AI For Business Research

AI For Business Research — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Autognostics

  Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware. It is considered one of the major components of Autonomic Networking. == Introduction == One of the most important characteristics of today's Internet that has contributed to its success is its basic design principle: a simple and transparent core with intelligence at the edges (the so-called "end-to-end principle"). Based on this principle, the network carries data without knowing the characteristics of that data (e.g., voice, video, etc.) - only the end-points have application-specific knowledge. If something goes wrong with the data, only the edge may be able to recognize that since it knows about the application and what the expected behavior is. The core has no information about what should happen with that data - it only forwards packets. Although an effective and beneficial attribute, this design principle has also led to many of today's problems, limitations, and frustrations. Currently, it is almost impossible for most end-users to know why certain network-based applications do not work well and what they need to do to make it better. Also, network operators who interact with the core in low-level terms such as router configuration have problems expressing their high-level goals into low-level actions. In high-level terms, this may be summarized as a weak coupling between the network and application layers of the overall system. As a consequence of the Internet end-to-end principle, the network performance experienced by a particular application is difficult to attribute based on the behavior of the individual elements. At any given moment, the measure of performance between any two points is typically unknown and applications must operate blindly. As a further consequence, changes to the configuration of given element, or changes in the end-to-end path, cannot easily be validated. Optimization and provisioning cannot then be automated except against only the simplest design specifications. There is an increasing interest in Autonomic Networking research, and a strong conviction that an evolution from the current networking status quo is necessary. Although to date there have not been any practical implementations demonstrating the benefits of an effective autonomic networking paradigm, there seems to be a consensus as to the characteristics which such implementations would need to demonstrate. These specifically include continuous monitoring, identifying, diagnosing and fixing problems based on high-level policies and objectives. Autognostics, as a major part of the autonomic networking concept, intends to bring networks to a new level of awareness and eliminate the lack of visibility which currently exists in today's networks. == Definition == Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware, in part and as a whole, and dynamically adapt to the applications running on them by autonomously monitoring, identifying, diagnosing, resolving issues, subsequently verifying that any remediation was successful, and reporting the impact with respect to the application's use (i.e., providing visibility into the changes to networks and their effects). Although similar to the concept of network awareness, i.e., the capability of network devices and applications to be aware of network characteristics (see References section below), it is noteworthy that autognostics takes that concept one step further. The main difference is the auto part of autognostics, which entails that network devices are self-aware of network characteristics, and have the capability to adapt themselves as a result of continuous monitoring and diagnostics. == Path to autognostics == Autognostics, or in other words deep self-knowledge, can be best described as the ability of a network to know itself and the applications that run on it. This knowledge is used to autonomously adapt to dynamic network and application conditions such as utilization, capacity, quality of service/application/user experience, etc. In order to achieve autognosis, networks need a means to: Continuously monitor/test the network for application-specific performance Analyze the monitoring/test data to detect problems (e.g., performance degradation) Diagnose, identify and localize sources of degradation Automatically take actions to resolve problems via remediation/provisioning Verify the problems have been resolved (potentially rolling back changes if ineffective) Subsequently, continue to monitor/test for performance

  Read more →
• 

  Landweber iteration

  The Landweber iteration or Landweber algorithm is an algorithm to solve ill-posed linear inverse problems, and it has been extended to solve non-linear problems that involve constraints. The method was first proposed in the 1950s by Louis Landweber, and it can be now viewed as a special case of many other more general methods. == Basic algorithm == The original Landweber algorithm attempts to recover a signal x from (noisy) measurements y. The linear version assumes that y = A x {\displaystyle y=Ax} for a linear operator A. When the problem is in finite dimensions, A is just a matrix. When A is nonsingular, then an explicit solution is x = A − 1 y {\displaystyle x=A^{-1}y} . However, if A is ill-conditioned, the explicit solution is a poor choice since it is sensitive to any noise in the data y. If A is singular, this explicit solution doesn't even exist. The Landweber algorithm is an attempt to regularize the problem, and is one of the alternatives to Tikhonov regularization. We may view the Landweber algorithm as solving: min x ‖ A x − y ‖ 2 2 / 2 {\displaystyle \min _{x}\|Ax-y\|_{2}^{2}/2} using an iterative method. The algorithm is given by the update x k + 1 = x k − ω A ∗ ( A x k − y ) . {\displaystyle x_{k+1}=x_{k}-\omega A^{}(Ax_{k}-y).} where the relaxation factor ω {\displaystyle \omega } satisfies 0 < ω < 2 / σ 1 2 {\displaystyle 0<\omega <2/\sigma _{1}^{2}} . Here σ 1 {\displaystyle \sigma _{1}} is the largest singular value of A {\displaystyle A} . If we write f ( x ) = ‖ A x − y ‖ 2 2 / 2 {\displaystyle f(x)=\|Ax-y\|_{2}^{2}/2} , then the update can be written in terms of the gradient x k + 1 = x k − ω ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\omega \nabla f(x_{k})} and hence the algorithm is a special case of gradient descent. For ill-posed problems, the iterative method needs to be stopped at a suitable iteration index, because it semi-converges. This means that the iterates approach a regularized solution during the first iterations, but become unstable in further iterations. The reciprocal of the iteration index 1 / k {\displaystyle 1/k} acts as a regularization parameter. A suitable parameter is found, when the mismatch ‖ A x k − y ‖ 2 2 {\displaystyle \|Ax_{k}-y\|_{2}^{2}} approaches the noise level. Using the Landweber iteration as a regularization algorithm has been discussed in the literature. == Nonlinear extension == In general, the updates generated by x k + 1 = x k − τ ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\tau \nabla f(x_{k})} will generate a sequence f ( x k ) {\displaystyle f(x_{k})} that converges to a minimizer of f whenever f is convex and the stepsize τ {\displaystyle \tau } is chosen such that 0 < τ < 2 / ( ‖ ∇ f ‖ 2 ) {\displaystyle 0<\tau <2/(\|\nabla f\|^{2})} where ‖ ⋅ ‖ {\displaystyle \|\cdot \|} is the spectral norm. Since this is special type of gradient descent, there currently is not much benefit to analyzing it on its own as the nonlinear Landweber, but such analysis was performed historically by many communities not aware of unifying frameworks. The nonlinear Landweber problem has been studied in many papers in many communities; see, for example. == Extension to constrained problems == If f is a convex function and C is a convex set, then the problem min x ∈ C f ( x ) {\displaystyle \min _{x\in C}f(x)} can be solved by the constrained, nonlinear Landweber iteration, given by: x k + 1 = P C ( x k − τ ∇ f ( x k ) ) {\displaystyle x_{k+1}={\mathcal {P}}_{C}(x_{k}-\tau \nabla f(x_{k}))} where P {\displaystyle {\mathcal {P}}} is the projection onto the set C. Convergence is guaranteed when 0 < τ < 2 / ( ‖ A ‖ 2 ) {\displaystyle 0<\tau <2/(\|A\|^{2})} . This is again a special case of projected gradient descent (which is a special case of the forward–backward algorithm) as discussed in. == Applications == Since the method has been around since the 1950s, it has been adopted and rediscovered by many scientific communities, especially those studying ill-posed problems. In X-ray computed tomography it is called simultaneous iterative reconstruction technique (SIRT). It has also been used in the computer vision community and the signal restoration community. It is also used in image processing, since many image problems, such as deconvolution, are ill-posed. Variants of this method have been used also in sparse approximation problems and compressed sensing settings.

  Read more →
• 

  Corel VideoStudio

  Corel VideoStudio (formerly Ulead VideoStudio) is a video editing software package for Microsoft Windows. == Features == === Basic editing === The software allows storyboard and timeline-oriented editing. Various formats are supported for source clips, and the resulting video can be exported to a video file. DVD and AVCHD DVD authoring capabilities are included, and Blu-ray authoring is available via a plug-in. VideoStudio supports direct DV and HDV capture and burning. === Overlay === Users can overlay videos, images, and text. Using the overlay track, up to 50 clips can be displayed simultaneously. It can handle videos in MOV and AVI formats, including alpha channel, and images in PSP, PSD, PNG, and GIF formats. Clips that do not contain an alpha channel can have specific colours removed from the overlay video so that the required background or image is displayed in the foreground. === Proxy video files === VideoStudio supports high-definition video. Proxy files are smaller versions of the video source that stand in for the full-resolution source during editing to improve performance. === Plug-ins/bundles === VideoStudio supports VFX-type plug-ins from providers, including NewBlue and proDAD. proDAD plug-ins Roto-Pen, Script, Vitascene, and Mercalli-Stabilizer are bundled with X4 and later Ultimate Editions. == Version history == Ulead VideoStudio 4 (1999) Ulead VideoStudio 5 (2001) Ulead VideoStudio 6 (2002) Ulead VideoStudio 7 (2003) Ulead VideoStudio 8 (2004) Ulead VideoStudio 9 (2005) Ulead VideoStudio 10 plus. (2006) Corel Ulead VideoStudio 11 plus. (2007) Corel VideoStudio Pro X2 (v12, 2008) Corel VideoStudio Pro X3 (v13, 2010) 2011: Corel VideoStudio Pro X4 (v14, 2011) Adds support for stop motion animation, time-lapse mode photography, 3D movies, and 2nd generation Intel Core. Corel VideoStudio Pro X5 (v15, March 9, 2012): Adds HTML5 export (Comparison of HTML5 and Flash). Corel VideoStudio Pro X6 (v16, April 25, 2013): Windows 8 compatible. Adds UHD 4K support. Corel VideoStudio Pro X7 (v17, March 5, 2014): Software becomes 64-bit. Corel VideoStudio Pro X8 (v18, May 8, 2015): Several improvements. Corel VideoStudio Pro X9 (v19, February 16, 2016): Windows 10 compatible. Adds H.265 support, Multi-Camera Editor, and Match moving. Corel VideoStudio Pro X10 (v20, February 15, 2017): Adds Mask Creator, Track Transparency, and 360-degree video support. Corel VideoStudio Pro 2018 (v21, February 13, 2018): Adds split screen Video, Lens Correction, and 3D Title Editor. Corel VideoStudio Pro 2019 (v22, February 12, 2019): Adds Color Grading, Morph Transitions, and MultiCam Capture Lite. Corel VideoStudio Pro 2020 (v23, February 25, 2020). Corel VideoStudio Pro 2021 (v24, March 26, 2021): Adds Instant Project Templates, AR Stickers, and performance improvements (particularly regarding hardware acceleration). Corel VideoStudio Pro 2022 (v25, March 6, 2022): Adds face effects, GIF Creator, transitions for Camera Movements, a speech to text converter, and ProRes Smart Proxy.

  Read more →
• 

  Artbreeder

  Artbreeder, formerly known as Ganbreeder, is a collaborative, machine learning-based art website. Using the models StyleGAN and BigGAN, the website allows users to generate and modify images of faces, landscapes, and paintings, among other categories. == Overview == On Artbreeder, users mainly interact through the remixing - referred to as 'breeding' - of other users' images found in the publicly accessible database of images. The creation of new variations can be done by tweaking sliders on an image's page, known as "genes", which in the "Portraits" model can range from color balance to gender, facial hair, and glasses. Additionally, any image can be "crossbred" with other publicly viewable images from the database, using a slider to control how much of each image should influence the resulting "child". The site also allows for uploading new images, which the model will attempt to convert into the latent space of the network. == Notable usages == The similarly AI-driven text adventure game AI Dungeon uses Artbreeder to generate profile pictures for its users, and The Static Age's Andrew Paley has used Artbreeder to create the visuals for his music videos. Artbreeder has been used to create portraits of characters from popular novels such as Harry Potter and Twilight. They have also been used to add realistic features to ancient portraits. Artbreeder was used to create characters in the sequel to Ben Drowned with the titular villain, an AI-construct itself, created entirely using the website. == Changes to Artbreeder == ArtBreeder underwent an overhaul, introducing several features to enhance the user experience. Among these updates is the integration SD-XL, developed by stability.ai. Additionally, ArtBreeder also added a functionality known as ControlNet, which enables users to create images based on specific poses. With ControlNet, users can incorporate various poses into their AI Artworks. More features that were introduced into Artbreeder, are Pattern, which creates AI Pattern Images, Outpainting or Uncropping was also an added feature to Artbreeder, that allows the user to expand the image beyond the normal dimensions of the image. == Reception == The artwork generated by users of the website has been described as "beautiful" and "surreal," drawing comparisons to "weird, incomprehensible dreams" that "somehow touch the deep, unconscious parts of [the] mind". However, the generated faces were noted as "creepy and 'off'", and still nowhere near the quality attained by actual digital artists. Additionally, the site faced criticism for perceived confusing aspects of the AI's behavior. Jonathan Bartlett of Mind Matters News noted that "As is always the case with AI, sometimes the [gene] knobs don't work as expected and sometimes the results are... strange," while conceding that Artbreeder was still "probably the start of a new future of made-to-order stock images." Writers from Hyperallergic also took issue with perceived racial biases in the Portraits model, citing a comment from a user who faced difficulty from the neural network while attempting to darken the skin of a portrait to match a source image.

  Read more →
• 

  Randonautica

  Randonautica (a portmanteau of "random" + "nautica") is an app launched on February 22, 2020 founded by Auburn Salcedo and Joshua Lengfelder. It randomly generates coordinates that encourages the user to explore their local area and report what is found. According to its creators, the app is "an attractor of strange things," letting one choose specific coordinates based on a specific theme. It gained controversy after a report of two teenagers coincidentally finding a corpse while using the application. == Overview == The app, which creators claim to be inspired by chaos theory and Guy Debord's Theory of the Dérive, offers its users three types of coordinates to choose from: an attractor, a void, or an anomaly. The app has a cult following on YouTube and TikTok and there is a subreddit made by the creators for users of the app. == History == 29-year-old circus performer Joshua Lengfelder discovered a bot called Fatum Project in a fringe science chat group on Telegram in January 2019. According to The New York Times, "He absorbed the project’s theories about how random exploration could break people out of their predetermined realities, and how people could influence random outcomes with their minds." Lengfelder then created a Telegram bot using Fatum Project's code, generating coordinates. He then created the subreddit r/randonauts in March. In October, developer Simon Nishi McCorkindale made the bot's webpage. With the help of Auburn Salcedo, chief executive of a TV agency, both created Randonauts LLC. Salcedo became the chief operating officer while Lengfelder was the CEO. The app, called Randonautica, was launched on February 22, 2020. Later the same year the app and back-end got completely overhauled by a new team of developers and got a more visual and friendlier design and logo. In April 2022 Lengfelder exited Randonauts LLC and Auburn Salcedo became CEO. == Reception == The app has as many as 10.8 million users as of July 2020, gaining popularity amid the COVID-19 pandemic in the United States as restrictions have been lightened. Emma Chamberlain made a YouTube video about the app that helped increase its following. i-D reported that the hashtag #randonautica has gained 176.5 million views on TikTok, although it has not marketed itself yet. === Controversy === With the app's popularity, users started reporting coincidences which many find unsettling. The majority of reports were from TikTok and Reddit, as well as Telegram. The most notable controversy involved a group of people heading to a beach in Duwamish Head, Puget Sound, West Seattle per the app, where they found a bag with two dead bodies, a 27-year-old male and a 36-year-old female, as reported by the Seattle Police homicide detectives. In August 2020, police arrested and charged their landlord, Michael Lee Dudley, in connection with the murders. In March 2021, Dudley was denied bail while other people were under suspicion of aiding Dudley in the dismemberment and disposal of the bodies, but no one else had been charged. This has caused speculation that the app has an intended, puzzle-like theme. However, Lengfelder stated that it is "a shocking coincidence." Salcedo called the videos fake, and that "It’s so hard to manage, because people are really taking creative liberties after seeing how much traction the app is getting in that fear factor." In 2022, Michael Dudley was convicted of second degree murder for killing both victims, who were identified as Jessica Lewis and Austin Wenner. He was sentenced to 46 years in prison the following year. In their questions page, Randonautica's creators have said that if the app generates coordinates inside a private property, it is a violation of their terms and conditions to trespass. In addition, Randonautica has also received allegations that the app is used for human trafficking, which its creators have denied, saying that data collected by the app are anonymous. It also ensured that the app is not designed to violate religious customs, saying that "the app is simply a tool. Just as a knife can be used either to prepare dinner or to cut somebody."

  Read more →
• 

  Prequel (mobile application)

  Prequel, Inc. is an American technology company and mobile app developer known for developing the Prequel mobile application, which enables editing photos and videos with filters and effects generated using artificial intelligence. Prequel was founded in 2018 by Serge Aliseenko and Timur Khabirov, who currently serves as the company's CEO. It is headquartered in New York City. As of August 2022, it had been downloaded more than 100 million times. == History == In 2016, entrepreneur Timur Khabirov and investor Serge Aliseenko registered a US corporation named AIAR Labs Inc, which was developing AR solutions as an outsourced contractor. Of several proprietary products, Prequel was selected for beta-testing as a product focused on editing photos and videos. In 2018, Prequel was released on the Apple App Store. The launch cost $3 million USD, financed with the founders’ personal funds. The first release included approximately 10 filters for photos and the same amount of effects that augmented images with rose petals, rain and snow, VHS and film reel simulations, glitch, grain, sun puddles, and lomography. By June 2020, the app had also been released for Android. In 2021, Prequel founders Timur Khabirov and Serge Aliseenko launched a venture studio for startups working with artificial, computer vision, and AR-based visual art. In December 2022, Prequel reached the number 14 slot on the global rankings for Apple App Store’s Top Charts and the number 5 slot on the App Store’s U.S. charts. In March 2023, Prequel launched a new app called Artique, which is an AI-powered image editing app for businesses. Artique provides advertising and marketing graphic design using ready-made templates that users can customize, while giving suggestions and visual cues through artificial intelligence. Prequel was also one of the companies participating in discussions about artificial intelligence at SXSW 2023. == Features == Prequel describes its app as an "Aesthetic Pic Editor. The app uses artificial intelligence to create and edit content. Prequel can be used to touch up faces on images and videos and can also tie various decorative elements to certain points on the human body and face. Prequel filters include the "Cartoon" filter, which converts selfies into cartoon-style pictures. Other filters include Kidcore, Dust, Grain, Fisheye, Retro Style, Miami, Disco, and VHS-style filters, as well as the ability to create Renaissance-style pictures. Prequel also gives users the ability to apply color correction tools and to make moving images with 3D effects out of 2D images. Prequel allows users to take photos and videos directly through the app and apply filters and effects in real time. The app also comes with manual editing options for photos, such as adjusting the brightness and/or exposure and cropping photos, as well as an option to automatically apply adjustments. The Prequel app uses the Core ML, MNN, and TFLight frameworks to work with its neural networks. Some AI solutions are launched server-side, and some on the user's mobile device. A resulting photo or video edited with the app is called "a prequel." The app daily generates over 2 million such prequels, which are published by users in Instagram, TikTok, and other social media. As of 2022, the app has more than 800 filters and effects, along with video templates and support for GIFs and stickers. Prequel is free-to-use, but has a premium version that gives users access to more effects, filters, and beauty tools. Since its launch in 2018, Prequel has been downloaded more than 100 million times.

  Read more →
• 

  Voice activity detection

  Voice activity detection (VAD), also known as speech activity detection or speech detection, is the detection of the presence or absence of human speech, used in speech processing. The main uses of VAD are in speaker diarization, speech coding and speech recognition. It can facilitate speech processing, and can also be used to deactivate some processes during non-speech section of an audio session: it can avoid unnecessary coding/transmission of silence packets in Voice over Internet Protocol (VoIP) applications, saving on computation and on network bandwidth. VAD is an important enabling technology for a variety of speech-based applications. Therefore, various VAD algorithms have been developed that provide varying features and compromises between latency, sensitivity, accuracy and computational cost. Some VAD algorithms also provide further analysis, for example whether the speech is voiced, unvoiced or sustained. Voice activity detection is usually independent of language. It was first investigated for use on time-assignment speech interpolation (TASI) systems. == Algorithm overview == The typical design of a VAD algorithm is as follows: There may first be a noise reduction stage, e.g. via spectral subtraction. Then some features or quantities are calculated from a section of the input signal. A classification rule is applied to classify the section as speech or non-speech – often this classification rule finds when a value exceeds a certain threshold. There may be some feedback in this sequence, in which the VAD decision is used to improve the noise estimate in the noise reduction stage, or to adaptively vary the threshold(s). These feedback operations improve the VAD performance in non-stationary noise (i.e. when the noise varies a lot). A representative set of recently published VAD methods formulates the decision rule on a frame by frame basis using instantaneous measures of the divergence distance between speech and noise. The different measures which are used in VAD methods include spectral slope, correlation coefficients, log likelihood ratio, cepstral, weighted cepstral, and modified distance measures. Independently from the choice of VAD algorithm, a compromise must be made between having voice detected as noise, or noise detected as voice (between false positive and false negative). A VAD operating in a mobile phone must be able to detect speech in the presence of a range of very diverse types of acoustic background noise. In these difficult detection conditions it is often preferable that a VAD should fail-safe, indicating speech detected when the decision is in doubt, to lower the chance of losing speech segments. The biggest difficulty in the detection of speech in this environment is the very low signal-to-noise ratios (SNRs) that are encountered. It may be impossible to distinguish between speech and noise using simple level detection techniques when parts of the speech utterance are buried below the noise. == Applications == VAD is an integral part of different speech communication systems such as audio conferencing, echo cancellation, speech recognition, speech encoding, speaker recognition and hands-free telephony. In the field of multimedia applications, VAD allows simultaneous voice and data applications. Similarly, in Universal Mobile Telecommunications Systems (UMTS), it controls and reduces the average bit rate and enhances overall coding quality of speech. In cellular radio systems (for instance GSM and CDMA systems) based on Discontinuous Transmission (DTX) mode, VAD is essential for enhancing system capacity by reducing co-channel interference and power consumption in portable digital devices. In speech processing applications, voice activity detection plays an important role since non-speech frames are often discarded. For a wide range of applications such as digital mobile radio, Digital Simultaneous Voice and Data (DSVD) or speech storage, it is desirable to provide a discontinuous transmission of speech-coding parameters. Advantages can include lower average power consumption in mobile handsets, higher average bit rate for simultaneous services like data transmission, or a higher capacity on storage chips. However, the improvement depends mainly on the percentage of pauses during speech and the reliability of the VAD used to detect these intervals. On the one hand, it is advantageous to have a low percentage of speech activity. On the other hand, clipping, that is the loss of milliseconds of active speech, should be minimized to preserve quality. This is the crucial problem for a VAD algorithm under heavy noise conditions. === Use in telemarketing === One controversial application of VAD is in conjunction with predictive dialers used by telemarketing firms. In order to maximize agent productivity, telemarketing firms set up predictive dialers to call more numbers than they have agents available, knowing most calls will end up in either "Ring – No Answer" or answering machines. When a person answers, they typically speak briefly ("Hello", "Good evening", etc.) and then there is a brief period of silence. Answering machine messages are usually 3–15 seconds of continuous speech. By setting VAD parameters correctly, dialers can determine whether a person or a machine answered the call and, if it's a person, transfer the call to an available agent. If it detects an answering machine message, the dialer hangs up. Often, even when the system correctly detects a person answering the call, no agent may be available, resulting in a "silent call". Call screening with a multi-second message like "please say who you are, and I may pick up the phone" will frustrate such automated calls. == Performance evaluation == To evaluate a VAD, its output using test recordings is compared with those of an "ideal" VAD – created by hand-annotating the presence or absence of voice in the recordings. The performance of a VAD is commonly evaluated on the basis of the following four parameters: FEC (Front End Clipping): clipping introduced in passing from noise to speech activity; MSC (Mid Speech Clipping): clipping due to speech misclassified as noise; OVER: noise interpreted as speech due to the VAD flag remaining active in passing from speech activity to noise; NDS (Noise Detected as Speech): noise interpreted as speech within a silence period. Although the method described above provides useful objective information concerning the performance of a VAD, it is only an approximate measure of the subjective effect. For example, the effects of speech signal clipping can at times be hidden by the presence of background noise, depending on the model chosen for the comfort noise synthesis, so some of the clipping measured with objective tests is in reality not audible. It is therefore important to carry out subjective tests on VADs, the main aim of which is to ensure that the clipping perceived is acceptable. In VoIP applications, front-end clipping can be reduced by rewinding to shortly before the detection and sending very slightly delayed data. This kind of test requires a certain number of listeners to judge recordings containing the processing results of the VADs being tested, giving marks to several speech sequences on the following features: Quality; Comprehension difficulty; Audibility of clipping. These marks are then used to calculate average results for each of the features listed above, thus providing a global estimate of the behavior of the VAD being tested. To conclude, whereas objective methods are very useful in an initial stage to evaluate the quality of a VAD, subjective methods are more significant. As they require the participation of several people for a few days, increasing cost, they are generally only used when a proposal is about to be standardized. == Implementations == One early standard VAD is that developed by British Telecom for use in the Pan-European digital cellular mobile telephone service in 1991. It uses inverse filtering trained on non-speech segments to filter out background noise, so that it can then more reliably use a simple power-threshold to decide if a voice is present. The G.729 standard calculates the following features for its VAD: line spectral frequencies, full-band energy, low-band energy (<1 kHz), and zero-crossing rate. It applies a simple classification using a fixed decision boundary in the space defined by these features, and then applies smoothing and adaptive correction to improve the estimate. The GSM standard includes two VAD options developed by ETSI. Option 1 computes the SNR in nine bands and applies a threshold to these values. Option 2 calculates different parameters: channel power, voice metrics, and noise power. It then thresholds the voice metrics using a threshold that varies according to the estimated SNR. The Speex audio compression library uses a procedure named Improved Minima Controlled Recursive Averaging, which uses a smoothed representation of spectral pow

  Read more →
• 

  Shadow and highlight enhancement

  Shadow and highlight enhancement refers to an image processing technique used to correct exposure. The use of this technique has been gaining popularity, making its way onto magazine covers, digital media, and photos. It is, however, considered by some to be akin to other destructive Photoshop filters, such as the Watercolor filter, or the Mosaic filter. == Shadow recovery == A conservative application of the shadow/highlight tool can be very useful in recovering shadows, though it tends to leave a telltale halo around the boundary between highlight and shadow if used incorrectly. A way to avoid this is to use the bracketing technique, although this usually requires a tripod. == Highlight recovery == Recovering highlights with this tool, however, has mixed results, especially when using it on images with skin in them, and often makes people look like they have been "sprayed with fake tan". == Shadow brightening - manual == One way to brighten shadows in image editing software such as GIMP or Adobe Photoshop is to duplicate the background layer, invert the copy and set the blend modes of that top layer to "Soft Light". You can also use an inverted black and white copy of the image as a mask on a brightening layer, such as Curves or Levels. == Shadow brightening - automatic == Several automatic computer image processing-based shadow recovery and dynamic range compression methods can yield a similar effect. Some of these methods include the retinex method and homomorphic range compression. The retinex method is based on work from 1963 by Edwin Land, the founder of Polaroid. Shadow enhancement can also be accomplished using adaptive image processing algorithms such as adaptive histogram equalization or contrast limiting adaptive histogram equalization (CLAHE).

  Read more →
• 

  Screenless video

  Screenless video is any system for transmitting visual information from a video source without the use of a screen. Screenless computing systems can be divided into three groups: Visual Image, Retinal Direct, and Synaptic Interface. == Visual image == Visual Image screenless display includes any image that the eye can perceive. The most common example of Visual Image screenless display is a hologram. In these cases, light is reflected off some intermediate object (hologram, LCD panel, or cockpit window) before it reaches the retina. In the case of LCD panels the light is refracted from the back of the panel, but is nonetheless a reflected source. Google has proposed a similar system to replace the screens of tablet computers and smartphones. == Retinal display == Virtual retinal display systems are a class of screenless displays in which images are projected directly onto the retina. They are distinguished from visual image systems because light is not reflected from some intermediate object onto the retina, it is instead projected directly onto the retina. Retinal Direct systems, once marketed, hold out the promise of extreme privacy when computing work is done in public places because most snooping relies on viewing the same light as the person who is legitimately viewing the screen, and retinal direct systems send light only into the pupils of their intended viewer. == Synaptic interface == Synaptic Interface screenless video does not use light at all. Visual information completely bypasses the eye and is transmitted directly to the brain. While such systems have only been implemented in humans in rudimentary form - for example, displaying single Braille characters to blind people – success has been achieved in sampling usable video signals from the biological eyes of a living horseshoe crab through their optic nerves, and in sending video signals from electronic cameras into the creatures' brains using the same method.

  Read more →
• 

  Buckeye Corpus

  The Buckeye Corpus of conversational speech is a speech corpus created by a team of linguists and psychologists at Ohio State University led by Prof. Mark Pitt. It contains high-quality recordings from 40 speakers in Columbus, Ohio conversing freely with an interviewer. The interviewer's voice is heard only faintly in the background of these recordings. The sessions were conducted as Sociolinguistics interviews, and are essentially monologues. The speech has been orthographically transcribed and phonetically labeled. The audio and text files, together with time-aligned phonetic labels, are stored in a format for use with speech analysis software (Xwaves and Wavesurfer). Software for searching the transcription files is also available at the project web site. The corpus is available to researchers in academia and industry. The project was funded by the National Institute on Deafness and Other Communication Disorders and the Office of Research at Ohio State University.

  Read more →
• 

  Catie Cuan

  Catie Cuan is an artist, entrepeuneur, and innovator in the field of robotic art and human-robot interaction, where she specializes in choreorobotics, an emerging field at the intersection of choreographic dance and robotics. Catie Cuan is currently one of the academic researchers pioneering the field of choreorobotics and currently holds a post-doctoral fellowship at Stanford University. == Career == Catie Cuan earned a bachelor's degree from the University of California, Berkeley. She graduated with a Ph.D. from the Department of Mechanical Engineering at Stanford University, focusing in robotics. Her most cited publication is about how to improve robotic expressive systems using tools from dance theory, such as the Laban/Bartenieff Movement Analysis. In her most recent research projects, she explores a predictive model of imitation learning for robots moving around humans, a project that advances the field of social robotics. Cuan credits her work in robotics to the experience with her father when he had a stroke and was surrounded by many medical machines, which made her think about how people might feel empowered and hopeful rather than afraid. As a ballet dancer and choreographer, she has performed with the Metropolitan Opera Ballet and the Lyric Opera of Chicago. In 2020, she was the dancer and choreographer of the show Output, which was part of a collaboration with ThoughtWorks Arts and the Pratt Institute. In the production, she danced with an ABB IRB 6700 industrial robot. In 2022, she was named as an IF/THEN ambassador for the American Association for the Advancement of Science. The same year, she was appointed Futurist-in-Residence at the Smithsonian Arts and Industries Building, where she performed at the closing ceremonies of the FUTURES exhibit on July 6, 2022. Cuan has also contributed to product designs, working with IDEO and Dutch interior design firm moooi on their Piro project, which launched a dancing scent diffuser robot during Milan Design Week in June 2022. She is a TED speaker with talks about how to teach robots to dance, and what is coming up for dancing robots in the AI era.

  Read more →
• 

  Artifact (app)

  Artifact was a personalized social news aggregator app that uses recommender systems to suggest articles. Launched in January 2023 by Nokto, Inc., a company founded by co-founders of Instagram Kevin Systrom and Mike Krieger, the app is available for iOS and Android. The app's name is a portmanteau of the words "articles", "artificial intelligence", and "fact". The app shut down in January 2024 as a result of low interest. == History == Nokto, Inc. was established on March 3, 2022, as a foreign stock company in California, with its headquarters in San Francisco. The company's main product, Artifact, is the first new product launched by Krieger and Systrom since their 2018 resignation from Instagram after conflicts with parent company Meta, which acquired Instagram in 2012. Artifact launched on January 31, 2023, after the team had been working on it for over a year, offering the option to sign up for a waiting list for its private beta, which grew to about 160,000 people, and then launching in open beta on February 22, 2023. With a team of seven employees in San Francisco, the app was free throughout its lifetime, with the founders explaining at the time that different business models - such as advertising or subscription fees - could be explored in the future. In January 2024, cofounder Kevin Systrom announced that the app would be shutting down after concluding that "the market opportunity isn’t big enough to warrant continued investment in this way." In April 2024, it was announced Artifact had been acquired by Yahoo, who intended to use the service's technology in an upgraded Yahoo! News app. == Features == Frequently described as "TikTok for text" and a competitor to Twitter, Artifact was a news aggregator that used machine learning to make personalized recommendations based on topics, news sources, and authors that the reader is interested in. In addition to reading articles, the app offered the ability to like articles, leave comments, or listen to an audio version of an article read by AI-generated voices, including a simulation of the voices of Snoop Dogg or Gwyneth Paltrow. AI also would rewrite clickbait headlines that users flagged. Artifact later expanded to a social network where users could post links, images and text to their profile, which could be liked or commented on by other users. Similar to other social news websites like Reddit, reader accounts had profiles with reputation scores.

  Read more →
• 

  Hyperparameter optimization

  In machine learning, hyperparameter optimization or tuning is the problem of choosing a set of optimal hyperparameters for a learning algorithm. A hyperparameter is a parameter whose value is used to control the learning process, which must be configured before the process starts. Hyperparameter optimization determines the set of hyperparameters that yields an optimal model which minimizes a predefined loss function on a given data set. The objective function takes a set of hyperparameters and returns the associated loss. Cross-validation is often used to estimate this generalization performance, and therefore choose the set of values for hyperparameters that maximize it. == Approaches == === Grid search === The traditional method for hyperparameter optimization has been grid search, or a parameter sweep, which is simply an exhaustive searching through a manually specified subset of the hyperparameter space of a learning algorithm. A grid search algorithm must be guided by some performance metric, typically measured by cross-validation on the training set or evaluation on a hold-out validation set. Since the parameter space of a machine learner may include real-valued or unbounded value spaces for certain parameters, manually set bounds and discretization may be necessary before applying grid search. For example, a typical soft-margin SVM classifier equipped with an RBF kernel has at least two hyperparameters that need to be tuned for good performance on unseen data: a regularization constant C and a kernel hyperparameter γ. Both parameters are continuous, so to perform grid search, one selects a finite set of "reasonable" values for each, say C ∈ { 10 , 100 , 1000 } {\displaystyle C\in \{10,100,1000\}} γ ∈ { 0.1 , 0.2 , 0.5 , 1.0 } {\displaystyle \gamma \in \{0.1,0.2,0.5,1.0\}} Grid search then trains an SVM with each pair (C, γ) in the Cartesian product of these two sets and evaluates their performance on a held-out validation set (or by internal cross-validation on the training set, in which case multiple SVMs are trained per pair). Finally, the grid search algorithm outputs the settings that achieved the highest score in the validation procedure. Grid search suffers from the curse of dimensionality, but is often embarrassingly parallel because the hyperparameter settings it evaluates are typically independent of each other. === Random search === Random Search replaces the exhaustive enumeration of all combinations by selecting them randomly. This can be simply applied to the discrete setting described above, but also generalizes to continuous and mixed spaces. A benefit over grid search is that random search can explore many more values than grid search could for continuous hyperparameters. It can outperform Grid search, especially when only a small number of hyperparameters affects the final performance of the machine learning algorithm. In this case, the optimization problem is said to have a low intrinsic dimensionality. Random Search is also embarrassingly parallel, and additionally allows the inclusion of prior knowledge by specifying the distribution from which to sample. Despite its simplicity, random search remains one of the important base-lines against which to compare the performance of new hyperparameter optimization methods. === Bayesian optimization === Bayesian optimization is a global optimization method for noisy black-box functions. Applied to hyperparameter optimization, Bayesian optimization builds a probabilistic model of the function mapping from hyperparameter values to the objective evaluated on a validation set. By iteratively evaluating a promising hyperparameter configuration based on the current model, and then updating it, Bayesian optimization aims to gather observations revealing as much information as possible about this function and, in particular, the location of the optimum. It tries to balance exploration (hyperparameters for which the outcome is most uncertain) and exploitation (hyperparameters expected close to the optimum). In practice, Bayesian optimization has been shown to obtain better results in fewer evaluations compared to grid search and random search, due to the ability to reason about the quality of experiments before they are run. === Gradient-based optimization === For specific learning algorithms, it is possible to compute the gradient with respect to hyperparameters and then optimize the hyperparameters using gradient descent. The first usage of these techniques was focused on neural networks. Since then, these methods have been extended to other models such as support vector machines or logistic regression. A different approach in order to obtain a gradient with respect to hyperparameters consists in differentiating the steps of an iterative optimization algorithm using automatic differentiation. A more recent work along this direction uses the implicit function theorem to calculate hypergradients and proposes a stable approximation of the inverse Hessian. The method scales to millions of hyperparameters and requires constant memory. In a different approach, a hypernetwork is trained to approximate the best response function. One of the advantages of this method is that it can handle discrete hyperparameters as well. Self-tuning networks offer a memory efficient version of this approach by choosing a compact representation for the hypernetwork. More recently, Δ-STN has improved this method further by a slight reparameterization of the hypernetwork which speeds up training. Δ-STN also yields a better approximation of the best-response Jacobian by linearizing the network in the weights, hence removing unnecessary nonlinear effects of large changes in the weights. Apart from hypernetwork approaches, gradient-based methods can be used to optimize discrete hyperparameters also by adopting a continuous relaxation of the parameters. Such methods have been extensively used for the optimization of architecture hyperparameters in neural architecture search. === Evolutionary optimization === Evolutionary optimization is a methodology for the global optimization of noisy black-box functions. In hyperparameter optimization, evolutionary optimization uses evolutionary algorithms to search the space of hyperparameters for a given algorithm. Evolutionary hyperparameter optimization follows a process inspired by the biological concept of evolution: Create an initial population of random solutions (i.e., randomly generate tuples of hyperparameters, typically 100+) Evaluate the hyperparameter tuples and acquire their fitness function (e.g., 10-fold cross-validation accuracy of the machine learning algorithm with those hyperparameters) Rank the hyperparameter tuples by their relative fitness Replace the worst-performing hyperparameter tuples with new ones generated via crossover and mutation Repeat steps 2-4 until satisfactory algorithm performance is reached or is no longer improving. Evolutionary optimization has been used in hyperparameter optimization for statistical machine learning algorithms, automated machine learning, typical neural network and deep neural network architecture search, as well as training of the weights in deep neural networks. === Population-based === Population Based Training (PBT) learns both hyperparameter values and network weights. Multiple learning processes operate independently, using different hyperparameters. As with evolutionary methods, poorly performing models are iteratively replaced with models that adopt modified hyperparameter values and weights based on the better performers. This replacement model warm starting is the primary differentiator between PBT and other evolutionary methods. PBT thus allows the hyperparameters to evolve and eliminates the need for manual hypertuning. The process makes no assumptions regarding model architecture, loss functions or training procedures. PBT and its variants are adaptive methods: they update hyperparameters during the training of the models. On the contrary, non-adaptive methods have the sub-optimal strategy to assign a constant set of hyperparameters for the whole training. === Early stopping-based === A class of early stopping-based hyperparameter optimization algorithms is purpose-built for large search spaces of continuous and discrete hyperparameters, particularly when the computational cost to evaluate the performance of a set of hyperparameters is high. Irace implements the iterated racing algorithm, that focuses the search around the most promising configurations, using statistical tests to discard the ones that perform poorly. Another early stopping hyperparameter optimization algorithm is successive halving (SHA), which begins as a random search but periodically prunes low-performing models, thereby focusing computational resources on more promising models. Asynchronous successive halving (ASHA) further improves upon SHA's resource utilization profile by removing the need to synchronously evaluate a

  Read more →
• 

  Shearlet

  In applied mathematical analysis, shearlets are a multiscale framework which allows efficient encoding of anisotropic features in multivariate problem classes. Originally, shearlets were introduced in 2006 for the analysis and sparse approximation of functions f ∈ L 2 ( R 2 ) {\displaystyle f\in L^{2}(\mathbb {R} ^{2})} . They are a natural extension of wavelets, to accommodate the fact that multivariate functions are typically governed by anisotropic features such as edges in images, since wavelets, as isotropic objects, are not capable of capturing such phenomena. Shearlets are constructed by parabolic scaling, shearing, and translation applied to a few generating functions. At fine scales, they are essentially supported within skinny and directional ridges following the parabolic scaling law, which reads length² ≈ width. Similar to wavelets, shearlets arise from the affine group and allow a unified treatment of the continuum and digital situation leading to faithful implementations. Although they do not constitute an orthonormal basis for L 2 ( R 2 ) {\displaystyle L^{2}(\mathbb {R} ^{2})} , they still form a frame allowing stable expansions of arbitrary functions f ∈ L 2 ( R 2 ) {\displaystyle f\in L^{2}(\mathbb {R} ^{2})} . One of the most important properties of shearlets is their ability to provide optimally sparse approximations (in the sense of optimality in ) for cartoon-like functions f {\displaystyle f} . In imaging sciences, cartoon-like functions serve as a model for anisotropic features and are compactly supported in [ 0 , 1 ] 2 {\displaystyle [0,1]^{2}} while being C 2 {\displaystyle C^{2}} apart from a closed piecewise C 2 {\displaystyle C^{2}} singularity curve with bounded curvature. The decay rate of the L 2 {\displaystyle L^{2}} -error of the N {\displaystyle N} -term shearlet approximation obtained by taking the N {\displaystyle N} largest coefficients from the shearlet expansion is in fact optimal up to a log-factor: ‖ f − f N ‖ L 2 2 ≤ C N − 2 ( log ⁡ N ) 3 , N → ∞ , {\displaystyle \|f-f_{N}\|_{L^{2}}^{2}\leq CN^{-2}(\log N)^{3},\quad N\to \infty ,} where the constant C {\displaystyle C} depends only on the maximum curvature of the singularity curve and the maximum magnitudes of f {\displaystyle f} , f ′ {\displaystyle f'} and f ″ . {\displaystyle f''.} This approximation rate significantly improves the best N {\displaystyle N} -term approximation rate of wavelets providing only O ( N − 1 ) {\displaystyle O(N^{-1})} for such class of functions. Shearlets are to date the only directional representation system that provides sparse approximation of anisotropic features while providing a unified treatment of the continuum and digital realm that allows faithful implementation. Extensions of shearlet systems to L 2 ( R d ) , d ≥ 2 {\displaystyle L^{2}(\mathbb {R} ^{d}),d\geq 2} are also available. A comprehensive presentation of the theory and applications of shearlets can be found in. == Definition == === Continuous shearlet systems === The construction of continuous shearlet systems is based on parabolic scaling matrices A a = [ a 0 0 a 1 / 2 ] , a > 0 {\displaystyle A_{a}={\begin{bmatrix}a&0\\0&a^{1/2}\end{bmatrix}},\quad a>0} as a means to change the resolution, on shear matrices S s = [ 1 s 0 1 ] , s ∈ R {\displaystyle S_{s}={\begin{bmatrix}1&s\\0&1\end{bmatrix}},\quad s\in \mathbb {R} } as a means to change the orientation, and finally on translations to change the positioning. In comparison to curvelets, shearlets use shearings instead of rotations, the advantage being that the shear operator S s {\displaystyle S_{s}} leaves the integer lattice invariant in case s ∈ Z {\displaystyle s\in \mathbb {Z} } , i.e., S s Z 2 ⊆ Z 2 . {\displaystyle S_{s}\mathbb {Z} ^{2}\subseteq \mathbb {Z} ^{2}.} This indeed allows a unified treatment of the continuum and digital realm, thereby guaranteeing a faithful digital implementation. For ψ ∈ L 2 ( R 2 ) {\displaystyle \psi \in L^{2}(\mathbb {R} ^{2})} the continuous shearlet system generated by ψ {\displaystyle \psi } is then defined as SH c o n t ⁡ ( ψ ) = { ψ a , s , t = a 3 / 4 ψ ( S s A a ( ⋅ − t ) ) ∣ a > 0 , s ∈ R , t ∈ R 2 } , {\displaystyle \operatorname {SH} _{\mathrm {cont} }(\psi )=\{\psi _{a,s,t}=a^{3/4}\psi (S_{s}A_{a}(\cdot -t))\mid a>0,s\in \mathbb {R} ,t\in \mathbb {R} ^{2}\},} and the corresponding continuous shearlet transform is given by the map f ↦ S H ψ f ( a , s , t ) = ⟨ f , ψ a , s , t ⟩ , f ∈ L 2 ( R 2 ) , ( a , s , t ) ∈ R > 0 × R × R 2 . {\displaystyle f\mapsto {\mathcal {SH}}_{\psi }f(a,s,t)=\langle f,\psi _{a,s,t}\rangle ,\quad f\in L^{2}(\mathbb {R} ^{2}),\quad (a,s,t)\in \mathbb {R} _{>0}\times \mathbb {R} \times \mathbb {R} ^{2}.} === Discrete shearlet systems === A discrete version of shearlet systems can be directly obtained from SH c o n t ⁡ ( ψ ) {\displaystyle \operatorname {SH} _{\mathrm {cont} }(\psi )} by discretizing the parameter set R > 0 × R × R 2 . {\displaystyle \mathbb {R} _{>0}\times \mathbb {R} \times \mathbb {R} ^{2}.} There are numerous approaches for this but the most popular one is given by { ( 2 j , k , A 2 j − 1 S k − 1 m ) ∣ j ∈ Z , k ∈ Z , m ∈ Z 2 } ⊆ R > 0 × R × R 2 . {\displaystyle \{(2^{j},k,A_{2^{j}}^{-1}S_{k}^{-1}m)\mid j\in \mathbb {Z} ,k\in \mathbb {Z} ,m\in \mathbb {Z} ^{2}\}\subseteq \mathbb {R} _{>0}\times \mathbb {R} \times \mathbb {R} ^{2}.} From this, the discrete shearlet system associated with the shearlet generator ψ {\displaystyle \psi } is defined by SH ⁡ ( ψ ) = { ψ j , k , m = 2 3 j / 4 ψ ( S k A 2 j ⋅ − m ) ∣ j ∈ Z , k ∈ Z , m ∈ Z 2 } , {\displaystyle \operatorname {SH} (\psi )=\{\psi _{j,k,m}=2^{3j/4}\psi (S_{k}A_{2^{j}}\cdot {}-m)\mid j\in \mathbb {Z} ,k\in \mathbb {Z} ,m\in \mathbb {Z} ^{2}\},} and the associated discrete shearlet transform is defined by f ↦ S H ψ f ( j , k , m ) = ⟨ f , ψ j , k , m ⟩ , f ∈ L 2 ( R 2 ) , ( j , k , m ) ∈ Z × Z × Z 2 . {\displaystyle f\mapsto {\mathcal {SH}}_{\psi }f(j,k,m)=\langle f,\psi _{j,k,m}\rangle ,\quad f\in L^{2}(\mathbb {R} ^{2}),\quad (j,k,m)\in \mathbb {Z} \times \mathbb {Z} \times \mathbb {Z} ^{2}.} == Examples == Let ψ 1 ∈ L 2 ( R ) {\displaystyle \psi _{1}\in L^{2}(\mathbb {R} )} be a function satisfying the discrete Calderón condition, i.e., ∑ j ∈ Z | ψ ^ 1 ( 2 − j ξ ) | 2 = 1 , for a.e. ξ ∈ R , {\displaystyle \sum _{j\in \mathbb {Z} }|{\hat {\psi }}_{1}(2^{-j}\xi )|^{2}=1,{\text{for a.e. }}\xi \in \mathbb {R} ,} with ψ ^ 1 ∈ C ∞ ( R ) {\displaystyle {\hat {\psi }}_{1}\in C^{\infty }(\mathbb {R} )} and supp ⁡ ψ ^ 1 ⊆ [ − 1 2 , − 1 16 ] ∪ [ 1 16 , 1 2 ] , {\displaystyle \operatorname {supp} {\hat {\psi }}_{1}\subseteq [-{\tfrac {1}{2}},-{\tfrac {1}{16}}]\cup [{\tfrac {1}{16}},{\tfrac {1}{2}}],} where ψ ^ 1 {\displaystyle {\hat {\psi }}_{1}} denotes the Fourier transform of ψ 1 . {\displaystyle \psi _{1}.} For instance, one can choose ψ 1 {\displaystyle \psi _{1}} to be a Meyer wavelet. Furthermore, let ψ 2 ∈ L 2 ( R ) {\displaystyle \psi _{2}\in L^{2}(\mathbb {R} )} be such that ψ ^ 2 ∈ C ∞ ( R ) , {\displaystyle {\hat {\psi }}_{2}\in C^{\infty }(\mathbb {R} ),} supp ⁡ ψ ^ 2 ⊆ [ − 1 , 1 ] {\displaystyle \operatorname {supp} {\hat {\psi }}_{2}\subseteq [-1,1]} and ∑ k = − 1 1 | ψ ^ 2 ( ξ + k ) | 2 = 1 , for a.e. ξ ∈ [ − 1 , 1 ] . {\displaystyle \sum _{k=-1}^{1}|{\hat {\psi }}_{2}(\xi +k)|^{2}=1,{\text{for a.e. }}\xi \in \left[-1,1\right].} One typically chooses ψ ^ 2 {\displaystyle {\hat {\psi }}_{2}} to be a smooth bump function. Then ψ ∈ L 2 ( R 2 ) {\displaystyle \psi \in L^{2}(\mathbb {R} ^{2})} given by ψ ^ ( ξ ) = ψ ^ 1 ( ξ 1 ) ψ ^ 2 ( ξ 2 ξ 1 ) , ξ = ( ξ 1 , ξ 2 ) ∈ R 2 , {\displaystyle {\hat {\psi }}(\xi )={\hat {\psi }}_{1}(\xi _{1}){\hat {\psi }}_{2}\left({\tfrac {\xi _{2}}{\xi _{1}}}\right),\quad \xi =(\xi _{1},\xi _{2})\in \mathbb {R} ^{2},} is called a classical shearlet. It can be shown that the corresponding discrete shearlet system SH ⁡ ( ψ ) {\displaystyle \operatorname {SH} (\psi )} constitutes a Parseval frame for L 2 ( R 2 ) {\displaystyle L^{2}(\mathbb {R} ^{2})} consisting of bandlimited functions. Another example are compactly supported shearlet systems, where a compactly supported function ψ ∈ L 2 ( R 2 ) {\displaystyle \psi \in L^{2}(\mathbb {R} ^{2})} can be chosen so that SH ⁡ ( ψ ) {\displaystyle \operatorname {SH} (\psi )} forms a frame for L 2 ( R 2 ) {\displaystyle L^{2}(\mathbb {R} ^{2})} . In this case, all shearlet elements in SH ⁡ ( ψ ) {\displaystyle \operatorname {SH} (\psi )} are compactly supported providing superior spatial localization compared to the classical shearlets, which are bandlimited. Although a compactly supported shearlet system does not generally form a Parseval frame, any function f ∈ L 2 ( R 2 ) {\displaystyle f\in L^{2}(\mathbb {R} ^{2})} can be represented by the shearlet expansion due to its frame property. == Cone-adapted shearlets == One drawback of shearlets defined as above is the directional bias of shearlet elements associated with large shearing parameters. This effect is already r

  Read more →
• 

  EditDV

  EditDV was a video editing software released by Radius, Inc. in late 1997 as an evolution of their earlier Radius Edit product. EditDV was one of the first products providing professional-quality editing of the then new DV format at a relatively affordable cost ($999 including Radius FireWire capture card) and was named "The Best Video Tool of 1998". Originally EditDV was available for Macintosh only but in February 2000 EditDV 2.0 for Windows was released. With version 3.0 EditDV's name was changed to CineStream. == Features == Originally bundled with a FireWire card, EditDV 1.5 got updated into a less expensive software only package for use with the newer PowerMac G3 that came with a FireWire interface. Later, a scaled down version named EditDV 1.6.1 Unplugged was released as a freeware version next to EditDV 2.0. Unlike many other applications at the time which transcoded video to M-JPEG for editing, EditDV provided lossless native editing of the DV format. Only transitions (such as dissolves or wipes), effects (such as rotating or scaling the video, adjusting the audio level, or adding titles) and filters (such as changing the brightness or color balance) needed to be rendered. This also had the disadvantage to not work with analogue video capture. EditDV was built on top of QuickTime and supported QuickTime filters as well as its own built-in effects and transitions. Effects could be animated using keyframes. EditDV 2.0 worked natively with Quicktime MOV format. For Microsoft Windows users, where the standard was AVI, this required the use of a provided external conversion tool afterwards when AVI was wanted. The user interface had a Project window for organising clips into bins, a Sequence window with a multi-track timeline for arranging clips into a program using three-point editing, and Source and Program monitor windows. A finished program could either be exported as a QuickTime movie or written back to DV tape using the "print to video" command. Version 3.0, then renamed CineStream, shifted towards web designers who wanted to add video streaming interactivity to a website. The new feature called EventStream allowed setting clickable hot spots to link to another location, either to another page with a URL or to another video. This feature distinguished CineStream from the rest of the competition. == Products == The EditDV product family included a number of related products, all sharing a similar name: EditDV Video editing software (Mac and Windows) SoftDV A QuickTime software codec for playing DV media, included as part of EditDV (Mac and Windows) MotoDV PCI-based FireWire interface with DV capture software (Mac and Windows) PhotoDV Software to capture high-quality stills from a DV tape using MotoDV hardware (Mac and Windows) RotoDV Software for rotoscoping (painting over video), released in Sept 1999 (Macintosh only) == Name changes and eventual demise == In 1999, the company Radius Inc. changed its name to Digital Origin. In 2000, Digital Origin Inc (and EditDV) was bought by Media 100. In early 2001, Media 100 released an updated version of EditDV under the new name CineStream 3.0. Later that year (October 2001) Media 100 was bought by Autodesk's Discreet Division. CineStream for Macintosh required classic Mac OS. It was never ported to Mac OS X and faced increasing competition on that platform from Apple's own Final Cut Pro application. Development of EditDV/Cinestream was officially discontinued in 2002.

  Read more →