AI For Business Edinburgh

AI For Business Edinburgh — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Cyclodisparity

    Cyclodisparity

    In vision science, cyclodisparity is the difference in the rotation angle of an object or scene viewed by the left and right eyes. Cyclodisparity can result from the eyes' torsional rotation (cyclorotation) or can be created artificially by presenting to the eyes two images that need to be rotated relative to each other for binocular fusion to take place. == Human and animal vision == The eyes and visual system can compensate for cyclodisparity up to a certain point; if the cyclodisparity is larger than a threshold, the images cannot be fused, resulting stereoblindness, and in double vision in subjects who otherwise have full stereo vision. When a human subject is presented with images that have artificial cyclodisparity, cyclovergence is evoked, that is, a motor response of the eye muscles that rotates the two eyes in opposite directions, thereby reducing cyclodisparity. Visually-induced cyclovergence of up to 8 degrees has been observed in normal subjects. Furthermore, up to about 8 degrees can usually be compensated by purely sensory means, that is, without physical eye rotation. This means that the normal human observer can achieve binocular image fusion in presence of cyclodisparity of up to approximately 16 degrees. Cyclodisparity due to images having been rotated inward can be compensated better when the gaze is directed downwards, and cyclodisparity due to an outward rotation can be compensated better when the gaze is directed upwards. A proposed explanation for this phenomenon is that the motor system is coordinated in such a way that the eyes perform a torsional movement to reduce the size of the search zones and thus the computational load required for solving the correspondence problem. The resulting cyclovergence at near gaze is smaller than the cyclovergence predicted by Listing's law. == Video processing and computer vision == Active camera torsion can be used in machine and computer vision for several purposes. For instance, camera torsion can be used to make improved use of the search range over which matching detectors or stereo matching algorithms operate, or to make a 3D slanted surface appear frontoparallel for further stereo processing. For image compression purposes, images with cyclodisparity are advantageously encoded using global motion compensation using a rotational motion model.

    Read more →
  • TRAME

    TRAME

    TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol

    Read more →
  • Data steward

    Data steward

    A data steward is an oversight or data governance role within an organization, and is responsible for ensuring the quality and fitness for purpose of the organization's data assets, including the metadata for those data assets. A data steward may share some responsibilities with a data custodian, such as the awareness, accessibility, release, appropriate use, security and management of data. A data steward would also participate in the development and implementation of data assets. A data steward may seek to improve the quality and fitness for purpose of other data assets their organization depends upon but is not responsible for. Data stewards have a specialist role that utilizes an organization's data governance processes, policies, guidelines and responsibilities for administering an organizations' entire data in compliance with policy and/or regulatory obligations (e.g., GDPR, HIPAA). The overall objective of a data steward is the data quality of the data assets, datasets, data records and data elements. This includes documenting metainformation for the data, such as definitions, related rules/governance, physical manifestation, and related data models (most of these properties being specific to an attribute/concept relationship), identifying owners/custodian's various responsibilities, relations insight pertaining to attribute quality, aiding with project requirement data facilitation and documentation of capture rules. Data stewards begin the stewarding process with the identification of the data assets and elements which they will steward, with the ultimate result being standards, controls and data entry. The steward works closely with business glossary standards analysts (for standards), with data architect/modelers (for standards), with DQ analysts (for controls) and with operations team members (good-quality data going in per business rules) while entering data. Data stewardship roles are common when organizations attempt to exchange data precisely and consistently between computer systems and to reuse data-related resources. Master data management often makes references to the need for data stewardship for its implementation to succeed. Data stewardship must have precise purpose, fit for purpose or fitness. == Data steward responsibilities == A data steward ensures that each assigned data element: Has clear and unambiguous data element definition Does not conflict with other data elements in the metadata registry (removes duplicates, overlap etc.) Has clear enumerated value definitions if it is of type Code Is still being used (remove unused data elements) Is being used consistently in various computer systems Is being used, fit for purpose = Data Fitness Has adequate documentation on appropriate usage and notes Documents the origin and sources of authority on each metadata element Is protected against unauthorised access or change Responsibilities of data stewards vary between different organisations and institutions. For example, at Delft University of Technology, data stewards are perceived as the first contact point for any questions related to research data. They also have subject-specific background allowing them to easily connect with researchers and to contextualise data management problems to take into account disciplinary practices. == Types of data stewards == Depending on the set of data stewardship responsibilities assigned to an individual, there are 4 types (or dimensions of responsibility) of data stewards typically found within an organization: Data object data steward - responsible for managing reference data and attributes of one business data entity Business data steward - responsible for managing critical data, both reference and transactional, created or used by one business function. The data steward may also serve as a liaison between the organization's data users and technical teams, helping to bridge the gap between business needs and technical requirements. They may also play a role in educating others within the organization about best practices for data management, and advocating for data-driven decision-making. Process data steward - responsible for managing data across one business process System data steward - responsible for managing data for at least one IT system == Benefits of data stewardship == Systematic data stewardship can foster: Faster analysis Consistent use of data management resources Easy mapping of data between computer systems and exchange documents Lower costs associated with migration to (for example) service-oriented architecture (SOA) Mitigation of data risk Better control of dangers associated with privacy, legal, errors, etc. Assignment of each data element to a person sometimes seems like an unimportant process. But multiple groups have found that users have greater trust and usage rates in systems where they can contact a person with questions on each data element. == Examples == Delft University of Technology (TU Delft) offers an example of data stewardship implementation at a research institution. In 2017 the Data Stewardship Project was initiated at TU Delft to address research data management needs in a disciplinary manner across the whole campus. Dedicated data stewards with subject-specific background were appointed at every TU Delft faculty to support researchers with data management questions and to act as a linking point with the other institutional support services. The project is coordinated centrally by TU Delft Library, and it has its own website, blog and a YouTube channel. The [1]EPA metadata registry furnishes an example of data stewardship. Note that each data element therein has a "POC" (point of contact). In 2023, ETH Zurich launched the Data Stewardship Network (DSN) to facilitate collaboration among employees engaged in data management, analysis, and code development across research groups. The DSN serves as a platform for networking and knowledge exchange, aiming to professionalize the role of data stewards who support research data management and reproducible workflows. Established by the team for Research Data Management and Digital Curation at the ETH Library, the DSN collaborates with Scientific IT Services to provide expertise in areas such as storage infrastructure and reproducible workflows. == Data stewardship applications == Information stewardship applications are business solutions used by business users acting in the role of information steward (interpreting and enforcing information governance policy, for example). These developing solutions represent, for the most part, an amalgam of a number of disparate, previously IT-centric tools already on the market, but are organized and presented in such a way that information stewards (a business role) can support the work of information policy enforcement as part of their normal, business-centric, day-to-day work in a range of use cases. The initial push for the formation of this new category of packaged software came from operational use cases — that is, use of business data in and between transactional and operational business applications. This is where most of the master data management efforts are undertaken in organizations. However, there is also now a faster-growing interest in the new data lake arena for more analytical use cases.

    Read more →
  • Data recovery

    Data recovery

    In computing, data recovery is a process of retrieving deleted, inaccessible, lost, corrupted, damaged, or overwritten data from secondary storage, removable media or files, when the data stored in them cannot be accessed in a usual way. The data is most often salvaged from storage media such as internal or external hard disk drives (HDDs), solid-state drives (SSDs), USB flash drives, magnetic tapes, CDs, DVDs, RAID subsystems, and other electronic devices. Recovery may be required due to physical damage to the storage devices or logical damage to the file system that prevents it from being mounted by the host operating system (OS). Logical failures occur when the hard drive devices are functional but the user or automated-OS cannot retrieve or access data stored on them. Logical failures can occur due to corruption of the engineering chip, lost partitions, firmware failure, or failures during formatting/re-installation. Data recovery can be a very simple or technical challenge. This is why there are specific software companies specialized in this field that help to get back data on your system. == About == The most common data recovery scenarios involve an operating system failure, malfunction of a storage device, logical failure of storage devices, accidental damage or deletion, etc. (typically, on a single-drive, single-partition, single-OS system), in which case the ultimate goal is simply to copy all important files from the damaged media to another new drive. This can be accomplished using a Live CD, or DVD by booting directly from a ROM or a USB drive instead of the corrupted drive in question. Many Live CDs or DVDs provide a means to mount the system drive and backup drives or removable media, and to move the files from the system drive to the backup media with a file manager or optical disc authoring software. Such cases can often be mitigated by disk partitioning and consistently storing valuable data files (or copies of them) on a different partition from the replaceable OS system files. Another scenario involves a drive-level failure, such as a compromised file system or drive partition, or a hard disk drive failure. In any of these cases, the data is not easily read from the media devices. Depending on the situation, solutions involve repairing the logical file system, partition table, or master boot record, or updating the firmware or drive recovery techniques ranging from software-based recovery of corrupted data, to hardware- and software-based recovery of damaged service areas (also known as the hard disk drive's "firmware"), to hardware replacement on a physically damaged drive which allows for the extraction of data to a new drive. If a drive recovery is necessary, the drive itself has typically failed permanently, and the focus is rather on a one-time recovery, salvaging whatever data can be read. In a third scenario, files have been accidentally "deleted" from a storage medium by the users. Typically, the contents of deleted files are not removed immediately from the physical drive; instead, references to them in the directory structure are removed, and thereafter space the deleted data occupy is made available for later data overwriting. In the mind of end users, deleted files cannot be discoverable through a standard file manager, but the deleted data still technically exists on the physical drive. In the meantime, the original file contents remain, often several disconnected fragments, and may be recoverable if not overwritten by other data files. The term "data recovery" is also used in the context of forensic applications or espionage, where data which have been encrypted, hidden, or deleted, rather than damaged, are recovered. Sometimes data present in the computer gets encrypted or hidden due to reasons like virus attacks which can only be recovered by some computer forensic experts. == Physical damage == A wide variety of failures can cause physical damage to storage media, which may result from human errors and natural disasters. CD-ROMs can have their metallic substrate or dye layer scratched off; hard disks can suffer from a multitude of mechanical failures, such as head crashes, PCB failure, and failed motors; tapes can simply break. Physical damage to a hard drive, even in cases where a head crash has occurred, does not necessarily mean permanent data loss. However, in extreme cases, such as prolonged exposure to moisture and corrosion —like the lost Bitcoin hard drive of James Howells, buried in the Newport landfill for over a decade — recovery is usually impossible. In rare cases, forensic techniques such as magnetic force microscopy (MFM) have been explored to detect residual magnetic traces when data holds exceptional value. Other techniques employed by many professional data recovery companies can typically salvage most, if not all, of the data that had been lost when the failure occurred. Of course, there are exceptions to this, such as cases where severe damage to the hard drive platters may have occurred. However, if the hard drive can be repaired and a full image or clone created, then the logical file structure can be rebuilt in most instances. Most physical damage cannot be repaired by end users. For example, opening a hard disk drive in a normal environment can allow airborne dust to settle on the platter and become caught between the platter and the read/write head. During normal operation, read/write heads float 3 to 6 nanometers above the platter surface, and the average dust particles found in a normal environment are typically around 30,000 nanometers in diameter. When these dust particles get caught between the read/write heads and the platter, they can cause new head crashes that further damage the platter and thus compromise the recovery process. Furthermore, end users generally do not have the hardware or technical expertise required to make these repairs. Consequently, data recovery companies are often employed to salvage important data with the more reputable ones using class 100 dust- and static-free cleanrooms. === Recovery techniques === Recovering data from physically damaged hardware can involve multiple techniques. Some damage can be repaired by replacing parts in the hard disk. This alone may make the disk usable, but there may still be logical damage. A specialized disk-imaging procedure is used to recover every readable bit from the surface. Once this image is acquired and saved on a reliable medium, the image can be safely analyzed for logical damage and will possibly allow much of the original file system to be reconstructed. ==== Hardware repair ==== A common misconception is that a damaged printed circuit board (PCB) may be simply replaced during recovery procedures by an identical PCB from a healthy drive. While this may work in rare circumstances on hard disk drives manufactured before 2003, it will not work on newer drives. Electronics boards of modern drives usually contain drive-specific adaptation data (generally a map of bad sectors and tuning parameters) and other information required to properly access data on the drive. Replacement boards often need this information to effectively recover all of the data. The replacement board may need to be reprogrammed. Some manufacturers (Seagate, for example) store this information on a serial EEPROM chip, which can be removed and transferred to the replacement board. Each hard disk drive has what is called a system area or service area; this portion of the drive, which is not directly accessible to the end user, usually contains drive's firmware and adaptive data that helps the drive operate within normal parameters. One function of the system area is to log defective sectors within the drive; essentially telling the drive where it can and cannot write data. The sector lists are also stored on various chips attached to the PCB, and they are unique to each hard disk drive. If the data on the PCB do not match what is stored on the platter, then the drive will not calibrate properly. In most cases the drive heads will click because they are unable to find the data matching what is stored on the PCB. == Logical damage == The term "logical damage" refers to situations in which the error is not a problem in the hardware and requires software-level solutions. === Corrupt partitions and file systems, media errors === In some cases, data on a hard disk drive can be unreadable due to damage to the partition table or file system, or to (intermittent) media errors. In the majority of these cases, at least a portion of the original data can be recovered by repairing the damaged partition table or file system using specialized data recovery software such as TestDisk; software like ddrescue can image media despite intermittent errors, and image raw data when there is partition table or file system damage. This type of data recovery can be performed by people without expertise in drive hardware as it requires no special physica

    Read more →
  • Be My Eyes

    Be My Eyes

    Be My Eyes is a Danish mobile app that aims to help blind and visually impaired people to recognize objects and manage everyday situations. An online community of sighted volunteers receive photos or videos from randomly assigned affected individuals and assist via live chat. In 2023, the company launched Be My AI, an AI-based interface to help blind and visually impaired users describe images. The app is currently available for Android, iOS, and Windows. == History == === Founding and early years === The app was developed and marketed by Hans Jørgen Wiberg. He had demonstrated that although there are video chat software such as Skype and FaceTime, none is tailored for the visually impaired. For development, he joined forces with the Danish Association of the Blind, and other organizations. The app was first presented at an event for start-up companies in 2012 and first released in 2015. A version for Android was released in 2017, in addition to the iOS version. Praise was given for easy use of the app. The lack of sufficient data protection, which makes it possible to pass on data to third parties, was criticized. === Recent developments === The company has raised over $650,000, including funding from Silicon Valley, Microsoft, and other angel investors. In February 2020, $2.8 million in Series A funding was raised, allowing the company to further develop its business model while keeping visual support services free for visually impaired users. The investment allows the company to further develop its unique "purpose and profit" business model while keeping the visual support service free and unlimited for all visually impaired users. === User base and accessibility === Over 9.3 million volunteers and 900,000 blind or visually impaired people use the app. == Features == === Human-based assistance === A visually impaired person starts a live stream showing their view from their cellphone camera. They are assigned, through a phone call or chat, a random volunteer who speaks the same language and who is in the same time zone. This allows the volunteer to describe an object and assist the visually impaired person, such as guiding the person to move their camera, read instructions, or clean up a spill. Through speech synthesis, content can be read out loud. This process encourages a more independent life for blind and visually impaired people. === Be My AI === In March of 2023, Be My Eyes launched Be My AI, an AI-based virtual assistant. Be My AI is accessible through the Be My Eyes app, and is based on OpenAI's GPT-4 large language model. Through the interface, the app allows blind and visually impaired users to send images from a variety of devices to be described. The app allows users to then follow up with questions to further tailor the image description. Blind users report using Be My AI for a variety of tasks, including reading menus, identifying clothing, and describing people. The Be My AI interface is available on Android, iOS, and Windows. Within a few weeks of the interface's roll out, the company reported that it had been used one million times, and it was named among Time's best inventions of 2023. Be My AI is part of a growing number of AI-based apps and devices designed to help blind and visually impaired individuals. == Partnerships == === Microsoft === In November 2023, Be My Eyes entered a partnership with Microsoft to share data to help improve accessibility-focused AI models. === Meta === In 2024, Be My Eyes integrated with Ray-Ban Meta smart glasses, a wearable product developed by Meta and EssilorLuxottica. The partnership enabled users to receive hands-free, real-time visual descriptions and volunteer assistance by using voice commands through the smart glasses. === Hilton === In October 2024, Hilton partnered with Be My Eyes to provide live video assistance for blind and low-vision guests. The free service connects travelers to a Hilton team member that can guide them through tasks like adjusting thermostats, opening window shades, or navigating hotel amenities. This collaboration progressed from a prior arrangement where Hilton helped train Be My Eyes' GPT-4 powered AI model to better recognize objects and layouts in hotel rooms. === Tesco === In October 2025, retailer Tesco announced its partnership with Be My Eyes to launch a six-month pilot aimed at improving in-store accessibility in the UK. The initiative was launched on World Sight Day, 9 October, enabling Be My Eyes users to connect directly with Tesco staff via the app for personalised visual assistance while shopping, Euronewsweek reported. == Awards == Nordic Startup Awards for "Best Social Entrepreneurial Tech Startup" in Denmark 2021 Apple Design Award for best social impact

    Read more →
  • Unknown key-share attack

    Unknown key-share attack

    As defined by Blake-Wilson & Menezes (1999), an unknown key-share (UKS) attack on an authenticated key agreement (AK) or authenticated key agreement with key confirmation (AKC) protocol is an attack whereby an entity A {\displaystyle A} ends up believing she shares a key with B {\displaystyle B} , and although this is in fact the case, B {\displaystyle B} mistakenly believes the key is instead shared with an entity E ≠ A {\displaystyle E\neq A} . In other words, in a UKS, an opponent, say Eve, coerces honest parties Alice and Bob into establishing a secret key where at least one of Alice and Bob does not know that the secret key is shared with the other. For example, Eve may coerce Bob into believing he shares the key with Eve, while he actually shares the key with Alice. The “key share” with Alice is thus unknown to Bob.

    Read more →
  • Sentiment analysis

    Sentiment analysis

    Sentiment analysis (also known as opinion mining) is the use of natural language processing, text analysis, computational linguistics, and biometrics to systematically identify, extract, quantify, and study affective states and subjective information. Sentiment analysis is widely applied to voice of the customer materials such as reviews and survey responses, online and social media, and healthcare materials for applications that range from marketing to customer service to clinical medicine. With the rise of deep language models, such as RoBERTa, more difficult data domains can be analyzed, e.g., news texts where authors typically express their opinion/sentiment less explicitly. == Types == A basic task in sentiment analysis is classifying the polarity of a given text at the document, sentence, or feature/aspect level—whether the expressed opinion in a document, a sentence or an entity feature/aspect is positive, negative, or neutral. Advanced, "beyond polarity" sentiment classification looks, for instance, at emotional states such as enjoyment, anger, disgust, sadness, fear, and surprise. Precursors to sentimental analysis include the General Inquirer, which provided hints toward quantifying patterns in text and, separately, psychological research that examined a person's psychological state based on analysis of their verbal behavior. Subsequently, the method described in a patent by Volcani and Fogel, looked specifically at sentiment and identified individual words and phrases in text with respect to different emotional scales. A current system based on their work, called EffectCheck, presents synonyms that can be used to increase or decrease the level of evoked emotion in each scale. Many other subsequent efforts were less sophisticated, using a mere polar view of sentiment, from positive to negative, such as work by Turney, and Pang who applied different methods for detecting the polarity of product reviews and movie reviews respectively. This work is at the document level. One can also classify a document's polarity on a multi-way scale, which was attempted by Pang and Snyder among others: Pang and Lee expanded the basic task of classifying a movie review as either positive or negative to predict star ratings on either a 3- or a 4-star scale, while Snyder performed an in-depth analysis of restaurant reviews, predicting ratings for various aspects of the given restaurant, such as the food and atmosphere (on a five-star scale). First steps to bringing together various approaches—learning, lexical, knowledge-based, etc.—were taken in the 2004 AAAI Spring Symposium where linguists, computer scientists, and other interested researchers first aligned interests and proposed shared tasks and benchmark data sets for the systematic computational research on affect, appeal, subjectivity, and sentiment in text. Even though in most statistical classification methods, the neutral class is ignored under the assumption that neutral texts lie near the boundary of the binary classifier, several researchers suggest that, as in every polarity problem, three categories must be identified. Moreover, it can be proven that specific classifiers such as the Max Entropy and SVMs can benefit from the introduction of a neutral class and improve the overall accuracy of the classification. There are in principle two ways for operating with a neutral class. Either, the algorithm proceeds by first identifying the neutral language, filtering it out and then assessing the rest in terms of positive and negative sentiments, or it builds a three-way classification in one step. This second approach often involves estimating a probability distribution over all categories (e.g. naive Bayes classifiers as implemented by the NLTK). Whether and how to use a neutral class depends on the nature of the data: if the data is clearly clustered into neutral, negative and positive language, it makes sense to filter the neutral language out and focus on the polarity between positive and negative sentiments. If, in contrast, the data are mostly neutral with small deviations towards positive and negative affect, this strategy would make it harder to clearly distinguish between the two poles. A different method for determining sentiment is the use of a scaling system whereby words commonly associated with having a negative, neutral, or positive sentiment are given an associated number on a −10 to +10 scale (most negative up to most positive) or simply from 0 to a positive upper limit such as +4. This makes it possible to adjust the sentiment of a given term relative to its environment (usually on the level of the sentence). When a piece of unstructured text is analyzed using natural language processing, each concept in the specified environment is given a score based on the way sentiment words relate to the concept and its associated score. This allows movement to a more sophisticated understanding of sentiment, because it is now possible to adjust the sentiment value of a concept relative to modifications that may surround it. Words, for example, that intensify, relax or negate the sentiment expressed by the concept can affect its score. Alternatively, texts can be given a positive and negative sentiment strength score if the goal is to determine the sentiment in a text rather than the overall polarity and strength of the text. There are various other types of sentiment analysis, such as aspect-based sentiment analysis, grading sentiment analysis (positive, negative, neutral), multilingual sentiment analysis and detection of emotions. === Subjectivity/objectivity identification === This task is commonly defined as classifying a given text (usually a sentence) into one of two classes: objective or subjective. This problem can sometimes be more difficult than polarity classification. The subjectivity of words and phrases may depend on their context and an objective document may contain subjective sentences (e.g., a news article quoting people's opinions). Moreover, as mentioned by Su, results are largely dependent on the definition of subjectivity used when annotating texts. However, Pang showed that removing objective sentences from a document before classifying its polarity helped improve performance. Subjective and objective identification, emerging subtasks of sentiment analysis to use syntactic, semantic features, and machine learning knowledge to identify if a sentence or document contains facts or opinions. Awareness of recognizing factual and opinions is not recent, having possibly first presented by Carbonell at Yale University in 1979. The term objective refers to the incident carrying factual information. Example of an objective sentence: 'To be elected president of the United States, a candidate must be at least thirty-five years of age.' The term subjective describes the incident contains non-factual information in various forms, such as personal opinions, judgment, and predictions, also known as 'private states'. In the example down below, it reflects a private states 'We Americans'. Moreover, the target entity commented by the opinions can take several forms from tangible product to intangible topic matters stated in Liu (2010). Furthermore, three types of attitudes were observed by Liu (2010), 1) positive opinions, 2) neutral opinions, and 3) negative opinions. Example of a subjective sentence: 'We Americans need to elect a president who is mature and who is able to make wise decisions.' This analysis is a classification problem. Each class's collections of words or phrase indicators are defined for to locate desirable patterns on unannotated text. For subjective expression, a different word list has been created. Lists of subjective indicators in words or phrases have been developed by multiple researchers in the linguist and natural language processing field states in Riloff et al. (2003). A dictionary of extraction rules has to be created for measuring given expressions. Over the years, in subjective detection, the features extraction progression from curating features by hand to automated features learning. At the moment, automated learning methods can further separate into supervised and unsupervised machine learning. Patterns extraction with machine learning process annotated and unannotated text have been explored extensively by academic researchers. However, researchers recognized several challenges in developing fixed sets of rules for expressions respectably. Much of the challenges in rule development stems from the nature of textual information. Six challenges have been recognized by several researchers: 1) metaphorical expressions, 2) discrepancies in writings, 3) context-sensitive, 4) represented words with fewer usages, 5) time-sensitive, and 6) ever-growing volume. Metaphorical expressions. The text contains metaphoric expression may impact on the performance on the extraction. Besides, metaphors take in different forms, which may have been contribu

    Read more →
  • Sysomos

    Sysomos

    Sysomos Inc. is a Toronto-based social media analytics company owned by Outside Insight market leaders Meltwater. The company developed text analytics and machine learning technologies for user generated content, and served 80% of the top agencies and Fortune 500. == History == Sysomos was founded by Nilesh Bansal and Nick Koudas. The company is a spinoff of the University of Toronto research project BlogScope. The BlogScope project, which started in 2005, resulted in creation of the underlying content aggregation and analysis engine commercialized by Sysomos. The company raised venture capital in 2008 and was acquired by Marketwire in 2010. The company's original flagship product, Media Analysis Platform (MAP), mines and analyzes content from social media or user-generated content to create a picture of media coverage. Sysomos launched its flagship offering MAP in Sept 2007, followed by addition of Heartbeat to its product suite in 2009. In addition to the two main products, the company released FourWhere, a free location-based social search service that mashes up Foursquare in March 2010. The company also offers Sysomos Heartbeat which provides social media monitoring and engagement capabilities to communication professionals, brand managers and customer support groups. In 2013, Heartbeat was extended to add publishing components to deliver a complete end-to-end social media marketing platform. On July 6, 2010, it was announced that Marketwire, a press release distribution company, had acquired Sysomos. After the acquisition, Sysomos founders Nick Koudas and Nilesh Bansal, left Sysomos to start Aislelabs. In February 2015, Sysomos split from Marketwired, as an independent company, and appointed Adnan Ahmed as the new CEO. In March 2015, newly independent Sysomos launched a redesign for its Heartbeat product and a new API for its MAP product. In the same year, the company acquired Expion. In September 2016, Peter Heffring was announced as the new CEO. In April 2017, Sysomos showcased a new unified platform offering new insights. In April 2018, media monitoring firm Meltwater announced it had acquired Sysomos. The CEO of Sysomos, Peter Heffring, said the company will continue to operate as an independent unit of Meltwater. Heffring will run the social analytics division of Meltwater. == Reports == Inside Twitter series of reports is the most extensive third-party survey on Twitter's growth and demographics. Another extensive survey regarding the top 5% of most active Twitter users found that over 25% of all tweets are machine created. The report also confirms Twitter's international growth. Inside Facebook Pages report found that only four percent of pages have more than 10,000 fans, 0.76% of pages have more than 100,000 fans, and 0.05% of pages (or 297 in total) have more than a million fans. Inside YouTube reports focus more on video hosting services and YouTube.

    Read more →
  • Control engineering

    Control engineering

    Control engineering, also known as control systems engineering and, in some European countries, automation engineering, is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls overlaps and is usually taught along with electrical engineering, chemical engineering and mechanical engineering at many institutions around the world. The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems. == Overview == Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering. Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a proportional–integral–derivative controller (PID controller) system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved. Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors. == History == Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788. In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis. Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes. Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today. === Mathematical modelling === David Quinn Mayne, (1930–2024) was among the early developers of a rigorous mathematical method for analysing Model predictive control algorithms (MPC). It is currently used in tens of thousands of applications and is a core part of the advanced control technology by hundreds of process control producers. MPC's major strength is its capacity to deal with nonlinearities and hard constraints in a simple and intuitive fashion. His work underpins a class of algorithms that are probably correct, heuristically explainable, and yield control system designs which meet practically important objectives. == Control systems == == Control theory == == Education == At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering, and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield or the Department of Robotics and Control Engineering at the United States Naval Academy and the Department of Control and Automation Engineering at the Istanbul Technical University. Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which req

    Read more →
  • Data deduplication

    Data deduplication

    In computing, data deduplication is a technique for eliminating duplicate copies of repeating data. Successful implementation of the technique can improve storage utilization, which may in turn lower capital expenditure by reducing the overall amount of storage media required to meet storage capacity needs. It can also be applied to network data transfers to reduce the number of bytes that must be sent. The deduplication process requires comparison of data 'chunks' (also known as 'byte patterns') which are unique, contiguous blocks of data. These chunks are identified and stored during a process of analysis, and compared to other chunks within existing data. Whenever a match occurs, the redundant chunk is replaced with a small reference that points to the stored chunk. Given that the same byte pattern may occur dozens, hundreds, or even thousands of times (the match frequency is dependent on the chunk size), the amount of data that must be stored or transferred can be greatly reduced. A related technique is single-instance (data) storage, which replaces multiple copies of content at the whole-file level with a single shared copy. While possible to combine this with other forms of data compression and deduplication, it is distinct from newer approaches to data deduplication (which can operate at the segment or sub-block level). Deduplication is different from data compression algorithms, such as LZ77 and LZ78. Whereas compression algorithms identify redundant data inside individual files and encodes this redundant data more efficiently, the intent of deduplication is to inspect large volumes of data and identify large sections – such as entire files or large sections of files – that are identical, and replace them with a shared copy. == Functioning principle == For example, a typical email system might contain 100 instances of the same 1 MB (megabyte) file attachment. Each time the email platform is backed up, all 100 instances of the attachment are saved, requiring 100 MB storage space. With data deduplication, only one instance of the attachment is actually stored; the subsequent instances are referenced back to the saved copy for deduplication ratio of roughly 100 to 1. Deduplication is often paired with data compression for additional storage saving: Deduplication is first used to eliminate large chunks of repetitive data, and compression is then used to efficiently encode each of the stored chunks. In computer code, deduplication is done by, for example, storing information in variables so that they don't have to be written out individually but can be changed all at once at a central referenced location. Examples are CSS classes and named references in MediaWiki. == Benefits == Storage-based data deduplication reduces the amount of storage needed for a given set of files. It is most effective in applications where many copies of very similar or even identical data are stored on a single disk. In the case of data backups, which routinely are performed to protect against data loss, most data in a given backup remain unchanged from the previous backup. Common backup systems try to exploit this by omitting (or hard linking) files that haven't changed or storing differences between files. Neither approach captures all redundancies, however. Hard-linking does not help with large files that have only changed in small ways, such as an email database; differences only find redundancies in adjacent versions of a single file (consider a section that was deleted and later added in again, or a logo image included in many documents). In-line network data deduplication is used to reduce the number of bytes that must be transferred between endpoints, which can reduce the amount of bandwidth required. See WAN optimization for more information. Virtual servers and virtual desktops benefit from deduplication because it allows nominally separate system files for each virtual machine to be coalesced into a single storage space. At the same time, if a given virtual machine customizes a file, deduplication will not change the files on the other virtual machines—something that alternatives like hard links or shared disks do not offer. Backing up or making duplicate copies of virtual environments is similarly improved. == Classification == === Post-process versus in-line deduplication === Deduplication may occur "in-line", as data is flowing, or "post-process" after it has been written. With post-process deduplication, new data is first stored on the storage device and then a process at a later time will analyze the data looking for duplication. The benefit is that there is no need to wait for the hash calculations and lookup to be completed before storing the data, thereby ensuring that store performance is not degraded. Implementations offering policy-based operation can give users the ability to defer optimization on "active" files, or to process files based on type and location. One potential drawback is that duplicate data may be unnecessarily stored for a short time, which can be problematic if the system is nearing full capacity. Alternatively, deduplication hash calculations can be done in-line: synchronized as data enters the target device. If the storage system identifies a block which it has already stored, only a reference to the existing block is stored, rather than the whole new block. The advantage of in-line deduplication over post-process deduplication is that it requires less storage and network traffic, since duplicate data is never stored or transferred. On the negative side, hash calculations may be computationally expensive, thereby reducing the storage throughput. However, certain vendors with in-line deduplication have demonstrated equipment which performs in-line deduplication at high rates. Post-process and in-line deduplication methods are often heavily debated. === Data formats === The SNIA Dictionary identifies two methods: Content-agnostic data deduplication – a data deduplication method that does not require awareness of specific application data formats. Content-aware data deduplication – a data deduplication method that leverages knowledge of specific application data formats. === Source versus target deduplication === Another way to classify data deduplication methods is according to where they occur. Deduplication occurring close to where data is created, is referred to as "source deduplication". When it occurs near where the data is stored, it is called "target deduplication". Source deduplication ensures that data on the data source is deduplicated. This generally takes place directly within a file system. The file system will periodically scan new files creating hashes and compare them to hashes of existing files. When files with same hashes are found then the file copy is removed and the new file points to the old file. Unlike hard links however, duplicated files are considered to be separate entities and if one of the duplicated files is later modified, then using a system called copy-on-write a copy of that changed file or block is created. The deduplication process is transparent to the users and backup applications. Backing up a deduplicated file system will often cause duplication to occur resulting in the backups being bigger than the source data. Source deduplication can be declared explicitly for copying operations, as no calculation is needed to know that the copied data is in need of deduplication. This leads to a new form of link on file systems, called a reference-counted link, or reflink, in some systems (e.g. Linux), or a cloned file on macOS, where one or more inodes (file information entries) are made to share some or all of their data. It is named analogously to hard links, which work at the inode level, and symbolic links, which work at the filename level.The individual entries have a copy-on-write behavior that is non-aliasing, i.e. changing one copy afterwards will not affect other copies. Microsoft's ReFS also supports this operation. Target deduplication is the process of removing duplicates when the data was not generated at that location. Example of this would be a server connected to a SAN/NAS, The SAN/NAS would be a target for the server (target deduplication). The server is not aware of any deduplication, the server is also the point of data generation. A second example would be backup. Generally this will be a backup store such as a data repository or a virtual tape library. === Deduplication methods === One of the most common forms of data deduplication implementations works by comparing chunks of data to detect duplicates. For that to happen, each chunk of data is assigned an identification, calculated by the software, typically using cryptographic hash functions. In many implementations, the assumption is made that if the identification is identical, the data is identical, even though this cannot be true in all cases due to the pigeonhole principle; other implementations do not as

    Read more →
  • Data security

    Data security

    Data security or data protection is the process of securing digital information to protect it from online threats. Data security or protection means protecting digital data, such as those in a database, from destructive forces and from the unwanted actions of unauthorized users, such as a cyberattack or a data breach. Data security protects computer hardware, software, storage devices, and the data of user devices. Data security also protects the data of organizations, companies and administrative controls. Data security guarantees the protection of individual data, such as identity documents and bank data, and protects against unauthorized access, theft and loss of individual data. Data security also protects data breaches that occurs in companies and industries. Good security measures in industries reduce the probability of data breaches, and employees can rely on the company with their data and private information to be kept secured while companies can continue to maintain a stable reputation. The CIA Triad (Confidentiality, Integrity, and Availability) is what is used to practice what an information security is required to follow. Confidentiality, protects information from being accessed by unauthorized persons. Integrity, makes sure data is trustworthy; and Availability, meaning that data can be accessed by approved users when it is needed; are three goals for data security. Non-repudiation in data security definition, is a device/service that shows where the data originated from and the proof of integrity. == Technologies == === Disk encryption === Disk encryption refers to encryption technology that encrypts data on a hard disk drive. It takes data from a storage device and coverts it into an unreadable format. Disk encryption typically takes form in either software (see disk encryption software) or hardware (see disk encryption hardware) which can be used together. Disk encryption is often referred to as on-the-fly encryption (OTFE) or transparent encryption. Full disk encryption encrypts each individual sector of a disk volume. Files and user data are encrypted to hinder unauthorized users from accessing without a decryption key. A diversifier permits a plaintext of a specific disk sector to be encrypted into different ciphertexts, which does not require additional storage, such as an initialization vector (IV) or message authentication code (MAC). === Software versus hardware-based mechanisms for protecting data === Software-based security solutions encrypt the data to protect it from theft. However, a malicious program or a hacker could corrupt the data to make it unrecoverable, making the system unusable. Hardware-based security solutions prevent read and write access to data, which provides very strong protection against tampering and unauthorized access. Hardware-based security or assisted computer security offers an alternative to software-only computer security. Security tokens such as those using PKCS#11 or a mobile phone may be more secure due to the physical access required in order to be compromised. Access is enabled only when the token is connected and the correct PIN is entered (see two-factor authentication). However, dongles can be used by anyone who can gain physical access to it. Newer technologies in hardware-based security solve this problem by offering full proof of security for data. Working off hardware-based security: A hardware device allows a user to log in, log out and set different levels through manual actions. Many devices use biometric technology to prevent malicious users from logging in, logging out, and changing privilege levels. The current state of a user of the device is read by controllers in peripheral devices such as hard disks. Illegal access by a malicious user or a malicious program is interrupted based on the current state of a user by hard disk and DVD controllers making illegal access to data impossible. Hardware-based access control is more secure than the protection provided by the operating systems as operating systems are vulnerable to malicious attacks by viruses and hackers. The data on hard disks can be corrupted after malicious access is obtained. With hardware-based protection, the software cannot manipulate the user privilege levels. A hacker or a malicious program cannot gain access to secure data protected by hardware or perform unauthorized privileged operations. This assumption is broken only if the hardware itself is malicious or contains a backdoor. The hardware protects the operating system image and file system privileges from being tampered with. Therefore, a completely secure system can be created using a combination of hardware-based security and secure system administration policies. === Backups === Backup is the process of reproducing copies of essential data and storing in a separate, secured place. It is used to ensure data that is lost can be recovered from another source. Backups contains a minimum of one copy of the data that requires preservation. It is considered essential to keep a backup of any data in most industries and the process is recommended for any files of importance to a user. There are 3 types of backups; full backups, incremental backups, and differential backups. Full backups secure all data from a production system, such as a server, database, or other connected data source. It is impossible to lose all data in a full backup if a breach or corruption were to occur. Full backups require a significantly large amount of time to back up and may be time-consuming taking hours to days to complete. Incremental backups only secures changed data since last backup. While all backups are done in full backups, incremental backups only save data that is recently or frequently changed. Incremental backups require lower storage costs making it a prominent solution for growing datasets. === Data Privacy === Data privacy (or information privacy) is the right for individual's data to be secured to obstruct the use of unauthorized access. It gives individuals control over their data and how it can be shared to third parties. The U.S Privacy Protection Law (see Privacy laws of the United States) requires organizations to inform individuals of how their data is collected and when a data breach occurs. By implementing an encryption, it ensures that private data is unreadable to cybercriminals. === Data masking === Data masking of structured data is the process of obscuring (masking) specific data within a database table or cell to ensure that data security is maintained and sensitive information is not exposed to unauthorized personnel. This may include masking the data from users (for example so banking customer representatives can only see the last four digits of a customer's national identity number), developers (who need real production data to test new software releases but should not be able to see sensitive financial data), outsourcing vendors, etc. Data masking is a form of encryption, as it obscures data by modifying particular letters and numbers to keep data concealed and protected from potential hackers. The individual that has access to the code that decrypts the replaced characters are the only ones that can uncover the data. === Data erasure === Data erasure (or data deletion, data destruction) is a method of software-based overwriting that permanently clears all electronic data residing on a hard drive or other digital media to ensure that no sensitive data is lost when an asset is retired or reused. Article 17: Right to be Forgotten states that users have the right to permanently remove all of their private information from their old devices/services to give people more control over their data. Users are able to switch between devices efficiently. == Threats == === Malware === Malware (or malicious software) is designed to destroy, corrupt or gain unauthorized access to a computer for the purpose of stealing, or destroying data. Hackers who use malware typically utilize many types of malware, which includes computer virus, computer worms, ransomware, spyware and Trojan horse to create a vast system of disruption and cause easy data theft. One of the victims of the vast system of disruption includes healthcare workers, who are targeted by compromised systems by infections and then having their data attacked. === Phishing === Phishing is a type of scam that allows hackers to hoax people using psychological and social engineering (using human emotions such as their trust and fear) tactics into giving personal data through emails and messages, and install computer viruses if the individual were to click on a malicious link unknowingly. Attackers are able to create websites that are very similar to original websites, which makes it difficult to detect a fake website, causing individuals to fall for giving in information. Phishing attackers use human emotion to exploit them, such as making them feel fear, urgency, sympathy with the message

    Read more →
  • KLJN Secure Key Exchange

    KLJN Secure Key Exchange

    Random-resistor-random-temperature Kirchhoff-law-Johnson-noise key exchange, also known as RRRT-KLJN or simply KLJN, is an approach for distributing cryptographic keys between two parties that claims to offer unconditional security. This claim, which has been contested, is significant, as the only other key exchange approach claiming to offer unconditional security is Quantum key distribution. The KLJN secure key exchange scheme was proposed in 2005 by Laszlo Kish and Granqvist. It has the advantage over quantum key distribution in that it can be performed over a metallic wire with just four resistors, two noise generators, and four voltage measuring devices---equipment that is low-priced and can be readily manufactured. It has the disadvantage that several attacks against KLJN have been identified which must be defended against. "Given that the amount of effort and funding that goes into Quantum Cryptography is substantial (some even mock it as a distraction from the ultimate prize which is quantum computing), it seems to me that the fact that classic thermodynamic resources allow for similar inherent security should give one pause," wrote Henning Dekant, the founder of the Quantum Computing Meetup, in April 2013. The Cybersecurity Curricula 2017, a joint project of the Association for Computing Machinery, the IEEE Computer Society, the Association for Information Systems, and the International Federation for Information Processing Technical Committee on Information Security Education (IFIP WG 11.8) recommends teaching the KLJN Scheme as part of teaching "Advanced concepts" in its knowledge unit on cryptography. == See Also/Further Reading ==

    Read more →
  • Bazaart

    Bazaart

    Bazaart is an AI-powered design platform with image and video editing capabilities for iOS, Android, MacOS, and the web. == History == Bazaart was founded in 2012 in Israel. In April 2012, Bazaart launched a Facebook app called Pinvolve, which converts Facebook Pages into Pinterest pinboards. From June to August 2012, it participated in the DreamIt startup accelerator in New York and raised $25,000 from the accelerator. In July 2012, it launched its first version as an iPad app connected to Pinterest. In December 2013, it pivoted and launched a major version of its app, a "social" photoshop that allowed users to edit images which could be pulled in from the camera roll, social networks, and other sources. In July 2014, Bazaart reached one million downloads and in December was selected by Apple as Best of 2014. In 2015, Bazaart added Photoshop integration in a partnership with Adobe. In September 2020, Bazaart launched an Android app. In December 2020, Bazaart was selected by Google as Best of 2020. In January 2022, Bazaart added video editing capabilities. In 2023, the platform added AI-powered backgrounds and video background removal features.

    Read more →
  • Peñabot

    Peñabot

    Peñabot is the nickname for automated social media accounts allegedly used by the Mexican government of Enrique Peña Nieto and the PRI political party to keep unfavorable news from reaching the Mexican public. Peñabot accusations are related to the broader issue of fake news in the 21st century. == History of disinformation in Mexican politics == The PRI political party has been reported to use fake news since before Peña Nieto. The main tactic originally was to spread such propaganda through open radio and television networks. Such tactic was effective in Mexico, because newspaper readership is low and cable TV is largely limited to the middle classes; consequently, the country's two major television networks – Televisa and TV Azteca – exert a significant influence in national politics. Televisa itself, not only owns around two-thirds of the programming on Mexico's TV channels, making it not only Mexico's largest television network, but also is the largest media network in the Spanish-speaking world. == Peñabots == Analysts have given the name Peñabots to a suspected network of automated accounts on social media used by the Mexican government to spread pro-government propaganda and to marginalize dissenting opinions in social media. The bots were first noticed in the 2012 elections when they were used to disseminate opinions in support of Enrique Peña Nieto on social networks such as Twitter and Facebook. According to Aristegui Noticias, their usage went against articles 6 and 134 of the Mexican Constitution. Those used by Peña Nieto's government cost an estimated 80 million pesos monthly, which news outlets argued only helped the government spread fake support towards the president, but did not have a benefit towards Mexican people (with whom EPN was highly unpopular). Facebook held approximately 640,321 Peñabots, while Twitter had less. As of July 2017, Oxford Internet Institute's Computational Propaganda Research Project claimed many western democracies, Mexico included, perform social media manipulation, thus saying the manipulation comes directly from the Mexican government itself. During Peña Nieto's subsequent presidency, analysts noted that Peñabots were used to overpower trending topics that critiqued government, to flood trending government critical hashtags with spam, to create fake trends by pushing alternative hashtags, and to push smear campaigns and threats against government-critical activists and journalists. Peñabots were distinguished as their pattern of activity was distinct from that of ordinary interaction on social networks. === Meadebots === On Twitter it was reported that about 94% of the followers of 2018 presidential candidate from the PRI Jose Antonio Meade were bots. When Antonio Meade presented himself as a candidate for the 2018 presidential election, his social media accounts such as "@MovimientoMEADE" (created by the PRI's official account @PRI_Nacional), obtained a huge quantity of followers in a short span of time. Some users noticed and brought it to attention, and after investigation it was reported 94% of such followers were bots (702,000 out of 747,000), and the account was eliminated from Twitter after 20 hours. The fake accounts used the hashtags #YoConMeade and #Meade18. It was further revealed was that Meade's official account on Twitter, @JoseAMeadeK had 25% bots (216,000 fake followers out of the 981,000). == Manipulation of news media in Mexico, through television == The Mexican government of Peña Nieto has been accused of using various means to keep unfavorable news from reaching the Mexican people. Many Mexicans have protested this practice as it clearly goes against the freedom of speech. The PRI has been reported to use fake news since before Peña Nieto. The main tactic has been to spread such propaganda through radio and television. This tactic is perceived as effective in Mexico, because newspaper readership is low and research on the Internet and cable TV is largely limited to the middle classes; consequently, the country's two major television networks – Televisa and TV Azteca – exert a significant influence in national politics. Televisa itself, owns around two-thirds of the programming on Mexico's TV channels, making it not only Mexico's largest television network, but also is the largest media network in the Spanish-speaking world. In June 2012, before the 2012 Mexican presidential elections, the British newspaper The Guardian published a series of allegations claiming Televisa, sold favorable coverage to top politicians in its news and entertainment shows, this scandal became known as the Televisa controversy. The documents published by 'The Guardian alleged that a secretive circle within Televisa manipulated news coverage to favor PRI presidential candidate Enrique Peña Nieto, who was poised as favorite to win. Televisa's secret circle supposedly commissioned videos to promote Peña Nieto and lash out his political rivals in 2009. The Guardian documents suggest that Televisa's secret team distributed such videos through e-mail, posting them posted them on Facebook and YouTube, some can still be seen there. Another document was a PowerPoint presentation, with a slide explicitly aimed at rival leftist candidate of the Party of the Democratic Revolution (PRD), Andrés Manuel López Obrador. Supposedly given to The Guardian by a Televisa employee. The document's authenticity was never possible to confirm– however dates, names, and events largely coincide. Televisa refused to talk the documents, and denied a relationship with the PRI or its presidential candidate, saying that they had provided equal media coverage to all parties. Televisa published an article supposedly showing discrepancies in The Guardian documents and denying accusations. Mexican citizens complained about the perceived favoritism towards Enrique Peña Nieto and the PRI, protesting through the Yo Soy 132 movement which Televisa covered in detail. However, Televisa's news media coverage is perceived to have been biased, by using a media coverage tactic Mexican citizens call cortinas de humo (smoke screens). These introduce a news scandal giving extensive coverage to distract citizens from a potential conflict-of-interest or controversy that could damage the image of the politician favored by the network. An example of a perceived smoke screen would be the news media coverage of "Caso Michoacán" and "Caso Paolette" distracting all the attention from the parallel "Yo soy 132" movement. A few years later, on the day of September 11, 2016; factual evidence of Televisa's performing media manipulation emerged, when a Televisa news anchor while live-on air reading a teleprompter, mistakenly read out loud that "try that Jaime "Ël Bronco" Rodríguez Calderón (Nuevo Leon's governor) is mentioned as little as possible". Newspaper El Universal caught it on video and published it social media. Televisa didn't mention the story and declined to comment. Lack of news coverage concerning Nuevo León's Governor Jaime Rodriguez, is perceived due to him being the first elected governor to not be part of any political party (Independent Governor), and because unlike the governors from the PRI preceding him, the independent governor "El Bronco" doesn't spend money on publicity at all, preferring to communicate all news by using social media such as Twitter and Facebook. While the incident may have proven Televisa's bias, there wasn't anything to incriminate the PRI political party or Enrique Peña Nieto, though it did further suspicion of Televisa manipulating news media. In contrast, a December 2017 article of The New York Times, reported Enrique Peña Nieto spending about 2000 million dollars on publicity, during his first 5 years as president, the largest publicity budget ever spent by a Mexican President. Additionally, 68 percent of news journalists admitted to not believe to have enough freedom of speech, and award-winning news reporter Carmen Aristegui was controversially fired shortly after revealing the Mexican White House scandals. == Violence and spying towards news journalists and civil rights activists == Far for only being receiving accusations of spreading fake news, the Mexican government of EPN (Enrique Peña Nieto) has also been accused of violence towards news journalists, and of spying on them, and also towards civil right leaders and their families. During his tenure as president, Peña Nieto has been accused of failing to protect news journalists, whose deaths are speculated to be politically triggered, by politicians attempting to prevent them from covering political scandals. The New York Times published a news report on the matter titled, "In Mexico it's easy to kill a journalist", on it mentioning how during EPN's government, Mexico became one of the worst countries on which to be a journalist. The assassination of journalist Javier Valdez on May 23, 2017, received national coverage, with multiple news journalists

    Read more →
  • Private message

    Private message

    In computer networking, a private message (PM), or direct message (DM), refers to a private communication, often text-based, sent or received by a user of a private communication channel on any given platform. Unlike public posts, PMs are only viewable by the participants. Long a function present on IRCs and Internet forums, private channels for PMs have also been prevalent features on instant messaging (IM) and on social media networks. It may be either synchronous (e.g. on an IM) or asynchronous (e.g. on an Internet forum). The term private message (PM) originated as a feature on internet forums, while the term direct message (DM) originated as a feature on Twitter. Due to the popularity of the latter service, DM has since been appropriated by other platforms, such as Instagram, and is often genericized in popular usage. == Overview == There are two main types of private messages, and one obscure type: One type includes those found on IRCs and Internet forums, as well as on social media services like Twitter, Facebook, and Instagram, where the focus is public posting, PMs allow users to communicate privately without leaving the platform. The second type are those relayed through instant messaging platforms such as WhatsApp and Snapchat, where users join the networks primarily to exchange PMs. A third type, peer-to-peer messaging, occurs when users create and own the infrastructure used to transmit and store the messages; while features vary depending on application, they give the user full control over the data they transmit. An example of software that enables this kind of messaging is Classified-ads. Besides serving as a tool to connect privately with friends and family, PMs have gained momentum in the workplace. Working professionals use PMs to reach coworkers in other spaces and increase efficiency during meetings. Although useful, using PMs in the workplace may blur the boundary between work and private lives. Some common forms of private messaging today include Facebook messaging (sometimes referred to as "inboxing"), Twitter direct messaging, and Instagram direct messaging. These forms of private messaging provide a private space on a usually public site. For instance, most activity on Twitter is public, but Twitter DMs provide a private space for communication between two users. This differs from mediums like email, texting, and Snapchat, where most or all activity is always private. Modern forms of private messaging may include multimedia messages, such as pictures or videos. == History == Email was first developed to send messages between different computers on ARPANET in 1971. Access to ARPANET was primarily limited to universities and other research institutions. Starting in 1983 or 1984, FidoNet allowed home computer users to send and receive email via bulletin board systems. Information services such as CompuServe, America Online, and Prodigy also helped to popularizes online messaging. The advent of the public World Wide Web in 1993 increased access to email via internet service providers, and later via webmail. Instant messaging systems became popular in the mid 1990s, as Internet access improved and personal computers became more common. The introduction of Skype in 2003 popularized Internet-based voice and video messaging. Direct messaging is now a feature of all major social networking services. == Privacy concerns == In January 2014, Matthew Campbell and Michael Hurley filed a class-action lawsuit against Facebook for breaching the Electronic Communications Privacy Act. They alleged that private messages which contained URLs were being read and used to generate profit, through data mining and user profiling, and that it was misleading for Facebook to refer to the functionality as "private" with the implication that the communication was "free from surveillance". In 2012, some Facebook users misinterpreted a redesign of the Facebook wall as publicly sharing private messages from 2008–2009. These were found to be public wall posts from those years, made at a time when it was not possible to like or comment on a wall post, making the notes look like private messages.

    Read more →