AI Detection Remover

AI Detection Remover — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Law practice management software

  Law practice management software is software designed to manage the business operations of a law firm. This can include software that manages cases, client intake, court communications, electronic discovery, time tracking, trust accounting, and billing. == Features of law practice management software == Common features of practice management software include: Case management Time tracking Document assembly Contact management Calendaring Docket management Client portal Contract Management Court Case Status Tracker Trust accounting == Examples of law practice management software == Smokeball LEAP Legal Software PracticeEvolve Dye & Durham

  Read more →
• 

  Scale-invariant feature operator

  In the fields of computer vision and image analysis, the scale-invariant feature operator (or SFOP) is an algorithm to detect local features in images. The algorithm was published by Förstner et al. in 2009. == Algorithm == The scale-invariant feature operator (SFOP) is based on two theoretical concepts: spiral model feature operator Desired properties of keypoint detectors: Invariance and repeatability for object recognition Accuracy to support camera calibration Interpretability: Especially corners and circles, should be part of the detected keypoints (see figure). As few control parameters as possible with clear semantics Complementarity to known detectors scale-invariant corner/circle detector. == Theory == === Maximize the weight === Maximize the weight w {\displaystyle w} = 1/variance of a point p {\displaystyle p} w ( p , α , τ , σ ) = ( N ( σ ) − 2 ) λ m i n ( M ( p , α , τ , σ ) ) Ω ( p , α , τ , σ ) {\displaystyle w(\mathbf {p} ,\alpha ,\tau ,\sigma )=\left(N(\sigma )-2\right){\frac {\lambda _{min}(M(\mathbf {p} ,\alpha ,\tau ,\sigma ))}{\Omega (\mathbf {p} ,\alpha ,\tau ,\sigma )}}} comprising: 1. the image model Ω ( p , α , τ , σ ) = ∑ n = 1 N ( σ ) [ ( q n − p ) T R α ∇ T g ( q n ) ] 2 G σ ( q n − p ) = N ( σ ) t r { R α ∇ τ ∇ τ T R α T ∗ p p T G σ ( p ) } {\displaystyle {\begin{aligned}\Omega (\mathbf {p} ,\alpha ,\tau ,\sigma )&=\sum _{n=1}^{N(\sigma )}[(\mathbf {q} _{n}-\mathbf {p} )^{T}\mathbf {R} _{\alpha }\mathbf {\nabla } _{T}g(\mathbf {q} _{n})]^{2}G_{\sigma }(\mathbf {q} _{n}-\mathbf {p} )\\&=N(\sigma )\mathbf {tr} \left\{R_{\alpha }\mathbf {\nabla } _{\tau }\mathbf {\nabla } _{\tau }^{T}R_{\alpha }^{T}\mathbf {p} \mathbf {p} ^{T}G_{\sigma }(\mathbf {p} )\right\}\end{aligned}}} 2. the smaller eigenvalue of the structure tensor M ( p , α , τ , σ ) ⏟ structure tensor = G σ ( p ) ⏟ weighted summation ∗ ( R σ ∇ τ ∇ τ T R σ T ) ⏟ squared rotated gradients {\displaystyle \underbrace {M(\mathbf {p} ,\alpha ,\tau ,\sigma )} _{\text{structure tensor}}=\underbrace {G_{\sigma }(\mathbf {p} )} _{\text{weighted summation}}\underbrace {(R_{\sigma }\nabla _{\tau }\nabla _{\tau }^{T}R_{\sigma }^{T})} _{\text{squared rotated gradients}}} === Reduce the search space === Reduce the 5-dimensional search space by linking the differentiation scale τ {\displaystyle \tau } to the integration scale τ = σ / 3 {\displaystyle \tau =\sigma /3} solving for the optimal α ^ {\displaystyle {\hat {\alpha }}} using the model Ω ( α ) = a − b cos ⁡ ( 2 α − 2 α 0 ) {\displaystyle \Omega (\alpha )=a-b\cos(2\alpha -2\alpha _{0})} and determining the parameters from three angles, e. g. Ω ( 0 ∘ ) , Ω ( 60 ∘ ) , Ω ( 120 ∘ ) → a , b , α 0 → α ^ {\displaystyle \Omega (0^{\circ }),\Omega (60^{\circ }),\Omega (120^{\circ })\quad \rightarrow \quad a,b,\alpha _{0}\quad \rightarrow \quad {\hat {\alpha }}} pre-selection possible: α = 0 ∘ → junctions , α = 90 ∘ → circular features {\displaystyle \alpha =0^{\circ }\,\rightarrow \,{\mbox{junctions}},\quad \alpha =90^{\circ }\,\rightarrow \,{\mbox{circular features}}} === Filter potential keypoints === non-maxima suppression over scale, space and angle thresholding the isotropy λ 2 ( M ) {\displaystyle \lambda _{2(M)}} :eigenvalues characterize the shape of the keypoint, smallest eigenvalue has to be larger than threshold T λ {\displaystyle T_{\lambda }} derived from noise variance V ( n ) {\displaystyle V(n)} and significance level S {\displaystyle S} : T λ ( V ( n ) , τ , σ , S ) = N ( σ ) 16 π τ 4 V ( n ) χ 2 , S 2 {\displaystyle T_{\lambda }(V(n),\tau ,\sigma ,S)={\frac {N(\sigma )}{16\pi \tau ^{4}}}V(n)\chi _{2,S}^{2}} == Algorithm == == Results == === Interpretability of SFOP keypoints ===

  Read more →
• 

  Parity benchmark

  Parity problems are widely used as benchmark problems in genetic programming but inherited from the artificial neural network community. Parity is calculated by summing all the binary inputs and reporting if the sum is odd or even. This is considered difficult because: a very simple artificial neural network cannot solve it, and all inputs need to be considered and a change to any one of them changes the answer.

  Read more →
• 

  Linguamatics

  Linguamatics, headquartered in Cambridge, England, with offices in the United States and UK, is a provider of text mining systems through software licensing and services, primarily for pharmaceutical and healthcare applications. Founded in 2001, the company was purchased by IQVIA in January 2019. == Technology == The company develops enterprise search tools for the life sciences sector. The core natural language processing engine (I2E) uses a federated architecture to incorporate data from 3rd party resources. Initially developed to be used interactively through a graphic user interface, the core software also has an application programming interface that can be used to automate searches. LabKey, Penn Medicine, Atrius Health and Mercy all use Linguamatics software to extract electronic health record data into data warehouses. Linguamatics software is used by 17 of the top 20 global pharmaceutical companies, the US Food and Drug Administration, as well as healthcare providers. == Software community == The core software, "I2E", is used by a number of companies to either extend their own software or to publish their data. Copyright Clearance Center uses I2E to produce searchable indexes of material that would otherwise be unsearchable due to copyright. Thomson Reuters produces Cortellis Informatics Clinical Text Analytics, which depends on I2E to make clinical data accessible and searchable. Pipeline Pilot can integrate I2E as part of a workflow. ChemAxon can be used alongside I2E to allow named entity recognition of chemicals within unstructured data. Data sources include MEDLINE, ClinicalTrials.gov, FDA Drug Labels, PubMed Central, and Patent Abstracts.

  Read more →
• 

  Noisy text analytics

  Noisy text analytics is a process of information extraction whose goal is to automatically extract structured or semistructured information from noisy unstructured text data. While Text analytics is a growing and mature field that has great value because of the huge amounts of data being produced, processing of noisy text is gaining in importance because a lot of common applications produce noisy text data. Noisy unstructured text data is found in informal settings such as online chat, text messages, e-mails, message boards, newsgroups, blogs, wikis and web pages. Also, text produced by processing spontaneous speech using automatic speech recognition and printed or handwritten text using optical character recognition contains processing noise. Text produced under such circumstances is typically highly noisy containing spelling errors, abbreviations, non-standard words, false starts, repetitions, missing punctuations, missing letter case information, pause filling words such as “um” and “uh” and other texting and speech disfluencies. Such text can be seen in large amounts in contact centers, chat rooms, optical character recognition (OCR) of text documents, short message service (SMS) text, etc. Documents with historical language can also be considered noisy with respect to today's knowledge about the language. Such text contains important historical, religious, ancient medical knowledge that is useful. The nature of the noisy text produced in all these contexts warrants moving beyond traditional text analysis techniques. == Techniques for noisy text analysis == Missing punctuation and the use of non-standard words can often hinder standard natural language processing tools such as part-of-speech tagging and parsing. Techniques to both learn from the noisy data and then to be able to process the noisy data are only now being developed. == Possible source of noisy text == World Wide Web: Poorly written text is found in web pages, online chat, blogs, wikis, discussion forums, newsgroups. Most of these data are unstructured and the style of writing is very different from, say, well-written news articles. Analysis for the web data is important because they are sources for market buzz analysis, market review, trend estimation, etc. Also, because of the large amount of data, it is necessary to find efficient methods of information extraction, classification, automatic summarization and analysis of these data. Contact centers: This is a general term for help desks, information lines and customer service centers operating in domains ranging from computer sales and support to mobile phones to apparels. On an average a person in the developed world interacts at least once a week with a contact center agent. A typical contact center agent handles over a hundred calls per day. They operate in various modes such as voice, online chat and E-mail. The contact center industry produces gigabytes of data in the form of E-mails, chat logs, voice conversation transcriptions, customer feedback, etc. A bulk of the contact center data is voice conversations. Transcription of these using state of the art automatic speech recognition results in text with 30-40% word error rate. Further, even written modes of communication like online chat between customers and agents and even the interactions over email tend to be noisy. Analysis of contact center data is essential for customer relationship management, customer satisfaction analysis, call modeling, customer profiling, agent profiling, etc., and it requires sophisticated techniques to handle poorly written text. Printed Documents: Many libraries, government organizations and national defence organizations have vast repositories of hard copy documents. To retrieve and process the content from such documents, they need to be processed using Optical Character Recognition. In addition to printed text, these documents may also contain handwritten annotations. OCRed text can be highly noisy depending on the font size, quality of the print etc. It can range from 2-3% word error rates to as high as 50-60% word error rates. Handwritten annotations can be particularly hard to decipher, and error rates can be quite high in their presence. Short Messaging Service (SMS): Language usage over computer mediated discourses, like chats, emails and SMS texts, significantly differs from the standard form of the language. An urge towards shorter message length facilitating faster typing and the need for semantic clarity, shape the structure of this non-standard form known as the texting language.

  Read more →
• 

  Nearest neighbor search

  Nearest neighbor search (NNS), as a form of proximity search, is the optimization problem of finding the point in a given set that is closest (or most similar) to a given point. Closeness is typically expressed in terms of a dissimilarity function: the less similar the objects, the larger the function values. Formally, the nearest neighbor (NN) search problem is defined as follows: given a set S of points in a space M and a query point q ∈ M {\displaystyle q\in M} , find the closest point in S to q. Donald Knuth in volume 3 of The Art of Computer Programming (1973) called it the post-office problem, referring to an application of assigning to a residence the nearest post office. A direct generalization of this problem is a k-NN search, where we need to find the k closest points. Most commonly M is a metric space and dissimilarity is expressed as a distance metric, which is symmetric and satisfies the triangle inequality. Even more common, M is taken to be the d-dimensional vector space where dissimilarity is measured using the Euclidean distance, Manhattan distance or other distance metric. However, the dissimilarity function can be arbitrary. One example is asymmetric Bregman divergence, for which the triangle inequality does not hold. == Applications == The nearest neighbor search problem arises in numerous fields of application, including: Pattern recognition – in particular for optical character recognition Statistical classification – see k-nearest neighbor algorithm Computer vision – for point cloud registration Computational geometry – see Closest pair of points problem Cryptanalysis – for lattice problem Databases – e.g. content-based image retrieval Coding theory – see maximum likelihood decoding Semantic search Vector databases, where nearest-neighbor lookup over embeddings is used to retrieve semantically similar records Retrieval-augmented generation systems, where nearest-neighbor retrieval over embeddings is used to fetch candidate passages or documents before generation Data compression – see MPEG-2 standard Robotic sensing Recommendation systems, e.g. see Collaborative filtering Internet marketing – see contextual advertising and behavioral targeting DNA sequencing Spell checking – suggesting correct spelling Plagiarism detection Similarity scores for predicting career paths of professional athletes. Cluster analysis – assignment of a set of observations into subsets (called clusters) so that observations in the same cluster are similar in some sense, usually based on Euclidean distance Chemical similarity Sampling-based motion planning == Methods == Various solutions to the NNS problem have been proposed. The quality and usefulness of the algorithms are determined by the time complexity of queries as well as the space complexity of any search data structures that must be maintained. The informal observation usually referred to as the curse of dimensionality states that there is no general-purpose exact solution for NNS in high-dimensional Euclidean space using polynomial preprocessing and polylogarithmic search time. === Exact methods === ==== Linear search ==== The simplest solution to the NNS problem is to compute the distance from the query point to every other point in the database, keeping track of the "best so far". This algorithm, sometimes referred to as the naive approach, has a running time of O(dN), where N is the cardinality of S and d is the dimensionality of S. There are no search data structures to maintain, so the linear search has no space complexity beyond the storage of the database. Naive search can, on average, outperform space partitioning approaches on higher dimensional spaces. The absolute distance is not required for distance comparison, only the relative distance. In geometric coordinate systems the distance calculation can be sped up considerably by omitting the square root calculation from the distance calculation between two coordinates. The distance comparison will still yield identical results. ==== Space partitioning ==== Since the 1970s, the branch and bound methodology has been applied to the problem. In the case of Euclidean space, this approach encompasses spatial index or spatial access methods. Several space-partitioning methods have been developed for solving the NNS problem. Perhaps the simplest is the k-d tree, which iteratively bisects the search space into two regions containing half of the points of the parent region. Queries are performed via traversal of the tree from the root to a leaf by evaluating the query point at each split. Depending on the distance specified in the query, neighboring branches that might contain hits may also need to be evaluated. For constant dimension query time, average complexity is O(log N) in the case of randomly distributed points, worst case complexity is O(kN^(1-1/k)) Alternatively the R-tree data structure was designed to support nearest neighbor search in dynamic context, as it has efficient algorithms for insertions and deletions such as the R tree. R-trees can yield nearest neighbors not only for Euclidean distance, but can also be used with other distances. In the case of general metric space, the branch-and-bound approach is known as the metric tree approach. Particular examples include vp-tree and BK-tree methods. Using a set of points taken from a 3-dimensional space and put into a BSP tree, and given a query point taken from the same space, a possible solution to the problem of finding the nearest point-cloud point to the query point is given in the following description of an algorithm. (Strictly speaking, no such point may exist, because it may not be unique. But in practice, usually we only care about finding any one of the subset of all point-cloud points that exist at the shortest distance to a given query point.) The idea is, for each branching of the tree, guess that the closest point in the cloud resides in the half-space containing the query point. This may not be the case, but it is a good heuristic. After having recursively gone through all the trouble of solving the problem for the guessed half-space, now compare the distance returned by this result with the shortest distance from the query point to the partitioning plane. This latter distance is that between the query point and the closest possible point that could exist in the half-space not searched. If this distance is greater than that returned in the earlier result, then clearly there is no need to search the other half-space. If there is such a need, then you must go through the trouble of solving the problem for the other half space, and then compare its result to the former result, and then return the proper result. The performance of this algorithm is nearer to logarithmic time than linear time when the query point is near the cloud, because as the distance between the query point and the closest point-cloud point nears zero, the algorithm needs only perform a look-up using the query point as a key to get the correct result. === Approximation methods === An approximate nearest neighbor search algorithm is allowed to return points whose distance from the query is at most c {\displaystyle c} times the distance from the query to its nearest points. The appeal of this approach is that, in many cases, an approximate nearest neighbor is almost as good as the exact one. In particular, if the distance measure accurately captures the notion of user quality, then small differences in the distance should not matter. ==== Greedy search in proximity neighborhood graphs ==== Proximity graph methods (such as navigable small world graphs and HNSW) are considered the current state-of-the-art for the approximate nearest neighbors search. The methods are based on greedy traversing in proximity neighborhood graphs G ( V , E ) {\displaystyle G(V,E)} in which every point x i ∈ S {\displaystyle x_{i}\in S} is uniquely associated with vertex v i ∈ V {\displaystyle v_{i}\in V} . The search for the nearest neighbors to a query q in the set S takes the form of searching for the vertex in the graph G ( V , E ) {\displaystyle G(V,E)} . The basic algorithm – greedy search – works as follows: search starts from an enter-point vertex v i ∈ V {\displaystyle v_{i}\in V} by computing the distances from the query q to each vertex of its neighborhood { v j : ( v i , v j ) ∈ E } {\displaystyle \{v_{j}:(v_{i},v_{j})\in E\}} , and then finds a vertex with the minimal distance value. If the distance value between the query and the selected vertex is smaller than the one between the query and the current element, then the algorithm moves to the selected vertex, and it becomes new enter-point. The algorithm stops when it reaches a local minimum: a vertex whose neighborhood does not contain a vertex that is closer to the query than the vertex itself. The idea of proximity neighborhood graphs was exploited in multiple publications, including the seminal paper by Arya and Mount, in the VoroNet syst

  Read more →
• 

  Multiple discriminant analysis

  Multiple Discriminant Analysis (MDA) is a multivariate dimensionality reduction technique. It has been used to predict signals as diverse as neural memory traces and corporate failure. MDA is not directly used to perform classification. It merely supports classification by yielding a compressed signal amenable to classification. The method described in Duda et al. (2001) §3.8.3 projects the multivariate signal down to an M−1 dimensional space where M is the number of categories. MDA is useful because most classifiers are strongly affected by the curse of dimensionality. In other words, when signals are represented in very-high-dimensional spaces, the classifier's performance is catastrophically impaired by the overfitting problem. This problem is reduced by compressing the signal down to a lower-dimensional space as MDA does. MDA has been used to reveal neural codes.

  Read more →
• 

  Santa Fe Trail problem

  The Santa Fe Trail problem is a genetic programming exercise in which artificial ants search for food pellets according to a programmed set of instructions. The layout of food pellets in the Santa Fe Trail problem has become a standard for comparing different genetic programming algorithms and solutions. One method for programming and testing algorithms on the Santa Fe Trail problem is by using the NetLogo application. There is at least one case of a student creating a Lego robotic ant to solve the problem.

  Read more →
• 

  Vicuna LLM

  Vicuna LLM is an omnibus large language model used in AI research. Its methodology is to enable the public at large to contrast and compare the accuracy of LLMs "in the wild" (an example of citizen science) and to vote on their output; a question-and-answer chat format is used. At the beginning of each round two LLM chatbots from a diverse pool of nine are presented randomly and anonymously, their identities only being revealed upon voting on their answers. The user has the option of either replaying ("regenerating") a round, or beginning an entirely fresh one with new LLMs. (The user also has the option of choosing which LLMs to do battle.) Based on Llama 2, it is an open source project, and it itself has become the subject of academic research in the burgeoning field. A non-commercial, public demo of the Vicuna-13b model is available to access using LMSYS.

  Read more →
• 

  Linear discriminant analysis

  Linear discriminant analysis (LDA), normal discriminant analysis (NDA), canonical variates analysis (CVA), or discriminant function analysis is a generalization of Fisher's linear discriminant, a method used in statistics and other fields, to find a linear combination of features that characterizes or separates two or more classes of objects or events. The resulting combination may be used as a linear classifier, or, more commonly, for dimensionality reduction before later classification. LDA is closely related to analysis of variance (ANOVA) and regression analysis, which also attempt to express one dependent variable as a linear combination of other features or measurements. However, ANOVA uses categorical independent variables and a continuous dependent variable, whereas discriminant analysis has continuous independent variables and a categorical dependent variable (i.e. the class label). Logistic regression and probit regression are more similar to LDA than ANOVA is, as they also explain a categorical variable by the values of continuous independent variables. These other methods are preferable in applications where it is not reasonable to assume that the independent variables have a normal distribution, which is a fundamental assumption of the LDA method. LDA is also closely related to principal component analysis (PCA) and factor analysis in that they both look for linear combinations of variables which best explain the data. LDA explicitly attempts to model the difference between the classes of data. PCA, in contrast, does not take into account any difference in class, and factor analysis builds the feature combinations based on similarities rather than differences. Discriminant analysis is also different from factor analysis in that it is not an interdependence technique: a distinction between independent variables and dependent variables (also called criterion variables) must be made. LDA works when the measurements made on independent variables for each observation are continuous quantities. When dealing with categorical independent variables, the equivalent technique is discriminant correspondence analysis. Discriminant analysis is used when groups are known a priori (unlike in cluster analysis). Each case must have a score on one or more quantitative predictor measures, and a score on a group measure. In simple terms, discriminant function analysis is classification - the act of distributing things into groups, classes or categories of the same type. == History == The original dichotomous discriminant analysis was developed by Sir Ronald Fisher in 1936. It is different from an ANOVA or MANOVA, which is used to predict one (ANOVA) or multiple (MANOVA) continuous dependent variables by one or more independent categorical variables. Discriminant function analysis is useful in determining whether a set of variables is effective in predicting category membership. == LDA for two classes == Consider a set of observations x → {\displaystyle {\vec {x}}} (also called features, attributes, variables or measurements) for each sample of an object or event with known class y {\displaystyle y} . This set of samples is called the training set in a supervised learning context. The classification problem is then to find a good predictor for the class y {\displaystyle y} of any sample of the same distribution (not necessarily from the training set) given only an observation x → {\displaystyle {\vec {x}}} . LDA approaches the problem by assuming that the conditional probability density functions p ( x → | y = 0 ) {\displaystyle p({\vec {x}}|y=0)} and p ( x → | y = 1 ) {\displaystyle p({\vec {x}}|y=1)} are both the normal distribution with mean and covariance parameters ( μ → 0 , Σ 0 ) {\displaystyle \left({\vec {\mu }}_{0},\Sigma _{0}\right)} and ( μ → 1 , Σ 1 ) {\displaystyle \left({\vec {\mu }}_{1},\Sigma _{1}\right)} , respectively. Under this assumption, the Bayes-optimal solution is to predict points as being from the second class if the log of the likelihood ratios is bigger than some threshold T, so that: 1 2 ( x → − μ → 0 ) T Σ 0 − 1 ( x → − μ → 0 ) + 1 2 ln ⁡ | Σ 0 | − 1 2 ( x → − μ → 1 ) T Σ 1 − 1 ( x → − μ → 1 ) − 1 2 ln ⁡ | Σ 1 | > T {\displaystyle {\frac {1}{2}}({\vec {x}}-{\vec {\mu }}_{0})^{\mathrm {T} }\Sigma _{0}^{-1}({\vec {x}}-{\vec {\mu }}_{0})+{\frac {1}{2}}\ln |\Sigma _{0}|-{\frac {1}{2}}({\vec {x}}-{\vec {\mu }}_{1})^{\mathrm {T} }\Sigma _{1}^{-1}({\vec {x}}-{\vec {\mu }}_{1})-{\frac {1}{2}}\ln |\Sigma _{1}|\ >\ T} Without any further assumptions, the resulting classifier is referred to as quadratic discriminant analysis (QDA). LDA instead makes the additional simplifying homoscedasticity assumption (i.e. that the class covariances are identical, so Σ 0 = Σ 1 = Σ {\displaystyle \Sigma _{0}=\Sigma _{1}=\Sigma } ) and that the covariances have full rank. In this case, several terms cancel: x → T Σ 0 − 1 x → = x → T Σ 1 − 1 x → {\displaystyle {\vec {x}}^{\mathrm {T} }\Sigma _{0}^{-1}{\vec {x}}={\vec {x}}^{\mathrm {T} }\Sigma _{1}^{-1}{\vec {x}}} x → T Σ i − 1 μ → i = μ → i T Σ i − 1 x → {\displaystyle {\vec {x}}^{\mathrm {T} }{\Sigma _{i}}^{-1}{\vec {\mu }}_{i}={{\vec {\mu }}_{i}}^{\mathrm {T} }{\Sigma _{i}}^{-1}{\vec {x}}} because both sides are scalar and transpose to each other ( Σ i {\displaystyle \Sigma _{i}} is Hermitian) and the above decision criterion becomes a threshold on the dot product w → T x → > c {\displaystyle {\vec {w}}^{\mathrm {T} }{\vec {x}}>c} for some threshold constant c, where w → = Σ − 1 ( μ → 1 − μ → 0 ) {\displaystyle {\vec {w}}=\Sigma ^{-1}({\vec {\mu }}_{1}-{\vec {\mu }}_{0})} c = 1 2 w → T ( μ → 1 + μ → 0 ) {\displaystyle c={\frac {1}{2}}\,{\vec {w}}^{\mathrm {T} }({\vec {\mu }}_{1}+{\vec {\mu }}_{0})} This means that the criterion of an input x → {\displaystyle {\vec {x}}} being in a class y {\displaystyle y} is purely a function of this linear combination of the known observations. It is often useful to see this conclusion in geometrical terms: the criterion of an input x → {\displaystyle {\vec {x}}} being in a class y {\displaystyle y} is purely a function of projection of multidimensional-space point x → {\displaystyle {\vec {x}}} onto vector w → {\displaystyle {\vec {w}}} (thus, we only consider its direction). In other words, the observation belongs to y {\displaystyle y} if corresponding x → {\displaystyle {\vec {x}}} is located on a certain side of a hyperplane perpendicular to w → {\displaystyle {\vec {w}}} . The location of the plane is defined by the threshold c {\displaystyle c} . == Assumptions == The assumptions of discriminant analysis are the same as those for MANOVA. The analysis is quite sensitive to outliers and the size of the smallest group must be larger than the number of predictor variables. Multivariate normality: Independent variables are normal for each level of the grouping variable. Homogeneity of variance/covariance (homoscedasticity): Variances among group variables are the same across levels of predictors. Can be tested with Box's M statistic. It has been suggested, however, that linear discriminant analysis be used when covariances are equal, and that quadratic discriminant analysis may be used when covariances are not equal. Independence: Participants are assumed to be randomly sampled, and a participant's score on one variable is assumed to be independent of scores on that variable for all other participants. It has been suggested that discriminant analysis is relatively robust to slight violations of these assumptions, and it has also been shown that discriminant analysis may still be reliable when using dichotomous variables (where multivariate normality is often violated). == Discriminant functions == Discriminant analysis works by creating one or more linear combinations of predictors, creating a new latent variable for each function. These functions are called discriminant functions. The number of functions possible is either N g − 1 {\displaystyle N_{g}-1} where N g {\displaystyle N_{g}} = number of groups, or p {\displaystyle p} (the number of predictors), whichever is smaller. The first function created maximizes the differences between groups on that function. The second function maximizes differences on that function, but also must not be correlated with the previous function. This continues with subsequent functions with the requirement that the new function not be correlated with any of the previous functions. Given group j {\displaystyle j} , with R j {\displaystyle \mathbb {R} _{j}} sets of sample space, there is a discriminant rule such that if x ∈ R j {\displaystyle x\in \mathbb {R} _{j}} , then x ∈ j {\displaystyle x\in j} . Discriminant analysis then, finds “good” regions of R j {\displaystyle \mathbb {R} _{j}} to minimize classification error, therefore leading to a high percent correct classified in the classification table. Each function is given a discriminant score to determine how well it predicts group placement. Structure Corr

  Read more →
• 

  Language identification in the limit

  Language identification in the limit is a formal model for inductive inference of formal languages, mainly by computers (see machine learning and induction of regular languages). It was introduced by E. Mark Gold in a technical report and a journal article with the same title. In this model, a teacher provides to a learner some presentation (i.e. a sequence of strings) of some formal language. The learning is seen as an infinite process. Each time the learner reads an element of the presentation, it should provide a representation (e.g. a formal grammar) for the language. Gold defines that a learner can identify in the limit a class of languages if, given any presentation of any language in the class, the learner will produce only a finite number of wrong representations, and then stick with the correct representation. However, the learner need not be able to announce its correctness; and the teacher might present a counterexample to any representation arbitrarily long after. Gold defined two types of presentations: Text (positive information): an enumeration of all strings the language consists of. Complete presentation (positive and negative information): an enumeration of all possible strings, each with a label indicating if the string belongs to the language or not. == Learnability == This model is an early attempt to formally capture the notion of learnability. Gold's journal article introduces for contrast the stronger models Finite identification (where the learner has to announce correctness after a finite number of steps), and Fixed-time identification (where correctness has to be reached after an apriori-specified number of steps). A weaker formal model of learnability is the Probably approximately correct learning (PAC) model, introduced by Leslie Valiant in 1984. == Examples == It is instructive to look at concrete examples (in the tables) of learning sessions the definition of identification in the limit speaks about. A fictitious session to learn a regular language L over the alphabet {a,b} from text presentation:In each step, the teacher gives a string belonging to L, and the learner answers a guess for L, encoded as a regular expression. In step 3, the learner's guess is not consistent with the strings seen so far; in step 4, the teacher gives a string repeatedly. After step 6, the learner sticks to the regular expression (ab+ba). If this happens to be a description of the language L the teacher has in mind, it is said that the learner has learned that language.If a computer program for the learner's role would exist that was able to successfully learn each regular language, that class of languages would be identifiable in the limit. Gold has shown that this is not the case. A particular learning algorithm always guessing L to be just the union of all strings seen so far:If L is a finite language, the learner will eventually guess it correctly, however, without being able to tell when. Although the guess didn't change during step 3 to 6, the learner couldn't be sure to be correct.Gold has shown that the class of finite languages is identifiable in the limit, however, this class is neither finitely nor fixed-time identifiable. Learning from complete presentation by telling:In each step, the teacher gives a string and tells whether it belongs to L (green) or not (red, struck-out). Each possible string is eventually classified in this way by the teacher. Learning from complete presentation by request:The learner gives a query string, the teacher tells whether it belongs to L (yes) or not (no); the learner then gives a guess for L, followed by the next query string. In this example, the learner happens to query in each step just the same string as given by the teacher in example 3.In general, Gold has shown that each language class identifiable in the request-presentation setting is also identifiable in the telling-presentation setting, since the learner, instead of querying a string, just needs to wait until it is eventually given by the teacher. == Gold's theorem == More formally, a language L {\displaystyle L} is a nonempty set, and its elements are called sentences. a language family is a set of languages. a language-learning environment E {\displaystyle E} for a language L {\displaystyle L} is a stream of sentences from L {\displaystyle L} , such that each sentence in L {\displaystyle L} appears at least once. a language learner is a function f {\displaystyle f} that sends a list of sentences to a language. This is interpreted as saying that, after seeing sentences a 1 , a 2 . . . , a n {\displaystyle a_{1},a_{2}...,a_{n}} in that order, the language learner guesses that the language that produces the sentences should be f ( a 1 , . . . , a n ) {\displaystyle f(a_{1},...,a_{n})} . Note that the learner is not obliged to be correct — it could very well guess a language that does not even contain a 1 , . . . , a n {\displaystyle a_{1},...,a_{n}} . a language learner f {\displaystyle f} learns a language L {\displaystyle L} in environment E = ( a 1 , a 2 , . . . ) {\displaystyle E=(a_{1},a_{2},...)} if the learner always guesses L {\displaystyle L} after seeing enough examples from the environment. a language learner f {\displaystyle f} learns a language L {\displaystyle L} if it learns L {\displaystyle L} in any environment E {\displaystyle E} for L {\displaystyle L} . a language family is learnable if there exists a language learner that can learn all languages in the family. Notes: In the context of Gold's theorem, sentences need only be distinguishable. They need not be anything in particular, such as finite strings (as usual in formal linguistics). Learnability is not a concept for individual languages. Any individual language L {\displaystyle L} could be learned by a trivial learner that always guesses L {\displaystyle L} . Learnability is not a concept for individual learners. A language family is learnable if, and only if, there exists some learner that can learn the family. It does not matter how well the learner performs for learning languages outside the family. Gold's theorem is easily bypassed if negative examples are allowed. In particular, the language family { L 1 , L 2 , . . . , L ∞ } {\displaystyle \{L_{1},L_{2},...,L_{\infty }\}} can be learned by a learner that always guesses L ∞ {\displaystyle L_{\infty }} until it receives the first negative example ¬ a n {\displaystyle \neg a_{n}} , where a n ∈ L n + 1 ∖ L n {\displaystyle a_{n}\in L_{n+1}\setminus L_{n}} , at which point it always guesses L n {\displaystyle L_{n}} . == Learnability characterization == Dana Angluin gave the characterizations of learnability from text (positive information) in a 1980 paper. If a learner is required to be effective, then an indexed class of recursive languages is learnable in the limit if there is an effective procedure that uniformly enumerates tell-tales for each language in the class (Condition 1). It is not hard to see that if an ideal learner (i.e., an arbitrary function) is allowed, then an indexed class of languages is learnable in the limit if each language in the class has a tell-tale (Condition 2). == Language classes learnable in the limit == The table shows which language classes are identifiable in the limit in which learning model. On the right-hand side, each language class is a superclass of all lower classes. Each learning model (i.e. type of presentation) can identify in the limit all classes below it. In particular, the class of finite languages is identifiable in the limit by text presentation (cf. Example 2 above), while the class of regular languages is not. Pattern Languages, introduced by Dana Angluin in another 1980 paper, are also identifiable by normal text presentation; they are omitted in the table, since they are above the singleton and below the primitive recursive language class, but incomparable to the classes in between. == Sufficient conditions for learnability == Condition 1 in Angluin's paper is not always easy to verify. Therefore, people come up with various sufficient conditions for the learnability of a language class. See also Induction of regular languages for learnable subclasses of regular languages. === Finite thickness === A class of languages has finite thickness if every non-empty set of strings is contained in at most finitely many languages of the class. This is exactly Condition 3 in Angluin's paper. Angluin showed that if a class of recursive languages has finite thickness, then it is learnable in the limit. A class with finite thickness certainly satisfies MEF-condition and MFF-condition; in other words, finite thickness implies M-finite thickness. === Finite elasticity === A class of languages is said to have finite elasticity if for every infinite sequence of strings s 0 , s 1 , . . . {\displaystyle s_{0},s_{1},...} and every infinite sequence of languages in the class L 1 , L 2 , . . . {\displaystyle L_{1},L_{2},...} , there exists a finite number n such

  Read more →
• 

  Almeida–Pineda recurrent backpropagation

  Almeida–Pineda recurrent backpropagation is an extension to the backpropagation algorithm that is applicable to recurrent neural networks. It is a type of supervised learning. It was described somewhat cryptically in Richard Feynman's senior thesis, and rediscovered independently in the context of artificial neural networks by both Fernando Pineda and Luis B. Almeida. A recurrent neural network for this algorithm consists of some input units, some output units and eventually some hidden units. For a given set of (input, target) states, the network is trained to settle into a stable activation state with the output units in the target state, based on a given input state clamped on the input units.

  Read more →
• 

  Multimedia database

  A Multimedia database (MMDB) is a collection of related for multimedia data. The multimedia data include one or more primary media data types such as text, images, graphic objects (including drawings, sketches and illustrations) animation sequences, audio and video. A Multimedia Database Management System (MMDBMS) is a framework that manages different types of data potentially represented in a wide diversity of formats on a wide array of media sources. It provides support for multimedia data types, and facilitate for creation, storage, access, query and control of a multimedia database. == Contents of MMDB == A Multimedia Database (MMDB) hosts one or more multimedia data types (i.e. text, images, graphic objects, audio, video, animation sequences). These data types are broadly categorized into three classes: Static media (time-independent: image and graphic object). Dynamic media (time-dependent: audio, video and animation). Dimensional media(3D game and computer aided drafting programs). === Comparison of multimedia data types === Additionally, a Multimedia Database (MMDB) needs to manage additional information pertaining to the actual multimedia data. The information is about the following: Media data: the actual data representing an object. Media format data: information about the format of the media data after it goes through the acquisition, processing, and encoding phases. Media keyword data: the keyword descriptions, usually relating to the generation of the media data. Media feature data: content dependent data such as contain information about the distribution of colours, the kinds of textures and the different shapes present in an image. The last three types are called metadata as they describe several different aspects of the media data. The media keyword data and media feature data are used as indices for searching purpose. The media format data is used to present the retrieved information. == Requirements of Multimedia databases == Like the traditional databases, Multimedia databases should address the following requirements: Integration Data items do not need to be duplicated for different programs invocations Data independence Separate the database and the management from the application programs Concurrency control Allows concurrent transactions Persistence Data objects can be saved and re-used by different transactions and program invocations Privacy Access and authorization control Integrity control Ensures database consistency between transactions Recovery Failures of transactions should not affect the persistent data storage Query support Allows easy querying of multimedia data Multimedia databases should have the ability to uniformly query data (media data, textual data) represented in different formats and have the ability to simultaneously query different media sources and conduct classical database operations across them. (Query support) They should have the ability to retrieve media objects from a local storage device in a good manner. (Storage support) They should have the ability to take the response generated by a query and develop a presentation of that response in terms of audio-visual media and have the ability to deliver this presentation. (Presentation and delivery support) == Issues and challenges == Multimedia data consists of a variety of media formats or file representations including TIFF, BMP, PPT, IVUE, FPX, JPEG, MPEG, AVI, MID, WAV, DOC, GIF, EPS, PNG, etc. Because of restrictions on the conversion from one format to the other, the use of the data in a specific format has been limited as well. Usually, the data size of multimedia is large such as video; therefore, multimedia data often require a large storage. Multimedia database consume a lot of processing time, as well as bandwidth. Some multimedia data types such as video, audio, and animation sequences have temporal requirements that have implications on their storage, manipulation and presentation, but images, video and graphics data have special constraints in terms of their content. == Application areas == Examples of multimedia database application areas: Digital Libraries News-on-Demand Video-on-Demand Music database Geographic Information Systems (GIS) Telemedicine

  Read more →
• 

  European Conference on Computer Vision

  The European Conference on Computer Vision (ECCV) is a biennial research conference with the proceedings published by Springer Science+Business Media. Similar to ICCV in scope and quality, it is held those years which ICCV is not. It is considered to be one of the top conferences in computer vision, alongside CVPR and ICCV, with an 'A' rating from the Australian Ranking of ICT Conferences and an 'A1' rating from the Brazilian ministry of education. The acceptance rate for ECCV 2010 was 24.4% for posters and 3.3% for oral presentations. Like other top computer vision conferences, ECCV has tutorial talks, technical sessions, and poster sessions. The conference is usually spread over five to six days with the main technical program occupying three days in the middle, and tutorial and workshops, focused on specific topics, being held in the beginning and at the end. The ECCV presents the Koenderink Prize annually to recognize fundamental contributions in computer vision. == Location == The conference is usually held in autumn in Europe.

  Read more →
• 

  Robust principal component analysis

  Robust Principal Component Analysis (RPCA) is a modification of the widely used statistical procedure of principal component analysis (PCA) which works well with respect to grossly corrupted observations. A number of different approaches exist for Robust PCA, including an idealized version of Robust PCA, which aims to recover a low-rank matrix L0 from highly corrupted measurements M = L0 +S0. This decomposition in low-rank and sparse matrices can be achieved by techniques such as Principal Component Pursuit method (PCP), Stable PCP, Quantized PCP, Block based PCP, and Local PCP. Then, optimization methods are used such as the Augmented Lagrange Multiplier Method (ALM), Alternating Direction Method (ADM), Fast Alternating Minimization (FAM), Iteratively Reweighted Least Squares (IRLS ) or alternating projections (AP). == Algorithms == === Non-convex method === The 2014 guaranteed algorithm for the robust PCA problem (with the input matrix being M = L + S {\displaystyle M=L+S} ) is an alternating minimization type algorithm. The computational complexity is O ( m n r 2 log ⁡ 1 ϵ ) {\displaystyle O\left(mnr^{2}\log {\frac {1}{\epsilon }}\right)} where the input is the superposition of a low-rank (of rank r {\displaystyle r} ) and a sparse matrix of dimension m × n {\displaystyle m\times n} and ϵ {\displaystyle \epsilon } is the desired accuracy of the recovered solution, i.e., ‖ L ^ − L ‖ F ≤ ϵ {\displaystyle \|{\widehat {L}}-L\|_{F}\leq \epsilon } where L {\displaystyle L} is the true low-rank component and L ^ {\displaystyle {\widehat {L}}} is the estimated or recovered low-rank component. Intuitively, this algorithm performs projections of the residual onto the set of low-rank matrices (via the SVD operation) and sparse matrices (via entry-wise hard thresholding) in an alternating manner - that is, low-rank projection of the difference the input matrix and the sparse matrix obtained at a given iteration followed by sparse projection of the difference of the input matrix and the low-rank matrix obtained in the previous step, and iterating the two steps until convergence. This alternating projections algorithm is later improved by an accelerated version, coined AccAltProj. The acceleration is achieved by applying a tangent space projection before projecting the residue onto the set of low-rank matrices. This trick improves the computational complexity to O ( m n r log ⁡ 1 ϵ ) {\displaystyle O\left(mnr\log {\frac {1}{\epsilon }}\right)} with a much smaller constant in front while it maintains the theoretically guaranteed linear convergence. Another fast version of accelerated alternating projections algorithm is IRCUR. It uses the structure of CUR decomposition in alternating projections framework to dramatically reduces the computational complexity of RPCA to O ( max { m , n } r 2 log ⁡ ( m ) log ⁡ ( n ) log ⁡ 1 ϵ ) {\displaystyle O\left(\max\{m,n\}r^{2}\log(m)\log(n)\log {\frac {1}{\epsilon }}\right)} === Convex relaxation === This method consists of relaxing the rank constraint r a n k ( L ) {\displaystyle rank(L)} in the optimization problem to the nuclear norm ‖ L ‖ ∗ {\displaystyle \|L\|_{}} and the sparsity constraint ‖ S ‖ 0 {\displaystyle \|S\|_{0}} to ℓ 1 {\displaystyle \ell _{1}} -norm ‖ S ‖ 1 {\displaystyle \|S\|_{1}} . The resulting program can be solved using methods such as the method of Augmented Lagrange Multipliers. === Deep-learning augmented method === Some recent works propose RPCA algorithms with learnable/training parameters. Such a learnable/trainable algorithm can be unfolded as a deep neural network whose parameters can be learned via machine learning techniques from a given dataset or problem distribution. The learned algorithm will have superior performance on the corresponding problem distribution. == Applications == RPCA has many real life important applications particularly when the data under study can naturally be modeled as a low-rank plus a sparse contribution. Following examples are inspired by contemporary challenges in computer science, and depending on the applications, either the low-rank component or the sparse component could be the object of interest: === Video surveillance === Given a sequence of surveillance video frames, it is often required to identify the activities that stand out from the background. If we stack the video frames as columns of a matrix M, then the low-rank component L0 naturally corresponds to the stationary background and the sparse component S0 captures the moving objects in the foreground. === Face recognition === Images of a convex, Lambertian surface under varying illuminations span a low-dimensional subspace. This is one of the reasons for effectiveness of low-dimensional models for imagery data. In particular, it is easy to approximate images of a human's face by a low-dimensional subspace. To be able to correctly retrieve this subspace is crucial in many applications such as face recognition and alignment. It turns out that RPCA can be applied successfully to this problem to exactly recover the face.

  Read more →