AI Email Free Generator

AI Email Free Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Supertoroid

  In geometry and computer graphics, a supertoroid or supertorus is usually understood to be a family of doughnut-like surfaces (technically, a topological torus) whose shape is defined by mathematical formulas similar to those that define the superellipsoids. The plural of "supertorus" is either supertori or supertoruses. The family was described and named by Alan Barr in 1994. Barr's supertoroids have been fairly popular in computer graphics as a convenient model for many objects, such as smooth frames for rectangular things. One quarter of a supertoroid can provide a smooth and seamless 90-degree joint between two superquadric cylinders. However, they are not algebraic surfaces (except in special cases). == Formulas == Alan Barr's supertoroids are defined by parametric equations similar to the trigonometric equations of the torus, except that the sine and cosine terms are raised to arbitrary powers. Namely, the generic point P(u, v) of the surface is given by P ( u , v ) = ( X ( u , v ) Y ( u , v ) Z ( u , v ) ) = ( ( a + C u s ) C v t ( b + C u s ) S v t S u s ) {\displaystyle P(u,v)=\left({\begin{array}{c}X(u,v)\\Y(u,v)\\Z(u,v)\end{array}}\right)=\left({\begin{array}{c}(a+C_{u}^{s})C_{v}^{t}\\(b+C_{u}^{s})S_{v}^{t}\\S_{u}^{s}\end{array}}\right)} where C θ ε = sgn ⁡ ( cos ⁡ θ ) | cos ⁡ θ | ε , S θ ε = sgn ⁡ ( sin ⁡ θ ) | sin ⁡ θ | ε , {\displaystyle {\begin{aligned}C_{\theta }^{\varepsilon }&=\operatorname {sgn} (\cos \theta )\,\left|\,\cos \theta \,\right|^{\varepsilon },\\S_{\theta }^{\varepsilon }&=\operatorname {sgn} (\sin \theta )\ \left|\,\sin \theta \ \right|^{\varepsilon },\end{aligned}}} sgn is the sign function, and the parameters u, v range from 0 to 360 degrees (0 to 2π radians). In these formulas, the parameter s > 0 controls the "squareness" of the vertical sections, t > 0 controls the squareness of the horizontal sections, and a, b ≥ 1 are the major radii in the x and y directions. With s = t = 1 and a = b = R one obtains the ordinary torus with major radius R and minor radius 1, with the center at the origin and rotational symmetry about the z-axis. In general, the supertorus defined as above spans the intervals: − ( a + 1 ) ≤ x ≤ + ( a + 1 ) − ( b + 1 ) ≤ y ≤ + ( b + 1 ) − 1 ≤ z ≤ + 1 {\displaystyle {\begin{array}{rcccl}-(a+1)&\leq &x&\leq &+(a+1)\\[4pt]-(b+1)&\leq &y&\leq &+(b+1)\\[4pt]-1&\leq &z&\leq &+1\end{array}}} The whole shape is symmetric about the planes x = 0, y = 0, and z = 0. The hole runs in the z direction and spans the intervals − ( a − 1 ) ≤ x ≤ + ( a − 1 ) − ( b − 1 ) ≤ y ≤ + ( b − 1 ) − ∞ ≤ z ≤ + ∞ {\displaystyle {\begin{array}{rcccl}-(a-1)&\leq &x&\leq &+(a-1)\\[4pt]-(b-1)&\leq &y&\leq &+(b-1)\\[4pt]-\infty &\leq &z&\leq &+\infty \end{array}}} A curve of constant u on this surface is a horizontal Lamé curve with exponent ⁠ 2 t , {\displaystyle {\tfrac {2}{t}},} ⁠ scaled in x and y and displaced in z. A curve of constant v, projected on the plane x = 0 or y = 0, is a Lamé curve with exponent ⁠ 2 s , {\displaystyle {\tfrac {2}{s}},} ⁠ scaled and horizontally shifted. If v = 0, the curve is planar and spans the intervals: a − 1 ≤ x ≤ a + 1 − 1 ≤ z ≤ + 1 {\displaystyle {\begin{array}{rcccl}a-1&\leq &x&\leq &a+1\\[4pt]-1&\leq &z&\leq &+1\end{array}}} and similarly if v = 90°, 180°, 270°. The curve is also planar if a = b. In general, if a ≠ b and v is not a multiple of 90 degrees, the curve of constant v will not be planar; and, conversely, a vertical plane section of the supertorus will not be a Lamé curve. The basic supertoroid shape defined above is often modified by non-uniform scaling to yield supertoroids of specific width, length, and vertical thickness. == Plotting code == The following GNU Octave code generates plots of a supertorus:

  Read more →
• 

  Sardinas–Patterson algorithm

  In coding theory, the Sardinas–Patterson algorithm is a classical algorithm for determining in polynomial time whether a given variable-length code is uniquely decodable, named after August Albert Sardinas and George W. Patterson, who published it in 1953. The algorithm carries out a systematic search for a string which admits two different decompositions into codewords. As Knuth reports, the algorithm was rediscovered about ten years later in 1963 by Floyd, despite the fact that it was at the time already well known in coding theory. == Idea of the algorithm == Consider the code { a ↦ 1 , b ↦ 011 , c ↦ 01110 , d ↦ 1110 , e ↦ 10011 } {\displaystyle \{\,{\texttt {a}}\mapsto {\texttt {1}},{\texttt {b}}\mapsto {\texttt {011}},{\texttt {c}}\mapsto {\texttt {01110}},{\texttt {d}}\mapsto {\texttt {1110}},{\texttt {e}}\mapsto {\texttt {10011}}\,\}} . This code, which is based on an example by Berstel, is an example of a code which is not uniquely decodable, since the string 011101110011 can be interpreted as the sequence of codewords 01110 – 1110 – 011, but also as the sequence of codewords 011 – 1 – 011 – 10011. Two possible decodings of this encoded string are thus given by cdb and babe. In general, a codeword can be found by the following idea: In the first round, we choose two codewords x 1 {\displaystyle x_{1}} and y 1 {\displaystyle y_{1}} such that x 1 {\displaystyle x_{1}} is a prefix of y 1 {\displaystyle y_{1}} , that is, x 1 w = y 1 {\displaystyle x_{1}w=y_{1}} for some "dangling suffix" w {\displaystyle w} . If one tries first x 1 = 011 {\displaystyle x_{1}={\texttt {011}}} and y 1 = 01110 {\displaystyle y_{1}={\texttt {01110}}} , the dangling suffix is w = 10 {\displaystyle {\texttt {w}}={\texttt {10}}} . If we manage to find two sequences x 2 , … , x p {\displaystyle x_{2},\ldots ,x_{p}} and y 2 , … , y q {\displaystyle y_{2},\ldots ,y_{q}} of codewords such that x 2 ⋯ x p = w y 2 ⋯ y q {\displaystyle x_{2}\cdots x_{p}=wy_{2}\cdots y_{q}} , then we are finished: For then the string x = x 1 x 2 ⋯ x p {\displaystyle x=x_{1}x_{2}\cdots x_{p}} can alternatively be decomposed as y 1 y 2 ⋯ y q {\displaystyle y_{1}y_{2}\cdots y_{q}} , and we have found the desired string having at least two different decompositions into codewords. In the second round, we try out two different approaches: the first trial is to look for a codeword that has w as prefix. Then we obtain a new dangling suffix w, with which we can continue our search. If we eventually encounter a dangling suffix that is itself a codeword (or the empty word), then the search will terminate, as we know there exists a string with two decompositions. The second trial is to seek for a codeword that is itself a prefix of w. In our example, we have w = 10 {\displaystyle w={\texttt {10}}} , and the sequence 1 is a codeword. We can thus also continue with w = 0 {\displaystyle w={\texttt {0}}} as the new dangling suffix. == Precise description of the algorithm == The algorithm is described most conveniently using quotients of formal languages. In general, for two sets of strings D and N, the (left) quotient N − 1 D {\displaystyle N^{-1}D} is defined as the residual words obtained from D by removing some prefix in N. Formally, N − 1 D = { y ∣ x y ∈ D and x ∈ N } {\displaystyle N^{-1}D=\{\,y\mid xy\in D~{\textrm {and}}~x\in N\,\}} . Now let C {\displaystyle C} denote the (finite) set of codewords in the given code. The algorithm proceeds in rounds, where we maintain in each round not only one dangling suffix as described above, but the (finite) set of all potential dangling suffixes. Starting with round i = 1 {\displaystyle i=1} , the set of potential dangling suffixes will be denoted by S i {\displaystyle S_{i}} . The sets S i {\displaystyle S_{i}} are defined inductively as follows: S 1 = C − 1 C ∖ { ε } {\displaystyle S_{1}=C^{-1}C\setminus \{\varepsilon \}} . Here, the symbol ε {\displaystyle \varepsilon } denotes the empty word. S i + 1 = C − 1 S i ∪ S i − 1 C {\displaystyle S_{i+1}=C^{-1}S_{i}\cup S_{i}^{-1}C} , for all i ≥ 1 {\displaystyle i\geq 1} . The algorithm computes the sets S i {\displaystyle S_{i}} in increasing order of i {\displaystyle i} . As soon as one of the S i {\displaystyle S_{i}} contains a word from C or the empty word, then the algorithm terminates and answers that the given code is not uniquely decodable. Otherwise, once a set S i {\displaystyle S_{i}} equals a previously encountered set S j {\displaystyle S_{j}} with j < i {\displaystyle j Read more →

• 

  Artisto

  Artisto is a video processing application with art and movie effects filters based on neural network algorithms created in 2016 by Mail.ru Group machine learning specialists. At the moment the application can process videos up to 10 seconds long and offers users 21 filters, including those based on the works of famous artists (e.g. Blue Dream — Pablo Picasso), theme-based (Rio-2016 — related to the 2016 Summer Olympics in Rio de Janeiro) and others. The app works with both pre-recorded videos and videos recorded with the application. == History == Information on the application first appeared on Mail.ru Group Vice President Anna Artamonova's FB page on July 29, 2016. At the moment of posting there was only an Android version available. According to Anna, the application's first version only took eight days to develop. On July 31, the application was added to the AppStore for free download. From this moment and continuing into the present, Artisto has been the world's first app that uses neural networks for editing short videos, processing them in the style of famous artworks or any other source image. Prisma (app) application developers promise to deliver similar functionality at any moment. The application soon won recognition and started to attract the attention of both international brands (e.g. Korean auto manufacturer Kia Motors) and popular singers and musicians. According to the independent App Annie analysis system, within the first two weeks on the market the application made it onto the TOP download lists in nine countries. == Technology == The idea of transferring styles from works of famous artists to images was first mentioned in September 2015 after the publication of Leon Gatys's article "A Neural Algorithm of Artistic Style", where he described the algorithm in detail. The major shortcoming of this algorithm is its slow performance, which is up to dozens of seconds depending on the algorithm's settings. In March 2016, Russian researcher Dmitry Ulyanov's article was published, where he invented a way to improve the generation of stylized pictures using additional neuron generator network training. With this approach, stylized images can be generated within just dozens of milliseconds. Seventeen days after Ulyanov's article, Justin Johnson published an article containing an identical idea, the only difference being the structure of the generator network. The Artisto application was developed using these open-source technologies, which Mail.ru Group's machine learning specialists improved for faster video processing and better quality.

  Read more →
• 

  World Congress of Universal Documentation

  The World Congress of Universal Documentation was held from 16 to 21 August 1937 in Paris, France. Delegates from 45 countries met to discuss means by which all of the world's information, in print, in manuscript, and in other forms, could be efficiently organized and made accessible. == The Congress in the history of information science == The Congress, held at the Trocadéro under "the auspices" of the Institut International de Bibliographie, was "the apotheosis" of a general movement in the 1930s towards the classification of the growing mass of information and the improvement of access to that information. For the first time in the history of information science, technological means were beginning to catch up with theoretical ends, and the discussions at the conference reflected that fact. Its participation in the Congress was one of the first projects of the American Documentation Institute (ADI). Participants in the conference discussed what has been more recently called "a continuously updated hypertext encyclopedia." Joseph Reagle sees many of the ideas considered at the conference as forerunners of some of the key goals and norms of Wikipedia. == Microfilm == The main resolution adopted by the congress proposed that microfilm be used to make information universally available. Watson Davis, chairman of the American delegation and president of the ADI, stated that the volume of information being produced created difficult problems of access and preservation, but that these could be solved by the use of microfilm. In his address to the Congress, Davis said: Most immediate and practical to put into operation is the microfilming of material in libraries upon demand. It will become fashionable and economical to send a potential book borrower a little strip of microfilm for his permanent possession instead of the book and then badgering him to return it before he has had a chance to use it effectively. I believe that reading machines for microfilm will become as common as typewriters in studies and laboratories. If the principal libraries and information centers of the world will cooperate in such "bibliofilm services," as they are called, if they exchange orders and have essentially uniform methods, forms for ordering, standard microfilm format and production methods and comparable if not uniform prices, the resources of any library will be placed at the disposal of any scholar or scientist anywhere in the world. All the libraries cooperating will merge into one world library without loss of identity or individuality. The world's documentation will become available to even the most isolated and individualistic scholar. The Congress included two separate exhibits on microfilm. One was of the equipment used at the Bibliothèque nationale de France and the other, coordinated by Herman H. Fussler of the University of Chicago, consisting of "an entire microfilm laboratory," complete with cameras, a darkroom, and various kinds of reading machines. Emanuel Goldberg presented a paper on an early copying camera he had invented. Other resolutions passed by the Congress concerned uniform standards for the preparation of articles, for classifying books and other documents, for indexing newspapers and periodicals, and for cooperation between libraries. == H. G. Wells == In his address to the Congress, H. G. Wells said that he thought that his idea of the "world brain" was a precursor to the ideas other delegates were proposing, and explicitly linked the projects being discussed to the work of the encyclopédistes: I am speaking of a process of mental organization throughout the world which I believe to be as inevitable as anything can be in human affairs. All the distresses and horrors of the present time are fundamentally intellectual. The world has to pull its mind together, and this [Congress] is the beginning of its efforts. Civilization is a Phoenix. It perishes in flames and even as it dies it is born again. This synthesis of knowledge upon which you are working is the necessary beginning of a new world. It is good to be meeting here in Paris where the first encyclopedia of power was made. It would be impossible to overrate our debt to Diderot and his associates. == Other participants == Participants in the Congress included authors, librarians, scholars, archivists, scientists, and editors. Some of the notable people in attendance not mentioned above were:

  Read more →
• 

  Outline of the Python programming language

  The following outline is provided as an overview of and topical guide to Python: Python is a general-purpose, interpreted, object-oriented, functional, multi-paradigm, and dynamically typed programming language known for its emphasis on code readability and broad standard library. Python was created by Guido van Rossum and first released in 1991. It emphasizes code readability and developer productivity. == What type of language is Python? == Programming language — artificial language designed to communicate instructions to a machine. Object-oriented programming — built primarily around objects and classes. Functional programming — supports functions as first-class objects. Scripting language — often used for automation and small programs. General-purpose programming language — designed for a wide variety of application domains. Dynamically typed — type checking occurs at runtime. Interpreted language — code is executed by an interpreter. Multi-paradigm — supports procedural, object-oriented, and functional programming. == History of Python == ABC (programming language) – precursor to Python Python was started by Guido van Rossum in 1989 and first released in 1991. Python 2 — major version released in 2000, officially retired in 2020. Python 3 — released in 2008 == General Python concepts == == Issues and limitations == Performance — generally slower than many compiled languages such as C or Java can be mitigated by C extensions or JIT compilers (PyPy). Global interpreter lock — limits parallel CPU-bound threads in CPython Memory consumption — high memory use compared to some lower-level languages Version compatibility — Python 2 vs Python 3 differences caused migration issues == Python implementations == CPython — reference implementation in C IronPython — Python for .NET Jython — Python for the JVM MicroPython — Python for microcontrollers and embedded systems Nuitka — compiler that packages user code with CPython into a static binary PyPy — JIT-compiled Python interpreter for speed PythonAnywhere — freemium hosted Python installation that runs in the browser Stackless Python — Python with lightweight concurrency features == Python toolchain == List of Python software Comparison of Python IDEs Comparison of server-side web frameworks for Python List of Python frameworks List of Python libraries List of unit testing frameworks for Python Python Package Index == Notable projects using Python == YouTube (backend) Instagram (backend) Dropbox Reddit OpenStack Blender (scripting and plugins) SageMath NumPy Pandas TensorFlow == Python development communities == ActiveState — commercial Python distributions and support Anaconda, Inc. — Python data science ecosystem GitHub Python Software Foundation Python Package Index (PyPI) — third-party software repository for Python == Example source code == Articles with example Python code == Python publications == === Books about Python === Automate the Boring Stuff with Python – Creative Commons Python book Alex Martelli — Python in a Nutshell and Python Cookbook Mark Pilgrim – Dive into Python Naomi Ceder — The Quick Python Book Wes McKinney — Python for Data Analysis Zed Shaw – Learn Python the Hard Way === Textbooks === Core Python Programming == Python programmers == == Python conferences == EuroPython – annual Python conference in Europe PyCon – the largest annual convention for the Python community PyData – conference series focused on data analysis, machine learning, and scientific computing with Python SciPy Conferences – focused on the use of Python in scientific computing and research DjangoCon – a conference dedicated to the Django web framework PyOhio – a free regional Python conference held in Ohio == Python learning resources == Codecademy – interactive Python programming lessons GeeksforGeeks – tutorials, coding examples, and interactive programming for Python concepts and data structures. Kaggle – free Python courses focused on data science and machine learning. Python.org Tutorial – the official Python tutorial from the Python Software Foundation. Real Python – articles, tutorials, and courses for Python developers. W3Schools – beginner-friendly Python tutorials. Wikibooks Python Programming – free open-content textbook on Python. === Competitive programming === Codeforces – an online platform for programming contests that supports Python submissions Codewars – gamified coding challenges supporting Python HackerRank – competitive programming and interview preparation site with Python challenges Kaggle – while focused on data science competitions, it also includes Python-based problem solving. LeetCode – online judge and problem-solving platform where Python is widely used

  Read more →
• 

  Artificial empathy

  Artificial empathy or computational empathy is the development of AI systems—such as companion robots or virtual agents—that can detect emotions and respond to them in an empathic way. Although such technology can be perceived as scary or threatening, it could also have a significant advantage over humans for roles in which emotional expression can be important, such as in the health care sector. An October 2025 review and meta-analysis in the British Medical Bulletin found that AI chatbots were rated as showing more empathy than human healthcare professionals in 13 of 15 studies that compared them. Care-givers who perform emotional labor above and beyond the requirements of paid labor can experience chronic stress or burnout, and can become desensitized to patients. Artificial empathy could also help the socialization of care-givers, or serve as role model for emotional detachment. A broader definition of artificial empathy is "the ability of nonhuman models to predict a person's internal state (e.g., cognitive, affective, physical) given the signals (s)he emits (e.g., facial expression, voice, gesture) or to predict a person's reaction (including, but not limited to internal states) when he or she is exposed to a given set of stimuli (e.g., facial expression, voice, gesture, graphics, music, etc.)". A 2025 study reported that some multimodal large language models can recognize basic facial expressions with human-level accuracy on a commonly used research dataset of posed facial expressions. == Areas of research == There are a variety of philosophical, theoretical, and applicative questions related to artificial empathy. For example: Which conditions would have to be met for a robot to respond competently to a human emotion? What models of empathy can or should be applied to Social and Assistive Robotics? Must the interaction of humans with robots imitate affective interaction between humans? Can a robot help science learn about affective development of humans? Would robots create unforeseen categories of inauthentic relations? What relations with robots can be considered authentic? How can we assess artificial empathy in AI systems? == Examples of artificial empathy research and practice == People often communicate and make decisions based on inferences about each other's internal states (e.g., emotional, cognitive, and physical states) that are in turn based on signals emitted by the person such as facial expression, body gesture, voice, and words. Broadly speaking, artificial empathy focuses on developing non-human models that achieve similar objectives using similar data. === Streams of artificial empathy research === Artificial empathy has been applied in various research disciplines, including artificial intelligence and business. Two main streams of research in this domain are: the use of nonhuman models to predict a person's internal state (e.g., cognitive, affective, physical) given the signals he or she emits (e.g., facial expression, voice, gesture) the use of nonhuman models to predict a person's reaction when he or she is exposed to a given set of stimuli (e.g., facial expression, voice, gesture, graphics, music, etc.). Research on affective computing, such as emotional speech recognition and facial expression detection, falls within the first stream of artificial empathy. Contexts that have been studied include oral interviews, call centers, human-computer interaction, sales pitches, and financial reporting. The second stream of artificial empathy has been researched more in marketing contexts, such as advertising, branding, customer reviews, in-store recommendation systems, movies, and online dating. === Artificial empathy applications in practice === With the increasing volume of visual, audio, and text data in commerce, many business applications for artificial empathy have followed. For example, Affectiva analyses viewers' facial expressions from video recordings while they are watching video advertisements in order to optimize the content design of video ads. Software like HireVue, BarRaiser, a hiring intelligence firm, helps firms make recruitment decisions by analyzing audio and video information from candidates' video interviews. Lapetus Solutions develops a model to estimate an individual's longevity, health status, and disease susceptibility from a face photo. Their technology has been applied in the insurance industry. == Artificial empathy and human services == Although artificial intelligence cannot yet replace social workers themselves, the technology has been deployed in that field. Florida State University published a study about Artificial Intelligence being used in the human services field. The research used computer algorithms to analyze health records for combinations of risk factors that could predict a future suicide attempt. The article reports, "machine learning—a future frontier for artificial intelligence—can predict with 80% to 90% accuracy whether someone will attempt suicide as far off as two years into the future. The algorithms become even more accurate as a person's suicide attempt gets closer. For example, the accuracy climbs to 92% one week before a suicide attempt when artificial intelligence focuses on general hospital patients". Such algorithmic machines can help social workers. Social work operates on a cycle of engagement, assessment, intervention, and evaluation with clients. Earlier assessment for risk of suicide can lead to earlier interventions and prevention, therefore saving lives. The system would learn, analyze, and detect risk factors, alerting the clinician of a patient's suicide risk score (analogous to a patient's cardiovascular risk score). Then, social workers could step in for further assessment and preventive intervention.

  Read more →
• 

  Australian Geoscience Data Cube

  The Australian Geoscience Data Cube (AGDC) is an approach to storing, processing and analyzing large collections of Earth observation data. The technology is designed to meet challenges of national interest by being agile and flexible with vast amounts of layered grid data. The AGDC reduces processing time of traditional image analysis by calibrating, pre-computing known extents, pixel alignment and storing metadata in a cell lattice structure. The temporal-pixel aligned data can often be analysed faster across space and time dimensions than previous scene based techniques. This allows the AGDC to be flexible in tackling future challenges and improve analysis times on every-increasing data repositories of earth observation. The AGDC has also been used internationally to allow countries to maintain ecologically sustainable programs and reduce the difficulty curve of utilizing Remote Sensing data. == Background == The AGDC was originally conceived by Geoscience Australia but is now maintained in a partnership between Geoscience Australia, Commonwealth Scientific and Industrial Research Organisation (CSIRO) and National Computational Infrastructure National Facility (Australia) (NCI). This is made possible by the funding from the partnership and a number of organisations such as National Collaborative Research Infrastructure Strategy (NCRIS). == Analysis ready data, ingestion and indexing == The data processed in the cube is made analysis ready before being ingested and indexed into the AGDC. Analysis ready data is pre-processed data that has applied corrections for instrument calibration (gains and offsets), geolocation (spatial alignment) and radiometry (solar illumination, incidence angle, topography, atmospheric interference). The ingestion process manages the translation of datasets into the storage units while maintaining a database index. The data within the storage and index can be accessed via API calls often compiled within code such as Python (programming language). Example: s2a_l1c = dc.load(product='s2a_level1c_granule',x=(147.36, 147.41), y=(-35.1, -35.15), measurements=['04','03','02'], output_crs='EPSG:4326', resolution=(-0.00025,0.00025)) === Datasets currently stored === Geoscience Australia Landsat Surface Reflectance (1987 to present) Landsat Pixel Quality Landsat Fractional Cover Landsat NDVI === Datasets that have been piloted === USGS Landsat Surface Reflectance SRTM DEM Himawari 8 MODIS Sentinel-2 L1C / S2A Australian Gridded Climate Data == Open source == The AGDC code base is situated in GitHub as an open repository. The core code base moved to the Open Data Cube in early 2017 as part of an international collaboration. Whilst the code base is the Open Data Cube, individual cubes exist as their own right such as the AGDC on the National Computational Infrastructure National Facility (Australia) (NCI) using the High-Performance Computing Cluster HPCC. The core code can be installed on personal computers or public computers (using git) and has many unit tests. Documentation for the code base exists on Read the Docs. == Challenges of the AGDC == The AGDC is designed to meet nationally significant challenges such as the following. Sustainability Environment Water resource management Disaster assist Policy development Community planning Forest preservation Carbon measurement == International awards == The AGDC won the 2016 Content Platform of the Year award from Geospatial World Forum.

  Read more →
• 

  Gutmann method

  The Gutmann method is an algorithm for securely erasing the contents of computer hard disk drives, such as files. Devised by Peter Gutmann and Colin Plumb and presented in the paper Secure Deletion of Data from Magnetic and Solid-State Memory in July 1996, it involved writing a series of 35 patterns over the region to be erased. The selection of patterns assumes that the user does not know the encoding mechanism used by the drive, so it includes patterns designed specifically for three types of drives. A user who knows which type of encoding the drive uses can choose only those patterns intended for their drive. A drive with a different encoding mechanism would need different patterns. Most of the patterns in the Gutmann method were designed for older MFM/RLL-encoded disks. Gutmann himself has noted that more modern drives no longer use these older encoding techniques, making parts of the method irrelevant. He said "In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques". Since about 2001, some ATA IDE and SATA hard drive manufacturer designs include support for the ATA Secure Erase standard, obviating the need to apply the Gutmann method when erasing an entire drive. The Gutmann method does not apply to USB sticks: a 2011 study reports that 71.7% of data remained available. On solid state drives it resulted in 0.8–4.3% recovery. == Background == The delete function in most operating systems simply marks the space occupied by the file as reusable (removes the pointer to the file) without immediately removing any of its contents. At this point the file can be fairly easily recovered by numerous recovery applications. However, once the space is overwritten with other data, there is no known way to use software to recover it. It cannot be done with software alone since the storage device only returns its current contents via its normal interface. Gutmann claims that intelligence agencies have sophisticated tools, including magnetic force microscopes, which together with image analysis, can detect the previous values of bits on the affected area of the media (for example hard disk). This claim however seems to be invalid based on the thesis "Data Reconstruction from a Hard Disk Drive using Magnetic Force Microscopy". == Method == An overwrite session consists of a lead-in of four random write patterns, followed by patterns 5 to 31 (see rows of table below), executed in a random order, and a lead-out of four more random patterns. Each of patterns 5 to 31 was designed with a specific magnetic media encoding scheme in mind, which each pattern targets. The drive is written to for all the passes even though the table below only shows the bit patterns for the passes that are specifically targeted at each encoding scheme. The result should obscure any data on the drive so that only the most advanced physical scanning (e.g., using a magnetic force microscope) of the drive is likely to be able to recover any data. The series of patterns is as follows: Encoded bits shown in bold are what should be present in the ideal pattern, although due to the encoding the complementary bit is actually present at the start of the track. == Criticism == Daniel Feenberg of the National Bureau of Economic Research, an American private nonprofit research organization, criticized Gutmann's claim that intelligence agencies are likely to be able to read overwritten data, citing a lack of evidence for such claims. He finds that Gutmann cites one non-existent source and sources that do not actually demonstrate recovery, only partially-successful observations. The definition of "random" is also quite different from the usual one used: Gutmann expects the use of pseudorandom data with sequences known to the recovering side, not an unpredictable one such as a cryptographically secure pseudorandom number generator. Nevertheless, some published government security procedures consider an overwritten disk to still be sensitive. Human factors and potential limitations in the overwriting software create a residual risk that is not considered acceptable at the highest security levels. Gutmann himself has responded to some of these criticisms and also criticized how his algorithm has been abused in an epilogue to his original paper, in which he states: In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques. As a result, they advocate applying the voodoo to PRML and EPRML drives even though it will have no more effect than a simple scrubbing with random data. In fact performing the full 35-pass overwrite is pointless for any drive since it targets a blend of scenarios involving all types of (normally-used) encoding technology, which covers everything back to 30+-year-old MFM methods (if you don't understand that statement, re-read the paper). If you're using a drive which uses encoding technology X, you only need to perform the passes specific to X, and you never need to perform all 35 passes. For any modern PRML/EPRML drive, a few passes of random scrubbing is the best you can do. As the paper says, "A good scrubbing with random data will do about as well as can be expected". This was true in 1996, and is still true now. Gutmann's statement has been criticized for not recognizing that PRML/EPRML does not replace RLL, with critics claiming PRML/EPRML to be a signal detection method rather than a data encoding method. Polish data recovery service Kaleron has also claimed that Gutmann's publication contains further factual errors and assumptions that do not apply to actual disks.

  Read more →
• 

  Windows Live OneCare Safety Scanner

  Windows Live OneCare Safety Scanner (formerly Windows Live Safety Center and codenamed Vegas) was an online scanning, PC cleanup, and diagnosis service to help remove of viruses, spyware/adware, and other malware. It was a free web service that was part of Windows Live. On November 18, 2008, Microsoft announced the discontinuation of Windows Live OneCare, offering users a new free anti-malware suite Microsoft Security Essentials, which had been available since the second half of 2009. However, Windows Live OneCare Safety Scanner, under the same branding as Windows Live OneCare, was not discontinued during that time. The service was officially discontinued on April 15, 2011 and replaced with Microsoft Safety Scanner. == Overview == Windows Live OneCare Safety Scanner offered a free online scanning and protection from threats. The Windows Live OneCare Safety Scanner must be downloaded and installed to your computer to scan your computer. The "Full Service Scan" looks for common PC health issues such as viruses, temporary files, and open network ports. It searches and removes viruses, improves a computer's performance, and removes unnecessary clutter on the PC's hard disk. The user can choose between a "Full Scan" (which can be customized) or a "Quick Scan". The "Full Scan" scans for viruses (comprehensive scan or quick scan), hard disk performance (Disk fragmentation scan and/or Desk cleanup scan) and network safety (open port scan). The "Quick Scan" only scans for viruses, only on specific areas on the computer. The quick scan is faster than the full scan, hence that appellation. The service also provides a virus database, information about online threats, and general computer security documentation and tools. == Limits == The virus scanner on the Windows Live OneCare Safety Scanner site runs a scan of the user's computer only when the site is visited. It does not run periodic scans of the system, and does not provide features to prevent viruses from infecting the computer at the time, or thereafter. It simply resolves detected infections. Many users who have posted on the Product Feedback forum report script errors relating to Internet Explorer 7 (besides IE being the only browser supported by this service). The OneCare safety scanner team have been actively solving these problems, many of them registry-related.

  Read more →
• 

  Automated journalism

  Automated journalism, also known as algorithmic journalism or robot journalism, is a term that attempts to describe modern technological processes that are now in use in the journalistic profession, such as news articles and videos generated by computer programs. There are four main fields of application for automated journalism, namely automated content production, data mining, news dissemination and content optimization. Through generative artificial intelligence, stories are produced automatically by computers rather than human reporters. In the 2020s, generative pre-trained transformers have enabled the generation of articles, simply by providing prompts. Automated journalism is sometimes seen as an opportunity to free journalists from routine reporting, providing them with more time for complex tasks. It also allows efficiency and cost-cutting, alleviating some financial burden that many news organizations face. However, automated journalism is also perceived as a threat to the authorship and quality of news and a threat to the livelihoods of human journalists. == History == Historically, the process involved an algorithm that scanned large amounts of provided data, selected from an assortment of pre-programmed article structures, ordered key points, and inserted details such as names, places, amounts, rankings, statistics, and other figures. These programs interpret, organize, and present data in human-readable ways. The output can also be customized to fit a certain voice, tone, or style. Early implementations were mainly used for stories based on statistics and numerical figures. Common topics include sports recaps, weather, financial reports, real estate analysis, and earnings reviews. Data science and AI companies such as Automated Insights, Narrative Science, United Robots and Monok develop and provide these algorithms to news outlets. In 2016, early adopters included news providers such as the Associated Press, Forbes, ProPublica, and the Los Angeles Times. StatSheet, an online platform covering college basketball, runs entirely on an automated program. In 2006, Thomson Reuters announced their switch to automation to generate financial news stories on its online news platform. Reuters used a tool called Tracer. An algorithm called Quakebot published a story about a 2014 California earthquake on The Los Angeles Times website within three minutes after the shaking had stopped. The Associated Press began using automation to cover 10,000 minor baseball leagues games annually, using a program from Automated Insights and statistics from MLB Advanced Media. Outside of sports, the Associated Press also uses automation to produce stories on corporate earnings. Since 2014, Associated Press has been publishing quarterly financial stories with help from Automated Insights. In May 2020, Microsoft announced that a number of its MSN contract journalists would be replaced by robot journalism. On 8 September 2020, The Guardian published an article entirely written by the neural network GPT-3, although the published fragments were manually picked by a human editor. Agentic Tribune produces all of its news articles automatically using AI. News broadcasters in Kuwait, Greece, South Korea, India, China and Taiwan have presented news with anchors based on generative AI models, prompting concerns about job losses for human anchors and audience trust in news that has historically been influenced by parasocial relationships with broadcasters, content creators or social media influencers. Algorithmically generated anchors have also been used by allies of ISIS for their broadcasts. In 2023, Google reportedly pitched a tool to news outlets that claimed to "produce news stories" based on input data provided, such as "details of current events". Some news company executives who viewed the pitch described it as "[taking] for granted the effort that went into producing accurate and artful news stories." In February 2024, Google launched a program to pay small publishers to write three articles per day using a beta generative AI model. The program does not require the knowledge or consent of the websites that the publishers are using as sources, nor does it require the published articles to be labeled as being created or assisted by these models. Meta AI, a chatbot based on Llama 3 which summarizes news stories, was noted by The Washington Post to copy sentences from those stories without direct attribution and to potentially further decrease the traffic of online news outlets. == Benefits == === Speed === Robot reporters are built to produce large quantities of information at quicker speeds. The Associated Press announced that their use of automation has increased the volume of earnings reports from customers by more than ten times. With software from Automated Insights and data from other companies, they can produce 150 to 300-word articles in the same time it takes journalists to crunch numbers and prepare information. By automating routine stories and tasks, journalists are promised more time for complex jobs such as investigative reporting and in-depth analysis of events. Francesco Marconi of the Associated Press stated that, through automation, the news agency freed up 20 percent of reporters’ time to focus on higher-impact projects. This has also been stated by a spokesperson at Gannett, who stated "By leveraging AI, we are able to expand coverage and enable our journalists to focus on more in-depth reporting." GBH reports that AI tools help increase the reach of news publishers. Mike Carragi, a product manager at Patch, stated that they were able to increase their reach from 1200 communities to 7000 communities in just a few months without the need for new employees solely through the adoption of generative AI. In fact, many communities are served solely by AI generated content, which creates summaries of existing information within the community. === Cost === Automated journalism is cheaper because more content can be produced within less time. It also lowers labour costs for news organizations. Reduced human input means less expenses on wages or salaries, paid leaves, vacations, and employment insurance. Automation serves as a cost-cutting tool for news outlets struggling with tight budgets but still wish to maintain the scope and quality of their coverage. == Concerns == === Authorship === In an automated story, there is often confusion about who should be credited as the author. Several participants of a study on algorithmic authorship attributed the credit to the programmer; others perceived the news organization as the author, emphasizing the collaborative nature of the work. There is also no way for the reader to verify whether an article was written by a robot or human, which raises issues of transparency although such issues also arise with respect to authorship attribution between human authors too. === Credibility and quality === Concerns about the perceived credibility of automated news is similar to concerns about the perceived credibility of news in general. Critics doubt if algorithms are "fair and accurate, free from subjectivity, error, or attempted influence." Again, these issues about fairness, accuracy, subjectivity, error, and attempts at influence or propaganda has also been present in articles written by humans over thousands of years. A common criticism is that machines do not replace human capabilities such as creativity, humour, and critical-thinking. However, as the technology evolves, the aim is to mimic human characteristics. When the UK's Guardian newspaper used an AI to write an entire article in September 2020, commentators pointed out that the AI still relied on human editorial content. Austin Tanney, the head of AI at Kainos said: "The Guardian got three or four different articles and spliced them together. They also gave it the opening paragraph. It doesn’t belittle what it is. It was written by AI, but there was human editorial on that." The largest single study of readers' evaluations of news articles produced with and without the help of automation exposed 3,135 online news consumers to 24 articles. It found articles that had been automated were significantly less comprehensible, in part because they were considered to contain too many numbers. However, the automated articles were evaluated equally on other criteria including tone, narrative flow, and narrative structure. Beyond human evaluation, there are now numerous algorithmic methods to identify machine written articles although some articles may still contain errors that are obvious for a human to identify, they can at times score better with these automatic identifiers than human-written articles. A 2017 Nieman Reports article by Nicola Bruno discusses whether or not machines will replace journalists and addresses concerns around the concept of automated journalism practices. Ultimately, Bruno came to the conclusion that AI would assist journalist

  Read more →
• 

  Synthetic data

  Synthetic data are artificially generated data not produced by real-world events. Typically created using algorithms, synthetic data can be deployed to validate mathematical models and to train machine learning models. Data generated by a computer simulation can be seen as synthetic data. This encompasses most applications of physical modeling, such as music synthesizers or flight simulators. The output of such systems approximates the real thing, but is fully algorithmically generated. Synthetic data is used in a variety of fields as a filter for information that would otherwise compromise the confidentiality of particular aspects of the data. In many sensitive applications, datasets theoretically exist but cannot be released to the general public; synthetic data sidesteps the privacy issues that arise from using real consumer information without permission or compensation. == Usefulness == Synthetic data is generated to meet specific needs or certain conditions that may not be found in the original, real data. One of the hurdles in applying up-to-date machine learning approaches for complex scientific tasks is the scarcity of labeled data, a gap effectively bridged by the use of synthetic data, which closely replicates real experimental data. This can be useful when designing many systems, from simulations based on theoretical value, to database processors, etc. This helps detect and solve unexpected issues such as information processing limitations. Synthetic data are often generated to represent the authentic data and allows a baseline to be set. Another benefit of synthetic data is to protect the privacy and confidentiality of authentic data, while still allowing for use in testing systems. Computer security experts claim generated synthetic data "... enables us to create realistic behavior profiles for users and attackers. The data is used to train the fraud detection system itself, thus creating the necessary adaptation of the system to a specific environment." In defense and military contexts, synthetic data is seen as a potentially valuable tool to develop and improve complex AI systems, particularly in contexts where high-quality real-world data is scarce. At the same time, synthetic data together with the testing approach can give the ability to model real-world scenarios. == History == Scientific modelling of physical systems has a long history that runs concurrent with the history of physics. For example, research into synthesis of audio and voice can be traced back to the 1930s and before, driven forward by the developments of the telephone and audio recording technologies. Digitization gave rise to software synthesizers from the 1970s onwards. In the context of privacy-preserving statistical analysis, in 1993, the idea of original fully synthetic data was created by Donald Rubin. Rubin originally designed this to synthesize the Decennial Census long form responses for the short form households. He then released samples that did not include any actual long form records - in this he preserved anonymity of the household. Later that year, the idea of original partially synthetic data was created by Little. Little used this idea to synthesize the sensitive values on the public use file. A 1993 work fitted a statistical model to 60,000 MNIST digits, then it was used to generate over 1 million examples. Those were used to train a LeNet-4 to reach state of the art performance. In 1994, Stephen Fienberg introduced 'critical refinement', in which a parametric posterior predictive distribution (instead of a Bayes bootstrap) is used to do the sampling. Later, other important contributors to the development of synthetic data generation were Trivellore Raghunathan, Jerry Reiter, Donald Rubin, John M. Abowd, and Jim Woodcock. Collectively they came up with a solution for how to treat partially synthetic data with missing data. Similarly, they developed the technique of Sequential Regression Multivariate Imputation. == Calculations == Researchers test the framework on synthetic data, which is "the only source of ground truth on which they can objectively assess the performance of their algorithms". Synthetic data can be generated through the use of random lines, having different orientations and starting positions. Datasets can get fairly complicated. A more complicated dataset can be generated by using a synthesizer build. To create a synthesizer build, first use the original data to create a model or equation that fits the data the best. This model or equation will be called a synthesizer build. This build can be used to generate more data. Constructing a synthesizer build involves constructing a statistical model. In a linear regression line example, the original data can be plotted, and a best fit linear line can be created from the data. This line is a synthesizer created from the original data. The next step will be generating more synthetic data from the synthesizer build or from this linear line equation. In this way, the new data can be used for studies and research, and it protects the confidentiality of the original data. David Jensen from the Knowledge Discovery Laboratory explains how to generate synthetic data: "Researchers frequently need to explore the effects of certain data characteristics on their data model." To help construct datasets exhibiting specific properties, such as auto-correlation or degree disparity, proximity can generate synthetic data having one of several types of graph structure: random graphs that are generated by some random process; lattice graphs having a ring structure; lattice graphs having a grid structure, etc. In all cases, the data generation process follows the same process: Generate the empty graph structure. Generate attribute values based on user-supplied prior probabilities. Since the attribute values of one object may depend on the attribute values of related objects, the attribute generation process assigns values collectively. == Applications == === Fraud detection and confidentiality systems === Testing and training fraud detection and confidentiality systems are devised using synthetic data. Specific algorithms and generators are designed to create realistic data, which then assists in teaching a system how to react to certain situations or criteria. For example, intrusion detection software is tested using synthetic data. This data is a representation of the authentic data and may include intrusion instances that are not found in the authentic data. The synthetic data allows the software to recognize these situations and react accordingly. If synthetic data was not used, the software would only be trained to react to the situations provided by the authentic data and it may not recognize another type of intrusion. === Scientific research === Researchers doing clinical trials or any other research may generate synthetic data to aid in creating a baseline for future studies and testing. Real data can contain information that researchers may not want released, so synthetic data is sometimes used to protect the privacy and confidentiality of a dataset. Using synthetic data reduces confidentiality and privacy issues since it holds no personal information and cannot be traced back to any individual. Beyond privacy protection, synthetic data is also being explored for methodological innovation in drug development. For instance, synthetic data may be used to construct synthetic control arms as an alternative to conventional external control arms based on real-world data (RWD) or randomized controlled trials (RCTs). Collectively, regulatory agencies such as the FDA and EMA appear to be at various stages of recognizing and integrating AI-generated synthetic data into their methodologies. While there is growing consensus on the potential of such data to support model development and the broader lifecycle of medicinal products, to date no drug or medical device has been approved using solely or predominantly synthetic data—particularly not as a comparator arm generated entirely via data-driven algorithms. The quality and statistical handling of synthetic data are expected to become more prominent in future regulatory discussions, particularly in contexts such as predictive modeling (e.g., digital twins), where innovative approaches have already been referenced. === Machine learning === Synthetic data is increasingly being used for machine learning applications: a model is trained on a synthetically generated dataset with the intention of transfer learning to real data. Efforts have been made to enable more data science experiments via the construction of general-purpose synthetic data generators, such as the Synthetic Data Vault. In general, synthetic data has several natural advantages: once the synthetic environment is ready, it is fast and cheap to produce as much data as needed; synthetic data can have perfectly accurate labels, including labeling that may be very expensive or impo

  Read more →
• 

  Artificial intuition

  Artificial intuition is a theoretical capacity of an artificial software to function similarly to human consciousness, specifically in the capacity of human consciousness known as intuition. == Comparison of human and the theoretically artificial == Intuition is the function of the mind, the experience of which, is described as knowledge based on "a hunch", resulting (as the word itself does) from "contemplation" or "insight". Psychologist Jean Piaget showed that intuitive functioning within the normally developing human child at the Intuitive Thought Substage of the preoperational stage occurred at from four to seven years of age. In Carl Jung's concept of synchronicity, the concept of "intuitive intelligence" is described as something like a capacity that transcends ordinary-level functioning to a point where information is understood with a greater depth than is available in more simple rationally-thinking entities. Artificial intuition is theoretically (or otherwise) a sophisticated function of an artifice that is able to interpret data with depth and locate hidden factors functioning in Gestalt psychology, and that intuition in the artificial mind would, in the context described here, be a bottom-up process upon a macroscopic scale identifying something like the archetypal (see τύπος). To create artificial intuition supposes the possibility of the re-creation of a higher functioning of the human mind, with capabilities such as what might be found in semantic memory and learning. The transferral of the functioning of a biological system to synthetic functioning is based upon modeling of functioning from knowledge of cognition and the brain, for instance as applications of models of artificial neural networks from the research done within the discipline of computational neuroscience. == Application software contributing to its development == The notion of a process of a data-interpretative synthesis has already been found in a computational-linguistic software application that has been created for use in an internal security context. The software integrates computed data based specifically on objectives incorporating a paradigm described as "religious intuitive" (hermeneutic), functional to a degree that represents advances upon the performance of generic lexical data mining.

  Read more →
• 

  Blitter object

  A blitter object (Bob) is a graphical element (GEL) used by the Amiga computer. Bobs are hardware sprite-like objects, movable on the screen with the help of the blitter coprocessor. == Overview == The AmigaOS GEL system consists of VSprites, Bobs, AnimComps (animation components) and AnimObs (animation objects), each extending the preceding with additional functionality. While VSprites are a virtualization of hardware sprites Bobs are drawn into a playfield by the blitter, saving and restoring the background of the GEL as required. The Bob with the highest video priority is the last one to be drawn, which makes it appear to be in front of all other Bobs. In contrast to hardware sprites Bobs are not limited in size and number. Bobs require more processing power than sprites, because they require at least one DMA memory copy operation to draw them on the screen. Sometimes three distinct memory copy operations are needed: one to save the screen area where the Bob would be drawn, one to actually draw the Bob, and one later to restore the screen background when the Bob moves away. An AnimComp adds animation to a Bob and an AnimOb groups AnimComps together and assigns them velocity and acceleration.

  Read more →
• 

  Xulvi-Brunet–Sokolov algorithm

  Xulvi-Brunet and Sokolov's algorithm generates networks with chosen degree correlations. This method is based on link rewiring, in which the desired degree is governed by parameter ρ. By varying this single parameter it is possible to generate networks from random (when ρ = 0) to perfectly assortative or disassortative (when ρ = 1). This algorithm allows to keep network's degree distribution unchanged when changing the value of ρ. == Assortative model == In assortative networks, well-connected nodes are likely to be connected to other highly connected nodes. Social networks are examples of assortative networks. This means that an assortative network has the property that almost all nodes with the same degree are linked only between themselves. The Xulvi-Brunet–Sokolov algorithm for this type of networks is the following. In a given network, two links connecting four different nodes are chosen randomly. These nodes are ordered by their degrees. Then, with probability ρ, the links are randomly rewired in such a way that one link connects the two nodes with the smaller degrees and the other connects the two nodes with the larger degrees. If one or both of these links already existed in the network, the step is discarded and is repeated again. Thus, there will be no self-connected nodes or multiple links connecting the same two nodes. Different degrees of assortativity of a network can be achieved by changing the parameter ρ. Assortative networks are characterized by highly connected groups of nodes with similar degree. As assortativity grows, the average path length and clustering coefficient increase. == Disassortative model == In disassortative networks, highly connected nodes tend to connect to less-well-connected nodes with larger probability than in uncorrelated networks. Examples of such networks include biological networks. The Xulvi-Brunet and Sokolov's algorithm for this type of networks is similar to the one for assortative networks with one minor change. As before, two links of four nodes are randomly chosen and the nodes are ordered with respect to their degrees. However, in this case, the links are rewired (with probability p) such that one link connects the highest connected node with the node with the lowest degree and the other link connects the two remaining nodes randomly with probability 1 − ρ. Similarly, if the new links already existed, the previous step is repeated. This algorithm does not change the degree of nodes and thus the degree distribution of the network.

  Read more →
• 

  Applied Information Science in Economics

  The Applied Information Science in Economics (Russian: Прикладная информатика в Экономике) or Applied Computer Science in Economics is a professional qualification generally awarded in Russian Federation. The degree inherited from the U.S.S.R. education system also known as Specialist degree. The degree is awarded after five years of full-time study and includes several internships, course-works, thesis writing and defense. The degree has similarities with German Magister Artium or Diplom degree. However, due to the Bologna Process number of such degrees are declining. Degree focuses on applying mathematical methods in economics involving maximum information technology. It is very close to applied mathematics, but includes also major part of computer science. == List of specialty codes in the education system == 080801 - Applied computer science in economics 351400 - Applied computer science == Fields of activity == Organization and management; Project design; Experimental research; Marketing; Consulting; Operational and Maintenance. == Major == Information Science and Programming. High Level Methods of Information Science and Programming. Information Technologies in Economics. Computer Systems, Networks and Telecommunications Services. Operational Environments, Systems and Shells. Architecture and Design of Information Systems for Companies. Data Bases. Information security. Information Management. Imitative Simulation.

  Read more →