AI Data Center Zoning

AI Data Center Zoning — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Emergent algorithm

An emergent algorithm is an algorithm that exhibits emergent behavior. In essence an emergent algorithm implements a set of simple building block behaviors that when combined exhibit more complex behaviors. One example of this is the implementation of fuzzy motion controllers used to adapt robot movement in response to environmental obstacles. An emergent algorithm has the following characteristics: it achieves predictable global effects it does not require global visibility it does not assume any kind of centralized control it is self-stabilizing Other examples of emergent algorithms and models include cellular automata, artificial neural networks and swarm intelligence systems (ant colony optimization, bees algorithm, etc.).
Read more →
PressWise

PressWise was digital imposition software to quickly and easily impose most any variety of flat and folding layouts. It was acquired by the Aldus Prepress Group affectionately known in the print and publishing industry as the Aldus WiseGuys in August 1991 from Emulation Technologies Inc. of Cleveland, Ohio. It was further developed by the Aldus Press Group and launched as the first of many Aldus prepress products in 1993. It was subsequently owned by Adobe Systems, then Luminous Corporation (Seattle), then Imation, and finally ScenicSoft. PressWise was discontinued by ScenicSoft in 1999 ultimately. == History == In February 2009, the PressWise copyright was acquired by Aethos Technologies and a new print automation product was launched by its creator, Eric Wold of Santa Rosa, California. This new product has no relationship to the old imposition software of the same name. It's notable that Larry Letteney, former President of Creo Americas was a board member and shareholder of Aethos Technologies during its early phase. Datatech SmartSoft acquired exclusive distribution rights to the software in September 2009. In September 2010 Datatech SmartSoft completed the acquisition of the PressWise brand and product.
Read more →
Multiple satellite imaging

Multiple satellite imaging is the process of using multiple satellites to gather more information than a single satellite so that a better estimate of the desired source is possible. Something that cannot be resolved with one telescope might be visible with two or more telescopes. == Background == Interferometry is the process of combining waves in such a way that they constructively interfere. When two or more independent sources detect a signal at the same given frequency those signals can be combined and the result is better than each one individually. An overview of Astronomical interferometers and a History of astronomical interferometry can be referenced from their respective pages. The NASA Origins Program was created in the 1990s to ultimately search for the origin of the universe. The theory that the Origins Program is based on is: since light travels at a constant speed until it is absorbed by something; there is still light that was part of the first light ever created traveling about the universe and ultimately some of that light is coming in the general direction of Earth. So a satellite system capable of collecting light from the beginning of the universe would be able to tell us more about where we came from. There is also the constant search for life in other worlds. A satellite system using the interferometric technologies mentioned above would be able to have a much higher resolution than any of the current deep space imaging systems. == Future == NASA is currently focused on the Vision for Space Exploration and has reduced current funding for scientific unmanned space exploration in favor of human exploration. These budget cuts have slowed the multiple satellite imaging development and relevant scientific missions as Project Prometheus and Terrestrial Planet Finder have ended as well but research continues.
Read more →
Stairstep interpolation

In the field of image processing, stairstep interpolation is a widely employed method technique for interpolating pixels after enlarging an image. The fundamental concept is to interpolate multiple times, in small increments, using any interpolation algorithm that is better than nearest-neighbor interpolation such as; bilinear interpolation, and bicubic interpolation. A common scenario is to interpolate an image by using a bicubic interpolation which increases the image size by no more than 10% (110% of the original size) at a time until the desired size is reached. Fred Miranda, a developer, popularized this method by creating and developing several Photoshop plug-ins that incorporate this technique. == Example ==
Read more →
Microsoft Sway

Microsoft Sway is a presentation program and is part of the Microsoft 365 family of products. Sway was offered for general release by Microsoft in August 2015. It allows users who have a Microsoft account to combine text and media to create a presentable website. Users can pull content locally from the device in use, or from internet sources such as Bing, Facebook, OneDrive, and YouTube. Sway is distinguished from Microsoft FrontPage and Microsoft Expression Web – unrelated web design programs previously developed by Microsoft – in that Sway includes a method for hosting sites. Sway sites are stored on Microsoft's servers and are tied to the user's Microsoft account. They can be viewed and edited from any web browser through Office on the web. There is no offline editing or viewing function, but sites can be accessed using the app for Windows, and formerly iOS. == History == Sway was developed internally by Microsoft. In late 2014, the company announced an invite-only preview version of Sway and announced that Sway would not require an Office 365 subscription. An iOS app was released as a preview on 31 October 2014, but was discontinued on 17 December 2018 due to low usage. As of July 17, 2021, the Sway iOS app's discontinuance in 2018 was the last piece of news posted in the Sway tech blog. The Sway feature blog has not received an update since April 2017. The Microsoft Office Roadmap did not include any items related to Sway ever since. The iOS application is no longer under active development, and is not available for download. Since 2023, Microsoft has been consolidating the domains of its Microsoft 365 apps and services under cloud.microsoft. By 2025, the vast majority of services, including Sway, have already migrated to the cloud.microsoft domain. == Features == Users are able to add content from various sources into their Sway presentations. Some of the integrated services are owned by Microsoft, including OneNote, Bing, and other Sway sites. The program also provides native integration with other services, including YouTube, Facebook, Twitter, Mixcloud, and Infogram.
Read more →
Pixelmator Pro

Pixelmator Pro is a photo, video, and vector graphic editor developed by Apple for macOS and iPadOS as part of its Pixelmator and pro apps platforms and as a part of their Apple Creator Studio suite of applications. Pixelmator Pro relies heavily on technologies from Apple platforms such as Metal, CoreML, Core Image, AVFoundation, GCD, and SwiftUI. == Features == GPU accelerated with Metal 50+ standard image editing tools Layer-based image editor Video editing support Vector graphic support (including SVG support) AI-powered editing features such as background removal ML Super Resolution and Smart Replace Supports a variety of media formats (JPEG, RAW, Apple ProRAW, PSD, PNG, GIF, MP4, HEIF, etc) == Reception == Pixelmator Pro was generally well-received by reviewers who praised its deep use of machine learning, fully macOS-native design, and relatively affordable one-time purchase compared to subscription software such as Adobe Photoshop. Some reviewers criticized that some features are hard to find or hard to use. It was awarded Apple's Mac App of the Year in 2018. Pixelmator Pro does not have support for panorama stitching. == Acquisition by Apple == On November 1, 2024, the Pixelmator Team announced that they were to be acquired by Apple, subject to regulatory approval. Their site promises "There will be no material changes to the Pixelmator Pro, Pixelmator for iOS, and Photomator apps at this time." The acquisition was completed in February 2025. On January 13, 2026, Apple announced that a new version of Pixelmator Pro with AI features would be included in its new Apple Creator Studio subscription, the app would be brought to the iPad and the Mac app would be redesigned with Liquid Glass. == Version history == == Applescript == In 2020 Pixelmator Pro added the ability to leverage Apple's automation language 'AppleScript' to automate many tasks in version 1.8 (Lynx). This enabled simple and advanced automation activities such as image resize, crop, color adjustments, format change, moving layers around, and more advanced actions like removing background, Gaussian blur, text replacement, shadows, color replacement, etc.
Read more →
Comparison of vector graphics editors

A number of vector graphics editors exist for various platforms. Potential users of these editors will make comparisons based on factors such as the availability for the user's platform, the software license, the feature set, the merits of the user interface (UI) and the focus of the program. Some programs are more suitable for artistic work while others are better for technical drawings. Another important factor is the application's support of various vector and bitmap image formats for import and export. The tables in this article compare general and technical information for a number of vector graphics editors. See the article on each editor for further information. This article is neither all-inclusive nor necessarily up-to-date. == Some editors in detail == Adobe Fireworks (formerly Macromedia Fireworks) is a vector editor with bitmap editing capabilities with its main purpose being the creation of graphics for Web and screen. Fireworks supports RGB color scheme and has no CMYK support. This means it is mostly used for screen design. The native Fireworks file format is editable PNG (FWPNG or PNG). Adobe Fireworks has a competitive price, but its features can seem limited in comparison with other products. It is easier to learn than other products and can produce complex vector artwork. The Fireworks editable PNG file format is not supported by other Adobe products. Fireworks can manage the PSD and AI file formats which enables it to be integrated with other Adobe apps. Fireworks can also open FWPNG/PNG, PSD, AI, EPS, JPG, GIF, BMP, TIFF file formats, and save/export to FWPNG/PNG, PSD, AI (v.8), FXG (v.2.0), JPG, GIF, PDF, SWF and some others. Some support for exporting to SVG is available via a free Export extension. On May 6, 2013, Adobe announced that Fireworks would be phased out. Adobe Flash (formerly a Macromedia product) has straightforward vector editing tools that make it easier for designers and illustrators to use. The most important of these tools are vector lines and fills with bitmap-like selectable areas, simple modification of curves via the "selection" or the control points/handles through "direct selection" tools. Flash uses Actionscript for OOP, and has full XML functionality through E4X support. Adobe FreeHand (formerly Macromedia Freehand and Aldus Freehand) is mainly used by professional graphic designers. The functionality of FreeHand includes the flexibility of the application in the wide design environment, catering to the output needs of both traditional image reproduction methods and to contemporary print and digital media with its page-layout capabilities and text attribute controls. Specific functions of FreeHand include a superior image-tracing operation for vector editing, page layout features within multiple-page documents, and embedding custom print-settings (such as variable halftone-screen specifications within a single graphic, etc.) to each document independent of auxiliary printer-drivers. User-operation is considered to be more suited for designers with an artistic background compared to designers with a technical background. When being marketed, FreeHand lacked the promotional backing, development and PR support in comparison to other similar products. FreeHand was transferred to the classic print group after Macromedia was purchased by Adobe in 2005. On May 16, 2007, Adobe announced that no further updates to Freehand would be developed but continues to sell FreeHand MX as a Macromedia product. FreeHand continues to run on Mac OS X Snow Leopard (using an Adobe fix) and on Windows 7. For macOS, Affinity Designer is able to open version 10 & MX Freehand files. Adobe Illustrator is a commonly used editor because of Adobe's market dominance, but is more expensive than other similar products. It is primarily developed consistently in line with other Adobe products and is best integrated with Adobe's Creative Suite packages. The ai file format is proprietary, but some vector editors can open and save in that format. Illustrator imports over two dozen formats, including PSD, PDF and SVG, and exports AI, PDF, SVG, SVGZ, GIF, JPG, PNG, WBMP, and SWF. However, the user must be aware of unchecking the "Preserve Illustrator Editing Capabilities" option if generating interoperable SVG files is desired. Affinity Designer by Serif Europe (the successor to their previous product, DrawPlus) is non-subscription-based software that is often described as an alternative to Adobe Illustrator. The application can open Portable Document Format (PDF), Adobe Photoshop, and Adobe Illustrator files, as well as export to those formats and to the Scalable Vector Graphics (SVG) and Encapsulated PostScript (EPS) formats. It also supports import from some Adobe Freehand files (specifically versions 10 & MX). Apache OpenOffice Draw is the vector graphics editor of the Apache OpenOffice open source office suite. It supports many import and export file formats and is available for multiple desktop operating systems. Boxy SVG is a chromium-based vector graphics editor for creating illustrations, as well as logos, icons, and other elements of graphic design. It is primarily focused on editing drawings in the SVG file format. The program is available as both a web app and a desktop application for Windows, macOS, ChromeOS, and Linux-based operating systems. Collabora Online Draw is the vector graphics editor of the Collabora Online open source office suite. It supports many import and export file formats and is accessible via any modern web browser, it also supports desktop editing features, Collabora Office is available for desktop and mobile operating systems, it is the enterprise ready version of LibreOffice. ConceptDraw PRO is a business diagramming tool and vector graphics editor available for both Windows and macOS. It supports multi-page documents, and includes an integrated presentation mode. ConceptDraw PRO supports imports and exports several formats, including Microsoft Visio and Microsoft PowerPoint. Corel Designer (originally Micrografx Designer) is one of the earliest vector-based graphics editors for the Microsoft Windows platform. The product is mainly used for the creation of engineering drawings and is shipped with extensive libraries for the needs of engineers. It is also flexible enough for most vector graphics design applications. CorelDRAW is an editor used in the graphic design, sign making and fashion design industries. CorelDRAW is capable of limited interoperation by reading file formats from Adobe Illustrator. CorelDRAW has over 50 import and export filters, on-screen and dialog box editing and the ability to create multi-page documents. It can also generate TrueType and Type 1 fonts, although refined typographic control is better suited to a more specific application. Some other features of CorelDRAW include the creation and execution of VBA macros, viewing of colour separations in print preview mode and integrated professional imposing options. Dia is a free and open-source diagramming and vector graphics editor available for Windows, Linux and other Unix-based computer operating systems. Dia has a modular design and several shape packages for flowcharting, network diagrams and circuit diagrams. Its design was inspired by Microsoft Visio, although it uses a Single Document Interface similar to other GNOME software (such as GIMP). DrawPlus, first built for the Windows platform in 1993, has matured into a full featured vector graphics editor for home and professional users. Also available as a feature-limited free 'starter edition': DrawPlus SE. DrawPlus developers, Serif Europe, have now ceased its development in order to focus on its successor, Affinity Designer. Edraw Max is a cross-platform diagram software and vector graphics editor available for Windows, Mac and Linux. It supports kinds of diagram types. It supports imports and exports SVG, PDF, HTML, Multiple page TIFF, Microsoft Visio and Microsoft PowerPoint. Embroidermodder is a free machine embroidery software tool that supports a variety of formats and allows the user to add custom modifications to their embroidery designs. Fatpaint is a free, light-weight, browser-based graphic design application with built-in vector drawing tools. It can be accessed through any browser with Flash 9 installed. Its integration with Zazzle makes it particularly suitable for people who want to create graphics for custom printed products such as T-shirts, mugs, iPhone cases, flyers and other promotional products. Figma is a collaborative web-based online vector graphics editor, used primarily for UX design and prototyping. GIMP, which works mainly with raster images, offers a limited set of features to create and record SVG files. It can also load and handle SVG files created with other software like Inkscape. Inkscape is a free and open-source vector editor with the primary native format being SVG. Inkscape is available for Linux, Windows, Mac OS X, and
Read more →
Quack.com

Quack.com was an early voice portal company. The domain name later was used for Quack, an iPad search application from AOL. == History == It was founded in 1998 by Steven Woods, Jeromy Carriere and Alex Quilici as a Pittsburgh, Pennsylvania, USA, based voice portal infrastructure company named Quackware. Quack was the first company to try to create a voice portal: a consumer-based destination "site" in which consumers could not only access information by voice alone, but also complete transactions. Quackware launched a beta phone service in 1999 that allowed consumers to purchase books from sites such as Amazon and CDs from sites such as CDNow by answering a short set of questions. Quack followed with a set of information services from movie listings (inspired by, but expanding upon, Moviefone) to news, weather and stock quotes. This concept introduced a series of lookalike startups including Tellme Networks which raised more money than any Internet startup in history on a similar concept. Quack received its first venture funding from HDL Capital in 1999 and moved operations to Mountain View in Silicon Valley, California in 1999. A deal with Lycos was announced in May 2000. In September 2000 Quack was acquired for $200 million by America Online (AOL) and moved onto the Netscape campus with what was left of the Netscape team. Quack was attacked in the Canadian press for being representative of the Canadian "brain drain" to the US during the Internet bubble, focusing its recruiting efforts on the University of Waterloo, hiring more than 50 engineers from Waterloo in less than 10 months. Quack competitor Tellme Networks raised enormous funds in what became a highly competitive market in 2000, with the emergence of more than a dozen additional competitors in a 12-month period. Following its acquisition by America Online in an effort led by Ted Leonsis to bring Quack into AOL Interactive, the Quack voice service became AOLbyPhone as one of AOL's "web properties" along with MapQuest, Moviefone and others. Quack secured several patents that underlie the technical challenges of delivering interactive voice services. Constructing a voice portal required integrations and innovations not only in speech recognition and speech generation, but also in databases, application specification, constraint-based reasoning and artificial intelligence and computational linguistics. "Quack"'s name derived from the company goal of providing not only voice-based services, but more broadly "Quick Ubiquitous Access to Consumer Knowledge". The patents assigned to Quack.com include: System and method for voice access to Internet-based information, System and method for advertising with an Internet Voice Portal and recognizing the axiom that in interactive voice systems one must "know the set of possible answers to a question before asking it". System and method for determining if one web site has the same information as another web site. Quack.com was spoofed in The Simpsons in March 2002 in the episode "Blame It on Lisa" in which a "ComQuaak" sign is replaced by another equally crazy telecom company name. == 2010 onwards == In July 2010, quack.com became the focus of a new AOL iPad application, that was a web search experience. The product delivers web results and blends in picture, video and Twitter results. It enables you to preview the web results before you go to the site, search within each result, and flip through the results pages, making full use of the iPad's touch screen features. The iPad app was free via iTunes, but support discontinued in 2012.
Read more →
Right to explanation

In the regulation of algorithms, particularly artificial intelligence and its subfield of machine learning, a right to [an] explanation is a right to be given an explanation for an output of the algorithm. Such rights primarily refer to individual rights to be given an explanation for decisions that significantly affect an individual, particularly legally or financially. For example, a person who applies for a loan and is denied may ask for an explanation, which could be "Credit bureau X reports that you declared bankruptcy last year; this is the main factor in considering you too likely to default, and thus we will not give you the loan you applied for." Some such legal rights already exist, while the scope of a general "right to explanation" is a matter of ongoing debate. There have been arguments made that a "social right to explanation" is a crucial foundation for an information society, particularly as the institutions of that society will need to use digital technologies, artificial intelligence, machine learning. In other words, that the related automated decision making systems that use explainability would be more trustworthy and transparent. Without this right, which could be constituted both legally and through professional standards, the public will be left without much recourse to challenge the decisions of automated systems. == Examples == === Credit scoring in the United States === Under the Equal Credit Opportunity Act (Regulation B of the Code of Federal Regulations), Title 12, Chapter X, Part 1002, §1002.9, creditors are required to notify applicants who are denied credit with specific reasons for the detail. As detailed in §1002.9(b)(2): (2) Statement of specific reasons. The statement of reasons for adverse action required by paragraph (a)(2)(i) of this section must be specific and indicate the principal reason(s) for the adverse action. Statements that the adverse action was based on the creditor's internal standards or policies or that the applicant, joint applicant, or similar party failed to achieve a qualifying score on the creditor's credit scoring system are insufficient. The official interpretation of this section details what types of statements are acceptable. Creditors comply with this regulation by providing a list of reasons (generally at most 4, per interpretation of regulations), consisting of a numeric reason code (as identifier) and an associated explanation, identifying the main factors affecting a credit score. An example might be: 32: Balances on bankcard or revolving accounts too high compared to credit limits === European Union === The European Union General Data Protection Regulation (GDPR, enacted 2016, taking effect 2018) extends the automated decision-making rights in the 1995 Data Protection Directive to provide a legally disputed form of a right to an explanation, stated as such in Recital 71: "[the data subject should have] the right ... to obtain an explanation of the decision reached". In full: The data subject should have the right not to be subject to a decision, which may include a measure, evaluating personal aspects relating to him or her which is based solely on automated processing and which produces legal effects concerning him or her or similarly significantly affects him or her, such as automatic refusal of an online credit application or e-recruiting practices without any human intervention. ... In any case, such processing should be subject to suitable safeguards, which should include specific information to the data subject and the right to obtain human intervention, to express his or her point of view, to obtain an explanation of the decision reached after such assessment and to challenge the decision. However, the extent to which the regulations themselves provide a "right to explanation" is heavily debated. There are two main strands of criticism. There are significant legal issues with the right as found in Article 22 — as recitals are not binding, and the right to an explanation is not mentioned in the binding articles of the text, having been removed during the legislative process. In addition, there are significant restrictions on the types of automated decisions that are covered — which must be both "solely" based on automated processing, and have legal or similarly significant effects — which significantly limits the range of automated systems and decisions to which the right would apply. In particular, the right is unlikely to apply in many of the cases of algorithmic controversy that have been picked up in the media. The UK has also recently amended its implementation of Article 22. A second potential source of such a right has been pointed to in Article 15, the "right of access by the data subject". This restates a similar provision from the 1995 Data Protection Directive, allowing the data subject access to "meaningful information about the logic involved" in the same significant, solely automated decision-making, found in Article 22. Yet this too suffers from alleged challenges that relate to the timing of when this right can be drawn upon, as well as practical challenges that mean it may not be binding in many cases of public concern. Other EU legislative instruments contain explanation rights. The European Union's Artificial Intelligence Act provides in Article 86 a "[r]ight to explanation of individual decision-making" of certain high risk systems which produce significant, adverse effects to an individual's health, safety or fundamental rights. The right provides for "clear and meaningful explanations of the role of the AI system in the decision-making procedure and the main elements of the decision taken", although only applies to the extent other law does not provide such a right. The Digital Services Act in Article 27, and the Platform to Business Regulation in Article 5, both contain rights to have the main parameters of certain recommender systems to be made clear, although these provisions have been criticised as not matching the way that such systems work. The Platform Work Directive, which provides for regulation of automation in gig economy work as an extension of data protection law, further contains explanation provisions in Article 11, using the specific language of "explanation" in a binding article rather than a recital as is the case in the GDPR. Scholars note that remains uncertainty as to whether these provisions imply sufficiently tailored explanation in practice which will need to be resolved by courts. === France === In France the 2016 Loi pour une République numérique (Digital Republic Act or loi numérique) amends the country's administrative code to introduce a new provision for the explanation of decisions made by public sector bodies about individuals. It notes that where there is "a decision taken on the basis of an algorithmic treatment", the rules that define that treatment and its "principal characteristics" must be communicated to the citizen upon request, where there is not an exclusion (e.g. for national security or defence). These should include the following: the degree and the mode of contribution of the algorithmic processing to the decision- making; the data processed and its source; the treatment parameters, and where appropriate, their weighting, applied to the situation of the person concerned; the operations carried out by the treatment. Scholars have noted that this right, while limited to administrative decisions, goes beyond the GDPR right to explicitly apply to decision support rather than decisions "solely" based on automated processing, as well as provides a framework for explaining specific decisions. Indeed, the GDPR automated decision-making rights in the European Union, one of the places a "right to an explanation" has been sought within, find their origins in French law in the late 1970s. == Criticism == Some argue that a "right to explanation" is at best unnecessary, at worst harmful, and threatens to stifle innovation. Specific criticisms include: favoring human decisions over machine decisions, being redundant with existing laws, and focusing on process over outcome. Authors of study "Slave to the Algorithm? Why a 'Right to an Explanation' Is Probably Not the Remedy You Are Looking For" Lilian Edwards and Michael Veale argue that a right to explanation is not the solution to harms caused to stakeholders by algorithmic decisions. They also state that the right of explanation in the GDPR is narrowly defined, and is not compatible with how modern machine learning technologies are being developed. With these limitations, defining transparency within the context of algorithmic accountability remains a problem. For example, providing the source code of algorithms may not be sufficient and may create other problems in terms of privacy disclosures and the gaming of technical systems. To mitigate this issue, Edwards and Veale argue that an auditing system could be more effective, to allow auditors to loo
Read more →
Luminance HDR

Luminance HDR, formerly Qtpfsgui, is graphics software used for the creation and manipulation of high-dynamic-range images. Released under the terms of the GPL, it is available for Linux, Microsoft Windows, and Mac OS X (Intel only). Luminance HDR supports several High Dynamic Range (HDR) as well as Low Dynamic Range (LDR) file formats. == Functionality == Prerequisite of HDR photography are several narrow-range digital images with different exposures. Luminance HDR combines these images and calculates a high-contrast image. In order to view this image on a regular computer monitor, Luminance HDR can convert it into a displayable LDR image format using a variety of methods, such as tone mapping. Currently fifteen different tone mapping operators (algorithms) are available, each one with its tunable parameters. Different image processing techniques can be applied to the generated HDR images, such as resizing, cropping, rotating and a number of projective transformations. The software also provides batch processing functionality for creating HDR images and for tone mapping them in a non-interactive way. A module for copying Exif data among sets of images is also provided. For users who prefers the command line, a non-GUI, non-graphical interface is also available on all supported platforms. A common problem with HDR photography is that images need to be aligned exactly. If the subject is static, this can be achieved using a tripod or a stable surface on which the camera is placed. In the case of image data that does not align exactly, an automatic alignment can be performed using a tool provided by the Hugin project. If this automation doesn't provide the desired result, the user may improve it manually. == Supported formats == HDR images are images with a high dynamic range and, using Luminance HDR, they can be created as well as edited. The following HDR graphic formats are supported: OpenEXR Radiance HDR Tag Image File Format (TIFF) Format: 16 Bit, 32 Bit (Float) and LogLuv Raw PFS native Luminance HDR can create an HDR image from several LDR images and tonemap an HDR into an LDR. The following LDR formats are supported: JPG PNG Portable Pixmap (PPM) Portable Bitmap (PBM) TIFF (8 Bit)
Read more →
Automated restaurant

An automated restaurant or robotic restaurant is a restaurant that uses robots to do tasks such as delivering food and drink to the tables or cooking the food. Restaurant automation means the use of a restaurant management system to automate some or occasionally all of the major operations of a restaurant establishment. More recently, restaurants are opening that have completely or partially automated their services. These may include: taking orders, preparing food, serving, and billing. A few fully automated restaurants operate without any human intervention whatsoever. Robots are designed to help and sometimes replace human labour (such as waiters and chefs). The automation of restaurants may also allow for the option for greater customization of an order. == History == === Vending machines === In the late 19th and early 20th century a number of restaurants served food solely through vending machines. These restaurants were called automats or, in Japan, shokkenki. Customers ordered their food directly through the machines. === Sushi conveyors === Yoshiaki Shiraishi is a Japanese innovator who is known for the creation of conveyor belt sushi. He had the idea following difficulty staffing his small sushi restaurant and managing the restaurant on his own. He was inspired seeing beer bottles on a conveyor belt in an Asahi brewery. Yoshiaki's restaurants are an early example of restaurant automation; they used a conveyor belt to distribute dishes around the restaurant, eliminating the need for waiters. This example of automation dates back to the Japanese economic miracle; the first of Yoshiaki's conveyor belt sushi restaurants was opened under the name Mawaru Genroku Sushi in 1958, in Osaka. === Partial automation === As of 2011, across Europe, McDonald's had already begun implementing 7,000 touch screen kiosks that could handle cashiering duties. From 2015 to 2020, Zume had an automated pizza parlor. Later companies would try to produce smaller, less ambitious devices, with one robotics company producing a machine that could automate the slowest and most repetitive parts of assembling a pizza, such as spreading pizza sauce or placing slices of pepperoni, while leaving other customizations to employees. In 2020, a restaurant in the Netherlands began trialling the use of a robot to serve guests. In September 2021, Karakuri's 'Semblr' food service robot served personalised lunches for the 4,000 employees of grocery technology solutions provider ocado Group's head offices in Hatfield, UK. 2,700 different combinations of dishes were on offer. Customers could specify in grams what hot and cold items, proteins, sauces and fresh toppings they wanted. In 2021, Columbia University School of Engineering and Applied Science engineers developed a method of cooking 3D printed chicken with software-controlled robotic lasers. The “Digital Food” team exposed raw 3D printed chicken structures to both blue and infrared light. They then assessed the cooking depth, colour development, moisture retention and flavour differences of the laser-cooked 3D printed samples in comparison to stove-cooked meat. In June 2022 a California nonprofit chain of residential communities, Front Porch, experimented with robots in dining rooms at two locations to supplement wait staff by carrying plated food and drink to tables, and removing dishes. 65% of residents found the robots helpful, with 51% saying they let the staff spend more quality time with diners. 51% of staff were "excited" and 58% said they enabled more quality time with diners. The chain has 19 senior living communities (and 35 affordable housing communities), so it has potential to expand robots to more dining rooms. It is shifting to memory care, which may affect plans. == Rationales == === Advantages === Efficiency: Automated restaurants can significantly enhance operational efficiency by minimizing human error and reducing service time. With automated ordering, payment, and food preparation systems, customers can enjoy faster service and reduced waiting times. Cost savings: By reducing the need for human staff, automated restaurants can potentially lower labor costs. This can be particularly beneficial in areas with high labor expenses, as it allows for better resource allocation and cost management. Consistency: Automation ensures consistency in food quality and presentation. With precise portion control and standardized cooking methods, customers can expect the same quality and taste in their meals every time they visit. Enhanced customer experience: Self-service kiosks and automated systems provide customers with control and convenience. They can customize their orders, browse through menu options, and pay seamlessly, creating a more interactive and satisfying dining experience. === Disadvantages === Lack of personal touch: Automated restaurants may lack the personal interaction and warmth that traditional restaurants provide. Some customers prefer the human touch, personalized recommendations, and the social aspect of dining out. Technical issues: Reliance on technology means that technical glitches and malfunctions can occur, resulting in service disruptions or delays. Maintenance and technical support become critical in ensuring smooth operations. Limited menu complexity: The automation process may be better suited for standardized menu items rather than complex or customized dishes. The ability to cater to unique dietary preferences or accommodate special requests may be limited. Employment implications: Automated restaurants may result in job losses for traditional restaurant staff, potentially impacting the local workforce. It is important to consider the social and economic implications of adopting such technology. == Locations == Automated restaurants have been opening in many countries. Examples include: Nala Restaurant in Naperville, Illinois Fritz's Railroad Restaurant in Kansas City, Kansas Výtopna, a Railway Restaurant using model trains: franchise of various restaurants and coffeehouses in the Czech Republic Bagger's Restaurant in Nuremberg, Germany FuA-Men Restaurant, a ramen restaurant located in Nagoya, Japan Fōster Nutrition in Buenos Aires, Argentina Dalu Robot Restaurant in Jinan, China Haohai Robot Restaurant in Harbin, China Robot Kitchen Restaurant in Hong Kong Robo-Chef restaurant in Tehran, Iran, started in 2017, is the first robotic and "waiterless" restaurant of the Middle East. MIT graduates opened Spyce Kitchens in downtown Boston, Massachusetts, in 2018 Foodom, under Country Garden Holdings, opened January 12, 2020, in Guangzhou, China Robot Chacha, the first robot restaurant of India, is planning to open in the capital city of New Delhi. Kura Revolving Sushi Bar, with a number of locations in the United States, uses a tablets at tables for ordering, a conveyor belt to deliver food, and robots to deliver drinks and condiments. Chipotle Mexican Grill is beginning to deploy the Hyphen Makeline, which assembles up to 350 bowls and salads automatically per hour, and Chippy, an automatic tortilla chip fryer made by Miso Robotics. Serious Dumplings in Boca Raton, Florida
Read more →
Comparison of video editing software

This is a comparison of non-linear video editing software applications. See also a more complete list of video editing software. == General information == This table gives basic general information about the different editors: === Active === === Discontinued / Inactive === ==== Definition ==== professional: used for full length Hollywood movies; professional (small): mainly used for paid commercials, short films or podcasts/YouTube channels; prosumer: Mainly targeting private use, anything that can do more than just trimming a film; basic: trimming a film; == System requirements == This table lists the operating systems that different editors can run on without emulation, as well as other system requirements. Note that minimum system requirements are listed; some features (like High Definition support) may be unavailable with these specifications. "Unix" includes the similar Linux, BSD and Unix-like operating systems. == High definition/High resolution import == The table below indicates the ability of each program to import various High Definition video or High resolution video formats for editing. == Feature set == == Output options == Please note that recording to Blu-ray does not imply 1080@50p/60p . Most only support up to 1080i 25/30 frames per second recording. Also not all formats can be output.
Read more →
JustWatch

JustWatch is a website that provides information on the availability of films and TV shows on various streaming platforms such as Netflix, HBO Max, Disney+, Hulu, Peacock, Fandango at Home, Apple TV, and Amazon Prime Video, among others. It is also available as a mobile application and smart TV application. JustWatch provides a search engine that allows users to discover which digital platforms host a particular movie or TV series. As of November 2023, JustWatch is available to users in 139 countries. == Features == JustWatch functions as a search engine by aggregating information about the online availability of films and TV series from video-on-demand streaming services. It aggregates information from more than 100 video content libraries, as well providing information about video resolution quality, pricing, and purchase or rental options. The website includes various filters for searching, including genre, price, release date, rating, and popularity. Users are also able to create lists of shows and movies and to share these lists with other users. == History == JustWatch GmbH is an international database company that is privately held and headquartered in Berlin, Germany. The company specializes in the online availability of movies and TV series. In addition to its user-facing website, the company also has an advertising-focused arm, JustWatch Media, that works with corporate clients, using data about what people watch that it gleans from user behavior to help entertainment companies tailor their marketing strategies. Its clients include Universal Pictures, Paramount Pictures, and Sony Pictures, among others. Development of the website began in 2014, and it was launched in the U.S. and Germany in February 2015. In 2018, the company received funding to improve databases within the European Union. In December 2019, the company acquired a rival streaming aggregation service, GoWatchIt, from Plexus Entertainment. JustWatch also used the acquisition to open its first New York office. In 2019, JustWatch had over 30 million users across 38 countries. By 2020, the company's streaming aggregation service was available in over 45 countries. By November 2023, it was available in 139 countries, and had over 40 million monthly users. === Founding === JustWatch was co-founded in 2013 by David Croyé, Cristoph Hoyer, Kevin Hiller, Dominik Raute, Ingke Weimert, and Michael Wilken. In a company blog post from February 2017, Croyé described the group of co-founders as all having previously "worked in leading roles at successful international tech-startups in Berlin." Croyé, who currently holds the title of CEO at JustWatch GmbH, had previously worked as the chief marketing officer at kaufDA, a European location-based mobile coupon and promotion service, and the background of other co-founders included time at the adtech company Trademob and the streaming site MyVideo. Startup capital for the website initially came from the founders themselves. Croyé in particular was able to reinvest funds he had obtained from the sale of kaufDA to Axel Springer, a European media company, in March 2011. Since 2015, the company has had at least one additional round of seed funding, with investors including venture capital groups CG Partners and STS Ventures.
Read more →
Continuum robot

A continuum robot is a type of robot that is characterised by infinite degrees of freedom and number of joints. These characteristics allow continuum manipulators to adjust and modify their shape at any point along their length, granting them the possibility to work in confined spaces and complex environments where standard rigid-link robots cannot operate. In particular, we can define a continuum robot as an actuatable structure whose constitutive material forms curves with continuous tangent vectors. This is a fundamental definition that allows to distinguish between continuum robots and snake-arm robots or hyper-redundant manipulators: the presence of rigid links and joints allows them to only approximately perform curves with continuous tangent vectors. The design of continuum robots is bioinspired, as the intent is to resemble biological trunks, snakes and tentacles. Several concepts of continuum robots have been commercialised and can be found in many different domains of application, ranging from the medical field to undersea exploration. == Classification == Continuum robots can be categorised according to two main criteria: structure and actuation. === Structure === The main characteristic of the design of continuum robots is the presence of a continuously curving core structure, named backbone, whose shape can be actuated. The backbone must also be compliant, meaning that the backbone yields smoothly to external loads. According to the design principles chosen for the continuum manipulator, we can distinguish between: single-backbone: these continuum manipulators have one central elastic backbone through which actuation/transmission elements can run. multi-backbone: the structure of these continuum robots has two or more elastic elements (either rods or tubes) parallel to each other and constrained with one another in some way. concentric-tube: the backbone is made of concentric tubes that are free to rotate and translate between each other, depending on the actuation happening at the base of the robot. === Actuation === The actuation strategy of continuum manipulators can be distinguished between extrinsic or intrinsic actuation, depending on where the actuation happens: extrinsic actuation: the actuation happens outside the main structure of the robot and the forces are transmitted via mechanical transmission; among these techniques, there are cable/tendon driven actuators and multi-backbone strategies. intrinsic actuation: the actuation mechanism operates within the structure of the robot; these strategies include pneumatic or hydraulic chambers and the shape memory effect. The Actuated Flexible Manifold (AFM), introduced by Medina, Shapiro, and Shvalb (2016), models flexible grid-based robots that approximate smooth manifolds using discrete segments, each contributing one degree of freedom. Their work provides forward and inverse kinematics for planar and spatial configurations, bridging hyper-redundant and continuum robotics. == Advantages == The particular design of continuum robots offers several advantages with respect to rigid-link robots. First of all, as already said, continuum robots can more easily operate in environments that require a high level of dexterity, adaptability and flexibility. Moreover, the simplicity of their structure makes continuum robots more prone to miniaturisation. The rise of continuum robots has also paved the way for the development of soft continuum manipulators. These continuum manipulators are made of highly compliant materials that are flexible and can adapt and deform according to the surrounding environment. The "softness" of their material grants higher safety in human-robot interactions. == Disadvantages == The particular design of continuum robots also introduces many challenges. To properly and safely use continuum robots, it is crucial to have an accurate force and shape sensing system. Traditionally, this is done using cameras that are not suitable for some of the applications of continuum robots (e.g. minimally invasive surgery), or using electromagnetic sensors that are however disturbed by the presence of magnetic objects in the environment. To solve this issue, in the last years fiber-Bragg-grating sensors have been proposed as a possible alternative and have shown promising results. It is also necessary to notice that while the mechanical properties of rigid-link robots are fully understood, the comprehension of the behaviour and properties of continuum robots is still subject of study and debate. This poses new challenges in developing accurate models and control algorithms for this kind of robots. == Modelling == Creating an accurate model that can predict the shape of a continuum robot allows to properly control the robot's shape. There are three main approaches to model continuum robots: Cosserat rod theory: this approach is an exact solution to the static of a continuum robot, as it is not subject to any assumption. It solves a set of equilibrium equations between position, orientation, internal force and torque of the robot. This method requires to be solved numerically and it is therefore computationally expensive, due to its high complexity. Constant curvature: this technique assumes the backbone to be made of a series of mutually tangent sections that can be approximated as arcs with constant curvature. This approach is also known as piecewise constant-curvature. This assumption can be applied to the entire segment of the backbone or to its subsegments. This model has shown promising results, however it must be taken into account that the segment/subsegments of the backbone may not comply to the constant curvature assumption and therefore the model's behaviour may not entirely reflect the behaviour of the robot. Rigid-link model: this approach is based on the assumption that the continuum robot can be divided in small segments with rigid links. This is a strong assumption, since if the number of segments is too low, the model hardly behaves like the continuum robot, while increasing the number of segments means increasing the number of variables, and thus complexity. Despite this limitation, rigid-link modelling allows the use of the standard control techniques that are well known for rigid-link robots. It has been proven that this model can be coupled with shape and force sensing to mitigate its inaccuracy and can lead to promising results. == Sensing == To develop accurate control algorithms, it is necessary to complement the presented modelling techniques with real time shape sensing. The following options are currently available: Electromagnetic (EM) sensing: shape is reconstructed thanks to the mutual induction between a magnetic field generator and a magnetic field sensor. The most common external EM tracking system is the commercially available NDI Aurora: small sensors can be placed on the robot and their position is tracked in an external generated magnetic field. The validity of this method has been extensively assessed, however its performance is hindered by the limited workspace, whose dimension depends on the magnetic field. Another alternative is to embed the sensors internally in the continuum robot, combining magnetic sensors with Hall effect sensors: the magnetic field is measured at the level of the Hall effect sensors in order to estimate the deflection of the robot. However, it has been noticed that the higher the bending of the manipulator, the higher is the estimation error, due to crosstalk between sensors and magnets. Optical sensing: fiber Bragg grating sensors incorporated in an optical fiber can be embedded into the backbone of the continuum robot to estimate its shape; these sensors can only reflect a small range of the input light spectrum depending on their strain; therefore, by measuring the strain on each sensor it is possible to obtain the shape of the robot. This type of sensor is however expensive and is more prone to breaking in case of excessive strain, and this can happen in robots that can perform high deflections. == Control strategies == The control strategies can be distinguished in static and dynamic; the first one is based on the steady-state assumption, while the latter also considers the dynamic behaviour of the continuum robot. We can also differentiate between model-based controllers, that depend on a model of the robot, and model-free, that learn the robot's behaviour from data. Model-based static controllers: they rely on one of the modelling approaches presented above; once the model is defined, the kinematics must be inverted to obtain the desired actuator or configuration space variables. There are several ways to do this, like differential inverse kinematics, direct inversion or optimization. Model-free static controllers: these approaches learn directly, via machine learning techniques (e.g. regression methods and neural networks), the inverse kinematic or the direct kinematic representation of the con
Read more →
ACLU Mobile Justice

ACLU Mobile Justice was a video live streaming application developed for smartphones by various state chapters of the American Civil Liberties Union. It was intended to allow instant, secure video recording and transmission of interactions with, and perceived abuses by, law enforcement officers. Since its release by the ACLU of California for California residents, other versions of the app have been released for 16 other states and the District of Columbia by their ACLU chapters. It was discontinued in February 2025.
Read more →