AI Detector Reddit

AI Detector Reddit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • The AI Con

    The AI Con

    The AI Con: How to Fight Big Tech's Hype and Create the Future We Want is a 2025 non-fiction book by linguist Emily M. Bender and sociologist Alex Hanna. It argues that much of what is labeled "artificial intelligence" is a misleading term that obscures ordinary automation while concentrating power in a small number of technology firms. The book was published in May 2025 by Harper in the United States and Bodley Head in the United Kingdom. It was developed alongside the authors' long-running podcast Mystery AI Hype Theater 3000, which critiques exaggerated claims about AI. == Synopsis == The authors present AI as a marketing umbrella that encourages audiences to infer understanding and agency where none exist. They argue readers should treat such language skeptically and to separate specific automated tasks from broad claims of intelligence. The book describes a recurring hype cycle in which corporate narratives justify data and labor extraction, the replacement of human services with cheaper substitutes, and the diversion of attention from present harms to speculative futures. While acknowledging limited uses such as pattern recognition, the authors argue that contemporary systems are best understood as text and media generators shaped by training data and human labor, not as thinking or reasoning entities. A central theme is the social and environmental cost of scaling these systems, including increased energy and water use, the appropriation of creative work for training, and the outsourcing of ghost work to low-paid data workers worldwide. These costs are linked to workplace effects, with the authors arguing that automation rarely eliminates jobs outright and more often degrades them through surveillance, work intensification, and unpaid oversight. As alternatives to passive adoption, the authors propose concrete responses: asking precise questions about what is being automated and why, demanding transparency about data and evaluation, and practicing what they call strategic refusal when deployment conflicts with evidence or values. The book also develops a vocabulary for public debate, rejecting both boosterish and doomerish narratives as grounded in the same assumption that AI is a singular, autonomous force. The authors recommend reading strategies such as favoring trusted human sources over automated summaries and using humor to deflate inflated claims. They describe a link between language to policy and power, arguing that precise terminology can help policymakers and the public resist austerity-driven automation and demand accountability for errors and harms. == Reception == The Guardian praised the book's myth-busting approach and its analysis of how hype erodes cultural and civic life by normalizing synthetic media as a substitute for human judgment. Kirkus Reviews described it as a contrarian account that catalogs concrete risks while cutting through speculative predictions. An interview in Business Insider highlighted the authors' accessible frameworks, including their proposal to describe chatbots as conversation simulators and to evaluate systems in terms of values, labor, and evidence. Coverage in GeekWire emphasized the book's call for resistance through collective bargaining, stronger data rights, and a norm of rejecting deployments that fail basic standards of necessity and evaluation. Some reviews were more critical. A review in LLRX argued that the book's tone could be overly polemical and that it gave limited attention to potential benefits claimed for generative systems. Coverage in the Financial Times, focused on Bender's broader public scholarship, situated the book within her long-standing critique of anthropomorphic narratives about large language models and her advocacy for more democratic oversight of automated systems.

    Read more →
  • Targeted maximum likelihood estimation

    Targeted maximum likelihood estimation

    Targeted Maximum Likelihood Estimation (TMLE) (also more accurately referred to as Targeted Minimum Loss-Based Estimation) is a general statistical estimation framework for causal inference and semiparametric models. TMLE combines ideas from maximum likelihood estimation, semiparametric efficiency theory, and machine learning. It was introduced by Mark J. van der Laan and colleagues in the mid-2000s as a method that yields asymptotically efficient plug-in estimators while allowing the use of flexible, data-adaptive algorithms such as ensemble machine learning for nuisance parameter estimation. TMLE is used in epidemiology, biostatistics, and the social sciences to estimate causal effects in observational and experimental studies. Applications of TMLE include Longitudinal TMLE (LTMLE) for time-varying treatments and confounders. Variations in how the targeting step in TMLE is carried out have resulted in various versions of TMLE such as Collaborative TMLE (CTMLE) and Adaptive TMLE for improved finite-sample performance and automated variable selection. == History == The TMLE framework was first described by van der Laan and Rubin (2006) as a general approach for the construction of efficient plug-in estimators of smooth features of the data density. It was demonstrated in the context of causal inference and missing data problems. It was developed to address limitations of traditional doubly robust methods, such as Augmented Inverse Probability Weighting (AIPW), by respecting the plug-in principle in the sense that it respects that the target parameter is a function of the data density that is an element of the statistical model. TMLE estimates the data density or relevant parts of it with machine learning and targets these machine learning fits before it is plugged in the target parameter mapping. In this manner, a TMLE always respects global knowledge and satisfies known bounds such as that the target parameter is a probability . Since its introduction, TMLE has been developed in a series of theoretical and applied papers, culminating in book-length treatments of the method and its applications to survival analysis, adaptive designs, and longitudinal data. == Methodology == At its core, TMLE is a two-step estimation procedure: Initial estimation: Machine learning methods (such as the Super Learner ensemble) are used to obtain flexible estimates of nuisance parameters, such as outcome regressions and propensity scores. Targeting step: The initial estimate is updated by solving a score equation (the efficient influence function) so that the final estimator is consistent, asymptotically normal, and efficient under mild regularity conditions. The targeted machine learning fit is then mapped into the corresponding estimator of the target parameter by simply plugging it in the target parameter mapping. This approach balances the bias–variance trade-off by combining data-adaptive estimation with semiparametric efficiency theory. TMLE is doubly robust, meaning it remains consistent if either the outcome model or the treatment model is consistently estimated. === Formula === Here we explain the TMLE of the average treatment effect of a binary treatment on an outcome adjusting for baseline covariates. Consider i.i.d. observations O i = ( W i , A i , Y i ) {\displaystyle O_{i}=(W_{i},A_{i},Y_{i})} from a distribution P 0 {\displaystyle P_{0}} , where W {\displaystyle W} are baseline covariates, A {\displaystyle A} is a binary treatment, and Y {\displaystyle Y} is an outcome. Let Q ¯ ( a , w ) = E [ Y ∣ A = a , W = w ] {\displaystyle {\bar {Q}}(a,w)=\mathbb {E} [Y\mid A=a,W=w]} represent the outcome model and g ( a ∣ w ) = P ( A = a ∣ W = w ) {\displaystyle g(a\mid w)=P(A=a\mid W=w)} represent the propensity score. The average treatment effect (ATE) is given by ψ 0 = E { Q ¯ ( 1 , W ) − Q ¯ ( 0 , W ) } . {\displaystyle \psi _{0}=\mathbb {E} \{{\bar {Q}}(1,W)-{\bar {Q}}(0,W)\}.} A basic TMLE for the ATE proceeds as follows: Step 1: Estimate initial models. Obtain estimates Q ¯ ^ ( a , w ) {\displaystyle {\hat {\bar {Q}}}(a,w)} and g ^ ( a ∣ w ) {\displaystyle {\hat {g}}(a\mid w)} , often using flexible methods such as Super Learner. Step 2: Compute the clever covariate. Define: H ( A , W ) = A g ^ ( 1 ∣ W ) − 1 − A g ^ ( 0 ∣ W ) . {\displaystyle H(A,W)={\frac {A}{{\hat {g}}(1\mid W)}}-{\frac {1-A}{{\hat {g}}(0\mid W)}}.} Step 3: Estimate the fluctuation parameter. Fit a logistic regression of Y {\displaystyle Y} on H ( A , W ) {\displaystyle H(A,W)} with logit ⁡ ( Q ¯ ^ ( A , W ) ) {\displaystyle \operatorname {logit} ({\hat {\bar {Q}}}(A,W))} as offset. This yields ε ^ {\displaystyle {\hat {\varepsilon }}} , the MLE that solves the score equation: 1 n ∑ i = 1 n H ( A i , W i ) { Y i − Q ¯ ^ ε ( A i , W i ) } = 0. {\displaystyle {\frac {1}{n}}\sum _{i=1}^{n}H(A_{i},W_{i}){\big \{}Y_{i}-{\hat {\bar {Q}}}^{\varepsilon }(A_{i},W_{i}){\big \}}=0.} Step 4: Update the initial estimate. Apply the "blip" to obtain the targeted estimate: Q ¯ ^ ∗ ( A , W ) = expit ⁡ ( logit ⁡ ( Q ¯ ^ ( A , W ) ) + ε ^ H ( A , W ) ) . {\displaystyle {\hat {\bar {Q}}}^{}(A,W)=\operatorname {expit} {\Big (}\operatorname {logit} {\big (}{\hat {\bar {Q}}}(A,W){\big )}+{\hat {\varepsilon }}\,H(A,W){\Big )}.} Step 5: Compute the TMLE. The ATE estimate is: ψ ^ TMLE = 1 n ∑ i = 1 n [ Q ¯ ^ ∗ ( 1 , W i ) − Q ¯ ^ ∗ ( 0 , W i ) ] . {\displaystyle {\hat {\psi }}_{\text{TMLE}}={\frac {1}{n}}\sum _{i=1}^{n}{\big [}{\hat {\bar {Q}}}^{}(1,W_{i})-{\hat {\bar {Q}}}^{}(0,W_{i}){\big ]}.} Inference. The efficient influence function (EIF) for the ATE is: D ∗ ( O ) = H ( A , W ) { Y − Q ¯ ∗ ( A , W ) } + Q ¯ ∗ ( 1 , W ) − Q ¯ ∗ ( 0 , W ) − ψ . {\displaystyle D^{}(O)=H(A,W)\{Y-{\bar {Q}}^{}(A,W)\}+{\bar {Q}}^{}(1,W)-{\bar {Q}}^{}(0,W)-\psi .} The variance is estimated by σ ^ 2 = n − 1 ∑ i = 1 n ( D ∗ ( O i ) ) 2 {\displaystyle {\hat {\sigma }}^{2}=n^{-1}\sum _{i=1}^{n}{\big (}D^{}(O_{i}){\big )}^{2}} , yielding Wald-type confidence intervals ψ ^ TMLE ± z 1 − α / 2 σ ^ / n {\displaystyle {\hat {\psi }}_{\text{TMLE}}\pm z_{1-\alpha /2}\,{\hat {\sigma }}/{\sqrt {n}}} . Remark. For continuous outcomes, a linear fluctuation Q ¯ ^ ∗ = Q ¯ ^ + ε ^ H {\displaystyle {\hat {\bar {Q}}}^{}={\hat {\bar {Q}}}+{\hat {\varepsilon }}\,H} may be used instead. For bounded continuous outcomes, the logistic fluctuation (after rescaling Y {\displaystyle Y} to [ 0 , 1 ] {\displaystyle [0,1]} ) is often preferred for improved finite-sample performance. == Applications == TMLE has been applied in: Epidemiology: Estimating causal effects of exposures and interventions in observational cohort studies. Clinical trials and real-world evidence: The Targeted Learning roadmap provides a structured framework for generating and validating real-world evidence (RWE), bridging randomized trials and observational data using TMLE and related estimation techniques. This approach enables transparency, sensitivity analysis, and stronger causal inference for regulatory and clinical trial contexts. High-dimensional settings: Integration with ensemble methods for causal effect estimation. TMLE has been successfully applied in pharmacoepidemiology where a large number of covariates are automatically selected to adjust for confounding. In a study of post–myocardial infarction statin use and 1-year mortality, TMLE demonstrated robust performance relative to inverse probability weighting in scenarios with hundreds of potential confounders. == Derivatives and extensions == Longitudinal TMLE (LTMLE): A methodological extension of TMLE for longitudinal data with time-varying treatments, confounders, and censoring. It allows the estimation of dynamic treatment regimes and intervention-specific causal effects over time. This framework was originally introduced by van der Laan & Gruber (2012). Collaborative TMLE (CTMLE): Enhances finite-sample performance and variable selection by collaboratively fitting the treatment mechanism in conjunction with the target parameter. == Software == Several R packages implement TMLE and related methods: tmle: Functions for binary, categorical, and continuous outcomes. ltmle: Implementation for longitudinal data with time-varying treatments and outcomes. ctmle: Algorithms for collaborative TMLE and adaptive variable selection. SuperLearner: A theoretically grounded, cross-validated ensemble learning method that combines predictions from multiple algorithms to minimize predictive risk. Widely used in TMLE for estimating nuisance parameters. The original implementation is available as the R package SuperLearner. Recent machine learning platforms like H2O AutoML implement similar ensemble strategies, combining diverse learners in parallel and leveraging stacking and blending techniques, effectively functioning as a large-scale Super Learner.

    Read more →
  • Growth function

    Growth function

    The growth function, also called the shatter coefficient or the shattering number, measures the richness of a set family or class of functions. It is especially used in the context of statistical learning theory, where it is used to study properties of statistical learning methods. The term 'growth function' was coined by Vapnik and Chervonenkis in their 1968 paper, where they also proved many of its properties. It is a basic concept in machine learning. == Definitions == === Set-family definition === Let H {\displaystyle H} be a set family (a set of sets) and C {\displaystyle C} a set. Their intersection is defined as the following set-family: H ∩ C := { h ∩ C ∣ h ∈ H } {\displaystyle H\cap C:=\{h\cap C\mid h\in H\}} The intersection-size (also called the index) of H {\displaystyle H} with respect to C {\displaystyle C} is | H ∩ C | {\displaystyle |H\cap C|} . If a set C m {\displaystyle C_{m}} has m {\displaystyle m} elements then the index is at most 2 m {\displaystyle 2^{m}} . If the index is exactly 2m then the set C {\displaystyle C} is said to be shattered by H {\displaystyle H} , because H ∩ C {\displaystyle H\cap C} contains all the subsets of C {\displaystyle C} , i.e.: | H ∩ C | = 2 | C | , {\displaystyle |H\cap C|=2^{|C|},} The growth function measures the size of H ∩ C {\displaystyle H\cap C} as a function of | C | {\displaystyle |C|} . Formally: Growth ⁡ ( H , m ) := max C : | C | = m | H ∩ C | {\displaystyle \operatorname {Growth} (H,m):=\max _{C:|C|=m}|H\cap C|} === Hypothesis-class definition === Equivalently, let H {\displaystyle H} be a hypothesis-class (a set of binary functions) and C {\displaystyle C} a set with m {\displaystyle m} elements. The restriction of H {\displaystyle H} to C {\displaystyle C} is the set of binary functions on C {\displaystyle C} that can be derived from H {\displaystyle H} : H C := { ( h ( x 1 ) , … , h ( x m ) ) ∣ h ∈ H , x i ∈ C } {\displaystyle H_{C}:=\{(h(x_{1}),\ldots ,h(x_{m}))\mid h\in H,x_{i}\in C\}} The growth function measures the size of H C {\displaystyle H_{C}} as a function of | C | {\displaystyle |C|} : Growth ⁡ ( H , m ) := max C : | C | = m | H C | {\displaystyle \operatorname {Growth} (H,m):=\max _{C:|C|=m}|H_{C}|} == Examples == 1. The domain is the real line R {\displaystyle \mathbb {R} } . The set-family H {\displaystyle H} contains all the half-lines (rays) from a given number to positive infinity, i.e., all sets of the form { x > x 0 ∣ x ∈ R } {\displaystyle \{x>x_{0}\mid x\in \mathbb {R} \}} for some x 0 ∈ R {\displaystyle x_{0}\in \mathbb {R} } . For any set C {\displaystyle C} of m {\displaystyle m} real numbers, the intersection H ∩ C {\displaystyle H\cap C} contains m + 1 {\displaystyle m+1} sets: the empty set, the set containing the largest element of C {\displaystyle C} , the set containing the two largest elements of C {\displaystyle C} , and so on. Therefore: Growth ⁡ ( H , m ) = m + 1 {\displaystyle \operatorname {Growth} (H,m)=m+1} . The same is true whether H {\displaystyle H} contains open half-lines, closed half-lines, or both. 2. The domain is the segment [ 0 , 1 ] {\displaystyle [0,1]} . The set-family H {\displaystyle H} contains all the open sets. For any finite set C {\displaystyle C} of m {\displaystyle m} real numbers, the intersection H ∩ C {\displaystyle H\cap C} contains all possible subsets of C {\displaystyle C} . There are 2 m {\displaystyle 2^{m}} such subsets, so Growth ⁡ ( H , m ) = 2 m {\displaystyle \operatorname {Growth} (H,m)=2^{m}} . 3. The domain is the Euclidean space R n {\displaystyle \mathbb {R} ^{n}} . The set-family H {\displaystyle H} contains all the half-spaces of the form: x ⋅ ϕ ≥ 1 {\displaystyle x\cdot \phi \geq 1} , where ϕ {\displaystyle \phi } is a fixed vector. Then Growth ⁡ ( H , m ) = Comp ⁡ ( n , m ) {\displaystyle \operatorname {Growth} (H,m)=\operatorname {Comp} (n,m)} , where Comp is the number of components in a partitioning of an n-dimensional space by m hyperplanes. 4. The domain is the real line R {\displaystyle \mathbb {R} } . The set-family H {\displaystyle H} contains all the real intervals, i.e., all sets of the form { x ∈ [ x 0 , x 1 ] | x ∈ R } {\displaystyle \{x\in [x_{0},x_{1}]|x\in \mathbb {R} \}} for some x 0 , x 1 ∈ R {\displaystyle x_{0},x_{1}\in \mathbb {R} } . For any set C {\displaystyle C} of m {\displaystyle m} real numbers, the intersection H ∩ C {\displaystyle H\cap C} contains all runs of between 0 and m {\displaystyle m} consecutive elements of C {\displaystyle C} . The number of such runs is ( m + 1 2 ) + 1 {\displaystyle {m+1 \choose 2}+1} , so Growth ⁡ ( H , m ) = ( m + 1 2 ) + 1 {\displaystyle \operatorname {Growth} (H,m)={m+1 \choose 2}+1} . == Polynomial or exponential == The main property that makes the growth function interesting is that it can be either polynomial or exponential - nothing in-between. The following is a property of the intersection-size: If, for some set C m {\displaystyle C_{m}} of size m {\displaystyle m} , and for some number n ≤ m {\displaystyle n\leq m} , | H ∩ C m | ≥ Comp ⁡ ( n , m ) {\displaystyle |H\cap C_{m}|\geq \operatorname {Comp} (n,m)} - then, there exists a subset C n ⊆ C m {\displaystyle C_{n}\subseteq C_{m}} of size n {\displaystyle n} such that | H ∩ C n | = 2 n {\displaystyle |H\cap C_{n}|=2^{n}} . This implies the following property of the Growth function. For every family H {\displaystyle H} there are two cases: The exponential case: Growth ⁡ ( H , m ) = 2 m {\displaystyle \operatorname {Growth} (H,m)=2^{m}} identically. The polynomial case: Growth ⁡ ( H , m ) {\displaystyle \operatorname {Growth} (H,m)} is majorized by Comp ⁡ ( n , m ) ≤ m n + 1 {\displaystyle \operatorname {Comp} (n,m)\leq m^{n}+1} , where n {\displaystyle n} is the smallest integer for which Growth ⁡ ( H , n ) < 2 n {\displaystyle \operatorname {Growth} (H,n)<2^{n}} . == Other properties == === Trivial upper bound === For any finite H {\displaystyle H} : Growth ⁡ ( H , m ) ≤ | H | {\displaystyle \operatorname {Growth} (H,m)\leq |H|} since for every C {\displaystyle C} , the number of elements in H ∩ C {\displaystyle H\cap C} is at most | H | {\displaystyle |H|} . Therefore, the growth function is mainly interesting when H {\displaystyle H} is infinite. === Exponential upper bound === For any nonempty H {\displaystyle H} : Growth ⁡ ( H , m ) ≤ 2 m {\displaystyle \operatorname {Growth} (H,m)\leq 2^{m}} I.e, the growth function has an exponential upper-bound. We say that a set-family H {\displaystyle H} shatters a set C {\displaystyle C} if their intersection contains all possible subsets of C {\displaystyle C} , i.e. H ∩ C = 2 C {\displaystyle H\cap C=2^{C}} . If H {\displaystyle H} shatters C {\displaystyle C} of size m {\displaystyle m} , then Growth ⁡ ( H , C ) = 2 m {\displaystyle \operatorname {Growth} (H,C)=2^{m}} , which is the upper bound. === Cartesian intersection === Define the Cartesian intersection of two set-families as: H 1 ⨂ H 2 := { h 1 ∩ h 2 ∣ h 1 ∈ H 1 , h 2 ∈ H 2 } {\displaystyle H_{1}\bigotimes H_{2}:=\{h_{1}\cap h_{2}\mid h_{1}\in H_{1},h_{2}\in H_{2}\}} . Then: Growth ⁡ ( H 1 ⨂ H 2 , m ) ≤ Growth ⁡ ( H 1 , m ) ⋅ Growth ⁡ ( H 2 , m ) {\displaystyle \operatorname {Growth} (H_{1}\bigotimes H_{2},m)\leq \operatorname {Growth} (H_{1},m)\cdot \operatorname {Growth} (H_{2},m)} === Union === For every two set-families: Growth ⁡ ( H 1 ∪ H 2 , m ) ≤ Growth ⁡ ( H 1 , m ) + Growth ⁡ ( H 2 , m ) {\displaystyle \operatorname {Growth} (H_{1}\cup H_{2},m)\leq \operatorname {Growth} (H_{1},m)+\operatorname {Growth} (H_{2},m)} === VC dimension === The VC dimension of H {\displaystyle H} is defined according to these two cases: In the polynomial case, VCDim ⁡ ( H ) = n − 1 {\displaystyle \operatorname {VCDim} (H)=n-1} = the largest integer d {\displaystyle d} for which Growth ⁡ ( H , d ) = 2 d {\displaystyle \operatorname {Growth} (H,d)=2^{d}} . In the exponential case VCDim ⁡ ( H ) = ∞ {\displaystyle \operatorname {VCDim} (H)=\infty } . So VCDim ⁡ ( H ) ≥ d {\displaystyle \operatorname {VCDim} (H)\geq d} if-and-only-if Growth ⁡ ( H , d ) = 2 d {\displaystyle \operatorname {Growth} (H,d)=2^{d}} . The growth function can be regarded as a refinement of the concept of VC dimension. The VC dimension only tells us whether Growth ⁡ ( H , d ) {\displaystyle \operatorname {Growth} (H,d)} is equal to or smaller than 2 d {\displaystyle 2^{d}} , while the growth function tells us exactly how Growth ⁡ ( H , m ) {\displaystyle \operatorname {Growth} (H,m)} changes as a function of m {\displaystyle m} . Another connection between the growth function and the VC dimension is given by the Sauer–Shelah lemma: If VCDim ⁡ ( H ) = d {\displaystyle \operatorname {VCDim} (H)=d} , then: for all m {\displaystyle m} : Growth ⁡ ( H , m ) ≤ ∑ i = 0 d ( m i ) {\displaystyle \operatorname {Growth} (H,m)\leq \sum _{i=0}^{d}{m \choose i}} In particular, for all m > d + 1 {\displaystyle m>d+1} : Growth ⁡ ( H , m ) ≤ ( e m / d ) d = O ( m d ) {\displaystyle \operatorname {Growth} (H,m)\leq (

    Read more →
  • Bioz

    Bioz

    Bioz is a search engine for life science experimentation. == History == Bioz was founded by Karin Lachmi and Daniel Levitt. Lachmi is a scientist who completed her postdoc in molecular and cellular biology at the Stanford University School of Medicine. During her lab work she found little available data regarding preferable lab tools, reagents and related products for experimentation. There are 50,000 vendors selling 300 million scientific products. She decided to start the company in order to provide researchers with adequate information for that purpose. Co-founder Daniel Levitt is an entrepreneur who sold his company WebAppoint to Microsoft in the year 2000. He also co-founded the company StemRad. At Bioz, Lachmi serves as the Chief Scientific Officer and Levitt serves as the chief executive officer. Bioz claims to have over a million researcher-users from 196 countries. Among the investors are Esther Dyson and the Stanford-StartX Fund. The company's advisory board includes Nobel Laureates in Chemistry Michael Levitt, Roger Kornberg, and Ada Yonath. == Technology == The company uses artificial intelligence, machine learning and natural language processing in order to extract experimentation data from scientific articles, such as the products that researchers used, the companies that supply the products, the protocol conditions that researchers selected, and the types of experiments and techniques. The algorithm ranks products based on how frequently they were used by researchers in their experiments, how recently a product was used, and the impact factor of the journal. The algorithm's output is a Bioz stars score for each product that was mentioned in an article. Bioz is a data-driven platform for product recommendations, which is contrary to platforms such as TripAdvisor and OpenTable that are based on user-generated reviews and ratings. The recommendations and scoring system that the company has developed are meant to assist researchers with the process of developing future medications and finding cures for diseases. They are guided towards products and techniques that were previously used by other researchers when planning and performing experiments. The company's revenue is based on selling SaaS subscriptions to researchers in biopharma companies. They also charge product suppliers for content syndication.

    Read more →
  • PDE surface

    PDE surface

    PDE surfaces are used in geometric modelling and computer graphics for creating smooth surfaces conforming to a given boundary configuration. PDE surfaces use partial differential equations to generate a surface which usually satisfy a mathematical boundary value problem. PDE surfaces were first introduced into the area of geometric modelling and computer graphics by two British mathematicians, Malcolm Bloor and Michael Wilson. == Technical details == The PDE method involves generating a surface for some boundary by means of solving an elliptic partial differential equation of the form ( ∂ 2 ∂ u 2 + a 2 ∂ 2 ∂ v 2 ) 2 X ( u , v ) = 0. {\displaystyle \left({\frac {\partial ^{2}}{\partial u^{2}}}+a^{2}{\frac {\partial ^{2}}{\partial v^{2}}}\right)^{2}X(u,v)=0.} Here X ( u , v ) {\displaystyle X(u,v)} is a function parameterised by the two parameters u {\displaystyle u} and v {\displaystyle v} such that X ( u , v ) = ( x ( u , v ) , y ( u , v ) , z ( u , v ) ) {\displaystyle X(u,v)=(x(u,v),y(u,v),z(u,v))} where x {\displaystyle x} , y {\displaystyle y} and z {\displaystyle z} are the usual cartesian coordinate space. The boundary conditions on the function X ( u , v ) {\displaystyle X(u,v)} and its normal derivatives ∂ X / ∂ n {\displaystyle \partial {X}/\partial {n}} are imposed at the edges of the surface patch. With the above formulation it is notable that the elliptic partial differential operator in the above PDE represents a smoothing process in which the value of the function at any point on the surface is, in some sense, a weighted average of the surrounding values. In this way, a surface is obtained as a smooth transition between the chosen set of boundary conditions. The parameter a {\displaystyle a} is a special design parameter which controls the relative smoothing of the surface in the u {\displaystyle u} and v {\displaystyle v} directions. When a = 1 {\displaystyle a=1} , the PDE is the biharmonic equation: X u u u u + 2 X u u v v + X v v v v = 0 {\displaystyle X_{uuuu}+2X_{uuvv}+X_{vvvv}=0} . The biharmonic equation is the equation produced by applying the Euler-Lagrange equation to the simplified thin plate energy functional X u u 2 + 2 X u v 2 + X v v 2 {\displaystyle X_{uu}^{2}+2X_{uv}^{2}+X_{vv}^{2}} . So solving the PDE with a = 1 {\displaystyle a=1} is equivalent to minimizing the thin plate energy functional subject to the same boundary conditions. == Applications == PDE surfaces can be used in many application areas. These include computer-aided design, interactive design, parametric design, computer animation, computer-aided physical analysis and design optimisation. == Related publications == M.I.G. Bloor and M.J. Wilson, Generating Blend Surfaces using Partial Differential Equations, Computer Aided Design, 21(3), 165–171, (1989). H. Ugail, M.I.G. Bloor, and M.J. Wilson, Techniques for Interactive Design Using the PDE Method, ACM Transactions on Graphics, 18(2), 195–212, (1999). J. Huband, W. Li and R. Smith, An Explicit Representation of Bloor-Wilson PDE Surface Model by using Canonical Basis for Hermite Interpolation, Mathematical Engineering in Industry, 7(4), 421-33 (1999). H. Du and H. Qin, Direct Manipulation and Interactive Sculpting of PDE surfaces, Computer Graphics Forum, 19(3), C261-C270, (2000). H. Ugail, Spine Based Shape Parameterisations for PDE surfaces, Computing, 72, 195–204, (2004). L. You, P. Comninos, J.J. Zhang, PDE Blending Surfaces with C2 Continuity, Computers and Graphics, 28(6), 895–906, (2004).

    Read more →
  • Rule-based machine learning

    Rule-based machine learning

    Rule-based machine learning (RBML) is a term in computer science intended to encompass any machine learning method that identifies, learns, or evolves 'rules' to store, manipulate or apply. The defining characteristic of a rule-based machine learner is the identification and utilization of a set of relational rules that collectively represent the knowledge captured by the system. Rule-based machine learning approaches include learning classifier systems, association rule learning, artificial immune systems, and any other method that relies on a set of rules, each covering contextual knowledge. While rule-based machine learning is conceptually a type of rule-based system, it is distinct from traditional rule-based systems, which are often hand-crafted, and other rule-based decision makers. This is because rule-based machine learning applies some form of learning algorithm such as Rough sets theory to identify and minimise the set of features and to automatically identify useful rules, rather than a human needing to apply prior domain knowledge to manually construct rules and curate a rule set. == Rules == Rules typically take the form of an '{IF:THEN} expression', (e.g. {IF 'condition' THEN 'result'}, or as a more specific example, {IF 'red' AND 'octagon' THEN 'stop-sign}). An individual rule is not in itself a model, since the rule is only applicable when its condition is satisfied. Therefore rule-based machine learning methods typically comprise a set of rules, or knowledge base, that collectively make up the prediction model usually known as decision algorithm. Rules can also be interpreted in various ways depending on the domain knowledge, data types(discrete or continuous) and in combinations. == RIPPER == Repeated incremental pruning to produce error reduction (RIPPER) is a propositional rule learner proposed by William W. Cohen as an optimized version of IREP.

    Read more →
  • Inductive logic programming

    Inductive logic programming

    Inductive logic programming (ILP) is a subfield of symbolic artificial intelligence which uses logic programming as a uniform representation for examples, background knowledge and hypotheses. The term "inductive" here refers to philosophical (i.e. suggesting a theory to explain observed facts) rather than mathematical (i.e. proving a property for all members of a well-ordered set) induction. Given an encoding of the known background knowledge and a set of examples represented as a logical database of facts, an ILP system will derive a hypothesised logic program which entails all the positive and none of the negative examples. Schema: positive examples + negative examples + background knowledge ⇒ hypothesis. Bioinformatics and drug design have been highlighted as a principal application area of inductive logic programming techniques. == History == Building on earlier work on Inductive inference, Gordon Plotkin was the first to formalise induction in a clausal setting around 1970, adopting an approach of generalising from examples. In 1981, Ehud Shapiro introduced several ideas that would shape the field in his new approach of model inference, an algorithm employing refinement and backtracing to search for a complete axiomatisation of given examples. His first implementation was the Model Inference System in 1981: a Prolog program that inductively inferred Horn clause logic programs from positive and negative examples. The term Inductive Logic Programming was first introduced in a paper by Stephen Muggleton in 1990, defined as the intersection of machine learning and logic programming. Muggleton and Wray Buntine introduced predicate invention and inverse resolution in 1988. Several inductive logic programming systems that proved influential appeared in the early 1990s. FOIL, introduced by Ross Quinlan in 1990 was based on upgrading propositional learning algorithms AQ and ID3. Golem, introduced by Muggleton and Feng in 1990, went back to a restricted form of Plotkin's least generalisation algorithm. The Progol system, introduced by Muggleton in 1995, first implemented inverse entailment, and inspired many later systems. Aleph, a descendant of Progol introduced by Ashwin Srinivasan in 2001, is still one of the most widely used systems as of 2022. At around the same time, the first practical applications emerged, particularly in bioinformatics, where by 2000 inductive logic programming had been successfully applied to drug design, carcinogenicity and mutagenicity prediction, and elucidation of the structure and function of proteins. Unlike the focus on automatic programming inherent in the early work, these fields used inductive logic programming techniques from a viewpoint of relational data mining. The success of those initial applications and the lack of progress in recovering larger traditional logic programs shaped the focus of the field. Recently, classical tasks from automated programming have moved back into focus, as the introduction of meta-interpretative learning makes predicate invention and learning recursive programs more feasible. This technique was pioneered with the Metagol system introduced by Muggleton, Dianhuan Lin, Niels Pahlavi and Alireza Tamaddoni-Nezhad in 2014. This allows ILP systems to work with fewer examples, and brought successes in learning string transformation programs, answer set grammars and general algorithms. == Setting == Inductive logic programming has adopted several different learning settings, the most common of which are learning from entailment and learning from interpretations. In both cases, the input is provided in the form of background knowledge B, a logical theory (commonly in the form of clauses used in logic programming), as well as positive and negative examples, denoted E + {\textstyle E^{+}} and E − {\textstyle E^{-}} respectively. The output is given as a hypothesis H, itself a logical theory that typically consists of one or more clauses. The two settings differ in the format of examples presented. === Learning from entailment === As of 2022, learning from entailment is by far the most popular setting for inductive logic programming. In this setting, the positive and negative examples are given as finite sets E + {\textstyle E^{+}} and E − {\textstyle E^{-}} of positive and negated ground literals, respectively. A correct hypothesis H is a set of clauses satisfying the following requirements, where the turnstile symbol ⊨ {\displaystyle \models } stands for logical entailment: Completeness: B ∪ H ⊨ E + Consistency: B ∪ H ∪ E − ⊭ false {\displaystyle {\begin{array}{llll}{\text{Completeness:}}&B\cup H&\models &E^{+}\\{\text{Consistency: }}&B\cup H\cup E^{-}&\not \models &{\textit {false}}\end{array}}} Completeness requires any generated hypothesis H to explain all positive examples E + {\textstyle E^{+}} , and consistency forbids generation of any hypothesis H that is inconsistent with the negative examples E − {\textstyle E^{-}} , both given the background knowledge B. In Muggleton's setting of concept learning, "completeness" is referred to as "sufficiency", and "consistency" as "strong consistency". Two further conditions are added: "Necessity", which postulates that B does not entail E + {\textstyle E^{+}} , does not impose a restriction on H, but forbids any generation of a hypothesis as long as the positive facts are explainable without it. "Weak consistency", which states that no contradiction can be derived from B ∧ H {\textstyle B\land H} , forbids generation of any hypothesis H that contradicts the background knowledge B. Weak consistency is implied by strong consistency; if no negative examples are given, both requirements coincide. Weak consistency is particularly important in the case of noisy data, where completeness and strong consistency cannot be guaranteed. === Learning from interpretations === In learning from interpretations, the positive and negative examples are given as a set of complete or partial Herbrand structures, each of which are themselves a finite set of ground literals. Such a structure e is said to be a model of the set of clauses B ∪ H {\textstyle B\cup H} if for any substitution θ {\textstyle \theta } and any clause h e a d ← b o d y {\textstyle \mathrm {head} \leftarrow \mathrm {body} } in B ∪ H {\textstyle B\cup H} such that b o d y θ ⊆ e {\textstyle \mathrm {body} \theta \subseteq e} , h e a d θ ⊆ e {\displaystyle \mathrm {head} \theta \subseteq e} also holds. The goal is then to output a hypothesis that is complete, meaning every positive example is a model of B ∪ H {\textstyle B\cup H} , and consistent, meaning that no negative example is a model of B ∪ H {\textstyle B\cup H} . == Approaches to ILP == An inductive logic programming system is a program that takes as an input logic theories B , E + , E − {\displaystyle B,E^{+},E^{-}} and outputs a correct hypothesis H with respect to theories B , E + , E − {\displaystyle B,E^{+},E^{-}} . A system is complete if and only if for any input logic theories B , E + , E − {\displaystyle B,E^{+},E^{-}} any correct hypothesis H with respect to these input theories can be found with its hypothesis search procedure. Inductive logic programming systems can be roughly divided into two classes, search-based and meta-interpretative systems. Search-based systems exploit that the space of possible clauses forms a complete lattice under the subsumption relation, where one clause C 1 {\textstyle C_{1}} subsumes another clause C 2 {\textstyle C_{2}} if there is a substitution θ {\textstyle \theta } such that C 1 θ {\textstyle C_{1}\theta } , the result of applying θ {\textstyle \theta } to C 1 {\textstyle C_{1}} , is a subset of C 2 {\textstyle C_{2}} . This lattice can be traversed either bottom-up or top-down. === Bottom-up search === Bottom-up methods to search the subsumption lattice have been investigated since Plotkin's first work on formalising induction in clausal logic in 1970. Techniques used include least general generalisation, based on anti-unification, and inverse resolution, based on inverting the resolution inference rule. ==== Least general generalisation ==== A least general generalisation algorithm takes as input two clauses C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} and outputs the least general generalisation of C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} , that is, a clause C {\textstyle C} that subsumes C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} , and that is subsumed by every other clause that subsumes C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} . The least general generalisation can be computed by first computing all selections from C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} , which are pairs of literals ( L , M ) ∈ ( C 1 × C 2 ) {\displaystyle (L,M)\in (C_{1}\times C_{2})} sharing the same predicate symbol and negated/unnegated status. Then, the least general generalisation is obtained as the disjunction of the least general generalisations of the indi

    Read more →
  • Information Harvesting

    Information Harvesting

    Information Harvesting (IH) was an early data mining product from the 1990s. It was invented by Ralphe Wiggins and produced by the Ryan Corp, later Information Harvesting Inc., of Cambridge, Massachusetts. Wiggins had a background in genetic algorithms and fuzzy logic. IH sought to infer rules from sets of data. It did this first by classifying various input variables into one of a number of bins, thereby putting some structure on the continuous variables in the input. IH then proceeds to generate rules, trading off generalization against memorization, that will infer the value of the prediction variable, possibly creating many levels of rules in the process. It included strategies for checking if overfitting took place and, if so, correcting for it. Because of its strategies for correcting for overfitting by considering more data, and refining the rules based on that data, IH might also be considered to be a form of machine learning. The advantage of IH, as compared with other data mining products of its time and even later, was that it provided a mechanism for finding multiple rules that would classify the data and determining, according to set criteria, the best rules to use.

    Read more →
  • Drop shadow

    Drop shadow

    In graphic design and computer graphics, a drop shadow is a visual effect consisting of a drawing element which looks like the shadow of an object, giving the impression that the object is raised above the objects behind it. The drop shadow is often used for elements of a graphical user interface such as windows or menus, and for simple text. The text label for icons on desktops in many desktop environments has a drop shadow, as this effect effectively distinguishes the text from any colored background it may be in front of. A simple way of drawing a drop shadow of a rectangular object is to draw a gray or black area underneath and offset from the object. In general, a drop shadow is a copy in black or gray of the object, drawn in a slightly different position. Realism may be increased by: Darkening the colors of the pixels where the shadow casts instead of making them gray. This can be done with alpha blending the shadow with the area it is cast on. Softening the edges of the shadow. This can be done by adding Gaussian blur to the shadow's alpha channel before blending. Inset drop shadows are a type which draws the shadows inside the element. This allows the interface element to appear as if it is sunken into the interface. == Photo editing == In photo editing or photography post-production, a drop shadow may be added right beneath a model or product in the image. It is used to create contrast between the background and the subject. To add a drop shadow, retouchers use graphic editing tools like Adobe Photoshop. Drop shadows are often used as a visual effect in e-commerce. This is done to improve the presentation of product images and create depth in the image. == Use == Generally, window managers which are capable of compositing allow drop shadow effects, whereas incapable window managers do not. In some operating systems like macOS, drop shadow is used to differentiate between active and inactive windows. Websites are able to use drop shadow effects through the CSS properties box-shadow, text-shadow, and drop-shadow() filter function in filter. The first two are used for elements and text respectively, while the filter applies to the element's content, letting it support oddly shaped elements or transparent images.

    Read more →
  • Generalized multidimensional scaling

    Generalized multidimensional scaling

    Generalized multidimensional scaling (GMDS) is an extension of metric multidimensional scaling, in which the target space is non-Euclidean. When the dissimilarities are distances on a surface and the target space is another surface, GMDS allows finding the minimum-distortion embedding of one surface into another. GMDS is an emerging research direction. Currently, main applications are recognition of deformable objects (e.g. for three-dimensional face recognition) and texture mapping.

    Read more →
  • Consensus clustering

    Consensus clustering

    Consensus clustering is a method of aggregating (potentially conflicting) results from multiple clustering algorithms. Also called cluster ensembles or aggregation of clustering (or partitions), it refers to the situation in which a number of different (input) clusterings have been obtained for a particular dataset and it is desired to find a single (consensus) clustering which is a better fit in some sense than the existing clusterings. Consensus clustering is thus the problem of reconciling clustering information about the same data set coming from different sources or from different runs of the same algorithm. When cast as an optimization problem, consensus clustering is known as median partition, and has been shown to be NP-complete, even when the number of input clusterings is three. Consensus clustering for unsupervised learning is analogous to ensemble learning in supervised learning. == Issues with existing clustering techniques == Current clustering techniques do not address all the requirements adequately. Dealing with large number of dimensions and large number of data items can be problematic because of time complexity; Effectiveness of the method depends on the definition of "distance" (for distance-based clustering) If an obvious distance measure doesn't exist, we must "define" it, which is not always easy, especially in multidimensional spaces. The result of the clustering algorithm (that, in many cases, can be arbitrary itself) can be interpreted in different ways. == Justification for using consensus clustering == There are potential shortcomings for all existing clustering techniques. This may cause interpretation of results to become difficult, especially when there is no knowledge about the number of clusters. Clustering methods are also very sensitive to the initial clustering settings, which can cause non-significant data to be amplified in non-reiterative methods. An extremely important issue in cluster analysis is the validation of the clustering results, that is, how to gain confidence about the significance of the clusters provided by the clustering technique (cluster numbers and cluster assignments). Lacking an external objective criterion (the equivalent of a known class label in supervised analysis), this validation becomes somewhat elusive. Iterative descent clustering methods, such as the SOM and k-means clustering circumvent some of the shortcomings of hierarchical clustering by providing for univocally defined clusters and cluster boundaries. Consensus clustering provides a method that represents the consensus across multiple runs of a clustering algorithm, to determine the number of clusters in the data, and to assess the stability of the discovered clusters. The method can also be used to represent the consensus over multiple runs of a clustering algorithm with random restart (such as K-means, model-based Bayesian clustering, SOM, etc.), so as to account for its sensitivity to the initial conditions. It can provide data for a visualization tool to inspect cluster number, membership, and boundaries. However, they lack the intuitive and visual appeal of hierarchical clustering dendrograms, and the number of clusters must be chosen a priori. == The Monti consensus clustering algorithm == The Monti consensus clustering algorithm is one of the most popular consensus clustering algorithms and is used to determine the number of clusters, K {\displaystyle K} . Given a dataset of N {\displaystyle N} total number of points to cluster, this algorithm works by resampling and clustering the data, for each K {\displaystyle K} and a N × N {\displaystyle N\times N} consensus matrix is calculated, where each element represents the fraction of times two samples clustered together. A perfectly stable matrix would consist entirely of zeros and ones, representing all sample pairs always clustering together or not together over all resampling iterations. The relative stability of the consensus matrices can be used to infer the optimal K {\displaystyle K} . More specifically, given a set of points to cluster, D = { e 1 , e 2 , . . . e N } {\displaystyle D=\{e_{1},e_{2},...e_{N}\}} , let D 1 , D 2 , . . . , D H {\displaystyle D^{1},D^{2},...,D^{H}} be the list of H {\displaystyle H} perturbed (resampled) datasets of the original dataset D {\displaystyle D} , and let M h {\displaystyle M^{h}} denote the N × N {\displaystyle N\times N} connectivity matrix resulting from applying a clustering algorithm to the dataset D h {\displaystyle D^{h}} . The entries of M h {\displaystyle M^{h}} are defined as follows: M h ( i , j ) = { 1 , if points i and j belong to the same cluster 0 , otherwise {\displaystyle M^{h}(i,j)={\begin{cases}1,&{\text{if}}{\text{ points i and j belong to the same cluster}}\\0,&{\text{otherwise}}\end{cases}}} Let I h {\displaystyle I^{h}} be the N × N {\displaystyle N\times N} identicator matrix where the ( i , j ) {\displaystyle (i,j)} -th entry is equal to 1 if points i {\displaystyle i} and j {\displaystyle j} are in the same perturbed dataset D h {\displaystyle D^{h}} , and 0 otherwise. The indicator matrix is used to keep track of which samples were selected during each resampling iteration for the normalisation step. The consensus matrix C {\displaystyle C} is defined as the normalised sum of all connectivity matrices of all the perturbed datasets and a different one is calculated for every K {\displaystyle K} . C ( i , j ) = ( ∑ h = 1 H M h ( i , j ) ∑ h = 1 H I h ( i , j ) ) {\displaystyle C(i,j)=\left({\frac {\textstyle \sum _{h=1}^{H}M^{h}(i,j)\displaystyle }{\sum _{h=1}^{H}I^{h}(i,j)}}\right)} That is the entry ( i , j ) {\displaystyle (i,j)} in the consensus matrix is the number of times points i {\displaystyle i} and j {\displaystyle j} were clustered together divided by the total number of times they were selected together. The matrix is symmetric and each element is defined within the range [ 0 , 1 ] {\displaystyle [0,1]} . A consensus matrix is calculated for each K {\displaystyle K} to be tested, and the stability of each matrix, that is how far the matrix is towards a matrix of perfect stability (just zeros and ones) is used to determine the optimal K {\displaystyle K} . One way of quantifying the stability of the K {\displaystyle K} th consensus matrix is examining its CDF curve (see below). == Over-interpretation potential of the Monti consensus clustering algorithm == Monti consensus clustering can be a powerful tool for identifying clusters, but it needs to be applied with caution as shown by Şenbabaoğlu et al. It has been shown that the Monti consensus clustering algorithm is able to claim apparent stability of chance partitioning of null datasets drawn from a unimodal distribution, and thus has the potential to lead to over-interpretation of cluster stability in a real study. If clusters are not well separated, consensus clustering could lead one to conclude apparent structure when there is none, or declare cluster stability when it is subtle. Identifying false positive clusters is a common problem throughout cluster research, and has been addressed by methods such as SigClust and the GAP-statistic. However, these methods rely on certain assumptions for the null model that may not always be appropriate. Şenbabaoğlu et al demonstrated the original delta K metric to decide K {\displaystyle K} in the Monti algorithm performed poorly, and proposed a new superior metric for measuring the stability of consensus matrices using their CDF curves. In the CDF curve of a consensus matrix, the lower left portion represents sample pairs rarely clustered together, the upper right portion represents those almost always clustered together, whereas the middle segment represent those with ambiguous assignments in different clustering runs. The proportion of ambiguous clustering (PAC) score measure quantifies this middle segment; and is defined as the fraction of sample pairs with consensus indices falling in the interval (u1, u2) ∈ [0, 1] where u1 is a value close to 0 and u2 is a value close to 1 (for instance u1=0.1 and u2=0.9). A low value of PAC indicates a flat middle segment, and a low rate of discordant assignments across permuted clustering runs. One can therefore infer the optimal number of clusters by the K {\displaystyle K} value having the lowest PAC. == Related work == Clustering ensemble (Strehl and Ghosh): They considered various formulations for the problem, most of which reduce the problem to a hyper-graph partitioning problem. In one of their formulations they considered the same graph as in the correlation clustering problem. The solution they proposed is to compute the best k-partition of the graph, which does not take into account the penalty for merging two nodes that are far apart. Clustering aggregation (Fern and Brodley): They applied the clustering aggregation idea to a collection of soft clusterings they obtained by random projections. They used an agglomerative algorithm

    Read more →
  • Transkribus

    Transkribus

    Transkribus is a platform for the text recognition, image analysis and structure recognition of historical documents. The platform was created in the context of the two EU projects "tranScriptorium" (2013–2015) and "READ" (Recognition and Enrichment of Archival Documents – 2016–2019). It was developed by the University of Innsbruck. Since July 1, 2019 the platform has been directed and further developed by the READ-COOP, a non-profit cooperative. The platform integrates tools developed by research groups throughout Europe, including the Pattern Recognition and Human Language Technology (PRHLT) group of the Technical University of Valencia and the Computational Intelligence Technology Lab (CITlab) group of University of Rostock. Comparable programs that offer similar functions are eScriptorium and OCR4All.

    Read more →
  • Condensation algorithm

    Condensation algorithm

    The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem. The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998. One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques. The algorithm's creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The condensation algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements. == Algorithm overview == The condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector x t {\displaystyle \mathbf {x_{t}} } at time t {\displaystyle t} , given observations z 1 , . . . , z t {\displaystyle \mathbf {z_{1},...,z_{t}} } of the detected features in the images up to and including the current time. The algorithm outputs an estimate to the state conditional probability density p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method. p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model since it models the joint distribution of the object and the observer. The conditional density of the object at the current time p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is estimated as a weighted, time-indexed sample set { s t ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{t}^{(n)},n=1,...,N\}} with weights π t ( n ) {\displaystyle \pi _{t}^{(n)}} . N is a parameter determining the number of sample sets chosen. A realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is obtained by sampling with replacement from the set s t {\displaystyle s_{t}} with probability equal to the corresponding element of π t {\displaystyle \pi _{t}} . The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the condensation algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} . The model of the system dynamics determined by p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics. The algorithm can be summarized by initialization at time t = 0 {\displaystyle t=0} and three steps at each time t: === Initialization === Form the initial sample set and weights by sampling according to the prior distribution. For example, specify as Gaussian and set the weights equal to each other. === Iterative procedure === Sample with replacement N {\displaystyle N} times from the set { s 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{0}^{(n)},n=1,...,N\}} with probability { π 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{\pi _{0}^{(n)},n=1,...,N\}} to generate a realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} . Apply the learned dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} to each element of this new set, to generate a new set { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . To take into account the current observation z t {\displaystyle \mathbf {z_{t}} } , set π t ( n ) = p ( z t | s ( n ) ) ∑ j = 1 N p ( z t | s ( j ) ) {\displaystyle \pi _{t}^{(n)}={\frac {p(\mathbf {z_{t}} |s^{(n)})}{\sum _{j=1}^{N}p(\mathbf {z_{t}} |s^{(j)})}}} for each element { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . This algorithm outputs the probability distribution p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object. Cumulative weights can instead be used to achieve a more efficient sampling. == Implementation considerations == Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The condensation algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter N {\displaystyle N} , which determines the number of samples in the sample set, will clearly hold a trade-off in efficiency versus performance. One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object. Isard and Blake model the object dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} as a second order difference equation with deterministic and stochastic components: p ( x t | x t − 1 ) ∝ e − 1 2 | | B − 1 ( ( x t − x ¯ ) − A ( x t − 1 − x ¯ ) ) | | 2 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )\propto e^{-{\frac {1}{2}}||B^{-1}((\mathbf {x_{t}} -\mathbf {\bar {x}} )-A(\mathbf {x_{t-1}} -\mathbf {\bar {x}} ))||^{2})}} where x ¯ {\displaystyle \mathbf {\bar {x}} } is the mean value of the state, and A {\displaystyle A} , B {\displaystyle B} are matrices representing the deterministic and stochastic components of the dynamical model respectively. A {\displaystyle A} , B {\displaystyle B} , and x ¯ {\displaystyle \mathbf {\bar {x}} } are estimated via Maximum Likelihood Estimation while the object performs typical movements. The observation model p ( z | x ) {\displaystyle p(\mathbf {z} |\mathbf {x} )} cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density λ {\displaystyle \lambda } and that any true target measurement is unbiased and normally distributed with standard deviation σ {\displaystyle \sigma } . The basic condensation algorithm is used to track a single object in time. It is possible to extend the condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time. Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks. Smoothing cannot be directly done in real-time since it requires information of future measurements. == Applications == The algorithm can be used for vision-based robot localization of mobile robots. Instead of tracking the position of an object in the scene, however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment. Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the ran

    Read more →
  • TabPFN

    TabPFN

    TabPFN (Tabular Prior-data Fitted Network) is a machine learning model for tabular datasets proposed in 2022. It uses a transformer architecture. It is intended for supervised classification and regression analysis on tabular datasets, particularly focusing on small- to medium-sized datasets. The latest version, TabPFN-3, was released in May 2026 and supports datasets with up to one million rows and 200 features. == History == TabPFN was first introduced in a 2022 pre-print and presented at ICLR 2023. TabPFN v2 was published in 2025 in Nature by Hollmann and co-authors. The source code is published on GitHub under a modified Apache License and on PyPi. Writing for ICLR blogs, McCarter states that the model has attracted attention due to its performance on small dataset benchmarks. TabPFN v2.5 was released on November 6, 2025. TabPFN-3 was released on May 12, 2026. Prior Labs, founded in 2024, aims to commercialize TabPFN. As of April 2026, the open-source TabPFN repository had more than 6,000 stars on GitHub. == Overview and pre-training == TabPFN supports classification, regression and generative tasks. It leverages "Prior-Data Fitted Networks" models to model tabular data. By using a transformer pre-trained on synthetic tabular datasets, TabPFN avoids benchmark contamination and costs of curating real-world data. TabPFN v2 was pre-trained on approximately 130 million such datasets. Synthetic datasets are generated using causal models or Bayesian neural networks; this can include simulating missing values, imbalanced data, and noise. Random inputs are passed through these models to generate outputs, with a bias towards simpler causal structures. During pre-training, TabPFN predicts the masked target values of new data points given training data points and their known targets, effectively learning a generic learning algorithm that is executed by running a neural network forward pass. The new dataset is then processed in a single forward pass without retraining. The model's transformer encoder processes features and labels by alternating attention across rows and columns. TabPFN v2 handles numerical and categorical features, missing values, and supports tasks like regression and synthetic data generation, while TabPFN-2.5 scales this approach to datasets with up to 50,000 rows and 2,000 features. TabPFN-3 introduced a redesigned architecture with row-compression, an attention-based many-class decoder, native missing-value handling, and inference optimizations such as row chunking and a reduced key-value cache, with benchmark-validated regimes of up to 1 million rows with 200 features, 100,000 rows with 2,000 features, or 1,000 rows with 20,000 features. Since TabPFN is pre-trained, in contrast to other deep learning methods, it does not require costly hyperparameter optimization. == Research == TabPFN is the subject of on-going research. Applications for TabPFN have been investigated for domains such as chemoproteomics, insurance risk classification, and metagenomics. In clinical research, TabPFN was used in a study on the early detection of pancreatic cancer from blood samples, where it was combined with metabolomic data and reported high diagnostic performance. == Applications == TabPFN has been used in industrial and biomedical contexts. Hitachi Ltd. has been reported to use the model for predictive maintenance in rail networks, with its use described as helping to identify track issues earlier and reduce manual inspections. In the biomedical domain, Oxford Cancer Analytics has used TabPFN in the analysis of proteomic data in lung disease research. A 2025 ML Contests report noted that the winners of DrivenData's PREPARE challenge used TabPFN to generate features for gradient-boosted decision tree models. == Limitations == TabPFN has been criticized for its "one large neural network is all you need" approach to modeling problems. Further, its performance is limited in high-dimensional and large-scale datasets. == Scaling Mode == In late November 2025, Prior Labs introduced ‘‘Scaling Mode’’, an operating mode for TabPFN designed to remove the fixed upper bound on training set size. Earlier versions of TabPFN had been optimized and validated primarily for datasets of up to 100,000 rows, whereas Scaling Mode was reported to extend support to substantially larger datasets, with benchmarked experiments on datasets containing up to 10 million rows. According to Prior Labs, Scaling Mode preserves the existing TabPFN architecture, including its alternating row-attention and column-attention design, as well as the same feature-count limits as prior releases. Inference remains based on a single forward pass rather than dataset-specific gradient-descent training, while scalability is described as being constrained primarily by available compute and memory resources. Prior Labs reported benchmark results on an internal collection of datasets ranging from 1 million to 10 million rows across industry and scientific applications. In these benchmarks, Scaling Mode was compared with CatBoost, XGBoost, LightGBM, and TabPFN 2.5 using 50,000-row subsampling. The company stated that predictive performance improved monotonically with increasing training set size and that no diminishing returns from scaling were observed within the tested range. Prior Labs also announced the release through company and executive social media channels. TabPFN-3 later incorporated related scaling improvements, including row chunking and a reduced key-value cache, into the model architecture and inference pipeline.

    Read more →
  • Witness set

    Witness set

    In combinatorics and computational learning theory, a witness set is a set of elements that distinguishes a given Boolean function from a given class of other Boolean functions. Let C {\displaystyle C} be a concept class over a domain X {\displaystyle X} (that is, a family of Boolean functions over X {\displaystyle X} ) and c {\displaystyle c} be a concept in X {\displaystyle X} (a single Boolean function). A subset S {\displaystyle S} of X {\displaystyle X} is a witness set for c {\displaystyle c} in X {\displaystyle X} if S {\displaystyle S} distinguishes c {\displaystyle c} from all the other functions in C {\displaystyle C} , in the sense that no other function in C {\displaystyle C} has the same values on S {\displaystyle S} . For a concept class with | C | {\displaystyle |C|} concepts, there exists a concept that has a witness of size at most log 2 ⁡ | C | {\displaystyle \log _{2}|C|} ; this bound is tight when C {\displaystyle C} consists of all Boolean functions over X {\displaystyle X} . By a result of Bondy (1972) there exists a single witness set of size at most | C | − 1 {\displaystyle |C|-1} that is valid for all concepts in C {\displaystyle C} ; this bound is tight when C {\displaystyle C} consists of the indicator functions of the empty set and some singleton sets. One way to construct this set is to interpret the concepts as bitstrings, and the domain elements as positions in these bitstrings. Then the set of positions at which a trie of the bitstrings branches forms the desired witness set. This construction is central to the operation of the fusion tree data structure. The minimum size of a witness set for c {\displaystyle c} is called the witness size or specification number and is denoted by w C ( c ) {\displaystyle w_{C}(c)} . The value max { w C ( c ) : c ∈ C } {\displaystyle \max\{w_{C}(c):c\in C\}} is called the teaching dimension of C {\displaystyle C} . It represents the number of examples of a concept that need to be presented by a teacher to a learner, in the worst case, to enable the learner to determine which concept is being presented. Witness sets have also been called teaching sets, keys, specifying sets, or discriminants. The "witness set" terminology is from Kushilevitz et al. (1996), who trace the concept of witness sets to work by Cover (1965).

    Read more →