AI Detection Remover

AI Detection Remover — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Scanimate

Scanimate is an analog computer animation (video synthesizer) system created by Lee Harrison III of Denver, Colorado. Harrison had developed its predecessor, ANIMAC, which generated used a motion capture system, based on a body suit with potentiometers. In contrast, Scanimate included TV technology. Scanimate's successor was called Caesar, and used a digital computer to control the analog system. The eight Scanimate systems were used to produce much of the video-based animation seen on television between most of the 1970s and early 1980s in commercials, promotions, and show openings. One of the major advantages the Scanimate system had over film-based animation and computer animation was the ability to create animations in real time. The speed with which animation could be produced on the system because of this, as well as its range of possible effects, helped it to supersede film-based animation techniques for television graphics. By the mid-1980s, it was superseded by digital computer animation, which produced sharper images and more sophisticated 3D imagery. Animations created on Scanimate and similar analog computer animation systems have a number of characteristic features that distinguish them from film-based animation: the motion is extremely fluid, using all 60 fields per second (in NTSC format video) or 50 fields (in PAL format video) rather than the 24 frames per second that film uses; the colors are much brighter and more saturated; and the images have a very "electronic" look that results from the direct manipulation of video signals through which the Scanimate produces the images. == How it works == A special high-resolution (around 945 lines) monochrome camera records high-contrast artwork. The image is then displayed on a high-resolution screen. Unlike a normal monitor, its deflection signals are passed through a special analog computer that enables the operator to bend the image in a variety of ways. The image is then shot from the screen by either a film camera or a video camera. In the case of a video camera, this signal is then fed into a colorizer, a device that takes certain shades of grey and turns it into color as well as transparency. The idea behind this is that the output of the Scanimate itself is always monochrome. Another advantage of the colorizer is that it gives the operator the ability to continuously add layers of graphics. This makes possible the creation of very complex graphics. This is done by using two video recorders. The background is played by one recorder and then recorded by another one. This process is repeated for every layer. This requires very high-quality video recorders (such as both the Ampex VR-2000 or IVC's IVC-9000 of Scanimate's era, the IVC-9000 being used quite frequently for Scanimate composition due to its very high generational quality between re-recordings). == Current usage == Two of the Scanimates are still in use at ZFx studios in Asheville, North Carolina. The original "Black Swan" R&D machine has been updated with more modern power supplies and can produce material in standard or 1080P high definition video. The "white Pearl" machine is the last one produced and is being kept in its original configuration for historical purposes by David Sieg at ZFx inc. The machines are installed in a working production environment with Grass Valley switchers, Kaleidoscope digital video effects systems, and Accom digital disk recorders for layering. == Use in television, music and films == === Music videos === Let's Groove by Earth, Wind & Fire Get Down on It by Kool & the Gang Blame It on the Boogie by The Jacksons Knock on Wood by Amii Stewart Popcorn Love by New Edition === TV programs/movies === === TV channels/home video/TV productions ===
Read more →
Low-rank approximation

In mathematics, low-rank approximation refers to the process of approximating a given matrix by a matrix of lower rank. More precisely, it is a minimization problem, in which the cost function measures the fit between a given matrix (the data) and an approximating matrix (the optimization variable), subject to a constraint that the approximating matrix has reduced rank. The problem is used for mathematical modeling and data compression. The rank constraint is related to a constraint on the complexity of a model that fits the data. In applications, often there are other constraints on the approximating matrix apart from the rank constraint, e.g., non-negativity and Hankel structure. Low-rank approximation is closely related to numerous other techniques, including principal component analysis, factor analysis, total least squares, latent semantic analysis, orthogonal regression, and dynamic mode decomposition. == Definition == Given structure specification S : R n p → R m × n {\displaystyle {\mathcal {S}}:\mathbb {R} ^{n_{p}}\to \mathbb {R} ^{m\times n}} , vector of structure parameters p ∈ R n p {\displaystyle p\in \mathbb {R} ^{n_{p}}} , norm ‖ ⋅ ‖ {\displaystyle \|\cdot \|} , and desired rank r {\displaystyle r} , minimize over p ^ ‖ p − p ^ ‖ subject to rank ⁡ ( S ( p ^ ) ) ≤ r . {\displaystyle {\text{minimize}}\quad {\text{over }}{\widehat {p}}\quad \|p-{\widehat {p}}\|\quad {\text{subject to}}\quad \operatorname {rank} {\big (}{\mathcal {S}}({\widehat {p}}){\big )}\leq r.} == Applications == Linear system identification, in which case the approximating matrix is Hankel structured. Machine learning, in which case the approximating matrix is nonlinearly structured. Recommender systems, in which cases the data matrix has missing values and the approximation is categorical. Distance matrix completion, in which case there is a positive definiteness constraint. Natural language processing, in which case the approximation is nonnegative. Computer algebra, in which case the approximation is Sylvester structured. Matrix product states, in which case the approximation is usually rescaled to have fixed Frobenius norm. == Basic low-rank approximation problem == The unstructured problem with fit measured by the Frobenius norm, i.e., minimize over D ^ ‖ D − D ^ ‖ F subject to rank ⁡ ( D ^ ) ≤ r {\displaystyle {\text{minimize}}\quad {\text{over }}{\widehat {D}}\quad \|D-{\widehat {D}}\|_{\text{F}}\quad {\text{subject to}}\quad \operatorname {rank} {\big (}{\widehat {D}}{\big )}\leq r} has an analytic solution in terms of the singular value decomposition of the data matrix. The result is referred to as the matrix approximation lemma or Eckart–Young–Mirsky theorem. This problem was originally solved by Erhard Schmidt in the infinite dimensional context of integral operators (although his methods easily generalize to arbitrary compact operators on Hilbert spaces) and later rediscovered by C. Eckart and G. Young. L. Mirsky generalized the result to arbitrary unitarily invariant norms. Let D = U Σ V ⊤ ∈ R m × n , m ≥ n {\displaystyle D=U\Sigma V^{\top }\in \mathbb {R} ^{m\times n},\quad m\geq n} be the singular value decomposition of D {\displaystyle D} , where Σ =: diag ⁡ ( σ 1 , … , σ r ) {\displaystyle \Sigma =:\operatorname {diag} (\sigma _{1},\ldots ,\sigma _{r})} , where r ≤ min { m , n } = n {\displaystyle r\leq \min\{m,n\}=n} , is the m × n {\displaystyle m\times n} rectangular diagonal matrix with r {\displaystyle r} non-zero singular values σ 1 ≥ … ≥ σ r > σ r + 1 = … = σ n = 0 {\displaystyle \sigma _{1}\geq \ldots \geq \sigma _{r}>\sigma _{r+1}=\ldots =\sigma _{n}=0} . For a given k ∈ { 1 , … , r } {\displaystyle k\in \{1,\dots ,r\}} , partition U {\displaystyle U} , Σ {\displaystyle \Sigma } , and V {\displaystyle V} as follows: U =: [ U 1 U 2 ] , Σ =: [ Σ 1 0 0 Σ 2 ] , and V =: [ V 1 V 2 ] , {\displaystyle U=:{\begin{bmatrix}U_{1}&U_{2}\end{bmatrix}},\quad \Sigma =:{\begin{bmatrix}\Sigma _{1}&0\\0&\Sigma _{2}\end{bmatrix}},\quad {\text{and}}\quad V=:{\begin{bmatrix}V_{1}&V_{2}\end{bmatrix}},} where U 1 {\displaystyle U_{1}} is m × k {\displaystyle m\times k} , Σ 1 {\displaystyle \Sigma _{1}} is k × k {\displaystyle k\times k} , and V 1 {\displaystyle V_{1}} is n × k {\displaystyle n\times k} . Then the rank k {\displaystyle k} matrix D ^ ∗ := U 1 Σ 1 V 1 ⊤ , {\displaystyle {\widehat {D}}^{}:=U_{1}\Sigma _{1}V_{1}^{\top },} obtained from the truncated singular value decomposition is such that ‖ D − D ^ ∗ ‖ F = min rank ⁡ ( D ^ ) ≤ k ‖ D − D ^ ‖ F = σ k + 1 2 + ⋯ + σ r 2 . {\displaystyle \|D-{\widehat {D}}^{}\|_{\text{F}}=\min _{\operatorname {rank} ({\widehat {D}})\leq k}\|D-{\widehat {D}}\|_{\text{F}}={\sqrt {\sigma _{k+1}^{2}+\cdots +\sigma _{r}^{2}}}.} The minimizer D ^ ∗ {\displaystyle {\widehat {D}}^{}} is unique if and only if σ k > σ k + 1 {\displaystyle \sigma _{k}>\sigma _{k+1}} . == Proof of Eckart–Young–Mirsky theorem (for spectral norm) == Let A ∈ R m × n {\displaystyle A\in \mathbb {R} ^{m\times n}} be a real (possibly rectangular) matrix with m ≤ n {\displaystyle m\leq n} . Suppose that A = U Σ V ⊤ {\displaystyle A=U\Sigma V^{\top }} is the singular value decomposition of A {\displaystyle A} . Recall that U {\displaystyle U} and V {\displaystyle V} are orthogonal matrices, and Σ {\displaystyle \Sigma } is an m × n {\displaystyle m\times n} diagonal matrix with entries ( σ 1 , σ 2 , ⋯ , σ m ) {\displaystyle (\sigma _{1},\sigma _{2},\cdots ,\sigma _{m})} such that σ 1 ≥ σ 2 ≥ ⋯ ≥ σ m ≥ 0 {\displaystyle \sigma _{1}\geq \sigma _{2}\geq \cdots \geq \sigma _{m}\geq 0} . We claim that the best rank- k {\displaystyle k} approximation to A {\displaystyle A} in the spectral norm, denoted by ‖ ⋅ ‖ 2 {\displaystyle \|\cdot \|_{2}} , is given by A k := ∑ i = 1 k σ i u i v i ⊤ {\displaystyle A_{k}:=\sum _{i=1}^{k}\sigma _{i}u_{i}v_{i}^{\top }} where u i {\displaystyle u_{i}} and v i {\displaystyle v_{i}} denote the i {\displaystyle i} th column of U {\displaystyle U} and V {\displaystyle V} , respectively. First, note that we have ‖ A − A k ‖ 2 = ‖ ∑ i = 1 n σ i u i v i ⊤ − ∑ i = 1 k σ i u i v i ⊤ ‖ 2 = ‖ ∑ i = k + 1 n σ i u i v i ⊤ ‖ 2 = σ k + 1 {\displaystyle \|A-A_{k}\|_{2}=\left\|\sum _{i=1}^{\color {red}{n}}\sigma _{i}u_{i}v_{i}^{\top }-\sum _{i=1}^{\color {red}{k}}\sigma _{i}u_{i}v_{i}^{\top }\right\|_{2}=\left\|\sum _{i=\color {red}{k+1}}^{n}\sigma _{i}u_{i}v_{i}^{\top }\right\|_{2}=\sigma _{k+1}} Therefore, we need to show that if B k = X Y ⊤ {\displaystyle B_{k}=XY^{\top }} where X {\displaystyle X} and Y {\displaystyle Y} have k {\displaystyle k} columns then ‖ A − A k ‖ 2 = σ k + 1 ≤ ‖ A − B k ‖ 2 {\displaystyle \|A-A_{k}\|_{2}=\sigma _{k+1}\leq \|A-B_{k}\|_{2}} . Since Y {\displaystyle Y} has k {\displaystyle k} columns, then there must be a nontrivial linear combination of the first k + 1 {\displaystyle k+1} columns of V {\displaystyle V} , i.e., w = γ 1 v 1 + ⋯ + γ k + 1 v k + 1 , {\displaystyle w=\gamma _{1}v_{1}+\cdots +\gamma _{k+1}v_{k+1},} such that Y ⊤ w = 0 {\displaystyle Y^{\top }w=0} . Without loss of generality, we can scale w {\displaystyle w} so that ‖ w ‖ 2 = 1 {\displaystyle \|w\|_{2}=1} or (equivalently) γ 1 2 + ⋯ + γ k + 1 2 = 1 {\displaystyle \gamma _{1}^{2}+\cdots +\gamma _{k+1}^{2}=1} . Therefore, ‖ A − B k ‖ 2 2 ≥ ‖ ( A − B k ) w ‖ 2 2 = ‖ A w ‖ 2 2 = γ 1 2 σ 1 2 + ⋯ + γ k + 1 2 σ k + 1 2 ≥ σ k + 1 2 . {\displaystyle \|A-B_{k}\|_{2}^{2}\geq \|(A-B_{k})w\|_{2}^{2}=\|Aw\|_{2}^{2}=\gamma _{1}^{2}\sigma _{1}^{2}+\cdots +\gamma _{k+1}^{2}\sigma _{k+1}^{2}\geq \sigma _{k+1}^{2}.} The result follows by taking the square root of both sides of the above inequality. == Proof of Eckart–Young–Mirsky theorem (for Frobenius norm) == Let A ∈ R m × n {\displaystyle A\in \mathbb {R} ^{m\times n}} be a real (possibly rectangular) matrix with m ≤ n {\displaystyle m\leq n} . Suppose that A = U Σ V ⊤ {\displaystyle A=U\Sigma V^{\top }} is the singular value decomposition of A {\displaystyle A} . We claim that the best rank k {\displaystyle k} approximation to A {\displaystyle A} in the Frobenius norm, denoted by ‖ ⋅ ‖ F {\displaystyle \|\cdot \|_{F}} , is given by A k = ∑ i = 1 k σ i u i v i ⊤ {\displaystyle A_{k}=\sum _{i=1}^{k}\sigma _{i}u_{i}v_{i}^{\top }} where u i {\displaystyle u_{i}} and v i {\displaystyle v_{i}} denote the i {\displaystyle i} th column of U {\displaystyle U} and V {\displaystyle V} , respectively. First, note that we have ‖ A − A k ‖ F 2 = ‖ ∑ i = k + 1 n σ i u i v i ⊤ ‖ F 2 = ∑ i = k + 1 n σ i 2 {\displaystyle \|A-A_{k}\|_{F}^{2}=\left\|\sum _{i=k+1}^{n}\sigma _{i}u_{i}v_{i}^{\top }\right\|_{F}^{2}=\sum _{i=k+1}^{n}\sigma _{i}^{2}} Therefore, we need to show that if B k = X Y ⊤ {\displaystyle B_{k}=XY^{\top }} where X {\displaystyle X} and Y {\displaystyle Y} have k {\displaystyle k} columns then ‖ A − A k ‖ F 2 = ∑ i = k + 1 n σ i 2 ≤ ‖ A − B k ‖ F 2 . {\displaystyle \|A-A_{k}\|_{F}^{2}=\sum _{i=k+1}^{n}\sigma _{i}^{2}\leq \|A-B_{k}\|_{F}^{2}.} By the triangle inequality with the spectral norm
Read more →
Yooreeka

Yooreeka is a library for data mining, machine learning, soft computing, and mathematical analysis. The project started with the code of the book "Algorithms of the Intelligent Web". Although the term "Web" prevailed in the title, in essence, the algorithms are valuable in any software application. It covers all major algorithms and provides many examples. Yooreeka 2.x is licensed under the Apache License rather than the somewhat more restrictive LGPL (which was the license of v1.x). The library is written 100% in the Java language. == Algorithms == The following algorithms are covered: Clustering Hierarchical—Agglomerative (e.g. MST single link; ROCK) and Divisive Partitional (e.g. k-means) Classification Bayesian Decision trees Neural Networks Rule based (via Drools) Recommendations Collaborative filtering Content based Search PageRank DocRank Personalization
Read more →
Winner-take-all (computing)

Winner-take-all is a computational principle applied in computational models of neural networks by which neurons compete with each other for activation. In the classical form, only the neuron with the highest activation stays active while all other neurons shut down; however, other variations allow more than one neuron to be active, for example the soft winner take-all, by which a power function is applied to the neurons. == Neural networks == In the theory of artificial neural networks, winner-take-all networks are a case of competitive learning in recurrent neural networks. Output nodes in the network mutually inhibit each other, while simultaneously activating themselves through reflexive connections. After some time, only one node in the output layer will be active, namely the one corresponding to the strongest input. Thus the network uses nonlinear inhibition to pick out the largest of a set of inputs. Winner-take-all is a general computational primitive that can be implemented using different types of neural network models, including both continuous-time and spiking networks. Winner-take-all networks are commonly used in computational models of the brain, particularly for distributed decision-making or action selection in the cortex. Important examples include hierarchical models of vision, and models of selective attention and recognition. They are also common in artificial neural networks and neuromorphic analog VLSI circuits. It has been formally proven that the winner-take-all operation is computationally powerful compared to other nonlinear operations, such as thresholding. In many practical cases, there is not only one single neuron which becomes active but there are exactly k neurons which become active for a fixed number k. This principle is referred to as k-winners-take-all. === Example algorithm === Consider a single linear neuron, with inputs x 1 , … , x n {\displaystyle x_{1},\dots ,x_{n}} . Each input has weight w i {\displaystyle w_{i}} , and the output of the neuron is ∑ i w i x i {\displaystyle \sum _{i}w_{i}x_{i}} . In the Instar learning rule, on each input vector, the weight vectors are modified according to Δ w i = η ( x i − w i ) {\displaystyle \Delta w_{i}=\eta (x_{i}-w_{i})} where η {\displaystyle \eta } is the learning rate. This rule is unsupervised, since we need just the input vector, not a reference output. Now, consider multiple linear neurons y 1 , … , y m {\displaystyle y_{1},\dots ,y_{m}} . The output of each satisfies y i = ∑ j w i j x j {\displaystyle y_{i}=\sum _{j}w_{ij}x_{j}} . In the winner-take-all algorithm, the weights are modified as follows. Given an input vector x {\displaystyle x} , each output is computed. The neuron with the largest output is selected, and the weights going into that neuron are modified according to the Instar learning rule. All other weights remain unchanged. The k-winners-take-all rule is similar, except that the Instar learning rule is applied to the weights going into the k neurons with the largest outputs. == Circuit example == A simple, but popular CMOS winner-take-all circuit is shown on the right. This circuit was originally proposed by Lazzaro et al. (1989) using MOS transistors biased to operate in the weak-inversion or subthreshold regime. In the particular case shown there are only two inputs (IIN,1 and IIN,2), but the circuit can be easily extended to multiple inputs in a straightforward way. It operates on continuous-time input signals (currents) in parallel, using only two transistors per input. In addition, the bias current IBIAS is set by a single global transistor that is common to all the inputs. The largest of the input currents sets the common potential VC. As a result, the corresponding output carries almost all the bias current, while the other outputs have currents that are close to zero. Thus, the circuit selects the larger of the two input currents, i.e., if IIN,1 > IIN,2, we get IOUT,1 = IBIAS and IOUT,2 = 0. Similarly, if IIN,2 > IIN,1, we get IOUT,1 = 0 and IOUT,2 = IBIAS. A SPICE-based DC simulation of the CMOS winner-take-all circuit in the two-input case is shown on the right. As shown in the top subplot, the input IIN,1 was fixed at 6nA, while IIN,2 was linearly increased from 0 to 10nA. The bottom subplot shows the two output currents. As expected, the output corresponding to the larger of the two inputs carries the entire bias current (10nA in this case), forcing the other output current nearly to zero. == Other uses == In stereo matching algorithms, following the taxonomy proposed by Scharstein and Szelliski, winner-take-all is a local method for disparity computation. Adopting a winner-take-all strategy, the disparity associated with the minimum or maximum cost value is selected at each pixel. It is axiomatic that in the electronic commerce market, early dominant players such as AOL or Yahoo! get most of the rewards. By 1998, one study found the top 5% of all web sites garnered more than 74% of all traffic. The winner-take-all hypothesis in economics suggests that once a technology or a firm gets ahead, it will do better and better over time, whereas lagging technology and firms will fall further behind. See First-mover advantage.
Read more →
Continuum robot

A continuum robot is a type of robot that is characterised by infinite degrees of freedom and number of joints. These characteristics allow continuum manipulators to adjust and modify their shape at any point along their length, granting them the possibility to work in confined spaces and complex environments where standard rigid-link robots cannot operate. In particular, we can define a continuum robot as an actuatable structure whose constitutive material forms curves with continuous tangent vectors. This is a fundamental definition that allows to distinguish between continuum robots and snake-arm robots or hyper-redundant manipulators: the presence of rigid links and joints allows them to only approximately perform curves with continuous tangent vectors. The design of continuum robots is bioinspired, as the intent is to resemble biological trunks, snakes and tentacles. Several concepts of continuum robots have been commercialised and can be found in many different domains of application, ranging from the medical field to undersea exploration. == Classification == Continuum robots can be categorised according to two main criteria: structure and actuation. === Structure === The main characteristic of the design of continuum robots is the presence of a continuously curving core structure, named backbone, whose shape can be actuated. The backbone must also be compliant, meaning that the backbone yields smoothly to external loads. According to the design principles chosen for the continuum manipulator, we can distinguish between: single-backbone: these continuum manipulators have one central elastic backbone through which actuation/transmission elements can run. multi-backbone: the structure of these continuum robots has two or more elastic elements (either rods or tubes) parallel to each other and constrained with one another in some way. concentric-tube: the backbone is made of concentric tubes that are free to rotate and translate between each other, depending on the actuation happening at the base of the robot. === Actuation === The actuation strategy of continuum manipulators can be distinguished between extrinsic or intrinsic actuation, depending on where the actuation happens: extrinsic actuation: the actuation happens outside the main structure of the robot and the forces are transmitted via mechanical transmission; among these techniques, there are cable/tendon driven actuators and multi-backbone strategies. intrinsic actuation: the actuation mechanism operates within the structure of the robot; these strategies include pneumatic or hydraulic chambers and the shape memory effect. The Actuated Flexible Manifold (AFM), introduced by Medina, Shapiro, and Shvalb (2016), models flexible grid-based robots that approximate smooth manifolds using discrete segments, each contributing one degree of freedom. Their work provides forward and inverse kinematics for planar and spatial configurations, bridging hyper-redundant and continuum robotics. == Advantages == The particular design of continuum robots offers several advantages with respect to rigid-link robots. First of all, as already said, continuum robots can more easily operate in environments that require a high level of dexterity, adaptability and flexibility. Moreover, the simplicity of their structure makes continuum robots more prone to miniaturisation. The rise of continuum robots has also paved the way for the development of soft continuum manipulators. These continuum manipulators are made of highly compliant materials that are flexible and can adapt and deform according to the surrounding environment. The "softness" of their material grants higher safety in human-robot interactions. == Disadvantages == The particular design of continuum robots also introduces many challenges. To properly and safely use continuum robots, it is crucial to have an accurate force and shape sensing system. Traditionally, this is done using cameras that are not suitable for some of the applications of continuum robots (e.g. minimally invasive surgery), or using electromagnetic sensors that are however disturbed by the presence of magnetic objects in the environment. To solve this issue, in the last years fiber-Bragg-grating sensors have been proposed as a possible alternative and have shown promising results. It is also necessary to notice that while the mechanical properties of rigid-link robots are fully understood, the comprehension of the behaviour and properties of continuum robots is still subject of study and debate. This poses new challenges in developing accurate models and control algorithms for this kind of robots. == Modelling == Creating an accurate model that can predict the shape of a continuum robot allows to properly control the robot's shape. There are three main approaches to model continuum robots: Cosserat rod theory: this approach is an exact solution to the static of a continuum robot, as it is not subject to any assumption. It solves a set of equilibrium equations between position, orientation, internal force and torque of the robot. This method requires to be solved numerically and it is therefore computationally expensive, due to its high complexity. Constant curvature: this technique assumes the backbone to be made of a series of mutually tangent sections that can be approximated as arcs with constant curvature. This approach is also known as piecewise constant-curvature. This assumption can be applied to the entire segment of the backbone or to its subsegments. This model has shown promising results, however it must be taken into account that the segment/subsegments of the backbone may not comply to the constant curvature assumption and therefore the model's behaviour may not entirely reflect the behaviour of the robot. Rigid-link model: this approach is based on the assumption that the continuum robot can be divided in small segments with rigid links. This is a strong assumption, since if the number of segments is too low, the model hardly behaves like the continuum robot, while increasing the number of segments means increasing the number of variables, and thus complexity. Despite this limitation, rigid-link modelling allows the use of the standard control techniques that are well known for rigid-link robots. It has been proven that this model can be coupled with shape and force sensing to mitigate its inaccuracy and can lead to promising results. == Sensing == To develop accurate control algorithms, it is necessary to complement the presented modelling techniques with real time shape sensing. The following options are currently available: Electromagnetic (EM) sensing: shape is reconstructed thanks to the mutual induction between a magnetic field generator and a magnetic field sensor. The most common external EM tracking system is the commercially available NDI Aurora: small sensors can be placed on the robot and their position is tracked in an external generated magnetic field. The validity of this method has been extensively assessed, however its performance is hindered by the limited workspace, whose dimension depends on the magnetic field. Another alternative is to embed the sensors internally in the continuum robot, combining magnetic sensors with Hall effect sensors: the magnetic field is measured at the level of the Hall effect sensors in order to estimate the deflection of the robot. However, it has been noticed that the higher the bending of the manipulator, the higher is the estimation error, due to crosstalk between sensors and magnets. Optical sensing: fiber Bragg grating sensors incorporated in an optical fiber can be embedded into the backbone of the continuum robot to estimate its shape; these sensors can only reflect a small range of the input light spectrum depending on their strain; therefore, by measuring the strain on each sensor it is possible to obtain the shape of the robot. This type of sensor is however expensive and is more prone to breaking in case of excessive strain, and this can happen in robots that can perform high deflections. == Control strategies == The control strategies can be distinguished in static and dynamic; the first one is based on the steady-state assumption, while the latter also considers the dynamic behaviour of the continuum robot. We can also differentiate between model-based controllers, that depend on a model of the robot, and model-free, that learn the robot's behaviour from data. Model-based static controllers: they rely on one of the modelling approaches presented above; once the model is defined, the kinematics must be inverted to obtain the desired actuator or configuration space variables. There are several ways to do this, like differential inverse kinematics, direct inversion or optimization. Model-free static controllers: these approaches learn directly, via machine learning techniques (e.g. regression methods and neural networks), the inverse kinematic or the direct kinematic representation of the con
Read more →
Variable-order Bayesian network

Variable-order Bayesian network (VOBN) models provide an important extension of both the Bayesian network models and the variable-order Markov models. VOBN models are used in machine learning in general and have shown great potential in bioinformatics applications. These models extend the widely used position weight matrix (PWM) models, Markov models, and Bayesian network (BN) models. In contrast to the BN models, where each random variable depends on a fixed subset of random variables, in VOBN models these subsets may vary based on the specific realization of observed variables. The observed realizations are often called the context and, hence, VOBN models are also known as context-specific Bayesian networks. The flexibility in the definition of conditioning subsets of variables turns out to be a real advantage in classification and analysis applications, as the statistical dependencies between random variables in a sequence of variables (not necessarily adjacent) may be taken into account efficiently, and in a position-specific and context-specific manner.
Read more →
Types of artificial neural networks

Types of neural networks (NN) include a family of techniques. The simplest types have static components, including number of units, number of layers, unit weights and topology. Dynamic NNs evolve via learning. Some types allow/require learning to be "supervised" by the operator, while others operate independently. Some types operate purely in hardware, while others are purely software and run on general purpose computers. The main types are: Transformers: these use attention to analyze every token in the input stream against every other token in the stream. That technique has enabled neural networks to reach the general public via chatbots, code generators and many other forms. Convolutional neural networks (CNN): a FNN that uses kernels and regularization to evade problems in prior generations of NNs. They are typically used to analyze visual and other two-dimensional data. Generative adversarial networks set networks (of varying structure) against each other, each trying to push the other(s) to produce better results such as winning a game or to deceive the opponent about the authenticity of an input. == Feedforward == In feedforward neural networks the information moves from the input to output directly in every layer. There can be hidden layers with or without cycles/loops to sequence inputs. Feedforward networks can be constructed with various types of units, such as binary McCulloch–Pitts neurons, the simplest of which is the perceptron. Continuous neurons, frequently with sigmoidal activation, are used in the context of backpropagation. == Group method of data handling == The Group Method of Data Handling (GMDH) features fully automatic structural and parametric model optimization. The node activation functions are Kolmogorov–Gabor polynomials that permit additions and multiplications. It uses a deep multilayer perceptron with eight layers. It is a supervised learning network that grows layer by layer, where each layer is trained by regression analysis. Useless items are detected using a validation set, and pruned through regularization. The size and depth of the resulting network depends on the task. == Autoencoder == An autoencoder, autoassociator or Diabolo network is similar to the multilayer perceptron (MLP) – with an input layer, an output layer and one or more hidden layers connecting them. However, the output layer has the same number of units as the input layer. Its purpose is to reconstruct its own inputs (instead of emitting a target value). Therefore, autoencoders are unsupervised learning models. An autoencoder is used for unsupervised learning of efficient codings, typically for the purpose of dimensionality reduction and for learning generative models of data. == Probabilistic == A probabilistic neural network (PNN) is a four-layer feedforward neural network. The layers are Input, hidden pattern, hidden summation, and output. In the PNN algorithm, the parent probability distribution function (PDF) of each class is approximated by a Parzen window and a non-parametric function. Then, using PDF of each class, the class probability of a new input is estimated and Bayes’ rule is employed to allocate it to the class with the highest posterior probability. It was derived from the Bayesian network and a statistical algorithm called Kernel Fisher discriminant analysis. It is used for classification and pattern recognition. == Time delay == A time delay neural network (TDNN) is a feedforward architecture for sequential data that recognizes features independent of sequence position. In order to achieve time-shift invariance, delays are added to the input so that multiple data points (points in time) are analyzed together. It usually forms part of a larger pattern recognition system. It has been implemented using a perceptron network whose connection weights were trained with back propagation (supervised learning). == Convolutional == A convolutional neural network (CNN, or ConvNet or shift invariant or space invariant) is a class of deep network, composed of one or more convolutional layers with fully connected layers (matching those in typical ANNs) on top. It uses tied weights and pooling layers. In particular, max-pooling. It is often structured via Fukushima's convolutional architecture. They are variations of multilayer perceptrons that use minimal preprocessing. This architecture allows CNNs to take advantage of the 2D structure of input data. Its unit connectivity pattern is inspired by the organization of the visual cortex. Units respond to stimuli in a restricted region of space known as the receptive field. Receptive fields partially overlap, over-covering the entire visual field. Unit response can be approximated mathematically by a convolution operation. CNNs are suitable for processing visual and other two-dimensional data. They have shown superior results in both image and speech applications. They can be trained with standard backpropagation. CNNs are easier to train than other regular, deep, feed-forward neural networks and have many fewer parameters to estimate. Capsule Neural Networks (CapsNet) add structures called capsules to a CNN and reuse output from several capsules to form more stable (with respect to various perturbations) representations. Examples of applications in computer vision include DeepDream and robot navigation. They have wide applications in image and video recognition, recommender systems and natural language processing. == Deep stacking network == A deep stacking network (DSN) (deep convex network) is based on a hierarchy of blocks of simplified neural network modules. It was introduced in 2011 by Deng and Yu. It formulates the learning as a convex optimization problem with a closed-form solution, emphasizing the mechanism's similarity to stacked generalization. Each DSN block is a simple module that is easy to train by itself in a supervised fashion without backpropagation for the entire blocks. Each block consists of a simplified multi-layer perceptron (MLP) with a single hidden layer. The hidden layer h has logistic sigmoidal units, and the output layer has linear units. Connections between these layers are represented by weight matrix U; input-to-hidden-layer connections have weight matrix W. Target vectors t form the columns of matrix T, and the input data vectors x form the columns of matrix X. The matrix of hidden units is H = σ ( W T X ) {\displaystyle {\boldsymbol {H}}=\sigma ({\boldsymbol {W}}^{T}{\boldsymbol {X}})} . Modules are trained in order, so lower-layer weights W are known at each stage. The function performs the element-wise logistic sigmoid operation. Each block estimates the same final label class y, and its estimate is concatenated with original input X to form the expanded input for the next block. Thus, the input to the first block contains the original data only, while downstream blocks' input adds the output of preceding blocks. Then learning the upper-layer weight matrix U given other weights in the network can be formulated as a convex optimization problem: min U T f = ‖ U T H − T ‖ F 2 , {\displaystyle \min _{U^{T}}f=\|{\boldsymbol {U}}^{T}{\boldsymbol {H}}-{\boldsymbol {T}}\|_{F}^{2},} which has a closed-form solution. Unlike other deep architectures, such as DBNs, the goal is not to discover the transformed feature representation. The structure of the hierarchy of this kind of architecture makes parallel learning straightforward, as a batch-mode optimization problem. In purely discriminative tasks, DSNs outperform conventional DBNs. === Tensor deep stacking networks === This architecture is a DSN extension. It offers two important improvements: it uses higher-order information from covariance statistics, and it transforms the non-convex problem of a lower-layer to a convex sub-problem of an upper-layer. TDSNs use covariance statistics in a bilinear mapping from each of two distinct sets of hidden units in the same layer to predictions, via a third-order tensor. While parallelization and scalability are not considered seriously in conventional DNNs, all learning for DSNs and TDSNs is done in batch mode, to allow parallelization. Parallelization allows scaling the design to larger (deeper) architectures and data sets. The basic architecture is suitable for diverse tasks such as classification and regression. == Physics-informed == Such a neural network is designed for the numerical solution of mathematical equations, such as differential, integral, delay, fractional and others. As input parameters, PINN accepts variables (spatial, temporal, and others), transmits them through the network block. At the output, it produces an approximate solution and substitutes it into the mathematical model, considering the initial and boundary conditions. If the solution does not satisfy the required accuracy, one uses the backpropagation and rectify the solution. Besides PINN, other architectures have been developed to produce surrogate models for scientific comput
Read more →
Extremal Ensemble Learning

Extremal Ensemble Learning (EEL) is a machine learning algorithmic paradigm for graph partitioning. EEL creates an ensemble of partitions and then uses information contained in the ensemble to find new and improved partitions. The ensemble evolves and learns how to form improved partitions through extremal updating procedure. The final solution is found by achieving consensus among its member partitions about what the optimal partition is. == Reduced-Network Extremal Ensemble Learning (RenEEL) == A particular implementation of the EEL paradigm is the Reduced-Network Extremal Ensemble Learning (RenEEL) scheme for partitioning a graph. RenEEL uses consensus across many partitions in an ensemble to create a reduced network that can be efficiently analyzed to find more accurate partitions. These better quality partitions are subsequently used to update the ensemble. An algorithm that utilizes the RenEEL scheme is currently the best algorithm for finding the graph partition with maximum modularity, which is an NP-hard problem.
Read more →
AI agent

In the context of generative artificial intelligence, AI agents (also referred to as compound AI systems or agentic AI) are a class of intelligent agents that can pursue goals, use tools, and take actions with varying degrees of autonomy. In practice, they usually operate within human-defined objectives, constraints, and available tools. == Overview == AI agents possess several key attributes, including goal-directed behavior, natural language interfaces, the capacity to use external tools, and the ability to perform multi-step tasks. Their control flow is frequently driven by large language models (LLMs). Agent systems may also include memory components, planning logic, tool interfaces, and orchestration software for coordinating agent components. AI agents do not have a standard definition. NIST describes agentic AI as an emerging area requiring standards for secure operation, interoperability, and reliable interaction with external systems. A common application of AI agents is task automation: for example, booking travel plans based on a user's prompted request. Companies such as Google, Microsoft and Amazon Web Services have offered platforms for deploying pre-built AI agents. Several protocols have been proposed for standardizing inter-agent communication, with examples including the Model Context Protocol, Gibberlink, and many others. Some of these protocols are also used for connecting agents to external applications. In December 2025, Linux Foundation announced the formation of the Agentic AI Foundation (AAIF), with the goal of ensuring agentic AI evolves transparently and collaboratively. == History == AI agents have been traced back to research from the 1990s, with Harvard professor Milind Tambe noting that the definition of an AI agent was not clear at the time. Researcher Andrew Ng has been credited with spreading the term "agentic" to a wider audience in 2024. == Training and testing == Researchers have attempted to build world models and reinforcement learning environments to train or evaluate AI agents. For example, video games such as Minecraft and No Man's Sky as well as replicas of company websites, have also been used for training such agents. == Autonomous capabilities == The Financial Times compared the autonomy of AI agents to the SAE classification of self-driving cars, likening most applications to level 2 or level 3, with some achieving level 4 in highly specialized circumstances, and level 5 being theoretical. == Cognitive architecture == The following are some internal design options for reasoning within an agent: Retrieval-augmented generation ReAct (Reason + Act) pattern is an iterative process in which an AI agent alternates between reasoning and taking actions, receives observations from the environment or external tools, and integrates these observations into subsequent reasoning steps. Reflexion, which uses an LLM to create feedback on the agent's plan of action and stores that feedback in a memory cache. A tool/agent registry, for organizing software functions or other agents that the agent can use. One-shot model querying, which queries the model once to create the plan of action. === Reference architecture === Ken Huang proposed an AI agent reference architecture, which consists of seven interconnected layers, with each layer building on the functionality of the layers beneath it: Layer 1: Foundation models - provide the core AI engines to power agent capabilities. Layer 2: Data operations - manage the complex data infrastructure required for AI agent operations, including Vector database, data loaders, RAG. Layer 3: Agent frameworks - sophisticated software and tools that simplify the development and management of the AI agents. Layer 4: Deployment and infrastructure - provide the robust technical foundation for running AI agents. Layer 5: Evaluation and observability - focus on assessing the safety and performance of AI agents. Layer 6: Security and compliance - a crucial protective framework ensuring AI agents operate safely, securely, and conform to regulatory boundaries. At this layer security and compliance features embedded into all the AI agent stack layers are integrated together. Layer 7: Agent ecosystem - represents the AI agents' interface with real-world applications and users. == Orchestration patterns == To execute complex tasks, autonomous agents are often integrated with other agents or specialized tools. These configurations, known as orchestration patterns or workflows, include the following: Prompt chaining: A sequence where the output of one step serves as the input for the next. Routing: The classification of an input to direct it to a specialized downstream task or tool. Parallelization: The simultaneous execution of multiple tasks. Sequential processing: A fixed, linear progression of tasks through a predefined pipeline. Planner-critic: An iterative pattern where one agent generates a proposal and another evaluates it to provide feedback for refinement. == Multimodal AI agents == In addition to large language models (LLMs), vision-language models (VLMs) and multimodal foundation models can be used as the basis for agents. In September 2024, Allen Institute for AI released an open-source vision-language model. Nvidia released a framework for developers to use VLMs, LLMs and retrieval-augmented generation for building AI agents that can analyze images and videos, including video search and video summarization. Microsoft released a multimodal agent model – trained on images, video, software user interface interactions, and robotics data – that the company claimed can manipulate software and robots. == Applications == As of April 2025, per the Associated Press, there are few real-world applications of AI agents. As of June 2025, per Fortune, many companies are primarily experimenting with AI agents. The Information divided AI agents into seven archetypes: business-task agents, for acting within enterprise software; conversational agents, which act as chatbots for customer support; research agents, for querying and analyzing information (such as OpenAI Deep Research); analytics agents, for analyzing data to create reports; software developer or coding agents (such as Cursor); domain-specific agents, which include specific subject matter knowledge; and web browser agents (such as OpenAI Operator). By mid-2025, AI agents have been used in video game development, gambling (including sports betting), cryptocurrency wallets (including cryptocurrency trading and meme coins) and social media. In August 2025, New York Magazine described software development as the most definitive use case of AI agents. Likewise, by October 2025, noting a decline in expectations, The Information noted AI coding agents and customer support as the primary use cases by businesses. In November 2025, The Wall Street Journal reported that few companies that deployed AI agents have received a return on investment. === Applications in government === Several government bodies in the United States and United Kingdom have deployed or announced the deployment of agents, at the local and national level. The city of Kyle, Texas deployed an AI agent from Salesforce in March 2025 for 311 customer service. In November 2025, the Internal Revenue Service stated that it would use Agentforce, AI agents from Salesforce, for the Office of Chief Counsel, Taxpayer Advocate Services and the Office of Appeals. That same month, Staffordshire Police announced that they would trial Agentforce agents for handling non-emergency 101 calls in the United Kingdom starting in 2026. In December 2025, the Department of Neighborhoods in Detroit, Michigan, in partnership with a local business, deployed a pilot project in two Detroit districts for an AI agent to be used for customer service calls. In February 2025, Thomas Shedd, the director of the Technology Transformation Services, proposed using AI coding agents across the United States federal government. A recruiter for the Department of Government Efficiency proposed in April 2025 to use AI agents to automate the work of about 70,000 United States federal government employees, as part of a startup with funding from OpenAI and a partnership agreement with Palantir. This proposal was criticized by experts for its impracticality, if not impossibility, and the lack of corresponding widespread adoption by businesses. In December 2025, the Food and Drug Administration announced that it would offer "agentic AI capabilities" to its staff for "meeting management, pre-market reviews, review validation, post-market surveillance, inspections and compliance and administrative functions." That same month, the United States Department of Defense launched GenAI.mil, an internal platform for American military personnel to use generative AI-based applications based on Google Gemini, including "intelligent agentic workflows". Defense Secretary Pete Hegseth listed applications such as "[conducting] deep r
Read more →
Probit model

In statistics, a probit model is a type of regression where the dependent variable can take only two values, for example married or not married. The word is a portmanteau, coming from probability + unit. The purpose of the model is to estimate the probability that an observation with particular characteristics will fall into a specific one of the categories; moreover, classifying observations based on their predicted probabilities is a type of binary classification model. A probit model is a popular specification for a binary response model. As such it treats the same set of problems as does logistic regression using similar techniques. When viewed in the generalized linear model framework, the probit model employs a probit link function. It is most often estimated using the maximum likelihood procedure, such an estimation being called a probit regression. == Conceptual framework == Suppose a response variable Y is binary, that is it can have only two possible outcomes which we will denote as 1 and 0. For example, Y may represent presence/absence of a certain condition, success/failure of some device, answer yes/no on a survey, etc. We also have a vector of regressors X, which are assumed to influence the outcome Y. Specifically, we assume that the model takes the form P ( Y = 1 ∣ X ) = Φ ( X T β ) , {\displaystyle P(Y=1\mid X)=\Phi (X^{\operatorname {T} }\beta ),} where P is the probability and Φ {\displaystyle \Phi } is the cumulative distribution function (CDF) of the standard normal distribution. The parameters β are typically estimated by maximum likelihood. It is possible to motivate the probit model as a latent variable model. Suppose there exists an auxiliary random variable Y ∗ = X T β + ε , {\displaystyle Y^{\ast }=X^{T}\beta +\varepsilon ,} where ε ~ N(0, 1). Then Y can be viewed as an indicator for whether this latent variable is positive: Y = { 1 Y ∗ > 0 0 otherwise } = { 1 X T β + ε > 0 0 otherwise } {\displaystyle Y=\left.{\begin{cases}1&Y^{}>0\\0&{\text{otherwise}}\end{cases}}\right\}=\left.{\begin{cases}1&X^{\operatorname {T} }\beta +\varepsilon >0\\0&{\text{otherwise}}\end{cases}}\right\}} The use of the standard normal distribution causes no loss of generality compared with the use of a normal distribution with an arbitrary mean and standard deviation, because adding a fixed amount to the mean can be compensated by subtracting the same amount from the intercept, and multiplying the standard deviation by a fixed amount can be compensated by multiplying the weights by the same amount. To see that the two models are equivalent, note that P ( Y = 1 ∣ X ) = P ( Y ∗ > 0 ) = P ( X T β + ε > 0 ) = P ( ε > − X T β ) = P ( ε < X T β ) by symmetry of the normal distribution = Φ ( X T β ) {\displaystyle {\begin{aligned}P(Y=1\mid X)&=P(Y^{\ast }>0)\\&=P(X^{\operatorname {T} }\beta +\varepsilon >0)\\&=P(\varepsilon >-X^{\operatorname {T} }\beta )\\&=P(\varepsilon 0 {\displaystyle t,\lim _{n\rightarrow \infty }n_{t}/n=c_{t}>0} . Denote p ^ t = r t / n t {\displaystyle {\hat {p}}_{t}=r_{t}/n_{t}} σ ^ t 2 = 1 n t p ^ t ( 1 − p ^ t ) φ 2 ( Φ − 1 ( p ^ t ) ) {\displaystyle {\hat {\sigma }}_{t}^{2}={\frac {1}{n_{t}}}{\frac {{\hat {p}}_{t}(1-{\hat {p}}_{t})}{\varphi ^{2}{\big (}\Phi ^{-1}({\hat {p}}_{t}){\big )}}}} Then Berkson's minimum chi-square estimator is a generalized least squares estimator in a regression of Φ − 1 ( p ^ t ) {\displaystyle \Phi ^{-1}({\hat {p}}_{t})} on x ( t ) {\displaystyle x_{(t)}} with weights σ ^ t − 2 {\displaystyle {\hat {\sigma }}_{t}^{-2}} : β ^ = ( ∑ t = 1 T σ ^ t − 2 x ( t ) x ( t ) T ) − 1 ∑ t = 1 T σ ^ t − 2 x ( t ) Φ − 1 ( p ^ t ) {\displaystyle {\hat {\beta }}={\Bigg (}\sum _{t=1}^{T}{\hat {\sigma }}_{t}^{-2}x_{(t)}x_{(t)}^{\operatorname {T} }{\Bigg )}^{-1}\sum _{t=1}^{T}{\hat {\sigma }}_{t}^{-2}x_{(t)}\Phi ^{-1}({\hat {p}}_{t})} It can be shown that this estimator is consistent (as n→∞ and T fixed), asymptotically normal and efficient. Its advantage is the presence of a closed-form formula for the estimator. However, it is only meaningful to carry out this analysis when individual observations are not available, only their aggregated counts r t {\displaystyle r_{t}} , n t {\disp
Read more →
Apache Giraph

Apache Giraph is an Apache project to perform graph processing on big data. Giraph utilizes Apache Hadoop's MapReduce implementation to process graphs. Facebook used Giraph with some performance improvements to analyze one trillion edges using 200 machines in 4 minutes. Giraph is based on a paper published by Google about its own graph processing system called Pregel. It can be compared to other Big Graph processing libraries such as Cassovary. As of September 2023, it is no longer actively developed.
Read more →
Sufficient dimension reduction

In statistics, sufficient dimension reduction (SDR) is a paradigm for analyzing data that combines the ideas of dimension reduction with the concept of sufficiency. Dimension reduction has long been a primary goal of regression analysis. Given a response variable y and a p-dimensional predictor vector x {\displaystyle {\textbf {x}}} , regression analysis aims to study the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , the conditional distribution of y {\displaystyle y} given x {\displaystyle {\textbf {x}}} . A dimension reduction is a function R ( x ) {\displaystyle R({\textbf {x}})} that maps x {\displaystyle {\textbf {x}}} to a subset of R k {\displaystyle \mathbb {R} ^{k}} , k < p, thereby reducing the dimension of x {\displaystyle {\textbf {x}}} . For example, R ( x ) {\displaystyle R({\textbf {x}})} may be one or more linear combinations of x {\displaystyle {\textbf {x}}} . A dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} is said to be sufficient if the distribution of y ∣ R ( x ) {\displaystyle y\mid R({\textbf {x}})} is the same as that of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, no information about the regression is lost in reducing the dimension of x {\displaystyle {\textbf {x}}} if the reduction is sufficient. == Graphical motivation == In a regression setting, it is often useful to summarize the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} graphically. For instance, one may consider a scatterplot of y {\displaystyle y} versus one or more of the predictors or a linear combination of the predictors. A scatterplot that contains all available regression information is called a sufficient summary plot. When x {\displaystyle {\textbf {x}}} is high-dimensional, particularly when p ≥ 3 {\displaystyle p\geq 3} , it becomes increasingly challenging to construct and visually interpret sufficiency summary plots without reducing the data. Even three-dimensional scatter plots must be viewed via a computer program, and the third dimension can only be visualized by rotating the coordinate axes. However, if there exists a sufficient dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} with small enough dimension, a sufficient summary plot of y {\displaystyle y} versus R ( x ) {\displaystyle R({\textbf {x}})} may be constructed and visually interpreted with relative ease. Hence sufficient dimension reduction allows for graphical intuition about the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , which might not have otherwise been available for high-dimensional data. Most graphical methodology focuses primarily on dimension reduction involving linear combinations of x {\displaystyle {\textbf {x}}} . The rest of this article deals only with such reductions. == Dimension reduction subspace == Suppose R ( x ) = A T x {\displaystyle R({\textbf {x}})=A^{T}{\textbf {x}}} is a sufficient dimension reduction, where A {\displaystyle A} is a p × k {\displaystyle p\times k} matrix with rank k ≤ p {\displaystyle k\leq p} . Then the regression information for y ∣ x {\displaystyle y\mid {\textbf {x}}} can be inferred by studying the distribution of y ∣ A T x {\displaystyle y\mid A^{T}{\textbf {x}}} , and the plot of y {\displaystyle y} versus A T x {\displaystyle A^{T}{\textbf {x}}} is a sufficient summary plot. Without loss of generality, only the space spanned by the columns of A {\displaystyle A} need be considered. Let η {\displaystyle \eta } be a basis for the column space of A {\displaystyle A} , and let the space spanned by η {\displaystyle \eta } be denoted by S ( η ) {\displaystyle {\mathcal {S}}(\eta )} . It follows from the definition of a sufficient dimension reduction that F y ∣ x = F y ∣ η T x , {\displaystyle F_{y\mid x}=F_{y\mid \eta ^{T}x},} where F {\displaystyle F} denotes the appropriate distribution function. Another way to express this property is y ⊥ ⊥ x ∣ η T x , {\displaystyle y\perp \!\!\!\perp {\textbf {x}}\mid \eta ^{T}{\textbf {x}},} or y {\displaystyle y} is conditionally independent of x {\displaystyle {\textbf {x}}} , given η T x {\displaystyle \eta ^{T}{\textbf {x}}} . Then the subspace S ( η ) {\displaystyle {\mathcal {S}}(\eta )} is defined to be a dimension reduction subspace (DRS). === Structural dimensionality === For a regression y ∣ x {\displaystyle y\mid {\textbf {x}}} , the structural dimension, d {\displaystyle d} , is the smallest number of distinct linear combinations of x {\displaystyle {\textbf {x}}} necessary to preserve the conditional distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, the smallest dimension reduction that is still sufficient maps x {\displaystyle {\textbf {x}}} to a subset of R d {\displaystyle \mathbb {R} ^{d}} . The corresponding DRS will be d-dimensional. === Minimum dimension reduction subspace === A subspace S {\displaystyle {\mathcal {S}}} is said to be a minimum DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} if it is a DRS and its dimension is less than or equal to that of all other DRSs for y ∣ x {\displaystyle y\mid {\textbf {x}}} . A minimum DRS S {\displaystyle {\mathcal {S}}} is not necessarily unique, but its dimension is equal to the structural dimension d {\displaystyle d} of y ∣ x {\displaystyle y\mid {\textbf {x}}} , by definition. If S {\displaystyle {\mathcal {S}}} has basis η {\displaystyle \eta } and is a minimum DRS, then a plot of y versus η T x {\displaystyle \eta ^{T}{\textbf {x}}} is a minimal sufficient summary plot, and it is (d + 1)-dimensional. == Central subspace == If a subspace S {\displaystyle {\mathcal {S}}} is a DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} , and if S ⊂ S drs {\displaystyle {\mathcal {S}}\subset {\mathcal {S}}_{\text{drs}}} for all other DRSs S drs {\displaystyle {\mathcal {S}}_{\text{drs}}} , then it is a central dimension reduction subspace, or simply a central subspace, and it is denoted by S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . In other words, a central subspace for y ∣ x {\displaystyle y\mid {\textbf {x}}} exists if and only if the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} of all dimension reduction subspaces is also a dimension reduction subspace, and that intersection is the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . The central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does not necessarily exist because the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} is not necessarily a DRS. However, if S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does exist, then it is also the unique minimum dimension reduction subspace. === Existence of the central subspace === While the existence of the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} is not guaranteed in every regression situation, there are some rather broad conditions under which its existence follows directly. For example, consider the following proposition from Cook (1998): Let S 1 {\displaystyle {\mathcal {S}}_{1}} and S 2 {\displaystyle {\mathcal {S}}_{2}} be dimension reduction subspaces for y ∣ x {\displaystyle y\mid {\textbf {x}}} . If x {\displaystyle {\textbf {x}}} has density f ( a ) > 0 {\displaystyle f(a)>0} for all a ∈ Ω x {\displaystyle a\in \Omega _{x}} and f ( a ) = 0 {\displaystyle f(a)=0} everywhere else, where Ω x {\displaystyle \Omega _{x}} is convex, then the intersection S 1 ∩ S 2 {\displaystyle {\mathcal {S}}_{1}\cap {\mathcal {S}}_{2}} is also a dimension reduction subspace. It follows from this proposition that the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} exists for such x {\displaystyle {\textbf {x}}} . == Methods for dimension reduction == There are many existing methods for dimension reduction, both graphical and numeric. For example, sliced inverse regression (SIR) and sliced average variance estimation (SAVE) were introduced in the 1990s and continue to be widely used. Although SIR was originally designed to estimate an effective dimension reducing subspace, it is now understood that it estimates only the central subspace, which is generally different. More recent methods for dimension reduction include likelihood-based sufficient dimension reduction, estimating the central subspace based on the inverse third moment (or kth moment), estimating the central solution space, graphical regression, envelope model, and the principal support vector machine. For more details on these and other methods, consult the statistical literature. Principal components analysis (PCA) and similar methods for dimension reduction are not based on the sufficiency principle. === Example: linear regression === Consider the regression model y = α + β T x + ε , where ε ⊥ ⊥ x . {\displaystyle y=\alpha +\beta ^{T}{\textbf {x}}+\varepsilon ,{\text{ where }}\varepsilon \perp \!\!\!\perp {\textbf {x}}.} Note that the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} is the same as the distribution of y ∣ β T x {\displ
Read more →
Vero (app)

Vero (stylized as VERO) is a social media platform and mobile app company. Vero markets itself as a social network free from advertisements, data mining and algorithms. == History == The app was founded by French-Lebanese billionaire Ayman Hariri who is the son of former Lebanese prime minister Rafic Hariri. The name is taken from the Italian word for true. The app launched officially in 2015 as an alternative to Facebook and their popular photo-blogging app Instagram. Within weeks of its release the app surged in popularity although users expressed mixed reports with some feeling confused about how the app worked. Cosplayers were early to adopt the app as their photo-sharing platform of choice, favouring the app's pinch and zoom magnification feature over Instagram's zoom feature. Other creative communities soon followed, and the app became popular with niche groups of makeup artists, tattoo artists, and skateboarders. In March 2018, Vero's popularity surged, partly helped by an exodus from Facebook and Instagram following the Cambridge Analytica data scandal. In the wake of the scandal, Vero devised an advertising campaign aimed at defected Facebook and Instagram users, hoping the app's policies and privacy settings would assuage concerns over sharing personal information on the internet. Within the space of one week, the app went from being a small service, akin to Ello or Peach, to being the most downloaded app in eighteen countries. In December 2020, Vero released its most significant update to date, Vero 2.0 which introduced new features including voice and video calls, game and app posts and bookmarks, and refinements to the UI. In October 2021, Vero introduced their Desktop app (beta) with multiple post options and a re-sizable multi-column feed. == Concept and funding == Vero's content feed resembles Instagram's although users can share a wider variety of content and the app has a chronological content feed whereas Facebook and Instagram's feeds are algorithm based. Vero's business plan is also distinct from similar social media apps. Whereas its competitors such as Facebook or Instagram make money from in-app advertising revenue and the sale of user data, Vero's business plan was to invite the first one million users to use the app for free then charge any subsequent users a subscription fee. The app was entirely funded by its founder and generated additional revenues by charging affiliate fees when someone buys a product they find on Vero. == Awards == Vero was recognized at the 2021 Webbys, being named as an Honoree in the Best Visual Design - Aesthetic Category. == Controversies == === Privacy === Vero has faced some criticism over the wording of their manifesto, in particular, the statement "Vero only collects the data we believe is necessary to provide users with a great experience and to ensure the security of their accounts." Because this policy does not explicitly state that the app will not sell data on to third parties some users fear that the need to monetise the app through data might prove too tempting. Users have also complained about not being able to delete their accounts. While this was never the case, the option was hidden deep in the app's settings. === Russian involvement === Although Vero remains transparent about the app's Russian development team, they have been caught up in concerns about Russian interference on social media platforms. The app's founder Ayman Hariri was quick to dismiss the remarks as xenophobic and defend the nationality of his employees, stating in an interview with Time Magazine; "At the end of the day, where people are from is really not how anybody should judge anyone". === Criticism of the app's founder === Until 2013, Vero's founder Ayman Harari was deputy CEO and chairman of Saudi Oger, the Saudi Arabian construction company which collapsed in 2017, mired by controversies over the welfare and treatment of their employees. However, Hariri is quick to point out that he divested from the firm in 2014 and the worker's rights violations occurred after he had left the company.
Read more →
Minimum Population Search

In evolutionary computation, Minimum Population Search (MPS) is a computational method that optimizes a problem by iteratively trying to improve a set of candidate solutions with regard to a given measure of quality. It solves a problem by evolving a small population of candidate solutions by means of relatively simple arithmetical operations. MPS is a metaheuristic as it makes few or no assumptions about the problem being optimized and can search very large spaces of candidate solutions. For problems where finding the precise global optimum is less important than finding an acceptable local optimum in a fixed amount of time, using a metaheuristic such as MPS may be preferable to alternatives such as brute-force search or gradient descent. MPS is used for multidimensional real-valued functions but does not use the gradient of the problem being optimized, which means MPS does not require for the optimization problem to be differentiable as is required by classic optimization methods such as gradient descent and quasi-newton methods. MPS can therefore also be used on optimization problems that are not even continuous, are noisy, change over time, etc. == Background == In a similar way to Differential evolution, MPS uses difference vectors between the members of the population in order to generate new solutions. It attempts to provide an efficient use of function evaluations by maintaining a small population size. If the population size is smaller than the dimensionality of the search space, then the solutions generated through difference vectors will be constrained to the n − 1 {\displaystyle n-1} dimensional hyperplane. A smaller population size will lead to a more restricted subspace. With a population size equal to the dimensionality of the problem ( n = d ) {\displaystyle (n=d)} , the “line/hyperplane points” in MPS will be generated within a d − 1 {\displaystyle d-1} dimensional hyperplane. Taking a step orthogonal to this hyperplane will allow the search process to cover all the dimensions of the search space. Population size is a fundamental parameter in the performance of population-based heuristics. Larger populations promote exploration, but they also allow fewer generations, and this can reduce the chance of convergence. Searching with a small population can increase the chances of convergence and the efficient use of function evaluations, but it can also induce the risk of premature convergence. If the risk of premature convergence can be avoided, then a population-based heuristic could benefit from the efficiency and faster convergence rate of a smaller population. To avoid premature convergence, it is important to have a diversified population. By including techniques for explicitly increasing diversity and exploration, it is possible to have smaller populations with less risk of premature convergence. === Thresheld Convergence === Thresheld Convergence (TC) is a diversification technique which attempts to separate the processes of exploration and exploitation. TC uses a “threshold” function to establish a minimum search step, and managing this step makes it possible to influence the transition from exploration to exploitation, convergence is thus “held” back until the last stages of the search process. The goal of a controlled transition is to avoid an early concentration of the population around a few search regions and avoid the loss of diversity which can cause premature convergence. Thresheld Convergence has been successfully applied to several population-based metaheuristics such as Particle Swarm Optimization, Differential evolution, Evolution strategies, Simulated annealing and Estimation of Distribution Algorithms. The ideal case for Thresheld Convergence is to have one sample solution from each attraction basin, and for each sample solution to have the same relative fitness with respect to its local optimum. Enforcing a minimum step aims to achieve this ideal case. In MPS Thresheld Convergence is specifically used to preserve diversity and avoid premature convergence by establishing a minimum search step. By disallowing new solutions which are too close to members of the current population, TC forces a strong exploration during the early stages of the search while preserving the diversity of the (small) population. == Algorithm == A basic variant of the MPS algorithm works by having a population of size equal to the dimension of the problem. New solutions are generated by exploring the hyperplane defined by the current solutions (by means of difference vectors) and performing an additional orthogonal step in order to avoid getting caught in this hyperplane. The step sizes are controlled by the Thresheld Convergence technique, which gradually reduces step sizes as the search process advances. An outline for the algorithm is given below: Generate the first initial population. Allowing these solutions to lie near the bounds of the search space generally gives good results: s k = ( r s 1 ∗ b o u n d 1 / 2 , r s 2 ∗ b o u n d 2 / 2 , . . . , r s n ∗ b o u n d n / 2 ) {\displaystyle s_{k}=(rs_{1}bound_{1}/2,rs_{2}bound_{2}/2,...,rs_{n}bound_{n}/2)} where s k {\displaystyle s_{k}} is the k {\displaystyle k} -th population member, r s i {\displaystyle rs_{i}} are random numbers which can be −1 or 1, and the b o u n d i {\displaystyle bound_{i}} are the lower and upper bounds on each dimension. While a stop condition is not reached: Update threshold convergence values ( m i n _ s t e p {\displaystyle min\_step} and m a x _ s t e p {\displaystyle max\_step} ) Calculate the centroid of the current population ( x c {\displaystyle x_{c}} ) For each member of the population ( x i {\displaystyle x_{i}} ), generate a new offspring as follows: Uniformly generate a scaling factor ( F i {\displaystyle F_{i}} ) between − m a x _ s t e p {\displaystyle -max\_step} and m a x _ s t e p {\displaystyle max\_step} Generate a vector ( x o {\displaystyle x_{o}} ) orthogonal to the difference vector between x i {\displaystyle x_{i}} and x c {\displaystyle x_{c}} Calculate a scaling factor for the orthogonal vector: m i n _ o r t h = s q r t ( m a x ( m i n _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle min\_orth=sqrt(max(min\_step^{2}-F_{i}^{2},0))} m a x _ o r t h = s q r t ( m a x ( m a x _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle max\_orth=sqrt(max(max\_step^{2}-F_{i}^{2},0))} o r t h _ s t e p = u n i f o r m ( m i n _ o r t h , m a x _ o r t h ) {\displaystyle orth\_step=uniform(min\_orth,max\_orth)} Generate the new solution by adding the difference and the orthogonal vectors to the original solution n e w _ s o l u t i o n = x i + F i ∗ ( x i − x c ) ∗ o r t h _ s t e p ∗ x o {\displaystyle new\_solution=x_{i}+F_{i}(x_{i}-x_{c})orth\_stepx_{o}} Pick the best members between the old population and the new one by discarding the least fit members. Return the single best solution or the best population found as the final result.
Read more →
Dendrogram

A dendrogram is a diagram representing a tree graph. This diagrammatic representation is frequently used in different contexts: in hierarchical clustering, it illustrates the arrangement of the clusters produced by the corresponding analyses. in computational biology, it shows the clustering of genes or samples, sometimes in the margins of heatmaps. in phylogenetics, it displays the evolutionary relationships among various biological taxa. In this case, the dendrogram is also called a phylogenetic tree. The name dendrogram derives from the two ancient greek words δένδρον (déndron), meaning "tree", and γράμμα (grámma), meaning "drawing, mathematical figure". == Clustering example == For a clustering example, suppose that five taxa ( a {\displaystyle a} to e {\displaystyle e} ) have been clustered by UPGMA based on a matrix of genetic distances. The hierarchical clustering dendrogram would show a column of five nodes representing the initial data (here individual taxa), and the remaining nodes represent the clusters to which the data belong, with the arrows representing the distance (dissimilarity). The distance between merged clusters is monotone, increasing with the level of the merger: the height of each node in the plot is proportional to the value of the intergroup dissimilarity between its two daughters (the nodes on the right representing individual observations all plotted at zero height).
Read more →