AI Chat Hpt

AI Chat Hpt — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Stixel

  In computer vision, a stixel (portmanteau of "stick" and "pixel") is a superpixel representation of depth information in an image, in the form of a vertical stick that approximates the closest obstacles within a certain vertical slice of the scene. Introduced in 2009, stixels have applications in robotic navigation and advanced driver-assistance systems, where they can be used to define a representation of robotic environments and traffic scenes with a medium level of abstraction. == Definition == One of the problems of scene understanding in computer vision is to determine horizontal freespace around the camera, where the agent can move, and the vertical obstacles delimiting it. An image can be paired with depth information (produced e.g. from stereo disparity, lidar, or monocular depth estimation), allowing a dense tridimensional reconstruction of the observed scene. One drawback of dense reconstruction is the large amount of data involved, since each pixel in the image is mapped to an element of a point cloud. Vision problems characterised by planar freespace delimited by mostly vertical obstacles, such as traffic scenes or robotic navigation, can benefit from a condensed representation that allows to save memory and processing time. Stixels are thin vertical rectangles representing a slice of a vertical surface belonging to the closest obstacle in the observed scene. They allow to dramatically reduce the amount of information needed to represent a scene in such problems. A stixel is characterised by three parameters: vertical coordinate of the bottom, height of the stick, and depth. Stixels have fixed width, with each stixel spanning over a certain number of image columns, allowing downsampling of the horizontal image resolution. In the original formulation, each column of the image would contain at most one stixel, and later extensions were developed to allow multiple stixels on each column, allowing to represent multiple objects at different distances. == Stixel estimation == The input to stixel estimation is a dense depth map, that can be computed from stereo disparity or other means. The original approach computes an occupancy grid that can be segmented to estimate the freespace, with dynamic programming providing an efficient method to find an optimal segmentation. Alternative approaches can be used instead of occupancy grid mapping, such as manifold-based methods. The freespace boundary provides the base points of the obstacles at closest longitudinal distance, however multiple objects at different distances might appear in each column of the image. To fully define the obstacles, their height should be estimated, and this is accomplished by segmenting the depth of the object from the depth of the background. A membership function over the pixels can be defined based on the depth value, where the membership represents the confidence of a pixel belonging to the closest vertical obstacle or to the background, and a cut separating the obstacles from the background can again be computed effectively with dynamic programming. Once both the freespace and the obstacle height are known, the stixels can be estimated by fusing the information over the columns spanned by each stixel, and finally a refined depth of the stixel can be estimated via model fitting over the depth of the pixels covered by the stixel, possibly paired with confidence information (e.g. disparity confidence produced by methods such as semi-global matching).

  Read more →
• 

  Imo.im

  imo.im is a proprietary audio/video calling and instant messaging software service. It allows sending music, video, PDFs and other files, along with various free stickers. It supports encrypted group video and voice calls with up to 20 participants. According to its developer, the service possesses over 200 million users and over 50 million messages per day are sent through it. == History == The product was created as a web-based application in 2005 for accessing multiple chat platforms, including Facebook Messenger, Google Talk, Yahoo! Messenger, and Skype chat. It was developed by Pagebites, which is a subsidiary of Singularity IM, Inc. and required a subscriber's phone number to verify the users' account. In March 2014, support for all third-party messaging networks ended. In January 2018, the app reached 500 million installs. imo.im has implemented end-to-end encryption for its chats and calls, ensuring that the conversations remain private between the sender and receiver.

  Read more →
• 

  Non-photorealistic rendering

  Non-photorealistic rendering (NPR) is an area of computer graphics that focuses on enabling a wide variety of expressive styles for digital art, in contrast to traditional computer graphics, which focuses on photorealism. NPR is inspired by other artistic modes such as painting, drawing, technical illustration, and animated cartoons. NPR has appeared in movies and video games in the form of cel-shaded animation (also known as "toon" shading) as well as in scientific visualization, architectural illustration and experimental animation. == History and criticism of the term == The term non-photorealistic rendering is believed to have been coined by the SIGGRAPH 1990 papers committee, who held a session entitled "Non Photo Realistic Rendering". The term has received some criticism: The term "photorealism" has different meanings for graphics researchers (see "photorealistic rendering") and artists. For artists—who are the target consumers of NPR techniques—it refers to a school of painting that focuses on reproducing the effect of a camera lens, with all the distortion and hyper-reflections that it creates. For graphics researchers, however, it refers to an image that is visually indistinguishable from reality. In fact, graphics researchers lump the kinds of visual distortions that are used by photorealist painters into "non-photorealism". Describing something by what it is not is problematic. Equivalent (made-up) comparisons might be "non-elephant biology" or "non-geometric mathematics". NPR researchers have stated that they expect the term will disappear eventually and be replaced by the now more general term "computer graphics", with "photorealistic graphics" being the term used to describe "traditional" computer graphics. Many techniques that are used to create 'non-photorealistic' images are not rendering techniques. They are modelling techniques, or post-processing techniques. While the latter are coming to be known as 'image-based rendering', sketch-based modelling techniques, cannot technically be included under this heading, which is very inconvenient for conference organisers. The first conference on non-photorealistic animation and rendering included a discussion of possible alternative names. Among those suggested were "expressive graphics", "artistic rendering", "non-realistic graphics", "art-based rendering", and "psychographics". All of these terms have been used in various research papers on the topic, but the "non-photorealistic" term seems to have nonetheless taken hold. The first technical meeting dedicated to NPR was the ACM-sponsored Symposium on Non-Photorealistic Rendering and Animation(NPAR) in 2000. NPAR is traditionally co-located with the Annecy Animated Film Festival, running on even numbered years. From 2007 onward, NPAR began to also run on odd-numbered years, co-located with ACM SIGGRAPH. == 3D == Three-dimensional NPR is the style that is most commonly seen in video games and movies. The output from this technique is almost always a 3D model that has been modified from the original input model to portray a new artistic style. In many cases, the geometry of the model is identical to the original geometry, and only the material applied to the surface is modified. With increased availability of programmable GPU's, shaders have allowed NPR effects to be applied to the rasterised image that is to be displayed to the screen. The majority of NPR techniques applied to 3D geometry are intended to make the scene appear two-dimensional. NPR techniques for 3D images include cel shading and Gooch shading. Many methods can be used to draw stylized outlines and strokes from 3D models, including occluding contours and Suggestive contours. For enhanced legibility, the most useful technical illustrations for technical communication are not necessarily photorealistic. Non-photorealistic renderings, such as exploded view diagrams, greatly assist in showing placement of parts in a complex system. Cartoon rendering, also called cel shading or toon shading, is a non-photorealistic rendering technique used to give 3D computer graphics a flat, cartoon-like appearance. Its defining feature is the use of distinct shading colors rather than smooth gradients, producing a look reminiscent of comic books or animated films. This technique is often used to blend 3D objects and environments with 2D hand-animated elements while maintaining a consistent look. Treasure Planet movie by Disney is an example of blending these techniques. == 2D == The input to a two dimensional NPR system is typically an image or video. The output is a typically an artistic rendering of that input imagery (for example in a watercolor, painterly or sketched style) although some 2D NPR serves non-artistic purposes e.g. data visualization. The artistic rendering of images and video (often referred to as image stylization) traditionally focused upon heuristic algorithms that seek to simulate the placement of brush strokes on a digital canvas. Arguably, the earliest example of 2D NPR is Paul Haeberli's 'Paint by Numbers' at SIGGRAPH 1990. This (and similar interactive techniques) provide the user with a canvas that they can "paint" on using the cursor — as the user paints, a stylized version of the image is revealed on the canvas. This is especially useful for people who want to simulate different sizes of brush strokes according to different areas of the image. Subsequently, basic image processing operations using gradient operators or statistical moments were used to automate this process and minimize user interaction in the late nineties (although artistic control remains with the user via setting parameters of the algorithms). This automation enabled practical application of 2D NPR to video, for the first time in the living paintings of the movie What Dreams May Come (1998). More sophisticated image abstractions techniques were developed in the early 2000s harnessing computer vision operators e.g. image salience, or segmentation operators to drive stroke placement. Around this time, machine learning began to influence image stylization algorithms notably image analogy that could learn to mimic the style of an existing artwork. The advent of deep learning has re-kindled activity in image stylization, notably with neural style transfer (NST) algorithms that can mimic a wide gamut of artistic styles from single visual examples. These algorithms underpin mobile apps capable of the same e.g. Prisma In addition to the above stylization methods, a related class of techniques in 2D NPR address the simulation of artistic media. These methods include simulating the diffusion of ink through different kinds of paper, and also of pigments through water for simulation of watercolor. == Artistic rendering == Artistic rendering is the application of visual art styles to rendering. For photorealistic rendering styles, the emphasis is on accurate reproduction of light-and-shadow and the surface properties of the depicted objects, composition, or other more generic qualities. When the emphasis is on unique interpretive rendering styles, visual information is interpreted by the artist and displayed accordingly using the chosen art medium and level of abstraction in abstract art. In computer graphics, interpretive rendering styles are known as non-photorealistic rendering styles, but may be used to simplify technical illustrations. Rendering styles that combine photorealism with non-photorealism are known as hyperrealistic rendering styles. == Notable films and games == This section lists some seminal uses of NPR techniques in films, games and software. See cel-shaded animation for a list of uses of toon-shading in games and movies.

  Read more →
• 

  Puck App

  Puck App is a mobile application that allows hockey players to quickly find and rent a hockey goalie. Founded in 2015 in Toronto, the application primarily operates throughout Canada. It is available on Apple's App Store and Google Play. == History == Puck App was founded in 2016 by Niki Sawni. Users can rate the goalies, message with available goalies, and coordinate skill levels. In 2017, Puck App expanded to Western Canada and has over 1,000 goalies registered. In 2018, Puck App charged approximately $40 CDN to rent a goalie with more than 2 hours notice. Previously, Puck App was a competitor to a similar application called GoalieUp. As of 2024, both companies have agreed to a merger deal.

  Read more →
• 

  GPTs

  GPTs are custom versions of ChatGPT with added instructions and extra knowledge. GPTs can be used and created from the GPT Store. Any user can easily create them without any programming knowledge. GPTs can be tailored for specific writing styles, topics, or tasks. The ability to create GPTs was introduced in November 2023, and by January 2024, more than 3 million GPTs had been published. == Features and uses == GPTs can be configured to answer complex questions in specific fields, solve problems, provide image-based information, or create digital content. They can be programmed as educational tools, purchasing guides, or technical advisors, as well as for many others applications. GPTs are accessed from the GPT Store section of the ChatGPT web page. The “Explore GPT” link opens the store where the most popular GPTs in each section are highlighted. The GPTs are organized by categories. The store also uses a rating system based on user experiences similar to that used by other app stores such as Apple's App Store or Google Play. Those with the best ratings appear at the top of each category. According to La Vanguardia, the most popular categories are: Personal assistants Learning to program Image generation Creative writing Gaming Entertainment It is expected that in the future the creators of GPTs will be able to monetize them. Companies like Moderna are using GPTs to assist in various specific business tasks. The company has created 750 GPTs for its own internal use. == Configuration == Creating GPTs does not require prior programming knowledge. Free users can use existing GPTs but cannot create their own. Paying subscribers can use the editor on the ChatGPT site to configure the GPT's name, image and description, instructions and access to APIs, along with visibility options. == Criticism == The implementation and use of GPTs has not been without criticism. The GPT Store has been criticized for the proliferation of low-quality GPTs and spam due to a lack of effective moderation. There are also concerns about data privacy and security, as GPTs may collect and use personal information in ways that are not always transparent to users.

  Read more →
• 

  Patch management

  Patch management (or patch management policy or patch policy or patch management process) is concerned with the identification, acquisition, distribution, testing and installation of patches to systems. Proper patch management can be a net productivity boost for an organization. Patches can be used to defend against and eliminate potential vulnerabilities of a system, so that no threats may exploit them. Problems can arise during patch management, including buggy patches that either fail to fix their problem or introduce new issues. Patch management tools help orchestrate all of the procedures involved in patch management. == Description == Patch management is defined as a sub-practice of various disciplines including vulnerability management (part of security management), lifecycle management (with further possible sub-classification into application lifecycle management and release management), change management, and systems management. The practice is broadly concerned with the identification, acquisition, distribution, and installation of patches to systems. Some definitions of patch management are as a software-level practice, while others are as a systems-level process: software, drivers, and firmware. == Cost–benefit analysis == While reserving time for patching takes up enterprise resources, there are balancing factors which can make proper patch management into a net productivity boost for an organization. Up-to-date systems often perform more efficiently, less costly, with less errors, less security risks, and better user workflow. Additionally, compliance with changing local and federal regulations are more likely to be satisfied. Patching security vulnerabilities has been one among many competing priorities for organizations, leading to longer periods before patching for some organizations. Equifax was too slow to implement its 2015 patch management plan to be able to mitigate or prevent the 2017 Equifax data breach, leading to scrutiny from regulators. == Relation to security management == Patches can be used to defend against and eliminate potential vulnerabilities of a system, so that no threats may exploit them; therefore, patch management can be considered a sub-discipline of vulnerability management. Every patchable device in a system presents an attack surface that must be secured. === Time plan === Automatic updates are where the patch is applied automatically with little to know actions or planning required. This approach is recommended for many individuals and organizations. Some organizations also have to prioritize which patches to prioritize given limited resources. Patch Tuesday is the most common process when major companies like Microsoft and Adobe release patches on a known date so that companies can plan resources around implementing the patches more quickly. Linux is open-sourced and patches can be released at any time, leading some to rely on mailing lists or other ways to be alerted to updates. === Inventory === Taking an inventory of software and hardware, including versions can make it easier to correlate with bugs or patches as they become known. Taking stock of how much education and support others in an organization need to install their patches can also help for planning how to implement the patch or design systems to begin with. Streamlining the process by using tools that can communicate with each other can also help to reduce the time of exposure to known vulnerabilities. == Challenges == There are a multitude of problems that can arise during patch management. A common issue is buggy patches, which either fail to fix their problem or introduce new issues. Another issue is deployment synchronization, since various subsystems may receive instructions to update at different times. Similarly, the difficulty of patch management across many devices may grow at an uncontrollable rate depending on organizational size. One prominent demonstration of the challenges facing proper patch management was the buggy Falcon Sensor patch by CrowdStrike which caused one of the worst IT outages of all time. == Implementations == A patch management tool (alternatively patch manager, patch management system, patch management software, or centralized patch management) help orchestrate all of the procedures involved in patch management. Tools can be in-house (applied locally by local administrators), or external, as with managed service providers (applied externally by a provider). === Patch management software === Windows Update for Business, System Center Configuration Manager, and Windows Server Update Services offer control over patch deployment, with features enabling testing, scheduling updates, and setting custom configurations on Windows platforms. === Managed service providers === == Regulatory requirements (United States) == Timely patching of software vulnerabilities is a requirement under multiple regulatory frameworks in the United States. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to protect electronic protected health information by implementing security measures sufficient to reduce risks to a reasonable and appropriate level, which industry guidance has long interpreted to include timely patch management. A proposed new HIPAA Security Rule would make patch management requirements explicit, mandating that covered entities and business associates deploy security patches and updates within a defined risk-based timeline and maintain written procedures for prioritizing, testing, and applying patches to systems that store, process, or transmit ePHI. The 2025 proposal continues to receive industry pushback as of December 2025. HIPAA was last updated in 2013. The Payment Card Industry Data Security Standard (PCI DSS) requires organizations to protect system components from known vulnerabilities by installing applicable security patches within one month of release for critical patches. The Cybersecurity and Infrastructure Security Agency (CISA) maintains a Known Exploited Vulnerabilities (KEV) catalog that compels U.S. federal agencies to remediate listed vulnerabilities within specified timelines. Agencies are typically required to patch within 3 weeks, though some vulnerabilities must be fixed within 24 hours.

  Read more →
• 

  List of monochrome and RGB color formats

  This list of monochrome and RGB palettes includes generic repertoires of colors (color palettes) to produce black-and-white and RGB color pictures by a computer's display hardware. RGB is the most common method to produce colors for displays; so these complete RGB color repertoires have every possible combination of R-G-B triplets within any given maximum number of levels per component. Each palette is represented by a series of color patches. When the number of colors is low, a 1-pixel-size version of the palette appears below it, for easily comparing relative palette sizes. Huge palettes are given directly in one-color-per-pixel color patches. For each unique palette, an image color test chart and sample image (truecolor original follows) rendered with that palette (without dithering) are given. The test chart shows the full 256 levels of the red, green, and blue (RGB) primary colors and cyan, magenta, and yellow complementary colors, along with a full 256-level grayscale. Gradients of RGB intermediate colors (orange, lime green, sea green, sky blue, violet, and fuchsia), and a full hue spectrum are also present. Color charts are not gamma corrected. These elements illustrate the color depth and distribution of the colors of any given palette, and the sample image indicates how the color selection of such palettes could represent real-life images. These images are not necessarily representative of how the image would be displayed on the original graphics hardware, as the hardware may have additional limitations regarding the maximum display resolution, pixel aspect ratio and color placement. Implementation of these formats is specific to each machine. Therefore, the number of colors that can be simultaneously displayed in a given text or graphic mode might be different. Also, the actual displayed colors are subject to the output format used - PAL or NTSC, composite or component video, etc. - and might be slightly different. For simulated images and specific hardware and alternate methods to produce colors other than RGB (ex: composite), see the List of 8-bit computer hardware palettes, the List of 16-bit computer hardware palettes and the List of video game console palettes. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit color depth displays, see the List of software palettes. == Monochrome palettes == These palettes only have some shades of gray, from black to white (considered the darkest and lightest "grays", respectively). The general rule is that those palettes have 2n different shades of gray, where n is the number of bits needed to represent a single pixel. === Monochrome (1-bit grayscale) === Monochrome graphics displays typically have a black background with a white or light gray image, though green and amber monochrome monitors were also common. Such a palette requires only one bit per pixel. Where photo-realism was desired, these early computer systems had a heavy reliance on dithering to make up for the limits of the technology. In some systems, as Hercules and CGA graphic cards for the IBM PC, a bit value of 1 represents white pixels (light on) and a value of 0 the black ones (light off); others, like the Playdate and Atari ST and Apple Macintosh with monochrome monitors, a bit value of 0 means a white pixel (no ink) and a value of 1 means a black pixel (dot of ink), which it approximates to the printing logic. === 2-bit Grayscale === In a 2-bit color palette each pixel's value is represented by 2 bits resulting in a 4-value palette (22 = 4). 2-bit dithering: It has black, white and two intermediate levels of gray as follows: A monochrome 2-bit palette is used on: The Monochrome Display Adapter for the IBM PC NeXT Computer, NeXTcube and NeXTstation monochrome graphic displays. Original Game Boy system portable video game console. Macintosh PowerBook 150 monochrome LC displays. Amiga with A2024 monochrome monitor in high-resolution mode. The original Amazon Kindle The original WonderSwan The Tiger Electronics Game.com portable video game console The original Neo Geo Pocket. === 4-bit Grayscale === In a 4-bit color palette each pixel's value is represented by 4 bits resulting in a 16-value palette (24 = 16): 4-bit grayscale dithering does a fairly good job of reducing visible banding of the level changes: A monochrome 4-bit palette is used on: MOS Technology VDC (on the Commodore 128 with monochrome monitor) Amstrad CPC series with a GT64/GT65 Green Monitor (16 unique green shades) Amstrad CPC Plus series with the MM12 Monochrome monitor (16 shades of grey) Some Apple PowerBooks equipped with monochrome displays like the PowerBook 5300 The original VideoNow === 8-bit Grayscale === In an 8-bit color palette each pixel's value is represented by 8 bits resulting in a 256-value palette (28 = 256). This is usually the maximum number of grays in ordinary monochrome systems; each image pixel occupies a single memory byte. Most scanners can capture images in 8-bit grayscale, and image file formats like TIFF and JPEG natively support this monochrome palette size. Alpha channels employed for video overlay also use (conceptually) this palette. The gray level indicates the opacity of the blended image pixel over the background image pixel. == Dichrome palettes == === 16-bit RG palette === The RG or red–green color space is a color space that uses only two primary colors: red and green. It was used on early color processes for films. It was used as an additive format, similar to the RGB color model but without a blue channel, on processes such as Kinemacolor, Prizma, Technicolor I, Raycol, etc., producing shades of black, red, green and yellow. Alternatively, it was used as a subtractive format on Brewster Color I, Kodachrome I, Prizma II, Technicolor II, etc., producing shades of transparent, red, green and black. Until recently, its primary use was in low-cost light-emitting diode displays in which red and green tended to be far more common than the still nascent blue LED technology, but full-color LEDs with blue have become more common in recent years. ColorCode 3-D, a anaglyph stereoscopic color scheme, uses the RG color space to simulate a broad spectrum of color in one eye, while the blue portion of the spectrum transmits a black-and-white (black-and-blue) image to the other eye to give depth perception. === 16-bit RB palette === === 16-bit GB palette === == Regular RGB palettes == Here are grouped those full RGB hardware palettes that have the same number of binary levels (i.e., the same number of bits) for every red, green and blue components using the full RGB color model. Thus, the total number of colors are always the number of possible levels by component, n, raised to a power of 3: n×n×n = n3. === 3-bit RGB === 3-bit RGB dithering: Systems with a 3-bit RGB palette use 1 bit for each of the red, green and blue color components. That is, each component is either "on" or "off" with no intermediate states. This results in an 8-color palette ((21)3 = 23 = 8) that has black, white, the three RGB primary colors red, green and blue and their correspondent complementary colors cyan, magenta and yellow as follows: The color indices vary between implementations; therefore, index numbers are not given. The 3-bit RGB palette is used by: Text terminals following the ECMA-48 standard (sometimes known as the "ANSI standard", although ANSI X3.128 does not define colors) World System Teletext Level 1/1.5 Videotex Oric computers BBC Micro PC-8801 (up to the MkII) PC-9801 (with original 8086 CPU, before the VM/VX models) Sharp X1 (models before the X1 Turbo Z) Sharp MZ 700 FM-7, FM New 7, FM 77 (before the FM77AV) Sinclair QL Space Invaders Part II (arcade hardware) Macintosh SE (with a color printer or external monitor) Atari 2600 (SECAM version) Color Maximite (PIC32 based microcomputer) Arcadia 2001 PV-1000 Monkey Magic (arcade hardware) VIC-20 (high-res mode) Mouse Trap (arcade hardware) Sanyo MBC-550 series Windows 1.0 (includes dithering) === 6-bit RGB === Systems with a 6-bit RGB palette use 2 bits for each of the red, green, and blue color components. This results in a (22)3 = 43 = 64-color palette as follows: 6-bit RGB systems include the following: Enhanced Graphics Adapter (EGA) for IBM PC/AT (16 colors at once) Sega Master System video game console (32 colors at once) GIME for TRS-80 Color Computer 3 (16 colors at once) Pebble Time smartwatch which has a 6-bit (64 color) e-paper display Parallax Propeller using the reference VGA circuit === 9-bit RGB === Systems with a 9-bit RGB palette use 3 bits for each of the red, green, and blue color components. This results in a (23)3 = 83 = 512-color palette as follows: 9-bit RGB systems include the following: Atari ST (Normally 4 to 16 at once without tricks) MSX2 computers (up to 16 at once) Sega Genesis video game console, (64 colors at once) Sega Nomad TurboGrafx-16 (NEC PC-Engine) ZX Spectrum Next The NEC PC-88

  Read more →
• 

  Tuber (app)

  Tuber (Chinese: Tuber浏览器) was a web browser mobile app developed by Shanghai Fengxuan Information Technology that allowed users within mainland China to view filtered versions of certain websites normally blocked by the Great Firewall. Filtered versions of websites such as Google, Facebook, Instagram, YouTube, Twitter, Netflix, IMDb, and Wikipedia could be viewed. The app was backed by cybersecurity company Qihoo 360 which served as the parent company. The app required phone number registration. Sensitive keywords were blocked by the app. On October 9, 2020, Global Times editor Rita Bai Yunyi tweeted that the move represented "a great step for China's opening up". The app was removed from China domestic app stores and operations ceased as of October 10, 2020. On October 12, when questioned by a Bloomberg News reporter on the topic, Foreign Ministry spokesperson Zhao Lijian replied, "This is not a diplomatic issue, and I do not have the relevant information you mentioned. China has always managed the Internet in accordance with the law. I suggest you ask the competent department for the specific situation."

  Read more →
• 

  Pill reminder

  A pill reminder is any device that reminds users to take medications. Traditional pill reminders are pill containers with electric timers attached, which can be preset for certain times of the day to set off an alarm. More sophisticated pill reminders can also detect when they have been opened, and therefore when the user is away during the time they were supposed to take their medication, they will be reminded of it when they return. This reminder can be in the form of a light, which also helps for deaf or hearing-impaired users. == Mobile app == A newer type of pill reminder is a mobile app that reminds the owner to take the medication. Some of these applications might effectively support adherence to taking medications.

  Read more →
• 

  Supervisor Mode Access Prevention

  Supervisor Mode Access Prevention (SMAP) is a feature of some CPU implementations such as the Intel Broadwell microarchitecture that allows supervisor mode programs to optionally set user-space memory mappings so that access to those mappings from supervisor mode will cause a trap. This makes it harder for malicious programs to "trick" the kernel into using instructions or data from a user-space program. == History == Supervisor Mode Access Prevention is designed to complement Supervisor Mode Execution Prevention (SMEP), which was introduced earlier. SMEP can be used to prevent supervisor mode from unintentionally executing user-space code. SMAP extends this protection to reads and writes. == Benefits == Without Supervisor Mode Access Prevention, supervisor code usually has full read and write access to user-space memory mappings (or has the ability to obtain full access). This has led to the development of several security exploits, including privilege escalation exploits, which operate by causing the kernel to access user-space memory when it did not intend to. Operating systems can block these exploits by using SMAP to force unintended user-space memory accesses to trigger page faults. Additionally, SMAP can expose flawed kernel code which does not follow the intended procedures for accessing user-space memory. However, the use of SMAP in an operating system may lead to a larger kernel size and slower user-space memory accesses from supervisor code, because SMAP must be temporarily disabled any time supervisor code intends to access user-space memory. == Technical details == Processors indicate support for Supervisor Mode Access Prevention through the Extended Features CPUID leaf. SMAP is enabled when memory paging is active and the SMAP bit in the CR4 control register is set. SMAP can be temporarily disabled for explicit memory accesses by setting the EFLAGS.AC (Alignment Check) flag. The stac (Set AC Flag) and clac (Clear AC Flag) instructions can be used to easily set or clear the flag. When the SMAP bit in CR4 is set, explicit memory reads and writes to user-mode pages performed by code running with a privilege level less than 3 will always result in a page fault if the EFLAGS.AC flag is not set. Implicit reads and writes (such as those made to descriptor tables) to user-mode pages will always trigger a page fault if SMAP is enabled, regardless of the value of EFLAGS.AC. == Operating system support == Linux kernel support for Supervisor Mode Access Prevention was implemented by H. Peter Anvin. It was merged into the mainline Linux 3.7 kernel (released December 2012) and it is enabled by default for processors which support the feature. FreeBSD has supported Supervisor Mode Execution Prevention since 2012 and Supervisor Mode Access Prevention since 2018. OpenBSD has supported Supervisor Mode Access Prevention and the related Supervisor Mode Execution Prevention since 2012, with OpenBSD 5.3 being the first release with support for the feature enabled. NetBSD support for Supervisor Mode Execution Prevention (SMEP) was implemented by Maxime Villard in December 2015. Support for Supervisor Mode Access Prevention (SMAP) was also implemented by Maxime Villard, in August 2017. NetBSD 8.0 was the first release with both features supported and enabled. Haiku support for Supervisor Mode Execution Prevention (SMEP) was implemented by Jérôme Duval in January 2018. macOS has support for SMAP at least since macOS 10.13 released 2017.

  Read more →
• 

  Information schema

  In relational databases, the information schema (information_schema) is an ANSI-standard set of read-only views that provide information about all of the tables, views, columns, and procedures in a database. It can be used as a source of the information that some databases make available through non-standard commands, such as: the SHOW command of MySQL the DESCRIBE command of Oracle's SQLPlus the \d command in psql (PostgreSQL's default command-line program). => SELECT count(table_name) FROM information_schema.tables; count ------- 99 (1 row) => SELECT column_name, data_type, column_default, is_nullable FROM information_schema.columns WHERE table_name='alpha'; column_name | data_type | column_default | is_nullable -------------+-----------+----------------+------------- foo | integer | | YES bar | character | | YES (2 rows) => SELECT FROM information_schema.information_schema_catalog_name; catalog_name -------------- johnd (1 row) == Implementation == As a notable exception among major database systems, Oracle does not as of 2015 implement the information schema. An open-source project exists to address this. RDBMSs that support information_schema include: Amazon Redshift Apache Hive Microsoft SQL Server MonetDB Snowflake MySQL PostgreSQL H2 Database HSQLDB InterSystems Caché MariaDB SingleStore (formerly MemSQL) Mimer SQL Snowflake Trino Presto CrateDB ClickHouse CockroachDB Kinetica DB TiDB RDBMSs that do not support information_schema include: Apache Derby Apache Ignite Firebird Microsoft Access IBM Informix Ingres IBM Db2 Oracle Database SAP HANA SQLite Sybase ASE Sybase SQL Anywhere Teradata Vertica

  Read more →
• 

  Outline of databases

  The following is provided as an overview of and topical guide to databases: Database – organized collection of data, today typically in digital form. The data are typically organized to model relevant aspects of reality (for example, the availability of rooms in hotels), in a way that supports processes requiring this information (for example, finding a hotel with vacancies). == What type of things are databases? == Databases can be described as all of the following: Information – sequence of symbols that can be interpreted as a message. Information can be recorded as signs, or transmitted as signals. Data – values of qualitative or quantitative variables, belonging to a set of items. Data in computing (or data processing) are often represented by a combination of items organized in rows and multiple variables organized in columns. Data are typically the results of measurements and can be visualised using graphs or images. Computer data – information in a form suitable for use with a computer. Data is often distinguished from programs. A program is a sequence of instructions that detail a task for the computer to perform. In this sense, data is everything in software that is not program code. == Types of databases == Active database – Database with event driven features Animation database – Database for storing and reusing animation fragments or motion capture data Back-end database – Organized collection of data in computingPages displaying short descriptions of redirect targets Bibliographic database – database of bibliographic records, an organized digital collection of references to published literature, including journal and newspaper articles, conference proceedings, reports, government and legal publications, patents, books, etc. Centralized database – database located and maintained in one location, unlike a distributed database. Cloud database – Database running on a cloud computing platform Collection database – collection catalog of a museum or archive implemented using a computerized database, in which the institution's objects or material are catalogued. Collective Optimization Database – open repository to enable sharing of benchmarks, data sets and optimization cases from the community, provide web services and Plug-in (computing)|plugins to analyze optimization data and predict program transformations or better hardware designs for multi-objective optimizations based on statistical and machine learning techniques provided there is enough information collected in the repository from multiple users. Configuration management database – Database used to store info on hardware and software assets Cooperative database – holds information on customers and their transactions. Current database – conventional database that stores data that is valid now. Directory – repository or database of information which is optimized for reading, under the assumption that data updates are very rare compared to data reads. Commonly, a directory supports search and browsing in addition to simple lookups. Distributed database – database in which storage devices are not all attached to a common CPU. Document-oriented database – computer program designed for storing, retrieving, and managing document-oriented, or Semi-structured model|semi structured data, information. EDA database – database specialized for the purpose of electronic design automation. Endgame tablebase – computerized database that contains precalculated exhaustive analysis of a chess endgame position. Food composition database (FCDB) – provides detailed information on the nutritional composition of foods. Full-text database – database that contains the complete text of books, dissertations, journals, magazines, newspapers or other kinds of textual documents. Also called a "complete-text database". Government database – collects personal information for various reasons (mass surveillance, Schengen Information System in the European Union, social security, statistics, etc.). Graph database – uses graph structures with nodes, edges, and properties to represent and store data. Knowledge base – special kind of database for knowledge management. A knowledge base provides a means for information to be collected, organised, shared, searched and utilised. Mobile database – can be connected to by a mobile computing device over a mobile network. Navigational database – database in which objects (or records) in it are found primarily by following references from other objects. Non-native speech database – speech database of non-native pronunciations of English. Online database – database accessible from a network, including from the Internet. Operational database – accessed by an Operational System to carry out regular operations of an organization. Parallel database – improves performance through parallelization of various operations, such as loading data, building indexes and evaluating queries. Probabilistic database – uncertain database in which the possible worlds have associated probabilities. Real-time database – processing system designed to handle workloads whose state is constantly changing (Buchmann). Relational database – collection of data items organized as a set of formally described tables from which data can be accessed easily. Spatial database – database that is optimized to store and query data that is related to objects in space, including points, lines and polygons. Temporal database – database with built-in time aspects, for example a temporal data model and a temporal version of Structured Query Language (SQL). Time series database – a time series is an associative array of numbers indexed by a datetime or a datetime range. These time series are often called profiles or curves, depending upon the market. A time series of stock prices might be called a price curve, or a time series of energy consumption might be called a load profile. Despite the disparate naming, the operations performed on them are sufficiently common as to demand special database treatment. Triplestore – purpose-built database for the storage and retrieval of triples, a triple being a data entity composed of subject-predicate-object, like "Bob is 35" or "Bob knows Fred". Very large database (VLDB) – contains an extremely high number of tuples (database rows), or occupies an extremely large physical filesystem storage space. Vulnerability database – platform aimed at collecting, maintaining, and disseminating information about discovered vulnerabilities targeting real computer systems. XLDB – Stands for "eXtremely Large Data Base". XML database – data stored in XML format, where it can be queried, exported and serialized into the desired format. == History of databases == History of databases – History of database management systems –: == Database use == Database usage requirements – Database theory – encapsulates a broad range of topics related to the study and research of the theoretical realm of databases and database management systems. Database machine – or is a computer or special hardware that stores and retrieves data from a database. Also called a "back end processor" Database server – computer program that provides database services to other computer programs or computers, as defined by the client-server model. Database application – computer program whose primary purpose is entering and retrieving information from a computer-managed database. Database management system (DBMS) – software package with computer programs that control the creation, maintenance, and use of a database. Database connection – facility in computer science that allows client software to communicate with database server software, whether on the same machine or not. Datasource – name given to the connection set up to a database from a server. The name is commonly used when creating a query to the database. The Database Source Name (DSN) does not have to be the same as the filename for the database. For example, a database file named "friends.mdb" could be set up with a DSN of "school". Then DSN "school" would then be used to refer to the database when performing a query. Data Source Name (DSN) – are data structures used to describe a connection to a data source. Sometimes known as a database source name though data sources are not limited to databases. Database administrator (DBA) – is a person responsible for the installation, configuration, upgrade, administration, monitoring and maintenance of physical databases. Lock – Comparison of database tools – (provides tables for comparing general and technical information for a number of available database administrator tools.) Database-centric architecture – software architectures in which databases play a crucial role. Also called "data-centric architecture". Intelligent database – was put forward as a system that manages information (rather than data) in a way that appears natural to users and which goes beyond simple record keeping. Two-phase locking (2PL) – is a

  Read more →
• 

  Closest point method

  The closest point method (CPM) is an embedding method for solving partial differential equations on surfaces. The closest point method uses standard numerical approaches such as finite differences, finite element or spectral methods in order to solve the embedding partial differential equation (PDE) which is equal to the original PDE on the surface. The solution is computed in a band surrounding the surface in order to be computationally efficient. In order to extend the data off the surface, the closest point method uses a closest point representation. This representation extends function values to be constant along directions normal to the surface. == Definitions == Closest Point function: Given a surface S , c p ( x ) {\displaystyle {\mathcal {S}},cp(\mathbf {x} )} refers to a (possibly non-unique) point belonging to S {\displaystyle {\mathcal {S}}} , which is closest to x {\displaystyle \mathbf {x} } [SE]. Closest point extension: Let S {\displaystyle {\mathcal {S}}} , be a smooth surface in R d {\displaystyle \mathbb {R} ^{d}} . The closest point extension of a function u : S → R {\displaystyle u:{\mathcal {S}}\rightarrow \mathbb {R} } , to a neighborhood Ω {\displaystyle \Omega } of S {\displaystyle {\mathcal {S}}} , is the function v : Ω → R {\displaystyle v:\Omega \rightarrow \mathbb {R} } , defined by v ( x ) = u ( c p ( x ) ) {\displaystyle v(\mathbf {x} )=u(cp(\mathbf {x} ))} . == Closest point method == Initialization consists of these steps [EW]: If it is not already given, a closest point representation of the surface is constructed. A computational domain is chosen. Typically this is a band around the surface. Replace surface gradients by standard gradients in R 3 {\displaystyle \mathbb {R} ^{3}} . Solution is initialized by extending the initial surface data on to the computational domain using the closest point function. After initialization, alternate between the following two steps: Using the closest point function, extend the solution off the surface to the computational domain. Compute the solution to the embedding PDE on a Cartesian mesh in the computational domain for one time step. == Banding == The surface PDE is extended into R 3 {\displaystyle \mathbb {R} ^{3}} however it is only necessary to solve this new PDE near the surface. Hence, we solve the PDE in a band surrounding the surface for efficient computational purposes. Ω c x : ‖ x − c p ( x ) ‖ 2 ≤ λ {\displaystyle \Omega _{c}{x:\|x-cp(x)\|_{2}\leq \lambda }} where λ {\displaystyle \lambda } is the bandwidth. == Example: Heat equation on a circle == Using initial profile u S ( θ , t ) = sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\sin(\theta )} leads to the solution u S ( θ , t ) = exp ⁡ ( − t ) sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\exp(-t)\sin(\theta )} for the heat equation. Forward Euler time-stepping is used with relation Δ t = 0.1 Δ x 2 {\displaystyle \Delta t=0.1\Delta x^{2}} and degree-four interpolation polynomials for the interpolations. Second-order centered differences are used for the spatial discretization. The CPM results in the expected second order error in the solution u {\displaystyle u} . == Applications == The closest point method can be applied to various PDEs on surfaces. Reaction–diffusion problems on point clouds [RD], eigenvalue problems [EV], and level set equations [LS] are a few examples.

  Read more →
• 

  Unspent transaction output

  In cryptocurrencies, an unspent transaction output (UTXO, often capitalized as UTxO) is a distinctive element in a subset of digital currency models. A UTXO represents a certain amount of cryptocurrency that has been authorized by a sender and is available to be spent by a recipient. The utilization of UTXOs in transaction processes is a key feature of many cryptocurrencies, but it primarily characterizes those implementing the UTXO model. UTXOs employ public key cryptography to ascertain and transfer ownership. More specifically, the recipient's public key is formatted into the UTXO, thereby limiting the capability to spend the UTXO to the account that can demonstrate ownership of the corresponding private key. A valid digital signature associated with the public key must be included for the UTXO to be spent. In the UTXO model, each unit of currency is treated as a discrete object. The history of a UTXO is documented only within the blocks where it is transferred. To ascertain the total balance of an account, one must scan each block to find the latest UTXOs linked to that account. While all nodes within a blockchain network must consent to the block history, the blocks relevant to an account's balance are unique to that account. UTXOs constitute a chain of ownership depicted as a series of digital signatures dating back to the coin's inception, regardless of whether the coin was minted via mining, staking, or another procedure determined by the cryptocurrency protocol. The UTXO model was invented for Bitcoin. Cardano uses an extended version of the UTXO model known as EUTXO. == Origins == The conceptual framework of the UTXO model can be traced back to Hal Finney's Reusable Proofs of Work proposal, which itself was based on Adam Back's 1997 Hashcash proposal. Bitcoin, released in 2009, was the first widespread implementation of the UTXO model in practice. == UTXO model vs. account Model == Cryptocurrencies that utilize the UTXO model function differently compared to those using the account model. In the UTXO model, individual units of cryptocurrency, termed as unspent transaction outputs (UTXOs), are transferred between users, analogous to the exchange of physical cash. This model impacts how transactions and ownership are recorded and verified within the blockchain network. The account model preserves a record of each account and its corresponding balance for every block added to the network. This setup enables quicker balance verification without the need to scan historical blocks, but it increases the raw size of each block (though data compression techniques can be utilized to alleviate this). However, both models necessitate the inspection of past blocks to fully authenticate the origin of coins. In the UTXO model, each object is immutable - units of coins cannot be 'edited' in the same way an account balance is modified when a transaction occurs. Rather, the balance is computed from the transaction history dating back to when the coins were first minted. This simplicity enhances security, as a UTXO either exists in its anticipated form or it does not. In contrast, the account model requires meticulous verification of the account's status during transactions, which can lead to oversights if not conducted correctly. In valid blockchain transactions, only unspent outputs (UTXOs) are permissible for funding subsequent transactions. This requirement is critical to prevent double-spending and fraud. Accordingly, inputs in a transaction are removed from the UTXO set, while outputs create new UTXOs that are added to the set. The holders of private keys, such as those with cryptocurrency wallets, can utilize these UTXOs for future transactions.

  Read more →
• 

  Joint constraints

  Joint constraints are rotational constraints on the joints of an artificial system. They are used in an inverse kinematics chain, in fields including 3D animation or robotics. Joint constraints can be implemented in a number of ways, but the most common method is to limit rotation about the X, Y and Z axis independently. An elbow, for instance, could be represented by limiting rotation on X and Z axis to 0 degrees, and constraining the Y-axis rotation to 130 degrees. To simulate joint constraints more accurately, dot-products can be used with an independent axis to repulse the child bones orientation from the unreachable axis. Limiting the orientation of the child bone to a border of vectors tangent to the surface of the joint, repulsing the child bone away from the border, can also be useful in the precise restriction of shoulder movement.

  Read more →