AI Chat Picture

AI Chat Picture — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Generative art

  Generative art is post-conceptual art that has been created (in whole or in part) with the use of an autonomous system. An autonomous system in this context is generally one that is non-human and can independently determine features of an artwork that would otherwise require decisions made directly by the artist. In some cases the human creator may claim that the generative system represents their own artistic idea, and in others that the system takes on the role of the creator. "Generative art" often refers to algorithmic art (algorithmically determined computer generated artwork) and synthetic media (general term for any algorithmically generated media), but artists can also make generative art using systems of chemistry, biology, mechanics and robotics, smart materials, manual randomization, mathematics, data mapping, symmetry, and tiling. Generative algorithms, algorithms programmed to produce artistic works through predefined rules, stochastic methods, or procedural logic, often yielding dynamic, unique, and contextually adaptable outputs—are central to many of these practices. == History == The use of the word "generative" in the discussion of art has developed over time. The use of "Artificial DNA" defines a generative approach to art focused on the construction of a system able to generate unpredictable events, all with a recognizable common character. The use of autonomous systems, required by some contemporary definitions, focuses a generative approach where the controls are strongly reduced. This approach is also named "emergent". Margaret Boden and Ernest Edmonds have noted the use of the term "generative art" in the broad context of automated computer graphics in the 1960s, beginning with artwork exhibited by Georg Nees and Frieder Nake in 1965: A. Michael Noll did his initial computer art, combining randomness with order, in 1962, and exhibited it along with works by Bell Julesz in 1965. The terms "generative art" and "computer art" have been used in tandem, and more or less interchangeably, since the very earliest days. The first such exhibition showed the work of Nees in February 1965, which some claim was titled "Generative Computergrafik". While Nees does not himself remember, this was the title of his doctoral thesis published a few years later. The correct title of the first exhibition and catalog was "computer-grafik". "Generative art" and related terms was in common use by several other early computer artists around this time, including Manfred Mohr and Ken Knowlton. Vera Molnár (born 1924) is a French media artist of Hungarian origin. Molnar is widely considered to be a pioneer of generative art, and is also one of the first women to use computers in her art practice. The term "Generative Art" with the meaning of dynamic artwork-systems able to generate multiple artwork-events was clearly used the first time for the "Generative Art" conference in Milan in 1998. The term has also been used to describe geometric abstract art where simple elements are repeated, transformed, or varied to generate more complex forms. Thus defined, generative art was practiced by the Argentinian artists Eduardo Mac Entyre and Miguel Ángel Vidal in the late 1960s. In 1972 the Romanian-born Paul Neagu created the Generative Art Group in Britain. It was populated exclusively by Neagu using aliases such as "Hunsy Belmood" and "Edward Larsocchi". In 1972 Neagu gave a lecture titled 'Generative Art Forms' at the Queen's University, Belfast Festival. In 1970 the School of the Art Institute of Chicago created a department called Generative Systems. As described by Sonia Landy Sheridan the focus was on art practices using the then new technologies for the capture, inter-machine transfer, printing and transmission of images, as well as the exploration of the aspect of time in the transformation of image information. Also noteworthy is John Dunn, first a student and then a collaborator of Sheridan. In 1988 Clauser identified the aspect of systemic autonomy as a critical element in generative art: It should be evident from the above description of the evolution of generative art that process (or structuring) and change (or transformation) are among its most definitive features, and that these features and the very term 'generative' imply dynamic development and motion. (the result) is not a creation by the artist but rather the product of the generative process - a self-precipitating structure. In 1989 Celestino Soddu defined the Generative Design approach to Architecture and Town Design in his book Citta' Aleatorie. In 1989 Franke referred to "generative mathematics" as "the study of mathematical operations suitable for generating artistic images." From the mid-1990s Brian Eno popularized the terms generative music and generative systems, making a connection with earlier experimental music by Terry Riley, Steve Reich and Philip Glass. From the end of the 20th century, communities of generative artists, designers, musicians and theoreticians began to meet, forming cross-disciplinary perspectives. The first meeting about generative Art was in 1998, at the inaugural International Generative Art conference at Politecnico di Milano University, Italy. In Australia, the Iterate conference on generative systems in the electronic arts followed in 1999. On-line discussion has centered around the eu-gene mailing list, which began late 1999, and has hosted much of the debate which has defined the field. These activities have more recently been joined by the Generator.x conference in Berlin starting in 2005. In 2012 the new journal GASATHJ, Generative Art Science and Technology Hard Journal was founded by Celestino Soddu and Enrica Colabella jointing several generative artists and scientists in the editorial board. Some have argued that as a result of this engagement across disciplinary boundaries, the community has converged on a shared meaning of the term. As Boden and Edmonds put it in 2011: Today, the term "Generative Art" is still current within the relevant artistic community. Since 1998 a series of conferences have been held in Milan with that title (Generativeart.com), and Brian Eno has been influential in promoting and using generative art methods (Eno, 1996). Both in music and in visual art, the use of the term has now converged on work that has been produced by the activation of a set of rules and where the artist lets a computer system take over at least some of the decision-making (although, of course, the artist determines the rules). In the call of the Generative Art conferences in Milan (annually starting from 1998), the definition of Generative Art by Celestino Soddu: Generative Art is the idea realized as genetic code of artificial events, as construction of dynamic complex systems able to generate endless variations. Each Generative Project is a concept-software that works producing unique and non-repeatable events, like music or 3D Objects, as possible and manifold expressions of the generating idea strongly recognizable as a vision belonging to an artist / designer / musician / architect /mathematician. Discussion on the eu-gene mailing list was framed by the following definition by Adrian Ward from 1999: Generative art is a term given to work which stems from concentrating on the processes involved in producing an artwork, usually (although not strictly) automated by the use of a machine or computer, or by using mathematic or pragmatic instructions to define the rules by which such artworks are executed. A similar definition is provided by Philip Galanter: Generative art refers to any art practice where the artist creates a process, such as a set of natural language rules, a computer program, a machine, or other procedural invention, which is then set into motion with some degree of autonomy contributing to or resulting in a completed work of art. Around the 2020s, generative AI models learned to imitate the distinct style of particular authors. For example, a generative image model such as Stable Diffusion is able to model the stylistic characteristics of an artist like Pablo Picasso (including his particular brush strokes, use of colour, perspective, and so on), and a user can engineer a prompt such as "an astronaut riding a horse, by Picasso" to cause the model to generate a novel image applying the artist's style to an arbitrary subject. Generative image models have received significant backlash from artists who object to their style being imitated without their permission, arguing that this harms their ability to profit from their own work. The emergence of text-to-image generative AI systems has expanded debates over authorship, copyright, and artistic labor. The main issues in these debates include the eligibility of AI-generated outputs for copyright protection and the legal and ethical questions of using existing copyrighted works as training data for generative AI systems. == Types == === Music === Johann Kirnberger's Mu

  Read more →
• 

  Imix video cube

  The Imix (also known as ImMix) Video Cube is one of the first computer non-linear editing systems that was a full broadcast quality online video finishing machine. After its release in 1994, Imix released a more advanced version, the Imix Turbo Cube, which boasted 4 channels of real time layered visual effects. It was a hardware computer system controlled by an Apple Macintosh computer.

  Read more →
• 

  Teleradiology

  Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.

  Read more →
• 

  CamScanner

  CamScanner is a Chinese mobile app first released in 2010 that allows iOS and Android devices to be used as image scanners. It allows users to 'scan' documents (by taking a photo with the device's camera) and share the photo as either a JPEG or PDF. This app is available free of charge on the Google Play Store and the Apple App Store. The app is based on freemium model, with ad-supported free version and a premium version with additional functions. == History == On August 27, 2019, Russian cyber security company Kaspersky Lab discovered that recent versions of the Android app distributed an advertising library containing a Trojan Dropper, which was also included in some apps preinstalled on several Chinese mobiles. The advertising library decrypts a Zip archive which subsequently downloads additional files from servers controlled by hackers, allowing the hackers to control the device, including by showing intrusive advertising or charging paid subscriptions. Google took the app down after Kaspersky reported its findings. An updated version of the app with the advertising library removed was made available on the Google Play Store as of September 5, 2019. Kaspersky later acknowledged "We appreciate the willingness to cooperate that we've seen from CamScanner representatives, as well as the responsible attitude to user safety they demonstrated while eliminating the threat…The malicious modules were removed from the app immediately upon Kaspersky's warning, and Google Play has restored the app." In June 2020, as tensions along the Line of Actual Control between China and India continued, the Government of India decided to ban 118 Chinese apps, including TikTok and CamScanner citing data and privacy issues. On January 5, 2021, US President Donald Trump signed Executive Order 13971 banning Alipay, Tencent's QQ, QQ Wallet, WeChat Pay, CamScanner, Shareit, VMate and WPS Office to conduct US transactions. The Trump administration explained this act by saying that this move helps prevent personal information such as text, phone calls and photos collected from rivals. However, the Biden administration did not meet the February 2021 deadline for implementing the executive order, allowing these apps to operate in the US and revoked the previous executive order Executive Order 14034 of June 9, 2021.

  Read more →
• 

  RIPAC (microprocessor)

  RIPAC was a VLSI single-chip microprocessor designed for automatic recognition of the connected speech, one of the first of this use. The project of the microprocessor RIPAC started in 1984. RIPAC was aimed to provide efficient real-time speech recognition services to the italian telephone system provided by SIP. The microprocessor was presented in September 1986 at The Hague (Netherlands) at EUSPICO conference. It was composed of 70.000 transistors and structured as Harvard architecture. The name RIPAC is the acronym for "Riconoscimento del PArlato Connesso", that means "Recognition of the connected speech" in Italian. The microprocessor was designed by the Italian companies CSELT and ELSAG and was produced by SGS: a combination of Hidden Markov Model and Dynamic Time Warping algorithms was used for processing speech signals. It was able to do real-time speech recognition of Italian and many languages with a good affordability. The chip, issued by U.S. Patent No. 4,907,278, worked at first run.

  Read more →
• 

  Digital art

  Digital art, or the digital arts, is artistic work that uses digital technology as part of the creative or presentational process. It can also refer to computational art that uses and engages with digital media. Since the 1960s, various names have been used to describe digital art, including computer art, electronic art, multimedia art, and new media art. Digital art includes pieces stored on physical media, such as with digital painting, as well as digital galleries on websites. Digital art also extends to the field of visual computing. == History == In the early 1960s, John Whitney developed the first computer-generated art using mathematical operations. In 1963, Ivan Sutherland invented the first user interactive computer-graphics interface known as Sketchpad. Between 1974 and 1977, Salvador Dalí created two big canvases of Gala Contemplating the Mediterranean Sea which at a distance of 20 meters is transformed into the portrait of Abraham Lincoln (Homage to Rothko) and prints of Lincoln in Dalivision based on a portrait of Abraham Lincoln processed on a computer by Leon Harmon published in "The Recognition of Faces". The technique is similar to what later became known as photographic mosaics. Andy Warhol created digital art using an Amiga where the computer was publicly introduced at the Lincoln Center in July 1985. An image of Debbie Harry was captured in monochrome from a video camera and digitized into a graphics program called ProPaint. Warhol manipulated the image by adding color using flood fills. == Art made for digital media == Artwork that is highly computational, presented through digital media, and explicitly engages with digital technologies are categorized as "art made for digital media". This differs from art using digital tools, which incorporate digital technology in the creation process but may exist outside the digital world. Digital art historian Christiane Paul writes that it "is highly problematic to classify all art that makes use of digital technologies somewhere in its production and dissemination process as digital art since it makes it almost impossible to arrive at any unifying statement about the art form". == Art that uses digital tools == Digital art can be purely computer-generated (such as fractals and algorithmic art) or taken from other sources, such as a scanned photograph or an image drawn using vector graphics software using a mouse or graphics tablet. Artworks are considered digital paintings when created similarly to non-digital paintings but using software on a computer platform and digitally outputting the resulting image as painted on canvas. Despite differing viewpoints on digital technology's impact on the arts, a consensus exists within the digital art community about its significant contribution to expanding the creative domain, i.e., that it has greatly broadened the creative opportunities available to professional and non-professional artists alike. == Art theorists and art historians == Notable art theorists and historians in this field include: Oliver Grau, Jon Ippolito, Christiane Paul, Frank Popper, Jasia Reichardt, Mario Costa, Christine Buci-Glucksmann, Dominique Moulon, Roy Ascott, Catherine Perret, Margot Lovejoy, Edmond Couchot, Tina Rivers Ryan, Fred Forest and Edward A. Shanken. === Digital painting === Digital painting is either a physical painting made with the use of digital electronics and spray paint robotics within the digital art fine art context or pictorial art imagery made with pixels on a computer screen that mimics artworks from the traditional histories of painting and illustration. === Artificial intelligence art === Artists have used artificial intelligence to create artwork since at least the 1960s. Since their design in 2014, some artists have created artwork using a generative adversarial network (GAN), which is a machine learning framework that allows two "algorithms" to compete with each other and iterate. It can be used to generate pictures that have visual effects similar to traditional fine art. The essential idea of image generators is that people can use text descriptions to let AI convert their text into visual picture content. Anyone can turn their language into a painting through a picture generator. == Digital art education == Digital art education has become more common with the advancement of digital hardware and software. From hardware such as graphics tablets, styluses, tablets, 3D scanners, virtual reality headsets, and digital cameras; to software such as digital art software, 3D modeling software, 3D rendering, digital sculpting, 2D graphics software, digital painting, 3D terrain generation, 2D animation software, 3D animation software, raster graphics editors, vector graphics editors, mathematical art software, and video editing software. == Scholarship and archives == In addition to the creation of original art, research methods that utilize AI have been generated to quantitatively analyze digital art collections. This has been made possible due to the large-scale digitization of artwork in the past few decades. Although the main goal of digitization was to allow for accessibility and exploration of these collections, the use of AI in analyzing them has brought about new research perspectives. Two computational methods, close reading and distant viewing, are the typical approaches used to analyze digitized art. Close reading focuses on specific visual aspects of one piece. Some tasks performed by machines in close reading methods include computational artist authentication and analysis of brushstrokes or texture properties. In contrast, through distant viewing methods, the similarity across an entire collection for a specific feature can be statistically visualized. Common tasks relating to this method include automatic classification, object detection, multimodal tasks, knowledge discovery in art history, and computational aesthetics. Whereas distant viewing includes the analysis of large collections, close reading involves one piece of artwork. Whilst 2D and 3D digital art is beneficial as it allows the preservation of history that would otherwise have been destroyed by events like natural disasters and war, there is the issue of who should own these 3D scans – i.e., who should own the digital copyrights. === Computer demos === Computer demos are based on computer programs, usually non-interactive. It produces audiovisual presentations. They are a novel form of art, which emerged as a consequence of the home computer revolution in the early 1980s. In the classification of digital art, they can be best described as real-time procedurally generated animated audio-visuals. This form of art does not concentrate only on the aesthetics of the final presentation, but also on the complexities and skills involved in creating the presentation. As such, it can be fully enjoyed only by persons with a relatively high knowledge level of relevant computer technologies. An example is that, as said by Hua Jin and Jie Yang, Using computer-aided design software to present the class content in art design teaching," is not to advocate computer-aided design instead of hand-drawn performance, but to make it serve the profession earlier through a more reasonable course arrangement." On the other hand, many of the created pieces of art are primarily aesthetic or amusing, and those can be enjoyed by the general public. === Digital installation art === Digital installation art constitutes a broad field of artistic practices and a variety of forms. Some resemble video installations, especially large-scale works involving projections and live video capture. By using projection techniques that enhance an audience's impression of sensory envelopment, many digital installations attempt to create immersive environments. While others go even further and attempt to facilitate a complete immersion in virtual realms. This type of installation is generally site-specific, scalable, and without fixed dimensionality, meaning it can be reconfigured to accommodate different presentation spaces. Scott Snibbe's "Boundary Functions" is an example of augmented reality digital installation art, which responds to people who enter the installation by drawing lines between people, indicating their personal space.Noah Wardrip-Fruin's "Screen"(2003) utilizes a Cave Automatic Virtual Environment (CAVE) to create an interactive, text-based digital experience that engages the viewer in a multi-sensory interaction. === Internet art and net.art === Internet art is digital art that uses the specific characteristics of the Internet and is exhibited on the Internet. The term "internet art" is included by "net art" for which artists assume that network will be refreshed through history. So the term "post-internet art" is used to exclude artworks outside of the internet media. A representative example is Protocols for Achievements, which is a digital photo frame that confronts the aestheti

  Read more →
• 

  Distribution management system

  A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this

  Read more →
• 

  Cups (app)

  Cups (stylized as CUPS) was a mobile app launched in New York City in April 2014. It was a mobile payment and discovery platform for independent coffee shops nearby. The app was active in more than 400 cafes in New York, San Francisco, Philadelphia, Nashville, Minneapolis and Saint Paul, and other U.S. cities. == History == Cups was founded in Israel in 2012 by Gilad Rotem and four other co-founders, who were all high school friends. The company ran a limited beta pilot in Tel Aviv and Jerusalem, featuring 80 locations, from September 2012 until September 2014. Customers received all-you-can-drink coffee at certain coffee shops in Tel Aviv for approximately $45 a month. In October 2013, the founders relocated to New York. Cups participated in the Entrepreneur's Roundtable Accelerator program and went live in New York in 2014, initially working with 50 small coffee shops in Manhattan and Brooklyn. In early 2016, the company launched 30 locations in Philadelphia in February, followed by 40 more locations in San Francisco in March. == Functionality == The Cups app gave the user a list of the nearest participating coffee shops to their current location. The app user can order a drink using the app and pay the cashier with their phone. The cashier would enter a code that entered the purchase into the app's system. The app also allowed for onboard tipping and food purchases. The company reimbursed the coffee shop and kept a portion of their sales. In early 2016, the Cups Café Network was launched, using bulk purchasing power to land discounts with service providers which would normally be reserved for larger chains. In this way, the company aimed to help its café partners compete with the larger coffee chains.

  Read more →
• 

  Template matching

  Template matching is a technique in digital image processing for finding small parts of an image which match a template image. It can be used for quality control in manufacturing, navigation of mobile robots, or edge detection in images. The main challenges in a template matching task are detection of occlusion, when a sought-after object is partly hidden in an image; detection of non-rigid transformations, when an object is distorted or imaged from different angles; sensitivity to illumination and background changes; background clutter; and scale changes. == Feature-based approach == The feature-based approach to template matching relies on the extraction of image features, such as shapes, textures, and colors, that match the target image or frame. This approach is usually achieved using neural networks and deep-learning classifiers such as VGG, AlexNet, and ResNet.Convolutional neural networks (CNNs), which many modern classifiers are based on, process an image by passing it through different hidden layers, producing a vector at each layer with classification information about the image. These vectors are extracted from the network and used as the features of the image. Feature extraction using deep neural networks, like CNNs, has proven extremely effective has become the standard in state-of-the-art template matching algorithms. This feature-based approach is often more robust than the template-based approach described below. As such, it has become the state-of-the-art method for template matching, as it can match templates with non-rigid and out-of-plane transformations, as well as high background clutter and illumination changes. == Template-based approach == For templates without strong features, or for when the bulk of a template image constitutes the matching image as a whole, a template-based approach may be effective. Since template-based matching may require sampling of a large number of data points, it is often desirable to reduce the number of sampling points by reducing the resolution of search and template images by the same factor before performing the operation on the resultant downsized images. This pre-processing method creates a multi-scale, or pyramid, representation of images, providing a reduced search window of data points within a search image so that the template does not have to be compared with every viable data point. Pyramid representations are a method of dimensionality reduction, a common aim of machine learning on data sets that suffer the curse of dimensionality. == Common challenges == In instances where the template may not provide a direct match, it may be useful to implement eigenspaces to create templates that detail the matching object under a number of different conditions, such as varying perspectives, illuminations, color contrasts, or object poses. For example, if an algorithm is looking for a face, its template eigenspaces may consist of images (i.e., templates) of faces in different positions to the camera, in different lighting conditions, or with different expressions (i.e., poses). It is also possible for a matching image to be obscured or occluded by an object. In these cases, it is unreasonable to provide a multitude of templates to cover each possible occlusion. For example, the search object may be a playing card, and in some of the search images, the card is obscured by the fingers of someone holding the card, or by another card on top of it, or by some other object in front of the camera. In cases where the object is malleable or poseable, motion becomes an additional problem, and problems involving both motion and occlusion become ambiguous. In these cases, one possible solution is to divide the template image into multiple sub-images and perform matching on each subdivision. == Deformable templates in computational anatomy == Template matching is a central tool in computational anatomy (CA). In this field, a deformable template model is used to model the space of human anatomies and their orbits under the group of diffeomorphisms, functions which smoothly deform an object. Template matching arises as an approach to finding the unknown diffeomorphism that acts on a template image to match the target image. Template matching algorithms in CA have come to be called large deformation diffeomorphic metric mappings (LDDMMs). Currently, there are LDDMM template matching algorithms for matching anatomical landmark points, curves, surfaces, volumes. == Template-based matching explained using cross correlation or sum of absolute differences == A basic method of template matching sometimes called "Linear Spatial Filtering" uses an image patch (i.e., the "template image" or "filter mask") tailored to a specific feature of search images to detect. This technique can be easily performed on grey images or edge images, where the additional variable of color is either not present or not relevant. Cross correlation techniques compare the similarities of the search and template images. Their outputs should be highest at places where the image structure matches the template structure, i.e., where large search image values get multiplied by large template image values. This method is normally implemented by first picking out a part of a search image to use as a template. Let S ( x , y ) {\displaystyle S(x,y)} represent the value of a search image pixel, where ( x , y ) {\displaystyle (x,y)} represents the coordinates of the pixel in the search image. For simplicity, assume pixel values are scalar, as in a greyscale image. Similarly, let T ( x t , y t ) {\textstyle T(x_{t},y_{t})} represent the value of a template pixel, where ( x t , y t ) {\textstyle (x_{t},y_{t})} represents the coordinates of the pixel in the template image. To apply the filter, simply move the center (or origin) of the template image over each point in the search image and calculate the sum of products, similar to a dot product, between the pixel values in the search and template images over the whole area spanned by the template. More formally, if ( 0 , 0 ) {\displaystyle (0,0)} is the center (or origin) of the template image, then the cross correlation T ⋆ S {\displaystyle T\star S} at each point ( x , y ) {\displaystyle (x,y)} in the search image can be computed as: ( T ⋆ S ) ( x , y ) = ∑ ( x t , y t ) ∈ T T ( x t , y t ) ⋅ S ( x t + x , y t + y ) {\displaystyle (T\star S)(x,y)=\sum _{(x_{t},y_{t})\in T}T(x_{t},y_{t})\cdot S(x_{t}+x,y_{t}+y)} For convenience, T {\displaystyle T} denotes both the pixel values of the template image as well as its domain, the bounds of the template. Note that all possible positions of the template with respect to the search image are considered. Since cross correlation values are greatest when the values of the search and template pixels align, the best matching position ( x m , y m ) {\displaystyle (x_{m},y_{m})} corresponds to the maximum value of T ⋆ S {\displaystyle T\star S} over S {\displaystyle S} . Another way to handle translation problems on images using template matching is to compare the intensities of the pixels, using the sum of absolute differences (SAD) measure. To formulate this, let I S ( x s , y s ) {\displaystyle I_{S}(x_{s},y_{s})} and I T ( x t , y t ) {\displaystyle I_{T}(x_{t},y_{t})} denote the light intensity of pixels in the search and template images with coordinates ( x s , y s ) {\displaystyle (x_{s},y_{s})} and ( x t , y t ) {\displaystyle (x_{t},y_{t})} , respectively. Then by moving the center (or origin) of the template to a point ( x , y ) {\displaystyle (x,y)} in the search image, as before, the sum of absolute differences between the template and search pixel intensities at that point is: S A D ( x , y ) = ∑ ( x t , y t ) ∈ T | I T ( x t , y t ) − I S ( x t + x , y t + y ) | {\displaystyle SAD(x,y)=\sum _{(x_{t},y_{t})\in T}\left\vert I_{T}(x_{t},y_{t})-I_{S}(x_{t}+x,y_{t}+y)\right\vert } With this measure, the lowest SAD gives the best position for the template, rather than the greatest as with cross correlation. SAD tends to be relatively simple to implement and understand, but it also tends to be relatively slow to execute. A simple C++ implementation of SAD template matching is given below. == Implementation == In this simple implementation, it is assumed that the above described method is applied on grey images: This is why Grey is used as pixel intensity. The final position in this implementation gives the top left location for where the template image best matches the search image. One way to perform template matching on color images is to decompose the pixels into their color components and measure the quality of match between the color template and search image using the sum of the SAD computed for each color separately. == Speeding up the process == In the past, this type of spatial filtering was normally only used in dedicated hardware solutions because of the computational complexity of the operation, however we can lessen this complexity b

  Read more →
• 

  Flexidraw

  Flexidraw is a 1985 graphics computer program published by Inkwell Systems. == Gameplay == Flexidraw is a graphics program that allows users to produce drawings using a light pen and print them. == Reception == Roy Wagner reviewed the product for Computer Gaming World, and stated that "Of the many graphics programs available Flexidraw is certainly the best supported by it's [sic] parent company."

  Read more →
• 

  Signal transfer function

  The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}

  Read more →
• 

  VideoThang

  VideoThang was free video editing software for Windows 2000, XP, and Vista. The software has three parts to it which are My Stuff, Edit My Stuff, and My Mix. The software accepts MOV, AVI, MPG, MP4, PNG, WMV, FLV, and MP3 standards. Its official website is now no longer available. == Reception == Jan Ozer, of Pcmag, said that the software "suffers from several unfortunate design and implementation flaws that dramatically limit output quality and overall utility." Jon L. Jacobi, of PC World, said that the software "may not be the most flexible multimedia editor in the world, but the trim/zoom basics are there, it's free, and it's so simple to use that just about anyone in the world should be able figure it out." Amit Agarwal, of Digital Inspiration, said that the software "doesn’t offer loads of features like other video editors but is perfect for making quick video slideshows of your pictures that you can upload on the web or share via email."

  Read more →
• 

  Deep tomographic reconstruction

  Deep Tomographic Reconstruction is a set of methods for using deep learning methods to perform tomographic reconstruction of medical and industrial images. It uses artificial intelligence and machine learning, especially deep artificial neural networks or deep learning, to overcome challenges such as measurement noise, data sparsity, image artifacts, and computational inefficiency. This approach has been applied across various imaging modalities, including CT, MRI, PET, SPECT, ultrasound, and optical imaging == Historical background == Traditional tomographic reconstruction relies on analytic methods such as filtered back-projection, or iterative methods which incrementally compute inverse transformations from measurement data (e.g., Radon or Fourier transform data). However, these approaches are not sufficient for certain imaging techniques such as low-dose CT and fast MRI, or scenarios involving metal artifacts and patient motion. == Use in imaging modalities == === Computed tomography (CT) === In CT, deep learning models can be particularly effective in reducing radiation exposure while maintaining image quality. Deep neural networks can also be able to reconstruct images of fair quality from sparsely sampled data without sacrificing diagnostic performance. Deep learning-based generative AI models can reduce CT metal artifacts. === Magnetic resonance imaging (MRI) === In magnetic resonance imaging (MRI), deep learning can lead to reduced MRI motion artifacts, and increased acquisition speed, referred to as fast MRI. Despite suffering from disadvantages such as lower signal-to-noise ratio (SNR), deep learning can enhance image quality in low field MRI, making these systems clinically viable. === Positron emission tomography (PET) and single-photon emission CT (SPECT) === For PET imaging, deep learning models can provide substantial improvements in low-dose imaging and motion artifact correction. Also, deep learning can help SPECT for generation of attenuation background. A notable technique for PET denoising involves integrating MR data through multimodal networks, which use anatomical information from MRI to enhance PET image quality. === Ultrasound imaging === Deep learning can enhance ultrasound imaging by reducing speckle noise and motion blur. For ultrasound beamforming, deep neural networks can allow superior image quality with limited data at high speed. === Optical imaging and microscopy === Diffuse optical tomography, optical coherence tomography and microscopy can be improved by deep neural networks beyond traditional methods. Furthermore, deep learning can also enhance Photoacoustic imaging (see Deep learning in photoacoustic imaging), addressing challenges like high noise, low contrast, and limited resolution. Deep learning has also been applied to label-free live-cell imaging, where convolutional neural networks predict fluorescence labels from transmitted light images, a technique known as in silico labeling. This method can enable high-throughput, non-invasive cell analysis and phenotyping without the need for traditional fluorescent dyes.

  Read more →
• 

  Autonomous things

  Autonomous things, abbreviated AuT, or the Internet of autonomous things, abbreviated as IoAT, is an emerging term for the technological developments that are expected to bring computers into the physical environment as autonomous entities without human direction, freely moving and interacting with humans and other objects. Self-navigating drones are the first AuT technology in (limited) deployment. It is expected that the first mass-deployment of AuT technologies will be the autonomous car, generally expected to be available around 2020. Other currently expected AuT technologies include home robotics (e.g., machines that provide care for the elderly, infirm or young), and military robots (air, land or sea autonomous machines with information-collection or target-attack capabilities). AuT technologies share many common traits, which justify the common notation. They are all based on recent breakthroughs in the domains of (deep) machine learning and artificial intelligence. They all require extensive and prompt regulatory developments to specify the requirements from them and to license and manage their deployment (see the further reading below). And they all require unprecedented levels of safety (e.g., automobile safety) and security, to overcome concerns about the potential negative impact of the new technology. As an example, the autonomous car both addresses the main existing safety issues and creates new issues. It is expected to be much safer than existing vehicles, by eliminating the single most dangerous element – the driver. The US's National Highway Traffic Safety Administration estimates 94 percent of US accidents were the result of human error and poor decision-making, including speeding and impaired driving, and the Center for Internet and Society at Stanford Law School claims that "Some ninety percent of motor vehicle crashes are caused at least in part by human error". So while safety standards like the ISO 26262 specify the required safety, there is still a burden on the industry to demonstrate acceptable safety. While car accidents claim every year 35,000 lives in the US, and 1.25 million worldwide, some believe that even "a car that's 10 times as safe, which means 3,500 people die on the roads each year [in the US alone]" would not be accepted by the public. The acceptable level may be closer to the current figures on aviation accidents and incidents, with under a thousand worldwide deaths in most years – three orders of magnitude lower than cars. This underscores the unprecedented nature of the safety requirements that will need to be met for cars, with similar levels of safety expected for other Autonomous Things.

  Read more →
• 

  Clue (mobile app)

  Clue is a menstrual health app developed by the Berlin-based technology company BioWink GmbH. The app has over 15 million users from 180 countries. The startup has raised over $17 million from backers that include Union Square Ventures and Mosaic Ventures. == History == Clue was co-founded by Ida Tin, Hans Raffauf, Mike LaVigne and Moritz von Buttlar in 2012. BioWink GmbH launched the app in 2013. Ida Tin's stated goal was to take female reproductive health “out of taboo land” and to start “a reproductive health revolution.” Tin previously led motorbike tours around the world and wrote a book about her experience. By July 2017, the Clue app had more than 8 million active users on both Android and iOS. Users were representative of more than 180 countries. In 2015, BioWink GmbH closed a $7 million Series A funding round led by Union Square Ventures and Mosaic Ventures, bringing the company's total funding to $10 million. The company was listed as one of Europe's Hottest Startups in 2015 by Wired UK, with Clue being named one of the best apps in 2015 by both Apple and Google. In March 2018, the company launched an editorial site to serve as a resource for accessible and scientific menstrual health information. == Mobile app == The Clue mobile application calculates and predicts a user's period, fertile window, and premenstrual syndrome. It also informs users the most or least likely time for becoming pregnant and allows them to track more than 30 health categories, including sex, sleep, pain, exercise, hair, skin, digestion, emotions and energy. The app can also explain how pill dosages impact fertility and includes an alarm system to allow for reminders for taking pills. In 2015, the company closed a Series A funding round and announced plans to use the proceeds to expand features of the mobile app and hire more staff. Clue also partnered with universities such as Stanford University, Columbia University, University of Washington, and University of Oxford to advance female health research. Clue integrated with Apple Inc.'s HealthKit for iOS 9 in September 2015, allowing data such as body temperature, cervical mucus quality, menstruation, ovulation test results, sexual activity, and spotting directly to the app. In 2016, Clue was available in 15 languages on both iOS and Android. That same year, Clue introduced a cycle-sharing feature and in 2017 a pill-tracking option. In February 2018, Clue made its app available on the Fitbit Ionic smartwatch. In 2026, Clue partnered with UK-based digital healthcare platform Evaro, an NHS-licensed provider, to offer embedded prescription services within the app.

  Read more →