AI Chat Free No Limit

AI Chat Free No Limit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Smoothing

  In statistics and image processing, to smooth a data set is to create an approximating function that attempts to capture important patterns in the data, while leaving out noise or other fine-scale structures/rapid phenomena. In smoothing, the data points of a signal are modified so individual points higher than the adjacent points (presumably because of noise) are reduced, and points that are lower than the adjacent points are increased, leading to a smoother signal. Reducing noise by smoothing may aid in data analysis in two notable ways: Help uncover more meaningful information from the underlying data, such as trends. Provide analyses that are both flexible and robust. Many different algorithms are used in smoothing, most commonly binning, kernels, and local weighted regression. == Compared to curve fitting == Smoothing may be distinguished from the related and partially overlapping concept of curve fitting in the following ways: curve fitting often involves the use of an explicit function form for the result, whereas the immediate results from smoothing are the "smoothed" values with no later use made of a functional form if there is one; the aim of smoothing is to give a general idea of relatively slow changes of value with little attention paid to the close matching of data values, while curve fitting concentrates on achieving as close a match as possible. smoothing methods often have an associated tuning parameter which is used to control the extent of smoothing. Curve fitting will adjust any number of parameters of the function to obtain the 'best' fit. == Linear smoothers == In the case that the smoothed values can be written as a linear transformation of the observed values, the smoothing operation is known as a linear smoother; the matrix representing the transformation is known as a smoother matrix or hat matrix. The operation of applying such a matrix transformation is called convolution. Thus the matrix is also called convolution matrix or a convolution kernel. In the case of simple series of data points (rather than a multi-dimensional image), the convolution kernel is a one-dimensional vector. == Algorithms == One of the most common algorithms is the "moving average", often used to try to capture important trends in repeated statistical surveys. In image processing and computer vision, smoothing ideas are used in scale space representations. The simplest smoothing algorithm is the "rectangular" or "unweighted sliding-average smooth". This method replaces each point in the signal with the average of "m" adjacent points, where "m" is a positive integer called the "smooth width". Usually m is an odd number. The triangular smooth is like the rectangular smooth except that it implements a weighted smoothing function. Some specific smoothing and filter types, with their respective uses, pros and cons are:

  Read more →
• 

  Graphics

  Graphics (from Ancient Greek γραφικός (graphikós) 'pertaining to drawing, painting, writing, etc.') are visual images or designs on some surface, such as a wall, canvas, screen, paper, or stone, to inform, illustrate, or entertain. In contemporary usage, it includes a pictorial representation of data, as in design and manufacture, in typesetting and the graphic arts, and in educational and recreational software. Images that are generated by a computer are called computer graphics. Examples are photographs, drawings, line art, mathematical graphs, line graphs, charts, diagrams, typography, numbers, symbols, geometric designs, maps, engineering drawings, or other images. Graphics often combine text, illustration, and color. Graphic design may consist of the deliberate selection, creation, or arrangement of typography alone, as in a brochure, flyer, poster, web site, or book without any other element. The objective can be clarity or effective communication, association with other cultural elements, or merely the creation of a distinctive style. Graphics can be functional or artistic. The latter can be a recorded version, such as a photograph, or an interpretation by a scientist to highlight essential features, or an artist, in which case the distinction with imaginary graphics may become blurred. It can also be used for architecture. == History == The earliest graphics known to anthropologists studying prehistoric periods are cave paintings and markings on boulders, bone, ivory, and antlers, which were created during the Upper Palaeolithic period from 40,000 to 10,000 B.C. or earlier. Many of these were found to record astronomical, seasonal, and chronological details. Some of the earliest graphics and drawings are known to the modern world, from almost 6,000 years ago, are that of engraved stone tablets and ceramic cylinder seals, marking the beginning of the historical periods and the keeping of records for accounting and inventory purposes. Records from Egypt predate these and papyrus was used by the Egyptians as a material on which to plan the building of pyramids; they also used slabs of limestone and wood. From 600 to 250 BC, the Greeks played a major role in geometry. They used graphics to represent their mathematical theories such as the Circle Theorem and the Pythagorean theorem. In art, "graphics" is often used to distinguish work in a monotone and made up of lines, as opposed to painting. === Drawing === Drawing generally involves making marks on a surface by applying pressure from a tool or moving a tool across a surface. In which a tool is always used as if there were no tools it would be art. Graphical drawing is an instrumental guided drawing. === Printmaking === Woodblock printing, including images is first seen in China after paper was invented (about A.D. 105). In the West, the main techniques have been woodcut, engraving and etching, but there are many others. ==== Etching ==== Etching is an intaglio method of printmaking in which the image is incised into the surface of a metal plate using an acid. The acid eats the metal, leaving behind roughened areas, or, if the surface exposed to the acid is very thin, burning a line into the plate. The use of the process in printmaking is believed to have been invented by Daniel Hopfer (c. 1470–1536) of Augsburg, Germany, who decorated armour in this way. Etching is also used in the manufacturing of printed circuit boards and semiconductor devices. === Line art === Line art is a rather non-specific term sometimes used for any image that consists of distinct straight and curved lines placed against a (usually plain) background, without gradations in shade (darkness) or hue (color) to represent two-dimensional or three-dimensional objects. Line art is usually monochromatic, although lines may be of different colors. === Illustration === An illustration is a visual representation such as a drawing, painting, photograph or other work of art that stresses the subject more than form. The aim of an illustration is to elucidate or decorate a story, poem or piece of textual information (such as a newspaper article), traditionally by providing a visual representation of something described in the text. The editorial cartoon, also known as a political cartoon, is an illustration containing a political or social message. Illustrations can be used to display a wide range of subject matter and serve a variety of functions, such as: giving faces to characters in a story displaying a number of examples of an item described in an academic textbook (e.g. A Typology) visualizing step-wise sets of instructions in a technical manual communicating subtle thematic tone in a narrative linking brands to the ideas of human expression, individuality, and creativity making a reader laugh or smile for fun (to make laugh) funny === Graphs === A graph or chart is a graphic that represents tabular or numeric data. Charts are often used to make it easier to understand large quantities of data and the relationships between different parts of the data. === Diagrams === A diagram is a simplified and structured visual representation of concepts, ideas, constructions, relations, statistical data, etc., used to visualize and clarify the topic. === Symbols === A symbol, in its basic sense, is a representation of a concept or quantity; i.e., an idea, object, concept, quality, etc. In more psychological and philosophical terms, all concepts are symbolic in nature, and representations for these concepts are simply token artifacts that are allegorical to (but do not directly codify) a symbolic meaning, or symbolism. === Maps === A map is a simplified depiction of a space, a navigational aid which highlights relations between objects within that space. Usually, a map is a two-dimensional, geometrically accurate representation of a three-dimensional space. One of the first 'modern' maps was made by Waldseemüller. === Photography === One difference between photography and other forms of graphics is that a photographer, in principle, just records a single moment in reality, with seemingly no interpretation. However, a photographer can choose the field of view and angle, and may also use other techniques, such as various lenses to choose the view or filters to change the colors. In recent times, digital photography has opened the way to an infinite number of fast, but strong, manipulations. Even in the early days of photography, there was controversy over photographs of enacted scenes that were presented as 'real life' (especially in war photography, where it can be very difficult to record the original events). Shifting the viewer's eyes ever so slightly with simple pinpricks in the negative could have a dramatic effect. The choice of the field of view can have a strong effect, effectively 'censoring out' other parts of the scene, accomplished by cropping them out or simply not including them in the photograph. This even touches on the philosophical question of what reality is. The human brain processes information based on previous experience, making us see what we want to see or what we were taught to see. Photography does the same, although the photographer interprets the scene for their viewer. === Engineering drawings === An engineering drawing is a type of drawing and is technical in nature, used to fully and clearly define requirements for engineered items. It is usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance (such as typefaces and line styles), size, etc. === Computer graphics === There are two types of computer graphics: raster graphics, where each pixel is separately defined (as in a digital photograph), and vector graphics, where mathematical formulas are used to draw lines and shapes, which are then interpreted at the viewer's end to produce the graphic. Using vectors results in infinitely sharp graphics and often smaller files, but, when complex, like vectors take time to render and may have larger file sizes than a raster equivalent. In 1950, the first computer-driven display was attached to MIT's Whirlwind I computer to generate simple pictures. This was followed by MIT's TX-0 and TX-2, interactive computing which increased interest in computer graphics during the late 1950s. In 1962, Ivan Sutherland invented Sketchpad, an innovative program that influenced alternative forms of interaction with computers. In the mid-1960s, large computer graphics research projects were begun at MIT, General Motors, Bell Labs, and Lockheed Corporation. Douglas T. Ross of MIT developed an advanced compiler language for graphics programming. S.A.Coons, also at MIT, and J. C. Ferguson at Boeing, began work in sculptured surfaces. GM developed their DAC-1 system, and other companies, such as Douglas, Lockheed, and McDonnell, also made significant developments. In 1968, ray tracing was first described by Arthur Appel of the IBM Research Center, Yorktown Heights, N

  Read more →
• 

  Commission on Enhancing National Cybersecurity

  The President's Commission on Enhancing National Cybersecurity is a Presidential Commission formed on April 13, 2016, to develop a plan for protecting cyberspace, and America's economic reliance on it. The commission released its final report in December 2016. The report made recommendations regarding the intertwining roles of the military, government administration and the private sector in providing cyber security. Chairman Donilon said of the report that its coverage "is unusual in the breadth of issues" with which it deals. == Recommendations == The report made sixteen major recommendations with fifty-three specific action items broadly grouped under six areas: Protecting the information and digital infrastructure Investing in the secure growth of information and digital infrastructure Consumer information access Building the cybersecurity workforce Building a secure governmental cybersecurity framework Keeping interconnectivity open, fair, competitive, and secure The Commission found that strong authentication systems were mandatory for adequate cybersecurity, not just for the government, but for all commercial systems, and private individuals. The commission also stressed remote identity proofing and security for the Internet of things (IoT). Finding that technicians who know cybersecurity and can protect systems are few and in short supply, the commission recommended nationally supported training programs to produce an adequate workforce, as well as increasing the level of expertise in the existing workforce. The Commission highlighted the importance of partnerships between government and the private sector as a powerful tool for encouraging the technology, policies and practices we need to secure and grow the digital economy. (page 2) Some criticised the commission's work as lacking an understanding of cybersecurity and not being cognizant of "cyber reality" and the cost of some of the action items, but others found the report constructive and meaningful. == Commission members == The initial members of the Commission are: Tom Donilon, former Assistant to the President and National Security Advisor (Chair) Sam Palmisano, former CEO of IBM (Vice Chair) General Keith Alexander, CEO of IronNet Cybersecurity, former Director of the National Security Agency and former Commander of U.S. Cyber Command Annie Antón, Professor and Chair of the School of Interactive Computing at Georgia Tech. Ajay Banga, President and CEO of MasterCard Steven Chabinsky, General Counsel and Chief Risk Officer of CrowdStrike Patrick Gallagher, Chancellor of the University of Pittsburgh and former Director of the National Institute of Standards and Technology Peter Lee, Corporate Vice President, Microsoft Research Herbert Lin, Senior Research Scholar for Cyber Policy and Security at the Stanford Center for International Security and Cooperation and Research Fellow at the Hoover Institution Heather Murren, former member of the Financial Crisis Inquiry Commission and co-founder of the Nevada Cancer Institute Joe Sullivan, Chief Security Officer of Uber and former Chief Security Officer of Facebook Maggie Wilderotter, Executive Chairman of Frontier Communications == Follow-on == Incoming President Trump has indicated that he wants a full review of U.S. cyber protection policy. == Notes and references ==

  Read more →
• 

  Hexagonal sampling

  A multidimensional signal is a function of M independent variables where M ≥ 2 {\displaystyle M\geq 2} . Real world signals, which are generally continuous time signals, have to be discretized (sampled) in order to ensure that digital systems can be used to process the signals. It is during this process of discretization where sampling comes into picture. Although there are many ways of obtaining a discrete representation of a continuous time signal, periodic sampling is by far the simplest scheme. Theoretically, sampling can be performed with respect to any set of points. But practically, sampling is carried out with respect to a set of points that have a certain algebraic structure. Such structures are called lattices. Mathematically, the process of sampling an N {\displaystyle N} -dimensional signal can be written as: w ( t ^ ) = w ( V . n ^ ) {\displaystyle w({\hat {t}})=w(V.{\hat {n}})} where t ^ {\displaystyle {\hat {t}}} is continuous domain M-dimensional vector (M-D) that is being sampled, n ^ {\displaystyle {\hat {n}}} is an M-dimensional integer vector corresponding to indices of a sample, and V is an N × N {\displaystyle N\times N} sampling matrix. == Motivation == Multidimensional sampling provides the opportunity to look at digital methods to process signals. Some of the advantages of processing signals in the digital domain include flexibility via programmable DSP operations, signal storage without the loss of fidelity, opportunity for encryption in communication, lower sensitivity to hardware tolerances. Thus, digital methods are simultaneously both powerful and flexible. In many applications, they act as less expensive alternatives to their analog counterparts. Sometimes, the algorithms implemented using digital hardware are so complex that they have no analog counterparts. Multidimensional digital signal processing deals with processing signals represented as multidimensional arrays such as 2-D sequences or sampled images.[1] Processing these signals in the digital domain permits the use of digital hardware where in signal processing operations are specified by algorithms. As real world signals are continuous time signals, multidimensional sampling plays a crucial role in discretizing the real world signals. The discrete time signals are in turn processed using digital hardware to extract information from the signal. == Preliminaries == === Region of Support === The region outside of which the samples of the signal take zero values is known as the Region of support (ROS). From the definition, it is clear that the region of support of a signal is not unique. === Fourier transform === The Fourier transform is a tool that allows us to simplify mathematical operations performed on the signal. The transform basically represents any signal as a weighted combination of sinusoids. The Fourier and the inverse Fourier transform of an M-dimensional signal can be defined as follows: X a ( Ω ^ ) = ∫ − ∞ + ∞ x a ( t ^ ) e − j Ω ^ T t ^ d t ^ {\displaystyle X_{a}({\hat {\Omega }})=\int _{-\infty }^{+\infty }\!x_{a}({\hat {t}})e^{-j{\hat {\Omega }}^{T}{\hat {t}}}d{\hat {t}}} x a ( t ^ ) = 1 2 π M ∫ − ∞ + ∞ X ( Ω ^ ) e ( j Ω ^ T t ^ ) d Ω ^ {\displaystyle x_{a}({\hat {t}})={\frac {1}{2\pi ^{M}}}\int _{-\infty }^{+\infty }\!X({\hat {\Omega }})e^{(j{\hat {\Omega }}^{T}{\hat {t}})}\,\mathrm {d} {\hat {\Omega }}} The cap symbol ^ indicates that the operation is performed on vectors. The Fourier transform of the sampled signal is observed to be a periodic extension of the continuous time Fourier transform of the signal. This is mathematically represented as: X ( ω ) = 1 | d e t ( V ) | ∑ k X a ( Ω ^ − U k ) {\displaystyle X(\omega )={\frac {1}{|det(V)|}}\sum _{k}\!X_{a}({\hat {\Omega }}-Uk)} where ω = V ~ Ω {\displaystyle \omega ={\tilde {V}}\Omega } and U = 2 π V ~ {\displaystyle U=2\pi {\tilde {V}}} is the periodicity matrix where ~ denotes matrix transposition. Thus sampling in the spatial domain results in periodicity in the Fourier domain. === Aliasing === A band limited signal may be periodically replicated in many ways. If the replication results in an overlap between replicated regions, the signal suffers from aliasing. Under such conditions, a continuous time signal cannot be perfectly recovered from its samples. Thus in order to ensure perfect recovery of the continuous signal, there must be zero overlap multidimensional sampling of the replicated regions in the transformed domain. As in the case of 1-dimensional signals, aliasing can be prevented if the continuous time signal is sampled at an adequate sufficiently high rate. === Sampling density === It is a measure of the number of samples per unit area. It is defined as: S . D = 1 | d e t ( V ) | = | d e t ( U ) | 4 π 2 {\displaystyle S.D={\frac {1}{|det(V)|}}={\frac {|det(U)|}{4\pi ^{2}}}} . The minimum number of samples per unit area required to completely recover the continuous time signal is termed as optimal sampling density. In applications where memory or processing time are limited, emphasis must be given to minimizing the number of samples required to represent the signal completely. == Existing approaches == For a bandlimited waveform, there are infinitely many ways the signal can be sampled without producing aliases in the Fourier domain. But only two strategies are commonly used: rectangular sampling and hexagonal sampling. === Rectangular and Hexagonal sampling === In rectangular sampling, a 2-dimensional signal, for example, is sampled according to the following V matrix: V r e c t = [ T 1 0 0 T 2 ] {\displaystyle V_{rect}={\begin{bmatrix}T1&0\\0&T2\end{bmatrix}}} where T1 and T2 are the sampling periods along the horizontal and vertical direction respectively. In hexagonal sampling, the V matrix assumes the following general form: V h e x = [ T 1 T 1 − T 2 T 2 ] {\displaystyle V_{hex}={\begin{bmatrix}T1&T1\\-T2&T2\end{bmatrix}}} The difference in the efficiency of the two schemes is highlighted using a bandlimited signal with a circular region of support of radius R. The circle can be inscribed in a square of length 2R or a regular hexagon of length 2 R 3 {\displaystyle {\frac {2R}{\sqrt {3}}}} . Consequently, the region of support is now transformed into a square and a hexagon respectively. If these regions are periodically replicated in the frequency domain such that there is zero overlap between any two regions, then by periodically replicating the square region of support, we effectively sample the continuous signal on a rectangular lattice. Similarly periodic replication of the hexagonal region of support maps to sampling the continuous signal on a hexagonal lattice. From U, the periodicity matrix, we can calculate the optimal sampling density for both the rectangular and hexagonal schemes. It is found that in order to completely recover the circularly band-limited signal, the hexagonal sampling scheme requires 13.4% fewer samples than the rectangular sampling scheme. The reduction may appear to be of little significance for a 2-dimensional signal. But as the dimensionality of the signal increases, the efficiency of the hexagonal sampling scheme will become far more evident. For instance, the reduction achieved for an 8-dimensional signal is 93.8%. To highlight the importance of the obtained result [2], try and visualize an image as a collection of infinite number of samples. The primary entity responsible for vision, i.e. the photoreceptors (rods and cones) are present on the retina of all mammals. These cells are not arranged in rows and columns. By adapting a hexagonal sampling scheme, our eyes are able to process images much more efficiently. The importance of hexagonal sampling lies in the fact that the photoreceptors of the human vision system lie on a hexagonal sampling lattice and, thus, perform hexagonal sampling.[3] In fact, it can be shown that the hexagonal sampling scheme is the optimal sampling scheme for a circularly band-limited signal. == Applications == === Aliasing effects minimized by the use of optimal sampling grids === Recent advances in the CCD technology has made hexagonal sampling feasible for real life applications. Historically, because of technology constraints, detector arrays were implemented only on 2-dimensional rectangular sampling lattices with rectangular shape detectors. But the super [CCD] detector introduced by Fuji has an octagonal shaped pixel in a hexagonal grid. Theoretically, the performance of the detector was greatly increased by introducing an octagonal pixel. The number of pixels required to represent the sample was reduced and there was significant improvement in the Signal-to-Noise Ratio (SNR) when compared with that of a rectangular pixel. But the drawback of using hexagonal pixels is that the associated fill factor will be less than 82%. An alternative method would be to interpolate hexagonal pixels in such a manner that we ultimately end up with a rectangular grid. The Spot 5 satellite incorporates a

  Read more →
• 

  Sequence labeling

  In machine learning, sequence labeling is a type of pattern recognition task that involves the algorithmic assignment of a categorical label to each member of a sequence of observed values. A common example of a sequence labeling task is part of speech tagging, which seeks to assign a part of speech to each word in an input sentence or document. Sequence labeling can be treated as a set of independent classification tasks, one per member of the sequence. However, accuracy is generally improved by making the optimal label for a given element dependent on the choices of nearby elements, using special algorithms to choose the globally best set of labels for the entire sequence at once. As an example of why finding the globally best label sequence might produce better results than labeling one item at a time, consider the part-of-speech tagging task just described. Frequently, many words are members of multiple parts of speech, and the correct label of such a word can often be deduced from the correct label of the word to the immediate left or right. For example, the word "sets" can be either a noun or verb. In a phrase like "he sets the books down", the word "he" is unambiguously a pronoun, and "the" unambiguously a determiner, and using either of these labels, "sets" can be deduced to be a verb, since nouns very rarely follow pronouns and are less likely to precede determiners than verbs are. But in other cases, only one of the adjacent words is similarly helpful. In "he sets and then knocks over the table", only the word "he" to the left is helpful (cf. "...picks up the sets and then knocks over..."). Conversely, in "... and also sets the table" only the word "the" to the right is helpful (cf. "... and also sets of books were ..."). An algorithm that proceeds from left to right, labeling one word at a time, can only use the tags of left-adjacent words and might fail in the second example above; vice versa for an algorithm that proceeds from right to left. Most sequence labeling algorithms are probabilistic in nature, relying on statistical inference to find the best sequence. The most common statistical models in use for sequence labeling make a Markov assumption, i.e. that the choice of label for a particular word is directly dependent only on the immediately adjacent labels; hence the set of labels forms a Markov chain. This leads naturally to the hidden Markov model (HMM), one of the most common statistical models used for sequence labeling. Other common models in use are the maximum entropy Markov model and conditional random field.

  Read more →
• 

  Molecular graphics

  Molecular graphics is the discipline and philosophy of studying molecules and their properties through graphical representation. IUPAC limits the definition to representations on a "graphical display device". Ever since Dalton's atoms and Kekulé's benzene, there has been a rich history of hand-drawn atoms and molecules, and these representations have had an important influence on modern molecular graphics. Colour molecular graphics are often used on chemistry journal covers artistically. == History == Prior to the use of computer graphics in representing molecular structure, Robert Corey and Linus Pauling developed a system for representing atoms or groups of atoms from hard wood on a scale of 1 inch = 1 angstrom connected by a clamping device to maintain the molecular configuration. These early models also established the CPK coloring scheme that is still used today to differentiate the different types of atoms in molecular models (e.g. carbon = black, oxygen = red, nitrogen = blue, etc). This early model was improved upon in 1966 by W.L. Koltun and are now known as Corey-Pauling-Koltun (CPK) models. The earliest efforts to produce models of molecular structure was done by Project MAC using wire-frame models displayed on a cathode ray tube in the mid 1960s. In 1965, Carroll Johnson distributed the Oak Ridge thermal ellipsoid plot (ORTEP) that visualized molecules as a ball-and-stick model with lines representing the bonds between atoms and ellipsoids to represent the probability of thermal motion. Thermal ellipsoid plots quickly became the de facto standard used in the display of X-ray crystallography data, and are still in wide use today. The first practical use of molecular graphics was a simple display of the protein myoglobin using a wireframe representation in 1966 by Cyrus Levinthal and Robert Langridge working at Project MAC. Among the milestones in high-performance molecular graphics was the work of Nelson Max in "realistic" rendering of macromolecules using reflecting spheres. Initially much of the technology concentrated on high-performance 3D graphics. During the 1970s, methods for displaying 3D graphics using cathode ray tubes were developed using continuous tone computer graphics in combination with electro-optic shutter viewing devices. The first devices used an active shutter 3D system, generating different perspective views for the left and right channel to provide the illusion of three-dimensional viewing. Stereoscopic viewing glasses were designed using lead lanthanum zirconate titanate (PLZT) ceramics as electronically controlled shutter elements. Active 3D glasses require batteries and work in concert with the display to actively change the presentation by the lenses to the wearer's eyes. Many modern 3D glasses use a passive, polarized 3D system that enables the wearer to visualize 3D effects based on their own perception. Passive 3D glasses are more common today since they are less expensive. The requirements of macromolecular crystallography also drove molecular graphics because the traditional techniques of physical model-building could not scale. The first two protein structures solved by molecular graphics without the aid of the Richards' Box were built with Stan Swanson's program FIT on the Vector General graphics display in the laboratory of Edgar Meyer at Texas A&M University: First Marge Legg in Al Cotton's lab at A&M solved a second, higher-resolution structure of staph. nuclease (1975) and then Jim Hogle solved the structure of monoclinic lysozyme in 1976. A full year passed before other graphics systems were used to replace the Richards' Box for modelling into density in 3-D. Alwyn Jones' FRODO program (and later "O") were developed to overlay the molecular electron density determined from X-ray crystallography and the hypothetical molecular structure. === Timeline === == Types == === Ball-and-stick models === In the ball-and-stick model, atoms are drawn as small sphered connected by rods representing the chemical bonds between them. === Space-filling models === In the space-filling model, atoms are drawn as solid spheres to suggest the space they occupy, in proportion to their van der Waals radii. Atoms that share a bond overlap with each other. === Surfaces === In some models, the surface of the molecule is approximated and shaded to represent a physical property of the molecule, such as electronic charge density. === Ribbon diagrams === Ribbon diagrams are schematic representations of protein structure and are one of the most common methods of protein depiction used today. The ribbon shows the overall path and organization of the protein backbone in 3D, and serves as a visual framework on which to hang details of the full atomic structure, such as the balls for the oxygen atoms bound to the active site of myoglobin in the adjacent image. Ribbon diagrams are generated by interpolating a smooth curve through the polypeptide backbone. α-helices are shown as coiled ribbons or thick tubes, β-strands as arrows, and non-repetitive coils or loops as lines or thin tubes. The direction of the polypeptide chain is shown locally by the arrows, and may be indicated overall by a colour ramp along the length of the ribbon.

  Read more →
• 

  Spotify Live

  Spotify Live, formerly Spotify Greenroom, was a social audio app by Spotify, that allowed users to host or participate in live-audio virtual environments called "room" for conversations. Each room had a maximum capacity of 1000 people. The app was available on Android and iOS, competing with Twitter Spaces and Clubhouse in the social media segment. It was shut down on April 30, 2023. == History == In October 2020, Betty Labs released Locker Room exclusively on the iOS App Store. The app featured virtual audio chat rooms for sports enthusiasts. In late March 2021, Spotify acquired Betty Labs for $50 million and announced plans to rebrand the app with a broader focus on sports, music, and pop culture. On June 16, 2021, Spotify launched the app as Spotify Greenroom on Android (early access) and iOS, expanding its scope beyond just sports. At launch, Spotify introduced the Greenroom Creator Fund to support creators and shows, serving as a rival to Clubhouse's Creator First Accelerator Program. The fund aimed to provide a monetization path for podcasters integrating Greenroom into their verified Spotify accounts. By July 2021, the app had accumulated over 140,000 iOS installs and 100,000 Android installs. In August 2021, Spotify collaborated with the WWE to produce professional wrestling-related podcasts, many of which would be recorded by The Ringer, Spotify's in-house podcasting team, using Greenroom. In March 2022, Spotify Greenroom announced its rebranding as Spotify Live and its migration to the main Spotify app. After a year, Spotify announced it would shut down the Spotify Live app at the end of April 2023. == Features == Greenroom allowed users to create or join a room, which, in the context of the application, was a virtual space for real-time voice chats. Users could only create a room within a pre-defined group, representing either a brand or a generic category. If a user chose to create a room, they became the host, with the ability to invite people, control who could talk, and enable features like recording and the Discussions tab during room creation. Enabling recording displayed a disclaimer informing users that the conversation was being recorded, and the audio, recorded in mp4 format, would be sent to the host via email after the room concluded. If the Discussions tab was enabled, users could send text messages in the public chat section. The host also had the authority to ban users if necessary. When joining a room, a user could opt to be a listener or request to become a speaker. Users had the freedom to follow or block others and join groups at their discretion. Notifications about new rooms in joined groups would be sent to users. Additionally, users could discover new individuals and groups using the search tab. == Partnered creators == By October 2021, Spotify had a variety of partnered creators aimed at boosting traffic and validating its vertically integrated podcast model. These creators primarily focused on Generation Z. In-house Spotify talent, such as The Ringer, produced sports-related content. Simultaneously, the company recruited creators from various social channels to grow Greenroom's audience while also promoting its integration with Spotify and Anchor. Each verified Spotify partner had their Greenroom shows featured in both the Greenroom app and their profiles on the Spotify app. This was part of the company's strategy leading into the 2022 ramp-up to compete with Clubhouse. == Platforms == The app was accessible on both Android and iOS platforms, and users could download the app from their respective app stores. Android users needed Android 8 or above to launch the app, while iOS consumers required iOS 13 or later to run it.

  Read more →
• 

  Data commingling

  Data commingling, in computer science, occurs when different items or kinds of data are stored in such a way that they become commonly accessible when they are supposed to remain separated. In cloud computing, this can occur where different customer data sits on the same server. Data that is commingled can present a security vulnerability. Data commingling can also occur due to high speed data transmission mixing. In this situation, data of one security level can inadvertently or purposely be mixed with data of a lower or higher security level on the same transmission portal. Portal vehicles can be wire, fiber optics, microwave or various radio frequency transmission portals. This commingling can cause breaches of security and become a source of legal issues to any entity, corporation or individual. Data commingling can also occur when personal computers and personal software programs are used for business, security, government, etc. uses. In the early formulation stages of entities, non-profit or profit corporations, LLC's, LLP's, etc., the creation and use of stand-alone computers and stand-alone networks, "absolutely unconnected" to involved individuals, is the easiest, and safest way to prevent Data Commingling.

  Read more →
• 

  Maximum inner-product search

  Maximum inner-product search (MIPS) is a search problem, with a corresponding class of search algorithms which attempt to maximise the inner product between a query and the data items to be retrieved. MIPS algorithms are used in a wide variety of big data applications, including recommendation algorithms and machine learning. Formally, for a database of vectors x i {\displaystyle x_{i}} defined over a set of labels S {\displaystyle S} in an inner product space with an inner product ⟨ ⋅ , ⋅ ⟩ {\displaystyle \langle \cdot ,\cdot \rangle } defined on it, MIPS search can be defined as the problem of determining a r g m a x i ∈ S ⟨ x i , q ⟩ {\displaystyle {\underset {i\in S}{\operatorname {arg\,max} }}\ \langle x_{i},q\rangle } for a given query q {\displaystyle q} . Although there is an obvious linear-time implementation, it is generally too slow to be used on practical problems. However, efficient algorithms exist to speed up MIPS search. Under the assumption of all vectors in the set having constant norm, MIPS can be viewed as equivalent to a nearest neighbor search (NNS) problem in which maximizing the inner product is equivalent to minimizing the corresponding distance metric in the NNS problem. Like other forms of NNS, MIPS algorithms may be approximate or exact. MIPS search is used as part of DeepMind's RETRO algorithm.

  Read more →
• 

  Generatrix

  In geometry, a generatrix () or describent is a point, curve or surface that, when moved along a given path, generates a new shape. The path directing the motion of the generatrix motion is called a directrix or dirigent. == Examples == A cone can be generated by moving a line (the generatrix) fixed at the future apex of the cone along a closed curve (the directrix); if that directrix is a circle perpendicular to the line connecting its center to the apex, the motion is rotation around a fixed axis and the resulting shape is a circular cone. The generatrix of a cylinder, a limiting case of a cone, is a line that is kept parallel to some axis.

  Read more →
• 

  Shape table

  Shape tables are a feature of the Apple II ROMs which allows for manipulation of small images encoded as a series of vectors. An image (or shape) can be drawn in the high-resolution graphics mode—with scaling and rotation—via software routines in the ROM. Shape tables are supported via Applesoft BASIC and from machine code in the "Programmer's Aid" package that was bundled with the original Integer BASIC ROMs for that computer. Applesoft's high-resolution graphics routines were not optimized for speed, so shape tables were not typically used for performance-critical software such as games, which were typically written in assembly language and used pre-shifted bitmap shapes. Shape tables were used primarily for static shapes and sometimes for fancy text; Beagle Bros offered a number of fonts in Font Mechanic as Applesoft shape tables. == Technical details == The vectors of a two-dimensional graphic, each encoding a direction from the previous pixel along with a flag indicating whether the new pixel should be illuminated or not, were encoded up to three in a byte. These were stored in a table via the Monitor or the POKE command. From there, the graphic could be referenced by number (a table could contain up to 255 shapes), and built-in Applesoft routines permitted scaling, rotating, and drawing or erasing the shape. An XOR mode was also available to allow the shape to be visible on any color background; this had the advantage, also, of allowing the shape to be easily erased by redrawing it. Apple did not provide any utilities for creating shape tables; they had to be created by hand, usually by plotting on graph paper, then calculating the hexadecimal values and entering them into the computer. Beagle Bros created a shape table editing program, which eliminated the "number crunching", called Apple Mechanic, and a related program, Font Mechanic.

  Read more →
• 

  IDMS

  The Integrated Database Management System (IDMS) is a network model (CODASYL) database management system for mainframes. It was first developed at BFGoodrich and later marketed by Cullinane Database Systems (renamed Cullinet in 1983). Since 1989 the product has been owned by Computer Associates (now CA Technologies), who renamed it Advantage CA-IDMS and later simply to CA IDMS. In 2018 Broadcom acquired CA Technologies, renaming it back to IDMS. == History == The roots of IDMS go back to the pioneering database management system called Integrated Data Store (IDS), developed at General Electric by a team led by Charles Bachman and first released in 1964. In the early 1960s IDS was taken from its original form, by the computer group of the BFGoodrich Chemical Division, and re-written in a language called Intermediate System Language (ISL). ISL was designed as a portable system programming language able to produce code for a variety of target machines. Since ISL was actually written in ISL, it was able to be ported to other machine architectures with relative ease, and then to produce code that would execute on them. The Chemical Division computer group had given some thought to selling copies of IDMS to other companies, but was told by management that they were not in the software products business. Eventually, a deal was struck with John Cullinane to buy the rights and market the product. Because Cullinane was required to remit royalties back to B.F. Goodrich, all add-on products were listed and billed as separate products – even if they were mandatory for the core IDMS product to work. This sometimes confused customers. The original platforms were the GE 235 computer and GE DATANET-30 message switching computer: later the product was ported to IBM mainframes and to DEC and ICL hardware. The IBM-ported version runs on IBM mainframe systems (System/360, System/370, System/390, zSeries, System z9). In the mid-1980s, it was claimed that some 2,500 IDMS licenses had been sold. Users included the Strategic Air Command, Ford of Canada, Ford of Europe, Jaguar Cars, Clarks Shoes UK, Axa/PPP, MAPFRE, Royal Insurance, Tesco, Manulife, Hudson's Bay Company, Cleveland Clinic, Bank of Canada, General Electric, Aetna and BT in the UK. A version for use on the Digital Equipment Corporation PDP-11 series of computers was sold to DEC and was marketed as DBMS-11. In 1976 the source code was licensed to ICL, who ported the software to run on their 2900 series mainframes, and subsequently also on the older 1900 range. ICL continued development of the software independently of Cullinane, selling the original ported product under the name ICL 2900 IDMS and an enhanced version as IDMSX. In this form it was used by many large UK users, an example being the Pay-As-You-Earn system operated by Inland Revenue. Many of these IDMSX systems for UK Government were still running in 2013. In the early to mid-1980s, relational database management systems started to become more popular, encouraged by increasing hardware power and the move to minicomputers and client–server architecture. Relational databases offered improved development productivity over CODASYL systems, and the traditional objections based on poor performance were slowly diminishing. Cullinet attempted to continue competing against IBM's DB2 and other relational databases by developing a relational front-end and a range of productivity tools. These included Automatic System Facility (ASF), which made use of a pre-existing IDMS feature called LRF (Logical Record Facility). ASF was a fill-in-the-blanks database generator that would also develop a mini-application to maintain the tables. It is difficult to judge whether such features may have been successful in extending the selling life of the product, but they made little impact in the long term. Those users who stayed with IDMS were primarily interested in its high performance, not in its relational capabilities. It was widely recognized (helped by a high-profile campaign by E. F. Codd, the father of the relational model) that there was a significant difference between a relational database and a network database with a relational veneer. In 1989 Computer Associates continued after Cullinet acquisition with the development and released Release 12.0 with full SQL in 1992–93. CA Technologies continued to market and support the CA IDMS and enhanced IDMS in subsequent releases by TCP/IP support, two phase commit support, XML publishing, zIIP specialty processor support, Web-enabled access in combination with CA IDMS Server, SQL Option and GUI database administration via CA IDMS Visual DBA tool. CA-IDMS systems are today still running businesses worldwide. Many customers have opted to web-enable their applications via the CA-IDMS SQL Option which is part of CA Technologies' Dual Database Strategy. == Integrated Data Dictionary == One of the sophisticated features of IDMS was its built-in Integrated data dictionary (IDD). The IDD was primarily developed to maintain database definitions. It was itself an IDMS database. DBAs (database administrators) and other users interfaced with the IDD using a language called Data Dictionary Definition Language (DDDL). IDD was also used to store definitions and code for other products in the IDMS family such as ADS/Online and IDMS-DC. IDD's power was that it was extensible and could be used to create definitions of just about anything. Some companies used it to develop in-house documentation. == Overview == === Logical Data Model === The data model offered to users is the CODASYL network model. The main structuring concepts in this model are records and sets. Records essentially follow the COBOL pattern, consisting of fields of different types: this allows complex internal structure such as repeating items and repeating groups. The most distinctive structuring concept in the Codasyl model is the set. Not to be confused with a mathematical set, a Codasyl set represents a one-to-many relationship between records: one owner, many members. The fact that a record can be a member in many different sets is the key factor that distinguishes the network model from the earlier hierarchical model. As with records, each set belongs to a named set type (different set types model different logical relationships). Sets are in fact ordered, and the sequence of records in a set can be used to convey information. A record can participate as an owner and member of any number of sets. Records have identity, the identity being represented by a value known as a database key. In IDMS, as in most other Codasyl implementations, the database key is directly related to the physical address of the record on disk. Database keys are also used as pointers to implement sets in the form of linked lists and trees. This close correspondence between the logical model and the physical implementation (which is not a strictly necessary part of the Codasyl model, but was a characteristic of all successful implementations) is responsible for the efficiency of database retrieval, but also makes operations such as database loading and restructuring rather expensive. Records can be accessed directly by database key, by following set relationships, or by direct access using key values. Initially the only direct access was through hashing, a mechanism known in the Codasyl model as CALC access. In IDMS, CALC access is implemented through an internal set, linking all records that share the same hash value to an owner record that occupies the first few bytes of every disk page. In subsequent years, some versions of IDMS added the ability to access records using BTree-like indexes. === Storage === IDMS organizes its databases as a series of files. These files are mapped and pre-formatted into so-called areas. The areas are subdivided into pages which correspond to physical blocks on the disk. The database records are stored within these blocks. The DBA allocates a fixed number of pages in a file for each area. The DBA then defines which records are to be stored in each area, and details of how they are to be stored. IDMS intersperses special space-allocation pages throughout the database. These pages are used to keep track of the free space available in each page in the database. To reduce I/O requirements, the free space is only tracked for all pages when the free space for the area falls below 30%. Four methods are available for storing records in an IDMS database: Direct, Sequential, CALC, and VIA. The Fujitsu/ICL IDMSX version extends this with two more methods, Page Direct, and Random. In direct mode the target database key is specified by the user and is stored as close as possible to that DB key, with the actual DB key on which the record is stored being returned to the application program. Sequential placement (not to be confused with indexed sequential), simply places each new record at the end of the area. This option is rarely used. CALC uses a hashing algo

  Read more →
• 

  Truth discovery

  Truth discovery (also known as truth finding) is the process of choosing the actual true value for a data item when different data sources provide conflicting information on it. Several algorithms have been proposed to tackle this problem, ranging from simple methods like majority voting to more complex ones able to estimate the trustworthiness of data sources. Truth discovery problems can be divided into two sub-classes: single-truth and multi-truth. In the first case only one true value is allowed for a data item (e.g birthday of a person, capital city of a country). While in the second case multiple true values are allowed (e.g. cast of a movie, authors of a book). Typically, truth discovery is the last step of a data integration pipeline, when the schemas of different data sources have been unified and the records referring to the same data item have been detected. == General principles == The abundance of data available on the web makes more and more probable to find that different sources provide (partially or completely) different values for the same data item. This, together with the fact that we are increasing our reliance on data to derive important decisions, motivates the need of developing good truth discovery algorithms. Many currently available methods rely on a voting strategy to define the true value of a data item. Nevertheless, recent studies, have shown that, if we rely only on majority voting, we could get wrong results even in 30% of the data items. The solution to this problem is to assess the trustworthiness of the sources and give more importance to votes coming from trusted sources. Ideally, supervised learning techniques could be exploited to assign a reliability score to sources after hand-crafted labeling of the provided values; unfortunately, this is not feasible since the number of needed labeled examples should be proportional to the number of sources, and in many applications the number of sources can be prohibitive. == Single-truth vs multi-truth discovery == Single-truth and multi-truth discovery are two very different problems. Single-truth discovery is characterized by the following properties: only one true value is allowed for each data item; different values provided for a given data item oppose to each other; values and sources can either be correct or erroneous. While in the multi-truth case the following properties hold: the truth is composed by a set of values; different values could provide a partial truth; claiming one value for a given data item does not imply opposing to all the other values; the number of true values for each data item is not known a priori. Multi-truth discovery has unique features that make the problem more complex and should be taken into consideration when developing truth-discovery solutions. The examples below point out the main differences of the two methods. Knowing that in both examples the truth is provided by source 1, in the single truth case (first table) we can say that sources 2 and 3 oppose to the truth and as a result provide wrong values. On the other hand, in the second case (second table), sources 2 and 3 are neither correct nor erroneous, they instead provide a subset of the true values and at the same time they do not oppose the truth. == Source trustworthiness == The vast majority of truth discovery methods are based on a voting approach: each source votes for a value of a certain data item and, at the end, the value with the highest vote is select as the true one. In the more sophisticated methods, votes do not have the same weight for all the data sources, more importance is indeed given to votes coming from trusted sources. Source trustworthiness usually is not known a priori but estimated with an iterative approach. At each step of the truth discovery algorithm the trustworthiness score of each data source is refined, improving the assessment of the true values that in turn leads to a better estimation of the trustworthiness of the sources. This process usually ends when all the values reach a convergence state. Source trustworthiness can be based on different metrics, such as accuracy of provided values, copying values from other sources and domain coverage. Detecting copying behaviors is very important, in fact, copy allows to spread false values easily making truth discovery very hard, since many sources would vote for the wrong values. Usually systems decrease the weight of votes associated to copied values or even don’t count them at all. == Single-truth methods == Most of the currently available truth discovery methods have been designed to work well only in the single-truth case. Below are reported some of the characteristics of the most relevant typologies of single-truth methods and how different systems model source trustworthiness. === Majority voting === Majority voting is the simplest method, the most popular value is selected as the true one. Majority voting is commonly used as a baseline when assessing the performances of more complex methods. === Web-link based === These methods estimate source trustworthiness exploiting a similar technique to the one used to measure authority of web pages based on web links. The vote assigned to a value is computed as the sum of the trustworthiness of the sources that provide that particular value, while the trustworthiness of a source is computed as the sum of the votes assigned to the values that the source provides. === Information-retrieval based === These methods estimate source trustworthiness using similarity measures typically used in information retrieval. Source trustworthiness is computed as the cosine similarity (or other similarity measures) between the set of values provided by the source and the set of values considered true (either selected in a probabilistic way or obtained from a ground truth). === Bayesian based === These methods use Bayesian inference to define the probability of a value being true conditioned on the values provided by all the sources. P ( v ∣ ψ ( o ) ) = P ( ψ ( o ) ∣ v ) ⋅ P ( v ) P ( ψ ( o ) ) {\displaystyle P(v\mid \psi (o))={\frac {P(\psi (o)\mid v)\cdot P(v)}{P(\psi (o))}}} where v {\displaystyle \textstyle v} is a value provided for a data item o {\displaystyle \textstyle o} and ψ ( o ) {\displaystyle \textstyle \psi (o)} is the set of the observed values provided by all the sources for that specific data item. The trustworthiness of a source is then computed based on the accuracy of the values that provides. Other more complex methods exploit Bayesian inference to detect copying behaviors and use these insights to better assess source trustworthiness. == Multi-truth methods == Due to its complexity, less attention has been devoted to the study of the multi-truth discovery Below are reported two typologies of multi-truth methods and their characteristics. === Bayesian based === These methods use Bayesian inference to define the probability of a group of values being true conditioned on the values provided by all the data sources. In this case, since there could be multiple true values for each data item, and sources can provide multiple values for a single data item, it is not possible to consider values individually. An alternative is to consider mappings and relations between set of provided values and sources providing them. The trustworthiness of a source is then computed based on the accuracy of the values that provides. More sophisticated methods also consider domain coverage and copying behaviors to better estimate source trustworthiness. === Probabilistic Graphical Models based === These methods use probabilistic graphical models to automatically define the set of true values of given data item and also to assess source quality without need of any supervision. == Applications == Many real-world applications can benefit from the use of truth discovery algorithms. Typical domains of application include: healthcare, crowd/social sensing, crowdsourcing aggregation, information extraction and knowledge base construction. Truth discovery algorithms could be also used to revolutionize the way in which web pages are ranked in search engines, going from current methods based on link analysis like PageRank, to procedures that rank web pages based on the accuracy of the information they provide.

  Read more →
• 

  Site Security Handbook

  The Site Security Handbook, RFC 2196, is a guide on setting computer security policies and procedures for sites that have systems on the Internet (however, the information provided should also be useful to sites not yet connected to the Internet). The guide lists issues and factors that a site must consider when setting their own policies. It makes a number of recommendations and provides discussions of relevant areas. This guide is only a framework for setting security policies and procedures. In order to have an effective set of policies and procedures, a site will have to make many decisions, gain agreement, and then communicate and implement these policies. The guide is a product of the IETF SSH working group, and was published in 1997, obsoleting the earlier RFC 1244 from 1991.

  Read more →
• 

  Hit-testing

  In computer graphics programming, hit-testing (hit detection, picking, or pick correlation) is the process of determining whether a user-controlled cursor (such as a mouse cursor or touch-point on a touch-screen interface) intersects a given graphical object (such as a shape, line, or curve) drawn on the screen. Hit-testing may be performed on the movement or activation of a mouse or other pointing device. Hit-testing is used by GUI environments to respond to user actions, such as selecting a menu item or a target in a game based on its visual location. In web programming languages such as HTML, SVG, and CSS, this is associated with the concept of pointer-events (e.g. user-initiated cursor movement or object selection). Collision detection is a related concept for detecting intersections of two or more different graphical objects, rather than intersection of a cursor with one or more graphical objects. == Algorithm == There are many different algorithms that may be used to perform hit-testing, with different performance or accuracy outcomes. One common hit-test algorithm for axis aligned bounding boxes. A key idea is that the box being tested must be either entirely above, entirely below, entirely to the right or left of the current box. If this is not possible, they are colliding. Example logic is presented in the pseudo-code below: In Python:

  Read more →