AI Code Model Ranking

AI Code Model Ranking — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

C-RAN

C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G, 5G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network". == Background == Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells. There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times. == Evolution of base station architecture == === All-in-one macro base station === In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments. === Distributed base station === For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture. === C-RAN/Cloud-RAN === C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments. == Architecture overview == C-RAN architecture has the following characteristics that are distinct from other cellular architectures: Large scale centralized deployment: Allows many RRHs to connect to a centralized BBU pool. The maximum distance can be 20km in fiber link for 4G (LTE/LTE-A) systems, and even longer distances (40~80km) for 3G (WCDMA/TD-SCDMA) and 2G (GSM/CDMA) systems. Native support to Collaborative Radio technologies: Any BBU can talk with any other BBU within the BBU pool with very high bandwidth (10 Gbit/s and above) and low latency (10 μs level). This is enabled by the interconnection of BBUs in the pool. This is one major difference from BBU Hotelling, or base station Hotelling; in the latter case, the BBUs of different base stations are simply stacked together and have no direct link between them to allow physical layer co-ordination. Real-time virtualization capability based on open platform: This is different from traditional base stations built on proprietary hardware, where the software and hardware are close-sourced and provided by single vendors. In contrast, a C-RAN BBU pool is built on open hardware, like x86/ARM CPU based servers, and interface cards that handle fiber links to RRHs and inter-connections in the pool. Real-time virtualization ensures that resources in the pool can be allocated dynamically to base station software stacks, say 4G/3G/2G function modules from different vendors, according to network load. However, to satisfy the strict timing requirements of wireless communication systems, the real-time performance for C-RAN is at the level of tens of microseconds, which is two orders of magnitude better than the millisecond level 'real-time' performance usually seen in Cloud Computing environments. == Similar architecture and systems == KT, a telecom operator in the Republic of Korea, introduced a Cloud Computing Center (CCC) system in their 3G (WCDMA/HSPA) and 4G (LTE/LTE-A) network in 2011 and 2012. The concept of CCC is basically the same as C-RAN. SK Telecom has also deployed Smart Cloud Access Network (SCAN) and Advanced-SCAN in their 4G (LTE/LTE-A) network in Korea no later than 2012. In 2014, Airvana (now CommScope) introduced OneCell, a C-RAN-based small cell system designed for enterprises and public spaces. == Competing architectures in cellular network evolution == === All-in-one BTS === One major alternative solution that is addressing similar challenges of RAN, is the small size, all-in-one outdoor BTS. Thanks to the achievements in the semiconductor industry, all the functionality of a BTS, including RF, baseband processing, MAC processing and package level processing, can now be implemented in a volume of <50 liters. This makes the system small and weatherproof, reduces the difficulty of BTS site choice and construction, eliminates the air conditioning requirement, and thus reduces operational costs. However, because each BTS is still working on its own, it cannot readily make use of the collaboration algorithms to reduce the interference between neighboring BTSs. It is also relatively hard to upgrade or repair because the all-in-one BTS units are usually mounted near the antenna. More processing units in less-protected environments also implies a higher failure rate compared to C-RAN, which only has the RRU deployed outdoors. The advantage of Cloud RAN lies in its ability to implement LTE-Advanced features such as Coordinated MultiPoint (CoMP) with very low latency between multiple radio heads. However, the economic benefit of improvements such as CoMP can be negated by the higher backhaul costs for some operators. === Small cell === The main competition between small cell and C-RAN occurs in two deployment scenarios: outdoor hotspot coverage and indoor coverage. == Academic research and publications == As one of the promising evolution paths for future cellular network architecture, C-RAN has attracted high academic research interest. Meanwhile, because the native support of cooperative radio capability built into the C-RAN architecture, it also enables many advanced algorithms that were hard to implement in cellular networks, including Cooperative Multi-Point Transmission/Receiving, Network Coding, etc. In October 2011, Wireless World Research Forum 27 was hosted in Germany, when China Mobile was invited to give a C-RAN presentation. In August 2012, IEEE C-RAN 2012 workshop was hosted in Kunming, China. CRC Press published a book, "Green Communications: Theore
Read more →
Taskworld

Taskworld is a cloud-based collaboration platform created by Fred Mouawad. The SaaS (software as a service) is designed to facilitate project and task management, collaboration, delegation, communication, knowledge management, measure progress and provide performance metrics for evidence-based evaluations within teams. It allows team members to assign and receive tasks, add followers, record comments, share and store unlimited files and organize projects. == Background == An initial version of Taskworld was custom-built by the IT team working for Mouawad in 2006. This was done as a way to try and overcome internal issues regarding delegation, accountability and time-management. The application was constructed to prevent tasks from falling through the cracks and make it easy to follow up on-going projects where many individuals throughout various departments of the organization were involved. Mouawad’s Synergia One group of companies later implemented the application internally as the ‘Task Management System’ and found a general improvement in execution across international offices and departments. This successful implementation led Mouawad to found the ‘My Taskworld’ website which later evolved into ‘Taskworld.' The company was officially founded in February 2012, and in June later that year, Mouawad presented a prototype of the Taskworld website to an Executive Program at the Stanford Graduate School of Business. == Reception == The launch of the app was covered by the media as an addition to the Synergia One group of companies founded by CEO Fred Mouawad. The mobile app is currently available on both android and iOS platforms. Google Play gives the app 3.8 out of 5 stars while the Apple App Store gave it 2.9 out of 5 stars. Alex Williams in a 2014 article for Tech Crunch said, “Taskworld’s technology plays to human emotions. As the feedback is continuous, people are compelled to engage with the service. But in some respects, Taskworld is fairly simple and still needing more to make it a potent competitor in the market.” == Features == Taskworld's main features include, but are not limited to: Project &Task Management - Taskworld includes up to five levels of hierarchy including Project Group, Project, Tasklist, Task and Checklist. Some features in this group are assigning tasks, setting due dates, adding followers, task comments, set repeating tasks, tasks in multiple locations, project templates, copy project, archiving, smart notifications, drag and drop Kanban boards, image preview boards, file management, people page and personnel directory, customizable tags and colored labels. Enterprise Messaging - The app includes a native chat application with channels and groups, private and direct messaging capabilities. Other communication features inside of the app include project chat, drag and drop file attachments, an email bridge to send and receive messages and @mentions. Overview & Analytics - Taskworld includes several features under this section including a dashboard, workspace snapshot, workspace filter, interactive calendar, project analytics and health status, project burndown chart, project burn-up chart and interactive timeline. == Languages and customers == Taskworld is used by 4,000 companies in 80 countries. The app is currently available in eight languages: English, French, German, Spanish, Mandarin, Portuguese, Thai and Korean. == Customer support == The Taskworld User Guide offers details on how to use features of the application. Customer support is offered inside of the application for questions and feedback regarding the software, and also via email. The Taskworld customer support team has received a 98% Customer Satisfaction Rating, according to customer ratings on its support platform Zendesk. Free, live demos are also offered for those companies who need assistance.
Read more →
Open Data Center Alliance

opendatacenteralliance.org appears to have been closed down. The Open Data Center Alliance is an independent organization created in Oct. 2010 with the assistance of Intel to coordinate the development of standards for cloud computing. Approximately 100 companies, which account for more than $50bn of IT spending, have joined the Alliance, including BMW, Royal Dutch Shell and Marriott Hotels. "The Alliance's Cloud 2015 vision is aimed at creating a federated cloud where common standards will be laid down for those in the hardware and software arena." == Usage Model Roadmap == The organization sees a growing need for solutions developed in an open, industry-standard and multivendor fashion, and has thus created a usage model roadmap featuring 19 prioritized usage models. The usage models provide detailed requirements for data center and cloud solutions, and will include detailed technical documentation discussing the requirements for technology deployments. To further its roadmap development, the steering committee established five initial technical workgroups in the areas of infrastructure, management, regulation & ecosystem, security and services. The organization delivered a 0.50 usage model roadmap to Open Data Center Alliance technical workgroups in Oct. 2010, and delivered a full 1.0 roadmap for public use in June 2011. == Membership == The steering committee consists of BMW, Capgemini, China Life, China Unicom Group, Deutsche Bank, JPMorgan Chase, Lockheed Martin, Marriott International, Inc., National Australia Bank, Royal Dutch Shell, Terremark and UBS. Other members include AT&T, CERN, eBay, Logica, Motorola Mobility Inc. and Nokia. "The demands on the IT organisations are coming at such an alarming rate that there are many, many different solutions being developed today that maybe don't work with each other. We need one voice, one road map, so that companies are able to say to manufacturers here is a clear vision of what they should be developing their product to do." says Marvin Wheeler, of Terremark, chairman of the Alliance. "While it's unclear how successful this alliance will be, it is at least shedding the spotlight on cloud interoperability, a big emerging issue," said Larry Dignan of ZDNet.
Read more →
Brownout (software engineering)

Brownout in software engineering is a technique that involves disabling certain features of an application. == Description == Brownout is used to increase the robustness of an application to computing capacity shortage. If too many users are simultaneously accessing an application hosted online, the underlying computing infrastructure may become overloaded, rendering the application unresponsive. Users are likely to abandon the application and switch to competing alternatives, hence incurring long-term revenue loss. To better deal with such a situation, the application can be given brownout capabilities: The application will disable certain features – e.g., an online shop will no longer display recommendations of related products – to avoid overload. Although reducing features generally has a negative impact on the short-term revenue of the application owner, long-term revenue loss can be avoided. The technique is inspired by brownouts in power grids, which consists in reducing the power grid's voltage in case electricity demand exceeds production. Some consumers, such as incandescent light bulbs, will dim – hence originating the term – and draw less power, thus helping match demand with production. Similarly, a brownout application helps match its computing capacity requirements to what is available on the target infrastructure. Brownout complements elasticity. The former can help the application withstand short-term capacity shortage, but does so without changing the capacity available to the application. In contrast, elasticity consists of adding (or removing) capacity to the application, preferably in advance, so as to avoid capacity shortage altogether. The two techniques can be combined; e.g., brownout is triggered when the number of users increases unexpectedly until elasticity can be triggered, the latter usually requiring minutes to show an effect. Brownout is relatively non-intrusive for the developer, for example, it can be implemented as an advice in aspect-oriented programming. However, surrounding components, such as load-balancers, need to be made brownout-aware to distinguish between cases where an application is running normally and cases where the application maintains a low response time by triggering brownout. == Usage in phased deprecation == A related use of the brownout concept in software engineering is the deliberate introduction of temporary outages to a system, API or feature that is being phased out. This is sometimes also called a "scream test" when it is used to discover unknown dependents of a system or API. The intention is to allow detection of downstream consumers of an API or service who may otherwise have missed deprecation announcements or to uncover hidden side-effects of the deprecation that may have been overlooked. The intention is that developers of dependent systems will notice their own system failures caused by the upstream brownout. Such brownouts are typically pre-announced scheduled outages or probabilistic in nature (such as artificially failing a percentage of requests). As a brownout is only a temporary or partial outage, it provides downstream consumers of an API or service time to remove any discovered dependencies on the deprecated API before it is fully retired. For consumers that have already prepared for the deprecation, a brownout provides valuable testing that the final removal of the service won't cause any unexpected problems.
Read more →
Data preprocessing

Data preprocessing can refer to manipulation, filtration or augmentation of data before it is analyzed, and is often an important step in the data mining process. Data collection methods are often loosely controlled, resulting in out-of-range values, impossible data combinations, and missing values, amongst other issues. Preprocessing is the process by which unstructured data is transformed into intelligible representations suitable for machine-learning models. This phase of model deals with noise in order to arrive at better and improved results from the original data set which was noisy. This dataset also has some level of missing value present in it. The preprocessing pipeline used can often have large effects on the conclusions drawn from the downstream analysis. Thus, representation and quality of data is necessary before running any analysis. If there is a high proportion of irrelevant and redundant information present or noisy and unreliable data, then knowledge discovery during the training phase may be more difficult. Data preparation and filtering steps can take a considerable amount of processing time. Examples of methods used in data preprocessing include cleaning, instance selection, normalization, one-hot encoding, data transformation, feature extraction and feature selection. == Applications == === Data mining === Data preprocessing allows for the removal of unwanted data with the use of data cleaning, this allows the user to have a dataset to contain more valuable information after the preprocessing stage for data manipulation later in the data mining process. Editing such dataset to either correct data corruption or human error is a crucial step to get accurate quantifiers like true positives, true negatives, false positives and false negatives found in a confusion matrix that are commonly used for a medical diagnosis. Users are able to join data files together and use preprocessing to filter any unnecessary noise from the data which can allow for higher accuracy. Users use Python programming scripts accompanied by the pandas library which gives them the ability to import data from a comma-separated values as a data-frame. The data-frame is then used to manipulate data that can be challenging otherwise to do in Excel. Pandas (software) which is a powerful tool that allows for data analysis and manipulation; which makes data visualizations, statistical operations and much more, a lot easier. Many also use the R programming language to do such tasks as well. The reason why a user transforms existing files into a new one is because of many reasons. Aspects of data preprocessing may include imputing missing values, aggregating numerical quantities and transforming continuous data into categories (data binning). More advanced techniques like principal component analysis and feature selection are working with statistical formulas and are applied to complex datasets which are recorded by GPS trackers and motion capture devices. === Semantic data preprocessing === Semantic data mining is a subset of data mining that specifically seeks to incorporate domain knowledge, such as formal semantics, into the data mining process. Domain knowledge is the knowledge of the environment the data was processed in. Domain knowledge can have a positive influence on many aspects of data mining, such as filtering out redundant or inconsistent data during the preprocessing phase. Domain knowledge also works as constraint. It does this by using working as set of prior knowledge to reduce the space required for searching and acting as a guide to the data. Simply put, semantic preprocessing seeks to filter data using the original environment of said data more correctly and efficiently. There are increasingly complex problems which are asking to be solved by more elaborate techniques to better analyze existing information. Instead of creating a simple script for aggregating different numerical values into a single value, it make sense to focus on semantic based data preprocessing. The idea is to build a dedicated ontology, which explains on a higher level what the problem is about. In regards to semantic data mining and semantic pre-processing, ontologies are a way to conceptualize and formally define semantic knowledge and data. The Protégé (software) is the standard tool for constructing an ontology. In general, the use of ontologies bridges the gaps between data, applications, algorithms, and results that occur from semantic mismatches. As a result, semantic data mining combined with ontology has many applications where semantic ambiguity can impact the usefulness and efficiency of data systems. Applications include the medical field, language processing, banking, and even tutoring, among many more. There are various strengths to using a semantic data mining and ontological based approach. As previously mentioned, these tools can help during the per-processing phase by filtering out non-desirable data from the data set. Additionally, well-structured formal semantics integrated into well designed ontologies can return powerful data that can be easily read and processed by machines. A specifically useful example of this exists in the medical use of semantic data processing. As an example, a patient is having a medical emergency and is being rushed to hospital. The emergency responders are trying to figure out the best medicine to administer to help the patient. Under normal data processing, scouring all the patient’s medical data to ensure they are getting the best treatment could take too long and risk the patients’ health or even life. However, using semantically processed ontologies, the first responders could save the patient’s life. Tools like a semantic reasoner can use ontology to infer the what best medicine to administer to the patient is based on their medical history, such as if they have a certain cancer or other conditions, simply by examining the natural language used in the patient's medical records. This would allow the first responders to quickly and efficiently search for medicine without having worry about the patient’s medical history themselves, as the semantic reasoner would already have analyzed this data and found solutions. In general, this illustrates the incredible strength of using semantic data mining and ontologies. They allow for quicker and more efficient data extraction on the user side, as the user has fewer variables to account for, since the semantically pre-processed data and ontology built for the data have already accounted for many of these variables. However, there are some drawbacks to this approach. Namely, it requires a high amount of computational power and complexity, even with relatively small data sets. This could result in higher costs and increased difficulties in building and maintaining semantic data processing systems. This can be mitigated somewhat if the data set is already well organized and formatted, but even then, the complexity is still higher when compared to standard data processing. Below is a simple a diagram combining some of the processes, in particular semantic data mining and their use in ontology. The diagram depicts a data set being broken up into two parts: the characteristics of its domain, or domain knowledge, and then the actual acquired data. The domain characteristics are then processed to become user understood domain knowledge that can be applied to the data. Meanwhile, the data set is processed and stored so that the domain knowledge can applied to it, so that the process may continue. This application forms the ontology. From there, the ontology can be used to analyze data and process results. Fuzzy preprocessing is another, more advanced technique for solving complex problems. Fuzzy preprocessing and fuzzy data mining make use of fuzzy sets. These data sets are composed of two elements: a set and a membership function for the set which comprises 0 and 1. Fuzzy preprocessing uses this fuzzy data set to ground numerical values with linguistic information. Raw data is then transformed into natural language. Ultimately, fuzzy data mining's goal is to help deal with inexact information, such as an incomplete database. Currently fuzzy preprocessing, as well as other fuzzy based data mining techniques see frequent use with neural networks and artificial intelligence.
Read more →
Diagnostically acceptable irreversible compression

Diagnostically acceptable irreversible compression (DAIC) is the amount of lossy compression which can be used on a medical image to produce a result that does not prevent the reader from using the image to make a medical diagnosis. The term was first introduced at a workshop on irreversible compression convened by the European Society of Radiology (ESR) in Palma de Mallorca October 13, 2010, the results of which were reported in a subsequent position paper. == Determination == The "amount of compression" in irreversible compression used to be determined by the compression ratio, where the acceptable minimum is determined by the algorithm (typically JPEG or J2K) and the data type (body part and imaging method). Such a definition is easy to follow, and has been used by medical bodies in 2010 around the world. However, its downside is obvious: the compression ratio tells nothing about the real quality of the image, as different compressors can produce vastly different qualities under the same file size. For example, the JPEG format of 1992 can perform as well as many modern formats given newer techniques exploited in mozjpeg and ISO libjpeg, yet they would be lumped together with the legacy encoders in such a scheme. The image compression community has long used objective quality metrics like SSIM to measure the effects of compression. In the absence of good data regarding SSIM, the ESR review of 2010 concluded that it is still difficult to establish a criterion for whether a particular irreversible compression scheme applied with particular parameters to a particular individual image, or category of images, avoids the introduction of some quantifiable risk of a diagnostic error for any particular diagnostic task. A 2017 study showed that a SSIM variant called 4-G-r (4-component, gradient, structural component of SSIM) best reflects changes in images that affect the decision of radiologists out of 16 SSIM variants. A 2020 study shows that visual information fidelity (VIF), feature similarity index (FSIM), and noise quality metric (NQM) best reflect radiologist preferences out of ten metrics. It also mentions that the original version of SSIM works as poorly as a basic root-mean-square distance (RMSD) for this purpose, a result echoed by the 2017 study. The 4-G-r modification is not tested in the study.
Read more →
Managed private cloud

Managed private cloud (also known as "hosted private cloud" or "single-tenant SaaS") refers to a principle in software architecture where a single instance of the software runs on a server, serves a single client organization (tenant), and is managed by a third party. The third-party provider is responsible for providing the hardware for the server and also for preliminary maintenance. This is in contrast to multitenancy, where multiple client organizations share a single server, or an on-premises deployment, where the client organization hosts its software instance. Managed private clouds also fall under the larger umbrella of cloud computing. == Adoption == The need for private clouds arose due to enterprises requiring a dedicated service and infrastructure for their cloud computing needs, such as for business-critical operations, improved security, and better control over their resources. Managed private cloud adoption is a popular choice among organizations. It has been on the rise due to enterprises requiring a dedicated cloud environment and preferring to avoid having to deal with management, maintenance, or future upgrade costs for the associated infrastructure and services. Such operational costs are unavoidable in on-premises private cloud data centers. == Advantages and challenges of managed private cloud == A managed private cloud cuts down on upkeep costs by outsourcing infrastructure management and maintenance to the managed cloud provider. It is easier to integrate an organization's existing software, services, and applications into a dedicated cloud hosting infrastructure which can be customized to the client's needs instead of a public cloud platform, whose hardware or infrastructure/software platform cannot be individualized to each client. Customers who choose a managed private cloud deployment usually choose them because of their desire for efficient cloud deployment, but also have the need for service customization or integration only available in a single-tenant environment. This chart shows the key benefits of the different types of deployments, and shows the overlap between these cloud solutions. This chart shows key drawbacks. Since deployments are done in a single-tenant environment, it is usually cost-prohibitive for small and medium-sized businesses. While server upkeep and maintenance are handled by the service provider, including network management and security, the client is charged for all such services. It is up to the potential client to determine if a managed private cloud solution aligns with their business objectives and budget. While the service provider maintains the upkeep of servers, network, and platform infrastructure, sensitive data is typically not stored on managed private clouds as it may leave business-critical information prone to breaches via third-party attacks on the cloud service provider. Common customizations and integrations include: Active Directory Single Sign-on Learning Management Systems Video Teleconferencing == Deployment strategies and service providers == Software companies have taken a variety of strategies in the Managed Private Cloud realm. Some software organizations have provided managed private cloud options internally, such as Microsoft. Companies that offer an on-premises deployment option, by definition, enable third-party companies to market Managed Private Cloud solutions. A few managed private cloud service providers are: Adobe Connect: Adobe Connect may be purchased for on-premises deployment, multi-tenant hosted deployment, managed private cloud as ACMS, or managed by third-party managed private cloud provider ConnectSolutions. Rackspace CenturyLink Microsoft licenses for Lync, SharePoint and Exchange may be purchased for on-premises deployment, a multi-tenant hosted deployment via Office 365, or managed by third-party cloud hosting from Azaleos, ConnectSolutions and others.
Read more →
Cloud-based integration

Cloud-based integration is a form of systems integration business delivered as a cloud computing service that addresses data, process, service-oriented architecture (SOA) and application integration. == Description == Integration platform as a service (iPaaS) is a suite of cloud services enabling customers to develop, execute and govern integration flows between disparate applications. Under the cloud-based iPaaS integration model, customers drive the development and deployment of integrations without installing or managing any hardware or middleware. The iPaaS model allows businesses to achieve integration without big investment into skills or licensed middleware software. iPaaS used to be regarded primarily as an integration tool for cloud-based software applications, used mainly by small to mid-sized business. Over time, a hybrid type of iPaaS—hybrid-IT iPaaS—that connects cloud to on-premises, is becoming increasingly popular. Additionally, large enterprises are exploring new ways of integrating iPaaS into their existing IT infrastructures. Cloud integration was created to break down the data silos, improve connectivity and optimize the business process. Cloud integration has increased in popularity as the usage of Software as a Service solutions has grown. Prior to the emergence of cloud computing in the early 2000s, integration could be categorized as either internal or business to business (B2B). Internal integration requirements were serviced through an on-premises middleware platform and typically utilized a service bus to manage exchange of data between systems. B2B integration was serviced through EDI gateways or value-added network (VAN). The advent of SaaS applications created a new kind of demand which was met through cloud-based integration. Since their emergence, many such services have also developed the capability to integrate legacy or on-premises applications, as well as function as EDI gateways. The following essential features were proposed by one marketing company: Deployed on a multi-tenant, elastic cloud infrastructure Subscription model pricing (operating expense, not capital expenditure) No software development (required connectors should already be available) Users do not perform deployment or manage the platform itself Presence of integration management and monitoring features The emergence of this sector led to new cloud-based business process management tools that do not need to build integration layers - since those are now a separate service. Drivers of growth include the need to integrate mobile app capabilities with proliferating API publishing resources and the growth in demand for the Internet of things functionalities as more 'things' connect to the Internet.
Read more →
Misskey

Misskey (Japanese: ミスキー, romanized: Misukī) is an open source, federated, social networking service created in 2014 by Japanese software engineer Eiji "syuilo" Shinoda. Misskey uses the ActivityPub protocol for federation, allowing users to interact between independent Misskey instances, and other ActivityPub compatible platforms. Misskey is generally considered to be part of the Fediverse. Despite being a decentralized service, Misskey is not philosophically opposed to centralization. The name Misskey comes from the lyrics of Brain Diver, a song by the Japanese singer May'n. == History == Misskey was initially developed as a BBS-style internet forum by high school student Eiji Shinoda in 2014. After introducing a timeline feature, Misskey gained popularity as the microblogging platform it is today. In 2018, Misskey added support for ActivityPub, becoming a federated social media platform. The flagship Misskey server, Misskey.io, was started on April 15, 2019. Misskey, alongside Mastodon and Bluesky, has received attention as a potential replacement for Twitter following Twitter's acquisition by Elon Musk in 2022. On April 8, 2023, Misskey.io incorporated as MisskeyHQ K.K. As of February 2024, over 450,000 users were registered, making it the largest instance of Misskey. Misskey.io is crowdfunded. The administrator of Misskey.io is Japanese system administrator Yoshiki Eto, who operates under the alias Murakami-san. Eiji Shinoda serves as director. In July 2023, Twitter introduced extreme restrictions on their API in order to combat scraping from bots. Some users were critical of the changes, and as a result migrated to other social networks. The number of users registering on Misskey.io, Misskey's official instance and the largest one, increased rapidly, with other Misskey instances also receiving a spike in signups. In response to this trend, Skeb, a platform for sharing art, announced on July 14, 2023 that it would sponsor the Misskey development team. In early 2024, Misskey was targeted by a spam attack from Japan. The cause of the attack is believed to be a dispute between rival groups on a Japanese hacker forum and a DDoS attack on a Discord bot. Mastodon instances with open registration were used in the attack. In November 2025, Eto announced intentions to replace ActivityPub with Misskey's own low-overhead federation system in "a few years". Shinoda later said that this was "fake news". == Development == Misskey is open source software and is licensed under the AGPLv3. The Misskey API is publicly available and is documented using the OpenAPI Specification, which allows users to build automated accounts and use it on any Misskey instance. The service is translated using Crowdin. Misskey is developed using Node.js. TypeScript is used on both the frontend and backend. PostgreSQL is used as its database. Vue.js is used for the frontend. == Functionality == Posts on Misskey are called "notes". Notes are limited to a maximum of 3,000 characters (a limit which can be customized by instances), and can be accompanied by any file, including polls, images, videos, and audio. Notes can be reposted, either by themselves or with another "quote" note. Misskey comes with multiple timelines to sort through the notes that an instance has available, and are displayed in reverse chronological order. The Home timeline shows notes from users that you follow, the Local timeline shows all notes from the instance in use, the Social timeline shows both the Home and Local timeline, and the Global timeline shows every public note that the instance knows about. Notes have customizable privacy settings to control what users can see a note, similar to Mastodon's post visibility ranges. Public notes show up on all timelines, while Home notes only show on a user's Home timeline. Notes can also be set to be available only for followers. Direct messages using notes can be sent to users.
Read more →
Shopify

Shopify Inc., stylized as shopify, is a Canadian multinational e-commerce company headquartered in Ottawa, Ontario that operates a platform for retail point-of-sale systems. The company has over 5 million customers and processed US$292.3 billion in transactions in 2024, of which 57% was in the United States. Major customers include Tesla, LVMH, Nestlé, PepsiCo, AB InBev, Kraft Heinz, Lindt, Whole Foods Market, Red Bull, and Hyatt. The company's software has been praised for its ease of use and reasonable fee structure. It has been described as the "go-to e-commerce platform for startups". However, the company has faced criticism for allegedly inflating their sales data and for associating with controversial sellers. == History == === 2006: Founding === Shopify was founded in 2006 by friends Tobias Lütke, Daniel Weinand and Scott Lake after launching Snowdevil, an online store for snowboarding equipment, in 2004. Dissatisfied with the existing e-commerce products on the market, Lütke, a computer programmer by trade, instead built his own. Lütke used the open source web application framework Ruby on Rails to build Snowdevil's online store and launched it after two months of development. The Snowdevil founders launched the platform as Shopify in June 2006. Shopify created an open-source template language called Liquid, which is written in Ruby and has been used since 2006. In June 2009, Shopify launched an application programming interface (API) platform and App Store. The API allows developers to create applications for Shopify online stores and then sell them on the Shopify App Store. === 2010s === In January 2010, Shopify started its Build-A-Business competition, in which participants create a business using its commerce platform. The winners of the competition received cash prizes and mentorship from entrepreneurs, such as Richard Branson, Eric Ries and others. In April of that year, Shopify launched a free mobile app on the Apple App Store. The app allows Shopify store owners to view and manage their stores from iOS mobile devices. In December 2010, Shopify raised $7 million from a series A round from Bessemer Venture Partners, FirstMark Capital, and Felicis Ventures at a $20 million pre-money valuation. At that time, the company had annualized transaction value of $132 million. In October 2011, it raised $15 million in a Series B round. In August 2013, Shopify launched Shopify Payments in partnership with Stripe. Shopify Payments allows merchants to accept payments without requiring a third-party payment gateway. The company also announced the launch of a point of sale system to enable in-person sales in addition to online. The company received $100 million in Series C funding in December 2013. Shopify earned $105 million in revenue in 2014, twice as much as it raised the previous year. In February 2014, Shopify released "Shopify Plus" for large e-commerce businesses seeking access to additional features and support. Shopify went public via an initial public offering on May 21, 2015 raising more than $131 million. In September 2015, Amazon.com closed its Amazon Webstore service for merchants and selected Shopify as the preferred migration provider; In April 2016, Shopify announced Shopify Capital, a cash advance product. Shopify Capital was initially piloted to merchants within the US and allowed merchants to receive an advance on future earnings processed through its payment gateway. Since its launch in 2016, Shopify Capital has provided more than $5.1 billion in funding to Shopify merchants, with a maximum advance of $2 million. On June 7, 2016, Shopify launched its Shopify Plus Partners Program, to help agencies connect with evolving businesses in ecommerce space. On October 3, 2016, Shopify acquired Boltmade. In November 2016, Shopify partnered with Paystack which allowed Nigerian online retailers to accept payments from customers around the world. On November 22, 2016, Shopify launched Frenzy, a mobile app that improves flash sales. In January 2017, Shopify announced integration with Amazon that would allow merchants to sell on Amazon from their Shopify stores. In April 2017, Shopify introduced its Chip & Swipe Reader, a Bluetooth enabled debit and credit card reader for brick and mortar retail purchases. The company has since released additional technology for brick and mortar retailers, including a point-of-sale system with a Dock and Retail Stand similar to that offered by Square, and a tappable chip card reader. Shopify announced a one-click accelerated checkout feature called Shopify Pay in April 2017 as an exclusive feature for merchants using Shopify Payments as their payment processor. Customers can save their shipping and payment information for future purchases from all participating Shopify stores. In November 2017 Shopify announced Arrive, a mobile application to help customers track packages from both Shopify merchants and other e-commerce websites. In September 2018, Shopify announced plans to expand its office space in Toronto's King West neighborhood in 2022 as part of "The Well" complex, jointly owned by Allied Properties REIT and RioCan REIT. In October 2018, Shopify opened its first flagship, a physical space for business owners in Los Angeles. The space offered educational classes, coworking space, a "genius bar" for companies that use Shopify software, and workshops. Online cannabis sales in Ontario, Canada, used Shopify's software when the drug was legalized in October 2018. Shopify's software is also used for in-person cannabis sales in Ontario since becoming legal in 2019. In January 2019, Shopify announced the launch of Shopify Studios, a full-service television and film content and production house. On March 22, 2019, Shopify and email marketing platform Mailchimp ended an integration agreement over disputes involving customer privacy and data collection. In April 2019, Shopify announced an integration with Snapchat to allow Shopify merchants to buy and manage Snapchat Story ads directly on the Shopify platform. The company had previously secured similar integration partnerships with Facebook and Google. On August 14, 2019, Shopify launched Shopify Chat, a new native chat function that allows merchants to have real-time conversations with customers visiting Shopify stores online. === 2020s === In January 2020, the company announced plans to hire in Vancouver, Canada. Additionally, the effects of the COVID-19 pandemic contributed to lifting stock prices. On February 21, 2020, Shopify announced plans to join the Diem Association, known as Libra Association at the time. Also that month, Shopify Pay was rebranded as Shop Pay. In April, Arrive was rebranded as Shop, combining both customer-facing features under a single brand. In May, during the COVID-19 pandemic, Shopify announced it would shift most of its global workforce to permanent remote work. It was reported that Shopify's valuation would likely rise on the back of options it had in the company Affirm that was expecting to go public shortly. In November 2020, Shopify announced a partnership with Alipay to support merchants with cross-border payments. Shopify also provided the opportunity for users to connect Alibaba and AliExpress to Shopify through a Alibaba Dropshipping app that could be purchased through the Shopify App Store. Multiple applications launched between 2021 and 2024 allowed customers to connect their Shopify store to their Alibaba account and then import and publish your products. The integration automatically syncs inventory and orders between both platforms so that Alibaba vendors can ship directly to dropshipping customers.As a result of Affirm's January 13, 2021 IPO, Shopify's 8% stake in Affirm was worth $2 billion. About half of Shopify's C-level executives left the company in early 2021. On June 29, 2021, Shopify removed the 20% revenue share for app developers that make less than US$1 million per year. On January 18, 2022, Shopify announced a partnership with JD.com to let U.S. merchants expand their operations in China, listing their products on JD's cross-border e-commerce platform JD Worldwide. On March 22, 2022, Shopify introduced Linkpop, a product to create a branded, social marketplace through which merchants can advertise and market their products via links to be added on social media channels. The following month, Shopify, Alphabet Inc., Meta Platforms, McKinsey & Company, and Stripe, Inc. announced a $925 million advance market commitment of carbon dioxide removal (CDR) from companies that are developing CDR technology over the next 9 years. In June 2022, Shopify partnered with Twitter. As a part of the deal, Twitter announced that it would launch a sales channel app for all of Shopify's U.S. merchants through its app store. Shopify also partnered with PayPal to offer Shopify Payments to merchants in France. On July 26, 2022, Lütke announced immediate layoffs totalling roughly 10 percent of its workforce. In
Read more →
Dropbox Paper

Dropbox Paper, or simply Paper, is a collaborative document-editing service developed by Dropbox. Originating from the company's acquisition of document collaboration company Hackpad in April 2014, Dropbox Paper was officially announced in October 2015, and launched in January 2017. It offers a web application, as well as mobile apps for Android and iOS. Dropbox Paper was described in the official announcement post as "a flexible workspace that brings people and ideas together. With Paper, teams can create, review, revise, manage, and organize — all in shared documents". Reception of Dropbox Paper has been mixed. Critics praised collaboration functionality, including content available immediately, the ability to mention specific collaborators, assign tasks, write comments, as well as editing attribution, and revision history. It received particular praise for its support for rich media from a variety of sources, with one reviewer noting that the Paper's support for rich media exceeds the capabilities of most of its competitors. However, it was criticized for a lack of formatting options and editing features. While the user interface was liked for being minimal, reviewers cited the lack of a fixed formatting bar and missing features present in competitors' products as making Dropbox Paper seem like a "light" tool. == History == Dropbox acquired document collaboration company Hackpad in April 2014. A year later, Dropbox launched a Dropbox Notes note-taking product in beta testing phase. Dropbox Paper was officially announced on October 15, 2015, followed by an open beta and release of mobile Android and iOS apps in August 2016. Dropbox Paper was officially released on January 30, 2017. == Reception == In a comparison between Dropbox Paper and Evernote, PC World's Michael Ansaldo wrote that "With its emphasis on document creation, you might expect formatting to be front and center in Dropbox Paper. That's not the case." Ansaldo noted the lack of a "fixed formatting toolbar as you'd find in Evernote or a word processor like Google Docs or Microsoft Word. Instead, the text editor appears as a floating ribbon only when you highlight selected text." The only formatting options available for emphasis were bolding, strikethrough, bulleted and numbered lists, and H1 and H2 tags. Users can also add links, convert text to checklists, and add comments. Ansaldo wrote that "Both Evernote and Dropbox Paper make it easy to add images to a document", but also noted that "Dropbox Paper doesn't support any image editing". Paper supports rich media, and users can "add rich content to your document just by pasting a link to the file. In addition to Dropbox, Paper supports media from a variety of popular services including YouTube, Spotify, Vimeo, SoundCloud, Facebook, and Google's productivity suite. Once the file appears, you can delete the link for a cleaner display." To start working with other people, Paper "allows you to invite people via email from within a document", with sharing options for who can view the link (anyone with the link or just the invited person), and action permissions (edit or only comment). Regarding collaboration, Ansaldo wrote that "Creative collaboration is Paper’s marquee feature, and it provides a variety of ways to work effectively with others in real time". Users can "make any content immediately visible and accessible to a specific collaborator with "@mentions"", and "You can also use @mentions to create and assign task lists within a document." Paper also "boasts essential collaboration tools including comments, editing attribution, and revision history." Writing for TechRadar, John Brandon wrote that Dropbox Paper "might be a 'light' tool for now without the extensive templates of Microsoft Office or the integration with other apps in the Zoho suite, but it does work well with the Dropbox storage service that's so popular with office workers these days." Kyle Wiggers of Digital Trends wrote that Paper is "all about minimizing distractions. Its interface is quite literally a big, blank canvas on which you tap out your agenda. You can organize notes by title and create to-do lists, but even basic formatting tools are obscured from view", noting Paper's "floating box above words and phrases highlighted by your cursor". Wiggers stated that "Paper is not a to-do organizer", but that it's "well suited to the purpose thanks to a bevy of labor-saving conveniences", highlighting that Paper "supports more media than most of its to-do and note-taking counterparts". He praised the collaboration tools, writing that they "are as extensive as you'd hope, and then some", citing its invitation system with permission controls, lists of changes and revision history, comment and chat support, and "perhaps best of all", the ability to assign tasks with a "@" mention. Business Insider's Alex Heath praised that "Paper's interface is spotless and friendly to write in. You don't feel overwhelmed with formatting options", but criticized the available features, writing that "Google Docs is much more full-featured in the formatting department, so Paper has some catching up to do if it wants to be on par with the competition". Writing for The Verge, Casey Newton praised Paper's handling of rich media, complimenting it for being "great", and added that "I imagine that creative types who work on teams will appreciate having rich media embedded in the documents they're working on rather than in a series of infinite tabs".
Read more →
SQLBuddy

SQL Buddy is an open-source web-based application primarily coded in PHP, that allows users to control both MySQL and SQLite database through a web browser. The project was well regarded for its easy installation process and the friendly user interface it offered. The application was further praised for its cross-platform compatibility, meaning users could manage their databases on various operating systems, including Linux, Windows, and macOS. The development of SQL Buddy has stopped, with version 1.3.3 being the final release on January 18, 2011. No further releases are expected.
Read more →
Corel Designer

Corel DESIGNER is a vector-based graphics program. It was originally developed by Micrografx, which was bought by Corel in 2001. The last version developed by Micrografx was 9.0 in 2001. This program was later sold as Corel DESIGNER 9. There are still a number of users who continue working with version 9.0, because newer versions of the product are based on a modified CorelDRAW rather than the original product. Corel DESIGNER is effective for the creation of engineering drawings, but also offers many functions for graphic design. Starting with version X5, Corel DESIGNER Technical Suite includes Corel Designer, CorelDRAW and Corel Photo-Paint. X6 was the last release for Windows XP. == Release history and file formats ==
Read more →
Naked Objects for .NET

Naked Objects for .NET or Naked Objects MVC is a software framework that builds upon the ASP.NET MVC framework. As the name suggests, the framework synthesizes two architectural patterns: naked objects and model–view–controller (MVC). These two patterns have been considered as antithetical. However, Trygve Reenskaug (the inventor of the MVC pattern) has made it clear that he does not see it that way, in his foreword to Richard Pawson's PhD thesis on the Naked Objects pattern. The Naked Objects MVC framework will take a domain model (written as Plain Old CLR Objects) and render it as a complete HTML application without the need for writing any user interface code - by means of a small set of generic View and Controller classes. The framework uses reflection rather than code generation. The developer may then choose to create customised Views and/or Controllers, using standard ASP.NET MVC patterns, for use where the generic user interface is not suitable.
Read more →
IRows

iRows was a web-based spreadsheet in beta with a GUI similar to the traditional desktop-based spreadsheet applications, such as Microsoft Excel and OpenOffice.org. It was shut down on December 31, 2006, after it was announced that its two founders had been hired by Google. iRows used Ajax and XML. It was described as an example of a Web 2.0 system. iRows supported conventional spreadsheet features functions, value formatting and charts and added web oriented spreadsheet capabilities like collaboration (multiple people using a shared spreadsheet, sending a spreadsheet as a link instead of an attachment and ability to publish spreadsheets on other web pages (e.g. blogs).
Read more →