AI Chat Free Online

AI Chat Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  MetroHero

  MetroHero is a semi-defunct real-time transit tracking and performance analysis application for the Washington Metro rapid transit system. Originally available on iOS, Android, and the web, it allows users to view live maps of all trains on a specific line, summary statistics relating to real-time system performance, and user feedback on current Metro conditions. The app launched in 2015, followed by ARIES for Transit, a related project from the same developers, and continued functioning until its original developers shut it down in 2023. Afterwards, forks of the application went live to allow for its continued public use, and the Washington Metropolitan Area Transit Authority (WMATA), Metro's operator, announced that it would launch a similar app. The app has been described by local news media as popular and well-liked among Washington, D.C.-area residents. == History and main development == MetroHero was initially developed by James and Jennifer Pizzurro, who both attended George Washington University and studied computer science. They said that they were inspired to create the app after experiencing train delays and searching for an app to track a train after boarding; such an app did not exist for the Washington Metro. The development of the app was not endorsed by WMATA, but it did use publicly available data from the agency. MetroHero launched as an Android application in September 2015, followed by the release of an iOS-compatible web app in December of that year. A standalone iOS app launched in April 2018, but the web app remained supported. By April 2018, MetroHero had approximately 13,000 monthly active users. James Pizzurro has stated that the app's intended audience was regular Metro commuters who wanted to communicate with each other about active problems, as opposed to tourists and riders who only wanted train time data. Throughout the application's development, the Pizzurros had been advocates for Metro's transparency with riders and the community by providing more high-quality data and taking on the feedback of developers. In particular, they criticized Metro's reluctance to uniquely identify individual train trips and its decision to obscure data under certain circumstances, which have posed problems for MetroHero's data collection. In addition to their work on MetroHero, the app's developers led or participated in other initiatives related to transit in the Greater Washington area. In 2019, MetroHero partnered with a local transit group to analyze Metrobus data and publish a "Metrobus Report Card", along with proposed goals and recommendations based on the report's findings. Based on this experience, MetroHero's developers began a sister project, the Adherence + Reliability + Integrity Evaluation System for Transit (ARIES for Transit), which displays data and issues grades for Washington- and Baltimore-area transit systems. Separately, James Pizzurro used MetroHero data to inform Rail Transit OPS, an independent Metro oversight group, and assist in its documentation of Metro system incidents. == Application == The MetroHero application uses several interfaces, including an overall dashboard and a live map, to display data to its users. On the dashboard, system-wide train summary data, such as the number of operating trains and headway adherence, is visible. The map offers a visual representation of all trains' positions throughout the system, filtered by line. Individual stations and trains can be selected to see ratings and comments provided by other users, including both positive and negative notes like cleanliness and crowdedness. Additionally, a list of train wait times is given, along with aggregate data like average wait time. Any train delays or service incidents are visible in the app. MetroHero uses several data sources for the various components of its application. Train positions and other operational data are provided by WMATA as part of its initiative to release open data for third-party developers. However, MetroHero's developers noted that the Metro-provided information is sometimes inaccurate and incomplete, thereby limiting the accuracy of MetroHero. The app also collects crowdsourced data from its users, who can report conditions in train cars and stations and add to reports sent by other people. Additionally, MetroHero parses data from Twitter feeds to learn about system incidents, including delays and fires. In addition to the web app, Android app, and iOS app, MetroHero's initial developers maintained automated social media accounts that alerted customers about Metro service; these accounts were discontinued upon the original app's eventual shutdown. MetroHero also hosts archived performance data for later review, a feature that is sometimes used after major incidents. == Shutdown and future == In February 2023, James Pizzurro announced that MetroHero would be shut down on July 1, 2023, citing "positive changes ... in the app landscape and in WMATA's data management and communication" and the costs and time associated with maintaining the app. Shortly before the application's end date, the Pizzurros shared MetroHero's source code on GitHub, which prompted others to fork the code and begin maintaining new instances of MetroHero to succeed the original app. The original website went offline on July 1, as planned. Historically, WMATA has not offered its own real-time map or similar service, citing other apps from third parties which accomplished the same task. However, on June 30, 2023, Randy Clarke, WMATA's general manager, announced that Metro would begin offering a similar service as MetroHero did. The app, initially named MetroMeter, was planned to begin operating in early July and would provide real-time information on trains, headways, and service schedules. Metro also noted its intentions to extend this service to Metrobus and MetroAccess. On July 20, Metro announced that the app had been renamed to MetroPulse and launched it in beta. MetroHero's other project, ARIES for Transit, was not affected by the shutdown. == Reception == MetroHero was generally well-received and has been recognized for its usage among Washington-area commuters. DCist called it one of the "most praised" Metro tracking apps, and WMATA publicly acknowledged its popularity when announcing its decision to establish MetroPulse. Chris Barnes, a member of the Metro Riders' Advisory Council, said that the app is considered important among riders because it fulfills a need for riders to have reliable and transparent transit information, albeit somewhat hindered by flaws in WMATA's data.

  Read more →
• 

  Cyber attribution

  In the area of computer security, cyber attribution is an attribution of cybercrime, i.e., finding who perpetrated a cyberattack. Uncovering a perpetrator may give insights into various security issues, such as infiltration methods, communication channels, etc., and may help in enacting specific countermeasures. Cyber attribution is a costly endeavor requiring considerable resources and expertise in cyber forensic analysis. For governments and other major players dealing with cybercrime would require not only technical solutions, but legal and political ones as well, and for the latter ones cyber attribution is crucial. Attributing a cyberattack is difficult, and of limited interest to companies that are targeted by cyberattacks. In contrast, secret services often have a compelling interest in finding out whether a state is behind the attack. A further challenge in attribution of cyberattacks is the possibility of a false flag attack, where the actual perpetrator makes it appear that someone else caused the attack. Every stage of the attack may leave artifacts, such as entries in log files, that can be used to help determine the attacker's goals and identity. In the aftermath of an attack, investigators often begin by saving as many artifacts as they can find, and then try to determine the attacker.

  Read more →
• 

  Molecular graphics

  Molecular graphics is the discipline and philosophy of studying molecules and their properties through graphical representation. IUPAC limits the definition to representations on a "graphical display device". Ever since Dalton's atoms and Kekulé's benzene, there has been a rich history of hand-drawn atoms and molecules, and these representations have had an important influence on modern molecular graphics. Colour molecular graphics are often used on chemistry journal covers artistically. == History == Prior to the use of computer graphics in representing molecular structure, Robert Corey and Linus Pauling developed a system for representing atoms or groups of atoms from hard wood on a scale of 1 inch = 1 angstrom connected by a clamping device to maintain the molecular configuration. These early models also established the CPK coloring scheme that is still used today to differentiate the different types of atoms in molecular models (e.g. carbon = black, oxygen = red, nitrogen = blue, etc). This early model was improved upon in 1966 by W.L. Koltun and are now known as Corey-Pauling-Koltun (CPK) models. The earliest efforts to produce models of molecular structure was done by Project MAC using wire-frame models displayed on a cathode ray tube in the mid 1960s. In 1965, Carroll Johnson distributed the Oak Ridge thermal ellipsoid plot (ORTEP) that visualized molecules as a ball-and-stick model with lines representing the bonds between atoms and ellipsoids to represent the probability of thermal motion. Thermal ellipsoid plots quickly became the de facto standard used in the display of X-ray crystallography data, and are still in wide use today. The first practical use of molecular graphics was a simple display of the protein myoglobin using a wireframe representation in 1966 by Cyrus Levinthal and Robert Langridge working at Project MAC. Among the milestones in high-performance molecular graphics was the work of Nelson Max in "realistic" rendering of macromolecules using reflecting spheres. Initially much of the technology concentrated on high-performance 3D graphics. During the 1970s, methods for displaying 3D graphics using cathode ray tubes were developed using continuous tone computer graphics in combination with electro-optic shutter viewing devices. The first devices used an active shutter 3D system, generating different perspective views for the left and right channel to provide the illusion of three-dimensional viewing. Stereoscopic viewing glasses were designed using lead lanthanum zirconate titanate (PLZT) ceramics as electronically controlled shutter elements. Active 3D glasses require batteries and work in concert with the display to actively change the presentation by the lenses to the wearer's eyes. Many modern 3D glasses use a passive, polarized 3D system that enables the wearer to visualize 3D effects based on their own perception. Passive 3D glasses are more common today since they are less expensive. The requirements of macromolecular crystallography also drove molecular graphics because the traditional techniques of physical model-building could not scale. The first two protein structures solved by molecular graphics without the aid of the Richards' Box were built with Stan Swanson's program FIT on the Vector General graphics display in the laboratory of Edgar Meyer at Texas A&M University: First Marge Legg in Al Cotton's lab at A&M solved a second, higher-resolution structure of staph. nuclease (1975) and then Jim Hogle solved the structure of monoclinic lysozyme in 1976. A full year passed before other graphics systems were used to replace the Richards' Box for modelling into density in 3-D. Alwyn Jones' FRODO program (and later "O") were developed to overlay the molecular electron density determined from X-ray crystallography and the hypothetical molecular structure. === Timeline === == Types == === Ball-and-stick models === In the ball-and-stick model, atoms are drawn as small sphered connected by rods representing the chemical bonds between them. === Space-filling models === In the space-filling model, atoms are drawn as solid spheres to suggest the space they occupy, in proportion to their van der Waals radii. Atoms that share a bond overlap with each other. === Surfaces === In some models, the surface of the molecule is approximated and shaded to represent a physical property of the molecule, such as electronic charge density. === Ribbon diagrams === Ribbon diagrams are schematic representations of protein structure and are one of the most common methods of protein depiction used today. The ribbon shows the overall path and organization of the protein backbone in 3D, and serves as a visual framework on which to hang details of the full atomic structure, such as the balls for the oxygen atoms bound to the active site of myoglobin in the adjacent image. Ribbon diagrams are generated by interpolating a smooth curve through the polypeptide backbone. α-helices are shown as coiled ribbons or thick tubes, β-strands as arrows, and non-repetitive coils or loops as lines or thin tubes. The direction of the polypeptide chain is shown locally by the arrows, and may be indicated overall by a colour ramp along the length of the ribbon.

  Read more →
• 

  RFPolicy

  The RFPolicy outlines a method for contacting vendors about security vulnerabilities found in their products. It was initially written in 2000 by hacker and security consultant Rain Forest Puppy. It was perhaps the second disclosure policy, following Simple Nomad's. The policy gives the vendor five working days to respond to the reporter of the bug. If the vendor fails to contact the reporter within those five days, the issue is recommended to be disclosed to the general community. The reporter should help the vendor reproduce the bug and work out a fix. The reporter should delay notifying the general community about the bug if the vendor provides feasible reasons for requiring so. If the vendor fails to respond or shuts down communication with the reporter of the problem within five working days, the reporter should disclose the issue to the general community. When issuing an alert or fix, the vendor should give the reporter proper credit for reporting the bug. Context for the history of vulnerability disclosure is available in a history article.

  Read more →
• 

  Artificial brain

  An artificial brain (or artificial mind) is software and hardware with cognitive abilities similar to those of the animal or human brain. Research investigating "artificial brains" and brain emulation plays three important roles in science: An ongoing attempt by neuroscientists to understand how the human brain works, known as cognitive neuroscience. A thought experiment in the philosophy of artificial intelligence, demonstrating that it is possible, at least in theory, to create a machine that has all the capabilities of a human being. A long-term project to create machines exhibiting behavior comparable to those of animals with complex central nervous system such as mammals and most particularly humans. The ultimate goal of creating a machine exhibiting human-like behavior or intelligence is sometimes called strong AI. An example of the first objective is the project reported by Aston University in Birmingham, England where researchers are using biological cells to create "neurospheres" (small clusters of neurons) in order to develop new treatments for diseases including Alzheimer's, motor neurone and Parkinson's disease. The second objective is a reply to arguments such as John Searle's Chinese room argument, Hubert Dreyfus's critique of AI or Roger Penrose's argument in The Emperor's New Mind. These critics argued that there are aspects of human consciousness or expertise that can not be simulated by machines. One reply to their arguments is that the biological processes inside the brain can be simulated to any degree of accuracy. This reply was made as early as 1950, by Alan Turing in his classic paper "Computing Machinery and Intelligence". The third objective is generally called artificial general intelligence by researchers. However, Ray Kurzweil prefers the term "strong AI". In his book The Singularity is Near, he focuses on whole brain emulation using conventional computing machines as an approach to implementing artificial brains, and claims (on grounds of computer power continuing an exponential growth trend) that this could be done by 2025. Henry Markram, director of the Blue Brain project (which is attempting brain emulation), made a similar claim (2020) at the Oxford TED conference in 2009. == Approaches to brain simulation == W. Ross Ashby's pioneering work in cybernetics provided an early mathematical framework for understanding adaptive brain-like systems. In his 1952 book Design for a Brain, Ashby proposed that the brain could be modeled as an ultrastable system that maintains equilibrium through continuous adaptation to environmental perturbations. His approach used differential equations and state-space models to describe how neural systems could exhibit purposeful behavior through feedback mechanisms. Ashby's homeostat, a physical machine built in 1948, demonstrated these principles through an electromechanical device with four interconnected units that automatically adjusted their parameters to maintain stability when disturbed. The homeostat represented one of the first attempts to build an artificial system exhibiting brain-like adaptive behavior, influencing subsequent work in adaptive systems, neural networks, and artificial intelligence. Although direct human brain emulation using artificial neural networks on a high-performance computing engine is a commonly discussed approach, there are other approaches. An alternative artificial brain implementation could be based on Holographic Neural Technology (HNeT) non linear phase coherence/decoherence principles. The analogy has been made to quantum processes through the core synaptic algorithm which has strong similarities to the quantum mechanical wave equation. EvBrain is a form of evolutionary software that can evolve "brainlike" neural networks, such as the network immediately behind the retina. In November 2008, IBM received a US$4.9 million grant from the Pentagon for research into creating intelligent computers. The Blue Brain project is being conducted with the assistance of IBM in Lausanne. The project is based on the premise that it is possible to artificially link the neurons "in the computer" by placing thirty million synapses in their proper three-dimensional position. Some proponents of strong AI speculated in 2009 that computers in connection with Blue Brain and Soul Catcher may exceed human intellectual capacity by around 2015, and that it is likely that we will be able to download the human brain at some time around 2050. While Blue Brain is able to represent complex neural connections on the large scale, the project does not achieve the link between brain activity and behaviors executed by the brain. In 2012, project Spaun (Semantic Pointer Architecture Unified Network) attempted to model multiple parts of the human brain through large-scale representations of neural connections that generate complex behaviors in addition to mapping. Spaun's design recreates elements of human brain anatomy. The model, consisting of approximately 2.5 million neurons, includes features of the visual and motor cortices, GABAergic and dopaminergic connections, the ventral tegmental area (VTA), substantia nigra, and others. The design allows for several functions in response to eight tasks, using visual inputs of typed or handwritten characters and outputs carried out by a mechanical arm. Spaun's functions include copying a drawing, recognizing images, and counting. There are good reasons to believe that, regardless of implementation strategy, the predictions of realising artificial brains in the near future are optimistic. In particular brains (including the human brain) and cognition are not currently well understood, and the scale of computation required is unknown. Another near term limitation is that all current approaches for brain simulation require orders of magnitude larger power consumption compared with a human brain. The human brain consumes about 20 W of power, whereas current supercomputers may use as much as 1 MW—i.e., an order of 100,000 more. == Artificial brain thought experiment == Some critics of brain simulation believe that it is simpler to create general intelligent action directly without imitating nature. Some commentators have used the analogy that early attempts to construct flying machines modeled them after birds, but that modern aircraft do not look like birds.

  Read more →
• 

  T-pose

  In computer animation, a T-pose is a default posing for a humanoid 3D model's skeleton before it is animated. It is called so because of its shape: the straight legs and arms of a humanoid model combine to form a capital letter T. When the arms are angled downwards, the pose is sometimes referred to as an A-pose instead. Likewise, if the arms are angled upward, it is called a Y-pose. Generic terms encompassing all these (especially for non-humanoid models) include bind pose, blind pose, and reference pose. == Usage == The T-pose is primarily used as the default armature pose for skeletal animation in 3D software, which is then manipulated to create animation. The purpose of the T-pose relates to the important elements of the body being axis-aligned, thereby making it easier to rig the model for animation, physics, and other controls. Depending on the exact geometry of the model, other poses such as the A-pose may be more suitable for vertex deformation around areas such as the shoulders. Outside of being default poses in animation software, T-poses are typically used as placeholders for animation not yet completed, particularly in 3D animated video games. In some motion capture software, a T-pose must be assumed by the actor in the motion capture suit before motion capturing can begin. There are other poses used, but the T-pose is the most common one. == As an Internet meme == Starting in 2016 and resurfacing in 2017, the T-pose has become a widespread Internet meme due to its bizarre and somewhat comedic appearance, especially in video game glitches where a character's animation is unexpectedly supplanted by a T-pose. In a prerelease video of the game NBA Elite 11, the demo was filled with glitches, notably one unintentionally showing a T-pose in place of the proper animation for the model of player Andrew Bynum. The glitch later gained fame as the "Jesus Bynum glitch". Publisher EA eventually cancelled the game as they found it unsatisfactory. A similar occurrence happened with Cyberpunk 2077. In the 2023 Formula One season, driver George Russell performed a T-pose in the opening credits of the series' TV broadcasts. This quickly became a meme within the motorsports community. Russell repeated the pose after claiming pole position at the 2024 Canadian Grand Prix and winning the 2024 Austrian Grand Prix.

  Read more →
• 

  Image texture

  An image texture is the small-scale structure perceived on an image, based on the spatial arrangement of color or intensities. It can be quantified by a set of metrics calculated in image processing. Image texture metrics give us information about the whole image or selected regions. Image textures can be artificially created or found in natural scenes captured in an image. Image textures are one way that can be used to help in segmentation or classification of images. For more accurate segmentation the most useful features are spatial frequency and an average grey level. To analyze an image texture in computer graphics, there are two ways to approach the issue: structured approach and statistical approach. == Structured approach == A structured approach sees an image texture as a set of primitive texels in some regular or repeated pattern. This works well when analyzing artificial textures. To obtain a structured description a characterization of the spatial relationship of the texels is gathered by using Voronoi tessellation of the texels. == Statistical approach == A statistical approach sees an image texture as a quantitative measure of the arrangement of intensities in a region. In general this approach is easier to compute and is more widely used, since natural textures are made of patterns of irregular subelements. === Edge detection === The use of edge detection is to determine the number of edge pixels in a specified region, helps determine a characteristic of texture complexity. After edges have been found the direction of the edges can also be applied as a characteristic of texture and can be useful in determining patterns in the texture. These directions can be represented as an average or in a histogram. Consider a region with N pixels. the gradient-based edge detector is applied to this region by producing two outputs for each pixel p: the gradient magnitude Mag(p) and the gradient direction Dir(p). The edgeness per unit area can be defined by F e d g e n e s s = | { p | M a g ( p ) > T } | N {\displaystyle F_{edgeness}={\frac {|\{p|Mag(p)>T\}|}{N}}} for some threshold T. To include orientation with edgeness histograms for both gradient magnitude and gradient direction can be used. Hmag(R) denotes the normalized histogram of gradient magnitudes of region R, and Hdir(R) denotes the normalized histogram of gradient orientations of region R. Both are normalized according to the size NR Then F m a g , d i r = ( H m a g ( R ) , H d i r ( R ) ) {\displaystyle F_{mag,dir}=(H_{mag}(R),H_{dir}(R))} is a quantitative texture description of region R. === Co-occurrence matrices === The co-occurrence matrix captures numerical features of a texture using spatial relations of similar gray tones. Numerical features computed from the co-occurrence matrix can be used to represent, compare, and classify textures. The following are a subset of standard features derivable from a normalized co-occurrence matrix: A n g u l a r 2 n d M o m e n t = ∑ i ∑ j p [ i , j ] 2 C o n t r a s t = ∑ i = 1 N g ∑ j = 1 N g n 2 p [ i , j ] , where | i − j | = n C o r r e l a t i o n = ∑ i = 1 N g ∑ j = 1 N g ( i j ) p [ i , j ] − μ x μ y σ x σ y E n t r o p y = − ∑ i ∑ j p [ i , j ] l n ( p [ i , j ] ) {\displaystyle {\begin{aligned}Angular{\text{ }}2nd{\text{ }}Moment&=\sum _{i}\sum _{j}p[i,j]^{2}\\Contrast&=\sum _{i=1}^{Ng}\sum _{j=1}^{Ng}n^{2}p[i,j]{\text{, where }}|i-j|=n\\Correlation&={\frac {\sum _{i=1}^{Ng}\sum _{j=1}^{Ng}(ij)p[i,j]-\mu _{x}\mu _{y}}{\sigma _{x}\sigma _{y}}}\\Entropy&=-\sum _{i}\sum _{j}p[i,j]ln(p[i,j])\\\end{aligned}}} where p [ i , j ] {\displaystyle p[i,j]} is the [ i , j ] {\displaystyle [i,j]} th entry in a gray-tone spatial dependence matrix, and Ng is the number of distinct gray-levels in the quantized image. One negative aspect of the co-occurrence matrix is that the extracted features do not necessarily correspond to visual perception. It is used in dentistry for the objective evaluation of lesions [DOI: 10.1155/2020/8831161], treatment efficacy [DOI: 10.3390/ma13163614; DOI: 10.11607/jomi.5686; DOI: 10.3390/ma13173854; DOI: 10.3390/ma13132935] and bone reconstruction during healing [DOI: 10.5114/aoms.2013.33557; DOI: 10.1259/dmfr/22185098; EID: 2-s2.0-81455161223; DOI: 10.3390/ma13163649]. === Laws texture energy measures === Another approach is to use local masks to detect various types of texture features. Laws originally used four vectors representing texture features to create sixteen 2D masks from the outer products of the pairs of vectors. The four vectors and relevant features were as follows: L5 = [ +1 +4 6 +4 +1 ] (Level) E5 = [ -1 -2 0 +2 +1 ] (Edge) S5 = [ -1 0 2 0 -1 ] (Spot) R5 = [ +1 -4 6 -4 +1 ] (Ripple) To these 4, a fifth is sometimes added: W5 = [ -1 +2 0 -2 +1 ] (Wave) From Laws' 4 vectors, 16 5x5 "energy maps" are then filtered down to 9 in order to remove certain symmetric pairs. For instance, L5E5 measures vertical edge content and E5L5 measures horizontal edge content. The average of these two measures is the "edginess" of the content. The resulting 9 maps used by Laws are as follows: L5E5/E5L5 L5R5/R5L5 E5S5/S5E5 S5S5 R5R5 L5S5/S5L5 E5E5 E5R5/R5E5 S5R5/R5S5 Running each of these nine maps over an image to create a new image of the value of the origin ([2,2]) results in 9 "energy maps," or conceptually an image with each pixel associated with a vector of 9 texture attributes. === Autocorrelation and power spectrum === The autocorrelation function of an image can be used to detect repetitive patterns of textures. == Texture segmentation == The use of image texture can be used as a description for regions into segments. There are two main types of segmentation based on image texture, region based and boundary based. Though image texture is not a perfect measure for segmentation it is used along with other measures, such as color, that helps solve segmenting in image. === Region based === Attempts to group or cluster pixels based on texture properties. === Boundary based === Attempts to group or cluster pixels based on edges between pixels that come from different texture properties.

  Read more →
• 

  Data remanence

  Data remanence is the residual representation of digital data that remains even after attempts have been made to remove or erase the data. This residue may result from data being left intact by a nominal file deletion operation, by reformatting of storage media that does not remove data previously written to the media, or through physical properties of the storage media that allow previously written data to be recovered. Data remanence may make inadvertent disclosure of sensitive information possible should the storage media be released into an uncontrolled environment (e.g., thrown in refuse containers or lost). Various techniques have been developed to counter data remanence. These techniques are classified as clearing, purging/sanitizing, or destruction. Specific methods include overwriting, degaussing, encryption, and media destruction. Effective application of countermeasures can be complicated by several factors, including media that are inaccessible, media that cannot effectively be erased, advanced storage systems that maintain histories of data throughout the data's life cycle, and persistence of data in memory that is typically considered volatile. Several standards exist for the secure removal of data and the elimination of data remanence. == Causes == Many operating systems, file managers, and other software provide a facility where a file is not immediately deleted when the user requests that action. Instead, the file is moved to a holding area (i.e. the "trash"), making it easy for the user to undo a mistake. Similarly, many software products automatically create backup copies of files that are being edited, to allow the user to restore the original version, or to recover from a possible crash (autosave feature). Even when an explicit deleted file retention facility is not provided or when the user does not use it, operating systems do not actually remove the contents of a file when it is deleted unless they are aware that explicit erasure commands are required, like on a solid-state drive. (In such cases, the operating system will issue the Serial ATA TRIM command or the SCSI UNMAP command to let the drive know to no longer maintain the deleted data.) Instead, they simply remove the file's entry from the file system directory because this requires less work and is therefore faster, and the contents of the file—the actual data—remain on the storage medium. The data will remain there until the operating system reuses the space for new data. In some systems, enough filesystem metadata are also left behind to enable easy undeletion by commonly available utility software. Even when undelete has become impossible, the data, until it has been overwritten, can be read by software that reads disk sectors directly. Computer forensics often employs such software. Likewise, reformatting, repartitioning, or reimaging a system is unlikely to write to every area of the disk, though all will cause the disk to appear empty or, in the case of reimaging, empty except for the files present in the image, to most software. Finally, even when the storage media is overwritten, physical properties of the media may permit recovery of the previous contents. In most cases however, this recovery is not possible by just reading from the storage device in the usual way, but requires using laboratory techniques such as disassembling the device and directly accessing/reading from its components. § Complications below gives further explanations for causes of data remanence. == Countermeasures == There are three levels commonly recognized for eliminating remnant data: === Clearing === Clearing is the removal of sensitive data from storage devices in such a way that there is assurance that the data may not be reconstructed using normal system functions or software file/data recovery utilities. The data may still be recoverable, but not without special laboratory techniques. Clearing is typically an administrative protection against accidental disclosure within an organization. For example, before a hard drive is re-used within an organization, its contents may be cleared to prevent their accidental disclosure to the next user. === Purging === Purging or sanitizing is the physical rewrite of sensitive data from a system or storage device done with the specific intent of rendering the data unrecoverable at a later time. Purging, proportional to the sensitivity of the data, is generally done before releasing media beyond control, such as before discarding old media, or moving media to a computer with different security requirements. === Destruction === The storage media is made unusable for conventional equipment. Effectiveness of destroying the media varies by medium and method. Depending on recording density of the media, and/or the destruction technique, this may leave data recoverable by laboratory methods. Conversely, destruction using appropriate techniques is the most secure method of preventing retrieval. == Specific methods == === Overwriting === A common method used to counter data remanence is to overwrite the storage media with new data. This is often called wiping or shredding a disk or file, by analogy to common methods of destroying print media, although the mechanism bears no similarity to these. Because such a method can often be implemented in software alone, and may be able to selectively target only part of the media, it is a popular, low-cost option for some applications. Overwriting is generally an acceptable method of clearing, as long as the media is writable and not damaged. The simplest overwrite technique writes the same data everywhere—often just a pattern of all zeros. At a minimum, this will prevent the data from being retrieved simply by reading from the media again using standard system functions. The UEFI in modern machines may offer an ATA class disk erase function as well. The ATA-6 standard governs secure erases specifications. Bitlocker is whole disk encryption and illegible without the key. Writing a fresh GPT allows a new file system to be established. Blocks will set empty but LBA read is illegible. New data will be unaffected and work fine. In an attempt to counter more advanced data recovery techniques, specific overwrite patterns and multiple passes have often been prescribed. These may be generic patterns intended to eradicate any trace signatures; an example is the seven-pass pattern 0xF6, 0x00, 0xFF, , 0x00, 0xFF, , sometimes erroneously attributed to US standard DOD 5220.22-M. One challenge with overwriting is that some areas of the disk may be inaccessible, due to media degradation or other errors. Software overwrite may also be problematic in high-security environments, which require stronger controls on data commingling than can be provided by the software in use. The use of advanced storage technologies may also make file-based overwrite ineffective (see the related discussion below under § Complications). There are specialized machines and software that are capable of doing overwriting. The software can sometimes be a standalone operating system specifically designed for data destruction. There are also machines specifically designed to wipe hard drives to the department of defense specifications DOD 5220.22-M. Writing zero to each block on hard disks and SSDs has the advantage of affording the firmware to deploy spare blocks when bad blocks are identified. Bitlocker has the advantage that data is illegible without the key. Seatools and other tools can erase disks with zero which is typical to revive old consumer class disks but they can wipe server disks albeit slowly. Modern 28TB and larger disks have an enormous number of LBA48 blocks. 40TB and 60TB disks will take proportionately longer times to wipe. ==== Feasibility of recovering overwritten data ==== Peter Gutmann investigated data recovery from nominally overwritten media in the mid-1990s. He suggested magnetic force microscopy may be able to recover such data, and developed specific patterns, for specific drive technologies, designed to counter such. These patterns have come to be known as the Gutmann method. Gutmann's belief in the possibility of data recovery is based on many questionable assumptions and factual errors that indicate a low level of understanding of how hard drives work. Daniel Feenberg, an economist at the private National Bureau of Economic Research, claims that the chances of overwritten data being recovered from a modern hard drive amount to "urban legend". He also points to the "18+1⁄2-minute gap" Rose Mary Woods created on a tape of Richard Nixon discussing the Watergate break-in. Erased information in the gap has not been recovered, and Feenberg claims doing so would be an easy task compared to recovery of a modern high density digital signal. As of November 2007, the United States Department of Defense considers overwriting acceptable for clearing magnetic media within the same security area/

  Read more →
• 

  LCD crosstalk

  LCD crosstalk is a visual defect in an LCD screen which occurs because of interference between adjacent pixels. Owing to the way rows and columns in the display are addressed, and charge is pushed around, the data on one part of the display has the potential to influence what is displayed elsewhere. This is generally known as crosstalk, and in matrix displays typically occurs in the horizontal and vertical directions. Crosstalk used to be a serious problem in the old passive-matrix (STN) displays, but is rarely discernable in modern active-matrix (TFT) displays. A fortunate side effect of inversion (see above) is that, for most display material, what little crosstalk there is largely cancelled out. For most practical purposes, the level of crosstalk in modern LCDs is negligible. Certain patterns, particularly those involving fine dots, can interact with the inversion and reveal visible crosstalk. If you try moving a small Window in front of the inversion pattern (above) which makes your screen flicker the most, you may well see crosstalk in the surrounding pattern. Different patterns are required to reveal crosstalk on different displays (depending on their inversion scheme).

  Read more →
• 

  Open-source software security

  Open-source software security is the measure of assurance or guarantee in the freedom from danger and risk inherent to an open-source software system. == Implementation debate == === Benefits === Proprietary software forces the user to accept the level of security that the software vendor is willing to deliver and to accept the rate that patches and updates are released. It is assumed that any compiler that is used creates code that can be trusted, but it has been demonstrated by Ken Thompson that a compiler can be subverted using a compiler backdoor to create faulty executables that are unwittingly produced by a well-intentioned developer. With access to the source code for the compiler, the developer has at least the ability to discover if there is any mal-intention. Kerckhoffs' principle is based on the idea that an enemy can steal a secure military system and not be able to compromise the information. His ideas were the basis for many modern security practices, and followed that security through obscurity is a bad practice. === Drawbacks === Simply making source code available does not guarantee review. An example of this occurring is when Marcus Ranum, an expert on security system design and implementation, released his first public firewall toolkit. At one time, there were over 2,000 sites using his toolkit, but only 10 people gave him any feedback or patches. Having a large amount of eyes reviewing code can "lull a user into a false sense of security". Having many users look at source code does not guarantee that security flaws will be found and fixed. == Metrics and models == There are a variety of models and metrics to measure the security of a system. These are a few methods that can be used to measure the security of software systems. === Number of days between vulnerabilities === It is argued that a system is most vulnerable after a potential vulnerability is discovered, but before a patch is created. By measuring the number of days between the vulnerability and when the vulnerability is fixed, a basis can be determined on the security of the system. There are a few caveats to such an approach: not every vulnerability is equally bad, and fixing a lot of bugs quickly might not be better than only finding a few and taking a little bit longer to fix them, taking into account the operating system, or the effectiveness of the fix. === Poisson process === The Poisson process can be used to measure the rates at which different people find security flaws between open and closed source software. The process can be broken down by the number of volunteers Nv and paid reviewers Np. The rates at which volunteers find a flaw is measured by λv and the rate that paid reviewers find a flaw is measured by λp. The expected time that a volunteer group is expected to find a flaw is 1/(Nv λv) and the expected time that a paid group is expected to find a flaw is 1/(Np λp). === Morningstar model === By comparing a large variety of open source and closed source projects a star system could be used to analyze the security of the project similar to how Morningstar, Inc. rates mutual funds. With a large enough data set, statistics could be used to measure the overall effectiveness of one group over the other. An example of such as system is as follows: 1 Star: Many security vulnerabilities. 2 Stars: Reliability issues. 3 Stars: Follows best security practices. 4 Stars: Documented secure development process. 5 Stars: Passed independent security review. === Coverity scan === Coverity in collaboration with Stanford University has established a new baseline for open-source quality and security. The development is being completed through a contract with the Department of Homeland Security. They are utilizing innovations in automated defect detection to identify critical types of bugs found in software. The level of quality and security is measured in rungs. Rungs do not have a definitive meaning, and can change as Coverity releases new tools. Rungs are based on the progress of fixing issues found by the Coverity Analysis results and the degree of collaboration with Coverity. They start with Rung 0 and currently go up to Rung 2. Rung 0 The project has been analyzed by Coverity's Scan infrastructure, but no representatives from the open-source software have come forward for the results. Rung 1 At rung 1, there is collaboration between Coverity and the development team. The software is analyzed with a subset of the scanning features to prevent the development team from being overwhelmed. Rung 2 There are 11 projects that have been analyzed and upgraded to the status of Rung 2 by reaching zero defects in the first year of the scan. These projects include: AMANDA, ntp, OpenPAM, OpenVPN, Overdose, Perl, PHP, Postfix, Python, Samba, and Tcl.

  Read more →
• 

  Stencil buffer

  A stencil buffer is an extra data buffer, in addition to the color buffer and Z-buffer, found on modern graphics hardware. The buffer is per pixel and works on integer values, usually with a depth of one byte per pixel. The Z-buffer and stencil buffer often share the same area in the RAM of the graphics hardware. In the simplest case, the stencil buffer is used to limit the area of rendering (stenciling). More advanced usage of the stencil buffer makes use of the strong connection between the Z-buffer and the stencil buffer in the rendering pipeline. For example, stencil values can be automatically increased/decreased for every pixel that fails or passes the depth test. The simple combination of depth test and stencil modifiers make a vast number of effects possible (such as stencil shadow volumes, Two-Sided Stencil, compositing, decaling, dissolves, fades, swipes, silhouettes, outline drawing, or highlighting of intersections between complex primitives) though they often require several rendering passes and, therefore, can put a heavy load on the graphics hardware. The most typical application is still to add shadows to 3D applications. It is also used for planar reflections. Other rendering techniques, such as portal rendering, use the stencil buffer in other ways; for example, it can be used to find the area of the screen obscured by a portal and re-render those pixels correctly. The stencil buffer and its modifiers can be accessed in computer graphics by using APIs like OpenGL, Direct3D, Vulkan or Metal. == Architecture == The stencil buffer typically shares the same memory space as the Z-buffer, and typically the ratio is 24 bits for Z-buffer + 8 bits for stencil buffer or, in the past, 15 bits for Z-buffer + 1 bit for stencil buffer. Another variant is 4 + 24, where 28 of the 32 bits are used and 4 ignored. Stencil and Z-buffers are part of the frame buffer, coupled to the color buffer. The first chip available to a wider market was 3Dlabs' Permedia II, which supported a one-bit stencil buffer. The bits allocated to the stencil buffer can be used to represent numerical values in the range [0, 2n-1], and also as a Boolean matrix (n is the number of allocated bits), each of which may be used to control the particular part of the scene. Any combination of these two ways of using the available memory is also possible. == Stencil test == Stencil test or stenciling is among the operations on the pixels/fragments (Per-pixel operations), located after the alpha test, and before the depth test. The stencil test ensures undesired pixels do not reach the depth test. This saves processing time for the scene. Similarly, the alpha test can prevent corresponding pixels to reach the stencil test. The test itself is carried out over the stencil buffer to some value in it, or altered or used it, and carried out through the so-called stencil function and stencil operations. The stencil function is a function by which the stencil value of a certain pixel is compared to a given reference value. If this comparison is logically true, the stencil test passes. Otherwise not. In doing so, the possible reaction caused by the result of comparing three different state-depth and stencil buffer: Stencil test is not passed Stencil test is passed but not the depth test Both tests are passed (or stencil test is passed, and the depth is not enabled) For each of these cases, different operations can be set over the examined pixel. In the OpenGL stencil functions, the reference value and mask, respectively, define the function glStencilFunc. In Direct3D each of these components is adjusted individually using methods SetRenderState devices currently in control. This method expects two parameters, the first of which is a condition that is set and the other its value. In the order that was used above, these conditions are called D3DRS_STENCILFUNC, D3DRS_STENCILREF, and D3DRS_STENCILMASK. Stencil operations in OpenGL adjust glStencilOp function that expects three values. In Direct3D, again, each state sets a specific method SetRenderState. The three states that can be assigned to surgery are called D3DRS_STENCILFAIL, D3DRENDERSTATE_STENCILZFAIL, and D3DRENDERSTATE_STENCILPASS. == Z-fighting == Due to the lack of precision in the Z-buffer, coplanar polygons that are short-range, or overlapping, can be portrayed as a single plane with a multitude of irregular cross-sections. These sections can vary depending on the camera position and other parameters and are rapidly changing. This is called Z-fighting. There exist multiple solutions to this issue: - Bring the far plane closer to restrict the scene's depth, thus increasing the accuracy of the Z-buffer, or reducing the distance at which objects are visible in the scene. - Increase the number of bits allocated to the Z-buffer, which is possible at the expense of memory for the stencil buffer. - Move polygons farther apart from one another, which restricts the possibilities for the artist to create an elaborate scene. All of these approaches to the problem can only reduce the likelihood that the polygons will experience Z-fighting, and do not guarantee a definitive solution in the general case. A solution that includes the stencil buffer is based on the knowledge of which polygon should be in front of the others. The silhouette of the front polygon is drawn into the stencil buffer. After that, the rest of the scene can be rendered only where the silhouette is negative, and so will not clash with the front polygon. == Shadow volume == Shadow volume is a technique used in 3D computer graphics to add shadows to a rendered scene. They were first proposed by Frank Crow in 1977 as the geometry describing the 3D shape of the region occluded from a light source. A shadow volume divides the virtual world in two: areas that are in shadow and areas that are not. The stencil buffer implementation of shadow volumes is generally considered among the most practical general-purpose real-time shadowing techniques for use on modern 3D graphics hardware. It has been popularised by the video game Doom 3, and a particular variation of the technique used in this game has become known as Carmack's Reverse. == Reflections == Reflection of a scene is drawn as the scene itself transformed and reflected relative to the "mirror" plane, which requires multiple render passes and using of stencil buffer to restrict areas where the current render pass works: Draw the scene excluding mirror areas – for each mirror lock the Z-buffer and color buffer Render visible part of the mirror Depth test is set up so that each pixel is passed to enter the maximum value and always passes for each mirror: Depth test is set so that it passes only if the distance of a pixel is less than the current (default behavior) The matrix transformation is changed to reflect the scene relative to the mirror plane Unlock the Z-buffer and color buffer Draw the scene, but only the part of it that lies between the mirror plane and the camera. In other words, a mirror plane is also a clipping plane Again locks color buffer, depth test is set so that it always passes, reset stencil for the next mirror. == Planar Shadows == While drawing a plane of shadows, there are two dominant problems: The first concerns the problem of deep struggle in case the flat geometry is not awarded on the part covered with the shadow of shadows and outside. See the section that relates to this. Another problem relates to the extent of the shadows outside the area where the plane there. Another problem, which may or may not appear, depending on the technique, the design of more polygons in one part of the shadow, resulting in darker and lighter parts of the same shade. All three problems can be solved geometrically, but because of the possibility that hardware acceleration is directly used, it is a far more elegant implementation using the stencil buffer: 1. Enable lights and the lights 2. Draw a scene without any polygon that should be projected shadows 3. Draw all polygons which should be projected shadows, but without lights. In doing so, the stencil buffer, the pixel of each polygon to be assigned to a specific value for the ground to which they belong. The distance between these values should be at least two, because for each plane to be used two values for two states: in the shadows and bright. 4. Disable any global illumination (to ensure that the next steps will affect only individual selected light) For each plane: For each light: 1. Edit a stencil buffer and only the pixels that carry a specific value for the selected level. Increase the value of all the pixels that are projected objects between the date of a given level and bright. 2. Allow only selected light for him to draw level at which part of her specific value was not changed. == Spatial shadows == Stencil buffer implementation of spatial drawing shadows is any shadow of a geometric body that its volume includes part of the scene that is

  Read more →
• 

  Hi uTandem

  Hi uTandem, also known as uTandem, is a free language exchange mobile app. It helps people to connect with other language learners in order to carry out face-to-face language exchange sessions and also offers learners lists of businesses in the field of language learning or language exchange. == Use == Hi uTandem is built around the concept of language exchange, which is a method of language learning based on mutual oral linguistic exchange between partners. Ideally, each partner is a native speaker of the language they are helping their counterpart to learn. The app designed for users to chat with other users and translate messages, find suitable language partners and to locate language schools, bars, cafés and language exchange groups around them. == Team and development == Hi uTandem was released in January, 2016. The initial idea was conceived by Alberto Rodríguez as part of a team of eight Spanish youngsters. Hi uTandem belongs to the company Velvor Tech S.L., founded by the same members and registered in Ronda (Spain). == Reception == Hi uTandem was listed on the Top 4 Apps to Learn Languages list by ElPlural.com and since its launch it has been featured in numerous online and physical sources, including 20 minutos, Europapress, ABC Andalucía and Telefónica's Think Big Blog.

  Read more →
• 

  TeaOnHer

  TeaOnHer is a male-oriented dating surveillance mobile app that allows men to anonymously rate and comment on women they are dating. It was set up in response to the existence of Tea, a female-oriented dating app that allowed women to rate and comment on men. In 2025, Cosmopolitian magazine described it as America's second most popular mobile app, with it being the second most popular app in the lifestyle section of Apple's App Store. The TeaOnHer app has fewer features than the rival Tea app, focusing instead on anonymous commenting. It is listed as having been developed by a company called Newville Media Corporation. TechCrunch reported in 2025 that TeaOnHer had leaked credentials of some of its users.

  Read more →
• 

  Automated penetration testing

  Automated penetration testing (also known as autonomous penetration testing or automated offensive security) is the application of software-driven workflows and orchestration to simulate cyberattack techniques. These methods are used to identify, validate, and exploit security vulnerabilities in IT assets such as networks, applications, and cloud infrastructure. Automated penetration testing is the use of software to simulate cyberattacks in order to rapidly identify exploitable vulnerabilities across systems without relying solely on human testers. In technical literature, the term describes a spectrum of activities ranging from scripted exploit orchestration to experimental systems designed for fully autonomous attack planning. Automated Penetration Testing falls short of testing using manual experts in terms of discovery of deep complex vulnerabilities and contextual business logic vulnerabilities. == Terminology and scope == The label “automated penetration testing” appears frequently in vendor and practitioner writing but lacks a single, neutral, standards-based definition. In the literature the term’s scope varies: some authors use it to mean automation of specific penetration-testing tasks (scanning, exploitation attempts, evidence collection), others to describe integrated, repeatable assessment pipelines, and a smaller body of work investigates autonomous decision-making agents that select attack steps algorithmically. To avoid implying consensus, this article describes common techniques and architectures reported in the literature and industry, and it notes where claims are primarily found in practitioner publications or early-stage research. Its important to note the differences between automated penetration testing and traditional penetration testing using human skill. The most important difference is scope and speed. Automated penetration testing generally fails at discovering exposures and weakness associated with business logic due to a lack of contextual understanding. The benefit of Automated Penetration testing is speed at which it can be conducted. Traditional penetration testing also is expected to be accurate and contain no false positives. This is due to the human validation aspect of the test. Automated approaches are expected to contain mistakes and false positives which need to be validated upon completion of the test. == History == Automated offensive techniques build on decades of tools and scripting that aided vulnerability discovery and exploitation. Early vulnerability scanners and community scripting in the 1990s and 2000s created the first layers of automation. Later, modular exploitation frameworks (notably Metasploit) integrated scanning and exploitation modules and made automated proof-of-concept attacks more accessible. Over the 2010s–2020s, as cloud platforms, APIs and continuous delivery practices increased the need for frequent validation, academic and industry interest in formalizing automated approaches also grew. == Methodologies and architectures == Descriptions in the literature and technical reports cluster automated capabilities into several overlapping models: Scripted/engineered playbooks (task automation): Predefined workflows or playbooks encode common attack paths (for example, web application exploit sequences or lateral-movement chains). These playbooks are designed to reproduce known techniques in a controlled way to validate exploitability and reduce manual repetition. Exploit-oriented orchestration: Automation orchestrates exploitation modules from established frameworks to perform controlled proof-of-concept attacks that confirm exploitability rather than simply flagging potential weaknesses. This approach can reduce false positives versus passive scanning when tests are run in an appropriately controlled environment. Orchestrated multi-tool pipelines: A coordinated toolchain integrates reconnaissance, vulnerability scanning, credential testing, exploitation modules and reporting. Data and state persist across stages so that multi-step workflows (e.g., discover → escalate → pivot) can be executed repeatably, approximating manual penetration-test methodologies at larger scale. Continuous / CI-integrated testing: Automation embedded in build or deployment pipelines (CI/CD) triggers assessments automatically on new builds, configuration changes, or on a schedule, supporting frequent, repeatable validation aligned with DevOps practices. Academic theses and experimental work describe CI/CD-integrated proof-of-concept systems for web applications and internal networks. Research on autonomous planning and learning: Recent academic work explores machine learning and reinforcement-learning approaches to select or prioritise attack steps, generate attack sequences, or optimize the testing path; these approaches are largely experimental and raise distinct validation and safety questions. == Tools and vendors == Automated penetration testing is provided by a mix of open-source projects, commercial platforms, and professional services. These often follow the penetration testing as a service (PTaaS) model, which integrates automated scanning with manual validation by security analysts. Examples of widely known tools and vendors in the space include exploitation frameworks such as Metasploit, commercial automated platforms and PTaaS providers, and specialist vendors that offer breach-and-attack simulation (BAS) or continuous testing capabilities. == Applications and deployment models == In industry practice, some organizations deploy automated techniques through dedicated security validation platforms rather than bespoke toolchains. These platforms are typically used for continuous or scheduled validation in pre-production or controlled environments and are often positioned alongside, rather than in place of, human-led penetration testing. Examples discussed in secondary literature include platforms such as Pentera, which are commonly classified under breach-and-attack simulation or automated security validation rather than as standalone penetration-testing methodologies.

  Read more →
• 

  Imo.im

  imo.im is a proprietary audio/video calling and instant messaging software service. It allows sending music, video, PDFs and other files, along with various free stickers. It supports encrypted group video and voice calls with up to 20 participants. According to its developer, the service possesses over 200 million users and over 50 million messages per day are sent through it. == History == The product was created as a web-based application in 2005 for accessing multiple chat platforms, including Facebook Messenger, Google Talk, Yahoo! Messenger, and Skype chat. It was developed by Pagebites, which is a subsidiary of Singularity IM, Inc. and required a subscriber's phone number to verify the users' account. In March 2014, support for all third-party messaging networks ended. In January 2018, the app reached 500 million installs. imo.im has implemented end-to-end encryption for its chats and calls, ensuring that the conversations remain private between the sender and receiver.

  Read more →