AI Email Helper

AI Email Helper — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Geometric primitive

  In vector computer graphics, CAD systems, and geographic information systems, a geometric primitive (or prim) is the simplest (i.e. 'atomic' or irreducible) geometric shape that the system can handle (draw, store). Sometimes the subroutines that draw the corresponding objects are called "geometric primitives" as well. The most "primitive" primitives are point and straight line segments, which were all that early vector graphics systems had. In constructive solid geometry, primitives are simple geometric shapes such as a cube, cylinder, sphere, cone, pyramid, torus. Modern 2D computer graphics systems may operate with primitives which are curves (segments of straight lines, circles and more complicated curves), as well as shapes (boxes, arbitrary polygons, circles). A common set of two-dimensional primitives includes lines, points, and polygons, although some people prefer to consider triangles primitives, because every polygon can be constructed from triangles (polygon triangulation). All other graphic elements are built up from these primitives. In three dimensions, triangles or polygons positioned in three-dimensional space can be used as primitives to model more complex 3D forms. In some cases, curves (such as Bézier curves, circles, etc.) may be considered primitives; in other cases, curves are complex forms created from many straight, primitive shapes. == Common primitives == The set of geometric primitives is based on the dimension of the region being represented: Point (0-dimensional), a single location with no height, width, or depth. Line or curve (1-dimensional), having length but no width, although a linear feature may curve through a higher-dimensional space. Planar surface or curved surface (2-dimensional), having length and width. Volumetric region or solid (3-dimensional), having length, width, and depth. In GIS, the terrain surface is often spoken of colloquially as "2 1/2 dimensional," because only the upper surface needs to be represented. Thus, elevation can be conceptualized as a scalar field property or function of two-dimensional space, affording it a number of data modeling efficiencies over true 3-dimensional objects. A shape of any of these dimensions greater than zero consists of an infinite number of distinct points. Because digital systems are finite, only a sample set of the points in a shape can be stored. Thus, vector data structures typically represent geometric primitives using a strategic sample, organized in structures that facilitate the software interpolating the remainder of the shape at the time of analysis or display, using the algorithms of Computational geometry. A Point is a single coordinate in a Cartesian coordinate system. Some data models allow for Multipoint features consisting of several disconnected points. A Polygonal chain or Polyline is an ordered list of points (termed vertices in this context). The software is expected to interpolate the intervening shape of the line between adjacent points in the list as a parametric curve, most commonly a straight line, but other types of curves are frequently available, including circular arcs, cubic splines, and Bézier curves. Some of these curves require additional points to be defined that are not on the line itself, but are used for parametric control. A Polygon is a polyline that closes at its endpoints, representing the boundary of a two-dimensional region. The software is expected to use this boundary to partition 2-dimensional space into an interior and exterior. Some data models allow for a single feature to consist of multiple polylines, which could collectively connect to form a single closed boundary, could represent a set of disjoint regions (e.g., the state of Hawaii), or could represent a region with holes (e.g., a lake with an island). A Parametric shape is a standardized two-dimensional or three-dimensional shape defined by a minimal set of parameters, such as an ellipse defined by two points at its foci, or three points at its center, vertex, and co-vertex. A Polyhedron or Polygon mesh is a set of polygon faces in three-dimensional space that are connected at their edges to completely enclose a volumetric region. In some applications, closure may not be required or may be implied, such as modeling terrain. The software is expected to use this surface to partition 3-dimensional space into an interior and exterior. A triangle mesh is a subtype of polyhedron in which all faces must be triangles, the only polygon that will always be planar, including the Triangulated irregular network (TIN) commonly used in GIS. A parametric mesh represents a three-dimensional surface by a connected set of parametric functions, similar to a spline or Bézier curve in two dimensions. The most common structure is the Non-uniform rational B-spline (NURBS), supported by most CAD and animation software. == Application in GIS == A wide variety of vector data structures and formats have been developed during the history of Geographic information systems, but they share a fundamental basis of storing a core set of geometric primitives to represent the location and extent of geographic phenomena. Locations of points are almost always measured within a standard Earth-based coordinate system, whether the spherical Geographic coordinate system (latitude/longitude), or a planar coordinate system, such as the Universal Transverse Mercator. They also share the need to store a set of attributes of each geographic feature alongside its shape; traditionally, this has been accomplished using the data models, data formats, and even software of relational databases. Early vector formats, such as POLYVRT, the ARC/INFO Coverage, and the Esri shapefile support a basic set of geometric primitives: points, polylines, and polygons, only in two dimensional space and the latter two with only straight line interpolation. TIN data structures for representing terrain surfaces as triangle meshes were also added. Since the mid 1990s, new formats have been developed that extend the range of available primitives, generally standardized by the Open Geospatial Consortium's Simple Features specification. Common geometric primitive extensions include: three-dimensional coordinates for points, lines, and polygons; a fourth "dimension" to represent a measured attribute or time; curved segments in lines and polygons; text annotation as a form of geometry; and polygon meshes for three-dimensional objects. Frequently, a representation of the shape of a real-world phenomenon may have a different (usually lower) dimension than the phenomenon being represented. For example, a city (a two-dimensional region) may be represented as a point, or a road (a three-dimensional volume of material) may be represented as a line. This dimensional generalization correlates with tendencies in spatial cognition. For example, asking the distance between two cities presumes a conceptual model of the cities as points, while giving directions involving travel "up," "down," or "along" a road imply a one-dimensional conceptual model. This is frequently done for purposes of data efficiency, visual simplicity, or cognitive efficiency, and is acceptable if the distinction between the representation and the represented is understood, but can cause confusion if information users assume that the digital shape is a perfect representation of reality (i.e., believing that roads really are lines). == In 3D modelling == In CAD software or 3D modelling, the interface may present the user with the ability to create primitives which may be further modified by edits. For example, in the practice of box modelling the user will start with a cuboid, then use extrusion and other operations to create the model. In this use the primitive is just a convenient starting point, rather than the fundamental unit of modelling. A 3D package may also include a list of extended primitives which are more complex shapes that come with the package. For example, a teapot is listed as a primitive in 3D Studio Max. == In graphics hardware == Various graphics accelerators exist with hardware acceleration for rendering specific primitives such as lines or triangles, frequently with texture mapping and shaders. Modern 3D accelerators typically accept sequences of triangles as triangle strips.

  Read more →
• 

  List of broadband over power line deployments

  This is a list of broadband over power line deployments. In this sense, "broadband" usually refers to Internet access using power line communication technology. == BPL pilot projects - 1st Gen (UPA) == === Inactive pilot projects === North America: United States: The United Telecom Council publishes the Federal Communications Commission (FCC)-mandated BPL Interference Resolution website, which provides a list of all BPL deployments in the US. Canada: Quebec: As of 2005, PLC communication technology developed by Ariane Controls is being installed inside and outside existing buildings to control lights and other energy-hungry devices. The cheap devices allow energy consumption to be better managed, and so save much energy and bring a clear return on investment. Western Europe: Sweden: Vattenfall is using PLC technology at 1200 baud for automatic meter reading based on an Iskraemeco product. Central and Eastern Europe, and Eurasia: Russian Federation: Electro-com has deployed widely BPL/PLC technology and offers internet access service in Moscow, Nizhny Novgorod, Ryazan, Kaluga and Rostov-on-Don, planning to extend coverage to main Russian cities. Currently the company does not provide other services, though plans to start providing telephone, and television services someday. Base equipment is a DefiDev modem with a DS2 chipset. The company had 35,000 subscribers and an annual growth of 15-20%. The company has, however, halted operations in Moscow in September, 2008, having sold its client network to an IDSL internet provider. Romania: In January, 2006, the Ministry of Communications and Information Technology introduced a PLC trial in the rural locality of Band, Mureș County, offering phone and broadband internet access for €7 per month. The technology was introduced to 50 households. Montenegro: In March, 2002, the Internet Crna Gora biggest internet provider in Montenegro launched a pilot project in town of Cetinje. Serbia: In August 2002, the Star Engineering from Niš launched a pilot project to show a completely new way to access the Internet, which is a new in that time in most countries around the world. Hungary: The first powerline service in Hungary was realized in September, 2003, in the Riverside apartment house in Budapest by 23Vnet Ltd. The PLC equipment was supplied by ASCOM Powerline. After four months the service was counting 100 users from 450 apartment owners. The bandwidth is 4.5 Mbit/s. Asia, Pacific, and Oceania: Indonesia: PT Kejora Gemilang Internusa "KEJORA", under their banner PLANET BROADBAND, is currently rolling out broadband over power line, with over 300,000 homes expected to be enabled by August 2010. PT. Kejora Gemilang Internusa signed an 8-year Joint Venture concession agreement with ICON+ a division of PT. Perusahaan Listrik Negara (Indonesia electricity company). Under the terms of the agreement PLAnet Broadband are to supply BPL/PLC to Jakarta West and West Java. Another company, PT. Broadband Powerline Indonesia, has been developing broadband over power line in apartment buildings since 2006. PT. BPI also produces data couplers to make broadband over powerline possible in three phases (R, S, T) with a single master. India : In India IIIT Allahabad has completed a project in co-operation with Corinex Communications Canada to implement a prototype of BPL for University campus and nearby villages. Africa and the Middle East: Egypt: The Engineering Office for Integrated Projects (EOIP) has deployed PLC technology widely in Alexandria, Fayed, and Tanta. Based on a locally developed system, the company provides AMR for electricity utilities. Currently, the company has about 70,000 subscribers. South Africa: Goal Technology Solutions (GTS) trialled the technology and is offering service in the suburbs of Pretoria, and plans to extend it to other areas. The tests were done with Mitsubishi equipment using a DS2 chipset, and the company claims a maximum throughput of 90 Mbit/s although initially only "512 Kbits/s ADSL equivalent speeds" are available. Now it uses DefiDev's equipment, and according to GTS's website, it will expand available bandwidth up to 5-20 Mbit/s. Ghana: Cactel Communications, Ltd. successfully deployed an MV solution pilot project in the Graphic Communications Group in Accra in June, 2005. A Cactel Remote Energy Management System (REMS) pilot project for the Electricity Company of Ghana (ECG) is running a 40-user pilot project at the University of Ghana in Legon. The current project combines fiber, radio link, Wi-Fi and PLC to provide broadband internet access and telephony. It showcases the interoperability of PLC technology and the company's expertise in emerging market design and deployment. Cactel hopes to deploy nationally, and is in deliberations with the national stakeholders and with Ghana's Ministry of Communications (MoC). AllTerra Communications successfully implemented a pilot test of broadband over power lines in Akosombo. In partnership with VRA, this test involves demonstrating transmission of broadband from medium to low voltage signals. AllTerra is working with VRA to expand the pilot project to include essential grid management utilities that will help balance and manage the current electricity transmission throughout their various substations. Using IT as a catalyst for economic development, AllTerra is expanding into numerous areas throughout Ghana. Vobiss Solutions Ltd successfully implemented a Hybrid Fibre BPL pilot network within EMEFS Hillview Estate in collaboration with ECG. Saudi Arabia: ElectroNet has been working with the Saudi Electric Company since 2005 on a pilot project using broadband over power lines over medium voltage cables and linking into low voltage distribution within a shopping mall. The pilot project also integrates automatic meter readers. Powerlines Communications Co. Ltd. implemented an AMR pilot project for Saudi Electricity Company in 2006. The project was located in the city of Jeddah on the west coast of Saudi Arabia. Digital KWh meters were installed in parallel with analog KWh meters. Readings taken by the Saudi Electricity Company showed variations of less than 1%. A BPL pilot project was included. Saudi Arabian Computer Management Consultants (SACMAC) has signed a deal to become an official system integrator and distributor for Mitsubishi PLC. It is expected to become a great success, because the existing broadband service, monopolized by the Saudi Telecom Company, is expensive and has poor customer service (some clients report that company techs arrive months after ordering). SACMAC has declined to talk about specifics of availability and price but says it will start rolling out the service in a few months (as of May 2006) and its price will be lower than current broadband providers. === Concluded pilot projects === The following pilot projects have ended: Australia, Tasmania: In November 2007, electricity retailer Aurora Energy ended its involvement with BPL and announced it was switching to Optical Fiber. This ended their commercial trial begun in September 2005, offering BPL services to 500 homes in the suburb of Tolmans Hill near Hobart, which had followed a successful technological trial earlier that year. Portugal ended BPL/PLC deployments in the country in October 2006, reportedly for economic reasons., Russian Federation: In September 2008, Russia's only BPL provider Electro-com ended deployments in Moscow for economic reasons. Spain: In May 2007 Iberdrola and Endesa (the main power companies in Spain) ended their projects to deploy PLC. United States: As of July 2010, the City of Manassas, VA has shut down their BPL deployment, which was the largest in the country. As of April 2007, Motorola has shuttered its Powerline LV Access BPL and reportedly plans to re-purpose the technology to a new system called Powerline MU, which is for use within multiple-unit dwellings. Motorola's system uses only residential-side low-voltage power lines for transmission to reduce the antenna effect, and successfully demonstrated frequency-notching for reduced potential for interference over the Amperion Inc. and Current Technologies LLC systems. Motorola invited the American Radio Relay League to participate with these tests, and even installed the Motorola system at their headquarters. Preliminary results were very positive with regard to interference, because the Motorola system does not use BPL on the powerlines leading up to the neighborhood. The BPL carrier is only used for the last leg of the trip from the pole to the house, and gets the signal to the pole via radio. This limits the interference to the area surrounding the last leg to the house. === Dismantled pilot projects === The following other BPL trials in the US are dismantled as of May 2008:

  Read more →
• 

  Cryptovirology

  Cryptovirology refers to the study of cryptography use in malware, such as ransomware and asymmetric backdoors. Traditionally, cryptography and its applications are defensive in nature, and provide privacy, authentication, and security to users. Cryptovirology employs a twist on cryptography, showing that it can also be used offensively. It can be used to mount extortion based attacks that cause loss of access to information, loss of confidentiality, and information leakage, tasks which cryptography typically prevents. The field was born with the observation that public-key cryptography can be used to break the symmetry between what an antivirus analyst sees regarding malware and what the attacker sees. The antivirus analyst sees a public key contained in the malware, whereas the attacker sees the public key contained in the malware as well as the corresponding private key (outside the malware) since the attacker created the key pair for the attack. The public key allows the malware to perform trapdoor one-way operations on the victim's computer that only the attacker can undo. == Overview == The field encompasses covert malware attacks in which the attacker securely steals private information such as symmetric keys, private keys, PRNG state, and the victim's data. Examples of such covert attacks are asymmetric backdoors. An asymmetric backdoor is a backdoor (e.g., in a cryptosystem) that can be used only by the attacker, even after it is found. This contrasts with the traditional backdoor that is symmetric, i.e., anyone that finds it can use it. Kleptography, a subfield of cryptovirology, is the study of asymmetric backdoors in key generation algorithms, digital signature algorithms, key exchanges, pseudorandom number generators, encryption algorithms, and other cryptographic algorithms. The NIST Dual EC DRBG random bit generator has an asymmetric backdoor in it. The EC-DRBG algorithm utilizes the discrete-log kleptogram from kleptography, which by definition makes the EC-DRBG a cryptotrojan. Like ransomware, the EC-DRBG cryptotrojan contains and uses the attacker's public key to attack the host system. The cryptographer Ari Juels indicated that NSA effectively orchestrated a kleptographic attack on users of the Dual EC DRBG pseudorandom number generation algorithm and that, although security professionals and developers have been testing and implementing kleptographic attacks since 1996, "you would be hard-pressed to find one in actual use until now." Due to public outcry about this cryptovirology attack, NIST rescinded the EC-DRBG algorithm from the NIST SP 800-90 standard. Covert information leakage attacks carried out by cryptoviruses, cryptotrojans, and cryptoworms that, by definition, contain and use the public key of the attacker is a major theme in cryptovirology. In "deniable password snatching," a cryptovirus installs a cryptotrojan that asymmetrically encrypts host data and covertly broadcasts it. This makes it available to everyone, noticeable by no one (except the attacker), and only decipherable by the attacker. An attacker caught installing the cryptotrojan claims to be a virus victim. An attacker observed receiving the covert asymmetric broadcast is one of the thousands, if not millions of receivers, and exhibits no identifying information whatsoever. The cryptovirology attack achieves "end-to-end deniability." It is a covert asymmetric broadcast of the victim's data. Cryptovirology also encompasses the use of private information retrieval (PIR) to allow cryptoviruses to search for and steal host data without revealing the data searched for even when the cryptotrojan is under constant surveillance. By definition, such a cryptovirus carries within its own coding sequence the query of the attacker and the necessary PIR logic to apply the query to host systems. == History == The first cryptovirology attack and discussion of the concept was by Adam L. Young and Moti Yung, at the time called "cryptoviral extortion" and it was presented at the 1996 IEEE Security & Privacy conference. In this attack, a cryptovirus, cryptoworm, or cryptotrojan contains the public key of the attacker and hybrid encrypts the victim's files. The malware prompts the user to send the asymmetric ciphertext to the attacker who will decipher it and return the symmetric decryption key it contains for a fee. The victim needs the symmetric key to decrypt the encrypted files if there is no way to recover the original files (e.g., from backups). The 1996 IEEE paper predicted that cryptoviral extortion attackers would one day demand e-money, long before Bitcoin even existed. Many years later, the media relabeled cryptoviral extortion as ransomware. In 2016, cryptovirology attacks on healthcare providers reached epidemic levels, prompting the U.S. Department of Health and Human Services to issue a Fact Sheet on Ransomware and HIPAA. The fact sheet states that when electronic protected health information is encrypted by ransomware, a breach has occurred, and the attack therefore constitutes a disclosure that is not permitted under HIPAA, the rationale being that an adversary has taken control of the information. Sensitive data might never leave the victim organization, but the break-in may have allowed data to be sent out undetected. California enacted a law that defines the introduction of ransomware into a computer system with the intent of extortion as being against the law. == Examples == === Tremor virus === While viruses in the wild have used cryptography in the past, the only purpose of such usage of cryptography was to avoid detection by antivirus software. For example, the tremor virus used polymorphism as a defensive technique in an attempt to avoid detection by anti-virus software. Though cryptography does assist in such cases to enhance the longevity of a virus, the capabilities of cryptography are not used in the payload. The One-half virus was amongst the first viruses known to have encrypted affected files. === Tro_Ransom.A virus === An example of a virus that informs the owner of the infected machine to pay a ransom is the virus nicknamed Tro_Ransom.A. This virus asks the owner of the infected machine to send $10.99 to a given account through Western Union. Virus.Win32.Gpcode.ag is a classic cryptovirus. This virus partially uses a version of 660-bit RSA and encrypts files with many different extensions. It instructs the owner of the machine to email a given mail ID if the owner desires the decryptor. If contacted by email, the user will be asked to pay a certain amount as ransom in return for the decryptor. === CAPI === It has been demonstrated that using just 8 different calls to Microsoft's Cryptographic API (CAPI), a cryptovirus can satisfy all its encryption needs. == Other uses of cryptography-enabled malware == Apart from cryptoviral extortion, there are other potential uses of cryptoviruses, such as deniable password snatching, cryptocounters, private information retrieval, and in secure communication between different instances of a distributed cryptovirus.

  Read more →
• 

  Media contacts database

  In public relations (PR) and marketing, a media contacts database is a resource which catalogs the names, contact information, and other details about people who work in various media professions. These include journalists, reporters, editors, publishers, contributors, freelance journalists, opinion writers, social media personalities/ influencers, TV show anchors, radio show hosts, DJs, and others. A media contacts database usually contains the following information: Full name of the media contact, The publication or channel they work for Designations (past and present) Topics they cover, or their beat Contact information found in public domains Online presence like blogs and other social networking sites Education Information == Overview == A media contacts database is a public relations tool that is maintained and used by PR professionals to pitch stories on a particular topic, product, or company to a specific group of journalists. These journalists would then write or speak about the particular topic in a relevant issue or episode of their shows. A media contacts database allows a PR professional to gain easy access to hundreds of journalists within a short span of time. Media contacts database are created and sold by many media research companies that offer such PR software for professionals.

  Read more →
• 

  Amazon Elastic Compute Cloud

  Amazon Elastic Compute Cloud (EC2) is a part of Amazon's cloud-computing platform, Amazon Web Services (AWS), that allows users to rent virtual computers on which to run their own computer applications. EC2 encourages scalable deployment of applications by providing a web service through which a user can boot an Amazon Machine Image (AMI) to configure a virtual machine, which Amazon calls an "instance", containing any software desired. A user can create, launch, and terminate server-instances as needed, paying by the second for active servers – hence the term "elastic". EC2 provides users with control over the geographical location of instances that allows for latency optimization and high levels of redundancy. In November 2010, Amazon switched its own retail website platform to EC2 and AWS. == History == Amazon announced a limited public beta test of EC2 on August 25, 2006, offering access on a first-come, first-served basis. Amazon added two new instance types (Large and Extra-Large) on October 16, 2007. On May 29, 2008, two more types were added, High-CPU Medium and High-CPU Extra Large. There were twelve types of instances available. Amazon added three new features on March 27, 2008: static IP addresses, availability zones, and user-selectable kernels. On August 20, 2008, Amazon added Elastic Block Store (EBS). This provides persistent storage, a feature that had been lacking since the service was introduced. Amazon EC2 went into full production when it dropped the beta label on October 23, 2008. On the same day, Amazon announced the following features: a service level agreement for EC2, Microsoft Windows in beta form on EC2, Microsoft SQL Server in beta form on EC2, plans for an AWS management console, and plans for load balancing, autoscaling, and cloud monitoring services. These features were subsequently added on May 18, 2009. Amazon EC2 was developed mostly by a team in Cape Town, South Africa led by Chris Pinkham. Pinkham provided the initial architecture guidance for EC2 and then built the team and led the development of the project along with Willem van Biljon. == Instance types == Initially, EC2 used Xen virtualization exclusively. However, on November 6, 2017, Amazon announced the new C5 family of instances that were based on a custom architecture around the KVM hypervisor, called Nitro. Each virtual machine, called an "instance", functions as a virtual private server. Amazon sizes instances based on "Elastic Compute Units". The performance of otherwise identical virtual machines may vary. On November 28, 2017, AWS announced a bare-metal instance, a departure from exclusively offering virtualized instance types. As of January 2019, the following instance types were offered: General Purpose: A1, T3, T2, M5, M5a, M4, T3a Compute Optimized: C5, C5n, C4 Memory Optimized: R5, R5a, R4, X1e, X1, High Memory, z1d Accelerated Computing: P3, P2, G3, F1 Storage Optimized: H1, I3, D2 As of April 2018, the following payment methods by instance were offered: On-demand: pay by the hour without commitment. Reserved: rent instances with one-time payment receiving discounts on the hourly charge. Spot: bid-based service: runs the jobs only if the spot price is below the bid specified by bidder. The spot price is claimed to be supply-demand based, however a 2011 study concluded that the price was generally not set to clear the market, but was dominated by an undisclosed reserve price. In 2025, AWS expanded EC2 with the compute-optimized C8gn family, powered by Graviton4 and offering up to 600 Gbit/s network bandwidth (about 30% higher compute performance than C7gn), and introduced G6f fractional-GPU instances that let customers provision one-eighth, one-quarter, or one-half of an NVIDIA L4 GPU for right-sized graphics/ML workloads. === Cost === As of April 2018, Amazon charged about $0.0058 per hour ($4.176 per month) for the smallest "Nano Instance" (t2.nano) virtual machine running Linux or Windows. Storage-optimized instances cost as much as $4.992 per hour (i3.16xlarge). "Reserved" instances can go as low as $2.50 per month for a three-year prepaid plan. The data transfer charge ranges from free to $0.12 per gigabyte, depending on the direction and monthly volume (inbound data transfer is free on all AWS services). EC2 costs can be analyzed using the Amazon Cost and Usage Report. There are many different cost categories for EC2 including: hourly Instance Charges, Data Transfer, EBS Volumes, EBS Volume Snapshots, and Nat Gateway. === Free tier === As of December 2010 Amazon offered a bundle of free resource credits to new account holders. The credits are designed to run a "micro" sized server, storage (EBS), and bandwidth for one year. Unused credits cannot be carried over from one month to the next. === Reserved instances === Reserved instances enable EC2 or RDS service users to reserve an instance for one or three years. The corresponding hourly rate charged by Amazon to operate the instance is 35 to 75% lower than the rate charged for on-demand instances. Reserved instances can be purchased with three different payment options: All Upfront, Partial Upfront and No Upfront. The different purchase options allow for different structuring of payment models, with a larger discount given to customers that pay their reservation upfront. Reserved Instances are purchased based on a resource commitment. These reservations are made based on an instance type and a count of that instance type. For example, you could reserve 100 i3.large instances for a 3-year term. In September 2016, AWS announced several enhancements to Reserved instances, introducing a new feature called scope and a new reservation type called a Convertible. In October 2017, AWS announced the allowance to subdivide the instances purchased for more flexibility. === Spot instances === Cloud providers maintain large amounts of excess capacity they have to sell or risk incurring losses. Amazon EC2 Spot instances are spare compute capacity in the AWS cloud available at up to 90% discount compared to On-Demand prices. As a trade-off, AWS offers no SLA on these instances and customers take the risk that it can be interrupted with only two minutes of notification when Amazon needs the capacity back. Researchers from the Israeli Institute of Technology found that "they (Spot instances) are typically generated at random from within a tight price interval via a dynamic hidden reserve price". Some companies, like Spotinst, are using machine learning to predict spot interruptions up to 15 minutes in advance. === Savings Plans === In November 2019, Amazon announced Savings Plans. Savings Plans are an alternative to Reserved Instances that come in two different plan types: Compute Savings Plans and EC2 Instances Savings Plans. Compute Savings Plans allow an organization to commit to EC2 and Fargate usage with the freedom to change region, family, size, availability zone, OS and tenancy inside the lifespan of the commitment. EC2 Instance Savings plans provide a larger discount than Compute Savings Plans but are less flexible meaning a user must commit to individual instance families within a region to take advantage, but with the freedom to change instances within the family in that region. AWS uses the Cost Explorer to automatically calculate recommendations for the commitments you should make how that commitment will look like as a monthly charge on your AWS bill. AWS Savings Plans are purchased based on hourly spend commitment. This hourly commitment is made using the discounted pricing of the savings plan you are purchasing. For example, you could commit to spending $5 per hour, on a Compute Savings Plan, for a 3-year term. == Features == === Operating systems === When it launched in August 2006, the EC2 service offered Linux and later Sun Microsystems' OpenSolaris and Solaris Express Community Edition. In October 2008, EC2 added the Windows Server 2003 and Windows Server 2008 operating systems to the list of available operating systems. In March 2011, NetBSD AMIs became available. In November 2012, Windows Server 2012 support was added. Since 2006, Colin Percival, a FreeBSD developer and Security Officer, solicited Amazon to add FreeBSD. In November 2012, Amazon officially supported running FreeBSD in EC2. The FreeBSD/EC2 platform is maintained by Percival who also developed the secure deduplicating Amazon S3-cloud based backup service Tarsnap. Amazon has their own Linux distribution based on Fedora and Red Hat Enterprise Linux as a low cost offering known as the Amazon Linux AMI. Version 2013.03 included: Linux kernel, Java OpenJDK Runtime Environment and GNU Compiler Collection. On November 30, 2020, Amazon announced that it would be adding macOS to the EC2 service. Initial support was announced for macOS Mojave and macOS Catalina running on Mac Mini. === Managed Container and Kubernetes Services === Amazon Elastic Container Registry (ECR) is a Docker registry service for Amazon EC2

  Read more →
• 

  ESign (India)

  Aadhaar eSign is an online electronic signature service in India to facilitate an Aadhaar holder to digitally sign a document. The signature service is facilitated by authenticating the Aadhaar holder via the Aadhaar-based e-KYC (electronic Know Your Customer) service. To eSign a document, one has to have an Aadhaar card and a mobile number registered with Aadhaar. With these two things, an Indian citizen can sign a document remotely without being physically present. == Procedure == The notification issued by Government of India in this regard stipulates the following procedure for the e-authentication using Aadhaar e-KYC services. Authentication of an electronic record by e-authentication technique, which shall be done by the applicable use of e-authentication, hash function, and asymmetric cryptosystem techniques, leading to issuance of digital signature certificate by Certifying Authority, a trusted third party service by subscriber's key pair generation, storing of the key pairs on hardware security module and creation of digital signature provided that the trusted third party shall be offered by the certifying authority (the trusted third party shall send application form and certificate signing request to the Certifying Authority for issuing a digital signature certificate to the subscriber), issuance of digital signature certificate by Certifying Authority shall be based on e-authentication, particulars given in the prescribed format, digitally signed verified information from Aadhaar e-KYC services and electronic consent of digital signature certificate applicant, the manner and requirements for e-authentication shall be as issued by the Controller from time to time, the security procedure for creating the subscriber's key pair shall be in accordance with the e-authentication guidelines issued by the Controller, the standards referred to in rule 6 of the Information Technology (Certifying Authorities) Rules, 2000 shall be complied with, in so far as they relate to the certification function of public key of Digital Signature Certificate applicant, and the manner in which information is authenticated by means of digital signature shall comply with the standards specified in rule 6 of the Information Technology (Certifying Authorities) Rules, 2000 in so far as they relate to the creation, storage and transmission of Digital Signature. == eSign Service Providers == Organisations and individuals seeking to obtain the eSigning Service can utilize the services of various service providers. There are empanelled service providers with whom organisations can register as an Application Service Prover after submitting the requisite documents, getting UAT access, building the application around the service and going through an IT Audit by an CERT-IN empanelled auditor. However, the process of registering as an Application Service Provider is cumbersome, and requires huge investments of time, money and resources in complying with the regulations and building a suitable application. Most organisations prefer using services of plug-n-play gateway providers who take the responsibility of complying with the regulations, hence simplifying the process for the market.

  Read more →
• 

  Short Weather Cipher

  The Short Weather Cipher (German: Wetterkurzschlüssel, abbreviated WKS), also known as the weather short signal book, was a cipher, presented as a codebook, that was used by the radio telegraphists aboard U-boats of the German Navy (Kriegsmarine) during World War II. It was used to condense weather reports into a short 7-letter message, which was enciphered by using the naval Enigma and transmitted by radiomen to intercept stations on shore, where it was deciphered by Enigma and the 7-letter weather report was reconstructed. == History == During World War II, during various times, different versions of the cipher were in operation. The first issue carried the codename Weimar. It was replaced by the edition Eisenach on 20 January 1942. On 10 March 1943, the third edition of the weather key, bearing the codename Naumburg, entered into force. On May 9, 1941, during Operation Primrose, the operation to occupy Åndalsnes and create a diversion south of Trondheim in Norway as part of the Norwegian Campaign, an intact Naval Enigma (M3) cipher machine, a copy of the "Weimar" version of the short weather cipher and a copy of the short signal book (German: Kurzsignalbuch or Kurzsignale for short) was recovered from the submarine U-110, that was captured in the North Atlantic east of Cape Farewell, Greenland. This enabled the cryptanalysts in Bletchley Park to break the encryption of the M3 and to decipher the German submarine radio messages. The Short Weather Cipher was critical in the cryptanalysis of the Naval Enigma M4 and yielded excellent cribs. On 30 October 1942, a copy of the Wetterkurzschlüssel, the short weather cipher, and of the short signal book, the Kurzsignale, were recovered as part of a daring raid on the U-boat U-559, when three Royal Navy sailors, Lieutenant Anthony Fasson, Able Seaman Colin Grazier and NAAFI canteen assistant Tommy Brown, then boarded the abandoned submarine, and recovered the documents after a 90-minute search. They reached the Government Code and Cypher at Bletchley Park after a three-week delay, on 24 November 1942. The documents which cost the lives of Fasson and Grazier proved to be particularly important in breaking the Naval Enigma M4. The version of the short weather cipher recovered was the Eisenach version. Unlike the first version Weimar, the Eisenach did not list the 26 rotor positions that were indicated by a letter, to be used in enciphering weather reports. Thus, Hut 8 cryptanalysts thought that all four rotors were used to encipher weather reports. Testing on the Bombes began to surface weather kisses (identical messages in two cryptosystems). On 13 December 1942, a crib obtained using the Short Weather Cipher gave a key with the Naval Enigma M4 rotatable Umkehrwalze (reversing roller or reflector) in the neutral position, making it equivalent to a standard Enigma and thus making B-Dienst messages potentially breakable on existing bombes. Hut 8 learned that the 4-letter indicators for regular U-boat messages were the same as 3-letter indicators for weather messages the same day, except for one extra letter. This meant that once the key was found for a weather message on any day, the fourth rotor had to be only tested in 26 positions to find the full 4-letter key. By the end of the day on Sunday 13 December, Rodger Winn of the Submarine Tracking Room at Bletchley Park knew that Shark Enigma Cipher was broken. When the third edition of the short signal book was introduced on 10 March 1943, Hut 8 was immediately deprived of cribs. However, by the 19 March, cribs were again being used by Hut 8 personnel, using the method of employing short signal sighting reports. These were reports made by U-boats when contact was made with Kurzsignalheft code book. Hut 8 managed to solve Shark for 90 out of 112 days before the end of June. Kurzsignalheft short sighting reports also used M4 in M3 mode. By the end of June, four-rotor bombes had entered service at Bletchley Park, and by August had been introduced by the US Navy. From September onwards, Shark was generally solved within 24 hours. == Operation == The U-boat encoded weather reports using the Short Weather Cipher, before being enciphered on the Naval Enigma. The shore patrol of the Kriegsmarine, deciphered the message and decoded it, then forwarding it to a central meteorological station, which rebroadcast the data as ship synoptics, after enciphering it with additive tables using a cipher, which was called Germet 3 by Hut 8 personnel. The short weather cipher coded weather reports using a polyphonic single-letter code with X missing. A = +28° ◦ B = +27° ◦ C = +26° ◦ D = +25° ◦ . . . ◦ W = +6° ◦ Y= +5° ◦ Z = +4° ◦ A = +3° ◦ B = +2° ◦ C = +1° ◦ D = 0° ◦ E =−1° ◦ F =−2° ◦ . . . ◦ Z = −21° ◦ In a similar way, water temperature, atmospheric pressure, humidity, wind direction, wind velocity, visibility, degree of cloudiness, geographic latitude, and geographic longitude had to be coded in a prescribed order with the weather report consisted of a single short word. Based on the approximate knowledge of the position of the submarine, the Kriegsmarine telegraphist who received the message could translate the letter "S", according to the above table, which could mean 10 °C or −15 °C, back to the correct temperature. Similarly, the direction and the type of swell was also coded with only a single letter: ----------------------------------------------------- Direction from which | Type of swell the swell comes | low | middle high | high | ----------------------------------------------------- N | a | i | q | NE | b | j | r | E | c | k | s | SE | d | l | t | S | e | m | u | SW | f | n | v | W | g | o | w | NW | h | p | x | No swelling | | | | y Intermittent | | | | z As an example of the cipher, a weather report for 68° North latitude, 20° West longitude (north of Iceland) with atmospheric pressure 972 millibars, temperature minus 5 °C, wind northwest Force 6 (on the Beaufort scale), 3/10 cirrus cloud cover, visibility 5 nautical miles, would be coded as MZNFPED. == Publications == Bauer, Arthur O. (1997), Funkpeilung als alliierte Waffe gegen deutsche U-Boote 1939–1945 [Direction finding as Allied weapon against German submarines from 1939 to 1945] (in German), Diemen, NL: Selbstverlag, ISBN 978-3-00-002142-8 Bauer, Friedrich L. (2007), Decrypted Secrets. Methods and Maxims of Cryptology (4., rev. and extended ed.), Berlin Heidelberg New York: Springer, ISBN 978-3-540-24502-5 Pfeiffer, Paul N. (October 1998), "Breaking the German Weather Ciphers in the Mediterranean Detachment, 849th Signal Intelligence Service", Cryptologia, 22 (4): 354–369, doi:10.1080/0161-119891886975, ISSN 0161-1194 Ulbricht, Heinz (2005), Die Chiffriermaschine Enigma – Trügerische Sicherheit. Ein Beitrag zur Geschichte der Nachrichtendienste [The Enigma cipher machine – Deceptive security. A contribution to the history of the intelligence services], Dissertation, Fachbereich Mathematik und Informatik, Technische Universität Braunschweig (in German)

  Read more →
• 

  Multistage interconnection networks

  Multistage interconnection networks (MINs) are a class of high-speed computer networks usually composed of processing elements (PEs) on one end of the network and memory elements (MEs) on the other end, connected by switching elements (SEs). The switching elements themselves are usually connected to each other in stages, hence the name. MINs are typically used in high-performance or parallel computing as a low-latency interconnection (as opposed to traditional packet switching networks), though they could be implemented on top of a packet switching network. Though the network is typically used for routing purposes, it could also be used as a co-processor to the actual processors for such uses as sorting; cyclic shifting, as in a perfect shuffle network; and bitonic sorting. == Background == Interconnection network are used to connect nodes, where nodes can be a single processor or group of processors, to other nodes. Interconnection networks can be categorized on the basis of their topology. Topology is the pattern in which one node is connected to other nodes. There are two main types of topology: static and dynamic. Static interconnect networks are hard-wired and cannot change their configurations. A regular static interconnect is mainly used in small networks made up of loosely couple nodes. The regular structure signifies that the nodes are arranged in specific shape and the shape is maintained throughout the networks. Some examples of static regular interconnections are: Completely connected network In a mesh network, multiple nodes are connected with each other. Each node in the network is connected to every other node in the network. This arrangement allows proper communication of the data between the nodes. But, there are a lot of communication overheads due to the increased number of node connections. Shared busThis network topology involves connection of the nodes with each other over a bus. Every node communicates with every other node using the bus. The bus utility ensures that no data is sent to the wrong node. But, the bus traffic is an important parameter which can affect the system. RingThis is one of the simplest ways of connecting nodes with each other. The nodes are connected with each other to form a ring. For a node to communicate with some other node, it has to send the messages to its neighbor. Therefore, the data message passes through a series of other nodes before reaching the destination. This involves increased latency in the system. TreeThis topology involves connection of the nodes to form a tree. The nodes are connected to form clusters and the clusters are in-turn connected to form the tree. This methodology causes increased complexity in the network. Hypercube This topology consists of connections of the nodes to form cubes. The nodes are also connected to the nodes on the other cubes. ButterflyThis is one of the most complex connections of the nodes. As the figure suggests, there are nodes which are connected and arranged in terms of their ranks. They are arranged in the form of a matrix. In dynamic interconnect networks, the nodes are interconnected via an array of simple switching elements. This interconnection can then be changed by use of routing algorithms, such that the path from one node to other nodes can be varied. Dynamic interconnections can be classified as: Single stage Interconnect Network Multistage interconnect Network Crossbar switch connections == Crossbar Switch Connections == In crossbar switch, there is a dedicated path from one processor to other processors. Thus, if there are n inputs and m outputs, we will need nm switches to realize a crossbar. As the number of outputs increases, the number of switches increases by factor of n. For large network this will be a problem. An alternative to this scheme is staged switching. == Single Stage Interconnect Network == In a single stage interconnect network, the input nodes are connected to output via a single stage of switches. The figure shows 88 single stage switch using shuffle exchange. As one can see, from a single shuffle, not all input can reach all output. Multiple shuffles are required for all inputs to be connected to all the outputs. == Multistage Interconnect Network == A multistage interconnect network is formed by cascading multiple single stage switches. The switches can then use their own routing algorithm, or be controlled by a centralized router, to form a completely interconnected network. Multistage Interconnect Network can be classified into three types: Non-blocking: A non-blocking network can connect any idle input to any idle output, regardless of the connections already established across the network. Crossbar is an example of this type of network. Rearrangeable non-blocking: This type of network can establish all possible connections between inputs and outputs by rearranging its existing connections. Blocking: This type of network cannot realize all possible connections between inputs and outputs. This is because a connection between one free input to another free output is blocked by an existing connection in the network. The number of switching elements required to realize a non-blocking network in highest, followed by rearrangeable non-blocking. Blocking network uses least switching elements. == Examples == Multiple types of multistage interconnection networks exist. === Omega network === An Omega network consists of multiple stages of 22 switching elements. Each input has a dedicated connection to an output. An NN omega network has log2(N) stages and N/2 switching elements in each stage for a perfect shuffle between stages. Thus the network has complexity of 0(N log(N)). Each switching element can employ its own switching algorithm. Consider an 88 omega network. There are 8! = 40320 1-to-1 mappings from input to output. There are 12 switching element for a total permutation of 2^12 = 4096. Thus, it is a blocking network. === Clos network === A Clos network uses 3 stages to switch from N inputs to N outputs. In the first stage, there are r= N/n crossbar switches and each switch is of size nm. In the second stage there are m switches of size rr and finally the last stage is a mirror of the first stage with r switches of size mn. A clos network will be completely non-blocking if m >= 2n-1. The number of connections, though more than omega network is much less than that of a crossbar network. === Beneš network === A Beneš network is a rearrangeably non-blocking network derived from the clos network by initializing n = m = 2. There are (2log2(N) - 1) stages, with each stage containing N/2 22 crossbar switches. An 88 Beneš network has 5 stages of switching elements, and each stage has 4 switching elements. The center three stages has two 44 benes network. The 44 Beneš network, can connect any input to any output recursively.

  Read more →
• 

  List of C software and tools

  This is a list of software and programming tools for the C programming language, including libraries, debuggers, compilers, integrated development environments (IDEs), and other related development tools and utilities. == Libraries and tools == Adns — asynchronous DNS resolver library Advanced Linux Sound Architecture — API for sound card device drivers Allegro — cross-platform software library for video game development Apache Portable Runtime — Apache web server tool set of APIs that map to the underlying operating system Argon2 — memory-hard password hashing library Berkeley DB — embedded database software library for key/value data Binary File Descriptor library — binary file manipulation library in the GNU toolchain Boehm garbage collector – conservative garbage collector Borland Graphics Interface — graphics library for Borland compilers BSAFE — FIPS 140-2 validated cryptography library Chipmunk — 2D real-time rigid body physics engine C POSIX library — specification of a C standard library for POSIX systems C standard library – standard library for the C programming language Cairo – vector graphics library API for software developers CFD General Notation System (CGNS) — data format and library for computational fluid dynamics cJSON — lightweight JSON parser CLIPS — public-domain software tool for building expert systems Core Audio — low-level API for dealing with sound in Apple's macOS and iOS operating systems Core Foundation — API for macOS and iOS and other Apple operating systems Core Image — GPU accelerated image processing technology for Apple operating systems with Quartz graphics rendering layer. Core Text — text layout and font rendering API for macOS and iOS. Cryptlib — portable cryptography library cURL / libcurl — CLI app for uploading and downloading individual files, such as a URL from a web server over HTTP. DevIL — cross-platform image library for loading and converting file formats DirectFB — graphics acceleration and input device handling library Dld — dynamic loading library Expat — stream-oriented XML 1.0 parser library, written in C99. FFmpeg — multimedia framework for audio/video processing Fontconfig — font customization and configuration library FreeTDS — database library for Sybase and Microsoft SQL Server FreeType — render text onto bitmaps with a font rasterization engine GD Graphics Library — image creation and manipulation library GDK — graphics abstraction layer for GTK GEGL — graph-based image processing framework GIO — I/O and virtual file system library in GLib GLib — utility library providing data structures, event loops, and portability functions. glibc — GNU implementation of the C standard library GLFW — library for OpenGL contexts, windows, and input device handling GNet — networking library for GLib GNU Libtool — Library management tool GNU portability library — collection of portability routines for GNU software GNU Portable Threads — POSIX/ANSI-C based user space thread library for UNIX for scheduling multithreading GNU Readline — command-line editing library GnuTLS — secure communications (TLS/SSL) library GObject — object system library for GNOME GTK — widget toolkit for creating graphical user interfaces GTK Scene Graph Kit (GSK) — scene graph and rendering toolkit for GTK HDF — file format and library for managing large datasets Integrated Performance Primitives — Intel library of optimized multimedia and data processing routines IUP — portable GUI toolkit J2K-Codec — JPEG 2000 image codec JasPer — reference implementation of the codec specified in the JPEG-2000 Part-1 standard LDAP API — API for interacting with Lightweight Directory Access Protocol LZO — lossless compression library Liba52 — decoder for A/52 (AC-3) audio streams libarchive — reading and writing various archive and compression formats Libart — 2D graphics library Libavcodec — codec library from FFmpeg Libavdevice — library for handling multimedia devices Libavfilter — audio and video filter library Libavformat — library for muxing and demuxing multimedia Libpcap — packet capture library Libdca — decoder for DTS audio Libdvdcss — access to encrypted DVD-Video discs libevent — asynchronous event notification callbacks libffi — foreign function interface libfuse — userspace filesystem Libgegl — programming interface to GEGL image processing libgcrypt — cryptography Libgimp — plug-in development library for GIMP Libhybris — compatibility layer for running Android libraries on Linux Libinput — input device library for Wayland and X.Org libjpeg — JPEG image library libLAS — reading and writing geospatial data encoded in the ASPRS laser (LAS) file format libmicrohttpd — small C library for embedding HTTP server functionality Libmpcodecs — media player codec library from MPlayer Libmpdemux — demultiplexing library from MPlayer libpng — PNG image format Libpostproc — video post-processing library from FFmpeg libpq — PostgreSQL client LibreSSL — fork of OpenSSL for TLS Librsb — parallel library for sparse matrix computations Librsvg — SVG rendering library libsndfile — reading and writing audio files libsodium — easy-to-use cryptography library Libswscale — image scaling and colorspace conversion library LibTIFF — TIFF image handling library Libusb — USB device access library Libuv — asynchronous I/O and event loop library LibVLC — media player engine from VLC LibVNCServer — implementation of the VNC server protocol Libvpx — VP8 and VP9 video codec library Libwww — early World Wide Web protocol library from W3C libxml2 — XML parsing Libxslt — XSLT library for the GNOME Project libzip — ZIP archives Lightning Memory-Mapped Database — fast key–value database engine LittleCMS — open-source color management system LZ4 — fast lossless compression algorithm LZFSE — compression library developed by Apple MatrixSSL — lightweight TLS implementation Mbed TLS — portable cryptography and TLS library MediaLib — Sun Microsystems library for multimedia processing Mesa — OpenGL and Vulkan graphics library Microwindows — small windowing system for embedded devices Ming — library for generating SWF (Flash) files Mongoose — embedded web server and networking library Mpg123 — MP3 audio decoding library MPIR — multiple-precision arithmetic library MsQuic — Microsoft implementation of the QUIC transport protocol MuJoCo — physics engine for robotics and control Mustache — logic-less templating library Ncurses — terminal control library Nettle — low-level cryptography library Newt — text-based user interface library Netpbm — graphics conversion and processing library Nghttp2 — implementation of the HTTP/2 protocol Oniguruma — regular expression library Open Asset Import Library — library to import/export 3D model formats OpenCL — parallel computing API/library OpenCV — computer vision OpenGL — API for rendering 2D and 3D vector graphics OpenGL Utility Library — OpenGL utility functions OpenJPEG — JPEG 2000 image codec OpenSSL — SSL and TLS protocols and cryptography library Pango — layout engine library which works with the HarfBuzz shaping engine for displaying multi-language text perf (Linux) — performance analyzing tool PCRE — regular expression library PROJ — library for map projections and coordinate transforms Quartz 2D — 2D graphics rendering API for macOS and iOS platforms, part of the Core Graphics framework. Raylib — simple library for games and multimedia Redland RDF Application Framework — RDF data storage library S2n-tls — TLS implementation from AWS Setcontext — context switching library functions SDL — Simple DirectMedia Layer systemd — system and service manager libraries for Linux Tk — GUI widgets for building graphical user interfaces VDPAU — video decoding acceleration API Vorbis — audio compression codec library VTD-XML — high-performance XML parser Wimlib — library for handling Windows Imaging Format disk images Windows.h — base Windows API header file WolfSSH — lightweight SSH library WolfSSL — lightweight SSL/TLS library X Toolkit Intrinsics — toolkit library for the X Window System x264 — H.264 video codec library XCB — C binding for the X Window System protocol Xft — font rendering library using FreeType Xlib — low-level X Window System API XMDF — eXtensible Model Data Format for scientific data XMLStarlet — XML command-line toolkit zlib — data compression Zopfli — data compression library that performs deflate, gzip and zlib data encoding. Zstd — fast data compression library == Integrated development environments == Anjuta — GNOME IDE CLion — cross-platform commercial IDE from JetBrains Code::Blocks — cross-platform open-source IDE CodeLite — open-source IDE Dev-C++ Eclipse CDT Geany — text editor with IDE features KDevelop — KDE IDE NetBeans Qt Creator SlickEdit Visual Studio Xcode === Online IDEs === CodeSandbox — online IDE primarily for web development with some C support via containers GitHub Codespaces — cloud-based online IDE developed by GitHub Google Cloud Shell — browser-based shell and editor that can comp

  Read more →
• 

  NYSERNet

  NYSERNet, Inc. (New York State Education and Research Network), is a non-profit Internet service provider in New York State. It mainly provides Internet access to universities, colleges, museums, health care facilities, primary and secondary schools, and research institutions. == History == NYSERNet was founded in 1986 in Troy, New York. Its founders compared NYSERNet's network with the Erie Canal and considered it the next step in two centuries to draw the country together. NYSERNet's network reaches from Buffalo to New York City. Completed in 1987, it was the first statewide regional IP network in the United States.[1] Initial speed of 56 kbps was upgraded to T1 in 1989 and T3 in 1994. It was the original assignee of AS174 according to RFC1117. This ASN is used today by Cogent Communications for their global network.

  Read more →
• 

  Data steward

  A data steward is an oversight or data governance role within an organization, and is responsible for ensuring the quality and fitness for purpose of the organization's data assets, including the metadata for those data assets. A data steward may share some responsibilities with a data custodian, such as the awareness, accessibility, release, appropriate use, security and management of data. A data steward would also participate in the development and implementation of data assets. A data steward may seek to improve the quality and fitness for purpose of other data assets their organization depends upon but is not responsible for. Data stewards have a specialist role that utilizes an organization's data governance processes, policies, guidelines and responsibilities for administering an organizations' entire data in compliance with policy and/or regulatory obligations (e.g., GDPR, HIPAA). The overall objective of a data steward is the data quality of the data assets, datasets, data records and data elements. This includes documenting metainformation for the data, such as definitions, related rules/governance, physical manifestation, and related data models (most of these properties being specific to an attribute/concept relationship), identifying owners/custodian's various responsibilities, relations insight pertaining to attribute quality, aiding with project requirement data facilitation and documentation of capture rules. Data stewards begin the stewarding process with the identification of the data assets and elements which they will steward, with the ultimate result being standards, controls and data entry. The steward works closely with business glossary standards analysts (for standards), with data architect/modelers (for standards), with DQ analysts (for controls) and with operations team members (good-quality data going in per business rules) while entering data. Data stewardship roles are common when organizations attempt to exchange data precisely and consistently between computer systems and to reuse data-related resources. Master data management often makes references to the need for data stewardship for its implementation to succeed. Data stewardship must have precise purpose, fit for purpose or fitness. == Data steward responsibilities == A data steward ensures that each assigned data element: Has clear and unambiguous data element definition Does not conflict with other data elements in the metadata registry (removes duplicates, overlap etc.) Has clear enumerated value definitions if it is of type Code Is still being used (remove unused data elements) Is being used consistently in various computer systems Is being used, fit for purpose = Data Fitness Has adequate documentation on appropriate usage and notes Documents the origin and sources of authority on each metadata element Is protected against unauthorised access or change Responsibilities of data stewards vary between different organisations and institutions. For example, at Delft University of Technology, data stewards are perceived as the first contact point for any questions related to research data. They also have subject-specific background allowing them to easily connect with researchers and to contextualise data management problems to take into account disciplinary practices. == Types of data stewards == Depending on the set of data stewardship responsibilities assigned to an individual, there are 4 types (or dimensions of responsibility) of data stewards typically found within an organization: Data object data steward - responsible for managing reference data and attributes of one business data entity Business data steward - responsible for managing critical data, both reference and transactional, created or used by one business function. The data steward may also serve as a liaison between the organization's data users and technical teams, helping to bridge the gap between business needs and technical requirements. They may also play a role in educating others within the organization about best practices for data management, and advocating for data-driven decision-making. Process data steward - responsible for managing data across one business process System data steward - responsible for managing data for at least one IT system == Benefits of data stewardship == Systematic data stewardship can foster: Faster analysis Consistent use of data management resources Easy mapping of data between computer systems and exchange documents Lower costs associated with migration to (for example) service-oriented architecture (SOA) Mitigation of data risk Better control of dangers associated with privacy, legal, errors, etc. Assignment of each data element to a person sometimes seems like an unimportant process. But multiple groups have found that users have greater trust and usage rates in systems where they can contact a person with questions on each data element. == Examples == Delft University of Technology (TU Delft) offers an example of data stewardship implementation at a research institution. In 2017 the Data Stewardship Project was initiated at TU Delft to address research data management needs in a disciplinary manner across the whole campus. Dedicated data stewards with subject-specific background were appointed at every TU Delft faculty to support researchers with data management questions and to act as a linking point with the other institutional support services. The project is coordinated centrally by TU Delft Library, and it has its own website, blog and a YouTube channel. The [1]EPA metadata registry furnishes an example of data stewardship. Note that each data element therein has a "POC" (point of contact). In 2023, ETH Zurich launched the Data Stewardship Network (DSN) to facilitate collaboration among employees engaged in data management, analysis, and code development across research groups. The DSN serves as a platform for networking and knowledge exchange, aiming to professionalize the role of data stewards who support research data management and reproducible workflows. Established by the team for Research Data Management and Digital Curation at the ETH Library, the DSN collaborates with Scientific IT Services to provide expertise in areas such as storage infrastructure and reproducible workflows. == Data stewardship applications == Information stewardship applications are business solutions used by business users acting in the role of information steward (interpreting and enforcing information governance policy, for example). These developing solutions represent, for the most part, an amalgam of a number of disparate, previously IT-centric tools already on the market, but are organized and presented in such a way that information stewards (a business role) can support the work of information policy enforcement as part of their normal, business-centric, day-to-day work in a range of use cases. The initial push for the formation of this new category of packaged software came from operational use cases — that is, use of business data in and between transactional and operational business applications. This is where most of the master data management efforts are undertaken in organizations. However, there is also now a faster-growing interest in the new data lake arena for more analytical use cases.

  Read more →
• 

  Classora

  Classora is a knowledge base for the Internet oriented to data analysis. From a practical point of view, Classora is a digital repository that stores structured information and allows it to be displayed in multiple formats: analytically, graphically, geographically (through maps); as well as carry out OLAP analysis. The information contained in Classora comes from public sources and is uploaded into the system through bots and ETL processes. The Knowledge Base has a commercial API for semantic enhancement, and an open web through which any user can access to part of the information collected (it also allows users to complete data and share opinions). Internally, Classora is organized into Knowledge Units and Reports. A «Knowledge Unit» is any element of the World about which information may be stored and presented in the form of a data sheet (a person, a company, a country, etc.) A «Report» is a group of Knowledge Units: a ranking of companies, a sport classification table, a survey about people, etc. In fact, one of the technical capabilities of Classora is that it allows the comparison of reports and knowledge units gathered from different sources, thereby generating an added value for the media in which this information is published: digital media, interactive TV, etc. == Key definitions == === Knowledge unit === The units of knowledge (also known as entries) in Classora are data sheets that have a certain semantic equivalence with the articles on the Wikipedia: they store information about any element of the world, be it a film, a country, a company or an animal. However, they differ from Wikipedia in that Classora stores structured information, enriched with a metadata layer; and therefore it is able to automatically interpret the meaning of each unit of knowledge. === Data report === A report is a group of units of knowledge in which the repetition of elements is not allowed. This definition includes any list, poll, ranking, etc.; and, in general, any consultation that involves more than one unit of knowledge. Classora excels at the reports management due to its visualization capabilities, being able to display data in the form of tables, graphs and maps. Types of reports: Sports scores: Sports competitions results sanctioned by the competent institution. Rankings and lists: All types of interesting and curious lists, whether they have an implicit order or not. Polls: Units of knowledge that are ranked according to users’ votes. Queries to the Knowledge Base: Questions from users using CQL. Networks of connections: automatically calculated from the reports and the taxonomy of each Knowledge Unit. === Organizational taxonomy === An organizational taxonomy (also referred to as entry type) is a data sheet that brings together the common attributes of a set of units of knowledge. For instance, the organizational taxonomy F1 Driver displays attributes such as date of debut, team, etc.; and the organizational taxonomy Football Club presents attributes such as city, stadium, etc. In Classora, taxonomies are hierarchically organized, so that they inherit attributes from their parent taxonomies. For instance, F1 Driver is a subsidiary taxonomy of Sportsperson, which is a subsidiary taxonomy of Person, which in turn is a subsidiary taxonomy of Organism. The simplest type of entry in Classora is Classora Object. All the other taxonomies are its subsidiaries and inherit its attributes. In fact, the only attribute Classora Object possesses is name (all units of knowledge are required to have one name at least). == Architecture of Classora == === Data Extraction Module === The Data Extraction Module consists of a set of robots coordinated by software that also manages the potential incidents. Most of the information available in Classora is automatically uploaded through those robots, which connect to the main online public sources to gather all types of data. There are three categories of robots: Extraction robots: responsible for the massive uploading of reports from official public sources (FIFA, CIA, IMF, Eurostat...). They are used for either absolute or incremental data uploading. Data scanner robots: responsible for looking for and updating the data of a unit of knowledge. They use specific sources to perform this task: Wikipedia, IMDB, World Bank, etc. Content aggregators: they don’t connect to external sources. Instead, they generate new information using Classora’s internal database. === Participatory Module === In Classora’s Open Website, Internet users may participate providing their knowledge as they would on the Wikipedia. There are different ways to participate: adding or correcting data in the Knowledge Base, voting in surveys (participatory rankings) and creating new Knowledge Units and Data Reports. === Connectivity Module === The Knowledge Base is designed to be embedded in multi-platform, multi-channel systems, thus enabling its integration into mobile devices, tablets, interactive TV, etc. This integration may be carried out through specific plugins (for navigators or other devices) or an API REST that provides content in XML or JSON formats. The API is divided into three blocks of operations. The first one is the block of general utility tools (ranging from autosuggest components about geographical hierarchies to operations to obtain the list of today’s celebrity birthdays, using CQL). The second one is the block of operations for widget generation (graphs, maps, rankings) using information from the knowledge base. Finally, there is a block of operations designed for the publication of free-source content. == Project statistics == As of April 2012, 2,000,000 Knowledge Units, 15,000 Reports, around 10,000 Maps and several million potential Comparative Analyses had been added to Classora. According to the site of web metrics Alexa, Classora Open Website is ranked at 100,557 globally and at 2,880 in the Spanish traffic ranking. Users spend an average of 9 ½ minutes in Classora.

  Read more →
• 

  Termcap

  Termcap (terminal capability) is a legacy software library and database used on Unix-like computers that enables programs to use display computer terminals in a terminal-independent manner, which greatly simplifies the process of writing portable text mode applications. It was superseded by the terminfo database used by ncurses, tput, and other programs. A termcap database can describe the capabilities of hundreds of different display terminals. This allows programs to have character-based display output, independent of the type of terminal. On-screen text editors such as vi and Emacs are examples of programs that may use termcap. Other programs are listed in the Termcap category. Access to the termcap database was usually provided by separate libraries, e.g. GNU Termcap. Examples of what the database describes: how many columns wide the display is what string to send to move the cursor to an arbitrary position (including how to encode the row and column numbers) how to scroll the screen up one or several lines how much padding is needed for such a scrolling operation. == History == Bill Joy wrote the first termcap library in 1978 for the Berkeley Unix operating system; it has since been ported to most Unix and Unix-like environments, even OS-9. Joy's design was reportedly influenced by the design of the terminal data store in the earlier Incompatible Timesharing System. == Data model == Termcap databases consist of one or more descriptions of terminals. === Indices === Each description must contain the canonical name of the terminal. It may also contain one or more aliases for the name of the terminal. The canonical name or aliases are the keys by which the library searches the termcap database. === Data values === The description contains one or more capabilities, which have conventional names. The capabilities are typed: boolean, numeric and string. The termcap library has no predetermined type for each capability name. It determines the types of each capability by the syntax: string capabilities have an "=" between the capability name and its value, numeric capabilities have a "#" between the capability name and its value, and boolean capabilities have no associated value (they are always true if specified). Applications which use termcap do expect specific types for the commonly used capabilities, and obtain the values of capabilities from the termcap database using library calls that return successfully only when the database contents matches the assumed type. === Hierarchy === Termcap descriptions can be constructed by including the contents of one description in another, suppressing capabilities from the included description or overriding or adding capabilities. No matter what storage model is used, the termcap library constructs the terminal description from the requested description, including, suppressing or overriding at the time of the request. == Storage model == Termcap data is stored as text, making it simple to modify. The text can be retrieved by the termcap library from files or environment variables. === Environment variables === The TERM environment variable contains the terminal type name. The TERMCAP environment variable may contain a termcap database. It is most often used to store a single termcap description, set by a terminal emulator to provide the terminal's characteristics to the shell and dependent programs. The TERMPATH environment variable is supported by newer termcap implementations and defines a search path for termcap files. === Flat file === The original (and most common) implementation of the termcap library retrieves data from a flat text file. Searching a large termcap file, e.g., 500 kB, can be slow. To aid performance, a utility such as reorder is used to put the most frequently used entries near the beginning of the file. === Hashed database === 4.4BSD based implementations of termcap store the terminal description in a hashed database (e.g., something like Berkeley DB version 1.85). These store two types of records: aliases which point to the canonical entry, and the canonical entry itself. The text of the termcap entry is stored literally. == Limitations and extensions == The original termcap implementation was designed to use little memory: the first name is two characters, to fit in 16 bits capability names are two characters descriptions are limited to 1023 characters. only one termcap entry with its definitions can be included, and must be at the end. Newer implementations of the termcap interface generally do not require the two-character name at the beginning of the entry. Capability names are still two characters in all implementations. The tgetent function used to read the terminal description uses a buffer whose size must be large enough for the data, and is assumed to be 1024 characters. Newer implementations of the termcap interface may relax this constraint by allowing a null pointer in place of the fixed buffer, or by hiding the data which would not fit, e.g., via the ZZ capability in NetBSD termcap. The terminfo library interface also emulates the termcap interface, and does not actually use the fixed-size buffer. The terminfo library's emulation of termcap allows multiple other entries to be included without restricting the position. A few other newer implementations of the termcap library may also provide this ability, though it is not well documented. == Obsolete features == A special capability, the "hz" capability, was defined specifically to support the Hazeltine 1500 terminal, which had the unfortunate characteristic of using the ASCII tilde character ('~') as a control sequence introducer. In order to support that terminal, not only did code that used the database have to know about using the tilde to introduce certain control sequences, but it also had to know to substitute another printable character for any tildes in the displayed text, since a tilde in the text would be interpreted by the terminal as the start of a control sequence, resulting in missing text and screen garbling. Additionally, attribute markers (such as start and end of underlining) themselves took up space on the screen. Comments in the database source code often referred to this as "Hazeltine braindamage". Since the Hazeltine 1500 was a widely used terminal in the late 1970s, it was important for applications to be able to deal with its limitations.

  Read more →
• 

  Branch number

  In cryptography, the branch number is a numerical value that characterizes the amount of diffusion introduced by a vectorial Boolean function F that maps an input vector a to output vector F ( a ) {\displaystyle F(a)} . For the (usual) case of a linear F the value of the differential branch number is produced by: applying nonzero values of a (i.e., values that have at least one non-zero component of the vector) to the input of F; calculating for each input value a the Hamming weight W {\displaystyle W} (number of nonzero components), and adding weights W ( a ) {\displaystyle W(a)} and W ( F ( a ) ) {\displaystyle W(F(a))} together; selecting the smallest combined weight across for all nonzero input values: B d ( F ) = min a ≠ 0 ( W ( a ) + W ( F ( a ) ) ) {\displaystyle B_{d}(F)={\underset {a\neq 0}{\min }}(W(a)+W(F(a)))} . If both a and F ( a ) {\displaystyle F(a)} have s components, the result is obviously limited on the high side by the value s + 1 {\displaystyle s+1} (this "perfect" result is achieved when any single nonzero component in a makes all components of F ( a ) {\displaystyle F(a)} to be non-zero). A high branch number suggests higher resistance to the differential cryptanalysis: the small variations of input will produce large changes on the output and in order to obtain small variations of the output, large changes of the input value will be required. The term was introduced by Daemen and Rijmen in early 2000s and quickly became a typical tool to assess the diffusion properties of the transformations. == Mathematics == The branch number concept is not limited to the linear transformations, Daemen and Rijmen provided two general metrics: differential branch number, where the minimum is obtained over inputs of F that are constructed by independently sweeping all the values of two nonzero and unequal vectors a, b ( ⊕ {\displaystyle \oplus } is a component-by-component exclusive-or): B d ( F ) = min a ≠ b ( W ( a ⊕ b ) + W ( F ( a ) ⊕ F ( b ) ) {\displaystyle B_{d}(F)={\underset {a\neq b}{\min }}(W(a\oplus b)+W(F(a)\oplus F(b))} ; for linear branch number, the independent candidates α {\displaystyle \alpha } and β {\displaystyle \beta } are independently swept; they should be nonzero and correlated with respect to F (the L A T ( α , β ) {\displaystyle LAT(\alpha ,\beta )} coefficient of the linear approximation table of F should be nonzero): B l ( F ) = min α ≠ 0 , β , L A T ( α , β ) ≠ 0 ( W ( α ) + W ( β ) ) {\displaystyle B_{l}(F)={\underset {\alpha \neq 0,\beta ,LAT(\alpha ,\beta )\neq 0}{\min }}(W(\alpha )+W(\beta ))} .

  Read more →
• 

  Consumer relationship system

  Consumer relationship systems (CRS) are specialized customer relationship management (CRM) software applications that are used to handle a company's dealings with its customers. Current consumer relationship systems integrate the software with telephone and call recording systems as well as with corporate systems for input and reporting. Customers can provide input from the company's website directly into the CRS. These systems are popular because they can deliver the 'voice of the consumer' that contributes to product quality improvement and that ultimately increases corporate profits. Consumer relationship systems that provide automated support as well as advanced systems may have artificial intelligence (AI) interfaces that can extract and analyse data collected, or handle basic questions and complaints. == History == The first CRS was developed in the 1980s. In 1981 Michael Wilke and Robert Thornton founded Wilke/Thornton, Inc in Columbus, Ohio, to develop new CRS software.

  Read more →