AI Code Vulnerability Scanner

AI Code Vulnerability Scanner — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Butler in a Box

Butler in a Box was an early voice-controlled home automation device developed in 1983 by magician Gus Searcy and programmer Franz Kavan. The device allowed users to control various home electronics, such as lights and phones, using voice commands. It predated modern smart speakers and virtual assistants by several decades. == History == The idea for the Butler in a Box originated in 1983 when Searcy was asked by friends why he couldn't simply command lights to turn on and off if he could pull rabbits out of hats, given his background as a professional magician. Searcy partnered with former IBM programmer Kavan to develop the device, with their first prototype being named "Sidney". The Butler in a Box combined remote control technology with voice recognition to enable control of home devices. However, it faced challenges due to the technological limitations of the era and its high price point of nearly $1,500 (equivalent to around $3,700 in 2021). == Features and functionality == Users could activate the Butler in a Box by speaking a wake word, typically a traditional butler name, and the device would address the user as "boss". It was capable of performing tasks such as: Turning lights on and off, controlling individual zones if lights were connected to remote control modules Making and receiving phone calls Setting timers Pairing with sensors to function as a security alarm system However, the device required extensive voice training for each user, a time-consuming process compared to modern voice recognition. Additionally, settings and trained commands would be lost if power was out for over 3 hours due to the volatile memory technology used at the time. == Reception and legacy == While innovative for its time, the Butler in a Box did not achieve widespread commercial success due to its high price and the technical limitations of the 1980s. Nevertheless, it served as an important early step in the development of home automation and showcased the potential for voice-controlled technology to enhance accessibility and convenience in the home. Decades later, products like Amazon Alexa, Google Home, and Apple's Siri would make voice-controlled smart home devices commonplace and affordable, building on the groundwork laid by early attempts like the Butler in a Box.
Read more →
Cyber-Duck

Cyber-Duck is a digital transformation agency founded in 2005 and based in Elstree, United Kingdom. The company specialises in user experience (UX), software development and digital optimisation. The company employs over 90 staff in the UK and Europe. It works with clients from the financial, pharmaceutical, sport, motoring and security sectors, among others. These include the Bank of England, Cancer Research UK, GOV.UK Verify partner CitizenSafe, The Commonwealth of Nations and Sport England. == History == Cyber-Duck was founded in 2005 by Danny Bluestone in his flat in Mill Hill, United Kingdom. After a few months, the firm moved into its first office in Borehamwood. Projects with Ogilvy, London Creative and Wisteria followed before Cyber-Duck moved to offices in Devonshire House, Borehamwood. In 2010, the firm was commissioned to develop a website for the European Commission in the UK. In 2011, the company moved to a self-contained premises in Elstree, Hertfordshire. Shortly afterward, Cyber-Duck was listed on the Deloitte Technology Fast 500 EMEA in recognition of its substantial revenue growth over the previous five years. As the company grew, its expertise also broadened. This resulted in guest spots on several television shows. Cyber-Duck was featured in an episode of the Gadget Show in 2011, and Chief Production Officer Matt Gibson appeared on BBC Watchdog in 2013 to assist in researching websites and their checkout processes. The firm continued to attract business from companies in London, so the decision was made to open a new office in central London. The Farringdon office opened in 2015, and was followed by a rebrand. In 2016, Cyber-Duck went on to work with the Bank of England. Ahead of the launch of the new polymer £5 note, featuring Winston Churchill, the company was tasked with creating a user-friendly website to showcase the new banknote and promote public awareness. The success of the campaign led to further commissions, including 2017's website the New Ten and a redesign of the Bank of England's main website. The firm underwent significant growth in 2020, beginning working partnerships with Sport England and the College of Policing. During this time they also launched DevOps as a new service. In 2022, the Farringdon office closed and was relocated to a new office space in Holborn. The Laravel, Drupal and DevOps teams expanded, and Cyber-Duck became the lead Digital Agency for Worcester, Bosch Group. Several members of the team appeared on The Digital Society on Sky UK. == Awards and accreditations == Cyber-Duck is known for its focus on process accreditation as a driver of creativity. In 2011, the company obtained its first ISO 9241 accreditation in Human Centred Design for interactive systems. Two years later, Cyber-Duck obtained a further certification, the ISO 9001 for Quality Management Systems. It acquired another certification in 2016 with the ISO 27001 – the focus of this accreditation was Information Security Management. In 2022, Cyber-Duck gained the ISO 14001 certification in Environmental Management. Cyber-Duck's digital products have won numerous Wirehive 100, BIMA and Webby awards. Notably, the company's UX Companion, a free iOS and Android app that is a glossary of UX theories, featured in Usability Geek and Smashing Magazine. In 2021 they were awarded as one of the UK's 100 Best Small Companies to work for, and BIMA10 shortlisted for their work with Sport England and This Girl Can.
Read more →
Supercomputer operating system

A supercomputer operating system is an operating system intended for supercomputers. Since the end of the 20th century, supercomputer operating systems have undergone major transformations, as fundamental changes have occurred in supercomputer architecture. While early operating systems were custom tailored to each supercomputer to gain speed, the trend has been moving away from in-house operating systems and toward some form of Linux, with it running all the supercomputers on the TOP500 list in November 2017. In 2021, top 10 computers run for instance Red Hat Enterprise Linux (RHEL), or some variant of it or other Linux distribution e.g. Ubuntu. Given that modern massively parallel supercomputers typically separate computations from other services by using multiple types of nodes, they usually run different operating systems on different nodes, e.g., using a small and efficient lightweight kernel such as Compute Node Kernel (CNK) or Compute Node Linux (CNL) on compute nodes, but a larger system such as a Linux distribution on server and input/output (I/O) nodes. While in a traditional multi-user computer system job scheduling is in effect a tasking problem for processing and peripheral resources, in a massively parallel system, the job management system needs to manage the allocation of both computational and communication resources, as well as gracefully dealing with inevitable hardware failures when tens of thousands of processors are present. Although most modern supercomputers use the Linux operating system, each manufacturer has made its own specific changes to the Linux distribution they use, and no industry standard exists, partly because the differences in hardware architectures require changes to optimize the operating system to each hardware design. == Context and overview == In the early days of supercomputing, the basic architectural concepts were evolving rapidly, and system software had to follow hardware innovations that usually took rapid turns. In the early systems, operating systems were custom tailored to each supercomputer to gain speed, yet in the rush to develop them, serious software quality challenges surfaced and in many cases the cost and complexity of system software development became as much an issue as that of hardware. In the 1980s the cost for software development at Cray came to equal what they spent on hardware and that trend was partly responsible for a move away from the in-house operating systems to the adaptation of generic software. The first wave in operating system changes came in the mid-1980s, as vendor specific operating systems were abandoned in favor of Unix. Despite early skepticism, this transition proved successful. By the early 1990s, major changes were occurring in supercomputing system software. By this time, the growing use of Unix had begun to change the way system software was viewed. The use of a high level language (C) to implement the operating system, and the reliance on standardized interfaces was in contrast to the assembly language oriented approaches of the past. As hardware vendors adapted Unix to their systems, new and useful features were added to Unix, e.g., fast file systems and tunable process schedulers. However, all the companies that adapted Unix made unique changes to it, rather than collaborating on an industry standard to create "Unix for supercomputers". This was partly because differences in their architectures required these changes to optimize Unix to each architecture. As general purpose operating systems became stable, supercomputers began to borrow and adapt critical system code from them, and relied on the rich set of secondary functions that came with them. However, at the same time the size of the code for general purpose operating systems was growing rapidly. By the time Unix-based code had reached 500,000 lines long, its maintenance and use was a challenge. This resulted in the move to use microkernels which used a minimal set of the operating system functions. Systems such as Mach at Carnegie Mellon University and ChorusOS at INRIA were examples of early microkernels. The separation of the operating system into separate components became necessary as supercomputers developed different types of nodes, e.g., compute nodes versus I/O nodes. Thus modern supercomputers usually run different operating systems on different nodes, e.g., using a small and efficient lightweight kernel such as CNK or CNL on compute nodes, but a larger system such as a Linux-derivative on server and I/O nodes. == Early systems == The CDC 6600, generally considered the first supercomputer in the world, ran the Chippewa Operating System, which was then deployed on various other CDC 6000 series computers. The Chippewa was a rather simple job control oriented system derived from the earlier CDC 3000, but it influenced the later KRONOS and SCOPE systems. The first Cray-1 was delivered to the Los Alamos Lab with no operating system, or any other software. Los Alamos developed the application software for it, and the operating system. The main timesharing system for the Cray 1, the Cray Time Sharing System (CTSS), was then developed at the Livermore Labs as a direct descendant of the Livermore Time Sharing System (LTSS) for the CDC 6600 operating system from twenty years earlier. In developing supercomputers, rising software costs soon became dominant, as evidenced by the 1980s cost for software development at Cray growing to equal their cost for hardware. That trend was partly responsible for a move away from the in-house Cray Operating System to UNICOS system based on Unix. In 1985, the Cray-2 was the first system to ship with the UNICOS operating system. Around the same time, the EOS operating system was developed by ETA Systems for use in their ETA10 supercomputers. Written in Cybil, a Pascal-like language from Control Data Corporation, EOS highlighted the stability problems in developing stable operating systems for supercomputers and eventually a Unix-like system was offered on the same machine. The lessons learned from developing ETA system software included the high level of risk associated with developing a new supercomputer operating system, and the advantages of using Unix with its large extant base of system software libraries. By the middle 1990s, despite the extant investment in older operating systems, the trend was toward the use of Unix-based systems, which also facilitated the use of interactive graphical user interfaces (GUIs) for scientific computing across multiple platforms. The move toward a commodity OS had opponents, who cited the fast pace and focus of Linux development as a major obstacle against adoption. As one author wrote "Linux will likely catch up, but we have large-scale systems now". Nevertheless, that trend continued to gain momentum and by 2005, virtually all supercomputers used some Unix-like OS. These variants of Unix included IBM AIX, the open source Linux system, and other adaptations such as UNICOS from Cray. By the end of the 20th century, Linux was estimated to command the highest share of the supercomputing pie. == Modern approaches == The IBM Blue Gene supercomputer uses the CNK operating system on the compute nodes, but uses a modified Linux-based kernel called I/O Node Kernel (INK) on the I/O nodes. CNK is a lightweight kernel that runs on each node and supports a single application running for a single user on that node. For the sake of efficient operation, the design of CNK was kept simple and minimal, with physical memory being statically mapped and the CNK neither needing nor providing scheduling or context switching. CNK does not even implement file I/O on the compute node, but delegates that to dedicated I/O nodes. However, given that on the Blue Gene multiple compute nodes share a single I/O node, the I/O node operating system does require multi-tasking, hence the selection of the Linux-based operating system. While in traditional multi-user computer systems and early supercomputers, job scheduling was in effect a task scheduling problem for processing and peripheral resources, in a massively parallel system, the job management system needs to manage the allocation of both computational and communication resources. It is essential to tune task scheduling, and the operating system, in different configurations of a supercomputer. A typical parallel job scheduler has a master scheduler which instructs some number of slave schedulers to launch, monitor, and control parallel jobs, and periodically receives reports from them about the status of job progress. Some, but not all supercomputer schedulers attempt to maintain locality of job execution. The PBS Pro scheduler used on the Cray XT3 and Cray XT4 systems does not attempt to optimize locality on its three-dimensional torus interconnect, but simply uses the first available processor. On the other hand, IBM's scheduler on the Blue Gene supercomputers aims to exploit locality a
Read more →
WEA Manufacturing

WEA Manufacturing was the record, tape, and compact disc manufacturing arm of WEA International Inc. from 1978 to 2003, when it was sold and merged into Cinram International, a previous competitor. The last owner when the plant closed was Technicolor. == History == WEA Manufacturing Inc. was created in 1978–1979 when Warner Communications Inc. purchased two of its longtime suppliers: the record pressing plants Specialty Records Corporation (Olyphant, Pennsylvania) and Allied Record Company (Los Angeles). The company was headquartered in Olyphant, where the original plant was replaced in late 1981 by a new facility which retained the name Specialty Records Corporation. The Specialty Records Corporation name was dropped in 1996 in favor of WEA Manufacturing. The company invested in CD manufacturing in 1986, matching a $247,000 contribution by economic development corporation Ben Franklin Technology Partners to develop and implement new processes of manufacturing audio CDs and CD-ROMs. BFTP assembled a team of experts in physics, electrical engineering, and thin film technology from the University of Scranton and Lehigh University to carry out the research and development. The Olyphant plant and another plant in Alsdorf, Germany, were expanded to support CD pressing that year, with the Olyphant facility's production commencing first in September 1986. WEA Manufacturing grew to become one of the largest manufacturers of recorded media in the world. The company began manufacturing Laserdiscs in July 1991. The company's DVD division, Warner Advanced Media Operations (WAMO), helped design the high-density format used in DVDs, and manufactured some of the first DVDs in the late 1990s. The company was sold to Cinram International in October 2003 and no longer exists under the name WEA Manufacturing, but the Olyphant plant continued to operate under its new ownership. In 2005, the company was Lackawanna County's largest employer, with over 2,300 people working at the Olyphant plant. Cinram closed the former Allied plant in 2006, while Technicolor (which purchased Cinram's assets in 2015) closed the Olyphant plant in 2018. == Patents == WEA Manufacturing held U.S. patents related to compact disc manufacture: Print scanner, (1993). Interference of converging spherical waves with application to the design of light-readable information-recording media and systems for reading such media, (2004). Method of manufacturing a composite disc structure and apparatus for performing the method, (2005). Methods and apparatus for reducing the shrinkage of an optical disc's clamp area and the resulting optical disc, (2005). == Litigation == In 1990, WEA Manufacturing was sued by a Canadian firm, Optical Recording Co. (ORC), for alleged infringement of two 1971 patents related to glass mastering equipment which was used by Time Warner and WEA Manufacturing in the manufacture of approximately 450 million CDs. ORC contended that unlike five other major CD manufacturers in the U.S., Time Warner had refused to license the technology from ORC. In 1992, a jury assessed damages of 6 cents per disc, plus $4–5 million in interest.
Read more →
Thai QR Payment

Thai QR Payment or PromptPay (พร้อมเพย์) is a real-time payment system in Thailand that allows money transfers through digital channels using identifiers linked to a bank account, including a mobile phone number, citizen identification number, tax identification number or bank account number. The system was introduced in 2016 as part of Thailand's national e-payment infrastructure and was developed under the National e-Payment Master Plan, a government programme intended to expand digital payment infrastructure and reduce the use of cash in everyday transactions. It is owned by National ITMX ltd and Bank of Thailand and developed by Vocalink, a group by Mastercard == History == PromptPay (originally AnyID) is one of the National e-Payment projects and policies by Thailand, to regulate and standardize electronic payments to follow the technologies with internet and smartphones that is expanding and bringing technology into Finance and Commerce. By 22 December 2015, The First Prayut cabinet have approved the project as a national infastructure PromptPay has also been used in cross-border payment linkages with other real-time payment systems in Southeast Asia. In April 2021, the Monetary Authority of Singapore and the Bank of Thailand launched a linkage between Singapore's PayNow and Thailand's PromptPay, allowing customers of participating banks to send money between the two countries using a mobile phone number. In June 2021, the central banks of Thailand and Malaysia launched a cross-border QR payment linkage between PromptPay and Malaysia's DuitNow system. == Services == PromptPay's Services have included Encrypted Transactions and Payment between Two Individuals (C2C) Government Infrastructure Payment Tax Returns Individual PromptPay e-Wallet Thai QR Payment Pay Alert e-Donation Cross Border QR Payment
Read more →
Magnetoquasistatic field

A magnetoquasistatic field is a class of electromagnetic field in which a slowly oscillating magnetic field is dominant. A magnetoquasistatic field is typically generated by low-frequency induction from a magnetic dipole or a current loop. The magnetic near-field of such an emitter behaves differently from the more commonly used far-field electromagnetic radiation. At low frequencies the rate of change of the instantaneous field strength with each cycle is relatively slow, giving rise to the name "magneto-quasistatic". The near field or quasistatic region typically extends no more than a wavelength from the antenna, and within this region the electric and magnetic fields are approximately decoupled. Weakly conducting non-magnetic bodies, including the human body and many mineral rocks, are effectively transparent to magnetoquasistatic fields, allowing for the transmission and reception of signals through such obstacles. Also, long-wavelength (i.e. low-frequency) signals are better able to propagate round corners than shorter-wave signals. Communication therefore need not be line-of-sight. The communication range of such signals depends on both the wavelength and the electromagnetic properties of the intervening medium at the chosen frequency, and is typically limited to a few tens of meters. == Physical principles == The laws of primary interest are Ampère's circuital law (with the displacement current density neglected) and the magnetic flux continuity law. These laws have associated with them continuity conditions at interfaces. In the absence of magnetizable materials, these laws determine the magnetic field intensity H given its source, the current density J. H is not everywhere irrotational. However, it is solenoidal everywhere. == Equipment design == A typical antenna comprises a 50-turn coil around a polyoxymethylene tube with diameter 16.5 cm, driven by a class E oscillator circuit. Such a device is readily portable when powered by batteries. Similarly, a typical receiver consist of an active receiving loop with diameter of one meter, an ultra-low-noise amplifier, and a band-pass filter. In operation the oscillator drives current through the transmitting loop to create an oscillating magnetic field. This field induces a voltage in the receiving loop, which is then amplified. Because the quasistatic region is defined within one wavelength of the electromagnetic source, emitters are limited to a frequency range between about 1 kHz and 1 MHz. Reducing the oscillating frequency increases the wavelength and hence the range of the quasistatic region, but reduces the induced voltage in the receiving loops which worsens the signal-to-noise ratio. In experiments carried out by the Carnegie Institute of Technology, the maximum range reported by was 50 meters. == Applications == === Resonant inductive coupling === In resonant coupling, the source and receiver are tuned to resonate at the same frequency and are given similar impedances. This allows power as well as information to flow from the source to the receiver. Such coupling via the magnetoquasistatic field is called resonant inductive coupling and can be used for wireless energy transfer. Applications include induction cooking, induction charging of batteries and some kinds of RFID tag. === Communications === Conventional electromagnetic communication signals cannot pass through the ground. Most mineral rock is neither electrically conducting nor magnetic, allowing magnetic fields to penetrate. Magnetoquasistatic systems have been successfully used for underground wireless communication, both surface-to-underground and between underground parties. At extremely low frequencies, below about 1 kHz, the wavelength is long enough for long-distance communication, although at a slow data rate. Such systems have been installed in submarines, with the local antenna comprising a wire up to several kilometers in length and trailed behind the vessel when at or near the surface. === Position and orientation tracking === Wireless position tracking is being increasingly used in applications such as navigation, security, and asset tracking. Conventional position tracking devices use high frequencies or microwaves, including global positioning systems (GPS), ultra-wide band (UWB) systems, and radio frequency identification systems (RFID), but these systems can easily be blocked by obstacles in their path. Magnetoquasistatic positioning takes advantage of the fact that the fields are largely undisturbed when in the presence of human beings and physical structures, and can be used for both position and orientation tracking for ranges up to 50 meters. To accurately determine the orientation and position of a dipole/emitter, allowance must be made not only for the field pattern generated by the emitter, but also for the eddy-currents they induce in the earth, which create secondary fields detectable by the receivers. By using complex image theory to correct this field generation from earth, and by using frequencies on the order of a few hundred kilohertz to obtain the required signal-to-noise ratio (SNR), it is possible to analyze the position of the dipole through azimuthal orientation, θ {\displaystyle \theta } , and inclination orientation, ϕ {\displaystyle \phi } . A Disney research team has used this technology to effectively determine the position and orientation of an American football, something not traceable through conventional wave propagation techniques due to human body obstruction. They inserted an oscillator-driven coil, around the diameter of the center of the ball, to generate the magnetoquasistatic field. The signal was able to pass undisturbed through multiple players.
Read more →
Mediated intercultural communication

Mediated intercultural communication is digital communication between people of different cultural backgrounds. Media include social networks, blogs and conferencing services. Digital communication is distinct from traditional media, creating new avenues for intercultural communication. User take online classes; post, consume and comment on others content; and play multi-player video games. This creates spaces to form virtual communities that can ease communication across boundaries of space, time and culture. New media technologies can change culture in positive ways or become a tool of repression. == History == Intercultural communication is as ancient as human movement in search of food sources. The systematic study of intercultural communication began with Edward Hall's labor at the Foreign Service Institute, and the publication of his The Silent Language (1959). Later research, primarily focused on face-to-face communication in various areas such as interpersonal, group, and organizational and cultural identity. International and development media have been studied under the umbrella of international communication. Media imperialism, cultural imperialism and dependency theories inform this research. Mediated intercultural communication examines the bidirectional relationships between media and intercultural communication.
Read more →
Account verification

Account verification is the process of verifying that a new or existing account is owned and operated by a specified real individual or organization. A number of websites, for example social media websites, offer account verification services. Verified accounts are often visually distinguished by check mark icons or badges next to the names of individuals or organizations. Account verification can enhance the quality of online services, mitigating sockpuppetry, bots, trolling, spam, vandalism, fake news, disinformation and election interference. == History == Account verification was introduced by Twitter in June 2009, initially as a feature for public figures and accounts of interest, individuals in "music, acting, fashion, government, politics, religion, journalism, media, sports, business and other key interest areas". A similar verification system was adopted by Google+ in 2011, Facebook page in October 2015 (Available in United States, Canada, United Kingdom, Australia and New Zealand) Facebook profile and Facebook page in 2018 (Available in Worldwide) Instagram in 2014, and Pinterest in 2015. On YouTube, users are able to submit a request for a verification badge once they obtain 100,000 or more subscribers. It also has an "official artist" badge for musicians and bands. In July 2016, Twitter announced that, beyond public figures, any individual would be able to apply for account verification. This was temporarily suspended in February 2018, following a backlash over the verification of one of the organisers of the far-right Unite the Right rally due to a perception that verification conveys "credibility" or "importance". In March 2018, during a live-stream on Periscope, Jack Dorsey, co-founder and CEO of Twitter, discussed the idea of allowing any individual to get a verified account. Twitter reopened account verification applications in May 2021 after revamping their account verification criteria. This time offering notability criteria for the account categories of government, companies, brands, and organizations, news organizations and journalists, entertainment, sports and activists, organizers, and other influential individuals. Instagram began allowing users to request verification in August 2018. In April 2018, Mark Zuckerberg, co-founder and CEO of Facebook, announced that purchasers of political or issue-based advertisements would be required to verify their identities and locations. He also indicated that Facebook would require individuals who manage large pages to be verified. In May 2018, Kent Walker, senior vice president of Google, announced that, in the United States, purchasers of political-leaning advertisements would need to verify their identities. In November 2022, Elon Musk included a blue verification check mark with a paid Twitter Blue monthly membership. Prior to Musk's acquisition of Twitter, Twitter offered this check mark at no charge to confirmed high profile users. On December 19, 2022, Twitter introduced two new check mark colors: gold for accounts from official businesses and organizations, and grey for accounts from governments or multilateral organizations. The type of check mark can be confirmed by visiting the profile page, then clicking or tapping on the check mark. == Techniques == === Identity verification services === Identity verification services are third-party solutions which can be used to ensure that a person provides information which is associated with the identity of a real person. Such services may verify the authenticity of identity documents such as drivers licenses or passports, called documentary verification, or may verify identity information against authoritative sources such as credit bureaus or government data, called nondocumentary verification. === Identity documents verification === The uploading of scanned or photographed identity documents is a practice in use, for example, at Facebook. According to Facebook, there are two reasons that a person would be asked to send a scan of or photograph of an ID to Facebook: to show account ownership and to confirm their name. In January 2018, Facebook purchased Confirm.io, a startup that was advancing technologies to verify the authenticity of identification documentation. === Biometric verification === === Behavioral verification === Behavioral verification is the computer-aided and automated detection and analysis of behaviors and patterns of behavior to verify accounts. Behaviors to detect include those of sockpuppets, bots, cyborgs, trolls, spammers, vandals, and sources and spreaders of fake news, disinformation and election interference. Behavioral verification processes can flag accounts as suspicious, exclude accounts from suspicion, or offer corroborating evidence for processes of account verification. === Bank account verification === Identity verification is required to establish bank accounts and other financial accounts in many jurisdictions. Verifying identity in the financial sector is often required by regulation such as Know Your Customer or Customer Identification Program. Accordingly, bank accounts can be of use as corroborating evidence when performing account verification. Bank account information can be provided when creating or verifying an account or when making a purchase. === Postal address verification === Postal address information can be provided when creating or verifying an account or when making and subsequently shipping a purchase. A hyperlink or code can be sent to a user by mail, recipients entering it on a website verifying their postal address. === Telephone number verification === A telephone number can be provided when creating or verifying an account or added to an account to obtain a set of features. During the process of verifying a telephone number, a confirmation code is sent to a phone number specified by a user, for example in an SMS message sent to a mobile phone. As the user receives the code sent, they can enter it on the website to confirm their receipt. === Email verification === An email account is often required to create an account. During this process, a confirmation hyperlink is sent in an email message to an email address specified by a person. The email recipient is instructed in the email message to navigate to the provided confirmation hyperlink if and only if they are the person creating an account. The act of navigating to the hyperlink confirms receipt of the email by the person. The added value of an email account for purposes of account verification depends upon the process of account verification performed by the specific email service provider. === Multi-factor verification === Multi-factor account verification is account verification which simultaneously utilizes a number of techniques. === Multi-party verification === The processes of account verification utilized by multiple service providers can corroborate one another. OpenID Connect includes a user information protocol which can be used to link multiple accounts, corroborating user information. == Account verification and good standing == On some services, account verification is synonymous with good standing. Twitter reserves the right to remove account verification from users' accounts at any time without notice. Reasons for removal may reflect behaviors on and off Twitter and include: promoting hate and/or violence against, or directly attacking or threatening other people on the basis of race, ethnicity, national origin, sexual orientation, gender, gender identity, religious affiliation, age, disability, or disease; supporting organizations or individuals that promote the above; inciting or engaging in the harassment of others; violence and dangerous behavior; directly or indirectly threatening or encouraging any form of physical violence against an individual or any group of people, including threatening or promoting terrorism; violent, gruesome, shocking, or disturbing imagery; self-harm, suicide; and engaging in other activity on Twitter that violates the Twitter Rules. In April 2023, Blue ticks were removed from all Twitter accounts that had not subscribed to Twitter Blue.
Read more →
Feed forward (control)

A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward
Read more →
Downloadable content

Downloadable content (DLC) is additional content created for an already released video game, distributed through the Internet by the game's publisher. It can be added for no extra cost or as a form of video game monetization, enabling the publisher to gain additional revenue from a title after it has been purchased, often using a microtransaction system. DLC can range from cosmetic content, such as skins, to new in-game content, like characters, levels, modes, and larger expansions that may contain a mix of such content as a continuation of the base game. In some games, multiple DLCs (including future DLC not yet released) may be bundled as part of a "season pass"—typically at a discount rather than purchasing each DLC individually. While the Dreamcast was the first home console to support DLC (albeit in a limited form due to hardware and internet connection limitations), Microsoft's Xbox helped popularize the concept. Since the seventh generation of video game consoles, DLC has been a prevalent feature of major video game platforms with internet connectivity. == Etymology == Since the popularization of microtransactions in online distribution platforms such as Steam, the term DLC has become a synonymous for any form of paid content in video games, regardless of whether they constitute the download of new content. Furthermore, this led to the creation of the oxymoronic term "on-disc DLC" for content included on the game's original files but locked behind a paywall. == History == === Precursors to DLC === The earliest form of downloadable content were offerings of full games, such as on the Atari 2600's GameLine service, which allowed users to download games using a telephone line. A similar service, Sega Channel, allowed for the downloading of games to the Sega Genesis over a cable line. While the GameLine and Sega Channel services allowed for the distribution of entire titles, they did not provide downloadable content for existing titles. Expansion packs were sold at retail for some PC games, which featured content such as additional levels, characters, or maps for a base game. They often required an installation of the original game in order to function, but some games (such as Half-Life) had "standalone" expansions, which were essentially spin-off games that reused engine code and assets from the original game. === On consoles === The Dreamcast was the first console to feature online support as a standard; DLC was available, though limited in size due to the narrowband connection and the 200 block limit of the Visual Memory Unit memory card. These online features were still considered a breakthrough in video games. With the release of the Xbox, Microsoft was the second company to implement downloadable content. Many Xbox titles, including Splinter Cell, Halo 2, and Ninja Gaiden, offered varying amounts of extra content, available for download through the Xbox Live service. Most of this content was available free. With the advent of the GameCube, Nintendo was the third company to implement downloadable content. Many GameCube titles offered varying amounts of extra content from Game Boy Advance titles with the GameCube – Game Boy Advance link cable. All of this content was available free. The Xbox 360 (2005) included more robust support for digital distribution, including DLC downloads and purchases, via its Xbox Live Marketplace service. Microsoft believed that publishers would benefit by offering small pieces of content at a small cost ($1 to $5), rather than full expansion packs (~$20), as this would allow players to pick and chose what content they desired, providing revenue to the publishers. Microsoft also utilized a digital currency known as "Microsoft Points" for transactions, which could also be purchased through physical gift cards to avoid the banking fees associated with the small price points. The PlayStation 3 (2006) adopted the same approach with their downloadable hub, the PlayStation Store. Sony planned on having the bulk of its content be purchased separately via many separate online microtransactions for PlayStation Network titles, including Gran Turismo HD Concept and Gran Turismo 5 Prologue. The Wii (2006) featured a sparser amount of downloadable content on their Wii Shop Channel, the bulk of which is accounted for by digital distribution of emulated Nintendo titles from previous generations. Music video games, such as titles from the Guitar Hero and Rock Band franchises, took significant advantage of downloadable content as a means of offering new songs to be played in-game. Harmonix claimed that Guitar Hero II would feature "more online content than anyone has ever seen in a game to this date." Rock Band features the largest number of downloadable items of any console video game, with a steady number of new songs that were added weekly between 2007 and 2013. Acquiring all the downloadable content for Rock Band would, as of July 12, 2012, cost $5,880.10. === On personal computers === As the popularity and speed of internet connections rose, so did the popularity of using the internet for digital distribution of media. User-created game mods and maps were distributed exclusively online, as they were mainly created by people without the infrastructure capable of distributing the content through physical media. In 1997, Cavedog offered a new unit every month as free downloadable content for their real-time strategy computer game Total Annihilation. Later PC digital distribution platforms, such as Games for Windows Marketplace and Steam, would add support for DLC in a similar manner to consoles. === On handhelds === Nokia phones of the late 1990s and early 2000s shipped with side-scrolling shooter Space Impact, available on various models. With the introduction of WAP in 2000, additional downloadable content for the game, with extra levels, became available. The Nintendo Wi-Fi Connection service on the Nintendo DS could be used to obtain a form of DLC for certain games, such as Picross DS—where players could download puzzle "packs" of classic puzzles from previous Picross series games (such as Mario's Picross). as well as downloadable user generated content. Due to the Nintendo DS's use of cartridges and lack of dedicated storage, most "DLC" for DS games was limited in scope, or in some cases (such as Professor Layton and the Curious Village and Moero! Nekketsu Rhythm Damashii Osu! Tatakae! Ouendan 2), was already part of the game's data on the cartridge, and merely unlocked. Its successor, the Nintendo 3DS, natively supported the purchase of DLC for supported titles via Nintendo eShop. Starting with iPhone OS 3, downloadable content became available for the platform via applications bought from the App Store. While this ability was initially only available to developers for paid applications, Apple eventually allowed for developers to offer this in free applications as well in October 2009. == On-disc DLC == In some cases, a purchased DLC may not actually download new content to the device, but merely consists of data used to enable associated content that is already present within the game's data. DLC of this nature revealed via data mining is typically referred to as "on-disc DLC" or PULC (premium unlockable content). This practice has sometimes been considered controversial, with publishers being accused of using what is effectively a microtransaction to lock access to content that was already contained within the game as sold at retail. Data relating to future DLC may be included on-disc or downloaded during updates for technical reasons as well, either to ensure online multiplayer compatibility for existing content between players who have not yet purchased the new DLC, or as dormant support code for planned content that is still in development at the time of the release. == Monetization == Downloadable content is often offered for a price. Since Facebook games popularized the business model of microtransactions, some have criticized downloadable content as being overpriced and an incentive for developers to leave items out of the initial release, with The Elder Scrolls IV: Oblivion's horse armor DLC having faced a mixed reception upon its release for that reason. However, by 2009, the Horse Armor DLC was one of the top ten content packs that Bethesda had sold, which justified the DLC model for future games. Where a normal software disc may allow its license sold or traded, DLC is generally locked to a specific user's account and does not come with the ability to transfer that license to another user. In addition to individual content downloads, video game publishers sometimes offer a "season pass", which allows users to pre-order a selection of upcoming content over a specific time period, and ensuring the customer's ability to immediately obtain the content upon release. As users do not have the ability to fully preview the content before their purchase, there is a chance that the content of a season
Read more →
LTE (telecommunication)

In telecommunications, Long Term Evolution (LTE) is a standard for wireless broadband communication for cellular mobile devices and data terminals. It is considered to be a "transitional" 4G technology, and is therefore also referred to as 3.95G as a step above 3G. LTE is based on the 2G GSM/EDGE and 3G UMTS/HSPA standards. It improves on those standards' capacity and speed by using a different radio interface and core network improvements. LTE is the upgrade path for carriers with both GSM/UMTS networks and CDMA2000 networks. LTE has been succeeded by LTE Advanced, which is officially defined as a "true" 4G technology and also named "LTE+". == Terminology == The standard is developed by the 3GPP (3rd Generation Partnership Project) and is specified in its Release 8 document series, with minor enhancements described in Release 9. LTE is also called 3.95G and has been marketed as 4G LTE and Advanced 4G; but the original version did not meet the technical criteria of a 4G wireless service, as specified in the 3GPP Release 8 and 9 document series for LTE Advanced. The requirements were set forth by the ITU-R organisation in the IMT Advanced specification; but, because of market pressure and the significant advances that WiMAX, Evolved High Speed Packet Access, and LTE bring to the original 3G technologies, ITU-R later decided that LTE and the aforementioned technologies can be called 4G technologies. The LTE Advanced standard formally satisfies the ITU-R requirements for being considered IMT-Advanced. To differentiate LTE Advanced and WiMAX-Advanced from current 4G technologies, ITU has defined the latter as "True 4G". == Overview == LTE stands for Long Term Evolution and is a registered trademark owned by ETSI (European Telecommunications Standards Institute) for the wireless data communications technology and development of the GSM/UMTS standards. However, other nations and companies do play an active role in the LTE project. The goal of LTE was to increase the capacity and speed of wireless data networks using new DSP (digital signal processing) techniques and modulations that were developed around the turn of the millennium. A further goal was the redesign and simplification of the network architecture to an IP-based system with significantly reduced transfer latency compared with the 3G architecture. The LTE wireless interface is incompatible with 2G and 3G networks, so it must be operated on a separate radio spectrum. The idea of LTE was first proposed in 1998, with the use of the COFDM radio access technique to replace the CDMA and studying its Terrestrial use in the L band at 1428 MHz (TE) In 2004 by Japan's NTT Docomo, with studies on the standard officially commenced in 2005. In May 2007, the LTE/SAE Trial Initiative (LSTI) alliance was founded as a global collaboration between vendors and operators with the goal of verifying and promoting the new standard to ensure the global introduction of the technology as quickly as possible. The LTE standard was finalized in December 2008, and the first publicly available LTE service was launched by TeliaSonera in Oslo and Stockholm on December 14, 2009, as a data connection with a USB modem. The LTE services were launched by major North American carriers as well, with the Samsung SCH-r900 being the world's first LTE Mobile phone starting on September 21, 2010, and Samsung Galaxy Indulge being the world's first LTE smartphone starting on February 10, 2011, both offered by MetroPCS, and the HTC ThunderBolt offered by Verizon starting on March 17 being the second LTE smartphone to be sold commercially. In Canada, Rogers Wireless was the first to launch LTE network on July 7, 2011, offering the Sierra Wireless AirCard 313U USB mobile broadband modem, known as the "LTE Rocket stick" then followed closely by mobile devices from both HTC and Samsung. Initially, CDMA operators planned to upgrade to rival standards called UMB and WiMAX, but major CDMA operators (such as Verizon, Sprint and MetroPCS in the United States, Bell and Telus in Canada, au by KDDI in Japan, SK Telecom in South Korea and China Telecom/China Unicom in China) have announced instead they intend to migrate to LTE. The next version of LTE is LTE Advanced, which was standardized in March 2011. Services commenced in 2013. Additional evolution known as LTE Advanced Pro was approved in 2015. The LTE specification provides downlink peak rates of 300 Mbit/s, uplink peak rates of 75 Mbit/s, and QoS provisions permitting a transfer latency of less than 5 ms in the radio access network. LTE has the ability to manage fast-moving mobiles and supports multicast and broadcast streams. LTE supports scalable carrier bandwidths, from 1.4 MHz to 20 MHz and supports both frequency division duplexing (FDD) and time-division duplexing (TDD). The IP-based network architecture, called the Evolved Packet Core (EPC) designed to replace the GPRS Core Network, supports seamless handovers for both voice and data to cell towers with older network technology such as GSM, UMTS and CDMA2000. The simpler architecture results in lower operating costs (for example, each E-UTRA cell will support up to four times the data and voice capacity supported by HSPA). Because LTE frequencies and bands differ from country to country, only multi-band phones can use LTE in all countries where it is supported. == History == === 3GPP standard development timeline === In 2004, NTT Docomo of Japan proposes LTE as the international standard. In September 2006, Siemens Networks (today Nokia Networks) showed in collaboration with Nomor Research the first live emulation of an LTE network to the media and investors. As live applications, two users streaming an HDTV video in the downlink and playing an interactive game in the uplink have been demonstrated. In February 2007, Ericsson demonstrated for the first time in the world, LTE with bit rates up to 144 Mbit/s In September 2007, NTT Docomo demonstrated LTE data rates of 200 Mbit/s with power level below 100 mW during the test. In November 2007, Infineon presented the world's first RF transceiver named SMARTi LTE, supporting LTE functionality in a single-chip RF silicon processed in CMOS In early 2008, LTE test equipment began shipping from several vendors and at the Mobile World Congress 2008 in Barcelona, Ericsson demonstrated the world's first end-to-end mobile call enabled by LTE on a small handheld device. Motorola demonstrated an LTE RAN (Radio Access Network) standard compliant eNodeB and LTE chipset at the same event. At the February 2008 Mobile World Congress: Motorola demonstrated how LTE can accelerate the delivery of personal media experience with HD video demo streaming, HD video blogging, online gaming, and VoIP over LTE running a RAN standard-compliant LTE network & LTE chipset. Ericsson EMP (later ST-Ericsson) demonstrated the world's first end-to-end LTE call on handheld Ericsson demonstrated LTE FDD and TDD mode on the same base station platform. Freescale Semiconductor demonstrated streaming HD video with peak data rates of 96 Mbit/s downlink and 86 Mbit/s uplink. NXP Semiconductors (later part of ST-Ericsson) demonstrated a multi-mode LTE modem as the basis for a software-defined radio system for use in cellphones. picoChip and Mimoon demonstrated a base station reference design. This runs on a common hardware platform (multi-mode / software-defined radio) with their WiMAX architecture. In April 2008, Motorola demonstrated the first EV-DO to LTE hand-off handling over streaming a video from LTE to a commercial EV-DO network and back to LTE. In April 2008, LG Electronics and Nortel demonstrated LTE data rates of 50 Mbit/s while travelling at 110 km/h (68 mph). In November 2008, Motorola demonstrated industry first over-the-air LTE session in 700 MHz spectrum. Researchers at Nokia Siemens Networks and Heinrich Hertz Institut have demonstrated LTE with 100 Mbit/s Uplink transfer speeds. At the February 2009 Mobile World Congress: Infineon demonstrated a single-chip 65 nm CMOS RF transceiver providing 2G/3G/LTE functionality Launch of ng Connect program, a multi-industry consortium founded by Alcatel-Lucent to identify and develop wireless broadband applications. Motorola provided LTE drive tour on the streets of Barcelona to demonstrate LTE system performance in a real-life metropolitan RF environment In July 2009, Nujira demonstrated efficiencies of more than 60% for an 880 MHz LTE Power Amplifier In August 2009, Nortel and LG Electronics demonstrated the first successful handoff between CDMA and LTE networks in a standards-compliant manner In August 2009, Alcatel-Lucent receives FCC certification for LTE base stations for the 700 MHz spectrum band. In September 2009, Nokia Siemens Networks demonstrated the world's first LTE call on standards-compliant commercial software. In October 2009, Ericsson and Samsung demonstrated interoperability between the first ever commercial LTE device and the live network in
Read more →
CSS box model

In web development, the CSS box model refers to how HTML elements are modeled in browser engines and how the dimensions of those HTML elements are derived from CSS properties. It is a fundamental concept for the composition of HTML webpages. The guidelines of the box model are described by web standards World Wide Web Consortium (W3C) specifically the CSS Working Group. For much of the late-1990s and early 2000s there had been non-standard compliant implementations of the box model in mainstream browsers. With the advent of CSS2 in 1998, which introduced the box-sizing property, the problem had mostly been resolved. == Specifics == The Cascading Style Sheets (CSS) specification describes how elements of web pages are displayed by graphical browsers. Section 4 of the CSS1 specification defines a "formatting model" that gives block-level elements—such as p and blockquote—a width and height, and three levels of boxes surrounding it: padding, borders, and margins. While the specification never uses the term "box model" explicitly, the term has become widely used by web developers and web browser vendors. All HTML elements can be considered "boxes", this includes div tag, p tag, or a tag. Each of those boxes has five modifiable dimensions: the height and width describe dimensions of the actual content of the box (text, images, ...) the padding describes the space between this content and the border of the box the border is any kind of line (solid, dotted, dashed...) surrounding the box, if present the margin is the space around the border According to the CSS1 specification, released by W3C in 1996 and revised in 1999, when a width or height is explicitly specified for any block-level element, it should determine only the width or height of the visible element, with the padding, borders, and margins applied afterward. Before CSS3, this box model was known as W3C box model, in CSS3, it is known as the content-box. The total width of a box is therefore margin-left + border-left + padding-left + width + padding-right + border-right + margin-right. Similarly, the total height of a box equals margin-top + border-top + padding-top + height + padding-bottom + border-bottom + margin-bottom. For example, the following CSS code would specify the box dimensions of each block belonging to 'my-class'. Moreover, each such box will have total height 140px and width 240px. CSS3 introduced the Internet Explorer box model to the standard, known referred to as border-box. == History == Before HTML 4 and CSS, very few HTML elements supported both border and padding, so the definition of the width and height of an element was not very contentious. However, it varied depending on the element. The HTML width attribute of a table defined the width of the table including its border. On the other hand, the HTML width attribute of an image defined the width of the image itself (inside any border). The only element to support padding in those early days was the table cell. Width for the cell was defined as "the suggested width for a cell content in pixels excluding the cell padding." In 1996, CSS introduced margin, border and padding for many more elements. It adopted a definition width in relation to content, border, margin and padding similar to that for a table cell. This has since become known as the W3C box model. At the time, very few browser vendors implemented the W3C box model to the letter. The two major browsers at the time, Netscape 4.0 and Internet Explorer 4.0 both defined width and height as the distance from border to border. This has been referred to as the traditional or the Internet Explorer box model. Internet Explorer in "quirks mode" includes the content, padding and borders within a specified width or height; this results in a narrower or shorter rendering of a box than would result following the standard behavior. The Internet Explorer box model behavior was often considered a bug, because of the way in which earlier versions of Internet Explorer handle the box model or sizing of elements in a web page, which differs from the standard way recommended by the W3C for the Cascading Style Sheets language. As of Internet Explorer 6, the browser supports an alternative rendering mode (called the "standards-compliant mode") which solves this discrepancy. However, for backward compatibility reasons, all versions still behave in the usual, non-standard way by default (see quirks mode). Internet Explorer for Mac is not affected by this non-standard behavior. === Workarounds === Internet Explorer versions 6 and onward are not affected by the bug if the page contains certain HTML document type declarations. These versions maintain the buggy behavior when in quirks mode for reasons of backward compatibility. For example, quirks mode is triggered: When the document type declaration is absent or incomplete; When an HTML 3 or earlier document is encountered; When an HTML 4.0 Transitional or Frameset document type declaration is used and a system identifier (URI) is not present; When an SGML comment or other unrecognized content appears before the document type declaration Internet Explorer 6 also uses quirks mode if there is an XML declaration prior to the document type declaration. Various workarounds have been devised to force Internet Explorer versions 5 and earlier to display Web pages using the W3C box model. These workarounds generally exploit unrelated bugs in Internet Explorer's CSS selector processing in order to hide certain rules from the browser. The best known of these workarounds is the "box model hack" developed by Tantek Çelik, a former Microsoft employee who developed this idea while working on Internet Explorer for the Macintosh. It involves specifying a width declaration for Internet Explorer for Windows, and then overriding it with another width declaration for CSS-compliant browsers. This second declaration is hidden from Internet Explorer for Windows by exploiting other bugs in the way that it parses CSS rules. The implementation of these CSS “hacks” has been further complicated by the public release of Internet Explorer 7, which has had some issues fixed, but not others, causing undesired results in pages using these hacks. Box model hacks have proven unreliable because they rely on bugs in browsers' CSS support that may be fixed in later versions. For this reason, some Web developers have instead recommended either avoiding specifying both width and padding for the same element or using conditional comment and/or CSS filters to work around the box model bug in older versions of Internet Explorer. == Support for Internet Explorer's box model == Web designer Doug Bowman has said that the original Internet Explorer box model represents a better, more logical approach. Peter-Paul Koch gives the example of a physical box, whose dimensions always refer to the box itself, including potential padding, but never its content. He says that this box model is more useful for graphic designers, who create designs based on the visible width of boxes rather than the width of their content. Bernie Zimmermann says that the Internet Explorer box model is closer to the definition of cell dimensions and padding used in the HTML table model. The W3C has included a "box-sizing" property in CSS3. When box-sizing: border-box; is specified for an element, any padding or border of the element is drawn inside the specified width and height, "as commonly implemented by legacy HTML user agents". Internet Explorer 8, WebKit browsers such as Apple Safari 5.1+ and Google Chrome, Gecko-based browsers such as Mozilla Firefox 29.0 and later, Opera 7.0 and later, and Konqueror 3.3.2 and later support the CSS3 box-sizing property. Gecko browsers previous than 29.0 support the same functionality using the browser-specific -moz-box-sizing property. border-box is the default box model used in Bootstrap framework.
Read more →
Fluency Voice Technology

Fluency Voice Technology was a company that developed and sold packaged speech recognition solutions for use in call centers. Fluency's Speech Recognition solutions are used by call centers worldwide to improve customer service and significantly reduce costs and are available on-premises and hosted. == History == 1998 – Fluency was created as a spin-off from the Voice Research & Development team of a company called netdecisions. This R&D operation was established in Cambridge UK. The focus of the development was speech recognition systems based on the VXML standard. 2001 – Fluency became a separate entity in May 2001. Fluency began the creation of a software development platform specifically aimed at automating call center activities. This platform became Fluency's VoiceRunner. 2002 to 2004 – Fluency establishes accomplishes many successful deployments in customer sites such as National Express and Barclaycard. 2003 – Fluency expanded into the USA. Fluency also acquires Vocalis of Cambridge, UK in August 2003. 2004 – Fluency receives £6 million investment from leading European Venture Capitalists and establishes a global OEM partnership with Avaya, and the acquisition of SRC Telecom. 2008 – Fluency is acquired by Syntellect Ltd == Customers == Call Centers around the world use Fluency to improve service and reduce costs. They include Travelodge, Standard Life Bank, Sutton and East Surrey Water, Pizza Hut, CWT, Barclays, Powergen, First Choice, OutRight, J D Williams, Capital Blue Cross, Chelsea Building Society, EDF, bss, TV Licensing and Capita Software Services.
Read more →
Homeboyz Interactive

Homeboyz Interactive (HBI) was a faith-based recruitment, training and job placement non-profit business in Milwaukee, Wisconsin, United States, founded by a Jesuit brother in 1996 to transform gang members into productive workers. == History == James Holub, a former Jesuit brother affiliated with Wheeling Jesuit University, asked gang members in the Southside of Milwaukee, WI how they could be helped, to break the cycle of poverty and violence. The youth suggested that they be trained for work they found exciting. To attract interest, the training must lead to jobs that paid at least a living wage, and computer skills seemed the most attractive. The non-profit Homeboyz Interactive was established to prepare professionals in web design, application development, and PC/network support. This non-profit outfit spawned the for-profit web design firm HBI Consulting, which provided trainees with work experience. It turned out more than 20 teachers yearly for computer and computer network programs for high schools and other clients, as well as for computer service providers. Some graduates of the program continued their education, some founded their own business, and others continued working at HBI. The Economist described this effort as "turning thugs into programmers" on Milwaukee's South Side, which has proportionally twice as many murders as New York. Holub had "buried his 28th gang member" before he implemented the Homeboyz plan, with the understanding that "nothing stops a bullet like a job." The programs would pass through about 80 prospects a year who successfully completed training and provide them with a job while studying for their high school equivalency test, before they were asked to decide in which direction to go. Most accepted a job or went on to community college but about 25 entered the Homeboyz training for computer programmers. Of first 150 graduates of this program none lost their job; their average pay after two years was US$63,000. Some preferred to return to full-time work at HBI. By 2002, a total of 142 people had graduated from HBI training and moved into full-time IT careers. The training curriculum as of 2000 included JavaScript and Photoshop, among other web-development tools. In 2000, HBI received a 14% ownership stake in reEmploy.com, a payrolling company, in exchange for the development of an electronic time sheet created by the organization. As of 2001, HBI Consulting, the for profit web design firm, had 72 clients. Among those clients were GE Medical, Toyota Forklift, Northwestern Mutual Life, Verizon Wireless, BP; and Marquette University. Companies that graduates of HBI's training programs secured positions have included Northwestern Mutual and Manpower Inc., United Community Center in Milwaukee and EKI Consulting. A pair of graduates also started their own company in 2002, Innovative Source, a web design firm, which itself has had clients such as the University of Wisconsin-Milwaukee and the Milwaukee Women's Center. This was a common path forward, graduates starting their own consulting firms. In 2004, HBI received a grant for General Support from the Vine and Branches Foundation in the amount of US$120,000. The product Project Foundry found its start in the difficulty of managing project-based learning across dozens of students with widely varying levels of skill, a problem encountered by Shane Krukowski, who developed the software while teaching at HBI. Krukowski subsequently an eponymous company to commercialize the software through a subscription-based business model. Some came to Homeboyz through the criminal courts or Department of Corrections. A Jesuit Volunteer (JV) was assigned to work with the program, and to add a spiritual dimension through regular reflection together. Gradually the market began prioritizing graphic design and flash images more than site construction. After 2006 Homeboyz HBI morphed into several spinoffs and ceased to exist as a separate entity.
Read more →
InteLex Past Masters

InteLex Past Masters is a collection of full-text web-based scholarly editions of classic works in the humanities. InteLex Corporation was founded in 1989 by its current chief executive officer, Mark Rooks, to produce electronic versions of the works of the great philosophers, based on existing scholarly editions. The company is located in Charlottesville, Virginia. Its databases are marketed to academic institutions, with pricing based on the individual collections purchased. Content is provided in XML and searchable image format and is accessed through the InteLex Corporation website. In addition to philosophy, subject coverage includes religious studies, English literature, women's writing, social science, and history of science. InteLex databases are found in institutions in over 65 countries around the world.
Read more →