AI Code Ui

AI Code Ui — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Teleradiology

  Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.

  Read more →
• 

  View model

  A view model or viewpoints framework in systems engineering, software engineering, and enterprise engineering is a framework which defines a coherent set of views to be used in the construction of a system architecture, software architecture, or enterprise architecture. A view is a representation of the whole system from the perspective of a related set of concerns. Since the early 1990s there have been a number of efforts to prescribe approaches for describing and analyzing system architectures. A result of these efforts have been to define a set of views (or viewpoints). They are sometimes referred to as architecture frameworks or enterprise architecture frameworks, but are usually called "view models". Usually a view is a work product that presents specific architecture data for a given system. However, the same term is sometimes used to refer to a view definition, including the particular viewpoint and the corresponding guidance that defines each concrete view. The term view model is related to view definitions. == Overview == The purpose of views and viewpoints is to enable humans to comprehend very complex systems, to organize the elements of the problem and the solution around domains of expertise and to separate concerns. In the engineering of physically intensive systems, viewpoints often correspond to capabilities and responsibilities within the engineering organization. Most complex system specifications are so extensive that no single individual can fully comprehend all aspects of the specifications. Furthermore, we all have different interests in a given system and different reasons for examining the system's specifications. A business executive will ask different questions of a system make-up than would a system implementer. The concept of viewpoints framework, therefore, is to provide separate viewpoints into the specification of a given complex system in order to facilitate communication with the stakeholders. Each viewpoint satisfies an audience with interest in a particular set of aspects of the system. Each viewpoint may use a specific viewpoint language that optimizes the vocabulary and presentation for the audience of that viewpoint. Viewpoint modeling has become an effective approach for dealing with the inherent complexity of large distributed systems. Architecture description practices, as described in IEEE Std 1471-2000, utilize multiple views to address several areas of concerns, each one focusing on a specific aspect of the system. Examples of architecture frameworks using multiple views include Kruchten's "4+1" view model, the Zachman Framework, TOGAF, DoDAF, and RM-ODP. == History == In the 1970s, methods began to appear in software engineering for modeling with multiple views. Douglas T. Ross and K.E. Schoman in 1977 introduce the constructs context, viewpoint, and vantage point to organize the modeling process in systems requirements definition. According to Ross and Schoman, a viewpoint "makes clear what aspects are considered relevant to achieving ... the overall purpose [of the model]" and determines How do we look at [a subject being modelled]? As examples of viewpoints, the paper offers: Technical, Operational and Economic viewpoints. In 1992, Anthony Finkelstein and others published a very important paper on viewpoints. In that work: "A viewpoint can be thought of as a combination of the idea of an “actor”, “knowledge source”, “role” or “agent” in the development process and the idea of a “view” or “perspective” which an actor maintains." An important idea in this paper was to distinguish "a representation style, the scheme and notation by which the viewpoint expresses what it can see" and "a specification, the statements expressed in the viewpoint's style describing particular domains". Subsequent work, such as IEEE 1471, preserved this distinction by utilizing two separate terms: viewpoint and view, respectively. Since the early 1990s there have been a number of efforts to codify approaches for describing and analyzing system architectures. These are often termed architecture frameworks or sometimes viewpoint sets. Many of these have been funded by the United States Department of Defense, but some have sprung from international or national efforts in ISO or the IEEE. Among these, the IEEE Recommended Practice for Architectural Description of Software-Intensive Systems (IEEE Std 1471-2000) established useful definitions of view, viewpoint, stakeholder and concern and guidelines for documenting a system architecture through the use of multiple views by applying viewpoints to address stakeholder concerns. The advantage of multiple views is that hidden requirements and stakeholder disagreements can be discovered more readily. However, studies show that in practice, the added complexity of reconciling multiple views can undermine this advantage. IEEE 1471 (now ISO/IEC/IEEE 42010:2011, Systems and software engineering — Architecture description) prescribes the contents of architecture descriptions and describes their creation and use under a number of scenarios, including precedented and unprecedented design, evolutionary design, and capture of design of existing systems. In all of these scenarios the overall process is the same: identify stakeholders, elicit concerns, identify a set of viewpoints to be used, and then apply these viewpoint specifications to develop the set of views relevant to the system of interest. Rather than define a particular set of viewpoints, the standard provides uniform mechanisms and requirements for architects and organizations to define their own viewpoints. In 1996 the ISO Reference Model for Open Distributed Processing (RM-ODP) was published to provide a useful framework for describing the architecture and design of large-scale distributed systems. == View model topics == === View === A view of a system is a representation of the system from the perspective of a viewpoint. This viewpoint on a system involves a perspective focusing on specific concerns regarding the system, which suppresses details to provide a simplified model having only those elements related to the concerns of the viewpoint. For example, a security viewpoint focuses on security concerns and a security viewpoint model contains those elements that are related to security from a more general model of a system. A view allows a user to examine a portion of a particular interest area. For example, an Information View may present all functions, organizations, technology, etc. that use a particular piece of information, while the Organizational View may present all functions, technology, and information of concern to a particular organization. In the Zachman Framework views comprise a group of work products whose development requires a particular analytical and technical expertise because they focus on either the “what,” “how,” “who,” “where,” “when,” or “why” of the enterprise. For example, Functional View work products answer the question “how is the mission carried out?” They are most easily developed by experts in functional decomposition using process and activity modeling. They show the enterprise from the point of view of functions. They also may show organizational and information components, but only as they relate to functions. === Viewpoints === In systems engineering, a viewpoint is a partitioning or restriction of concerns in a system. Adoption of a viewpoint is usable so that issues in those aspects can be addressed separately. A good selection of viewpoints also partitions the design of the system into specific areas of expertise. Viewpoints provide the conventions, rules, and languages for constructing, presenting and analysing views. In ISO/IEC 42010:2007 (IEEE-Std-1471-2000) a viewpoint is a specification for an individual view. A view is a representation of a whole system from the perspective of a viewpoint. A view may consist of one or more architectural models. Each such architectural model is developed using the methods established by its associated architectural system, as well as for the system as a whole. === Modeling perspectives === Modeling perspectives is a set of different ways to represent pre-selected aspects of a system. Each perspective has a different focus, conceptualization, dedication and visualization of what the model is representing. In information systems, the traditional way to divide modeling perspectives is to distinguish the structural, functional and behavioral/processual perspectives. This together with rule, object, communication and actor and role perspectives is one way of classifying modeling approaches === Viewpoint model === In any given viewpoint, it is possible to make a model of the system that contains only the objects that are visible from that viewpoint, but also captures all of the objects, relationships and constraints that are present in the system and relevant to that viewpoint. Such a model is said to be a viewpoint model, or a view of the

  Read more →
• 

  Sahara Net

  Sahara Net is an information and communications technology provider (ICT) serving the Saudi market, the company has rapidly grown since 1989 to offer various complementary services such as connectivity, internet, hosting, cloud, optimization, cyber security, and managed services. == History == Sahara Net is a Saudi Joint Stock Company (JSC) and its history goes back to 1989 when Sahara Net established the 1st Saudi Bulletin Board Service (BBS) in the Kingdom. During this period, it operated as a hub for email exchange in the FidoNet network. And in 1994 Sahara Net started offering Internet connectivity and other related services like internet email, web design, web hosting, and Domain name registry services. These services made the first ISP in Saudi Arabia before the official licensing in 1998, when the Saudi Internet market was regulated and Sahara Net received Internet Service Provider (ISP) license and was appointed as the official Local Internet Registry (LIR) in the Kingdom of Saudi Arabia. == Today == The company grew over these years to become one of the main ICTs in the Saudi Arabian market, extending network coverage to all major cities in Saudi Arabia, and offering various connectivity options to business as well as home users. In 2009, the company was partially acquired by Telindus (the ICT investment arm of Belgacom), the famous telecom operator in Belgium and Europe. Then, in 2014, the company was fully acquired by its original founders. Recently, Sahara Net was converted from an LLC to a JSC with over 1200 shareholders by a capital raise (original founders still control 70% of the shares).

  Read more →
• 

  Decorrelation

  Decorrelation is a general term for any process that is used to reduce autocorrelation within a signal, or cross-correlation within a set of signals, while preserving other aspects of the signal. A frequently used method of decorrelation is the use of a matched linear filter to reduce the autocorrelation of a signal as far as possible. Since the minimum possible autocorrelation for a given signal energy is achieved by equalising the power spectrum of the signal to be similar to that of a white noise signal, this is often referred to as signal whitening. == Process == === Signal processing === Most decorrelation algorithms are linear, but there are also non-linear decorrelation algorithms. Many data compression algorithms incorporate a decorrelation stage. For example, many transform coders first apply a fixed linear transformation that would, on average, have the effect of decorrelating a typical signal of the class to be coded, prior to any later processing. This is typically a Karhunen–Loève transform, or a simplified approximation such as the discrete cosine transform. By comparison, sub-band coders do not generally have an explicit decorrelation step, but instead exploit the already-existing reduced correlation within each of the sub-bands of the signal, due to the relative flatness of each sub-band of the power spectrum in many classes of signals. Linear predictive coders can be modelled as an attempt to decorrelate signals by subtracting the best possible linear prediction from the input signal, leaving a whitened residual signal. Decorrelation techniques can also be used for many other purposes, such as reducing crosstalk in a multi-channel signal, or in the design of echo cancellers. In image processing decorrelation techniques can be used to enhance or stretch, colour differences found in each pixel of an image. This is generally termed as 'decorrelation stretching'. === Neuroscience === In neuroscience, decorrelation is used in the analysis of the neural networks in the human visual system. The raw inputs from cone cells and rod cells under go many steps of processing before it is handled by the visual cortex. These steps generally perform decorrelation, both spatial (surround suppression in the retina) and temporal (handling of movement in the lateral geniculate nucleus). === Cryptography === In cryptography, decorrelation is used in cipher design (see Decorrelation theory) and in the design of hardware random number generators.

  Read more →
• 

  Metigo

  metigo is a software application that performs image-based modelling and close range photogrammetry. It produces rectified imagery plans, true ortho-projections on planar, cylindric and conic surfaces, 3D photorealistic models, measurements from photography and mappings on a photographic base for uses in the cultural heritage sector, mainly conservation. == Products == The metigo product line currently consists of the mapping software metigo MAP, the stereo-photogrammetry modeling software metigo 3D, the free viewer metigo VIEW. These products are all standalone and are not depending on other software, such as AutoCAD. === metigo MAP === metigo MAP is mainly used to map findings and conservation measured on a uniform metric photographic base. Therefore, photos of planar surfaces can be rectified based on geometrical informations, e.g. height and width of a rectangle, or cartesian coordinates measured by total station. Beside rectified imagery several other metric mapping bases can be imported and used: true ortho-projections; scaled scans of plans and plots; CAD-files; 3D models, such as digital surface models (DSM) produced by stereo-photogrammetry, SfM or 3D scanning. metigo MAP 's strong point is that rectified imagery taken with different techniques (visual light, sided light, IR, UV, UV-fluorescence, X-ray), historic images and photos taken at various stages of the conservation process can be superimposed and evaluated mutually. The user can allocate several attributes, such as different conservation measures and damage classes, to the mapped geometries. The mappings can be analysed by geometries as well as by user-defined attributes at any stage of the project. metigo MAP targets mainly conservators in different cultural heritage fields. Using it no specialist knowledge of surveying and photogrammetric techniques are needed. === metigo 3D === metigo 3D is a stereo-photogrammetric kit that allows to calculate bundle adjustments (axios3D), create high-quality 3D point clouds using multiple stereo photo pairs combined with metric survey data, mesh these point clouds, texture the meshes with high-resolution image data to create photo-realistic models, ortho-project orientated images on digital surface models (DSM) on planes and best-fit cylinders and cones, create unwrappings and developed views of curved surfaces, analyse deformations of 3D surfaces. metigo 3D targets metric survey specialists working in the cultural heritage sector. == Supported file formats == metigo has the ability to read the following formats: images: JPEG (.jpg), Tiff (.tif), Bitmaps (.bmp), CompuServ (.gif), Encapsualated Postscript (.eps), PCX (.pcx), Photo-CD (.pcd), PICT (.pcd), PNG (.png), Targa (.tga), RAW-format of several camera brands. CAD: DBX, DXF, DWG. 3D: many ASCII-formats (.stl, .wrl, etc.) point data: format editor for ASCII files. == Supported languages == Currently, an English and German version of the software is supported. For metigo MAP beside these a French and Polish GUI is offered for sale. == Applications == The main applications of metigo are: conservation in the cultural heritage context, e.g. stone conservation paintings tapestry etc. architecture, archaeology, many other are possible, e.g. forensics. == History == The first public release of metigo was in 2000.

  Read more →
• 

  System requirements specification

  A System Requirements Specification (SysRS) (abbreviated SysRS to be distinct from a software requirements specification (SRS)) is a structured collection of information that embodies the requirements of a system. A business analyst (BA), sometimes titled system analyst, is responsible for analyzing the business needs of their clients and stakeholders to help identify business problems and propose solutions. Within the systems development life cycle domain, the BA typically performs a liaison function between the business side of an enterprise and the information technology department or external service providers.

  Read more →
• 

  Valantic

  Valantic GmbH (stylised as valantic) is an IT service and consulting company headquartered in Munich, Germany. == History == Valantic GmbH was founded in 2012 under the name Dabero Service Group. Until it was renamed Valantic GmbH in 2017, the company merged with IT service providers and consulting firms. These included, among others, Realtime AG, a company for SAP systems. The companies involved in these mergers were also renamed in 2017 and have since used the Valantic brand name. Realtime AG, for example, became Valantic ERP Services AG. During the COVID-19 pandemic and the resulting economic pressures, demand increased for IT service providers, particularly those offering customised software, IT consulting, SAP services, customer experience, cybersecurity, IoT, and digital work environments. In the following years, Valantic expanded by integrating additional companies. In 2021, Valantic expanded into other European countries through the integration of the Dutch company ISM eCompany and the Portuguese consulting firm Abaco. In 2022, the consulting firm C-Clear/Atom Ideas from Belgium joined Valantic. In February 2019, DPE Deutsche Private Equity Management III GmbH (DPE) took over the majority shareholding in Valantic. The founder, Holger von Daniels, and the further management retained a 25% stake. By 2025, DPE had invested €500 million in Valantic. In the following years, Valantic expanded its international locations. In 2023, Valantic incorporated the Danish company Inspari into the group, thereby entering the Scandinavian market. Inspari is a company for Microsoft technologies such as Azure and Power Platform. In the same year, Valantic joined forces with the Aiopsgroup, an international provider of online shopping applications for private and business customers of large companies. The company is based in Bulgaria with additional locations across Eastern Europe and other places. Additionally, the SAP applications division was expanded through the merger with the Spanish company Saptools. As a result, the companies became one of the largest European end-to-end consulting and implementation house for SAP services. By the end of 2023, Valantic had locations in 18 countries. In November 2024, Valantic announced its merger with the Danish digital consultancy Venzo. Through the integration of the company, founded in 2007 and oriented towards Microsoft technologies and digital transformation projects in the areas of automation, artificial intelligence, security, infrastructure and change management, Valantic further expanded its presence in Denmark and the Nordic countries. In July 2025, Valantic announced its merger with Utiligence GmbH, a Mannheim-based consulting firm for SAP technologies. Utiligence works primarily for the energy industry and supports companies in the integration of SAP S/4HANA and the digitalisation of business processes. == Company structure == Valantic is a partnership-based organisation, with partners acting as decision-makers in matters relating to corporate strategy, employee development and acquisitions. Valantic pursues a holacratic approach, promoting an open and self-organised way of working instead of hierarchical structures. By merging with other companies, Valantic is expanding its range of services and tapping into international markets and market shares. The new companies use Valantic's core systems and support processes, but usually retain their original structure. In the 2024 financial year, the company generated revenue of €544 million and employed 3,874 on average. Valantic has over 40 locations internationally. == Services == Valantic GmbH is a consulting firm, software provider and implementation partner. The company offers services in the areas of digital strategy and analytics (business intelligence and data science), customer experience management, SAP services, smart industries (Industry 4.0, supply chain management, and production planning and control processes), and financial services automation. The automation of financial services is aimed at financial service providers and banks. Valantic has been offering services in the field of generative artificial intelligence (GenAI) since 2023. Part of these services involves enabling companies to use GenAI securely and in compliance with regulations in order to make internal work processes more efficient. Its customers include large corporations, several medium-sized companies and DAX-listed companies. == Research == Since 2018, Valantic has published an annual study on the development of the SAP landscape in German-speaking countries. The study examines topics such as the migration to SAP S/4HANA, cloud strategies, technological trends and the use of artificial intelligence in business processes. The 2025 survey of 201 SAP professionals from the DACH region showed, for example, an increase in ongoing and completed S/4HANA migration projects, as well as a further shift towards private-cloud systems. The use of artificial intelligence continued to grow, as did the use of the SAP Business Technology Platform and the Business Data Cloud. In 2025, Valantic, together with the Handelsblatt Research Institute, published the trend study Digital 2030 – The Rise of Applied AI. The study was based on a survey of around 700 executives from companies in Germany, Austria, and Switzerland on the economic effects of current digitalisation trends. According to the study, most respondents consider artificial intelligence, cybersecurity, and cloud computing to hold the greatest strategic importance for business success by 2030. Around 70% of the participating companies stated that they are already achieving measurable business benefits through the use of AI applications, for example in quality control, document management, logistics, or customer service.

  Read more →
• 

  MetroHero

  MetroHero is a semi-defunct real-time transit tracking and performance analysis application for the Washington Metro rapid transit system. Originally available on iOS, Android, and the web, it allows users to view live maps of all trains on a specific line, summary statistics relating to real-time system performance, and user feedback on current Metro conditions. The app launched in 2015, followed by ARIES for Transit, a related project from the same developers, and continued functioning until its original developers shut it down in 2023. Afterwards, forks of the application went live to allow for its continued public use, and the Washington Metropolitan Area Transit Authority (WMATA), Metro's operator, announced that it would launch a similar app. The app has been described by local news media as popular and well-liked among Washington, D.C.-area residents. == History and main development == MetroHero was initially developed by James and Jennifer Pizzurro, who both attended George Washington University and studied computer science. They said that they were inspired to create the app after experiencing train delays and searching for an app to track a train after boarding; such an app did not exist for the Washington Metro. The development of the app was not endorsed by WMATA, but it did use publicly available data from the agency. MetroHero launched as an Android application in September 2015, followed by the release of an iOS-compatible web app in December of that year. A standalone iOS app launched in April 2018, but the web app remained supported. By April 2018, MetroHero had approximately 13,000 monthly active users. James Pizzurro has stated that the app's intended audience was regular Metro commuters who wanted to communicate with each other about active problems, as opposed to tourists and riders who only wanted train time data. Throughout the application's development, the Pizzurros had been advocates for Metro's transparency with riders and the community by providing more high-quality data and taking on the feedback of developers. In particular, they criticized Metro's reluctance to uniquely identify individual train trips and its decision to obscure data under certain circumstances, which have posed problems for MetroHero's data collection. In addition to their work on MetroHero, the app's developers led or participated in other initiatives related to transit in the Greater Washington area. In 2019, MetroHero partnered with a local transit group to analyze Metrobus data and publish a "Metrobus Report Card", along with proposed goals and recommendations based on the report's findings. Based on this experience, MetroHero's developers began a sister project, the Adherence + Reliability + Integrity Evaluation System for Transit (ARIES for Transit), which displays data and issues grades for Washington- and Baltimore-area transit systems. Separately, James Pizzurro used MetroHero data to inform Rail Transit OPS, an independent Metro oversight group, and assist in its documentation of Metro system incidents. == Application == The MetroHero application uses several interfaces, including an overall dashboard and a live map, to display data to its users. On the dashboard, system-wide train summary data, such as the number of operating trains and headway adherence, is visible. The map offers a visual representation of all trains' positions throughout the system, filtered by line. Individual stations and trains can be selected to see ratings and comments provided by other users, including both positive and negative notes like cleanliness and crowdedness. Additionally, a list of train wait times is given, along with aggregate data like average wait time. Any train delays or service incidents are visible in the app. MetroHero uses several data sources for the various components of its application. Train positions and other operational data are provided by WMATA as part of its initiative to release open data for third-party developers. However, MetroHero's developers noted that the Metro-provided information is sometimes inaccurate and incomplete, thereby limiting the accuracy of MetroHero. The app also collects crowdsourced data from its users, who can report conditions in train cars and stations and add to reports sent by other people. Additionally, MetroHero parses data from Twitter feeds to learn about system incidents, including delays and fires. In addition to the web app, Android app, and iOS app, MetroHero's initial developers maintained automated social media accounts that alerted customers about Metro service; these accounts were discontinued upon the original app's eventual shutdown. MetroHero also hosts archived performance data for later review, a feature that is sometimes used after major incidents. == Shutdown and future == In February 2023, James Pizzurro announced that MetroHero would be shut down on July 1, 2023, citing "positive changes ... in the app landscape and in WMATA's data management and communication" and the costs and time associated with maintaining the app. Shortly before the application's end date, the Pizzurros shared MetroHero's source code on GitHub, which prompted others to fork the code and begin maintaining new instances of MetroHero to succeed the original app. The original website went offline on July 1, as planned. Historically, WMATA has not offered its own real-time map or similar service, citing other apps from third parties which accomplished the same task. However, on June 30, 2023, Randy Clarke, WMATA's general manager, announced that Metro would begin offering a similar service as MetroHero did. The app, initially named MetroMeter, was planned to begin operating in early July and would provide real-time information on trains, headways, and service schedules. Metro also noted its intentions to extend this service to Metrobus and MetroAccess. On July 20, Metro announced that the app had been renamed to MetroPulse and launched it in beta. MetroHero's other project, ARIES for Transit, was not affected by the shutdown. == Reception == MetroHero was generally well-received and has been recognized for its usage among Washington-area commuters. DCist called it one of the "most praised" Metro tracking apps, and WMATA publicly acknowledged its popularity when announcing its decision to establish MetroPulse. Chris Barnes, a member of the Metro Riders' Advisory Council, said that the app is considered important among riders because it fulfills a need for riders to have reliable and transparent transit information, albeit somewhat hindered by flaws in WMATA's data.

  Read more →
• 

  Intrinsic dimension

  In mathematics, the intrinsic dimension of a subset can be thought of as the minimal number of variables needed to represent the subset. The concept has widespread applications in geometry, dynamical systems, signal processing, statistics, and other fields. Due to its widespread applications and vague conceptualization, there are many different ways to define it rigorously. Consequently, the same set might have different intrinsic dimensions according to different definitions. The intrinsic dimension can be used as a lower bound of what dimension it is possible to compress a data set into through dimension reduction, but it can also be used as a measure of the complexity of the data set or signal. For a data set or signal of N variables, its intrinsic dimension M satisfies 0 ≤ M ≤ N, although estimators may yield higher values. == Exact dimension == === Differential === In differential geometry, given a differentiable manifold N and a submanifold M, the intrinsic dimension of M is its dimension. Suppose N has n dimensions and M has m dimensions, then that means around any point in M, there exists a local coordinate system ( x 1 , … , x m , x m + 1 , … , x n ) {\displaystyle (x_{1},\dots ,x_{m},x_{m+1},\dots ,x_{n})} of N, such that the manifold M is simply the subset of N defined by x m + 1 = 0 , … , x n = 0 {\displaystyle x_{m+1}=0,\dots ,x_{n}=0} . === Metric === Given a mere metric space, we can still define its intrinsic dimension. The most general case is the Hausdorff dimension, though for metric spaces occurring in practice, the box-counting dimension and the packing dimension often are identical to the Hausdorff dimension. Let X , d {\textstyle X,d} be a metric space and A ⊂ X {\textstyle A\subset X} be totally bounded. Define the covering number N ( A , ε ) = min { k : A ⊂ ⋃ i = 1 k B ( x i , ε ) } . {\displaystyle N(A,\varepsilon )=\min \left\{k:A\subset \bigcup _{i=1}^{k}B\left(x_{i},\varepsilon \right)\right\}.} The metric entropy is H ( A , ε ) = log ⁡ N ( A , ε ) {\textstyle H(A,\varepsilon )=\log N(A,\varepsilon )} (any log base). The upper and lower metric entropy dimensions are dim ¯ E A = lim sup ε ↓ 0 H ( A , ε ) log ⁡ ( 1 / ε ) , dim _ E A = lim inf ε ↓ 0 H ( A , ε ) log ⁡ ( 1 / ε ) . {\displaystyle {\overline {\dim }}_{E}A=\limsup _{\varepsilon \downarrow 0}{\frac {H(A,\varepsilon )}{\log(1/\varepsilon )}},\quad {\underline {\dim }}_{E}A=\liminf _{\varepsilon \downarrow 0}{\frac {H(A,\varepsilon )}{\log(1/\varepsilon )}}.} If they are equal, then dim E ⁡ A {\textstyle \operatorname {dim} _{E}A} is that common value, called the metric entropy dimension. The entropy dimensions are usually used in information theory, and especially coding theory, since entropy is involved in its definition. === Topological === If X {\displaystyle X} is merely a topological space, then we can still define its intrinsic dimension, using the topological dimension or Lebesgue covering dimension. An open cover of a topological space X is a family of open sets Uα such that their union is the whole space, ∪ α {\displaystyle \cup _{\alpha }} Uα = X. The order or ply of an open cover A {\displaystyle {\mathfrak {A}}} = {Uα} is the smallest number m (if it exists) for which each point of the space belongs to at most m open sets in the cover: in other words Uα1 ∩ ⋅⋅⋅ ∩ Uαm+1 = ∅ {\displaystyle \emptyset } for α1, ..., αm+1 distinct. A refinement of an open cover A {\displaystyle {\mathfrak {A}}} = {Uα} is another open cover B {\displaystyle {\mathfrak {B}}} = {Vβ}, such that each Vβ is contained in some Uα. The covering dimension of a topological space X is defined to be the minimum value of n such that every finite open cover A {\displaystyle {\mathfrak {A}}} of X has an open refinement B {\displaystyle {\mathfrak {B}}} with order n + 1. The refinement B {\displaystyle {\mathfrak {B}}} can always be chosen to be finite. Thus, if n is finite, Vβ1 ∩ ⋅⋅⋅ ∩ Vβn+2 = ∅ {\displaystyle \emptyset } for β1, ..., βn+2 distinct. If no such minimal n exists, the space is said to have infinite covering dimension. == Introductory example == Let f ( x 1 , x 2 ) {\textstyle f(x_{1},x_{2})} be a two-variable function (or signal) which is of the form f ( x 1 , x 2 ) = g ( x 1 ) {\textstyle f(x_{1},x_{2})=g(x_{1})} for some one-variable function g which is not constant. This means that f varies, in accordance to g, with the first variable or along the first coordinate. On the other hand, f is constant with respect to the second variable or along the second coordinate. It is only necessary to know the value of one, namely the first, variable in order to determine the value of f. Hence, it is a two-variable function but its intrinsic dimension is one. A slightly more complicated example is f ( x 1 , x 2 ) = g ( x 1 + x 2 ) {\textstyle f(x_{1},x_{2})=g(x_{1}+x_{2})} . f is still intrinsic one-dimensional, which can be seen by making a variable transformation y 1 = x 1 + x 2 {\textstyle y_{1}=x_{1}+x_{2}} and y 2 = x 1 − x 2 {\textstyle y_{2}=x_{1}-x_{2}} which gives f ( y 1 + y 2 2 , y 1 − y 2 2 ) = g ( y 1 ) {\textstyle f\left({\frac {y_{1}+y_{2}}{2}},{\frac {y_{1}-y_{2}}{2}}\right)=g\left(y_{1}\right)} . Since the variation in f can be described by the single variable y1 its intrinsic dimension is one. For the case that f is constant, its intrinsic dimension is zero since no variable is needed to describe variation. For the general case, when the intrinsic dimension of the two-variable function f is neither zero or one, it is two. In the literature, functions which are of intrinsic dimension zero, one, or two are sometimes referred to as i0D, i1D or i2D, respectively. == Signal processing == In signal processing of multidimensional signals, the intrinsic dimension of the signal describes how many variables are needed to generate a good approximation of the signal. For an N-variable function f, the set of variables can be represented as an N-dimensional vector x: f = f ( x ) where x = ( x 1 , … , x N ) {\textstyle f=f\left(\mathbf {x} \right){\text{ where }}\mathbf {x} =\left(x_{1},\dots ,x_{N}\right)} . If for some M-variable function g and M × N matrix A it is the case that for all x; f ( x ) = g ( A x ) , {\textstyle f(\mathbf {x} )=g(\mathbf {Ax} ),} M is the smallest number for which the above relation between f and g can be found, then the intrinsic dimension of f is M. The intrinsic dimension is a characterization of f, it is not an unambiguous characterization of g nor of A. That is, if the above relation is satisfied for some f, g, and A, it must also be satisfied for the same f and g′ and A′ given by g ′ ( y ) = g ( B y ) {\textstyle g'\left(\mathbf {y} \right)=g\left(\mathbf {By} \right)} and A ′ = B − 1 A {\textstyle \mathbf {A'} =\mathbf {B} ^{-1}\mathbf {A} } where B is a non-singular M × M matrix, since f ( x ) = g ′ ( A ′ x ) = g ( B A ′ x ) = g ( A x ) {\textstyle f\left(\mathbf {x} \right)=g'\left(\mathbf {A'x} \right)=g\left(\mathbf {BA'x} \right)=g\left(\mathbf {Ax} \right)} . == The Fourier transform of signals of low intrinsic dimension == An N variable function which has intrinsic dimension M < N has a characteristic Fourier transform. Intuitively, since this type of function is constant along one or several dimensions its Fourier transform must appear like an impulse (the Fourier transform of a constant) along the same dimension in the frequency domain. === A simple example === Let f be a two-variable function which is i1D. This means that there exists a normalized vector n ∈ R 2 {\textstyle \mathbf {n} \in \mathbb {R} ^{2}} and a one-variable function g such that f ( x ) = g ( n T x ) {\textstyle f(\mathbf {x} )=g(\mathbf {n} ^{\operatorname {T} }\mathbf {x} )} for all x ∈ R 2 {\textstyle \mathbf {x} \in \mathbb {R} ^{2}} . If F is the Fourier transform of f (both are two-variable functions) it must be the case that F ( u ) = G ( n T u ) ⋅ δ ( m T u ) {\textstyle F\left(\mathbf {u} \right)=G\left(\mathbf {n} ^{\mathrm {T} }\mathbf {u} \right)\cdot \delta \left(\mathbf {m} ^{\mathrm {T} }\mathbf {u} \right)} . Here G is the Fourier transform of g (both are one-variable functions), δ is the Dirac impulse function and m is a normalized vector in R 2 {\textstyle \mathbb {R} ^{2}} perpendicular to n. This means that F vanishes everywhere except on a line which passes through the origin of the frequency domain and is parallel to m. Along this line F varies according to G. === The general case === Let f be an N-variable function which has intrinsic dimension M, that is, there exists an M-variable function g and M × N matrix A such that f ( x ) = g ( A x ) ∀ x {\textstyle f(\mathbf {x} )=g(\mathbf {Ax} )\quad \forall \mathbf {x} } . Its Fourier transform F can then be described as follows: F vanishes everywhere except for a subspace of dimension M The subspace M is spanned by the rows of the matrix A In the subspace, F varies according to G the Fourier transform of g == Generalizations == The type of intrinsic dimension described above assume

  Read more →
• 

  Business Controls Corporation

  Business Controls Corporation is a privately held computer company that developed an application-program-generator and also a series of accounting software packages. These packages were widely enough used for various business magazines to have back-of-the-book ads for companies seeking accountants with experience in one or more of them. Computer magazines ran coverage for their SB-5 application-program-generator as from time to time new versions were released, each with new or improved features. == Early days == The company's initial offerings were packages for the DEC PDP-8, although Business Controls Corporation also wrote custom-written programs for customers. Large customers with mainframes who also used smaller systems for departmental use and distributed processing also used BCC's services. == SB-5 == The addition of an application-program-generator named SB-5 that, from specifications, could generate COBOL code was a major step forward. Although this began with supporting the DEC PDP-11, they subsequently began to support COBOL on DEC's DECsystem-10 & DECSYSTEM-20. VAX support came later. The specifications also permitted COBOL inserts and overrides: SB-5 could build an application that was all COBOL, yet only code the portions that varied from BCC's "vanilla" accounting packages. === Similar offerings === A similar idea was done for the IBM mainframe world in the form of a series of application-program-generators from Dylakor Corporation. They were named DYL-250, DYL-260, DYL-270 & DYL-280. Dylakor was acquired by Computer Associates. The specific syntax was different, but it had wider use, and - a mark of success and recognition in the industry - syntax-compatible implementations were released by a competitor. Still another alternative was Peat Marwick Mitchell's PMM2170 application-program-generator package. Like the others, it supported COBOL inserts and overrides. === Extended integration === Business Controls Corporation subsequently extended SB-5's feature set to provide support for System 1022, a product for the DECsystem-10 & DECSYSTEM-20; 1022's vendor also had a VAX/VMS (later OpenVMS) product, System 1032.

  Read more →
• 

  EasyChair

  EasyChair is a web-based conference management software system. It has been used since 2002 in the scientific community for tasks such as organising research paper submission and review. In 2012, EasyChair added an open access online publication service for conference proceedings. == Description == EasyChair is a paid web-based conference management software system used, among other tasks, to organize paper submission and review, similar to other event management system software such as OpenConf. EasyChair used to be run by the Department of Computer Science at the University of Manchester but now it is a commercial service, owned by EasyChair Ltd. in Stockport (established 2016). EasyChair used to be free, for standard service, but as of 2022, only minimal services are free. The EasyChair website also provides an open access online publication service for conference proceedings. When launched in 2012, the service was for computer science only, but in 2016 it was expanded to all sciences. == History == The EasyChair software has been in continuous development since 2002. As of 2015, the code base consists of nearly 300,000 lines of code, and it has been used by more than 41,000 conferences. More than two and a half million users in the scientific community reported using it in 2019.

  Read more →
• 

  TinEye

  TinEye is a reverse image search engine developed and offered by Idée, Inc., a company based in Toronto, Ontario, Canada. It was the first image search engine on the web to use image identification technology rather than keywords, metadata or watermarks. TinEye allows users to search not using keywords but with images. Upon submitting an image, TinEye creates a "unique and compact digital signature or fingerprint" of the image and matches it with other indexed images. This procedure is able to match even heavily edited versions of the submitted image, but will not usually return similar images in the results. == History == Idée, Inc. was founded by Leila Boujnane and Paul Bloore in 1999. Idée launched the service on May 6, 2008 and went into open beta in August that year. While computer vision and image identification research projects began as early as the 1980s, the company claims that TinEye is the first web-based image search engine to use image identification technology. The service was created with copyright owners and brand marketers as the intended user base, to look up unauthorized use and track where the brands are showing up respectively. In June 2014, TinEye claimed to have indexed more than five billion images for comparisons. However, this is a relatively small proportion of the total number of images available on the World Wide Web. As of September 2025, TinEye's search results claim to have over 77.6 billion images indexed for comparison. == Technology == A user uploads an image to the search engine (the upload size is limited to 20 MB) or provides a URL for an image or for a page containing the image. The search engine will look up other usage of the image in the internet, including modified images based upon that image, and report the date and time at which they were posted. TinEye does not recognize outlines of objects or perform facial recognition, but recognizes the entire image, and some altered versions of that image. This includes smaller, larger, and cropped versions of the image. TinEye has shown itself capable of retrieving different images from its database of the same subject, such as famous landmarks. TinEye is capable of searching for images in JPEG, PNG, WebP, GIF, BMP and TIFF format. Results generated from TinEye include the total number of matches in their database, a preview image, and the URL to each match. TinEye can sort results by best match, most changed, biggest image, newest, and oldest. User registration is optional and offers storage of the user's previous queries. Other features include embeddable widgets and bookmarklets. TinEye has also released their commercial API. == Usage == TinEye's ability to search the web for specific images (and modifications of those images) makes it a potential tool for the copyright holders of visual works to locate infringements on their copyright. It also creates a possible avenue for people who are looking to make use of imagery under orphan works to find the copyright holders of that imagery. Being that orphan works can be defined as "copyrighted works whose owners are difficult or impossible to identify and/or locate," the use of TinEye could potentially remove the orphan work status from online images that can be found in its database. === Fact-checking === It has been recommended by fact-checkers as a useful resource in attempts to verify the origin of images. As of 2019, TinEye specialized in copyright violations and finding exact versions of images online.

  Read more →
• 

  GeneXus

  GeneXus is a low code, cross-platform, knowledge representation-based development tool, mainly oriented towards enterprise-class applications for web applications, smart devices, and the Microsoft Windows platform. GeneXus uses mostly declarative language to generate native code for multiple environments. It includes a normalization module, which creates and maintains an optimal database structure based on user views. The languages for which code can be generated include COBOL, Java, Objective-C, RPG, Ruby, Visual Basic, and Visual FoxPro. Some of the DBMSs supported are Microsoft SQL Server, Oracle, IBM Db2, Informix, PostgreSQL, and MySQL. GeneXus was developed by Uruguayan company ARTech Consultores SRL which later renamed to Genexus SA. The latest version is GeneXus 18, which was released on November 10, 2022.

  Read more →
• 

  Unit of work

  A unit of work is a behavioral pattern in software development. Martin Fowler has defined it as everything one does during a business transaction which can affect the database. When the unit of work is finished, it will provide everything that needs to be done to change the database as a result of the work. A unit of work encapsulates one or more code repositories[de] and a list of actions to be performed which are necessary for the successful implementation of self-contained and consistent data change. A unit of work is also responsible for handling concurrency issues, and can be used for transactions and stability patterns.[de]

  Read more →
• 

  Web application firewall

  A Web application firewall (WAF) is a specific form of application firewall that filters, monitors, and blocks HTTP traffic to and from a web service. By inspecting HTTP traffic, it can prevent attacks exploiting a Web application's known vulnerabilities, such as SQL injection, cross-site scripting (XSS), file inclusion, and improper system configuration. Financial institutions often utilize WAFs to help in the mitigation of Web application zero-day vulnerabilities, as well as hard-to-patch bugs or weaknesses through custom attack signature strings. == History == Dedicated Web application firewalls entered the market in the late 1990s during a time when web server attacks were becoming more prevalent. Early WAF products, from Kavado and Gilian technologies, tried to solve the increasing amount of attacks on Web applications in the late 1990s. In 2002, the open-source project ModSecurity was formed in order to make WAF technology more accessible. They finalized a core rule set for protecting Web applications, based on OASIS Web Application Security Technical Committee’s (WAS TC) vulnerability work. In 2003, they expanded and standardized rules through the Open Web Application Security Project’s (OWASP) Top 10 List, an annual ranking for Web security vulnerabilities. This list would become the industry standard for Web application security compliance. Since then, the market has continued to grow and evolve, especially focusing on credit card fraud prevention. With the development of the Payment Card Industry Data Security Standard (PCI DSS), a standardization of control over cardholder data, security has become more regulated in this sector. == Description == A Web application firewall is a special type of application firewall that applies specifically to Web applications. It is deployed in front of Web applications and analyzes bi-directional web-based (HTTP) traffic – detecting and blocking anything malicious. The OWASP provides a broad technical definition for a WAF as “a security solution on the Web application level which – from a technical point of view – does not depend on the application itself”. According to the PCI DSS Information Supplement for requirement 6.6, a WAF is defined as “a security policy enforcement point positioned between a Web application and the client endpoint. This functionality can be implemented in software or hardware, running in an appliance device, or in a typical server running a common operating system. It may be a stand-alone device or integrated into other network components.” In other words, a WAF can be a virtual or physical appliance that prevents vulnerabilities in Web applications from being exploited by outside threats. These vulnerabilities may be because the application itself is a legacy type or was insufficiently coded by design. The WAF addresses these code shortcomings by special configurations of rule-sets, also known as policies. Previously unknown vulnerabilities can be discovered through penetration testing or via a vulnerability scanner. A Web application vulnerability scanner, also known as a web application security scanner, is defined in the SAMATE NIST 500-269 as “an automated program that examines Web applications for potential security vulnerabilities. In addition to searching for Web application-specific vulnerabilities, the tools also look for software coding errors.” Resolving vulnerabilities is commonly referred to as remediation. Corrections to the code can be made in the application, but typically a more prompt response is necessary. In these situations, the application of a custom policy for a unique Web application vulnerability to provide a temporary but immediate fix (known as a virtual patch) may be necessary. WAFs are not an ultimate security solution, rather they are meant to be used in conjunction with other network perimeter security solutions such as network firewalls and intrusion prevention systems to provide a holistic defense strategy. WAFs typically follow a positive security model, a negative security, or a combination of both as mentioned by the SANS Institute. WAFs use a combination of rule-based logic, parsing, and signatures to detect and prevent attacks such as cross-site scripting and SQL injection. In general, features like browser emulation, obfuscation and virtualization, and IP obfuscation are used to attempt to bypass WAFs. The OWASP produces a list of the top ten Web application security flaws. All commercial WAF offerings cover these ten flaws at a minimum. There are non-commercial options as well. As mentioned earlier, the well-known open-source WAF engine called ModSecurity is one of these options. A WAF engine alone is insufficient to provide adequate protection, therefore OWASP along with Trustwave's Spiderlabs help organize and maintain a Core-Rule Set via GitHub to use with the ModSecurity WAF engine. == Deployment options == Although the names for operating mode may differ, WAFs are basically deployed inline in three different ways. According to NSS Labs, deployment options are transparent bridge, transparent reverse proxy, and reverse proxy. "Transparent" refers to the fact that the HTTP traffic is sent straight to the Web application, therefore the WAF is transparent between the client and server. This is in contrast to reverse proxy, where the WAF acts as a proxy, and the client’s traffic is sent directly to the WAF. The WAF then separately sends filtered traffic to Web applications. This can provide additional benefits such as IP masking but may introduce disadvantages such as performance latencies. == JA3 fingerprint == JA3, developed by Salesforce in 2017, is a technique for generating a unique fingerprint for SSL/TLS traffic based on specific fields in the handshake, such as the version, cipher suites, and extensions used by the client. This fingerprint enables the identification and tracking of clients based on the characteristics of their encrypted traffic. In the context of distributed denial of service (DDoS) protection, JA3 fingerprints are used to detect and differentiate malicious traffic, often associated with attack bots, from legitimate traffic, allowing for more precise filtering of potential threats. In September 2023, AWS WAF announced built-in support for JA3, enabling customers to inspect the JA3 fingerprints of incoming requests. JA3 was deprecated in May 2025 in favor of JA4. JA4 is currently patent pending.

  Read more →