AI Chat Sites

AI Chat Sites — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Kernel-phase

Kernel-phases are observable quantities used in high resolution astronomical imaging used for superresolution image creation. It can be seen as a generalization of closure phases for redundant arrays. For this reason, when the wavefront quality requirement are met, it is an alternative to aperture masking interferometry that can be executed without a mask while retaining phase error rejection properties. The observables are computed through linear algebra from the Fourier transform of direct images. They can then be used for statistical testing, model fitting, or image reconstruction. == Prerequisites == In order to extract kernel-phases from an image, some requirements must be met: Images are nyquist-sampled (at least 2 pixels per resolution element ( λ D {\displaystyle {\frac {\lambda }{D}}} )) Images are taken in near monochromatic light Exposure time is shorter than the timescale of aberrations Strehl ratio is high (good adaptive optics) Linearity of the pixel response (i.e. no saturation) Deviations from these requirements are known to be acceptable, but lead to observational bias that should be corrected by the observation of calibrators. == Definition == The method relies on a discrete model of the instrument's pupil plane and the corresponding list of baselines to provide corresponding vectors φ {\displaystyle \varphi } of pupil plane errors and Φ {\displaystyle \Phi } of image plane Fourier Phases. When the wavefront error in the pupil plane is small enough (i.e. when the Strehl ratio of the imaging system is sufficiently high), the complex amplitude associated to the instrumental phase in one point of the pupil φ k {\displaystyle \varphi _{k}} , can be approximated by e i φ k ≈ 1 + i φ k {\displaystyle e^{i\varphi _{k}}\approx 1+{\mathit {i}}\varphi _{k}} . This permits the expression of the pupil-plane phase aberrations φ {\displaystyle \varphi } to the image plane Fourier phase as a linear transformation described by the matrix A {\displaystyle A} : Φ = Φ 0 + A ⋅ φ {\displaystyle \Phi =\Phi _{0}+A\cdot \varphi } Where Φ 0 {\displaystyle \Phi _{0}} is the theoretical Fourier phase vector of the object. In this formalism, singular value decomposition can be used to find a matrix K {\displaystyle K} satisfying K ⋅ A = 0 {\displaystyle K\cdot A=0} . The rows of K {\displaystyle K} constitute a basis of the kernel of A T {\displaystyle A^{T}} . K ⋅ Φ = K ⋅ Φ 0 + K ⋅ A ⋅ φ {\displaystyle K\cdot \Phi =K\cdot \Phi _{0}+{\cancel {K\cdot A\cdot \varphi }}} The vector K . Φ {\displaystyle K.\Phi } is called the kernel-phase vector of observables. This equation can be used for model-fitting as it represents the interpretation of a sub-space of the Fourier phase that is immune to the instrumental phase errors to the first order. == Applications == The technique was first used in the re-analysis of archival images from the Hubble Space Telescope where it enabled the discovery of a number of brown dwarf in close binary systems. The technique is used as an alternative to aperture masking interferometry, especially for fainter stars because it does not require the use of masks that typically block 90% of the light, and therefore allows higher throughput. It is also considered to be an alternative to coronagraphy for direct detection of exoplanets at very small separations (below 2 λ D {\displaystyle 2{\frac {\lambda }{D}}} ) where coronagraphs are limited by the wavefront errors of adaptive optics. The same framework can be used for wavefront sensing. In the case of an asymmetric aperture, a pseudo-inverse of A {\displaystyle A} can be used to reconstruct the wavefront errors directly from the image. A Python library called xara is available on GitHub and maintained by Frantz Martinache to facilitate the extraction and interpretation of kernel-phases. The KERNEL project, has received funding from the European Research Council to explore the potential of these observables for a number of use-cases, including direct detection of exoplanets, image reconstruction, and image plane wavefront sensing for adaptive optics.
Read more →
Camfecting

In computer security, camfecting is the process of attempting to hack into a person's webcam and activate it without the webcam owner's permission. The remotely activated webcam can be used to watch anything within the webcam's field of vision, sometimes including the webcam owner themselves. Camfecting is most often carried out by infecting the victim's computer with a virus that can provide the hacker access to their webcam. This attack is specifically targeted at the victim's webcam, and hence the name camfecting, a portmanteau of the words camera and infecting. Typically, a webcam hacker or a camfecter sends his victim an innocent-looking application which has a hidden Trojan software through which the camfecter can control the victim's webcam. The camfecter virus installs itself silently when the victim runs the original application. Once installed, the camfecter can turn on the webcam and capture pictures/videos. The camfecter software works just like the original webcam software present in the victim computer, the only difference being that the camfecter controls the software instead of the webcam's owner. == Notable cases == Marcus Thomas, former assistant director of the FBI's Operational Technology Division in Quantico, said in a 2013 story in The Washington Post that the FBI had been able to covertly activate a computer's camera—without triggering the light that lets users know it is recording—for several years. In November 2013, American teenager Jared James Abrahams pleaded guilty to hacking over 100-150 women and installing the highly invasive malware Blackshades on their computers in order to obtain nude images and videos of them. One of his victims was Miss Teen USA 2013 Cassidy Wolf. Researchers from Johns Hopkins University have shown how to covertly capture images from the iSight camera on MacBook and iMac models released before 2008, by reprogramming the microcontroller's firmware. == Prevention == A computer that does not have an up-to-date webcam software or any anti-virus (or firewall) software installed and operational may be at increased risk for camfecting from different types of malware. Softcams may nominally increase this risk, if not maintained or configured properly. Although a person cannot protect themselves from zero-day exploits that could potentially activate a camera unknowingly, such as Pegasus is able to do on smartphones. The only way to truly avoid being watched through your own camera is by blocking it physically, since software blocks can be overriden by advanced persistent threats. A simple piece of tape is more commonly used to offuscate the feed of the camera. With even Mark Zuckerberg doing so on his personal laptop that appeared during a presentation. And it being the way Snowden, an ex-contractor for the NSA, is portrayed to do so to prevent camfecting in the biopic Snowden. There is now a market for the manufacture and sale of sliding lens covers that allow users to physically block their computer's camera and, in some cases, microphone. A number of phone and laptop manufacturers tried to implement pop-up cameras that can only be opened manually by the user. But the trend did not become mainstream because of the engineering it took to keep the mechanisms up to date, aswell as the fragility and durability of the cameras.
Read more →
Security of the Java software platform

The Java software platform provides a number of features designed for improving the security of Java applications. This includes enforcing runtime constraints through the use of the Java Virtual Machine (JVM), a security manager that sandboxes untrusted code from the rest of the operating system, and a suite of security APIs that Java developers can utilise. Despite this, criticism has been directed at the programming language, and Oracle, due to an increase in malicious programs that revealed security vulnerabilities in the JVM, which were subsequently not properly addressed by Oracle in a timely manner. == Security features == === The JVM === The binary form of programs running on the Java platform is not native machine code but an intermediate bytecode. The JVM performs verification on this bytecode before running it to prevent the program from performing unsafe operations such as branching to incorrect locations, which may contain data rather than instructions. It also allows the JVM to enforce runtime constraints such as array bounds checking. This means that Java programs are significantly less likely to suffer from memory safety flaws such as buffer overflow than programs written in languages such as C which do not provide such memory safety guarantees. The platform does not allow programs to perform certain potentially unsafe operations such as pointer arithmetic or unchecked type casts. It manages memory allocation and initialization and provides automatic garbage collection which in many cases (but not all) relieves the developer from manual memory management. This contributes to type safety and memory safety. === Security manager === The platform provides a security manager which allows users to run untrusted bytecode in a "sandboxed" environment designed to protect them from malicious or poorly written software by preventing the untrusted code from accessing certain platform features and APIs. For example, untrusted code might be prevented from reading or writing files on the local filesystem, running arbitrary commands with the current user's privileges, accessing communication networks, accessing the internal private state of objects using reflection, or causing the JVM to exit. The security manager also allows Java programs to be cryptographically signed; users can choose to allow code with a valid digital signature from a trusted entity to run with full privileges in circumstances where it would otherwise be untrusted. Users can also set fine-grained access control policies for programs from different sources. For example, a user may decide that only system classes should be fully trusted, that code from certain trusted entities may be allowed to read certain specific files, and that all other code should be fully sandboxed. === Security APIs === The Java Class Library provides a number of APIs related to security, such as standard cryptographic algorithms, authentication, and secure communication protocols. === The sun.misc.Unsafe class === sun.misc.Unsafe is an internal utility class in the Java programming language which is a collection of low-level unsafe operations. While it is not a part of the official Java Class Library, it is called internally by the Java libraries. It resides in an unofficial Java module named jdk.unsupported. Beginning in Java 11, it has been partially migrated to jdk.internal.misc.Unsafe (which resides in module java.base). Its primary feature is to allow direct memory management (similar to C memory management) and memory address manipulation, manipulating objects and fields, thread manipulation, and concurrency primitives. Its declaration is: public final class Unsafe;, and it is a singleton class with a private constructor. It contains the following methods, many of which are declared native (invoking Java Native Interface): static Unsafe getUnsafe(): retrieves the Unsafe instance. It uses sun.reflect.Reflection to do so. int getInt(Object o, long offset): fetches a value (a field or array element) in the object at the given offset. (There are corresponding getBoolean(), getByte(), getShort(), getChar(), getLong(), getFloat(), and getDouble() methods as well.) void putInt(Object o, long offset, int x): stores a value into an object at the given offset. (There are corresponding putBoolean(), putByte(), putShort(), putChar(), putLong(), putFloat(), and putDouble() methods as well.) Object getObject(Object o, long offset): fetches a reference value from an object at the given offset. void putObject(Object o, long offset, Object x): stores a reference value into an object at the given offset. int getInt(long address): fetches a value at the given address. (There are corresponding getBoolean(), getByte(), getShort(), getChar(), getLong(), getFloat(), and getDouble() methods as well.) void putInt(long address, int x): stores a value into the given address. (There are corresponding putBoolean(), putByte(), putShort(), putChar(), putLong(), putFloat(), and putDouble() methods as well.) long getAddress(long address): fetches a native pointer from a given address. void putAddress(long address, long x): stores a native pointer into a given address. long allocateMemory(long bytes): allocates a block of native memory of the given size (similar to malloc()). long reallocateMemory(long address, long bytes): resizes a block of native memory to the given size (similar to realloc()). void setMemory(Object o, long offset, long bytes, byte value), void setMemory(long address, long bytes, byte value): sets all bytes in a block of memory to a fixed value (similar to memset()). void copyMemory(Object srcBase, long srcOffset, Object destBase, long destOffset, long bytes), void copyMemory(long srcAddress, long destAddress, long bytes): sets all bytes in a given block of memory to a copy of another block (similar to memcpy()). void freeMemory(long address): deallocates a block of native memory obtained from allocateMemory() or reallocateMemory(), similar to free()). long staticFieldOffset(Field f): obtains the location of a given field in the storage allocation of its class. long objectFieldOffset(Field f): obtains the location of a given static field in conjunction with staticFieldBase(). Object staticFieldBase(Field f): obtains the location of a given static field in conjunction with staticFieldOffset(). void ensureClassInitialized(Class c): ensures the given class has been initialized. int arrayBaseOffset(Class arrayClass): obtains the offset of the first element in the storage allocation of a given array class. int arrayIndexScale(Class arrayClass): obtains the scale factor for addressing elements in the storage allocation of a given array class. static int addressSize(): obtains the size (in bytes) of a native pointer. int pageSize(): obtains the size (in bytes) of a native memory page. Class defineClass(String name, byte[] b, int off, int len, ClassLoader loader, ProtectionDomain protectionDomain): signals to the JVM to define a class without security checks. Class defineAnonymousClass(Class hostClass, byte[] data, Object[] cpPatches): signals to the JVM to define a class but do not make it known to the class loader or system directory. Object allocateInstance(Class cls) throws InstantiationException: allocates an instance of a class without running its constructor. void monitorEnter(Object o): locks an object. void monitorExit(Object o): unlocks an object. boolean tryMonitorEnter(Object o): tries to lock an object, returning whether the lock succeeded. void throwException(Throwable ee): throws an exception without telling the verifier. final boolean compareAndSwapInt(Object o, long offset, int expected, int x): updates a variable to x if it is holding expected, returning whether the operation succeeded. (There are corresponding compareAndSwapLong() and compareAndSwapObject() methods as well.) int getIntVolatile(Object o, long offset): volatile version of getInt(). (There are corresponding getBooleanVolatile(), getByteVolatile(), getShortVolatile(), getCharVolatile(), getLongVolatile(), getFloatVolatile(), getDoubleVolatile(), and getObjectVolatile() methods as well.) void putIntVolatile(Object o, long offset, int x): volatile version of putInt(). (There are corresponding putBooleanVolatile(), putByteVolatile(), putShortVolatile(), putCharVolatile(), putLongVolatile(), putFloatVolatile(), putDoubleVolatile(), and putObjectVolatile() methods as well.) void putOrderedInt(Object o, long offset, int x): version of putIntVolatile() not guaranteeing immediate visibility of storage to other threads. (There are corresponding putOrderedLong() and putOrderedObject() methods as well.) void unpark(Object thread): unblocks a thread. void park(boolean isAbsolute, long time): blocks the current thread. int getLoadAverage(double[] loadavg, int nelems): gets the load average in the system run queue assigned to available processors averaged over various periods of time. void invokeCleaner(ByteBuffe
Read more →
Sanchar Saathi

Sanchar Saathi (lit. 'Communication Partner' or 'Communication Companion') is an Indian state-owned app and web portal, operated by the Department of Telecommunications, designed to assist Indian mobile users in tracking and blocking stolen or lost mobile devices. In late 2025, a government order requiring Sanchar Saathi to be pre-installed on all mobile devices sold nationwide, with explicit provisions on preventing users from deleting the app or disabling any of its broad functionalities, triggered widespread backlash. The order was subsequently withdrawn. == Background == The Telecommunications Act 2023 introduced an exceptionally broad definition of the term "telecommunications" and conferred wide-ranging powers on the government. Although the Department of Telecommunications (DoT) assured reporters that this definition would not be used to justify government overreach, a November 2024 amendment to the Telecom Cyber Security Rules expanded it further and introduced the concept of the Telecommunication Identifier User Entity (TIEU), enabling users to be personally identified through their phone numbers. Sanchar Saathi was launched amid a widespread rise in cybercrime and hacking, as part of the Indian government's effort to prevent stolen phones from being used for fraud and to promote a state-backed application. In an official statement, the DoT said, "India has big second-hand mobile device market. Cases have also been observed where stolen or blacklisted devices are being re-sold. It makes the purchaser abettor in crime and causes financial loss to them." == Launch == Sanchar Saathi was originally launched as a web portal in May 2023. It was later launched as a mobile app in January 2025. Describing itself as a "citizen-centric" safety tool, Sanchar Saathi allows users to check a device's IMEI, report and block lost or stolen phones, and flag suspected fraud communications. Under Sanchar Saathi's privacy policy, it can make and manage phone calls, view and send messages, read call logs, access photos and files, access the location and camera of the device in which the app is used, as well as read and write into the device's storage. According to official government data, by December 2025, the Sanchar Saathi app had helped recover more than 700,000 lost and stolen mobile devices across India. Users report around 2,000 fraud incidents through the app each day. == Pre-installation controversy == On 28 November 2025, the Bharatiya Janata Party government, led by prime minister Narendra Modi, privately ordered phone manufacturers, including Apple, Samsung, Xiaomi, Vivo, Oppo, among others, to pre-install the Sanchar Saathi app on new devices sold in the country, alongside mandating that old devices get issued a software update for the installation of the app. The order had a 90-day deadline and further included explicit provisions to ensure that the app is to be "readily visible and accessible to the end users at the time of first use or device setup" and that users should neither be able to delete the app nor disable or restrict any of its broad functionalities. The order caused widespread political backlash. K. C. Venugopal, a general secretary of the main opposition party, the Indian National Congress (or simply the Congress), called the order "beyond unconstitutional" and said, "A pre-loaded government app that cannot be uninstalled is a dystopian tool to monitor every Indian. It is a means to watch over every movement, interaction and decision of each citizen", adding, "Big Brother cannot watch us." Another Congress general secretary, Priyanka Gandhi, termed Sanchar Saathi a "snooping app", and attacked the government for "turning this country into a dictatorship". Uddhav Thackeray, former chief minister of Maharashtra, compared Sanchar Saathi to the Pegasus spyware. Sanjay Hegde, a senior advocate at the Supreme Court of India, said "Here in the garb of security, the intrusion is vast, unfettered, unguided and is totally disproportionate. The app ought to be struck down on that account". The Internet Freedom Foundation (IFF), an Indian digital rights advocacy organisation, said, "Forcing every smartphone to carry a permanent government app for a simple verification task is excessive and violates the Puttaswamy proportionality standard", referring to Puttaswamy v. Union of India, a 2017 landmark decision of the Supreme Court, which asserted that the right to privacy should be protected as a fundamental right. The IFF further said, "For this to work in practice, the app will almost certainly need system level or root level access, similar to carrier or OEM system apps, so that it cannot be disabled. That design choice erodes the protections that normally prevent one app from peering into the data of others, and turns Sanchar Saathi into a permanent, non-consensual point of access sitting inside the operating system of every Indian smartphone user." Moreover, the organisation said that while the app was being "framed as a benign IMEI checker", a server-side update could allow the app to engage in "client side scanning for 'banned' applications, flag VPN usage, correlate SIM activity, or trawl SMS logs in the name of fraud detection. Nothing in the order constrains these possibilities." In reaction to the controversy, Jyotiraditya Scindia, the union minister of communications, said, "There is no snooping or call monitoring", adding, "Obviously you can delete it. There is no problem. This is a matter of customer protection. It is not mandatory. If you don't want to register, and don't want to use the app, don't use it; don't register, and it will lay dormant." Scindia compared the app to other pre-installed mobile apps such as Google Maps, which he said could be deleted if users wished so. However, contrary to Scindia's statement, on many phone brands, such pre-installed apps cannot be deleted, although users can disable them. Furthermore, upon enquiry, Scindia did not clarify whether his remarks applied to the app after the order took effect, making no comment on the provision in the order that would prevent users from deleting the app. When Congress member Renuka Chowdhury submitted an adjournment motion notice in the Rajya Sabha seeking the suspension of all other matters to discuss the Sanchar Saathi issue, Kiren Rijiju, the union minister of parliamentary affairs, accused the opposition of "manufacturing issues" to stall session proceedings. By 2 December, it had been reported that Apple did not plan to comply with the order, citing privacy and security concerns for the iOS ecosystem and the fact that the order would violate its internal policy against the pre-installation of third-party software in iPhones. Although it was clarified that Apple did not intend to take the matter to court or publicly oppose the government, it was said that Apple "can't do this. Period." The order would have also required Google to create a custom version of Android solely for India which would include the Sanchar Saathi app, a requirement described to "not be acceptable to the company". Following the backlash, the order was revoked on 3 December 2025. In a press release, the government said, "Given Sanchar Saathi's increasing acceptance, Government has decided not to make the pre-installation mandatory for mobile manufacturers".
Read more →
Soterml

SoTerML (Soil and Terrain Markup Language) is a XML-based markup language for storing and exchanging soil and terrain related data. SoTerML development is being done within The e-SoTer Platform. GEOSS plans a global Earth Observation System and, within this framework, the e-SOTER project addresses the felt need for a global soil and terrain database. The Centre for Geospatial Science (Currently Nottingham Geospatial Institute) at the University of Nottingham has initiated the development since January 2009. Further development and maintenance is currently handled in National Soil Resources Institute (NSRI) at Cranfield University, UK. The role of CGS is within the development of the e-SOTER dissemination platform, which is based on INSPIRE principles. The SoTerML development included: 1. Development of a data dictionary for nomenclatures and various data sources (data and metadata). 2. Development of an exchange format/procedures from the World Reference Base 2006.
Read more →
Sample (graphics)

In computer graphics, a sample is an intersection of a channel and a pixel. The diagram below depicts a 24-bit pixel, consisting of 3 samples for Red, Green, and Blue. In this particular diagram, the Red sample occupies 9 bits, the Green sample occupies 7 bits and the Blue sample occupies 8 bits, totaling 24 bits per pixel. Note that the samples do not have to be equal size and not all samples are mandatory in a pixel. Also, a pixel can consist of more than 3 samples (e.g. 4 samples of the RGBA color space). A sample is related to a subpixel on a physical display.
Read more →
PeduliLindungi

SatuSehat (Indonesian for "one health"), formerly PeduliLindungi (roughly "care to protect"), is a national integrated health data exchange platform, jointly developed by the Indonesian Ministry of Communication and Information Technology (Kemenkominfo), in partnership with Committee for COVID-19 Response and National Economic Recovery (KPCPEN), Ministry of Health (Kemenkes), Ministry of State-Owned Enterprises (KemenBUMN), and Telkom Indonesia. The SatuSehat platform aims to facilitate data accessibility and service efficiency for health providers and the government, and assist the public as a tool to access their own electronic medical record data. This app was the official COVID-19 contact tracing app used for digital contact tracing in Indonesia, and originally known as TraceTogether but later changed because Singapore had its app using the same name. == Implementation == On 23 August 2021, Coordinating Minister for Maritime and Investments Affairs, Luhut Binsar Panjaitan, encouraged the government to make this app a mandatory requirement before using public transportations, such as train, bus, ferry, and plane. Furthermore, citizen must have installed the app before entering shopping malls, factories, and sport venues. Every person who have received at least a dose of vaccine will receive a vaccine card and vaccination certificate which can be downloaded from the app. In December 2022, with the revocation of PPKM (Community Activities Restrictions Enforcement) starting from 1 January 2023, Ministry of Health issued a statement that the usage of the app is not a governmental mandatory requirement as it used to be. === Transition into a citizen health app === On 7 September 2022, it was announced that the app would be modified to become a citizen health app, capitalising on the reach of the app and the existing work done around the app. On 28 February 2023, the authorities announced that the app was rebranded to SATUSEHAT Mobile (lit. 'OneHealth Mobile'), with existing users needing to update the PeduliLindungi app and re-synchronise their COVID-19 related health information. The re-branded app would eventually be an all-in-one health service and records retrieval app for Indonesians. == Controversy == It was reported that the app requires continuous access to the phone's files, media, and GPS, which quickly drains the battery. Allowing location access only during use or denying it altogether will render the app unusable. This stands in stark contrast to COVID-19 apps used in other countries that only utilize Bluetooth and do not require any additional permissions. In September 2021, stored personal data of at least 1.3 million Indonesian residents were leaked online, including the vaccine certificate of President Joko Widodo. The data leak was also reported on eHAC (electronic Health Alert Card), a mandatory app used for air passengers.
Read more →
Intel Threat Detection Technology

Intel Threat Detection Technology (TDT) is a CPU-level technology created by Intel in 2018 to enable host endpoint protections to use a CPU's low-level access to detect threats to a system. TDT consists of multiple components including Accelerated Memory Scanning, which uses the CPU's integrated GPU to scan memory, and Advanced Platform Telemetry, which uses processor-level activity monitoring to detect unusual activity. It is supported on sixth-generation or newer Intel Core CPUs and additional capabilities were added to the 11th generation Core processors. Intel TDT is integrated into several third-party anti-malware solutions including Microsoft Defender, Check Point Harmony Endpoint, CrowdStrike Falcon, and others. == Accelerated Memory Scanning == Accelerated Memory Scanning (also referred to as "Advanced Memory Scanning") uses the CPU's integrated GPU to scan memory for malicious code, instead of using the CPU directly. This improves system responsiveness during anti-malware scanning. and lowers power consumption. Features include pattern matching, using random forest decision trees, string extraction, entropy calculation, and Euclidean clustering. == Advanced Platform Telemetry == Advanced Platform Telemetry collects CPU-level telemetry to detect uncommon activity patterns which might be indicative of malware. The telemetry data is collected from the CPU performance monitoring unit (PMU) and doesn't require a large signature database to detect malware. Instead, it uses machine-learning based correlations to identify indicators of attack For example, Microsoft Defender is able to use TDT's Advanced Platform Telemetry features to detect processor usage patterns indicative of ransomware and cryptojacking with TDT so it can detect them.
Read more →
List of security assessment tools

This is a list of available software and hardware tools that are designed for or are particularly suited to various kinds of security assessment and security testing. == Operating systems and tool suites == Several operating systems and tool suites provide bundles of tools useful for various types of security assessment. === Operating system distributions === Kali Linux (formerly BackTrack), a penetration-test-focused Linux distribution based on Debian Pentoo, a penetration-test-focused Linux distribution based on Gentoo ParrotOS, a Linux distro focused on penetration testing, forensics, and online anonymity. == Tools ==
Read more →
Event store

An event store is a type of database optimized for storage of events. Conceptually, an event store records only the events affecting an entity, dossier, or policy, and the state of the entity at any point in its history can be reconstructed by replaying its contributing events in sequential order. Events (and their corresponding data) are the only "real" facts that should be stored in the database. All other objects can be derived from these events, meaning they are instantiated in memory by runtime code as needed (e.g. for showing in a user interface). In theory, any object that aggregates over recorded event data is not stored in the database. Instead these objects are built 'on the fly', by traversing the event history. When the aggregated object instance is no longer needed, it can simply be discarded (released from memory). == Example with insurance policies == For example, the event store concept of a database can be applied to insurance policies or pension dossiers. In these policies or dossiers the instantiation of each object that make up the dossier or policy (the person, partner(s), employments, etc.) can be derived and can be instantiated in memory based on the real world events. == Double timeline == A crucial part of an event store database is that each event has a double timeline: This enables event stores to correct errors of events that have been entered into the event store database before. The two dates are: Valid date is the date at which the event has become valid. Transaction date is the date at which the event is entered into the database. == Error correction == Another crucial part of an event store database is that events that are stored are not allowed to be changed. Once stored, also erroneous events are not changed anymore. The only way to change (or better: correct) these events is to instantiate a new event with the new values and using the double timeline. A correcting event would have the new values of the original event, with an event data of that corrected event, but a different transaction date. This mechanism ensures reproducibility at each moment in the time, even in the time period before the correction has taken place. It also allows to reproduce situations based on erroneous events (if required). == Advantages and disadvantages == One advantage of the event store concept is that handling the effects of back dated events (events that take effect before previous events and that may even invalidate them) is much easier. An event store will simplify the code in that rolling back erroneous situations and rolling up the new, correct situations is not needed anymore. Disadvantage may be that the code needs to re-instantiate all objects in memory based on the events each time a service call is received for a specific dossier or policy. == Compared to regular databases == In regular databases, handling backdated events to correct previous, erroneous events can be painful as it often results in rolling back all previous, erroneous transactions and objects and rolling up the new, correct transactions and objects. In an event store, only the new event (and its corresponding facts) are stored. The code will then redetermine the transactions and objects based on the new facts in memory.
Read more →
Lossless join decomposition

In database design, a lossless join decomposition is a decomposition of a relation r {\displaystyle r} into relations r 1 , r 2 {\displaystyle r_{1},r_{2}} such that a natural join of the two smaller relations yields back the original relation. This is central in removing redundancy safely from databases while preserving the original data. Lossless join can also be called non-additive. == Definition == A relation r {\displaystyle r} on schema R {\displaystyle R} decomposes losslessly onto schemas R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} if π R 1 ( r ) ⋈ π R 2 ( r ) = r {\displaystyle \pi _{R_{1}}(r)\bowtie \pi _{R_{2}}(r)=r} , that is r {\displaystyle r} is the natural join of its projections onto the smaller schemas. A pair ( R 1 , R 2 ) {\displaystyle (R_{1},R_{2})} is a lossless-join decomposition of R {\displaystyle R} or said to have a lossless join with respect to a set of functional dependencies F {\displaystyle F} if any relation r ( R ) {\displaystyle r(R)} that satisfies F {\displaystyle F} decomposes losslessly onto R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} . Decompositions into more than two schemas can be defined in the same way. == Criteria == A decomposition R = R 1 ∪ R 2 {\displaystyle R=R_{1}\cup R_{2}} has a lossless join with respect to F {\displaystyle F} if and only if the closure of R 1 ∩ R 2 {\displaystyle R_{1}\cap R_{2}} includes R 1 ∖ R 2 {\displaystyle R_{1}\setminus R_{2}} or R 2 ∖ R 1 {\displaystyle R_{2}\setminus R_{1}} . In other words, one of the following must hold: ( R 1 ∩ R 2 ) → ( R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{1}\setminus R_{2})\in F^{+}} ( R 1 ∩ R 2 ) → ( R 2 ∖ R 1 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{2}\setminus R_{1})\in F^{+}} === Criteria for multiple sub-schemas === Multiple sub-schemas R 1 , R 2 , . . . , R n {\displaystyle R_{1},R_{2},...,R_{n}} have a lossless join if there is some way in which we can repeatedly perform lossless joins until all the schemas have been joined into a single schema. Once we have a new sub-schema made from a lossless join, we are not allowed to use any of its isolated sub-schema to join with any of the other schemas. For example, if we can do a lossless join on a pair of schemas R i , R j {\displaystyle R_{i},R_{j}} to form a new schema R i , j {\displaystyle R_{i,j}} , we use this new schema (rather than R i {\displaystyle R_{i}} or R j {\displaystyle R_{j}} ) to form a lossless join with another schema R k {\displaystyle R_{k}} (which may already be joined (e.g., R k , l {\displaystyle R_{k,l}} )). == Example == Let R = { A , B , C , D } {\displaystyle R=\{A,B,C,D\}} be the relation schema, with attributes A, B, C and D. Let F = { A → B C } {\displaystyle F=\{A\rightarrow BC\}} be the set of functional dependencies. Decomposition into R 1 = { A , B , C } {\displaystyle R_{1}=\{A,B,C\}} and R 2 = { A , D } {\displaystyle R_{2}=\{A,D\}} is lossless under F because R 1 ∩ R 2 = A {\displaystyle R_{1}\cap R_{2}=A} and we have a functional dependency A → B C {\displaystyle A\rightarrow BC} . In other words, we have proven that ( R 1 ∩ R 2 → R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2}\rightarrow R_{1}\setminus R_{2})\in F^{+}} .
Read more →
Swap chain

In computer graphics, a swap chain (also swapchain) is a series of virtual framebuffers used by the graphics card and graphics API for frame rate stabilization, stutter reduction, and several other purposes. Because of these benefits, many graphics APIs require the use of a swap chain. The swap chain usually exists in graphics memory, but it can exist in system memory as well. A swap chain with two buffers is a kind of double buffer. == Function == In every swap chain there are at least two buffers. The first framebuffer, the screenbuffer, is the buffer that is rendered to the output of the video card. The remaining buffers are known as backbuffers. Each time a new frame is displayed, the first backbuffer in the swap chain takes the place of the screenbuffer, this is called presentation or swapping. A variety of other actions may be taken on the previous screenbuffer and other backbuffers (if they exist). The screenbuffer may be simply overwritten or returned to the back of the swap chain for further processing. The action taken is decided by the client application and is API dependent. == Direct3D == Microsoft Direct3D implements a SwapChain class. Each host device has at least one swap chain assigned to it, and others may be created by the client application. The API provides three methods of swapping: copy, discard, and flip. When the SwapChain is set to flip, the screenbuffer is copied onto the last backbuffer, then all the existing backbuffers are copied forward in the chain. When copy is set, each backbuffer is copied forward, but the screenbuffer is not wrapped to the last buffer, leaving it unchanged. Flip does not work when there is only one backbuffer, as the screenbuffer is copied over the only backbuffer before it can be presented. In discard mode, the driver selects the best method. == Comparison with triple buffering == Outside the context of Direct3D, triple buffering refers to the technique of allowing an application to draw to whichever back buffer was least recently updated. This allows the application to always proceed with rendering, regardless of the pace at which frames are being drawn by the application or the pace at which frames are being sent to the display. Triple buffering may result in a frame being discarded without being displayed if two or more newer frames are completely rendered in the time it takes for one frame to be sent to the display. By contrast, Direct3D swap chains are a strict first-in, first-out queue, so every frame that is drawn by the application will be displayed even if newer frames are available. Direct3D does not implement a most-recent buffer swapping strategy, and Microsoft's documentation calls a Direct3D swap chain of three buffers "triple buffering". Triple buffering as described above is superior for interactive purposes such as gaming, but Direct3D swap chains of more than three buffers can be better for tasks such as presenting frames of a video where the time taken to decode each frame may be highly variable.
Read more →
Tribute (website)

Tribute is an American video-sharing website headquartered in Brooklyn. Created in 2014 by Andrew Horn and Rory Petty, the platform lets customers create video montages (called "tributes") for occasions including weddings, birthdays, anniversaries, get well soon, and memorials. Tribute.co allows users to record video messages, request submissions from friends and family, insert photos, add music, and send the resulting video tribute montage to a recipient. == Overview == Tribute's collaborative technology starts with inviting people to contribute via email, SMS or social media. Participants receive a prompt to record a short video via their phone, computer or tablet. The site's video editing software allows users to drag and drop the clips in their desired order without prior video editing experience. == History == When Andrew Horn turned twenty-seven, his girlfriend, Miki Agrawal surprised him with a video montage containing clips of his family and closest friends explaining why they loved him. This resulted in Andrew's idea to create Tribute–a "living eulogy" video-compilation service that he co-founded with software engineer Rory Petty. Founded in 2014, Tribute's activity accelerated in 2020 due to the COVID-19 pandemic, and it had sent over 5 million videos as of December 2021. While social distance restrictions were in effect, the site provided a way for people to connect while in-person celebrations were put on hold. For each video sold, Tribute makes one available to hospitals for free and has partnered with Cleveland Clinic Cancer Center in Ohio, Lurie Children's Hospital in Illinois and CarePoint Health in New Jersey.
Read more →
Jeremy Renner Official

Jeremy Renner Official (or Jeremy Renner on the Google Play Store) was a mobile app created by American actor Jeremy Renner. He created the app in March 2017 to hear the input and comments of his fans. The app was shut down in September 2019 in part due to the frequent bullying and trolling that the platform had experienced. The app featured optional microtransactions, with some ranging up to roughly US$400 despite the app itself being free. Upon shutting down the app, Renner issued a mass-refund for the collectible "stars" in the app for purchases made within the last ninety days, from the day the announcement was posted. He then posted an apology to the app itself, and the app was deleted from both the Google Play Store and the App Store shortly after. == Usage == Upon downloading the app, the user was faced with a video of Renner speaking about his fans and superfans, regular giveaways, and real-life updates. While the app was active, Renner posted regular questions and comments for fans. Renner occasionally livestreamed about his work and day-to-day life. The community developed to include memes, selfies, and a "Happy Rennsday" event on Wednesdays. == History == === 2017–2019 === The app launched in March 2017 with a promotional contest. Renner's fans were encouraged to download the app and create comments about being Renner's biggest fan; Renner would then choose a winner and transport the winner and a guest to have lunch with him at the Calgary Expo. In the first few months Renner teased behind-the-scenes of projects he was working on, which he now sporadically does on Instagram. The app was similarly designed to Instagram as well, with a near identically styled layout. Around midway through 2019, a hoax account of Renner was made to mock the celebrity, joking about masturbating to porn and defending another hoax account of Casey Anthony. FastCompany wrote extensively about Renner's app in April 2019, calling it "a surprising new kind of social media". The Ringer stated "Jeremy Renner's Jeremy Renner app is the Jeremy Renner of apps." === After deletion (2019–2020) === After the shutdown of the app, a comedy-based pseudo-app with modular endings was released, called "The Jeremy Renner App Experience", in which the player plays as Jeremy Renner on the day of the Jeremy Renner Official app's shutdown. The app details several different choices on how Renner handles the situation. A six-part podcast was also created to mock the app's deletion, called The Renner Files, featuring Carolyn Goldfarb and Sarah Ramos. == Controversies == === Marketing === One of the main controversies of Renner's app was its marketing. The app's developers, Escapex, specialized in and grew famous for making similar monetized apps for celebrities. The marketing campaign was based on direct contact with Renner, whose chances were increased with regular payments for "stars", although very few encounters seemed to happen with Renner himself. The multiple problems with the app led the CEO of Escapex, Sephi Shapira, to call the app a "freak situation", and added "Am I concerned about this? Not more than I'm concerned about 50 other things I'm dealing with as a startup company." Along with the marketing failures, the app was seen as misrepresenting itself as seemingly erotic with some advertisements featuring Renner suggestively staring at the camera, despite the actual app being initially considered safe for children. === Harassment === After its release in 2017, the app was met with waves of harassment and bullying by many users on the app, most frequently by using impersonation — referenced in Renner's apology/deletion notice. Some death threats were made across the app by fraud accounts pretending to be several controversial celebrities, including O. J. Simpson and Casey Anthony. As early as October 2017, there were claims of censorship, bullying, and "contest-rigging". In September 2019, comedian Stefan Heck publicized his discovery of the fact that replies through the app appeared as if they were sent by Renner himself in push notifications. After several users abused this feature, Renner asked Escapex to shut down the app.
Read more →
Spyglass (app)

Spyglass is a navigation and orientation mobile application developed by Pavel Ahafonau. It combines data from a digital compass, GNSS positioning, motion sensors, maps, and the device camera to provide direction finding, waypoint navigation, and measurement tools. The application is designed for offline and off-road use and is used in outdoor navigation, orientation tasks, astronomy, and fieldwork. == History == Spyglass was created by independent software developer Pavel Ahafonau as a personal project in 2009, following the introduction of a digital compass sensor in the iPhone. It initially focused on combining compass, GPS, and camera data into an augmented-reality tool for navigation and orientation. In September 2009, a public prototype was demonstrated, showing a live camera view combined with a digital compass overlay aligned to device orientation, presenting an early augmented-reality, location-aware heads-up display. The application was released on the Apple App Store in October 2009. In February 2010, a major update introduced target-based navigation, allowing users to navigate to saved locations, bearings, and selected celestial objects. The update also added visual measurement tools, including an optical-style rangefinder, as well as a vertical speed indicator displaying ascent and descent rates derived from device sensor data. In December 2010, Spyglass was featured by Apple in iTunes Rewind 2010 under augmented-reality applications. The application expanded to Android on 28 October 2017. In May 2021, Spyglass expanded its offline mapping capabilities by adding support for additional map styles by Thunderforest, extending the range of available cartographic themes for offline use. Also in 2021, navigation satellite tracking was introduced, allowing visualization and tracking of major GPS/GNSS satellite constellations. In 2022, a searchable offline database of major locations was added, including airports, seaports, mountains, castles, and landmarks, along with nearest-airport tracking functionality. In July 2024, previously separate iOS editions (Spyglass, Commander Compass, and Commander Compass Go) were consolidated into a single Spyglass application. At the same time, the app transitioned to a freemium model. == Features == Spyglass provides navigation and orientation functions by combining sensor data from the device. Core functionality includes a digital compass, GNSS-based positioning, waypoint creation and tracking, and map-based navigation with offline support. The application includes an augmented-reality viewfinder mode that overlays navigation and sensor information onto the live camera view. Displayed data may include heading, bearing, distance to targets, pitch, roll, yaw, altitude, speed, and estimated time of arrival. Additional tools include an altimeter, speedometer, vertical speed indicator, inclinometer, artificial horizon, coordinate conversion utilities, optical rangefinding, and angular measurement tools. Spyglass also supports celestial navigation features, such as tracking of the Sun, Moon, stars, and global navigation satellite systems. Spyglass uses data from the device's GNSS receiver, digital compass, gyroscope, accelerometer, barometer (when available), and camera. Sensor data are combined to calculate position, orientation, movement, and measurement overlays. The application is designed to function without an internet connection. Navigation tools, sensor readings, waypoint tracking, augmented-reality features, celestial tracking, and the built-in location database operate offline. Internet access is required only for loading online map tiles; previously downloaded offline maps remain available without connectivity.
Read more →