AI For Business Edinburgh

AI For Business Edinburgh — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

MyRadar

MyRadar is a free weather forecasting application developed by Andy Green and his Orlando, Florida-based company ACME AtronOmatic (ACME). The app began operations in 2008 and ran on government-provided weather and radar data for its first decade. In 2019, ACME launched personal satellites to improve predictions of ongoing weather. The app received funding to improve its radar and imaging from the Federal Communications Commission (FCC), National Oceanic and Atmospheric Administration (NOAA), and the Office of Naval Research (ONR). ACME created a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), which utilizes machine learning and artificial intelligence (AI) to create a current weather map. With the introduction of additional features, including the detection of wildfires and illegal fishing, the app has more broadly become an environmental intelligence app since 2022. In 2024, the app partnered with the Total Traffic and Weather Network (TTWN) to provide traffic flow and incident data for users with paying subscriptions via CarPlay and Android Auto. == History == The app's creator, Andy Green, had created internet tech since the 1980s. His first major project was the development of a public access internet service company based in Rhode Island, which he later sold to finance the creation of ACME AtronOmatic ("ACME" for short), based in Orlando, Florida. The first major app created by ACME was called "Flightwise", which provided users with flight tracking information. In summer 2008, Green had the idea to use the animated location tracker already built-in to Flightwise to make a stand-alone weather forecasting app after wondering if a meal he was eating outdoors would get rained out. MyRadar was launched in 2012 out of an office in Orlando. Despite running solely off of free government-provided weather and radar data for the first decade after launch, Green said the app "took off like wildfire" in downloads. In December 2017, the app partnered with "TripIt" to provide users with information about flight delays and gate changes, eliminating the need for a separate app like Flightwise. In 2019, ACME launched their first personal satellite for the app, a small prototype from New Zealand, as part of an effort to provide detailed imagery and improved predictions of ongoing weather unique to the app. More satellites were eventually launched by ACME to create a weather data satellite constellation named "Hyperspectral Orbital Remote Imaging Spectrometer" (HORIS), monitored by ground stations maintained by Kongsberg Satellite Services. HORIS operates MyRadar by taking the environmental data and imagery it collects and pairing it with machine learning and artificial intelligence (AI) to create a real-time weather map. In 2022, HORIS was expanded upon after ACME won approval from the Federal Communications Commission (FCC) to improve their satellite constellation to include 250 satellites or more. The main batch of satellites were PocketQubes, which entered the atmosphere on May 2, 2022, by Rocket Lab Electron launched from New Zealand, with the additional purpose to test and validate the existing satellites in orbit. In October 2022, ACME received a US$150,000 Small Business Innovation Research (SBIR) grant from the National Oceanic and Atmospheric Administration (NOAA) to improve the app's wildfire detection and air quality measurement technology to better detect smoke, aerosols, fire hotspots using satellites and aerial drones. On August 18, 2023, phase two of the NOAA grant was approved, providing an additional US$650,000 to aid in the app's aforementioned goals by launching a pair of CubeSat satellites to provide high-definition infrared imagery. On September 8, 2023, ACME secured another US$1,200,000 in crowd funding to aid accomplishing the goals of the NOAA grant by expanding the app's workforce from 35 to 100 employees by the end of 2024. In January 2024, MyRadar partnered with Total Traffic and Weather Network (TTWN) to provide traffic data overlaid with its pre-existing weather graphics for users in the United States. The partnership allowed for the app to additionally become a tool for navigation. This officially became a feature days later on January 8, 2024, when the app was made compatible with Apple's CarPlay. On February 7, 2024, the Android equivalent Android Auto also gained the ability to display the app on car interfaces. In March 2024, the app launched a "meteorological wedding planning service" in the United States and Canada for prices between US$1,000 and US$5,000, in which users can request a personal meteorologist to provide an in-person meeting about the best dates for a wedding, and on-call local weather updates the day of. Scheduled for February 2025, four more satellites to help with the NOAA-sponsored wildfire detection are to be launched, and the first by ACME to have AI processing in the satellites themself and not computers on the ground, allowing for quicker transfer of information. == Features and general information == The app's primary function is to provide weather forecasting and prediction to users. The app includes toggleable options to track and send alerts to users for rain, wind patterns, earthquakes, tornadoes, tropical cyclones, wildfires, and more. In early 2020, a feature was added to track orbital objects such as the International Space Station. In May 2022, with the imagery improvement of HORIS, the app gained the secondary abilities to better monitor algae blooms, coral reefs, illegal fishing, and wildfires. In January and February 2024, the ability to display traffic flow and incident data in a feature called "RouteCast" was added, and can be displayed in video and 3D options via CarPlay and Android Auto for users with paying subscriptions. The app also provides annual tropical storm and tornado outlooks for their respective seasons, gathered through satellite and aerial drone data, as well as through on the ground storm chasers.
Read more →
Radio code

A radio code is any code that is commonly used over a telecommunication system such as Morse code, brevity codes and procedure words. == Brevity code == Brevity codes are designed to convey complex information with a few words or codes. Specific brevity codes include: ACP-131 Aeronautical Code signals ARRL Numbered Radiogram Multiservice tactical brevity code Ten-code Phillips Code NOTAM Code === Operating signals === Brevity codes that are specifically designed for use between communications operators and to support communication operations are referred to as "operating signals". These include: Prosigns for Morse code 92 Code, Western Union telegraph brevity codes Q code, initially developed for commercial radiotelegraph communication, later adopted by other radio services, especially amateur radio. Used since circa 1909. QN Signals, published by the ARRL and used by Amateur radio operators to assist in the transmission of ARRL Radiograms in the National Traffic System. R and S brevity codes, published by the British Post Office in 1908 for coastal wireless stations and ships, superseded in 1912 by Q codes X code, used by European military services as a wireless telegraphy code in the 1930s and 1940s Z code, also used in the early days of radiotelegraph communication. == Other == Morse code is commonly used in amateur radio. Morse code abbreviations are a type of brevity code. Procedure words used in radiotelephony procedure, are a type of radio code. Spelling alphabets, including the ICAO spelling alphabet, are commonly used in communication over radios and telephones. == Other meanings == Many car audio systems (car radios) have a so-called 'radio code' number which needs to be entered after a power disconnection. This was introduced as a measure to deter theft of these devices. If the code is entered correctly, the radio is activated for use. Entering the code incorrectly several times in a row will cause a temporary or permanent lockout. Some car radios have another check which operates in conjunction with car electronics. If the VIN or another vehicle ID matches the previously stored one, the radio is activated. If the radio cannot verify the vehicle, it is considered to be moved into another vehicle. The radio will then request for the code number or simply refuse to operate and display an error message such as "CANCHECK" or "SECURE".
Read more →
Solid-state electronics

Solid-state electronics are semiconductor electronics: electronic equipment that use semiconductor devices such as transistors, diodes and integrated circuits (ICs). The term is also used as an adjective for devices in which semiconductor electronics that have no moving parts replace devices with moving parts, such as the solid-state relay, in which transistor switches are used in place of a moving-arm electromechanical relay, or the solid-state drive (SSD), a type of semiconductor memory used in computers to replace hard disk drives, which store data on rotating disks. == History == The term solid-state became popular at the beginning of the semiconductor era in the 1960s to distinguish this new technology. A semiconductor device works by controlling an electric current consisting of electrons or holes moving within a solid crystalline piece of semiconducting material such as silicon, while the thermionic vacuum tubes it replaced worked by controlling a current of electrons or ions in a vacuum within a sealed tube. Although the first solid-state electronic device was the cat's whisker detector, a crude semiconductor diode invented around 1904, solid-state electronics started with the invention of the transistor in 1947. Before that, all electronic equipment used vacuum tubes, because vacuum tubes were the only electronic components that could amplify—an essential capability in all electronics. The transistor, which was invented by John Bardeen and Walter Houser Brattain while working under William Shockley at Bell Laboratories in 1947, could also amplify, and replaced vacuum tubes. The first transistor hi-fi system was developed by engineers at GE and demonstrated at the University of Philadelphia in 1955. In terms of commercial production, The Fisher TR-1 was the first "all transistor" preamplifier, which became available mid-1956. In 1961, a company named Transis-tronics released a solid-state amplifier, the TEC S-15. The replacement of bulky, fragile, energy-hungry vacuum tubes by transistors in the 1960s and 1970s created a revolution not just in technology but in people's habits, making possible the first truly portable consumer electronics such as the transistor radio, cassette tape player, walkie-talkie and quartz watch, as well as the first practical computers and mobile phones. Other examples of solid state electronic devices are the microprocessor chip, LED lamp, solar cell, charge coupled device (CCD) image sensor used in cameras, and semiconductor laser. Also during the 1960s and 1970s, television set manufacturers switched from vacuum tubes to semiconductors, and advertised sets as "100% solid state" even though the cathode-ray tube (CRT) was still a vacuum tube. It meant only the chassis was 100% solid-state, not including the CRT. Early advertisements spelled out this distinction, but later advertisements assumed the audience had already been educated about it and shortened it to just "100% solid state". LED displays can be said to be truly 100% solid-state.
Read more →
DVD

DVD (digital video disc or digital versatile disc) is a digital optical disc data storage format. It was invented and developed in 1995 and first released on November 1, 1996, in Japan. The medium can store any kind of digital data and has been widely used to store video programs (watched using DVD players), software and other computer files. DVDs offer significantly higher storage capacity than compact discs (CD) while having the same dimensions. A standard single-layer DVD can store up to 4.7 GB of data, a dual-layer DVD up to 8.5 GB. Dual-layer, double-sided DVDs can store up to a maximum of 17.08 GB. Prerecorded DVDs are mass-produced using molding machines that physically stamp data onto the DVD. Such discs are a form of DVD-ROM because data can only be read and not written or erased. Blank recordable DVD discs (DVD-R and DVD+R) can be recorded once using a DVD recorder and then function as a DVD-ROM. Rewritable DVDs (DVD-RW, DVD+RW, and DVD-RAM) can be recorded and erased many times. DVDs are used in DVD-Video consumer digital video format and less commonly in DVD-Audio consumer digital audio format, as well as for authoring DVD discs written in a special AVCHD format to hold high definition material (often in conjunction with AVCHD format camcorders). DVDs containing other types of information may be referred to as DVD data discs. == Etymology == The Oxford English Dictionary comments that, "In 1995, rival manufacturers of the product initially named digital video disc agreed that, in order to emphasize the flexibility of the format for multimedia applications, the preferred abbreviation DVD would be understood to denote digital versatile disc." The OED also states that in 1995, "The companies said the official name of the format will simply be DVD. Toshiba had been using the name 'digital video disc', but that was switched to 'digital versatile disc' after computer companies complained that it left out their applications." "Digital versatile disc" is the explanation provided in a DVD Forum Primer from 2000 and in the DVD Forum's mission statement, which the purpose is to promote broad acceptance of DVD products on technology, across entertainment, and other industries. Because DVDs became highly popular for the distribution of movies in the 2000s, the term DVD became popularly used in English as a noun to describe specifically a full-length movie released on the format; for example the phrase "to watch a DVD" describes watching a movie on DVD. == History == === Development and launch === Released in 1987, CD Video used analog video encoding on optical discs matching the established standard 120 mm (4.7 in) size of audio CDs. Video CD (VCD) became one of the first formats for distributing digitally encoded films in this format, in 1993. In the same year, two new optical disc storage formats were being developed. One was the Multimedia Compact Disc (MMCD), backed by Philips and Sony (developers of the CD and CD-i), and the other was the Super Density (SD) disc, supported by Toshiba, Time Warner, Matsushita Electric, Hitachi, Mitsubishi Electric, Pioneer, Thomson, and JVC. By the time of the press launches for both formats in January 1995, the MMCD nomenclature had been dropped, and Philips and Sony were referring to their format as Digital Video Disc (DVD). On May 3, 1995, an ad hoc industry technical group formed from five computer companies (IBM, Apple, Compaq, Hewlett-Packard, and Microsoft) issued a press release stating that they would only accept a single format. The group voted to boycott both formats unless the two camps agreed on a single, converged standard. They recruited Lou Gerstner, president of IBM, to pressure the executives of the warring factions. In one significant compromise, the MMCD and SD groups agreed to adopt proposal SD 9, which specified that both layers of the dual-layered disc be read from the same side—instead of proposal SD 10, which would have created a two-sided disc that users would have to turn over. Philips/Sony strongly insisted on the source code, EFMPlus, that Kees Schouhamer Immink had designed for the MMCD, because it makes it possible to apply the existing CD servo technology. Its drawback was a loss from 5 to 4.7 Gigabytes of capacity. As a result, the DVD specification provided a storage capacity of 4.7 GB (4.38 GiB) for a single-layered, single-sided disc and 8.5 GB (7.92 GiB) for a dual-layered, single-sided disc. The DVD specification ended up similar to Toshiba and Matsushita's Super Density Disc, except for the dual-layer option. MMCD was single-sided and optionally dual-layer, whereas SD was two half-thickness, single-layer discs which were pressed separately and then glued together to form a double-sided disc. Philips and Sony decided that it was in their best interests to end the format war, and on September 15, 1995 agreed to unify with companies backing the Super Density Disc to release a single format, with technologies from both. After other compromises between MMCD and SD, the group of computer companies won the day, and a single format was agreed upon. The computer companies also collaborated with the Optical Storage Technology Association (OSTA) on the use of their implementation of the ISO-13346 file system (known as Universal Disk Format) for use on the new DVDs. The format's details were finalized on December 8, 1995. In November 1995, Samsung announced it would start mass-producing DVDs by September 1996. The format launched on November 1, 1996, in Japan, mostly with music video releases. The first major releases from Warner Home Video arrived on December 20, 1996, with four titles being available. The format's release in the U.S. was delayed multiple times, from August 1996, to October 1996, November 1996, before finally settling on early 1997. Players began to be produced domestically that winter, with March 24, 1997, as the U.S. launch date of the format proper in seven test markets. Approximately 32 titles were available on launch day, mainly from the Warner Bros., MGM, and New Line libraries, with the notable inclusion of the 1996 film Twister. However, the launch was planned for the following day (March 25), leading to a distribution change with retailers and studios to prevent similar violations of breaking the street date. The nationwide rollout for the format happened on August 22, 1997. DTS announced in late 1997 that they would be coming onto the format. The sound system company revealed details in a November 1997 online interview, and clarified it would release discs in early 1998. However, this date would be pushed back several times before finally releasing their first titles at the 1999 Consumer Electronics Show. In 2001, blank DVD recordable discs cost the equivalent of $27.34 US dollars in 2022. === Adoption === Movie and home entertainment distributors adopted the DVD format to replace the ubiquitous VHS tape as the primary consumer video distribution format. Immediately following the formal adoption of a unified standard for DVD, two of the four leading video game console companies (Sega and The 3DO Company) said they already had plans to design a gaming console with DVDs as the source medium. Sony stated at the time that they had no plans to use DVD in their gaming systems, despite being one of the developers of the DVD format and eventually the first company to actually release a DVD-based console. Game consoles such as the PlayStation 2, Xbox, and Xbox 360 use DVDs as their source medium for games and other software. Contemporary games for Windows were also distributed on DVD. Early DVDs were mastered using DLT tape, but using DVD-R DL or +R DL eventually became common. TV DVD combos, combining a standard definition CRT TV or an HD flat panel TV with a DVD mechanism under the CRT or on the back of the flat panel, and VCR/DVD combos were also available for purchase. For consumers, DVD soon overtook VHS as the favored choice for home movie releases. In 2001, DVD players outsold VCRs for the first time in the United States. At that time, one in four American households owned a DVD player. By 2007, about 80% of Americans owned a DVD player, a figure that had surpassed VCRs; it was also higher than personal computers or cable television. == Specifications == The DVD specifications created and updated by the DVD Forum are published as so-called DVD Books (e.g. DVD-ROM Book, DVD-Audio Book, DVD-Video Book, DVD-R Book, DVD-RW Book, DVD-RAM Book, DVD-AR (Audio Recording) Book, DVD-VR (Video Recording) Book, etc.). DVD discs are made up of two discs; normally one is blank, and the other contains data. Each disc is 0.6 mm thick, and they are glued together to form a DVD disc. The gluing process must be done carefully to make the disc as flat as possible to avoid both birefringence and "disc tilt", which is when the disc is not perfectly flat, preventing it from being read. Some specifications for mechanical, physical and optical characteristics of DV
Read more →
Deep learning

In machine learning, deep learning (DL) focuses on utilizing multilayered neural networks to perform tasks such as classification, regression, and representation learning. The field takes inspiration from biological neuroscience and revolves around stacking artificial neurons into layers and "training" them to process data. The adjective "deep" refers to the use of multiple layers (ranging from three to several hundred or thousands) in the network. Methods used can be supervised, semi-supervised or unsupervised. Some common deep learning network architectures include fully connected networks, deep belief networks, recurrent neural networks, convolutional neural networks, generative adversarial networks, transformers, and neural radiance fields. These architectures have been applied to fields including computer vision, speech recognition, natural language processing, machine translation, bioinformatics, drug design, medical image analysis, climate science, material inspection and board game programs, where they have produced results comparable to and in some cases surpassing human expert performance. Early forms of neural networks were inspired by information processing and distributed communication nodes in biological systems, particularly the human brain. However, current neural networks do not intend to model the brain function of organisms, and are generally seen as low-quality models for that purpose. == Overview == Most modern deep learning models are based on multi-layered neural networks such as convolutional neural networks and transformers, although they can also include propositional formulas or latent variables organized layer-wise in deep generative models such as the nodes in deep belief networks and deep Boltzmann machines. Fundamentally, deep learning refers to a class of machine learning algorithms in which a hierarchy of layers is used to transform input data into a progressively more abstract and composite representation. For example, in an image recognition model, the raw input may be an image (represented as a tensor of pixels). The first representational layer may attempt to identify basic shapes such as lines and circles, the second layer may compose and encode arrangements of edges, the third layer may encode a nose and eyes, and the fourth layer may recognize that the image contains a face. Importantly, a deep learning process can learn which features to optimally place at which level on its own. Prior to deep learning, machine learning techniques often involved hand-crafted feature engineering to transform the data into a more suitable representation for a classification algorithm to operate on. In the deep learning approach, features are not hand-crafted and the model discovers useful feature representations from the data automatically. This does not eliminate the need for hand-tuning; for example, varying numbers of layers and layer sizes can provide different degrees of abstraction. The word "deep" in "deep learning" refers to the number of layers through which the data is transformed. More precisely, deep learning systems have a substantial credit assignment path (CAP) depth. The CAP is the chain of transformations from input to output. CAPs describe potentially causal connections between input and output. For a feedforward neural network, the depth of the CAPs is that of the network and is the number of hidden layers plus one (as the output layer is also parameterized). For recurrent neural networks, in which a signal may propagate through a layer more than once, the CAP depth is potentially unlimited. No universally agreed-upon threshold of depth divides shallow learning from deep learning, but most researchers agree that deep learning involves CAP depth higher than two. CAP of depth two has been shown to be a universal approximator in the sense that it can emulate any function. Beyond that, more layers do not add to the function approximator ability of the network. Deep models (CAP > two) are able to extract better features than shallow models and hence, extra layers help in learning the features effectively. Deep learning architectures can be constructed with a greedy layer-by-layer method. Deep learning helps to disentangle these abstractions and pick out which features improve performance. Deep learning algorithms can be applied to unsupervised learning tasks. This is an important benefit because unlabeled data is more abundant than labeled data. Examples of deep structures that can be trained in an unsupervised manner are deep belief networks. The term deep learning was introduced to the machine learning community by Rina Dechter in 1986, and to artificial neural networks by Igor Aizenberg and colleagues in 2000, in the context of Boolean threshold neurons. The etymology of the term is more complicated. == Interpretations == Deep neural networks are generally interpreted in terms of the universal approximation theorem or probabilistic inference. The classic universal approximation theorem concerns the capacity of feedforward neural networks with a single hidden layer of finite size to approximate continuous functions. In 1989, the first proof was published by George Cybenko for sigmoid activation functions and was generalised to feed-forward multi-layer architectures in 1991 by Kurt Hornik. Recent work also showed that universal approximation also holds for non-bounded activation functions such as Kunihiko Fukushima's rectified linear unit. The universal approximation theorem for deep neural networks concerns the capacity of networks with bounded width but the depth is allowed to grow. Lu et al. proved that if the width of a deep neural network with ReLU activation is strictly larger than the input dimension, then the network can approximate any Lebesgue integrable function; if the width is smaller or equal to the input dimension, then a deep neural network is not a universal approximator. The probabilistic interpretation derives from the field of machine learning. It features inference, as well as the optimization concepts of training and testing, related to fitting and generalization, respectively. More specifically, the probabilistic interpretation considers the activation nonlinearity as a cumulative distribution function. The probabilistic interpretation led to the introduction of dropout as regularizer in neural networks. The probabilistic interpretation was introduced by researchers including Hopfield, Widrow and Narendra and popularized in surveys such as the one by Bishop. == History == === Before 1980 === There are two types of artificial neural network (ANN): feedforward neural network (FNN) or multilayer perceptron (MLP) and recurrent neural networks (RNN). RNNs have cycles in their connectivity structure, whereas FNNs do not. In the 1920s, Wilhelm Lenz and Ernst Ising created the Ising model which is essentially a non-learning RNN architecture consisting of neuron-like threshold elements. In 1972, Shun'ichi Amari made this architecture adaptive. His learning RNN was republished by John Hopfield in 1982. Other early recurrent neural networks were published by Kaoru Nakano in 1971. Already in 1948, Alan Turing produced work on "Intelligent Machinery" that was not published in his lifetime, containing "ideas related to artificial evolution and learning RNNs". Frank Rosenblatt (1958) proposed the perceptron, an MLP with 3 layers: an input layer, a hidden layer with randomized weights that did not learn, and an output layer. He later published a 1962 book that also introduced variants and computer experiments, including a version with four-layer perceptrons "with adaptive preterminal networks" where the last two layers have learned weights (here he credits H. D. Block and B. W. Knight). The book cites an earlier network by R. D. Joseph (1960) "functionally equivalent to a variation of" this four-layer system (the book mentions Joseph over 30 times). Should Joseph therefore be considered the originator of proper adaptive multilayer perceptrons with learning hidden units? Unfortunately, the learning algorithm was not a functional one, and fell into oblivion. The first working deep learning algorithm was the Group method of data handling, a method to train arbitrarily deep neural networks, published by Alexey Ivakhnenko and Lapa in 1965. They regarded it as a form of polynomial regression, or a generalization of Rosenblatt's perceptron to handle more complex, nonlinear, and hierarchical relationships. A 1971 paper described a deep network with eight layers trained by this method, which is based on layer by layer training through regression analysis. Superfluous hidden units are pruned using a separate validation set. Since the activation functions of the nodes are Kolmogorov-Gabor polynomials, these were also the first deep networks with multiplicative units or "gates". The first deep learning multilayer perceptron trained by stochastic gradient descent was published in 1967 by Shun'ichi
Read more →
IDN Times

IDN Times is a digital multi-platform media outlet that provides news and entertainment for Millennials and Gen Z in Indonesia. IDN Times is one of IDN’s business units under the Digital Media pillar, founded by Winston Utomo and William Utomo on June 8, 2014. Currently, senior journalist Uni Zulfiani Lubis serves as the Editor-in-Chief of IDN Times. == History == IDN Times was initially known as Indonesian Times, a blog featuring articles written by Winston Utomo while he was working at Google Singapore. As interest and readership grew, Indonesian Times evolved into IDN Times, a digital multi-platform media company focused on delivering relevant content for Indonesia’s younger generations. == Bureau == IDN Times has a representative bureau that has spread over 12 provinces in Indonesia: == Events == === Indonesia Millennial and Gen Z Summit === The Indonesia Millennial and Gen-Z Summit (IMGS) is an annual event organized by IDN. This event aims to empower Indonesia’s younger generations through discussions and interdisciplinary collaborations. IMGS features inspirational figures, professionals, and leaders from various fields who share insights and drive positive change. The event hosts dozens of discussion sessions in collaboration with eight prominent communities. Topics covered include politics, economics, technology, and pop culture. === Indonesia Writers Festival === The Indonesia Writers Festival is an independent writing festival organized by IDN Times. The event seeks to empower Indonesians through writing by inviting experts and literacy activists from various backgrounds. == Duniaku.com == Duniaku.com is a multi-platform digital media part of IDN Times which presents content about geek culture ranging from video games, anime, comics, films, technology and gadgets. Duniaku.com was officially launched on September 6, 2019 by the Minister of Communication and Informatics Rudiantara together with CEO of IDN Media Winston Utomo and IDN Times and Editor-in-Chief of Duniaku.com Uni Lubis. == Awards == 2019 IDN won WAN-IFRA Asia Digital Media Awards 2019 as the Best Digital Project to Engage Younger and/or Millennial Audiences for IDN Times’ #MillennialsMemilih program 2020 IDN Times (IDN Times Community) won WAN-IFRA Asia Digital Media Awards 2019 in The Best in Audience Engagement category. 2021 IDN Times journalists won awards at the Subroto Award, Ministry of Energy and Mineral Resources (ESDM) on 28 September 2021. 2024 IDN Times won WAN-IFRA event at both the Asia and Global levels in Best Use of AI in Revenue Strategy. === #Interconnected22 by Pulitzer Center === One of the IDN Times journalists, Dhana Kencana, was the speaker at the #Interconnected22 conference held from June 9 to June 10, 2022, in Washington DC, United States of America. Dhana Kencana is also a grant recipient Pulitzer Center through the Rainforest Journalism Fund (RJF) program, a funding program for journalists that makes a number of coverage of the rainforest.
Read more →
Packard Bell Statesman

The Packard Bell Statesman was an economy line of notebook-sized laptops introduced in 1993 by Packard Bell. They were slower in performance and lacked features compared to most competitor products, but they were lower in price. It was created in a collaboration between Packard Bell and Zenith Data Systems. The Statesman series was essentially a rebrand of Zenith Data Systems Z-Star 433 series, with the only notable difference of the logo in the middle and text on the front bezel. == History == In June 1993 Zenith Data Systems announced an alliance with Packard Bell. Zenith acquired about 20% of Packard Bell and they would both now work together to design and build PC's. Zenith would also provide Packard Bell with private-label versions of their portable PC's. The Packard Bell Statesman was a rebrand of the Zenith Z-Star notebook computer series. While the Statesman was being advertised by Packard Bell, the Z-Star series was also still being sold by Zenith. The Statesman was first introduced on October 4, 1993. Prices started at $1,500 for a monochrome or color DSTN model with a 33 MHz Cyrix Cx486SLC, 4 MB of RAM, 200 MB hard disk drive, internal 1.44 MB floppy disk drive, and MS-DOS 6.0 with Windows 3.1 for the included software. A "J mouse" pointing device was included, similar to the TrackPoint. The Statesman was expected to begin shipping within the next few weeks. == Specifications == === Hardware === CPU The first two models, the 200M and 200C, used the Cyrix Cx486SLC. This was Cyrix's first processor, which was a 386SX pin-compatible chip with on-board L1 cache and 486 instructions, being known as a "hybrid chip". The processor was clocked at 33 MHz and had 1 KB of L1 cache. It was a 16-bit processor and was pin compatible with the Intel 80386SX. On the bottom of the unit, the motherboard had an empty socket for a Cyrix FasMath co-processor, which could improve floating-point math performance. The 200M and 200C plus models had a Cyrix Cx486SLC2 clocked at 50 MHz, which was 50% faster than the original 486SLC. The SLC2 similarly had 1 KB of on-board cache and was pin compatible with the previous model. Graphics & Display For video all models used three versions of the Chips & Technologies 655xx, the CT65520, 65525, and 65530. The 65520 was first introduced in early 1992 as the first controller with Super VGA resolution. It supported resolutions up to 1024x768 in 16 colors or shades of gray. If in 800x600 resolution, it can display up to 256 colors. All 3 chips were the same, with the CT65525 identifying as a CT65530. The CT65530 had an ability of 5V and 3.3V mixed operation and linear video memory addressing. All models used a 9.5in 800x600 resolution DSTN LCD. The 200M and 200M Plus had a monochrome display, while the 200C and 200C Plus had a color display. Audio All models had only basic audio available, with just a piezo speaker soldered onto the motherboard and no sound controller. Memory Standard RAM included was 4-8 MB of EDO RAM. The RAM was on a proprietary SIPP package that could only be upgraded to 12 MB maximum if the user had compatible modules. Storage For storage all models used a hard drive with a size of 100 or 200 MB, and all models had an internal 1.44 MB floppy disk drive located on the side of the unit. The maximum capacity hard drive compatible if the user wanted to upgrade was 500 MB.Ports & Expansion For ports all models had 1x serial, 1x parallel, 1x VGA output, and 1x PS/2 keyboard/mouse input. For expansion all models only had one PCMCIA type II slot. Keyboard & Mouse All models used a small-scale keyboard with control keys. One interesting feature of the keyboard is that the J key also acted as a mouse, working similar to IBM's ThinkPad TrackPoint. On some models additional keys such as S, D, F, G and space let you do other mouse actions such as right click, left click, double click, and middle mouse click. === Software === The series shipped with MS-DOS and Windows 3.1 as the included operating system. == Model Comparison == Statesman 200M — The first Statesman model, it came with a DSTN monochrome screen, and a Nickel-cadmium battery pack which could last up to 4 hours. It weighed 7.4 lb and was $1500. Statesman 200C — The second Statesman model, it was the same as the 200M with the only notable differences of a DSTN color display rather than monochrome and a slightly decreased battery life of about 3 hours. It cost $700 more than the 200M at $2200. Statesman 200M/200C Plus — The 200M/200C Plus were both identical to their previous base models, with the only difference of them having a Cx486SLC2 running at 50 MHz. In 1994 it cost around $2,295 for the 200C plus with 4 MB of ram, with 8 MB costing an extra $400. == Reception == The Statesman received fair reception, with most reviewers giving positivity for the low price and high battery life, but mainly criticizing the performance and screen quality of the model line. A review by PC World writer Rex Farrance and Owen Linderholm said the 200M had a good price, being only $1500, and a good battery life which lasted about 4 hours. In benchmarks however, the 200M performed "noticeably below the average". It was noted that the 200M's worst feature was its monochrome display, being "cloudy and a bit dim for our tastes". The J mouse was considered a decent choice, and was said to be "highly usable" after some practice. The 200M was listed as number 3 on PC World's top 20 budget PC list. PC World also reviewed the 200C, saying the color display is only a "marginal, although an improvement on the monochrome version". The 200C placed 9 on the PC World top 20 budget PC list. Compute! Magazine reviewed the 200C Plus in September 1994 stating it "lagged far behind the others, especially the DXs, but then speed isn't everything". It was given pros for low cost and good display, but criticized for its low performance, not having a trackball, and poor external monitor support.
Read more →
Cyber-Duck

Cyber-Duck is a digital transformation agency founded in 2005 and based in Elstree, United Kingdom. The company specialises in user experience (UX), software development and digital optimisation. The company employs over 90 staff in the UK and Europe. It works with clients from the financial, pharmaceutical, sport, motoring and security sectors, among others. These include the Bank of England, Cancer Research UK, GOV.UK Verify partner CitizenSafe, The Commonwealth of Nations and Sport England. == History == Cyber-Duck was founded in 2005 by Danny Bluestone in his flat in Mill Hill, United Kingdom. After a few months, the firm moved into its first office in Borehamwood. Projects with Ogilvy, London Creative and Wisteria followed before Cyber-Duck moved to offices in Devonshire House, Borehamwood. In 2010, the firm was commissioned to develop a website for the European Commission in the UK. In 2011, the company moved to a self-contained premises in Elstree, Hertfordshire. Shortly afterward, Cyber-Duck was listed on the Deloitte Technology Fast 500 EMEA in recognition of its substantial revenue growth over the previous five years. As the company grew, its expertise also broadened. This resulted in guest spots on several television shows. Cyber-Duck was featured in an episode of the Gadget Show in 2011, and Chief Production Officer Matt Gibson appeared on BBC Watchdog in 2013 to assist in researching websites and their checkout processes. The firm continued to attract business from companies in London, so the decision was made to open a new office in central London. The Farringdon office opened in 2015, and was followed by a rebrand. In 2016, Cyber-Duck went on to work with the Bank of England. Ahead of the launch of the new polymer £5 note, featuring Winston Churchill, the company was tasked with creating a user-friendly website to showcase the new banknote and promote public awareness. The success of the campaign led to further commissions, including 2017's website the New Ten and a redesign of the Bank of England's main website. The firm underwent significant growth in 2020, beginning working partnerships with Sport England and the College of Policing. During this time they also launched DevOps as a new service. In 2022, the Farringdon office closed and was relocated to a new office space in Holborn. The Laravel, Drupal and DevOps teams expanded, and Cyber-Duck became the lead Digital Agency for Worcester, Bosch Group. Several members of the team appeared on The Digital Society on Sky UK. == Awards and accreditations == Cyber-Duck is known for its focus on process accreditation as a driver of creativity. In 2011, the company obtained its first ISO 9241 accreditation in Human Centred Design for interactive systems. Two years later, Cyber-Duck obtained a further certification, the ISO 9001 for Quality Management Systems. It acquired another certification in 2016 with the ISO 27001 – the focus of this accreditation was Information Security Management. In 2022, Cyber-Duck gained the ISO 14001 certification in Environmental Management. Cyber-Duck's digital products have won numerous Wirehive 100, BIMA and Webby awards. Notably, the company's UX Companion, a free iOS and Android app that is a glossary of UX theories, featured in Usability Geek and Smashing Magazine. In 2021 they were awarded as one of the UK's 100 Best Small Companies to work for, and BIMA10 shortlisted for their work with Sport England and This Girl Can.
Read more →
Mixed raster content

Mixed raster content (MRC) is a method for compressing images that contain both binary-compressible text and continuous-tone components, using image segmentation methods to improve the level of compression and the quality of the rendered image. By separating the image into components with different compressibility characteristics, the most efficient and accurate compression algorithm for each component can be applied. MRC-compressed images are typically packaged into a hybrid file format such as DjVu and sometimes PDF. This allows for multiple images, and the instructions to properly render and reassemble them, to be stored within a single file. Some image scanners optionally support MRC when scanning to PDF. A typical manual states that without MRC, the image is generated in a single process, with text and graphics not distinguished. With MRC, separate processes are used for text, graphics, and other elements, producing clearer graphics and sharper text, at the price of slightly slower processing. MRC is recommended to optimise the scanning of documents with harder-to-read text or lower-quality graphics. MRC can also reduce the size of the scanned file, though higher compression using JBIG2 can sometimes lead to character substitution errors in scanned documents. == File format == A form of MRC is defined by international standard bodies as ISO/IEC 16485, or ITU recommendation T.44 (accessible free of charge). It defines a file format with bilevel masks and two data layers in each "stripe" of the image. The mask can be encoded in ITU T.4, JBIG1, or JBIG2, while the images can be JPEG, JBIG1, or run-length encoded color. The format is loosely based on JPEG, with a APP13 segment registered for this purpose. It is not known whether this file format is actually used, as formats like DjVu and PDF have their own ways of defining layers and masks.
Read more →
Signal-to-crosstalk ratio

The signal-to-crosstalk ratio at a specified point in a circuit is the ratio of the power of the wanted signal to the power of the unwanted signal from another channel. The signals are adjusted in each channel so that they are of equal power at the zero transmission level point in their respective channels. The signal-to-crosstalk ratio is usually expressed in dB.
Read more →
Digital classics

Digital classics is the application of the tools of digital humanities to the field of classics, or more broadly to the study of the ancient world. == History == Classics was one of the first of the humanities disciplines to adopt computing approaches; the first references to the use of computing in the classical humanities date to the early 1960s, which might be surprising considering the reputation of the discipline as old-fashioned and stuffily traditionalist. Major projects such as the Thesaurus Linguae Graecae, founded in 1972, and the text collections of the Packard Humanities Institute set the trend, and there are still a significantly large number of ancient world projects among Humanities Computing projects today. Also, the success of traditional scholarly publications in digital guises, such as seen in the Bryn Mawr Classical Review, and the early adoption of hypertext in high profile projects like the Perseus Digital Library helped to legitimize computing in the study of classics in ways that has not always been the case in other areas of the humanities. This apparent paradox may be as a result of the many methodologies and different sources of evidence that classicists have always had to embrace, from literary sources and linguistics, to art history and archaeology, history, philosophy, religious theory, ancient documents such as inscriptions and papyri, and so forth. The fragmentary nature of many of the texts and languages of the ancient world, the scattered evidence from the material culture of ancient Greece and Rome, and the necessity to evaluate all these varieties of evidence in context are particularly likely to benefit from digital approaches such as databases, text markup, image manipulation and machine learning. == Digital classics projects == There are currently several major projects that aim to encourage and develop digital approaches to classical scholarship. The Stoa Consortium at the University of Kentucky distributes news of the discipline, and serves as a peer-reviewed electronic publication venue, and encourages open source approaches to digital classics. The Perseus Project is a digital library that also provides a collection of digital texts and analysis tools to the public; principally (but not exclusively) classical. Digital Classicist is another project and community which shares information and advice about the digital humanities applied to the field of classics. Epigraphy.info is an international open community pursuing a collaborative environment for digital epigraphy. The Liverpool Classics Mailing List is a project which can be subscribed to in which one receives email regarding Classics events around the world, as well as call for papers, studentships and public lectures.
Read more →
Nanonetwork

A nanonetwork or nanoscale network is a set of interconnected nanomachines (devices a few hundred nanometers or a few micrometers at most in size) which are able to perform only very simple tasks such as computing, data storing, sensing and actuation. Nanonetworks are expected to expand the capabilities of single nanomachines both in terms of complexity and range of operation by allowing them to coordinate, share and fuse information. Nanonetworks enable new applications of nanotechnology in the biomedical field, environmental research, military technology and industrial and consumer goods applications. Nanoscale communication is defined in IEEE P1906.1. == Communication approaches == Classical communication paradigms need to be revised for the nanoscale. The two main alternatives for communication in the nanoscale are based either on electromagnetic communication or on molecular communication. === Electromagnetic === This is defined as the transmission and reception of electromagnetic radiation from components based on novel nanomaterials. Recent advancements in carbon and molecular electronics have opened the door to a new generation of electronic nanoscale components such as nanobatteries, nanoscale energy harvesting systems, nano-memories, logical circuitry in the nanoscale and even nano-antennas. From a communication perspective, the unique properties observed in nanomaterials will decide on the specific bandwidths for emission of electromagnetic radiation, the time lag of the emission, or the magnitude of the emitted power for a given input energy, amongst others. For the time being, two main alternatives for electromagnetic communication in the nanoscale have been envisioned. First, it has been experimentally demonstrated that is possible to receive and demodulate an electromagnetic wave by means of a nanoradio, i.e., an electromechanically resonating carbon nanotube which is able to decode an amplitude or frequency modulated wave. Second, graphene-based nano-antennas have been analyzed as potential electromagnetic radiators in the terahertz band. === Molecular === Molecular communication is defined as the transmission and reception of information by means of molecules. The different molecular communication techniques can be classified according to the type of molecule propagation in walkaway-based, flow-based or diffusion-based communication. In walkway-based molecular communication, the molecules propagate through pre-defined pathways by using carrier substances, such as molecular motors. This type of molecular communication can also be achieved by using E. coli bacteria as chemotaxis. In flow-based molecular communication, the molecules propagate through diffusion in a fluidic medium whose flow and turbulence are guided and predictable. The hormonal communication through blood streams inside the human body is an example of this type of propagation. The flow-based propagation can also be realized by using carrier entities whose motion can be constrained on the average along specific paths, despite showing a random component. A good example of this case is given by pheromonal long range molecular communications. In diffusion-based molecular communication, the molecules propagate through spontaneous diffusion in a fluidic medium. In this case, the molecules can be subject solely to the laws of diffusion or can also be affected by non-predictable turbulence present in the fluidic medium. Pheromonal communication, when pheromones are released into a fluidic medium, such as air or water, is an example of diffusion-based architecture. Other examples of this kind of transport include calcium signaling among cells, as well as quorum sensing among bacteria. Based on the macroscopic theory of ideal (free) diffusion the impulse response of a unicast molecular communication channel was reported in a paper that identified that the impulse response of the ideal diffusion based molecular communication channel experiences temporal spreading. Such temporal spreading has a deep impact in the performance of the system, for example in creating the intersymbol interference (ISI) at the receiving nanomachine. In order to detect the concentration-encoded molecular signal two detection methods named sampling-based detection (SD) and energy-based detection (ED) have been proposed. While the SD approach is based on the concentration amplitude of only one sample taken at a suitable time instant during the symbol duration, the ED approach is based on the total accumulated number of molecules received during the entire symbol duration. In order to reduce the impact of ISI a controlled pulse-width based molecular communication scheme has been analysed. The work presented in showed that it is possible to realize multilevel amplitude modulation based on ideal diffusion. A comprehensive study of pulse-based binary and sinus-based, concentration-encoded molecular communication system have also been investigated.
Read more →
Pixel aspect ratio

A pixel aspect ratio (PAR) is a mathematical ratio that describes how the width of a pixel in a digital image compares to the height of that pixel. Most digital imaging systems display an image as a grid of tiny, square pixels. However, some imaging systems, especially those that must be compatible with standard-definition television motion pictures, display an image as a grid of rectangular pixels, in which the pixel width and height are different. Pixel aspect ratio describes this difference. Use of pixel aspect ratio mostly involves pictures pertaining to standard-definition television and some other exceptional cases. Most other imaging systems, including those that comply with SMPTE standards and practices, use square pixels. PAR is also known as sample aspect ratio and abbreviated SAR, though it can be confused with storage aspect ratio. == Introduction == The ratio of the width to the height of an image is known as the aspect ratio, or more precisely the display aspect ratio (DAR) – the aspect ratio of the image as displayed; for TV, DAR was traditionally 4:3 (a.k.a. fullscreen), with 16:9 (a.k.a. widescreen) now the standard for HDTV. In digital images, there is a distinction with the storage aspect ratio (SAR), which is the ratio of pixel dimensions. If an image is displayed with square pixels, then these ratios agree; if not, then non-square, "rectangular" pixels are used, and these ratios disagree. The aspect ratio of the pixels themselves is known as the pixel aspect ratio (PAR) – for square pixels this is 1:1 – and these are related by the identity: Rearranging (solving for PAR) yields: For example: A 640 × 480 VGA image has a SAR of 640/480 = 4:3, and if displayed on a 4:3 display (DAR = 4:3) has square pixels, hence a PAR of 1:1. By contrast, a 720 × 576 D-1 PAL image has a SAR of 720/576 = 5:4, but if displayed on a 4:3 display (DAR = 4:3) the PAR is 4/3 : 5/4 = 16:15 ≈ 1.066. This means that the pixels of the PAL picture must be "stretched" by this amount to fit in the 4:3 display. In analog images such as film there is no notion of pixel, nor notion of SAR or PAR, but in the digitization of analog images the resulting digital image has pixels, hence SAR (and accordingly PAR, if displayed at the same aspect ratio as the original). Non-square pixels arise often in early digital TV standards, related to digitalization of analog TV signals – whose vertical and "effective" horizontal resolutions differ and are thus best described by non-square pixels – and also in some digital video cameras and computer display modes, such as Color Graphics Adapter (CGA). Today they arise also in transcoding between resolutions with different SARs. Actual displays do not generally have non-square pixels, though digital sensors might; they are rather a mathematical abstraction used in resampling images to convert between resolutions. There are several complicating factors in understanding PAR, particularly as it pertains to digitization of analog video: First, analog video does not have pixels, but rather a raster scan, and thus has a well-defined vertical resolution (the lines of the raster), but not a well-defined horizontal resolution, since each line is an analog signal. However, by a standardized sampling rate, the effective horizontal resolution can be determined by the sampling theorem, as is done below. Second, due to overscan, some of the lines at the top and bottom of the raster are not visible, as are some of the possible image on the left and right – see Overscan: Analog to digital resolution issues. Also, the resolution may be rounded (DV NTSC uses 480 lines, rather than the 486 that are possible). Third, analog video signals are interlaced – each image (frame) is sent as two "fields", each with half the lines. Thus either the pixels are twice as tall as they would be without interlacing, or the image is deinterlaced. == Background == Video is presented as a sequential series of images called video frames. Historically, video frames were created and recorded in analog form. As digital display technology, digital broadcast technology, and digital video compression evolved separately, it resulted in video frame differences that must be addressed using pixel aspect ratio. Digital video frames are generally defined as a grid of pixels used to present each sequential image. The horizontal component is defined by pixels (or samples), and is known as a video line. The vertical component is defined by the number of lines, as in 480 lines. Standard-definition television standards and practices were developed as broadcast technologies and intended for terrestrial broadcasting, and were therefore not designed for digital video presentation. Such standards define an image as an array of well-defined horizontal "Lines", well-defined vertical "Line Duration" and a well-defined picture center. However, there is not a standard-definition television standard that properly defines image edges or explicitly demands a certain number of picture elements per line. Furthermore, analog video systems such as NTSC 480i and PAL 576i, instead of employing progressively displayed frames, employ fields or interlaced half-frames displayed in an interwoven manner to reduce flicker and double the image rate for smoother motion. === Analog-to-digital conversion === As a result of computers becoming powerful enough to serve as video editing tools, video digital-to-analog converters and analog-to-digital converters were made to overcome this incompatibility. To convert analog video lines into a series of square pixels, the industry adopted a default sampling rate at which luma values were extracted into pixels. The luma sampling rate for 480i pictures was 12+3⁄11 MHz and for 576i pictures was 14+3⁄4 MHz. The term pixel aspect ratio was first coined when ITU-R BT.601 (commonly known as Rec. 601) specified that standard-definition television pictures are made of lines of exactly 720 non-square pixels. ITU-R BT.601 did not define the exact pixel aspect ratio but did provide enough information to calculate the exact pixel aspect ratio based on industry practices: The standard luma sampling rate of precisely 13+1⁄2 MHz. Based on this information: The pixel aspect ratio for 480i would be 10:11 as: 12 3 11 ÷ 13 1 2 = 10 11 {\displaystyle 12{\tfrac {3}{11}}\div 13{\tfrac {1}{2}}={\tfrac {10}{11}}} The pixel aspect ratio for 576i would be 59:54 as: 14 3 4 ÷ 13 1 2 = 59 54 {\displaystyle 14{\tfrac {3}{4}}\div 13{\tfrac {1}{2}}={\tfrac {59}{54}}} SMPTE RP 187 further attempted to standardize the pixel aspect ratio values for 480i and 576i. It designated 177:160 for 480i or 1035:1132 for 576i. However, due to significant difference with practices in effect by industry and the computational load that they imposed upon the involved hardware, SMPTE RP 187 was simply ignored. SMPTE RP 187 information annex A.4 further suggested the use of 10:11 for 480i. As of this writing, ITU-R BT.601-6, which is the latest edition of ITU-R BT.601, still implies that the pixel aspect ratios mentioned above are correct. === Digital video processing === As stated above, ITU-R BT.601 specified that standard-definition television pictures are made of lines of 720 non-square pixels, sampled with a precisely specified sampling rate. A simple mathematical calculation reveals that a 704 pixel width would be enough to contain a 480i or 576i standard 4:3 picture: A 4:3 480-line picture, digitized with the Rec. 601-recommended sampling rate, would be 704 non-square pixels wide. x 480 × 10 11 = 4 3 ⇒ x = 480 × 11 × 4 10 × 3 = 704 {\displaystyle {\frac {x}{480}}\times {\frac {10}{11}}={\frac {4}{3}}\Rightarrow x={\frac {480\times 11\times 4}{10\times 3}}=704} A 4:3 576-line picture, digitized with the Rec. 601-recommended sampling rate, would be 702+54⁄59 non-square pixels wide. x 576 × 59 54 = 4 3 ⇒ x = 576 × 54 × 4 59 × 3 = 702 54 59 {\displaystyle {\frac {x}{576}}\times {\frac {59}{54}}={\frac {4}{3}}\Rightarrow x={\frac {576\times 54\times 4}{59\times 3}}=702{\tfrac {54}{59}}} Unfortunately, not all standard TV pictures are exactly 4:3: As mentioned earlier, in analog video, the center of a picture is well-defined but the edges of the picture are not standardized. As a result, some analog devices (mostly PAL devices but also some NTSC devices) generated motion pictures that were horizontally (slightly) wider. This also proportionately applies to anamorphic widescreen (16:9) pictures. Therefore, to maintain a safe margin of error, ITU-R BT.601 required sampling 16 more non-square pixels per line (8 more at each edge) to ensure saving all video data near the margins. This requirement, however, had implications for PAL motion pictures. PAL pixel aspect ratios for standard (4:3) and anamorphic wide screen (16:9), respectively 59:54 and 118:81, were awkward for digital image processing, especially for mixing PAL and NTSC video clips. Therefore, video editing products chose the almost equivalent value
Read more →
Nanonetwork

A nanonetwork or nanoscale network is a set of interconnected nanomachines (devices a few hundred nanometers or a few micrometers at most in size) which are able to perform only very simple tasks such as computing, data storing, sensing and actuation. Nanonetworks are expected to expand the capabilities of single nanomachines both in terms of complexity and range of operation by allowing them to coordinate, share and fuse information. Nanonetworks enable new applications of nanotechnology in the biomedical field, environmental research, military technology and industrial and consumer goods applications. Nanoscale communication is defined in IEEE P1906.1. == Communication approaches == Classical communication paradigms need to be revised for the nanoscale. The two main alternatives for communication in the nanoscale are based either on electromagnetic communication or on molecular communication. === Electromagnetic === This is defined as the transmission and reception of electromagnetic radiation from components based on novel nanomaterials. Recent advancements in carbon and molecular electronics have opened the door to a new generation of electronic nanoscale components such as nanobatteries, nanoscale energy harvesting systems, nano-memories, logical circuitry in the nanoscale and even nano-antennas. From a communication perspective, the unique properties observed in nanomaterials will decide on the specific bandwidths for emission of electromagnetic radiation, the time lag of the emission, or the magnitude of the emitted power for a given input energy, amongst others. For the time being, two main alternatives for electromagnetic communication in the nanoscale have been envisioned. First, it has been experimentally demonstrated that is possible to receive and demodulate an electromagnetic wave by means of a nanoradio, i.e., an electromechanically resonating carbon nanotube which is able to decode an amplitude or frequency modulated wave. Second, graphene-based nano-antennas have been analyzed as potential electromagnetic radiators in the terahertz band. === Molecular === Molecular communication is defined as the transmission and reception of information by means of molecules. The different molecular communication techniques can be classified according to the type of molecule propagation in walkaway-based, flow-based or diffusion-based communication. In walkway-based molecular communication, the molecules propagate through pre-defined pathways by using carrier substances, such as molecular motors. This type of molecular communication can also be achieved by using E. coli bacteria as chemotaxis. In flow-based molecular communication, the molecules propagate through diffusion in a fluidic medium whose flow and turbulence are guided and predictable. The hormonal communication through blood streams inside the human body is an example of this type of propagation. The flow-based propagation can also be realized by using carrier entities whose motion can be constrained on the average along specific paths, despite showing a random component. A good example of this case is given by pheromonal long range molecular communications. In diffusion-based molecular communication, the molecules propagate through spontaneous diffusion in a fluidic medium. In this case, the molecules can be subject solely to the laws of diffusion or can also be affected by non-predictable turbulence present in the fluidic medium. Pheromonal communication, when pheromones are released into a fluidic medium, such as air or water, is an example of diffusion-based architecture. Other examples of this kind of transport include calcium signaling among cells, as well as quorum sensing among bacteria. Based on the macroscopic theory of ideal (free) diffusion the impulse response of a unicast molecular communication channel was reported in a paper that identified that the impulse response of the ideal diffusion based molecular communication channel experiences temporal spreading. Such temporal spreading has a deep impact in the performance of the system, for example in creating the intersymbol interference (ISI) at the receiving nanomachine. In order to detect the concentration-encoded molecular signal two detection methods named sampling-based detection (SD) and energy-based detection (ED) have been proposed. While the SD approach is based on the concentration amplitude of only one sample taken at a suitable time instant during the symbol duration, the ED approach is based on the total accumulated number of molecules received during the entire symbol duration. In order to reduce the impact of ISI a controlled pulse-width based molecular communication scheme has been analysed. The work presented in showed that it is possible to realize multilevel amplitude modulation based on ideal diffusion. A comprehensive study of pulse-based binary and sinus-based, concentration-encoded molecular communication system have also been investigated.
Read more →
End-to-end encryption

End-to-end encryption (E2EE) is a method of implementing a secure communication system where only the sender and intended recipient can read the messages. No one else, including the system provider, telecom providers, Internet providers or malicious actors, can access the cryptographic keys needed to read or send messages. End-to-end encryption prevents data from being read or secretly modified, except by the sender and intended recipients. In many applications, messages are relayed from a sender to some recipients by a service provider. In an E2EE-enabled service, messages are encrypted on the sender's device such that no third party, including the service provider, has the means to decrypt them. The recipients retrieve encrypted messages and decrypt them independently on their own devices. Since third parties cannot decrypt the data being communicated or stored, services with E2EE are better at protecting user data from data breaches and espionage. Computer security experts, digital freedom organizations, and human rights activists advocate for the use of E2EE due to its security and privacy benefits, including its ability to resist mass surveillance. Popular messaging apps like WhatsApp, iMessage, Facebook Messenger, and Signal use end-to-end encryption for chat messages, with some also supporting E2EE of voice and video calls. As of May 2025, WhatsApp is the most widely used E2EE messaging service, with over 3 billion users. Meanwhile, Signal with an estimated 70 million users, is regarded as the current gold standard in secure messaging by cryptographers, protestors, and journalists. Since end-to-end encrypted services cannot offer decrypted messages in response to government requests, the proliferation of E2EE has been met with controversy. Around the world, governments, law enforcement agencies, and child protection groups have expressed concerns over its impact on criminal investigations. As of 2025, some governments have successfully passed legislation targeting E2EE, such as Australia's Telecommunications and Other Legislation Amendment Act (2018) and the Online Safety Act (2023) in the UK. Other attempts at restricting E2EE include the EARN IT Act in the US and the Child Sexual Abuse Regulation in the EU.[1] Nevertheless, some government bodies such as the UK's Information Commissioner's Office and the US's Cybersecurity and Infrastructure Security Agency (CISA) have argued for the use of E2EE, with Jeff Greene of the CISA advising that "encryption is your friend" following the discovery of the Salt Typhoon espionage campaign in 2024. == Definitions == End-to-end encryption is a means of ensuring the security of communications in applications like secure messaging. Under E2EE, messages are encrypted on the sender's device such that they can be decoded only by the final recipient's device. In many non-E2EE messaging systems, including email and many chat platforms, messages pass through intermediaries and are stored by a third party service provider, from which they are retrieved by the recipient. Even if messages are encrypted, they are only encrypted 'in transit', and are thus accessible by the service provider. Server-side disk encryption is also distinct from E2EE because it does not prevent the service provider from viewing the information, as they have the encryption keys and can simply decrypt it. The term "end-to-end encryption" originally only meant that the communication is never decrypted during its transport from the sender to the receiver. For example, around 2003, E2EE was proposed as an additional layer of encryption for GSM or TETRA, in addition to the existing radio encryption protecting the communication between the mobile device and the network infrastructure. This has been standardized by SFPG for TETRA. Note that in TETRA, the keys are generated by a Key Management Centre (KMC) or a Key Management Facility (KMF), not by the communicating users. Later, around 2014, the meaning of "end-to-end encryption" started to evolve when WhatsApp encrypted a portion of its network, requiring that not only the communication stays encrypted during transport, but also that the provider of the communication service is not able to decrypt the communications—maliciously or when requested by law enforcement agencies. Similarly, messages must be undecryptable in transit by attackers through man-in-the-middle attacks. This new meaning is now the widely accepted one. == Motivations == The lack of end-to-end encryption can allow service providers to easily provide search and other features, or to scan for illegal and unacceptable content. However, it also means that content can be read by anyone who has access to the data stored by the service provider, by design or via a backdoor. This can be a concern in many cases where privacy is important, such as in governmental and military communications, financial transactions, and when sensitive information such as health and biometric data are sent. If this content were shared without E2EE, a malicious actor or adversarial government could obtain it through unauthorized access or subpoenas targeted at the service provider. E2EE alone does not guarantee privacy or security. For example, the data may be held unencrypted on the user's own device or accessed through their own app if their credentials are compromised. == Modern implementations == === Messaging === In May 2026, Meta ended support for end-to-end encryption (E2EE) on Instagram, reversing a previous commitment to expand the technology across its messaging services. The company justified the move as a measure to mitigate fraudulent activity and facilitate the detection of harmful content. The decision highlighted a conflict between digital privacy and online safety; while child protection organizations supported the change to better identify predatory behavior, privacy advocates argued that removing E2EE compromises user security. As of 2025, messaging apps like Signal and WhatsApp are designed to exclusively use end-to-end encryption. Both Signal and WhatsApp use the Signal Protocol. Other messaging apps and protocols that support end-to-end encryption include Facebook Messenger, iMessage, Telegram, Matrix, and Keybase. Although Telegram supports end-to-end encryption, it has been criticized for not enabling it by default, instead supporting E2EE through opt-in "secret chats". As of 2020, Telegram did not support E2EE for group chats and no E2EE on its desktop clients. In 2022, after controversy over the use of Facebook Messenger messages in an abortion lawsuit in Nebraska, Facebook added support for end-to-end encryption in the Messenger app. Writing for Wired, technologist Albert Fox Cahn criticized Messenger's approach to end-to-end encryption, which required the user to opt into E2EE for each conversation and split the message thread into two chats which were easy for users to confuse. In December 2023, Facebook announced plans to enable end-to-end encryption by default despite pressure from British law enforcement agencies. As of 2016, many server-based communications systems did not include end-to-end encryption. These systems can only guarantee the protection of communications between clients and servers, meaning that users have to trust the third parties who are running the servers with the sensitive content. End-to-end encryption is regarded as safer because it reduces the number of parties who might be able to interfere or break the encryption. In the case of instant messaging, users may use a third-party client or plugin to implement an end-to-end encryption scheme over an otherwise non-E2EE protocol. === Audio and video conferencing === Signal and WhatsApp use end-to-end encryption for audio and video calls. Since 2020, Signal has also supported end-to-encrypted video calls. In 2024, Discord added end-to-end encryption for audio and video calls, voice channels, and certain live streams. However, they had no plans to implement E2EE for messages. In 2020, after acquiring Keybase, Zoom announced end-to-end encryption would be limited to paid accounts. Following criticism from human rights advocates, Zoom extended the feature to all users with accounts. In 2021, Zoom settled an $85M class action lawsuit over past misrepresentation about end-to-end encryption. The FTC confirmed Zoom previously retained access to meeting keys. === Other uses === Some encrypted backup and file sharing services provide client-side encryption. Nextcloud and MEGA, offer end-to-end encryption of shared files. The term "end-to-end encryption" is sometimes incorrectly used to describe client-side encryption. Some non-E2EE systems, such as Lavabit and Hushmail, have described themselves as offering "end-to-end" encryption when they did not. == Law enforcement and regulation == In 2022, Facebook Messenger came under scrutiny because the messages between a mother and daughter in Nebraska were used to seek criminal charges in an abortion-rel
Read more →