AI Content Update Google

AI Content Update Google — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Hallucination (artificial intelligence)

    Hallucination (artificial intelligence)

    In the field of artificial intelligence (AI), a hallucination or artificial hallucination (also called bullshitting, confabulation, or delusion) is a response generated by AI that contains false or misleading information presented as fact. This term draws a loose analogy with human psychology, where a hallucination typically involves false percepts. For example, a chatbot powered by large language models (LLMs), like ChatGPT, may embed plausible-sounding random falsehoods within its generated content. Detecting and mitigating errors and hallucinations pose significant challenges for practical deployment and reliability of LLMs in high-stakes scenarios, such as chip design, supply chain logistics, and medical diagnostics. Some software engineers and statisticians have criticized the specific term "AI hallucination" for unreasonably anthropomorphizing computers. Symbolic artificial intelligence models generally do not produce hallucinations, unlike large language models. == Term == === Origin === Since the 1980s, the term "hallucination" has been used in computer vision with a positive connotation to describe the process of adding detail to an image. For example, the task of generating high-resolution face images from low-resolution inputs is called face hallucination. The first documented use of the term "hallucination" in this sense is in the PhD thesis of Eric Mjolsness in 1986. A notable work is the face hallucination algorithm by Simon Baker and Takeo Kanade published in 1999. In the 2000s, hallucinations were described in statistical machine translation as a failure mode. Since the 2010s, the term has undergone a semantic shift to signify the generation of factually incorrect or misleading outputs by AI systems in tasks like machine translation and object detection. In 2015, hallucinations were identified in visual semantic role labeling tasks by Saurabh Gupta and Jitendra Malik. In 2015, computer scientist Andrej Karpathy used the term "hallucinated" in a blog post to describe his recurrent neural network (RNN) language model generating an incorrect citation link. In 2017, Google researchers used the term to describe the responses generated by neural machine translation (NMT) models when they are not related to the source text, and in 2018, the term was used in computer vision to describe instances where non-existent objects are erroneously detected because of adversarial attacks. In July 2021, Meta warned during its release of BlenderBot 2 that the system is prone to "hallucinations", which Meta defined as "confident statements that are not true". Following OpenAI's ChatGPT release in beta version in November 2022, some users complained that such chatbots often seem to pointlessly embed plausible-sounding random falsehoods within their generated content. Many news outlets, including The New York Times, started to use the term "hallucinations" to describe these models' frequently incorrect or inconsistent responses. In 2023, the Cambridge dictionary updated its definition of hallucination to include this new sense specific to the field of AI. Some researchers have highlighted a lack of consistency in how the term is used, but also identified several alternative terms in the literature, such as confabulations, fabrications, and factual errors. === Definitions and alternatives === Uses, definitions and characterizations of the term "hallucination" in the context of LLMs include: "a tendency to invent facts in moments of uncertainty" (OpenAI, May 2023) "a model's logical mistakes" (OpenAI, May 2023) "fabricating information entirely, but behaving as if spouting facts" (CNBC, May 2023) "making up information" (The Verge, February 2023) "probability distributions" (in scientific contexts) Journalist Benj Edwards, in Ars Technica, writes that the term "hallucination" is controversial, but that some form of metaphor remains necessary; Edwards suggests "confabulation" as an analogy for processes that involve "creative gap-filling". In July 2024, a White House report on fostering public trust in AI research mentioned hallucinations only in the context of reducing them. Notably, when acknowledging David Baker's Nobel Prize-winning work with AI-generated proteins, the Nobel committee avoided the term entirely, instead referring to "imaginative protein creation". Hicks, Humphries, and Slater, in their article in Ethics and Information Technology, argue that the output of LLMs is "bullshit" under Harry Frankfurt's definition of the term, and that the models are "in an important way indifferent to the truth of their outputs", with true statements only accidentally true, and false ones accidentally false. Some researchers also use the derogatory term "botshit", often referring to uncritical use of AI. === Criticism === In the scientific community, some researchers avoid the term "hallucination", seeing it as potentially misleading. It has been criticized by Usama Fayyad, executive director of the Institute for Experimental Artificial Intelligence at Northeastern University, on the grounds that it misleadingly personifies large language models and is vague. Mary Shaw said, "The current fashion for calling generative AI's errors 'hallucinations' is appalling. It anthropomorphizes the software, and it spins actual errors as somehow being idiosyncratic quirks of the system even when they're objectively incorrect." In Salon, statistician Gary Smith argues that LLMs "do not understand what words mean" and consequently that the term "hallucination" unreasonably anthropomorphizes the machine. Murray Shanahan argues that anthropomorphic framing of LLM capabilities, including terms like "hallucination", encourages users and researchers to attribute cognitive processes to systems that operate through statistical pattern completion, and advocates for more careful linguistic practices when discussing LLM behavior. Kristina Šekrst argues that applying psychological vocabulary to LLM outputs obscures the difference between the appearance of mental properties and their genuine presence. Förster & Skop assert that tech companies use the hallucination metaphor to anthropomorphize models and deflect responsibility for non-factual outputs. Some see the AI outputs not as illusory but as prospective—that is, having some chance of being true, similar to early-stage scientific conjectures. The term has also been criticized for its association with psychedelic drug experiences. == In natural language generation == In natural language generation, there are several reasons why natural language models hallucinate: === Hallucination from data === Hallucinations can stem from incomplete, inaccurate or unrepresentative data sets. === Modeling-related causes === The pre-training of generative pretrained transformers (GPT) involves predicting the next word. It incentivizes GPT models to "give a guess" about what the next word is, even when they lack information. Some researchers take an anthropomorphic perspective and posit that hallucinations arise from a tension between novelty and usefulness. For instance, Amabile and Pratt define human creativity as the production of novel and useful ideas. By extension, a focus on novelty in machine creativity can lead to the production of original but inaccurate responses—that is, falsehoods—whereas a focus on usefulness may result in memorized content lacking originality. By 2022, newspapers such as The New York Times expressed concern that, as the adoption of bots based on large language models continued to grow, unwarranted user confidence in bot output could lead to problems. === Interpretability research === In 2025, interpretability research by Anthropic on the LLM Claude identified internal circuits that cause it to decline to answer questions unless it knows the answer. By default, the circuit is active and the LLM doesn't answer. When the LLM has sufficient information, these circuits are inhibited and the LLM answers the question. Hallucinations were found to occur when this inhibition happens incorrectly, such as when Claude recognizes a name but lacks sufficient information about that person, causing it to generate plausible but untrue responses. === Examples === On 15 November 2022, researchers from Meta AI published Galactica, designed to "store, combine and reason about scientific knowledge". Content generated by Galactica came with the warning: "Outputs may be unreliable! Language Models are prone to hallucinate text." In one case, when asked to draft a paper on creating avatars, Galactica cited a fictitious paper from a real author who works in the relevant area. Meta withdrew Galactica on 17 November due to offensiveness and inaccuracy. OpenAI's ChatGPT, released in beta version to the public on November 30, 2022, was based on the foundation model GPT-3.5 (a revision of GPT-3). Professor Ethan Mollick of Wharton called it an "omniscient, eager-to-please intern who sometimes lies to you". Data scientist Teresa Kuba

    Read more →
  • Plum Voice

    Plum Voice

    The Plum Group, Inc. (DBA Plum Voice) is a company. Plum is headquartered in New York City with offices in Boston and Denver. == History == Plum Voice, founded in 2000 as The Plum Group, Inc., was incorporated to create technologies for personalized audio communication. By 2001, Plum had commercialized the open-standard Plum VoiceXML IVR platform which facilitated the creation of dynamic telecom applications. 2001 - Commercial launch of Plum VoiceXML IVR platform for customer-premises deployment 2002 - Launch of Plum Voice Hosting Centers for 24x7x365 managed IVR hosting 2004 - Plum Voice application suite receives a "Product of the Year" award from Customer Interactions magazine 2008 - Plum Survey builder launched, a do-it-yourself IVR survey tool. 2010 - Plum launched QuickFuse, a web-based rapid development platform used to create voice applications. 2013 - Plum launched VoiceTrends, an analytics and reporting toolkit designed specifically for voice applications. Plum achieves PCI-DSS Level 1. 2015 - Plum launched Plum Insight, a multi-channel (voice, web, mobile) survey platform. Plum achieves HIPAA compliance. 2016 - Plum launched a new version of QuickFuse called Fuse+. 2020 - Plum sunsets QuickFuse, rebrands Fuse+ as Plum Fuse.

    Read more →
  • Flexidraw

    Flexidraw

    Flexidraw is a 1985 graphics computer program published by Inkwell Systems. == Gameplay == Flexidraw is a graphics program that allows users to produce drawings using a light pen and print them. == Reception == Roy Wagner reviewed the product for Computer Gaming World, and stated that "Of the many graphics programs available Flexidraw is certainly the best supported by it's [sic] parent company."

    Read more →
  • Time-inhomogeneous hidden Bernoulli model

    Time-inhomogeneous hidden Bernoulli model

    Time-inhomogeneous hidden Bernoulli model (TI-HBM) is an alternative to hidden Markov model (HMM) for automatic speech recognition. Contrary to HMM, the state transition process in TI-HBM is not a Markov-dependent process, rather it is a generalized Bernoulli (an independent) process. This difference leads to elimination of dynamic programming at state-level in TI-HBM decoding process. Thus, the computational complexity of TI-HBM for probability evaluation and state estimation is O ( N L ) {\displaystyle O(NL)} (instead of O ( N 2 L ) {\displaystyle O(N^{2}L)} in the HMM case, where N {\displaystyle N} and L {\displaystyle L} are number of states and observation sequence length respectively). The TI-HBM is able to model acoustic-unit duration (e.g. phone/word duration) by using a built-in parameter named survival probability. The TI-HBM is simpler and faster than HMM in a phoneme recognition task, but its performance is comparable to HMM. For details, see [1] or [2].

    Read more →
  • Schema-agnostic databases

    Schema-agnostic databases

    Schema-agnostic databases or vocabulary-independent databases aim at supporting users to be abstracted from the representation of the data, supporting the automatic semantic matching between queries and databases. Schema-agnosticism is the property of a database of mapping a query issued with the user terminology and structure, automatically mapping it to the dataset vocabulary. The increase in the size and in the semantic heterogeneity of database schemas bring new requirements for users querying and searching structured data. At this scale it can become unfeasible for data consumers to be familiar with the representation of the data in order to query it. At the center of this discussion is the semantic gap between users and databases, which becomes more central as the scale and complexity of the data grows. == Description == The evolution of data environments towards the consumption of data from multiple data sources and the growth in the schema size, complexity, dynamicity and decentralisation (SCoDD) of schemas increases the complexity of contemporary data management. The SCoDD trend emerges as a central data management concern in Big Data scenarios, where users and applications have a demand for more complete data, produced by independent data sources, under different semantic assumptions and contexts of use, which is the typical scenario for Semantic Web Data applications. The evolution of databases in the direction of heterogeneous data environments strongly impacts the usability, semiotics and semantic assumptions behind existing data accessibility methods such as structured queries, keyword-based search and visual query systems. With schema-less databases containing potentially millions of dynamically changing attributes, it becomes unfeasible for some users to become aware of the 'schema' or vocabulary in order to query the database. At this scale, the effort in understanding the schema in order to build a structured query can become prohibitive. == Schema-agnostic queries == Schema-agnostic queries can be defined as query approaches over structured databases which allow users satisfying complex information needs without the understanding of the representation (schema) of the database. Similarly, Tran et al. defines it as "search approaches, which do not require users to know the schema underlying the data". Approaches such as keyword-based search over databases allow users to query databases without employing structured queries. However, as discussed by Tran et al.: "From these points, users however have to do further navigation and exploration to address complex information needs. Unlike keyword search used on the Web, which focuses on simple needs, the keyword search elaborated here is used to obtain more complex results. Instead of a single set of resources, the goal is to compute complex sets of resources and their relations." The development of approaches to support natural language interfaces (NLI) over databases have aimed towards the goal of schema-agnostic queries. Complementarily, some approaches based on keyword search have targeted keyword-based queries which express more complex information needs. Other approaches have explored the construction of structured queries over databases where schema constraints can be relaxed. All these approaches (natural language, keyword-based search and structured queries) have targeted different degrees of sophistication in addressing the problem of supporting a flexible semantic matching between queries and data, which vary from the completely absence of the semantic concern to more principled semantic models. While the demand for schema-agnosticism has been an implicit requirement across semantic search and natural language query systems over structured data, it is not sufficiently individuated as a concept and as a necessary requirement for contemporary database management systems. Recent works have started to define and model the semantic aspects involved on schema-agnostic queries. === Schema-agnostic structured queries === Consist of schema-agnostic queries following the syntax of a structured standard (for example SQL, SPARQL). The syntax and semantics of operators are maintained, while different terminologies are used. ==== Example 1 ==== SELECT ?y { BillClinton hasDaughter ?x . ?x marriedTo ?y . } which maps to the following SPARQL query in the dataset vocabulary: ==== Example 2 ==== which maps to the following SPARQL query in the dataset vocabulary: === Schema-agnostic keyword queries === Consist of schema-agnostic queries using keyword queries. In this case the syntax and semantics of operators are different from the structured query syntax. ==== Example ==== "Bill Clinton daughter married to" "Books by William Goldman with more than 300 pages" == Semantic complexity == As of 2016 the concept of schema-agnostic queries has been developed primarily in academia. Most of schema-agnostic query systems have been investigated in the context of Natural Language Interfaces over databases or over the Semantic Web. These works explore the application of semantic parsing techniques over large, heterogeneous and schema-less databases. More recently, the individuation of the concept of schema-agnostic query systems and databases have appeared more explicitly within the literature. Freitas et al. provide a probabilistic model on the semantic complexity of mapping schema-agnostic queries.

    Read more →
  • Fatsecret

    Fatsecret

    Fatsecret, commonly styled as fatsecret, is a mobile application, website and API that helps people achieve their weight loss goals and find accurate nutrition information. It also offers a weight loss clinic with coaching and medically supported programs. The platform powers global health apps. == History == Fatsecret was founded in 2006 in Melbourne, Australia by Lenny Moses and Rodney Moses. As of 2019, Lenny serves as the company's CEO. The company is known for its calorie counting and meal tracking app, and by April 2016, the company claimed to have 45 million users of its services. In August 2018, a premium version of its app was released. Since August 2009, the company has operated the Fatsecret Platform API, which allows access to its global food and nutrition database. Fatsecret reportedly had 900,000 downloads of its app in January 2020. In an analysis of several Health & Fitness app subcategories for the United States in January 2021, Fatsecret was reported to have the highest 30 day user retention rate of top Calorie Counter + Meal Planner for Weight Loss apps.

    Read more →
  • VGACAD

    VGACAD

    VGACAD was the parent of a suite of shareware graphic utilities made for the MS-DOS operating system used in the IBM PC and clones. It was popular for editing and capturing images using BSAVE (graphics image format) and provided an early graphic editing suite compatible with multiple graphic cards and resolutions, used on the IBM PC. == Usage == Written by Lawrence Gozum in 1987, it was the genesis of multiple versions and improvements over 10 years. Ran with his brother, Marvin initially helped with design ideas, strategic focus, technical support calls, and managing the early shareware business. The growth of the VGACAD suite grew quickly to preoccupy most of their time. Lawrence then focused more of his efforts on software and formed Applied Insights, to manage VGACAD and its offspring, VidFun, and Ai Picture Explorer. At its peak, its users ranged from individuals, Federal government offices, museums and major newspapers. == Features == VGACAD was a misnomer, and meant VGA-Computer Assisted Drawing, rather than computer-aided design, as CAD is commonly referred to today. Its longevity was due to its color accuracy, speed, small size, and that its suite of small utilities often worked stand-alone. One called VGACAP, for 'capture', dumped video memory into a file that could later be converted to popular graphic image formats, later made commonplace when Microsoft Windows programmed the print screen key to dump graphics into the clipboard. However, VGACAP ran insulated apart from early versions of Windows, and thus could capture screens were applications prohibited such function.

    Read more →
  • RagTime

    RagTime

    RagTime is a frame-oriented business publishing software which combines word processing, spreadsheets, simple drawings, image processing, and charts, in a single document/program, integrated software. It is often used to create forms, reports, documentation, desktop publishing, and in office environments. Typical users are business clients, educational institutions, administrations, architects, and also private users. Ragtime includes the following modules: Page layout (forms, templates etc.) Word processing Image processing Spreadsheets, similar to Microsoft Excel Formulas and functions which can be used throughout, in text, graphics, and spreadsheets Charts in different types of diagrams Drawings in vector graphics including lines, polygons, Bézier curves and more Slide show (presentation of RagTime documents) Audio/video Buttons (pop-up menus, switches, and more) that can be used within RagTime documents Import/export of various file formats Support of the AppleScript scripting language available system-wide under macOS == Principle == RagTime differs from most other comparable programs or software packages in its strict frame-oriented design: all content is contained within frames on each page. The content can have a fixed position within its frame or, if it is text or a spreadsheet, flow into another frame that is connected to the first frame via a so-called “pipeline”. RagTime has no different document types for different types of data; all content is stored in a single compound document type. Thus, a RagTime document not only can contain multiple pages, but also multiple layouts within the same document; e.g. spreadsheets in addition to text and images. The RagTime filename extension is .rtd (RagTime document); for templates the extension is .rtt (RagTime template). The current version is RagTime 6.6.5. It is available for OS X (10.6-10.14) and Windows (XP/Vista/7/8/10). == Extensions == FileTime – allows accessing “FileMaker Pro” databases from RagTime documents under OS X RagTime Connect – ODBC database connection for RagTime 6 (Mac and Windows) Johannes – print extension for the simple creation of stapled or folded brochures, booklets etc. PowerFunctions – additional functions for a more effective creation of intelligent documents for exchanging data and for use in mixed Mac/Windows environments MetaFormula – SYLK-based extension that allows calculating text as formula == History == RagTime has been developed since 1985 for the Macintosh – originally named MacFrame – and was published in 1986. When released, it already had the present name, which was chosen following the then-available software package Lotus Jazz. In the European Macintosh market, RagTime quickly gained a prominent position that continues to this day, even though the market share has decreased. Despite repeated attempts, the program could not gain acceptance in the North American market due to its high cost ($395 in 1990). The North American sales office closed in 1991, shortly after Claris Corporation released ClarisWorks which duplicated much of the functionality of RagTime for a lower price. After the manufacturer – first Brüning & Everth, followed by B&E Software and today RagTime.de Development – had focused on the Macintosh only for a very long time, it also released a Windows version, RagTime 5.0, in 1999. However, the program could not assume great significance against established competitors, especially Microsoft Office. Until mid-2006 RagTime was, in addition to the commercial version, also available as a free version (RagTime Solo) for personal use. RagTime Solo included the same features and performance (except for spelling and Syllabification) dictionaries), but was not allowed for use in commercial environments. In other languages RagTime Solo was distributed as RagTime Privat. In a press release from July 5, 2006, RagTime announced the discontinuation of RagTime Solo: “… the RagTime Solo license conditions were often misinterpreted or deliberately flouted. Therefore we discontinued RagTime Solo, there will be no private version of RagTime 6 anymore.” After a successful start of the RagTime 6.0 software, sales edged significantly lower in the following years. Disagreements arose among the shareholders about the continuation of the company, which filed for bankruptcy in July 2007. As a result, the rights to RagTime were taken over by the newly established company RagTime.de Development GmbH, which was responsible for the development. The sales partner RagTime.de Sales GmbH distributed the RagTime products until October 2015. Today RagTime.de Development GmbH is also responsible for sales. The last level of development is the extensively revamped version RagTime 6.6 of 8 October 2015, which also includes new OS X features (e.g. high-resolution “Retina” displays) and supports Windows 10. == Programming == RagTime 1-3 were developed in Pascal, since version 4 the development is completely coded in C++. External programming and automation can be implemented via AppleScript on a Mac, and via OLE/COM-API (e.g. Visual Basic) under Windows. On a Mac, RagTime provides a comprehensive AppleScript library, for the automation of almost any task, from automatic document creation to the export of PDF documents. RagTime also supports “recordings” by use of the “AppleScript Editor”, which allows recording the interactive RagTime operation as an AppleScript program sequence. AppleScripts can be saved in the RagTime document and called via menu or shortcut keys. On Windows, RagTime (since version 6) disposes over an OLE/COM API, which allows automating many RagTime components via external programming. For that purpose there is a type library that installs the available RagTime OLE/COM object catalogue. Programming can be realized in all programming languages supported by Microsoft.

    Read more →
  • XLNet

    XLNet

    The XLNet was an autoregressive Transformer designed as an improvement over BERT, with 340M parameters and trained on 33 billion words. It was released on 19 June 2019, under the Apache 2.0 license. It achieved state-of-the-art results on a variety of natural language processing tasks, including language modeling, question answering, and natural language inference. == Architecture == The main idea of XLNet is to model language autoregressively like the GPT models, but allow for all possible permutations of a sentence. Concretely, consider the following sentence:My dog is cute.In standard autoregressive language modeling, the model would be tasked with predicting the probability of each word, conditioned on the previous words as its context: We factorize the joint probability of a sequence of words x 1 , … , x T {\displaystyle x_{1},\ldots ,x_{T}} using the chain rule: Pr ( x 1 , … , x T ) = Pr ( x 1 ) Pr ( x 2 | x 1 ) Pr ( x 3 | x 1 , x 2 ) … Pr ( x T | x 1 , … , x T − 1 ) . {\displaystyle \Pr(x_{1},\ldots ,x_{T})=\Pr(x_{1})\Pr(x_{2}|x_{1})\Pr(x_{3}|x_{1},x_{2})\ldots \Pr(x_{T}|x_{1},\ldots ,x_{T-1}).} For example, the sentence "My dog is cute" is factorized as: Pr ( My , dog , is , cute ) = Pr ( My ) Pr ( dog | My ) Pr ( is | My , dog ) Pr ( cute | My , dog , is ) . {\displaystyle \Pr({\text{My}},{\text{dog}},{\text{is}},{\text{cute}})=\Pr({\text{My}})\Pr({\text{dog}}|{\text{My}})\Pr({\text{is}}|{\text{My}},{\text{dog}})\Pr({\text{cute}}|{\text{My}},{\text{dog}},{\text{is}}).} Schematically, we can write it as → My → My dog → My dog is → My dog is cute . {\displaystyle {\texttt {}}{\texttt {}}{\texttt {}}{\texttt {}}\to {\text{My }}{\texttt {}}{\texttt {}}{\texttt {}}\to {\text{My dog }}{\texttt {}}{\texttt {}}\to {\text{My dog is }}{\texttt {}}\to {\text{My dog is cute}}.} However, for XLNet, the model is required to predict the words in a randomly generated order. Suppose we have sampled a randomly generated order 3241, then schematically, the model is required to perform the following prediction task: is dog is dog is cute → My dog is cute {\displaystyle {\texttt {}}{\texttt {}}{\texttt {}}{\texttt {}}\to {\texttt {}}{\texttt {}}{\text{is }}{\texttt {}}\to {\texttt {}}{\text{dog is }}{\texttt {}}\to {\texttt {}}{\text{dog is cute}}\to {\text{My dog is cute}}} By considering all permutations, XLNet is able to capture longer-range dependencies and better model the bidirectional context of words. === Two-Stream Self-Attention === To implement permutation language modeling, XLNet uses a two-stream self-attention mechanism. The two streams are: Content stream: This stream encodes the content of each word, as in standard causally masked self-attention. Query stream: This stream encodes the content of each word in the context of what has gone before. In more detail, it is a masked cross-attention mechanism, where the queries are from the query stream, and the key-value pairs are from the content stream. The content stream uses the causal mask M causal = [ 0 − ∞ − ∞ … − ∞ 0 0 − ∞ … − ∞ 0 0 0 … − ∞ ⋮ ⋮ ⋮ ⋱ ⋮ 0 0 0 … 0 ] {\displaystyle M_{\text{causal}}={\begin{bmatrix}0&-\infty &-\infty &\dots &-\infty \\0&0&-\infty &\dots &-\infty \\0&0&0&\dots &-\infty \\\vdots &\vdots &\vdots &\ddots &\vdots \\0&0&0&\dots &0\end{bmatrix}}} permuted by a random permutation matrix to P M causal P − 1 {\displaystyle PM_{\text{causal}}P^{-1}} . The query stream uses the cross-attention mask P ( M causal − ∞ I ) P − 1 {\displaystyle P(M_{\text{causal}}-\infty I)P^{-1}} , where the diagonal is subtracted away specifically to avoid the model "cheating" by looking at the content stream for what the current masked token is. Like the causal masking for GPT models, this two-stream masked architecture allows the model to train on all tokens in one forward pass. == Training == Two models were released: XLNet-Large, cased: 110M parameters, 24-layer, 1024-hidden, 16-heads XLNet-Base, cased: 340M parameters, 12-layer, 768-hidden, 12-heads. It was trained on a dataset that amounted to 32.89 billion tokens after tokenization with SentencePiece. The dataset was composed of BooksCorpus, and English Wikipedia, Giga5, ClueWeb 2012-B, and Common Crawl. It was trained on 512 TPU v3 chips, for 5.5 days. At the end of training, it still under-fitted the data, meaning it could have achieved lower loss with more training. It took 0.5 million steps with an Adam optimizer, linear learning rate decay, and a batch size of 8192.

    Read more →
  • Time-compressed speech

    Time-compressed speech

    Time-compressed speech refers to an audio recording of verbal text in which the text is presented in a much shorter time interval than it would through normally-paced real time speech. The basic purpose is to make recorded speech contain more words in a given time, yet still be understandable. For example: a paragraph that might normally be expected to take 20 seconds to read, might instead be presented in 15 seconds, which would represent a time-compression of 25% (5 seconds out of 20). The term "time-compressed speech" should not be confused with "speech compression", which controls the volume range of a sound, but does not alter its time envelope. == Methods == While some voice talents are capable of speaking at rates significantly in excess of general norms, the term "time-compressed speech" most usually refers to examples in which the time-reduction has been accomplished through some form of electronic processing of the recorded speech. In general, recorded speech can be electronically time-compressed by: increasing its speed (linear compression); removing silences (selective editing); a combination of the two (non-linear compression). The speed of a recording can be increased, which will cause the material to be presented at a faster rate (and hence in a shorter amount of time), but this has the undesirable side-effect of increasing the frequency of the whole passage, raising the pitch of the voices, which can reduce intelligibility. There are normally silences between words and sentences, and even small silences within certain words, both of which can be reduced or removed ("edited-out") which will also reduce the amount of time occupied by the full speech recording. However, this can also have the effect of removing verbal "punctuation" from the speech, causing words and sentences to run together unnaturally, again reducing intelligibility. Vowels are typically held a minimum of 20 milliseconds, over many cycles of the fundamental pitch. DSP systems can detect the beginning and end of each cycle and then skip over some fraction of those cycles, causing the material to be presented at a faster rate, without changing the pitch, maintaining a "normal" tone of voice. The current preferred method of time-compression is called "non-linear compression", which employs a combination of selectively removing silences; speeding up the speech to make the reduced silences sound normally-proportioned to the text; and finally applying various data algorithms to bring the speech back down to the proper pitch. This produces a more acceptable result than either of the two earlier techniques; however, if unrestrained, removing the silences and increasing the speed can make a selection of speech sound more insistent, possibly to the point of unpleasantness. == Applications == === Advertising === Time-compressed speech is frequently used in television and radio advertising. The advantage of time-compressed speech is that the same number of words can be compressed into a smaller amount of time, reducing advertising costs, and/or allowing more information to be included in a given radio or TV advertisement. It is usually most noticeable in the information-dense caveats and disclaimers presented (usually by legal requirement) at the end of commercials—the aural equivalent of the "fine print" in a printed contract. This practice, however, is not new: before electronic methods were developed, spokespeople who could talk extremely quickly and still be understood were widely used as voice talents for radio and TV advertisements, and especially for recording such disclaimers. === Education === Time-compressed speech has educational applications such as increasing the information density of trainings, and as a study aid. A number of studies have demonstrated that the average person is capable of relatively easily comprehending speech delivered at higher-than-normal rates, with the peak occurring at around 25% compression (that is, 25% faster than normal); this facility has been demonstrated in several languages. Conversational speech (in English) takes place at a rate of around 150 wpm (words per minute), but the average person is able to comprehend speech presented at rates of up to 200-250 wpm without undue difficulty. Blind and severely visually impaired subjects scored similar comprehension levels at even higher rates, up to 300-350 wpm. Blind people have been found to use time-compressed speech extensively, for example, when reviewing recorded lectures from high school and college classes, or professional trainings. Comprehension rates in older blind subjects have been found to be as good, or in some cases better than those found in younger sighted subjects. Other studies have determined that the ability to comprehend highly time-compressed speech tends to fall off with increased age, and is also reduced when the language of the time-compressed speech is not the listener's native language. Non-native speakers can, however, improve their comprehension level of time-compressed speech with multiday training. === Voice Mail === Voice mail systems have employed time-compressed speech since as far back as the 1970s. In this application, the technology enables the rapid review of messages in high-traffic systems, by a relatively small number of people. === Streaming Multimedia === Time-compressed speech has been explored as one of a variety of interrelated factors which may be manipulated to increase the efficiency of streaming multimedia presentations, by significantly reducing the latency times involved in the transfer of large digitally encoded media files.

    Read more →
  • Productivity software

    Productivity software

    Productivity software (also called personal productivity software or office productivity software) is application software used for producing information (such as documents, presentations, worksheets, databases, charts, graphs, digital paintings, electronic music and digital video). Its names arose from it increasing productivity, especially of individual office workers, from typists to knowledge workers, although its scope is now wider than that. Office suites, which brought word processing, spreadsheet, and relational database programs to the desktop in the 1980s, are the core example of productivity software. They revolutionized the office with the magnitude of the productivity increase they brought as compared with the pre-1980s office environments of typewriters, paper filing, and handwritten lists and ledgers. In the United States, as of 2015, some 78% of "middle-skill" occupations (those that call for more than a high school diploma but less than a bachelor's degree) required the use of productivity software. == Details == Productivity software traditionally runs directly on a computer. For example, Plus/4 model of computer contains in ROM for applications of productivity software. Productivity software is one of the reasons people use personal computers. == Office suite == An office suite is a bundle of productivity software (a software suite) intended to be used by office workers. The components are generally distributed together, have a consistent user interface and usually can interact with each other, sometimes in ways that the operating system would not normally allow. The earliest office suite for personal computers was MicroPro International's StarBurst in the early 1980s, comprising the WordStar word processor, the CalcStar spreadsheet and the DataStar database software. Other suites arose in the 1980s, and Microsoft Office came to dominate the market in the 1990s, a position it retains as of 2024. During the 1990s, office suite products gained popularity by offering bundles of applications that, when bought as part of a suite, effectively discounted the individual applications, with four or five applications being bundled for the price of two applications bought separately. When faced with such potential savings, customers could be "tempted by the suite, rather than the value of a particular product", and by 1994 more than 60 percent of the sales of Microsoft Word and around 70 percent of the sales of Microsoft Excel were as part of sales of Microsoft Office. Such considerations had an impact on vendors of individual applications, often smaller companies, raising concerns that office suites were "stifling innovation", and even established vendors such as Borland and WordPerfect were having to adapt to the suite phenomenon, Borland ultimately deciding to sell its Quattro Pro spreadsheet to WordPerfect as the latter sought to assemble its own suite product. The dominant suite vendors, Microsoft and Lotus, downplayed competition and innovation concerns, claiming that users were still able to exercise choice and that "user-driven development" was guiding the evolution of office suites. Another view was that component-based software would eventually emerge, focusing development on more specialised components used by productivity software, empowering "a plethora of third-party developers", and that a "mix and match" approach of such components would adapt to the user's way of working. === Office suite components === The base components of office suites are: Word processor Spreadsheet Presentation program Other components include: Database software Graphics suite (raster graphics editor, vector graphics editor, image viewer) Desktop publishing software Formula editor Diagramming software Email client Communication software Personal information manager Notetaking Groupware Project management software Table (information) Web log analysis software

    Read more →
  • Kai's Power Tools

    Kai's Power Tools

    Kai's Power Tools (KPT) are a set of API plugins created by the German computer scientist Kai Krause in 1992 that were designed for use with Adobe Photoshop and Corel Photo-Paint. Kai's Power Tools were sold to Corel in 2000 when MetaCreations was closed. There are various versions of Kai's Power Tools. KPT 3, 5, 6, and X sets are compilations of different filters. The program interface features a reward-based function in which a bonus function is revealed as the user moves towards more complex aspects of the tool. == Filters == The KPT Convolver is a mathematics based filter; the level of precision and varying effects can be achieved by using numerical values of colour, tint, hue, saturation, contrast, brightness, luminosity, and posterize. The KPT Projector takes the current image or selection and offers a number of interactive perspective warp effects. To a large extent, with its draggable distortion handles and its moving, scaling and rotating options, this simply duplicates Adobe Photoshop's Free Transform capabilities. What is completely different is the ability to rotate the bitmap image in 3D space and to tile the results if desired. It can also animate the distortions by dragging keyframes from the preview window into an animation palette. KPT 6 will then preview the animation and output it to various sizes in avi or mov format. This animation capability is even more useful with the KPT Turbulence filter. This is another distortion filter, but one that treats the image as if it was completely liquid. The preview panel shows the animation in real time. The KPT Goo filter is used to produce a single frame freeform liquid distortion. This filter is available both with KPT 6 and the standalone version. It works by effectively turning a bitmap image into a liquid that can be interactively smeared, smudged, twirled, and pinched with the range of tools on offer. The obvious use is to distort photographic portraits into caricatures. KPT Materializer can create advanced surface textures based on bump maps that define troughs and peaks. It can use any external image for the basis of the bump map or alternatively the user can pick out the hue, saturation, luminance or red, green, or blue channel of the current image. It can then offset, scale and rotate the texture map, control its lighting, and even blend in a reflection map. The filter can be used for anything from providing an oil-painting feel to an entire image, to giving the illusion of depth to a selection. Also producing the impression of depth is the KPT Gel filter which uses various paint tools to synthesize photo-realistic 3D materials such as metals, liquids, or plastics. Gel painting is very different from traditional 2D painting as the brush strokes pool together when they touch and refract the underlying image. It can also manipulate 3D paint—once it has been added—by twirling, pinching, and carving it. The opposite is true of the Equalizer filter, which is used for applying variations on sharpening effects. The filter has three modes. The first mode, Equalizer, looks and works rather like the graphic equalizer on a stereo system, enabling adjustment of the level of pixel contrast within nine bands of different visual frequencies. The second mode, Contrast Sharpen, allows for increasing the contrast between light and dark areas in an image. The third mode, Bounded Sharpen, can sharpen an image without causing oversharpening, which can lead to halo effects. This feature is particularly useful when pulling out the detail in an image softened by resizing. KPT SceneBuilder is used for producing photorealistic 3D scenes by importing and rendering 3DS files. The main image window offers three tabs for editing in 2D and 3D mode and for setting up the object's final texture. Many users regard this filter as being the most impressive because it acts as a standalone 3D rendering tool and provides control over everything from transparency, reflection, refraction, bump mapping through to multiple light sources, and so on but without the ability to create or edit objects. The final filter, KPT SkyEffects, also has its roots in Metacreations' experience with 3D programs such as Bryce and RayDream. This filter is designed to simulate the interaction between the light from the sun or moon with no less than six atmospheric layers of haze, fog and cloud. The filter is typical of the KPT 6 collection as a whole: at times the interface is inspired and offers the ability to create beautiful reddening sunsets simply by interactively dragging the sun toward the horizon, producing realistic sunsets and moonscapes. == Other effects == Kai's Power Tools 6 features a lens flare effect for precisely managing the type of glow, halo, streaks, and reflection. The addition of a library of preset effects helps to overcome this by allowing the user to choose a standard effect and then interactively position the flare in the image preview. KPT 6 provides a new engine in the form of the KPT Reaction, which takes a reaction seed and turns it into a seamlessly tiling pattern based on a reaction diffusion process. It offers random noise, regular dots or reticulated voronoi patterns or a bitmap image itself as the seed. Corel has no plans for any updates.

    Read more →
  • Iterative reconstruction

    Iterative reconstruction

    Iterative reconstruction refers to iterative algorithms used to reconstruct 2D and 3D images in certain imaging techniques. For example, in computed tomography an image must be reconstructed from projections of an object. Here, iterative reconstruction techniques are usually a better, but computationally more expensive alternative to the common filtered back projection (FBP) method, which directly calculates the image in a single reconstruction step. In recent research works, scientists have shown that extremely fast computations and massive parallelism is possible for iterative reconstruction, which makes iterative reconstruction practical for commercialization. == Basic concepts == The reconstruction of an image from the acquired data is an inverse problem. Often, it is not possible to exactly solve the inverse problem directly. In this case, a direct algorithm has to approximate the solution, which might cause visible reconstruction artifacts in the image. Iterative algorithms approach the correct solution using multiple iteration steps, which allows to obtain a better reconstruction at the cost of a higher computation time. There are a large variety of algorithms, but each starts with an assumed image, computes projections from the image, compares the original projection data and updates the image based upon the difference between the calculated and the actual projections. === Algebraic reconstruction === The Algebraic Reconstruction Technique (ART) was the first iterative reconstruction technique used for computed tomography by Hounsfield. === Iterative Sparse Asymptotic Minimum Variance === The iterative sparse asymptotic minimum variance algorithm is an iterative, parameter-free superresolution tomographic reconstruction method inspired by compressed sensing, with applications in synthetic-aperture radar, computed tomography scan, and magnetic resonance imaging (MRI). === Statistical reconstruction === There are typically five components to statistical iterative image reconstruction algorithms, e.g. An object model that expresses the unknown continuous-space function f ( r ) {\displaystyle f(r)} that is to be reconstructed in terms of a finite series with unknown coefficients that must be estimated from the data. A system model that relates the unknown object to the "ideal" measurements that would be recorded in the absence of measurement noise. Often this is a linear model of the form A x + ϵ {\displaystyle \mathbf {A} x+\epsilon } , where ϵ {\displaystyle \epsilon } represents the noise. A statistical model that describes how the noisy measurements vary around their ideal values. Often Gaussian noise or Poisson statistics are assumed. Because Poisson statistics are closer to reality, it is more widely used. A cost function that is to be minimized to estimate the image coefficient vector. Often this cost function includes some form of regularization. Sometimes the regularization is based on Markov random fields. An algorithm, usually iterative, for minimizing the cost function, including some initial estimate of the image and some stopping criterion for terminating the iterations. === Learned Iterative Reconstruction === In learned iterative reconstruction, the updating algorithm is learned from training data using techniques from machine learning such as convolutional neural networks, while still incorporating the image formation model. This typically gives faster and higher quality reconstructions and has been applied to CT and MRI reconstruction. == Advantages == The advantages of the iterative approach include improved insensitivity to noise and capability of reconstructing an optimal image in the case of incomplete data. The method has been applied in emission tomography modalities like SPECT and PET, where there is significant attenuation along ray paths and noise statistics are relatively poor. Statistical, likelihood-based approaches: Statistical, likelihood-based iterative expectation-maximization algorithms are now the preferred method of reconstruction. Such algorithms compute estimates of the likely distribution of annihilation events that led to the measured data, based on statistical principle, often providing better noise profiles and resistance to the streak artifacts common with FBP. Since the density of radioactive tracer is a function in a function space, therefore of extremely high-dimensions, methods which regularize the maximum-likelihood solution turning it towards penalized or maximum a-posteriori methods can have significant advantages for low counts. Examples such as Ulf Grenander's Sieve estimator or Bayes penalty methods, or via I.J. Good's roughness method may yield superior performance to expectation-maximization-based methods which involve a Poisson likelihood function only. As another example, it is considered superior when one does not have a large set of projections available, when the projections are not distributed uniformly in angle, or when the projections are sparse or missing at certain orientations. These scenarios may occur in intraoperative CT, in cardiac CT, or when metal artifacts require the exclusion of some portions of the projection data. In Magnetic Resonance Imaging it can be used to reconstruct images from data acquired with multiple receive coils and with sampling patterns different from the conventional Cartesian grid and allows the use of improved regularization techniques (e.g. total variation) or an extended modeling of physical processes to improve the reconstruction. For example, with iterative algorithms it is possible to reconstruct images from data acquired in a very short time as required for real-time MRI (rt-MRI). In Cryo Electron Tomography, where the limited number of projections are acquired due to the hardware limitations and to avoid the biological specimen damage, it can be used along with compressive sensing techniques or regularization functions (e.g. Huber function) to improve the reconstruction for better interpretation. Here is an example that illustrates the benefits of iterative image reconstruction for cardiac MRI.

    Read more →
  • Multi-focus image fusion

    Multi-focus image fusion

    Multi-focus image fusion is a multiple image compression technique using input images with different focus depths to make one output image that preserves all information. == Overview == The main idea of image fusion is gathering important and the essential information from the input images into one single image which ideally has all of the information of the input images. The research history of image fusion spans over 30 years and many scientific papers. Image fusion generally has two aspects: image fusion methods and objective evaluation metrics. In visual sensor networks (VSN), sensors are cameras which record images and video sequences. In many applications of VSN, a camera can't give a perfect illustration including all details of the scene. This is because of the limited depth of focus of the optical lens of cameras. Therefore, just the object located in the focal length of camera is focused and clear, and other parts of the image are blurred. VSN captures images with different depths of focus using several cameras. Due to the large amount of data generated by cameras compared to other sensors such as pressure and temperature sensors and some limitations of bandwidth, energy consumption and processing time, it is essential to process the local input images to decrease the amount of transmitted data. == Multi-Focus image fusion in the spatial domain == Huang and Jing have reviewed and applied several focus measurements in the spatial domain for the multi-focus image fusion process, suitable for real-time applications. They mentioned some focus measurements including variance, energy of image gradient (EOG), Tenenbaum's algorithm (Tenengrad), energy of Laplacian (EOL), sum-modified-Laplacian (SML), and spatial frequency (SF). Their experiments showed that EOL gave better results than other methods like variance and spatial frequency. == Multi-Focus image fusion in multi-scale transform and DCT domain == Image fusion based on the multi-scale transform is the most commonly used and promising technique. Laplacian pyramid transform, gradient pyramid-based transform, morphological pyramid transform and the premier ones, discrete wavelet transform, shift-invariant wavelet transform (SIDWT), and discrete cosine harmonic wavelet transform (DCHWT) are some examples of image fusion methods based on multi-scale transform. These methods are complex and have some limitations e.g. processing time and energy consumption. For example, multi-focus image fusion methods based on DWT require a lot of convolution operations, so they take more time and energy to process. Therefore, most methods in multi-scale transform are not suitable for real-time applications. Moreover, these methods are not very successful along edges, due to the wavelet transform process missing the edges of the image. They create ringing artefacts in the output image and reduce its quality. Due to the aforementioned problems in the multi-scale transform methods, researchers are interested in multi-focus image fusion in the DCT domain. DCT-based methods are more efficient in terms of transmission and archiving images coded in Joint Photographic Experts Group (JPEG) standard to the upper node in the VSN agent. A JPEG system consists of a pair of an encoder and a decoder. In the encoder, images are divided into non-overlapping 8×8 blocks, and the DCT coefficients are calculated for each. Since the quantization of DCT coefficients is a lossy process, many of the small-valued DCT coefficients are quantized to zero, which corresponds to high frequencies. DCT-based image fusion algorithms work better when the multi-focus image fusion methods are applied in the compressed domain. In addition, in the spatial-based methods, the input images must be decoded and then transferred to the spatial domain. After implementation of the image fusion operations, the output fused images must again be encoded. DCT domain-based methods do not require complex and time-consuming consecutive decoding and encoding operations. Therefore, the image fusion methods based on DCT domain operate with much less energy and processing time. Recently, a lot of research has been carried out in the DCT domain. DCT+Variance, DCT+Corr_Eng, DCT+EOL, and DCT+VOL are some prominent examples of DCT based methods.

    Read more →
  • Spherical basis

    Spherical basis

    In pure and applied mathematics, particularly quantum mechanics and computer graphics and their applications, a spherical basis is the basis used to express spherical tensors. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. While spherical polar coordinates are one orthogonal coordinate system for expressing vectors and tensors using polar and azimuthal angles and radial distance, the spherical basis are constructed from the standard basis and use complex numbers. == In three dimensions == A vector A in 3D Euclidean space R3 can be expressed in the familiar Cartesian coordinate system in the standard basis ex, ey, ez, and coordinates Ax, Ay, Az: or any other coordinate system with associated basis set of vectors. From this extend the scalars to allow multiplication by complex numbers, so that we are now working in C 3 {\displaystyle \mathbb {C} ^{3}} rather than R 3 {\displaystyle \mathbb {R} ^{3}} . === Basis definition === In the spherical bases denoted e+, e−, e0, and associated coordinates with respect to this basis, denoted A+, A−, A0, the vector A is: where the spherical basis vectors can be defined in terms of the Cartesian basis using complex-valued coefficients in the xy plane: in which i {\displaystyle i} denotes the imaginary unit, and one normal to the plane in the z direction: e 0 = e z {\displaystyle \mathbf {e} _{0}=\mathbf {e} _{z}} The inverse relations are: === Commutator definition === While giving a basis in a 3-dimensional space is a valid definition for a spherical tensor, it only covers the case for when the rank k {\displaystyle k} is 1. For higher ranks, one may use either the commutator, or rotation definition of a spherical tensor. The commutator definition is given below, any operator T q ( k ) {\displaystyle T_{q}^{(k)}} that satisfies the following relations is a spherical tensor: [ J ± , T q ( k ) ] = ℏ ( k ∓ q ) ( k ± q + 1 ) T q ± 1 ( k ) {\displaystyle [J_{\pm },T_{q}^{(k)}]=\hbar {\sqrt {(k\mp q)(k\pm q+1)}}T_{q\pm 1}^{(k)}} [ J z , T q ( k ) ] = ℏ q T q ( k ) {\displaystyle [J_{z},T_{q}^{(k)}]=\hbar qT_{q}^{(k)}} === Rotation definition === Analogously to how the spherical harmonics transform under a rotation, a general spherical tensor transforms as follows, when the states transform under the unitary Wigner D-matrix D ( R ) {\displaystyle {\mathcal {D}}(R)} , where R is a (3×3 rotation) group element in SO(3). That is, these matrices represent the rotation group elements. With the help of its Lie algebra, one can show these two definitions are equivalent. D ( R ) T q ( k ) D † ( R ) = ∑ q ′ = − k k T q ′ ( k ) D q ′ q ( k ) {\displaystyle {\mathcal {D}}(R)T_{q}^{(k)}{\mathcal {D}}^{\dagger }(R)=\sum _{q'=-k}^{k}T_{q'}^{(k)}{\mathcal {D}}_{q'q}^{(k)}} === Coordinate vectors === For the spherical basis, the coordinates are complex-valued numbers A+, A0, A−, and can be found by substitution of (3B) into (1), or directly calculated from the inner product ⟨, ⟩ (5): A 0 = ⟨ e 0 , A ⟩ = ⟨ e z , A ⟩ = A z {\displaystyle A_{0}=\left\langle \mathbf {e} _{0},\mathbf {A} \right\rangle =\left\langle \mathbf {e} _{z},\mathbf {A} \right\rangle =A_{z}} with inverse relations: In general, for two vectors with complex coefficients in the same real-valued orthonormal basis ei, with the property ei·ej = δij, the inner product is: where · is the usual dot product and the complex conjugate must be used to keep the magnitude (or "norm") of the vector positive definite. == Properties (three dimensions) == === Orthonormality === The spherical basis is an orthonormal basis, since the inner product ⟨, ⟩ (5) of every pair vanishes meaning the basis vectors are all mutually orthogonal: ⟨ e + , e − ⟩ = ⟨ e − , e 0 ⟩ = ⟨ e 0 , e + ⟩ = 0 {\displaystyle \left\langle \mathbf {e} _{+},\mathbf {e} _{-}\right\rangle =\left\langle \mathbf {e} _{-},\mathbf {e} _{0}\right\rangle =\left\langle \mathbf {e} _{0},\mathbf {e} _{+}\right\rangle =0} and each basis vector is a unit vector: ⟨ e + , e + ⟩ = ⟨ e − , e − ⟩ = ⟨ e 0 , e 0 ⟩ = 1 {\displaystyle \left\langle \mathbf {e} _{+},\mathbf {e} _{+}\right\rangle =\left\langle \mathbf {e} _{-},\mathbf {e} _{-}\right\rangle =\left\langle \mathbf {e} _{0},\mathbf {e} _{0}\right\rangle =1} hence the need for the normalizing factors of 1 / 2 {\displaystyle 1/\!{\sqrt {2}}} . === Change of basis matrix === The defining relations (3A) can be summarized by a transformation matrix U: ( e + e − e 0 ) = U ( e x e y e z ) , U = ( − 1 2 − i 2 0 + 1 2 − i 2 0 0 0 1 ) , {\displaystyle {\begin{pmatrix}\mathbf {e} _{+}\\\mathbf {e} _{-}\\\mathbf {e} _{0}\end{pmatrix}}=\mathbf {U} {\begin{pmatrix}\mathbf {e} _{x}\\\mathbf {e} _{y}\\\mathbf {e} _{z}\end{pmatrix}}\,,\quad \mathbf {U} ={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\+{\frac {1}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,,} with inverse: ( e x e y e z ) = U − 1 ( e + e − e 0 ) , U − 1 = ( − 1 2 + 1 2 0 + i 2 + i 2 0 0 0 1 ) . {\displaystyle {\begin{pmatrix}\mathbf {e} _{x}\\\mathbf {e} _{y}\\\mathbf {e} _{z}\end{pmatrix}}=\mathbf {U} ^{-1}{\begin{pmatrix}\mathbf {e} _{+}\\\mathbf {e} _{-}\\\mathbf {e} _{0}\end{pmatrix}}\,,\quad \mathbf {U} ^{-1}={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {1}{\sqrt {2}}}&0\\+{\frac {i}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,.} It can be seen that U is a unitary matrix, in other words its Hermitian conjugate U† (complex conjugate and matrix transpose) is also the inverse matrix U−1. For the coordinates: ( A + A − A 0 ) = U ∗ ( A x A y A z ) , U ∗ = ( − 1 2 + i 2 0 + 1 2 + i 2 0 0 0 1 ) , {\displaystyle {\begin{pmatrix}A_{+}\\A_{-}\\A_{0}\end{pmatrix}}=\mathbf {U} ^{\mathrm {} }{\begin{pmatrix}A_{x}\\A_{y}\\A_{z}\end{pmatrix}}\,,\quad \mathbf {U} ^{\mathrm {} }={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\+{\frac {1}{\sqrt {2}}}&+{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,,} and inverse: ( A x A y A z ) = ( U ∗ ) − 1 ( A + A − A 0 ) , ( U ∗ ) − 1 = ( − 1 2 + 1 2 0 − i 2 − i 2 0 0 0 1 ) . {\displaystyle {\begin{pmatrix}A_{x}\\A_{y}\\A_{z}\end{pmatrix}}=(\mathbf {U} ^{\mathrm {} })^{-1}{\begin{pmatrix}A_{+}\\A_{-}\\A_{0}\end{pmatrix}}\,,\quad (\mathbf {U} ^{\mathrm {} })^{-1}={\begin{pmatrix}-{\frac {1}{\sqrt {2}}}&+{\frac {1}{\sqrt {2}}}&0\\-{\frac {i}{\sqrt {2}}}&-{\frac {i}{\sqrt {2}}}&0\\0&0&1\end{pmatrix}}\,.} === Cross products === Taking cross products of the spherical basis vectors, we find an obvious relation: e q × e q = 0 {\displaystyle \mathbf {e} _{q}\times \mathbf {e} _{q}={\boldsymbol {0}}} where q is a placeholder for +, −, 0, and two less obvious relations: e ± × e ∓ = ± i e 0 {\displaystyle \mathbf {e} _{\pm }\times \mathbf {e} _{\mp }=\pm i\mathbf {e} _{0}} e ± × e 0 = ± i e ± {\displaystyle \mathbf {e} _{\pm }\times \mathbf {e} _{0}=\pm i\mathbf {e} _{\pm }} === Inner product in the spherical basis === The inner product between two vectors A and B in the spherical basis follows from the above definition of the inner product: ⟨ A , B ⟩ = A + B + ⋆ + A − B − ⋆ + A 0 B 0 ⋆ {\displaystyle \left\langle \mathbf {A} ,\mathbf {B} \right\rangle =A_{+}B_{+}^{\star }+A_{-}B_{-}^{\star }+A_{0}B_{0}^{\star }}

    Read more →