, the worst case was when the weights were split 50/50. But in the randomized version, since the weights are used as probabilities, there would still be a 50/50 chance of getting it right. In addition, generalizing to multiplying the weights of the incorrect experts by β < 1 {\displaystyle \beta <1} instead of strictly 1 2 {\displaystyle {\frac {1}{2}}} allows us to trade off between dependence on m {\displaystyle m} and log 2 ⁡ n {\displaystyle \log _{2}n} . This trade-off will be quantified in the analysis section. == Analysis == Let W t {\displaystyle W_{t}} denote the total weight of all experts at round t {\displaystyle t} . Also let F t {\displaystyle F_{t}} denote the fraction of weight placed on experts which predict the wrong answer at round t {\displaystyle t} . Finally, let N {\displaystyle N} be the total number of rounds in the process. By definition, F t {\displaystyle F_{t}} is the probability that the algorithm makes a mistake on round t {\displaystyle t} . It follows from the linearity of expectation that if M {\displaystyle M} denotes the total number of mistakes made during the entire process, E [ M ] = ∑ t = 1 N F t {\displaystyle E[M]=\sum _{t=1}^{N}F_{t}} . After round t {\displaystyle t} , the total weight is decreased by ( 1 − β ) F t W t {\displaystyle \ (1-\beta )F_{t}W_{t}} , since all weights corresponding to a wrong answer are multiplied by β < 1 {\displaystyle \ \beta <1} . It then follows that W t + 1 = W t ( 1 − ( 1 − β ) F t ) {\displaystyle W_{t+1}=W_{t}(1-(1-\beta )F_{t})} . By telescoping, since W 1 = n {\displaystyle W_{1}=n} , it follows that the total weight after the process concludes is On the other hand, suppose that m {\displaystyle \ m} is the number of mistakes made by the best-performing expert. At the end, this expert has weight β m {\displaystyle \ \beta ^{m}} . It follows, then, that the total weight is at least this much; in other words, W ≥ β m {\displaystyle \ W\geq \beta ^{m}} . This inequality and the above result imply Taking the natural logarithm of both sides yields Now, the Taylor series of the natural logarithm is In particular, it follows that ln ⁡ ( 1 − ( 1 − β ) F t ) < − ( 1 − β ) F t {\displaystyle \ \ln(1-(1-\beta )F_{t})<-(1-\beta )F_{t}} . Thus, Recalling that E [ M ] = ∑ t = 1 N F t {\displaystyle E[M]=\sum _{t=1}^{N}F_{t}} and rearranging, it follows that Now, as β → 1 {\displaystyle \beta \to 1} from below, the first constant tends to 1 {\displaystyle 1} ; however, the second constant tends to + ∞ {\displaystyle +\infty } . To quantify this tradeoff, define ε = 1 − β {\displaystyle \varepsilon =1-\beta } to be the penalty associated with getting a prediction wrong. Then, again applying the Taylor series of the natural logarithm, It then follows that the mistake bound, for small ε {\displaystyle \varepsilon } , can be written in the form ( 1 + ϵ 2 + O ( ε 2 ) ) m + ϵ − 1 ln ⁡ ( n ) {\displaystyle \ \left(1+{\frac {\epsilon }{2}}+O(\varepsilon ^{2})\right)m+\epsilon ^{-1}\ln(n)} . In English, the less that we penalize experts for their mistakes, the more that additional experts will lead to initial mistakes but the closer we get to capturing the predictive accuracy of the best expert as time goes on. In particular, given a sufficiently low value of ε {\displaystyle \varepsilon } and enough rounds, the randomized weighted majority algorithm can get arbitrarily close to the correct prediction rate of the best expert. In particular, as long as m {\displaystyle m} is sufficiently large compared to ln ⁡ ( n ) {\displaystyle \ln(n)} (so that their ratio is sufficiently small), we can assign we can obtain an upper bound on the number of mistakes equal to This implies that the "regret bound" on the algorithm (that is, how much worse it performs than the best expert) is sublinear, at O ( m ln ⁡ ( n ) ) {\displaystyle O({\sqrt {m\ln(n)}})} . == Revisiting the motivation == Recall that the motivation for the randomized weighted majority algorithm was given by an example where the best expert makes a mistake 20% of the time. Precisely, in N = 100 {\displaystyle N=100} rounds, with n = 10 {\displaystyle n=10} experts, where the best expert makes m = 20 {\displaystyle m=20} mistakes, the deterministic weighted majority algorithm only guarantees an upper bound of 2.4 ( log 2 ⁡ 10 + 20 ) ≈ 56 {\displaystyle 2.4(\log _{2}10+20)\approx 56} . By the analysis above, it follows that minimizing the number of worst-case expected mistakes is equivalent to minimizing the fun

  Read more →
• 

  Latent and observable variables

  In statistics, latent variables (from Latin: present participle of lateo 'lie hidden') are variables that can only be inferred indirectly through a mathematical model from other observable variables that can be directly observed or measured. Such latent variable models are used in many disciplines, including engineering, medicine, ecology, physics, machine learning/artificial intelligence, natural language processing, bioinformatics, chemometrics, demography, economics, management, political science, psychology and the social sciences. Latent variables may correspond to aspects of physical reality. These could in principle be measured, but may not be for practical reasons. Among the earliest expressions of this idea is Francis Bacon's polemic the Novum Organum, itself a challenge to the more traditional logic expressed in Aristotle's Organon: But the latent process of which we speak, is far from being obvious to men’s minds, beset as they now are. For we mean not the measures, symptoms, or degrees of any process which can be exhibited in the bodies themselves, but simply a continued process, which, for the most part, escapes the observation of the senses. In this situation, the term hidden variables is commonly used, reflecting the fact that the variables are meaningful, but not observable. Other latent variables correspond to abstract concepts, like categories, behavioral or mental states, or data structures. The terms hypothetical variables or hypothetical constructs may be used in these situations. The use of latent variables can serve to reduce the dimensionality of data. Many observable variables can be aggregated in a model to represent an underlying concept, making it easier to understand the data. In this sense, they serve a function similar to that of scientific theories. At the same time, latent variables link observable "sub-symbolic" data in the real world to symbolic data in the modeled world. == Examples == === Psychology === Latent variables, as created by factor analytic methods, generally represent "shared" variance, or the degree to which variables "move" together. Variables that have no correlation cannot result in a latent construct based on the common factor model. The "Big Five personality traits" have been inferred using factor analysis. extraversion spatial ability wisdom: “Two of the more predominant means of assessing wisdom include wisdom-related performance and latent variable measures.” Spearman's g, or the general intelligence factor in psychometrics === Economics === Examples of latent variables from the field of economics include quality of life, business confidence, morale, happiness and conservatism: these are all variables which cannot be measured directly. However, by linking these latent variables to other, observable variables, the values of the latent variables can be inferred from measurements of the observable variables. Quality of life is a latent variable which cannot be measured directly, so observable variables are used to infer quality of life. Observable variables to measure quality of life include wealth, employment, environment, physical and mental health, education, recreation and leisure time, and social belonging. === Medicine === Latent-variable methodology is used in many branches of medicine. A class of problems that naturally lend themselves to latent variables approaches are longitudinal studies where the time scale (e.g. age of participant or time since study baseline) is not synchronized with the trait being studied. For such studies, an unobserved time scale that is synchronized with the trait being studied can be modeled as a transformation of the observed time scale using latent variables. Examples of this include disease progression modeling and modeling of growth (see box). == Inferring latent variables == There exists a range of different model classes and methodology that make use of latent variables and allow inference in the presence of latent variables. Models include: linear mixed-effects models and nonlinear mixed-effects models Hidden Markov models Factor analysis Item response theory Analysis and inference methods include: Principal component analysis Instrumented principal component analysis Partial least squares regression Latent semantic analysis and probabilistic latent semantic analysis EM algorithms Metropolis–Hastings algorithm === Bayesian algorithms and methods === Bayesian statistics is often used for inferring latent variables. Latent Dirichlet allocation The Chinese restaurant process is often used to provide a prior distribution over assignments of objects to latent categories. The Indian buffet process is often used to provide a prior distribution over assignments of latent binary features to objects.

  Read more →