AI Content Udemy

AI Content Udemy — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

GPT-5

GPT-5 is a multimodal large language model developed by OpenAI and the fifth in its series of generative pre-trained transformer (GPT) foundation models. Preceded in the series by GPT-4, it was launched on August 7, 2025. It is publicly accessible to users of the chatbot products ChatGPT and Microsoft Copilot as well as to developers through the OpenAI API. == Background == On April 14, 2023, Sam Altman, the chief executive officer of OpenAI, spoke at an event at the Massachusetts Institute of Technology and said that the company was not training GPT-5 at that time. He stated that OpenAI was "prioritizing GPT-4 development" and that "we are not and won't for some time" release GPT-5. On July 18, OpenAI filed for a "GPT-5" trademark in the United States. On November 13, Altman confirmed to the Financial Times that the company was working to develop GPT-5. According to The Information, "[f]or much of the second half of 2024, OpenAI was developing a model known internally as Orion and intended to become GPT-5", "[b]ut the Orion effort failed to produce a better model, and the company instead released it as GPT-4.5 in February [2025]." By late July 2025, OpenAI was widely anticipated as planning to release GPT-5 in early August. On July 30, The Verge reported that "Microsoft is getting ready for GPT-5" as "sources familiar with Microsoft's AI plans" told an editor that the company was testing a new mode for its Copilot chatbot that would offer a model that "thinks deeply or quickly based on the task". On August 5, in the leadup to the release of GPT-5, OpenAI released GPT-OSS, a set of two open-weight models that have reasoning capabilities. GPT-5 was then unveiled during a livestream event on August 7. == Capabilities == At the time of its release, GPT-5 had state-of-the-art performance on benchmarks that test mathematics, programming, finance, and multimodal understanding. According to OpenAI, improvements over its predecessor models include faster response times, better coding and writing skills, more accurate answers to health questions, and lower levels of hallucination. Also, compared to previous models, GPT-5 aims to give safe, high-level responses to potentially harmful queries rather than outright declining them, an approach that OpenAI refers to as "safe completions", aiming to result "in GPT-5 being able to refuse more unsafe questions, while offering fewer rejections to users seeking harmless information." In addition, GPT-5 was trained to give more critical, "less effusively agreeable" answers compared to its predecessor models. Days before the launch of GPT-5, two early testers of the model stated that they were "impressed" by its ability to code and to solve mathematical and scientific problems. They suggested that the model shows great improvement from GPT-4, but not as large of a gain as from GPT-3 to GPT-4. A day prior to the release of GPT-5, during a press briefing, Sam Altman, the chief executive officer of OpenAI, called GPT-5 "a significant step along the path to AGI", referring to artificial general intelligence, the hypothetical level of intelligence that OpenAI defines as the ability to perform any economically valuable task that a human can. According to Altman, GPT-5 is "significantly better" than its predecessors, offering "PhD-level" abilities across a wide range of tasks. The exact energy consumption of GPT-5 use has not been disclosed by OpenAI. Researchers at the University of Rhode Island estimated that a medium-length response consumes slightly over 18 watt-hours, equivalent to using an incandescent bulb for 18 minutes. === Architecture === GPT-5 is a system that contains a fast, high-throughput model, a deeper reasoning model, and a real-time router that decides which model to use based on conversation type, complexity, tool needs, and explicit user intent. Altman had previously criticized the manual model picker for being overly complex, suggesting a need for unification. GPT-5 also includes agentic functionality through which it can set up its own desktop and can use its browser to search autonomously for sources that relate to its task. The GPT-5 system card defines two fast, high-throughput models – gpt-5-main and gpt-5-main-mini – and two thinking models – gpt-5-thinking and gpt-5-thinking-mini. In the OpenAI API, developers can access the thinking model, its mini version, and gpt-5-thinking-nano, an even smaller and faster nano version of the thinking model. The version of GPT-5 that is accessible via the API has adjustable reasoning effort (low, medium, high, or minimal) and verbosity (low, medium, or high). Additionally, ChatGPT provides access to gpt-5-thinking with a setting that makes use of parallel test-time compute, referred to as gpt-5-thinking-pro. == Limitations == === Safety === Neuraltrust, a security research company, claimed to have successfully compromised GPT-5 within its first day of testing the model. According to its report, it enabled GPT-5 to generate detailed instructions for manufacturing explosive devices. SPLX, another company, conducted similar tests and came to similar conclusions about GPT-5's security. Their assessments suggest that GPT-5 has significant security gaps, potentially rendering it as being unsafe for use in a corporate environment. == Training == According to AIMultiple, GPT-5 is natively multimodal, meaning that it was trained from scratch on multiple modalities (like text and images) at once without relying on already-trained language or vision models. Its training process involved three stages: unsupervised pretraining, supervised fine-tuning, and reinforcement learning from human feedback. Pretraining used a large-scale multilingual dataset of books, articles, web pages, academic papers, and licensed sources. GPT-5's visual and text capabilities were described as having been developed alongside each other throughout training, unlike with GPT-4. == Use == GPT-5 is used in ChatGPT. Although GPT-5 is free for all ChatGPT users, Plus users get higher use limits while Pro users get unlimited access to GPT-5 as well as limited access to GPT-5 Pro. Standard limits for lower-tier users on responses per hour still apply. Additionally, with the introduction of GPT-5, ChatGPT's "Advanced Voice Mode" was replaced by "ChatGPT Voice", which is supposed to enable more natural-sounding conversations. OpenAI stated that "Standard Voice Mode retires on September 9, 2025, unifying all users on ChatGPT Voice". On November 24, 2025, the feature of shopping research was added to ChatGPT, claimed to be a mini model post-trained on gpt-5-thinking-mini. GPT-5 is also available in Microsoft Copilot, and Microsoft stated that it will incorporate GPT-5 into a wide variety of its products. According to 9to5Mac, Apple Inc. is planning to integrate the model into the Apple Intelligence feature in its iOS 26, iPadOS 26, and macOS Tahoe operating systems. It is also accessible via the OpenAI API. A number of American companies were reported as having received access to GPT-5 ahead of its launch. OpenAI stated that the private health insurance company Oscar Health was checking applications from its policyholders with the model. In addition, Uber was using GPT-5 for its customer support system; GitLab, Windsurf, and Cursor were using the model for software development; and the Spanish bank BBVA was using it for financial analysis. Other companies that OpenAI listed as having used GPT-5 pre-release include Amgen, Lowe's, and Notion. == Reception == === Critical reviews === Grace Huckins in MIT Technology Review found that, "[w]hereas o1 was a major technological advancement, GPT-5 is, above all else, a refined product." In response to claims that Sam Altman, the chief executive officer of OpenAI, had made about the model, she stated that "GPT-5 will furnish a more pleasant and seamless user experience. That's not nothing, but it falls far short of the transformative AI future that Altman has spent much of the past year hyping." In response to Altman's claim that GPT-5 is "a significant step along the path" to artificial general intelligence, she noted: "[M]aybe he's right—but if so, it's a very small step." In The Information, Stephanie Palazzolo praised GPT-5's coding capabilities. According to Matteo Wong in The Atlantic, GPT-5 "is intuitive, fast, and efficient; adapts to human preferences and intentions; and is easy to personalize." He stated: "At this stage of the AI boom, when every major chatbot is legitimately helpful in numerous ways, benchmarks, science, and rigor feel almost insignificant. What matters is how the chatbot feels [...]". John Herrman from the New York magazine wrote: "Casual users who encounter GPT-5 through ChatGPT aren't likely to feel like they're using a completely different product [...] while people who use it for software development or in a corporate context are more likely to notice a major change." Mashable's Christian de Looper found that "GPT-5
Read more →
Carrenza

Carrenza was a cloud-computing company based in London, United Kingdom. The company was acquired by Six Degrees Technology Group in 2016. == Operations == Carrenza was a UK-based IT company that provides Cloud computing technologies. It offered a range of public cloud, private cloud and hybrid cloud services, including Infrastructure as a Service (IaaS), Platform as a Service (PaaS), enterprise application integration and system integration. Carrenza partnered with several enterprise IT providers and was an accredited VMware Enterprise Service Partner and HP (Hewlett-Packard) Cloud Agile Partner. The company was based on Commercial Street, in the heart of the East London Tech City district, which is host to a large number of technology companies. == History == Carrenza was formed in 2001 as a consultancy by chief executive and founder Dan Sutherland. It began trading in 2004 and launched its first enterprise cloud computing platform in 2006, becoming one of the first companies in Europe to provide this type of hosting service. In 2009, it formed a partnership with Comic Relief and its affiliated campaigns Red Nose Day Sport Relief to provide IT infrastructure services to the charity, an arrangement that has won industry recognition. In 2013 it launched its first overseas services, with a mainland Europe cloud node based in Amsterdam. == Partnerships and customers == Carrenza had formed partnerships with a range of IT providers. It was one of the first companies in Europe to become a HP Cloud Agile partner., using HP blade servers and HP 3PAR SAN technology to power its cloud computing services. The company's products also use VMware vCloud IaaS tools and it is taking part in the VMware lighthouse initiative helping develop the next generation of VMware products and services. Other technology companies that Carrenza has worked closely with include Cisco, for enterprise security and loadblancing services, and Oracle. The company was the first to deploy Oracle Database 11g stretched RAC in production. It has also won two Oracle partner awards, including a Special Recognition award for its work with Comic Relief. The company has also been recognised by the UK IT Industry, receiving awards in 2009 for Community Project of the Year and in 2010 for best small business project for its Monopoly City Streets Work. Other companies that have partnered with Carrenza for their cloud-based IT services include Age UK, Haymarket Media Group, the World Wide Fund for Nature, Royal Bank of Scotland, eBay and Cineworld. == Accreditations == Carrenza's services are accredited for their compliance with several key international IT security and quality standards. These include: ISO27001:2005, Information Security Management System for all Carrenza services. UK Government G-Cloud, Carrenza has been awarded a place on the UK government's G-Cloud iii framework as an Infrastructure as a Service provider.
Read more →
Open Data Center Alliance

opendatacenteralliance.org appears to have been closed down. The Open Data Center Alliance is an independent organization created in Oct. 2010 with the assistance of Intel to coordinate the development of standards for cloud computing. Approximately 100 companies, which account for more than $50bn of IT spending, have joined the Alliance, including BMW, Royal Dutch Shell and Marriott Hotels. "The Alliance's Cloud 2015 vision is aimed at creating a federated cloud where common standards will be laid down for those in the hardware and software arena." == Usage Model Roadmap == The organization sees a growing need for solutions developed in an open, industry-standard and multivendor fashion, and has thus created a usage model roadmap featuring 19 prioritized usage models. The usage models provide detailed requirements for data center and cloud solutions, and will include detailed technical documentation discussing the requirements for technology deployments. To further its roadmap development, the steering committee established five initial technical workgroups in the areas of infrastructure, management, regulation & ecosystem, security and services. The organization delivered a 0.50 usage model roadmap to Open Data Center Alliance technical workgroups in Oct. 2010, and delivered a full 1.0 roadmap for public use in June 2011. == Membership == The steering committee consists of BMW, Capgemini, China Life, China Unicom Group, Deutsche Bank, JPMorgan Chase, Lockheed Martin, Marriott International, Inc., National Australia Bank, Royal Dutch Shell, Terremark and UBS. Other members include AT&T, CERN, eBay, Logica, Motorola Mobility Inc. and Nokia. "The demands on the IT organisations are coming at such an alarming rate that there are many, many different solutions being developed today that maybe don't work with each other. We need one voice, one road map, so that companies are able to say to manufacturers here is a clear vision of what they should be developing their product to do." says Marvin Wheeler, of Terremark, chairman of the Alliance. "While it's unclear how successful this alliance will be, it is at least shedding the spotlight on cloud interoperability, a big emerging issue," said Larry Dignan of ZDNet.
Read more →
TAPPS2

TAPPS2 (Technische Alternative Planungs- und Programmier-System) is a tool used for developing the program logic for the universal, heating and solar thermal controllers by Austrian manufacturer Technische Alternative. Its primary usecase is defining the exact reaction of the controller to a certain event. Other than its predecessor, TAPPS, which could only be used to program controllers of type UVR1611, TAPPS2 is mainly used to program the UVR16x2 and RSM610 controllers, as well as several extension modules. == Development == Development in TAPPS2 is done on a vector-based drawing surface using components that can be placed via drag and drop. The components, which can be separated into inputs, functions and outputs are then being connected according to their individual features. Available components vary according to the current solar thermal control unit.
Read more →
Verbal overshadowing

Verbal overshadowing is a phenomenon where giving a verbal description of sensory input impairs formation of memories of that input. This was first reported by Schooler and Engstler-Schooler (1990) where it was shown that the effects can be observed across multiple domains of cognition which are known to rely on non-verbal knowledge and perceptual expertise. One example of this is memory, which has been known to be influenced by language. Seminal work by Carmichael and collaborators (1932) demonstrated that when verbal labels are connected to non-verbal forms during an individual's encoding process, it could potentially bias the way those forms are reproduced. Because of this, memory performance relying on reportable aspects of memory that encode visual forms should be vulnerable to the effects of verbalization. == Initial findings == Schooler and Engstler-Schooler (1990) were the first to report findings of verbal overshadowing. In their study, participants watched a video of a simulated robbery and were instructed to either verbally describe the robber or engage in a control task. Those who engaged in giving a verbal description were less likely to correctly identify the robber from a test lineup, compared to those who engaged in the control task. A larger effect was detected when the verbal description was provided 20, rather than 5, minutes after the video, and immediately before the test lineup. A meta-analysis by Meissner and Brigham (2001) supported the effects of verbal overshadowing, showing a small but reliably negative effect. == General effects of verbal overshadowing == The effects of verbal overshadowing have been generalized across multiple domains of cognition that are known to rely on non-verbal knowledge and perceptual expertise, such as memory. Memory has been known to be influenced by language. Seminal work by Carmichael and collaborators (1932) demonstrated that labels attached to, or associated with, non-verbal forms during memory encoding can affect the way the forms were subsequently reproduced. Because of this, memory performance that relies on reportable aspects of memory that encode visual forms should be vulnerable to the effects of verbalization. Pelizzon, Brandimonte, and Luccio (2002) found that visual memory representations appear to incorporate visual, spatial, and temporal characteristics. It is explained as follows: With the temporal code (where the only information available is the sequence of the stimuli), performance levels remain high, unless participants are required to retrieve the stimuli in a different order from that used at encoding (visual cue). In this case, performance is significantly impaired, even in the presence of a visual cue. The study showed that order information acts as a link between the two separate representations of figure and background, hence preventing verbal overshadowing at encoding (temporal component) or attenuating its influence at retrieval (spatial component).(p. 960) Hatano, Ueno, Kitagami, and Kawaguchi found that verbal overshadowing is likely to occur when participants verbally described targets in detail. Detailed verbal descriptions resulted in more frequently inaccurate descriptions that in turn created inaccurate representations in the memories of participants. Inaccuracies are also likely to occur when face recognition comes immediately after verbalization. Other forms of non-verbal knowledge affected by verbal overshadowing include the following: [Verbal overshadowing] has also been observed when participants attempt to generate descriptions of other 'difficult-to-describe' stimuli such as colors (Schooler and Engstler-Schooler, 1990) or abstract figures (Brandimonte et al., 1997), or other non-visual tasks such as wine tasting (Melcher and Schooler, 1996), decision making (Wilson and Schooler, 1991), and insight problem-solving. (p. 871) (Schooler et al., 1993) Verbalization of stimuli leads to the disruption of non-reportable processes that are necessary for achieving insight solutions, which are distinct from language processes. Schooler, Ohlsson, and Brooks (1993) found that face recognition requires information that cannot be adequately verbalized, giving rise to difficulty in describing factors in recognition judgments. Subjects were less effective in solving insight problems when compelled to put their thoughts in words, which suggests that language may interfere with thought. The verbal overshadowing effect was not seen when participants engaged in articulatory suppression. Performance was reduced in both the verbal and non-verbal description conditions. This is evidence that verbal encoding plays a role in face recognition. By testing with distracting faces presented between study and test, Lloyd-Jones and Brown (2008) suggested a dual-process approach to recognition memory took place, that verbalization influenced familiarity-based processes at first, but its effects were later seen on recollection, when discrimination between items became more difficult. == Verbal overshadowing in facial recognition == The verbal overshadowing effect can be found for facial recognition because faces are predominately processed in a holistic or configurable manner. (Tanaka & Farah, 1993; Tanaka & Sengco, 1997) Verbalizing one's memory for a face is done using a featural or analytic strategy, leading to a drift from the configurable information about the face and to impaired recognition performance. However, Fallshore & Schooler (1995) found that the verbal overshadowing effect was not found when participants described faces of races different from their own. A study by Brown and Lloyd-Jones (2003) found that there was no verbal overshadowing effect found in car descriptions; it was only seen in facial descriptions. The authors noted that descriptions were no different on any measure including accuracy. It is suggested that less expertise in verbalizing faces rather than cars invokes a stronger shift in verbal and featural processing. This supports the concept of a transfer inappropriate retrieval framework and addresses some limitations of the effect. Wickham and Swift (2006) suggested that the verbal overshadowing effect is not seen in describing all faces, and one aspect that determines this is distinctiveness. Results showed that typical faces produce verbal overshadowing, while distinctive faces did not. In studies of eyewitness reports, variation in response criteria given by participants influenced the quality of the descriptions generated and accuracy on identification task, known as the retrieval-based effect. Face recognition was also impaired when subjects described a familiar face, such as a parent, or when describing a previously seen but novel face. Dodson, Johnson, and Schooler (1997) found that recognition was also impaired when participants were provided with a description of a previously seen face, and they were able to ignore provided versus self-generated descriptions more easily. This finding of verbal overshadowing suggested that eyewitness recognition is not only affected by their own descriptions, but of descriptions heard from others, such other eyewitness testimonies. == Voice recognition == The verbal overshadowing effect has also been found to affect voice identification. Research shows that describing a non-verbal stimuli leads to a decrease in recognition accuracy. In an unpublished study by Schooler, Fiore, Melcher, and Ambadar (1996), participants listened to a tape-recorded voice, after which they were asked either to verbally describe it or to not do so, and then asked to distinguish the voice from 3 similar distractor voices. The results showed that verbal overshadowing impaired accuracy of recognition based on gut feeling, suggesting an overall verbal overshadowing for voice recognition. Due to the forensic relevance of voices heard over the telephone and harassing phone calls that are often a problem for police, Perfect, Hunt, and Harris (2002) examined the influence of three factors on accuracy and confidence in voice recognition from a line-up. They expected to find an effect, because voice represents a class of stimuli that is difficult to describe verbally. This meets Schooler et al.'s (1997) modality mismatch criterion, meaning that describing the speakers age, gender, or accent is difficult, making voice recognition susceptible to the verbal overshadowing phenomenon. It was found that the method of memory encoding had no impact on performance, and that hearing a telephone voice reduced confidence but did not affect accuracy. They also found that providing a verbal description impaired accuracy but had no effect on confidence. The data showed an effect of verbal overshadowing in voice recognition and provided yet another disassociation between confidence and performance. Although there was a difference in confidence level, witnesses were able to identify voices over the telephone as accurately as voices heard direc
Read more →
15.ai

15.ai was a free non-commercial web application and research project that uses artificial intelligence to generate text-to-speech voices of fictional characters from popular media. Created by a pseudonymous artificial intelligence researcher known as 15, who began developing the technology as a freshman during their undergraduate research at the Massachusetts Institute of Technology (MIT), the application allows users to make characters from video games, television shows, and movies speak custom text with emotional inflections. The platform is able to generate convincing voice output using minimal training data; the name "15.ai" references the creator's statement that a voice can be cloned with just 15 seconds of audio. It was an early example of an application of generative artificial intelligence during the initial stages of the AI boom. Launched in March 2020, 15.ai became an Internet phenomenon in early 2021 when content utilizing it went viral on social media and quickly gained widespread use among Internet fandoms, such as the My Little Pony: Friendship Is Magic, Team Fortress 2, and SpongeBob SquarePants fandoms. The service featured emotional context through emojis, precise pronunciation control, and multi-speaker capabilities. Critics praised 15.ai's accessibility and emotional control but criticized its technical limitations in prosody options and non-English language support, with mixed results depending on character complexity. 15.ai is credited as the first platform to popularize AI voice cloning in memes and content creation. Voice actors and industry professionals debated 15.ai's implications, raising concerns about employment impacts, voice-related fraud, and potential misuse. In January 2022, it was discovered that a company called Voiceverse had generated voice lines using 15.ai without attribution, promoted them as the byproduct of their own technology, and sold them as non-fungible tokens (NFT) without permission. News publications universally characterized this incident as the company having "stolen" from 15.ai. The service went offline in September 2022 due to legal issues surrounding artificial intelligence and copyright. Its shutdown was followed by the emergence of commercial alternatives whose founders have acknowledged 15.ai's pioneering influence in the field of deep learning speech synthesis. On May 18, 2025, 15 launched 15.dev as the sequel to 15.ai. == History == === Background === The field of speech synthesis underwent a significant transformation with the introduction of deep learning approaches. In 2016, DeepMind's publication of the WaveNet paper marked a shift toward neural network-based speech synthesis, which enabled higher audio quality via causal convolutional neural networks. Previously, concatenative synthesis—which worked by stitching together pre-recorded segments of human speech—was the predominant method for generating artificial speech, but it often produced robotic-sounding results at the boundaries of sentences. In 2018, Google AI's Tacotron 2 showed that neural networks could produce highly natural speech synthesis but required substantial training data (typically tens of hours of audio) to achieve acceptable quality. When trained on two hours of training data, the output quality degraded while still being able to maintain intelligible speech; with 24 minutes of training data, Tacotron 2 failed to produce intelligible speech. The same year saw the emergence of HiFi-GAN, a generative adversarial network (GAN)-based vocoder that improved the efficiency of waveform generation while producing high-fidelity speech, followed by Glow-TTS, which introduced a flow-based approach that allowed for both fast inference and voice style transfer capabilities. Chinese tech companies like Baidu and ByteDance also made contributions to the field by developing breakthroughs that further advanced the technology. === 2016–2020: Conception and development === 15.ai was conceived in 2016 as a research project in deep learning speech synthesis by a developer known as 15 (at the age of 18) during their freshman year at MIT as part of its Undergraduate Research Opportunities Program. 15 was inspired by DeepMind's WaveNet paper, with development continuing through their studies as Google AI released Tacotron 2 the following year. By 2019, they had demonstrated at MIT their ability to replicate WaveNet and Tacotron 2's results using 75% less training data than previously required. The name "15.ai" is a reference to the developer's statement that a voice can be cloned with as little as 15 seconds of data. 15 had originally planned to pursue a PhD based on their undergraduate research, but opted to work in the tech industry instead after their startup was accepted into the Y Combinator accelerator in 2019. After their departure in early 2020, 15 returned to their voice synthesis research and began implementing it as a web application. According to a post on X from 15, instead of using conventional voice datasets like LJSpeech that contained simple, monotone recordings, they sought out more challenging voice samples that could demonstrate the model's ability to handle complex speech patterns and emotional undertones. During this phase, 15 discovered the Pony Preservation Project, a collaborative project started by /mlp/, the My Little Pony board on 4chan. Contributors of the project had manually trimmed, denoised, transcribed, and emotion-tagged thousands of voice lines from My Little Pony: Friendship Is Magic and had compiled them into a dataset that provided ideal training material for 15.ai. === 2020–2022: Release and operation === 15.ai was released on March 2, 2020 as a free and non-commercial web application that did not require user registration to use, but did require the user to accept its terms of service before proceeding. At the time of its launch, the platform had a limited selection of available characters, including those from My Little Pony: Friendship Is Magic and Team Fortress 2. Users were permitted to create any content with the synthesized voices under two conditions: they had to properly credit 15.ai by including "15.ai" in any posts, videos, or projects using the generated audio; and they were prohibited from mixing 15.ai outputs with other text-to-speech outputs in the same work to prevent misrepresentation of the technology's capabilities. On March 8, 2020, Tyler McVicker of Valve News Network uploaded a YouTube video showcasing 15.ai. More voices were added to the website in the following months. In late 2020, 15 implemented a multi-speaker embedding in the deep neural network, which enabled the simultaneous training of multiple voices. Following this, the website's roster expanded from eight to over fifty characters. In addition, this implementation allowed the deep learning model to recognize common emotional patterns across different characters, even when certain emotions were missing from the characters' training data. By May 2020, the site had served over 4.2 million audio files to users. In early 2021, the application gained popularity after skits, memes, and fan content created using 15.ai went viral on Twitter, TikTok, Reddit, Twitch, Facebook, and YouTube. At its peak, the platform incurred operational costs of US$12,000 per month from AWS infrastructure needed to handle millions of daily voice generations; despite receiving offers from companies to acquire 15.ai and its underlying technology, the website remained independent and was funded out of the personal previous startup earnings of the developer. === 2022: Voiceverse NFT controversy === On January 14, 2022, 15 discovered that a blockchain-based company called Voiceverse had generated voice lines using 15.ai, falsely showcased them on Twitter as a demonstration of their own voice technology without permission or attribution, and sold them as NFTs. This came shortly after 15 had stated in December 2021 that they had no interest in incorporating NFTs into their work. A screenshot of the log files posted by 15 showed that Voiceverse had generated audio of characters from My Little Pony: Friendship Is Magic using 15.ai and pitched them up to make them sound unrecognizable, a violation of 15.ai's terms of service, which explicitly prohibited commercial use and required proper attribution. When confronted with evidence, Voiceverse stated that their marketing team had used 15.ai without proper attribution while rushing to create a demo. In response, 15 tweeted "Go fuck yourself," which went viral, amassing hundreds of thousands of retweets and likes on Twitter in support of the developer. The tweets showcasing the stolen voices were subsequently deleted. ==== Aftermath ==== The controversy raised concerns about NFT projects, which, according to critics, were frequently associated with intellectual property theft and questionable business practices. The incident was documented in the AI Incident Database (AIID) and the AI, Alg
Read more →
Tridium

Tridium Inc. is an American engineering hardware and software company based in Richmond, Virginia, whose products facilitate and integrate the automation of building and other engineering control systems. Since November 2005, the company has operated as an independent business entity of Honeywell International Inc. == History == Tridium Inc. was founded in 1995. In 1999, Tridium launched the Niagara Framework, a software infrastructure that connects all systems and devices to a central console. In 2002, John Petze became president and CEO, replacing Jerry Frank. The company was acquired by Honeywell International Inc in 2005. == Products == Tridium's products facilitate by integrating building automation using open and proprietary communications protocols such as Modbus, Lonworks and BACnet. Tridium is the developer of Niagara Framework. The Niagara Framework is a universal software infrastructure that allows building controls integrators, HVAC and mechanical contractors to build custom, web-enabled applications for accessing, automating and controlling smart devices real-time via local network or over the Internet.
Read more →
C-RAN

C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G, 5G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network". == Background == Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells. There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times. == Evolution of base station architecture == === All-in-one macro base station === In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments. === Distributed base station === For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture. === C-RAN/Cloud-RAN === C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments. == Architecture overview == C-RAN architecture has the following characteristics that are distinct from other cellular architectures: Large scale centralized deployment: Allows many RRHs to connect to a centralized BBU pool. The maximum distance can be 20km in fiber link for 4G (LTE/LTE-A) systems, and even longer distances (40~80km) for 3G (WCDMA/TD-SCDMA) and 2G (GSM/CDMA) systems. Native support to Collaborative Radio technologies: Any BBU can talk with any other BBU within the BBU pool with very high bandwidth (10 Gbit/s and above) and low latency (10 μs level). This is enabled by the interconnection of BBUs in the pool. This is one major difference from BBU Hotelling, or base station Hotelling; in the latter case, the BBUs of different base stations are simply stacked together and have no direct link between them to allow physical layer co-ordination. Real-time virtualization capability based on open platform: This is different from traditional base stations built on proprietary hardware, where the software and hardware are close-sourced and provided by single vendors. In contrast, a C-RAN BBU pool is built on open hardware, like x86/ARM CPU based servers, and interface cards that handle fiber links to RRHs and inter-connections in the pool. Real-time virtualization ensures that resources in the pool can be allocated dynamically to base station software stacks, say 4G/3G/2G function modules from different vendors, according to network load. However, to satisfy the strict timing requirements of wireless communication systems, the real-time performance for C-RAN is at the level of tens of microseconds, which is two orders of magnitude better than the millisecond level 'real-time' performance usually seen in Cloud Computing environments. == Similar architecture and systems == KT, a telecom operator in the Republic of Korea, introduced a Cloud Computing Center (CCC) system in their 3G (WCDMA/HSPA) and 4G (LTE/LTE-A) network in 2011 and 2012. The concept of CCC is basically the same as C-RAN. SK Telecom has also deployed Smart Cloud Access Network (SCAN) and Advanced-SCAN in their 4G (LTE/LTE-A) network in Korea no later than 2012. In 2014, Airvana (now CommScope) introduced OneCell, a C-RAN-based small cell system designed for enterprises and public spaces. == Competing architectures in cellular network evolution == === All-in-one BTS === One major alternative solution that is addressing similar challenges of RAN, is the small size, all-in-one outdoor BTS. Thanks to the achievements in the semiconductor industry, all the functionality of a BTS, including RF, baseband processing, MAC processing and package level processing, can now be implemented in a volume of <50 liters. This makes the system small and weatherproof, reduces the difficulty of BTS site choice and construction, eliminates the air conditioning requirement, and thus reduces operational costs. However, because each BTS is still working on its own, it cannot readily make use of the collaboration algorithms to reduce the interference between neighboring BTSs. It is also relatively hard to upgrade or repair because the all-in-one BTS units are usually mounted near the antenna. More processing units in less-protected environments also implies a higher failure rate compared to C-RAN, which only has the RRU deployed outdoors. The advantage of Cloud RAN lies in its ability to implement LTE-Advanced features such as Coordinated MultiPoint (CoMP) with very low latency between multiple radio heads. However, the economic benefit of improvements such as CoMP can be negated by the higher backhaul costs for some operators. === Small cell === The main competition between small cell and C-RAN occurs in two deployment scenarios: outdoor hotspot coverage and indoor coverage. == Academic research and publications == As one of the promising evolution paths for future cellular network architecture, C-RAN has attracted high academic research interest. Meanwhile, because the native support of cooperative radio capability built into the C-RAN architecture, it also enables many advanced algorithms that were hard to implement in cellular networks, including Cooperative Multi-Point Transmission/Receiving, Network Coding, etc. In October 2011, Wireless World Research Forum 27 was hosted in Germany, when China Mobile was invited to give a C-RAN presentation. In August 2012, IEEE C-RAN 2012 workshop was hosted in Kunming, China. CRC Press published a book, "Green Communications: Theore
Read more →
Hi uTandem

Hi uTandem, also known as uTandem, is a free language exchange mobile app. It helps people to connect with other language learners in order to carry out face-to-face language exchange sessions and also offers learners lists of businesses in the field of language learning or language exchange. == Use == Hi uTandem is built around the concept of language exchange, which is a method of language learning based on mutual oral linguistic exchange between partners. Ideally, each partner is a native speaker of the language they are helping their counterpart to learn. The app designed for users to chat with other users and translate messages, find suitable language partners and to locate language schools, bars, cafés and language exchange groups around them. == Team and development == Hi uTandem was released in January, 2016. The initial idea was conceived by Alberto Rodríguez as part of a team of eight Spanish youngsters. Hi uTandem belongs to the company Velvor Tech S.L., founded by the same members and registered in Ronda (Spain). == Reception == Hi uTandem was listed on the Top 4 Apps to Learn Languages list by ElPlural.com and since its launch it has been featured in numerous online and physical sources, including 20 minutos, Europapress, ABC Andalucía and Telefónica's Think Big Blog.
Read more →
Data cube

In computer programming, a data cube (or datacube) is a multi-dimensional array of values. Typically, the term "data cube" is applied in contexts where these arrays are massively larger than the hosting computer's main memory; examples include multi-terabyte/petabyte data warehouses and time series of image data. Even though it is called a cube, a data cube generally is a multi-dimensional concept which can be 1-dimensional, 2-dimensional, 3-dimensional, or higher-dimensional. The data cube is used to represent data (sometimes called facts) along some dimensions of interest. In satellite image timeseries, dimensions would be latitude and longitude coordinates and time; a fact (sometimes called measure) would be a pixel at a given space and time as taken by the satellite. For example, in online analytical processing, an OLAP cube about a company would have dimensions that could be the company subsidiaries, the company products, and time; in this setup, a fact would be a sales event where a particular product has been sold in a particular subsidiary at a particular time. In any case, every dimension divides data into groups of cells whereas each cell in the cube represents a single measure of interest. Sometimes cubes hold only a few values with the rest being empty, i.e. undefined, while sometimes most or all cube coordinates hold a cell value. In the first case such data are called sparse, and in the second case they are called dense, although there is no hard delineation between the two. Data cubes may be stored in database management systems (DBMS) as part of array DBMS. Spatio-temporal databases and geospatial databases may also be represented as coverage data. == History == Multi-dimensional arrays have long been familiar in programming languages. Fortran offers arbitrarily-indexed 1-D arrays and arrays of arrays, which allows the construction of higher-dimensional arrays, up to 15 dimensions. APL supports n-D arrays with a rich set of operations. All these have in common that arrays must fit into the main memory and are available only while the particular program maintaining them (such as image processing software) is running. A series of data exchange formats support storage and transmission of data cube-like data, often tailored towards particular application domains. Examples include MDX for statistical (in particular, business) data, Zarr and Hierarchical Data Format for general scientific data, and TIFF for imagery. In 1992, Peter Baumann introduced management of massive data cubes with high-level user functionality combined with an efficient software architecture. Datacube operations include subset extraction, processing, fusion, and in general queries in the spirit of data manipulation languages like SQL. Some years after, the data cube concept was applied to describe time-varying business data as data cubes by Jim Gray, et al., and by Venky Harinarayan, Anand Rajaraman and Jeff Ullman. Around that time, a working group on Multi-Dimensional Databases ("Arbeitskreis Multi-Dimensionale Datenbanken") was established at German Gesellschaft für Informatik. Datacube Inc. was an image processing company selling hardware and software applications for the PC market in 1996, however without addressing data cubes as such. The EarthServer initiative has established geo data cube service requirements. == Standardization == In 2018, the ISO SQL database language was extended with data cube functionality as "SQL – Part 15: Multi-dimensional arrays (SQL/MDA)". Web Coverage Processing Service is a geo data cube analytics language issued by the Open Geospatial Consortium in 2008. In addition to the common data cube operations, the language knows about the semantics of space and time and supports both regular and irregular grid data cubes, based on the concept of coverage data. An industry standard for querying business data cubes, originally developed by Microsoft, is MultiDimensional eXpressions. == Implementation == Many high-level computer languages treat data cubes and other large arrays as single entities distinct from their contents. These languages, of which Fortran, APL, IDL, NumPy, PDL, and S-Lang are examples, allow the programmer to manipulate complete film clips and other data en masse with simple expressions derived from linear algebra and vector mathematics. Some languages (such as PDL) distinguish between a list of images and a data cube, while many (such as IDL) do not. Array DBMSs (Database Management Systems) offer a data model which generically supports definition, management, retrieval, and manipulation of n-dimensional data cubes. This database category has been pioneered by the rasdaman system since 1994. == Applications == Multi-dimensional arrays can meaningfully represent spatio-temporal sensor, image, and simulation data, but also statistics data where the semantics of dimensions is not necessarily of spatial or temporal nature. Generally, any kind of axis can be combined with any other into a data cube. === Mathematics === In mathematics, a one-dimensional array corresponds to a vector, a two-dimensional array resembles a matrix; more generally, a tensor may be represented as an n-dimensional data cube. === Science and engineering === For a time sequence of color images, the array is generally four-dimensional, with the dimensions representing image X and Y coordinates, time, and RGB (or other color space) color plane. For example, the EarthServer initiative unites data centers from different continents offering 3-D x/y/t satellite image timeseries and 4-D x/y/z/t weather data for retrieval and server-side processing through the Open Geospatial Consortium WCPS geo data cube query language standard. A data cube is also used in the field of imaging spectroscopy, since a spectrally-resolved image is represented as a three-dimensional volume. Earth observation data cubes combine satellite imagery such as Landsat 8 and Sentinel-2 with Geographic information system analytics. === Business intelligence === In online analytical processing (OLAP), data cubes are a common arrangement of business data suitable for analysis from different perspectives through operations like slicing, dicing, pivoting, and aggregation.
Read more →
Jive (software)

Jive (formerly known as Clearspace, then Jive SBS, then Jive Engage) is a commercial Java EE-based Enterprise 2.0 collaboration and knowledge management tool produced by Jive Software. It was first released as "Clearspace" in 2006, then renamed SBS (for "Social Business Software") in March 2009, then renamed "Jive Engage" in 2011, and renamed simply to "Jive" in 2012. Jive integrates the functionality of online communities, microblogging, social networking, discussion forums, blogs, wikis, and IM under one unified user interface. Content placed into any of the systems (blog, wiki, documentation, etc.) can be found through a common search interface. Other features include RSS capability, email integration, a reputation and reward system for participation, personal user profiles, JAX-WS web service interoperability, and integration with the Spring Framework. The product is a pure-Java server-side web application and will run on any platform where Java (JDK 1.5 or higher) is installed. It does not require a dedicated server - users have reported successful deployment in both shared environments and multiple machine clusters. As of Jive 8, released March 30, 2015, there is a Jive-n version which is for internal use (hosted by the consumer or hosted by Jive as a service) and a Jive-x version which is an external version hosted as a service. Jive no longer supports wiki markup language. == Server requirements for Jive 8-n == The following are the server requirements for Jive 8-n Operating systems: RHEL version 6 or 7 for x86_64, CentOS version 6 or 7 for x86_64 or SuSE Enterprise Linux Server (SLES) 11 and 12 for x86_64 Application Servers: Jive ships with its own embedded Apache HTTPD and Tomcat servers as part of the install package. It is not possible to deploy the application onto other appservers. Databases: MySQL (5.1, 5.5, 5.6) Oracle (11gR2, 12c) Postgres (9.0, 9.1, 9.2, 9.3, 9.4 - 9.2 or higher recommended) Microsoft SQL Server (2008R2, 2012, 2014) Environment: Jive recommends a server with at least 4GB of RAM and a dual-core 2 GHz processor with x86_64 architecture The product integrates with an LDAP repository or Active Directory For optimal deployment with a large community Jive Software recommends: using dedicated cache and document-conversion servers hosting the application and database servers separately == Releases == Jive 8, released on March 30, 2015 Jive 7, released in October 2013 Jive 9.0.x, released in November 2016 Jive 9, released in November 2016, supported now
Read more →
Software construction

Software construction is the process of creating working software via coding and integration. The process includes unit and integration testing although does not include higher level testing such as system testing. Construction is an aspect of the software development lifecycle and is integrated in the various software development process models with varying focus on construction as an activity separate from other activities. In the waterfall model, a software development effort consists of sequential phases including requirements analysis, design, and planning which are prerequisites for starting construction. In an iterative model such as scrum, evolutionary prototyping, or extreme programming, construction as an activity that occurs concurrently or overlapping other activities. Construction planning may include defining the order in which components are created and integrated, the software quality management processes, and the allocation of tasks to teams and developers. To facilitate project management, numerous construction aspects can be measured; these include the amount of code developed, modified, reused, and destroyed, code complexity, code inspection statistics, faults-fixed and faults-found rates, and effort expended. These measurements can be useful for aspects such as ensuring quality and improving the process. == Activities == Construction includes many activities. === Coding === The following are a few of the key aspects of the coding activity: Naming Choice of name for each identifier. One study showed that the effort required to debug a program is minimized when variable names are between 10 and 16 characters. Logic Organization into statements and routines Highly cohesive routines proved to be less error prone than routines with lower cohesion. A study of 450 routines found that 50 percent of the highly cohesive routines were fault free compared to only 18 percent of routines with low cohesion. Another study of a different 450 routines found that routines with the highest coupling-to-cohesion ratios had 7 times as many errors as those with the lowest coupling-to-cohesion ratios and were 20 times as costly to fix. Although studies showed inconclusive results regarding the correlation between routine sizes and the rate of errors in them, but one study found that routines with fewer than 143 lines of code were 2.4 times less expensive to fix than larger routines. Another study showed that the code needed to be changed least when routines averaged 100 to 150 lines of code. Another study found that structural complexity and amount of data in a routine were correlated with errors regardless of its size. Interfaces between routines are some of the most error-prone areas of a program. One study showed that 39 percent of all errors were errors in communication between routines. Unused parameters are correlated with an increased error rate. In one study, only 17 to 29 percent of routines with more than one unreferenced variable had no errors, compared to 46 percent in routines with no unused variables. The number of parameters of a routine should be 7 at maximum as research has found that people generally cannot keep track of more than about seven chunks of information at once. One experiment showed that designs which access arrays sequentially, rather than randomly, result in fewer variables and fewer variable references. One experiment found that loops-with-exit are more comprehensible than other kinds of loops. Regarding the level of nesting in loops and conditionals, studies have shown that programmers have difficulty comprehending more than three levels of nesting. Control flow complexity has been shown to correlate with low reliability and frequent errors. Modularity Structuring and refactoring the code into classes, packages and other structures. When considering containment, the maximum number of data members in a class shouldn't exceed 7±2. Research has shown that this number is the number of discrete items a person can remember while performing other tasks. When considering inheritance, the number of levels in the inheritance tree should be limited. Deep inheritance trees have been found to be significantly associated with increased fault rates. When considering the number of routines in a class, it should be kept as small as possible. A study on C++ programs has found an association between the number of routines and the number of faults. A study by NASA showed that the putting the code into well-factored classes can double the code reusability compared to the code developed using functional design. Error handling Encoding logic to handle both planned and unplanned errors and exceptions. Resource management Managing computational resource use via exclusion mechanisms and discipline in accessing serially reusable resources, including threads or database locks. Security Prevention of code-level security breaches such as buffer overrun and array index overflow. Optimization Optimization while avoiding premature optimization. Documentation Both embedded in the code as comments and as external documents. === Integration === Integration is about combining separately constructed parts. Concerns include planning the sequence in which components will be integrated, creating scaffolding to support interim versions of the software, determining the degree of testing and quality work performed on components before they are integrated, and determining points in the project at which interim versions are tested. === Testing === Testing can reduce the time between when faulty logic is inserted in the code and when it is detected. In some cases, testing is performed after code has been written, but in test-first programming, test cases are created before code is written. Construction includes at least two forms of testing, often performed by the developer who wrote the code: unit testing and integration testing. === Reuse === Software reuse entails more than creating and using libraries. It requires formalizing the practice of reuse by integrating reuse processes and activities into the software life cycle. The tasks related to reuse in software construction during coding and testing may include: selection of the reusable code, evaluation of code or test re-usability, reporting reuse metrics. === Quality assurance === Techniques for ensuring quality as software is constructed include: Testing One study found that the average defect detection rates of Unit testing and integration testing are 30% and 35% respectively. Software inspection With respect to software inspection, one study found that the average defect detection rate of formal code inspections is 60%. Regarding the cost of finding defects, a study found that code reading detected 80% more faults per hour than testing. Another study shown that it costs six times more to detect design defects by using testing than by using inspections. A study by IBM showed that only 3.5 hours were needed to find a defect through code inspections versus 15–25 hours through testing. Microsoft has found that it takes 3 hours to find and fix a defect by using code inspections and 12 hours to find and fix a defect by using testing. In a 700 thousand lines program, it was reported that code reviews were several times as cost-effective as testing. Studies found that inspections result in 20% - 30% fewer defects per 1000 lines of code than less formal review practices and that they increase productivity by about 20%. Formal inspections will usually take 10% - 15% of the project budget and will reduce overall project cost. Researchers found that having more than 2 - 3 reviewers on a formal inspection doesn't increase the number of defects found, although the results seem to vary depending on the kind of material being inspected. Technical review With respect to technical review, one study found that the average defect detection rates of informal code reviews and desk checking are 25% and 40% respectively. Walkthroughs were found to have a defect detection rate of 20% - 40%, but were found also to be expensive especially when project pressures increase. Code reading was found by NASA to detect 3.3 defects per hour of effort versus 1.8 defects per hour for testing. It also finds 20% - 60% more errors over the life of the project than different kinds of testing. A study of 13 reviews about review meetings, found that 90% of the defects were found in preparation for the review meeting while only around 10% were found during the meeting. Static analysis With respect to Static analysis (IEEE1028), studies have shown that a combination of these techniques needs to be used to achieve a high defect detection rate. Other studies showed that different people tend to find different defects. One study found that the extreme programming practices of pair programming, desk checking, unit testing, integration testing, and regression testing can achieve a 90% defect detection rate. An experiment involving exper
Read more →
Kernel Assisted Superuser

Kernel Assisted Superuser (short: KernelSU) is an alternative method for obtaining root privileges on Android devices. KernelSU implementations are developed as free and open-source software under the terms of the GPLv3 license. == Technical differences == KernelSU differs from other methods in that root access is implemented directly in the kernel. Compared to other root methods that run in userspace, such as Magisk, this has the advantage that commands with su can be executed like normal commands, but still have root privileges. This is not prevented by SELinux or detected by the PlayIntegrity API check, so applications that use it will continue to function. Unlike Magisk, /system/bin/su is a virtual file implemented by hooking system calls with kprobes, and overlayfs is used for systemless modifications to the system partition instead of magic mount. == History == The planning of KernelSU was started in 2018 by developer Jason Donenfeld, also known as XDA user zx2c4. The lack of a root manager app and the difficulty of creating boot images meant that KernelSU was not suitable for productive use, and for a long time this method remained theoretical and could only be used by developers. In 2021, Google launched Generic Kernel Images (GKI for short), which facilitates the creation of a set of device-independent rooted boot images. In response, the developer known on XDA as weishu, who had also worked on projects such as VirtualXposed, adapted KernelSU for GKI-compatible kernels. The adaptation, which was released in January 2023, ensures that any device booting with Linux kernel version 5.10 or higher should be compatible. In addition, the developer also offers a special manager app that, in addition to managing root privileges, also offers overlay-based modding similar to Magisk modules. As of November 2025, 310 developers have contributed to the development of the KernelSU implementation. == Distribution == KernelSU can be installed on all devices that use GKI, as well as on individually supported devices without GKI. Some custom ROMs already have it integrated by default, including ROMs such as CrDroid, Bliss OS, and Evolution X.
Read more →
AlternativeTo

AlternativeTo is a website which lists alternatives to web-based software, desktop computer software, and mobile apps, and sorts the alternatives by various criteria, including the number of registered users who have "Liked" each of them on AlternativeTo. Users can search the site to find better alternatives to an application they are using or previously have used, including free alternatives such as free web applications (cloud computing) which don't require any installation and can be accessed from any browser. == Differences == Unlike a number of other software directory websites, the software is not arranged into categories, but each individual piece of software has its own list of alternatives. However, users can also search by tag to find software, which offers an alternative way of finding related software. Users can also narrow their search by focusing on particular platforms and license types (such as "free for non-commercial use"). AlternativeTo lists basic information such as platform and license type at the top of each entry, but does not have comparison tables listing software features side by side. AlternativeTo does not host software for download but it provides links to official websites to where you can download or buy them. AlternativeTo allows anyone to register and suggest new alternatives, or to update the information held about existing entries. Suggestions and alterations are reviewed before being made publicly visible. Users can register using either email and password or OpenID. Login with Facebook has been discontinued. As AlternativeTo is itself a web application, it even has a page for alternatives to itself. == Features == Tweets from anyone mentioning particular pieces of software are also pulled in dynamically from Twitter. Each application has an RSS feed for notifying users of newly listed alternatives to that application. After a user has clicked the Like button next to an application, they are offered the opportunity to tell their friends on Facebook or their followers on Twitter that they liked it. The site also has a forum. For software developers, a JSON API used to be available, but has been taken down indefinitely.
Read more →
Web development

Web development is the process of designing, developing and maintaining websites and web apps. Web development encompasses several different fields, most commonly referring to the programming of websites. Front-end development is the act of developing the user interface and client-side code, while back-end development focuses on the infrastructure behind a website, mainly server-side code. Since the World Wide Web was released publicly in 1993, web development has evolved greatly, with websites changing from a collection of static HTML pages to complex projects using frameworks, servers, and databases. == Overview == Web development includes many individual tasks, including web design, web content development, networking, and coding. Among web professionals, "web development" usually refers to the main non-design aspects of building websites: writing markup and coding. Web development is generally split into two fields: front-end development and back-end development. Front-end developers create the user interface of websites, turning web designs into HTML, CSS, and JavaScript code. Front-end developers must also make sure that websites work consistently across different browsers and devices. Back-end development, also known as server-side development, focuses on the infrastructure behind a website, including APIs, database management, and security. Some choose to be full-stack developers, meaning they work on both the front-end and back-end. == History == The World Wide Web is often categorised into three generations: Web 1.0, Web 2.0, and Web 3.0 (or Web3). It was invented in 1989, and released to the public in 1993. In the early years of the web, restrospecitvely referred to as Web 1.0, websites were simply a collection of static HTML files, and had limited interactivity. After the introduction of JavaScript in 1995, websites could contain logic, allowing for interactivity. The following year CSS was released, allowing greater control over the styling of web pages. In 1999, the term Web 2.0 was coined by Darcy DiNucci. The term later resurfaced in the early 2000s, as websites started to increase in complexity, requiring server-side services in addition to JavaScript. This led to the emergence of various new programming languages and frameworks designed for backend services, such as PHP, Active Server Pages, and Jakarta Server Pages. This enabled websites to do additional server-side processing, such as accessing databases. Another shift in web development was the release of the iPhone in 2007. This created a new medium for accessing the web, requiring a new approach to web development, and resulting in responsive web design, which allows a single website to appear different depending on the device running it. Later, progressive web apps were introduced, allowing websites to be installed on a device as an independent application. In the 2010s, JavaScript frameworks began to emerge, creating new ways to manipulate web pages, and increasing compatibility between web browsers. JQuery was popular in the early 2010s, but was later surpassed by other frameworks such as React and Vue.js. In the mid 2020s, use of AI became prevalent among web developers, with the 2025 Stack Overflow survey showing over 80% of developers saying the use AI at least monthly in their development process.
Read more →