AI Face Swap Gif

AI Face Swap Gif — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Agent verification

    Agent verification

    Agent verification is activity to gain assurances that purposeful artificial constructs act in accordance with their specifications. While primitive forms of inorganic agents have been used in manufacturing for centuries, the study of artificial agents did not begin until the mid 20th century. Foundational work on such agents was closely bound with the emergence of artificial intelligence as an academic discipline. Early agents deployed for industrial control systems and in computing were often controlled by quite simple logic however, not involving artificial intelligence as such. When deployed as part of a multi-agent system, even such simple agents could require special agent orientated testing methods, as their collective behaviour was challenging to verify with traditional testing techniques. Difficulties in providing assurances that agents will not behave in dangerous ways became more prevalent after the introduction of LLM agents, especially after the rapid acceleration of their deployment in 2025. The verification of agent behaviour can be conducted by formal or informal methods. Informal verification requires less mathematical skill. But when agents are part of systems where errors have significant risks — such as danger to human life, environmental damage or major financial loss — formal verification is preferred. Both regulators and system designers themselves like formal verification as it provides a high degree of mathematical certainty. It is not however always possible to formally test all aspects of an agent based system's behaviour, especially where newer LLM based agents are concerned, due in part to their high degree of autonomy. Accordingly, agent verification for low impact deployments might be carried out only with informal methods, while for high impact deployments, it may be performed with a mix of formal and informal techniques. == Terminology == In academia, the term agent verification is often defined to mean activity concerned with gaining assurance that the agent behaves in accordance with its specification - whether by processes such as testing or simulation. 'Verification' is typically contrasted with 'validation', the latter meaning activity concerned with checking that the specification itself meets user or real world needs. Such definitions are not universally adhered to however - for example, in some workplaces and documents, the words 'verification' and 'validation' can be used synonymously. Efforts to gain confidence in Agents have intensified sharply since 2025 due to the rapid roll out of LLM agents; different terms are sometimes used in the commercial sector. Here the term 'agent verification' can be used in the same sense as it is in academia, but sometimes the same activity can be covered by more ambiguous and wider ranging terms such as 'Agent governance' , 'Agent observability' or 'AI agent policing'. == History == === Classical agents === The theoretical underpinnings for artificial (inorganic) agents emerged in the mid 20th century, with establishment of cybernetics and artificial intelligence. Oliver Selfridge's 1958 Pandemonium - A Paradigm for Learning paper was an important early theoretical contribution in establishing agent oriented architecture. Practical implementations of agents for real world applications began to become widespread in the 1990s, after the introduction of the belief–desire–intention software model (BDI), and agent-oriented programming. Pure digital agents were deployed in computer infrastructure for purposes such as monitoring, while agents connected to real-world sensors and actuators were increasingly used in industrial control systems. While the concept of artificial agents was interwoven with early artificial intelligence studies right from the start, early agents lacked general purpose reasoning capabilities, often only having simple if then logic. Even a device as simple as a thermostat, which has a sensor and a means of acting, can be considered a proto agent in this sense. Verifying the behaviours of a simple single agent system is not generally especially difficult, but it can be a different matter when several simple agents coexist in the same system. Craig Reynolds's work on boids showed that relatively complex, "intelligent" behaviour can emerge from a number of such simple agents working together in a Multi-agent system (MAS). By the 1990s, even the behaviour of a single agent system could sometimes be quite complex; in accordance with the Belief–desire–intention software model, agents could have believes that might evolve over time. Agents were increasingly introduced that were controlled by quite large decision tree models, which had new vulnerabilities to adversarial attack. It was becoming increasingly apparent that traditional software verification methods had limitations for testing such agents, or even for the more primitive type of agents when they were deployed as part of a MAS. It was the use of agents for industrial control systems, sometimes associated with robotics, that lent urgency to the practice of agent verification. Informal testing might be acceptable for digital agents used say to monitor whether each of an organisation's computers are properly licensed. But with an increasing potential for faulty agents to result in a failure that might cause a large fire to break out at a chemical manufacturing plant, a botched medical operation, or even a crashed aircraft, the need to develop reliable means of verifying behaviour of such agents was considered urgent. The Foundation for Intelligent Physical Agents was established in 1996. From the late 90s, a growing number of industry and university based scientists began working on the problem, with researchers publishing papers on the verification of both single and multi agent systems. Much of this work showed how formal verification techniques like model checking could be used to gain a high level of assurance that agent based systems would conform with their specification. A 2018 systematic review covering 231 studies found that model checking was the most common technique for agent verification, with theorem proving the second most commonly used formal verification method. In the first two decades of the 20th century, agents run by AI became more common, with Siri and Alexa being well known examples. But such agents still lacked general reasoning capabilities and did not pose new pressing problems for agent verification. === General purpose reasoning agents === The advent of LLMs created huge potential for further use of artificial agents, as agents based on them could have general purpose cognitive abilities. Agents run by LLMs (and occasionally non-LLM foundation models) have similar vulnerability to adversarial attack as those run by decision tree models. The wider scope of actions for LLM agents has created new challenges for their verification, over and above those present for classical agents. For example, the LLM's neural network endows it with infinite domains, an especial challenge for traditional formal verification techniques. Academics began to study the problems involved in verifying LLM agents from 2018. Deployment of such agents began to accelerate in late 2023 after OpenAI's "function-calling" API was made available, and especially after Anthropic's late 2024 introduction of Model Context Protocol (MCP), a standardised way for LLM agents to gain contextual awareness, and to act on the world by calling various external tools. The rapid rollout of LLM agents following MCP's release has seen the task of agent verification receive increased attention within academia, and also from the private sector. In 2024 and 2025 several startups focusing on LLM agent verification have been founded in both Europe and the US to meet growing demand. == Approaches == === Formal verification === Formal verification involves proving the correctness of some or all aspects of a system using mathematical methods. Such methods can range from manual formal proof, to verification assisted with automated theorem provers like Isabelle. For agent verification, model checking is by far the most frequently used formal verification method; for pre-LLM models it was often complemented with techniques using computation tree logic. Another common method is theorem proving. Formal verification provides a higher degree of confidence than informal methods, but it is not always used, even when it is possible. Sometimes a person or organisation developing software agents won't have the necessary skills, or may not see it as worth the effort if the agent(s) will not have the ability to cause much harm even if they malfunction. When agents are deployed in systems where errors could have serious consequences, the ability of formal verification methods to provide mathematical certainty tends to be strongly preferred by both regulators and designers themselves. But even for high impact systems, formal verificatio

    Read more →
  • Social History and Industrial Classification

    Social History and Industrial Classification

    Social History and Industrial Classification (SHIC) is a classification system used by many British museums for social history and industrial collections. It was first published in 1983. == Purpose == SHIC classifies materials (books, objects, recordings etc.) by their interaction with the people who used them. For example, a carpenter's hammer is classified with other tools of the carpenter, and not with a blacksmith's hammer. In contrast other classification systems, for example the Dewey Decimal Classification, might class all hammers together and close to the classification for other percussive tools. The specialist subject network, Social History Curator's Group (SHCG), obtained funding in 2012 to develop an on-line version, now on their website http://www.shcg.org.uk/ == Scheme == Materials are classified under four major category numbers: Community life Domestic and family life Personal life Working life Further classification within a category is by the use of further numbers after the decimal point. It is permissible to assign more than one classification in cases where the object had more than one use.

    Read more →
  • Rohit Chadda

    Rohit Chadda

    Rohit Chadda (born 26 August 1982) is an Indian investment banker and entrepreneur, who is the President & COO of Times Network. He leads the tech business portfolio and AI transformation of Times Group covering verticals like media tech, OTT, fintech, health tech, edu tech, ecommerce, gaming and sports. Previously, CEO of the digital business at Essel Group (Zee Entertainment, Zee Media and DNA), he was the co-founder of online food ordering platform Foodpanda. He is also the founder of omni-channel digital payments platform PayLo. He has been attributed for the turnaround of Zee Digital driving 4x growth in 2 years and bringing Zee's digital business to the second position on ComScore from ninth position making Zee the second largest digital media group in India. He has been featured among Top Tech CEOs of the decade (2010–2020) in India and was featured among Fortune 40 under 40 in 2015. == Education and early career == Chadda graduated from Delhi Technological University (formerly Delhi College of Engineering) with a degree in computer engineering and worked as a software engineer for Computer Sciences Corporation. In 2007 he joined Indian Institute of Management Calcutta to do his MBA after which he worked at Merrill Lynch as an investment banker in United Kingdom. He took an internal transfer to India in 2011. == Career == === Foodpanda === Chadda began his career in 2012 when he co-founded foodpanda. foodpanda expanded to around 40 countries before being bought by Delivery Hero. Before foodpanda got popular, he joked that he delivered pizza for a living. foodpanda had raised a total investment of over US$300 million till 2015. Chadda in the middle of 2015 stepped down from day-to-day responsibilities at Foodpanda to launch his digital payments startup. Foodpanda was acquired by its global competitor Delivery Hero in 2016. === Paylo === In 2015, he launched an omni-channel digital payments platform PayLo which acquired the in-restaurant payments app Ruplee in March 2016 for an undisclosed sum. PayLo was successful in the wake of demonetisation in India and expanded pan-India before being acquired by Immortal Technologies. Chadda believes that execution is more important than the idea to make a startup successful and the key challenge for experienced professionals to work in a startup environment is to unlearn what they have previously learned. PayLo acquired Ruplee before being itself acquired by Immortal Technologies. === Zee Group === Chadda took over as CEO of digital publishing of Zee Group in May 2019. Since 2017, he had led global product and strategy for Zee Group launching ZEE5, the flagship OTT of Zee Entertainment, across 170+ countries. Since June 2019, Zee Digital, the online arm of the Zee group, has registered the highest growth year-on-year among the top media publishers in India. Times Internet Limited, Network 18 Group, and India Today Group have grown by 45%, 21%, and 22% respectively from June 2020 over June 2019 while Zee Digital witnessed a growth of 123% over the same period. Zee Digital achieved its first milestone in September 2019 by crossing 100 million unique monthly visitors and was ranked 6th in the news and information category on ComScore India rankings at the time. Later in the month of March 2020 it crossed 150 million unique monthly visitors mark moving to 4th position. Further in May 2020 Zee Digital moved to 3rd position by crossing 185 million unique monthly visitors mark before finally ranking 2nd position in June 2020 in the ComScore rankings among all digital media groups in India. Chadda has led the transformation of the business of Zee Digital by scaling it to over 200 million users from 60 million users making it the second-largest digital media group in India. He attributes the growth from rank 9 to rank 2 in one year to the data and technology driven approach to content and the focus on vernacular languages. During his tenure, Zee Digital launched 8 new brand websites and 3 new languages to expand the product portfolio to 20 brands and 12 languages. During the US elections in November 2020, Zee Digital launched the English global news channel WION through a digital first approach across Asia Pacific, Middle East, UK and North America. Chadda launched Zee's UGC short video platform HiPi in the midst of the TikTok ban in India. Hipi was first launched within ZEE5 app ecosystem to capitalise on the reach of the OTT platform. After the success of the POC, he launched a standalone app for HiPi. HiPi is a short video platform that provides a complete video creation ecosystem along with news avenues of monetisation to content creators. He plans to use Zee's network reach of 600 million broadcast viewers and 300 million digital users to get creators on HiPi. HiPi launched India's first digital star hunt to allow users to audition for ZEE5 original shows through the short video platform. === Times Group === Chadda took over as President & COO of Times Network in September 2022. Leading the digital transformation of the group Chadda launched 11 new products in 18 months expanding the group's presence to various verticals in the tech business like fintech, health tech, edu tech, auto tech, OTT, ecommerce and gaming while extending the news vertical into business news, tech news and various vernacular languages. Within 4 months of his stint, in January 2023 he launched the digital platform for ET Now, targeting Gen Z, early jobbers and first time investors and laying the foundation for the fintech expansion for the brand. Since then, the product has expended to Hindi language targeting the larger Indian audience through the launch of ET Now Swadesh and further expanding to fintech business by launching ET Now Advisor, a distribution business focussing to upselling of cards, loans etc. to consumers by educating them and enabling them to make the right choices. ET Now reached 10 million users within the first 20 days of launch and became the No.1 business news channel on YouTube with 200 million views in April and May 2024. Expanding to health-tech, he launched AI powered daily health companion Health & Me in the presence of actor & fitness enthusiast Milind Soman. Chadda unveiled the auto-tech platform for Times Drive together with Union Minister of Road Transport and Highways, Nitin Gadkari showcasing the AI assisted platform that helps consumers make the right decisions when it comes to their automotive needs. In order to expand the group's presence into tech and gaming, Chadda acquired India's largest and most popular tech magazine Digit along with their digital platforms Digit.in and Skoar.gg in June 2024. Within a year, he was able to turnaround Digit's business with Digit.in becoming the No.1 Tech news platform in India in April 2025. Times Network launched college discovery platform unilist.in to enable students and parents search for the right course and institute for their higher education needs. With a focus on sports and gaming, Chadda launched India's first Inter-college esports championship under the brand of SKOAR College Gaming Championship. Times Network launched its OTT app Times Play under his leadership. The platform expanded its presence in the US through a partnership with Sling TV. He launched Pickleball Now which is the World's first TV channel focussed on the sport of Pickleball covering tournaments and leagues across the World. The channel has presence on TV and digital platforms and is being distributed to global markets through partnerships with BOTIM, Distro TV, Yupp TV and Rumble. In India, the channel is available on Jio TV, Jio TV+, Airtel Xtream Play, OTT Play, Dailyhunt. Times Group has launched India's Official Pickleball League affiliated with Indian Pickleball Association and Global Pickelball Federation which shall also be streamed live on Pickleball Now from 1st to 7th Dec 2025. === Investing and speaking === Chadda is a mentor at Esselerator, a Startup accelerator by Subhash Chandra Foundation. Esselerator is an initiative by Subhash Chandra, a billionaire Media baron, to promote and support tech entrepreneurs in domains like Media, Fintech and Education. Its powered by TiE Mumbai. Chadda is an angel investor in multiple technology startups like online school aggregator platform SchoolForSure.com. In 2019, he spoke at DPS to students on starting a business. At the time he remained CEO of Zee group's digital business division. == Philanthropy == Chadda organised a £1 mliion charity bike ride in aid of the British Asian Trust which saw participation by the Prince of Wales. Chadda presented the Prince of Wales with a cycling vest, which was said to be for his grandchildren. Chadda supports a non-profit organisation Mukkamaar founded by Bollywood actress Ishita Sharma that works towards fighting crime against women by teaching free self defence to young girls. He is helping the organisation launch their digital program through a WhatsApp-based chatbot. == A

    Read more →
  • Z.ai

    Z.ai

    Knowledge Atlas Technology Joint Stock Co., Ltd., branded internationally as Z.ai, is a Chinese technology company specializing in artificial intelligence (AI). The company was formerly known as Zhipu AI outside China until its rebranding in 2025. Z.ai's flagship product is the GLM (General Language Model) family of large language models, which the company has released under the free and open-source MIT License since July 2025. As of 2024, it is one of China's "AI tiger" companies by investors and considered to be the third-largest LLM market player in China's AI industry according to the International Data Corporation. In January 2025, the United States Commerce Department blacklisted the company in its Entity List due to national security concerns. == History == Founded in 2019, the startup company began from Tsinghua University and was later spun out as an independent company. Researchers published an Association for Computational Linguistics conference paper in May 2022 introducing the GLM (General Language Model) training algorithm, which uses an "autoregressive blank infilling" strategy that creates cloze tests by randomly removing segments of input text and trains the model to autoregressively regenerate the removed text. In 2023, it raised 2.5 billion yuan (approx. 350 million in USD) from Alibaba Group and Tencent, along with Meituan, Ant Group, Xiaomi, and HongShan. In March 2024, Zhipu AI announced it was developing a Sora-like technology to achieve artificial general intelligence (AGI). In May 2024, the Saudi Arabian finance firm Prosperity7 Ventures, LLC participated in a USD $400 million financing round for Zhipu AI with a valuation of approximately 3 billion USD. In July 2024, they debuted the Ying text-to-video model. Zhipu released GLM-4-Plus in August 2024. In October 2024, Zhipu released GLM-4-Voice, an end-to-end speech large language model that can adjust its tone or dialect. Zhipu disclosed in April 2025 that it had started preparing for its initial public offering (IPO) and released two models under the free and open-source MIT License. In May 2025, the company sealed a 61.28 million yuan deal from the Chinese government for city projects in Hangzhou. In July 2025, Zhipu AI released GLM-4.5 and GLM-4.5 Air, their next generation language models, and the company rebranded itself as Z.ai internationally. In August 2025, Z.ai announced that their GLM models are compatible with Huawei's Ascend processors. On August 11, 2025, Z.ai released a new vision-language model (VLM) with a total of 106B parameters, GLM-4.5V. In late September 2025, the company released GLM-4.6 using China's domestic chips such as those from Cambricon Technologies. Z.ai released GLM-4.6V and GLM-4.7 in December 2025. That same year, the company changed its official name to Knowledge Atlas Technology JSC Ltd. On 8 January 2026, Z.ai held its IPO on the Hong Kong Stock Exchange to become a listed company. It is considered to be China's first major LLM company that went through an IPO. On February 11, 2026, Z.ai released GLM-5. In late February 2026, Z.ai's shares fell by 23%, and had a shortage of compute resources, leading to user complaints and Z.ai issuing a public call for support. Z.ai also restricted new user signups. In late March, 2026, Z.ai released the GLM-5.1 model to subscription users. On April 8th, 2026, Z.ai released GLM-5.1 as open-source. The same day, Z.ai increased its API prices by 10%, but maintained a lower price than its United States competitor Anthropic's Opus 4.6 model. On release, the company's share price increased 11.5%. == Description == Z.ai provides the following products and services: General Language Model (commonly abbreviated as GLM; formerly known as ChatGLM), a series of pre-trained dialogue models initially developed by Zhipu AI and Tsinghua KEG in 2023. GLM 4.5, released in July 2025 by Z.ai, can run on eight NVIDIA H20 chips. The release of GLM-4.6 in late September 2025 marked the first integration of FP8 and Int4 quantization on Cambricon chips. It also supports native FP8 on Moore Threads GPUs. Ying, a text-to-video model that generates image and text prompts into a six-second video clip for around 30 seconds. AutoGLM, an AI agent application that uses voice commands to complete tasks within a smartphone. The app can analyze complex tasks such as ordering an item from a nearby store and repeating an order based from the user's shopping history. AMiner, created by Jie Tang (co-founder of Z.ai) in March 2006, now owned by Z.ai. Z.ai has offices in the Middle East, United Kingdom, Singapore, and Malaysia, along with innovation center projects across Southeast Asia (2025). In January 2025, the United States Commerce Department added the company to its Entity List, citing national security concerns. == Models ==

    Read more →
  • CloudMinds

    CloudMinds

    CloudMinds is an operator of cloud-based systems for cognitive robotics. == History == CloudMinds was founded in 2015 and is backed by SoftBank, Foxconn, Walden Venture Investments, and Keytone Ventures. CloudMinds has developed research in smart devices, robot control, high-speed security networks, and cloud intelligence integration. CloudMinds developed the Mobile Intranet Cloud Services (MCS) based on these technologies in order to increase the information security of the cloud robot remote control. The technology has been applied in the fields of finance, medicine, the military, public safety, and large-scale manufacturing. == U.S. sanctions == In May 2020, CloudMinds was added to the Bureau of Industry and Security's Entity List due to U.S. national security concerns.

    Read more →
  • KataGo

    KataGo

    KataGo is a free and open-source computer Go program, capable of defeating top-level human players. First released on 27 February 2019, it is developed by David Wu, who also developed the Arimaa playing program bot_Sharp which defeated three top human players to win the Arimaa AI Challenge in 2015. KataGo's first release was trained by David Wu using resources provided by his employer Jane Street Capital, but it is now trained by a distributed effort. Members of the computer Go community provide computing resources by running the client, which generates self-play games and rating games, and submits them to a server. The self-play games are used to train newer networks and the rating games to evaluate the networks' relative strengths. KataGo supports the Go Text Protocol, with various extensions, thus making it compatible with popular GUIs such as Lizzie. As an alternative, it also implements a custom "analysis engine" protocol, which is used by the KaTrain GUI, among others. KataGo is widely used by strong human go players, including the South Korean national team, for training purposes. KataGo is also used as the default analysis engine in the online Go website AI Sensei, as well as OGS (the Online Go Server). == Technology == Based on techniques used by DeepMind's AlphaGo Zero, KataGo implements Monte Carlo tree search with a convolutional neural network providing position evaluation and policy guidance. Compared to AlphaGo, KataGo introduces many refinements that enable it to learn faster and play more strongly. Notable features of KataGo that are absent in many other Go-playing programs include score estimation; support for small boards, rectangular boards, and large boards; arbitrary values of komi and handicaps; and the ability to use various Go rulesets and adjust its play and evaluation for the small differences between them. === Network === The network used in KataGo are ResNets with pre-activation. While AlphaGo Zero has only game board history as input features (as it was designed as a general architecture for board games, subsequently becoming AlphaZero), the input to the network contains additional features designed by hand specifically for playing Go. These features include liberties, komi parity, pass-alive, and ladders. The trunk is essentially the same as in AlphaGo Zero, but with global pooling layers added to allow the network to be conditioned on global context such as ko fights. This is similar to the Squeeze-and-Excitation Network. The network has two heads: a policy head and a value head. The policy and value heads are mostly the same as in AlphaGo Zero, but both heads have auxiliary subheads to provide auxiliary loss signal for faster training: Policy head: predicts policy for the current player's move this turn, and the opponent player's move in the next turn. A policy Each is a logit array of size 19 × 19 + 1 {\displaystyle 19\times 19+1} , representing the logit of making a move in one of the points, plus the logit of passing. Value head: predicts game outcome, expected score difference, expected board ownership, etc. The network is described in detail in Appendix A of the report. The code base switched from using TensorFlow to PyTorch in version 1.12. === Training === Let its trunk have b {\displaystyle b} residual blocks and c {\displaystyle c} channels. During its first training run, multiple networks were trained with increasing ( b , c ) {\displaystyle (b,c)} . It took 19 days using a maximum of 28 Nvidia V100 GPUs at 4.2 million games. After the first training run, training became a distributed project run by volunteers, with increasing network sizes. As of August 2024, it has reached b28c512 (28 blocks, 512 channels). == Adversarial attacks == In 2022, KataGo was used as the target for adversarial attack research, designed to demonstrate the "surprising failure modes" of AI systems. The researchers were able to trick KataGo into ending the game prematurely. Adversarial training improves defense against adversarial attacks, though not perfectly.

    Read more →
  • Norm (artificial intelligence)

    Norm (artificial intelligence)

    Norms can be considered from different perspectives in artificial intelligence to create computers and computer software that are capable of intelligent behaviour. In artificial intelligence and law, legal norms are considered in computational tools to automatically reason upon them. In multi-agent systems (MAS), a branch of artificial intelligence (AI), a norm is a guide for the common conduct of agents, thereby easing their decision-making, coordination and organization. Since most problems concerning regulation of the interaction of autonomous agents are linked to issues traditionally addressed by legal studies, and since law is the most pervasive and developed normative system, efforts to account for norms in artificial intelligence and law and in normative multi-agent systems often overlap. == Artificial intelligence and law == With the arrival of computer applications into the legal domain, and especially artificial intelligence applied to it, logic has been used as the major tool to formalize legal reasoning and has been developed in many directions, ranging from deontic logics to formal systems of argumentation. The knowledge base of legal reasoning systems usually includes legal norms (such as governmental regulations and contracts), and as a consequence, legal rules are the focus of knowledge representation and reasoning approaches to automatize and solve complex legal tasks. Legal norms are typically represented into a logic-based formalism, such as deontic logic. Artificial intelligence and law applications using an explicit representation of norms range from checking the compliance of business processes and the automatic execution of smart contracts to legal expert systems advising people on legal matters. == Multi-agent systems == Norms in multi-agent systems may appear with different degrees of explicitness ranging from fully unambiguous written prescriptions to implicit unwritten norms or tacit emerging patterns. Computer scientists’ studies mirror this polarity. Explicit norms are typically investigated in formal logics (e.g. deontic logics and argumentation) to represent and reason upon them, leading eventually to architecture for cognitive agents, while implicit norms are accounted as patterns emerging from repeated interactions amongst agents (typically reinforced learning agents). Explicit and implicit norms can be used together to coordinate agents. Explicit norms are typically represented as a deontic statement that aims at regulating the life of software agents and the interactions among them. It can be an obligation, a permission or a prohibition, and is often represented with some dialect or extension of Deontic logic. At the opposite, implicit norms are social norms that are not written, and they usually emerge from the repetitive interactions of agents.

    Read more →
  • UMBEL

    UMBEL

    UMBEL (Upper Mapping and Binding Exchange Layer) is a logically organized knowledge graph of 34,000 concepts and entity types that can be used in information science for relating information from disparate sources to one another. It was retired at the end of 2019. UMBEL was first released in July 2008. Version 1.00 was released in February 2011. Its current release is version 1.50. The grounding of this information occurs by common reference to the permanent URIs for the UMBEL concepts; the connections within the UMBEL upper ontology enable concepts from sources at different levels of abstraction or specificity to be logically related. Since UMBEL is an open-source extract of the OpenCyc knowledge base, it can also take advantage of the reasoning capabilities within Cyc. UMBEL has two means to promote the semantic interoperability of information:. It is: An ontology of about 35,000 reference concepts, designed to provide common mapping points for relating different ontologies or schema to one another, and A vocabulary for aiding that ontology mapping, including expressions of likelihood relationships distinct from exact identity or equivalence. This vocabulary is also designed for interoperable domain ontologies. UMBEL is written in the Semantic Web languages of SKOS and OWL 2. It is a class structure used in Linked Data, along with OpenCyc, YAGO, and the DBpedia ontology. Besides data integration, UMBEL has been used to aid concept search, concept definitions, query ranking, ontology integration, and ontology consistency checking. It has also been used to build large ontologies and for online question answering systems. Including OpenCyc, UMBEL has about 65,000 formal mappings to DBpedia, PROTON, GeoNames, and schema.org, and provides linkages to more than 2 million Wikipedia pages (English version). All of its reference concepts and mappings are organized under a hierarchy of 31 different "super types", which are mostly disjoint from one another. Each of these "super types" has its own typology of entity classes to provide flexible tie-ins for external content. 90% of UMBEL is contained in these entity classes.

    Read more →
  • Continuum robot

    Continuum robot

    A continuum robot is a type of robot that is characterised by infinite degrees of freedom and number of joints. These characteristics allow continuum manipulators to adjust and modify their shape at any point along their length, granting them the possibility to work in confined spaces and complex environments where standard rigid-link robots cannot operate. In particular, we can define a continuum robot as an actuatable structure whose constitutive material forms curves with continuous tangent vectors. This is a fundamental definition that allows to distinguish between continuum robots and snake-arm robots or hyper-redundant manipulators: the presence of rigid links and joints allows them to only approximately perform curves with continuous tangent vectors. The design of continuum robots is bioinspired, as the intent is to resemble biological trunks, snakes and tentacles. Several concepts of continuum robots have been commercialised and can be found in many different domains of application, ranging from the medical field to undersea exploration. == Classification == Continuum robots can be categorised according to two main criteria: structure and actuation. === Structure === The main characteristic of the design of continuum robots is the presence of a continuously curving core structure, named backbone, whose shape can be actuated. The backbone must also be compliant, meaning that the backbone yields smoothly to external loads. According to the design principles chosen for the continuum manipulator, we can distinguish between: single-backbone: these continuum manipulators have one central elastic backbone through which actuation/transmission elements can run. multi-backbone: the structure of these continuum robots has two or more elastic elements (either rods or tubes) parallel to each other and constrained with one another in some way. concentric-tube: the backbone is made of concentric tubes that are free to rotate and translate between each other, depending on the actuation happening at the base of the robot. === Actuation === The actuation strategy of continuum manipulators can be distinguished between extrinsic or intrinsic actuation, depending on where the actuation happens: extrinsic actuation: the actuation happens outside the main structure of the robot and the forces are transmitted via mechanical transmission; among these techniques, there are cable/tendon driven actuators and multi-backbone strategies. intrinsic actuation: the actuation mechanism operates within the structure of the robot; these strategies include pneumatic or hydraulic chambers and the shape memory effect. The Actuated Flexible Manifold (AFM), introduced by Medina, Shapiro, and Shvalb (2016), models flexible grid-based robots that approximate smooth manifolds using discrete segments, each contributing one degree of freedom. Their work provides forward and inverse kinematics for planar and spatial configurations, bridging hyper-redundant and continuum robotics. == Advantages == The particular design of continuum robots offers several advantages with respect to rigid-link robots. First of all, as already said, continuum robots can more easily operate in environments that require a high level of dexterity, adaptability and flexibility. Moreover, the simplicity of their structure makes continuum robots more prone to miniaturisation. The rise of continuum robots has also paved the way for the development of soft continuum manipulators. These continuum manipulators are made of highly compliant materials that are flexible and can adapt and deform according to the surrounding environment. The "softness" of their material grants higher safety in human-robot interactions. == Disadvantages == The particular design of continuum robots also introduces many challenges. To properly and safely use continuum robots, it is crucial to have an accurate force and shape sensing system. Traditionally, this is done using cameras that are not suitable for some of the applications of continuum robots (e.g. minimally invasive surgery), or using electromagnetic sensors that are however disturbed by the presence of magnetic objects in the environment. To solve this issue, in the last years fiber-Bragg-grating sensors have been proposed as a possible alternative and have shown promising results. It is also necessary to notice that while the mechanical properties of rigid-link robots are fully understood, the comprehension of the behaviour and properties of continuum robots is still subject of study and debate. This poses new challenges in developing accurate models and control algorithms for this kind of robots. == Modelling == Creating an accurate model that can predict the shape of a continuum robot allows to properly control the robot's shape. There are three main approaches to model continuum robots: Cosserat rod theory: this approach is an exact solution to the static of a continuum robot, as it is not subject to any assumption. It solves a set of equilibrium equations between position, orientation, internal force and torque of the robot. This method requires to be solved numerically and it is therefore computationally expensive, due to its high complexity. Constant curvature: this technique assumes the backbone to be made of a series of mutually tangent sections that can be approximated as arcs with constant curvature. This approach is also known as piecewise constant-curvature. This assumption can be applied to the entire segment of the backbone or to its subsegments. This model has shown promising results, however it must be taken into account that the segment/subsegments of the backbone may not comply to the constant curvature assumption and therefore the model's behaviour may not entirely reflect the behaviour of the robot. Rigid-link model: this approach is based on the assumption that the continuum robot can be divided in small segments with rigid links. This is a strong assumption, since if the number of segments is too low, the model hardly behaves like the continuum robot, while increasing the number of segments means increasing the number of variables, and thus complexity. Despite this limitation, rigid-link modelling allows the use of the standard control techniques that are well known for rigid-link robots. It has been proven that this model can be coupled with shape and force sensing to mitigate its inaccuracy and can lead to promising results. == Sensing == To develop accurate control algorithms, it is necessary to complement the presented modelling techniques with real time shape sensing. The following options are currently available: Electromagnetic (EM) sensing: shape is reconstructed thanks to the mutual induction between a magnetic field generator and a magnetic field sensor. The most common external EM tracking system is the commercially available NDI Aurora: small sensors can be placed on the robot and their position is tracked in an external generated magnetic field. The validity of this method has been extensively assessed, however its performance is hindered by the limited workspace, whose dimension depends on the magnetic field. Another alternative is to embed the sensors internally in the continuum robot, combining magnetic sensors with Hall effect sensors: the magnetic field is measured at the level of the Hall effect sensors in order to estimate the deflection of the robot. However, it has been noticed that the higher the bending of the manipulator, the higher is the estimation error, due to crosstalk between sensors and magnets. Optical sensing: fiber Bragg grating sensors incorporated in an optical fiber can be embedded into the backbone of the continuum robot to estimate its shape; these sensors can only reflect a small range of the input light spectrum depending on their strain; therefore, by measuring the strain on each sensor it is possible to obtain the shape of the robot. This type of sensor is however expensive and is more prone to breaking in case of excessive strain, and this can happen in robots that can perform high deflections. == Control strategies == The control strategies can be distinguished in static and dynamic; the first one is based on the steady-state assumption, while the latter also considers the dynamic behaviour of the continuum robot. We can also differentiate between model-based controllers, that depend on a model of the robot, and model-free, that learn the robot's behaviour from data. Model-based static controllers: they rely on one of the modelling approaches presented above; once the model is defined, the kinematics must be inverted to obtain the desired actuator or configuration space variables. There are several ways to do this, like differential inverse kinematics, direct inversion or optimization. Model-free static controllers: these approaches learn directly, via machine learning techniques (e.g. regression methods and neural networks), the inverse kinematic or the direct kinematic representation of the con

    Read more →
  • Luciano Floridi

    Luciano Floridi

    Luciano Floridi (Italian: [luˈtʃaːno ˈflɔːridi]; born 16 November 1964) is an Italian and British philosopher. He is John K. Castle Professor in the Practice of Cognitive Science and Founding Director of the Digital Ethics Center at Yale University. He is also a Professor of Sociology of Culture and Communication at the University of Bologna, Department of Legal Studies, where he is the director of the Centre for Digital Ethics. Furthermore, he is adjunct professor ("distinguished scholar in residence") at the Department of Economics, American University, Washington D.C. He is married to the neuroscientist Anna Christina Nobre. Floridi is best known for his work on two areas of philosophical research: the philosophy of information, and information ethics (also known as digital ethics or computer ethics), for which he received many awards, including the Knight of the Grand Cross of the Order of Merit, Italy's most prestigious honor. According to Scopus, Floridi was the most cited living philosopher in the world in 2020. Between 2008 and 2013, he held the research chair in philosophy of information and the UNESCO Chair in Information and Computer Ethics at the University of Hertfordshire. He was the founder and director of the IEG, an interdepartmental research group on the philosophy of information at the University of Oxford, and of the GPI the research Group in Philosophy of Information at the University of Hertfordshire. He was the founder and director of the SWIF, the Italian e-journal of philosophy (1995–2008). He is a former Governing Body Fellow of St Cross College, Oxford. == Early life and education == Floridi was born in Rome in 1964, and studied at Rome University La Sapienza (laurea, first class with distinction, 1988), where he was originally educated as a historian of philosophy. He soon became interested in analytic philosophy and wrote his tesi di laurea (roughly equivalent to an M.A. thesis) in philosophy of logic, on Michael Dummett's anti-realism. He obtained his Master of Philosophy (1989) and PhD degree (1990) from the University of Warwick, working in epistemology and philosophy of logic with Susan Haack (who was his PhD supervisor) and Michael Dummett. Floridi's early student years are partly recounted in the non-fiction book The Lost Painting: The Quest for a Caravaggio Masterpiece, where he is "Luciano". During his graduate and postdoctoral years, he covered the standard topics in analytic philosophy in search of a new methodology. He sought to approach contemporary problems from a heuristically powerful and intellectually enriching perspective when dealing with lively philosophical issues. During his graduate studies, he began to distance himself from classical analytic philosophy. In his view, the analytic movement had lost its way. For this reason, he worked on pragmatism (especially Peirce) and foundationalist issues in epistemology and philosophy of logic, as well as the history of skepticism. == Academic career and previous positions == Floridi started his academic career as a lecturer in philosophy at the University of Warwick in 1990–1991. He joined the Faculty of Philosophy of the University of Oxford in 1990 and the OUCL (Oxford's Department of Computer Science) in 1999. He was junior research fellow (JRF) in philosophy at Wolfson College, Oxford University (1990–1994), a Frances Yates Fellow in the History of Ideas at the Warburg Institute, University of London (1994–1995) and Research Fellow in philosophy at Wolfson College, Oxford University (1994–2001). During these years in Oxford, he held lectureships in different Colleges. Between 1994 and 1996, he also held a post-doctoral research scholarship at the Department of Philosophy, University of Turin. Between 2001 and 2006, he was Markle Foundation Senior Research Fellow in Information Policy at the Programme in Comparative Media Law and Policy, Oxford University. Between 2002 and 2008, he was associate professor of logic at the Università degli Studi di Bari. In 2006, he became Fellow by Special Election of St Cross College, Oxford University, where he played for the squash team. In 2008, he was appointed full professor of philosophy at the University of Hertfordshire, to hold the newly established research chair in philosophy of information and, in 2009, the UNESCO Chair in Information and Computer Ethics, a position which he held until 2013, when he moved back to Oxford. In 2017, Floridi became a fellow of the Alan Turing Institute and the chair of its Data Ethics Group, holding these positions until 2021 and 2020, respectively. Since 2010 he has been editor-in-chief of Philosophy & Technology (Springer). In January 2023, Floridi announced he would move to Yale at the beginning of the academic year 2023–2024, to take over the position of founding director of the Yale Digital Ethics Center. == Philosophical views == One of Floridi's key contributions is his formulation of the 'Philosophy of Information' (PoI). The PoI provides a framework for understanding the nature of information and its role in the world. According to Floridi, information is a vital resource that shapes our knowledge and understanding of the world. It is not simply a neutral representation of reality but a part of the world, with its own properties, effects, and moral implications. Floridi's PoI has several key components including an 'ontology of information', which defines the nature of information, an 'ethics of information', which provides a framework for evaluating the moral implications of information and information technologies, an 'epistemology of information', that analyses the role of information in the development of knowledge and science, and a 'logic of information', the concentrates on the more formal aspects. The PoI also includes a theory of the 'information environment', the infosphere, which encompasses the physical, social, and cultural contexts in which information is produced, used, and communicated. == Recognitions and awards == 2022 - Knight of the Grand Cross - First Class of the Order of Merit (Cavaliere di Gran Croce Ordine al Merito della Repubblica Italiana, the highest honor in the Italian Republic), awarded through a special decree by the president of the Italian Republic Sergio Mattarella for his work on the philosophy and ethics of information. 2022 - Fellow of the Accademia delle Scienze dell'Istituto di Bologna 2021 - Honorary Doctorate (Laurea honoris causa) in Informatics, University of Skövde, Sweden, for "his groundbreaking work on the philosophy of information". 2020 - Premio Udine Filosofia, Mimesis Festival, for The Logic of Information (OUP, 2019) 2020 - Premio Socrate, Cesare Landa Foundation, for philosophical communication 2019 - CogX Award, for "outstanding achievement in ethics of AI" 2019 - Gilbert Ryle Lectures, Trent University 2019 - Premio Aretè "Maestro della Responsabilità", Nuvolaverde, Confindustria, Gruppo 24 Ore Salone della CSR e dell'innovazione sociale, for ethics of communication 2018 - Thinker Award, IBM, for AI Ethics 2018 - Premio Conoscenza, Conferenza dei Rettori delle Università Italiane (CRUI, equivalent of Universities UK), for achievements in research and communication about digital ethics 2017 - Fellow of the Academy of Social Sciences 2016 - J. Ong Award, Media Ecology Association, for The Fourth Revolution (OUP, 2016) 2016 - Copernicus Scientist Award, Institute for Advanced Studies of the University of Ferrara, in recognition of research in the ethics and philosophy of information 2015 - Fernand Braudel Senior Fellow, European University Institute 2014-15 - Cátedras de Excelencia, University Carlos III of Madrid, for research in philosophy and ethics of information 2013 - Member of the Académie Internationale de Philosophie des Sciences 2013 - Fellow of the British Computer Society 2013 - Weizenbaum Award, International Society for Ethics and Information Technology, for "very significant contribution to the field of information and computer ethics, through his research, service, and vision" 2012 - Covey Award, International Association for Computing and Philosophy, for "outstanding research in computing and philosophy" 2011-12 - Fellow, Center for Information Policy Research, University of Wisconsin–Milwaukee 2011 - Honorary Doctorate (Laurea honoris causa) in philosophy, University of Suceava, Romania, for "his leading research in the philosophy and ethics of information" 2011 - Fellow, World Technology Network, NY, in the category "ethics and technology" 2010 - Vice Chancellor Research Award, University of Hertfordshire 2009 - Fellow of the Society for the Study of Artificial Intelligence and the Simulation of Behaviour (AIBS) 2009-10 - Gauss Professor of the Akademie der Wissenschaften, Göttingen, in recognition of research in the philosophy of information (first philosopher to receive the award, generally given to mathematicians or physicists) 2009 - Barwise Prize, American Philosophical Asso

    Read more →
  • Meta Content Framework

    Meta Content Framework

    Meta Content Framework (MCF) is a specification of a content format for structuring metadata about web sites and other data. == History == MCF was developed by Ramanathan V. Guha at Apple Computer's Advanced Technology Group between 1995 and 1997. Rooted in knowledge-representation systems such as CycL, KRL, and KIF, it sought to describe objects, their attributes, and the relationships between them. One application of MCF was HotSauce, also developed by Guha while at Apple. It generated a 3D visualization of a web site's table of contents, based on MCF descriptions. By late 1996, a few hundred sites were creating MCF files and Apple HotSauce allowed users to browse these MCF representations in 3D. When the research project was discontinued, Guha left Apple for Netscape, where, in collaboration with Tim Bray, he adapted MCF to use XML and created the first version of the Resource Description Framework (RDF). == MCF format == An MCF file consists of one or more blocks, each corresponding to an entity. A block looks like this:The identifier is a unique identifier for that entity (more on the scope of the identifier below) and is used to refer to that entity. The following lines each specify a property and one or more values, separated by commas. Each value can be a reference to another entity (via its identifier), a string (enclosed by double quotes) or a number. For example:NOTE: The identifier must not include a comma (,) and must not be enclosed within double quotes. A common parsing failure is due to odd number of unescaped double quotes in text. For instance, "foo bar" baz" needs to be "foo bar\" baz". Commas within double quotes are not considered as value separators. Every entity has at least one property: typeOf.

    Read more →
  • Jensen Huang

    Jensen Huang

    Jen-Hsun "Jensen" Huang (Chinese: 黃仁勳; Wade–Giles: Huáng Jén-hsūn; Tâi-lô: N̂g Jîn-hun; born February 17, 1963) is a Taiwanese and American business executive and electrical engineer who is the founder, president, and CEO of Nvidia, the world's most valuable company. As of 2026, Forbes estimates his net worth at over US$200 billion, making him the seventh-wealthiest individual in the world. The son of Taiwanese immigrants, Huang spent his childhood in Taiwan and Thailand before moving to the United States, where he was a student in Kentucky and Oregon. After earning a master's degree from Stanford University, Huang launched Nvidia in 1993 from a Denny's restaurant in San Jose, California, at age 30 and has remained its president and CEO ever since. He led the company out of near-bankruptcy during the 1990s and oversaw its expansion into GPU production, high-performance computing, and artificial intelligence (AI). Under Huang, Nvidia experienced rapid growth during the AI boom, becoming the first company to reach a market capitalization of over $5 trillion in October 2025. In 2021 and 2024, Time magazine included Huang in their list of the most influential people. In 2025, he was named as one of the "Architects of AI" for Time's Person of the Year. == Early life and education == Huang was born in Taipei, Taiwan, on February 17, 1963, and moved to the southern city of Tainan as a child. He is the younger of two sons of Huang Hsing-tai, a chemical engineer at an oil refinery, and Lo Tsai-hsiu, a schoolteacher. They were a middle-class Taiwanese family that relocated often, and were native speakers of Taiwanese Hokkien. Each day, Jensen's mother randomly selected 10 words from the dictionary to teach her sons English. When he was five years old, Huang's family moved to Thailand to support his father's refinery career and remained there for approximately four years. He attended Ruamrudee International School while in Bangkok. In the late 1960s, Hsing-tai traveled from Taiwan to New York City to train under an air conditioning company and, after returning home, resolved to send his sons to the United States. At age nine, Jensen, despite not yet being able to speak English fluently, was sent by his parents to live in the United States. He and his older brother moved in 1973 to live with an uncle in Tacoma, Washington, escaping widespread social unrest in Thailand. Both Huang's aunt and uncle were recent immigrants to Washington state; they accidentally enrolled him and his brother in the Oneida Baptist Institute, a religious reform academy in Kentucky for troubled youth, mistakenly believing it to be a prestigious boarding school. In order to afford the academy's tuition, Jensen's parents sold nearly all their possessions. When he was 10 years old, Huang lived with his older brother in the Oneida boys' dormitory. Each student was expected to work every day, and his brother was assigned to perform manual labor on a nearby tobacco farm. Because he was too young to attend classes at the reform academy, Huang was educated at a separate public school—the Oneida Elementary school in Oneida, Kentucky—arriving as "an undersized Asian immigrant with long hair and heavily accented English" and was frequently bullied and beaten. In Oneida, Huang cleaned toilets every day, learned to play table-tennis, joined the swimming team, and appeared in Sports Illustrated at age 14. He taught his illiterate roommate, a "17-year-old covered in tattoos and knife scars," how to read in exchange for being taught how to bench press. In 2002, Huang said he remembered his life in Kentucky "more vividly than just about any other". Two years after Huang arrived in Oneida, his parents moved to the United States and settled in Beaverton, Oregon, after which the brothers withdrew from school in Kentucky to live back with them. As a teenager, Huang attended Aloha High School in Aloha, Oregon, where he excelled academically. He skipped two grades, graduated at age 16, and became a nationally ranked table-tennis player in addition to being a member of its mathematics, computer, and science clubs. In 1977, the school purchased an Apple II computer. Huang used the machine to play Super Star Trek, a text-based game, and to program in BASIC, creating his own version of Snake. Beginning at age 15, Huang got his first job working the graveyard shift at a local Denny's restaurant as a dishwasher, busboy, and waiter from 1978 to 1983. After high school, he chose to enroll at Oregon State University due to its low in-state tuition. He studied electrical engineering and graduated in 1984 with a bachelor's degree with highest honors. Huang later recalled, "I was the youngest kid in school, in class" and the only student who "looked like a child". Years later, while working as a microchip designer in Silicon Valley, he concurrently pursued graduate night classes at Stanford University, where he earned a master's degree in electrical engineering in 1992. == AMD and LSI Logic == After graduating from college, Huang was a microchip designer in Silicon Valley. He was recruited for positions at Texas Instruments, Advanced Micro Devices (AMD), and LSI Logic, ultimately choosing the California-based AMD due to already being familiar with the company. Huang designed AMD microprocessors while simultaneously attending Stanford and raising his two children. However, when he heard of new chip design processes at LSI Logic, Huang left AMD to assume a role as a technical officer at the LSI Corporation, working under a startup company, Sun Microsystems, where he met engineers Chris Malachowsky and Curtis Priem. LSI was in contract with Sun Microsystems and had introduced Huang to Malachowsky and Priem, who were working on a new graphics accelerator card. While the three produced the card's manufacturing process, the relationship between Malachowsky and Priem became strained as the two disputed the chip's design, leading to infighting; according to Malachowsky, they "broke every tool that LSI Logic had in their standard portfolio". In 1989, Huang, Malachowsky, and Priem finalized the accelerator, which they called the "GX graphics engine". GX was a widespread financial success; the sales of the graphics engine contributed to Sun Microsystem's revenue increasing from $262 million in 1987 to $656 million in 1990, and Huang was promoted to be the director of LSI's CoreWare, a division that manufactured chips for hardware vendors. == Nvidia == === Founding (1993) === When business began to slow for Sun Microsystems after 1990, Huang, along with Priem and Malachowsky, each resigned their jobs to pursue a venture together in making graphics chips for PC games. They initially named their new company "NVision" until Huang suggested that the company be named "Nvidia" based on the Latin word invidia, as Priem wanted competitors to turn "green with envy". They eventually dropped the "i" to honor the NV1 chip that they were then developing. The three met frequently in 1992 at a Denny's roadside diner in East San Jose to formulate a business plan. Huang chose for them to meet at Denny's due to his prior work experience at the restaurant chain and because it was "quieter than home and had cheap coffee". The three founded the company during one meeting at a breakfast booth at the diner. To formally incorporate the company, Huang found a lawyer, James Gaither of Cooley Godward, who demanded the $200 in cash in Huang's pockets to capitalize the company. After that meeting, Huang went back to Priem and Malachowsky to ask each of them for $200 for their respective shares of the company, which meant that Nvidia's initial capital was $600. On April 5, 1993, Huang personally signed Nvidia's original articles of incorporation into effect. Although he left LSI, Huang remained in good standing with the company and was able to secure funding for Nvidia from LSI's CEO, Wilfred Corrigan, who introduced Huang to venture capitalist Don Valentine. An account cited how Huang's presentation pitch went badly. Valentine, the leader of Sequoia Capital, chose to invest in Nvidia through Corrigan's support, as did Sutter Hill Ventures. The funding enabled Nvidia to begin development efforts toward its first chip and to begin paying wages for its employees. By the first day of operation, Huang was made Nvidia's president and CEO. Even though Huang, at age 30, was younger than Priem and Malachowsky, both Priem and Malachowsky believed that he was prepared to be CEO. According to Priem, "we basically deferred to Jensen on day one" and told Huang, "you're in charge of running the company—all the stuff Chris and I don't know how to do". === President and CEO (1993–present) === As of 2024, Huang has been Nvidia's chief executive for over three decades, a tenure described by The Wall Street Journal as "almost unheard of in fast-moving Silicon Valley". He owns 3.6% of Nvidia's stock, which went public in 1999. He earned US$24.6 million as CEO i

    Read more →
  • Reverse correlation technique

    Reverse correlation technique

    The reverse correlation technique is a data driven study method used primarily in psychological and neurophysiological research. This method earned its name from its origins in neurophysiology, where cross-correlations between white noise stimuli and sparsely occurring neuronal spikes could be computed quicker when only computing it for segments preceding the spikes. The term has since been adopted in psychological experiments that usually do not analyze the temporal dimension, but also present noise to human participants. In contrast to the original meaning, the term is here thought to reflect that the standard psychological practice of presenting stimuli of defined categories to the participants is "reversed": Instead, the participant's mental representations of categories are estimated from interactions of the presented noise and the behavioral responses. It is used to create composite pictures of individual and/or group mental representations of various items (e.g. faces, bodies, and the self) that depict characteristics of said items (e.g. trustworthiness and self-body image). This technique is helpful when evaluating the mental representations of those with and without mental illnesses. == Terms == This technique utilizes spike-triggered average to explain what areas of signal and noise in an image are valuable for the given research question. Signal is information used to produce objects of value that help explain and connect the world around us. Noise is commonly referred to as unwanted signal that obscures the information that the signal is trying to present. Most importantly for reverse correlation studies, noise is randomly varying information. To determine the areas of importance using reverse correlation, noise is applied to a base image and then evaluated by observers. A base image is any image void of noise that relates to the research question. A base image that has noise superimposed on top is the stimuli that is presented to and evaluated by participants. Each time a new set of stimuli is presented to a participant, this is known as a trial. After a participant has responded to hundreds to thousands of trials, a researcher is ready to create a classification image. A classification image (abbreviated as "CI" in some studies) is a single image that represents the average noise patterns in the images selected by participants. A classification image can also be computed for groups by averaging the individuals’ classification images. These classification images are what researchers use to interpret the data and draw conclusions. As a whole, the reverse correlation method is a process that results in a composite image (from an individual or group) that can be used to estimate and interpret mental representations. == Basic study layout == The reverse correlation method is typically executed as an in-lab computer experiment. This method follows four broad steps. Each of the following steps are described in greater detail below. After creating a research question and determining that the reverse correlation method is the most suitable technique to answer the question, a researcher must (1) design randomly varying stimuli. After the stimuli have been prepared, a researcher should (2) collect data from participants who will see and respond to approximately 300 -1,000 trials. Each trial will either consist of one or two images (side by side) derived from the same base image with noise superimposed on top. Participant responses will depend on the chosen study design; if a researcher presents only one image at a time, participants rate the image on a 4pt scale, but when two images are shown, the participant is asked to choose which best aligns with the given category (e.g. choose the image that looks the most aggressive). Once all of the data is collected, the researcher will (3) compute classification images for each participant and using those images compute group classification images. Finally, with the classification images available, the researcher will (4) evaluate the images and draw conclusions about their results. === Step 1: making stimuli === When designing the stimuli for a reverse correlation study, the two primary factors that one should consider are (1) the base image and (2) the noise that will be used. While not all bases are images per se, the majority are and for this reason the base is typically referred to as a base image. The base image should represent whatever the research question is addressing. For example, if you are interested in peoples’ mental representations of Chinese people, it would not make sense to use a base image of a Spanish or Caucasian person. Again, if you are interested in the mental representations of male vocal patterns, it would make the most sense to use a base vocal pattern that has been produced by a male. Having a base is important because it provides a kind of anchor for participants to work from. When there is no base image, the number of trials that are required increases dramatically, thus making it harder to collect data. While there are studies that have excluded a base image, (e.g. the S study), for more elaborate and nuanced research questions, it is important to have a base image that is a fair representation of what participants are being asked to categorize. Photographs of faces are generally the most popular base image. Although the reverse correlation method is capable of investigating a wide variety of research questions, the most common application of the method is for evaluating faces on a single trait. Reverse correlation studies that address evaluations of the face are sometimes referred to as being a face space reverse correlation model (FSRCM). Thankfully, there are existing databases for face images of varying demographics and emotion that work well as base images. The reverse correlation method can also be used to help researchers identify what areas of an image (e.g. the areas on the face) have diagnostic value. In order to identify these areas of value, researchers start by minimizing the space a participant can pull information from. By imposing a “mask” on an image (e.g. blur an image while leaving random areas un-blurred), this reduces the information individuals might see, and forces them to focus on certain areas. Then, if/when participants are able to correctly identify an image with a trait repeatedly, we can draw conclusions about what areas have diagnostic value. While faces and visual stimuli are the most popular, this is not the only stimuli that can be used in a reverse correlation study. This method was originally designed for auditory stimuli which allows researchers to investigate how perceivers interpret auditory information and create trait based attributions to different sound patterns. For example, by segmenting a vocal recording of a single word (total sound time 426 ms) into six segments (71 ms each), and varying each segment's pitch using Gaussian distributions, researchers were able to uncover what vocal patterns people associated with certain traits. Specifically, this study investigated how listeners rated sound clips of the word “really” as sounding more interrogative (i.e. like the more common reverse correlation studies this study had participants listen to two sound clips per trial, choose which fit the category the best, and then created an average of the pitch contours). Beyond face and auditory perception, research utilizing the reverse correlation method has expanded to investigate how individuals see three-dimensional objects in images with noise (but no signal). After selecting your base image, regardless of what the image is, it is helpful to apply a Gaussian blur to smooth noise in the image. While noise will be applied later, it is helpful to reduce existing noise in the photo before applying your chosen noise. There are three primary choices when it comes to noise: white noise, sine-wave noise, and Gabor noise. The latter two of these constrain the configurations that the noise can have, and because of this white noise is usually the most commonly used. Regardless of the type of noise that is chosen, it is crucial that the noise randomly varies. === Step 2: data collection === Once the stimuli for the study has been developed, the researcher must make a few decisions before actually collecting the data. The researcher must come to a conclusion on how many stimuli will be presented at a time and how many trials the participants will see. In terms of stimuli presentation, a researcher can choose from either a 2-Image Forced Choice (2IFC) or a 4-Alternative Forced Choice (4AFC). The 2IFC presents two images at once (side by side) and requires participants to choose between the two on a specified category (e.g. which image looks the most like a male). Typically the noise from the left image is the mathematical inverse of the noise from the right image. This method was developed to better answer questions that could n

    Read more →
  • Unified Modeling Language

    Unified Modeling Language

    The Unified Modeling Language (UML) is a general-purpose, object-oriented, visual modeling language that provides a way to visualize the architecture and design of a system, similar to the function of a blueprint. UML defines notation for many types of diagrams which focus on aspects such as behavior, interaction, and structure. UML is both a formal metamodel and a collection of graphical templates. The metamodel defines the elements in an object-oriented model such as classes and properties. It is essentially the same thing as the metamodel in object-oriented programming (OOP), however for OOP, the metamodel is primarily used at run time to dynamically inspect and modify an application object model. The UML metamodel provides a mathematical, formal foundation for the graphic views used in the modeling language to describe an emerging system. UML was created in an attempt to define a standard language for object-oriented programming at the OOPSLA '95 Conference. Originally, Grady Booch and James Rumbaugh merged their models into a unified model. This was followed by Booch's company Rational Software purchasing Ivar Jacobson's Objectory company and merging their model into the UML. At the time Rational and Objectory were two of the dominant players in the small world of independent vendors of object-oriented tools and methods. The Object Management Group (OMG) then took ownership of UML. The creation of UML was motivated by the desire to standardize the disparate nature of notational systems and approaches to software design at the time. In 1997, UML was adopted as a standard by the Object Management Group (OMG) and has been managed by this organization ever since. In 2005, UML was also published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) as the ISO/IEC 19501 standard. Since then the standard has been periodically revised to cover the latest revision of UML. Most developers do not use UML per se, but instead produce more informal diagrams, often hand-drawn. These diagrams, however, often include elements from UML. == Use == UML is primarily used for software development (in any industry or domain) but also used outside elsewhere including business processes, system functions, database schemas, workflow in the legal systems, medical electronics, Health care systems, and hardware design.. The UML is used by the OMG itself to define other OMG products such as the Unified Architecture Framework (UAF) and the Systems Modelling Language (SysML) v1. UML is designed for use with many object-oriented software development methods, both today and for the methods when it was first developed – including OMT, Booch method, Objectory, and especially RUP, which it was originally intended to be used with when work began at Rational Software. Although originally intended for object-oriented design documentation, UML has been used effectively in other contexts such as modeling business process. As UML is not inherently linked to a particular programming language, it can be used for modeling a system independent of language. Some UML tools generate source code from a UML model. === Elements === UML diagrams support visualizing system aspects like: Use case diagram for specifying user interactions with systems Class diagram for specifying structures, including data structures Activity diagram for specifying business process workflows Component diagram for specifying how components interface with other components Deployment diagram for specifying how components are deployed and executed on computational nodes In addition to syntactical (notational) elements with well-defined semantics, UML diagrams also allow for free-form comments (notes) that explain aspects such as usage, constraints, and intents. === Sharing === UML models can be exchanged among UML tools via the XML Metadata Interchange (XMI) format. === Cardinality notation === As with database Chen, Bachman, and ISO ER diagrams, class models are specified to use "look-across" cardinalities, even though several authors (Merise, Elmasri & Navathe, amongst others) prefer same-side or "look-here" for roles and both minimum and maximum cardinalities. Recent researchers (Feinerer and Dullea et al.) have shown that the "look-across" technique used by UML and ER diagrams is less effective and less coherent when applied to n-ary relationships of order strictly greater than 2. Feinerer says: "Problems arise if we operate under the look-across semantics as used for UML associations. Hartmann investigates this situation and shows how and why different transformations fail.", and: "As we will see on the next few pages, the look-across interpretation introduces several difficulties which prevent the extension of simple mechanisms from binary to n-ary associations." === Artifacts === An artifact is the "specification of a physical piece of information that is used or produced by a software development process, or by deployment and operation of a system" including models, source code, scripts, executables, tables in database systems, development deliverables, a design documents, and email messages. An artifact is the physical entity that is deployed to a node. Other UML elements such as classes and components are first manifest into artifacts and instances of these artifacts are then deployed. Artifacts can be composed of other artifacts. === Metamodeling === The OMG developed a metamodeling architecture to define UML, called the Meta-Object Facility (MOF). MOF is designed as a four-layered architecture, as shown in the image at right. It provides a meta-meta model at the top, called the M3 layer. This M3-model is the language used by Meta-Object Facility to build metamodels, called M2-models. The most prominent example of a Layer 2 Meta-Object Facility model is the UML metamodel, which describes UML itself. These M2-models describe elements of the M1-layer, and thus M1-models. These would be, for example, models written in UML. The last layer is the M0-layer or data layer. It is used to describe runtime instances of the system. The metamodel can be extended using a mechanism called stereotyping. This has been criticized as being insufficient/untenable by Brian Henderson-Sellers and Cesar Gonzalez-Perez in "Uses and Abuses of the Stereotype Mechanism in UML 1.x and 2.0". == Diagrams == UML 2 defines many types of diagrams – shown as a taxonomy in the image. === Structure diagrams === Structure diagrams emphasize the structure of the system – using objects, classifiers, relationships, attributes and operations. They are used to document software architecture. Class diagram – Describes the structure of a class Component diagram – Describes how a software system is split into components and dependencies between the components Composite structure diagram Deployment diagram Object diagram Package diagram Profile diagram === Behavior diagrams === Behavior diagrams emphasize the behavior of a system by showing collaborations among objects and changes to the internal states of objects. They are used to describe the functionality of a system. Activity diagram – Describes the business and operational activities of components State machine diagram Use case diagram – Depicts of a user's interaction with a system === Interaction diagrams === Interaction diagrams, a subset of behavior diagrams, emphasize the flow of control and data between components of a system. Communication diagram – shows communication between components Interaction overview diagram Sequence diagram – shows interactions arranged in time sequence; can be drawn via tools such as Lucidchart and Draw.io Timing diagram – focuses on timing constraints === Examples === == Adoption == In 2013, UML had been marketed by OMG for many contexts, but aimed primarily at software development with limited success. It has been treated, at times, as a design silver bullet, which leads to problems. UML misuse includes overuse (designing every part of the system with it, which is unnecessary) and assuming that novices can design with it. It is considered a large language, with many constructs. Some people (including Jacobson) feel that UML's size hinders learning and therefore uptake. Visual Studio removed support for UML in 2016 due to lack of use. == History == UML has evolved since the second half of the 1990s and has its roots in the object-oriented programming methods developed in the late 1980s and early 1990s. The image shows a timeline of the history of UML and other object-oriented modeling methods and notation. === Origin === Rational Software hired James Rumbaugh from General Electric in 1994 and after that, the company became the source for two of the most popular object-oriented modeling approaches of the day: Rumbaugh's object-modeling technique (OMT) and Grady Booch's method. They were soon assisted in their efforts by Ivar Jacobson, the creator of the object-oriented software engineeri

    Read more →
  • Social History and Industrial Classification

    Social History and Industrial Classification

    Social History and Industrial Classification (SHIC) is a classification system used by many British museums for social history and industrial collections. It was first published in 1983. == Purpose == SHIC classifies materials (books, objects, recordings etc.) by their interaction with the people who used them. For example, a carpenter's hammer is classified with other tools of the carpenter, and not with a blacksmith's hammer. In contrast other classification systems, for example the Dewey Decimal Classification, might class all hammers together and close to the classification for other percussive tools. The specialist subject network, Social History Curator's Group (SHCG), obtained funding in 2012 to develop an on-line version, now on their website http://www.shcg.org.uk/ == Scheme == Materials are classified under four major category numbers: Community life Domestic and family life Personal life Working life Further classification within a category is by the use of further numbers after the decimal point. It is permissible to assign more than one classification in cases where the object had more than one use.

    Read more →