AI Chat Picture

AI Chat Picture — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Brownout (software engineering)

  Brownout in software engineering is a technique that involves disabling certain features of an application. == Description == Brownout is used to increase the robustness of an application to computing capacity shortage. If too many users are simultaneously accessing an application hosted online, the underlying computing infrastructure may become overloaded, rendering the application unresponsive. Users are likely to abandon the application and switch to competing alternatives, hence incurring long-term revenue loss. To better deal with such a situation, the application can be given brownout capabilities: The application will disable certain features – e.g., an online shop will no longer display recommendations of related products – to avoid overload. Although reducing features generally has a negative impact on the short-term revenue of the application owner, long-term revenue loss can be avoided. The technique is inspired by brownouts in power grids, which consists in reducing the power grid's voltage in case electricity demand exceeds production. Some consumers, such as incandescent light bulbs, will dim – hence originating the term – and draw less power, thus helping match demand with production. Similarly, a brownout application helps match its computing capacity requirements to what is available on the target infrastructure. Brownout complements elasticity. The former can help the application withstand short-term capacity shortage, but does so without changing the capacity available to the application. In contrast, elasticity consists of adding (or removing) capacity to the application, preferably in advance, so as to avoid capacity shortage altogether. The two techniques can be combined; e.g., brownout is triggered when the number of users increases unexpectedly until elasticity can be triggered, the latter usually requiring minutes to show an effect. Brownout is relatively non-intrusive for the developer, for example, it can be implemented as an advice in aspect-oriented programming. However, surrounding components, such as load-balancers, need to be made brownout-aware to distinguish between cases where an application is running normally and cases where the application maintains a low response time by triggering brownout. == Usage in phased deprecation == A related use of the brownout concept in software engineering is the deliberate introduction of temporary outages to a system, API or feature that is being phased out. This is sometimes also called a "scream test" when it is used to discover unknown dependents of a system or API. The intention is to allow detection of downstream consumers of an API or service who may otherwise have missed deprecation announcements or to uncover hidden side-effects of the deprecation that may have been overlooked. The intention is that developers of dependent systems will notice their own system failures caused by the upstream brownout. Such brownouts are typically pre-announced scheduled outages or probabilistic in nature (such as artificially failing a percentage of requests). As a brownout is only a temporary or partial outage, it provides downstream consumers of an API or service time to remove any discovered dependencies on the deprecated API before it is fully retired. For consumers that have already prepared for the deprecation, a brownout provides valuable testing that the final removal of the service won't cause any unexpected problems.

  Read more →
• 

  Foreground detection

  Foreground detection is one of the major tasks in the field of computer vision and image processing whose aim is to detect changes in image sequences. Background subtraction is any technique which allows an image's foreground to be extracted for further processing (object recognition etc.). Many applications do not need to know everything about the evolution of movement in a video sequence, but only require the information of changes in the scene, because an image's regions of interest are objects (humans, cars, text etc.) in its foreground. After the stage of image preprocessing (which may include image denoising, post processing like morphology etc.) object localisation is required which may make use of this technique. Foreground detection separates foreground from background based on these changes taking place in the foreground. It is a set of techniques that typically analyze video sequences recorded in real time with a stationary camera. == Description == All detection techniques are based on modelling the background of the image, i.e., setting the background and detecting which changes occur. Defining the background can be difficult when it contains shapes, shadows, and moving objects. In defining the background, it is assumed that stationary objects may vary in color and intensity over time. Scenarios in which these techniques apply tend to be very diverse. There can be highly variable sequences, such as images with different lighting, interiors, exteriors, quality, and noise. In addition to real-time processing, systems need to adapt to these changes. A foreground detection system should be able to: Develop a background model (estimate). Be robust to lighting changes, repetitive movements (leaves, waves, shadows), and long-term changes. == Background subtraction == Background subtraction is a widely used approach for detecting moving objects in videos from static cameras. The rationale in the approach is that of detecting the moving objects from the difference between the current frame and a reference frame, often called "background image", or "background model". Background subtraction is mostly done if the image in question is a part of a video stream. Background subtraction provides important cues for numerous applications in computer vision, for example surveillance tracking or human pose estimation. Background subtraction is generally based on a static background hypothesis which is often not applicable in real environments. With indoor scenes, reflections or animated images on screens lead to background changes. Similarly, due to wind, rain or illumination changes brought by weather, static backgrounds methods have difficulties with outdoor scenes. == Temporal average filter == The temporal average filter is a method that was proposed at the Velastin. This system estimates the background model from the median of all pixels of a number of previous images. The system uses a buffer with the pixel values of the last frames to update the median for each image. To model the background, the system examines all images in a given time period called training time. At this time, we only display images and will find the median, pixel by pixel, of all the plots in the background this time. After the training period for each new frame, each pixel value is compared with the input value of funds previously calculated. If the input pixel is within a threshold, the pixel is considered to match the background model and its value is included in the pixbuf. Otherwise, if the value is outside this threshold pixel is classified as foreground, and not included in the buffer. This method cannot be considered very efficient because they do not present a rigorous statistical basis and requires a buffer that has a high computational cost. == Conventional approaches == A robust background subtraction algorithm should be able to handle lighting changes, repetitive motions from clutter and long-term scene changes. The following analyses make use of the function of V(x,y,t) as a video sequence where t is the time dimension, x and y are the pixel location variables. e.g. V(1,2,3) is the pixel intensity at (1,2) pixel location of the image at t = 3 in the video sequence. === Using frame differencing === A motion detection algorithm begins with the segmentation part where foreground or moving objects are segmented from the background. The simplest way to implement this is to take an image as background and take the frames obtained at the time t, denoted by I(t) to compare with the background image denoted by B. Here using simple arithmetic calculations, we can segment out the objects simply by using image subtraction technique of computer vision meaning for each pixels in I(t), take the pixel value denoted by P[I(t)] and subtract it with the corresponding pixels at the same position on the background image denoted as P[B]. In mathematical equation, it is written as: P [ F ( t ) ] = P [ I ( t ) ] − P [ B ] {\displaystyle P[F(t)]=P[I(t)]-P[B]} The background is assumed to be the frame at time t. This difference image would only show some intensity for the pixel locations which have changed in the two frames. Though we have seemingly removed the background, this approach will only work for cases where all foreground pixels are moving, and all background pixels are static. A threshold "Threshold" is put on this difference image to improve the subtraction (see Image thresholding): | P [ F ( t ) ] − P [ F ( t + 1 ) ] | > T h r e s h o l d {\displaystyle |P[F(t)]-P[F(t+1)]|>\mathrm {Threshold} } This means that the difference image's pixels' intensities are 'thresholded' or filtered on the basis of value of Threshold. The accuracy of this approach is dependent on speed of movement in the scene. Faster movements may require higher thresholds. === Mean filter === For calculating the image containing only the background, a series of preceding images are averaged. For calculating the background image at the instant t: B ( x , y , t ) = 1 N ∑ i = 1 N V ( x , y , t − i ) {\displaystyle B(x,y,t)={1 \over N}\sum _{i=1}^{N}V(x,y,t-i)} where N is the number of preceding images taken for averaging. This averaging refers to averaging corresponding pixels in the given images. N would depend on the video speed (number of images per second in the video) and the amount of movement in the video. After calculating the background B(x,y,t) we can then subtract it from the image V(x,y,t) at time t = t and threshold it. Thus the foreground is: | V ( x , y , t ) − B ( x , y , t ) | > T h {\displaystyle |V(x,y,t)-B(x,y,t)|>\mathrm {Th} } where Th is a threshold value. Similarly, we can also use median instead of mean in the above calculation of B(x,y,t). Usage of global and time-independent thresholds (same Th value for all pixels in the image) may limit the accuracy of the above two approaches. === Running Gaussian average === For this method, Wren et al. propose fitting a Gaussian probabilistic density function (pdf) on the most recent n {\displaystyle n} frames. In order to avoid fitting the pdf from scratch at each new frame time t {\displaystyle t} , a running (or on-line cumulative) average is computed. The pdf of every pixel is characterized by mean μ t {\displaystyle \mu _{t}} and variance σ t 2 {\displaystyle \sigma _{t}^{2}} . The following is a possible initial condition (assuming that initially every pixel is background): μ 0 = I 0 {\displaystyle \mu _{0}=I_{0}} σ 0 2 = ⟨ some default value ⟩ {\displaystyle \sigma _{0}^{2}=\langle {\text{some default value}}\rangle } where I t {\displaystyle I_{t}} is the value of the pixel's intensity at time t {\displaystyle t} . In order to initialize variance, we can, for example, use the variance in x and y from a small window around each pixel. Note that background may change over time (e.g. due to illumination changes or non-static background objects). To accommodate for that change, at every frame t {\displaystyle t} , every pixel's mean and variance must be updated, as follows: μ t = ρ I t + ( 1 − ρ ) μ t − 1 {\displaystyle \mu _{t}=\rho I_{t}+(1-\rho )\mu _{t-1}} σ t 2 = d 2 ρ + ( 1 − ρ ) σ t − 1 2 {\displaystyle \sigma _{t}^{2}=d^{2}\rho +(1-\rho )\sigma _{t-1}^{2}} d = | ( I t − μ t ) | {\displaystyle d=|(I_{t}-\mu _{t})|} Where ρ {\displaystyle \rho } determines the size of the temporal window that is used to fit the pdf (usually ρ = 0.01 {\displaystyle \rho =0.01} ) and d {\displaystyle d} is the Euclidean distance between the mean and the value of the pixel. We can now classify a pixel as background if its current intensity lies within some confidence interval of its distribution's mean: | ( I t − μ t ) | σ t > k ⟶ foreground {\displaystyle {\frac {|(I_{t}-\mu _{t})|}{\sigma _{t}}}>k\longrightarrow {\text{foreground}}} | ( I t − μ t ) | σ t ≤ k ⟶ background {\displaystyle {\frac {|(I_{t}-\mu _{t})|}{\sigma _{t}}}\leq k\longrightarrow {\text{background}}} where the parameter k {\displaystyle k} is a free threshold (usuall

  Read more →
• 

  Group (online social networking)

  A group (often termed as a community, e-group or club) is a feature in many social networking services which allows users to create, post, comment to and read from their own interest- and niche-specific forums, often within the realm of virtual communities. Groups, which may allow for open or closed access, invitation and/or joining by other users outside the group, are formed to provide mini-networks within the larger, more diverse social network service. Much like electronic mailing lists, they are also owned and maintained by owners, moderators, or managers, who can edit posts to discussion threads and regulate member behavior within the group. However, unlike traditional Internet forums and mailing lists, groups in social networking services allow owners and moderators alike to share account credentials between groups without having to log in to every group. == History == The rise of the World Wide Web resulted in an expansion of the varieties of methods for communication on the Internet, much of which was limited in the 1980s to discussion in newsgroups, BBS and chat rooms. While the initial rise of web-based mass communication took place in the form of early Internet forums in the mid-1990s, a few services such as MSN Groups, Yahoo! Groups and eGroups pioneered the combination of web-based mailing list archives with user profiles; by 2000, such services doubled as full-fledged mailing lists and Internet forums, allowing users to create an extremely large variety of discussion and networking mediums with comparatively sparse thresholds of complexity. Further features included chat rooms (often Java-based), image and video galleries, and group calendars. The second spurt of bullecalbel networking, one which was less dependent upon mailing list-related features and more upon Internet forum features, began in the early- to mid-2000s in the form of such services as LiveJournal, Friendster, MySpace and Facebook. These services continued the evolution of the web-based e-group as a discussion and organization medium. In the late 2000s, services such as Yammer and Micromobs further advanced e-group communication by taking advantage of microblog-style activity streams. == In virtual worlds == In Second Life, groups are centered less around discussion forums (as such, an asynchronous conferencing feature is not built into the Second Life network as of 2009) and common interest, and are more centered on maintenance of a particular geographic location inside the network. Such groups are often created by the owners of areas such as buildings, plots of land or whole islands in order to cater to the most frequent visitors and patrons of the regions. With the limited asynchronous messaging capability of Second Life, groups are also a means of mass-emailing announcements pertinent to the group, but are not completely capable of hosting discussion or deliberation of such announcement messages. == The importance of online social networking groups == Before people expanded their social life to the internet, they had small circles. These included the networks gained from rural areas or villages, such as family, friends and neighbors, and community groups such as churches. These networks represented a social safety net to support individuals. Since we have moved a huge part of our social life to the internet, online social networking groups have become a way to maintain a structure in social life. Online networking is made up by clusters of people, bounding themselves together on the World Wide Web. To be able to sort out the many different clusters we belong to we use online groups to helps us arrange and make sense of all our contacts. This sense-making is rooted within us, we sort and put people into compartments or sort by categories to make sense and try to understand our relationships to the people around us. Online social networking groups therefore enables us to do the same thing online. Online social networks have a huge impact on people’s lives. Since the social network revolution has offered people with more loose ties and diversity in their relationships, it creates both stress and opportunities. Furthermore, the Internet revolution has transformed the contact point from a household to the individual. In addition, people are in constant communication with each other due to the mobile revolution. All in all, the mentioned revolutions created a new social operating system: "networked individualism". The way that people currently connect, communicate and exchange information can be described as a form of operating system because of the similarities between the structure of computer systems and the networked individualism that has taken form in society. These structures consist of unwritten rules, norms, constraints and opportunities which are apparent for those who are part of a specific network. == Concerns == There is some research claiming that fake news is infiltrating online social networking. A recent study claimed that people exposed to fake news generally revert to their original opinion even after finding out the information they were given was false.

  Read more →
• 

  Virtual advertising

  Virtual advertising is the use of digital technology to insert virtual advertisements into a live or pre-recorded television show, often in sports events. This technique is often used to allow broadcasters to overlay existing physical advertising panels inside the sports venue with virtual content on the screen when broadcasting the same event in multiple regions; a Spanish football game can be broadcast in Mexico with Mexican advertisements. Similarly, virtual content can be inserted onto empty space within the sports venue such as the pitch, where physical advertising cannot be placed due to regulatory or safety reasons. Virtual advertising content is intended to be photorealistic, so that the viewer has the impression they are seeing the real in-stadium advertising. == History == Throughout the 1980s, 1990s, and 2000s, advertising on television and in newspapers was a popular method of spreading information. The marketer Jeremiah Lynwood stated that "Thirty years ago, [U.S.] consumers viewed an average of 560 ads per day", mostly from newspapers, television shows, gasoline pumps, and so on. Lynwood also stated that, at the time, "American consumers may be exposed to 3,000 commercial messages every day". Within that time frame, the exposure of daily ads have supported many local and big businesses. With the arrival of the 2000s and 2010s, technological advances have created new opportunities for many businesses to grow. In the 21st century, virtual advertising has been used to create virtual product placements in television shows hours, days, or years after they have been produced. Advertisements can be targeted to regional markets and updated over time to ensure maximum efficiency of advertising money. A good example of how virtual advertising is used in everyday life is in sports. Virtual advertising uses the latest technology to place an ad in position to the field of play, regardless of camera motion, and the players' movement over the logos. Recently, the NHL have virtually inserted sponsors on the glass above the physical boards in NHL stadiums. Big brands will not spend their time or money on hitting a certain region when their main goal is to build global brand awareness. Digital signage opportunities allow these larger brands to purchase signage in a stadium during games that are instead nationally televised. This gets even more expansive thanks to social media outlets like Twitter, Facebook, and Amazon. On the other hand, local businesses sign when there are smaller games going on. The signage is much more affordable and still reaches a vast number of people. Virtual advertising may even make live attendance more attractive to sport fans because the technology allows the playing field and surrounding areas to be cleared of advertisements while television viewers at home are exposed to commercials. For the most part, virtual advertising makes a live attendance more attractive to sports fans, because instead of being at home watching commercials, live fans are able to be clear of advertisements and enjoy the game without pop-up ads. == Technology == The technology used in virtual insertions often uses automated processes such as: automatic detection of playfield limits, automatic detection of cuts, recognition of playfield surface, recognition of existing logos for logo replacements, etc. An operator is usually dedicated to the visual control of the effect but new systems allow to use the instant replay operator. == Examples == === Live events === Virtual advertisements can be effectively integrated into live television in real-time. For example, Fox Sports Net places a virtual advertisement on the glass behind the goaltender that can only be seen on television. The advertising in the playfields is property of the club, except in some professional sports where the league or federation owns the advertising rights. However, the advertising rights broadcast on the screen are property of the broadcasters or the TV channel. This means that second right holders can benefit from selling this virtual advertising. The number of TV viewers is also higher than the people in the stadium, generating more visibility to the advertised marks and more income to the broadcasters. Virtual advertising was first introduced in football during the 2015 Audi Cup at the Allianz Arena in Munich. AIM Sport implemented the technology to digitally overlay advertisements on the stadium's perimeter boards, allowing different sponsors to be displayed to viewers in different broadcast regions. In Formula One, virtual ads are placed on the grass or as virtual billboards. In baseball, Major League Baseball places virtual advertisements on a back-board behind the batter which can be targeted differently in local markets or countries. During the World Series, MLB international broadcasts of the World Series feature different advertisements on a per market basis, showing a different ad in the US, Canadian, Latin American and Japanese markets. In tennis, e.g. during the 2019 ATP Finals in London's O2 Arena certain logos in the background were replaced for various country feeds. In table tennis e.g. during the ITTF World Tour Australian Open 2019 virtual advertising overlays were used by uniqFEED AG in Switzerland. Since the 2022–23 season, the National Hockey League (NHL) has used digitally enhanced dasherboards (DED) to erase and replace ads on each arena's boards with up to 120 thirty-second segments on all or part of the rink. Each broadcaster can use a different set of ads. DED were first used at the 2016 World Cup of Hockey, which was organized by the NHL. At UEFA Euro 2024, AIM Sport provided virtual advertising for all matches, marking one of the largest implementations of the technology in an international tournament. In addition to the tournament itself, virtual advertising was also used in the participating teams' domestic matches, extending region-specific advertising beyond the competition itself.

  Read more →
• 

  List of large language models

  A large language model (LLM) is a type of machine learning model designed for natural language processing tasks such as language generation. LLMs are language models with many parameters, and are trained with self-supervised learning on a vast amount of text. == List == For the training cost column, 1 petaFLOP-day equals 1 petaFLOP/sec × 1 day, or 8.64×1019 FLOP (floating point operations). Only the cost of the largest model is shown. The number of parameters is measured in billions, and the training cost is measured in petaFLOP-days. === 2018 === === 2019 === === 2020 === === 2021 === === 2022 === === 2023 === === 2024 === === 2025 === === 2026 ===

  Read more →
• 

  Control communications

  In telecommunications, control communications is the branch of technology devoted to the design, development, and application of communications facilities used specifically for control purposes, such as for controlling (a) industrial processes, (b) movement of resources, (c) electric power generation, distribution, and utilization, (d) communications networks, and (e) transportation systems.

  Read more →
• 

  Comparison of user features of operating systems

  Comparison of user features of operating systems refers to a comparison of the general user features of major operating systems in a narrative format. It does not encompass a full exhaustive comparison or description of all technical details of all operating systems. It is a comparison of basic roles and the most prominent features. It also includes the most important features of the operating system's origins, historical development, and role. == Overview == An operating system (OS) is system software that manages computer hardware, software resources, and provides common services for computer programs. Time-sharing operating systems schedule tasks for efficient use of the system and may also include accounting software for cost allocation of processor time, mass storage, printing, and other resources. For hardware functions such as input and output and memory allocation, the operating system acts as an intermediary between programs and the computer hardware, although the application code is usually executed directly by the hardware and frequently makes system calls to an OS function or is interrupted by it. Operating systems are found on many devices that contain a computer – from cellular phones and video game consoles to web servers and supercomputers. As of June 2024, the dominant general-purpose desktop operating system is Microsoft Windows with a market share of around 72.91%. macOS by Apple Inc. is in second place (14.93%), and the varieties of Linux are collectively in third place (4.04%). In the mobile sector, including both smartphones and tablets, Android is dominant with a market share of 71%, followed by Apple's iOS with 28%; for smartphones alone, Android has 72% and iOS has 28%. Linux distributions are dominant in the server and supercomputing sectors. Other specialized classes of operating systems (special-purpose operating systems)), such as embedded and real-time systems, exist for many applications. Security-focused operating systems also exist. Some operating systems have low system requirements (i.e. light-weight Linux distribution). Others may have higher system requirements. Some operating systems require installation or may come pre-installed with purchased computers (OEM-installation), whereas others may run directly from media (i.e. live cd) or flash memory (i.e. USB stick). == MS-DOS == === Overview === MS-DOS (acronym for Microsoft Disk Operating System) is an operating system for x86-based personal computers mostly developed by Microsoft. Collectively, MS-DOS, its rebranding as IBM PC DOS, and some operating systems attempting to be compatible with MS-DOS, are sometimes referred to as "DOS" (which is also the generic acronym for disk operating system). MS-DOS was the main operating system for IBM PC compatible personal computers during the 1980s, from which point it was gradually superseded by operating systems offering a graphical user interface (GUI), in various generations of the graphical Microsoft Windows operating system. IBM licensed and re-released it in 1981 as PC DOS 1.0 for use in its PCs. Although MS-DOS and PC DOS were initially developed in parallel by Microsoft and IBM, the two products diverged after twelve years, in 1993, with recognizable differences in compatibility, syntax, and capabilities. During its lifetime, several competing products were released for the x86 platform, and MS-DOS went through eight versions, until development ceased in 2000. Initially, MS-DOS was targeted at Intel 8086 processors running on computer hardware using floppy disks to store and access not only the operating system, but application software and user data as well. Progressive version releases delivered support for other mass storage media in ever greater sizes and formats, along with added feature support for newer processors and rapidly evolving computer architectures. Ultimately, it was the key product in Microsoft's development from a programming language company to a diverse software development firm, providing the company with essential revenue and marketing resources. It was also the underlying basic operating system on which early versions of Windows ran as a GUI. == Microsoft Windows == === Overview === Microsoft Windows, commonly referred to as Windows, is a group of several proprietary graphical operating system families, all of which are developed and marketed by Microsoft. Each family caters to a certain sector of the computing industry. Active Microsoft Windows families include Windows NT and Windows IoT; these may encompass subfamilies, (e.g. Windows Server or Windows Embedded Compact) (Windows CE). Defunct Microsoft Windows families include Windows 9x, Windows Mobile, and Windows Phone. Microsoft announced an operating environment named Windows on 10 November 1983, as a graphical operating system shell for MS-DOS in response to the growing interest in graphical user interfaces (GUIs); Windows 1.0 first shipped on 20 November 1985. Microsoft Windows came to dominate the world's personal computer (PC) market with over 90% market share, overtaking Mac OS, which had been introduced in 1984, while Microsoft has in 2020 lost its dominance of the consumer operating system market, with Windows down to 30%, lower than Apple's 31% mobile-only share (65% for desktop operating systems only, i.e. "PCs" vs. Apple's 28% desktop share) in its home market, the US, and 32% globally (77% for desktops), where Google's Android leads. Apple came to see Windows as an unfair encroachment on their innovation in GUI development as implemented on products such as the Lisa and Macintosh (eventually settled in court in Microsoft's favor in 1993). As of January 2023, on PCs, Windows is still the most popular operating system in all countries. However, in 2014, Microsoft admitted losing the majority of the overall operating system market to Android, because of the massive growth in sales of Android smartphones. In 2014, the number of Windows devices sold was less than 25% that of Android devices sold. This comparison, however, may not be fully relevant, as the two operating systems traditionally target different platforms. Still, numbers for server use of Windows (that are comparable to competitors) show one third market share, similar to that for end user use. As of October 2020, the most recent version of Windows for PCs, tablets and embedded devices is Windows 10, version 20H2. The most recent version for server computers is Windows Server, version 20H2. A specialized version of Windows also runs on the Xbox One video game console. === Windows 95 === Windows 95 introduced a redesigned shell based around a desktop metaphor; File shortcuts (also known as shell links) were introduced and the desktop was re-purposed to hold shortcuts to applications, files and folders, reminiscent of Mac OS. In Windows 3.1 the desktop was used to display icons of running applications. In Windows 95, the currently running applications were displayed as buttons on a taskbar across the bottom of the screen. The taskbar also contained a notification area used to display icons for background applications, a volume control and the current time. The Start menu, invoked by clicking the "Start" button on the taskbar or by pressing the Windows key, was introduced as an additional means of launching applications or opening documents. While maintaining the program groups used by its predecessor Program Manager, it also displayed applications within cascading sub-menus. The previous File Manager program was replaced by Windows Explorer and the Explorer-based Control Panel and several other special folders were added such as My Computer, Dial Up Networking, Recycle Bin, Network Neighborhood, My Documents, Recent documents, Fonts, Printers, and My Briefcase among others. AutoRun was introduced for CD drives. The user interface looked dramatically different from prior versions of Windows, but its design language did not have a special name like Metro, Aqua or Material Design. Internally it was called "the new shell" and later simply "the shell". The subproject within Microsoft to develop the new shell was internally known as "Stimpy". In 1994, Microsoft designers Mark Malamud and Erik Gavriluk approached Brian Eno to compose music for the Windows 95 project. The result was the six-second start-up music-sound of the Windows 95 operating system, The Microsoft Sound and it was first released as a startup sound in May 1995 on Windows 95 May Test Release build 468. When released for Windows 95 and Windows NT 4.0, Internet Explorer 4 came with an optional Windows Desktop Update, which modified the shell to provide several additional updates to Windows Explorer, including a Quick Launch toolbar, and new features integrated with Internet Explorer, such as Active Desktop (which allowed Internet content to be displayed directly on the desktop). Some of the user interface elements introduced in Windows 95, such as the desktop, taskbar, Start menu and Windows

  Read more →
• 

  ProjectExplorer

  ProjectExplorer is a documentary short film series. The films, directed and produced by ProjectExplorer's Founder, Jenny M Buccos, focus on histories and cultures of foreign places and people using interviews with subject experts, artists, and public figures including Archbishop Desmond Tutu, Dr. John Kani, Greg Marinovich, and Sipho “Hotstix” Mabuse. Produced for a child and young adult audience, segments in each series depict everyday life and the challenges and concerns of those living in the locations and regions featured. Each film is 2–4 minutes in length, with each series containing approximately 40 films. The ProjectExplorer series is distributed internationally without charge via the web by ProjectExplorer, LTD. an American not-for-profit organization. Three series have been produced and distributed. In fall 2009, ProjectExplorer's third series, Jordan, received a GOLD level Parents' Choice Award for excellence in web programming. == Film series == === Shakespeare's England (2006) === The first series was filmed in London, Stratford-upon-Avon, and New York City. The series includes more than 30 film segments. United Kingdom locations and individuals include: The London Eye The Tower of London The Whitechapel Bell Foundry, which demonstrates the process of making a bell Simon Hughes, Member of Parliament and President of the Liberal Democrats The Old Vic The Royal Shakespeare Company The National Archives (UK) Segments filmed in New York City include: Michael Cumpsty discusses and performs monologues from Hamlet (while starring in the Classic Stage Company production) Michael Stuhlbarg discusses and performs a monologue from Macbeth === South Africa (2007) === Filmed in Johannesburg, Cape Town, and KwaZulu Natal, the series contains over 40 film segments including: Ntate Thabong Phosa, a lesiba player from Lesotho. Due to the rarity of lesiba players globally, this is one of the only publicly available examples of the lesiba played on film. A Robben Island piece, filmed at the cell in which Nelson Mandela was held for 18 of his 27-year imprisonment. JSE Securities Exchange with Leigh Roberts, correspondent for CNBC Africa. A 3-part series on HIV/AIDS with amfAR Director of Research, Dr. Rowena Johnson. Dr. Johnson discusses high cost of anti-retroviral drugs and testing in South Africa. The June 16, 1976 Soweto Uprising, with archival film footage and photography from SABC and The Sowetan newspaper. Prominent South Africans featured in the series: Dr. John Kani, Chairperson of the Apartheid Museum and TONY Award Winning Actor Musician Sipho “Hotstix” Mabuse Former U.N. Ambassador Dave A. Steward, Executive Director of the FW de Klerk Foundation Director and producer, Duma Ndlovu Malcolm Purkey, Artistic Director of the Market Theatre === South Africa, Part II (2008) === Filmed in Johannesburg, Cape Town, and New York City, the series contains over 10 film segments. Prominent South Africans featured in the series: Archbishop Desmond Tutu, Nobel Peace Prize laureate Photojournalist Greg Marinovich, Pulitzer Prize winner and co-author of The Bang-Bang Club Vusi Mahlasela, musician Author, Max du Preez === Jordan (2008) === Filmed in Amman, Petra, Umm Qais, Jerash, Madaba, Bethany, the Dead Sea, and New York City, the series contains more than 45 film segments. Jordan series segments include: A tour of the throne room of King Abdullah II, at Raghadan Palace Sharing mansaf with a Bedouin family in the Wadi Rum desert The UNRWA Jabal Hussein refugee camp The Siq, Treasury, and Monastery at Petra The ruins of Gadara at Umm Qais Jerash, the capital and largest city of Jordan's Jerash Governorate Madaba, home of the Madaba Map and the mosaic capital of Jordan The archaeological site at Bethany Traditional clothing from Salt and Ma'an The reintroduction into the wild of the endangered Arabian Oryx The Desert Castles The science of the Dead Sea Her Royal Highness Princess Basma bint Ali and her Royal Botanic Garden

  Read more →
• 

  Linux color management

  Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl

  Read more →
• 

  The Culture of Connectivity

  The Culture of Connectivity: A Critical History of Social Media is a book by José van Dijck published by Oxford University Press in 2013 on social media platforms and their history. The author considers the histories of five social media platforms: Facebook, Twitter, Flickr, YouTube, and Wikipedia. She focuses on how their technological, social and cultural dimensions contribute to their current status.

  Read more →
• 

  Coupling (electronics)

  In electronics, electric power and telecommunication, coupling is the transfer of electrical energy from one circuit to another, or between parts of a circuit. Coupling can be deliberate as part of the function of the circuit, or it may be undesirable, for instance due to coupling to stray fields. For example, energy is transferred from a power source to an electrical load by means of conductive coupling, which may be either resistive or direct coupling. An AC potential may be transferred from one circuit segment to another having a DC potential by use of a capacitor. Electrical energy may be transferred from one circuit segment to another segment with different impedance by use of a transformer; this is known as impedance matching. These are examples of electrostatic and electrodynamic inductive coupling. == Types == Electrical conduction: Direct coupling, also called conductive coupling and galvanic coupling Resistive conduction Atmospheric plasma channel coupling Electromagnetic induction: Electrodynamic induction — commonly called inductive coupling, also magnetic coupling Capacitive coupling Evanescent wave coupling Electromagnetic radiation: Radio waves — Wireless telecommunications. Electromagnetic interference (EMI) — Sometimes called radio frequency interference (RFI), is unwanted coupling. Electromagnetic compatibility (EMC) requires techniques to avoid such unwanted coupling, such as electromagnetic shielding. Microwave power transmission Other kinds of energy coupling: Acoustic coupler

  Read more →
• 

  Digital intermediate

  Digital intermediate (DI) is a motion picture finishing process which classically involves digitizing a motion picture and manipulating the color and other image characteristics. == Definition and overview == A digital intermediate often replaces or augments the photochemical timing process and is usually the final creative adjustment to a movie before distribution in theaters. It is distinguished from the telecine process in which film is scanned and color is manipulated early in the process to facilitate editing. However the lines between telecine and DI are continually blurred and are often executed on the same hardware by colorists of the same background. These two steps are typically part of the overall color management process in a motion picture at different points in time. A digital intermediate is also customarily done at higher resolution and with greater color fidelity than telecine transfers. Although originally used to describe a process that started with film scanning and ended with film recording, digital intermediate is also used to describe color correction and color grading and even final mastering when a digital camera is used as the image source and/or when the final movie is not output to film. This is due to recent advances in digital cinematography and digital projection technologies that strive to match film origination and film projection. In traditional photochemical film finishing, an intermediate is produced by exposing film to the original camera negative. The intermediate is then used to mass-produce the films that get distributed to theaters. Color grading is done by varying the amount of red, green, and blue light used to expose the intermediate. The digital intermediate process uses digital tools to color grade, which allows for much finer control of individual colors and areas of the image, and allows for the adjustment of image structure (grain, sharpness, etc.). The intermediate for film reproduction can then be produced by means of a film recorder. The physical intermediate film that is a result of the recording process is sometimes also called a digital intermediate, and is usually recorded to internegative (IN) stock, which is inherently finer-grain than original camera negative (OCN). One of the key technical achievements that made the transition to DI possible was the use of 3D look-up tables, which could be used to mimic how the digital image would look once it was printed onto release print stock. This removed a large amount of guesswork from the film-making process, and allowed greater freedom in the colour grading process while reducing risk. The digital master is often used as a source for a DCI-compliant distribution of the motion picture for digital projection. For archival purposes, the digital master created during the digital intermediate process can be recorded to very stable high dynamic range yellow-cyan-magenta (YCM) separations on black-and-white film with an expected 100-year or longer life. While still subject to the natural degradation of any analog chemical master, this archival format, long used in the industry prior to the invention of DI, was considered valuable for providing an archival medium that is independent of changes in digital data recording technologies and file formats that might otherwise render digitally archived material unreadable in the long term. A "film intermediate" is an analog variation of a digital intermediate, where a project shot on digital video is printed onto film stock and transferred back to digital video to emulate film. The term was coined after it was used on the Oscar-winning 2012 short film "Curfew". The process was also used on the films Dune (2021) and The Batman (2022). == History == Telecine tools to electronically capture film images are nearly as old as broadcast television, but the resulting images were widely considered unsuitable for exposing back onto film for theatrical distribution. Film scanners and recorders with quality sufficient to produce images that could be inter-cut with regular film began appearing in the 1970s, with significant improvements in the late 1980s and early 1990s. During this time, digitally processing an entire feature-length film was impractical because the scanners and recorders were extremely slow and the image files were too large compared to computing power available. Instead, individual shots or short sequences were processed for visual effects. In 1992, Visual Effects Supervisor/Producer Chris F. Woods broke through several "techno-barriers" in creating a digital studio to produce the visual effects for the 1993 release Super Mario Bros. It was the first feature film project to digitally scan a large number of VFX plates (over 700) at 2K resolution. It was also the first film scanned and recorded at Kodak's just launched Cinesite facility in Hollywood. This project based studio was the first feature film to use Discreet Logic's (now Autodesk) Flame and Inferno systems, which enjoyed early dominance as high resolution / high performance digital compositing systems. Digital film compositing for visual effects was immediately embraced, while optical printer use for VFX declined just as quickly. Chris Watts further revolutionized the process on the 1998 feature film Pleasantville, becoming the first visual effects supervisor for New Line Cinema to scan, process, and record the majority of a feature-length, live-action, Hollywood film digitally. The first Hollywood film to utilize a digital intermediate process from beginning to end was O Brother, Where Art Thou? in 2000 and in Europe it was Chicken Run released that same year. The process rapidly caught on in the mid-2000s. Around 50% of Hollywood films went through a digital intermediate in 2005, increasing to around 70% by mid-2007. This is due not only to the extra creative options the process affords film makers but also the need for high-quality scanning and color adjustments to produce movies for digital cinema. == Milestones == 1990: The Rescuers Down Under – First feature-length film to be entirely recorded to film from digital files; in this case animation assembled on computers using Walt Disney Feature Animation and Pixar's CAPS system. 1992: Visual effects supervisor and producer Chris F. Woods creates a VFX studio to produce the visual effects for the 1993 film Super Mario Bros. It was the first 35mm feature film to digitally scan a large number of VFX plates (over 700) at 2K resolution, as well as to output the finished VFX to 35mm negative at 2K. 1993: Snow White and the Seven Dwarfs – First film to be entirely scanned to digital files, manipulated, and recorded back to film at 4K resolution. The restoration project was done entirely at 4K resolution and 10-bit color depth using the Cineon system to digitally remove dirt and scratches and restore faded colors. 1998: Pleasantville – The first time the majority of a new feature film was scanned, processed, and recorded digitally. The black-and-white meets color world portrayed in the movie was filmed entirely in color and selectively desaturated and contrast adjusted digitally. The work was done in Los Angeles by Cinesite utilizing a Spirit DataCine for scanning at 2K resolution and a MegaDef color correction system from UK Company Pandora International 1998: Zingo - The first feature film to use digital color correction via digital intermediate in its entirety. The work was performed at the Digital Film Lab in Copenhagen, using a Spirit Datacine to transfer the entire film to digital files at 2K resolution. The digital intermediate process was also used to perform a digital blowup of the film's original Super 16 source format to a 35mm output. 1999: Pacific Ocean Post Film, a team led by John McCunn and Greg Kimble used Kodak film scanners & laser film printer, Cineon software as well as proprietary tools to rebuild and repair the first two reels of the 1968 Beatles' film Yellow Submarine for re-release. 1999: Star Wars: Episode I – The Phantom Menace - Industrial Light & Magic (ILM) scanned the entirety of the visual effects-laden film for the purposes of digital enhancement and the integration of thousands of separately filmed elements with computer generated characters and environments. Outside of the approximately 2000 effects shots that were digitally manipulated, the remaining 170 non-effects shots were also scanned for continuity. However, after the digital shots were manipulated at ILM, they were filmed out individually and sent to Deluxe Labs where they were processed and color timed photochemically. 2000: Sorted - The first feature-length, color 35mm motion picture to fully utilize the digital intermediate process in its entirety from inception to completion. The film was produced at Wave Pictures' digital intermediate film facility in London, England. It was scanned at 2K resolution with 8 bits color depth per color / per pixel using a pin registered, liquid gate Oxberry

  Read more →
• 

  Point distribution model

  The point distribution model is a model for representing the mean geometry of a shape and some statistical modes of geometric variation inferred from a training set of shapes. == Background == The point distribution model concept has been developed by Cootes, Taylor et al. and became a standard in computer vision for the statistical study of shape and for segmentation of medical images where shape priors really help interpretation of noisy and low-contrasted pixels/voxels. The latter point leads to active shape models (ASM) and active appearance models (AAM). Point distribution models rely on landmark points. A landmark is an annotating point posed by an anatomist onto a given locus for every shape instance across the training set population. For instance, the same landmark will designate the tip of the index finger in a training set of 2D hands outlines. Principal component analysis (PCA), for instance, is a relevant tool for studying correlations of movement between groups of landmarks among the training set population. Typically, it might detect that all the landmarks located along the same finger move exactly together across the training set examples showing different finger spacing for a flat-posed hands collection. == Details == First, a set of training images are manually landmarked with enough corresponding landmarks to sufficiently approximate the geometry of the original shapes. These landmarks are aligned using the generalized procrustes analysis, which minimizes the least squared error between the points. k {\displaystyle k} aligned landmarks in two dimensions are given as X = ( x 1 , y 1 , … , x k , y k ) {\displaystyle \mathbf {X} =(x_{1},y_{1},\ldots ,x_{k},y_{k})} . It's important to note that each landmark i ∈ { 1 , … k } {\displaystyle i\in \lbrace 1,\ldots k\rbrace } should represent the same anatomical location. For example, landmark #3, ( x 3 , y 3 ) {\displaystyle (x_{3},y_{3})} might represent the tip of the ring finger across all training images. Now the shape outlines are reduced to sequences of k {\displaystyle k} landmarks, so that a given training shape is defined as the vector X ∈ R 2 k {\displaystyle \mathbf {X} \in \mathbb {R} ^{2k}} . Assuming the scattering is gaussian in this space, PCA is used to compute normalized eigenvectors and eigenvalues of the covariance matrix across all training shapes. The matrix of the top d {\displaystyle d} eigenvectors is given as P ∈ R 2 k × d {\displaystyle \mathbf {P} \in \mathbb {R} ^{2k\times d}} , and each eigenvector describes a principal mode of variation along the set. Finally, a linear combination of the eigenvectors is used to define a new shape X ′ {\displaystyle \mathbf {X} '} , mathematically defined as: X ′ = X ¯ + P b {\displaystyle \mathbf {X} '={\overline {\mathbf {X} }}+\mathbf {P} \mathbf {b} } where X ¯ {\displaystyle {\overline {\mathbf {X} }}} is defined as the mean shape across all training images, and b {\displaystyle \mathbf {b} } is a vector of scaling values for each principal component. Therefore, by modifying the variable b {\displaystyle \mathbf {b} } an infinite number of shapes can be defined. To ensure that the new shapes are all within the variation seen in the training set, it is common to only allow each element of b {\displaystyle \mathbf {b} } to be within ± {\displaystyle \pm } 3 standard deviations, where the standard deviation of a given principal component is defined as the square root of its corresponding eigenvalue. PDM's can be extended to any arbitrary number of dimensions, but are typically used in 2D image and 3D volume applications (where each landmark point is R 2 {\displaystyle \mathbb {R} ^{2}} or R 3 {\displaystyle \mathbb {R} ^{3}} ). == Discussion == An eigenvector, interpreted in euclidean space, can be seen as a sequence of k {\displaystyle k} euclidean vectors associated to corresponding landmark and designating a compound move for the whole shape. Global nonlinear variation is usually well handled provided nonlinear variation is kept to a reasonable level. Typically, a twisting nematode worm is used as an example in the teaching of kernel PCA-based methods. Due to the PCA properties: eigenvectors are mutually orthogonal, form a basis of the training set cloud in the shape space, and cross at the 0 in this space, which represents the mean shape. Also, PCA is a traditional way of fitting a closed ellipsoid to a Gaussian cloud of points (whatever their dimension): this suggests the concept of bounded variation. The idea behind PDMs is that eigenvectors can be linearly combined to create an infinity of new shape instances that will 'look like' the one in the training set. The coefficients are bounded alike the values of the corresponding eigenvalues, so as to ensure the generated 2n/3n-dimensional dot will remain into the hyper-ellipsoidal allowed domain—allowable shape domain (ASD).

  Read more →
• 

  GlTF

  glTF (Graphics Library Transmission Format or GL Transmission Format and formerly known as WebGL Transmissions Format or WebGL TF) is a standard file format for three-dimensional scenes and models. A glTF file uses one of two possible file extensions: .gltf (JSON/ASCII) or .glb (binary). Both .gltf and .glb files may reference external binary and texture resources. Alternatively, both formats may be self-contained by directly embedding binary data buffers (as base64-encoded strings in .gltf files or as raw byte arrays in .glb files). An open standard developed and maintained by the Khronos Group, it supports 3D model geometry, appearance, scene graph hierarchy, and animation. It is intended to be a streamlined, interoperable format for the delivery of 3D assets, while minimizing file size and runtime processing by apps. As such, its creators have described it as the "JPEG of 3D". == Overview == The glTF format stores data primarily in JSON. The JSON may also contain blobs of binary data known as buffers, and refer to external files, for storing mesh data, images, etc. The binary .glb format also contains JSON text, but serialized with binary chunk headers to allow blobs to be directly appended to the file. The fundamental building blocks of a glTF scene are nodes. Nodes are organized into a hierarchy, such that a node may have other nodes defined as children. Nodes may have transforms relative to their parent. Nodes may refer to resources, such as meshes, skins, and cameras. Meshes may refer to materials, which refer to textures, which refer to images. Scenes are defined using an array of root nodes. Most of the top-level glTF properties use a flat hierarchy for storage. Nodes are saved in an array and are referred to by index, including by other nodes. A glTF scene refers to its root nodes by index. Furthermore, nodes refer to meshes by index, which refer to materials by index, which refer to textures by index, which refer to images by index. All glTF data structures support being extended using a JSON property, allowing arbitrary JSON data to be added. == Releases == === glTF 1.0 === Members of the COLLADA working group conceived the file format in 2012. At SIGGRAPH 2012, Khronos presented a demo of glTF, which was then called WebGL Transmissions Format (WebGL TF). On October 19, 2015, Khronos released the glTF 1.0 specification. ==== Adoption of glTF 1.0 ==== At SIGGRAPH 2016, Oculus announced their adoption of glTF citing the similarities to their ovrscene format. In October 2016, Microsoft joined the 3D Formats working group at Khronos to collaborate on glTF. === glTF 2.0 === The second version, glTF 2.0, was released in June 2017, and is a complete overhaul of the file format from version 1.0, with most tools adopting the 2.0 version. Based on a proposal by Fraunhofer originally presented at SIGGRAPH 2016, physically based rendering (PBR) was added, replacing WebGL shaders used in glTF 1.0. glTF 2.0 added the GLB binary format into the base specification. Other upgrades include sparse accessors and morph targets for techniques such as facial animation, and schema tweaks and breaking changes for corner cases or performance such as replacing top-level glTF object properties with arrays for faster index-based access. There is ongoing work towards import and export in Unity and an integrated multi-engine viewer and validator. ==== Adoption of glTF 2.0 ==== On March 3, 2017, Microsoft announced that they would be using glTF 2.0 as the 3D asset format across their product line, including Paint 3D, 3D Viewer, Remix 3D, Babylon.js, and Microsoft Office. Sketchfab also announced support for glTF 2.0. The glTF and GLB formats are used on and supported by companies including DGG, UX3D, Sketchfab, Facebook, Microsoft, Meta, Google, Adobe, Box, TurboSquid, Unreal Engine, Unity, and Qt Quick 3D. The format has been noted as an important standard for augmented reality, integrating with modeling software such as Autodesk Maya, Autodesk 3ds Max, and Poly. In February 2020, the Smithsonian Institution launched their Open Access Initiative, releasing approximately 2.8 million 2D images and 3D models into the public domain, using glTF for the 3D models. In July 2022, glTF 2.0 was released as the ISO/IEC 12113:2022 International Standard. Khronos stated they would make regular submissions to bring updates and new widely adopted glTF functionality into refreshed versions of ISO/IEC 12113 to ensure that there is no long-term divergence between the ISO/IEC and Khronos specifications. The open-source game engine Godot supports importing glTF 2.0 files since version 3.0 and export since version 4.0. === Extensions === The glTF format can be extended with arbitrary JSON to add new data and functionality. Extensions can be placed on any part of a glTF, including nodes, animations, materials, textures, and on the entire document. Khronos keeps a non-comprehensive registry of glTF extensions on GitHub, including all official Khronos extensions and a few third-party extensions. PBR extensions model the physical appearance of real-world objects, allowing developers to create realistic 3D assets that have the correct appearance. As new PBR extensions are released, they continue to expand PBR capabilities within the glTF framework, allowing a wider range of scenes and objects to be realistically rendered as 3D assets. The KTX 2.0 extension for universal texture compression enables 3D models in the glTF format to be highly compressed and to use natively supported texture formats, reducing file size and boosting rendering speed. Draco is a glTF extension for mesh compression, to compress and decompress 3D meshes, to help reduce the size of 3D files. It compresses vertex attributes, normals, colors, and texture coordinates. Various glTF extensions for game engine interoperability have been developed by OMI group. This includes extensions for physics shapes, physics bodies, physics joints, audio playback, seats, spawn points, and more. The VRM consortium has developed glTF extensions for advanced humanoid 3D avatars including dynamic spring bones and toon materials. == Derivative formats == 3D Tiles, an OGC Community Standard, builds on glTF to add a spatial data structure, metadata, and declarative styling for streaming massive heterogeneous 3D geospatial datasets. VRM, a model format for VR, is built on the .glb format. It is a 3D humanoid avatar specification and file format. == Software ecosystem == Khronos maintains the glTF Sample Viewer for viewing glTF assets. Khronos also maintains the glTF Validator for validating if 3D models conform to the glTF specification. Khronos maintains a glTF Compressor tool to interactively optimize and fine-tune compression settings for glTF assets using KTX 2.0 textures. glTF loaders are in open-source WebGL engines including PlayCanvas, Three.js, Babylon.js, Cesium, PEX, xeogl, and A-Frame. The Godot game engine supports and recommends the glTF format, with both import and export support. Open-source glTF converters are available from COLLADA, FBX, and OBJ. Assimp can import and export glTF. glTF files can also be directly exported from a variety of 3D editors, such as Blender, Unity (using the glTFast importer/exporter), Freecad, Vectary, Autodesk 3ds Max (natively or using Verge3D exporter), Autodesk Maya (using babylon.js exporter), Autodesk Inventor, Modo, Houdini, Paint 3D, Godot, and Substance Painter. Open-source glTF utility libraries are available for programming languages including JavaScript, Node.js, C++, C#, Python, Haskell, Java, Go, Rust, Haxe, Ada, and TypeScript. Khronos keeps a list of these libraries and other related applications on their ecosystem site. The Khronos 3D Commerce Working Group released Asset Creation Guidelines in 2020 outlining best practices for use of the glTF file format in 3D Commerce. In 2025, the Working Group launched Asset Creation Guidelines 2.0, a continuously updated resource with additional guidance for geometry, mesh optimization, UV maps, textures, materials/PBR performance, and web optimization. The Khronos PBR Neutral Tone Mappers specification is a tone mapper designed to faithfully reproduce an object's base color, hue, and saturation when using PBR rendering under grayscale lighting, supporting brand- and product-accurate color representation. Khronos maintains the glTF Asset Auditor to allow retailers and advertising technology platforms to validate 3D assets against either a default Audit Profile modelled on the 2020 3D Commerce Asset Creation Guidelines or a custom profile defined by the target application.

  Read more →
• 

  Attention inequality

  Attention inequality is the inequality of distribution of attention across users on social networks, people in general, and for scientific papers. Yun Family Foundation introduced "Attention Inequality Coefficient" as a measure of inequality in attention and arguments it by the close interconnection with wealth inequality. == Relationship to economic inequality == Attention inequality is related to economic inequality since attention is an economically scarce good. The same measures and concepts as in classical economy can be applied for attention economy. The relationship develops also beyond the conceptual level—considering the AIDA process, attention is the prerequisite for real monetary income on the Internet. On data of 2018, a significant relationship between likes and comments on Facebook to donations is proven for non-profit organizations. == Attention economy == The attention economy refers to the practice of maximizing the attention users give to a product for advertising-related reasons. Attention economy remains one of the most common forms of advertising, and has been steadily increasing thanks to new technologies such as television, internet and social media. It is one of the most widely-used approaches to economy for its effectiveness for maximising the noticeability of a certain product. == Attention inequality in social media == In social media, attention inequality refers to the unequal distribution of users' attention on social media platforms. This means that instead of an equal distribution of attention, fewer sources receive a disproportionate share of attention, leaving many unnoticed. This phenomenon is possibly the result of social media algorithms, which are commonly designed to drive maximum engagement. This phenomenon is a large factor in the polarization and creation of echo-chambers. Social media algorithms tend to note content that is already performing well and display it to more users, while content that is equally engaging or well-made is not recommended to users. Posts that trigger strong emotions usually out-perform more "uncontroversial" content. When many users interact with the post, it signals the algorithm that the specific post drives engagement. The algorithm then tends to recommend that type of content to an exponential number of people, potentially outperforming "un-emotional" content. These factors, when combined, tend to create an unequal social media environment. == Attention inequality in science == According to a recent 2025 study about research inequality among scientists published in Information Processing and Management, scientific discourse is restricted to a small group of connected scientists, and is frequently not an accurate representation of the whole scientific community. Using citation-network analysis in the fields of nanoscience and chemical physics, the study claims that a group of connected scientists has a significant notability in the scientific community. The calculated connection strength between these scientists is estimated to be about 4.5, the study also says that these authors cite each other four times more often than would be predicted in a random network, whereas ordinary scientists that exist outside of this group only reach an estimated connection strength of 0.9. The study findings suggest that that scientific attention is not distributed by merit, but rather by the connectedness of the scientists involved in the research. == Extent == As data of 2008 shows, 50% of the attention is concentrated on approximately 0.2% of all hostnames, and 80% on 5% of hostnames. The Gini coefficient of attention distribution lay in 2008 at over 0.921 for such commercial domains names as ac.jp and at 0.985 for .org-domains. The Gini coefficient was measured on Twitter in 2016 for the number of followers as 0.9412, for the number of mentions as 0.9133, and for the number of retweets as 0.9034. For comparison, the world's income Gini coefficient was 0.68 in 2005 and 0.904 in 2018. More than 96% of all followers, 93% of the retweets, and 93% of all mentions are owned by 20% of Twitter. == Causes == At least for scientific papers, today's consensus states that inequality is unexplainable by variations of quality and individual talent. The Matthew effect plays a significant role in the emergence of attention inequality—those who already enjoy large amounts of attention get even more attention, and those who do not lose even more. Ranking algorithms based on relevance to the user have been found to alleviate the inequality of the number of posts across topics.

  Read more →