AI Email Blueprint

AI Email Blueprint — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Graphics processing unit

    Graphics processing unit

    A graphics processing unit (GPU) is a specialized electronic circuit designed for digital image processing and to accelerate computer graphics, being present either as a component on a discrete graphics card or embedded on motherboards, mobile phones, personal computers, workstations, and game consoles. GPUs are increasingly being used for artificial intelligence (AI) processing due to linear algebra acceleration, which is also used extensively in graphics processing. Although there is no single definition of the term, and it may be used to describe any video display system, in modern use a GPU includes the ability to internally perform the calculations needed for various graphics tasks, like rotating and scaling 3D images, and often the additional ability to run custom programs known as shaders. This contrasts with earlier graphics controllers known as video display controllers which had no internal calculation capabilities, or blitters, which performed only basic memory movement operations. The modern GPU emerged during the 1990s, adding the ability to perform operations like drawing lines and text without CPU help, and later adding 3D functionality. Graphics functions are generally independent and this lends these tasks to being implemented on separate calculation engines. Modern GPUs include hundreds, or thousands, of calculation units. This made them useful for non-graphic calculations involving embarrassingly parallel problems due to their parallel structure. The ability of GPUs to rapidly perform vast numbers of calculations has led to their adoption in diverse fields including artificial intelligence (AI) where they excel at handling data-intensive and computationally demanding tasks. Other non-graphical uses include the training of neural networks and cryptocurrency mining. == History == === 1960s === Dedicated 3D graphics hardware dates back to graphic terminals such as the Adage AGT-30 from 1967 with analog matrix processors. In 1969 Evans & Sutherland (E&S) introduced the Line Drawing System-1 (LDS-1), which was the first all-digital system to provide matrix multiplication. Also in 1969, the low-cost graphics terminal IMLAC PDS-1 was introduced. It later saw use as an early 3D gaming machine with the likes of Maze War. === 1970s === In professional hardware, in 1972 PLATO IV system becomes operational at the University of Illinois Urbana-Champaign. Between around 1973 and 1978, several networked multiplayer wireframe 3D games are implemented and popularized by users of the system. Also in 1972, the E&S Continuous Tone 1 (CT1) "Watkins box" system (consisting of an E&S LDS-2 and Shaded Picture System) is delivered to Case Western Reserve University. It offered the first real-time Gouraud shading. In 1975, a joint effort between Evans & Sutherland Computer Corporation and the University of Utah's computer graphics department results in the first ever MOSFET video framebuffer, capable of color and smooth shading. E&S Continuous Tone 3 (CT3) system was delivered in 1977 to Lufthansa for pilot training using computer simulation. It was the first graphics system capable of real-time texture mapping. Ikonas made graphics systems with 8- and 24-bit graphics and 3D acceleration in the late 70s. Arcade system boards have used specialized 2D graphics circuits since the 1970s. In early video game hardware, RAM for frame buffers was expensive, so video chips composited data together as the display was being scanned out on the monitor. A specialized barrel shifter circuit helped the CPU animate the framebuffer graphics for various 1970s arcade video games from Midway and Taito, such as Gun Fight (1975), Sea Wolf (1976), and Space Invaders (1978). The Namco Galaxian arcade system in 1979 used specialized graphics hardware that supported RGB color, multi-colored sprites, and tilemap backgrounds. The Galaxian hardware was widely used during the golden age of arcade video games, by game companies such as Namco, Centuri, Gremlin, Irem, Konami, Midway, Nichibutsu, Sega, and Taito. The Atari 2600 in 1977 used a video shifter called the Television Interface Adaptor. Atari 8-bit computers (1979) had ANTIC, a video processor which interpreted instructions describing a "display list"—the way the scan lines map to specific bitmapped or character modes and where the memory is stored (so there did not need to be a contiguous frame buffer). 6502 machine code subroutines could be triggered on scan lines by setting a bit on a display list instruction. ANTIC also supported smooth vertical and horizontal scrolling independent of the CPU. === 1980s === In the 1980s significant advancements were made in professional 3D graphics hardware. Perhaps most impactful was the 1981 development of the Geometry Engine, a VLSI vector processor ASIC designed by Jim Clark and Marc Hannah at Stanford University. This processor is the forerunner of modern tensor cores and other similar processors marketed for graphics and AI. The Geometry Engine went on to be used in Silicon Graphics workstations for many years. Silicon Graphics's first product, shipped in November 1983, was the IRIS 1000, a terminal with hardware-accelerated 3D graphics based on the Geometry Engine. The Geometry Engine was capable of approximately 6 million operations per second. The 1981 NEC μPD7220 was the first implementation of a personal computer graphics display processor as a single large-scale integration (LSI) integrated circuit chip. This enabled the design of low-cost, high-performance video graphics cards such as those from Number Nine Visual Technology. It became the best-known GPU until the mid-1980s. It was the first fully integrated VLSI (very large-scale integration) metal–oxide–semiconductor (NMOS) graphics display processor for PCs, supported up to 1024×1024 resolution, and laid the foundations for the PC graphics market. It was used in a number of graphics cards and was licensed for clones such as the Intel 82720, the first of Intel's graphics processing units. The Williams Electronics arcade games Robotron: 2084, Joust, Sinistar, and Bubbles, all released in 1982, contain custom blitter chips for operating on 16-color bitmaps. In 1984, Hitachi released the ARTC HD63484, the first major CMOS graphics processor for personal computers. The ARTC could display up to 4K resolution when in monochrome mode. It was used in a number of graphics cards and terminals during the late 1980s. In 1985, the Amiga was released with a custom graphics chip called Agnus including a blitter for bitmap manipulation, line drawing, and area fill. It also included a coprocessor with its own simple instruction set, that was capable of manipulating graphics hardware registers in sync with the video beam (e.g. for per-scanline palette switches, sprite multiplexing, and hardware windowing), or driving the blitter. Also in 1985, IBM released the Professional Graphics Controller, designed by later to be Nvidia co-founder Curtis Priem, which was a rudimentary 3D card with 640 × 480 256-color graphics which used a dedicated CPU to draw graphics independently of the main system. It was used as the basis of cards by a number of makers (including Matrox) and its analog RGB signaling led directly to the VGA video standard. Priem later in the 80s worked on the influential Sun Microsystems GX (also known as cgsix) accelerated 2D graphics card. In 1986, Texas Instruments released the TMS34010, the first fully programmable graphics processor. It could run general-purpose code but also had a graphics-oriented instruction set. During 1990–1992, this chip became the basis of the Texas Instruments Graphics Architecture ("TIGA") Windows accelerator cards. Following in 1987, the IBM 8514 graphics system was released. It was one of the first video cards for IBM PC compatibles that implemented fixed-function 2D primitives in electronic hardware. Sharp's X68000, released in 1987, used a custom graphics chipset with a 65,536 color palette and hardware support for sprites, scrolling, and multiple playfields. It served as a development machine for Capcom's CP System arcade board. Fujitsu's FM Towns computer, released in 1989, had support for a 16,777,216 color palette. For context, IBM also introduced its Video Graphics Array (VGA) display system in 1987, with a maximum resolution of 640 × 480 pixels. Unlike 8514/A, VGA had no hardware acceleration features. In November 1988, NEC Home Electronics announced its creation of the Video Electronics Standards Association (VESA) to develop and promote a Super VGA (SVGA) computer display standard as a successor to VGA. Super VGA enabled graphics display resolutions up to 800 × 600 pixels, a 56% increase. In 1988 SGI sold IRIS workstation graphics with 10-12 Geometry Engines and introduced the IrisVision add-in board for IBM MicroChannel bus (RS/6000) based on the Geometry Engine as well. In 1988 as well, the first dedicated polygonal 3D graphics boards in arcade machines were introduced wit

    Read more →
  • Radioplayer

    Radioplayer

    Radioplayer is a radio technology platform, owned by UK radio broadcasters and operated under licence in some other countries. It operates an internet radio web tuner, a set of mobile phone apps, an in-car adaptor, and a growing range of integrations with other connected devices and platforms. Radioplayer is operated by UK Radioplayer Ltd which is a not-for-profit organisation owned by UK radio broadcasters. Initial shareholders were the BBC, Global Radio, GMG Radio, Absolute Radio and RadioCentre. After consolidation in the radio market, current shareholders are the BBC, Global Radio, Bauer Media Group and RadioCentre. == History == Launched in the UK on 31 March 2011, Radioplayer set out to offer a simple and accessible way to listen to radio via the internet. It contained 157 stations at launch. Initially working internally at the BBC for Tim Davie, then Director of BBC Audio & Music, Michael Hill led the project since March 2009; he was made Managing Director of UK Radioplayer Ltd on 28 July 2010. At launch, Radioplayer was a simple and straightforward Flash-based radio player, linked-to by radio stations on their own website. The player included searching and bookmarking across all of UK radio station content. On 5 October 2012, Radioplayer launched a mobile app on iOS phones with an Android version following shortly afterwards. The apps are unavailable for download outside the United Kingdom. This was followed by a tablet app on 25 September 2013. The apps also support Android Wear, Android Auto, Smart Device Link, Apple Watch and Apple CarPlay. They are also compatible with Chromecast and Airplay. In September 2016, Radioplayer announced it had been chosen by Amazon to integrate with their new voice-controlled 'Echo' device, ahead of its UK launch. In July 2017, Radioplayer integrated with the Sonos and Bose multi-room speaker platforms. UK Radioplayer currently contains around 500 UK stations, from Ofcom-licensed broadcasters. Online-only 'sister-stations' can also be added, but only by broadcasters with Ofcom licences which have been on the platform for over a year. == Radioplayer Car == Radioplayer Car was announced in September 2014 as a hybrid radio receiver that switches between FM, DAB and streaming to find the strongest signal. Speaking in Oslo in June 2015, Michael Hill said that he hoped to launch the product in the UK and Norway during the summer of 2015. In February 2017, Radioplayer Car was launched. It was marketed as the world’s first voice-controlled hybrid radio adaptor for car stereos. A small box, fitted behind the dashboard, links to the auxiliary input on an existing car radio. It connects wirelessly via Bluetooth to the driver’s smartphone by an app. The adaptor enabled drivers to listen to their own smartphone music collections using Bluetooth, take hands-free calls, listen to inbound text messages and receive instant audio travel news, customised by GPS to their location and direction of travel. The hardware was manufactured under licence by car audio interfaces supplier Connects2, and Hyde Park Corner was promoted as the preferred installer of the audio equipment. There were several spin-off benefits of the Radioplayer Car project, including the creation of the hybrid radio metadata API for cars, known as the 'WRAPI' (Worldwide Radioplayer API). == International == Through a separate company called Radioplayer Worldwide, Radioplayer technology is licensed to a number of different territories.

    Read more →
  • GEPIR

    GEPIR

    GEPIR (Global Electronic Party Information Registry) was a distributed database operated and owned by GS1 that contains basic information on over 1,000,000 companies in over 100 countries. The database could be searched by Global Trade Item Number (GTIN) code (including Universal Product Code (UPC) and EAN-13 codes), container Code (Serial Shipping Container Code (SSCC)), location number (Global Location Number (GLN)), and (in some countries) the company name. A SOAP webservice existed for API access. As of end December 2023, GEPIR was replaced by a service called Verified by GS1. While it operated, GEPIR had more than 1 million members in more than 100 countries. In 2013, all GS1 111 member organisations joined GEPIR. == Access == GEPIR was accessible for free in almost all countries but the number of request per day was limited (from 20 to 30). Since October 2013, GS1 France restricts access to GEPIR to companies (registration with SIREN code was required to use it). A premium access service had been created by GS1 France in January 2010 which allows companies to use GS1 web and SOAP interface without any limit. == System architecture == GEPIR was a lookup service coordinated by the GS1 GO that provided all end users with the ability to look up information about GS1 Identification Keys. Depending on the service, systems were provided by GS1 Member Organisations (MOs) or 3rd party service providers, or both. Where a GS1 MO did not choose to provide the service directly to its end users, the GS1 Global Office provided the service for that geography. Some services involved a technical component deployed by the GS1 Global Office that coordinates the systems provided by GS1 MOs and/or 3rd party service providers. The GEPIR service was provided by systems deployed by GS1 MOs, with the GS1 GO providing a central point of coordination to federate the local systems. The GS1 GO also provides the MO-level service for MOs that could not or did not wish to deploy their own system.

    Read more →
  • Tandem Money

    Tandem Money

    Tandem is one of the UK's original challenger banks. Tandem is a digital bank with a mobile app, and no branches. The acquisition of Harrods Bank in 2017 allowed the company to provide services using the former's banking licence. Tandem Bank Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority. Tandem has offices across the UK in Blackpool, Cardiff, Durham and London, employing over 500 people. == History == The company was founded by Ricky Knox, Matt Cooper and Michael Kent in 2014. In December 2016, Tandem announced that it had secured a £35 million investment from The Sanpower Group, the Chinese company that also owned the department store House of Fraser; however, £29 million of this investment was later revoked by Sanpower over concerns that the Chinese Government would object to the investment following increased restrictions on outbound investment in China. This resulted in a delay in the launch of Tandem's savings products, which, at the time of the revocation, was expected imminently and, more importantly, meant that Tandem volunteered the return of their banking license but retained all other permissions. In April 2018, Tandem launched fixed-term savings accounts, offering one-, two- and three-year terms through its app. === Acquisitions === In August 2017, it was announced that Tandem would fully acquire Harrods Bank, founded in 1893, in a deal that would bring a near-£200m loan book, over £300m of deposits and nearly £80 million of capital. Prior to its sale to Tandem Money, Harrods Bank catered for high-net-worth (HNW) individuals and operated from the Harrods store in Knightsbridge, London. It offered a variety of personal and business current and savings accounts, mortgages, foreign currency and gold bullion trading services. On 7 August 2017, Tandem Money Limited announced a deal to acquire 100% of Harrods Bank Limited shares. The purchase deal closed successfully on 11 January 2018. In March 2018, Tandem agreed to acquire Pariti Technologies Limited, developers of the Pariti money management application. In August 2020 Tandem acquired green home improvement loan specialists Allium Lending Group. It was announced on 8 February 2021 that Tandem had agreed to purchase the mortgage book from private bank Bank and Clients, consisting of 300 B&C customers for an undisclosed amount. In January 2022 Tandem Bank acquired consumer lender Oplo, creating a combined business with £1.2 billion of total assets. In April 2023, it was announced that Tandem had acquired money-sharing app Loop Money. At the time of the purchase, one of Loop's founders – Paul Pester – was also chairman at Tandem. == Features == Tandem Bank offers customers savings, mortgages, personal and secured loans, green home improvement loans and motor finance. In November 2022, the bank launched its new Tandem Marketplace, providing information and resources to help promote greener living.

    Read more →
  • Application-release automation

    Application-release automation

    Application-release automation (ARA) refers to the process of packaging and deploying an application or update of an application from development, across various environments, and ultimately to production. ARA solutions must combine the capabilities of deployment automation, environment management and modeling, and release coordination. == Relationship with DevOps == ARA tools help cultivate DevOps best practices by providing a combination of automation, environment modeling and workflow-management capabilities. These practices help teams deliver software rapidly, reliably and responsibly. ARA tools achieve a key DevOps goal of implementing continuous delivery with a large quantity of releases quickly. == Relationship with deployment == ARA is more than just software-deployment automation – it deploys applications using structured release-automation techniques that allow for an increase in visibility for the whole team. It combines workload automation and release-management tools as they relate to release packages, as well as movement through different environments within the DevOps pipeline. ARA tools help regulate deployments, how environments are created and deployed, and how and when releases are deployed. == ARA Solutions == All ARA solutions must include capabilities in automation, environment modeling, and release coordination. Additionally, the solution must provide this functionality without reliance on other tools.

    Read more →
  • Document-oriented database

    Document-oriented database

    A document-oriented database, or document store, is a computer program and data storage system designed for storing, retrieving, and managing document-oriented information, also known as semi-structured data. Document-oriented databases are one of the main categories of NoSQL databases, and the popularity of the term "document-oriented database" has grown alongside the adoption of NoSQL itself. XML databases are a subclass of document-oriented databases optimized for XML documents. Graph databases are similar, but add another layer, the relationship, which allows them to link documents for rapid traversal. Document-oriented databases are conceptually an extension of the key–value store, another type of NoSQL database. In key-value stores, data is treated as opaque by the database, whereas document-oriented systems exploit the internal structure of documents to extract metadata and optimize storage and queries. Although in practice the distinction can be minimal due to modern tooling, document stores are designed to provide a richer programming experience with modern programming techniques. Document databases differ significantly from traditional relational databases (RDBs). Relational databases store data in predefined tables, often requiring an object to be split across multiple tables. In contrast, document databases store all information for a given object in a single document, with each document potentially having a unique structure. This design eliminates the need for object-relational mapping when loading data into the database. == Documents == The central concept of a document-oriented database is the notion of a document. Although implementations vary in their specific definitions, document-oriented databases generally treat documents as self-contained units that encapsulate and encode data in a standardized format. Common encoding formats include XML, YAML, JSON, as well as binary representations such as BSON. Documents in a document store are equivalent to the programming concept of an object. They are not required to adhere to a fixed schema, and documents within the same collection may contain different fields or structures. Fields may be optional, and documents of the same logical type may differ in composition. For example, the following illustrates a document encoded in JSON: A second document might be encoded in XML as: The two example documents share some structural elements but also contain unique fields. The structure, text, and other data within each document are collectively referred to as the document's content and can be accessed or modified using retrieval or editing operations. Unlike relational databases, in which each record contains the same fields and unused fields are left empty, document-oriented databases do not require uniform fields across documents. This design allows new information to be added to some documents without affecting the structure of others. Document databases often support the storage of additional metadata alongside the document content. Such metadata may relate to organizational features, security, indexing, or other implementation-specific features. === CRUD operations === The core operations supported by a document-oriented database for manipulating documents are similar to those in other databases. Although terminology is not perfectly standardized, these operations are generally recognized as Create, Read, Update, and Delete (CRUD). Creation (C): Adds a new document to the database. Retrieval (R): Retrieves documents or fields based on queries. Update (U): Modifies the contents of existing documents. Deletion (D): Removes documents from the database. === Keys === Documents in a document-oriented database are addressed via a unique identifier. This identifier, often a string, URI, or path, can be used to retrieve the document from the database. Most document stores maintain an index on the key to optimize retrieval, and in some implementations the key is required when creating or inserting a new document. === Retrieval === In addition to key-based access, document-oriented databases typically provide an API or query language that enables retrieval based on document content or associated metadata. For example, a query may return all documents with a specific field matching a given value. The available query features, indexing options, and performance characteristics vary across implementations. Document stores differ from key-value stores in that they exploit the internal structure and metadata of stored documents. In many key-value stores, values are treated as opaque or "black-box" data, meaning the database system does not interpret their internal structure. By contrast, document-oriented databases can classify and interpret document content. This enables queries that distinguish between types of data––for example, retrieving all phone numbers containing "555" without also matching a postal code such as "55555." === Editing === Document databases typically provide mechanisms for updating or editing the content or metadata of a document. Updates may involve replacing the entire document or modifying individual elements or fields within the document. === Organization === Document database implementations support a variety of methods for organizing documents, including: Collections: Groups of documents. Depending on the implementation, a document may be required to belong to a single collection or may be allowed in multiple collections. Tags and non-visible metadata: Additional data stored outside the main document content. Directory hierarchies: Documents organized in a tree-like structure, often based on path or URI. These organizational structures may differ between logical and physical representations (e.g. on disk or in memory). == Relationship to other databases == === Relationship to key-value stores === A document-oriented database can be viewed as a specialized form of key-value store, which is itself a category of NoSQL database. In a basic key-value store, the stored value is typically treated as opaque by the database system. By contrast, a document-oriented database provides APIs or a query and update language that allows queries and modifications based on the internal structure of the document. For users who do not require advanced query, retrieval, or update capabilities, the distinction between document-oriented databases and key-value stores may be minimal. === Relationship to search engines === Some search engine and information retrieval systems, such as Apache Solr and Elasticsearch, provide document storage and support core document operations. As a result, they may meet certain functional definitions of a document-oriented database, although their primary design goals differ. === Relationship to relational databases === In a relational database, data is organized into predefined types represented as tables. Each table contains rows (records) with a fixed set of columns (fields), so all records in a table share the same structure. Administrators typically define indexes on selected fields to improve query performance. A central principle of relational database design is database normalization, in which data that might otherwise be repeated is stored in separate tables and linked using keys. When records in different tables are related, a foreign key is used to associate them. For example, an address book application may store a contact's name, image, phone numbers, mailing addresses, and email addresses. In a normalized relational design, separate tables might be created for contacts, phone numbers, and email addresses. The phone number table would include a foreign key referencing the associated contact. To reconstruct a complete contact record, the database retrieves related information from each table using the foreign keys and combines it into a single record. In contrast, a document-oriented database stores all data related to an object within a single document, and stored in the database as a single entry. In the address book example,the contact's name, image, and contact information may be stored together in one document. The document is retrieved using a unique key, and all related information is returned together, without needing to look up multiple tables. A key difference between the document-oriented and relational models is that the data formats are not predefined in the document case. In most cases, any sort of document can be stored in a database, and documents can change in type and form over time. For example, a new field such as COUNTRY_FLAG can be added to new documents as they are inserted without affecting existing documents. To aid retrieval, document-oriented systems generally allow the administrator to provide hints to the database for locating certain types of information. These hints work in a similar fashion to indexes in relational databases. Many systems also allow additional metadata outside the content of the document itself

    Read more →
  • Line integral convolution

    Line integral convolution

    In scientific visualization, line integral convolution (LIC) is a method to visualize a vector field (such as fluid motion) at high spatial resolutions. The LIC technique was first proposed by Brian Cabral and Leith Casey Leedom in 1993. In LIC, discrete numerical line integration is performed along the field lines (curves) of the vector field on a uniform grid. The integral operation is a convolution of a filter kernel and an input texture, often white noise. In signal processing, this process is known as a discrete convolution. == Overview == Traditional visualizations of vector fields use small arrows or lines to represent vector direction and magnitude. This method has a low spatial resolution, which limits the density of presentable data and risks obscuring characteristic features in the data. More sophisticated methods, such as streamlines and particle tracing techniques, can be more revealing but are highly dependent on proper seed points. Texture-based methods, like LIC, avoid these problems since they depict the entire vector field at point-like (pixel) resolution. Compared to other integration-based techniques that compute field lines of the input vector field, LIC has the advantage that all structural features of the vector field are displayed, without the need to adapt the start and end points of field lines to the specific vector field. In other words, it shows the topology of the vector field. In user testing, LIC was found to be particularly good for identifying critical points. == Algorithm == === Informal description === LIC causes output values to be strongly correlated along the field lines, but uncorrelated in orthogonal directions. As a result, the field lines contrast each other and stand out visually from the background. Intuitively, the process can be understood with the following example: the flow of a vector field can be visualized by overlaying a fixed, random pattern of dark and light paint. As the flow passes by the paint, the fluid picks up some of the paint's color, averaging it with the color it has already acquired. The result is a randomly striped, smeared texture where points along the same streamline tend to have a similar color. Other physical examples include: whorl patterns of paint, oil, or foam on a river visualisation of magnetic field lines using randomly distributed iron filings fine sand being blown by strong wind === Formal mathematical description === Although the input vector field and the result image are discretized, it pays to look at it from a continuous viewpoint. Let v {\displaystyle \mathbf {v} } be the vector field given in some domain Ω {\displaystyle \Omega } . Although the input vector field is typically discretized, we regard the field v {\displaystyle \mathbf {v} } as defined in every point of Ω {\displaystyle \Omega } , i.e. we assume an interpolation. Streamlines, or more generally field lines, are tangent to the vector field in each point. They end either at the boundary of Ω {\displaystyle \Omega } or at critical points where v = 0 {\displaystyle \mathbf {v} =\mathbf {0} } . For the sake of simplicity, critical points and boundaries are ignored in the following. A field line σ {\displaystyle {\boldsymbol {\sigma }}} , parametrized by arc length s {\displaystyle s} , is defined as d σ ( s ) d s = v ( σ ( s ) ) | v ( σ ( s ) ) | . {\displaystyle {\frac {d{\boldsymbol {\sigma }}(s)}{ds}}={\frac {\mathbf {v} ({\boldsymbol {\sigma }}(s))}{|\mathbf {v} ({\boldsymbol {\sigma }}(s))|}}.} Let σ r ( s ) {\displaystyle {\boldsymbol {\sigma }}_{\mathbf {r} }(s)} be the field line that passes through the point r {\displaystyle \mathbf {r} } for s = 0 {\displaystyle s=0} . Then the image gray value at r {\displaystyle \mathbf {r} } is set to D ( r ) = ∫ − L / 2 L / 2 k ( s ) N ( σ r ( s ) ) d s {\displaystyle D(\mathbf {r} )=\int _{-L/2}^{L/2}k(s)N({\boldsymbol {\sigma }}_{\mathbf {r} }(s))ds} where k ( s ) {\displaystyle k(s)} is the convolution kernel, N ( r ) {\displaystyle N(\mathbf {r} )} is the noise image, and L {\displaystyle L} is the length of field line segment that is followed. D ( r ) {\displaystyle D(\mathbf {r} )} has to be computed for each pixel in the LIC image. If carried out naively, this is quite expensive. First, the field lines have to be computed using a numerical method for solving ordinary differential equations, like a Runge–Kutta method, and then for each pixel the convolution along a field line segment has to be calculated. The final image will normally be colored in some way. Typically, some scalar field in Ω {\displaystyle \Omega } (like the vector length) is used to determine the hue, while the grayscale LIC output determines the brightness. Different choices of convolution kernels and random noise produce different textures; for example, pink noise produces a cloudy pattern where areas of higher flow stand out as smearing, suitable for weather visualization. Further refinements in the convolution can improve the quality of the image. === Programming description === Algorithmically, LIC takes a vector field and noise texture as input, and outputs a texture. The process starts by generating in the domain of the vector field a random gray level image at the desired output resolution. Then, for every pixel in this image, the forward and backward streamline of a fixed arc length is calculated. The value assigned to the current pixel is computed by a convolution of a suitable convolution kernel with the gray levels of all the noise pixels lying on a segment of this streamline. This creates a gray level LIC image. == Versions == === Basic === Basic LIC images are grayscale images, without color and animation. While such LIC images convey the direction of the field vectors, they do not indicate orientation; for stationary fields, this can be remedied by animation. Basic LIC images do not show the length of the vectors (or the strength of the field). === Color === The length of the vectors (or the strength of the field) is usually coded in color; alternatively, animation can be used. === Animation === LIC images can be animated by using a kernel that changes over time. Samples at a constant time from the streamline would still be used, but instead of averaging all pixels in a streamline with a static kernel, a ripple-like kernel constructed from a periodic function multiplied by a Hann function acting as a window (in order to prevent artifacts) is used. The periodic function is then shifted along the period to create an animation. === Fast LIC (FLIC) === The computation can be significantly accelerated by re-using parts of already computed field lines, specializing to a box function as convolution kernel k ( s ) {\displaystyle k(s)} and avoiding redundant computations during convolution. The resulting fast LIC method can be generalized to convolution kernels that are arbitrary polynomials. === Oriented Line Integral Convolution (OLIC) === Because LIC does not encode flow orientation, it cannot distinguish between streamlines of equal direction but opposite orientation. Oriented Line Integral Convolution (OLIC) solves this issue by using a ramp-like asymmetric kernel and a low-density noise texture. The kernel asymmetrically modulates the intensity along the streamline, producing a trace that encodes orientation; the low-density of the noise texture prevents smeared traces from overlapping, aiding readability. Fast Rendering of Oriented Line Integral Convolution (FROLIC) is a variation that approximates OLIC by rendering each trace in discrete steps instead of as a continuous smear. === Unsteady Flow LIC (UFLIC) === For time-dependent vector fields (unsteady flow), a variant called Unsteady Flow LIC has been designed that maintains the coherence of the flow animation. An interactive GPU-based implementation of UFLIC has been presented. === Parallel === Since the computation of an LIC image is expensive but inherently parallel, the process has been parallelized and, with availability of GPU-based implementations, interactive on PCs. === Multidimensional === Note that the domain Ω {\displaystyle \Omega } does not have to be a 2D domain: the method is applicable to higher dimensional domains using multidimensional noise fields. However, the visualization of the higher-dimensional LIC texture is problematic; one way is to use interactive exploration with 2D slices that are manually positioned and rotated. The domain Ω {\displaystyle \Omega } does not have to be flat either; the LIC texture can be computed also for arbitrarily shaped 2D surfaces in 3D space. == Applications == This technique has been applied to a wide range of problems since it first was published in 1993, both scientific and creative, including: Representing vector fields: visualization of steady (time-independent) flows (streamlines) visual exploration of 2D autonomous dynamical systems wind mapping water flow mapping Artistic effects for image generation and stylization: pencil drawing (auto

    Read more →
  • Linked timestamping

    Linked timestamping

    Linked timestamping is a type of trusted timestamping where issued time-stamps are related to each other. Each time-stamp would contain data that authenticates the time-stamp before it, the authentication would be authenticating the entire message, including the previous time-stamps authentication, making a chain. This makes it impossible to add a time-stamp in to the middle of the chain, as any time-stamps afterwards would be different. == Description == Linked timestamping creates time-stamp tokens which are dependent on each other, entangled in some authenticated data structure. Later modification of the issued time-stamps would invalidate this structure. The temporal order of issued time-stamps is also protected by this data structure, making backdating of the issued time-stamps impossible, even by the issuing server itself. The top of the authenticated data structure is generally published in some hard-to-modify and widely witnessed media, like printed newspaper or public blockchain. There are no (long-term) private keys in use, avoiding PKI-related risks. Suitable candidates for the authenticated data structure include: Linear hash chain Merkle tree (binary hash tree) Skip list The simplest linear hash chain-based time-stamping scheme is illustrated in the following diagram: The linking-based time-stamping authority (TSA) usually performs the following distinct functions: Aggregation For increased scalability the TSA might group time-stamping requests together which arrive within a short time-frame. These requests are aggregated together without retaining their temporal order and then assigned the same time value. Aggregation creates a cryptographic connection between all involved requests; the authenticating aggregate value will be used as input for the linking operation. Linking Linking creates a verifiable and ordered cryptographic link between the current and already issued time-stamp tokens. Publishing The TSA periodically publishes some links, so that all previously issued time-stamp tokens depend on the published link and that it is practically impossible to forge the published values. By publishing widely witnessed links, the TSA creates unforgeable verification points for validating all previously issued time-stamps. == Security == Linked timestamping is inherently more secure than the usual, public-key signature based time-stamping. All consequential time-stamps "seal" previously issued ones - hash chain (or other authenticated dictionary in use) could be built only in one way; modifying issued time-stamps is nearly as hard as finding a preimage for the used cryptographic hash function. Continuity of operation is observable by users; periodic publications in widely witnessed media provide extra transparency. Tampering with absolute time values could be detected by users, whose time-stamps are relatively comparable by system design. Absence of secret keys increases system trustworthiness. There are no keys to leak and hash algorithms are considered more future-proof than modular arithmetic based algorithms, e.g. RSA. Linked timestamping scales well - hashing is much faster than public key cryptography. There is no need for specific cryptographic hardware with its limitations. The common technology for guaranteeing long-term attestation value of the issued time-stamps (and digitally signed data) is periodic over-time-stamping of the time-stamp token. Because of missing key-related risks and of the plausible safety margin of the reasonably chosen hash function this over-time-stamping period of hash-linked token could be an order of magnitude longer than of public-key signed token. == Research == === Foundations === Stuart Haber and W. Scott Stornetta proposed in 1990 to link issued time-stamps together into linear hash-chain, using a collision-resistant hash function. The main rationale was to diminish TSA trust requirements. Tree-like schemes and operating in rounds were proposed by Benaloh and de Mare in 1991 and by Bayer, Haber and Stornetta in 1992. Benaloh and de Mare constructed a one-way accumulator in 1994 and proposed its use in time-stamping. When used for aggregation, one-way accumulator requires only one constant-time computation for round membership verification. Surety started the first commercial linked timestamping service in January 1995. Linking scheme is described and its security is analyzed in the following article by Haber and Sornetta. Buldas et al. continued with further optimization and formal analysis of binary tree and threaded tree based schemes. Skip-list based time-stamping system was implemented in 2005; related algorithms are quite efficient. === Provable security === Security proof for hash-function based time-stamping schemes was presented by Buldas, Saarepera in 2004. There is an explicit upper bound N {\displaystyle N} for the number of time stamps issued during the aggregation period; it is suggested that it is probably impossible to prove the security without this explicit bound - the so-called black-box reductions will fail in this task. Considering that all known practically relevant and efficient security proofs are black-box, this negative result is quite strong. Next, in 2005 it was shown that bounded time-stamping schemes with a trusted audit party (who periodically reviews the list of all time-stamps issued during an aggregation period) can be made universally composable - they remain secure in arbitrary environments (compositions with other protocols and other instances of the time-stamping protocol itself). Buldas, Laur showed in 2007 that bounded time-stamping schemes are secure in a very strong sense - they satisfy the so-called "knowledge-binding" condition. The security guarantee offered by Buldas, Saarepera in 2004 is improved by diminishing the security loss coefficient from N {\displaystyle N} to N {\displaystyle {\sqrt {N}}} . The hash functions used in the secure time-stamping schemes do not necessarily have to be collision-resistant or even one-way; secure time-stamping schemes are probably possible even in the presence of a universal collision-finding algorithm (i.e. universal and attacking program that is able to find collisions for any hash function). This suggests that it is possible to find even stronger proofs based on some other properties of the hash functions. At the illustration above hash tree based time-stamping system works in rounds ( t {\displaystyle t} , t + 1 {\displaystyle t+1} , t + 2 {\displaystyle t+2} , ...), with one aggregation tree per round. Capacity of the system ( N {\displaystyle N} ) is determined by the tree size ( N = 2 l {\displaystyle N=2^{l}} , where l {\displaystyle l} denotes binary tree depth). Current security proofs work on the assumption that there is a hard limit of the aggregation tree size, possibly enforced by the subtree length restriction. == Standards == ISO 18014 part 3 covers 'Mechanisms producing linked tokens'. American National Standard for Financial Services, "Trusted Timestamp Management and Security" (ANSI ASC X9.95 Standard) from June 2005 covers linking-based and hybrid time-stamping schemes. There is no IETF RFC or standard draft about linking based time-stamping. RFC 4998 (Evidence Record Syntax) encompasses hash tree and time-stamp as an integrity guarantee for long-term archiving.

    Read more →
  • Seam carving

    Seam carving

    Seam carving (or liquid rescaling) is an algorithm for content-aware image resizing, developed by Shai Avidan, of Mitsubishi Electric Research Laboratories (MERL), and Ariel Shamir, of the Interdisciplinary Center and MERL. It functions by establishing a number of seams (paths of least importance) in an image and automatically removes seams to reduce image size or inserts seams to extend it. Seam carving also allows manually defining areas in which pixels may not be modified, and features the ability to remove whole objects from photographs. The purpose of the algorithm is image retargeting, which is the problem of displaying images without distortion on media of various sizes (cell phones, projection screens) using document standards, like HTML, that already support dynamic changes in page layout and text but not images. Image Retargeting was invented by Vidya Setlur, Saeko Takage, Ramesh Raskar, Michael Gleicher and Bruce Gooch in 2005. The work by Setlur et al. won the 10-year impact award in 2015. == Seams == Seams can be either vertical or horizontal. A vertical seam is a path of pixels connected from top to bottom in an image with one pixel in each row. A horizontal seam is similar with the exception of the connection being from left to right. The importance/energy function values a pixel by measuring its contrast with its neighbor pixels. == Process == The below example describes the process of seam carving: The seams to remove depends only on the dimension (height or width) one wants to shrink. It is also possible to invert step 4 so the algorithm enlarges in one dimension by copying a low energy seam and averaging its pixels with its neighbors. === Computing seams === Computing a seam consists of finding a path of minimum energy cost from one end of the image to another. This can be done via Dijkstra's algorithm, dynamic programming, greedy algorithm or graph cuts among others. ==== Dynamic programming ==== Dynamic programming is a programming method that stores the results of sub-calculations in order to simplify calculating a more complex result. Dynamic programming can be used to compute seams. If attempting to compute a vertical seam (path) of lowest energy, for each pixel in a row we compute the energy of the current pixel plus the energy of one of the three possible pixels above it. The images below depict a DP process to compute one optimal seam. Each square represents a pixel, with the top-left value in red representing the energy value of that pixel. The value in black represents the cumulative sum of energies leading up to and including that pixel. The energy calculation is trivially parallelized for simple functions. The calculation of the DP array can also be parallelized with some interprocess communication. However, the problem of making multiple seams at the same time is harder for two reasons: the energy needs to be regenerated for each removal for correctness and simply tracing back multiple seams can form overlaps. Avidan 2007 computes all seams by removing each seam iteratively and storing an "index map" to record all the seams generated. The map holds a "nth seam" number for each pixel on the image, and can be used later for size adjustment. If one ignores both issues however, a greedy approximation for parallel seam carving is possible. To do so, one starts with the minimum-energy pixel at one end, and keep choosing the minimum energy path to the other end. The used pixels are marked so that they are not picked again. Local seams can also be computed for smaller parts of the image in parallel for a good approximation. == Issues == The algorithm may need user-provided information to reduce errors. This can consist of painting the regions which are to be preserved. With human faces it is possible to use face detection. Sometimes the algorithm, by removing a low energy seam, may end up inadvertently creating a seam of higher energy. The solution to this is to simulate a removal of a seam, and then check the energy delta to see if the energy increases (forward energy). If it does, prefer other seams instead. == Implementations == Adobe Systems acquired a non-exclusive license to seam carving technology from MERL, and implemented it as a feature in Photoshop CS4, where it is called Content Aware Scaling. As the license is non-exclusive, other popular computer graphics applications (e. g. GIMP, digiKam, and ImageMagick) as well as some stand-alone programs (e. g. iResizer) also have implementations of this technique, some of which are released as free and open source software. There also exists an implementation for webpages. == Improvements and extensions == Better energy function and application to video by introducing 2D (time+1D) seams. Faster implementation on GPU. Application of this forward energy function to static images. Multi-operator: Combine with cropping and scaling. Much faster removal of multiple seams. Removing seams through neural deformation fields to extend to continuous domains like 3D scenes. A 2010 review of eight image retargeting methods found that seam carving produced output that was ranked among the worst of the tested algorithms. It was, however, a part of one of the highest-ranking algorithms: the multi-operator extension mentioned above (combined with cropping and scaling).

    Read more →
  • Camfecting

    Camfecting

    In computer security, camfecting is the process of attempting to hack into a person's webcam and activate it without the webcam owner's permission. The remotely activated webcam can be used to watch anything within the webcam's field of vision, sometimes including the webcam owner themselves. Camfecting is most often carried out by infecting the victim's computer with a virus that can provide the hacker access to their webcam. This attack is specifically targeted at the victim's webcam, and hence the name camfecting, a portmanteau of the words camera and infecting. Typically, a webcam hacker or a camfecter sends his victim an innocent-looking application which has a hidden Trojan software through which the camfecter can control the victim's webcam. The camfecter virus installs itself silently when the victim runs the original application. Once installed, the camfecter can turn on the webcam and capture pictures/videos. The camfecter software works just like the original webcam software present in the victim computer, the only difference being that the camfecter controls the software instead of the webcam's owner. == Notable cases == Marcus Thomas, former assistant director of the FBI's Operational Technology Division in Quantico, said in a 2013 story in The Washington Post that the FBI had been able to covertly activate a computer's camera—without triggering the light that lets users know it is recording—for several years. In November 2013, American teenager Jared James Abrahams pleaded guilty to hacking over 100-150 women and installing the highly invasive malware Blackshades on their computers in order to obtain nude images and videos of them. One of his victims was Miss Teen USA 2013 Cassidy Wolf. Researchers from Johns Hopkins University have shown how to covertly capture images from the iSight camera on MacBook and iMac models released before 2008, by reprogramming the microcontroller's firmware. == Prevention == A computer that does not have an up-to-date webcam software or any anti-virus (or firewall) software installed and operational may be at increased risk for camfecting from different types of malware. Softcams may nominally increase this risk, if not maintained or configured properly. Although a person cannot protect themselves from zero-day exploits that could potentially activate a camera unknowingly, such as Pegasus is able to do on smartphones. The only way to truly avoid being watched through your own camera is by blocking it physically, since software blocks can be overriden by advanced persistent threats. A simple piece of tape is more commonly used to offuscate the feed of the camera. With even Mark Zuckerberg doing so on his personal laptop that appeared during a presentation. And it being the way Snowden, an ex-contractor for the NSA, is portrayed to do so to prevent camfecting in the biopic Snowden. There is now a market for the manufacture and sale of sliding lens covers that allow users to physically block their computer's camera and, in some cases, microphone. A number of phone and laptop manufacturers tried to implement pop-up cameras that can only be opened manually by the user. But the trend did not become mainstream because of the engineering it took to keep the mechanisms up to date, aswell as the fragility and durability of the cameras.

    Read more →
  • Human Race Machine

    Human Race Machine

    The Human Race Machine (HRM) is a computerized console composed of four different programs. The Human Race Machine program allows participants to see themselves with the facial characteristics of six different races: Asian, White, African, Middle Eastern, and Indian, mapped onto their own face. The Age Machine allows viewers see an aged version of his or her face. A version of this methodology has been used for over twenty years by the FBI and the National Center for Missing and Exploited Children to help locate kidnap victims and missing children. The Couples Machine combines photographs of two people in different percentages to show the appearance of their child. The Anomaly Machine lets viewers see themselves with facial anomalies. The HRM was created by artist Nancy Burson and David Kramlich; it uses morphing technology. It was shown on Oprah on 2006-02-16.

    Read more →
  • Threat actor

    Threat actor

    In cybersecurity and risk assessment, a threat actor (or threat agents, attackers, or adversaries) is a person, group, organisation, state, or other entity with the ability to cause, carry, transmit, support, or exploit a threat. Threat actors are commonly analysed according to their motivations, resources, technical capability, access to systems, relationship to a target, and degree of connection to state authority. They may exploit vulnerabilities, conduct social engineering, steal or monetise data, disrupt operations, or support other actors who carry out such activity. Because the term covers a wide range of actors, researchers and security organisations use taxonomies that distinguish between groups such as cybercriminals, state-linked actors, ideologically motivated actors, thrill seekers or trolls, insiders, and competitors. Threat actor classifications are used in risk management, cyber threat intelligence, and incident response to connect observed behaviour with possible objectives and likely future activity. The categories are not always mutually exclusive: the same actor may combine criminal, ideological, commercial, or state-linked motivations, and different organisations may use different names for similar actors. == Risk assessment and security management == In risk assessment, threat actor analysis is used to identify who or what may create, carry, transmit, support, or exploit a threat, and how that actor relates to the system being assessed. Rausand and Haugen classify threat actors by their relationship to the system, distinguishing between internal and external actors, and by intent, distinguishing between intentional and unintentional actors. Threat actor classification may also support incident investigation. Rogers argued that actor categories could be inferred from observable case points, such as tools used, messages left, data targeted, forensic knowledge, and the degree of damage, allowing investigators to assess likely motivation and skill level. Later work similarly linked actor classification to operational analysis. Chng, Lu, Kumar and Yau proposed a framework connecting hacker types, motivations and typical strategies, arguing that observed behaviour before or during an attack can help analysts infer the likely type of actor involved. At the strategic level, actor analysis may consider an actor's resources, capabilities, degree of state involvement, motivations and objectives. == Landscape == The United Nations Institute for Disarmament Research has described the contemporary cyberthreat landscape as involving an increasingly diverse and interconnected set of actors, including state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, private companies and civilian volunteers. Its 2026 report argued that these actors vary in resources, technical sophistication and relationships with states, making it traditional distinctions between state, civilian combatant roles, and legitimate and illegitimate conduct harder to apply. == Academic taxonomies == Early taxonomies classified hackers by activity, skill, motivation, or criminal profile. Landreth proposed six categories based on activity: novice, student, tourist, crasher, and thief. Hollinger classified computer misuse into pirates, browsers, and crackers, describing a progression from less-skilled activity to more technically serious offences. Chantler used attributes including activity, skill, knowledge, motivation, and duration of involvement to distinguish between an elite group, neophytes, and "losers and lamers". Parker proposed seven profiles of cybercriminals: pranksters, hacksters, malicious hackers, personal problem solvers, career criminals, extreme advocates, and malcontents, addicts, and irrational or incompetent people. In 2000, Marc Rogers proposed a taxonomy of hackers with seven, non-mutually-exclusive categories: newbie/tool kit users, cyber-punks, internals, coders, old guard hackers, professional criminals, and cyber-terrorists. Rausand and Haugen distinguish between internal and external threat actors, and between intentional and unintentional threat actors. Internal actors have some relationship with, access to, or position inside the system or organisation, while external actors operate from outside it. Intentional actors seek to create, exploit, or support a threat event, whereas unintentional actors may cause or enable a threat event through error, negligence, accident, or lack of awareness. Rogers later revised his hacker taxonomy into Novices, Cyber-punks, Internals, Petty Thieves, Virus Writers, Old Guard hackers, Professional Criminals, Information Warriors, and, more tentatively, Political Activists. In the model, motivation is grouped into four broad domains: curiosity, notoriety, revenge, and financial gain. A 2022 review by Chng, Lu, Kumar and Yau examined 11 hacker typologies published over three decades and proposed a unified framework linking hacker types, motivations, and strategies. The framework identified 13 hacker types and seven motivations, and argued that observed strategies during an attack can help analysts infer the likely type of actor involved. == Government taxonomies == Taxonomies of threat actors by governments are much more likely to include state-level threat actors. In the United States the National Institute of Standards and Technology (NIST) uses the term threat source in its risk-assessment guidance: organisations are directed to identify and characterise threat sources of concern, including capability, intent and targeting for adversarial threat sources, and the range of effects for non-adversarial threat sources. NIST treats threat-source identification as part of the risk-assessment process, alongside identifying threat events, vulnerabilities, likelihood and impact. In the EU, European Union Agency for Cybersecurity publishes the annual ENISA Threat Landscape, which analyses cyber incidents and adversary behaviour affecting the European Union. The 2025 report analysed selected incidents from the previous year and grouped activity around cybercrime, state-aligned activity, foreign information manipulation and interference, and hacktivism. In ENISA's 2025 analysis, hacktivist activity dominated reporting, representing almost 80% of recorded incidents and consisting mainly of low-level distributed denial-of-service operations. ENISA also reported increasing convergence between hacktivism, cybercrime and state-nexus activity, including state-aligned use of hacktivist personas, hacktivist adoption of ransomware, and false-flag or impersonation activity. At the UN level, A 2026 report by the United Nations Institute for Disarmament Research described the cyberthreat landscape as involving state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, and civilian volunteers, with actors varying in resources, technical sophistication, and links to states. Canada defines threat actors as states, groups, or individuals who aim to cause harm by exploiting a vulnerability with malicious intent. A threat actor must be trying to gain access to information systems to access or alter data, devices, systems, or networks. The Japanese government's National Centre of Incident Readiness and Strategy (NISC) was established in 2015 to create a "free, fair and secure cyberspace" in Japan. The NICS created a cybersecurity strategy in 2018 that outlines nation-states and cybercrime to be some of the most key threats. It also indicates that terrorist usage of the cyberspace needs to be monitored and understood. The Security Council of the Russian Federation published the cyber security strategy doctrine in 2016. This strategy highlights the following threat actors as a risk to cyber security measures: nation-state actors, cyber criminals, and terrorists. == Techniques == Threat actors use techniques like Social engineering (security), and Phishing, alongside technical exploits like Cross-site scripting, SQL injection, and denial-of-service attacks. == Limitations == In practice, actor categories may overlap (Edward Snowden for example), and the same activity may combine features associated with hacktivism, cybercrime and state-linked operations. The lines between hacktivism, cybercrime and state-nexus activity had continued to blur, with shared toolsets, overlapping methods, fake personas, hacktivist adoption of ransomware, and cybercriminal or state-linked actors masquerading as other groups. Threat actor analysis also has limits as a risk-management method. NIST notes that risk assessments depend on their purpose, scope, assumptions, constraints, information sources, risk model and analytic approach, and that assessments are tied to particular time frames and organisational contexts. NIST also warns that simple threat-vulnerability pairing may be undesirable or problematic where there are many threats and vulnerabilities, and recom

    Read more →
  • Google Gadgets

    Google Gadgets

    Google Gadgets are dynamic web content that can be embedded on a web page. They can be added to and interact strongly with Google's iGoogle personalized home page (discontinued in November 2013, although iGoogle Gadgets still work on other websites) and the Google Desktop (discontinued in September 2011) application, as well as Google Wave (also no longer supported by Google) and Google Sites. Webmasters can add and customize a gadget to their own business or personal web site, a process called "syndication". Gadgets are developed by Google and third-party developers using the Google Gadgets API, using basic web technologies such as XML and JavaScript. == Multi-user persistent - Wave Gadgets == With the advent of Google Wave (now Apache Wave), gadgets became able to have persistent storage and multi-user capabilities and better state management. Gadgets using Google Wave in this way were simply known as 'Wave Gadgets'. For instance, a game written using a Google Gadget could use Google Wave technology to record a list of users and high scores without having to worry about how to permanently store the scores on a hosted server. The use of Google Wave would give the gadget multi-user and permanent storage capabilities. For example, scores could be stored in a Google Wave hosted permanently by Google at no cost to the user. As of early 2013, Google Gadgets were deprecated in Google Spreadsheets. Shortly after, they were removed from all spreadsheets. == Technology == Google Gadgets are written in XML and can have HTML and JavaScript components, and were able to use Google Wave. Here is an example of a Hello World program written using Google Gadget technology. Google Gadgets API is a Google API which allows developers to create Google Gadgets easily.

    Read more →
  • Central Equipment Identity Register

    Central Equipment Identity Register

    A Central Equipment Identity Register (CEIR) is a database of mobile equipment identifiers (IMEI – for networks of GSM standard, MEID – for networks of CDMA standard). Such an identifier is assigned to each SIM slot of the mobile device. Different kinds of IMEIs could be, White, for devices that are allowed to register in the cellular network; Black, for devices that are prohibited to register in the cellular network; and Grey, for devices in intermediate status (when it is not yet defined in which of the lists - black or white - the device should be placed). Depending on the rules of mobile equipment registration in a country the CEIR database may contain other lists or fields beside IMEI. For example, the subscriber number (MSISDN), which is bound to the IMEI, the ID of the individual (passport data, National ID, etc.) who registered IMEI in the database, details of the importer who brought the device into the country, etc. == History == Originally abbreviation CEIR stood for IMEI Database, created and provided by GSM Association. It was proposed to blacklist the IMEIs of stolen or lost phones. It was assumed that any MNO would be able to receive this list to block the registration of such devices on their network. Thus, it turns out that a stolen phone, once blacklisted by the GSMA CEIR, cannot be used on a large number of cellular networks, which means that the theft of mobile devices will become meaningless. However, it soon became clear that the MNOs on their initiative were not going to do this because if many phones stopped working in their networks, but works in another, it puts them at a disadvantage and can lead to an outflow of subscribers. It became clear that the blocking of stolen devices should be introduced simultaneously in all mobile networks of the country by legislative measures at the initiative of the communications regulator. In this case, as a rule, a national IMEI database is created, which contains general lists of blocked IMEIs. Since the registration in the cellular operator's network is directly blocked by a network node called EIR (Equipment Identity Register), the system that contains the national IMEI base became known as Central EIR (CEIR). To avoid confusion the database of GSM Association was renamed to IMEI Database - IMEI DB (it was in 2003-2008, see “Document History” at IMEI Database File Format Specification). Also sometimes a common IMEI database for several EIRs is called SEIR (Shared EIR). In each country, the CEIR can interact with IMEI DB differently. National CEIR may not communicate with IMEI DB at all. Firstly, it is separately decided whether CEIR will send information about its blacklist to IMEI DB (which IMEIs are placed in it or removed from there). Secondly, upon receipt of the blacklist from IMEI DB, the regulator decides from which countries it will receive it (IMEI DB stores the information exactly who blacklisted the IMEI). For example, you can get a list from neighboring countries, from countries in your region, from around the world. In addition to the blacklist, the GSMA is developing a list of IMEIs allocated to manufacturers for use in their devices. The manufacturer for each new device model gets at least one TAC (Type Allocation Code) allocated by GSMA, consisting of 8 digits, to which he can add a 6-digit serial number to obtain the IMEI. Thus, with one TAC, a manufacturer can release up to 1 million devices with a unique IMEI. Usually, CEIR receives a list of allocated TACs from the GSMA, since if the first 8 digits of the IMEI of a device are not in this list, this is a sign that it is counterfeit. If the central database of identifiers does not work with GSM networks, but with CDMA, then for the same purposes it is necessary to interact with another worldwide database that contains MEIDs – MEID Database. A system that directly blocks the registration of a mobile device on a cellular network – EIR. Each MNO must have at least one EIR, to which IMEI check requests (CheckIMEI) are sent when registering a device on the network. A typical EIR and CERI interaction scheme: The CEIR accumulates black, white, and grey lists using various data sources and verification methods. These lists are periodically transmitted to all EIRs. EIR uses them when processing every CheckIMEI request to determine whether to allow the device on the network or not. EIR can transmit some data to the CEIR database too. Usually, changes in a grey list – new IMEIs on the network that are not in any list – are transmitted from EIR to CEIR. In addition to synchronizing lists across multiple networks, the main function of CEIR is to implement the scenarios of changes at these lists. This usually requires interaction with various IT systems (databases) of other organizations and/or with subscribers. Еxamples of such scenarios: Whitelisting the IMEI of devices imported by the legal entity Whitelisting the IMEI of devices manufactured domestically Whitelisting the IMEI of devices imported by individual Blacklisting the IMEI of stolen/lost devices Binding IMEI to the subscriber's number and, vice versa, unbinding IMEI from the subscriber == System implementation results == The goals and results of CEIR implementation in a country are usually: Reducing mobile phone theft Reducing the import of devices stolen in other countries Reducing the presence of counterfeit devices on the market (null IMEI, incorrect IMEI, changed IMEI) Reducing illegal imports of mobile devices (increase in the collection of customs duties) Additionally, CEIR most often contributes to the solution of such problems: Combating various mobile fraud schemes Obtaining more accurate statistics on the state of the mobile communications market for the regulator Fight against terrorism (the ability to block the device at once in all mobile networks of the country). Known results achieved in some countries: Great Britain – reducing mobile phone theft. Turkey – reducing mobile phone theft, decreasing the current account deficit of Turkey and maximizing tax revenues. Uzbekistan – preventing black import of mobile devices by 98%, increase in revenues from the import of mobile devices by 700%. Kenya – disposing the market of counterfeit mobile equipment. Azerbaijan – disposing the market of counterfeit mobile equipment. Ukraine – increasing of legally imported mobile devices by 95%, increase in revenues from the import of mobile devices. == CEIR and EIR manufacturers == Some countries have used local developers to implement CEIR for their country (Great Britain, Turkey, India, and Azerbaijan). EIR is a system that is standardized in a 2G-5G networks. Such system may be established at mobile network even it doesn’t use black list and there are no CEIR in a country. Some developers of MNO’s signal core include EIR in a complex solution. However, its standard capabilities are usually lacking for specific requirements when implementing CEIR.

    Read more →
  • Screen space directional occlusion

    Screen space directional occlusion

    Screen space directional occlusion (SSDO) is a computer graphics technique enhancing screen space ambient occlusion (SSAO) by taking direction into account to sample the ambient light (both the light coming directly at an object, as well as the light reflected off of the object directly behind it), to better approximate global illumination. SSDO was introduced by Tobias Ritschel, Thorsten Grosch, and Hans-Peter Seidel in their 2009 ACM Symposium on Interactive 3D Graphics and Games paper Approximating dynamic global illumination in image space, which describes it as extending SSAO to directional occlusion with one diffuse indirect bounce of light; later literature notes that SSDO still suffers from common screen-space artifacts such as noise and banding. == Method == The original SSDO paper describes a two-pass screen-space approach, with one pass for direct lighting and a second pass for indirect bounces. Later literature describes SSDO as assuming a general shadowing direction that allows color bleeding and a single light bounce.

    Read more →