AI Email Free Generator

AI Email Free Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Key frame

    Key frame

    In animation and filmmaking, a key frame (or keyframe) is a drawing or shot that defines the starting and ending points of a smooth transition. These are called frames because their position in time is measured in frames on a strip of film or on a digital video editing timeline. A sequence of key frames defines which movement the viewer will see, whereas the position of the key frames on the film, video, or animation defines the timing of the movement. Because only two or three key frames over the span of a second do not create the illusion of movement, the remaining frames are filled with "inbetweens". == Use of key frames as a means to change parameters == In software packages that support animation, especially 3D graphics, there are many parameters that can be changed for any one object. One example of such an object is a light. In 3D graphics, lights function similarly to real-world lights. They cause illumination, cast shadows, and create specular highlights. Lights have many parameters, including light intensity, beam size, light color, and the texture cast by the light. Supposing that an animator wants the beam size to change smoothly from one value to another within a predefined period of time, that could be achieved by using key frames. At the start of the animation, a beam size value is set. Another value is set for the end of the animation. Thus, the software program automatically interpolates the two values, creating a smooth transition. == Video editing == In non-linear digital video editing, as well as in video compositing software, a key frame is a frame used to indicate the beginning or end of a change made to a parameter. For example, a key frame could be set to indicate the point at which audio will have faded up or down to a certain level. == Video compression == In video compression, a key frame, also known as an intra-frame, is a frame in which a complete image is stored in the data stream. In video compression, only changes that occur from one frame to the next are stored in the data stream, in order to greatly reduce the amount of information that must be stored. This technique capitalizes on the fact that most video sources (such as a typical movie) have only small changes in the image from one frame to the next. Whenever a drastic change to the image occurs, such as when switching from one camera shot to another or at a scene change, a key frame must be created. The entire image for the frame must be output when the visual difference between the two frames is so great that representing the new image incrementally from the previous frame would require more data than recreating the whole image. Because video compression only stores incremental changes between frames (except for key frames), it is not possible to fast-forward or rewind to any arbitrary spot in the video stream. That is because the data for a given frame only represents how that frame was different from the preceding one. For that reason, it is beneficial to include key frames at arbitrary intervals while encoding video. For example, a key frame may be output once for each 10 seconds of video, even though the video image does not change enough visually to warrant the automatic creation of the key frame. That would allow seeking within the video stream at a minimum of 10-second intervals. The downside is that the resulting video stream will be larger in disk size because many key frames are added when they are not necessary for the frame's visual representation. This drawback, however, does not produce significant compression loss when the bitrate is already set at a high value for better quality (as in the DVD MPEG-2 format).

    Read more →
  • Nanosemantics

    Nanosemantics

    Nanosemantics Lab is a Russian IT company specializing in natural language processing (NLP), computer vision (CV), speech technologies (ASR/TTS) and creation of interactive dialog interfaces, particularly chatbots and virtual assistants, based on artificial intelligence (AI). The company uses neural network platforms, including its own-made platform PuzzleLib which works on Russian-made microprocessor architecture Elbrus and Russia-based Astra Linux operating system. The company was founded in 2005 by Igor Ashmanov and Natalya Kaspersky. == Profile == The company was one of the first on Russian market to develop dialog interfaces for different branches of businesses, as well as to support community of AI developers. The company's most demanded product, as for beginning of the 2020s, is the automated "online advisers", functioning as chat bots, made for helping customers with usage of commercial products. In 2009 the company released an online service called iii.ru, where visitors were able to create their own AI-based virtual personalities entitles "infs" (for free). A visitor was able to train its own "inf" and let them chat to other "live" visitors as well with other "infs". More than 2.3 million of "infs" were created and trained by visitors over several years. Nanosemantics Lab maintains its own linguistic programming language for AI development called Dialog Language (DL). Popular social networks and instant messaging services may be used as base platforms. Nanosemantics' AI bots support different types of businesses: banks and financial services, telecommunications, retail, travel and automobile industry, home appliances production, etc. Among its solutions, Nanosemantics lists projects for various companies and institutions, among them VTB, Beeline, MTS, Sberbank, Higher School of Economics, Webmoney, Gazpromneft, Rostelecom, Ford Motors, Ministry of Health of the Russian Federation and others. The company uses the term "inf" for naming its numerous types of chat bots. The term was coined by co-founder Igor Ashmanov, head of Ashmanov & Partners. A 2014 scholarly research at Higher School of Economics, called "Basics of Business Informatics", states that such "infs", when used at business, may lower load on employees, collect statistics useful for understanding market demand and also may increase customer loyalty by providing fast and informative answers due to usage of large databases. The same research describes Nanosemantics' project for Russian branch of Ford Motors company, when AI capabilities were used for promoting the car model Ford Kuga. The research pointed out that within 2 months since beginning, the promo-website conducted 47774 talks of visitors with the specialized "inf", which indicated several hundred thousand of questions and the longest chat lasted for 3 hours 10 minutes. One-year promo campaign showed that 28.6% of people who made pre-orders talked to an "inf". In 2016 Nanosemantics launched a SaaS platform aimed at creating customized virtual assistants by users. The company's flagship product is considered to be Dialog Operating System (DialogOS), a professional corporate platform for creating intellectual voice and textual bots. It has its own linguistic programming language for creation of flexible scenarios and ready-studied neural natural language processing modules that are able to understand human interlocutors. In 2021 the company presented technology called NLab Speech ASR which contains a set of neural-networking algorithms for processing audio signals and analysis of texts that were trained and calibrated using speech-based big data marked up manually. The technology allows speed of processing of data up to "6 real-time factor" and precision values in noisy audio data may exceed 82%. In March 2022 the technology was included in Russia's Joint Registry for Russian Programs for Computers and Databases. As well, another technology was included: NLab Speech TTS, which is text-to-speech system that produces synthesized speech from printed text. == Joint projects == Nanosemantics participates in Ashmanov & Partners' projects related to AI. Since 2014, it helps in development of hardware "personal assistant" called Lexy, a solution similar to Amazon Alexa and the analogues. In August 2019 it was announced that Nanosemantics is going to participate in creation of open operating system for creating automated voice assistants. The project was called SOVA (Smart Open Virtual Assistant) and received investment of 300 million roubles (~$4,6 million) from Russian state-maintained National Technological Initiative. The company maintains long-term partnerships with Skolkovo Innovation Center (resident of IT cluster), branch association "Neuronet" and Yandex. Together with USA-based startup Remedy Logic, Nanosemantics has developed a medical diagnostic system for finding, using AI, spinal pathologies in tomography images of human bodies. Among them: central, foraminal and lateral lumbar stenosis, hernias, arthrosis. The system offers options of treatment. Since August 2021 the company is the resident of Technology Valley of Moscow State University. Also in 2021, Nanosemantics became a member of Committee on Artificial Intelligence within the Russian Association of Software Developers "Native Soft". The company states as one of its missions support of initiatives aimed at preservation and development of the Russian language. In May 2021, together with Pushkin Institute, the company created a chat bot called Phil, that explains to Russian people meaning of different Russian neologisms, and offers synonyms for them. Bot's vocabulary contains more than 500 neologisms, as well the bot can give advice on jargonisms and other types of specific words. Also in 2021, Nanosemanics Lab has signed the first-ever Russian "Codex of ethics of artificial intelligence". It establishes guidelines for ethical behavior of businesses that implement AI-based solutions. === IT contests === The company regularly organizes All-Russian Turing Test competitions for IT developers. Some of these events are co-organized with Microsoft. During the competitions, judges randomly choose virtual interlocutor and have a short conversation with them. They have to determine if a human or a machine is talking to them. An interlocutor may be either a bot or its human creator or operator. The results are measured in per cent of judges that were successfully convinced by a machine that it was a human. In 2021 Nanosemantics took part in federal project "Artificial Intelligence" by National Technological Initiative. In December 2021 the company together with state enterprise "Resource Center of Universal Design and Rehabilitation Technologies" (RCUD-RT) held an all-Russian hackathon aimed at development of AI solutions for medicine. During 3 days, participants created several training programs for patients with speech disorders. In April 2022, another hackathon by Nanosemantics was held together with MIREA – Russian Technological University. Students were participating and trying to generate algorithms for voice deepfakes. 17 teams contested in creation of software that generated artificial voice of a certain person. == Recognition == Since its foundation, Nanosemantics Lab has received a number of recognitions and awards. Among them are several professional ROTOR awards for the website iii.ru (created in 2009). The website gives the general public the means to create and train virtual assistants, which can then be used on a website or integrated into social networks. In 2013, a virtual assistant called Dana, created for Beeline Kazakhstan, was awarded with professional prize "Crystal Headset" in nomination "the best applying of technology". In 2015, the RBTH international media service included Nanosemantics in its list of "Top 50 Startups" in Russia. In 2016, the company received Russian state-maintained award called Runet Prize in two nominations: "State and Society" and "Technology and Innovation". In 2021, in Velikiy Novgorod, Nanosemantics team has won a hackathon aimed at finding means of discovering corruption schemes in Russian laws. In February 2022 the company won another contest by National Technological Initiative, called "Prochtenie", aimed at creation of AI systems for checking schoolchildren's school essays. The Nanosemantics team was awarded 20 million rubles for "overcoming technological barrier" in contest dedicated to English language, and 12 million for 1st place in special nomination "Structure" in Russian-language essay contest.

    Read more →
  • Residual neural network

    Residual neural network

    A residual neural network (also referred to as a residual network or ResNet) is a deep learning architecture in which the layers learn residual functions with reference to the layer inputs. It was developed in 2015 for image recognition, and won the ImageNet Large Scale Visual Recognition Challenge (ILSVRC) of that year. As a point of terminology, "residual connection" refers to the specific architectural motif of x ↦ f ( x ) + x {\displaystyle x\mapsto f(x)+x} , where f {\displaystyle f} is an arbitrary neural network module. The motif had been used previously (see §History for details). However, the publication of ResNet made it widely popular for feedforward networks, appearing in neural networks that are seemingly unrelated to ResNet. The residual connection stabilizes the training and convergence of deep neural networks with hundreds of layers, and is a common motif in deep neural networks, such as transformer models (e.g., BERT, and GPT models such as ChatGPT), the AlphaGo Zero system, the AlphaStar system, and the AlphaFold system. == Mathematics == === Residual connection === In a multilayer neural network model, consider a (non-residual) subnetwork with a certain number of stacked layers (e.g., 2 or 3). Let H ( x ; α ) {\displaystyle H(x;\alpha )} denote the subnetwork. Suppose H ∗ {\displaystyle H^{}} is the desired optimal output of this subnetwork. Residual learning simply adds x {\displaystyle x} directly to the output, such that the optimal learned output now becomes be H ∗ − x {\displaystyle H^{}-x} , which is interpreted as a "residual" with respect to x {\displaystyle x} . The operation of "adding x {\displaystyle x} " is implemented via a "skip connection" that performs an identity mapping to connect the input of the subnetwork with its output. This connection is referred to as a "residual connection" in later work. Let F ( x ; α ) = H ( x ; a ) + x {\displaystyle F(x;\alpha )=H(x;a)+x} . The function F {\displaystyle F} is often represented by matrix multiplication interlaced with activation functions and normalization operations (e.g., batch normalization or layer normalization). As a whole, one of these subnetworks is referred to as a "residual block". A deep residual network is constructed by simply stacking these blocks. Long short-term memory (LSTM) has a memory mechanism that serves as a residual connection. In an LSTM without a forget gate, an input x t {\displaystyle x_{t}} is processed by a function F {\displaystyle F} and added to a memory cell c t {\displaystyle c_{t}} , resulting in c t + 1 = c t + F ( x t ) {\displaystyle c_{t+1}=c_{t}+F(x_{t})} . An LSTM with a forget gate essentially functions as a highway network. To stabilize the variance of the layers' inputs, it is recommended to replace the residual connections x + f ( x ) {\displaystyle x+f(x)} with x / L + f ( x ) {\displaystyle x/L+f(x)} , where L {\displaystyle L} is the total number of residual layers. === Projection connection === If the function F {\displaystyle F} is of type F : R n → R m {\displaystyle F:\mathbb {R} ^{n}\to \mathbb {R} ^{m}} where n ≠ m {\displaystyle n\neq m} , then F ( x ) + x {\displaystyle F(x)+x} is undefined. To handle this special case, a projection connection is used: y = F ( x ) + P ( x ) {\displaystyle y=F(x)+P(x)} where P {\displaystyle P} is typically a linear projection, defined by P ( x ) = M x {\displaystyle P(x)=Mx} where M {\displaystyle M} is a m × n {\displaystyle m\times n} matrix. The matrix is trained via backpropagation, as is any other parameter of the model. === Signal propagation === The introduction of identity mappings facilitates signal propagation in both forward and backward paths. ==== Forward propagation ==== If the output of the ℓ {\displaystyle \ell } -th residual block is the input to the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th residual block (assuming no activation function between blocks), then the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th input is: x ℓ + 1 = F ( x ℓ ) + x ℓ {\displaystyle x_{\ell +1}=F(x_{\ell })+x_{\ell }} Applying this formulation recursively, e.g.: x ℓ + 2 = F ( x ℓ + 1 ) + x ℓ + 1 = F ( x ℓ + 1 ) + F ( x ℓ ) + x ℓ {\displaystyle {\begin{aligned}x_{\ell +2}&=F(x_{\ell +1})+x_{\ell +1}\\&=F(x_{\ell +1})+F(x_{\ell })+x_{\ell }\end{aligned}}} yields the general relationship: x L = x ℓ + ∑ i = ℓ L − 1 F ( x i ) {\displaystyle x_{L}=x_{\ell }+\sum _{i=\ell }^{L-1}F(x_{i})} where L {\textstyle L} is the index of a residual block and ℓ {\textstyle \ell } is the index of some earlier block. This formulation suggests that there is always a signal that is directly sent from a shallower block ℓ {\textstyle \ell } to a deeper block L {\textstyle L} . ==== Backward propagation ==== The residual learning formulation provides the added benefit of mitigating the vanishing gradient problem to some extent. However, it is crucial to acknowledge that the vanishing gradient issue is not the root cause of the degradation problem, which is tackled through the use of normalization. To observe the effect of residual blocks on backpropagation, consider the partial derivative of a loss function E {\displaystyle {\mathcal {E}}} with respect to some residual block input x ℓ {\displaystyle x_{\ell }} . Using the equation above from forward propagation for a later residual block L > ℓ {\displaystyle L>\ell } : ∂ E ∂ x ℓ = ∂ E ∂ x L ∂ x L ∂ x ℓ = ∂ E ∂ x L ( 1 + ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) ) = ∂ E ∂ x L + ∂ E ∂ x L ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) {\displaystyle {\begin{aligned}{\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial x_{L}}{\partial x_{\ell }}}\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}\left(1+{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\right)\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}+{\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\end{aligned}}} This formulation suggests that the gradient computation of a shallower layer, ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} , always has a later term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} that is directly added. Even if the gradients of the F ( x i ) {\displaystyle F(x_{i})} terms are small, the total gradient ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} resists vanishing due to the added term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} . == Variants of residual blocks == === Basic block === A basic block is the simplest building block studied in the original ResNet. This block consists of two sequential 3x3 convolutional layers and a residual connection. The input and output dimensions of both layers are equal. === Bottleneck block === A bottleneck block consists of three sequential convolutional layers and a residual connection. The first layer in this block is a 1×1 convolution for dimension reduction (e.g., to 1/2 of the input dimension); the second layer performs a 3×3 convolution; the last layer is another 1×1 convolution for dimension restoration. The models of ResNet-50, ResNet-101, and ResNet-152 are all based on bottleneck blocks. === Pre-activation block === The pre-activation residual block applies activation functions before applying the residual function F {\displaystyle F} . Formally, the computation of a pre-activation residual block can be written as: x ℓ + 1 = F ( ϕ ( x ℓ ) ) + x ℓ {\displaystyle x_{\ell +1}=F(\phi (x_{\ell }))+x_{\ell }} where ϕ {\displaystyle \phi } can be any activation (e.g. ReLU) or normalization (e.g. LayerNorm) operation. This design reduces the number of non-identity mappings between residual blocks, and allows an identity mapping directly from the input to the output. This design was used to train models with 200 to over 1000 layers, and was found to consistently outperform variants where the residual path is not an identity function. The pre-activation ResNet with 200 layers took 3 weeks to train for ImageNet on 8 GPUs in 2016. Since GPT-2, transformer blocks have been mostly implemented as pre-activation blocks. This is often referred to as "pre-normalization" in the literature of transformer models. == Applications == Originally, ResNet was designed for computer vision. All transformer architectures include residual connections. Indeed, very deep transformers cannot be trained without them. The original ResNet paper made no claim on being inspired by biological systems. However, later research has related ResNet to biologically-plausible algorithms. A study published in Science in 2023 disclosed the complete connectome of an insect brain (specifically that of a fruit fly larva). This study discovered "multilayer shortcuts" that resemble the skip connections in artificial neural networks, including ResNets. == History == === Previous work === Residual connections were noticed in neu

    Read more →
  • ChatScript

    ChatScript

    ChatScript is a combination Natural Language engine and dialog management system designed initially for creating chatbots, but is currently also used for various forms of NL processing. It is written in C++. The engine is an open source project at SourceForge. and GitHub. ChatScript was written by Bruce Wilcox and originally released in 2011, after Suzette (written in ChatScript) won the 2010 Loebner Prize, fooling one of four human judges. == Features == In general ChatScript aims to author extremely concisely, since the limiting scalability of hand-authored chatbots is how much/fast one can write the script. Because ChatScript is designed for interactive conversation, it automatically maintains user state across volleys. A volley is any number of sentences the user inputs at once and the chatbots response. The basic element of scripting is the rule. A rule consists of a type, a label (optional), a pattern, and an output. There are three types of rules. Gambits are something a chatbot might say when it has control of the conversation. Rejoinders are rules that respond to a user remark tied to what the chatbot just said. Responders are rules that respond to arbitrary user input which is not necessarily tied to what the chatbot just said. Patterns describe conditions under which a rule may fire. Patterns range from extremely simplistic to deeply complex (analogous to Regex but aimed for NL). Heavy use is typically made of concept sets, which are lists of words sharing a meaning. ChatScript contains some 2000 predefined concepts and scripters can easily write their own. Output of a rule intermixes literal words to be sent to the user along with common C-style programming code. Rules are bundled into collections called topics. Topics can have keywords, which allows the engine to automatically search the topic for relevant rules based on user input. == Example code == Words starting with ~ are concept sets. For example, ~fruit is the list of all known fruits. The simple pattern (~fruit) reacts if any fruit is mentioned immediately after the chatbot asks for favorite food. The slightly more complex pattern for the rule labelled WHATMUSIC requires all the words what, music, you and any word or phrase meaning to like, but they may occur in any order. Responders come in three types. ?: rules react to user questions. s: rules react to user statements. u: rules react to either. ChatScript code supports standard if-else, loops, user-defined functions and calls, and variable assignment and access. == Data == Some data in ChatScript is transient, meaning it will disappear at the end of the current volley. Other data is permanent, lasting forever until explicitly killed off. Data can be local to a single user or shared across all users at the bot level. Internally all data is represented as text and is automatically converted to a numeric form as needed. === Variables === User variables come in several kinds. Variables purely local to a topic or function are transient. Global variables can be declared as transient or permanent. A variable is generally declared merely by using it, and its type depends on its prefix ($, $$, $_). === Facts === In addition to variables, ChatScript supports facts – triples of data, which can also be transient or permanent. Functions can query for facts having particular values of some of the fields, making them act like an in-memory database. Fact retrieval is very quick and efficient the number of available in-memory facts is largely constrained to the available memory of the machine running the ChatScript engine. Facts can represent record structures and are how ChatScript represents JSON internally. Tables of information can be defined to generate appropriate facts. The above table links people to what they invented (1 per line) with Einstein getting a list of things he did. == External communication == ChatScript embeds the Curl library and can directly read and write facts in JSON to a website. == Server == A ChatScript engine can run in local or server mode. == Pos-tagging, parsing, and ontology == ChatScript comes with a copy of English WordNet embedded within, including its ontology, and creates and extends its own ontology via concept declarations. It has an English language pos-tagger and parser and supports integration with TreeTagger for pos-tagging a number of other languages (TreeTagger commercial license required). == Databases == In addition to an internal fact database, ChatScript supports PostgreSQL, MySQL, MSSQL and MongoDB both for access by scripts, but also as a central filesystem if desired so ChatScript can be scaled horizontally. A common use case is to use a centralized database to host the user files and multiple servers to scale the ChatScript engine. == JavaScript == ChatScript also embeds DukTape, ECMAScript E5/E5.1 compatibility, with some semantics updated from ES2015+. == Spelling Correction == ChatScript has built-in automatic spell checking, which can be augmented in script as both simple word replacements or context sensitive changes. With appropriate simple rules you can change perfect legal words into other words or delete them. E.g., if you have a concept of ~electronic_goods and don't want an input of Radio Shack (a store name) to be detected as an electronic good, you can get the input to change to Radio_Shack (a single word), or allow the words to remain but block the detection of the concept. This is particularly useful when combined with speech-to-text code that is imperfect, but you are familiar with common failings of it and can compensate for them in script. == Control flow == A chatbot's control flow is managed by the control script. This is merely another ordinary topic of rules, that invokes API functions of the engine. Thus control is fully configurable by the scripter (and functions exist to allow introspection into the engine). There are pre-processing control flow and post-processing control flow options available, for special processing.

    Read more →
  • Information schema

    Information schema

    In relational databases, the information schema (information_schema) is an ANSI-standard set of read-only views that provide information about all of the tables, views, columns, and procedures in a database. It can be used as a source of the information that some databases make available through non-standard commands, such as: the SHOW command of MySQL the DESCRIBE command of Oracle's SQLPlus the \d command in psql (PostgreSQL's default command-line program). => SELECT count(table_name) FROM information_schema.tables; count ------- 99 (1 row) => SELECT column_name, data_type, column_default, is_nullable FROM information_schema.columns WHERE table_name='alpha'; column_name | data_type | column_default | is_nullable -------------+-----------+----------------+------------- foo | integer | | YES bar | character | | YES (2 rows) => SELECT FROM information_schema.information_schema_catalog_name; catalog_name -------------- johnd (1 row) == Implementation == As a notable exception among major database systems, Oracle does not as of 2015 implement the information schema. An open-source project exists to address this. RDBMSs that support information_schema include: Amazon Redshift Apache Hive Microsoft SQL Server MonetDB Snowflake MySQL PostgreSQL H2 Database HSQLDB InterSystems Caché MariaDB SingleStore (formerly MemSQL) Mimer SQL Snowflake Trino Presto CrateDB ClickHouse CockroachDB Kinetica DB TiDB RDBMSs that do not support information_schema include: Apache Derby Apache Ignite Firebird Microsoft Access IBM Informix Ingres IBM Db2 Oracle Database SAP HANA SQLite Sybase ASE Sybase SQL Anywhere Teradata Vertica

    Read more →
  • AUTINDEX

    AUTINDEX

    AUTINDEX is a commercial text mining software package based on sophisticated linguistics. AUTINDEX, resulting from research in information extraction, is a product of the Institute of Applied Information Sciences (IAI) which is a non-profit institute that has been researching and developing language technology since its foundation in 1985. IAI is an institute affiliated to Saarland University in Saarbrücken, Germany. AUTINDEX is the result of a number of research projects funded by the EU (Project BINDEX), by Deutsche Forschungsgemeinschaft and the German Ministry for Economy. Amongst the latter there are the projects LinSearch, and WISSMER, see also the reference to IAI-Website. The basic functionality of AUTINDEX is the extraction of key words from a document to represent the semantics of the document. Ideally the system is integrated with a thesaurus that defines the standardised terms to be used for key word assignment. AUTINDEX is used in library applications (e.g. integrated in dandelon.com) as well as in high quality (expert) information systems, and in document management and content management environments. Together with AUTINDEX a number of additional software comes along such as an integration with Apache Solr / Lucene to provide a complete information retrieval environment, a classification and categorisation system on the basis of a machine learning software that assigns domains to the document, and a system for searching with semantically similar terms that are collected in so called tag clouds.

    Read more →
  • Night Sky (app)

    Night Sky (app)

    Night Sky (app) is an application developed and published by indie studio iCandi Apps Ltd. from the UK. Night Sky is a stargazing reference app, where the user can explore a virtual representation of the night sky to identify stars, planets, constellations and satellites. The app is developed specifically for iOS, tvOS and watchOS devices. Night Sky was first released on November 1, 2011 for iOS, and has had multiple updates since launch. Night Sky was mentioned in the September 2016 Apple Keynote during the Apple Watch Series 2 announcement. In October 2016, Night Sky was featured as the Free App of The Week on the Apple App Store. == Reception == Night Sky was featured in Apple's 'Best of 2012' and has also been pre-installed onto iPads in Apple retail stores worldwide.

    Read more →
  • Deep image prior

    Deep image prior

    Deep image prior is a type of convolutional neural network used to enhance a given image with no prior training data other than the image itself. A neural network is randomly initialized and used as prior to solve inverse problems such as noise reduction, super-resolution, and inpainting. Image statistics are captured by the structure of a convolutional image generator rather than by any previously learned capabilities. == Method == === Background === Inverse problems such as noise reduction, super-resolution, and inpainting can be formulated as the optimization task x ∗ = m i n x E ( x ; x 0 ) + R ( x ) {\displaystyle x^{}=min_{x}E(x;x_{0})+R(x)} , where x {\displaystyle x} is an image, x 0 {\displaystyle x_{0}} a corrupted representation of that image, E ( x ; x 0 ) {\displaystyle E(x;x_{0})} is a task-dependent data term, and R(x) is the regularizer. Deep neural networks learn a generator/decoder x = f θ ( z ) {\displaystyle x=f_{\theta }(z)} which maps a random code vector z {\displaystyle z} to an image x {\displaystyle x} . The image corruption method used to generate x 0 {\displaystyle x_{0}} is selected for the specific application. === Specifics === In this approach, the R ( x ) {\displaystyle R(x)} prior is replaced with the implicit prior captured by the neural network (where R ( x ) = 0 {\displaystyle R(x)=0} for images that can be produced by a deep neural networks and R ( x ) = + ∞ {\displaystyle R(x)=+\infty } otherwise). This yields the equation for the minimizer θ ∗ = a r g m i n θ E ( f θ ( z ) ; x 0 ) {\displaystyle \theta ^{}=argmin_{\theta }E(f_{\theta }(z);x_{0})} and the result of the optimization process x ∗ = f θ ∗ ( z ) {\displaystyle x^{}=f_{\theta ^{}}(z)} . The minimizer θ ∗ {\displaystyle \theta ^{}} (typically a gradient descent) starts from a randomly initialized parameters and descends into a local best result to yield the x ∗ {\displaystyle x^{}} restoration function. ==== Overfitting ==== A parameter θ may be used to recover any image, including its noise. However, the network is reluctant to pick up noise because it contains high impedance while useful signal offers low impedance. This results in the θ parameter approaching a good-looking local optimum so long as the number of iterations in the optimization process remains low enough not to overfit data. === Deep Neural Network Model === Typically, the deep neural network model for deep image prior uses a U-Net like model without the skip connections that connect the encoder blocks with the decoder blocks. The authors in their paper mention that "Our findings here (and in other similar comparisons) seem to suggest that having deeper architecture is beneficial, and that having skip-connections that work so well for recognition tasks (such as semantic segmentation) is highly detrimental." == Applications == === Denoising === The principle of denoising is to recover an image x {\displaystyle x} from a noisy observation x 0 {\displaystyle x_{0}} , where x 0 = x + ϵ {\displaystyle x_{0}=x+\epsilon } . The distribution ϵ {\displaystyle \epsilon } is sometimes known (e.g.: profiling sensor and photon noise) and may optionally be incorporated into the model, though this process works well in blind denoising. The quadratic energy function E ( x , x 0 ) = | | x − x 0 | | 2 {\displaystyle E(x,x_{0})=||x-x_{0}||^{2}} is used as the data term, plugging it into the equation for θ ∗ {\displaystyle \theta ^{}} yields the optimization problem m i n θ | | f θ ( z ) − x 0 | | 2 {\displaystyle min_{\theta }||f_{\theta }(z)-x_{0}||^{2}} . === Super-resolution === Super-resolution is used to generate a higher resolution version of image x. The data term is set to E ( x ; x 0 ) = | | d ( x ) − x 0 | | 2 {\displaystyle E(x;x_{0})=||d(x)-x_{0}||^{2}} where d(·) is a downsampling operator such as Lanczos that decimates the image by a factor t. === Inpainting === Inpainting is used to reconstruct a missing area in an image x 0 {\displaystyle x_{0}} . These missing pixels are defined as the binary mask m ∈ { 0 , 1 } H × V {\displaystyle m\in \{0,1\}^{H\times V}} . The data term is defined as E ( x ; x 0 ) = | | ( x − x 0 ) ⊙ m | | 2 {\displaystyle E(x;x_{0})=||(x-x_{0})\odot m||^{2}} (where ⊙ {\displaystyle \odot } is the Hadamard product). The intuition behind this is that the loss is computed only on the known pixels in the image, and the network is going to learn enough about the image to fill in unknown parts of the image even though the computed loss doesn't include those pixels. This strategy is used to remove image watermarks by treating the watermark as missing pixels in the image. === Flash–no-flash reconstruction === This approach may be extended to multiple images. A straightforward example mentioned by the author is the reconstruction of an image to obtain natural light and clarity from a flash–no-flash pair. Video reconstruction is possible but it requires optimizations to take into account the spatial differences. == Implementations == A reference implementation rewritten in Python 3.6 with the PyTorch 0.4.0 library was released by the author under the Apache 2.0 license: deep-image-prior A TensorFlow-based implementation written in Python 2 and released under the CC-SA 3.0 license: deep-image-prior-tensorflow A Keras-based implementation written in Python 2 and released under the GPLv3: machine_learning_denoising == Example == See Astronomy Picture of the Day (APOD) of 2024-02-18

    Read more →
  • Association for Computational Linguistics

    Association for Computational Linguistics

    The Association for Computational Linguistics (ACL) is a scientific and professional organization for people working on natural language processing. Its namesake conference is one of the primary high impact conferences for natural language processing research, along with EMNLP. The conference is held each summer in locations where significant computational linguistics research is carried out. It was founded in 1962, originally named the Association for Machine Translation and Computational Linguistics (AMTCL). It became the ACL in 1968. The ACL has a European (EACL), a North American (NAACL), and an Asian (AACL) chapter. == History == The ACL was founded in 1962 as the Association for Machine Translation and Computational Linguistics (AMTCL). The initial membership was about 100. In 1965, the AMTCL took over the journal Mechanical Translation and Computational Linguistics. This journal was succeeded by many other journals: the American Journal of Computational Linguistics (1974–1978, 1980–1983), and then Computational Linguistics (1984–present). Since 1988, the journal has been published for the ACL by MIT Press. The annual meeting was first held in 1963 in conjunction with the Association for Computing Machinery National Conference. The annual meeting was, for a long time, relatively informal and did not publish anything longer than abstracts. By 1968, the society took on its current name, the Association for Computational Linguistics (ACL). The publication of the annual meeting's Proceedings of the ACL began in 1979 and gradually matured into its modern form. Many of the meetings were held in conjunction with the Linguistic Society of America, and a few with the American Society for Information Science and the Cognitive Science Society. The United States government sponsored much research from 1989 to 1994, characterized by an increase in author retention rates and an increase in research in some key topics, such as speech recognition, in ACL. By the 21st century, it was able to maintain authors at a high rate who coalesced in a more stable arrangement around individual research topics. In 1991, the group published a prototype for a text generator based on the universal grammar theory of Noam Chomsky. The system, nicknamed Parrot, relied on a finite set of syntactic transformations and a hand-curated lexicon. Despite some initial success, including experimentation with morpheme syntactics, funding halted after the research team encountered intractable difficulties with inflection and abstract locutions. == Annual Meeting of the ACL == Every year, the ACL holds the Annual Meeting of the ACL. The location lies in Europe in years zero modulo three, North America in years one modulo three, and Asia–Australia in years two modulo three. In 2020, the Annual Meeting received for the first time more submissions from China than the United States. == Activities == The ACL organizes several of the top conferences and workshops in the field of computational linguistics and natural language processing. These include: Annual Meeting of the Association for Computational Linguistics (ACL), the flagship conference of the organization Empirical Methods in Natural Language Processing (EMNLP) International Joint Conference on Natural Language Processing (IJCNLP), held jointly one of the other conferences on a rotating basis Conference on Computational Natural Language Learning (CoNLL) Lexical and Computational Semantics and Semantic Evaluation (SemEval) Joint Conference on Lexical and Computational Semantics (SEM) Workshop on Statistical Machine Translation (WMT) Besides conferences, the ACL also sponsors the journals Computational Linguistics and Transactions of the Association for Computational Linguistics (TACL). Papers and other presentations at ACL and ACL-affiliated venues are archived online in the open-access ACL Anthology. == Special Interest Groups == ACL has a large number of Special Interest Groups (SIGs), focusing on specific areas of natural language processing. Some current SIGs within ACL are: == Presidents == Each year, the ACL elects a distinguished computational linguist who becomes vice-president of the organization in the next calendar year and president one year later. Recent ACL presidents are:

    Read more →
  • Legendre moment

    Legendre moment

    In mathematics, Legendre moments are a type of image moment and are achieved by using the Legendre polynomial. Legendre moments are used in areas of image processing including: pattern and object recognition, image indexing, line fitting, feature extraction, edge detection, and texture analysis. Legendre moments have been studied as a means to reduce image moment calculation complexity by limiting the amount of information redundancy through approximation. == Legendre moments == Source: With order of m + n, and object intensity function f(x,y): L m n = ( 2 m + 1 ) ( 2 n + 1 ) 4 ∫ − 1 1 ∫ − 1 1 P m ( x ) P n ( y ) f ( x , y ) d x d y {\displaystyle L_{mn}={\frac {(2m+1)(2n+1)}{4}}\int \limits _{-1}^{1}\int \limits _{-1}^{1}P_{m}(x)P_{n}(y)f(x,y)\,dx\,dy} where m,n = 1, 2, 3, ...∞ with the nth-order Legendre polynomials being: P n ( x ) = ∑ k = 0 n a k , n x k = ( − 1 ) n 2 n n ! ( d d x ) [ ( 1 − x 2 ) n ] {\displaystyle P_{n}(x)=\sum _{k=0}^{n}a_{k,n}x^{k}={\frac {(-1)^{n}}{2^{n}n!}}\left({\frac {d}{dx}}\right)[(1-x^{2})^{n}]} which can also be written: P n ( x ) = ∑ k = 0 D ( n ) ( − 1 ) k ( 2 n − 2 k ) ! 2 n k ! ( n − k ) ! ( n − 2 k ) ! x n − 2 k = ( 2 n ) ! 2 n ( n ! ) 2 x n − ( 2 n − 2 ) ! 2 n 1 ! ( n − 1 ) ! ( n − 2 ) ! x n − 2 + ⋯ {\displaystyle {\begin{aligned}P_{n}(x)&=\sum _{k=0}^{D(n)}(-1)^{k}{\frac {(2n-2k)!}{2^{n}k!(n-k)!(n-2k)!}}x^{n-2k}\\[5pt]&={\frac {(2n)!}{2^{n}(n!)^{2}}}x^{n}-{\frac {(2n-2)!}{2^{n}1!(n-1)!(n-2)!}}x^{n-2}+\cdots \end{aligned}}} where D(n) = floor(n/2). The set of Legendre polynomials {Pn(x)} form an orthogonal set on the interval [−1,1]: ∫ − 1 1 P n ( x ) P m ( x ) d x = 2 2 n + 1 δ n m {\displaystyle \int _{-1}^{1}P_{n}(x)P_{m}(x)\,dx={\frac {2}{2n+1}}\delta _{nm}} A recurrence relation can be used to compute the Legendre polynomial: ( n + 1 ) P n + 1 ( x ) − ( 2 n + 1 ) x P n ( x ) + n P n − 1 ( x ) = 0 {\displaystyle (n+1)P_{n+1}(x)-(2n+1)xP_{n}(x)+nP_{n-1}(x)=0} f(x,y) can be written as an infinite series expansion in terms of Legendre polynomials [−1 ≤ x,y ≤ 1.]: f ( x , y ) = ∑ m = 0 ∞ ∑ n = 0 ∞ λ m n P m ( x ) P n ( y ) {\displaystyle f(x,y)=\sum _{m=0}^{\infty }\sum _{n=0}^{\infty }\lambda _{mn}P_{m}(x)P_{n}(y)}

    Read more →
  • Application permissions

    Application permissions

    Permissions are a means of controlling and regulating access to specific system- and device-level functions by software. Typically, types of permissions cover functions that may have privacy implications, such as the ability to access a device's hardware features (including the camera and microphone), and personal data (such as storage devices, contacts lists, and the user's present geographical location). Permissions are typically declared in an application's manifest, and certain permissions must be specifically granted at runtime by the user—who may revoke the permission at any time. Permission systems are common on mobile operating systems, where permissions needed by specific apps must be disclosed via the platform's app store. == Mobile devices == On mobile operating systems for smartphones and tablets, typical types of permissions regulate: Access to storage and personal information, such as contacts, calendar appointments, etc. Location tracking. Access to the device's internal camera and/or microphone. Access to biometric sensors, including fingerprint readers and other health sensors.. Internet access. Access to communications interfaces (including their hardware identifiers and signal strength where applicable, and requests to enable them), such as Bluetooth, Wi-Fi, NFC, and others. Making and receiving phone calls. Sending and reading text messages The ability to perform in-app purchases. The ability to "overlay" themselves within other apps. Installing, deleting and otherwise managing applications. Authentication tokens (e.g., OAuth tokens) from web services stored in system storage for sharing between apps. Prior to Android 6.0 "Marshmallow", permissions were automatically granted to apps at runtime, and they were presented upon installation in Google Play Store. Since Marshmallow, certain permissions now require the app to request permission at runtime by the user. These permissions may also be revoked at any time via Android's settings menu. Usage of permissions on Android are sometimes abused by app developers to gather personal information and deliver advertising; in particular, apps for using a phone's camera flash as a flashlight (which have grown largely redundant due to the integration of such functionality at the system level on later versions of Android) have been known to require a large array of unnecessary permissions beyond what is actually needed for the stated functionality. iOS imposes a similar requirement for permissions to be granted at runtime, with particular controls offered for enabling of Bluetooth, Wi-Fi, and location tracking. == WebPermissions == WebPermissions is a permission system for web browsers. When a web application needs some data behind permission, it must request it first. When it does it, a user sees a window asking him to make a choice. The choice is remembered, but can be cleared lately. Currently the following resources are controlled: geolocation desktop notifications service workers sensors audio capturing devices, like sound cards, and their model names and characteristics video capturing devices, like cameras, and their identifiers and characteristics == Analysis == The permission-based access control model assigns access privileges for certain data objects to application. This is a derivative of the discretionary access control model. The access permissions are usually granted in the context of a specific user on a specific device. Permissions are granted permanently with few automatic restrictions. In some cases permissions are implemented in 'all-or-nothing' approach: a user either has to grant all the required permissions to access the application or the user can not access the application. There is still a lack of transparency when the permission is used by a program or application to access the data protected by the permission access control mechanism. Even if a user can revoke a permission, the app can blackmail a user by refusing to operate, for example by just crashing or asking user to grant the permission again in order to access the application. The permission mechanism has been widely criticized by researchers for several reasons, including; Intransparency of personal data extraction and surveillance, including the creation of a false sense of security; End-user fatigue of micro-managing access permissions leading to a fatalistic acceptance of surveillance and intransparency; Massive data extraction and personal surveillance carried out once the permissions are granted. Some apps, such as XPrivacy and Mockdroid spoof data in order to act as a measure for privacy. Further transparency methods include longitudinal behavioural profiling and multiple-source privacy analysis of app data access.

    Read more →
  • Natural language processing

    Natural language processing

    Natural language processing (NLP) is the processing of natural language information by a computer. NLP is a subfield of computer science and is closely associated with artificial intelligence. NLP is also related to information retrieval, knowledge representation, computational linguistics, and linguistics more broadly. Major processing tasks in an NLP system include: speech recognition, text classification, natural language understanding, and natural language generation. == History == Natural language processing has its roots in the 1950s. Already in 1950, Alan Turing published an article titled "Computing Machinery and Intelligence," which proposed what is now called the Turing test as a criterion of intelligence, though at the time that was not articulated as a problem separate from artificial intelligence. The proposed test includes a task that involves the automated interpretation and generation of natural language. === Symbolic NLP (1950s – early 1990s) === The premise of symbolic NLP is often illustrated using John Searle's Chinese room thought experiment: Given a collection of rules (e.g., a Chinese phrasebook, with questions and matching answers), the computer emulates natural language understanding (or other NLP tasks) by applying those rules to the data it confronts. 1950s: The Georgetown experiment in 1954 involved fully automatic translation of more than sixty Russian sentences into English. The authors claimed that within three or five years, machine translation would be a solved problem. However, real progress was much slower, and after the ALPAC report in 1966, which found that ten years of research had failed to fulfill the expectations, funding for machine translation was dramatically reduced. Little further research in machine translation was conducted in America (though some research continued elsewhere, such as Japan and Europe) until the late 1980s when the first statistical machine translation systems were developed. 1960s: Some notably successful natural language processing systems developed in the 1960s were SHRDLU, a natural language system working in restricted "blocks worlds" with restricted vocabularies, and ELIZA, a simulation of Rogerian psychotherapy, written by Joseph Weizenbaum between 1964 and 1966. Despite using minimal information about human thought or emotion, ELIZA was able to produce interactions that appeared human-like. When the "patient" exceeded the very small knowledge base, ELIZA might provide a generic response, for example, responding to "My head hurts" with "Why do you say your head hurts?". Ross Quillian's successful work on natural language was demonstrated with a vocabulary of only twenty words, because that was all that would fit in a computer memory at the time. 1970s: During the 1970s, many programmers began to write "conceptual ontologies", which structured real-world information into computer-understandable data. Examples are MARGIE (Schank, 1975), SAM (Cullingford, 1978), PAM (Wilensky, 1978), TaleSpin (Meehan, 1976), QUALM (Lehnert, 1977), Politics (Carbonell, 1979), and Plot Units (Lehnert 1981). During this time, the first chatterbots were written (e.g., PARRY). 1980s: The 1980s and early 1990s mark the heyday of symbolic methods in NLP. Focus areas of the time included research on rule-based parsing (e.g., the development of HPSG as a computational operationalization of generative grammar), morphology (e.g., two-level morphology), semantics (e.g., Lesk algorithm), reference (e.g., within Centering Theory) and other areas of natural language understanding (e.g., in the Rhetorical Structure Theory). Other lines of research were continued, e.g., the development of chatterbots with Racter and Jabberwacky. An important development (that eventually led to the statistical turn in the 1990s) was the rising importance of quantitative evaluation in this period. === Statistical NLP (1990s–present) === Up until the 1980s, most natural language processing systems were based on complex sets of hand-written rules. Starting in the late 1980s, however, there was a revolution in natural language processing with the introduction of machine learning algorithms for language processing. This shift was influenced by increasing computational power (see Moore's law) and a decline in the dominance of Chomskyan linguistic theories (e.g. transformational grammar), whose theoretical underpinnings discouraged the sort of corpus linguistics that underlies the machine-learning approach to language processing. 1990s: Many of the notable early successes in statistical methods in NLP occurred in the field of machine translation, due especially to work at IBM Research, such as IBM alignment models. These systems were able to take advantage of existing multilingual textual corpora that had been produced by the Parliament of Canada and the European Union as a result of laws calling for the translation of all governmental proceedings into all official languages of the corresponding systems of government. However, many systems relied on corpora that were specifically developed for the tasks they were designed to perform. This reliance has been a major limitation to their broader effectiveness and continues to affect similar systems. Consequently, significant research has focused on methods for learning effectively from limited amounts of data. 2000s: With the growth of the web, increasing amounts of raw (unannotated) language data have become available since the mid-1990s. Research has thus increasingly focused on unsupervised and semi-supervised learning algorithms. Such algorithms can learn from data that has not been hand-annotated with the desired answers or using a combination of annotated and non-annotated data. Generally, this task is much more difficult than supervised learning, and typically produces less accurate results for a given amount of input data. However, large quantities of non-annotated data are available (including, among other things, the entire content of the World Wide Web), which can often make up for the worse efficiency if the algorithm used has a low enough time complexity to be practical. 2003: word n-gram model, at the time the best statistical algorithm, is outperformed by a multi-layer perceptron (with a single hidden layer and context length of several words, trained on up to 14 million words, by Bengio et al.) 2010: Tomáš Mikolov (then a PhD student at Brno University of Technology) with co-authors applied a simple recurrent neural network with a single hidden layer to language modeling, and in the following years he went on to develop Word2vec. In the 2010s, representation learning and deep neural network-style (featuring many hidden layers) machine learning methods became widespread in natural language processing. This shift gained momentum due to results showing that such techniques can achieve state-of-the-art results in many natural language tasks, e.g., in language modeling and parsing. This is increasingly important in medicine and healthcare, where NLP helps analyze notes and text in electronic health records that would otherwise be inaccessible for study when seeking to improve care or protect patient privacy. == Approaches: Symbolic, statistical, neural networks == Symbolic approach, i.e., the hand-coding of a set of rules for manipulating symbols, coupled with a dictionary lookup, was historically the first approach used both by AI in general and by NLP in particular: such as by writing grammars or devising heuristic rules for stemming. Machine learning approaches, which include both statistical and neural networks, on the other hand, have many advantages over the symbolic approach: both statistical and neural network methods tend to focus more on the most common cases extracted from a corpus of texts, whereas the rule-based approach needs to provide rules for both rare and common cases equally. language models, produced by either statistical or neural networks methods, are more robust to both unfamiliar (e.g. containing words or structures that have not been seen before) and erroneous input (e.g. with misspelled words or words accidentally omitted) in comparison to the rule-based systems, which are also more costly to produce. the larger such a (probabilistic) language model is, the more accurate it becomes, in contrast to rule-based systems that can gain accuracy only by increasing the amount and complexity of the rules leading to intractability problems. Rule-based systems are commonly used: when the amount of training data is insufficient to successfully apply machine learning methods, e.g., for the machine translation of low-resource languages such as provided by the Apertium system, for preprocessing in NLP pipelines, e.g., tokenization, or for post-processing and transforming the output of NLP pipelines, e.g., for knowledge extraction from syntactic parses. === Statistical approach === In the late 1980s and mid-1990s, the statistical approach ended a peri

    Read more →
  • Split screen (computing)

    Split screen (computing)

    Split screen is a display technique in computer graphics that consists of dividing graphics and/or text into non-overlapping adjacent parts, typically as two or four rectangular areas. This allows for the simultaneous presentation of (usually) related graphical and textual information on a computer display. TV sports adopted this presentation methodology in the 1960s for instant replay. Non-dynamic split screens differ from windowing systems in that the latter allowed overlapping and freely movable parts of the screen (the "windows") to present both related and unrelated application data to the user. In contrast, split-screen views are strictly limited to fixed positions. The split screen technique can also be used to run two instances of an application, potentially allowing another user to interact with the second instance. == In operating systems == Split screen modes are used by mobile operating systems to enable computer multitasking similar to the window interface present in desktop operating systems. Android supports split screen view of two apps natively on all devices, while certain devices, such as Samsung Galaxy Z TriFold, support three sumultaneous views. Split screen functionality is not supported on iOS, but a similar feature called Split View is present in iPadOS, first introduced in 2015 with the first generation of iPad Pro. == In video games == The split screen feature is commonly used in non-networked, also known as couch co-op, video games with multiplayer options. In its most easily understood form, a split screen for a multiplayer video game is an audiovisual output device (usually a standard television for video game consoles) where the display has been divided into 2-4 equally sized areas (depending on number of players) so that the players can explore different areas simultaneously without being close to each other. This has historically been remarkably popular on consoles, which until the 2000s did not have access to the Internet or any other network and is less common today with modern support for networked console-to-console multiplayer. In competitive split-screen games, it is customarily considered cheating to look at another player's screen section to gain an advantage. === History === Split screen gaming dates back to at least the 1970s, with games such Drag Race (1977) from Kee Games in the arcades being presented in this format. It has always been a common feature of two or more player home console and computer games too, with notable titles being Kikstart II for 8-bit systems, a number of 16-bit racing games (such as Lotus Esprit Turbo Challenge and Road Rash II), and action/strategy games (such as Toejam & Earl and Lemmings), all employing a vertical or horizontal screen split for two player games. Xenophobe is notable as a three-way split screen arcade title, although on home platforms it was reduced to one or two screens. The addition of four controller ports on home consoles also ushered in more four-way split screen games, with Mario Kart 64 and Goldeneye 007 on the Nintendo 64 being two well known examples. In arcades, machines tended to move towards having a whole screen for each player, or multiple connected machines, for multiplayer. On home machines, especially in the first and third person shooter genres, multiplayer is now more common over a network or the internet rather than locally with split screen. Starting from the late 2000s, the presence of split screen multiplayer has largely been declining due to the increasing prevalence of online multiplayer, though TechRadar reported a resurgence of split screen due to support from independent studios and increased interest from the players.

    Read more →
  • Meesho

    Meesho

    Meesho Limited (short for Meri shop, transl. My shop) is an Indian e-commerce company, headquartered in Bengaluru. Founded by Vidit Aatrey and Sanjeev Barnwal in December 2015, Meesho is an online marketplace in categories such as fashion, home and kitchen, beauty and personal care, electronics accessories, and daily use products. == History == Meesho Private Limited, formerly Fashnear Technologies Private Limited, was established by IIT Delhi graduates Vidit Aatrey and Sanjeev Barnwal in December, 2015 In 2016, the founders came up with the idea of re-establishing the platform as Meesho, one that would enable country-wide shipping for resellers with the use of social media sites as tools for marketing. In February 2019, the platform reported having around 209,000 users and about 1.2 million monthly orders, and in March 2020, it reported approximately 563,000 users and 3.1 million monthly orders. In 2021, the Meesho mobile application was ranked among the most downloaded shopping apps globally. In 2022, Meesho had about 120 million monthly users and about 910 million orders were made through the platform, with a gross merchandise value (GMV) of about $5 billion. According to report as of August 2023 Meesho delisted 42 lakh counterfeit listings and 10 lakh restricted products under its initiative Project Suraksha. During the same period, the platform blocked access for over 12,000 user accounts flagged for policy violations. The Court granted injunctive relief by directing domain registrars to suspend the infringing websites. Additionally, the Court ordered law enforcement authorities to initiate criminal investigations, freeze associated financial accounts against the identified offenders. In 2023, Meesho became the fastest shopping app to cross over 500 million downloads. In 2024, Meesho introduced Valmo, a logistics marketplace, to provide shipment services to sellers by aggregating multiple logistics providers. Meesho employs over 3,000 small businesses and 10-12 large firms for warehousing and sorting operations within its logistics framework. According to media reports, Valmo operating in approximately 15,000 pincodes in India with around 6,000 partners. It is reported to handle over 50% of Meesho's daily orders. In November 2024, Meesho introduced a generative AI-powered voice bot for customer support, managing approximately 60,000 calls daily in English and Hindi. According to media reports, the system resolves the majority of queries without human assistance, with only a small fraction of calls requiring manual intervention. According to media reports, in 2024, Meesho prevented over 22 million suspicious or potentially fraudulent transactions on its platform. The company initiated legal proceedings, resulting in the filing of twelve cases, including nine specifically targeting over forty individuals in the cities of Kolkata and Ranchi. The company filed a suit in the Delhi High Court for a permanent injunction against parties operating deceptive websites misappropriating its brand identity. Meesha went public through an initial public offering in December 2025, raising $603 million. It is listed on both the BSE and NSE. == Recognition == In 2023, Meesho was named one of the most influential companies of the year by Time (magazine).

    Read more →
  • TipTop Technologies

    TipTop Technologies

    TipTop Technologies is a real-time web and social search engine with a platform for semantic analysis of natural language. Tip-Top Search provides results capturing individual and group sentiment, opinions, and experiences there from the content of various sorts such as real-time messages from Twitter or consumer product reviews on Amazon.com. TipTop Technologies and ITC Infotech collaborated to create a search interface suitable for both enterprise and consumer applications. Tip-Top's products are part of the "emerging Web 3.0 applications which use semantic technologies to augment the underlying Web system's functionalities." Their main product is 360, an AI tool that incorporates multiple AI applications under one wing. Jonathan AlBright professor at Elon University, found videos generated by TipTop Technologies software on YouTube in his research into artificial intelligence, described it as AI-generated "fake news". Through semantic analysis of large data sets, TipTop gleaned behavioral insights from Tweets around events like Halloween, Thanksgiving, Holiday Gifting, the Super Bowl, and the Oscar Nominees for the Academy Awards coverage. Sentiment analysis, concept trend tracking, and real-time market research are other applications included in the TipTop Search product. TipTop's insight engine solves the problem of real-time data noise, and its ability to "sort the 'good tweets' from the 'bad tweets' when it comes to a product, service, or a region..." In addition, products like TipTop Shopping with customizable search widgets bring together consumer reviews, social search, and sentiment analysis enabling product comparisons across attributes like the overall value and aiding purchasing decisions through user-driven product tips and pits. TipTop Finance adds another complexity to real-time search results by incorporating corporate sentiment, company stock tickers, and social media into TipTop's existing social search platform. Additional success applying semantic technologies has been with polling, "if you compare these Gallup results with TipTop, a sentiment engine based on Twitter, the results are not way off. It does surprise you but it tells me that sentiment analysis in case of public opinion about a burning social issue or a famous personality is relatively easier." With the increasing amount of unstructured, opinion-oriented, and user-generated content available on the Web, TipTop's technology aims to make sense of all this data, and deliver it in a useful way for consumer and enterprise users alike. TipTop Technologies is a privately held company with its headquarters in the San Francisco Bay Area, and team members are located globally.

    Read more →