AI Coding Meta

AI Coding Meta — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Hierarchical RBF

  In computer graphics, hierarchical RBF is an interpolation method based on radial basis functions (RBFs). Hierarchical RBF interpolation has applications in treatment of results from a 3D scanner, terrain reconstruction, and the construction of shape models in 3D computer graphics (such as the Stanford bunny, a popular 3D model). This problem is informally named as "large scattered data point set interpolation." == Method == The steps of the interpolation method (in three dimensions) are as follows: Let the scattered points be presented as set P = { c i = ( x i , y i , z i ) | i = 1 N ⊂ R 3 } {\displaystyle \mathbf {P} =\{\mathbf {c} _{i}=(\mathbf {x} _{i},\mathbf {y} _{i},\mathbf {z} _{i})\vert _{i=1}^{N}\subset \mathbb {R} ^{3}\}} Let there exist a set of values of some function in scattered points H = { h i | i = 1 N ⊂ R } {\displaystyle \mathbf {H} =\{\mathbf {h} _{i}\vert _{i=1}^{N}\subset \mathbb {R} \}} Find a function f ( x ) {\displaystyle \mathbf {f} (\mathbf {x} )} that will meet the condition f ( x ) = 1 {\displaystyle \mathbf {f} (\mathbf {x} )=1} for points lying on the shape and f ( x ) ≠ 1 {\displaystyle \mathbf {f} (\mathbf {x} )\neq 1} for points not lying on the shape As J. C. Carr et al. showed, this function takes the form f ( x ) = ∑ i = 1 N λ i φ ( x , c i ) {\displaystyle \mathbf {f} (\mathbf {x} )=\sum _{i=1}^{N}\lambda _{i}\varphi (\mathbf {x} ,\mathbf {c} _{i})} where φ {\displaystyle \varphi } is a radial basis function and λ {\displaystyle \lambda } are the coefficients that are the solution of the following linear system of equations: [ φ ( c 1 , c 1 ) φ ( c 1 , c 2 ) . . . φ ( c 1 , c N ) φ ( c 2 , c 1 ) φ ( c 2 , c 2 ) . . . φ ( c 2 , c N ) . . . . . . . . . . . . φ ( c N , c 1 ) φ ( c N , c 2 ) . . . φ ( c N , c N ) ] ∗ [ λ 1 λ 2 . . . λ N ] = [ h 1 h 2 . . . h N ] {\displaystyle {\begin{bmatrix}\varphi (c_{1},c_{1})&\varphi (c_{1},c_{2})&...&\varphi (c_{1},c_{N})\\\varphi (c_{2},c_{1})&\varphi (c_{2},c_{2})&...&\varphi (c_{2},c_{N})\\...&...&...&...\\\varphi (c_{N},c_{1})&\varphi (c_{N},c_{2})&...&\varphi (c_{N},c_{N})\end{bmatrix}}{\begin{bmatrix}\lambda _{1}\\\lambda _{2}\\...\\\lambda _{N}\end{bmatrix}}={\begin{bmatrix}h_{1}\\h_{2}\\...\\h_{N}\end{bmatrix}}} For determination of surface, it is necessary to estimate the value of function f ( x ) {\displaystyle \mathbf {f} (\mathbf {x} )} in specific points x. A lack of such method is a considerable complication on the order of O ( n 2 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{2})} to calculate RBF, solve system, and determine surface. == Other methods == Reduce interpolation centers ( O ( n 2 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{2})} to calculate RBF and solve system, O ( m n ) {\displaystyle \mathbf {O} (\mathbf {m} \mathbf {n} )} to determine surface) Compactly support RBF ( O ( n log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {n} \log {\mathbf {n} })} to calculate RBF, O ( n 1.2..1.5 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{1.2..1.5})} to solve system, O ( m log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {m} \log {\mathbf {n} })} to determine surface) FMM ( O ( n 2 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{2})} to calculate RBF, O ( n log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {n} \log {\mathbf {n} })} to solve system, O ( m + n log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {m} +\mathbf {n} \log {\mathbf {n} })} to determine surface) == Hierarchical algorithm == A hierarchical algorithm allows for an acceleration of calculations due to decomposition of intricate problems on the great number of simple (see picture). In this case, hierarchical division of space contains points on elementary parts, and the system of small dimension solves for each. The calculation of surface in this case is taken to the hierarchical (on the basis of tree-structure) calculation of interpolant. A method for a 2D case is offered by Pouderoux J. et al. For a 3D case, a method is used in the tasks of 3D graphics by W. Qiang et al. and modified by Babkov V.

  Read more →
• 

  Höhere Graphische Bundes-Lehr- und Versuchsanstalt

  The Höhere Graphische Bundes-Lehr- und Versuchsanstalt (HGBLuVA) ("Higher Federal Institution for Graphic Education and Research"), now commonly known as "die Graphische", founded in 1888 in Vienna, is a vocational college for professions in visual communication and media technology in Austria. == History == === Opening === Originally set up as a photographic research institute by the President of the Photographic Society, the graphic teaching and research institute (GLV) was created through the incorporation of the photographic school (a department for photographic reproduction processes connected to the Salzburg State Building School) and the Hörwarter general drawing school in Vienna. Since its foundation, it has made an important contribution to the establishment and development of the graphic professions. According to a resolution of March 14, 1887, the City Council of Vienna made three floors of the municipal building in Vienna VII, Westbahnstraße 25, available to the former Schottenfelder Realschule for the establishment of a teaching and research institute for photography and reproduction processes. The k. k. Lehr- und Versuchsanstalt für Photographie und Reproductionsverfahren, founded and directed (1888–1923) by Josef Maria Eder, previously of the Technologische Gewerbemuseum (Museum of Applied Technology), for which he established a Section for Photography and Reproduction Techniques, and the Vienna State Trade School where, recently qualified as a university lecturer, he began teaching chemistry and physics in 1881. It opened on March 1, 1888 with 108 students. In the next school year the number of students rose to 174. In 1890, Eder placed a Wothly solar camera (an early means of enlarging negatives) on the roof. In the context of the history of vocational schools and the applied arts, pioneering educational reforms in Austria from the 1870s created institutions like it outside the format of the classical university, it being a special variation on the “state trade school” (“Staats-Gewerbeschule”). Eder based his institution on earlier foreign models such as the Conservatoire des arts et métiers in Paris (founded 1794), that housed a museum of history and technology and hosted with evening lectures and demonstrations, with lectures in photography commencing in 1891. From 1897 onwards the name Graphische Lehr- und Versuchsanstalt came into being . In 1906, Emperor Franz Joseph granted the school the designation “Imperial and Royal” in the title, and the Republic of Austria confirmed this distinction when the school's Federal Chancellery approved the use of the national coat of arms. === The beginnings === The GLV was instituted on August 27, 1887 "by the highest resolution to approve the activation of this teaching and research institute in Vienna on March 1, 1888". The aim of the institute was the “training of specialist photographers, retouchers, collotype printers, photolithographers, etc., the instruction of artists, scholars and technicians who want to learn photography as an auxiliary science, furthermore the testing of equipment, chemicals and the implementation of independent scientific investigations in the areas of Photochemistry and Related Subjects”. The school consisted of two departments; the Institute for Photography and Reproduction Processes and the Research Institute, and in 1891 the Board of Book Printers and Type Founders pointed out the urgent need to add a department for book printers to the school. In 1897 an additional section for the book and illustration trade was opened, the school called "KK Graphische Lehr- und Versuchsanstalt" was then divided into four sections: Section I: Institute for Photography and Reproduction (corresponds to the former Institute for Photography and Reproduction Processes) Section II: College for the book and illustration trade Section III: Research institute for photochemistry and graphic printing processes (corresponds to the original research institute) Section IV: Collections: graphic collection, library and equipment collection The first original lithographs by famous artists such as Luigi Kasimir and Tina Blau are thanks to the special course for lithography and lithography introduced in 1905 and 'algraphy' - a planographic printing process from an aluminum plate instead of the stone used in lithography - was first taught in Austria in 1896 at the GLV. The specialty course for lithography and lithography existed until 1913/14, after which a specialist course for xylography (wood engraving and woodcuts) was offered. In 1908 the graphic arts department was set up on the top floor of the neighbouring house at Westbahnstraße 27 connected by a spiral staircase still in existence in the courtyard at the current location on Leyserstraße. === Women in the graphic teaching and research institute === From 1908 women were also officially admitted. For the period from 1888 to 1918/19, a total of 718 female students at the Graphische are recorded in the largely preserved class lists. Due to changes and new requirements in the job description, the proportion of women continued to grow, so that in some classes it exceeded two thirds. === The Graphics Department === In 1916, the school statute was changed: all-day lessons with photography internship in the 1st and 2nd years as well as training for disabled people were introduced and a drawing school was added. After the First World War, the school was renamed several times: In 1919 the name was "Deutsch-Österreichische Graphische Lehr- und Versuchsanstalt"; changed in 1920 to "Staatliche Graphische Lehr- und Versuchsanstalt" and in 1923 to "Graphic Education and Research Institute". === The school in the time of National Socialism === The "annexation of Austria by Germany" resulted in organisational restructuring: semesters were introduced and the GLV was made a subordinate level of a university of the graphic arts administered in Leipzig. In 1939 the school became a state graphic teaching and research institute . Up to this point, two thirds of all Austrian postage stamps had been designed and engraved in the Graphische. === Post-war period === In 1945 the period of study at the technical school was extended to four years. In 1948, “manual graphics” became “commercial graphics” followed by an honours year. In 1959, a department A was developed: a three-class specialist department for photography with a master class, and a department B: a specialist department for commercial graphics with four classes and an honours year. Through further school reforms, the university entrance qualification was acquired with the completion of the now five-year course and honours qualification. In 1967, due to a lack of space, the Westbahnstrasse was moved to the new Carl Appel building in Leyserstrasse. === The new building, 1963 === On May 22, 1963, the foundation stone of the new campus was laid in the 14th district in the Breitenseer Strasse, Leyserstrasse and Spallartgasse area (Kommandogebäude Theodor Körner). In 1967 the move to the new building began and in 1968 the official opening coincided with the 80th anniversary of the school. In 1963/64 the first year of the five-year high school for reprography and printing technology began. There was also a four-year technical school. With the advent of personal computers and their use in the graphics industry, change comes first in typesetting and later in image processing, and in 1984 the advent of desktop publishing brought a revolution that permanently challenged the distinction between photographer, typesetter, layout artist and printer. In 1988, the Graphische celebrated its 100th anniversary. The rapid development of technology shaped school events in the 1980s, as did the rapid advance of offset printing - albeit at the expense of Letterpress printing. In reproduction technology, scanner technology for the production of colour separations displaced reprography. === Renovation, 2006 === Due to renovation work on the building in Leyserstraße, the management and the photography, multimedia and graphics departments moved to an alternative location in Vienna's first district at Schellinggasse 13. After the work was completed, the school was relocated in February 2008. == Notable teachers and students ==

  Read more →
• 

  Common-mode signal

  In electrical engineering, a common-mode signal is the identical component of voltage present at both input terminals of an electrical device. In telecommunication, the common-mode signal on a transmission line is also known as longitudinal voltage. Common-mode interference (CMI) is a type of common-mode signal. Common-mode interference is interference that appears on both signal leads, or coherent interference that affects two or more elements of a network. In most electrical circuits, desired signals are transferred by a differential voltage between two conductors. If the voltages on these conductors are U1 and U2, the common-mode signal is the average of the voltages: U cm = U 1 + U 2 2 {\displaystyle U_{\text{cm}}={\frac {U_{1}+U_{2}}{2}}} When referenced to the local common or ground, a common-mode signal appears on both lines of a two-wire cable, in phase and with equal amplitudes. Technically, a common-mode voltage is one-half the vector sum of the voltages from each conductor of a balanced circuit to local ground or common. Such signals can arise from one or more of the following sources: Radiated signals coupled equally to both lines, An offset from signal common created in the driver circuit, or A ground differential between the transmitting and receiving locations. Noise induced into a cable, or transmitted from a cable, usually occurs in the common mode, as the same signal tends to be picked up by both conductors in a two-wire cable. Likewise, RF noise transmitted from a cable tends to emanate from both conductors. Elimination of common-mode signals on cables entering or leaving electronic equipment is important to ensure electromagnetic compatibility. Unless the intention is to transmit or receive radio signals, an electronic designer generally designs electronic circuits to minimise or eliminate common-mode effects. == Methods of eliminating common-mode signals == Differential amplifiers or receivers that respond only to voltage differences, e.g. those between the wires that constitute a pair. This method is particularly suited for instrumentation where signals are transmitted through DC bias. For sensors with very high output impedance that require very high common-mode rejection ratio, a differential amplifier is combined with input buffers to form an instrumentation amplifier. An inductor where a pair of signaling wires follow the same path through the inductor, e.g. in a bifilar winding configuration such as used in Ethernet magnetics. Useful for AC and DC signals, but will filter only higher frequency common-mode signals. A transformer, which is useful for AC signals only, and will filter any form of common-mode noise, but may be used in combination with a bifilar wound coil to eliminate capacitive coupling of higher frequency common-mode signals across the transformer. Used in twisted pair Ethernet. Common-mode filtering may also be used to prevent egress of noise for electromagnetic compatibility purposes: High frequency common-mode signals (e.g., RF noise from a computing circuit) may be blocked using a ferrite bead clamped to the outside of a cable. These are often observable on laptop computer power supplies near the jack socket, and good quality mouse or printer USB cables and HDMI cables. Switch mode power supplies include common and differential mode filtering inductors to block the switching signal noise returning into mains wiring. Common-mode rejection ratio is a measure of how well a circuit eliminates common-mode interference.

  Read more →
• 

  Mini-STX

  Mini-STX (mSTX, Mini Socket Technology EXtended, originally "Intel 5x5") is a computer motherboard form factor that was released by Intel in 2015 (as "Intel 5x5"). These motherboards measure 147mm by 140mm (5.8" x 5.5"), making them larger than "4x4" NUC (102x102mm / 4.01" x 4.01" inches) and Nano-ITX (120x120mm / 4.7" x 4.7") boards, but notably smaller than the more common Mini-ITX (170x170mm / 6.7" x 6.7") boards. Unlike these standards, which use a square shape, the Mini-STX form factor is 7mm longer from front-to-rear, making it slightly rectangular. == Mini-STX design elements == The Mini-STX design suggests (but does not require) support for: Socketed processors (e.g. LGA or PGA CPUs) Onboard power regulation circuitry, enabling direct DC power input IO ports embedded on the front and rear of the motherboard (akin to NUC, but unlike typical motherboards which often use headers instead to connect built-in ports on enclosures) == Adoption by manufacturers == This motherboard form factor is still not in particularly common use with consumer-PC manufacturers, although there are a few offerings: ASRock offers both DeskMini kits (that use mini-STX boards) and standalone motherboards, Asus offer VivoMini kits (that use mini-STX boards) and standalone motherboards, Gigabyte offers a few motherboards, and industrial PC suppliers (e.g. Kontron, Iesy, ASRock Industrial) also provide some options for mini-STX equipment. == Derivatives == ASRock developed a derivative of mini-STX, dubbed micro-STX, for their 'DeskMini GTX/RX' small form-factor PCs and industrial motherboards. Micro-STX adds an MXM slot which allows the use of special PCI Express expansion cards, including graphics or machine learning accelerators, but increases the width of the board to be extended two inches, resulting in measurements of 147 x 188 mm (5.8" x 7.4")

  Read more →
• 

  The Triple Revolution

  "The Triple Revolution" was an open memorandum sent to U.S. President Lyndon B. Johnson and other government figures on March 22, 1964. It concerned three megatrends of the time: increasing use of automation, the nuclear arms race, and advancements in human rights. Drafted under the auspices of the Center for the Study of Democratic Institutions, it was signed by an array of noted social activists, professors, and technologists who identified themselves as the Ad Hoc Committee on the Triple Revolution. The chief initiator of the proposal was W. H. "Ping" Ferry, at that time a vice-president of CSDI, basing it in large part on the ideas of the futurist Robert Theobald. == Overview == The statement identified three revolutions underway in the world: the cybernation revolution of increasing automation; the weaponry revolution of mutually assured destruction; and the human rights revolution. It discussed primarily the cybernation revolution. The committee claimed that machines would usher in "a system of almost unlimited productive capacity" while continually reducing the number of manual laborers needed, and increasing the skill needed to work, thereby producing increasing levels of unemployment. It proposed that the government should ease this transformation through large-scale public works, low-cost housing, public transit, electrical power development, income redistribution, union representation for the unemployed, and government restraint on technology deployment. == Legacy == Martin Luther King Jr.'s final Sunday sermon, delivered six days before his April 1968 assassination, explicitly references the thesis of "The Triple Revolution": There can be no gainsaying of the fact that a great revolution is taking place in the world today. In a sense it is a triple revolution: that is, a technological revolution, with the impact of automation and cybernation; then there is a revolution in weaponry, with the emergence of atomic and nuclear weapons of warfare; then there is a human rights revolution, with the freedom explosion that is taking place all over the world. Yes, we do live in a period where changes are taking place. And there is still the voice crying through the vista of time saying, "Behold, I make all things new; former things are passed away." In Harlan Ellison's 1967 anthology Dangerous Visions, Philip José Farmer's story "Riders of the Purple Wage" uses the Triple Revolution document as the premise of a future society, in which the "purple wage" of the title is a guaranteed income dole on which most of the population lives. At the 1968 World Science Fiction Convention in San Francisco, Farmer delivered a lengthy Guest of Honor speech in which he called for the founding of a grassroots activist organization called REAP which would work for implementation of the Ad Hoc Committee's recommendations. Looking back on the proposal in his 2008 book, Daniel Bell wrote: "the cybernetic revolution quickly proved to be illusory. There were no spectacular jumps in productivity. ... Cybernation had proved to be one more instance of the penchant for overdramatizing a momentary innovation and blowing it up far out of proportion to its actuality. ... The image of a completely automated production economy—with an endless capacity to turn out goods—was simply a social-science fiction of the early 1960s. Paradoxically, the vision of Utopia was suddenly replaced by the spectre of Doomsday. In place of the early-sixties theme of endless plenty, the picture by the end of the decade was one of a fragile planet of limited resources whose finite stocks were being rapidly depleted, and whose wastes from soaring industrial production were polluting the air and waters." In his 2015 book Rise of the Robots, Martin Ford claims The Triple Revolution's predictions of steady decline in future employment were not wrong, but rather premature. He cites "Seven Deadly Trends" that began in the 1970s-1980s and by the mid-2010s appeared set to continue: Stagnation in real wages Decline in labor's share of national income in many countries (breakdown of Bowley's law), while corporate profits increased Declining labor force participation Diminishing job creation, lengthening jobless recoveries, and soaring long-term unemployment Rising inequality Declining incomes, and underemployment for recent college graduates Polarization and part-time jobs (middle-class jobs are disappearing, to be replaced by a small number of high-paying jobs and large number of low-paying jobs) According to Ford, the 1960s were part of what in retrospect seems like a golden age for labor in the United States, when productivity and wages rose together in near lockstep, and unemployment was low. But after about 1980, wages began stagnating while productivity continued to rise. Labor's share of the economic output began to decline. Ford describes the role that automation and information technology play in these trends, and how new technologies including narrow AI threaten to destroy jobs faster than displaced workers can be retrained for new jobs, before automation takes the new jobs as well. This includes many job categories, such as in transportation, that were never threatened by automation before. According to a 2013 study, about 47% of US jobs are susceptible to automation. == Signatories ==

  Read more →
• 

  VibeOS

  VibeOS is an operating system built from scratch entirely by generative artificial intelligence, using code produced through prompts to Claude (vibe coding). It is capable of running on QEMU and was successfully tested on a Raspberry Pi Zero. It has been released under the MIT license. == Features == === Core === Custom kernel with cooperative multitasking (preemptive backup) FAT32 filesystem with long filename support Memory allocator, process scheduler, interrupt handling GIC-400 (QEMU) and BCM2836/BCM2835 (Pi) interrupt controllers Configurable boot (splash screen, boot target) === GUI === Desktop environment with draggable windows Menu bar, dock, window minimize/maximize/close Mouse and keyboard input Modern macOS-inspired aesthetic === Networking === Full TCP/IP stack (Ethernet, ARP, IP, ICMP, UDP, TCP) DNS resolver HTTP client TLS 1.2 with HTTPS support === Apps === Web browser with HTML/CSS rendering Terminal emulator with readline-style shell Text editor (vim clone) with syntax highlighting File manager with drag-and-drop Music player (MP3/WAV) Calculator, system monitor VibeCode IDE Doom port === Development === TCC (Tiny C Compiler) - compile C programs directly on VibeOS MicroPython interpreter with full kernel API bindings 60+ userspace programs (coreutils, games, GUI apps) === Hardware === Runs on Raspberry Pi Zero 2W USB keyboard and mouse via DWC2 driver SD card via EMMC driver 1920×1080 framebuffer == Further projects == There are other independent projects under the VibeOS name, including an independent development by Ben, also developed using vibe coding, aimed at creating a Unix-like operating system for educational purposes. Another project is Vib-OS, an operating system also built using vibe coding, capable of booting on a Raspberry Pi. It offers a desktop environment with a customizable wallpaper, a file manager, and a web browser currently in an early stage of development, a functional Doom port, among other features that are not very polished given the state of development.

  Read more →
• 

  Deconfliction line

  A deconfliction line is an official line of communications established between militaries who are or could be hostile, to avoid dangerous misunderstandings and miscalculations based on ignorance. The ultimate aim is to avoid accidents and conflict escalation. In the 2010s and 2020s, the US and Russia set up deconfliction lines during the Syrian civil war and Russo-Ukrainian War. They were regularly tested by military staff, and used by air traffic controllers and senior military officers. They were used to avoid midair collisions between aircraft in the same or adjacent airspace, and sometimes to give warning of airstrikes. In April 2017, Russia severed the Syrian line in retaliation for a called strike.

  Read more →
• 

  Webby Awards

  The Webby Awards (colloquially referred to as the Webbys) are awards for excellence on the Internet presented annually by the International Academy of Digital Arts and Sciences, a judging body composed of over three thousand industry experts and technology innovators. Categories include websites, advertising and media, online film and video, mobile sites and apps, and social. Two winners are selected in each category, one by members of The International Academy of Digital Arts and Sciences, and one by the public who cast their votes during Webby People's Voice voting. Each winner presents a five-word acceptance speech, a trademark of the annual awards show. In its early years, the award was hailed as the "Internet's highest honor" and was associated with the phrase "The Oscars of the Internet." == History == In its early years, the organization was one of several vying to be the premiere internet awards show. Both shows would compare themselves to the Oscars, as did media outlets such as The New York Times to Canada's Globe & Mail. The winners of the First Annual Webby Awards in 1995 were presented by John Brancato and Michael Ferris, writers for Columbia Pictures. It was held at the Hollywood Roosevelt Hotel. The televised Webby Awards were sponsored by the Academy of Web Design and Cool Site of the Day. The first Webby Awards were produced by Kay Dangaard at the Hollywood Roosevelt Hotel as a nod to the first site of the Academy of Motion Picture Arts and Sciences (Oscars). That first year, they were called "Webbie" Awards. The first "Site of the Year" winner was the pioneer webisodic serial The Spot. The modern Webby Awards were co-founded by Tiffany Shlain, a filmmaker, when she was hired by The Web Magazine to re-establish them, and were first held in San Francisco in 1997. They quickly became known for its requirement that winners give their acceptance speeches in five words. After this, the awards became more successful than the magazine and IDG closed the publication. Shlain and co-founder Maya Draisin Farrah continued to run The Webby Awards until 2004. The International Academy of Digital Arts and Sciences, which selects the winners of The Webby Awards, was established in 1998 by co-founders Tiffany Shlain, Spencer Ante and Maya Draisin. Members of the Academy include Kevin Spacey, Grimes, Questlove, Internet inventor Vint Cerf, Instagram's Head of Fashion Partnerships Eva Chen, comedian Jimmy Kimmel, Twitter founder Biz Stone, Vice Media co-founder and CEO Shane Smith, Tumblr's David Karp, Director of Harvard's Berkman Klein Center for Internet & Society Susan P. Crawford, Refinery29's Executive Creative Director Piera Gelardi, and CEO and co-founder of Gimlet Media Alex Blumberg. The Webby Awards is owned and operated by the Webby Media Group, a division of Recognition Media, which also owns and produces the Lovie Awards in Europe and Netted by the Webbys, a daily email publication launched in 2009. David-Michel Davies, CEO of Webby Media Group, current Executive Director of the Webby Awards and co-founder of Internet Week New York, was named Executive Director of the Webby Awards in 2005. In 2009, the 13th Annual Webby Awards received nearly 10,000 entries from all 50 US states and over 60 countries. That same year, more than 500,000 votes were cast in The Webby People's Voice Awards. In 2012, the 16th Annual Webby awards received 1.5 million votes from more than 200 countries for the People's Voice awards. In 2015, the 19th Annual Webby Awards received nearly 13,000 entries from all 50 U.S. states and over 60 countries worldwide. == Nomination process == The 2000 awards began the transition to nominee submissions. Previously, nominees had been selected by an internal committee. As early as 2017, organizations wanting to nominate themselves were charged $395 for a single entry. An "ad campaign entry" would cost $595. By 2024, those fees had risen to $495 and $675, respectively. Executive Academy Members with category-specific expertise evaluate the shortlisted entries based on the appropriate Website, Advertising & Media, Online Film & Video, Mobile Sites & Apps, and Social category criteria, and cast ballots to determine Webby Honorees, Nominees and Webby Winners. Deloitte provides vote tabulation consulting for the Webby Awards. In addition to the award given in each category by the International Academy of Digital Arts and Sciences, another winner is selected in each category as determined by the general public during People's Voice voting. Winners of both the Academy-selected and People's Voice-selected awards are invited to the Webbys. == Awards granted == The Webby Awards are presented in over a hundred categories among all four types of entries. A website can be entered in multiple categories and receive multiple awards. In each category, two awards are handed out: a Webby Award selected by The International Academy of Digital Arts and Sciences, and a People's Voice Award selected by the general public. == Ceremony == Between 2005 and 2019, the Webby Awards were presented in New York City. Many of the ceremony hosts are comedians and comedic actors. Comedian Rob Corddry hosted the ceremony from 2005 to 2007. Seth Meyers of Saturday Night Live hosted in 2008 and 2009, B.J. Novak of the sitcom The Office in 2010, and Lisa Kudrow in 2011. Comedian, actor, and writer Patton Oswalt hosted from 2012 to 2014. Comedian Hannibal Buress hosted in 2015. The Webbys are famous for limiting recipients to five-word speeches, which are often humorous, although some exceed the limit. In 2005 when accepting his Lifetime Achievement Award, former Vice President Al Gore's speech was "Please don't recount this vote." He was introduced by Vint Cerf who used the same format to state, "We all invented the Internet." In 2013, the creator of the Graphics Interchange Format (GIF), Steve Wilhite, accepted his Webby and delivered his now famous five-word speech, "It's pronounced 'Jif' not 'Gif'." == Criticism == The Webbys have been criticized for their pay-to-enter and pay-to-attend policy (winners and nominees also have to pay to attend the award ceremony), and thus for not taking most websites into consideration before distributing their awards. Gawker, its Valleywag column, and others, have called the awards a scam, with Valleywag saying, "...somewhere along the way, the organizers figured out that this goofy charade could be milked for profit." In response, Webby Awards executive director David-Michel Davies told the Wall Street Journal that entry fees "provide the best and most sustainable model for ensuring that our judging process remains consistent and rigorous and is not dependent on things like sponsorships that can fluctuate from year to year." == Anthem Awards == In 2021, the Webby organization started a new line of awards, the Anthem Awards, to honor the purpose and mission-driven work of people, companies and organizations worldwide. The finalists and winners are selected by the International Academy of Digital Arts and Sciences.

  Read more →
• 

  Language identification

  In natural language processing, language identification or language guessing is the problem of determining which natural language a given content is in. Computational approaches to this problem view it as a special case of text categorization, solved with various statistical methods. == Overview == === Logical approach === A common non-statistical intuitive approach (though highly uncertain) is to look for common letter combinations, or distinctive diacritics or punctuation. === Statistical approach === There are several statistical approaches to language identification. An older statistical method by Grefenstette was based on the frequency of short n-grams, which are often function morphemes. For example, "ing" is more common in English than in French, while the sequence "que" is more common in French. Given a new page found on the Web, one counts the number of occurrences of each such short sequence and picks the language whose frequency table it matches the most. One technique is to compare the compressibility of the text to the compressibility of texts in a set of known languages. This approach is known as mutual information based distance measure. The same technique can also be used to empirically construct family trees of languages which closely correspond to the trees constructed using historical methods. Mutual information based distance measure is essentially equivalent to more conventional model-based methods and is not generally considered to be either novel or better than simpler techniques. Another technique, as described by Cavnar and Trenkle (1994) and Dunning (1994) is to create a language n-gram model from a "training text" for each of the languages. These models can be based on characters (Cavnar and Trenkle) or encoded bytes (Dunning); in the latter, language identification and character encoding detection are integrated. Then, for any piece of text needing to be identified, a similar model is made, and that model is compared to each stored language model. The most likely language is the one with the model that is most similar to the model from the text needing to be identified. This approach can be problematic when the input text is in a language for which there is no model. In that case, the method may return another, "most similar" language as its result. Also problematic for any approach are pieces of input text that are composed of several languages, as is common on the Web. As of 2025, a commonly used baseline method is via the fastText library, which has comparable classification accuracy as deep learning techniques, but much faster. == Identifying similar languages == One of the great bottlenecks of language identification systems is to distinguish between closely related languages. Similar languages like Bulgarian and Macedonian or Indonesian and Malay present significant lexical and structural overlap, making it challenging for systems to discriminate between them. In 2014 the DSL shared task has been organized providing a dataset (Tan et al., 2014) containing 13 different languages (and language varieties) in six language groups: Group A (Bosnian, Croatian, Serbian), Group B (Indonesian, Malaysian), Group C (Czech, Slovak), Group D (Brazilian Portuguese, European Portuguese), Group E (Peninsular Spanish, Argentine Spanish), Group F (American English, British English). The best system reached performance of over 95% results (Goutte et al., 2014). Results of the DSL shared task are described in Zampieri et al. 2014. == Software == Apache OpenNLP includes char n-gram based statistical detector and comes with a model that can distinguish 103 languages Apache Tika contains a language detector for 18 languages

  Read more →
• 

  History of RISC OS

  RISC OS, the computer operating system developed by Acorn Computers for their ARM-based Acorn Archimedes range, was originally released in 1987 as Arthur 0.20, and soon followed by Arthur 0.30, and Arthur 1.20. The next version, Arthur 2, became RISC OS 2 and was completed in September 1988 and made available in April 1989. RISC OS 3 was released with the very earliest version of the A5000 in 1991 and contained a series of new features. By 1996 RISC OS had been shipped on over 500,000 systems. RISC OS 4 was released by RISCOS Ltd (ROL) in July 1999, based on the continued development of OS 3.8. ROL had in March 1999 licensed the rights to RISC OS from Element 14 (the renamed Acorn) and eventually from the new owner, Pace Micro Technology. According to the company, over 6,400 copies of OS 4.02 on ROM were sold up until production was ceased in mid-2005. RISC OS Select was launched in May 2001 by ROL. This is a subscription scheme allowing users access to the latest OS updates. These upgrades are released as soft-loadable ROM images, separate to the ROM where the boot OS is stored, and are loaded at boot time. Select 1 was shipped in May 2002, with Select 2 following in November 2002 and the final release of Select 3 in June 2004. ROL released the ROM based OS 4.39 the same month, dubbed RISC OS Adjust as a play on the RISC OS GUI convention of calling the three mouse buttons 'Select', 'Menu' and 'Adjust'. ROL sold its 500th Adjust ROM in early 2006. RISC OS 5 was released in October 2002 on Castle Technology's Acorn clone Iyonix PC. OS 5 is a separate evolution based upon the NCOS work done by Pace for set-top boxes. In October 2006, Castle announced a source sharing license plan for elements of OS 5. This Shared Source Initiative (SSI) is managed by RISC OS Open Ltd (ROOL). RISC OS 5 has since been released under a fully free and open source Apache 2.0 license, while the older no longer maintained RISC OS 6 has not. RISC OS Six was also announced in October 2006 by ROL. This is the next generation of their stream of the operating system. The first product to be launched under the name was the continuation of the Select scheme, Select 4. A beta-version of OS 6, Preview 1 (Select 4i1), was available in 2007 as a free download to all subscribers to the Select scheme, while in April 2009 the final release of Select 5 was shipped. The latest release of RISC OS from ROL is Select 6i1, shipped in December 2009. == Arthur == The OS was designed in the United Kingdom by Acorn for the 32-bit ARM based Acorn Archimedes, and released in its first version in 1987, as the Arthur operating system. The first public release of the OS was Arthur 1.20 in June 1987. It was bundled with a desktop graphical user interface (GUI), which mostly comprises assembly language software modules, and the Desktop module itself being written in BBC BASIC. It features a colour-scheme typically described as "technicolor". The graphical desktop runs on top of a command-line driven operating system which owes much to Acorn's earlier MOS operating system for its BBC Micro range of 8-bit microcomputers. Arthur, as originally conceived, was intended to deliver similar functionality to the operating system for the BBC Master series of computers, MOS, as a reaction to the fact that a more advanced operating system research project (ARX) would not be ready in time for the Archimedes. The Arthur project team, led by Paul Fellows, was given just five months to develop it entirely from the ground up—with the directive "just make it like the BBC micro". It was intended as a stop-gap until the operating system which Acorn had under development (ARX) could be completed. However, the latter was delayed time and again, and was eventually dropped when it became apparent that the Arthur development could be extended to have a window manager and full desktop environment. Also, it was small enough to run on the first 512K machines with only a floppy disc, whereas ARX required 4 megabytes and a hard drive. The OS development was carried out using a prototype ARM-based system connected to a BBC computer, before moving onto the prototype Acorn Archimedes the A500. Arthur was not a multitasking operating system, but offered support for adding application-level cooperative multitasking. No other version of the operating system was released externally, but internally the development of the desktop and window management continued, with the addition of a cooperative multitasking system, implemented by Neil Raine, which used the memory management hardware to swap-out one task, and bring in another between call-and-return from the Wimp_Poll call that applications were obliged to make to get messages under the desktop. Reminiscent of a similar technique employed by MultiFinder on the Apple Macintosh, this transformed a single-application-at-a-time system into one that could operate a full multi-tasking desktop. This transformation took place at version 1.6 though it was not made public until released, with the name change from Arthur to RISC OS, as version 2.0. Most software made for Arthur 1.2 can be run under RISC OS 2 and later because, underneath the desktop, the original Arthur OS core, API interfaces and modular structures remain as the heart of all versions. (A few titles will not work, however, because they used undocumented features, side effects or in a few cases APIs that became deprecated). In 2011, Business Insider listed Arthur as one of ten "operating systems that time forgot". == RISC OS 2 == RISC OS was a rapid development of Arthur 1.2 after the failure of the ARX project. Given growing dissatisfaction with various bugs and limitations with Arthur, testing of what was then known as Arthur 2 was apparently ongoing during 1988 with selected software houses. At this stage, Computer Concepts, who had been prolific developers for the BBC Micro and who had begun software development for the Archimedes, had already initiated a rival operating system project, Impulse, to support their own applications (including the desktop publishing application that would eventually become Impression), stating that Arthur did not meet the "hundreds of requirements" involved including "true multi-tasking". Such an operating system was to be offered free of charge with the planned application packages, but with the release of RISC OS and Computer Concepts acknowledging that RISC OS "overcomes the old problems with Arthur", the applications were to be able to run under either RISC OS or Impulse. Impression was eventually released as a RISC OS application. Ultimately, Arthur 2 was renamed to RISC OS, and was first sold as RISC OS 2.00 in April 1989. The operating system implements co-operative multitasking with some limitations but is not multi-threaded. It uses the ADFS file system for both floppy and hard disc access. It ran from a 512 KB set of ROMs. The WIMP interface offers all the standard features and fixes many of the bugs that had hindered Arthur. It lacks virtual memory and extensive memory protection (applications are protected from each other, but many functions have to be implemented as 'modules' which have full access to the memory). At the time of release, the main advantage of the OS was its ROM; it booted very quickly and while it was easy to crash, it was impossible to permanently break the OS from software. Its high performance was due to much of the system being written in ARM assembly language. The OS was designed with users in mind, rather than OS designers. It is organised as a relatively small kernel which defines a standard software interface to which extension modules are required to conform. Much of the system's functionality is implemented in modules coded in the ROM, though these can be supplanted by more evolved versions loaded into RAM. Among the kernel facilities are a general mechanism, named the callback handler, which allows a supervisor module to perform process multiplexing. This facility is used by a module forming part of the standard editor program to provide a terminal emulator window for console applications. The same approach made it possible for advanced users to implement modules giving RISC OS the ability to do pre-emptive multitasking. A slightly updated version, RISC OS 2.01, was released later to support the ARM3 processor, larger memory capacities, and the VGA and SVGA modes provided by the Acorn Archimedes 540 and Acorn R225/R260. == RISC OS 3 == RISC OS 3 introduced a number of new features, including multitasking Filer operations, applications and fonts in ROM, no limit on number of open windows, ability to move windows off screen, safe shutdown, the Pinboard, grouping of icon bar icons, up to 128 tasks, native ability to read MS-DOS format discs and use named hard discs. Improved configuration was also included, by way of multiple windows to change the settings. RISC OS 3.00 was released with the very earliest version of the A5000 in 1991; it is almo

  Read more →
• 

  Svelte

  Svelte is a free and open-source component-based front-end software framework and language created by Rich Harris and maintained by the Svelte core team. Svelte is not a monolithic JavaScript library imported by applications: instead, Svelte compiles HTML templates to specialized code that manipulates the DOM directly, which may reduce the size of transferred files and give better client performance. Application code is also processed by the compiler, inserting calls to automatically recompute data and re-render UI elements when the data they depend on is modified. This also avoids the overhead associated with runtime intermediate representations, such as virtual DOM, unlike traditional frameworks (such as React and Vue) which carry out the bulk of their work at runtime, i.e. in the browser. The compiler itself is written in JavaScript. Its source code is licensed under MIT License and hosted on GitHub. Among comparable frontend libraries, Svelte has one of the smallest bundle footprints at merely 2KB. == History == The predecessor of Svelte is Ractive.js, which Rich Harris created in 2013. Version 1 of Svelte was written in JavaScript and was released on 29 November 2016. The name Svelte was chosen by Rich Harris and his coworkers at The Guardian. Version 2 of Svelte was released on 19 April 2018. It set out to correct what the maintainers viewed as mistakes in the earlier version such as replacing double curly braces with single curly braces. Version 3 of Svelte was written in TypeScript and was released on 21 April 2019. It rethought reactivity by using the compiler to instrument assignments behind the scenes. The SvelteKit web framework was announced in October 2020 and entered beta in March 2021. SvelteKit 1.0 was released in December 2022 after two years in development. Version 4 of Svelte was released on 22 June 2023. It was a maintenance release, smaller and faster than version 3. A part of this release was an internal rewrite from TypeScript back to JavaScript, with JSDoc type annotations. This was met with confusion from the developer community, which was addressed by the creator of Svelte, Rich Harris. Version 5 of Svelte was released on October 19, 2024 at Svelte Summit Fall 2024 with Rich Harris cutting the release live while joined by other Svelte maintainers. Svelte 5 was a ground-up rewrite of Svelte, changing core concepts such as reactivity and reusability. Its primary feature, runes, reworked how reactive state is declared and used. Runes are function-like macros that are used to declare a reactive state, or code that uses reactive states. These runes are used by the compiler to indicate values that may change and are depended on by other states or the DOM. Svelte 5 also introduces Snippets, which are reusable "snippets" of code that are defined once and can be reused anywhere else in the component. Svelte 5 was initially met with controversy due to its many changes, and thus deprecations caused primarily by runes. However, most of this has subsided since the initial announcement of runes, and the further refining of Svelte 5. Also at Svelte Summit Fall 2024, Ben McCann announced the Svelte CLI under the sv package name on npm. In early 2025, the Svelte team announced Asynchronous Svelte, an experimental feature set centered around asynchronous reactivity in Svelte using await expressions. As of August 2025, the feature is available via an experimental compiler option. This coincided with the experimental release of remote functions, an RPC feature in SvelteKit, Svelte's metaframework. Key early contributors to Svelte became involved with Conduitry joining with the release of Svelte 1, Tan Li Hau joining in 2019, and Ben McCann joining in 2020. Rich Harris and Simon Holthausen joined Vercel to work on Svelte fulltime in 2022. Dominic Gannaway joined Vercel from the React core team to work on Svelte fulltime in 2023. == Syntax == Svelte applications and components are defined in .svelte files, which are HTML files extended with templating syntax that is based on JavaScript and is similar to JSX. Svelte's core features are accessed through runes, which syntactically look like functions, but are used as macros by the compiler. These runes include: The $state rune, used for declaring a reactive state value The $derived rune, used for declaring reactive state derived from one or more states The $effect rune, used for declaring code that reruns whenever its dependencies change Starting with Svelte 5, the framework introduced a significant reactivity overhaul that replaces the previous `$:` reactive declarations with new runes such as $state, $derived, and $effect. The $effect rune is now used for post-render operations without modifying state, while $derived is used for computations that depend on other reactive values. This change aims to simplify the mental model of reactivity and make component logic more explicit. Additionally, the { JavaScript code } syntax can be used for templating in HTML elements and components, similar to template literals in JavaScript. This syntax can also be used in element attributes for uses such as two-way data binding, event listeners, and CSS styling. A Todo List example made in Svelte is below: == Associated projects == The Svelte maintainers created SvelteKit as the official way to build projects with Svelte. It is a Next.js/Nuxt-style full-stack framework that dramatically reduces the amount of code that gets sent to the browser. The maintainers had previously created Sapper, which was the predecessor of SvelteKit. The Svelte maintainers also maintain a number of integrations for popular software projects under the Svelte organization including integrations for Vite, Rollup, Webpack, TypeScript, VS Code, Chrome Developer Tools, ESLint, and Prettier. A number of external projects such as Storybook have also created integrations with Svelte and SvelteKit. == Influence == Vue.js modeled its API and single-file components after Ractive.js, the predecessor of Svelte. == Adoption == Svelte is widely praised by developers. Taking the top ranking in multiple large scale developer surveys, it was chosen as the Stack Overflow 2021 most loved web framework and 2020 State of JS frontend framework with the most satisfied developers. Recent surveys continue to show Svelte's strong developer satisfaction, with the 2024 State of JS survey maintaining its position among the most praised frontend frameworks. The 2024 Stack Overflow Developer Survey reported that 73% of developers who used Svelte want to continue working with it, and noted that Stack Overflow's own team used Svelte for building their 2024 Developer Survey results site. Svelte has been adopted by a number of high-profile web companies including The New York Times, Google, Apple, Spotify, Radio France, Square, Yahoo, ByteDance, Rakuten, Bloomberg, Reuters, Ikea, Facebook, Logitech, and Brave. A community group of primarily non-maintainers, known as the Svelte Society, run the Svelte Summit conference, write a Svelte newsletter, host a Svelte podcast, and host a directory of Svelte tooling, components, and templates.

  Read more →
• 

  Web series

  A web series, also known as a short-form series or web show, is a collection of short scripted or unscripted online videos released on the Internet (i.e., World Wide Web), generally in episodic form. A single installment of a web series can be called a webisode or an episode. The scale of a web series is small, and a typical episode can be anywhere from 3 to 15 minutes long (though some may run up to 20 minutes). Web series first emerged in the mid-1990s and became more prominent in the early 2000s. Web series are distributed online on video-sharing websites and apps, such as YouTube, Vimeo, and TikTok, and can be watched on devices such as smartphones, tablets, desktops, laptops, and Smart TVs (or television sets connected to the Internet with a media streaming device). They can also be released on social media platforms. Because of the nature of the Internet, a web series may be interactive and immersive. Web series are classified as new media. Web series are different from streaming television series, as the latter are designed to be watched on streaming platforms such as Netflix, Amazon Prime Video, or Hotstar, with the streaming services offering original productions made for and by them, as well as acquiring the rights to distribute licensed content. The length of a streaming television series episode is 30 to 60 minutes (runtimes can also be longer). Although the design of a web series can be similar to that of a television series, its development and production do not entail the same financial investment required for a television series. The popularity of some web series, however, has led to them being optioned for television. Web series differ from short-form content in that the latter are vertical videos specifically designed for smartphone viewing and intended for fast-paced consumption, with runtimes typically ranging from less than one minute to three minutes. There are film festivals for web series, like Webfest Berlin, NYC Web Fest, LA Web Fest, and Vancouver Web Fest. Awards organizations have also been established to celebrate excellence in web series, such as the Streamys, Webbys, IAWTV Awards, and Indie Series Awards. Most major award ceremonies have also created web series and digital media award categories, including the Emmy Awards and the Canadian Screen Awards. == History == === 1990s === In April 1995, "Global Village Idiots", an episode of the reality-based program Rox on public access cable television in Bloomington, Indiana, was uploaded to the Internet, making Rox the first show distributed via the web. The same year, Scott Zakarin created The Spot, an episodic online story that integrated photos, videos, and blogs into the storyline. Likened to Melrose Place-on-the-Web, The Spot featured a rotating cast of characters playing trendy twenty-somethings who rented rooms in a fabled Santa Monica, California beach house called "The Spot". The Spot earned Infoseek's "Cool Site of the Year," an award which later became the Webby. In January 1999, Showtime licensed the animated sci-fi web series WhirlGirl, making it the first independently produced web series licensed by a national television network. In February 1999, the show premiered simultaneously on Showtime and online. The character occasionally appeared on Showtime, for example, hosting a "Lethal Ladies" programming block, but spent most of her time online, appearing in 100 webisodes. === 2000s === As broadband bandwidth increased in speed and availability, delivering high-quality video over the Internet became a reality. In the early 2000s, the Japanese anime industry began broadcasting original net animation (ONA), a type of original video animation (OVA) series, on the Internet. Early examples of the ONA series include Infinite Ryvius: Illusion (2000), Ajimu (2001), and Mahou Yuugi (2001). In 2000, The Brothers Chaps launched the Adobe Flash-created web series Homestar Runner. After being put on hiatus in 2010, it returned in 2014. In 2002, Matt Jolly (better known as "Krinkels") released the first episode of Madness Combat to Newgrounds. The show is still ongoing, with the latest episode "Madness Combat 12: Contravention" released on Twitch in September 2024. In 2003, Microsoft launched MSN Video, offering NBC-related content. Its web series, Weird TV 2000, a spin-off of the syndicated television series Weird TV, featured dozens of shorts, comedy sketches, and mini-documentaries produced exclusively for MSN Video. The video-sharing site YouTube was launched in early 2005, allowing users to share television programs. YouTube co-founder Jawed Karim said the inspiration for YouTube first came from Janet Jackson's role in the 2004 Super Bowl incident, when her breast was exposed during her performance, and later from the 2004 Indian Ocean tsunami. Karim could not easily find video clips of either event online, which led to the idea of a video-sharing site. From 2003 to 2006, many independent web series gained significant popularity, most notably the science fiction series Red vs. Blue by Rooster Teeth. The series was distributed independently via online portals YouTube and Revver, as well as the Rooster Teeth website, acquiring over 100 million social media views during its run. (Rooster Teeth would eventually create the computer-animated web series RWBY in 2013.) In 2004, the adult-animated series Salad Fingers was created, which amassed a cult following. The comedy show The Burg, hailed as the internet's first sitcom and starring Kelli Giddish and Lindsey Broad, rapidly gained an audience and press attention before its creators signed a creation deal with Michael Eisner. The drama Sam Has 7 Friends, which ran in the summer and fall of 2006, was nominated for a Daytime Emmy Award and was temporarily removed from the Internet when it was also acquired by Eisner. In 2004–2005, Spanish producer Pedro Alonso Pablos recorded a series of video interviews featuring actors and directors such as Guillermo del Toro, Santiago Segura, Álex de la Iglesia, and Keanu Reeves, which were distributed through his own website. lonelygirl15, California Heaven, "The Burg", and SamHas7Friends also gained popularity during this time, acquiring audiences in the millions. (Science fiction thriller lonelygirl15 was so successful that it secured a sponsorship deal with Neutrogena in 2007.) In 2004, Stewart St. John, executive producer and head writer of 1990s webisodies The Spot, revived the brand for online audiences as The Spot (2.0), with a new cast, and as a separate soap opera on Sprint PCS Vision-enabled cell phones, creating the first American mobile phone series. St. John and partner Todd Fisher produced over 2,500 daily videos of the mobile soap, driving story lines across platforms to its web counterpart. In 2007, the creators of lonelygirl15 followed up on the show's success with KateModern, a comedy-drama series that debuted on social network Bebo, and took place in the same fictional universe as their previous show. Big Fantastic created and produced the soap opera Prom Queen, financed and distributed by Michael Eisner's production firm Vuguru, and debuted the series on MySpace. Vuguru partnered with Mark Cuban's channel HDNet to release All-for-nots, a mockumentary series by The Burg creators Kathleen Grace and Thom Woodley, which debuted at the SXSW Festival in 2008. These web series highlighted interactivity with the audience in addition to the narrative on relatively low budgets. In contrast, the eight-episode show Sanctuary, starring actor/producer Amanda Tapping, cost $4.3 million to produce. Both Sanctuary and Prom Queen were nominated for a Daytime Emmy Award. Award-winning producer/director Marshall Herskovitz created the drama Quarterlife, which debuted on MySpace and was later distributed on NBC. In 2008, major television studios began releasing web series, such as the ABC comedy show Squeegies, the NBC sci-fi show Gemini Division, and the Bravo reality series The Malan Show. Warner Bros. relaunched The WB as an online network beginning with original mystery web series, Sorority Forever, created and produced by Big Fantastic and executive produced by McG. Meanwhile, MTV announced a new original web series created by Craig Brewer, $5 Cover, that brought together the indie music world and new media expansion. Joss Whedon created, produced, and self-financed musical comedy-drama Dr. Horrible's Sing-Along Blog starring Neil Patrick Harris and Felicia Day. Big Fantastic wrote and produced Foreign Body, a mystery web series that served as a prequel to Robin Cook's novel of the same name. Beckett and Goodfried founded a new Internet studio, EQAL, and produced a spin-off of lonelygirl15 titled LG15: The Resistance. The mainstream press began to provide coverage. In the United Kingdom, KateModern ended its run on Bebo. Bebo also hosted a six-month-long reality travel show, The Gap Year, produced by Endemol UK, and produced an interactive sci-fi drama Kirill for

  Read more →
• 

  Outlook on the web

  Outlook on the web (formerly Outlook Web App and Outlook Web Access) is a personal information manager web app from Microsoft. It is a web-based version of Microsoft Outlook, and is included in Exchange Server and Exchange Online (a component of Microsoft 365). It can be freely accessed from any web browser whether inside or outside an organization's network, and includes a web email client, a calendar tool, a contact manager, and a task manager. It also includes add-in integration, Skype on the web, and alerts as well as unified themes that span across all the web apps. == Purpose == Outlook on the web is available to Microsoft 365 (formerly Office 365) and Exchange Online subscribers, and is included with the on-premises Exchange Server, to enable users to connect to their email accounts via a web browser, without requiring the installation of Microsoft Outlook or other email clients. In case of Exchange Server, it is hosted on a local intranet and requires a network connection to the Exchange Server for users to work with e-mail, address book, calendars and task. The Exchange Online version, which can be bought either independently or through Office 365 licensing program, is hosted on Microsoft servers on the World Wide Web. == History == Outlook Web Access was created in 1995 by Microsoft Program Manager Thom McCann on the Exchange Server team. An early working version was demonstrated by Microsoft Vice President Paul Maritz at Microsoft's famous Internet summit in Seattle on December 27, 1995. The first customer version was shipped as part of the Exchange Server 5.0 release in early 1997. The first component to allow client-side scripts to issue HTTP requests (XMLHTTP) was originally written by the Outlook Web Access team. It soon became a part of Internet Explorer 5. Renamed XMLHttpRequest and standardized by the World Wide Web Consortium, it has since become one of the cornerstones of the Ajax technology used to build advanced web apps. Outlook Web Access was later renamed Outlook Web App in 2010. An update on August 4, 2015, renamed OWA to "Outlook on the web", often referred to in brief as simply "Outlook". == Components == === Mail === Mail is the webmail component of Outlook on the web. The default view is a three column view with folders and groups on the left, an email message list in the middle, and the selected message on the right. With the 2015 update, Microsoft introduced the ability to pin, sweep and archive messages, and undo the last action, as well as richer image editing features. It can connect to other services such as GitHub and Twitter through Office 365 Connectors. Actionable Messages in emails allows a user to complete a task from within the email, such as retweeting a Tweet on Twitter or setting a meeting date on a calendar. Outlook on the web supports S/MIME and includes features for managing calendars, contacts, tasks, documents (used with SharePoint or Office Web Apps), and other mailbox content. In the Exchange 2007 release, Outlook on the web (still called Outlook Web App at the time) also offers read-only access to documents stored in SharePoint sites and network UNC shares. === Calendar === Calendar is the calendaring component of Outlook on the web. With the update, Microsoft added a weather forecast directly in the Calendar, as well as icons (or "charms") as visual cues for an event. In addition, email reminders came to all events, and a special Birthday and Holiday event calendars are created automatically. Calendars can be shared and there are multiple views such as day, week, month, and today. Another view is work week which includes Mondays through Fridays in the calendar view. Calendar's "Board View" feature allows for a customizable calendar with widgets such as Goal, Calendar, Tasks and Tips. Calendar details can be added with HTML and rich-text editing, and files can be attached to calendar events and appointments. === People === People is the contact manager component of Outlook on the web. A user can search and edit existing contacts, as well as create new ones. Contacts can be placed into folders and duplicate contacts can be linked from multiple sources such as LinkedIn or Twitter. In Outlook Mail, a contact can be created by clicking on an email address sender, which pulls down a contact card with an add button to add to Outlook People. Contacts can be imported as well as placed into a list that can be utilized when composing an email in Outlook Mail. People can also sync with friends and connections lists on LinkedIn, Facebook, and Twitter. === To Do === To Do was originally launched as Tasks for Outlook Web App. Microsoft was slowly rolling out a preview of Tasks to its consumer-based Outlook.com service that in May 2015, was announced to be moving to the Office 365 infrastructure. It was initially a part of Calendar as a view. Microsoft has separated the services into its own web app in Outlook on the web. In a post on the Office Blogs in 2015, Microsoft announced that Outlook Web App would be renamed Outlook on the web and that Tasks would move under that brand. A user can create tasks, put them into categories, and move them to another folder. A feature added was the ability to set due days and sort and filter the tasks according to those criteria. The app provides the user with fields such as subject, start and end dates, percent complete, priority, and how much work was put into each task. Rich editing features like bold, italic, underline, numbering, and bullet points were also introduced. Tasks can be edited and categorized according to how the user wishes them to be sorted. == Removed features == Outlook on the web has had two interfaces available: one with a complete feature set (known as Premium) and one with reduced functionality (known as Light or sometimes Lite). Prior to Exchange 2010, the Premium client required Internet Explorer. Exchange 2000 and 2003 require Internet Explorer 5 and later, and Exchange 2007 requires Internet Explorer 6 and later. Exchange 2010 supports a wider range of web browsers: Internet Explorer 7 or later, Firefox 3.01 or later, Chrome, or Safari 3.1 or later. However, Exchange 2010 restricts its Firefox and Safari support to macOS and Linux. In Exchange 2013, these browser restrictions were lifted. In Exchange 2010 and earlier, the Light user interface is rendered for browsers other than Internet Explorer. The basic interface did not support search on Exchange Server 2003. In Exchange Server 2007, the Light interface supported searching mail items; managing contacts and the calendar was also improved. The 2010 version can connect to an external email account. The ability to add new accounts to Outlook on the web using the Connected accounts feature was removed in September 2018 and all connected accounts stopped synchronizing email the following month.

  Read more →
• 

  Zero-overhead looping

  In computer architecture, zero-overhead looping is a hardware feature found in some processors that enables loops to execute without the performance cost of traditional loop control instructions. Instead of software managing loop iterations, the processor's hardware handles repetition automatically, saving clock cycles and improving efficiency. This technique is commonly employed in digital signal processors (DSPs) and certain complex instruction set computer (CISC) architectures. == Background == In many instruction sets, a loop must be implemented by using instructions to increment or decrement a counter, check whether the end of the loop has been reached, and if not jump to the beginning of the loop so it can be repeated. Although this typically only represents around 3–16 bytes of space for each loop, even that small amount could be significant depending on the size of the CPU caches. More significant is that those instructions each take time to execute, time which is not spent doing useful work. The overhead of such a loop is apparent compared to a completely unrolled loop, in which the body of the loop is duplicated exactly as many times as it will execute. In that case, no space or execution time is wasted on instructions to repeat the body of the loop. However, the duplication caused by loop unrolling can significantly increase code size, and the larger size can even impact execution time due to cache misses. (For this reason, it's common to only partially unroll loops, such as transforming it into a loop which performs the work of four iterations in one step before repeating. This balances the advantages of unrolling with the overhead of repeating the loop.) Moreover, completely unrolling a loop is only possible for a limited number of loops: those whose number of iterations is known at compile time. For example, the following C code could be compiled and optimized into the following x86 assembly code: == Implementation == Processors with zero-overhead looping have machine instructions and registers to automatically repeat one or more instructions. Depending on the instructions available, these may only be suitable for count-controlled loops ("for loops") in which the number of iterations can be calculated in advance, or only for condition-controlled loops ("while loops") such as operations on null-terminated strings. === Examples === ==== PIC ==== In the PIC instruction set, the REPEAT and DO instructions implement zero-overhead loops. REPEAT only repeats a single instruction, while DO repeats a specified number of following instructions. ==== Blackfin ==== Blackfin offers two zero-overhead loops. The loops can be nested; if both hardware loops are configured with the same "loop end" address, loop 1 will behave as the inner loop and repeat, and loop 0 will behave as the outer loop and repeat only if loop 1 would not repeat. Loops are controlled using the LTx and LBx registers (x either 0 to 1) to set the top and bottom of the loop — that is, the first and last instructions to be executed, which can be the same for a loop with only one instruction — and LCx for the loop count. The loop repeats if LCx is nonzero at the end of the loop, in which case LCx is decremented. The loop registers can be set manually, but this would typically consume 6 bytes to load the registers, and 8–16 bytes to set up the values to be loaded. More common is to use the loop setup instruction (represented in assembly as either LOOP with pseudo-instruction LOOP_BEGIN and LOOP_END, or in a single line as LSETUP), which optionally initializes LCx and sets LTx and LBx to the desired values. This only requires 4–6 bytes, but can only set LTx and LBx within a limited range relative to where the loop setup instruction is located. ==== x86 ==== The x86 assembly language REP prefixes implement zero-overhead loops for a few instructions (namely MOVS/STOS/CMPS/LODS/SCAS). Depending on the prefix and the instruction, the instruction will be repeated a number of times with (E)CX holding the repeat count, or until a match (or non-match) is found with AL/AX/EAX or with DS:[(E)SI]. This can be used to implement some types of searches and operations on null-terminated strings.

  Read more →
• 

  Digital signage

  Digital signage is a segment of electronic signage that uses digital display technologies to present multimedia content in both public and private environments. Content may include video, images, text, or interactive media and is typically displayed for purposes such as advertising, information dissemination, branding, or entertainment. Digital signage systems can be either networked or standalone. Networked systems are managed through centralized content management systems (CMS), often cloud-based, enabling remote updates, scheduling, real-time data integration, and dynamic content delivery. These systems may also incorporate audience analytics, IoT sensors, or AI-driven personalization. Standalone systems, by contrast, operate without a network connection. They rely on local media playback via USB drives, SD cards, or internal storage. These solutions are simpler and suitable for locations where connectivity is limited or content changes infrequently. == Applications of digital signage == Digital signage is widely used in transportation hubs, retail stores, restaurants, corporate buildings, hotels, educational institutions, healthcare facilities, and public spaces. One prominent application of digital signage is Digital Out-of-Home (DOOH) advertising, which leverages digital signage displays in public spaces to deliver targeted advertisements to people outside of their homes. DOOH has become a significant segment of digital signage, providing advertisers with a dynamic and contextually relevant way to engage with audiences. == Components == === Hardware components === Digital signage hardware includes the physical equipment used to show multimedia content in public and private spaces. ==== Display devices ==== Display devices are the most prominent components of a digital signage system, serving as the primary medium for presenting content. Display devices come in various technologies, such as LCD, LED, and OLED formats, each offering different advantages in terms of clarity, color reproduction, and energy efficiency. In addition to flat-panel displays, projectors are also commonly used in digital signage, particularly in large-scale settings. Projectors can cast large-format visuals onto walls, screens, or other surfaces, providing flexibility in display size and positioning. Screen sizes vary widely to suit different applications. Smaller panels are often used in kiosks and point-of-sale systems, while larger displays, such as video walls and projection surfaces, are deployed in venues like stadiums, auditoriums, and other public spaces. Many digital signage displays are also equipped with touchscreen capabilities, allowing for interactive applications. These interactive displays are commonly used in information kiosks, wayfinding systems, and self-service applications. ==== Playback devices ==== Playback devices are specialized hardware components that manage the storage, processing, and transmission of multimedia content to digital signage displays and projectors. They serve as the crucial link between the content management system (CMS) and the visual output, ensuring seamless playback of static images, video files, animated graphics, and real-time content, such as news feeds. Playback devices can be standalone units or integrated into display hardware using System-on-Chip (SoC) technology. The latter reduces hardware complexity and installation time, making the system more efficient. These devices support remote or local content updates, allowing digital signage operators to manage networks effectively. Content can be updated via cloud-based platforms for centralized control or through direct interfaces on-site, depending on the system's configuration and deployment requirements. ==== Mounting systems ==== Mounting systems provide structural support for digital signage displays, enabling deployment across diverse environments. Typical configurations include wall mounts, ceiling mounts, and floor stands each engineered to meet specific spatial and functional requirements. === Software components === Digital signage software is responsible for content creation, scheduling, and management. It enables users to manage and distribute content to one or more playback devices. ==== Software compatibility ==== Digital signage software supports various operating systems, including Android, Windows, Linux, iOS, tvOS, webOS, Tizen, ChromeOS, macOS, and others. This allows customers to choose the hardware and software solution that best suits their digital signage needs. == Interactivity == Interactivity in digital signage allows users to interact directly with displays using input methods like touch, gestures, voice, or proximity sensors. This feature enables real-time responses and personalized content, improving the user experience. Interactive digital signage is commonly used in places like retail, transportation, education, and public spaces to create engaging and informative interactions. Additionally, self-service kiosks are often integrated into interactive signage solutions, allowing users to perform tasks such as ordering products, checking in for flights, accessing information, or making payments. These kiosks empower users to complete transactions or obtain services independently, improving efficiency and convenience in high-traffic locations. == Audience measurement and context-aware content adaptation == === Audience measurement === Cameras can be integrated into digital signage systems to enable audience measurement. They are used to detect and count viewers, estimate demographics such as age and gender, measure dwell time and attention, and sometimes analyze emotional reactions using computer vision techniques. This process is valuable for understanding audience behavior and refining business strategies. Privacy concerns are addressed by anonymizing collected data and avoiding the storage of personally identifiable information. === Context-aware digital signage === Context-aware digital signage refers to systems that adjust content based on environmental or audience data. The infrastructure supporting context awareness, including sensors and analytics systems, also facilitates the collection of audience insights. While these insights may be primarily used for reporting, optimization, or planning future campaigns rather than immediate content adjustments, they play a crucial role in the overall context-aware ecosystem. ==== Contextual information ==== Contextual information in the realm of context-aware digital signage refers to data about the environment, audience, and other factors that influence how digital signage content is displayed. This information helps the system to deliver more relevant, timely, and personalized content to its audience. Contextual information can include, but is not limited to: Audience demographics — this can involve detecting the age, gender, or even emotional state of viewers through cameras or sensors. It helps tailor content to specific audience segments, improving engagement. Time and weather — the system may adjust content based on the time of day or current weather conditions. For example, weather-appropriate content (like a raincoat ad on a rainy day) or time-specific content (like dinner menu promotions in the evening) can be shown. Emergency information — in situations of emergency, systems can prioritize displaying urgent notifications such as fire alerts, disaster warnings, or evacuation instructions. This can be crucial for public safety in crowded environments or densely populated areas. The system may adapt content in real-time to inform and guide individuals to safety, offering location-specific instructions or emergency service contacts. == Challenges == === Display blindness === Digital signage in public spaces has been found to lose visibility, significantly diminishing its ability to capture attention. This issue, known as "Display Blindness", was identified by Müller et al. and refers to the phenomenon where digital advertisements are largely overlooked by passersby. Observations indicate that many of these advertisements fail to resonate with their audience, often being irrelevant or unengaging, which leads to passive reception and reduced interaction. == Comparison with print signage == Digital signage and traditional print signage serve similar purposes by delivering visual information to a target audience, but they differ significantly in terms of flexibility, cost, maintenance, and environmental impact. Digital signage is advantageous in low-light or nighttime environments, where its internal illumination ensures visibility without the need for external lighting, unlike printed signs, which may require additional fixtures to be seen after dark. === Content and flexibility === Digital signage allows for dynamic and real-time content updates, often controlled remotely through content management systems. This makes it well-suited for environments where information chan

  Read more →