AI Data Visualization Tools

AI Data Visualization Tools — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Circular thresholding

Circular thresholding is an algorithm for automatic image threshold selection in image processing. Most threshold selection algorithms assume that the values (e.g. intensities) lie on a linear scale. However, some quantities such as hue and orientation are a circular quantity, and therefore require circular thresholding algorithms. The example shows that the standard linear version of Otsu's method when applied to the hue channel of an image of blood cells fails to correctly segment the large white blood cells (leukocytes). In contrast the white blood cells are correctly segmented by the circular version of Otsu's method. == Methods == There are a relatively small number of circular image threshold selection algorithms. The following examples are all based on Otsu's method for linear histograms: (Tseng, Li and Tung 1995) smooth the circular histogram, and apply Otsu's method. The histogram is cyclically rotated so that the selected threshold is shifted to zero. Otsu's method and histogram rotation are applied iteratively until several heuristics involving class size, threshold location, and class variance are satisfied. (Wu et al. 2006) smooth the circular histogram until it contains only two peaks. The histogram is cyclically rotated so that the midpoint between the peaks is shifted to zero. Otsu's method and histogram rotation are applied iteratively until convergence of the threshold. (Lai and Rosin 2014) applied Otsu's method to the circular histogram. For the two class circular thresholding task they showed that, for a histogram with an even number of bins, the optimal solution for Otsu's criterion of within-class variance is obtained when the histogram is split into two halves. Therefore the optimal solution can be efficiently obtained in linear rather than quadratic time. == References and further reading == D.-C. Tseng, Y.-F. Li, and C.-T. Tung, Circular histogram thresholding for color image segmentation in Proc. Int. Conf. Document Anal. Recognit., 1995, pp. 673–676. J. Wu, P. Zeng, Y. Zhou, and C. Olivier, A novel color image segmentation method and its application to white blood cell image analysis in Proc. Int. Conf. Signal Process., vol. 2. 2006, pp. 16–20. Y.K. Lai, P.L. Rosin, Efficient Circular Thresholding, IEEE Trans. on Image Processing 23(3), 992–1001 (2014). doi:10.1109/TIP.2013.2297014
Read more →
Automated restaurant

An automated restaurant or robotic restaurant is a restaurant that uses robots to do tasks such as delivering food and drink to the tables or cooking the food. Restaurant automation means the use of a restaurant management system to automate some or occasionally all of the major operations of a restaurant establishment. More recently, restaurants are opening that have completely or partially automated their services. These may include: taking orders, preparing food, serving, and billing. A few fully automated restaurants operate without any human intervention whatsoever. Robots are designed to help and sometimes replace human labour (such as waiters and chefs). The automation of restaurants may also allow for the option for greater customization of an order. == History == === Vending machines === In the late 19th and early 20th century a number of restaurants served food solely through vending machines. These restaurants were called automats or, in Japan, shokkenki. Customers ordered their food directly through the machines. === Sushi conveyors === Yoshiaki Shiraishi is a Japanese innovator who is known for the creation of conveyor belt sushi. He had the idea following difficulty staffing his small sushi restaurant and managing the restaurant on his own. He was inspired seeing beer bottles on a conveyor belt in an Asahi brewery. Yoshiaki's restaurants are an early example of restaurant automation; they used a conveyor belt to distribute dishes around the restaurant, eliminating the need for waiters. This example of automation dates back to the Japanese economic miracle; the first of Yoshiaki's conveyor belt sushi restaurants was opened under the name Mawaru Genroku Sushi in 1958, in Osaka. === Partial automation === As of 2011, across Europe, McDonald's had already begun implementing 7,000 touch screen kiosks that could handle cashiering duties. From 2015 to 2020, Zume had an automated pizza parlor. Later companies would try to produce smaller, less ambitious devices, with one robotics company producing a machine that could automate the slowest and most repetitive parts of assembling a pizza, such as spreading pizza sauce or placing slices of pepperoni, while leaving other customizations to employees. In 2020, a restaurant in the Netherlands began trialling the use of a robot to serve guests. In September 2021, Karakuri's 'Semblr' food service robot served personalised lunches for the 4,000 employees of grocery technology solutions provider ocado Group's head offices in Hatfield, UK. 2,700 different combinations of dishes were on offer. Customers could specify in grams what hot and cold items, proteins, sauces and fresh toppings they wanted. In 2021, Columbia University School of Engineering and Applied Science engineers developed a method of cooking 3D printed chicken with software-controlled robotic lasers. The “Digital Food” team exposed raw 3D printed chicken structures to both blue and infrared light. They then assessed the cooking depth, colour development, moisture retention and flavour differences of the laser-cooked 3D printed samples in comparison to stove-cooked meat. In June 2022 a California nonprofit chain of residential communities, Front Porch, experimented with robots in dining rooms at two locations to supplement wait staff by carrying plated food and drink to tables, and removing dishes. 65% of residents found the robots helpful, with 51% saying they let the staff spend more quality time with diners. 51% of staff were "excited" and 58% said they enabled more quality time with diners. The chain has 19 senior living communities (and 35 affordable housing communities), so it has potential to expand robots to more dining rooms. It is shifting to memory care, which may affect plans. == Rationales == === Advantages === Efficiency: Automated restaurants can significantly enhance operational efficiency by minimizing human error and reducing service time. With automated ordering, payment, and food preparation systems, customers can enjoy faster service and reduced waiting times. Cost savings: By reducing the need for human staff, automated restaurants can potentially lower labor costs. This can be particularly beneficial in areas with high labor expenses, as it allows for better resource allocation and cost management. Consistency: Automation ensures consistency in food quality and presentation. With precise portion control and standardized cooking methods, customers can expect the same quality and taste in their meals every time they visit. Enhanced customer experience: Self-service kiosks and automated systems provide customers with control and convenience. They can customize their orders, browse through menu options, and pay seamlessly, creating a more interactive and satisfying dining experience. === Disadvantages === Lack of personal touch: Automated restaurants may lack the personal interaction and warmth that traditional restaurants provide. Some customers prefer the human touch, personalized recommendations, and the social aspect of dining out. Technical issues: Reliance on technology means that technical glitches and malfunctions can occur, resulting in service disruptions or delays. Maintenance and technical support become critical in ensuring smooth operations. Limited menu complexity: The automation process may be better suited for standardized menu items rather than complex or customized dishes. The ability to cater to unique dietary preferences or accommodate special requests may be limited. Employment implications: Automated restaurants may result in job losses for traditional restaurant staff, potentially impacting the local workforce. It is important to consider the social and economic implications of adopting such technology. == Locations == Automated restaurants have been opening in many countries. Examples include: Nala Restaurant in Naperville, Illinois Fritz's Railroad Restaurant in Kansas City, Kansas Výtopna, a Railway Restaurant using model trains: franchise of various restaurants and coffeehouses in the Czech Republic Bagger's Restaurant in Nuremberg, Germany FuA-Men Restaurant, a ramen restaurant located in Nagoya, Japan Fōster Nutrition in Buenos Aires, Argentina Dalu Robot Restaurant in Jinan, China Haohai Robot Restaurant in Harbin, China Robot Kitchen Restaurant in Hong Kong Robo-Chef restaurant in Tehran, Iran, started in 2017, is the first robotic and "waiterless" restaurant of the Middle East. MIT graduates opened Spyce Kitchens in downtown Boston, Massachusetts, in 2018 Foodom, under Country Garden Holdings, opened January 12, 2020, in Guangzhou, China Robot Chacha, the first robot restaurant of India, is planning to open in the capital city of New Delhi. Kura Revolving Sushi Bar, with a number of locations in the United States, uses a tablets at tables for ordering, a conveyor belt to deliver food, and robots to deliver drinks and condiments. Chipotle Mexican Grill is beginning to deploy the Hyphen Makeline, which assembles up to 350 bowls and salads automatically per hour, and Chippy, an automatic tortilla chip fryer made by Miso Robotics. Serious Dumplings in Boca Raton, Florida
Read more →
VueScan

VueScan is a computer program for image scanning, especially of photographs, including negatives. It supports optical character recognition (OCR) of text documents. The software can be downloaded and used free of charge, but adds a watermark on scans until a license is purchased. == Purpose == VueScan is intended to work with a large number of image scanners, excluding specialised professional scanners such as drum scanners, on many computer operating systems (OS), even if drivers for the scanner are not available for the OS. These scanners are supplied with device drivers and software to operate them, included in their price. A 2014 review considered that the reasons to purchase VueScan are to allow older scanners not supported by drivers for newer operating systems to be used in more up-to-date systems and for better scanning and processing of photographs (prints; also slides and negatives when supported by scanners) than is afforded by manufacturers' software. The review did not report any advantages to VueScan's processing of documents over other software. The reviewer considered VueScan comparable to SilverFast, a similar program, with support for some specific scanners better in one or the other. Vuescan supports more scanners, with a single purchase giving access to the full range of both film and flatbed scanners, and costs less. The VueScan program can be used with its own drivers or with drivers supplied by the scanner manufacturer, if supported by the operating system. VueScan drivers can also be used without the VueScan program by application software that supports scanning directly, such as Adobe Photoshop, again enabling the use of scanners without current manufacturers' drivers. In 2019 when Apple released macOS Catalina, they removed support for running 32-bit programs, including 32-bit drivers for scanning equipment. In response, Hamrick released VueScan 9.7, effectively saving thousands of scanners from being rendered obsolete. == Overview == VueScan enables the user to modify and fine-tune the scanning parameters. The program uses its own independent method to interface with scanner hardware, and can support many older scanners under computer operating systems for which drivers are not available, allowing old scanners to be used with newer platforms that do not otherwise support them. VueScan supports an increasing number of scanners and digital cameras; 2,400 on Windows, 2,100 on Mac OS X and 1,900 on Linux in 2018. VueScan is supplied as one downloadable file for each operating system, which supports the full range of scanners. Without the purchase of a license, the program runs in fully functional demonstration mode, identical to Professional mode, except that watermarks are superimposed on saved and printed images. Purchase of a license removes the watermark. A standard license allows updates for one year; a professional license allows unlimited updates and provides some additional features. VueScan supports optical character recognition (OCR), with English included, and 32 additional language packages available on its website. In September 2011, VueScan co-developer Ed Hamrick said that he was selling US$3 million per year of VueScan licenses.
Read more →
Dyme (company)

Dyme is a Dutch fintech start-up and subscription management app that allows users to cancel and renegotiate their recurring costs. In 2019, Dyme was the first independent Dutch company to receive a PSD2 licence from the Netherlands' central bank (DNB). == History == Dyme was founded in 2018 by Joran Iedema, David Knap, David Schogt and Wouter Florijn. The four had previously founded Cycleswap, a bicycle rental platform launched in 2015 and sold to the American platform Spinlister in 2016. The company gained notability in the Netherlands in 2020 when it appeared on Dutch television in Dragons Den, where Pieter Schoen made a €750,000 bid in an attempt to acquire 51.01% of the company. Dyme's Joran Iedema rejected the deal. == Recognition == Wired described Dyme as one of the "hottest start-ups in Europe" in 2021. As of 2021, the company reportedly had 350,000 registered users in the Netherlands and Great Britain.
Read more →
ParkMobile

ParkMobile is a mobile and web app providing parking payments in North America. Headquartered in Atlanta, Georgia, users can pay for on-street and off-street parking via app on their smartphone, web browser, or through calling a phone number. ParkMobile also offers parking reservations at stadiums or venues for concerts and sporting events, and in metro area garages. == History == ParkMobile was founded in the United States in 2008 by Albert Bogaard after originally starting in the Netherlands. The initial product served only zone (on-demand) parkers and payment for the parking spot was made via a phone call through an IVR system. In 2009, the ParkMobile app was released and the product launched in its first city, Grand Rapids, Michigan. Parking payments have since been accepted through a user's account by connecting a credit card. ParkMobile deployed in Washington, D.C., in 2011. As of 2023, ParkMobile now has over 50 million users. Parking reservations were introduced in 2017, allowing users to reserve parking in advance. In 2018, the company recapitalized with BMW as the shareholder. ParkMobile was then acquired by a joint venture with BMW and Daimler. Under this joint venture, ParkMobile parking payment functionality was available and integrated with BMW's navigation system in many of its 2018 models. EasyPark Group, the Swedish-based parking solutions company, acquired ParkMobile in 2021 and is the current owner rebranded as Arrive. In 2022, ParkMobile launched in the City of Boston with a city-wide parking app, ParkBoston, powered by ParkMobile. == Operations == === Products === ParkMobile's product offerings include zone (on-demand) parking payments, parking reservations, and a self-service reporting engine. Zone parking is the company's most widely used service. Users can use the app on their smartphone to pay parking fees. In 2017, ParkMobile began offering parking reservations. The service is provided in addition to on-demand parking options at stadiums and venues, as well as metro area parking garages. After launching the reservations feature, ParkMobile became the first mobile parking app provider in North America to have a consolidated app with both on-demand and reservations parking in one. ParkMobile 360, the company's self-service management and reporting platform for operators, launched in 2018. It is a web-based application for parking operators to manage parking inventory, adjust rates, create special parking events, and track analytics. In 2020, ParkMobile began offering an option to pay for parking with Google through integrating the ParkMobile experience with Google Maps In 2021, ParkMobile launched its web application, allowing users to complete their parking transactions directly from the mobile website without having to download the app or have an account. ParkMobile integrates with parking gate equipment so customers can use their app to pay for parking and scan to enter and exit the garage. === Locations === ParkMobile has over 50 million users across the United States, Canada, and Puerto Rico. The app is available in over 550 cities in the U.S. and over 150 colleges and universities. == Controversies == === Predatory towing and excessive ticketing === Since all paid parking sessions from a single supplier are able to be viewed together, the ease of viewing and enforcing parking violations has caused controversy. Parking Enforcement Services in Birmingham, Alabama, has been the subject complaints by users of the ParkMobile app who had paid for a parking session and still had their vehicle towed. Customers often use old or expired license plates and forget to update to the correct number, or mistype when entering their information into the ParkMobile app. The complaints are that the towing companies offer no lenience for these mistakes. They return to their car as the session expires, and find their car has been towed. Additionally, other municipality across the country have received complaints about excessive parking ticket issuing when inputting their information incorrectly in the ParkMobile app. In Stone Harbor, New Jersey, parking ticket violations increased by over 1,600% from the previous year since launching with the ParkMobile app. Police officers refute complaints of being "too strict" on writing tickets by admitting the ParkMobile system allows officers to "more seamlessly enforce" the city's parking laws. === Data security breach === In March 2021, ParkMobile suffered a cybersecurity incident "linked to a vulnerability in a third-party software," potentially exposing users' email addresses, phone numbers, and license plate numbers. ParkMobile responded by launching an investigation and notifying law enforcement authorities and affected municipalities. The investigation concluded "no sensitive data or Payment Card Information was affected" but ParkMobile confirmed that basic account information, such as license plate numbers and possibly email addresses or phone numbers, was accessed.
Read more →
Signal-to-noise ratio (imaging)

Signal-to-noise ratio (SNR) is used in imaging to characterize image quality. The sensitivity of a (digital or film) imaging system is typically described in the terms of the signal level that yields a threshold level of SNR. Industry standards define sensitivity in terms of the ISO film speed equivalent, using SNR thresholds (at average scene luminance) of 40:1 for "excellent" image quality and 10:1 for "acceptable" image quality. SNR is sometimes quantified in decibels (dB) of signal power relative to noise power, though in the imaging field the concept of "power" is sometimes taken to be the power of a voltage signal proportional to optical power; so a 20 dB SNR may mean either 10:1 or 100:1 optical power, depending on which definition is in use. == Definition of SNR == Traditionally, SNR is defined to be the ratio of the average signal value μ s i g {\displaystyle \mu _{\mathrm {sig} }} to the standard deviation of the signal σ s i g {\displaystyle \sigma _{\mathrm {sig} }} : S N R = μ s i g σ s i g {\displaystyle \mathrm {SNR} ={\frac {\mu _{\mathrm {sig} }}{\sigma _{\mathrm {sig} }}}} when the signal is an optical intensity, or as the square of this value if the signal and noise are viewed as amplitudes (field quantities).
Read more →
Firefox Lockwise

Firefox Lockwise (formerly Lockbox) is a deprecated password manager for the Firefox web browser, as well as the mobile operating systems iOS and Android. On desktop, Lockwise was simply part of Firefox, whereas on iOS and Android it was available as a standalone app. If Firefox Sync was activated (with a Firefox account), then Lockwise synced passwords between Firefox installations across devices. It also featured a built-in random password generator. The application and branding have since been "phased out." == History == Developed by Mozilla, it was originally named Firefox Lockbox in 2018. It was renamed "Lockwise" in May 2019. It was introduced for iOS on 10 July 2018 as part of the Test Pilot program. On 26 March 2019, it was released for Android. On desktop, Lockwise started out as a browser addon. Alphas were released between March and August 2019. Since Firefox version 70, Lockwise has been integrated into the browser (accessible at about:logins), having replaced a basic password manager presented in a popup window. Mozilla ended support for Firefox Lockwise on December 13, 2021. As of January 2026, Lockwise is still fully functional on Android to this day.
Read more →
Diia

Diia (Ukrainian: Дія [ˈd⁽ʲ⁾ijɐ] , lit. 'Action'; also an acronym for Держава і Я, Derzhava i Ya, IPA: [derˈʒɑwɐ i ˈjɑ], lit. 'State and Me') is a mobile app, a web portal and a brand of e-governance in Ukraine. Launched in 2020, the Diia app allows Ukrainian citizens to use digital documents on their smartphones instead of physical ones for identification and sharing purposes. The Diia portal allows access to over 130 government services. Eventually, the government plans to make all kinds of state-person interactions available through Diia. Diia was built in partnership with the United States and is poised to be shared with other countries. On the sidelines of the 2023 World Economic Forum in Davos, USAID Administrator Samantha Power said the US hopes to replicate the success of Diia in other countries. == History == Diia was first presented on September 27, 2019, by the Ministry of Digital Transformation of Ukraine as a brand of the State in a Smartphone project. Vice Prime Minister and Minister of Digital Transformation Mykhailo Fedorov announced the creation of a mobile app and a web portal that would unite in a single place all the services provided by the state to citizens and businesses. On February 6, 2020, the mobile app Diia was officially launched. During the presentation, Ukrainian President Volodymyr Zelensky said that 9 million Ukrainians now have access to their driver's license and car registration documents on their phones, while Prime Minister Oleksiy Honcharuk called the implementation of the State in a Smartphone project a priority for the government. In April 2020, the Ukrainian government approved a resolution for experimental usage of digital ID-cards and passports which would be issued to all Ukrainians via the Diia. On October 5, 2020, during the Diia Summit, the government presented a first major update of the app and web portal branded "Diia 2.0". More types of documents were added to the app as well as the ability to share documents with others via a single tap on a push-message. The web portal in turn expanded the number of available services to 27, including the ability to register a private limited company in half an hour. President Zelensky who opened the summit, announced that in 2021 Ukraine will enter the "paper less" mode by prohibiting civil servants from demanding paper documents. By the end of 2020, the app had more than six million users, while the portal had 50 available services. In March 2021, the Ukrainian parliament adopted a bill equating digital identity documents with their physical analogues. Starting on August 23, Ukrainian citizens can use digital ID-cards and passports for all purposes while in Ukraine. According to Minister of Digital Transformation Mykhailo Fedorov, Ukraine will become the first country in the world where digital identity documents are considered legally equivalent to ordinary ones. In September 2024, Diia launched an online marriage registration service, which can be beneficial especially for military personnel who spend much time on the frontline separated from their partners. In October 2024, Diia's online marriage service appeared in Time's Inventions of the 2024 list. In the first month of its operations over 1.1 million Ukrainians tried to make proposals using the technology, and 435 couples got married. == Benefits and challenges == The first and most obvious benefit is the convenience of such a platform. Citizens can have many documents on their smartphones at once, without concern about losing or damaging them. Whenever needed, they can just open an app on their smartphones and show/check the document they need. The idea is that Diia will help cut the bureaucracy associated with public services, which in turn will help fight corruption and increase government savings. Fewer people are needed to be employed in the public sector and fewer human to human interactions are supposed to happen. With the start of the program, already 10% of government employees were reduced, which contributes to hundreds of millions of dollars in savings, but besides this, the initiative also improves the speed, efficiency, and transparency of government services. In addition, the digitalization of the government sector helps to develop the whole IT industry in the country, people become more digitally aware and educated, this affects other sectors as well, increasing the spread of digital infrastructure and expediting the speed of overall digitalization. The UN E-government Development Index, which assesses the capabilities of governments to integrate its functions electronically, such as the use of internet and mobile devices, ranked Ukraine 69th in 193 countries surveyed in 2020. Despite its low ranking in the e-government development index, Ukraine made a big jump on the e-participation index, which they ranked 43rd out of 193 countries from 0.66 in 2018 to 0.81 in 2020 (un.org, 2020), suggesting that the government and its citizens are adapting the IT-based government functions. The main goal of e-government according to Perez-Morote et.al. (2020) is to have accountability and transparency among the countries involved. But to do so, there are several challenges that a country should assess first prior to implementing e-government. In the research written by Heeks (2001), the author identified 2 main challenges that countries face in the development of e-government, first is the strategic challenge which involves the preparedness (e-readiness) of the entire government system for electronic transformation, and second challenge is the tactical challenge where the government must design (e-governance design) a system where it can be understood by every user, it's important that the information that needs to be communicated to the consumers is received clearly. For the first challenge (e-readiness), Ukraine had an internet penetration rate of 76% in 2020 and is expected to grow to 82%, it is important that consumers have the internet access for it to enable the consumers to utilize the service. Another factor is the readiness of its institutional infrastructure, which means that the government has its own organization which is solely focused on implementing the e-government project. In the case of Ukraine, the e-governance team is led by Oleksandr Ryzhenko, and the country's e-governance initiative is even further strengthened by ensuring that the data and legal infrastructure are already prepared. Ukraine has done this by modernizing their legislation that is more appropriate in the digital service, and the data exchange solution used by Ukraine is called Trembita. The human infrastructure is also being updated, as competent individuals must be the one doing the task, hence, EGOV4UKRAINE was launched, this aims to get IT developers for developing a system for administrative services. These efforts by the Ukrainian government did not go unnoticed, and they received an award from the e-Governance Academy as "partner of the year 2017". For the second challenge, which deals with the system design, the success of Ukraine can be seen on the latest data of UNDP, where it shows a high increase in the E-participation index. In 2018, Ukraine ranked 75th it ranked 46th in 2020 (un.org, 2020). Despite visible success, the implementation of the e-government was accompanied by problems. Data leakage became the main one. In May 2020, the data of 26 million driver's licenses appeared in the public domain on the Internet. The Ukrainian government said the Diia app was not linked to a data breach, but it is impossible to say for certain. Any storage of official documents in electronic format is associated with the risk of their leakage. In addition, the Diia application still has data protection issues, as the required protection system has not been implemented. This is also compounded by the country's weak data protection legal regime. In addition, since 2023, Ukrainians are able to register their cars with this app. Issued license plates are not using regional codes, but they are using special codes starting with DI or PD. == Diia City == In May 2020, the government presented Diia City headed by Oleksandr Borniakov, a large-scale project which would establish a virtual model of a free economic zone for representatives of the creative economy. It would provide for special digital residency with a particular taxation regime, intellectual property protection and simplified regulations. Diia City concurrently imposes certain constraints on contracts involving individual entrepreneurs (FOPs). It also offers the benefit of tax rebates. Diia City garners endorsement from the Ukrainian government, believing it will support the country's position in the IT market. As of July 30, 2023, the program had more than 600 residents, including companies like iGama, Avenga, SBRobotiks, and Intellectsoft.
Read more →
Client honeypot

Honeypots are security devices whose value lie in being probed and compromised. Traditional honeypots are servers (or devices that expose server services) that wait passively to be attacked. Client Honeypots are active security devices in search of malicious servers that attack clients. The client honeypot poses as a client and interacts with the server to examine whether an attack has occurred. Often the focus of client honeypots is on web browsers, but any client that interacts with servers can be part of a client honeypot (for example ftp, email, ssh, etc.). There are several terms that are used to describe client honeypots. Besides client honeypot, which is the generic classification, honeyclient is the other term that is generally used and accepted. However, there is a subtlety here, as "honeyclient" is actually a homograph that could also refer to the first known open source client honeypot implementation (see below), although this should be clear from the context. == Architecture == A client honeypot is composed of three components. The first component, a queuer, is responsible for creating a list of servers for the client to visit. This list can be created, for example, through crawling. The second component is the client itself, which is able to make a requests to servers identified by the queuer. After the interaction with the server has taken place, the third component, an analysis engine, is responsible for determining whether an attack has taken place on the client honeypot. In addition to these components, client honeypots are usually equipped with some sort of containment strategy to prevent successful attacks from spreading beyond the client honeypot. This is usually achieved through the use of firewalls and virtual machine sandboxes. Analogous to traditional server honeypots, client honeypots are mainly classified by their interaction level: high or low; which denotes the level of functional interaction the server can utilize on the client honeypot. In addition to this there are also newly hybrid approaches which denotes the usage of both high and low interaction detection techniques. == High interaction == High interaction client honeypots are fully functional systems comparable to real systems with real clients. As such, no functional limitations (besides the containment strategy) exist on high interaction client honeypots. Attacks on high interaction client honeypots are detected via inspection of the state of the system after a server has been interacted with. The detection of changes to the client honeypot may indicate the occurrence of an attack against that has exploited a vulnerability of the client. An example of such a change is the presence of a new or altered file. High interaction client honeypots are very effective at detecting unknown attacks on clients. However, the tradeoff for this accuracy is a performance hit from the amount of system state that has to be monitored to make an attack assessment. Also, this detection mechanism is prone to various forms of evasion by the exploit. For example, an attack could delay the exploit from immediately triggering (time bombs) or could trigger upon a particular set of conditions or actions (logic bombs). Since no immediate, detectable state change occurred, the client honeypot is likely to incorrectly classify the server as safe even though it did successfully perform its attack on the client. Finally, if the client honeypots are running in virtual machines, then an exploit may try to detect the presence of the virtual environment and cease from triggering or behave differently. === Capture-HPC === Capture [1] is a high interaction client honeypot developed by researchers at Victoria University of Wellington, NZ. Capture differs from existing client honeypots in various ways. First, it is designed to be fast. State changes are being detected using an event based model allowing to react to state changes as they occur. Second, Capture is designed to be scalable. A central Capture server is able to control numerous clients across a network. Third, Capture is supposed to be a framework that allows to utilize different clients. The initial version of Capture supports Internet Explorer, but the current version supports all major browsers (Internet Explorer, Firefox, Opera, Safari) as well as other HTTP aware client applications, such as office applications and media players. === HoneyClient === HoneyClient [2] is a web browser based (IE/FireFox) high interaction client honeypot designed by Kathy Wang in 2004 and subsequently developed at MITRE. It was the first open source client honeypot and is a mix of Perl, C++, and Ruby. HoneyClient is state-based and detects attacks on Windows clients by monitoring files, process events, and registry entries. It has integrated the Capture-HPC real-time integrity checker to perform this detection. HoneyClient also contains a crawler, so it can be seeded with a list of initial URLs from which to start and can then continue to traverse web sites in search of client-side malware. === HoneyMonkey (dead since 2010) === HoneyMonkey [3] is a web browser based (IE) high interaction client honeypot implemented by Microsoft in 2005. It is not available for download. HoneyMonkey is state based and detects attacks on clients by monitoring files, registry, and processes. A unique characteristic of HoneyMonkey is its layered approach to interacting with servers in order to identify zero-day exploits. HoneyMonkey initially crawls the web with a vulnerable configuration. Once an attack has been identified, the server is reexamined with a fully patched configuration. If the attack is still detected, one can conclude that the attack utilizes an exploit for which no patch has been publicly released yet and therefore is quite dangerous. === SHELIA (dead since 2009) === Shelia [4] is a high interaction client honeypot developed by Joan Robert Rocaspana at Vrije Universiteit Amsterdam. It integrates with an email reader and processes each email it receives (URLs & attachments). Depending on the type of URL or attachment received, it opens a different client application (e.g. browser, office application, etc.) It monitors whether executable instructions are executed in data area of memory (which would indicate a buffer overflow exploit has been triggered). With such an approach, SHELIA is not only able to detect exploits, but is able to actually ward off exploits from triggering. === UW Spycrawler === The Spycrawler [5] developed at the University of Washington is yet another browser based (Mozilla) high interaction client honeypot developed by Moshchuk et al. in 2005. This client honeypot is not available for download. The Spycrawler is state based and detects attacks on clients by monitoring files, processes, registry, and browser crashes. Spycrawlers detection mechanism is event based. Further, it increases the passage of time of the virtual machine the Spycrawler is operating in to overcome (or rather reduce the impact of) time bombs. === Web Exploit Finder === WEF [6] is an implementation of an automatic drive-by-download – detection in a virtualized environment, developed by Thomas Müller, Benjamin Mack and Mehmet Arziman, three students from the Hochschule der Medien (HdM), Stuttgart during the summer term in 2006. WEF can be used as an active HoneyNet with a complete virtualization architecture underneath for rollbacks of compromised virtualized machines. == Low interaction == Low interaction client honeypots differ from high interaction client honeypots in that they do not utilize an entire real system, but rather use lightweight or simulated clients to interact with the server. (in the browser world, they are similar to web crawlers). Responses from servers are examined directly to assess whether an attack has taken place. This could be done, for example, by examining the response for the presence of malicious strings. Low interaction client honeypots are easier to deploy and operate than high interaction client honeypots and also perform better. However, they are likely to have a lower detection rate since attacks have to be known to the client honeypot in order for it to detect them; new attacks are likely to go unnoticed. They also suffer from the problem of evasion by exploits, which may be exacerbated due to their simplicity, thus making it easier for an exploit to detect the presence of the client honeypot. === HoneyC === HoneyC [7] is a low interaction client honeypot developed at Victoria University of Wellington by Christian Seifert in 2006. HoneyC is a platform independent open source framework written in Ruby. It currently concentrates driving a web browser simulator to interact with servers. Malicious servers are detected by statically examining the web server's response for malicious strings through the usage of Snort signatures. === Monkey-Spider (dead since 2008) === Monkey-Spider [8] is a low-interaction client honeypot i
Read more →
Evolutionary robotics

Evolutionary robotics is an embodied approach to Artificial Intelligence (AI) in which robots are automatically designed using Darwinian principles of natural selection. The design of a robot, or a subsystem of a robot such as a neural controller, is optimized against a behavioral goal (e.g. run as fast as possible). Usually, designs are evaluated in simulations as fabricating thousands or millions of designs and testing them in the real world is prohibitively expensive in terms of time, money, and safety. An evolutionary robotics experiment starts with a population of randomly generated robot designs. The worst performing designs are discarded and replaced with mutations and/or combinations of the better designs. This evolutionary algorithm continues until a prespecified amount of time elapses or some target performance metric is surpassed. Evolutionary robotics methods are particularly useful for engineering machines that must operate in environments in which humans have limited intuition (nanoscale, space, etc.). Evolved simulated robots can also be used as scientific tools to generate new hypotheses in biology and cognitive science, and to test old hypothesis that require experiments that have proven difficult or impossible to carry out in reality. == History == In the early 1990s, two separate European groups demonstrated different approaches to the evolution of robot control systems. Dario Floreano and Francesco Mondada at EPFL evolved controllers for the Khepera robot. Adrian Thompson, Nick Jakobi, Dave Cliff, Inman Harvey, and Phil Husbands evolved controllers for a Gantry robot at the University of Sussex. However the body of these robots was presupposed before evolution. The first simulations of evolved robots were reported by Karl Sims and Jeffrey Ventrella of the MIT Media Lab, also in the early 1990s. However these so-called virtual creatures never left their simulated worlds. The first evolved robots to be built in reality were 3D-printed by Hod Lipson and Jordan Pollack at Brandeis University at the turn of the 21st century.
Read more →
Auto-defrost

Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.
Read more →
Couch to 5K

Couch to 5K, abbreviated C25K, is an exercise plan that gradually progresses from beginner running toward a 5 kilometre (3.1 mile) run over nine weeks. == Operations == The Couch to 5K running plan, also known as C25K, created by Josh Clark in 1996, was developed with the expectation of creating a plan for new runners to start running. The plan is aimed to have users work out for 20 to 30 minutes, three days a week. Within the program, users can be expected to perform different tasks such as intervals of running with period of short walks in between to help build endurance in the weeks up to the final goal of a 5K run. During the nine weeks leading up to the race, the runner will learn to set their own pace and where their strengths and weaknesses are within running. Often, the daily workouts start with a five-minute warm-up walk and works up to running five kilometres without a walking break within nine weeks. Users are not expected to have any experience in running and can be some of the first running that they ever do. The main goal is to turn that unexperienced runner into someone who can run a 5K. Clark started the website Kick and featured C25K on the site. In 2001, Kick merged with Cool Running, a New England–based running site. Clark later sold his stake in Cool Running and the Couch to 5K program. Cool Running was absorbed into Active.com, operated by Active Network, LLC. Active Network provides mobile apps for Couch to 5K, as well as 5K to 10K, a follow-up program. The NHS in the UK provides downloadable podcasts and a smartphone app (Android and iOS) for the plan. A mobile app, created by Zen Labs, has training plans that are based on the Couch to 5K running plan from CoolRunning.com. It is one of the highest-rated health and fitness apps available on Android and iOS. As of 2016, the C25K app has been used by over 5 million people.
Read more →
Gemini Enterprise Agent Platform

Gemini Enterprise Agent Platform (formerly known as Vertex AI) is a managed machine learning (ML) and artificial intelligence (AI) platform developed by Google Cloud. It provides a unified environment for building, training, deploying, and scaling ML models and generative AI applications. The platform integrates tools for the full ML lifecycle, including data preparation, model training, evaluation, deployment, and monitoring, under a single API and user interface. Vertex AI was announced at Google I/O and released as a generally available product on May 18, 2021. At launch, Google described Vertex AI as unifying its AutoML offerings with its prior Cloud AI Platform capabilities, and as adding operational features intended to help teams move models from experimentation into production use. On April 22, 2026, Google announced Gemini Enterprise Agent Platform as the replacement evolution of Vertex AI. == History == Google Cloud announced the general availability of Vertex AI on May 18, 2021, at the Google I/O developer conference. The platform was designed to consolidate Google Cloud's previously separate ML offerings, including AutoML and the legacy AI Platform, into a single system. At launch, Google claimed that Vertex AI required roughly 80% fewer lines of code to train a model compared to competing platforms. In June 2023, Google made generative AI support in Vertex AI generally available, giving developers access to foundation models including PaLM 2, Imagen, and Codey through the platform's Model Garden and the newly launched Generative AI Studio. At the time of this launch, Model Garden included over 60 models from Google and its partners. In August 2023, at the Google Cloud Next conference, Google announced further updates to Vertex AI, including the addition of third-party models such as Claude 2 from Anthropic and Llama 2 from Meta to the Model Garden, as well as new tools called Vertex AI Extensions for connecting models to APIs for real-time data retrieval. At the same event, Vertex AI Search and Conversation were made generally available, providing enterprise search and chatbot capabilities powered by foundation models. In April 2024, at Google Cloud Next, the company introduced Vertex AI Agent Builder, a no-code tool for creating AI-powered conversational agents built on top of Gemini large language models. This brought together the existing Vertex AI Search and Conversation products with new developer tools for building generative AI experiences. == Features == === Model training === Vertex AI supports both AutoML, which enables code-free model training on tabular, image, text, or video data, and custom training, which gives users full control over the ML framework, training code, and hyperparameter tuning. The platform provides serverless training as well as dedicated training clusters with GPU and TPU accelerators. Vertex AI Vizier handles automatic hyperparameter tuning, and Vertex AI Experiments allows comparison and tracking of training runs. === Model Garden === The Vertex AI Model Garden is a curated catalog of over 200 enterprise-ready models, including Google's own foundation models (such as Gemini, Imagen, and Veo), third-party models (such as Anthropic's Claude and Mistral AI models), and popular open-source models (such as Llama and Gemma). Models are accessible as fully managed model-as-a-service APIs. === Pipelines (workflow orchestration) === Vertex AI Pipelines provides managed orchestration of ML workflows and supports pipelines built with the Kubeflow Pipelines SDK, among other options described in Google Cloud documentation. === Vertex AI Studio === Vertex AI Studio provides tools for prompt design, testing, and model management, allowing developers to prototype and build generative AI applications using natural language, code, images, or video. === Agent Builder and Agent Engine === Vertex AI Agent Builder is a suite of products for building, deploying, and governing AI agents in production environments. It supports development with the open-source Agent Development Kit (ADK) and other frameworks. Vertex AI Agent Engine provides the underlying infrastructure for deploying and scaling agents, with support for enterprise security features including HIPAA compliance, customer-managed encryption keys (CMEK), and VPC Service Controls. === Generative AI tooling and model access === Google markets Vertex AI as providing access to Google foundation models (including the Gemini family) and developer tools such as Vertex AI Studio, along with a model catalog that includes Google and selected open source models (marketed as "Model Garden"). Google has also offered products within Vertex AI aimed at building generative search and conversational applications, including offerings named "Vertex AI Search" and "Vertex AI Conversation" as reported in 2023 coverage of platform updates. === MLOps tools === The platform includes a range of MLOps capabilities: Vertex AI Pipelines for orchestrating and automating ML workflows as reusable pipelines. Vertex AI Feature Store for serving, sharing, and reusing ML features across projects. Vertex AI Model Registry for storing, versioning, and managing trained models. Vertex AI Model Monitoring for detecting training-serving skew and inference drift in deployed models. Vertex Explainable AI for interpreting model predictions. Vertex AI Workbench for managed JupyterLab notebook environments integrated with Google Cloud Storage and BigQuery. == Industry recognition == Google was named a Leader for the fifth consecutive year in the 2024 Gartner Magic Quadrant for Cloud AI Developer Services, a recognition that encompasses Vertex AI and its related offerings. Google was also recognized as a Leader in the 2024 Gartner Magic Quadrant for Data Science and Machine Learning Platforms and was named a Leader in the Forrester Wave for AI/ML Platforms, Q3 2024. In October 2025, Google was also named a Leader in the 2025 IDC (International Data Corporation) MarketScape for Worldwide GenAI Life-Cycle Foundation Model Software. == Pricing == Vertex AI uses a pay-as-you-go pricing model, with costs determined by the specific services consumed, including model training, prediction serving, and data storage. For generative AI tasks, pricing is based on a per-token model, with rates varying depending on the specific model used and whether tokens are input or output. Google offers a free tier for new users, which includes limited custom training hours and online prediction usage, along with an introductory US$300 in Google Cloud credits valid for 90 days. == Adoption == In the year following its 2021 launch, Google reported that usage of Vertex AI and BigQuery had driven 2.5 times more machine learning predictions compared to the prior year, and that active customers of Vertex AI Workbench had grown 25-fold over a six-month period. Early enterprise adopters included Ford, Wayfair, and Seagate, among others. Wayfair reported that it was able to run large model training jobs 5 to 10 times faster using the platform.
Read more →
Reconstruction from projections

The problem of reconstructing a multidimensional signal from its projection is uniquely multidimensional, having no 1-D counterpart. It has applications that range from computer-aided tomography to geophysical signal processing. It is a problem which can be explored from several points of view—as a deconvolution problem, a modeling problem, an estimation problem, or an interpolation problem. == Motivation and applications == Many fields in science and engineering use reconstruction from projections, especially in imaging. It is widely applied geophysical tomography, medical imaging and industrial radiography. For example, in a CT scanner, the 3D structure of the patient’s body being scanned is measured with beams going through the tissue and hitting a detector, giving a flat projection of the body from that angle. Multiple projections are put together to get an image of the position and shape of structures inside in 3D. == Problem statement and basics == A projection is a linear mapping of an M {\displaystyle M} dimensional signal into an N {\displaystyle N} dimensional one, where N ≤ M {\displaystyle N\leq M} . And the objective of reconstruction is to restore the M {\displaystyle M} dimensional signal based on the N {\displaystyle N} dimensional signal. The following case is a 2-D signal projected into 1D signal. The signal in the original coordinate is denoted as d ( u , v ) {\displaystyle d(u,v)} . Now consider a collimated beam of radiation coming from the opposite orientation of v ^ {\displaystyle {\hat {v}}} , producing a projection along u ^ {\displaystyle {\hat {u}}} . v ^ {\displaystyle {\hat {v}}} and u ^ {\displaystyle {\hat {u}}} are normal to each other, and the angle between u {\displaystyle u} and u ^ {\displaystyle {\hat {u}}} is theta. The signal obtained along u ^ {\displaystyle {\hat {u}}} axis is defined to be p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . The relationship between the original coordinate and the rotated coordinate is given by [ u ^ v ^ ] = [ cos ⁡ θ sin ⁡ θ − sin ⁡ θ cos ⁡ θ ] [ u v ] {\displaystyle {\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}={\begin{bmatrix}\cos \theta &\sin \theta \\-\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}u\\v\end{bmatrix}}} or inversely, [ u v ] = [ cos ⁡ θ − sin ⁡ θ sin ⁡ θ cos ⁡ θ ] [ u ^ v ^ ] {\displaystyle {\begin{bmatrix}u\\v\end{bmatrix}}={\begin{bmatrix}\cos \theta &-\sin \theta \\\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}} Then we have p θ ( u ^ ) = ∫ − ∞ ∞ d ( u , v ) d v ^ = ∫ − ∞ ∞ d ( u ^ cos ⁡ ( θ ) − v ^ sin ⁡ ( θ ) , u ^ sin ⁡ ( θ ) + v ^ cos ⁡ ( θ ) ) d v ^ {\displaystyle p_{\theta }({\hat {u}})=\int _{-\infty }^{\infty }d(u,v)\,\mathrm {d} {\hat {v}}=\int _{-\infty }^{\infty }d({\hat {u}}\cos(\theta )-{\hat {v}}\sin(\theta ),{\hat {u}}\sin(\theta )+{\hat {v}}\cos(\theta ))\,\mathrm {d} {\hat {v}}} By varying theta, a large number of projections can be obtained. Given the projection-slice theorem, D ( Ω , θ ) {\displaystyle D(\Omega ,\theta )} ,the slice of the Fourier transform of d ( u , v ) {\displaystyle d(u,v)} at angle theta, is equivalent to P θ ( Ω ) {\displaystyle P_{\theta }(\Omega )} , the Fourier Transform of the projection p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . Therefore, the unknown d ( u , v ) {\displaystyle d(u,v)} can be obtained from its Fourier transform by means of the Fourier transform inversion integral d ( u , v ) = 1 4 π 2 ∫ − ∞ ∞ ∫ − ∞ ∞ D ( Ω 1 , Ω 2 ) e j Ω 1 u e j Ω 2 v d Ω 1 , Ω 2 {\displaystyle \mathrm {d} (u,v)={\frac {1}{4\pi ^{2}}}\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }D(\Omega _{1},\Omega _{2})e^{j\Omega _{1}u}e^{j\Omega _{2}v}\,\mathrm {d} \Omega _{1},\Omega _{2}} = 1 4 π 2 ∫ 0 ∞ ∫ − π π D ( Ω , θ ) e j Ω u cos ⁡ ( θ ) e j Ω v s i n θ | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\infty }\int _{-\pi }^{\pi }D(\Omega ,\theta )e^{j\Omega u\cos(\theta )}e^{j\Omega vsin\theta }{\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ − π π ∫ 0 ∞ P θ ( Ω ) e j Ω ( u cos ⁡ θ + v sin ⁡ θ ) | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{-\pi }^{\pi }\int _{0}^{\infty }P_{\theta }(\Omega )e^{j}\Omega (u\cos \theta +v\sin \theta ){\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ 0 π ( ∫ − ∞ ∞ P θ ( Ω ) | Ω | {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\pi }(\int _{-\infty }^{\infty }P_{\theta }(\Omega ){\begin{vmatrix}\Omega \end{vmatrix}}} e j Ω u ^ d Ω ) d θ {\displaystyle e^{j\Omega {\hat {u}}}\mathrm {d} \Omega )\mathrm {d} \theta } By taking the inverse Fourier Transform and assuming g ( u ^ ) = F − 1 ( | Ω | 2 ) {\displaystyle g({\hat {u}})={\mathcal {F}}^{-1}({{\begin{vmatrix}\Omega \end{vmatrix}}^{2}})} , we get d ( u , v ) = ∑ i △ θ i [ p θ ( u ^ ) ∗ g θ i ( u ^ ) ] {\displaystyle d(u,v)=\sum _{i}\vartriangle \theta _{i}[p_{\theta }({\hat {u}})g_{\theta i}({\hat {u}})]} == Approaches == In practice, there are a wide variety of methods that are utilized, most of which are reconstruct 3-D information (volume) from 2-D signals (image). Typically used methods are CT, MRI, PET and SPECT. And the filtered back projection based on the principles introduced above are commonly applied. === Computed Tomography (CT) === In CT, a volume is formed by stacking the axial slices. The software cuts the volume in a different plane (usually orthogonal). Commonly, slice data is generated using an X-ray source that rotates around the object. X-ray sensors are positioned on the opposite side of the circle from the X-ray source. === Magnetic resonance imaging (MRI) === In MRI, energy from an oscillating magnetic field is temporarily applied to the patient at the appropriate resonance frequency. The protons (hydrogen atoms) emit a radio frequency signal which is measured by a receiving coil. The radio signal can be made to encode position information by varying the main magnetic field using gradient coils. === Positron emission tomography (PET) === The system detects pairs of gamma rays emitted indirectly by a positron-emitting radionuclide (tracer), which is introduced into the body on a biologically active molecule. Three-dimensional images of tracer concentration within the body are then constructed by computer analysis. In modern PET-CT scanners, three dimensional imaging is often accomplished with the aid of a CT X-ray scan performed on the patient during the same session, in the same machine. === Single-photon emission computed tomography (SPECT) === SPECT imaging is performed by using a gamma camera to acquire multiple 2-D images (projections) from multiple angles. Multiple projections are used to yield a 3-D data set. This data set may then be manipulated to show thin slices along any chosen axis of the body. SPECT is similar to PET in its use of radioactive tracer material and detection of gamma rays, while the tracers used in SPECT emit gamma radiation that is measured more directly.
Read more →
Voice user interface

A voice user interface (VUI) enables spoken human interaction with computers, using speech recognition to understand spoken commands and answer questions, and typically text to speech to play a reply. A voice command device is a device controlled with a voice user interface. Voice user interfaces have been added to automobiles, home automation systems, computer operating systems, home appliances like washing machines and microwave ovens, and television remote controls. They are the primary way of interacting with virtual assistants on smartphones and smart speakers. Older automated attendants (which route phone calls to the correct extension) and interactive voice response systems (which conduct more complicated transactions over the phone) can respond to the pressing of keypad buttons via DTMF tones, but those with a full voice user interface allow callers to speak requests and responses without having to press any buttons. Newer voice command devices are speaker-independent, so they can respond to multiple voices, regardless of accent or dialectal influences. They are also capable of responding to several commands at once, separating vocal messages, and providing appropriate feedback, accurately imitating a natural conversation. == Overview == A VUI is the interface to any speech application. Only a short time ago, controlling a machine by simply talking to it was only possible in science fiction. Until recently, this area was considered to be artificial intelligence. However, advances in technologies like text-to-speech, speech-to-text, natural language processing, and cloud services contributed to the mass adoption of these types of interfaces. VUIs have become more commonplace, and people are taking advantage of the value that these hands-free, eyes-free interfaces provide in many situations. VUIs rely on the ability to process input reliably, inconsistent performance often leads to decreased user engagement and negative feedback. Designing a good VUI requires interdisciplinary talents of computer science, linguistics and human factors such as psychology. Even with advanced development tools, constructing an effective VUI requires understanding of both the tasks to be performed, as well as the target audience that will use the final system. The closer the VUI matches the user's mental model of the task, the easier it will be to use with little or no training, resulting in both higher efficiency and higher user satisfaction. A VUI designed for the general public should emphasize ease of use and provide a lot of help and guidance for first-time callers. In contrast, a VUI designed for a small group of power users (including field service workers), should focus more on productivity and less on help and guidance. Such applications should streamline the call flows, minimize prompts, eliminate unnecessary iterations and allow elaborate "mixed initiative dialogs", which enable callers to enter several pieces of information in a single utterance and in any order or combination. In short, speech applications have to be carefully crafted for the specific business process that is being automated. Not all business processes render themselves equally well for speech automation. In general, the more complex the inquiries and transactions are, the more challenging they will be to automate, and the more likely they will be to fail with the general public. In some scenarios, automation is simply not applicable, so live agent assistance is the only option. A legal advice hotline, for example, would be very difficult to automate. On the flip side, speech is perfect for handling quick and routine transactions, like changing the status of a work order, completing a time or expense entry, or transferring funds between accounts. == History == Early applications for VUI included voice-activated dialing of phones, either directly or through a (typically Bluetooth) headset or vehicle audio system. In 2007, a CNN business article reported that voice command was over a billion dollar industry and that companies like Google and Apple were trying to create speech recognition features. In the years since the article was published, the world has witnessed a variety of voice command devices. Additionally, Google has created a speech recognition engine called Pico TTS and Apple released Siri. Voice command devices are becoming more widely available, and innovative ways for using the human voice are always being created. For example, Business Week suggests that the future remote controller is going to be the human voice. Currently Xbox Live allows such features and Jobs hinted at such a feature on the new Apple TV. == Voice command software products on computing devices == Both Apple Mac and Windows PC provide built in speech recognition features for their latest operating systems. === Microsoft Windows === Two Microsoft operating systems, Windows 7 and Windows Vista, provide speech recognition capabilities. Microsoft integrated voice commands into their operating systems to provide a mechanism for people who want to limit their use of the mouse and keyboard, but still want to maintain or increase their overall productivity. ==== Windows Vista ==== With Windows Vista voice control, a user may dictate documents and emails in mainstream applications, start and switch between applications, control the operating system, format documents, save documents, edit files, efficiently correct errors, and fill out forms on the Web. The speech recognition software learns automatically every time a user uses it, and speech recognition is available in English (U.S.), English (U.K.), German (Germany), French (France), Spanish (Spain), Japanese, Chinese (Traditional), and Chinese (Simplified). In addition, the software comes with an interactive tutorial, which can be used to train both the user and the speech recognition engine. ==== Windows 7 ==== In addition to all the features provided in Windows Vista, Windows 7 provides a wizard for setting up the microphone and a tutorial on how to use the feature. ==== Mac OS X ==== All Mac OS X computers come pre-installed with the speech recognition software. The software is user-independent, and it allows for a user to, "navigate menus and enter keyboard shortcuts; speak checkbox names, radio button names, list items, and button names; and open, close, control, and switch among applications." However, the Apple website recommends a user buy a commercial product called Dictate. === Commercial products === If a user is not satisfied with the built in speech recognition software or a user does not have a built speech recognition software for their OS, then a user may experiment with a commercial product such as Braina Pro or DragonNaturallySpeaking for Windows PCs, and Dictate, the name of the same software for Mac OS. == Voice command mobile devices == Any mobile device running Android OS, Microsoft Windows Phone, iOS 9 or later, or Blackberry OS provides voice command capabilities. In addition to the built-in speech recognition software for each mobile phone's operating system, a user may download third party voice command applications from each operating system's application store: Apple App store, Google Play, Windows Phone Marketplace (initially Windows Marketplace for Mobile), or BlackBerry App World. === Android OS === Google has developed an open source operating system called Android, which allows a user to perform voice commands such as: send text messages, listen to music, get directions, call businesses, call contacts, send email, view a map, go to websites, write a note, and search Google. The speech recognition software is available for all devices since Android 2.2 "Froyo", but the settings must be set to English. Google allows for the user to change the language, and the user is prompted when he or she first uses the speech recognition feature if he or she would like their voice data to be attached to their Google account. If a user decides to opt into this service, it allows Google to train the software to the user's voice. Google introduced the Google Assistant with Android 7.0 "Nougat". It is much more advanced than the older version. Amazon.com has the Echo that uses Amazon's custom version of Android to provide a voice interface. === Microsoft Windows === Windows Phone is Microsoft's mobile device's operating system. On Windows Phone 7.5, the speech app is user independent and can be used to: call someone from your contact list, call any phone number, redial the last number, send a text message, call your voice mail, open an application, read appointments, query phone status, and search the web. In addition, speech can also be used during a phone call, and the following actions are possible during a phone call: press a number, turn the speaker phone on, or call someone, which puts the current call on hold. Windows 10 introduces Cortana, a voice control system that replaces the formerly used voice control on Windows
Read more →