AI For Business Owners Course

AI For Business Owners Course — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

NAPLPS

NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad
Read more →
Non-native speech database

A non-native speech database is a speech database of non-native pronunciations of English. Such databases are used in the development of: multilingual automatic speech recognition systems, text to speech systems, pronunciation trainers, and second language learning systems. == List == The actual table with information about the different databases is shown in Table 2. === Legend === In the table of non-native databases some abbreviations for language names are used. They are listed in Table 1. Table 2 gives the following information about each corpus: The name of the corpus, the institution where the corpus can be obtained, or at least further information should be available, the language which was actually spoken by the speakers, the number of speakers, the native language of the speakers, the total amount of non-native utterances the corpus contains, the duration in hours of the non-native part, the date of the first public reference to this corpus, some free text highlighting special aspects of this database and a reference to another publication. The reference in the last field is in most cases to the paper which is especially devoted to describe this corpus by the original collectors. In some cases it was not possible to identify such a paper. In these cases a paper is referenced which is using this corpus is. Some entries are left blank and others are marked with unknown. The difference here is that blank entries refer to attributes where the value is just not known. Unknown entries, however, indicate that no information about this attribute is available in the database itself. As an example, in the Jupiter weather database no information about the origin of the speakers is given. Therefore this data would be less useful for verifying accent detection or similar issues. Where possible, the name is a standard name of the corpus, for some of the smaller corpora, however, there was no established name and hence an identifier had to be created. In such cases, a combination of the institution and the collector of the database is used. In the case where the databases contain native and non-native speech, only attributes of the non-native part of the corpus are listed. Most of the corpora are collections of read speech. If the corpus instead consists either partly or completely of spontaneous utterances, this is mentioned in the Specials column.
Read more →
Afghan Girls Robotics Team

The Afghan Girls Robotics Team, also known as the Afghan Dreamers, is an all-girl robotics team from Herat, Afghanistan, founded through the Digital Citizen Fund (DCF) in 2017 by Roya Mahboob and Alireza Mehraban. It is made up of girls between ages 12 and 18 and their mentors. Several members of the team were relocated to Qatar and Mexico by humanitarian and tech entrepreneur Sarah Porter following the fall of Kabul in August 2021. A documentary film featuring members of the team, titled Afghan Dreamers, was released by MTV Documentary Films in 2023. == Origins == The Afghan Girls Robotics Team was co-founded in 2017 by Roya Mahboob, who is their coach, mentor and sponsor, and founder of the Digital Citizen Fund (DCF), which is the parent organization for the team. Dean Kamen was planning a 2017 competition in the United States and had recruited Mahboob to form a team from Afghanistan. Out of 150 girls, 12 were selected for the first team. Before parts were sent by Kamen, they trained in the basement of the home of Mahboob's parents, with scrap metal and without safety equipment under the guidance of their coach, Mahboob's brother Alireza Mehraban, who is also a co-founder of the team. == 2017 and 2018 == In 2017, six members of the Afghan Girls Robotics Team traveled to the United States to participate in the international FIRST Global Challenge robotics competition. Their visas were rejected twice after they made two journeys from Herat to Kabul through Taliban-controlled areas, before officials in the United States government intervened to allow them to enter the United States. Customs officials also detained their robotics kits, which left them two weeks to construct their robot, unlike some teams that had more time. They were awarded a Silver medal for Courageous Achievement. One week after they returned home from the competition, the father of team captain Fatemah Qaderyan, Mohammad Asif Qaderyan, was killed in a suicide bombing. After their United States visas expired, the team participated in competitions in Estonia and Istanbul. Three of the 12 members participated in the 2017 Entrepreneurial Challenge at the Robotex festival in Estonia, and won the competition for their solar-powered robot designed to assist farmers. In 2018, the team trained in Canada, continued to travel in the United States for months and participate in competitions. == 2019 == The Afghan Girls Robotics team had aspirations to develop a science and technology school for girls in Afghanistan. Roya Mahboob interfaced with the School of Engineering and Applied Sciences (SEAS), the School of Architecture, and the Whitney and Betty MacMillan Center for International and Area Studies Yale University to design the infrastructure for what they named The Dreamer Institute. == 2020 == In March 2020, the governor of Herat at the time, in response to the COVID-19 pandemic in Afghanistan and a scarcity of ventilators, sought help with the design of low-cost ventilators, and the Afghan Girls Robotics Team was one of six teams contacted by the government. Using a design from Massachusetts Institute of Technology and with guidance from MIT engineers and Douglas Chin, a surgeon in California, the team developed a prototype with Toyota Corolla parts and a chain drive from a Honda motorcycle. UNICEF also supported the team with the acquisition of necessary parts during the three months they spent building the prototype that was completed in July 2020. Their design costs around $500 compared to $50,000 for a ventilator. In December 2020, Minister of Industry and Commerce Nizar Ahmad Ghoryani donated funding and obtained land for a factory to produce the ventilators. Under the direction of their mentor Roya Mahboob, the Afghan Dreamers also designed a UVC Robot for sanitization, and a Spray Robot for disinfection, both of which were approved by the Ministry of Health for production. == 2021 == In early August 2021, Somaya Faruqi, former captain of the team, was quoted by Public Radio International about the future of Afghanistan, stating, "We don’t support any group over another but for us what’s important is that we be able to continue our work. Women in Afghanistan have made a lot of progress over the past two decades and this progress must be respected." On August 17, 2021, the Afghan Girls Robotics Team and their coaches were reported to be attempting to evacuate, but unable to obtain a flight out of Afghanistan, and a lawyer appealed to Canada for assistance regarding the evacuation of the team members. As of August 19, 2021, nine members of the team and their coaches had evacuated to Qatar. The founder of the team, Roya Mahboob, and DCF board member, Elizabeth Schaeffer Brown, were previously in contact with the Qatari government to assist the team members in their evacuation from Afghanistan. By August 25, 2021, some members arrived in Mexico. Saghar, a team member who evacuated to Mexico, said, "We wanted to continue the path that we started to continue to go for our achievements and to go for having our dreams through reality. So that's why we decided to leave Afghanistan and go for somewhere safe" in an interview with The Associated Press. The members who have left Afghanistan participated in an online robotics competition in September and plan to continue their education. A documentary film titled Afghan Dreamers, produced by Beth Murphy and directed by David Greenwald, was in post-production when the team began to evacuate. == 2022 == The Afghan Dreamers were involved in a training program at the Texas A&M University at Qatar’s STEM Hub. == 2023 == The Afghan Girls Robotics Team had a booth at the 5th UN Conference on the Least Developed Countries, where they displayed some of the robots the team had constructed. == Afghan Dreamers documentary == The Afghan Dreamers documentary from MTV Documentary Films premiered in May 2023 on Paramount+. The film was directed by David Greenwald and produced by David Cowan and Beth Murphy. In a review for Screen Daily, Wendy Ide wrote, "This film, with its likeable cast of girl nerds and positive message, should enjoy a warm reception on the festival circuit, and will be of particular interest to events seeking to showcase women's stories from around the world. It also serves as a timely cautionary tale – a case study on just how quickly the rights and the opportunities of women can be curtailed, at the behest of the men in power." == Honors and awards == 2017 Silver medal for Courageous Achievement at the FIRST Global Challenge, science and technology 2017 Benefiting Humanity in AI Award at World Summit AI 2017 Winner, Entrepreneurship Challenge at Robotex in Estonia 2018 Permission to Dream Award, Raw Film Festival 2018 Conrad Innovation Challenge, Raw Film Festival 2018 Rookie All Star – District Championship, Canada 2018 Asia Game Changer Award Honoree 2019 Inspiring in Engineering Award – FIRST Detroit World Championship 2019 Asia Game Changer Award of California 2019 Safety Award – FIRST Global, Dubai 2021 Forbes 30 Under 30 Asia 2022 World Championships, Genoa, Switzerland
Read more →
Anti-Grain Geometry

Anti-Grain Geometry (AGG) is a 2D rendering graphics library written in C++. It features anti-aliasing and sub-pixel resolution. It is not a graphics library, per se, but rather a framework to build a graphics library upon. The library is operating system independent and renders to an abstract memory object. It comes with examples interfaced to the X Window System, Microsoft Windows, Mac OS X, AmigaOS, BeOS, SDL. The examples also include an SVG viewer. The design of AGG uses C++ templates only at a very high level, rather than extensively, to achieve the flexibility to plug custom classes into the rendering pipeline, without requiring a rigid class hierarchy, and allows the compiler to inline many of the method calls for high performance. For a library of its complexity, it is remarkably lightweight: it has no dependencies above the standard C++ libraries and it avoids the C++ STL in the implementation of the basic algorithms. The implicit interfaces are not well documented, however, and this can make the learning process quite cumbersome. While AGG version 2.5 is licensed under the GNU General Public License, version 2 or greater, AGG version 2.4 is still available under the 3-clause BSD license and is virtually the same as version 2.5. == History == Active development of the AGG codebase stalled in 2006, around the time of the v2.5 release, due to shifting priorities of its main developer and maintainer Maxim Shemanarev. M. Shemanarev remained active in the community until his sudden death in 2013. Development has continued on a fork of the more liberally licensed v2.4 on SourceForge.net. == Usage == The Haiku operating system uses AGG in its windowing system. It is one of the renderers available for use in GNU's Gnash Flash player. Graphical version of Rebol language interpreter is using AGG for scalable vector graphics DRAW dialect. Hilti uses it in some of their rebar detection tools, like the PS 1000. Matplotlib uses AGG as its canonical renderer for interactive user interfaces. fpGUI Toolkit has an optional AggPas back-end rendering engine. Work is being done to make AggPas the default or sole rendering engine for fpGUI. Mapnik, the toolkit that renders the maps on the OpenStreetMap website, uses AGG for all its bitmap map rendering by default. HTTPhotos uses AGG to scale photos. Pdfium, the PDF rendering engine used by Google Chrome makes use of AGG, although work is progressing to replace this with Skia Graphics Engine. Graphics Mill, the .NET imaging SDK uses AGG as its drawing engine. Image-Line FL Studio, a digital audio workstation, since version 10.8 released on September 30, 2012, uses AGG for drawing. Native Instruments's Supercharger and Supercharger GT compressors use AGG for its user interface. == Author == The main author of the library was Maxim Shemanarev (Russian: Максим Шеманарёв). On November 26, 2013 Shemanarev (born June 15, 1966, Nizhny Novgorod, Russia) was reported dead at the age of 47 at his home in Columbia, Maryland (US). He died suddenly, allegedly from an epileptic seizure that he had suffered for a while. He was a graduate from Nizhny Novgorod State Technical University. Little is known about his personal life. It's known though that he was divorced and his mother was alive at the time of his death. He used to love skiing, snowboarding (in Colorado), and inline skating. He was praised by his friends for his intelligent programming skills.
Read more →
Scene text

Scene text is text that appears in an image captured by a camera in an outdoor environment. The detection and recognition of scene text from camera captured images are computer vision tasks which became important after smart phones with good cameras became ubiquitous. The text in scene images varies in shape, font, colour and position. The recognition of scene text is further complicated sometimes by non-uniform illumination and focus. To improve scene text recognition, the International Conference on Document Analysis and Recognition (ICDAR) conducts a robust reading competition once in two years. The competition was held in 2003, 2005 and during every ICDAR conference. International association for pattern recognition (IAPR) has created a list of datasets as Reading systems. == Text detection == Text detection is the process of detecting the text present in the image, followed by surrounding it with a rectangular bounding box. Text detection can be carried out using image based techniques or frequency based techniques. In image based techniques, an image is segmented into multiple segments. Each segment is a connected component of pixels with similar characteristics. The statistical features of connected components are utilised to group them and form the text. Machine learning approaches such as support vector machine and convolutional neural networks are used to classify the components into text and non-text. In frequency based techniques, discrete Fourier transform (DFT) or discrete wavelet transform (DWT) are used to extract the high frequency coefficients. It is assumed that the text present in an image has high frequency components and selecting only the high frequency coefficients filters the text from the non-text regions in an image. == Word recognition == In word recognition, the text is assumed to be already detected and located and the rectangular bounding box containing the text is available. The word present in the bounding box needs to be recognized. The methods available to perform word recognition can be broadly classified into top-down and bottom-up approaches. In the top-down approaches, a set of words from a dictionary is used to identify which word suits the given image. Images are not segmented in most of these methods. Hence, the top-down approach is sometimes referred as segmentation free recognition. In the bottom-up approaches, the image is segmented into multiple components and the segmented image is passed through a recognition engine. Either an off the shelf Optical character recognition (OCR) engine or a custom-trained one is used to recognise the text.
Read more →
Graphics suite

A graphics suite is a software suite for graphics work that are distributed together. The programs are usually able to interact with each other on a higher level than the operating system would normally allow. There is no hard, fast rule regarding the programs to be included in a graphics application suite, but most will include at least a bitmap graphics editor and a vector graphics editor. In addition to these, the suite may contain VRML editors, animation editors, and morphing tools.
Read more →
Oversampled binary image sensor

An oversampled binary image sensor is an image sensor with non-linear response capabilities reminiscent of traditional photographic film. Each pixel in the sensor has a binary response, giving only a one-bit quantized measurement of the local light intensity. The response function of the image sensor is non-linear and similar to a logarithmic function, which makes the sensor suitable for high dynamic range imaging. == Working principle == Before the advent of digital image sensors, photography, for the most part of its history, used film to record light information. At the heart of every photographic film are a large number of light-sensitive grains of silver-halide crystals. During exposure, each micron-sized grain has a binary fate: Either it is struck by some incident photons and becomes "exposed", or it is missed by the photon bombardment and remains "unexposed". In the subsequent film development process, exposed grains, due to their altered chemical properties, are converted to silver metal, contributing to opaque spots on the film; unexposed grains are washed away in a chemical bath, leaving behind the transparent regions on the film. Thus, in essence, photographic film is a binary imaging medium, using local densities of opaque silver grains to encode the original light intensity information. Thanks to the small size and large number of these grains, one hardly notices this quantized nature of film when viewing it at a distance, observing only a continuous gray tone. The oversampled binary image sensor is reminiscent of photographic film. Each pixel in the sensor has a binary response, giving only a one-bit quantized measurement of the local light intensity. At the start of the exposure period, all pixels are set to 0. A pixel is then set to 1 if the number of photons reaching it during the exposure is at least equal to a given threshold q. One way to build such binary sensors is to modify standard memory chip technology, where each memory bit cell is designed to be sensitive to visible light. With current CMOS technology, the level of integration of such systems can exceed 109~1010 (i.e., 1 giga to 10 giga) pixels per chip. In this case, the corresponding pixel sizes (around 50~nm ) are far below the diffraction limit of light, and thus the image sensor is oversampling the optical resolution of the light field. Intuitively, one can exploit this spatial redundancy to compensate for the information loss due to one-bit quantizations, as is classic in oversampling delta-sigma converters. Building a binary sensor that emulates the photographic film process was first envisioned by Fossum, who coined the name digital film sensor (now referred to as a quanta image sensor). The original motivation was mainly out of technical necessity. The miniaturization of camera systems calls for the continuous shrinking of pixel sizes. At a certain point, however, the limited full-well capacity (i.e., the maximum photon-electrons a pixel can hold) of small pixels becomes a bottleneck, yielding very low signal-to-noise ratios (SNRs) and poor dynamic ranges. In contrast, a binary sensor whose pixels need to detect only a few photon-electrons around a small threshold q has much less requirement for full-well capacities, allowing pixel sizes to shrink further. == Imaging model == === Lens === Consider a simplified camera model shown in Fig.1. The λ 0 ( x ) {\displaystyle \lambda _{0}(x)} is the incoming light intensity field. By assuming that light intensities remain constant within a short exposure period, the field can be modeled as only a function of the spatial variable x {\displaystyle x} . After passing through the optical system, the original light field λ 0 ( x ) {\displaystyle \lambda _{0}(x)} gets filtered by the lens, which acts like a linear system with a given impulse response. Due to imperfections (e.g., aberrations) in the lens, the impulse response, a.k.a. the point spread function (PSF) of the optical system, cannot be a Dirac delta, thus, imposing a limit on the resolution of the observable light field. However, a more fundamental physical limit is due to light diffraction. As a result, even if the lens is ideal, the PSF is still unavoidably a small blurry spot. In optics, such diffraction-limited spot is often called the Airy disk, whose radius R a {\displaystyle R_{a}} can be computed as R a = 1.22 w f , {\displaystyle R_{a}=1.22\,wf,} where w {\displaystyle w} is the wavelength of the light and f {\displaystyle f} is the F-number of the optical system. Due to the lowpass (smoothing) nature of the PSF, the resulting λ ( x ) {\displaystyle \lambda (x)} has a finite spatial-resolution, i.e., it has a finite number of degrees of freedom per unit space. === Sensor === Fig.2 illustrates the binary sensor model. The s m {\displaystyle s_{m}} denote the exposure values accumulated by the sensor pixels. Depending on the local values of s m {\displaystyle s_{m}} , each pixel (depicted as "buckets" in the figure) collects a different number of photons hitting on its surface. y m {\displaystyle y_{m}} is the number of photons impinging on the surface of the m {\displaystyle m} th pixel during an exposure period. The relation between s m {\displaystyle s_{m}} and the photon count y m {\displaystyle y_{m}} is stochastic. More specifically, y m {\displaystyle y_{m}} can be modeled as realizations of a Poisson random variable, whose intensity parameter is equal to s m {\displaystyle s_{m}} , As a photosensitive device, each pixel in the image sensor converts photons to electrical signals, whose amplitude is proportional to the number of photons impinging on that pixel. In a conventional sensor design, the analog electrical signals are then quantized by an A/D converter into 8 to 14 bits (usually the more bits the better). But in the binary sensor, the quantizer is 1 bit. In Fig.2, b m {\displaystyle b_{m}} is the quantized output of the m {\displaystyle m} th pixel. Since the photon counts y m {\displaystyle y_{m}} are drawn from random variables, so are the binary sensor output b m {\displaystyle b_{m}} . === Spatial and temporal oversampling === If it is allowed to have temporal oversampling, i.e., taking multiple consecutive and independent frames without changing the total exposure time τ {\displaystyle \tau } , the performance of the binary sensor is equivalent to the sensor with same number of spatial oversampling under certain condition. It means that people can make trade off between spatial oversampling and temporal oversampling. This is quite important, since technology usually gives limitation on the size of the pixels and the exposure time. == Advantages over traditional sensors == Due to the limited full-well capacity of conventional image pixel, the pixel will saturate when the light intensity is too strong. This is the reason that the dynamic range of the pixel is low. For the oversampled binary image sensor, the dynamic range is not defined for a single pixel, but a group of pixels, which makes the dynamic range high. == Reconstruction == One of the most important challenges with the use of an oversampled binary image sensor is the reconstruction of the light intensity λ ( x ) {\displaystyle \lambda (x)} from the binary measurement b m {\displaystyle b_{m}} . Maximum likelihood estimation can be used for solving this problem. Fig. 4 shows the results of reconstructing the light intensity from 4096 binary images taken by single photon avalanche diodes (SPADs) camera. A better reconstruction quality with fewer temporal measurements and faster, hardware friendly implementation, can be achieved by more sophisticated algorithms.
Read more →
Parasolid

Parasolid is a geometric modeling kernel originally developed by Shape Data Limited, now owned and developed by Siemens Digital Industries Software. It can be licensed by other companies for use in their 3D computer graphics software products. Parasolid's abilities include model creation and editing utilities such as Boolean modeling operators, feature modeling support, advanced surfacing, thickening and hollowing, blending and filleting, and sheet modeling. It also incorporates modeling with mesh surfaces and lattices. Parasolid also includes tools for direct model editing, including tapering, offsetting, geometry replacement and removing feature details with automated regeneration of surrounding data. Parasolid also provides wide-ranging graphical and rendering support, including hidden-line, wireframe and drafting, tessellation, and model data inquiries. To use Parasolid effectively, software developers need knowledge of CAD in general, computational geometry, and topology. Parasolid is available for Windows (32-bit, 64-bit and AArch64), Linux (64-bit and AArch64), macOS (Apple silicon and Intel), iOS, and Android. == Parasolid XT format == Parasolid parts are normally saved in XT format, which usually has the file extension .X_T. The format is documented and open. There is also a binary version of the format, usually with an .X_B extension, which is somewhat more compact. Both .X_T and .X_B are used for parts files. == Applications == It is used in many computer-aided design (CAD), computer-aided manufacturing (CAM), computer-aided engineering (CAE), product visualization, and CAD data exchange packages. Notable uses include:
Read more →
Threat actor

In cybersecurity and risk assessment, a threat actor (or threat agents, attackers, or adversaries) is a person, group, organisation, state, or other entity with the ability to cause, carry, transmit, support, or exploit a threat. Threat actors are commonly analysed according to their motivations, resources, technical capability, access to systems, relationship to a target, and degree of connection to state authority. They may exploit vulnerabilities, conduct social engineering, steal or monetise data, disrupt operations, or support other actors who carry out such activity. Because the term covers a wide range of actors, researchers and security organisations use taxonomies that distinguish between groups such as cybercriminals, state-linked actors, ideologically motivated actors, thrill seekers or trolls, insiders, and competitors. Threat actor classifications are used in risk management, cyber threat intelligence, and incident response to connect observed behaviour with possible objectives and likely future activity. The categories are not always mutually exclusive: the same actor may combine criminal, ideological, commercial, or state-linked motivations, and different organisations may use different names for similar actors. == Risk assessment and security management == In risk assessment, threat actor analysis is used to identify who or what may create, carry, transmit, support, or exploit a threat, and how that actor relates to the system being assessed. Rausand and Haugen classify threat actors by their relationship to the system, distinguishing between internal and external actors, and by intent, distinguishing between intentional and unintentional actors. Threat actor classification may also support incident investigation. Rogers argued that actor categories could be inferred from observable case points, such as tools used, messages left, data targeted, forensic knowledge, and the degree of damage, allowing investigators to assess likely motivation and skill level. Later work similarly linked actor classification to operational analysis. Chng, Lu, Kumar and Yau proposed a framework connecting hacker types, motivations and typical strategies, arguing that observed behaviour before or during an attack can help analysts infer the likely type of actor involved. At the strategic level, actor analysis may consider an actor's resources, capabilities, degree of state involvement, motivations and objectives. == Landscape == The United Nations Institute for Disarmament Research has described the contemporary cyberthreat landscape as involving an increasingly diverse and interconnected set of actors, including state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, private companies and civilian volunteers. Its 2026 report argued that these actors vary in resources, technical sophistication and relationships with states, making it traditional distinctions between state, civilian combatant roles, and legitimate and illegitimate conduct harder to apply. == Academic taxonomies == Early taxonomies classified hackers by activity, skill, motivation, or criminal profile. Landreth proposed six categories based on activity: novice, student, tourist, crasher, and thief. Hollinger classified computer misuse into pirates, browsers, and crackers, describing a progression from less-skilled activity to more technically serious offences. Chantler used attributes including activity, skill, knowledge, motivation, and duration of involvement to distinguish between an elite group, neophytes, and "losers and lamers". Parker proposed seven profiles of cybercriminals: pranksters, hacksters, malicious hackers, personal problem solvers, career criminals, extreme advocates, and malcontents, addicts, and irrational or incompetent people. In 2000, Marc Rogers proposed a taxonomy of hackers with seven, non-mutually-exclusive categories: newbie/tool kit users, cyber-punks, internals, coders, old guard hackers, professional criminals, and cyber-terrorists. Rausand and Haugen distinguish between internal and external threat actors, and between intentional and unintentional threat actors. Internal actors have some relationship with, access to, or position inside the system or organisation, while external actors operate from outside it. Intentional actors seek to create, exploit, or support a threat event, whereas unintentional actors may cause or enable a threat event through error, negligence, accident, or lack of awareness. Rogers later revised his hacker taxonomy into Novices, Cyber-punks, Internals, Petty Thieves, Virus Writers, Old Guard hackers, Professional Criminals, Information Warriors, and, more tentatively, Political Activists. In the model, motivation is grouped into four broad domains: curiosity, notoriety, revenge, and financial gain. A 2022 review by Chng, Lu, Kumar and Yau examined 11 hacker typologies published over three decades and proposed a unified framework linking hacker types, motivations, and strategies. The framework identified 13 hacker types and seven motivations, and argued that observed strategies during an attack can help analysts infer the likely type of actor involved. == Government taxonomies == Taxonomies of threat actors by governments are much more likely to include state-level threat actors. In the United States the National Institute of Standards and Technology (NIST) uses the term threat source in its risk-assessment guidance: organisations are directed to identify and characterise threat sources of concern, including capability, intent and targeting for adversarial threat sources, and the range of effects for non-adversarial threat sources. NIST treats threat-source identification as part of the risk-assessment process, alongside identifying threat events, vulnerabilities, likelihood and impact. In the EU, European Union Agency for Cybersecurity publishes the annual ENISA Threat Landscape, which analyses cyber incidents and adversary behaviour affecting the European Union. The 2025 report analysed selected incidents from the previous year and grouped activity around cybercrime, state-aligned activity, foreign information manipulation and interference, and hacktivism. In ENISA's 2025 analysis, hacktivist activity dominated reporting, representing almost 80% of recorded incidents and consisting mainly of low-level distributed denial-of-service operations. ENISA also reported increasing convergence between hacktivism, cybercrime and state-nexus activity, including state-aligned use of hacktivist personas, hacktivist adoption of ransomware, and false-flag or impersonation activity. At the UN level, A 2026 report by the United Nations Institute for Disarmament Research described the cyberthreat landscape as involving state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, and civilian volunteers, with actors varying in resources, technical sophistication, and links to states. Canada defines threat actors as states, groups, or individuals who aim to cause harm by exploiting a vulnerability with malicious intent. A threat actor must be trying to gain access to information systems to access or alter data, devices, systems, or networks. The Japanese government's National Centre of Incident Readiness and Strategy (NISC) was established in 2015 to create a "free, fair and secure cyberspace" in Japan. The NICS created a cybersecurity strategy in 2018 that outlines nation-states and cybercrime to be some of the most key threats. It also indicates that terrorist usage of the cyberspace needs to be monitored and understood. The Security Council of the Russian Federation published the cyber security strategy doctrine in 2016. This strategy highlights the following threat actors as a risk to cyber security measures: nation-state actors, cyber criminals, and terrorists. == Techniques == Threat actors use techniques like Social engineering (security), and Phishing, alongside technical exploits like Cross-site scripting, SQL injection, and denial-of-service attacks. == Limitations == In practice, actor categories may overlap (Edward Snowden for example), and the same activity may combine features associated with hacktivism, cybercrime and state-linked operations. The lines between hacktivism, cybercrime and state-nexus activity had continued to blur, with shared toolsets, overlapping methods, fake personas, hacktivist adoption of ransomware, and cybercriminal or state-linked actors masquerading as other groups. Threat actor analysis also has limits as a risk-management method. NIST notes that risk assessments depend on their purpose, scope, assumptions, constraints, information sources, risk model and analytic approach, and that assessments are tied to particular time frames and organisational contexts. NIST also warns that simple threat-vulnerability pairing may be undesirable or problematic where there are many threats and vulnerabilities, and recom
Read more →
Articulatory speech recognition

Articulatory speech recognition means the recovery of speech (in forms of phonemes, syllables or words) from acoustic signals with the help of articulatory modeling or an extra input of articulatory movement data. Speech recognition (or automatic speech recognition, acoustic speech recognition) means the recovery of speech from acoustics (sound wave) only. Articulatory information is extremely helpful when the acoustic input is in low quality, perhaps because of noise or missing data. Measurable information from the articulatory system (e.g. tongue, jaw movements) can supplement acoustic signals to improve phone recognition accuracy by 2%. However, attempts to estimate articulatory data from acoustic signals alone have not significantly enhanced recognition performance.
Read more →
Prequel (mobile application)

Prequel, Inc. is an American technology company and mobile app developer known for developing the Prequel mobile application, which enables editing photos and videos with filters and effects generated using artificial intelligence. Prequel was founded in 2018 by Serge Aliseenko and Timur Khabirov, who currently serves as the company's CEO. It is headquartered in New York City. As of August 2022, it had been downloaded more than 100 million times. == History == In 2016, entrepreneur Timur Khabirov and investor Serge Aliseenko registered a US corporation named AIAR Labs Inc, which was developing AR solutions as an outsourced contractor. Of several proprietary products, Prequel was selected for beta-testing as a product focused on editing photos and videos. In 2018, Prequel was released on the Apple App Store. The launch cost $3 million USD, financed with the founders’ personal funds. The first release included approximately 10 filters for photos and the same amount of effects that augmented images with rose petals, rain and snow, VHS and film reel simulations, glitch, grain, sun puddles, and lomography. By June 2020, the app had also been released for Android. In 2021, Prequel founders Timur Khabirov and Serge Aliseenko launched a venture studio for startups working with artificial, computer vision, and AR-based visual art. In December 2022, Prequel reached the number 14 slot on the global rankings for Apple App Store’s Top Charts and the number 5 slot on the App Store’s U.S. charts. In March 2023, Prequel launched a new app called Artique, which is an AI-powered image editing app for businesses. Artique provides advertising and marketing graphic design using ready-made templates that users can customize, while giving suggestions and visual cues through artificial intelligence. Prequel was also one of the companies participating in discussions about artificial intelligence at SXSW 2023. == Features == Prequel describes its app as an "Aesthetic Pic Editor. The app uses artificial intelligence to create and edit content. Prequel can be used to touch up faces on images and videos and can also tie various decorative elements to certain points on the human body and face. Prequel filters include the "Cartoon" filter, which converts selfies into cartoon-style pictures. Other filters include Kidcore, Dust, Grain, Fisheye, Retro Style, Miami, Disco, and VHS-style filters, as well as the ability to create Renaissance-style pictures. Prequel also gives users the ability to apply color correction tools and to make moving images with 3D effects out of 2D images. Prequel allows users to take photos and videos directly through the app and apply filters and effects in real time. The app also comes with manual editing options for photos, such as adjusting the brightness and/or exposure and cropping photos, as well as an option to automatically apply adjustments. The Prequel app uses the Core ML, MNN, and TFLight frameworks to work with its neural networks. Some AI solutions are launched server-side, and some on the user's mobile device. A resulting photo or video edited with the app is called "a prequel." The app daily generates over 2 million such prequels, which are published by users in Instagram, TikTok, and other social media. As of 2022, the app has more than 800 filters and effects, along with video templates and support for GIFs and stickers. Prequel is free-to-use, but has a premium version that gives users access to more effects, filters, and beauty tools. Since its launch in 2018, Prequel has been downloaded more than 100 million times.
Read more →
Construction robots

Construction robots are a subset of industrial robots used for building and infrastructure construction on site, or in the production of materials and components offsite. A 2021 survey said 55% of construction companies in the United States, Europe, and China used robots in some form. This figure, however, reflects reported use across the construction value chain rather than widespread deployment of robots on active construction sites. Real-world adoption remains limited, with many robotic systems confined to pilot projects, controlled environments, or specific task applications rather than continuous on-site construction use. One of the main challenges in deploying robots on construction sites is the unstructured and variable nature of the environment, which differs fundamentally from controlled factory settings where industrial robots have traditionally operated. Some robots currently deployed on job sites assist with physically demanding or repetitive tasks: excavating, lifting heavy materials, surveying, laying out markers, tying rebar, and installing drywall. More advanced systems are being developed for exterior finishing, steel placement, masonry, and reinforced concrete work. In practice, rather than autonomous systems performing core building tasks, the most widely adopted robot applications on construction sites involve technologies such as aerial drones (or, less frequently, robot 'dogs' - for example, Boston Dynamics' Spot - or humanoid robots) used for surveying, inspection, and progress monitoring (the robots typically carry video and/or 360-degree cameras, LiDar scanners or other data capture devices, with data analysed using artificial intelligence and machine learning). Some emerging systems are designed as multifunctional construction robots, integrating multiple tools and capabilities within a single robotic platform to perform different stages of the construction process. These systems aim to improve operational flexibility and increase automation in complex construction environments. Experimental projects using robotic construction technologies and additive manufacturing have been demonstrated in several countries as part of broader efforts to industrialize the construction sector and improve productivity through automation and digitalization. == Features == Construction robots are generally required to meet the following criteria: Mobility: the ability to navigate around a construction site, including uneven terrain and confined spaces. Adaptability: the ability to handle components of variable size, weight, and shape. Environmental awareness: the ability to sense and respond to changing on-site conditions. Interactivity: the ability to operate alongside human workers and other equipment. Multitasking: the ability to perform several different operations within a single deployment. == Capabilities == Construction robots have been developed and tested for a range of on-site tasks, including: Progress monitoring — robots equipped with cameras and sensors can track construction progress and identify deviations from plans. Inspection — robots are used to investigate infrastructure at dangerous or inaccessible locations, reducing risk to human workers and eliminating human error. Wall construction — robotic systems can lay bricks and blocks with greater speed and consistency than manual labour. Earthmoving and material handling — autonomous excavators and haul trucks use GPS, lidar, and motion sensors to perform digging, trenching, and loading tasks with minimal human input. Grading and dozing — autonomous bulldozers use GPS, gyroscopes, and laser sensors to control blade angle and depth, improving surface finish accuracy and reducing material overuse. 3D printing — additive manufacturing systems can construct walls and structural elements directly from digital models. == Notable construction-related activities undertaken by robots == The distribution of robotic applications in construction varies across the project lifecycle. Most applications are concentrated in structural construction tasks such as masonry, concrete work, and assembly, while other phases, including planning, maintenance, and demolition, remain less represented. === Automated building systems === The Nisseki Yokohama Building (also known as Rail City Yokohama), a 30-storey office building in Yokohama, Japan, was constructed between 1994 and 1997 using the SMART system (Shimizu Manufacturing system by Advanced Robotics Technology), developed by Shimizu Corporation and a consortium of seven other Japanese companies. The system used automated horizontal hoists and vertical lifts to position steel beams, columns, precast concrete floor slabs, and prefabricated facade panels, with welding robots connecting structural elements under laser-guided precision. Each component was tracked by barcode to monitor progress and coordinate just-in-time delivery of materials. Obayashi Corporation developed the Advanced Building Construction System (ABCS), a similar automated platform used in several high-rise projects in Japan in the 1990s, including the NEC Head Office in Kanagawa (1997–2000). === Progress monitoring, inspection === Boston Dynamics' Spot was used in February 2024 to inspect sections of the M5 motorway in England for National Highways. A £15,000 humanoid robot (a G1 model from Chinese manufacturer Unitree) was deployed to capture 360-degree imagery and progress reports to support health and safety monitoring and reporting for UK contractor Tilbury Douglas in April 2026. In the US, Virginia Tech's ARCADE research lab is developing MARIO (Multi-Agent Robotic system for Inspection On-site), a heterogenous robotic system deploying multiple robots capable of different locomotion to perform remote real-time construction progress monitoring in complex construction sites. === Earthmoving === === Concrete works === Obayashi Corporation developed and deployed a robotic system for placing concrete layers in dam construction in Japan. A concrete floor finishing robot was deployed by Kajima and Tokimec in Japan. The MARK series were designed in 1984 to automate the levelling and trowelling of concrete slabs on construction sites, providing consistent finishing accuracy, improved efficiency, and reduced dependence on skilled labour === Masonry === SAM100 (Semi-Automated Mason), developed by Construction Robotics, is one of the first commercially available bricklaying robots for on-site masonry construction. In 2018, it was used in the construction of the University Arts Building at the University of Nevada, Reno — a $35.5 million facility — where it laid over 60,000 of the 100,000 bricks required, reducing the brick veneer installation time by approximately 50%. Hadrian X, developed by the Australian company Fastbrick Robotics, is a fully autonomous mobile bricklaying robot. In November 2022, it completed its first commercial project — five four-bedroom houses in Wellard, Western Australia. In February 2025, PulteGroup, one of the largest homebuilders in the United States, piloted Hadrian X on a site in Florida, constructing an entire house in a single day. === 3D printing === In May 2025, a residential building in Arinaga, Gran Canaria, Spain, was completed using 3D printing construction technology, as part of broader efforts to demonstrate robotic and additive manufacturing methods in the housing sector. In 2026, a three-storey apartment block in France was constructed using concrete 3D printing technology, three months faster than conventional building methods. Finland's Hyperion Robotics has opened a UK factory and used 3D printing with concrete to produce foundations for pipelines and for electricity substation bases, reducing time-consuming and weather-dependent onsite construction processes. == Social impact == The adoption of construction robots varies significantly by region and is shaped by labour market conditions, cultural attitudes, and regulatory frameworks. In Japan, construction robots have been embraced as a response to an ageing workforce and chronic labour shortages, and are generally viewed positively by the industry. In the United States, adoption has historically been slower, partly due to resistance from labour unions concerned about job displacement. Research suggests that the impact of automation on workers is uneven: while robots can create a productivity effect that benefits some workers, displacement effects are most pronounced among younger, less-educated workers in manufacturing-heavy regions. More than 60% of construction firms now report difficulty finding skilled operators, which has increased openness to automation as a practical solution to workforce shortages rather than a replacement for workers. In the UK, during onsite deployment of a humanoid robot for monitoring purposes, there were concerns that staff might think they were being watched ("It's not there to spy on people.... So, we insist that everyone is blurred out. N
Read more →
WikiTok

WikiTok is a web application that shows random Wikipedia articles in an infinite scrolling format similar to TikTok. Created by New York-based civil and software engineer Isaac Gemal in February 2025, the application aims to provide an "anti-algorithmic" alternative to traditional social media platforms while combating doomscrolling. == Development == WikiTok was developed on February 3, 2025, after Gemal saw a viral tweet from developer Tyler Angert proposing "all of wikipedia on a single, scrollable page". Gemal created the initial prototype in approximately two hours, using the Claude LLM and Cursor coding editor, completing it by 2 a.m. that same night. The application was built with React 18, TypeScript, Tailwind CSS, and Vite, consisting of only a few hundred lines of code with no backend infrastructure. Gemal has made the project open-source, with the code publicly available on GitHub. == Functionality == WikiTok serves users completely random Wikipedia article snippets from Wikipedia's nearly 9.5 million entries. Each article preview includes a full-screen image from Wikipedia and a short text excerpt. Users can click "Read More" to access the full Wikipedia article, or continue scrolling to see the next random entry. The application functions as a progressive web app that can be downloaded as a hybrid between an app and a website. It works on both mobile and desktop browsers, and is designed to be responsive whether users scroll with their thumb on mobile devices or use a cursor on desktop computers. As of 2025, WikiTok supports 14 different languages for article translation. == Philosophy == Gemal has explicitly positioned WikiTok as "anti-algorithmic," resisting numerous requests to implement personalized content algorithms. In an interview with Business Insider, Gemal stated: "I have had plenty of people message me and even make issues on my GitHub asking for some insane crazy WikiTok algorithm... we're already ruled by ruthless, opaque algorithms in our everyday life; why can't we just have one little corner in the world without them?" The application aims to combat "doomscrolling" – the practice of mindlessly consuming negative news online that can cause anxiety, helplessness, and anger. Unlike traditional social media platforms, WikiTok deliberately excludes algorithms, advertisements, and user tracking.
Read more →
Super-resolution optical fluctuation imaging

Super-resolution optical fluctuation imaging (SOFI) is a post-processing method for the calculation of super-resolved images from recorded image time series that is based on the temporal correlations of independently fluctuating fluorescent emitters. SOFI has been developed for super-resolution of biological specimen that are labelled with independently fluctuating fluorescent emitters (organic dyes, fluorescent proteins). In comparison to other super-resolution microscopy techniques such as STORM or PALM that rely on single-molecule localization and hence only allow one active molecule per diffraction-limited area (DLA) and timepoint, SOFI does not necessitate a controlled photoswitching and/ or photoactivation as well as long imaging times. Nevertheless, it still requires fluorophores that are cycling through two distinguishable states, either real on-/off-states or states with different fluorescence intensities. In mathematical terms SOFI-imaging relies on the calculation of cumulants, for what two distinguishable ways exist. For one thing an image can be calculated via auto-cumulants that by definition only rely on the information of each pixel itself, and for another thing an improved method utilizes the information of different pixels via the calculation of cross-cumulants. Both methods can increase the final image resolution significantly although the cumulant calculation has its limitations. Actually SOFI is able to increase the resolution in all three dimensions. == Principle == Likewise to other super-resolution methods SOFI is based on recording an image time series on a CCD- or CMOS camera. In contrary to other methods the recorded time series can be substantially shorter, since a precise localization of emitters is not required and therefore a larger quantity of activated fluorophores per diffraction-limited area is allowed. The pixel values of a SOFI-image of the n-th order are calculated from the values of the pixel time series in the form of a n-th order cumulant, whereas the final value assigned to a pixel can be imagined as the integral over a correlation function. The finally assigned pixel value intensities are a measure of the brightness and correlation of the fluorescence signal. Mathematically, the n-th order cumulant is related to the n-th order correlation function, but exhibits some advantages concerning the resulting resolution of the image. Since in SOFI several emitters per DLA are allowed, the photon count at each pixel results from the superposition of the signals of all activated nearby emitters. The cumulant calculation now filters the signal and leaves only highly correlated fluctuations. This provides a contrast enhancement and therefore a background reduction for good measure. As it is implied in the figure on the left the fluorescence source distribution: ∑ k = 1 N δ ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) {\displaystyle \sum _{k=1}^{N}\delta ({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t)} is convolved with the system's point spread function (PSF) U(r). Hence the fluorescence signal at time t and position r → {\displaystyle {\vec {r}}} is given by F ( r → , t ) = ∑ k = 1 N U ( r → − r → k ) ⋅ ε k ⋅ s k ( t ) . {\displaystyle F({\vec {r}},t)=\sum _{k=1}^{N}U({\vec {r}}-{\vec {r}}_{k})\cdot \varepsilon _{k}\cdot s_{k}(t).} Within the above equations N is the amount of emitters, located at the positions r → k {\displaystyle {\vec {r}}_{k}} with a time-dependent molecular brightness ε k ⋅ s k {\displaystyle \varepsilon _{k}\cdot s_{k}} where ε k {\displaystyle \varepsilon _{k}} is a variable for the constant molecular brightness and s k ( t ) {\displaystyle s_{k}(t)} is a time-dependent fluctuation function. The molecular brightness is just the average fluorescence count-rate divided by the number of molecules within a specific region. For simplification it has to be assumed that the sample is in a stationary equilibrium and therefore the fluorescence signal can be expressed as a zero-mean fluctuation: δ F ( r → , t ) = F ( r → , t ) − ⟨ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=F({\vec {r}},t)-\langle F({\vec {r}},t)\rangle _{t}} where ⟨ ⋯ ⟩ t {\displaystyle \langle \cdots \rangle _{t}} denotes time-averaging. The auto-correlation here e.g. the second-order can then be described deductively as follows for a certain time-lag τ {\displaystyle \tau } : δ F ( r → , t ) = ⟨ δ F ( r → , t + τ ) ⋅ δ F ( r → , t ) ⟩ t {\displaystyle \delta F({\vec {r}},t)=\langle \delta F({\vec {r}},t+\tau )\cdot \delta F({\vec {r}},t)\rangle _{t}} From these equations it follows that the PSF of the optical system has to be taken to the power of the order of the correlation. Thus in a second-order correlation the PSF would be reduced along all dimensions by a factor of 2 {\displaystyle {\sqrt {2}}} . As a result, the resolution of the SOFI-images increases according to this factor. === Cumulants versus correlations === Using only the simple correlation function for a reassignment of pixel values, would ascribe to the independency of fluctuations of the emitters in time in a way that no cross-correlation terms would contribute to the new pixel value. Calculations of higher-order correlation functions would suffer from lower-order correlations for what reason it is superior to calculate cumulants, since all lower-order correlation terms vanish. == Cumulant-calculation == === Auto-cumulants === For computational reasons it is convenient to set all time-lags in higher-order cumulants to zero so that a general expression for the n-th order auto-cumulant can be found: A C n ( r → , τ 1 … n − 1 = 0 ) = ∑ k = 1 N U n ( r → − r → k ) ε k n w k ( 0 ) {\displaystyle AC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\sum _{k=1}^{N}U^{n}({\vec {r}}-{\vec {r}}_{k})\varepsilon _{k}^{n}w_{k}(0)} w k {\displaystyle w_{k}} is a specific correlation based weighting function influenced by the order of the cumulant and mainly depending on the fluctuation properties of the emitters. Albeit there is no fundamental limitation in calculating very high orders of cumulants and thereby shrinking the FWHM of the PSF there are practical limitations according to the weighting of the values assigned to the final image. Emitters with a higher molecular brightness will show a strong increase in terms of the pixel cumulant value assigned at higher-orders as well as this performance can be expected from a diverse appearance of fluctuations of different emitters. A wide intensity range of the resulting image can therefore be expected and as a result dim emitters can get masked by bright emitters in higher-order images:. The calculation of auto-cumulants can be realized in a very attractive way in a mathematical sense. The n-th order cumulant can be calculated with a basic recursion from moments K n ( r → ) = μ n ( r → ) − ∑ i = 1 n − 1 ( n − 1 i ) K n − i ( r → ) μ i ( r → ) {\displaystyle K_{n}({\vec {r}})=\mu _{n}({\vec {r}})-\sum _{i=1}^{n-1}{\begin{pmatrix}n-1\\i\end{pmatrix}}K_{n-i}({\vec {r}})\mu _{i}({\vec {r}})} where K is a cumulant of the index's order, likewise μ {\displaystyle \mu } represents the moments. The term within the brackets indicates a binomial coefficient. This way of computation is straightforward in comparison with calculating cumulants with standard formulas. It allows for the calculation of cumulants with only little time of computing and is, as it is well implemented, even suitable for the calculation of high-order cumulants on large images. === Cross-cumulants === In a more advanced approach cross-cumulants are calculated by taking the information of several pixels into account. Cross-cumulants can be described as follows: C C n ( r → , τ 1 … n − 1 = 0 ) = ∏ j < l n U ( r → j − r → l n ) ⋅ ∑ i = 1 N U n ( r → i − ∑ k n r → k n ) ε i n w i ( 0 ) {\displaystyle CC_{n}({\vec {r}},\tau _{1\ldots n-1}=0)=\prod _{j Read more →
Signal transfer function

The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}
Read more →