AI Face Judge

AI Face Judge — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  BulSemCor

  The Bulgarian Sense-annotated Corpus (BulSemCor) (Bulgarian: Български семантично анотиран корпус (БулСемКор)) is a structured corpus of Bulgarian texts in which each lexical item is assigned a sense tag. BulSemCor was created by the Department of Computational Linguistics at the Institute for Bulgarian Language of the Bulgarian Academy of Sciences. == Structure == BulSemCor was created as part of a nationally funded project titled "BulNet – A lexico-semantic network for the Bulgarian Language" (2005–2010). It follows the general methodology of SemCor combined with some specific principles. The corpus for annotation consists of 101,791 tokens covering an excerpt from the Bulgarian "Brown" Corpus modelled on the Brown Corpus.Francis Kucera An important feature of BulSemCor is that the samples are selected using heuristics that provide optimal coverage of ambiguous lexis. BulSemCor is manually sense-annotated according to the Bulgarian WordNet. Its size is comparable to that of other contemporary semantically annotated corpora or pool of acceptable linguistic components. The semantic annotation consists in associating each lexical item in the corpus with exactly one synonym set (synset) in the Bulgarian WordNet that best describes its sense in the particular context. The selection of the best match among the suggested candidates is based on a set of procedures, such as the other synset members, the synset gloss (explanatory definition) and the position of a given candidate in the WordNet structure. == Scale == The number of annotated tokens is 99,480 (the difference in the number of tokens compared to the initial corpus is due to the fact that some of them are not linguistic items). The simple word count is 86,842 and multiword expressions (MWE) are 5,797 (12,638 tokens). == Specific features == All words in BulSemCor are assigned a sense, while according to established practice only simple content words or content word classes (typically nouns and verbs) are annotated. Since 2000 the development of language resources, has broadened to include annotation of function words and multiword expressions covering particular senses or types of words and expressions. In this respect, BulSemCor's annotation is more exhaustive and hence provides greater opportunities for linguistic observations and non-linear programming (NLP) applications. Annotated items inherit the linguistic information associated with the corresponding synset, which along with morphological and semantic tags may include annotation on one or more of the following additional levels: Partial information about the syntactic structure of MWE types – particularly, information about syntactic heads and their dependents; Information about the category of the named entities – names, locations, organisations, dates, numbers, etc.; Information about the taxonomic category of adverbs, such as time, place, manner, degree, quantity, etc.; Information about the type of the syntactic relationships – coordination or subordination – expressed by conjunctions; Information about the original part-of-speech of substantivised words (non-nouns that act as nouns in a particular context); Stylistic/register, grammatical and other information about synsets or individual synset members;

  Read more →
• 

  Pinoy baiting

  Pinoy baiting is a phrase that has been used to refer to acts by non-Filipino individuals, usually celebrities or YouTubers, of posting content online purportedly with the intention of getting the attention of Filipinos, by being surprised about the Philippines or its people. Pinoy baiters are defined as giving superficial and allegedly insincere praises and similar reactions that give recognition to the Philippines or its people. Subsequent responses by Filipinos to what have been referred to as acts of Pinoy baiting have been criticized as a form of cultural cringe. This criticism would subsequently give the advice that Filipinos should not constantly require validation from non-Filipinos about themselves or their country. == Pinoy baiting mediums == === Reaction videos === On social media such as YouTube, channels with specific focus on showing their reaction towards and opinions about certain videos or topics are called reaction channels. Reaction videos are very popular and require minimal effort to create, and thus made it easy for alleged Pinoy baiting to thrive within this video-making genre. === Travel vlogs === Vlogging, short for video blogging, grew in popularity in the 2020s. Most of the popular alleged Pinoy-baiting channels tend to be vlog channels, normally following the same script under such titles as "The Philippines changed us/me", "First impression of the Philippines", "Is this really Manila?" and "Filipinos are such Kind/Good People!", and made while travelling to touristy areas such as Boracay or Bonifacio Global City and taste-testing the fast food chain Jollibee, among others. == Criticism of the phrase == Philippines-based Korean vlogger Jessica Lee had been accused by some YouTube viewers of engaging in Pinoy baiting. In a response vlog, Lee acknowledged that there may be individuals engaging in this "business strategy" of gaining views and subscribers from one of the largest communities online. However, she questioned the objectivity of some use of the phrase, citing any vlogging subject as fair game for a negative impression of being a "baiting" tool for the vlogger treating of that subject. She also invoked vloggers' freedom to choose whatever subject they want to talk about in a deep or shallow manner, while enjoining citizens to exercise their free-market right to unfollow vloggers they hate and follow those vloggers that "make them happy". She also gave her critics an explanation why she ended up vlogging about Philippine and Filipino subjects.

  Read more →
• 

  Opinion Space

  Developed at UC Berkeley, "Opinion Space" (also known as The Collective Discovery Engine) is a social media technology designed to help communities generate and exchange ideas about important issues and policies. Version 1.0 was launched on April 4, 2009, at UC Berkeley, and explored the question "Do you think legalizing marijuana is a good idea?" It has since undergone 4 different iterations, and been used in partnership with various organizations including The Occupy movement (Version 4.0, 5/24/2013) and the African Robots Network (Version 4.0, 5/25/2013). Opinion Space has also been used in collaboration with the United States State Department and the University of California's Berkeley Center for New Media (Version 2.0, 12/1/2009 and Version 3.0, 2/25/2012) to gain public perspective on foreign policy issues. Then U.S. Secretary of State Hillary Rodham Clinton explained, "Opinion Space will harness the power of connection technologies to provide a unique forum for international dialogue. This is...an opportunity to extend our engagement beyond the halls of government directly to the people of the world" (2010). The website uses data visualization and statistical analysis to present and develop public opinion and ideas. Opinion Space is a self-organizing system that uses an intuitive graphical "map" that displays patterns, trends, and insights as they emerge and employs the wisdom of crowds to identify and highlight the most insightful ideas. The system uses a game model that incorporates techniques from deliberative polling, collaborative filtering, and multidimensional visualization.

  Read more →
• 

  Coreu

  COREU (French: Correspondance Européenne – Telex network of European correspondents, also EUKOR-Netzwerk in Austria) is a communication network of the European Union for the communication of the Council of the European Union, the European correspondents of the foreign ministries of the EU member states, permanent representatives of member states in Brussels, the European Commission, and the General Secretariat of the Council of the European Union. The European Parliament is not among the participants. COREU is the European equivalent of the American Secret Internet Protocol Router Network (SIPRNet, also known as Intelink-S). COREU's official aim is fast communication in case of crisis. The network enables a closer cooperation in matters regarding foreign affairs. In actuality the system's function exceeds that of mere communication, it also enables decision-making. COREU's first goal is to enable the exchange of information before and after decisions. Relaying upfront negotiations in preparation of meetings is the second goal. In addition, the system also allows the editing of documents and the decision-making, especially if there is little time. While the first two goals are preparatory measures for a shared foreign policy, the third is a methodical variant marked by practise that is defining for the image of the Common Foreign and Security Policy. == Members == (The following information dates from 2013): There is one representative in each of the capital cities in the EU.(since 1973) In Germany for example, this is the European correspondent (EU-KOR) from the Foreign Office. In Austria it is the European correspondent from the Referat II.1.a in the Federal Ministry for Europe, Integration and Foreign Affairs They are the correspondents (since 1982) for the European Commission They comprise the secretariat for the European Council They also make up the European External Action Service (EEAS) (responsible for foreign policy issues, since 1987) == Data volume and technical details == COREU functions as a spoke-hub distribution paradigm system with the hub in Brussels. The network is operated by the European Union Intelligence and Situation Centre (formerly Joint Situation Center, JSC). The technical infrastructure is located in a building of the European Council. COREU may be described as an advanced telex system with encrypted messages via dedicated terminals. Once a message has reached the destination, it is then redistributed via the local media. In contrast, messages of governments are transmitted via local media to the correspondents and from there delivered point-to-point to Brussels via COREU. In 2010, approximately 8500 communications had been distributed over this network. == History == A telex-based communication system under the name COREU was established in 1973. Originally, only the ministries of Foreign Affairs in the European capitals were connected to it. This telex system was replaced in 1997 by the mail system CORTESY (COREU Terminal Equipment System). The name was retained despite the technical innovation. COREU was reportedly compromised by hackers working for the People's Liberation Army Strategic Support Force, allowing for the theft of thousands of low-classified documents and diplomatic cables.

  Read more →
• 

  Enterprise mobile application

  The term enterprise mobile application is used in the context of mobile apps created/brought by individual organizations for their workers to carry out the functions required to run the organization. It is the process of building a mobile application for the requirements of an enterprise. An enterprise mobile application belonging to an organization is expected to be used by only the workers of that organization. The definition of enterprise mobile application does not include the mobile apps that an organization create for its customers or consumers of the products or services generated by the organization. == Example == An organization, whether for-profit or non-profit, may create a mobile app for its members to track inventory levels of supplies they distribute to their target communities or materials used in product manufacturing. Such a mobile app comes under the definition of enterprise mobile application. However, the same organization may also create another mobile app to sell their products to end users or spread awareness of their services to various communities, and that mobile app would not come under definition of enterprise mobile application. == Enterprise mobile solution providers == Enterprise Mobile solution providers create and develop apps for individual organizations that can buy instead of creating the apps themselves. Reasons for Organizations buying the apps include time and cost savings, technical expertise. Today Enterprise Mobility is playing track role for enterprise transformation. Today, enterprises needs productivity is a fast way. Enterprise mobility helps business owners to build their work in a progressive way by assisting enterprise mobility solutions.

  Read more →
• 

  Data deduplication

  In computing, data deduplication is a technique for eliminating duplicate copies of repeating data. Successful implementation of the technique can improve storage utilization, which may in turn lower capital expenditure by reducing the overall amount of storage media required to meet storage capacity needs. It can also be applied to network data transfers to reduce the number of bytes that must be sent. The deduplication process requires comparison of data 'chunks' (also known as 'byte patterns') which are unique, contiguous blocks of data. These chunks are identified and stored during a process of analysis, and compared to other chunks within existing data. Whenever a match occurs, the redundant chunk is replaced with a small reference that points to the stored chunk. Given that the same byte pattern may occur dozens, hundreds, or even thousands of times (the match frequency is dependent on the chunk size), the amount of data that must be stored or transferred can be greatly reduced. A related technique is single-instance (data) storage, which replaces multiple copies of content at the whole-file level with a single shared copy. While possible to combine this with other forms of data compression and deduplication, it is distinct from newer approaches to data deduplication (which can operate at the segment or sub-block level). Deduplication is different from data compression algorithms, such as LZ77 and LZ78. Whereas compression algorithms identify redundant data inside individual files and encodes this redundant data more efficiently, the intent of deduplication is to inspect large volumes of data and identify large sections – such as entire files or large sections of files – that are identical, and replace them with a shared copy. == Functioning principle == For example, a typical email system might contain 100 instances of the same 1 MB (megabyte) file attachment. Each time the email platform is backed up, all 100 instances of the attachment are saved, requiring 100 MB storage space. With data deduplication, only one instance of the attachment is actually stored; the subsequent instances are referenced back to the saved copy for deduplication ratio of roughly 100 to 1. Deduplication is often paired with data compression for additional storage saving: Deduplication is first used to eliminate large chunks of repetitive data, and compression is then used to efficiently encode each of the stored chunks. In computer code, deduplication is done by, for example, storing information in variables so that they don't have to be written out individually but can be changed all at once at a central referenced location. Examples are CSS classes and named references in MediaWiki. == Benefits == Storage-based data deduplication reduces the amount of storage needed for a given set of files. It is most effective in applications where many copies of very similar or even identical data are stored on a single disk. In the case of data backups, which routinely are performed to protect against data loss, most data in a given backup remain unchanged from the previous backup. Common backup systems try to exploit this by omitting (or hard linking) files that haven't changed or storing differences between files. Neither approach captures all redundancies, however. Hard-linking does not help with large files that have only changed in small ways, such as an email database; differences only find redundancies in adjacent versions of a single file (consider a section that was deleted and later added in again, or a logo image included in many documents). In-line network data deduplication is used to reduce the number of bytes that must be transferred between endpoints, which can reduce the amount of bandwidth required. See WAN optimization for more information. Virtual servers and virtual desktops benefit from deduplication because it allows nominally separate system files for each virtual machine to be coalesced into a single storage space. At the same time, if a given virtual machine customizes a file, deduplication will not change the files on the other virtual machines—something that alternatives like hard links or shared disks do not offer. Backing up or making duplicate copies of virtual environments is similarly improved. == Classification == === Post-process versus in-line deduplication === Deduplication may occur "in-line", as data is flowing, or "post-process" after it has been written. With post-process deduplication, new data is first stored on the storage device and then a process at a later time will analyze the data looking for duplication. The benefit is that there is no need to wait for the hash calculations and lookup to be completed before storing the data, thereby ensuring that store performance is not degraded. Implementations offering policy-based operation can give users the ability to defer optimization on "active" files, or to process files based on type and location. One potential drawback is that duplicate data may be unnecessarily stored for a short time, which can be problematic if the system is nearing full capacity. Alternatively, deduplication hash calculations can be done in-line: synchronized as data enters the target device. If the storage system identifies a block which it has already stored, only a reference to the existing block is stored, rather than the whole new block. The advantage of in-line deduplication over post-process deduplication is that it requires less storage and network traffic, since duplicate data is never stored or transferred. On the negative side, hash calculations may be computationally expensive, thereby reducing the storage throughput. However, certain vendors with in-line deduplication have demonstrated equipment which performs in-line deduplication at high rates. Post-process and in-line deduplication methods are often heavily debated. === Data formats === The SNIA Dictionary identifies two methods: Content-agnostic data deduplication – a data deduplication method that does not require awareness of specific application data formats. Content-aware data deduplication – a data deduplication method that leverages knowledge of specific application data formats. === Source versus target deduplication === Another way to classify data deduplication methods is according to where they occur. Deduplication occurring close to where data is created, is referred to as "source deduplication". When it occurs near where the data is stored, it is called "target deduplication". Source deduplication ensures that data on the data source is deduplicated. This generally takes place directly within a file system. The file system will periodically scan new files creating hashes and compare them to hashes of existing files. When files with same hashes are found then the file copy is removed and the new file points to the old file. Unlike hard links however, duplicated files are considered to be separate entities and if one of the duplicated files is later modified, then using a system called copy-on-write a copy of that changed file or block is created. The deduplication process is transparent to the users and backup applications. Backing up a deduplicated file system will often cause duplication to occur resulting in the backups being bigger than the source data. Source deduplication can be declared explicitly for copying operations, as no calculation is needed to know that the copied data is in need of deduplication. This leads to a new form of link on file systems, called a reference-counted link, or reflink, in some systems (e.g. Linux), or a cloned file on macOS, where one or more inodes (file information entries) are made to share some or all of their data. It is named analogously to hard links, which work at the inode level, and symbolic links, which work at the filename level.The individual entries have a copy-on-write behavior that is non-aliasing, i.e. changing one copy afterwards will not affect other copies. Microsoft's ReFS also supports this operation. Target deduplication is the process of removing duplicates when the data was not generated at that location. Example of this would be a server connected to a SAN/NAS, The SAN/NAS would be a target for the server (target deduplication). The server is not aware of any deduplication, the server is also the point of data generation. A second example would be backup. Generally this will be a backup store such as a data repository or a virtual tape library. === Deduplication methods === One of the most common forms of data deduplication implementations works by comparing chunks of data to detect duplicates. For that to happen, each chunk of data is assigned an identification, calculated by the software, typically using cryptographic hash functions. In many implementations, the assumption is made that if the identification is identical, the data is identical, even though this cannot be true in all cases due to the pigeonhole principle; other implementations do not as

  Read more →
• 

  Hybrid argument (cryptography)

  In cryptography, the hybrid argument is a proof technique used to show that two distributions are computationally indistinguishable. == History == Hybrid arguments had their origin in a papers by Andrew Yao in 1982 and Shafi Goldwasser and Silvio Micali in 1983. == Formal description == Formally, to show two distributions D1 and D2 are computationally indistinguishable, we can define a sequence of hybrid distributions D1 := H0, H1, ..., Ht =: D2 where t is polynomial in the security parameter n. Define the advantage of any probabilistic efficient (polynomial-bounded time) algorithm A as A d v H i , H i + 1 d i s t ( A ) := | Pr [ x ← $ H i : A ( x ) = 1 ] − Pr [ x ← $ H i + 1 : A ( x ) = 1 ] | , {\displaystyle {\mathsf {Adv}}_{H_{i},H_{i+1}}^{\mathsf {dist}}(\mathbf {A} ):=\left|\Pr[x{\stackrel {\$}{\gets }}H_{i}:\mathbf {A} (x)=1]-\Pr[x{\stackrel {\$}{\gets }}H_{i+1}:\mathbf {A} (x)=1]\right|,} where the dollar symbol ($) denotes that we sample an element from the distribution at random. By triangle inequality, it is clear that for any probabilistic polynomial time algorithm A, A d v D 1 , D 2 d i s t ( A ) ≤ ∑ i = 0 t − 1 A d v H i , H i + 1 d i s t ( A ) . {\displaystyle {\mathsf {Adv}}_{D_{1},D_{2}}^{\mathsf {dist}}(\mathbf {A} )\leq \sum _{i=0}^{t-1}{\mathsf {Adv}}_{H_{i},H_{i+1}}^{\mathsf {dist}}(\mathbf {A} ).} Thus there must exist some k s.t. 0 ≤ k < t(n) and A d v H k , H k + 1 d i s t ( A ) ≥ A d v D 1 , D 2 d i s t ( A ) / t ( n ) . {\displaystyle {\mathsf {Adv}}_{H_{k},H_{k+1}}^{\mathsf {dist}}(\mathbf {A} )\geq {\mathsf {Adv}}_{D_{1},D_{2}}^{\mathsf {dist}}(\mathbf {A} )/t(n).} Since t is polynomial-bounded, for any such algorithm A, if we can show that it has a fixed negligible advantage function ε(n) between distributions Hi and Hi+1 for every i, so in particular, ϵ ( n ) ≥ A d v H k , H k + 1 d i s t ( A ) ≥ A d v D 1 , D 2 d i s t ( A ) / t ( n ) , {\displaystyle \epsilon (n)\geq {\mathsf {Adv}}_{H_{k},H_{k+1}}^{\mathsf {dist}}(\mathbf {A} )\geq {\mathsf {Adv}}_{D_{1},D_{2}}^{\mathsf {dist}}(\mathbf {A} )/t(n),} then it immediately follows that its advantage to distinguish the distributions D1 = H0 and D2 = Ht must also be negligible. == Applications == The hybrid argument is extensively used in cryptography. Some simple proofs using hybrid arguments are: If one cannot efficiently predict the next bit of the output of some number generator, then this generator is a pseudorandom number generator (PRG). We can securely expand a PRG with 1-bit output into a PRG with n-bit output.

  Read more →
• 

  CryptoParty

  CryptoParty (Crypto-Party) is a grassroots global endeavour to introduce the basics of practical cryptography such as the Tor anonymity network, I2P, Freenet, key signing parties, disk encryption and virtual private networks to the general public. The project primarily consists of a series of free public workshops. == History == As a successor to the Cypherpunks of the 1990s, CryptoParty was conceived in late August 2012 by the Australian journalist Asher Wolf in a Twitter post following the passing of the Cybercrime Legislation Amendment Bill 2011 and the proposal of a two-year data retention law in that country, the Cybercrime Legislation Amendment Bill 2011. The DIY, self-organizing movement immediately went viral, with a dozen autonomous CryptoParties being organized within hours in cities throughout Australia, the US, the UK, and Germany. Many more parties were soon organized or held in Chile, The Netherlands, Hawaii, Asia, etc. Tor usage in Australia itself spiked, and CryptoParty London with 130 attendees—some of whom were veterans of the Occupy London movement—had to be moved from London Hackspace to the Google campus in east London's Tech City. As of mid-October 2012 some 30 CryptoParties have been held globally, some on a continuing basis, and CryptoParties were held on the same day in Reykjavik, Brussels, and Manila. The first draft of the 442-page CryptoParty Handbook (the hard copy of which is available at cost) was pulled together in three days using the book sprint approach, and was released 2012-10-04 under a CC BY-SA license. === Edward Snowden involvement === In May 2014, Wired reported that Edward Snowden, while employed by Dell as an NSA contractor, organized a local CryptoParty at a small hackerspace in Honolulu, Hawaii on December 11, six months before becoming well known for leaking tens of thousands of secret U.S. government documents. During the CryptoParty, Snowden taught 20 Hawaii residents how to encrypt their hard drives and use the Internet anonymously. The event was filmed by Snowden's then-girlfriend, but the video has never been released online. In a follow-up post to the CryptoParty wiki, Snowden pronounced the event a "huge success." == Media response == In 2013, CryptoParty received messages of support from the Electronic Frontier Foundation and (purportedly) AnonyOps, as well as the NSA whistleblower Thomas Drake, WikiLeaks central editor Heather Marsh, and Wired reporter Quinn Norton. Eric Hughes, the author of A Cypherpunk's Manifesto nearly two decades before, delivered the keynote address, Putting the Personal Back in Personal Computers, at the Amsterdam CryptoParty on 2012-09-27. Marcin de Kaminski, founding member of Piratbyrån which in turn founded The Pirate Bay, regarded CryptoParty as the most important civic project in cryptography in 2012, and Cory Doctorow has characterized a CryptoParty as being "like a Tupperware party for learning crypto." Der Spiegel in December 2014 mentioned "crypto parties" in the wake of the Edward Snowden leaks in an article about the NSA.

  Read more →
• 

  Symbol level

  In knowledge-based systems, agents choose actions based on the principle of rationality to move closer to a desired goal. The agent is able to make decisions based on knowledge it has about the world (see knowledge level). But for the agent to actually change its state, it must use whatever means it has available. This level of description for the agent's behavior is the symbol level. The term was coined by Allen Newell in 1982. For example, in a computer program, the knowledge level consists of the information contained in its data structures that it uses to perform certain actions. The symbol level consists of the program's algorithms, the data structures themselves, and so on.

  Read more →
• 

  Blocknots

  Blocknots were random sequences of numbers contained in a book and organized by numbered rows and columns and were used as additives in the reciphering of Soviet Union codes, during World War II. The Blocknot consisted of a booklet of fifty sheets of 5-figure random additive, 100 additive groups to a sheet. No sheet was used more than once, thus the blocknots were in effect a form of one-time pad. The Soviet Unions highest grade ciphers that were used in the East, were the 5-figure codebook enciphered with the Blocknot book, and were generally considered unbreakable. == Technical Description == Blocknots were distributed centrally from an office in Moscow. Every Blocknot contained 5-figure groups in a number of sheets, for the enciphering of 5-figure messages. The encipherment was effected by applying additives taken from the pad, of which 50-100 5-figure groups appeared. Each pad had a 5-figure number and each sheet had a 2-figure number running consecutively. There were 5 different types of Blocknots, in two different categories The Individual in which each table of random numbers was used only once. The General in which each page of the Blocknot was valid for one day. The security of the additive sequence rested on the choice of different starting points for each message. In 5-figure messages, the blocknot was one of the first 10 Groups in the message. Its position changed at long intervals, but was always easy to re-identify. The Russians differentiated between three types of blocks: The 3-block, DRIERBLOCK. I-block for Individual Block: 50 pages, additive read off in one direction only. The messages could be used and read only between 2 wireless telegraphy stations on one net. The 6-block, SECHSERBLOCK. Z-block for Circular Block: 30 pages, additive read off in either direction. The messages could be used and read, between all W/T stations in a net. The 2-block, ZWEIERBLOCK. OS-block. Used only in traffic from lower to higher formations. Two other types were used, in lower echelons. Notblock: Used in an emergency. Blocknot used for passing on traffic. The distribution of Blocknots was carried out centrally from Moscow to Army Groups then to Armies. The Army was responsible for their distribution throughout the lower levels of the army down to company level. Independent units took their cipher material with them. Occasionally the same blocknot was distributed to two units on different parts of the front, which enabled Depth to be established. Records of all Blocknots used were kept in Berlin and when a repeat was noticed a BLOCKNOT ANGEBOT message was sent out to all German Signals units, to indicate that it may have been possible to break the code using it. There was no certainty in this. A cryptanalyst with the General der Nachrichtenaufklärung stated while being interrogated by TICOM: It seems that depths of up to 8 were established at the beginning of the Russian Campaign but that no 5-figure code was broken after May 1943 German cryptanalysts who were prisoners of war stated under interrogation, that each of the figures 0 to 9 were placed en clair usually within the first ten groups of the text or sometimes at the end. One indicator was the Blocknot number and the consisted of two random figures, the figure representing the type, and the remaining two, the page of the Blocknot being used. In long messages, 000000 was placed in the message when the end of a page had been reached. == Chi number == The Chi-number was the serial numbering of all 5-figure messages passing through the hands of the Cipher Officer, starting on the first of January and ending on thirty-first December of the current year. It always appeared as the last group in an intercepted message, e.g. 00001 on the 1st January, or when the unit was newly set up. The progression of Chi-numbers was carefully observed and recorded in the form of a graph. A Russian corps had about 10 5-figure messages per day, and Army about 20-30 and a Front about 60–100. After only a relatively short time, the individual curves separated sharply and the type of formation could be recognized by the height of the Chi-number alone. == Monitoring == Blocknots were tracked in a card index, that was maintained by the Signal Intelligence Evaluation Centre (NAAS). The NAAS functionality included evaluation and traffic analysis, cryptanalysis, collation and dissemination of intelligence. The card index, which was one amongst several Card Indexes. A careful recording and study of blocks provided the positive clues in the identification and tracking of formations using 5-figure ciphers. The index was subdivided into two files: Search card index, contained all blocknots and chi-numbers whether or not they were known. Unit card index, contained only known Block and Chi-numbers. Inspector Berger, who was the chief cryptanalyst of NAAS 1 stated that the two files formed: The most important and surest instruments for identifying Russian radio nets, known to him. The Blocknots were also used in the Stationary Intercept Company (Feste), the military unit that were designed to work at a lower level to the NAAS, at the Army level and were semi-motorized, and closer to the front. The Feste used the Blocknot value along with several other parameters to build a network diagram. The network diagram was studied extensively, as part of a 6-stage process, that involved several departments within the Feste. The outcome was a metric which determined the most interesting circuit for traffic monitoring, and least interesting, where monitoring of traffic should cease. == Analysis == Johannes Marquart was a mathematician and cryptanalyst who initially worked for Inspectorate 7/VI and later led Referat Ia of Group IV of the General der Nachrichtenaufklärung. Marquart was assigned the study of the Soviet Union Blocknot traffic. Marquart and his unit conducted extensive research in an attempt to discover the method by which they were produced. All the counts which they made, however, failed to reveal any non-random characteristics in the design of the tables, and while they thought the Blocknots must have been generated by machine, they were never able to draw any concrete deductions as a result of their research. == Example == The Soviet 3rd Guard Tank Army transmits a 5-figure message with the Blocknot of 37581 (one of the first 10 groups in the message). On the same day the Block 37582 was used by the same formation. The next day 37583 appeared. Thereafter, for a period, the Army was not heard by German Wireless telegraphy intercept operators, as it was maintaining wireless silence. After a few days, an unidentified net with the Blocknot 37588 is picked up. This message net is claimed, because of the proximity of the blocks (88/83) to be the 3rd Guard Tank Army. The missing Blocknots 84-87 were presumably used in telegraphic, telephonic or courier communications. The Chi number provides confirmation of the first assumption, based on proximity of blocknots in most cases.

  Read more →
• 

  Social media surgery

  A social media surgery is a gathering at which volunteer "surgeons" with expertise in using web tools, chiefly social media, offer free advice in using such tools, to representatives ("patients") of non-profit organisations, charities, community groups and activists, with "no boring speeches or jargon". The idea was conceived by Pete Ashton, with Nick Booth of Podnosh Ltd, who ran the first such surgery in Birmingham, England, on 15 October 2008. In July 2009, a spin-off surgery (dubbed the "Social media mob") started in Mosman, Australia, and in January 2010, the first spin-off surgery in Africa was held. On 16 February 2012, it was announced that the Social Media Surgery movement had won "the Prime Minister’s Big Society Award". Prime Minister David Cameron said: This is an excellent initiative - such a simple idea and yet so effective. The popularity of these surgeries and the fact that they have inspired so many others across the country to follow in their footsteps, is testament to its brilliance. Congratulations to Nick and all the volunteers who have shared their time and expertise to help so many local groups make the most of the internet to support their community. A great example of the Big Society in action. The scheme also won the 2013 Adult Learners' Week "BBC Learning Through Technology Award".

  Read more →
• 

  Data analysis

  Data analysis is the process of inspecting, cleansing, transforming, and modeling data with the goal of discovering useful information, informing conclusions, and supporting decision-making. Data analysis has multiple facets and approaches, encompassing diverse techniques under a variety of names, and is used in different business, science, and social science domains. In today's business world, data analysis plays an important role in making decisions more scientific and helping businesses operate more effectively. It is widely used in fields such as business analytics, healthcare, and artificial intelligence to extract meaningful insights from data. Data mining is a particular data analysis technique that focuses on statistical modeling and knowledge discovery for predictive rather than purely descriptive purposes, while business intelligence covers data analysis that relies heavily on aggregation, focusing mainly on business information. In statistical applications, data analysis can be divided into descriptive statistics, exploratory data analysis (EDA), and confirmatory data analysis (CDA). EDA focuses on discovering new features in the data, while CDA focuses on confirming or falsifying existing hypotheses. Predictive analytics focuses on the application of statistical models for predictive forecasting or classification, while text analytics applies statistical, linguistic, and structural techniques to extract and classify information from textual sources, a variety of unstructured data. All of the above are varieties of data analysis. == Data analysis process == Data analysis is a process for obtaining raw data, and subsequently converting it into information useful for decision-making by users. Statistician John Tukey, defined data analysis in 1961, as:"Procedures for analyzing data, techniques for interpreting the results of such procedures, ways of planning the gathering of data to make its analysis easier, more precise or more accurate, and all the machinery and results of (mathematical) statistics which apply to analyzing data." There are several phases, and they are iterative, in that feedback from later phases may result in additional work in earlier phases. === Data requirements === The data is necessary as inputs to the analysis, which is specified based upon the requirements of those directing the analytics (or customers, who will use the finished product of the analysis). The general type of entity upon which the data will be collected is referred to as an experimental unit (e.g., a person or population of people). Specific variables regarding a population (e.g., age and income) may be specified and obtained. Data may be numerical or categorical (i.e., a text label for numbers). === Data collection === Data may be collected from a variety of sources. A list of data sources are available for study & research. The requirements may be communicated by analysts to custodians of the data; such as, Information Technology personnel within an organization. Data collection or data gathering is the process of gathering and measuring information on targeted variables in an established system, which then enables one to answer relevant questions and evaluate outcomes. The data may also be collected from sensors in the environment, including traffic cameras, satellites, recording devices, etc. It may also be obtained through interviews, downloads from online sources, or reading documentation. === Data processing === Data integration is a precursor to data analysis: Data, when initially obtained, must be processed or organized for analysis. For instance, this may involve placing data into rows and columns in a table format (known as structured data) for further analysis, often through the use of spreadsheet (e.g. Excel) or statistical software. === Data cleaning === Once processed and organized, the data may be incomplete, contain duplicates, or contain errors. The need for data cleaning will arise from problems in the way that the data is entered and stored. Data cleaning is the process of preventing and correcting these errors. Common tasks include record matching, identifying inaccuracy of data, overall quality of existing data, deduplication, and column segmentation. Such data problems can also be identified through a variety of analytical techniques. For example; with financial information, the totals for particular variables may be compared against separately published numbers that are believed to be reliable. Unusual amounts, above or below predetermined thresholds, may also be reviewed. There are several types of data cleaning that are dependent upon the type of data in the set; this could be phone numbers, email addresses, employers, or other values. Quantitative data methods for outlier detection can be used to get rid of data that appears to have a higher likelihood of being input incorrectly. Text data spell checkers can be used to lessen the amount of mistyped words. However, it is harder to tell if the words are contextually (i.e., semantically and idiomatically) correct. === Exploratory data analysis === Once the datasets are cleaned, they can then begin to be analyzed using exploratory data analysis. The process of data exploration may result in additional data cleaning or additional requests for data; thus, the initialization of the iterative phases mentioned above. Descriptive statistics, such as the average, median, and standard deviation, are often used to broadly characterize the data. Data visualization is also used, in which the analyst is able to examine the data in a graphical format in order to obtain additional insights about messages within the data. === Modeling and algorithms === Mathematical formulas or mathematical models (supported by algorithms) may be applied to the data in order to identify relationships among the variables; for example, checking for correlation and by determining whether or not there is the presence of causality. In general terms, models may be developed to evaluate a specific variable based on other variable(s) contained within the dataset, with some residual error depending on the implemented model's accuracy (e.g., Data = Model + Error). Inferential statistics utilizes techniques that measure the relationships between particular variables. For example, regression analysis may be used to model whether a change in advertising (independent variable X), provides an explanation for the variation in sales (dependent variable Y), i.e. is Y a function of X? This can be described as (Y = aX + b + error), where the model is designed such that (a) and (b) minimize the error when the model predicts Y for a given range of values of X. === Data product === A data product is a computer application that takes data inputs and generates outputs, feeding them back into the environment. It may be based on a model or algorithm. For instance, an application that analyzes data about customer purchase history, and uses the results to recommend other purchases the customer might enjoy. === Communication === Once data is analyzed, it may be presented in many formats to the users of the analysis to support their requirements. The users may have feedback, which results in additional analysis. When determining how to communicate the results, the analyst may consider implementing a variety of data visualization techniques to help communicate the message more clearly and efficiently to the audience. Data visualization uses information displays (graphics such as, tables and charts) to help communicate key messages contained in the data. Tables are a valuable tool by enabling the ability of a user to query and focus on specific numbers; while charts (e.g., bar charts or line charts), may help explain the quantitative messages contained in the data. == Quantitative messages == Stephen Few described eight types of quantitative messages that users may attempt to communicate from a set of data, including the associated graphs. Time-series: A single variable is captured over a period of time, such as the unemployment rate over a 10-year period. A line chart may be used to demonstrate the trend. Ranking: Categorical subdivisions are ranked in ascending or descending order, such as a ranking of sales performance (the measure) by salespersons (the category, with each salesperson a categorical subdivision) during a single period. A bar chart may be used to show the comparison across the salespersons. Part-to-whole: Categorical subdivisions are measured as a ratio to the whole (i.e., a percentage out of 100%). A pie chart or bar chart can show the comparison of ratios, such as the market share represented by competitors in a market. Deviation: Categorical subdivisions are compared against a reference, such as a comparison of actual vs. budget expenses for several departments of a business for a given time period. A bar chart can show the comparison of the actual versus the reference amount. Frequency distribution:

  Read more →
• 

  Key frame

  In animation and filmmaking, a key frame (or keyframe) is a drawing or shot that defines the starting and ending points of a smooth transition. These are called frames because their position in time is measured in frames on a strip of film or on a digital video editing timeline. A sequence of key frames defines which movement the viewer will see, whereas the position of the key frames on the film, video, or animation defines the timing of the movement. Because only two or three key frames over the span of a second do not create the illusion of movement, the remaining frames are filled with "inbetweens". == Use of key frames as a means to change parameters == In software packages that support animation, especially 3D graphics, there are many parameters that can be changed for any one object. One example of such an object is a light. In 3D graphics, lights function similarly to real-world lights. They cause illumination, cast shadows, and create specular highlights. Lights have many parameters, including light intensity, beam size, light color, and the texture cast by the light. Supposing that an animator wants the beam size to change smoothly from one value to another within a predefined period of time, that could be achieved by using key frames. At the start of the animation, a beam size value is set. Another value is set for the end of the animation. Thus, the software program automatically interpolates the two values, creating a smooth transition. == Video editing == In non-linear digital video editing, as well as in video compositing software, a key frame is a frame used to indicate the beginning or end of a change made to a parameter. For example, a key frame could be set to indicate the point at which audio will have faded up or down to a certain level. == Video compression == In video compression, a key frame, also known as an intra-frame, is a frame in which a complete image is stored in the data stream. In video compression, only changes that occur from one frame to the next are stored in the data stream, in order to greatly reduce the amount of information that must be stored. This technique capitalizes on the fact that most video sources (such as a typical movie) have only small changes in the image from one frame to the next. Whenever a drastic change to the image occurs, such as when switching from one camera shot to another or at a scene change, a key frame must be created. The entire image for the frame must be output when the visual difference between the two frames is so great that representing the new image incrementally from the previous frame would require more data than recreating the whole image. Because video compression only stores incremental changes between frames (except for key frames), it is not possible to fast-forward or rewind to any arbitrary spot in the video stream. That is because the data for a given frame only represents how that frame was different from the preceding one. For that reason, it is beneficial to include key frames at arbitrary intervals while encoding video. For example, a key frame may be output once for each 10 seconds of video, even though the video image does not change enough visually to warrant the automatic creation of the key frame. That would allow seeking within the video stream at a minimum of 10-second intervals. The downside is that the resulting video stream will be larger in disk size because many key frames are added when they are not necessary for the frame's visual representation. This drawback, however, does not produce significant compression loss when the bitrate is already set at a high value for better quality (as in the DVD MPEG-2 format).

  Read more →
• 

  Professional network service

  A professional network service (or, in an Internet context, simply a professional network) is a type of social network service that focuses on interactions and relationships for business opportunities and career growth, with less emphasis on activities in personal life. A professional network service is used by working individuals, job-seekers, and businesses to establish and maintain professional contacts, to find work or hire employees, share professional achievements, sell or promote services, and stay up-to-date with industry news and trends. According to LinkedIn managing director Clifford Rosenberg in an interview with AAP in 2010, "[t]his is a call to action for professionals to re-address their use of social networks and begin to reap as many rewards from networking professionally as they do personally." Businesses mostly depend on resources and information outside the company and to get what they need, they need to reach out and professionally network with others, such as employees or clients as well as potential opportunities. "Nardi, Whittaker, and Schwarz (2002) point out three main tasks that they believe networkers need to attend to keep a successful professional (intentional) network: building a network, maintaining the network, and activating selected contacts. They stress that networkers need to continue to add new contacts to their network to access as many resources as possible and to maintain their network by staying in touch with their contacts. This is so that the contacts are easy to activate when the networker has work that needs to be done." By using a professional network service, businesses can keep all of their networks up-to-date, and in order, and helps figure out the best way to efficiently get in touch with each of them. A service that can do all that helps relieve some of the stress when trying to get things done. Not all professional network services are online sites that help promote a business. Some services connect the user to other services that help promote the business other than online sites, such as phone/Internet companies that provide services and companies that specifically are designed to do all of the promoting, online and in person, for a business. == History == In 1997, professional network services started up throughout the world and continue to grow. The first recognizable site to combine all features, such as creating profiles, adding friends, and searching for friends, was SixDegrees.com. According to Boyd and Ellison's article, "Social Network Sites: Definition, History, and Scholarship", from 1997 to 2001, several community tools began supporting various combinations of profiles and publicly articulated Friends. Boyd and Ellison go on to say that the next wave began with Ryze.com in 2001. It was introduced as a new way "to help people leverage their business networks". == Inside the works == Quite a lot of work is put into a professional network service, such as the number of hours that go into them and the type of people they work for, as well as the business model of it all, such as the professional interaction and the multiple services they deal with. === Types of services === Some professional network services not only help promote the business but can also help in connecting to other people. Those services may include a specific phone and/or Internet company or a company that helps to connect with other businesses. According to the Society for New Communications Research (SNCR), there are at least nine online professional networks that are being used. === Professional interaction === Kaplan and Haenlein elaborate on five key considerations for companies when utilizing media. These include the importance of careful selection, the option to choose existing applications or develop custom ones, ensuring alignment with organizational activities, integrating a comprehensive media plan, and providing accessibility to all stakeholders. ==== Choose carefully ==== "Choosing the right medium for any given purpose depends on the target group to be reached and the message to be communicated. On one hand, each Social Media application usually attracts a certain group of people, and firms should be active wherever their customers are present. On the other hand, there may be situations whereby certain features are necessary to ensure effective communication, and these features are only offered by one specific application." ==== Ensure activity alignment ==== "Sometimes you may decide to rely on various Social Media, or a set of different applications within the same group, to have the largest possible reach." "Using different contact channels can be a worthwhile and profitable strategy." According to the Society for New Communications Research at Harvard University, "the average professional belongs to 3–5 online networks for business use, and LinkedIn, Facebook, and Twitter are among the top used." ==== Integrate a media plan ==== Social media and traditional media are "both part of the same: your corporate image" in the customers' eyes. ==== Allow access to all ==== "...once the firm has decided to utilize Social Media applications, it is worth checking that all employees may access them." According to the SNCR, "the convergence of Internet, mobile, and social media has taken significant shape as professionals rely on anywhere access to information, relationships, and networks." ==== Online usage ==== "Half of the respondents report participating in 3 to 5 online professional networks. Another three in ten participate in 6 or more professional networks." "Popular social networks are now being used frequently as Professional Communities. More than nine in ten respondents indicated that they use LinkedIn and half reported using Facebook. Twitter and blogs were frequently listed as 'professional networks'." === Business model === According to Michael Rappa's article, Business models on the Web", "a business model is the method of doing business by which a company can sustain itself – that is, generate revenue. The business model spells out how a company makes money by specifying where it is positioned in the value chain." Rappa mentions that there are at least nine basic categories from which a business model can be separated. Those categories are a brokerage, advertising, infomediary, merchant, manufacturer, affiliate, community, subscription, and utility. "...a firm may combine several different models as part of its overall Internet business strategy." At first, Flickr started as a way to mainstream public relations. == Social impact == When it comes to the social impact that professional network services have on today's society, it has proved to increase activity. According to the SNCR, "[t]hree quarters of respondents rely on professional networks to support business decisions. Reliance has increased for essentially all respondents over the past three years. Younger (20–35) and older professionals (55+) are more active users of social tools than middle-aged professionals. More people are collaborating outside their company wall than within their organizational intranet." == Limitations == Since the internet and social media are a part of this "world where consumers can speak so freely with each other and businesses have increasingly less control over the information available about them in cyberspace", most firms and businesses are uncomfortable with all the freedom. According to Kaplan and Haenlein's article, "Users of the world, unite! The challenges and opportunities of Social Media", businesses are pushed aside and are only able to sit back and watch as their customers publicly post comments, which may or may not be well-written.

  Read more →
• 

  Protecting Kids From Social Media Act

  Protecting Kids on Social Media Act or HB 1891 is an American law that was introduced by William Lamberth of Sumner County, Tennessee and was signed into law by Tennessee's governor on May 2, 2024. The bill requires social media websites such as X, YouTube, TikTok, Facebook and others to verify the age of users and if those users are under 18, they must have parental consent. == Progress == The law passed the Tennessee State Legislature with little opposition: the bill had only two no votes in the House from Aftyn Behn and Vincent B. Dixie, and it had zero no votes in the Senate. == Bill summary == Every social media company must verify the age of new users after the law takes effect, and if the user had created an account before the law took effect, they must verify the age of the person attempting to access the account within 14 days. If the new user or the user who originally owned an account is under 18 years of age, they must get parental consent and the third party or social media company must not retain the data from the age verification process or obtaining parental consent. Parents who are account holders of those under 18 can view the privacy settings, set daily time restrictions, and implement breaks during which the minor cannot access the account. The law is enforced by the Attorney General of Tennessee and went into effect on January 1, 2025. == Lawsuit == On October 3, 2024, the trade association NetChoice filed a lawsuit against Tennessee Attorney General Jonathan Skrmetti in the Middle District Court of Tennessee, claiming that the law violates the First Amendment. The Judge for the case is William L. Campbell Jr. An initial case management conference was originally scheduled for December 4, 2024, however it was delayed because of the Supreme Court case United States v. Skrmetti, recommending that the conference be delayed after January 20, 2025. On February 14, 2025, Judge Eli Richardson denied NetChoice's motion for a temporary restraining order because it would disrupt the status quo of the case.

  Read more →