AI For Students Exam Generator

AI For Students Exam Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Supervisor Mode Access Prevention

  Supervisor Mode Access Prevention (SMAP) is a feature of some CPU implementations such as the Intel Broadwell microarchitecture that allows supervisor mode programs to optionally set user-space memory mappings so that access to those mappings from supervisor mode will cause a trap. This makes it harder for malicious programs to "trick" the kernel into using instructions or data from a user-space program. == History == Supervisor Mode Access Prevention is designed to complement Supervisor Mode Execution Prevention (SMEP), which was introduced earlier. SMEP can be used to prevent supervisor mode from unintentionally executing user-space code. SMAP extends this protection to reads and writes. == Benefits == Without Supervisor Mode Access Prevention, supervisor code usually has full read and write access to user-space memory mappings (or has the ability to obtain full access). This has led to the development of several security exploits, including privilege escalation exploits, which operate by causing the kernel to access user-space memory when it did not intend to. Operating systems can block these exploits by using SMAP to force unintended user-space memory accesses to trigger page faults. Additionally, SMAP can expose flawed kernel code which does not follow the intended procedures for accessing user-space memory. However, the use of SMAP in an operating system may lead to a larger kernel size and slower user-space memory accesses from supervisor code, because SMAP must be temporarily disabled any time supervisor code intends to access user-space memory. == Technical details == Processors indicate support for Supervisor Mode Access Prevention through the Extended Features CPUID leaf. SMAP is enabled when memory paging is active and the SMAP bit in the CR4 control register is set. SMAP can be temporarily disabled for explicit memory accesses by setting the EFLAGS.AC (Alignment Check) flag. The stac (Set AC Flag) and clac (Clear AC Flag) instructions can be used to easily set or clear the flag. When the SMAP bit in CR4 is set, explicit memory reads and writes to user-mode pages performed by code running with a privilege level less than 3 will always result in a page fault if the EFLAGS.AC flag is not set. Implicit reads and writes (such as those made to descriptor tables) to user-mode pages will always trigger a page fault if SMAP is enabled, regardless of the value of EFLAGS.AC. == Operating system support == Linux kernel support for Supervisor Mode Access Prevention was implemented by H. Peter Anvin. It was merged into the mainline Linux 3.7 kernel (released December 2012) and it is enabled by default for processors which support the feature. FreeBSD has supported Supervisor Mode Execution Prevention since 2012 and Supervisor Mode Access Prevention since 2018. OpenBSD has supported Supervisor Mode Access Prevention and the related Supervisor Mode Execution Prevention since 2012, with OpenBSD 5.3 being the first release with support for the feature enabled. NetBSD support for Supervisor Mode Execution Prevention (SMEP) was implemented by Maxime Villard in December 2015. Support for Supervisor Mode Access Prevention (SMAP) was also implemented by Maxime Villard, in August 2017. NetBSD 8.0 was the first release with both features supported and enabled. Haiku support for Supervisor Mode Execution Prevention (SMEP) was implemented by Jérôme Duval in January 2018. macOS has support for SMAP at least since macOS 10.13 released 2017.

  Read more →
• 

  Geo-replication

  Geo-replication systems are designed to provide improved availability and disaster tolerance by using geographically distributed data centers. This is intended to improve the response time for applications such as web portals. Geo-replication can be achieved using software, hardware or a combination of the two. == Software == Geo-replication software is a network performance-enhancing technology that is designed to provide improved access to portal or intranet content for users at the most remote parts of large organizations. It is based on the principle of storing complete replicas of portal content on local servers, and then keeping the content on those servers up-to-date using heavily compressed data updates. === Portal acceleration === Geo-replication technologies are used to provide replication of the content of portals, intranets, web applications, content and data between servers, across wide area networks WAN to allow users at remote sites to access central content at LAN speeds. Geo-replication software can improve the performance of data networks that suffer limited bandwidth, latency and periodic disconnection. Terabytes of data can be replicated over a wide area network, giving remote sites faster access to web applications. Geo-replication software uses a combination of data compression and content caching technologies. differencing technologies can also be employed to reduce the volume of data that has to be transmitted to keep portal content accurate across all servers. This update compression can reduce the load that portal traffic places on networks, and improve the response time of a portal. === Portal replication === Remote users of web portals and collaboration environments will frequently experience network bandwidth and latency problems which will slow down their experience of opening and closing files, and otherwise interacting with the portal. Geo-replication technology is deployed to accelerate the remote end user portal performance to be equivalent to that experienced by users locally accessing the portal in the central office. === Differencing engine technologies === To deliver this reduction in the size of the required data updates across a portal, geo-replication systems often use differencing engine technologies. These systems are able to difference the content of each portal server right down to the byte level. This knowledge of the content that is already on each server enables the system to rebuild any changes to the content on one server, across each of the other servers in the deployment from content already hosted on those other servers. This type of differencing system ensures that no content, at the byte level, is ever sent to a server twice. === Offline portal replication on laptops === Geo-replication systems are often extended to deliver local replication beyond the server and down to the laptop used by a single user. Server to laptop replication enables mobile users to have access to a local replica of their business portal on a standard laptop. This technology may be employed to provide in the field access to portal content by, for example, sales forces and combat forces. == Geo-replication systems ==

  Read more →
• 

  Excalidraw

  Excalidraw is an open-source, web-based virtual whiteboard and diagramming application. It is used to create diagrams, wireframes, and sketches within a web browser without requiring account registration. The software features a characteristic hand-drawn visual style and supports real-time multi-user collaboration using client-side end-to-end encryption. Excalidraw is released under the MIT License and is maintained by Excalidraw s.r.o., a company based in Brno, Czech Republic. == History == Excalidraw was created on 1 January 2020 by Christopher Chedeau, a software engineer at Meta Platforms. Chedeau, who previously co-created React Native and Prettier, initially developed the application as a personal project before registering the domain on 3 January 2020. Within its first months, the project attracted open-source contributors who assisted in expanding its features and rewriting the codebase into TypeScript and React. By early 2021, day-to-day operations moved to Czech developers David Luzar and Milos Vetesnik. In May 2021, the team incorporated Excalidraw s.r.o. in Brno and launched a commercial cloud-based version named Excalidraw+ to fund the open-source project's development. By May 2026, the main open-source repository on GitHub had accumulated over 123,000 stars. == Features and architecture == The application provides an infinite canvas for geometric shapes, lines, arrows, text, and freehand drawing. Its visual presentation relies on Rough.js, a JavaScript graphics library that alters standard vector paths to mimic irregular, hand-drawn lines. Excalidraw operates as a Progressive web application (PWA), allowing local installation and offline usage, saving data natively to local browser storage. Files use a native, JSON-based extension format (.excalidraw), and canvases can be exported to PNG or SVG formats. Real-time collaboration sessions are executed using Socket.IO via a relay server. Data transmission uses the browser's native Web Cryptography API to achieve end-to-end encryption. A symmetric AES key is generated on the client side and appended to the sharing URL as a fragment identifier (following the # character). Because web browsers do not transmit URL fragments to HTTP servers, the data remains unreadable to the distribution server. == Ecosystem == Excalidraw is distributed as an npm package, allowing third-party developers to embed the whiteboard component directly into external React web applications. Community-developed extensions integrate the application's file format into text editors and note-taking systems, including Visual Studio Code and Obsidian. The platform also has native integrations in commercial platforms such as Notion and HackerRank. == Reception == Google's developer relations team published a technical case study on Excalidraw as a reference implementation for Progressive Web Apps. The analysis highlighted the software's adoption of advanced web platform capabilities, specifically its utilization of the File System Access API and native Clipboard API to replicate desktop software behavior within a web browser environment.

  Read more →
• 

  Scikit-learn

  scikit-learn (formerly scikits.learn and also known as sklearn) is a free and open-source machine learning library for the Python programming language. It features various classification, regression and clustering algorithms including support-vector machines, random forests, gradient boosting, k-means and DBSCAN, and is designed to interoperate with the Python numerical and scientific libraries NumPy and SciPy. Scikit-learn is a NumFOCUS fiscally sponsored project. == Overview == The scikit-learn project started as scikits.learn, a Google Summer of Code project by French data scientist David Cournapeau. The name of the project derives from its role as a "scientific toolkit for machine learning", originally developed and distributed as a third-party extension to SciPy. The original codebase was later rewritten by other developers. In 2010, contributors Fabian Pedregosa, Gaël Varoquaux, Alexandre Gramfort and Vincent Michel, from the French Institute for Research in Computer Science and Automation in Saclay, France, took leadership of the project and released the first public version of the library on February 1, 2010. In November 2012, scikit-learn as well as scikit-image were described as two of the "well-maintained and popular" scikits libraries. In 2019, it was noted that scikit-learn is one of the most popular machine learning libraries on GitHub. At that time, the project had over 1,400 contributors and the documentation received 42 million visits in 2018. According to a 2022 Kaggle survey of nearly 24,000 respondents from 173 countries, scikit-learn was identified as the most widely used machine learning framework. == Features == Large catalogue of well-established machine learning algorithms and data pre-processing methods (i.e. feature engineering) Utility methods for common data-science tasks, such as splitting data into train and test sets, cross-validation and grid search Consistent way of running machine learning models (estimator.fit() and estimator.predict()), which libraries can implement Declarative way of structuring a data science process (the Pipeline), including data pre-processing and model fitting == Examples == Fitting a random forest classifier: == Implementation == scikit-learn is largely written in Python, and uses NumPy extensively for high-performance linear algebra and array operations. Furthermore, some core algorithms are written in Cython to improve performance. Support vector machines are implemented by a Cython wrapper around LIBSVM; logistic regression and linear support vector machines by a similar wrapper around LIBLINEAR. In such cases, extending these methods with Python may not be possible. scikit-learn integrates well with many other Python libraries, such as Matplotlib and plotly for plotting, NumPy for array vectorization, Pandas dataframes, SciPy, and many more. == History == scikit-learn was initially developed by David Cournapeau as a Google Summer of Code project in 2007. Later that year, Matthieu Brucher joined the project and started to use it as a part of his thesis work. In 2010, INRIA, the French Institute for Research in Computer Science and Automation, got involved and the first public release (v0.1 beta) was published in late January 2010. The project released its first stable version, 1.0.0, on September 24, 2021. The release was the result of over 2,100 merged pull requests, approximately 800 of which were dedicated to improving documentation. Development continues to focus on bug fixes, efficiency and feature expansion. The latest version, 1.8, was released on December 10, 2025. This update introduced native Array API support, enabling the library to perform GPU computations by directly using PyTorch and CuPy arrays. This version also included bug fixes, improvements and new features, such as efficiency improvements to the fit time of linear models. == Applications == Scikit-learn is widely used across industries for a variety of machine learning tasks such as classification, regression, clustering, and model selection. The following are real-world applications of the library: === Finance and Insurance === AXA uses scikit-learn to speed up the compensation process for car accidents and to detect insurance fraud. Zopa, a peer-to-peer lending platform, employs scikit-learn for credit risk modelling, fraud detection, marketing segmentation, and loan pricing. BNP Paribas Cardif uses scikit-learn to improve the dispatching of incoming mail and manage internal model risk governance through pipelines that reduce operational and overfitting risks. J.P. Morgan reports broad usage of scikit-learn across the bank for classification tasks and predictive analytics in financial decision-making. === Retail and E-Commerce === Booking.com uses scikit-learn for hotel and destination recommendation systems, fraudulent reservation detection, and workforce scheduling for customer support agents. HowAboutWe uses it to predict user engagement and preferences on a dating platform. Lovely leverages the library to understand user behaviour and detect fraudulent activity on its platform. Data Publica uses it for customer segmentation based on the success of past partnerships. Otto Group integrates scikit-learn throughout its data science stack, particularly in logistics optimization and product recommendations. === Media, Marketing, and Social Platforms === Spotify applies scikit-learn in its recommendation systems. Betaworks uses the library for both recommendation systems (e.g., for Digg) and dynamic subspace clustering applied to weather forecasting data. PeerIndex used scikit-learn for missing data imputation, tweet classification, and community clustering in social media analytics. Bestofmedia Group employs it for spam detection and ad click prediction. Machinalis utilizes scikit-learn for click-through rate prediction and relational information extraction for content classification and advertising optimization. Change.org applies scikit-learn for targeted email outreach based on user behaviour. === Technology === AWeber uses scikit-learn to extract features from emails and build pipelines for managing large-scale email campaigns. Solido applies it to semiconductor design tasks such as rare-event estimation and worst-case verification using statistical learning. Evernote, Dataiku, and other tech companies employ scikit-learn in prototyping and production workflows due to its consistent API and integration with the Python ecosystem. === Academia === Télécom ParisTech integrates scikit-learn in hands-on coursework and assignments as part of its machine learning curriculum. == Awards == 2019 Inria-French Academy of Sciences-Dassault Systèmes Innovation Prize: Awarded in recognition of scikit-learn's impact as a major free software breakthrough in machine learning and its role in the digital transformation of science and industry. 2022 Open Science Award for Open Source Research Software: Awarded by the French Ministry of Higher Education and Research as part of the second National Plan for Open Science. The project was recognized in the "Community" category for its technical quality, its large international contributor network, and the quality of its documentation.

  Read more →
• 

  Tiki Wiki CMS Groupware

  Tiki Wiki CMS Groupware or simply Tiki, originally known as TikiWiki, is a free and open source Wiki-based content management system and online office suite written primarily in PHP and distributed under the GNU Lesser General Public License (LGPL-2.1-only) license. In addition to enabling websites and portals on the internet and on intranets and extranets, Tiki contains a number of collaboration features allowing it to operate as a Geospatial Content Management System (GeoCMS) and Groupware web application. Tiki includes all the basic features common to most CMSs such as the ability to register and maintain individual user accounts within a flexible and rich permission / privilege system, create and manage menus, RSS-feeds, customize page layout, perform logging, and administer the system. All administration tasks are accomplished through a browser-based user interface. Tiki features an all-in-one design, as opposed to a core+extensions model followed by other CMSs. This allows for future-proof upgrades (since all features are released together), but has the drawback of an extremely large codebase (more than 1,000,000 lines). Tiki can run on any computing platform that supports both a web server capable of running PHP 5 (including Apache HTTP Server, IIS, Lighttpd, Hiawatha, Cherokee, and nginx) and a MySQL/MariaDB database to store content and settings. == Major components == Tiki has four major categories of components: content creation and management tools, content organization tools and navigation aids, communication tools, and configuration and administration tools. These components enable administrators and users to create and manage content, as well as letting them communicate to others and configure sites. In addition, Tiki allows each user to choose from various visual themes. These themes are implemented using CSS and the open source Smarty template engine. Additional themes can be created by a Tiki administrator for branding or customization as well. == Internationalization == Tiki is an international project, supporting many languages. The default interface language in Tiki is English, but any language that can be encoded and displayed using the UTF-8 encoding can be supported. Translated strings can be included via an external language file, or by translating interface strings directly, through the database. As of 29 September 2005, Tiki had been fully translated into eight languages and reportedly 90% or more translated into another five languages, as well as partial translations for nine additional languages. Tiki also supports interactive translation of actual wiki pages and was the initial wiki engine used in the Cross Lingual Wiki Engine Project. This allows Tiki-based web sites to have translated content — not just the user interface. == Implementation == Tiki is developed primarily in PHP with some JavaScript code. It uses MySQL/MariaDB as a database. It will run on any server that provides PHP 5, including Apache and Microsoft's IIS. Tiki components make extensive use of other open source projects, including Zend Framework, Smarty, jQuery, HTML Purifier, FCKeditor, Raphaël, phpCAS, and Morcego. When used with Mapserver Tiki can become a Geospatial Content Management System. == Project team == Tiki is under active development by a large international community of over 300 developers and translators, and is one of the largest open-source teams in the world. Project members have donated the resources and bandwidth required to host the tiki.org website and various subdomains. The project members refer to this dependence on their own product as "eating their own dogfood", which they have been doing since the early days of the project. Tiki community members also participate in various related events such as WikiSym and the Libre Software Meeting. == History == Tiki has been hosted on SourceForge.net since its initial release (Release 0.9, named Spica) in October 2002. It was primarily the development of Luis Argerich (Buenos Aires, Argentina), Eduardo Polidor (São Paulo, Brazil), and Garland Foster (Green Bay, WI, United States). In July 2003, Tiki was named the SourceForge.net July 2003 Project of the Month. In late 2003, a fork of Tiki was used to create Bitweaver. In 2006, Tiki was named to CMS Report's Top 30 Web Applications. In 2008, Tiki was named to EContent magazine's Top 100 In 2009, Tiki adopted a six-month release cycle and announced the selection of a Long Term Support (LTS) version and the Tiki Software Community Association was formed as the legal steward for Tiki. The Tiki Software Association is a not-for-profit entity established in Canada. Previously, the entire project was run entirely by volunteers. In 2010, Tiki received Best of Open Source Software Applications Award (BOSSIE) from InfoWorld, in the Applications category. In 2011, Tiki was named to CMS Report's Top 30 Web Applications. In 2012, Tiki was named "Best Web Tool" by WebHostingSearch.com, and "People's Choice: Best Free CMS" by CMS Critic. In 2016, Tiki was named as one of the "10 Best Open Source Collaboration Software Tools" by Small Business Computing. == Name == The name TikiWiki is written in CamelCase, a common Wiki syntax indicating a hyperlink within the Wiki. It is most likely a compound word combining two Polynesian terms, Tiki and Wiki, to create a self-rhyming name similar to wikiwiki, a common variant of wiki. A backronym has also been formed for Tiki: Tightly Integrated Knowledge Infrastructure. == Release Information and History == In general, the Tiki Software Community Association releases a new major version of Tiki Wiki every 8 months where prior, non-LTS, major versions are supported until the first minor version release of the next major version (i.e., 16.0 ⇒ 17.1). Starting with version 12.x, Tiki Wiki LTS is supported for 5 years where it enters a security/maintenance release cycle upon the release of the next LTS version. Tiki Wiki's release history is outlined below.

  Read more →
• 

  Closest point method

  The closest point method (CPM) is an embedding method for solving partial differential equations on surfaces. The closest point method uses standard numerical approaches such as finite differences, finite element or spectral methods in order to solve the embedding partial differential equation (PDE) which is equal to the original PDE on the surface. The solution is computed in a band surrounding the surface in order to be computationally efficient. In order to extend the data off the surface, the closest point method uses a closest point representation. This representation extends function values to be constant along directions normal to the surface. == Definitions == Closest Point function: Given a surface S , c p ( x ) {\displaystyle {\mathcal {S}},cp(\mathbf {x} )} refers to a (possibly non-unique) point belonging to S {\displaystyle {\mathcal {S}}} , which is closest to x {\displaystyle \mathbf {x} } [SE]. Closest point extension: Let S {\displaystyle {\mathcal {S}}} , be a smooth surface in R d {\displaystyle \mathbb {R} ^{d}} . The closest point extension of a function u : S → R {\displaystyle u:{\mathcal {S}}\rightarrow \mathbb {R} } , to a neighborhood Ω {\displaystyle \Omega } of S {\displaystyle {\mathcal {S}}} , is the function v : Ω → R {\displaystyle v:\Omega \rightarrow \mathbb {R} } , defined by v ( x ) = u ( c p ( x ) ) {\displaystyle v(\mathbf {x} )=u(cp(\mathbf {x} ))} . == Closest point method == Initialization consists of these steps [EW]: If it is not already given, a closest point representation of the surface is constructed. A computational domain is chosen. Typically this is a band around the surface. Replace surface gradients by standard gradients in R 3 {\displaystyle \mathbb {R} ^{3}} . Solution is initialized by extending the initial surface data on to the computational domain using the closest point function. After initialization, alternate between the following two steps: Using the closest point function, extend the solution off the surface to the computational domain. Compute the solution to the embedding PDE on a Cartesian mesh in the computational domain for one time step. == Banding == The surface PDE is extended into R 3 {\displaystyle \mathbb {R} ^{3}} however it is only necessary to solve this new PDE near the surface. Hence, we solve the PDE in a band surrounding the surface for efficient computational purposes. Ω c x : ‖ x − c p ( x ) ‖ 2 ≤ λ {\displaystyle \Omega _{c}{x:\|x-cp(x)\|_{2}\leq \lambda }} where λ {\displaystyle \lambda } is the bandwidth. == Example: Heat equation on a circle == Using initial profile u S ( θ , t ) = sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\sin(\theta )} leads to the solution u S ( θ , t ) = exp ⁡ ( − t ) sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\exp(-t)\sin(\theta )} for the heat equation. Forward Euler time-stepping is used with relation Δ t = 0.1 Δ x 2 {\displaystyle \Delta t=0.1\Delta x^{2}} and degree-four interpolation polynomials for the interpolations. Second-order centered differences are used for the spatial discretization. The CPM results in the expected second order error in the solution u {\displaystyle u} . == Applications == The closest point method can be applied to various PDEs on surfaces. Reaction–diffusion problems on point clouds [RD], eigenvalue problems [EV], and level set equations [LS] are a few examples.

  Read more →
• 

  Foveated imaging

  Foveated imaging is a digital image processing technique in which the image resolution, or amount of detail, varies across the image according to one or more "fixation points". A fixation point indicates the highest resolution region of the image and corresponds to the center of the eye's retina, the fovea. The location of a fixation point may be specified in many ways. For example, when viewing an image on a computer monitor, one may specify a fixation using a pointing device, like a computer mouse. Eye trackers which precisely measure the eye's position and movement are also commonly used to determine fixation points in perception experiments. When the display is manipulated with the use of an eye tracker, this is known as a gaze contingent display. Fixations may also be determined automatically using computer algorithms. Some common applications of foveated imaging include imaging sensor hardware and image compression. For descriptions of these and other applications, see the list below. Miniaturized foveated imaging systems can be realized by high-resolution 3D printing of multi-lens objectives directly on a CMOS (Complementary metal-oxide-semiconductor) chip. Foveated imaging is also commonly referred to as space variant imaging or gaze contingent imaging. == Applications == === Compression === Contrast sensitivity falls off dramatically as one moves from the center of the retina to the periphery. In lossy image compression, one may take advantage of this fact in order to compactly encode images. If one knows the viewer's approximate point of gaze, one may reduce the amount of information contained in the image as the distance from the point of gaze increases. Because the fall-off in the eye's resolution is dramatic, the potential reduction in display information can be substantial. Also, foveation encoding may be applied to the image before other types of image compression are applied and therefore can result in a multiplicative reduction. === Foveated sensors === Foveated sensors are multiresolution hardware devices that allow image data to be collected with higher resolution concentrated at a fixation point. An advantage to using foveated sensor hardware is that the image collection and encoding can occur much faster than in a system that post-processes a high resolution image in software. === Simulation === Foveated imaging has been used to simulate visual fields with arbitrary spatial resolution. For example, one may present video containing a blurred region representing a scotoma. By using an eye-tracker and holding the blurred region fixed relative to the viewer's gaze, the viewer will have a visual experience similar to that of a person with an actual scotoma. === Video gaming === Foveated rendering is a rendering optimization technique which uses an eye tracker integrated with a virtual reality headset to reduce the rendering workload by greatly reducing the image quality in the peripheral vision (outside of the zone gazed by the fovea).. However, other than the near-eye displays (e.g., virtual reality headset), foveated rendering is also suitable for large high-resolution display walls, desktop monitor, and even for smart phones. Over the time different foveated rendering techniques are proposed, for instance, adaptive resolution, geometric simplification, shading simplification and chromatic degradation, spatio-temporal deterioration . If we consider the variable sample distribution of physically-based rendering under the shader (e.g., hit/miss etc.), then this degradation strategies are applied on overall foveated rendering. At the CES 2016, SensoMotoric Instruments (SMI) demoed a new 250 Hz eye tracking system and a working foveated rendering solution. It resulted from a partnership with camera sensor manufacturer Omnivision who provided the camera hardware for the new system. The Apple Vision Pro mixed reality headset features dynamic foveated rendering provided by its visionOS operating system. === Quality assessment === Foveated imaging may be useful in providing a subjective image quality measure. Traditional image quality measures, such as peak signal-to-noise ratio, are typically performed on fixed resolution images and do not take into account some aspects of the human visual system, like the change in spatial resolution across the retina. A foveated quality index may therefore more accurately determine image quality as perceived by humans. === Image database retrieval === In databases that contain very high resolution images, such as a satellite image database, it may be desirable to interactively retrieve images in order to reduce retrieval time. Foveated imaging allows one to scan low resolution images and retrieve only high resolution portions as they are needed. This is sometimes called progressive transmission. == Example images ==

  Read more →
• 

  Shopify

  Shopify Inc., stylized as shopify, is a Canadian multinational e-commerce company headquartered in Ottawa, Ontario that operates a platform for retail point-of-sale systems. The company has over 5 million customers and processed US$292.3 billion in transactions in 2024, of which 57% was in the United States. Major customers include Tesla, LVMH, Nestlé, PepsiCo, AB InBev, Kraft Heinz, Lindt, Whole Foods Market, Red Bull, and Hyatt. The company's software has been praised for its ease of use and reasonable fee structure. It has been described as the "go-to e-commerce platform for startups". However, the company has faced criticism for allegedly inflating their sales data and for associating with controversial sellers. == History == === 2006: Founding === Shopify was founded in 2006 by friends Tobias Lütke, Daniel Weinand and Scott Lake after launching Snowdevil, an online store for snowboarding equipment, in 2004. Dissatisfied with the existing e-commerce products on the market, Lütke, a computer programmer by trade, instead built his own. Lütke used the open source web application framework Ruby on Rails to build Snowdevil's online store and launched it after two months of development. The Snowdevil founders launched the platform as Shopify in June 2006. Shopify created an open-source template language called Liquid, which is written in Ruby and has been used since 2006. In June 2009, Shopify launched an application programming interface (API) platform and App Store. The API allows developers to create applications for Shopify online stores and then sell them on the Shopify App Store. === 2010s === In January 2010, Shopify started its Build-A-Business competition, in which participants create a business using its commerce platform. The winners of the competition received cash prizes and mentorship from entrepreneurs, such as Richard Branson, Eric Ries and others. In April of that year, Shopify launched a free mobile app on the Apple App Store. The app allows Shopify store owners to view and manage their stores from iOS mobile devices. In December 2010, Shopify raised $7 million from a series A round from Bessemer Venture Partners, FirstMark Capital, and Felicis Ventures at a $20 million pre-money valuation. At that time, the company had annualized transaction value of $132 million. In October 2011, it raised $15 million in a Series B round. In August 2013, Shopify launched Shopify Payments in partnership with Stripe. Shopify Payments allows merchants to accept payments without requiring a third-party payment gateway. The company also announced the launch of a point of sale system to enable in-person sales in addition to online. The company received $100 million in Series C funding in December 2013. Shopify earned $105 million in revenue in 2014, twice as much as it raised the previous year. In February 2014, Shopify released "Shopify Plus" for large e-commerce businesses seeking access to additional features and support. Shopify went public via an initial public offering on May 21, 2015 raising more than $131 million. In September 2015, Amazon.com closed its Amazon Webstore service for merchants and selected Shopify as the preferred migration provider; In April 2016, Shopify announced Shopify Capital, a cash advance product. Shopify Capital was initially piloted to merchants within the US and allowed merchants to receive an advance on future earnings processed through its payment gateway. Since its launch in 2016, Shopify Capital has provided more than $5.1 billion in funding to Shopify merchants, with a maximum advance of $2 million. On June 7, 2016, Shopify launched its Shopify Plus Partners Program, to help agencies connect with evolving businesses in ecommerce space. On October 3, 2016, Shopify acquired Boltmade. In November 2016, Shopify partnered with Paystack which allowed Nigerian online retailers to accept payments from customers around the world. On November 22, 2016, Shopify launched Frenzy, a mobile app that improves flash sales. In January 2017, Shopify announced integration with Amazon that would allow merchants to sell on Amazon from their Shopify stores. In April 2017, Shopify introduced its Chip & Swipe Reader, a Bluetooth enabled debit and credit card reader for brick and mortar retail purchases. The company has since released additional technology for brick and mortar retailers, including a point-of-sale system with a Dock and Retail Stand similar to that offered by Square, and a tappable chip card reader. Shopify announced a one-click accelerated checkout feature called Shopify Pay in April 2017 as an exclusive feature for merchants using Shopify Payments as their payment processor. Customers can save their shipping and payment information for future purchases from all participating Shopify stores. In November 2017 Shopify announced Arrive, a mobile application to help customers track packages from both Shopify merchants and other e-commerce websites. In September 2018, Shopify announced plans to expand its office space in Toronto's King West neighborhood in 2022 as part of "The Well" complex, jointly owned by Allied Properties REIT and RioCan REIT. In October 2018, Shopify opened its first flagship, a physical space for business owners in Los Angeles. The space offered educational classes, coworking space, a "genius bar" for companies that use Shopify software, and workshops. Online cannabis sales in Ontario, Canada, used Shopify's software when the drug was legalized in October 2018. Shopify's software is also used for in-person cannabis sales in Ontario since becoming legal in 2019. In January 2019, Shopify announced the launch of Shopify Studios, a full-service television and film content and production house. On March 22, 2019, Shopify and email marketing platform Mailchimp ended an integration agreement over disputes involving customer privacy and data collection. In April 2019, Shopify announced an integration with Snapchat to allow Shopify merchants to buy and manage Snapchat Story ads directly on the Shopify platform. The company had previously secured similar integration partnerships with Facebook and Google. On August 14, 2019, Shopify launched Shopify Chat, a new native chat function that allows merchants to have real-time conversations with customers visiting Shopify stores online. === 2020s === In January 2020, the company announced plans to hire in Vancouver, Canada. Additionally, the effects of the COVID-19 pandemic contributed to lifting stock prices. On February 21, 2020, Shopify announced plans to join the Diem Association, known as Libra Association at the time. Also that month, Shopify Pay was rebranded as Shop Pay. In April, Arrive was rebranded as Shop, combining both customer-facing features under a single brand. In May, during the COVID-19 pandemic, Shopify announced it would shift most of its global workforce to permanent remote work. It was reported that Shopify's valuation would likely rise on the back of options it had in the company Affirm that was expecting to go public shortly. In November 2020, Shopify announced a partnership with Alipay to support merchants with cross-border payments. Shopify also provided the opportunity for users to connect Alibaba and AliExpress to Shopify through a Alibaba Dropshipping app that could be purchased through the Shopify App Store. Multiple applications launched between 2021 and 2024 allowed customers to connect their Shopify store to their Alibaba account and then import and publish your products. The integration automatically syncs inventory and orders between both platforms so that Alibaba vendors can ship directly to dropshipping customers.As a result of Affirm's January 13, 2021 IPO, Shopify's 8% stake in Affirm was worth $2 billion. About half of Shopify's C-level executives left the company in early 2021. On June 29, 2021, Shopify removed the 20% revenue share for app developers that make less than US$1 million per year. On January 18, 2022, Shopify announced a partnership with JD.com to let U.S. merchants expand their operations in China, listing their products on JD's cross-border e-commerce platform JD Worldwide. On March 22, 2022, Shopify introduced Linkpop, a product to create a branded, social marketplace through which merchants can advertise and market their products via links to be added on social media channels. The following month, Shopify, Alphabet Inc., Meta Platforms, McKinsey & Company, and Stripe, Inc. announced a $925 million advance market commitment of carbon dioxide removal (CDR) from companies that are developing CDR technology over the next 9 years. In June 2022, Shopify partnered with Twitter. As a part of the deal, Twitter announced that it would launch a sales channel app for all of Shopify's U.S. merchants through its app store. Shopify also partnered with PayPal to offer Shopify Payments to merchants in France. On July 26, 2022, Lütke announced immediate layoffs totalling roughly 10 percent of its workforce. In

  Read more →
• 

  Inductive bias

  The inductive bias (also known as learning bias) of a learning algorithm is the set of assumptions that the learner uses to predict outputs of given inputs that it has not encountered. Inductive bias is anything which makes the algorithm learn one pattern instead of another pattern (e.g., step-functions in decision trees instead of continuous functions in linear regression models). Learning involves searching a space of solutions for a solution that provides a good explanation of the data. However, in many cases, there may be multiple equally appropriate solutions. An inductive bias allows a learning algorithm to prioritize one solution (or interpretation) over another, independently of the observed data. In machine learning, the aim is to construct algorithms that are able to learn to predict a certain target output. To achieve this, the learning algorithm is presented some training examples that demonstrate the intended relation of input and output values. Then the learner is supposed to approximate the correct output, even for examples that have not been shown during training. Without any additional assumptions, this problem cannot be solved since unseen situations might have an arbitrary output value. The kind of necessary assumptions about the nature of the target function are subsumed in the phrase inductive bias. A classical example of an inductive bias is Occam's razor, assuming that the simplest consistent hypothesis about the target function is actually the best. Here, consistent means that the hypothesis of the learner yields correct outputs for all of the examples that have been given to the algorithm. Approaches to a more formal definition of inductive bias are based on mathematical logic. Here, the inductive bias is a logical formula that, together with the training data, logically entails the hypothesis generated by the learner. However, this strict formalism fails in many practical cases in which the inductive bias can only be given as a rough description (e.g., in the case of artificial neural networks), or not at all. == Types == The following is a list of common inductive biases in machine learning algorithms. Maximum conditional independence: if the hypothesis can be cast in a Bayesian framework, try to maximize conditional independence. This is the bias used in the Naive Bayes classifier. Minimum cross-validation error: when trying to choose among hypotheses, select the hypothesis with the lowest cross-validation error. Although cross-validation may seem to be free of bias, the "no free lunch" theorems show that cross-validation must be biased, for example assuming that there is no information encoded in the ordering of the data. Maximum margin: when drawing a boundary between two classes, attempt to maximize the width of the boundary. This is the bias used in support vector machines. The assumption is that distinct classes tend to be separated by wide boundaries. Minimum description length: when forming a hypothesis, attempt to minimize the length of the description of the hypothesis. Minimum features: unless there is good evidence that a feature is useful, it should be deleted. This is the assumption behind feature selection algorithms. Nearest neighbors: assume that most of the cases in a small neighborhood in feature space belong to the same class. Given a case for which the class is unknown, guess that it belongs to the same class as the majority in its immediate neighborhood. This is the bias used in the k-nearest neighbors algorithm. The assumption is that cases that are near each other tend to belong to the same class. == Shift of bias == Although most learning algorithms have a static bias, some algorithms are designed to shift their bias as they acquire more data. This does not avoid bias, since the bias shifting process itself must have a bias.

  Read more →
• 

  TAPPS2

  TAPPS2 (Technische Alternative Planungs- und Programmier-System) is a tool used for developing the program logic for the universal, heating and solar thermal controllers by Austrian manufacturer Technische Alternative. Its primary usecase is defining the exact reaction of the controller to a certain event. Other than its predecessor, TAPPS, which could only be used to program controllers of type UVR1611, TAPPS2 is mainly used to program the UVR16x2 and RSM610 controllers, as well as several extension modules. == Development == Development in TAPPS2 is done on a vector-based drawing surface using components that can be placed via drag and drop. The components, which can be separated into inputs, functions and outputs are then being connected according to their individual features. Available components vary according to the current solar thermal control unit.

  Read more →
• 

  Geo-replication

  Geo-replication systems are designed to provide improved availability and disaster tolerance by using geographically distributed data centers. This is intended to improve the response time for applications such as web portals. Geo-replication can be achieved using software, hardware or a combination of the two. == Software == Geo-replication software is a network performance-enhancing technology that is designed to provide improved access to portal or intranet content for users at the most remote parts of large organizations. It is based on the principle of storing complete replicas of portal content on local servers, and then keeping the content on those servers up-to-date using heavily compressed data updates. === Portal acceleration === Geo-replication technologies are used to provide replication of the content of portals, intranets, web applications, content and data between servers, across wide area networks WAN to allow users at remote sites to access central content at LAN speeds. Geo-replication software can improve the performance of data networks that suffer limited bandwidth, latency and periodic disconnection. Terabytes of data can be replicated over a wide area network, giving remote sites faster access to web applications. Geo-replication software uses a combination of data compression and content caching technologies. differencing technologies can also be employed to reduce the volume of data that has to be transmitted to keep portal content accurate across all servers. This update compression can reduce the load that portal traffic places on networks, and improve the response time of a portal. === Portal replication === Remote users of web portals and collaboration environments will frequently experience network bandwidth and latency problems which will slow down their experience of opening and closing files, and otherwise interacting with the portal. Geo-replication technology is deployed to accelerate the remote end user portal performance to be equivalent to that experienced by users locally accessing the portal in the central office. === Differencing engine technologies === To deliver this reduction in the size of the required data updates across a portal, geo-replication systems often use differencing engine technologies. These systems are able to difference the content of each portal server right down to the byte level. This knowledge of the content that is already on each server enables the system to rebuild any changes to the content on one server, across each of the other servers in the deployment from content already hosted on those other servers. This type of differencing system ensures that no content, at the byte level, is ever sent to a server twice. === Offline portal replication on laptops === Geo-replication systems are often extended to deliver local replication beyond the server and down to the laptop used by a single user. Server to laptop replication enables mobile users to have access to a local replica of their business portal on a standard laptop. This technology may be employed to provide in the field access to portal content by, for example, sales forces and combat forces. == Geo-replication systems ==

  Read more →
• 

  Research software engineering

  Research software engineering is the application of software engineering practices, methods and techniques for research software, i.e. software that was made for and is mainly used within research projects. As usual for software engineering, this also includes knowledge of other (and in this case varying) research fields as well as open science that need to be incorporated into a software development process. The term was proposed in a research paper in 2010 in response to an empirical survey on tools used for software development in research projects. It started to be used in United Kingdom in 2012, when it was needed to define the type of software development needed in research. This focuses on reproducibility, reusability, and accuracy of data analysis and applications created for research. == Support == Various type of associations and organisations have been created around this role to support the creation of posts in universities and research institutes. In 2014 a Research Software Engineer Association was created in UK, which attracted 160 members in the first three months and which lead to the creation of the Society of Research Software Engineering in 2019. Other countries like the Netherlands, Germany, and the USA followed creating similar communities and there are similar efforts being pursued in Asia, Australia, Canada, New Zealand, the Nordic countries, and Belgium. In January 2021 the International Council of RSE Associations was introduced. UK counts over 40 universities and institutes with groups that provide access to software expertise to different areas of research. Additionally, the Engineering and Physical Sciences Research Council created a Research Software Engineer fellowship to promote this role and help the creation of RSE groups across UK, with calls in 2015, 2017, and 2020. The world first RSE conference took place in UK in September 2016 and it has been repeated annually (except for a gap in 2020) since. In 2019 the first national RSE conferences in Germany and the Netherlands were held, next editions were planned for 2020 and then cancelled. US-RSE held its first national conference in 2023. The Research Software Alliance was formed in 2019 to advance the global research software ecosystem by collaborating with decision makers and key influencers. The SORSE (A Series of Online Research Software Events) community was established in late‑2020 in response to the COVID-19 pandemic and ran its first online event in September 2020.

  Read more →
• 

  Bayesian programming

  Bayesian programming is a formalism and a methodology for having a technique to specify probabilistic models and solve problems when less than the necessary information is available. Edwin T. Jaynes proposed that probability could be considered as an alternative and an extension of logic for rational reasoning with incomplete and uncertain information. In his founding book Probability Theory: The Logic of Science he developed this theory and proposed what he called "the robot," which was not a physical device, but an inference engine to automate probabilistic reasoning—a kind of Prolog for probability instead of logic. Bayesian programming is a formal and concrete implementation of this "robot". Bayesian programming may also be seen as an algebraic formalism to specify graphical models such as, for instance, Bayesian networks, dynamic Bayesian networks, Kalman filters or hidden Markov models. Indeed, Bayesian programming is more general than Bayesian networks and has a power of expression equivalent to probabilistic factor graphs. == Formalism == A Bayesian program is a means of specifying a family of probability distributions. The constituent elements of a Bayesian program are presented below: Program { Description { Specification ( π ) { Variables Decomposition Forms Identification (based on δ ) Question {\displaystyle {\text{Program}}{\begin{cases}{\text{Description}}{\begin{cases}{\text{Specification}}(\pi ){\begin{cases}{\text{Variables}}\\{\text{Decomposition}}\\{\text{Forms}}\\\end{cases}}\\{\text{Identification (based on }}\delta )\end{cases}}\\{\text{Question}}\end{cases}}} A program is constructed from a description and a question. A description is constructed using some specification ( π {\displaystyle \pi } ) as given by the programmer and an identification or learning process for the parameters not completely specified by the specification, using a data set ( δ {\displaystyle \delta } ). A specification is constructed from a set of pertinent variables, a decomposition and a set of forms. Forms are either parametric forms or questions to other Bayesian programs. A question specifies which probability distribution has to be computed. === Description === The purpose of a description is to specify an effective method of computing a joint probability distribution on a set of variables { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} given a set of experimental data δ {\displaystyle \delta } and some specification π {\displaystyle \pi } . This joint distribution is denoted as: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} . To specify preliminary knowledge π {\displaystyle \pi } , the programmer must undertake the following: Define the set of relevant variables { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} on which the joint distribution is defined. Decompose the joint distribution (break it into relevant independent or conditional probabilities). Define the forms of each of the distributions (e.g., for each variable, one of the list of probability distributions). ==== Decomposition ==== Given a partition of { X 1 , X 2 , … , X N } {\displaystyle \left\{X_{1},X_{2},\ldots ,X_{N}\right\}} containing K {\displaystyle K} subsets, K {\displaystyle K} variables are defined L 1 , ⋯ , L K {\displaystyle L_{1},\cdots ,L_{K}} , each corresponding to one of these subsets. Each variable L k {\displaystyle L_{k}} is obtained as the conjunction of the variables { X k 1 , X k 2 , ⋯ } {\displaystyle \left\{X_{k_{1}},X_{k_{2}},\cdots \right\}} belonging to the k t h {\displaystyle k^{th}} subset. Recursive application of Bayes' theorem leads to: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) = P ( L 1 ∧ ⋯ ∧ L K ∣ δ ∧ π ) = P ( L 1 ∣ δ ∧ π ) × P ( L 2 ∣ L 1 ∧ δ ∧ π ) × ⋯ × P ( L K ∣ L K − 1 ∧ ⋯ ∧ L 1 ∧ δ ∧ π ) {\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\wedge \cdots \wedge L_{K}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid L_{1}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid L_{K-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)\end{aligned}}} Conditional independence hypotheses then allow further simplifications. A conditional independence hypothesis for variable L k {\displaystyle L_{k}} is defined by choosing some variable X n {\displaystyle X_{n}} among the variables appearing in the conjunction L k − 1 ∧ ⋯ ∧ L 2 ∧ L 1 {\displaystyle L_{k-1}\wedge \cdots \wedge L_{2}\wedge L_{1}} , labelling R k {\displaystyle R_{k}} as the conjunction of these chosen variables and setting: P ( L k ∣ L k − 1 ∧ ⋯ ∧ L 1 ∧ δ ∧ π ) = P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid L_{k-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)=P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} We then obtain: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) = P ( L 1 ∣ δ ∧ π ) × P ( L 2 ∣ R 2 ∧ δ ∧ π ) × ⋯ × P ( L K ∣ R K ∧ δ ∧ π ) {\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid R_{2}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid R_{K}\wedge \delta \wedge \pi \right)\end{aligned}}} Such a simplification of the joint distribution as a product of simpler distributions is called a decomposition, derived using the chain rule. This ensures that each variable appears at the most once on the left of a conditioning bar, which is the necessary and sufficient condition to write mathematically valid decompositions. ==== Forms ==== Each distribution P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} appearing in the product is then associated with either a parametric form (i.e., a function f μ ( L k ) {\displaystyle f_{\mu }\left(L_{k}\right)} ) or a question to another Bayesian program P ( L k ∣ R k ∧ δ ∧ π ) = P ( L ∣ R ∧ δ ^ ∧ π ^ ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)=P\left(L\mid R\wedge {\widehat {\delta }}\wedge {\widehat {\pi }}\right)} . When it is a form f μ ( L k ) {\displaystyle f_{\mu }\left(L_{k}\right)} , in general, μ {\displaystyle \mu } is a vector of parameters that may depend on R k {\displaystyle R_{k}} or δ {\displaystyle \delta } or both. Learning takes place when some of these parameters are computed using the data set δ {\displaystyle \delta } . An important feature of Bayesian programming is this capacity to use questions to other Bayesian programs as components of the definition of a new Bayesian program. P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} is obtained by some inferences done by another Bayesian program defined by the specifications π ^ {\displaystyle {\widehat {\pi }}} and the data δ ^ {\displaystyle {\widehat {\delta }}} . This is similar to calling a subroutine in classical programming and provides an easy way to build hierarchical models. === Question === Given a description (i.e., P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} ), a question is obtained by partitioning { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} into three sets: the searched variables, the known variables and the free variables. The 3 variables S e a r c h e d {\displaystyle Searched} , K n o w n {\displaystyle Known} and F r e e {\displaystyle Free} are defined as the conjunction of the variables belonging to these sets. A question is defined as the set of distributions: P ( S e a r c h e d ∣ Known ∧ δ ∧ π ) {\displaystyle P\left(Searched\mid {\text{Known}}\wedge \delta \wedge \pi \right)} made of many "instantiated questions" as the cardinal of K n o w n {\displaystyle Known} , each instantiated question being the distribution: P ( Searched ∣ Known ∧ δ ∧ π ) {\displaystyle P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)} === Inference === Given the joint distribution P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} , it is always possible to compute any possible question using the following general inference: P ( Searched ∣ Known ∧ δ ∧ π ) = ∑ Free [ P ( Searched ∧ Free ∣ Known ∧ δ ∧ π ) ] = ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] P ( Known ∣ δ ∧ π ) = ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] ∑ Free ∧ Searched [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] = 1 Z × ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] {\displaystyle {\begin{aligned}&P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)\\={}&\sum _{\text{Free}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\mid {\text{Known}}\wedge \delta \wedge \

  Read more →
• 

  Carrenza

  Carrenza was a cloud-computing company based in London, United Kingdom. The company was acquired by Six Degrees Technology Group in 2016. == Operations == Carrenza was a UK-based IT company that provides Cloud computing technologies. It offered a range of public cloud, private cloud and hybrid cloud services, including Infrastructure as a Service (IaaS), Platform as a Service (PaaS), enterprise application integration and system integration. Carrenza partnered with several enterprise IT providers and was an accredited VMware Enterprise Service Partner and HP (Hewlett-Packard) Cloud Agile Partner. The company was based on Commercial Street, in the heart of the East London Tech City district, which is host to a large number of technology companies. == History == Carrenza was formed in 2001 as a consultancy by chief executive and founder Dan Sutherland. It began trading in 2004 and launched its first enterprise cloud computing platform in 2006, becoming one of the first companies in Europe to provide this type of hosting service. In 2009, it formed a partnership with Comic Relief and its affiliated campaigns Red Nose Day Sport Relief to provide IT infrastructure services to the charity, an arrangement that has won industry recognition. In 2013 it launched its first overseas services, with a mainland Europe cloud node based in Amsterdam. == Partnerships and customers == Carrenza had formed partnerships with a range of IT providers. It was one of the first companies in Europe to become a HP Cloud Agile partner., using HP blade servers and HP 3PAR SAN technology to power its cloud computing services. The company's products also use VMware vCloud IaaS tools and it is taking part in the VMware lighthouse initiative helping develop the next generation of VMware products and services. Other technology companies that Carrenza has worked closely with include Cisco, for enterprise security and loadblancing services, and Oracle. The company was the first to deploy Oracle Database 11g stretched RAC in production. It has also won two Oracle partner awards, including a Special Recognition award for its work with Comic Relief. The company has also been recognised by the UK IT Industry, receiving awards in 2009 for Community Project of the Year and in 2010 for best small business project for its Monopoly City Streets Work. Other companies that have partnered with Carrenza for their cloud-based IT services include Age UK, Haymarket Media Group, the World Wide Fund for Nature, Royal Bank of Scotland, eBay and Cineworld. == Accreditations == Carrenza's services are accredited for their compliance with several key international IT security and quality standards. These include: ISO27001:2005, Information Security Management System for all Carrenza services. UK Government G-Cloud, Carrenza has been awarded a place on the UK government's G-Cloud iii framework as an Infrastructure as a Service provider.

  Read more →
• 

  System context diagram

  A system context diagram in engineering is a diagram that defines the boundary between the system, or part of a system, and its environment, showing the entities that interact with it. This diagram is a high level view of a system. It is similar to a block diagram. == Overview == System context diagrams show a system, as a whole and its inputs and outputs from/to external factors. According to Kossiakoff and Sweet (2011): System Context Diagrams ... represent all external entities that may interact with a system ... Such a diagram pictures the system at the center, with no details of its interior structure, surrounded by all its interacting systems, environments and activities. The objective of the system context diagram is to focus attention on external factors and events that should be considered in developing a complete set of systems requirements and constraints. System context diagrams are used early in a project to get agreement on the scope under investigation. Context diagrams are typically included in a requirements document. These diagrams must be read by all project stakeholders and thus should be written in plain language, so the stakeholders can understand items within the document. == Building blocks == Context diagrams can be developed with the use of two types of building blocks: Entities (Actors): labeled boxes; one in the center representing the system, and around it multiple boxes for each external actor Relationships: labeled lines between the entities and system For example, "customer places order." Context diagrams can also use many different drawing types to represent external entities. They can use ovals, stick figures, pictures, clip art or any other representation to convey meaning. Decision trees and data storage are represented in system flow diagrams. A context diagram can also list the classifications of the external entities as one of a set of simple categories (Examples:), which add clarity to the level of involvement of the entity with regards to the system. These categories include: Active: Dynamic to achieve some goal or purpose (Examples: "Article readers" or "customers"). Passive: Static external entities which infrequently interact with the system (Examples: "Article editors" or "database administrator"). Cooperative: Predictable external entities which are used by the system to bring about some desired outcome (Examples: "Internet service providers" or "shipping companies"). Autonomous (Independent): External entities which are separated from the system, but affect the system indirectly, by means of imposed constraints or similar influences (Examples: "regulatory committees" or "standards groups"). == Alternatives == The best system context diagrams are used to display how a system interoperates at a very high level, or how systems operate and interact logically. The system context diagram is a necessary tool in developing a baseline interaction between systems and actors; actors and a system or systems and systems. Alternatives to the system context diagram are: Architecture Interconnect Diagram: The figure gives an example of an Architecture Interconnect Diagram: A representation of the Albuquerque regional ITS architecture interconnects for the Albuquerque Police Department that was generated using the Turbo Architecture tool is shown in the figure. Each block represents an ITS inventory element, including the name of the stakeholder in the top shaded portion. The interconnect lines between elements are solid or dashed, indicating existing or planned connections. Business Model Canvas, a strategic management template for developing new or documenting existing business models. It is a visual chart with elements describing a firm's value proposition, infrastructure, customers, and finances.[1] It assists firms in aligning their activities by illustrating potential trade-offs. Enterprise data model: this type of data model according to Simsion (2005) can contain up to 50 to 200 entity classes, which results from specific "high level of generalization in data modeling". IDEF0 Top Level Context Diagram: The IDEF0 process starts with the identification of the prime function to be decomposed. This function is identified on a "Top Level Context Diagram" that defines the scope of the particular IDEF0 analysis. Problem Diagrams (Problem Frames): In addition to the kinds of things shown on a context diagram, a problem diagram shows requirements and requirements references. Use case diagram: One of the Unified Modeling Language diagrams. They also represent the scope of the project at a similar level of abstraction. - Use Cases, however, tend to focus more on the goals of 'actors' who interact with the system, and do not specify any solution. Use Case diagrams represent a set of Use Cases, which are textual descriptions of how an actor achieves the goal of a use case. for Example Customer Places Order. ArchiMate: ArchiMate is an open and independent enterprise architecture modeling language to support the description, analysis and visualization of architecture within and across business domains in an unambiguous way. Most of these diagrams work well as long as a limited number of interconnects will be shown. Where twenty or more interconnects must be displayed, the diagrams become quite complex and can be difficult to read.

  Read more →