AI Code Unlimited

AI Code Unlimited — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Zeuthen strategy

    Zeuthen strategy

    The Zeuthen strategy in cognitive science is a negotiation strategy used by some artificial agents. Its purpose is to measure the willingness to risk conflict. An agent will be more willing to risk conflict if it does not have much to lose in case that the negotiation fails. In contrast, an agent is less willing to risk conflict when it has more to lose. The value of a deal is expressed in its utility. An agent has much to lose when the difference between the utility of its current proposal and the conflict deal is high. When both agents use the monotonic concession protocol, the Zeuthen strategy leads them to agree upon a deal in the negotiation set. This set consists of all conflict free deals, which are individually rational and Pareto optimal, and the conflict deal, which maximizes the Nash product. The strategy was introduced in 1930 by the Danish economist Frederik Zeuthen. == Three key questions == The Zeuthen strategy answers three open questions that arise when using the monotonic concession protocol, namely: Which deal should be proposed at first? On any given round, who should concede? In case of a concession, how much should the agent concede? The answer to the first question is that any agent should start with its most preferred deal, because that deal has the highest utility for that agent. The second answer is that the agent with the smallest value of Risk(i,t) concedes, because the agent with the lowest utility for the conflict deal profits most from avoiding conflict. To the third question, the Zeuthen strategy suggests that the conceding agent should concede just enough raise its value of Risk(i,t) just above that of the other agent. This prevents the conceding agent to have to concede again in the next round. == Risk == Risk ( i , t ) = { 1 U i ( δ ( i , t ) ) = 0 U i ( δ ( i , t ) ) − U i ( δ ( j , t ) ) U i ( δ ( i , t ) ) otherwise {\displaystyle {\text{Risk}}(i,t)={\begin{cases}1&U_{i}(\delta (i,t))=0\\{\frac {U_{i}(\delta (i,t))-U_{i}(\delta (j,t))}{U_{i}(\delta (i,t))}}&{\text{otherwise}}\end{cases}}} Risk(i,t) is a measurement of agent i's willingness to risk conflict. The risk function formalizes the notion that an agent's willingness to risk conflict is the ratio of the utility that agent would lose by accepting the other agent's proposal to the utility that agent would lose by causing a conflict. Agent i is said to be using a rational negotiation strategy if at any step t + 1 that agent i sticks to his last proposal, Risk(i,t) > Risk(j,t). == Sufficient concession == If agent i makes a sufficient concession in the next step, then, assuming that agent j is using a rational negotiation strategy, if agent j does not concede in the next step, he must do so in the step after that. The set of all sufficient concessions of agent i at step t is denoted SC(i, t). == Minimal sufficient concession == δ ′ = arg ⁡ max δ ∈ S C ( A , t ) { U A ( δ ) } {\displaystyle \delta '=\arg \max _{\delta \in {SC(A,t)}}\{U_{A}(\delta )\}} is the minimal sufficient concession of agent A in step t. Agent A begins the negotiation by proposing δ ( A , 0 ) = arg ⁡ max δ ∈ N S U A ( δ ) {\displaystyle \delta (A,0)=\arg \max _{\delta \in {NS}}U_{A}(\delta )} and will make the minimal sufficient concession in step t + 1 if and only if Risk(A,t) ≤ Risk(B,t). Theorem If both agents are using Zeuthen strategies, then they will agree on δ = arg ⁡ max δ ′ ∈ N S { π ( δ ′ ) } , {\displaystyle \delta =\arg \max _{\delta '\in {NS}}\{\pi (\delta ')\},} that is, the deal which maximizes the Nash product. Proof Let δA = δ(A,t). Let δB = δ(B,t). According to the Zeuthen strategy, agent A will concede at step t {\displaystyle t} if and only if R i s k ( A , t ) ≤ R i s k ( B , t ) . {\displaystyle Risk(A,t)\leq Risk(B,t).} That is, if and only if U A ( δ A ) − U A ( δ B ) U A ( δ A ) ≤ U B ( δ B ) − U B ( δ A ) U B ( δ B ) {\displaystyle {\frac {U_{A}(\delta _{A})-U_{A}(\delta _{B})}{U_{A}(\delta _{A})}}\leq {\frac {U_{B}(\delta _{B})-U_{B}(\delta _{A})}{U_{B}(\delta _{B})}}} U B ( δ B ) ( U A ( δ A ) − U A ( δ B ) ) ≤ U A ( δ A ) ( U B ( δ B ) − U B ( δ A ) ) {\displaystyle U_{B}(\delta _{B})(U_{A}(\delta _{A})-U_{A}(\delta _{B}))\leq U_{A}(\delta _{A})(U_{B}(\delta _{B})-U_{B}(\delta _{A}))} U A ( δ A ) U B ( δ B ) − U A ( δ B ) U B ( δ B ) ≤ U A ( δ A ) U B ( δ B ) − U A ( δ A ) U B ( δ A ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{B})U_{B}(\delta _{B})\leq U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{A})U_{B}(\delta _{A})} − U A ( δ B ) U B ( δ B ) ≤ − U A ( δ A ) U B ( δ A ) {\displaystyle -U_{A}(\delta _{B})U_{B}(\delta _{B})\leq -U_{A}(\delta _{A})U_{B}(\delta _{A})} U A ( δ A ) U B ( δ A ) ≤ U A ( δ B ) U B ( δ B ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{A})\leq U_{A}(\delta _{B})U_{B}(\delta _{B})} π ( δ A ) ≤ π ( δ B ) {\displaystyle \pi (\delta _{A})\leq \pi (\delta _{B})} Thus, Agent A will concede if and only if δ A {\displaystyle \delta _{A}} does not yield the larger product of utilities. Therefore, the Zeuthen strategy guarantees a final agreement that maximizes the Nash Product.

    Read more →
  • Scripped

    Scripped

    Scripped was an online screenplay services company offering three services: script writing, script registration, and script coverage. Scripped did not facilitate collaboration among screenwriters. It combined with Zhura in 2010. According to Techcrunch, Scripped had more than 60,000 writers as of March 2010. Scripped was administered by Sunil Rajaraman, Ryan Buckley and Zak Freer. Actor, writer, and director Edward Burns and screenwriter Steven E. de Souza joined Scripped's Board of Advisers in May 2008. In 2008, the company formed a partnership with Write Brothers, makers of Movie Magic Screenwriter software. On March 29, 2010, Scripped announced that it closed $250,000 in private investment and merged with competitor Zhura. Scripped's CEO, Sunil Rajaraman, remains the merged company's Chief Executive Officer. On April 1, 2015, citing a serious technical failure, Scripped shuttered its service. As part of the announcement, it was disclosed that their backup servers had failed as well, losing all of its users' stored scripts. The website URL currently redirects to WriterDuet's website, another online scriptwriting service; Scripped had advertised WriterDuet in Scripped's shutdown open letter. == Features == The Scripped Writer provided a built-in screenplay template which formatted the document to a standard for scripts as recommended by the AMPAS. The screenplay document was composed of seven elements: scene, action, character, dialog, parenthetical, transition and general. Each element had a specific style to which the Scripped Writer conformed as text was entered. Like other client-side screenplay software, Scripped offered Tab-Enter toggling between screenplay elements, making the writing process much faster. Text files could be imported into the Scripped Writer and automatically conformed to the screenplay template. Completed scripts could be exported as PDF files. In May 2011 the administrators of Scripped launched Scripted.com - a sister site focused on freelance writing jobs. Subsequent to the service's launch, the company was renamed to Scripted, Inc.

    Read more →
  • SAP BTP

    SAP BTP

    SAP Business Technology Platform (SAP BTP) is a platform as a service developed by SAP SE that offers a suite of services including database and data management, AI, analytics, application development, automation and integration all running on one unified platform. == Overview == SAP BTP is made up of four components: Application development and automation: to create applications or extend existing applications. Data and analytics: to access and analyze data across SAP and third-party systems using multi-cloud architecture. Integration: to integrate and connect applications and data. Artificial Intelligence (AI): to access large language models (LLMs) to develop AI. == History == SAP BTP was introduced as part of the SAP strategy to unify its portfolio and cloud offerings under a single platform. The platform was evolved from earlier initiatives such as SAP Cloud Platform and now serves as the central hub for cloud, data, analytics, integration and AI technologies. Initially unveiled as "SAP NetWeaver Cloud" belonging to the SAP HANA Cloud portfolio on October 16, 2012 the cloud platform was reintroduced with the new name "SAP HANA Cloud Platform" on May 13, 2013 as the foundation for SAP cloud products, including the SAP BusinessObjects Cloud. Adoption of the SAP HANA Cloud Platform in 2015 stood at over 4000 customers and 500 partners. In 2016, SAP and Apple Inc. partnered to develop mobile applications on iOS using cloud-based software development kits (SDKs) for the SAP Cloud Platform. On February 27, 2017, SAP HANA Cloud Platform was renamed "SAP Cloud Platform" at the Mobile World Congress. On January 18, 2021, the name "SAP Cloud Platform" was retired from the SAP product portfolio to support SAP BTP. As of October 2024, SAP states that SAP BTP is used by more than 27,000 customers and more than 2,800 partners. Recently, SAP Business One has worked on improving the functionalities of BTP to cater for the demands of digital transformation. The platform offers comprehensive services in AI, application development, automation, integration, data management, and analytics.

    Read more →
  • FlowVella

    FlowVella

    FlowVella (formerly Flowboard) is an interactive presentation platform that includes an iPad/iPhone app, a Mac app and web site for viewing presentations, built first for the iPad and web. FlowVella allows users to create, publish and share presentations through their cloud-based SaaS system. FlowVella allows embedding of text, images, PDFs, video and gallery objects in easy linkable screens, defining modern interactive presentations. FlowVella grew out of Treemo Labs. == History == FlowVella launched as 'Flowboard' on April 18, 2013 after being built for almost a year. FlowVella was incubated out of Treemo Labs, which had years of experience building native apps for iPhone, iPad and Android devices. FlowVella is an iPad app and Mac app where users create, view, publish and share interactive presentations. Presentations are viewable on flowvella.com through a web-based viewer on any device or through the FlowVella native iPad app or Mac app. On December 18, 2014, Flowboard rebranded as FlowVella after a trademark dispute. == Presentation format == FlowVella is an interactive presentation format where instead of single directional slides, presentations are made up of linkable screens with embeddable media and content objects. While 'Flows' can be exported to PDF, they all have a web address and are meant to be viewed via a web browser or the FlowVella native applications. == Revenue model == FlowVella uses the freemium model for its presentation apps. Free users can make 4 public presentations with limited number of screens/slides, but most features are available to try out the software. In 2016, FlowVella introduced a second paid plan called PRO which includes team sharing, tracking and newly introduced 'Kiosk Mode' that launched in March of 2017. == Features == FlowVella is a native iPad app and Mac app which has advantages over web based tools. All downloaded presentations can be viewed offline, without an Internet connection. This includes videos which are enabled by caching the video files into memory. For students, teachers, sales people and all users, this is extremely important because this prevents having a presentation fail because of lack of an Internet connection. Beyond the offline capabilities, there is a trend to build native applications versus HTML5 as noted by Facebook and LinkedIn both rebuilding their mobile apps as 100% native applications.

    Read more →
  • 1 Second Everyday

    1 Second Everyday

    1 Second Everyday (1SE) is an application developed by Cesar Kuriyama. The application allows the user to record one second of video every day and then chronologically edits (mashes) them together into a single film. It is compatible with iOS and Android. The idea of the application was developed by Kuriyama's 1 Second Everyday — Age 30 video. The application was launched in January 2013. 1 Second Everyday played a part in the plot of Chef and also became the inspiration for the 2014 short animated clip Feast. == Background == === Kuriyama's video === In February 2011, when Cesar Kuriyama turned 30, after saving money, he quit his job in an advertising firm and took a year off to travel. During this time, he started working on a project he called 1 Second Everyday. As part of the project, every day he recorded one second of video – something that was supposed to help him remember that day. He started the project because he was frustrated with his memory. He planned to stockpile the 365 one-second clips into one film to serve as a memento of his year. While working on the project Kuriyama realized that recording one second every day impacted the decisions he made in a positive way. After a year he made a 365-second clip out of his recordings. The video called 1 Second Everyday – Age 30, went viral. According to Kuriyama, he was initially inspired to take a year off from work by a TED talk given by Stefan Sagmeister called "The Power of Time Off." Kuriyama also delivered a TED talk about 1 Second Everyday in 2012 at TED 2012 in Long Beach California. === Kickstarter campaign === After completing his own video, Kuriyama decided to develop an application that would allow the users to record one second every day and compile their own videos. He developed a prototype of the application and then in 2012, he launched a Kickstarter campaign to raise funds for completing the application. The campaign became one of the most backed app campaigns in the history of Kickstarter. It was backed by 11,281 backers who pledged a total of $56,959 on an initial goal of $20,000. Following the completion of the Kickstarter campaign, he partnered with an application design studio in Brooklyn to develop the application. 1 Second Everyday was released two weeks after the completion of its Kickstarter campaign. == Application == The application was released for iOS on 10 January 2013. An Android-compatible version of the application was developed later. Using it, the user can record the videos in the application or they can select one second portions from their libraries. 1 Second Everyday dates every snippet. The user can also set alarms to remember to record their daily video. In order to compile a video, the user selects the seconds they want and the application creates a compilation video. The user can keep multiple timelines. It also allows users to post directly on social networks. The main interface in 1 Second Everyday is a calendar, which shows the user which days have snippets and which they can still fill in. In the beginning, 1 Second Everyday restricted the recording to one second. However, the developers later released Super Seconds, which allowed users to record an additional half a second video. In 2014, 1 Second Everyday Crowds was launched, which is an area in the application featuring compilations of second clips from different users. == In the media == The Kickstarter campaign of 1 Second Everyday was featured in Entrepreneur's 3 Innovative Tech Startups on Kickstarter Right Now in 2012. The application was featured in The New York Times, The Washington Post, Gawker and other media outlets. By the end of the launch day, it was in Top 10 Free Apps on App Store. It was also selected as the App of the Week on GeekWire in 2013. Several other one-second compilation videos were also posted on the Internet after Kuriyama's video gained media attention. Sam Cornwell, an English photographer documented his son Indigo's growth using a montage of one-second iPhone clips. He shot these clips every single day from the moment of birth right up to the baby's first birthday. According to Cornwell, he was inspired by Kuriyama's project. The video of Cornwell's son gained considerable media attention after it was posted on YouTube. Save the Children also made a video commercial based on a similar format that showed a British girl oblivious of the Syrian war end up being a refugee. 1SE was a finalist for the Fast Company Innovation by Design Award in 2015, but lost to Google Maps. In 2015, Google Android created a gallery, Leap Second 2015, with the help of Droga5 and Kuriyama. The gallery showcased how people around the world enjoyed the one extra second of their lives. Through the 1 Second Everyday app available at Google Play, people were able to submit their extra second, which were then vetted and added to the gallery. The viewers were able to view other celebratory seconds from around the world as well as searching for them using different hashtags.

    Read more →
  • DAvE (Infineon)

    DAvE (Infineon)

    DAVE, or Digital Application Virtual Engineer, is a software development and code generation tool for microcontroller applications created in C/C++. == Versions == === Version 4 (beta) === The successor of the Eclipse-based development environment for C/C++ and/or graphical user interface (GUI) based development using application software (apps). It generates code for the latest XMC1xxx and XMC4xxx microcontrollers using ARM Cortex-M processors. DAVE software development kit (SDK) is a free integrated development environment to set up its own apps for DAVE. === Version 3 === Automatic code generation is based on the use of case-oriented, configurable, and tested software (SW) components, called DAVE Apps. They are comparable to executable and configurable application notes that can be downloaded from the web. The environment is based on Eclipse. Ordinary program development using C/C++ is also available. The targets for this development are XMC1xxx and XMC4xxx microcontrollers that use Cortex-M processors. === Previous versions === This version targets 32-bit microcontroller units (MCUs) (Infineon TriCore AUDO family), 16-bit MCUs (C166, XC166, XE166, and XC2000 family), and 8-bit MCUs (XC800 family) from Infineon. After the initial setup, the configuration wizard appears and gives an overview of the hardware peripherals, control units, and modules. The microcontroller application can be created by selecting the desired functions. At this step, module-specific functions must be selected for module initializing and control. Finally, the application source files will be generated by DAVE and embedded in a project in the selected development environment, where the code can still be modified or added to an extant project. == DAVE-related software == Infineon also developed additional software that can be used in conjunction with DAVE for specific microcontroller families or additional hardware: DAVE Bench for XC800 is a platform providing free development tools for Infineon's 8-bit microcontroller family, based on the Open Source Eclipse architecture. DAVE Drive is a GUI-based software tool that allows application developers to create embedded software for the control of brushless synchronous three-phase motors. == Alternative software == The Infineon MCUs are directly supported by several commercial products, depending on the selected MCU target. An embedded programming library for MATLAB exists. As a free alternative to DAVE, the developer can use the Keil Microcontroller Development Kit (MDK) Version 5. Code for the XMX1000 series up to 128 kB can be developed this way without purchasing a license from Keil.

    Read more →
  • GitHub Codespaces

    GitHub Codespaces

    GitHub Codespaces is a cloud-based online integrated development environment developed by GitHub. It allows users to create and manage development environments directly within the browser or through Visual Studio Code desktop. Codespaces is tightly integrated with GitHub repositories and enables on-demand coding, debugging, and testing in a full-featured development container hosted in the cloud. == Features == Instant development environments integrated with GitHub Browser-based and desktop access via Visual Studio Code Configurable Dockerfile or devcontainer.json environments Built-in support for GitHub Copilot, extensions, snippets, and SSH. == Licensing == GitHub Codespaces is proprietary software and available to GitHub users under various subscription plans. Codespaces includes a monthly usage quota for free tier users of 120 hours, and expanded access for GitHub education, Pro, Team, and GitHub Enterprise plans. == GitHub Classroom == GitHub Classroom is an educational tool developed by GitHub to streamline the process of managing programming assignments and coursework. Integrated with GitHub repositories, it allows instructors to distribute starter code, automate grading workflows, and track student progress. GitHub Classroom is widely used in computer science education and supports integration with GitHub Codespaces for cloud-based development environments. == Programming languages supported == == Extensions == Some of the popular extensions include:

    Read more →
  • SEMAT

    SEMAT

    SEMAT (Software Engineering Method and Theory) is an initiative to reshape software engineering such that software engineering qualifies as a rigorous discipline. The initiative was launched in December 2009 by Ivar Jacobson, Bertrand Meyer, and Richard Soley with a call for action statement and a vision statement. The initiative was envisioned as a multi-year effort for bridging the gap between the developer community and the academic community and for creating a community giving value to the whole software community. The work is now structured in four different but strongly related areas: Practice, Education, Theory, and Community. The Practice area primarily addresses practices. The Education area is concerned with all issues related to training for both the developers and the academics including students. The Theory area is primarily addressing the search for a General Theory in Software Engineering. Finally, the Community area works with setting up legal entities, creating websites and community growth. It was expected that the Practice area, the Education area and the Theory area would at some point in time integrate in a way of value to all of them: the Practice area would be a "customer" of the Theory area, and direct the research to useful results for the developer community. The Theory area would give a solid and practical platform for the Practice area. And, the Education area would communicate the results in proper ways. == Practice area == The first step was here to develop a common ground or a kernel including the essence of software engineering – things we always have, always do, always produce when developing software. The second step was envisioned to add value on top of this kernel in the form of a library of practices to be composed to become specific methods, specific for all kinds of reasons such as the preferences of the team using it, kind of software being built, etc. The first step is as of this writing just about to be concluded. The results are a kernel including universal elements for software development – called the Essence Kernel, and a language – called the Essence Language - to describe these elements (and elements built on top of the kernel (practices, methods, and more). Essence, including both the kernel and language, has been published as an OMG standard in beta status in July 2013 and is expected to become a formally adopted standard in early 2014. The second step has just started, and the Practice area will be divided into a number of separate but interconnected tracks: the practice (library track), the tool track are so far identified and work has started or is about to get started. The practice track is currently working on a Users Guide. == Education area == The area focuses on leveraging the work of SEMAT in software engineering education, both within academia and industry. It promotes global education based on a common ground called Essence. The area's target groups are instructors such as university professors and industrial coaches as well as their students and learning practitioners. The goal of the area is to create educational courses and course materials that are internationally viable, identify pedagogical approaches that are appropriate and effective for specific target groups and disseminate experience and lessons learned. The area includes members from a number of universities and institutes worldwide. Most members have already been involved in leveraging aspects of SEMAT in the context of their software engineering courses. They are gathering their resources and starting a common venture towards defining a new generation of SEMAT-powered software engineering curricula. As of 2018, some studies of utilizing Essence in educational settings exist. One example of the use of Essence in university education was a software engineering course carried out in Norwegian University of Science and Technology. A study was conducted by introducing Essence into a project-based software engineering course, with the aim of understanding what difficulties the students faced in using Essence, and whether they considered it to have been useful. The results indicated that Essence could also be useful for novice software engineers by (1) encouraging them to look up and study new practices and methods in order to create their own, (2) encouraging them to adjust their way-of-working reflectively and in a situation-specific manner, (3) helping them structure their way of working. The findings of another study introducing students to Essence through a digital game supported these findings: the students felt that Essence will be useful to them in future, real-world projects, and that they wish to utilize it in them. == Theory area == An important part of SEMAT is that a general theory of software engineering is planned to emerge with significant benefits. A series of workshops held under the title SEMAT Workshop on a General Theory of Software Engineering (GTSE) are a key component in awareness building around general theories. In addition to community awareness building, SEMAT also aims to contribute with a specific general theory of software engineering. This theory should be solidly based on the SEMAT Essence language and kernel, and should support software engineering practitioners' goal-oriented decision making. As argued elsewhere, such support is predicated on the predictive capabilities of the theory. Thus, the SEMAT Essence should be augmented to allow the prediction of critical software engineering phenomena. The GTSE workshop series assists in the development of the SEMAT general software engineering theory by engaging a larger community in the search for, development of, and evaluation of promising theories, which may be used as a base for the SEMAT theory. == Organizational structure == === Main organization === SEMAT is chaired by Sumeet S. Malhotra of Tata Consultancy Services. The CEO of the organization is Ste Nadin of Fujitsu. The Executive Management Committee of SEMAT are Ivar Jacobson, Ste Nadin, Sumeet S. Malhotra, Paul E. McMahon, Michael Goedicke and Cecile Peraire. === Japan Chapter === Japan Chapter was established in April 2013, and it has more than 250 members as of November 2013. Member activities include carrying out seminars about SEMAT, considering utilization of SEMAT Essence for integrating different requirements engineering techniques and body of knowledges (BoKs), and translating articles into Japanese. === Korea Chapter === The chapter was inaugurated with about 50 members in October 2013. Member activities include: 2e Consulting started rewriting their IT service engagement methods using the Essence kernel, and uEngine Solutions started developing a tool to orchestrate Essence-kernel based practices into a project method. Korean government supported KAIST to conduct research in Essence. === Latin American Chapter === Semat Latin American Chapter was created in August 2011 in Medellin (Colombia) by Ivar Jacobson during the Latin American Software Engineering Symposium. This Chapter has 9 Executive Committee members from Colombia, Venezuela, Peru, Brazil, Argentina, Chile, and Mexico, chaired by Dr. Carlos Zapata from Colombia. More than 80 people signed the initial declaration of the Chapter and nowadays the Chapter members are in charge of disseminating the Semat ideas in all Latin America. Chapter members have participated in various Latin American conferences, including the Latin American Conference on Informatics (CLEI), the Ibero American Software Engineering and Knowledge Engineering Journeys (JIISIC), the Colombian Computing Conference (CCC), and the Chilean Computing Meeting (ECC). The Chapter contributed in the submission sent in response to the OMG call for proposals and currently studies didactic strategies for teaching the Semat kernel by games, theoretical studies about some kernel elements, and practical representations of several software development and quality methods by using the Semat kernel. Some of the members also translated the Essence book and some other Semat materials and papers into Spanish. === Russia Chapter === Russian Chapter has about 20 members. A few universities have incorporated SEMAT in their training courses , including Moscow State University, Moscow Institute of Physics and Technology, Higher School of Economics, Moscow State University of Economics, Statistics, and Informatics. The chapter and some commercial companies are carrying out seminars about SEMAT. INCOSE Russian Chapter is working on an extension of SEMAT to systems engineering. EC-leasing is working on an extension of the Kernel for Software Life Cycle. Russian Chapter attended in two conferences: Actual Problems of System and Software Engineering and SECR with SEMAT section and articles. Translation of the Essence book into Russian is in progress. == Practical Applications of SEMAT == Ideas developed by the SEMAT community have been applied by both industry and ac

    Read more →
  • Hint (app)

    Hint (app)

    Hint (hint.app) is an American software platform that provides astrological content, personality assessments, and relationship compatibility tools. The application was launched in 2018 and is based in Claymont, Delaware. The platform has been described in media coverage as part of a broader trend of astrology-based and self-reflection applications, particularly among younger users. As of 2026, the company reports that it has reached more than 25 million users worldwide. == History == Hint was founded in 2018 and is headquartered in Claymont, Delaware. The platform was developed to address a growing demand among Millennials and Gen Z for structured self-reflection tools that deviate from traditional religious or clinical psychological frameworks. The app has become a prominent figure in the "emotional technology" sector, reaching over 25 million global users by 2026. The platform is frequently cited by sociologists and media outlets as a primary driver of the Open-source intelligence trend, where individuals use digital tools to vet and analyze personal relationships in the dating economy. Media coverage has described the platform as part of a broader trend in which digital tools incorporate astrology and symbolic frameworks into wellness and relationship advice. == Reception == Coverage of Hint has appeared alongside reporting on changing attitudes toward dating and relationships, particularly among younger adults. Surveys reported by media outlets have described shifts in dating behavior, including reduced interest in casual relationships and increased reliance on digital tools for emotional reflection and compatibility assessment. Additional reporting has linked the use of astrology apps to broader trends in emotional fatigue and changing relationship expectations. Lifestyle and culture publications have described Hint, as an example of applications that integrate astrology into digital self-reflection and relationship analysis.

    Read more →
  • Zamzar

    Zamzar

    Zamzar is an online file converter and compressor, created by brothers Mike and Chris Whyley in England in 2006. It allows users to convert files online, without downloading a software tool, and supports over 1,200 different conversion types. Since its formation, the service has converted over 510 million files for users from 245 different countries. The service supports the conversion of documents, images, audio, video, e-Books, CAD files and compressed file formats. Users can type in a URL or upload one or more files (if they are all of the same format) from their computer; Zamzar will then convert the file(s) to another user-specified format, such as an Adobe PDF file to a Microsoft Word document. Once conversion is complete, users can immediately download the file from their web browser. Users can also choose to receive an email with a link to download the converted file. In February 2021 Zamzar expanded their tool and announced a new file compression service. The compressor is visually similar to the conversion tool with a drag and drop download feature. As with the converter, users have the option to subscribe for a paid plan if they wish to compress multiple or larger files than the free service permits == File conversion API == in 2015 Zamzar launched a file conversion API, allowing users to integrate file conversion capabilities into their own websites and applications. Sample code is provided to allow users to integrate file conversion capabilities in C#, Java, Node.js, PHP, Python and cURL. Zamzar also maintains a project on GitHub which allows users to perform file conversion from the command line on Linux, MacOS or Windows systems. == Email file conversion == It is also possible to send files for conversion by emailing them to Zamzar. Zamzar launched this capability in 2012, allowing users to email files to dedicated email addresses for the file to be automatically converted to a different format. A link is then emailed back to the end user to allow them to download their converted file. == User privilege levels == Zamzar is currently free to use, but there is a limit of two conversions per hour for files up to 100MB. Users can pay a monthly subscription in order to access preferential features, such as unlimited file conversions, online file management, shorter response and queuing times and other benefits. == Name == Its name comes from Franz Kafka's The Metamorphosis. Its main character is called Gregor Samsa and it is from his surname that Zamzar is derived. The founders of the service considered three other names – Konvertieren, Khamailen and Obrogo – before settling on Zamzar.

    Read more →
  • The Most Dangerous Writing App

    The Most Dangerous Writing App

    The Most Dangerous Writing App is a web application for free writing that combats writer's block by deleting all progress if the user stops typing for five seconds. It is targeted at creative writers who want to write first drafts without worrying about editing or formatting. == Features == The app is designed to "shut down your inner editor and get you into a state of flow", referring to the psychological concept of being in a flow state. Users start a writing session by choosing a time or word limit, and can only save or download their work if they complete the set limit without interruption. An optional "hardcore mode" blurs out everything the user has written so far, making it impossible to edit before finishing the writing session. == History == The Most Dangerous Writing App was created by software engineer Manuel Ebert and was released as free, open source software on February 29, 2016. It was reviewed by Wired, Forbes, Vogue, Huffington Post, The Verge, The Next Web, and others. It has been used in free writing contests and is recommended by NaNoWriMo. In April 2019, The Most Dangerous Writing App was acquired by Squibler, but the original version remains freely accessible.

    Read more →
  • Twproject

    Twproject

    Twproject (say: T W Project) is a web-based project and groupware management tool created by Open Lab, an Italian software house founded in 2001. It won the 17th Jolt Productivity Award in 2007 in the project management category. In March 2019 it becomes property of Twproject company. It has widespread use in universities as a teaching tool in project management courses. It is used by Oracle Corporation, Prada, Calzedonia, General Electric and many other companies from corporations to small start-ups. == History == April 2001 - The idea of Teamwork came to Open-Lab founders from a need to overcome the PM tools used at that time. It was built in Microsoft ASP and Adobe Flash November 2002 - Open-Lab decide to move from Flash to HTML and from ASP to Java-JSP. Teamwork 2 development is started. June 2004 - Teamwork 2 released, using top open-source technologies like Hibernate, jBlooming, dynamic CSS, Ajax 7 January 2005 - Teamwork goes open source, under LGPL license; remains such until June 2006 (18 months): it is a hit application on SourceForge, with 38.000 downloads, covered by greeting but starving April 2005 - Open-Lab takes the decision to change commercial strategy to finance development of Teamwork version 3 6 June 2006 - Teamwork 3 is finally out (15 months development). New interface, many new features, agile support and much more 27 March 2007 - Teamwork wins the 2007 JOLT Productivity Awards for project management category July 2007 - Teamwork 4 development started: new interface, extended use of new HTML capabilities, JS-oriented interface, start using jQuery February 2009 - Teamwork 4.0 is out February 2010 - Teamwork 4.4: public project pages, Chinese interface. jQuery is getting more space in Teamwork December 2010 - Teamwork 4.6: released Mobile module available for iPhone, Android, BlackBerry. Intensive usage of jQuery June 2011 - Teamwork 4.7: released Issue Kanban / Organizer January 2012 - Teamwork 5.0 development started. Lighter interface, extensive usage of dynamic pages, easier installer and first time approach. Learning curve highly reduced. A jQuery Gantt editor included and released free for the community July 2012 - Teamwork 5 released and also the free online Gantt editor November 2012 - Teamwork 5.1 with new trees and improved model for staffing March 2013 - Teamwork 5.2 with stronger support for customizations and Japanese interface. April 2014 - Teamwork has changed its name in Twproject because the domain teamwork.com has been purchased by Teamwork. April 2013 - Twproject 5.4 with a redesigned more powerful Gantt chart. August 2015 - Twproject 5 finale release. September 2015 - Twproject 6 with a completely redesigned user interface. March 2019 - A new company Twproject srl has been spun off. September 2021 - Twproject 7 has been released introducing WBS based management and workload management. == Features == Project & task management (with Microsoft Project import/export), and JSON format Gantt editor. Uses jQuery Gantt components Time tracking. Several entry points: dashboard, weekly view, issues, start/stop buttons Resource planning with weekly/monthly view, work load overview, unavailability from agenda Issue tracking & planning(with Kanban), e-mail integration, task dedicated inboxes Dashboard configuration, with customizable portlets and layout Message boards Scrum module Meeting and minute management, attached documents Agenda (Integrates with iCal, Microsoft Outlook, Microsoft Entourage, and Google Calendar) Document management, remote file systems link with NTFS, FTP, SVN, S3 (Dropbox, Google drive) Mobile application for iPhone, iPad, Android, Blackberry, Windows phone == Integration == A complete JSON API is available for integrations. The applications runs in Java JDK 8+ on the Hibernate object/relational mapping. The standard distribution uses Apache Tomcat 9, but can run on any J2EE application server. Twproject is tested on these DB servers: MySQL, Oracle, SQL Server, PostgreSql, HSQLDB, but as uses Hibernate can run on many others. There is simple graphical step-by-step installer for Windows, Mac, Linux, .zip/.tar.gz/.rpm packages.

    Read more →
  • Anti-Grain Geometry

    Anti-Grain Geometry

    Anti-Grain Geometry (AGG) is a 2D rendering graphics library written in C++. It features anti-aliasing and sub-pixel resolution. It is not a graphics library, per se, but rather a framework to build a graphics library upon. The library is operating system independent and renders to an abstract memory object. It comes with examples interfaced to the X Window System, Microsoft Windows, Mac OS X, AmigaOS, BeOS, SDL. The examples also include an SVG viewer. The design of AGG uses C++ templates only at a very high level, rather than extensively, to achieve the flexibility to plug custom classes into the rendering pipeline, without requiring a rigid class hierarchy, and allows the compiler to inline many of the method calls for high performance. For a library of its complexity, it is remarkably lightweight: it has no dependencies above the standard C++ libraries and it avoids the C++ STL in the implementation of the basic algorithms. The implicit interfaces are not well documented, however, and this can make the learning process quite cumbersome. While AGG version 2.5 is licensed under the GNU General Public License, version 2 or greater, AGG version 2.4 is still available under the 3-clause BSD license and is virtually the same as version 2.5. == History == Active development of the AGG codebase stalled in 2006, around the time of the v2.5 release, due to shifting priorities of its main developer and maintainer Maxim Shemanarev. M. Shemanarev remained active in the community until his sudden death in 2013. Development has continued on a fork of the more liberally licensed v2.4 on SourceForge.net. == Usage == The Haiku operating system uses AGG in its windowing system. It is one of the renderers available for use in GNU's Gnash Flash player. Graphical version of Rebol language interpreter is using AGG for scalable vector graphics DRAW dialect. Hilti uses it in some of their rebar detection tools, like the PS 1000. Matplotlib uses AGG as its canonical renderer for interactive user interfaces. fpGUI Toolkit has an optional AggPas back-end rendering engine. Work is being done to make AggPas the default or sole rendering engine for fpGUI. Mapnik, the toolkit that renders the maps on the OpenStreetMap website, uses AGG for all its bitmap map rendering by default. HTTPhotos uses AGG to scale photos. Pdfium, the PDF rendering engine used by Google Chrome makes use of AGG, although work is progressing to replace this with Skia Graphics Engine. Graphics Mill, the .NET imaging SDK uses AGG as its drawing engine. Image-Line FL Studio, a digital audio workstation, since version 10.8 released on September 30, 2012, uses AGG for drawing. Native Instruments's Supercharger and Supercharger GT compressors use AGG for its user interface. == Author == The main author of the library was Maxim Shemanarev (Russian: Максим Шеманарёв). On November 26, 2013 Shemanarev (born June 15, 1966, Nizhny Novgorod, Russia) was reported dead at the age of 47 at his home in Columbia, Maryland (US). He died suddenly, allegedly from an epileptic seizure that he had suffered for a while. He was a graduate from Nizhny Novgorod State Technical University. Little is known about his personal life. It's known though that he was divorced and his mother was alive at the time of his death. He used to love skiing, snowboarding (in Colorado), and inline skating. He was praised by his friends for his intelligent programming skills.

    Read more →
  • Color moments

    Color moments

    Color moments are measures that characterise color distribution in an image in the same way that central moments uniquely describe a probability distribution. Color moments are mainly used for color indexing purposes as features in image retrieval applications in order to compare how similar two images are based on color. Usually one image is compared to a database of digital images with pre-computed features in order to find and retrieve a similar Image. Each comparison between images results in a similarity score, and the lower this score is the more identical the two images are supposed to be. == Overview == Color moments are scaling and rotation invariant. It is usually the case that only the first three color moments are used as features in image retrieval applications as most of the color distribution information is contained in the low-order moments. Since color moments encode both shape and color information they are a good feature to use under changing lighting conditions, but they cannot handle occlusion very successfully. Color moments can be computed for any color model. Three color moments are computed per channel (e.g. 9 moments if the color model is RGB and 12 moments if the color model is CMYK). Computing color moments is done in the same way as computing moments of a probability distribution. === Mean === The first color moment can be interpreted as the average color in the image, and it can be calculated by using the following formula E i = ∑ j = 1 N 1 N p i j {\displaystyle E_{i}=\textstyle \sum _{j=1}^{N}{\frac {1}{N}}p_{ij}} where N is the number of pixels in the image and p i j {\displaystyle p_{ij}} is the value of the j-th pixel of the image at the i-th color channel. === Standard Deviation === The second color moment is the standard deviation, which is obtained by taking the square root of the variance of the color distribution. σ i = ( 1 N ∑ j = 1 N ( p i j − E i ) 2 ) {\displaystyle \sigma _{i}={\sqrt {({\frac {1}{N}}\textstyle \sum _{j=1}^{N}(p_{ij}-E_{i})^{2})}}} where E i {\displaystyle E_{i}} is the mean value, or first color moment, for the i-th color channel of the image. === Skewness === The third color moment is the skewness. It measures how asymmetric the color distribution is, and thus it gives information about the shape of the color distribution. Skewness can be computed with the following formula: s i = ( 1 N ∑ j = 1 N ( p i j − E i ) 3 ) 3 σ i {\displaystyle s_{i}={\frac {\sqrt[{3}]{\left({\frac {1}{N}}\textstyle \sum _{j=1}^{N}(p_{ij}-E_{i})^{3}\right)}}{\sigma _{i}}}} === Kurtosis === Kurtosis is the fourth color moment, and, similarly to skewness, it provides information about the shape of the color distribution. More specifically, kurtosis is a measure of how extreme the tails are in comparison to the normal distribution. === Higher-order color moments === Higher-order color moments are usually not part of the color moments feature set in image retrieval tasks as they require more data in order to obtain a good estimate of their value, and also the lower-order moments generally provide enough information. == Applications == Color moments have significant applications in image retrieval. They can be used in order to compare how similar two images are. This is a relatively new approach to color indexing. The greatest advantage of using color moments comes from the fact that there is no need to store the complete color distribution. This greatly speeds up image retrieval since there are less features to compare. In addition, the first three color moments have the same units, which allows for comparison between them. === Color indexing === Color indexing is the main application of color moments. Images can be indexed, and the index will contain the computed color moments. Then, if someone has a particular image and wants to find similar images in the database, the color moments of the image of interest will also be computed. After that the following function will be used in order to compute a similarity score between the image of interest and all the images in the database: d m o m ( H , I ) = ∑ i = 1 r w i 1 | E i 1 − E i 2 | + w i 2 | σ i 1 − σ i 2 | + w i 3 | s i 1 − s i 2 | {\displaystyle d_{mom}(H,I)=\textstyle \sum _{i=1}^{r}w_{i1}|E_{i}^{1}-E_{i}^{2}|+w_{i2}|\sigma _{i}^{1}-\sigma _{i}^{2}|+w_{i3}|s_{i}^{1}-s_{i}^{2}|} where: H and I are the color distributions of the two images that are being compared i is the channel index and r is the total number of channels E i 1 {\displaystyle E_{i}^{1}} and E i 2 {\displaystyle E_{i}^{2}} are the first order moments computed for the image distributions. σ i 1 {\displaystyle \sigma _{i}^{1}} and σ i 2 {\displaystyle \sigma _{i}^{2}} are the second order moments computed for the image distributions. s_i^1 and s_i^2 are the third order moments computed for the image distributions. w i 1 {\displaystyle w_{i1}} , w i 2 {\displaystyle w_{i2}} , and w i 3 {\displaystyle w_{i3}} are weights, specified by the user, for each of the three color moments used. Finally, the images in the database will be ranked according to the computed similarity score with the image of interest, and the database images with the lowest d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} value should be retrieved. "A retrieval based on d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} may produce false positives because the index contains no information about the correlation between the color channels". == Example == A simple and concise example of the use of color moments for image retrieval tasks is illustrated in. Consider having several test images in a database and a "New Image". The goal is to retrieve images from the database that are similar to the "New Image". The first three color moments are used as features. There are several steps in this computation. Image preprocessing (Optional) - The image preprocessing step of the computation process is optional. For example, in this step all images could be modified to be the same size (in terms of pixels). However, since color moments are invariant to scaling, it is not necessary to make all images the same width and height. Computing the features - Use the color moments formulae in order to compute the first three moments for each of the color channels in the image. For example, if the HSV color space is used, this means that for each of the images, 9 features in total will be computed (the first three order moments for the Hue, Saturation, and Value channels). Calculating the similarity score - After computing the color moments the weights for each of the moments in the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} function should be determined by the user. The weights have to be adjusted each time in accordance with the application or condition and quality of the images. Following that the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} function is used to calculate a similarity score for the "New Image" and each of the images in the database. Ranking and image retrieval - From the previous step the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} values were obtained. Now a comparison of these values can be made in order to decide which of the images in the database are more similar to the "New Image", and thus rank the database images accordingly. The smaller the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} value is the more similar the two color distributions are supposed to be. Finally, some of the top ranked images (the ones with the smallest d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} value) from the database are retrieved.

    Read more →
  • Software durability

    Software durability

    In software engineering, software durability means the solution ability of serviceability of software and to meet user's needs for a relatively long time. Software durability is important for user's satisfaction. For a software security to be durable, it must allow an organization to adjust the software to business needs that are constantly evolving, often in impulsive ways. Durability of software depends on four characteristics mainly; i.e. software trustworthiness, Human Trust for Serviceability, software dependability and software usability.

    Read more →