AI Coding Meta

AI Coding Meta — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Network Abstraction Layer

  The Network Abstraction Layer (NAL) is a part of the H.264/AVC and HEVC video coding standards. The main goal of the NAL is the provision of a "network-friendly" video representation addressing "conversational" (video telephony) and "non conversational" (storage, broadcast, or streaming) applications. NAL has achieved a significant improvement in application flexibility relative to prior video coding standards. == Introduction == An increasing number of services and growing popularity of high definition TV are creating greater needs for higher coding efficiency. Moreover, other transmission media such as cable modem, xDSL, or UMTS offer much lower data rates than broadcast channels, and enhanced coding efficiency can enable the transmission of more video channels or higher quality video representations within existing digital transmission capacities. Video coding for telecommunication applications has diversified from ISDN and T1/E1 service to embrace PSTN, mobile wireless networks, and LAN/Internet network delivery. Throughout this evolution, continued efforts have been made to maximize coding efficiency while dealing with the diversification of network types and their characteristic formatting and loss/error robustness requirements. The H.264/AVC and HEVC standards are designed for technical solutions including areas like broadcasting (over cable, satellite, cable modem, DSL, terrestrial, etc.) interactive or serial storage on optical and magnetic devices, conversational services, video-on-demand or multimedia streaming, multimedia messaging services, etc. Moreover, new applications may be deployed over existing and future networks. This raises the question about how to handle this variety of applications and networks. To address this need for flexibility and customizability, the design covers a NAL that formats the Video Coding Layer (VCL) representation of the video and provides header information in a manner appropriate for conveyance by a variety of transport layers or storage media. The NAL is designed in order to provide "network friendliness" to enable simple and effective customization of the use of VCL for a broad variety of systems. The NAL facilitates the ability to map VCL data to transport layers such as: RTP/IP for any kind of real-time wire-line and wireless Internet services. File formats, e.g., ISO MP4 for storage and MMS. H.32X for wireline and wireless conversational services. MPEG-2 systems for broadcasting services, etc. The full degree of customization of the video content to fit the needs of each particular application is outside the scope of the video coding standardization effort, but the design of the NAL anticipates a variety of such mappings. Some key concepts of the NAL are NAL units, byte stream, and packet formats uses of NAL units, parameter sets, and access units. A short description of these concepts is given below. == NAL units == The coded video data is organized into NAL units, each of which is effectively a packet that contains an integer number of bytes. The first byte of each H.264/AVC NAL unit is a header byte that contains an indication of the type of data in the NAL unit. For HEVC the header was extended to two bytes. All the remaining bytes contain payload data of the type indicated by the header. The NAL unit structure definition specifies a generic format for use in both packet-oriented and bitstream-oriented transport systems, and a series of NAL units generated by an encoder is referred to as a NAL unit stream. == NAL Units in Byte-Stream Format Use == Some systems require delivery of the entire or partial NAL unit stream as an ordered stream of bytes or bits within which the locations of NAL unit boundaries need to be identifiable from patterns within the coded data itself. For use in such systems, the H.264/AVC and HEVC specifications define a byte stream format. In the byte stream format, each NAL unit is prefixed by a specific pattern of three bytes called a start code prefix. The boundaries of the NAL unit can then be identified by searching the coded data for the unique start code prefix pattern. The use of emulation prevention bytes guarantees that start code prefixes are unique identifiers of the start of a new NAL unit. A small amount of additional data (one byte per video picture) is also added to allow decoders that operate in systems that provide streams of bits without alignment to byte boundaries to recover the necessary alignment from the data in the stream. Additional data can also be inserted in the byte stream format that allows expansion of the amount of data to be sent and can aid in achieving more rapid byte alignment recovery, if desired. == NAL Units in Packet-Transport System Use == In other systems (e.g., IP/RTP systems), the coded data is carried in packets that are framed by the system transport protocol, and identification of the boundaries of NAL units within the packets can be established without use of start code prefix patterns. In such systems, the inclusion of start code prefixes in the data would be a waste of data carrying capacity, so instead the NAL units can be carried in data packets without start code prefixes. == VCL and Non-VCL NAL Units == NAL units are classified into VCL and non-VCL NAL units. VCL NAL units contain the data that represents the values of the samples in the video pictures. Non-VCL NAL units contain any associated additional information such as parameter sets (important header data that can apply to a large number of VCL NAL units) and supplemental enhancement information (timing information and other supplemental data that may enhance usability of the decoded video signal but are not necessary for decoding the values of the samples in the video pictures). == Parameter Sets == A parameter set contains shared configuration data that is carried in non-VCL NAL units. Parameter sets are typically reused when decoding many coded pictures within a video sequence. Each VCL NAL unit references a picture parameter set (PPS), which in turn references a sequence parameter set (SPS). There are two types of parameter sets: Sequence parameter set (SPS), which specifies mostly constant configuration such as resolution, bit depth, or chroma format. (For a concrete implementation, see FFmpeg's SPS struct.) Picture parameter set (PPS), which applies on top of an SPS, and specifies configuration such as QP offsets. (For a concrete implementation, see FFmpeg's PPS struct.) The sequence and picture parameter-set mechanism decouples the transmission of infrequently changing information from the transmission of coded representations of the values of the samples in the video pictures. Each VCL NAL unit contains an identifier that refers to the content of the relevant picture parameter set and each picture parameter set contains an identifier that refers to the content of the relevant sequence parameter set. In this manner, a small amount of data (the identifier) can be used to refer to a larger amount of information (the parameter set) without repeating that information within each VCL NAL unit. Sequence and picture parameter sets can be sent well ahead of the VCL NAL units that they apply to, and can be repeated to provide robustness against data loss. In some applications, parameter sets may be sent within the channel that carries the VCL NAL units (termed "in-band" transmission). In other applications, it can be advantageous to convey the parameter sets "out-of-band" using a more reliable transport mechanism than the video channel itself. == Access Units == A set of NAL units in a specified form is referred to as an access unit. The decoding of each access unit results in one decoded picture. Each access unit contains a set of VCL NAL units that together compose a primary coded picture. It may also be prefixed with an access unit delimiter to aid in locating the start of the access unit. Some supplemental enhancement information containing data such as picture timing information may also precede the primary coded picture. The primary coded picture consists of a set of VCL NAL units consisting of slices or slice data partitions that represent the samples of the video picture. Following the primary coded picture may be some additional VCL NAL units that contain redundant representations of areas of the same video picture. These are referred to as redundant coded pictures, and are available for use by a decoder in recovering from loss or corruption of the data in the primary coded pictures. Decoders are not required to decode redundant coded pictures if they are present. Finally, if the coded picture is the last picture of a coded video sequence (a sequence of pictures that is independently decodable and uses only one sequence parameter set), an end of sequence NAL unit may be present to indicate the end of the sequence; and if the coded picture is the last coded picture in the entire NAL unit stream, an end of stream NAL unit may be present to

  Read more →
• 

  YaDICs

  YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto

  Read more →
• 

  Microscope image processing

  Microscope image processing is a broad term that covers the use of digital image processing techniques to process, analyze and present images obtained from a microscope. Such processing is now commonplace in a number of diverse fields such as medicine, biological research, cancer research, drug testing, metallurgy, etc. A number of manufacturers of microscopes now specifically design in features that allow the microscopes to interface to an image processing system. == Image acquisition == Until the early 1990s, most image acquisition in video microscopy applications was typically done with an analog video camera, often simply closed circuit TV cameras. While this required the use of a frame grabber to digitize the images, video cameras provided images at full video frame rate (25-30 frames per second) allowing live video recording and processing. While the advent of solid state detectors yielded several advantages, the real-time video camera was actually superior in many respects. Today, acquisition is usually done using a CCD camera mounted in the optical path of the microscope. The camera may be full colour or monochrome. Very often, very high resolution cameras are employed to gain as much direct information as possible. Cryogenic cooling is also common, to minimise noise. Often digital cameras used for this application provide pixel intensity data to a resolution of 12-16 bits, much higher than is used in consumer imaging products. Ironically, in recent years, much effort has been put into acquiring data at video rates, or higher (25-30 frames per second or higher). What was once easy with off-the-shelf video cameras now requires special, high speed electronics to handle the vast digital data bandwidth. Higher speed acquisition allows dynamic processes to be observed in real time, or stored for later playback and analysis. Combined with the high image resolution, this approach can generate vast quantities of raw data, which can be a challenge to deal with, even with a modern computer system. While current CCD detectors allow very high image resolution, often this involves a trade-off because, for a given chip size, as the pixel count increases, the pixel size decreases. As the pixels get smaller, their well depth decreases, reducing the number of electrons that can be stored. In turn, this results in a poorer signal-to-noise ratio. For best results, one must select an appropriate sensor for a given application. Because microscope images have an intrinsic limiting resolution, it often makes little sense to use a noisy, high resolution detector for image acquisition. A more modest detector, with larger pixels, can often produce much higher quality images because of reduced noise. This is especially important in low-light applications such as fluorescence microscopy. Moreover, one must also consider the temporal resolution requirements of the application. A lower resolution detector will often have a significantly higher acquisition rate, permitting the observation of faster events. Conversely, if the observed object is motionless, one may wish to acquire images at the highest possible spatial resolution without regard to the time required to acquire a single image. == 2D image techniques == Image processing for microscopy application begins with fundamental techniques intended to most accurately reproduce the information contained in the microscopic sample. This might include adjusting the brightness and contrast of the image, averaging images to reduce image noise and correcting for illumination non-uniformities. Such processing involves only basic arithmetic operations between images (i.e. addition, subtraction, multiplication and division). The vast majority of processing done on microscope image is of this nature. Another class of common 2D operations called image convolution are often used to reduce or enhance image details. Such "blurring" and "sharpening" algorithms in most programs work by altering a pixel's value based on a weighted sum of that and the surrounding pixels (a more detailed description of kernel based convolution deserves an entry for itself) or by altering the frequency domain function of the image using Fourier Transform. Most image processing techniques are performed in the Frequency domain. Other basic two dimensional techniques include operations such as image rotation, warping, color balancing etc. At times, advanced techniques are employed with the goal of "undoing" the distortion of the optical path of the microscope, thus eliminating distortions and blurring caused by the instrumentation. This process is called deconvolution, and a variety of algorithms have been developed, some of great mathematical complexity. The end result is an image far sharper and clearer than could be obtained in the optical domain alone. This is typically a 3-dimensional operation, that analyzes a volumetric image (i.e. images taken at a variety of focal planes through the sample) and uses this data to reconstruct a more accurate 3-dimensional image. == 3D image techniques == Another common requirement is to take a series of images at a fixed position, but at different focal depths. Since most microscopic samples are essentially transparent, and the depth of field of the focused sample is exceptionally narrow, it is possible to capture images "through" a three-dimensional object using 2D equipment like confocal microscopes. Software is then able to reconstruct a 3D model of the original sample which may be manipulated appropriately. The processing turns a 2D instrument into a 3D instrument, which would not otherwise exist. In recent times this technique has led to a number of scientific discoveries in cell biology. == Analysis == Analysis of images will vary considerably according to application. Typical analysis includes determining where the edges of an object are, counting similar objects, calculating the area, perimeter length and other useful measurements of each object. A common approach is to create an image mask which only includes pixels that match certain criteria, then perform simpler scanning operations on the resulting mask. It is also possible to label objects and track their motion over a series of frames in a video sequence.

  Read more →
• 

  List of robotics journals

  List of robotics journals includes notable academic and scientific journals that focus on research in the field of robotics and automation. == Journals == Acta Mechanica et Automatica Advanced Robotics Annual Review of Control, Robotics, and Autonomous Systems IEEE Robotics and Automation Letters IEEE Transactions on Robotics IEEE Transactions on Field Robotics The International Journal of Advanced Manufacturing Technology International Journal of Humanoid Robotics International Journal of Robotics Research Journal of Cognitive Engineering and Decision Making Journal of Field Robotics Journal of Intelligent & Robotic Systems Paladyn Robotics and Autonomous Systems Robotics Science Robotics SLAS Technology

  Read more →
• 

  List of speech recognition software

  Speech recognition software is available for many computing platforms, operating systems, use models, and software licenses. Here is a listing of such, grouped in various useful ways. == Acoustic models and speech corpus (compilation) == The following list presents notable speech recognition software engines with a brief synopsis of characteristics. == Macintosh == == Cross-platform web apps based on Chrome == The following list presents notable speech recognition software that operate in a Chrome browser as web apps. They make use of HTML5 Web-Speech-API. == Mobile devices and smartphones == Many mobile phone handsets, including feature phones and smartphones such as iPhones and BlackBerrys, have basic dial-by-voice features built in. Many third-party apps have implemented natural-language speech recognition support, including: == Windows == === Windows built-in speech recognition === The Windows Speech Recognition version 8.0 by Microsoft comes built into Windows Vista, Windows 7, Windows 8 and Windows 10. Speech Recognition is available only in English, French, Spanish, German, Japanese, Simplified Chinese, and Traditional Chinese and only in the corresponding version of Windows; meaning you cannot use the speech recognition engine in one language if you use a version of Windows in another language. Windows 7 Ultimate and Windows 8 Pro allow you to change the system language, and therefore change which speech engine is available. Windows Speech Recognition evolved into Cortana (software), a personal assistant included in Windows 10. === Windows 7, 8, 10, 11 third-party speech recognition === Braina – Dictate into third party software and websites, fill web forms and execute vocal commands. Dragon NaturallySpeaking from Nuance Communications – Successor to the older DragonDictate product. Focus on dictation. 64-bit Windows support since version 10.1. Tazti – Create speech command profiles to play PC games and control applications – programs. Create speech commands to open files, folders, webpages, applications. Windows 7, Windows 8 and Windows 8.1 versions. Voice Finger – software that improves the Windows speech recognition system by adding several extensions to it. The software enables controlling the mouse and the keyboard by only using the voice. It is especially useful for aiding users to overcome disabilities or to heal from computer injuries. === Microsoft Speech API === The first version of the Microsoft Speech API was released for Windows NT 3.51 and Windows 95 in 1995, it was then part of Windows up to Windows Vista. This initial version already contained Direct Speech Recognition and Direct Text To Speech APIs which applications could use to directly control engines, as well as simplified 'higher-level' Voice Command and Voice Talk APIs. Speech recognition functionality included as part of Microsoft Office and on Tablet PCs running Microsoft Windows XP Tablet PC Edition. It can also be downloaded as part of the Speech SDK 5.1 for Windows applications, but since that is aimed at developers building speech applications, the pure SDK form lacks any user interface (numerous applications were available), and thus is unsuitable for end users. == Built-in software == Microsoft Kinect includes built-in software which allows speech recognition of commands. Older generations of Nokia phones like Nokia N Series (before using Windows 7 mobile technology) used speech-recognition with family names from contact list and a few commands. Siri, originally implemented in the iPhone 4S, Apple's personal assistant for iOS, which uses technology from Nuance Communications. Cortana (software), Microsoft's personal assistant built into Windows Phone and Windows 10. == Interactive voice response == The following are interactive voice response (IVR) systems: CSLU Toolkit Genesys HTK – copyrighted by Microsoft, but allows altering software for licensee's internal use LumenVox ASR Tellme Networks; acquired by Microsoft == Unix-like x86 and x86-64 speech transcription software == Janus Recognition Toolkit (JRTk) Mozilla DeepSpeech was developing an open-source Speech-To-Text engine based on Baidu's deep speech research paper. Weesper Neon Flow – professional voice-dictation software that provides offline speech-to-text processing on macOS and Windows using local AI models. It is not open source and offers a paid subscription after a 15‑day free trial. Vocalinux – open-source speech transcription software for Linux. == Discontinued software == IBM VoiceType (formerly IBM Personal Dictation System) IBM ViaVoice – Embedded version still maintained by IBM. No longer supported for versions above Windows Vista. Untested above macOS 10.4 or on Macintoshes with an Intel chipset. Quack.com; acquired by AOL; the name has now been reused for an iPad search app. SpeechWorks from Nuance Communications. Yap Speech Cloud – Speech-to-text platform acquired by Amazon.com.

  Read more →
• 

  Apps to analyse COVID-19 sounds

  Apps to analyse COVID-19 sounds are mobile software applications designed to collect respiratory sounds and aid diagnosis in response to the COVID-19 pandemic. Numerous applications are in development, with different institutions and companies taking various approaches to privacy and data collection. Current efforts are aimed at gathering data. In a later stage, it is possible that sound apps will have the capacity (and ethical approvals) to provide information back to users. In order to develop and train signal analysis approaches, large datasets are required. == History == The COVID-19 outbreak was announced as a global pandemic by the World Health Organization in March 2020 and has affected a growing number of people globally. In this context, advanced artificial intelligence techniques are being considered as tools in aiding our response to global health crisis. Other COVID-19 apps which offer solutions for user tracking have been developed. At the same time a number of approaches which tries to use respiratory sounds and artificial intelligence to understand if the disease can be diagnosed have been proposed. A few studies are available as preprints (i.e. not yet peer-reviewed) documents. == Methodologies == The potential for using speech and sound analysis by artificial intelligence to help in this scenario, by surveying which types of related or contextually significant phenomena can be automatically assessed from speech or sound has been recently overviewed. These include the automatic recognition and monitoring of breathing, dry and wet coughing or sneezing sounds, speech under cold, eating behaviour, sleepiness, or pain. Additionally, the potential use-cases of intelligent speech analysis for COVID-19 diagnosed patients has also been presented. In particular, by analysing speech recordings from these patients, an audio-only-based model to automatically categorise the health state of patients from four aspects, including the severity of illness, sleep quality, fatigue, and anxiety, is constructed. This work shows promise in estimating the severity of illness. Machine learning methods have been explored to recognize and diagnose coughs from different diseases. These included a low complexity, automated recognition and diagnostic tool for screening respiratory infections that utilizes convolutional neural networks (CNNs) to detect cough within environment audio and diagnose three potential illnesses (i.e. bronchitis, bronchiolitis and pertussis) based on their unique cough audio features. A large-scale crowdsourced dataset of respiratory sounds has been collected to aid diagnosis of COVID-19: coughs and breathing sounds are sufficient to distinguish users affected by COVID-19 versus those affected by asthma or healthy controls. Behind these studies is the ambition that automated systems to screen for respiratory diseases based on voice, raw cough or other sound data would have positive medical applications in both clinical and public health arenas. == List of apps to analyse COVID-19 sounds ==

  Read more →
• 

  Microsoft Fresh Paint

  Fresh Paint is a painting app developed by Microsoft and released on May 25, 2012. == History == Fresh Paint originated from a Microsoft Research project known as Project Gustav, an endeavor to reproduce the behavior of physical oil paint on a digital medium. To push the boundaries of simulating oil on a digital medium, the research team created a physics model that precisely replicated on a screen what would happen in the real world if you combined oil, a surface and a tool such as a paint brush. Two publications, Detail-Preserving Paint Modeling for 3D Brushes and Simple Data-Driven Modeling of Brushes, were released as a result of the team’s findings. After a variety of internal testing Project, Gustav was codenamed Digital Art. Partnering with The Museum of Modern Art, Digital Art was tested for a year by 60,000 people. With feedback culled from MoMA, developers expanded the existing physics model, experimenting with how real oil paint blended and reacted to the texture of a canvas. After final adjustments were made, Digital Art was rebranded as Fresh Paint. It was released to the public on 25 May 2012.

  Read more →
• 

  Logogen model

  The logogen model of 1969 is a model of speech recognition that uses units called "logogens" to explain how humans comprehend spoken or written words. Logogens are a vast number of specialized recognition units, each able to recognize one specific word. This model provides for the effects of context on word recognition. == Overview == The word logogen can be traced back to the Greek-language word logos, which means "word", and genus, which means "birth". British scientist John Morton's logogen model was designed to explain word recognition using a new type of unit known as a logogen. A critical element of this theory is the involvement of lexicons, or specialized aspects of memory that include semantic and phonemic information about each item that is contained in memory. A given lexicon consists of many smaller, abstract items known as logogens. Logogens contain a variety of properties about given word such as their appearance, sound, and meaning. Logogens do not store words within themselves, but rather they store information that is specifically necessary for retrieval of whatever word is being searched for. A given logogen will become activated by psychological stimuli or contextual information (words) that is consistent with the properties of that specific logogen and when the logogen's activation level rises to or above its threshold level, the pronunciation of the given word is sent to the output system. Certain stimuli can affect the activation levels of more than one word at a time, usually involving words that are similar to one another. When this occurs, whichever of the words' activation levels reaches the threshold level, it is that word that is then sent to the output system with the subject remaining unaware of any partially excited logogens. This assumption was made by Marslen-Wilson and Welch (1978), who added to the model some assumptions of their own in order to account for their experimental results. They also assumed that the analysis of phonetic input can only become available to other parts of the system by process of how the input affects the logogen system. Finally, Marslen-Wilson and Welch assume that the first syllable of a given word will increase the activation level of a given logogen more than those of the latter syllables, which supported the data found at the time. == Analysis == The logogen model can be used to help linguists explain particular occurrences in the human language. The most-helpful application of the model is to show how one accesses words and their meanings in the lexicon. The word-frequency effect is best explained by the logogen model in that words (or logogens) that have a higher frequency (or are more common) have a lower threshold. This means that they require less perceptual power in the brain to be recognized and decoded from the lexicon and are recognized faster than those words that are less common. Also, with high-frequency words, the recovery from lowering the item's threshold is less fulfilled compared to low-frequency words so less sensory information is needed for that particular item's recognition. There are ways to lower thresholds, such as repetition and semantic priming. Also, each time a word is encountered through these methods, the threshold for that word is temporarily lowered partially because of its recovering ability. This model also conveys that specific concrete words are recalled better because they use images and logogens, whereas abstract words are not as easily recalled well because they only use logogens, hence showing the difference in thresholds between these two types of words. At the time of its conception, Morton's logogen model was one of the most influential models in springing up other parallel word access models and served as the essential basis for these subsequent models. Morton's model also strongly influenced other contemporary theories on lexical access. However, despite the advantages that the logogen theory presents, it also displays some negative facets. First and foremost, the logogen model does not explain all occurrences in language, such as the introduction of new words or non-words into a person's lexicon. Also, because of the distinctive model application, it may vary in its effectiveness in different languages. == Criticisms == While this model does a reasonable job of understanding the underlying semantics of many aspects in psycholinguistics, there are some flaws that have been pointed out in the logogen model. It has been argued that the prior stimulus patterns that have been seen in the logogen theory are not centrally localized in the logogen itself but are actually distributed throughout the different pathways over which the stimulus is being processed. What this directs at is that the notion and proliferation of logogens was due to modality. In essence, the logogen is unnecessary in the idea of attaining the title of being a recognition unit because of the variety of pathways that it is open to, not just logogens. Another criticism has been that this model essentially ignores larger and more critical structures in language and phonetics such as the different syntactic rules or grammatical construction that innately exists in language. Since this model overtly limits itself to the scope of lexical access then this model is seen as biased and misunderstood. To many psychologists, the logogen model does not meet the functional or representational adequacy that a theory should include to sufficiently comprehend language. Also, another criticism is that the logogen theory was supposed to predict that stimulus degradation should affect priming and word frequency in humans. However, many psychologists have conducted studies and researched the model to show that only priming and not word frequency is interacted with stimulus degradation. Priming is supposed to deteriorate a stimulus because it postulates that the semantic characteristics of previously known words are fed back into the detector of a person which in turn raises the threshold of related items. In word frequency, stimulus degradation is supposed to occur because it postulates that familiar words have lower thresholds than their low-frequency counterparts. However, in studies, priming is the only structure that does show observable and notable stimulus decadence. Even though the logogen theory has many unfilled holes, Morton was a revolutionary of his field whose speculation and research has opened up a remarkable era of psycholinguistics. == Other models to consider == cohort model – This model was proposed by Marslen-Wilson and was designed specifically to account for auditory word recognition. It works by breaking the word down and states that when a word is heard all words that begin with the first sound of the target word are activated. This set of words is considered the cohort. Once the first cohort has been activated, the other information, or sounds in the word narrow down the choices. The person recognizes the word when you are left with a single choice; this is considered the "recognition point". checking model – This model was developed by Norris in 1986. In this particular model, he took the approach that any word that partially matches the input is analyzed and checked to see if it fits with the context of the situation. interactive-activation model – This model is considered a connectionist model. Proposed by McClelland and Rumelhart in the 1981 to 1982 period, it is based around nodes, which are visual features, and positions of letters within a given word. They also act as word detectors which have inhibitory and excitatory connections between them. This model starts with first letter and suggests that all the words with that first letter are activated at first and then going through the word one can determine what the word is they are looking at. The main principle is that mental phenomena can be described by interconnected networks of simple units. verification model – The model was developed by Curtis Becker in 1970. The main idea is that a small number of candidates that are activated in parallel are subject to a serial-verification process. This model starts the word-recognition process with a basic representation of the stimulus. Then, sensory trace, consisting of line features is used to activate word detectors. When an acceptable number of detectors are activated these are used to generate a search set. These items are drawn from the lexicon on the basis of similarity to the sensory trace, which help with the identity of the stimulus. Then, in a serial process the candidates are compared to the representation of the sensory-trace input. == Related concepts == word frequency – This is the belief that the speed and accuracy with which a word is recognized is related to how frequently the word occurs in our language. Each logogen has a threshold (for identification) and words with higher frequencies have lower thresholds. Words with higher freq

  Read more →
• 

  ChromaDB

  Chroma or ChromaDB is open-source data infrastructure tailored to applications with large language models. Its headquarters are in San Francisco. In April 2023, it raised 18 million US dollars as seed funding. ChromaDB has been used in academic studies on artificial intelligence, particularly as part of the tech stack for retrieval-augmented generation.

  Read more →
• 

  Adobe GoLive

  Adobe GoLive was a WYSIWYG HTML editor and web site management application from Adobe Systems. It replaced Adobe PageMill as Adobe's primary HTML editor and was itself discontinued in favor of Dreamweaver. The last version of GoLive that Adobe released was GoLive 9. == History == GoLive originated as the flagship product of a company named GoNet Communication, Inc. then based in Menlo Park, California, and the development company GoNet Communications GmbH in Hamburg, Germany, in 1996. Later GoNet changed its name to GoLive Systems, Inc, and the name of its product to GoLive CyberStudio. Adobe acquired GoLive in 1999 and re-branded the GoLive CyberStudio product to what became Adobe GoLive. Adobe took over the Hamburg office as an Adobe development site to continue to develop the product. At the time of the acquisition, CyberStudio was a Macintosh-only application. In the spring of 1999 Adobe released Adobe GoLive for both Macintosh and Microsoft Windows. The first versions of Dreamweaver and CyberStudio were released in a similar timeframe. However, Dreamweaver eventually became the dominant WYSIWYG HTML editor in market share. After the Adobe acquisition of Macromedia (the company that had owned Dreamweaver), GoLive was progressively re-targeted toward Adobe's traditional design market, and the product became better integrated with Adobe's existing suite of design-oriented software products and less focused on the professional web development market. The Adobe CS2 Premium suite contained GoLive CS2. With the release of Creative Suite 3, Adobe integrated Dreamweaver as a replacement for GoLive and released GoLive 9 as a standalone product. In April 2008, Adobe announced that sales and development of GoLive would cease in favor of Dreamweaver. == General description and distinctive aspects == GoLive incorporated a largely modeless workflow that relied heavily on drag-and-drop. Most user interaction was done via a contextual inspector rather than the modal workflow found in Dreamweaver. Among its features were a separate editor for tables that supported nesting, and a two-dimensional panel for applying CSS styles to elements. GoLive supported drag-and-drop of native Adobe Photoshop and Adobe Illustrator files via what the company called "Smart Objects", which then automatically guided the user through saving those files in web-supported formats. Updates to the original Photoshop or Illustrator assets were automatically tracked by GoLive. It also implemented a tool called "Components" which allowed updates to interface elements throughout a site to be updated globally by changing one single file. As a website management tool, GoLive allowed users to transfer and publish content directly from within the application, and allowed individual files to be excluded from uploading. == Features == One of the new features of GoLive version 5 was Dynamic Link, which was a method of creating dynamic, database-driven web content without the need to know a server-side language and with full WYSIWYG support in the GoLive user interface. GoLive had a powerful set of extensibility API which could be used to add additional functionality to the product. The GoLive SDK provided interfaces which allowed developers to use a combination of XML, JavaScript and C/C++ to create plugins for the product. The extensibility API allowed developers access to custom drawing and event handling using JavaScript, as well as a full JavaScript debugger and command line interpreter. This allowed intermediate-level developers using interpreted JavaScript to create sophisticated user interfaces. == Language and framework structure == Adobe GoLive is coded in the C++ programming language. It uses a custom C++ framework called SCL (Simple Class Library) which was initially built from scratch by the engineers at GoLive Systems Inc. The SCL framework was also used in the short-lived Adobe Atmosphere 3D software. == Release history == As the final version, GoLive 9 was discontinued in April 2008.

  Read more →
• 

  Steerable filter

  In image processing, a steerable filter is an orientation-selective filter that can be computationally rotated to any direction. Rather than designing a new filter for each orientation, a steerable filter is synthesized from a linear combination of a small, fixed set of "basis filters". This approach is efficient and is widely used for tasks that involve directionality, such as edge detection, texture analysis, and shape-from-shading. The principle of steerability has been generalized in deep learning to create equivariant neural networks, which can recognize features in data regardless of their orientation or position. == Example == A common example of a steerable filter is the first derivative of a two-dimensional Gaussian function. This filter responds strongly to oriented image features like edges. It is constructed from two basis filters: the partial derivative of the Gaussian with respect to the horizontal direction ( x {\displaystyle x} ) and the vertical direction ( y {\displaystyle y} ). If G ( x , y ) {\displaystyle G(x,y)} is the Gaussian function, and G x {\displaystyle G_{x}} and G y {\displaystyle G_{y}} are its partial derivatives (which measure the rate of change in the x {\displaystyle x} and y {\displaystyle y} directions, respectively), a new filter G θ {\displaystyle G_{\theta }} oriented at an angle θ {\displaystyle \theta } can be synthesized with the formula: G θ = cos ⁡ ( θ ) G x + sin ⁡ ( θ ) G y {\displaystyle G_{\theta }=\cos(\theta )G_{x}+\sin(\theta )G_{y}} Here, the basis filters G x {\displaystyle G_{x}} and G y {\displaystyle G_{y}} are weighted by cos ⁡ ( θ ) {\displaystyle \cos(\theta )} and sin ⁡ ( θ ) {\displaystyle \sin(\theta )} to "steer" the filter's sensitivity to the desired orientation. This is equivalent to taking the dot product of the direction vector ( cos ⁡ θ , sin ⁡ θ ) {\displaystyle (\cos \theta ,\sin \theta )} with the filter's gradient, ( G x , G y ) {\displaystyle (G_{x},G_{y})} . == Generalization in deep learning: Equivariant neural networks == The concept of steerability is foundational to equivariant neural networks, a class of models in deep learning designed to understand symmetries in data. A network is considered equivariant to a transformation (like a rotation) if transforming the input and then passing it through the network produces the same result as passing the input through the network first and then transforming the output. Formally, for a transformation T {\displaystyle T} and a network f {\displaystyle f} , this property is defined as f ( T ( input ) ) = T ( f ( input ) ) {\displaystyle f(T({\text{input}}))=T(f({\text{input}}))} . This built-in understanding of geometry makes models more data-efficient. For example, a network equivariant to rotation does not need to be shown an object in multiple orientations to learn to recognize it; it inherently understands that a rotated object is still the same object. This leads to better generalization and performance, particularly in scientific applications. === Mathematical foundation === Equivariant neural networks use principles from group theory to create operations that respect geometric symmetries, such as the SO(3) group for 3D rotations or the E(3) group for rotations and translations. Instead of learning standard filter kernels, these networks learn how to combine a fixed set of basis kernels. These basis functions are chosen so that they have well-defined behaviors under transformation groups. Spherical harmonics are frequently used as basis functions because they form a complete set of functions that behave predictably under rotation, making them ideal for creating steerable 3D kernels. Features within the network are treated as geometric tensors, which are mathematical objects (like scalars or vectors) that are "typed" by their behavior under transformations. These types correspond to the irreducible representations (irreps) of the group. The tensor product is the fundamental operation used to combine these typed features in a way that preserves equivariance, guaranteeing that the network as a whole respects the desired symmetry. Frameworks like e3nn simplify the construction of these networks by automating the complex mathematics of irreducible representations and tensor products. === Applications === Steerable and equivariant models are highly effective for problems with inherent geometric symmetries. Examples include: Protein structure analysis: SE(3)-equivariant networks can process 3D molecular structures while respecting their rotational and translational symmetries. 3D Point cloud processing: Rotation-equivariant filters built from steerable spherical functions can perform tasks like 3D shape classification. Computational chemistry: E(3)-equivariant graph neural networks are used to model interatomic potentials for molecular dynamics simulations, creating highly accurate and data-efficient models of physical systems.

  Read more →
• 

  Passenger drone

  A passenger drone is an autonomous aircraft that is designed to carry a small number of passengers to a destination. In 2021, Ehang, a technology company based in Guangzhou, China, developed the Ehang 184, the world's first passenger drone. == History == Unmanned aerial vehicles were first introduced in World War 1, when Britain first developed the Aerial Target, an aircraft controlled remotely through radio signals. A year later in the United States, testing of Kettering Bug, a 12-foot long biplane attached with a bomb and that launched via a “slingshot-like rail”, was also under progress. Both of their unreliable test results and their possibility of endangering friendly troops in deployment caused neither aircraft to be used during the war. Production of UAVs continued after World War I and into World War II and the Vietnam War, where they would be invaluable in assisting with training as well as reconnaissance. Late 20th century also saw the proposition and development of unique methods of travel, including personal jetpacks and even flying cars. While the previously mentioned are not drones, they serve as a precursor and foundation for the passenger drones of today. The first passenger drone was unveiled on January 6 of 2016 at the international Consumer Electronics Show (CES) in Las Vegas. Produced by Ehang, a Chinese company based in Guangzhou, the 184 was a one passenger drone equipped with four propellers that could fly for approximately 23 minutes at a top speed of 63 mph. Since then, many new companies have entered the market, but none yet have been accessible by the public. == Technological development == Since 2013, improvements in designs to wing structures have contributed to the economic feasibility of passenger drones. New structural advancements, such as the flapping-wing propulsion system based on the mechanisms of birds’ wings, are more available as they have proven their capabilities in laboratory testing. As of September 29th, 2015, most market-ready drones are delivery drones with a carrying capacity limited to small packages - with a typical max capacity of under 5 pounds. However, while the technology exists for drones with larger carrying capacities, specifically those capable of carrying multiple humans, the execution of this technology is not yet market accessible. This capacity limit must be addressed for passenger drones; given current designs strive to carry a maximum of 5 people. However, some estimates believe that passengers drones could become a reality, specifically for paid transportation and emergency purposes, as early as 2026. With implementation of this technology, there could be significant effects on ground traffic including reducing gridlock in heavily congested areas and conserving up to 15% of the fuel currently used in heavy traffic patterns. However, extensive growth of the passenger drone market also risks clouding the low-altitude airspace and causing new safety risks. However, this concern is being addressed by recent advancements in the Internet of Drones (IoD) which links drones together to ensure appropriate pathing and reduce mid-air collisions. While this brings additional security issues, including maintaining reliable communication channels in the case of technological failure, researchers hope that this will help reduce crashes that can result in damage to passengers, buildings, and people in and around the airspace. == Notable companies == Ehang is a Chinese company that has developed numerous drones including passenger plane Ehang 184. EHang 184 was their first model, developed as an eight dual rotor wing blade drone that can carry two passengers. The model was retired in 2020 and is replaced by the Ehang 216. Ehang also released a one passenger drone, Ehang 116. Ehang in 2021 unveiled the model VT-30. VT-30 is designed to have eight dual rotor wing blades to complement its fixed wing platform. Flyastro, a Texas-based drone company, developed the Astro ALTA, with two and four person passenger models. The company is known for being the first to develop a solar-powered airplane. The development team initially began with the model, Elroy. It was a two passenger drone with similar design to the ALTA. Once flight was achieved, the model Astro ALTA began development. Joby Aviation is a California based company that has developed a five passenger drone, with one seat for the pilot. The company expects to complete its FAA certification process 2022. Joby in 2020 acquired a 75 million dollar investment from service provider Uber Technologies Inc., leading to Uber Elevate and Expands partnership. Archer Aviation is a California-based company that has developed a two passenger model called Maker. It has fixed wings with twelve rotor wings. Archer is developing five person model. United Airlines has partnered with Archer for commercial sale of the model, Maker. Maker is expected to be released within Los Angeles and Miami by 2024. CityAirbus is a drone project developed by Airbus, a European multinational aerospace company, based in the Netherlands. CityAirbus has developed a four- person passenger drone with fixed wings that include rotor wing blades. Its expected certification for public flight is in 2025. Boeing, an American multinational aviation corporation is developing a passenger drone model called the Passenger Air Vehicle (PAV). The model is a fixed wing with eight rotor blade wings attached onto a platform underneath the base structure. This model can hold two passengers and still is in development. Volocopter is a German aircraft manufacturer that is developing a passenger drone called Volocity. The model consist of eighteen rotor wings above the cockpit on a circular ring. Japan Airlines, an investor of Volocopter plans to have public test in Japan as early as 2023. == Future use == === Potential benefits === Passenger drones can greatly reduce the time for travel. As passenger drones flight paths are not restricted by conventional roads, the travel distance is shortened. Current ventures such as Joby Aviation, after acquiring Uber Air, plan to take advantage of this technology in the form of air taxis. Other potential benefits include the use of passenger drones by emergency services such as search and rescue missions and the delivery of life saving goods. Companies like Ehang have already begun using passenger drones as emergency vehicles as a response to the potential river collapses during the flood season in China. === Concerns === Passenger and air traffic safety remains at the forefront of concerns. Regulations for air traffic centered around passenger drones are still underway and would continue to develop with increasing use cases for passenger drones. Remote security threats on commercial drones such as Man-In-The-Middle (MITM) attack have also exposed the vulnerabilities in current drone systems. Among American adults, 54 percent say that they would feel unsafe flying inside a passenger drone. Passenger drones can be very noisy; a single passenger drone such as Joby Aviation’s all-electric vertical take-off and landing (“eVTOL”) aircraft has an estimated noise production of 70 decibels (dB), a noise level equating to “loud traffic”.

  Read more →
• 

  JasPer

  JasPer is a computer software project to create a reference implementation of the codec specified in the JPEG-2000 Part-1 standard (i.e. ISO/IEC 15444-1) - started in 1997 at Image Power Inc. and at the University of British Columbia. It consists of a C library and some sample applications useful for testing the codec. The copyright owner began licensing the code to the public under an MIT License-style license in 2004 in response to requests from the open-source community. As of 2011 JasPer operated as a component of many software projects, both free and proprietary, including (but not limited to) netpbm (as of release 10.12), ImageMagick and KDE (as of version 3.2). As of 22 June 2010 the GEGL graphics library supported JasPer in its latest Git versions. In a series of objective JPEG-2000-compression quality tests conducted in 2004, "JasPer was the best codec, closely followed by IrfanView and Kakadu". However, Jasper remains one of the slowest implementations of the JPEG-2000 codec, as it was designed for reference, not performance. == Etymology == The name "JasPer" has simultaneous connotations with Canada's Jasper National Park, with the semi-precious gemstone, jasper, and with "JP" as an abbreviation of the JPEG-2000 standard.

  Read more →
• 

  Cepstral mean and variance normalization

  Cepstral mean and variance normalization (CMVN) is a computationally efficient normalization technique for robust speech recognition. The performance of CMVN is known to degrade for short utterances. This is due to insufficient data for parameter estimation and loss of discriminable information as all utterances are forced to have zero mean and unit variance. CMVN minimizes distortion by noise contamination for robust feature extraction by linearly transforming the cepstral coefficients to have the same segmental statistics. Cepstral Normalization has been effective in the CMU Sphinx for maintaining a high level of recognition accuracy over a wide variety of acoustical environments. == Cepstral Normalization Techniques == There are multiple algorithms that achieve Cepstral Normalization in different ways. === Fixed codeword-dependent cepstral normalization (FCDCN) === FCDCN was developed to provide a form of compensation that provides greater recognition accuracy than SDCN but in a more computationally-efficient manner than the CDCN algorithm. The FCDCN algorithm applies an additive correction that depends on the instantaneous SNR of the input (like SDCN), but that can also vary from codeword to codeword (like CDCN). === Multiple Fixed Codeword-dependent Cepstral Normalization (MFCDCN) === MFCDCN is a simple extension of FCDCN algorithm that does not need environment specific training. In MFCDCN, compensation vectors are pre-computed in parallel for a set of target environments, using the FCDCN algorithm. === Incremental Multiple Fixed Codeword-dependent Cepstral Normalization (IMFCDCN) === While environment selection for the compensation vectors of MFCDCN is generally performed on an utterance-by-utterance basis, IMFCFCN improves on it by allowing the classification process to make use of cepstral vectors from previous utterances in a given session. == Cepstral Noise Subtraction == Automatic speech recognition (ASR) describes the steps of transcribing speech utterances represented as acoustic wave forms to written words. As is, CMVN has been used in different applications as this technique has proven to provide better speech recognitions results in different environments. CMVN has the capabilities to reduce differences between test and training data produced by channel distortions and colorizations . CMVN has also been found to be able to reduce differences in feature representation between speakers can also partly reduce the influence of background noise.

  Read more →
• 

  Enterprise resource planning

  Enterprise resource planning (ERP) is the integrated management of main business processes, often in real time and mediated by software and technology. ERP is usually referred to as a category of business management software—typically a suite of integrated applications—that an organization can use to collect, store, manage and interpret data from many business activities. The finance module in particular is essential to a suite of applications meeting the definition of an ERP system. The finance module provides the system of record for the organisation; recording the commercial impact of the business operations in the General Ledger. ERP systems can be local-based or cloud-based. Cloud-based applications have grown rapidly since the early 2010s due to the increased efficiencies arising from information being readily available from any location with Internet access. However, ERP differs from integrated business management systems by including planning all resources that are required in the future to meet business objectives. This includes plans for getting suitable staff and manufacturing capabilities for future needs. ERP provides an integrated and continuously updated view of core business processes, typically using a shared database managed by a database management system. ERP systems track business resources—cash, raw materials, production capacity—and the status of business commitments: orders, purchase orders, and payroll. The applications that make up the system share data across various departments (manufacturing, purchasing, sales, accounting, etc.) that provide the data. ERP facilitates information flow between all business functions and manages connections to outside stakeholders. Estimates of the size of the global ERP market range between USD $78 and $81 billion in 2026 . Though early ERP systems focused on large enterprises, smaller enterprises increasingly use ERP systems. The ERP system integrates varied organizational systems and facilitates error-free transactions and production, thereby enhancing the organization's efficiency. However, developing an ERP system differs from traditional system development. ERP systems run on a variety of computer hardware and network configurations, typically using a database as an information repository. == Origin == Business and technology research and advisory firm Gartner is credited for first using the acronym ERP in the 1990s. The term captured a functional extension of two manufacturing-based concepts, material requirements planning (MRP) and manufacturing resource planning (MRP II). Without replacing these terms, ERP came to represent a larger whole that reflected the evolution of application integration beyond manufacturing. Not all ERP packages are developed from a manufacturing core; ERP vendors variously began assembling their packages with finance-and-accounting, maintenance, and human-resource components. By the mid-1990s ERP systems addressed all core enterprise functions. Governments and non–profit organizations also began to use ERP systems. An "ERP system selection methodology" is a formal process for selecting an enterprise resource planning (ERP) system. Existing methodologies include: Kuiper's funnel method, Dobrin's three-dimensional (3D) web-based decision support tool, and the Clarkston Potomac methodology. == Expansion == ERP systems experienced rapid growth in the 1990s. Because of the year 2000 problem many companies took the opportunity to replace their old systems with ERP. ERP systems initially focused on automating back office functions that did not directly affect customers and the public. Front office functions, such as customer relationship management (CRM), dealt directly with customers, or e-business systems such as e-commerce and e-government—or supplier relationship management (SRM) became integrated later, when the internet simplified communicating with external parties. "ERP II" was coined in 2000 in an article by Gartner Publications entitled ERP Is Dead—Long Live ERP II. It describes web–based software that provides real–time access to ERP systems to employees and partners (such as suppliers and customers). The ERP II role expands traditional ERP resource optimization and transaction processing. Rather than just manage buying, selling, etc.—ERP II leverages information in the resources under its management to help the enterprise collaborate with other enterprises. ERP II is more flexible than the first generation ERP. Rather than confine ERP system capabilities within the organization, it goes beyond the corporate walls to interact with other systems. Enterprise application suite is an alternate name for such systems. ERP II systems are typically used to enable collaborative initiatives such as supply chain management (SCM), customer relationship management (CRM) and business intelligence (BI) among business partner organizations through the use of various electronic business technologies. The large proportion of companies are pursuing a strong managerial targets in ERP system instead of acquire an ERP company. Developers now make more effort to integrate mobile devices with the ERP system. ERP vendors are extending ERP to these devices, along with other business applications, so that businesses don't have to rely on third-party applications. As an example, the e-commerce platform Shopify was able to make ERP tools from Microsoft and Oracle available on its app in October 2021. Technical stakes of modern ERP concern integration—hardware, applications, networking, supply chains. ERP now covers more functions and roles—including decision making, stakeholders' relationships, standardization, transparency, globalization, etc. == Functional areas == An ERP system covers the following common functional areas. In many ERP systems, these are called and grouped together as ERP modules: Financial accounting: general ledger, fixed assets, payables including vouchering, matching and payment, receivables and collections, cash management, financial consolidation Management accounting: budgeting, costing, cost management, activity based costing, billing, invoicing (optional) Human resources: recruiting, training, rostering, payroll, benefits, retirement and pension plans, diversity management, retirement, separation Manufacturing: engineering, bill of materials, work orders, scheduling, capacity, workflow management, quality control, manufacturing process, manufacturing projects, manufacturing flow, product life cycle management Order processing: order to cash, order entry, credit checking, pricing, available to promise, inventory, shipping, sales analysis and reporting, sales commissioning Supply chain management: supply chain planning, supplier scheduling, product configurator, order to cash, purchasing, inventory, claim processing, warehousing (receiving, putaway, picking and packing) Project management: project planning, resource planning, project costing, work breakdown structure, billing, time and expense, performance units, activity management Customer relationship management (CRM): sales and marketing, commissions, service, customer contact, call center support – CRM systems are not always considered part of ERP systems but rather business support systems (BSS) Supplier relationship management (SRM): suppliers, orders, payments. Data services: various "self-service" interfaces for customers, suppliers or employees Management of school and educational institutes. Contract management: creating, monitoring, and managing contracts, reducing administrative burdens and minimising legal risks. These modules often feature contract templates, electronic signature capabilities, automated alerts for contract milestones, and advanced search functionality. === GRP – ERP use in government === Government resource planning (GRP) is the equivalent of an ERP for the public sector and an integrated office automation system for government bodies. The software structure, modularization, core algorithms and main interfaces do not differ from other ERPs, and ERP software suppliers manage to adapt their systems to government agencies. Both system implementations, in private and public organizations, are adopted to improve productivity and overall business performance in organizations, but comparisons (private vs. public) of implementations shows that the main factors influencing ERP implementation success in the public sector are cultural. == Best practices == Most ERP systems incorporate best practices. This means the software reflects the vendor's interpretation of the most effective way to perform each business process. Systems vary in how conveniently the customer can modify these practices. Use of best practices eases compliance with requirements such as International Financial Reporting Standards, Sarbanes–Oxley, or Basel II. They can also help comply with de facto industry standards, such as electronic funds transfer. This is because the procedure can be readily

  Read more →