AI For Students Essay

AI For Students Essay — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Pyramid (image processing)

  Pyramid, or pyramid representation, is a type of multi-scale signal representation developed by the computer vision, image processing and signal processing communities, in which a signal or an image is subject to repeated smoothing and subsampling. Pyramid representation is a predecessor to scale-space representation and multiresolution analysis. == Pyramid generation == There are two main types of pyramids: lowpass and bandpass. A lowpass pyramid is made by smoothing the image with an appropriate smoothing filter and then subsampling the smoothed image, usually by a factor of 2 along each coordinate direction. The resulting image is then subjected to the same procedure, and the cycle is repeated multiple times. Each cycle of this process results in a smaller image with increased smoothing, but with decreased spatial sampling density (that is, decreased image resolution). If illustrated graphically, the entire multi-scale representation will look like a pyramid, with the original image on the bottom and each cycle's resulting smaller image stacked one atop the other. A bandpass pyramid is made by forming the difference between images at adjacent levels in the pyramid and performing image interpolation between adjacent levels of resolution, to enable computation of pixelwise differences. == Pyramid generation kernels == A variety of different smoothing kernels have been proposed for generating pyramids. Among the suggestions that have been given, the binomial kernels arising from the binomial coefficients stand out as a particularly useful and theoretically well-founded class. Thus, given a two-dimensional image, we may apply the (normalized) binomial filter (1/4, 1/2, 1/4) typically twice or more along each spatial dimension and then subsample the image by a factor of two. This operation may then proceed as many times as desired, leading to a compact and efficient multi-scale representation. If motivated by specific requirements, intermediate scale levels may also be generated where the subsampling stage is sometimes left out, leading to an oversampled or hybrid pyramid. With the increasing computational efficiency of CPUs available today, it is in some situations also feasible to use wider supported Gaussian filters as smoothing kernels in the pyramid generation steps. === Gaussian pyramid === In a Gaussian pyramid, subsequent images are weighted down using a Gaussian average (Gaussian blur) and scaled down. Each pixel containing a local average corresponds to a neighborhood pixel on a lower level of the pyramid. This technique is used especially in texture synthesis. === Laplacian pyramid === A Laplacian pyramid is very similar to a Gaussian pyramid but saves the difference image of the blurred versions between each levels. Only the smallest level is not a difference image to enable reconstruction of the high resolution image using the difference images on higher levels. This technique can be used in image compression. === Steerable pyramid === A steerable pyramid, developed by Simoncelli and others, is an implementation of a multi-scale, multi-orientation band-pass filter bank used for applications including image compression, texture synthesis, and object recognition. It can be thought of as an orientation selective version of a Laplacian pyramid, in which a bank of steerable filters are used at each level of the pyramid instead of a single Laplacian or Gaussian filter. == Applications of pyramids == === Alternative representation === In the early days of computer vision, pyramids were used as the main type of multi-scale representation for computing multi-scale image features from real-world image data. More recent techniques include scale-space representation, which has been popular among some researchers due to its theoretical foundation, the ability to decouple the subsampling stage from the multi-scale representation, the more powerful tools for theoretical analysis as well as the ability to compute a representation at any desired scale, thus avoiding the algorithmic problems of relating image representations at different resolution. Nevertheless, pyramids are still frequently used for expressing computationally efficient approximations to scale-space representation. === Detail manipulation === Levels of a Laplacian pyramid can be added to or removed from the original image to amplify or reduce detail at different scales. However, detail manipulation of this form is known to produce halo artifacts in many cases, leading to the development of alternatives such as the bilateral filter. Some image compression file formats use the Adam7 algorithm or some other interlacing technique. These can be seen as a kind of image pyramid. Because those file format store the "large-scale" features first, and fine-grain details later in the file, a particular viewer displaying a small "thumbnail" or on a small screen can quickly download just enough of the image to display it in the available pixels—so one file can support many viewer resolutions, rather than having to store or generate a different file for each resolution.

  Read more →
• 

  List of information schools

  This list of information schools, sometimes abbreviated to iSchools, includes members of the iSchools organization. The iSchools organization reflects a consortium of over 130 information schools across the globe. == History == The first iSchools Caucus was formed in 1988 by Syracuse, Pittsburgh, and Drexel and was called the Gang of Three (sometimes gang of four with Rutgers). Syracuse renamed the School of Library Science as the School of Information Studies in 1974, and is considered as the first “iSchool” in history. The group was formally named "the iSchools Caucus" or more casually, the iCaucus. By 2003, the group expanded to include the Universities of Michigan, Washington, Illinois, UNC, Florida State, Indiana, and Texas, and was called the Gang of Ten. The current iSchools Caucus organization was formalized by 2005, with additions of UC Berkeley, UC Irvine, UCLA, Penn State, Georgia Tech, Maryland, Toronto, Carnegie Mellon and Singapore Management University. == iSchools organization == The iSchools promote an interdisciplinary approach to understanding the opportunities and challenges of information management, with a core commitment to concepts like universal access and user-centered organization of information. The field is concerned broadly with questions of design and preservation across information spaces, from digital and virtual spaces such as online communities, social networking, the World Wide Web, and databases to physical spaces such as libraries, museums, collections, and other repositories. "School of Information", "Department of Information Studies", or "Information Department" are often the names of the participating organizations. Degree programs at iSchools include course offerings in areas such as information architecture, design, policy, and economics; knowledge management, user experience design, and usability; preservation and conservation; librarianship and library administration; the sociology of information; and human-computer interaction and computer science. === Leadership === The executive committee of the iSchools is made up of the current chair (Ina Fourie, University of Pretoria, South Africa), past chair (Gillian Oliver, Monash University, Australia) and the chair elect (Javed Mostafa, University of Toronto Canada), plus representatives from the three regions (North America, Europe, and Asia-Pacific). The current executive director is Slava Sterzer. == Member institutions == Between 2010 and 2026, the organization expanded globally beyond North America, growing to 133 member schools as of March 2026. For an updated and complete list of member schools, please visit the member database of the iSchools. == iConferences == Members of the iSchools organize a regular academic conference, known as the iConference, hosted by a different member institution each year. September 2005: Pennsylvania State University October 2006: University of Michigan February 2008: University of California, Los Angeles February 2009: University of North Carolina February 2010: University of Illinois at Urbana-Champaign February 2011: University of Washington, Seattle February 2012: University of Toronto February 2013: University of North Texas March 2014: Humboldt-Universität zu Berlin March 2015: University of California, Irvine March 2016: Drexel University March 2017: Wuhan University March 2018: University of Sheffield and Northumbria University March 2019: University of Maryland March 2020: University of Borås (virtual only) March 2021: Renmin University of China (virtual only) February/March 2022: University of Texas at Austin, University College Dublin & Kyushu University (virtual only) March 2023: Universitat Oberta de Catalunya March 2024: Jilin University March 2025: Indiana University March/April 2026: Edinburgh Napier University 2027: Victoria University of Wellington == Other schools of information == Other information schools and programs include: Documentation Research and Training Centre, Indian Statistical Institute, Bangalore San Jose State University, School of Information University of Southern California Library Science Degree Ankara University, Department of Information and Records Management, Ankara/Turkey Marmara University, Department of Information and Records Management, Istanbul/Turkey University of Kelaniya, Department of Library and Information Science, Kelaniya/Sri Lanka University of Colombo, National Institute of Library and Information Science (NILIS), Colombo/Sri Lanka Chicago State University, Department of Information Studies

  Read more →
• 

  Spatial computing

  Spatial computing refers to 3D human–computer interaction techniques that are perceived by users as taking place in the real world, in and around their bodies and physical environments, instead of constrained to and perceptually behind computer screens or in purely virtual worlds. This concept inverts the long-standing practice of teaching people to interact with computers in digital environments, and instead teaches computers to better understand and interact with people more naturally in the human world. This concept overlaps with and encompasses others including extended reality, augmented reality, mixed reality, natural user interface, contextual computing, affective computing, and ubiquitous computing. The usage for labeling and discussing these adjacent technologies is imprecise. Spatial computing devices include sensors—such as RGB cameras, depth cameras, 3D trackers, inertial measurement units, or other tools—to sense and track nearby human bodies (including hands, arms, eyes, legs, mouths) during ordinary interactions with people and computers in a 3D space. They further use computer vision to attempt to understand real world scenes, such as rooms, streets or stores, to read labels, to recognize objects, create 3D maps, and more. Quite often they also use extended reality and mixed reality to superimpose virtual 3D graphics and virtual 3D audio onto the human visual and auditory system as a way of providing information more naturally and contextually than traditional 2D screens. Spatial computing often refers to personal computing devices like headsets and headphones, but other human-computer interactions that leverage real-time spatial positioning for displays, like projection mapping or cave automatic virtual environment displays, can also be considered spatial computing if they leverage human-computer input for the participants. == History == The term "spatial computing" apparently originated in the field of GIS around 1985 or earlier to describe computations on large-scale geospatial information. Early examples of spatial computing in GIS include ArcInfo and its iterations, initially released in 1981, a part of ArcGIS along with ArcEditor, which together provide mapping, analysis, editing, and geoprocessing for geodatabases. This is somewhat related to the modern use, but on the scale of continents, cities, and neighborhoods. Modern spatial computing is more centered on the human scale of interaction, around the size of a living room or smaller. But it is not limited to that scale in the aggregate. In the early 1990s, as field of virtual reality was beginning to be commercialized beyond academic and military labs, a startup called Worldesign in Seattle used the term Spatial Computing to describe the interaction between individual people and 3D spaces, operating more at the human end of the scale than previous GIS examples may have contemplated. The company built a CAVE-like environment it called the Virtual Environment Theater, whose 3D experience was of a virtual flyover of the Giza Plateau, circa 3000 BC. Robert Jacobson, CEO of Worldesign, attributes the origins of the term to experiments at the Human Interface Technology Lab, at the University of Washington, under the direction of Thomas A. Furness III. Jacobson was a co-founder of that lab before spinning off this early VR startup. In 1997, an academic publication by T. Caelli, Peng Lam, and H. Bunke called "Spatial Computing: Issues in Vision, Multimedia and Visualization Technologies" introduced the term more broadly for academic audiences, focusing on a variety of topics such as image processing, dead reckoning navigation, object recognition, and visualizing spatial data. The specific term "spatial computing" was later referenced again in 2003 by Simon Greenwold, as "human interaction with a machine in which the machine retains and manipulates referents to real objects and spaces". MIT Media Lab alumnus John Underkoffler gave a TED talk in 2010 giving a live demo of the multi-screen, multi-user spatial computing systems being developed by Oblong Industries, which sought to bring to life the futuristic interfaces conceptualized by Underkoffler in the films Minority Report and Iron Man. Google Earth, initially released by Keyhole Inc. in 2001 and re-released by Google in 2005 can be considered a capable GIS and includes advanced geospatial tools and capabilities. == Notable instances of the use of spatial computing == In 2019, Microsoft HoloLens released a video outlining Airbus' partnership with Microsoft Azure to utilize the latter's mixed reality services for streamlining and improving the aircraft design process, as well as reducing the error in development. Airbus utilized the HoloLens 2 to this end, and the executive vice president of engineering claimed that their design process' validation phases were "hugely accelerated by 80 percent", as well as "strongly believe[d]" that up to 30% improvements in their industrial tasks could be attained with the HoloLens 2. During the presentational video, Airbus cited the maturity of Microsoft Azure services as "key" for their usage of the HoloLens 2. Also in 2019, the U.S. army partnered with Microsoft to produce a HoloLens based Integrated Visual Augmentation System (IVAS) to enhance infantry members by giving troops various abilities, including but not limited to using holographs to train, projecting 3D maps into their vision, and seeing through smoke and corners. Microsoft received tens of thousands of hours of feedback for their systems by 2021. Sergeant Marc Krugh at the time claimed that Microsoft's partnership has already caused the army to rethink some of its troops' operation strategy. == Products == === Apple Vision Pro === Apple announced Apple Vision Pro, a device it markets as a "spatial computer", on June 5, 2023. It includes several features such as Spatial Audio, two 4K micro-OLED displays, the Apple R1 chip and eye tracking, and released in the United States on February 2, 2024. In announcing the platform, Apple invoked its history of popularizing 2D graphical user interfaces that supplanted prior human-computer interface mechanisms such as the command line. Apple suggests the introduction of spatial computing as a new category of interactive device, on the same level of importance as the introduction of the 2D GUI. Apple Vision Pro runs on a new operating system called visionOS, which combines eye tracking, gesture recognition, and voice input to enable immersive interaction without physical controllers. The platform is aimed at productivity, entertainment, collaboration, and enterprise use cases. === Magic Leap === Magic Leap had also previously used the term “spatial computing” to describe its own devices. Its first headset, the Magic Leap 1, was released on August 8, 2018. Magic Leap’s technology enables the display of content into the real world using an optical see-through head-mounted display, which projects an overlay of a virtual world into the user’s field of view. This allows for an experience where the physical and digital worlds are perceived simultaneously. === Microsoft Hololens === On February 24, 2019, Microsoft released the HoloLens 2, which includes mixed reality tools and can generate interactable, manipulatable holograms in 3D space. The holograms in question can be related to a physical object or completely independent and free-floating. The Azure Spatial Anchors cloud service was released simultaneously, which gives the holograms capability to persist across time and many individuals' devices. === Meta Quest === The Meta Quest 3, a mixed reality gaming headset that includes spatial audio, two color cameras, and grants the ability to interact with virtual characters released on October 9, 2023, at a notably cheaper price than the Apple Vision Pro, but with reduced capabilities. === Snap Spectacles === Spectacles (product) are augmented reality glasses developed by Snap Inc.. The latest generation includes a 46-degree stereoscopic display, adjustable tint, and Snapdragon processors. Spectacles allow users to interact with a collection of augmented reality experiences designed for education, entertainment, and utility. Currently, the device is in the hands of selected developers and creators, as part of an experimental AR ecosystem focused on creativity, use case exploration and expression.

  Read more →
• 

  Species distribution modelling

  Species distribution modelling (SDM), also known as environmental (or ecological) niche modelling (ENM), habitat suitability modelling, predictive habitat distribution modelling, and range mapping uses ecological models to predict the distribution of a species across geographic space and time using environmental data. The environmental data are most often climate data (e.g. temperature, precipitation), but can include other variables such as soil type, water depth, and land cover. SDMs are used in several research areas in conservation biology, ecology and evolution. These models can be used to understand how environmental conditions influence the occurrence or abundance of a species, and for predictive purposes (ecological forecasting). Predictions from an SDM may be of a species' future distribution under climate change, a species' past distribution in order to assess evolutionary relationships, or the potential future distribution of an invasive species. Predictions of current and/or future habitat suitability can be useful for management applications (e.g. reintroduction or translocation of vulnerable species, reserve placement in anticipation of climate change). There are two main types of SDMs. Correlative SDMs, also known as climate envelope models, bioclimatic models, or resource selection function models, model the observed distribution of a species as a function of environmental conditions. Mechanistic SDMs, also known as process-based models or biophysical models, use independently derived information about a species' physiology to develop a model of the environmental conditions under which the species can exist. The extent to which such modelled data reflect real-world species distributions will depend on a number of factors, including the nature, complexity, and accuracy of the models used and the quality of the available environmental data layers; the availability of sufficient and reliable species distribution data as model input; and the influence of various factors such as barriers to dispersal, geologic history, or biotic interactions, that increase the difference between the realized niche and the fundamental niche. Environmental niche modelling may be considered a part of the discipline of biodiversity informatics. == History == A. F. W. Schimper used geographical and environmental factors to explain plant distributions in his 1898 Pflanzengeographie auf physiologischer Grundlage (Plant Geography Upon a Physiological Basis) and his 1908 work of the same name. Andrew Murray used the environment to explain the distribution of mammals in his 1866 The Geographical Distribution of Mammals. Robert Whittaker's work with plants and Robert MacArthur's work with birds strongly established the role the environment plays in species distributions. Elgene O. Box constructed environmental envelope models to predict the range of tree species. His computer simulations were among the earliest uses of species distribution modelling. The adoption of more sophisticated generalised linear models (GLMs) made it possible to create more sophisticated and realistic species distribution models. The expansion of remote sensing and the development of GIS-based environmental modelling increase the amount of environmental information available for model-building and made it easier to use. == Correlative vs mechanistic models == === Correlative SDMs === SDMs originated as correlative models. Correlative SDMs model the observed distribution of a species as a function of geographically referenced climatic predictor variables using multiple regression approaches. Given a set of geographically referred observed presences of a species and a set of climate maps, a model defines the most likely environmental ranges within which a species lives. Correlative SDMs assume that species are at equilibrium with their environment and that the relevant environmental variables have been adequately sampled. The models allow for interpolation between a limited number of species occurrences. For these models to be effective, it is required to gather observations not only of species presences, but also of absences, that is, where the species does not live. Records of species absences are typically not as common as records of presences, thus often "random background" or "pseudo-absence" data are used to fit these models. If there are incomplete records of species occurrences, pseudo-absences can introduce bias. Since correlative SDMs are models of a species' observed distribution, they are models of the realized niche (the environments where a species is found), as opposed to the fundamental niche (the environments where a species can be found, or where the abiotic environment is appropriate for the survival). For a given species, the realized and fundamental niches might be the same, but if a species is geographically confined due to dispersal limitation or species interactions, the realized niche will be smaller than the fundamental niche. Correlative SDMs are easier and faster to implement than mechanistic SDMs, and can make ready use of available data. Since they are correlative however, they do not provide much information about causal mechanisms and are not good for extrapolation. They will also be inaccurate if the observed species range is not at equilibrium (e.g. if a species has been recently introduced and is actively expanding its range). In standard SDMs, the distribution of a single species is often modeled, with unique parameters describing how environmental (abiotic) factors influence its occurrence probability. This allows for differentiated responses to environmental drivers among species, but can be problematic for data-deficient species. In contrast, similarities in environmental responses can be accounted for in multi-species SDMs, which model several species jointly using shared or hierarchically related parameters. However, neither approach explicitly accounts for community-level biotic interactions, which can be important in explaining species diversity patterns. Joint species distribution models (joint SDMs or J-SDMs) address this by modeling species co-occurrence patterns directly. The occurrence probability of a given species is thus influenced not only by abiotic drivers but also by inferred biotic associations with other species. This can improve accuracy for rarer taxa and provide insights into community ecology. Both standard SDMs and J-SDMs can be used to generate community-level metrics, such as species richness, by aggregating outputs across multiple species. These can be important for decision-making such as conservation planning. === Mechanistic SDMs === Mechanistic SDMs are more recently developed. In contrast to correlative models, mechanistic SDMs use physiological information about a species (taken from controlled field or laboratory studies) to determine the range of environmental conditions within which the species can persist. These models aim to directly characterize the fundamental niche, and to project it onto the landscape. A simple model may simply identify threshold values outside of which a species can't survive. A more complex model may consist of several sub-models, e.g. micro-climate conditions given macro-climate conditions, body temperature given micro-climate conditions, fitness or other biological rates (e.g. survival, fecundity) given body temperature (thermal performance curves), resource or energy requirements, and population dynamics. Geographically referenced environmental data are used as model inputs. Because the species distribution predictions are independent of the species' known range, these models are especially useful for species whose range is actively shifting and not at equilibrium, such as invasive species. Mechanistic SDMs incorporate causal mechanisms and are better for extrapolation and non-equilibrium situations. However, they are more labor-intensive to create than correlational models and require the collection and validation of a lot of physiological data, which may not be readily available. The models require many assumptions and parameter estimates, and they can become very complicated. Dispersal, biotic interactions, and evolutionary processes present challenges, as they aren't usually incorporated into either correlative or mechanistic models. Correlational and mechanistic models can be used in combination to gain additional insights. For example, a mechanistic model could be used to identify areas that are clearly outside the species' fundamental niche, and these areas can be marked as absences or excluded from analysis. See for a comparison between mechanistic and correlative models. == Niche models (correlative) == There are a variety of mathematical methods that can be used for fitting, selecting, and evaluating correlative SDMs. Models include "profile" methods, which are simple statistical techniques that use e.g. environmental distance to known sites of occurrence such as

  Read more →
• 

  Condensation algorithm

  The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem. The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998. One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques. The algorithm's creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The condensation algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements. == Algorithm overview == The condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector x t {\displaystyle \mathbf {x_{t}} } at time t {\displaystyle t} , given observations z 1 , . . . , z t {\displaystyle \mathbf {z_{1},...,z_{t}} } of the detected features in the images up to and including the current time. The algorithm outputs an estimate to the state conditional probability density p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method. p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model since it models the joint distribution of the object and the observer. The conditional density of the object at the current time p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is estimated as a weighted, time-indexed sample set { s t ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{t}^{(n)},n=1,...,N\}} with weights π t ( n ) {\displaystyle \pi _{t}^{(n)}} . N is a parameter determining the number of sample sets chosen. A realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is obtained by sampling with replacement from the set s t {\displaystyle s_{t}} with probability equal to the corresponding element of π t {\displaystyle \pi _{t}} . The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the condensation algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} . The model of the system dynamics determined by p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics. The algorithm can be summarized by initialization at time t = 0 {\displaystyle t=0} and three steps at each time t: === Initialization === Form the initial sample set and weights by sampling according to the prior distribution. For example, specify as Gaussian and set the weights equal to each other. === Iterative procedure === Sample with replacement N {\displaystyle N} times from the set { s 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{0}^{(n)},n=1,...,N\}} with probability { π 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{\pi _{0}^{(n)},n=1,...,N\}} to generate a realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} . Apply the learned dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} to each element of this new set, to generate a new set { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . To take into account the current observation z t {\displaystyle \mathbf {z_{t}} } , set π t ( n ) = p ( z t | s ( n ) ) ∑ j = 1 N p ( z t | s ( j ) ) {\displaystyle \pi _{t}^{(n)}={\frac {p(\mathbf {z_{t}} |s^{(n)})}{\sum _{j=1}^{N}p(\mathbf {z_{t}} |s^{(j)})}}} for each element { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . This algorithm outputs the probability distribution p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object. Cumulative weights can instead be used to achieve a more efficient sampling. == Implementation considerations == Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The condensation algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter N {\displaystyle N} , which determines the number of samples in the sample set, will clearly hold a trade-off in efficiency versus performance. One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object. Isard and Blake model the object dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} as a second order difference equation with deterministic and stochastic components: p ( x t | x t − 1 ) ∝ e − 1 2 | | B − 1 ( ( x t − x ¯ ) − A ( x t − 1 − x ¯ ) ) | | 2 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )\propto e^{-{\frac {1}{2}}||B^{-1}((\mathbf {x_{t}} -\mathbf {\bar {x}} )-A(\mathbf {x_{t-1}} -\mathbf {\bar {x}} ))||^{2})}} where x ¯ {\displaystyle \mathbf {\bar {x}} } is the mean value of the state, and A {\displaystyle A} , B {\displaystyle B} are matrices representing the deterministic and stochastic components of the dynamical model respectively. A {\displaystyle A} , B {\displaystyle B} , and x ¯ {\displaystyle \mathbf {\bar {x}} } are estimated via Maximum Likelihood Estimation while the object performs typical movements. The observation model p ( z | x ) {\displaystyle p(\mathbf {z} |\mathbf {x} )} cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density λ {\displaystyle \lambda } and that any true target measurement is unbiased and normally distributed with standard deviation σ {\displaystyle \sigma } . The basic condensation algorithm is used to track a single object in time. It is possible to extend the condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time. Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks. Smoothing cannot be directly done in real-time since it requires information of future measurements. == Applications == The algorithm can be used for vision-based robot localization of mobile robots. Instead of tracking the position of an object in the scene, however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment. Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the ran

  Read more →
• 

  Algorithm

  In mathematics and computer science, an algorithm ( ) is a finite sequence of mathematically rigorous instructions, typically used to solve a class of specific problems or to perform a computation. Algorithms are used as specifications for performing calculations and data processing. More advanced algorithms can use conditionals to divert the code execution through various routes (referred to as automated decision-making) and deduce valid inferences (referred to as automated reasoning). In contrast, a heuristic is an approach to solving problems without well-defined correct or optimal results. For example, although social media recommender systems are commonly called "algorithms", they actually rely on heuristics as there is no truly "correct" recommendation. As an effective method, an algorithm can be expressed within a finite amount of space and time and in a well-defined formal language for calculating a function. Starting from an initial state and input, a computation occurs at each step, eventually producing output and terminating. The transition between states can be non-deterministic; randomized algorithms incorporate random input. == Etymology == Around 825 AD, Persian scientist and polymath Muḥammad ibn Mūsā al-Khwārizmī wrote kitāb al-ḥisāb al-hindī ("Book of Indian computation") and kitab al-jam' wa'l-tafriq al-ḥisāb al-hindī ("Addition and subtraction in Indian arithmetic"). In the early 12th century, Latin translations of these texts involving the Hindu–Arabic numeral system and arithmetic appeared, for example Liber Alghoarismi de practica arismetrice, attributed to John of Seville, and Liber Algoritmi de numero Indorum, attributed to Adelard of Bath. Here, alghoarismi or algoritmi is the Latinization of Al-Khwarizmi's name; the text starts with the phrase Dixit Algoritmi, or "Thus spoke Al-Khwarizmi". The word algorism in English came to mean the use of place-value notation in calculations; it occurs in the Ancrene Wisse from circa 1225. By the time Geoffrey Chaucer wrote The Canterbury Tales in the late 14th century, he used a variant of the same word in describing augrym stones, stones used for place-value calculation. In the 15th century, under the influence of the Greek word ἀριθμός (arithmos, "number"; cf. "arithmetic"), the Latin word was altered to algorithmus. By 1596, this form of the word was used in English, as algorithm, by Thomas Hood. == Definition == One informal definition is "a set of rules that precisely defines a sequence of operations", which would include all computer programs, and any bureaucratic procedure or cook-book recipe. In general, a program is an algorithm only if it stops eventually. Formally, algorithm is an explicit set of instructions to produce an output, that can be followed by a computer or a human performing specific operations on symbols.. == History == === Ancient algorithms === Step-by-step procedures for solving mathematical problems have been recorded since antiquity. This includes in Babylonian mathematics (around 2500 BC), Egyptian mathematics (around 1550 BC), Indian mathematics (around 800 BC and later), the Ifa Oracle (around 500 BC), Greek mathematics (around 240 BC), Chinese mathematics (around 200 BC and later), and Arabic mathematics (around 800 AD). The earliest evidence of algorithms is found in ancient Mesopotamian mathematics. A Sumerian clay tablet found in Shuruppak near Baghdad and dated to c. 2500 BC describes the earliest division algorithm. During the Hammurabi dynasty c. 1800 – c. 1600 BC, Babylonian clay tablets described algorithms for computing formulas. Algorithms were also used in Babylonian astronomy. Babylonian clay tablets describe and employ algorithmic procedures to compute the time and place of significant astronomical events. Algorithms for arithmetic are also found in ancient Egyptian mathematics, dating back to the Rhind Mathematical Papyrus c. 1550 BC. Algorithms were later used in ancient Hellenistic mathematics. Two examples are the Sieve of Eratosthenes, which was described in the Introduction to Arithmetic by Nicomachus, and the Euclidean algorithm, which was first described in Euclid's Elements (c. 300 BC).Examples of ancient Indian mathematics included the Shulba Sutras, the Kerala School, and the Brāhmasphuṭasiddhānta. In the 9th century, Muḥammad ibn Mūsā al-Khwārizmī revolutionized the field by establishing the algorithm as a systematic, finite sequence of logical steps to solve mathematical problems. In his influential work, The Compendious Book on Calculation by Completion and Balancing, he moved beyond specific numerical solutions to introduce general procedures for algebraic reduction and balancing. This transformed mathematics into a 'mechanical' process of well-defined rules—a fundamental shift that laid the groundwork for modern algorithmic theory. The Latin translation of his arithmetic treatise, titled Algoritmi de numero Indorum, led to the term algorithm being derived from the Latinization of his name, Algoritmi, specifically to describe this new rule-based approach to mathematics. The first cryptographic algorithm for deciphering encrypted code was developed by Al-Kindi, a 9th-century Arab mathematician, in A Manuscript On Deciphering Cryptographic Messages. He gave the first description of cryptanalysis by frequency analysis, the earliest codebreaking algorithm. === Computers === ==== Weight-driven clocks ==== Weight-driven clocks were a key European invention in Middle Ages, specifically the verge escapement mechanism producing the tick of mechanical clocks. Accurate automatic machines led to mechanical automata in the 13th century and computational machines—the difference and analytical engines of Charles Babbage and Ada Lovelace in the mid-19th century. Lovelace designed the first algorithm intended for a computer, Babbage's analytical engine, the first real Turing-complete computer, more than the mechanical calculators of the time. Although the full implementation of Babbage's second device was only built decades after her lifetime, Lovelace has been called "history's first programmer". ==== Electromechanical relay ==== The Jacquard loom, a precursor to punch cards, and telephone switching machines led to the development of the first computers. By the mid-19th century, the telegraph, was in use throughout the world. By the late 19th century, ticker tape (c. 1870s) and punch cards (c. 1890) were developed. Then came the teleprinter (c. 1910) with its punched-paper use of Baudot code on tape. Telephone-switching networks of electromechanical relays were invented in 1835. These led to the invention of the digital adding device by George Stibitz in 1937. While working in Bell Laboratories, he observed the "burdensome" use of mechanical calculators with gears, prompting him to experiment create an experimental digital adder at home. === Formalization === In 1928, a partial formalization of the modern concept of algorithms began with attempts to solve David Hilbert's Entscheidungsproblem (decision problem). Later formalizations were framed as attempts to define "effective calculability" or "effective method". Those formalizations included the Gödel–Herbrand–Kleene recursive functions of 1930, 1934 and 1935, Alonzo Church's lambda calculus of 1936, Emil Post's Formulation 1 of 1936, and Alan Turing's Turing machines of 1936–37 and 1939. === Modern Algorithms === For decades, it was assumed that algorithm evolution progresses from heuristics to formal algorithms. A Symbolic integration provides a classic illustration. In 1961, James Slagle’s program SAINT used heuristics to solve 52 of 54 freshman calculus exercises from an MIT textbook (≈96%). In 1967, Larry Moses’s SIN refined the heuristics and achieved 100% success, though it remained heuristic. Finally, in 1969, Robert Risch introduced the Risch Algorithm with formal guarantees. This trajectory defined the traditional path: heuristics evolving until a definitive, guaranteed algorithm emerged. However, the rise of transformer-based AI has inverted this sequence — classical algorithms are now being displaced by heuristics once again. Algorithms have evolved and improved in many ways as time goes on. Common uses of algorithms today include social media apps like Instagram and YouTube. Algorithms are used as a way to analyze what people like and push more of those things to the people who interact with them. Quantum computing uses quantum algorithm procedures to solve problems faster. More recently, in 2024, NIST updated their post-quantum encryption standards, which includes new encryption algorithms to enhance defenses against attacks using quantum computing. == Representations == Algorithms can be expressed in many kinds of notation, including natural languages, pseudocode, flowcharts, drakon-charts, programming languages or control tables. Natural language expressions of algorithms tend to be verbose and ambiguous and are rarely used for complex or technical algor

  Read more →
• 

  Information scientist

  The term information scientist developed in the latter part of the twentieth century by Wm. Hovey Smith to describe an individual, usually with a relevant subject degree (such as one in Information and Computer Science - CIS) or high level of subject knowledge, providing focused information to scientific and technical research staff in industry. It is a role quite distinct from and complementary to that of a librarian. Developments in end-user searching, together with some convergence between the roles of librarian and information scientist, have led to a diminution in its use in this context, and the term information officer or information professional (information specialist) are also now used. The term was, and is, also used for an individual carrying out research in information science. Brian C. Vickery mentions that the Institute of Information Scientists (IIS) was established in London during 1958 and lists the criteria put forward by this institute "Criteria for Information Science" (appendix 1) as well as his own "Areas of study in information science" (appendix 2). The IIS merged with the Library Association in 2002 to form the Chartered Institute of Library and Information Professionals (CILIP). == Notable Information Scientists == See also Award of Merit - Association for Information Science and Technology Marcia Bates David Blair (information technologist) Samuel C. Bradford Michael Buckland John M. Carroll Blaise Cronin Emilia Currás Brenda Dervin Eugene Garfield Paul B. Kantor Frederick Wilfrid Lancaster Calvin Mooers Tefko Saracevic Linda C. Smith Robert Saxton Taylor Brian Campbell Vickery Thomas D. Wilson == Additional reading == Ellis, David and Merete Haugan. (1997) "Modelling the information seeking patterns of engineers and research scientists in an industrial environment" (Journal of Documentation, Volume 53(4): pp. 384–403) Poole, Alex H. (2024). "'There's a big difference between going through life with the wind at your back, and going through life leaning into the wind': Feminism in Post-World War II Information Science". Proceedings of the Association for Information Science and Technology. 61: 300–313. doi:10.1002/pra2.1029. Vickery, Brian Campbell (1988) "Essays presented to B. C. Vickery" (Journal of Documentation, Volume 44, pp. 199–283). Vickery, B. & Vickery, A. (1987) Information Science in theory and practice (London: Bowker-Saur, pp. 361–369)

  Read more →
• 

  Artificial intelligence industry in Italy

  The artificial intelligence industry in Italy is growing and supports industrial development. In 2024 it reached a new record, reaching 1.2 billion euros with a growth of +58% compared to 2023. While in 2025, the growth of artificial intelligence in the industrial application was even greater than in 2024 both in terms of value and application to industrial sectors. == History == The roots of AI research in Italy extend back to the 1970s, when Italian scholars began exploring automated reasoning, programming language semantics, and pattern recognition. Researchers such as those involved in early projects at the National Research Council and various universities laid the groundwork for subsequent academic and industrial developments in the field. During this period, the focus was predominantly on developing algorithms for automated theorem proving and building systems to reason about complex mathematical problems. This era witnessed the birth of methodologies that would later influence numerous AI subfields, from natural language processing (NLP) to robotics. === Institutional milestones and academic contributions === A turning point in the Italian AI landscape was the formation of the Italian Association for Artificial Intelligence (AIxIA) in 1988. Founded by academics, including Luigia Carlucci Aiello, the association established a platform for collaboration between universities, research centers, and industry. Led by Aiello, AIIA played a role in promoting research, organizing national conferences, and fostering international partnerships that connected Italy's AI community to global networks. At the same time, professors such as Roberto Navigli and numerous practitioners contributed to the advancement of AI in Italy. Navigli has worked in multilingual NLP, including the creation of BabelNet, and led the Minerva project. === Industrial AI === Over recent decades, numerous national and European initiatives supported by funding from programs such as the National Recovery and Resilience Plan (PNRR) have spurred the transition from theoretical research to practical applications. Industrial sectors including manufacturing, banking, and healthcare increasingly embraced AI-driven automation, while research institutions collaborated with industrial partners to deploy cutting-edge solutions. In recent years, Italy has also seen the establishment of specialized research centers and institutes aimed at bridging the gap between academic innovation and industrial application. These initiatives indicate a broader national commitment to integrating AI into the fabric of Italian industry. == Recent developments == === Emergence of generative AI === A landmark in Italy's modern AI evolution is the development of Minerva AI. Developed by the Sapienza NLP research group at Sapienza University of Rome and led by Professor Roberto Navigli, Minerva represents the first family of large language models (LLMs) trained from scratch with a primary focus on the Italian language. ==== Minerva 7B ==== The latest iteration, Minerva 7B, has 7 billion parameters and has been trained on an extensive corpus of over 1.5 trillion words. By using advanced instruction tuning techniques, Minerva 7B is able to produce highly accurate, coherent, and contextually sensitive responses addressing common issues such as hallucinations and inappropriate content generation. This breakthrough sets a benchmark for transparent, open-source AI development in the country. Minerva's development, carried out within the FAIR (Future Artificial Intelligence Research) project in collaboration with CINECA and supported by supercomputing resources like the Leonardo (supercomputer), aligns closely with Italy's cultural and linguistic heritage. === Establishment of AI4I === The recent establishment of the Istituto Italiano per l’Intelligenza Artificiale (AI4I) is part of Italy's strategy to improve its industrial competitiveness in AI. This dedicated institute aims to bridge the gap between research institutions and industrial enterprises; promote training and R&D support to nurture the next generation of Italian AI experts; and enhance national competitiveness. This initiative is expected to serve as a hub for applied AI research, driving innovations that are tailored to the specific needs of Italian industry and public administration. === Benefits of InvestAI === Italy's AI industry stands to benefit from the European InvestAI initiative, a plan unveiled at the recent AI Action Summit in Paris. InvestAI is an effort by the European Commission to mobilize €200 billion for AI investments, with a dedicated €20 billion fund earmarked for building AI gigafactories. These gigafactories are planned as large-scale hubs for training advanced, complex AI models using approximately 100,000 last-generation AI chips. For Italy, this investment presents several major opportunities: Access to State-of-the-Art Infrastructure: Italian companies, research institutions, and start-ups can leverage the gigafactories’ immense computational resources, enabling them to train highly sophisticated language models and other AI systems. Enhanced Competitiveness and Collaboration: With InvestAI's layered funding model where EU funds help de-risk private investments Italian firms can access capital more readily. This will bolster public–private partnerships and create a more dynamic AI ecosystem that spans from academic research to industrial applications. Alignment with National and Regional Initiatives: The Istituto Italiano per l’Intelligenza Artificiale (AI4I), based in Turin, is already recognized as a strategic asset by both Italy and the European Union. As the main recipient of InvestAI funds in Italy, AI4I will play a pivotal role in implementing these investments locally, fostering innovation in sectors like manufacturing, healthcare and aerospace. Commission President Ursula von der Leyen emphasized that InvestAI is designed to democratize AI innovation throughout Europe by ensuring that even smaller companies have access to high-performance computing power. For Italy, this means not only keeping pace with global leaders but also harnessing European-scale investments to transform its AI industry and drive economic growth.

  Read more →
• 

  Image warping

  Image warping is the process of digitally manipulating an image such that any shapes portrayed in the image have been significantly distorted. Warping may be used for correcting image distortion as well as for creative purposes (e.g., morphing). The same techniques are equally applicable to video. While an image can be transformed in various ways, pure warping means that points are mapped to points without changing the colors. This can be based mathematically on any function from (part of) the plane to the plane. If the function is injective the original can be reconstructed. If the function is a bijection any image can be inversely transformed. Some methods are: Images may be distorted through simulation of optical aberrations. Images may be viewed as if they had been projected onto a curved or mirrored surface. (This is often seen in ray traced images.) Images can be partitioned into image polygons and each polygon distorted. Images can be distorted using morphing. The most obvious approach to transforming a digital image is the forward mapping. This applies the transform directly to the source image, typically generating unevenly-spaced points that will then be interpolated to generate the required regularly-spaced pixels. However, for injective transforms reverse mapping is also available. This applies the inverse transform to the target pixels to find the unevenly-spaced locations in the source image that contribute to them. Estimating them from source image pixels will require interpolation of the source image. To work out what kind of warping has taken place between consecutive images, one can use optical flow estimation techniques. == Image warping toolbox == ImWIP is an open-source, image warping tool for modeling deformation and motion in digital images, which contains differentiable image warping operators, together with their exact adjoints and derivatives.

  Read more →
• 

  QuickPar

  QuickPar is a computer program that creates parchives used as verification and recovery information for a file or group of files, and uses the recovery information, if available, to attempt to reconstruct the originals from the damaged files and the PAR volumes. Designed for the Microsoft Windows operating system, in the past it was often used to recover damaged or missing files that have been downloaded through Usenet. QuickPar may also be used under Linux via Wine. There are two main versions of PAR files: PAR and PAR2. The PAR2 file format lifts many of its previous restrictions. QuickPar is freeware but not open-source. It uses the Reed-Solomon error correction algorithm internally to create the error correcting information. == Replacement == Since QuickPar hasn't been updated in 21 years, it is considered abandonware. Currently, MultiPar is accepted as the software that replaces QuickPar. MultiPar is actively being developed by Yutaka Sawada. == 64-bit versions == At present the command line version of QuickPar for Linux command line is available as a 64-bit version. None of the GUI versions available presently offer a 64-bit version.

  Read more →
• 

  Information behavior

  Information behavior is a field of information science research that seeks to understand the way people search for and use information in various contexts. It can include information seeking and information retrieval, but it also aims to understand why people seek information and how they use it. The term 'information behavior' was coined by Thomas D. Wilson in 1982 and sparked controversy upon its introduction. The term has now been adopted and Wilson's model of information behavior is widely cited in information behavior literature. In 2000, Wilson defined information behavior as "the totality of human behavior in relation to sources and channels of information". A variety of theories of information behavior seek to understand the processes that surround information seeking. An analysis of the most cited publications on information behavior during the early 21st century shows its theoretical nature. Information behavior research can employ various research methodologies grounded in broader research paradigms from psychology, sociology and education. In 2003, a framework for information-seeking studies was introduced that aims to guide the production of clear, structured descriptions of research objects and positions information-seeking as a concept within information behavior. == Concepts of information behavior == === Information need === Information need is a concept introduced by Wilson. Understanding the information need of an individual involved three elements: Why the individual decides to look for information, What purpose the information they find will serve, and How the information is used once it is retrieved === Information-seeking behavior === Information-seeking behavior is a more specific concept of information behavior. It specifically focuses on searching, finding, and retrieving information. Information-seeking behavior research can focus on improving information systems or, if it includes information need, can also focus on why the user behaves the way they do. A review study on information search behavior of users highlighted that behavioral factors, personal factors, product/service factors and situational factors affect information search behavior. Information-seeking behavior can be more or less explicit on the part of users: users might seek to solve some task or to establish some piece of knowledge which can be found in the data in question, or alternatively the search process itself is part of the objective of the user, in use cases for exploring visual content or for familiarising oneself with the content of an information service. In the general case, information-seeking needs to be understood and analysed as a session rather than as a one-off transaction with a search engine, and in a broader context which includes user high-level intentions in addition to the immediate information need. === Information use === An information need is the recognition that a gap exists in one’s knowledge, prompting a desire to seek information to fill that gap. It often arises when a person encounters a problem or question they cannot resolve with their current understanding. === Information poverty and barriers === Introduced by Elfreda Chatman in 1987, information poverty is informed by the understanding that information is not equally accessible to all people. Information poverty does not describe a lack of information, but rather a worldview in which one's own experiences inside their own small world may create a distrust in the information provided by those outside their own lived experiences. == Metatheories == In Library and Information Science (LIS), a metatheory is described "a set of assumptions that orient and direct theorizing about a given phenomenon". Library and information science researchers have adopted a number of different metatheories in their research. A common concern among LIS researchers, and a prominent discussion in the field, is the broad spectrum of theories that inform the study of information behavior, information users, or information use. This variation has been noted as a cause of concern because it makes individual studies difficult to compare or synthesize if they are not guided by the same theory. This sentiment has been expressed in studies of information behavior literature from the early 1980s and more recent literature reviews have declared it necessary to refine their reviews to specific contexts or situations due to the sheer breadth of information behavior research available. Below are descriptions of some, but not all, metatheories that have guided LIS research. === Cognitivist approach === A cognitive approach to understanding information behavior is grounded in psychology. It holds the assumption that a person's thinking influences how they seek, retrieve, and use information. Researchers that approach information behavior with the assumption that it is influenced by cognition, seek to understand what someone is thinking while they engage in information behavior and how those thoughts influence their behavior. Wilson's attempt to understand information-seeking behavior by defining information need includes a cognitive approach. Wilson theorizes that information behavior is influenced by the cognitive need of an individual. By understanding the cognitive information need of an individual, we may gain insight into their information behavior. Nigel Ford takes a cognitive approach to information-seeking, focusing on the intellectual processes of information-seeking. In 2004, Ford proposed an information-seeking model using a cognitive approach that focuses on how to improve information retrieval systems and serves to establish information-seeking and information behavior as concepts in and of themselves, rather than synonymous terms. === Constructionist approach === The constructionist approach to information behavior has roots in the humanities and social sciences. It relies on social constructionism, which assumes that a person's information behavior is influenced by their experiences in society. In order to understand information behavior, constructionist researchers must first understand the social discourse that surrounds the behavior. The most popular thinker referenced in constructionist information behavior research is Michel Foucault, who famously rejected the concept of a universal human nature. The constructionist approach to information behavior research creates space for contextualizing the behavior based on the social experiences of the individual. One study that approaches information behavior research through the social constructionist approach is a study of the information behavior of a public library knitting group. The authors use a collectivist theory to frame their research, which denies the universality of information behavior and focuses on "understanding the ways that discourse communities collectively construct information needs, seeking, sources, and uses". === Constructivist approach === The constructivist approach is born out of education and sociology in which, "individuals are seen as actively constructing an understanding of their worlds, heavily influenced by the social world(s) in which they are operating". Constructivist approaches to information behavior research generally treat the individual's reality as constructed within their own mind rather than built by the society in which they live. The constructivist metatheory makes space for the influence of society and culture with social constructivism, "which argues that, while the mind constructs reality in its relationship to the world, this mental process is significantly informed by influences received from societal conventions, history and interaction with significant others". == Theories == A common concern among LIS researchers, and a prominent discussion in the field, is the broad spectrum of theories that inform LIS research. This variation has been noted as a cause of concern because it makes individual studies difficult to compare if they are not guided by the same theory. Recent studies have shown that the impact of these theories and theoretical models is very limited. LIS researchers have applied concepts and theories from many disciplines, including sociology, psychology, communication, organizational behavior, and computer science. === Wilson's theory of information behavior (1981) === The term was coined by Thomas D. Wilson in his 1981 paper, on the grounds that the current term, 'information needs' was unhelpful since 'need' could not be directly observed, while how people behaved in seeking information could be observed and investigated. However, there is increasing work in the information-searching field that is relating behaviors to underlying needs. In 2000, Wilson described information behavior as the totality of human behavior in relation to sources and channels of information, including both active and passive information-seeking, and information use. He described info

  Read more →
• 

  Metadata management

  Metadata management involves managing metadata about other data, whereby this "other data" is generally referred to as content data. The term is used most often in relation to digital media, but older forms of metadata are catalogs, dictionaries, and taxonomies. For example, the Dewey Decimal Classification is a metadata management system developed in 1876 for libraries. == Metadata schema == Metadata management goes by the end-to-end process and governance framework for creating, controlling, enhancing, attributing, defining and managing a metadata schema, model or other structured aggregation system, either independently or within a repository and the associated supporting processes (often to enable the management of content). For web-based systems, URLs, images, video etc. may be referenced from a triples table of object, attribute and value. == Scope == With specific knowledge domains, the boundaries of the metadata for each must be managed, since a general ontology is not useful to experts in one field whose language is knowledge-domain specific. == Metadata Manager == In the process of developing a knowledge management solution, creating a metadata schema, and a system in which metadata is managed, a dedicated resource may be appointed to maintain adherence to metadata standards as defined by data owners as well as general best practice. This person is responsible for curation of the business and technical layers of the metadata schema, and commonly involved with strategy and implementation. A metadata manager is not required to master all aspects, or be involved with everything concerning the solution, but an understanding of as much of the process as possible to ensure a relevant schema is developed. == Metadata management over time == Managing the metadata in a knowledge management solution is an important step in a metadata strategy. It is part of the strategy to make sure that the metadata are complete, current and correct at any given time. Managing a metadata project is also about making sure that users of the system are aware of the possibilities allowed by a well-designed metadata system and how to maximize the benefits of metadata. Regularly monitoring the metadata to ensure that the schema remains relevant is advised. === Wikipedia metadata === Wikipedia is a project that actively manages metadata for its articles and files. For example, volunteer editors carefully curate new biographical articles based on the notability (claim to fame), name, birth, and/or death dates. Similarly, volunteer editors carefully curate new architectural articles based on name, municipality, or geo coordinates. When new articles with a valid alternate spelling are added to Wikipedia that match up to existing articles based on metadata, these are then manually checked and if needed, tagged for merging. When new articles are added that are considered out of scope or otherwise unfit for Wikipedia, these are nominated for deletion. To help keep track of metadata on Wikipedia, the new Wikimedia project Wikidata was established in 2012. Click on the pictures to view more metadata about these images:

  Read more →
• 

  Machine-learned interatomic potential

  Machine-learned interatomic potentials (MLIPs), or simply machine learning potentials (MLPs), are interatomic potentials constructed using machine learning. Beginning in the 1990s, researchers have employed such programs to construct interatomic potentials by mapping atomic structures to their potential energies. These potentials are referred to as MLIPs or MLPs. Such machine learning potentials promised to fill the gap between density functional theory, a highly accurate but computationally intensive modelling method, and empirically derived or intuitively-approximated potentials, which were far lighter computationally but substantially less accurate. Improvements in artificial intelligence technology heightened the accuracy of MLPs while lowering their computational cost, increasing the role of machine learning in fitting potentials. Machine learning potentials began by using neural networks to tackle low-dimensional systems. While promising, these models could not systematically account for interatomic energy interactions; they could be applied to small molecules in a vacuum, or molecules interacting with frozen surfaces, but not much else – and even in these applications, the models often relied on force fields or potentials derived empirically or with simulations. These models thus remained confined to academia. Modern neural networks construct highly accurate and computationally light potentials, as theoretical understanding of materials science was increasingly built into their architectures and preprocessing. Almost all are local, accounting for all interactions between an atom and its neighbor up to some cutoff radius. There exist some nonlocal models, but these have been experimental for almost a decade. For most systems, reasonable cutoff radii enable highly accurate results. Almost all neural networks intake atomic coordinates and output potential energies. For some, these atomic coordinates are converted into atom-centered symmetry functions. From this data, a separate atomic neural network is trained for each element; each atomic network is evaluated whenever that element occurs in the given structure, and then the results are pooled together at the end. This process – in particular, the atom-centered symmetry functions which convey translational, rotational, and permutational invariances – has greatly improved machine learning potentials by significantly constraining the neural network search space. Other models use a similar process but emphasize bonds over atoms, using pair symmetry functions and training one network per atom pair. Other models to learn their own descriptors rather than using predetermined symmetry-dictating functions. These models, called message-passing neural networks (MPNNs), are graph neural networks. Treating molecules as three-dimensional graphs (where atoms are nodes and bonds are edges), the model takes feature vectors describing the atoms as input, and iteratively updates these vectors as information about neighboring atoms is processed through message functions and convolutions. These feature vectors are then used to predict the final potentials. The flexibility of this method often results in stronger, more generalizable models. In 2017, the first-ever MPNN model (a deep tensor neural network) was used to calculate the properties of small organic molecules. == Gaussian Approximation Potential (GAP) == One popular class of machine-learned interatomic potential is the Gaussian Approximation Potential (GAP), which combines compact descriptors of local atomic environments with Gaussian process regression to machine learn the potential energy surface of a given system. To date, the GAP framework has been used to successfully develop a number of MLIPs for various systems, including for elemental systems such as carbon, silicon, phosphorus, and tungsten, as well as for multicomponent systems such as Ge2Sb2Te5 and austenitic stainless steel, Fe7Cr2Ni. == Equivariant graph neural networks == A significant limitation of early MPNNs was that they were not inherently equivariant to rotations and reflections of atomic structures — meaning predictions could change depending on how a molecule was oriented in space. Beginning around 2021, a new class of models addressed this by incorporating equivariance directly into the message-passing layers using spherical harmonics and irreducible representations. Notable examples include NequIP (2021), MACE (2022), and GemNet-OC (2022). These equivariant architectures proved substantially more data-efficient and accurate than their predecessors, and became the dominant paradigm for high-accuracy MLIPs. == Universal MLIPs and large-scale datasets == Early MLIPs were system-specific, trained on a few thousand structures of a single material. A major shift occurred with the creation of large, chemically diverse datasets enabling models that generalize across many elements, bonding environments, and application domains — so-called universal MLIPs. A key driver was the Open Catalyst Project (OC20, OC22), a collaboration between Meta AI (FAIR) and Carnegie Mellon University launched in 2020. OC20 comprises approximately 1.3 million DFT relaxations across 82 elements, designed to accelerate the discovery of catalysts for renewable energy applications. It was among the first datasets large enough to train GNNs that generalize across diverse chemical systems, and established a widely-used benchmark for the field. A subsequent dataset, Open Direct Air Capture (OpenDAC 2023 and OpenDAC 2025), applied the same approach to carbon capture, providing a large computational database of metal-organic frameworks and sorbent candidates evaluated for CO₂ capture, generated using nearly 400 million CPU hours of quantum chemistry calculations in collaboration with Georgia Tech. These datasets revealed a new challenge: the GNN architectures most effective for atomic simulations were memory-intensive, as they model higher-order interactions between triplets or quadruplets of atoms, making it difficult to scale model size. Graph Parallelism, introduced by Sriram et al. (ICLR 2022), addressed this by distributing a single input graph across multiple GPUs — a distinct strategy from data parallelism (which distributes training examples) or model parallelism (which distributes layers). This enabled training GNNs with hundreds of millions to billions of parameters for the first time. Building on these foundations, Meta FAIR released the Universal Model for Atoms (UMA) in 2025, trained on approximately 500 million unique 3D atomic structures spanning molecules, materials, and catalysts — the largest training run to date for an MLIP. UMA introduced a Mixture of Linear Experts (MoLE) architecture, enabling one model to learn from datasets generated by different DFT codes and settings without significant inference overhead. It matches or surpasses specialized models across catalysis, materials, and molecular benchmarks without task-specific fine-tuning, and has been described as marking a "pre/post-UMA" divide in the field. == Applications == Catalyst discovery: MLIPs have significantly accelerated the computational screening of heterogeneous catalysts by replacing expensive DFT relaxations with fast neural network surrogates. The Open Catalyst Project explicitly targets this application, aiming to identify new catalysts for green hydrogen production and other renewable energy reactions. Carbon capture: The OpenDAC project applies universal MLIPs to screening sorbent materials for direct air capture of CO₂, a key technology for climate change mitigation. AI-accelerated screening allows evaluation of orders of magnitude more candidate materials than traditional DFT workflows. Drug discovery and molecular design: MLIPs are increasingly used in pharmaceutical research to model molecular conformations and binding energies. The Open Molecules 2025 (OMol25) dataset, released by Meta FAIR in 2025, provides high-accuracy calculations for a large set of molecular systems to support this use case. Materials discovery: Universal MLIPs enable high-throughput screening of novel inorganic materials, including battery electrolytes, semiconductors, and superconductors, by rapidly estimating stability and properties across large chemical spaces.

  Read more →
• 

  Small data

  Small data is data that is 'small' enough for human comprehension. It is data in a volume and format that makes it accessible, informative and actionable. The term "big data" is about machines and "small data" is about people. This is to say that eyewitness observations or five pieces of related data could be small data. Small data is what we used to think of as data. The only way to comprehend Big data is to reduce the data into small, visually-appealing objects representing various aspects of large data sets (such as histogram, charts, and scatter plots). Big Data is all about finding correlations, but Small Data is all about finding the causation, the reason why. A formal definition of small data has been proposed by Allen Bonde, former vice-president of Innovation at Actuate - now part of OpenText: "Small data connects people with timely, meaningful insights (derived from big data and/or “local” sources), organized and packaged – often visually – to be accessible, understandable, and actionable for everyday tasks." Another definition of small data is: The small set of specific attributes produced by the Internet of Things. These are typically a small set of sensor data such as temperature, wind speed, vibration and status. It was estimated (2016) that “If one takes the top 100 biggest innovations of our time, perhaps around 60% to 65% percent are really based on Small Data.” as Martin Lindstrom puts it. Small data includes everything from Snapchat to simple objects such as the post-it note. Lindstrom believes we become so focused on Big-Data that we tend to forget about more basic concepts and creativity. Lindstrom defines Small Data "as seemingly insignificant observations you identify in consumers’ homes, is everything from how you place your shoes on how you hang your paintings". He thus considers that one should perfectly master the basic (Small Data) in order to mine and find correlations. == Academic Recognition and Methodology == The growing significance of "small data" as a distinct field of inquiry was highlighted by the 2024 Thematic Einstein Semester (TES) on Small Data Analysis, hosted by the Berlin Mathematics Research Center MATH+. A central focus of this semester was the transition from theoretical analysis to practical decision-making. Because small data sets are primarily used to drive specific actions, the presentation of results becomes an essential methodological step. The semester’s findings emphasized that while small data may lack volume, it often contains a high density of "many possible interpretations." Consequently, the final conference of the TES was structured around the pillars of interpretation, explanation, and knowledge gain. Participants sought to develop new mathematical and methodical representations that could accurately depict this wealth of interpretative possibilities. This work underscores that analyzing small data is not purely a computational task; it requires a robust interface between mathematics and diverse disciplines to ensure that insights are both contextually grounded and scientifically rigorous. == Uses in business == === Marketing === Bonde has written about the topic for Forbes, Direct Marketing News, CMO.com and other publications. According to Martin Lindstrom, in his book, Small Data: "{In customer research, small data is} Seemingly insignificant behavioural observations containing very specific attributes pointing towards an unmet customer need. Small data is the foundation for breakthrough ideas or completely new ways to turnaround brands." His approach is based on the combination of the observation of small samples with intuition. Marketers can obtain market insights from gathering Small Data by engaging with and observing people in their own environments. In comparison to Big Data, Small Data has the power to trigger emotions and to provide insights into the reasons behind the behaviours of customers. It may uncover detailed information on a person's extroversion or introversion, self-confidence, whether one is having problems in his/her relationship, etc. According to Lindstrom, relationships among people and customer segments are organized around four criteria: Climate: It reveals for example how a person's environment affects their diet. Rulership: The power or government in charge Religion: The prevalence of religion in a country, depending on its influence, indicates whether a person's decision making process is impacted by their belief system. Tradition: Cultural norms influence people's behaviors and interactions. Many companies underestimate the power of Small Data, using samples of millions of consumers instead of recognizing the value of closely observing small samples in their market research. In his book, Lindstrom defines "7Cs", which companies should consider in the attempt to derive meaningful customer insights and market trends through small data from their customers: Collecting: Understanding the manner in which observations are translated inside a home. Clues: Uncovering other distinctive emotional reflections that can be observed. Connecting: Identifying the consequences of emotional behaviour. Causation: Understanding what emotions are being evoked. Correlation: Identifying the initial date of appearance of the behaviour or emotion. Compensation: Identifying the unmet or unfulfilled desire. Concept: Defining the “big idea” compensation for the identified consumer need. Some of Lindstrom's clients such as Lowes Foods looked at data in a different way and actually chose to live with the customer. “As you enter their store, they have now created an amazing community where every staff member acts in a character mood, based on Small Data”. The supermarket made everything it can to make the customer feel at home. All the behaviours of employees are inspired by customer feedbacks gathered from interviews directly done at customer’s home. === Healthcare === Researchers at Cornell University started developing applications to monitor health problems in patients, based on small data. This is an initiative of Cornell's Small Data Lab, in close cooperation with Weill Cornell Medicine College, led by Deborah Estrin. The Small Data Lab developed a series of apps, focusing not only on gathering data from patients' pain but also tracking habits in areas such as grocery shopping. In the case of patients with rheumatoid arthritis for example, which has flares and remissions that do not follow a particular cycle, the app gathers information passively, thus allowing to forecast when a flare might be coming up based on small changes in behaviour. Other apps developed also include monitoring online grocery shopping, to use this information from every user to adapt their groceries to the recommendations of nutritionists, or monitoring email language to identify patterns that might indicate "fluctuations in cognitive performance, fatigue, side effects of medication or poor sleep, and other conditions and treatments that are typically self-reported and self-medicated". === Postal Service === The United States Postal Service (USPS) used optical character recognition (OCR) to automatically read and process 98% of all hand-addressed mail and 99.5% of machine-printed mail. By combining this technology with its small data sample of US zip codes, the USPS can now process more than 36,000 pieces of mail per hour. === Aerospace === In 2015, Boeing established the analytics lab for aerospace data in cooperation with the Carnegie Mellon University to leverage the university's leadership in machine learning, language technologies and data analytics. One of the initiatives projects aims to by standardize maintenance logs using AI to dramatically reduce costs. Currently, there is no standardized procedure to document maintenance logs leading to small but highly unstructured data sets. As a result, it becomes highly difficult for maintenance workers to translate these variations in maintenance logs within a short period of time. However, with AI and a narrow data set of common aircraft maintenance terminology, it becomes possible to dynamically translate these logs in real time. By using AI to enhance the speed and accuracy of the airline maintenance workflow, airlines stand to save billions according to the Harvard Business Review.

  Read more →
• 

  UI data binding

  UI data binding is a software design pattern to simplify development of GUI applications. UI data binding binds UI elements to an application domain model. Most frameworks employ the Observer pattern as the underlying binding mechanism. To work efficiently, UI data binding has to address input validation and data type mapping. A bound control is a widget whose value is tied or bound to a field in a recordset (e.g., a column in a row of a table). Changes made to data within the control are automatically saved to the database when the control's exit event triggers. == Example == == Data binding frameworks and tools == === Delphi === DSharp third-party data binding tool OpenWire Visual Live Binding - third-party visual data binding tool === Java === JFace Data Binding JavaFX Property === .NET === Windows Forms data binding overview WPF data binding overview Avalonia Unity 3D data binding framework (available in modifications for NGUI, iGUI and EZGUI libraries) === JavaScript === Angular AngularJS Backbone.js Ember.js Datum.js knockout.js Meteor, via its Blaze live update engine OpenUI5 React Vue.js

  Read more →