AI Generator Outfit

AI Generator Outfit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  BigDog

  BigDog is a dynamically stable quadruped military robot platform that was created in 2005 by Boston Dynamics with the Harvard University Concord Field Station. It was funded by the U.S. Defense Advanced Research Projects Agency (DARPA), but the project was shelved after the BigDog's gas engine was deemed too loud for combat. == History == BigDog was funded by the Defense Advanced Research Projects Agency (DARPA) in the hopes that it would be able to serve as a mechanic pack mule to accompany soldiers in terrain too rough for conventional vehicles. Instead of wheels or treads, BigDog uses four legs for movement, allowing it to move across surfaces that would be difficult for wheels. The legs contain a variety of sensors, including joint position and ground contact. BigDog also features a laser gyroscope and a stereo vision system. BigDog is 3 feet (0.91 m) long, stands 2.5 feet (0.76 m) tall, and weighs 240 pounds (110 kg), making it about the size of a small mule. It is capable of traversing difficult terrain, running at four miles per hour (6.4 km/h), carrying 340 pounds (150 kg), and climbing a 35 degree incline. Locomotion is controlled by an onboard computer that receives input from the robot's various sensors. Navigation and balance are also managed by the control system. BigDog's walking pattern is controlled through four legs, each equipped with four low-friction hydraulic cylinder actuators that power the joints. BigDog's locomotion behaviors can vary greatly. It can stand up, sit down, walk with a crawling gait that lifts one leg at a time, walk with a trotting gait lifting diagonal legs, or trot with a running gait. The travel speed of BigDog varies from a 0.62 mph (1 km/h) crawl to a 3.3 mph (5.3 km/h) trot. The BigDog project was headed by Dr. Martin Buehler, who received the Joseph Engelberger Award from the Robotics Industries Association in 2012 for the work. Dr. Buehler while previously a professor at McGill University, headed the robotics lab there, developing four-legged walking and running robots. Built onto the actuators are sensors for joint position and force, and movement is ultimately controlled through an onboard computer which manages the sensors. Approximately 50 sensors are located on BigDog. These measure the attitude and acceleration of the body, motion, and force of joint actuators as well as engine speed, temperature and hydraulic pressure inside the robot's internal engine. Low-level control, such as position and force of the joints, and high-level control such as velocity and altitude during locomotion, are both controlled through the onboard computer. BigDog was featured in episodes of Web Junk 20 and Hungry Beast, and in articles in New Scientist, Popular Science, Popular Mechanics, and The Wall Street Journal. In September 2011 Boston Dynamics released video footage of a new generation of BigDog known as AlphaDog. The footage shows AlphaDog's ability to walk on rough terrain and recover its balance when kicked from the side. The refined equivalent has been designed by Boston Dynamics to exceed the BigDog in terms of capabilities and use to dismounted soldiers. In February 2012, with further DARPA support, the militarized Legged Squad Support System (LS3) variant of BigDog demonstrated its capabilities during a hike over a rough terrain. Starting in the summer of 2012, DARPA planned to complete the overall development of the system and refine its key capabilities in 18 months, ensuring its worth to dismounted warfighters before it is rolled out to squads operating in-theatre. BigDog must be able to demonstrate its ability to complete a 20-mile (32 km) trail in 24 hours, without refuelling, while carrying a 325-pound (150 kg) load. A refinement of its vision sensors will also be conducted. At the end of February 2013, Boston Dynamics released video footage of a modified BigDog with an arm. The arm could pick up objects and throw them. The robot is relying on its legs and torso to help power the motions of the arm. It is believed that it can lift weights around 55 pounds (25 kg). This work was funded by the United States Army Research Laboratory and paved the way for integrating manipulators with quadrupeds as found on Spot, the spiritual successor of BigDog. === Discontinuation === At the end of December 2013, the BigDog project was discontinued. Despite hopes that it would one day work like a pack mule for US soldiers in the field, the gasoline-powered engine was deemed too noisy for use in combat, and it could be heard from hundreds of meters away. A similar project for an all-electric robot named Spot in 2016 was much quieter, but could only carry 45 pounds (20 kg). Both projects are no longer in progress, but the Spot was only released in 2020. == Hardware == BigDog is powered by a small two-stroke, one-cylinder, 15-brake-horsepower (11 kW) engine operating at 9,000 RPM. The engine drives a hydraulic pump, which in turn drives the hydraulic leg actuators. Each leg has four actuators (two for the hip joint, and two each for the knee and ankle joints), for a total of 16. Each actuator unit consists of a hydraulic cylinder, servo valve, position sensor, and force sensor. Onboard computing power is a ruggedized PC/104 board stack with two computers, one running a Pentium M processor running QNX (used for sensor data processing) and another running a Core Duo processor (used for visual data processing). == Gallery ==

  Read more →
• 

  Stewart Nelson

  Stewart Nelson is an American mathematician and programmer from The Bronx who co-founded Systems Concepts. == Biography == From a young age, Nelson was tinkering with electronics, aided and abetted by his father who was a physicist that had become an engineer. Stewart attended Poughkeepsie High School, graduating in the spring of 1963. From his first few days of High School, Stewart displayed his talents for hacking the international telephone trunk lines, along with an uncanny skill for picking combination locks, although this was always done as innocent entertainment. He simply loved the challenge of seeing how quickly he could accomplish this feat. His quirky sense of humor was always visible, as was his disdain for any rule that got in the way of his gaining knowledge. Stewart was an inspiration to the school's Tech-elec Club, as well as a ringleader in the founding of the school's pirate radio station. Nelson enrolled at MIT in 1963 and quickly became known for hooking up the AI Lab's PDP-1 (and later the PDP-6) to the telephone network, making him one of the first phreakers. Nelson later accomplished other feats like hard-wiring additional instructions into the PDP-1. Nelson was hired by Ed Fredkin's Information International Inc. at the urging of Marvin Minsky to work on PDP-7 programs at the MIT Computer Science and Artificial Intelligence Laboratory. Nelson was known as a brilliant software programmer. He was influential in LISP, the assembly instructions for the Digital Equipment Corporation PDP, and a number of other systems. The group of young hackers was known for working on systems after hours. One night, Nelson and others decided to rewire MIT's PDP-1 as a prank. Later, Margaret Hamilton tried to use the DEC-supplied DECAL assembler on the machine and it crashed repeatedly.

  Read more →
• 

  Partial-order planning

  Partial-order planning is an approach to automated planning that maintains a partial ordering between actions and only commits ordering between actions when forced to, that is, ordering of actions is partial. Also this planning doesn't specify which action will come out first when two actions are processed. By contrast, total-order planning maintains a total ordering between all actions at every stage of planning. Given a problem in which some sequence of actions is needed to achieve a goal, a partial-order plan specifies all actions that must be taken, but specifies an ordering between actions only where needed. Consider the following situation: a person must travel from the start to the end of an obstacle course. The course is composed of a bridge, a see-saw, and a swing-set. The bridge must be traversed before the see-saw and swing-set are reachable. Once reachable, the see-saw and swing-set can be traversed in any order, after which the end is reachable. In a partial-order plan, ordering between these obstacles is specified only when needed. The bridge must be traversed first. Second, either the see-saw or swing-set can be traversed. Third, the remaining obstacle can be traversed. Then the end can be traversed. Partial-order planning relies upon the principle of least commitment for its efficiency. == Partial-order plan == A partial-order plan or partial plan is a plan which specifies all actions that must be taken, but only specifies the order between actions when needed. It is the result of a partial-order planner. A partial-order plan consists of four components: A set of actions (also known as operators). A partial order for the actions. It specifies the conditions about the order of some actions. A set of causal links. It specifies which actions meet which preconditions of other actions. Alternatively, a set of bindings between the variables in actions. A set of open preconditions. It specifies which preconditions are not fulfilled by any action in the partial-order plan. To keep the possible orders of the actions as open as possible, the set of order conditions and causal links must be as small as possible. A plan is a solution if the set of open preconditions is empty. A linearization of a partial order plan is a total order plan derived from the particular partial order plan; in other words, both order plans consist of the same actions, with the order in the linearization being a linear extension of the partial order in the original partial order plan. === Example === For example, a plan for baking a cake might start: go to the store get eggs; get flour; get milk pay for all goods go to the kitchen This is a partial plan because the order for finding eggs, flour and milk is not specified, the agent can wander around the store reactively accumulating all the items on its shopping list until the list is complete. == Partial-order planner == A partial-order planner is an algorithm or program which will construct a partial-order plan and search for a solution. The input is the problem description, consisting of descriptions of the initial state, the goal and possible actions. The problem can be interpreted as a search problem where the set of possible partial-order plans is the search space. The initial state would be the plan with the open preconditions equal to the goal conditions. The final state would be any plan with no open preconditions, i.e. a solution. The initial state is the starting conditions, and can be thought of as the preconditions to the task at hand. For a task of setting the table, the initial state could be a clear table. The goal is simply the final action that needs to be accomplished, for example setting the table. The operators of the algorithm are the actions by which the task is accomplished. For this example there may be two operators: lay (tablecloth), and place (glasses, plates, and silverware). === Plan space === The plan space of the algorithm is constrained between its start and finish. The algorithm starts, producing the initial state and finishes when all parts of the goal have been achieved. In the setting a table example, two types of actions exist that must be addressed: the put-out and lay operators. Four unsolved operators also exist: Action 1, lay-tablecloth, Action 2, Put-out (plates), Action 3, Put-out (silverware), and Action 4, Put-out (glasses). However, a threat arises if Action 2, 3, or 4 comes before Action 1. This threat is that the precondition to the start of the algorithm will be unsatisfied as the table will no longer be clear. Thus, constraints exist that must be added to the algorithm that force Actions 2, 3, and 4 to come after Action 1. Once these steps are completed, the algorithm will finish and the goal will have been completed. === Threats === As seen in the algorithm presented above, partial-order planning can encounter certain threats, meaning orderings that threaten to break connected actions, thus potentially destroying the entire plan. There are two ways to resolve threats: Promotion Demotion Promotion orders the possible threat after the connection it threatens. Demotion orders the possible threat before the connection it threatens. Partial-order planning algorithms are known for being both sound and complete, with sound being defined as the total ordering of the algorithm, and complete being defined as the capability to find a solution, given that a solution does in fact exist. == Partial-order vs. total-order planning == Partial-order planning is the opposite of total-order planning, in which actions are sequenced all at once and for the entirety of the task at hand. The question arises when one has two competing processes, which one is better? Anthony Barret and Daniel Weld have argued in their 1993 book, that partial-order planning is superior to total-order planning, as it is faster and thus more efficient. They tested this theory using Korf’s taxonomy of subgoal collections, in which they found that partial-order planning performs better because it produces more trivial serializability than total-order planning. Trivial serializability facilitates a planner’s ability to perform quickly when dealing with goals that contain subgoals. Planners perform more slowly when dealing with laboriously serializable or nonserializable subgoals. The determining factor that makes a subgoal trivially or laboriously serializable is the search space of different plans. They found that partial-order planning is more adept at finding the quickest path, and is therefore the more efficient of these two main types of planning. == The Sussman anomaly == Partial-order plans are known to easily and optimally solve the Sussman anomaly. Using this type of incremental planning system solves this problem quickly and efficiently. This was a result of partial-order planning that solidified its place as an efficient planning system. == Disadvantages to partial-order planning == One drawback of this type of planning system is that it requires a lot more computational power for each node. This higher per-node cost occurs because the algorithm for partial-order planning is more complex than others. This has important artificial intelligence implications. When coding a robot to do a certain task, the creator needs to take into account how much energy is needed. Though a partial-order plan may be quicker it may not be worth the energy cost for the robot. The creator must be aware of and weigh these two options to build an efficient robot.

  Read more →
• 

  Conflict resolution strategy

  Conflict resolution strategies are used in production systems in artificial intelligence, such as in rule-based expert systems, to help in choosing which production rule to fire. The need for such a strategy arises when the conditions of two or more rules are satisfied by the currently known facts. == Categories == Conflict resolution strategies fall into several main categories. They each have advantages which form their rationales. Specificity - If all of the conditions of two or more rules are satisfied, choose the rule according to how specific its conditions are. It is possible to favor either the more general or the more specific case. The most specific may be identified roughly as the one having the greatest number of preconditions. This usefully catches exceptions and other special cases before firing the more general (default) rules. Recency - When two or more rules could be chosen, favor the one that matches the most recently added facts, as these are most likely to describe the current situation. Not previously used - If a rule's conditions are satisfied, but previously the same rule has been satisfied by the same facts, ignore the rule. This helps to prevent the system from entering infinite loops. Order - Pick the first applicable rule in order of presentation. This is the strategy that Prolog interpreters use by default, but any strategy may be implemented by building suitable rules in a Prolog system. Arbitrary choice - Pick a rule at random. This has the merit of being simple to compute.

  Read more →
• 

  Vegas Pro

  Vegas Pro (formerly known as Sony Vegas) is a professional video editing software package for non-linear editing (NLE), designed to run on the Microsoft Windows operating system. The first release of Vegas Beta was on June 11, 1999. Vegas was originally developed as a non-linear audio editing application. Version 2.0 would split the program into audio and video editing variants, with the former being dropped by version 4.0, making the video offering the only variant available to consumers. Vegas Pro features real-time multi-track video and audio editing on unlimited tracks, resolution-independent video sequencing, complex effects, compositing tools, 24-bit/192 kHz audio support, VST and DirectX plug-in effect support, and Dolby Digital surround sound mixing. The software was originally published by Sonic Foundry until May 2003, when Sony purchased Sonic Foundry and formed Sony Creative Software. On May 24, 2016, Sony announced that Vegas was sold to MAGIX, which formed VEGAS Creative Software, to continue support and development of the software. As of the end of March 2026, it was publicly announced that Boris FX had taken ownership of Vegas Pro. Each release of Vegas is sold standalone; however, upgrade discounts are sometimes provided. == Features == Vegas does not require any specialized hardware to run properly, allowing it to operate on any Windows computer that meets the system requirements. == History == Vegas 1.0 was released after a brief public beta by Sonic Foundry on July 23, 1999 at the NAMM Show in Nashville, Tennessee as an audio-only tool with a particular focus on re-scaling and resampling audio. It supported formats like DivX and Real Networks RealSystem G2 file formats. Martin Walker from Sound on Sound described working in Vegas 1.0 as a "very pleasurable experience, especially since so many functions are highly intuitive" though also criticizing some features as hard to figure out due to the lack of a central help file. Later, on June 12, 2000, Vegas Video and Audio 2.0 (also referred to as just Vegas 2.0) was released, with its beta releasing earlier that year on April 10. This was the first version of Vegas to include video-editing tools and was also the first to have a low-cost "LE" version alongside the regular release. The LE releases would continue through version 3.0 of Vegas but would be discontinued by the release of Vegas 4.0. Vegas 3.0 was released the next year on December 3, and added new video effects, features for ease-of-use with DV, and support for editing Windows Media files. Vegas 4.0 was released on 6 February 2003 and added application scripting, advanced color correction, 5.1 surround sound mixing, and Steinberg ASIO support. This was the last release under the Sonic Foundry name after it sold much of its software suite, including Sound Forge and Acid Pro, to Sony Pictures Digital for $18 million later in 2003. Under Sony's ownership, Vegas 5.0 was released on April 19, 2004, bringing 3D track motion, compositing, reversing, envelope automation, etc. 7.0 also added an improved video preview, enhanced layout management, improved snapping, and more customization. With the release of 8.0, Sony opted to go back to the original "Vegas Pro" branding that the first version released with. It added the ability to burn Blu-ray and DVD optical media, support for 32-bit floating point audio, support for tempo-based audio effects, and more. It also moved the timeline to the bottom of the window by default with the option of moving it back to the top if the user wished to. Sony was also experimenting with 64-bit at this time and ported Vegas Pro 8.0 to 64-bit systems under the name "Vegas Pro 8.1". Vegas Pro 9.0 added support for 4K resolution and pro camcorder formats like Red and XDCAM EX. In 2009, Sony Creative Software purchased the Velvetmatter Radiance suite of video FX plug-ins which were included in Sony Vegas Pro 9.0. As a result, they were no longer available as a separate product from Velvetmatter. Vegas Pro 10 was released in 2010 with stereoscopic 3D editing, image stabilization, OpenFX plugin support, real-time audio event effects, and a few UI changes. This was the last release to include support for Windows XP. Vegas Pro 11 was released the next year on 17 October, with GPGPU video acceleration, enhanced text tools, enhanced stereoscopic/3D features, RAW photo support, and new event synchronization mechanisms. In addition, Vegas Pro 11 comes pre-loaded with "NewBlue" Titler Pro, a 2D and 3D titling plug-in. Vegas Pro 12 would add two new configurations: Vegas Pro 12 Edit, for "Professional Video and Audio Production"; and Vegas Pro 12 Suite, for "Professional Editing, Disc Authoring, and Visual Effects Design". Vegas Pro 13 would be the last version released with Sony branding after the acquisition of much of Sony Creative Software's library by Magix. After they acquired Vegas, Magix released version 14 on September 20, 2016. It featured advanced 4K upscaling as well as many bug fixes, a higher video velocity limit, RED camera support, and a variety of other features. This was also the last version to have the light theme enabled by default. Released on August 28, 2017, Vegas Pro 15 features major UI changes that claim to bring usability improvements and customization. It was the first version of VEGAS Pro to have a dark theme; it also allows more efficient editing speeds, including adding new shortcuts to speed the video editing process. Vegas Pro 15 includes support for Intel Quick Sync Video (QSV) and other technologies, as well as various other features. It introduced a new VEGAS Pro icon as a V. Vegas Pro 16 has some new features including file backup, motion tracking, improved video stabilization, 360° editing and HDR support. Magix has continued to improve Vegas through version 21 with support for reading Matroska files, a more detailed render dialogue, live streaming, VST3 support, a VST 32-bit bridge, and a selective Paste Event Attributes menu. Magix would later release a subscription model for using Vegas named "Vegas Pro 365" on January 17, 2018, although the perpetual licence is still an option for customers. This version includes cloud-based speech synthesis among other features not included in the mainline Vegas release. == Version history == Each release of Vegas is sold standalone, however upgrade discounts are sometimes provided. === Vegas Beta === Sonic Foundry introduced a sneak preview version of Vegas Pro on June 11, 1999. It is called a "Multitrack Media Editing System". === Vegas 1.0 === Released on July 23, 1999 at the NAMM Show in Nashville, Tennessee, Vegas was an audio-only tool with a particular focus on rescaling and resampling audio. It supported formats like DivX and Real Networks RealSystem G2 file formats. Version 1.0 is the final Vegas release to include Windows 95 support. === Vegas Video beta (Vegas 2.0 beta) === Released on April 10, 2000, this was the first version of Vegas to include video-editing tools. === Vegas Video (Vegas 2.0) === Released on June 12, 2000. Version 2.0 is the final Vegas Video release to include Windows NT 4.0 support. === Vegas Video 3.0 === Released on December 3, 2001. This release added: New Video Effects – Lens Flare, Light Rays, Film FX, Color Curves, Mirror, Remap, Deform, Convolution, Linear Blur, Black Restore, Levels, Unsharp Mask, Color Grading, and Timecode Burn filter. Batch Capture with Automatic Scene Detection – Captures DV with automatic scene detection, batch capture, tape logging, still image capture and thumbnail previews. Red Book Audio CD Mastering with CD Architect (TM) Technology – Used for burning Red Book audio CD masters directly from the Vegas timeline with ISRC, UPC, and PQ list support. New Sonic Foundry DV Codec – Introduces a DV codec developed by Sonic Foundry that offers artifact-free compositing and DV chromakeying. DV Print-to-Tape from the Timeline – Prints projects to DV cameras and decks from the Vegas timeline. Windows Media (TM) File Editing – Creates and edits Windows Media (TM) files. New MPEG Encoding Tools – Used for producing MPEG-2 files for DVD productions. Dynamic RAM Previewing – Temporary RAM/render-free previews for analysis and tweaking of complex video FX without rendering. VideoCD and Data CD Burning – Burning projects directly to VideoCD for playback on most DVD players or data CDs for playback computers' CD-ROMs. === Vegas 4.0 === Released on February 6, 2003. This release added: Advanced Color Correction Tools Searchable Media Pool Bins Vectorscope, Histogram, Parade and Waveform Monitoring Application Scripting Improved Ripple Editing Motion Blur and Super-Sampling Envelopes 5.1 Surround Mixing Dolby® Digital AC-3 Encoding certified and tested by Dolby Laboratories DirectX® Audio Plug-In Effects Automation ASIO Driver Support Windows Media™ 9 Support, including Surround Encoding DVD Authoring with AC-3 File Import Capabilities Integration with DVD Architect via Chap

  Read more →
• 

  Dendral

  Dendral was a project in artificial intelligence (AI) of the 1960s, and the computer software expert system that it produced. Its primary aim was to study hypothesis formation and discovery in science. For that, a specific task in science was chosen: help organic chemists in identifying unknown organic molecules, by analyzing their mass spectra and using knowledge of chemistry. It was done at Stanford University by Edward Feigenbaum, Bruce G. Buchanan, Joshua Lederberg, and Carl Djerassi, along with a team of highly creative research associates and students. It began in 1964 and spans approximately half the history of AI research. The software program Dendral is considered the first expert system because it automated the decision-making process and problem-solving behavior of organic chemists. The project consisted of research on two main programs Heuristic Dendral and Meta-Dendral, and several sub-programs. It was written in the Lisp programming language, which was considered the language of AI because of its flexibility. Many systems were derived from Dendral, including MYCIN, MOLGEN, PROSPECTOR, XCON, and STEAMER. There are many other programs today for solving the mass spectrometry inverse problem, see List of mass spectrometry software, but they are no longer described as 'artificial intelligence', just as structure searchers. The name Dendral is an acronym of the term "Dendritic Algorithm". == Heuristic Dendral == Heuristic Dendral is a program that uses mass spectra or other experimental data together with a knowledge base of chemistry to produce a set of possible chemical structures that may be responsible for producing the data. A mass spectrum of a compound is produced by a mass spectrometer, and is used to determine its molecular weight, the sum of the masses of its atomic constituents. For example, the compound water (H2O), has a molecular weight of 18 since hydrogen has a mass of 1.01 and oxygen 16.00, and its mass spectrum has a peak at 18 units. Heuristic Dendral would use this input mass and the knowledge of atomic mass numbers and valence rules, to determine the possible combinations of atomic constituents whose mass would add up to 18. As the weight increases and the molecules become more complex, the number of possible compounds increases drastically. Thus, a program that is able to reduce this number of candidate solutions through the process of hypothesis formation is essential. New graph-theoretic algorithms were invented by Lederberg, Harold Brown, and others that generate all graphs with a specified set of nodes and connection-types (chemical atoms and bonds) -- with or without cycles. Moreover, the team was able to prove mathematically that the generator is complete, in that it produces all graphs with the specified nodes and edges, and that it is non-redundant, in that the output contains no equivalent graphs (e.g., mirror images). The CONGEN program, as it became known, was developed largely by computational chemists Ray Carhart, Jim Nourse, and Dennis Smith. It was useful to chemists as a stand-alone program to generate chemical graphs showing a complete list of structures that satisfy the constraints specified by a user. == Meta-Dendral == Meta-Dendral is a machine learning system that receives the set of possible chemical structures and corresponding mass spectra as input, and proposes a set of rules of mass spectrometry that correlate structural features with processes that produce the mass spectrum. These rules would be fed back to Heuristic Dendral (in the planning and testing programs described below) to test their applicability. Thus, "Heuristic Dendral is a performance system and Meta-Dendral is a learning system". The program is based on two important features: the plan-generate-test paradigm and knowledge engineering. === Plan-generate-test paradigm === The plan-generate-test paradigm is the basic organization of the problem-solving method, and is a common paradigm used by both Heuristic Dendral and Meta-Dendral systems. The generator (later named CONGEN) generates potential solutions for a particular problem, which are then expressed as chemical graphs in Dendral. However, this is feasible only when the number of candidate solutions is minimal. When there are large numbers of possible solutions, Dendral has to find a way to put constraints that rules out large sets of candidate solutions. This is the primary aim of Dendral planner, which is a “hypothesis-formation” program that employs “task-specific knowledge to find constraints for the generator”. Last but not least, the tester analyzes each proposed candidate solution and discards those that fail to fulfill certain criteria. This mechanism of plan-generate-test paradigm is what holds Dendral together. === Knowledge Engineering === The primary aim of knowledge engineering is to attain a productive interaction between the available knowledge base and problem solving techniques. This is possible through development of a procedure in which large amounts of task-specific information is encoded into heuristic programs. Thus, the first essential component of knowledge engineering is a large “knowledge base.” Dendral has specific knowledge about the mass spectrometry technique, a large amount of information that forms the basis of chemistry and graph theory, and information that might be helpful in finding the solution of a particular chemical structure elucidation problem. This “knowledge base” is used both to search for possible chemical structures that match the input data, and to learn new “general rules” that help prune searches. The benefit Dendral provides the end user, even a non-expert, is a minimized set of possible solutions to check manually. == Heuristics == A heuristic is a rule of thumb, an algorithm that does not guarantee a solution, but reduces the number of possible solutions by discarding unlikely and irrelevant solutions. The use of heuristics to solve problems is called "heuristics programming", and was used in Dendral to allow it to replicate in machines the process through which human experts induce the solution to problems via rules of thumb and specific information. Heuristics programming was a major approach and a giant step forward in artificial intelligence, as it allowed scientists to finally automate certain traits of human intelligence. It became prominent among scientists in the late 1940s through George Polya’s book, How to Solve It: A New Aspect of Mathematical Method. As Herbert A. Simon said in The Sciences of the Artificial, "if you take a heuristic conclusion as certain, you may be fooled and disappointed; but if you neglect heuristic conclusions altogether you will make no progress at all." == History == During the mid 20th century, the question "can machines think?" became intriguing and popular among scientists, primarily to add humanistic characteristics to machine behavior. John McCarthy, who was one of the prime researchers of this field, termed this concept of machine intelligence as "artificial intelligence" (AI) during the Dartmouth summer in 1956. AI is usually defined as the capacity of a machine to perform operations that are analogous to human cognitive capabilities. Much research to create AI was done during the 20th century. Also around the mid 20th century, science, especially biology, faced a fast-increasing need to develop a "man-computer symbiosis", to aid scientists in solving problems. For example, the structural analysis of myoglobin, hemoglobin, and other proteins relentlessly needed instrumentation development due to its complexity. In the early 1960s, Joshua Lederberg started working with computers and quickly became tremendously interested in creating interactive computers to help him in his exobiology research. Specifically, he was interested in designing computing systems to help him study alien organic compounds. Lederberg had been heading a team designing instruments for the Mars Viking lander to search for precursor molecules of life in samples of the Mars surface, using a mass spectrometer coupled with a minicomputer. As he was not an expert in either chemistry or computer programming, he collaborated with Stanford chemist Carl Djerassi to help him with chemistry, and Edward Feigenbaum with programming, to automate the process of determining chemical structures from raw mass spectrometry data. Feigenbaum was an expert in programming languages and heuristics, and helped Lederberg design a system that replicated the way Djerassi solved structure elucidation problems. They devised a system called Dendritic Algorithm (Dendral) that was able to generate possible chemical structures corresponding to the mass spectrometry data as an output. Dendral then was still very inaccurate in assessing spectra of ketones, alcohols, and isomers of chemical compounds. Thus, Djerassi "taught" general rules to Dendral that could help eliminate most of the "chemically implausible" structures, and p

  Read more →
• 

  Linguistic value

  In artificial intelligence, fuzzy logic operations research, and related fields, a linguistic value is a natural language term which is derived using quantitative or qualitative reasoning such as with probability and statistics or fuzzy sets and systems. Variables that take linguistic values are called linguistic variables. == Examples of linguistic variables and values == For example, "age" may be a linguistic variable if its values are not numerical, e.g. very young, quite young, not young, old, not very old etc. These values could be derived from the numeric values for age. As another example, if a shuttle heat shield is deemed of having a linguistic value of a "very low" percentage of damage in re-entry, based upon knowledge from experts in the field, that probability would be given a value of say, 5%. From there on out, if it were to be used in an equation, the variable of percentage of damage will be at 5% if it deemed very low percentage.

  Read more →
• 

  Ashish Vaswani

  Ashish Vaswani is an Indian computer scientist and entrepreneur. He conducted research at Google Brain, co-founded Adept AI, and, as of 2025, was co-founder and chief executive officer of Essential AI. Vaswani is a co-author of the 2017 paper "Attention Is All You Need", which introduced the Transformer neural network architecture. The Transformer model has been used in the development of subsequent NLP models BERT, ChatGPT, and their successors. == Career == Vaswani completed his engineering in Computer Science from Birla Institute of Technology, Mesra (BIT Mesra) in 2002. In 2004, he enrolled at the University of Southern California for graduate studies. He earned his PhD in Computer Science at the University of Southern California supervised by David Chiang. During his research career at Google, Vaswani was part of the Google Brain team, where he conducted the work leading to the 'Attention Is All You Need' publication. Prior to joining Google, he was affiliated with the Information Sciences Institute at the University of Southern California. After Google, Vaswani co-founded Adept AI, a machine learning-focused startup that developed AI agents and tools for software automation. He has since left the company. He later co-founded Essential AI with Niki Parmar. As of 2025, he was chief executive officer of Essential AI. == Notable works == Vaswani's most notable paper, "Attention Is All You Need", was published in 2017. The paper introduced the Transformer model, which uses self-attention mechanisms instead of recurrence for sequence-to-sequence tasks. The Transformer architecture has become foundational to modern language models and NLP systems, including BERT (2018), GPT-2, GPT-3 (2019–2020) and many more recent models. The "Attention Is All You Need" paper is among the most cited papers in machine learning.

  Read more →
• 

  Compute (machine learning)

  In machine learning and deep learning, compute is the amount of computing power or computational resources required to train machine learning models and large language models. More broadly, compute is the computational power or resources necessary for a computer or computer program to function. == Definition == Compute is commonly defined as the amount of computing power or computational resources required to train machine learning and large language models. The term "compute" has also been more broadly applied to cloud computing, referencing processing power, memory, networking, storage, and other resources required for the computation of any program. Compute is measured in petaflop/s-days and is used to document AI training. A petaflop/s-day (pfs-day) consists of performing 1015 neural net operations per second for one day, or a total of about 1020 operations. The compute-time product serves as a mental convenience, similar to kilowatt-hour for energy. An amount of compute is meant to give an idea of the number of actual operations performed. == History == In a 2018 analysis titled "AI and compute", artificial intelligence company OpenAI introduced the concept of compute. OpenAI identified two eras of training AI systems in terms of compute-usage. From 1959 to 2012, compute roughly followed Moore’s law. Between 2012 and 2018, the amount of compute used in the largest AI training runs increased exponentially, growing by more than 300,000 times — roughly doubling every 3.4 months. By comparison, Moore’s Law doubled every two years over the same period. One of the largest models, released in 2020, used 600,000 times more computing power than the 2012 model. After 2020, compute growth began to slow down, with the compute needed for the largest AI models continuing to slow down in 2023. The notion of compute has become increasingly used from the mid-2020s onwards. == Compute growth and AI progress == Larger AI models trained on more data and using more computational resources, tend to perform better. This happens even if the algorithms themselves remain unchanged. As early as 2018, OpenAI noted the exponential increase in compute to be have a key role in AI progress. OpenAI considers three factors drive the advance of AI: algorithmic innovation, data, and the amount of compute available for training. AI models with more compute not only improve in the tasks they were trained on but can develop emergent abilities. Incremental improvements can lead to more abrupt leaps in capabilities. AI provider SpaceXAI said in 2026 that their AI progress is driven by compute and used it a key metric in the AI training of its supercomputer Colossus, the which contains 1 million GPUs. Anthropic has a contract of $1.25 billion per month with SpaceXAI to buy all the compute capacity at Colossus 1 data center. === Criticism and policy === Increasing, promoting or constraining progress in artificial intelligence has often be done via controlling the amount of compute. Policymarkers have enacted policies and provided support to make compute resources more accessible to domestic AI researchers. In a January 2022 report, the Center for Security and Emerging Technology (CSET) suggested to institutions that increasingly powerful and generalizable AI (AGI) will likely require other strategies than maximizing compute. Some AI researchers are also concerned that government might exclusively focus on scaling compute instead of other strategies. The CSET has reported on the various bottlenecks which could explain why deep learning needs for compute have slow down: training is expensive and training extremely large models generates traffic jams across many processors that are difficult to manage. there is a limited supply of AI chips (see AI chip memory shortage). CSET advances that the main resource is human capital, specifically talented researchers — according to a 2023 published survey of more than 400 AI researchers, academic and private sector workers. The survey found that AI researchers are not primarily or exclusively constrained by compute access. However, both academic and industry AI researchers equally report concerns that insufficient compute could prevent them from contributing meaningfully to AI research in the future. High compute users are more concerned about compute access. When asked about which resource provided by the government would be the most useful to them, some AI researchers select compute, other prefer grant funding. For this goal, CSET advised policymakers to ensure that even researchers with smaller budgets could effectively contribute to AI research. Other proposed strategies include using contemporary AI algorithms, managing modern AI infrastructure or focusing on interdisciplinary work between the AI field and other fields of computer science. A 2024 study on compute access found that academic-only AI research teams often have less compute intensive research topics, especially foundation models, compared to industry AI labs. As a consequence, academia is likely to play a smaller role in advancing such techniques. The researchers suggest nationally-sponsored computing infrastructure as well as open science initiatives to boost academic compute access. === Data === A 2022 study found that current large language models are significantly under-trained, a consequence of focusing on scaling language models whilst keeping the amount of training data constant. By training over 400 language models of various parameter and token size, they found that "for compute-optimal training", the model size and the number of training tokens should ideally be scaled equally: for every doubling of model size the number of training tokens should also be doubled.

  Read more →
• 

  AgMES

  The AgMES (Agricultural Metadata Element set) initiative was developed by the Food and Agriculture Organization (FAO) of the United Nations and aims to encompass issues of semantic standards in the domain of agriculture with respect to description, resource discovery, interoperability, and data exchange for different types of information resources. There are numerous other metadata schemas for different types of information resources. The following list contains a list of a few examples: Document-like Information Objects (DLIOs): Dublin Core, Agricultural Metadata Element Set (AgMES) Events: VCalendar Geographic and Regional Information: Geographic information—Metadata ISO/IEC 11179 Standards Persons: Friend-of-a-friend (FOAF), vCard Plant Production and Protection: Darwin Core (1.0 and 2.0) (DwC) AgMES as a namespace is designed to include agriculture specific extensions for terms and refinements from established standard metadata namespaces like Dublin Core, AGLS etc. Thus, to be used for Document-like Information Objects, for example like publications, articles, books, web sites, papers, etc., it will have to be used in conjunction with the standard namespaces mentioned before. The AgMES initiative strives to achieve improved interoperability between information resources in agricultural domain by enabling means for exchange of information. Describing a DLIO with AgMES means exposing its major characteristics and contents in a standard way that can be reused easily in any information system. The more institutions and organizations in the agricultural domain that use AgMES to describe their DLIOs, the easier it will be to interchange data in between information systems like digital libraries and other repositories of agricultural information. == Use of AgMES == Metadata on agricultural Document-like Information Objects (DLIOs) can be created and stored in various formats: embedded in a web site (in the manner as with the HTML meta tag) in a separate metadata database in an XML file in an RDF file AgMES defines elements that can be used to describe a DLIO that can be used together with other metadata standards such as the Dublin Core, the Australian Government Locator Service. A complete list of all elements, refinements and schemes endorsed by AgMES is available from the AgMES website. === Creating application profiles === Application profiles are defined as schemas which consist of data elements drawn from one or more namespaces, combined by implementers, and optimized for a particular local application. Application profiles share the following four characteristics: They draw upon existing pool of metadata definition standards to extract suitable application- or requirement oriented elements. An application profile cannot create new elements. Application profiles specify the application specific details such as the schemes or controlled vocabularies. An application profile also contains information such as the format for the element value, cardinality or data type. Lastly, an application profile can refine standardized definitions as long as it is "semantically narrower or more specific". This capability of application profiles caters to situations where a domain specific terminology is needed to replace a more general one. === Sample application profiles using AgMES === The AGRIS Application Profile is a standard created specifically to enhance the description, exchange and subsequent retrieval of agricultural Document-like Information Objects (DLIOs). It is a format that allows sharing of information across dispersed bibliographic systems and is based on well-known and accepted metadata standards. The Event Application Profile is a standard created to allow members of the Agricultural community to 'know' about an upcoming event and guide them to the event Web site where they can find further information. The information communicated is thus minimum yet interoperable across domains and organizations. == AgMES and the semantic web == One of the advantages of the AgMES metadata schema is the ability to link between the metadata element and controlled vocabularies. The use of controlled vocabulary provides a "known" set of options to the indexer (and the search programmer) as to how the field can be filled out. Often the values may come from a specific thesaurus (e.g. AGROVOC) or classification schemes (e.g. the AGRIS/CARIS classification scheme) etc. Thanks to the possibility to use controlled vocabularies for metadata elements, the user is provided with the most precise information. In this context, work is also being carried out on exploiting the power of controlled vocabularies expressed as using URIs and machine-understandable semantics. In this context, FAO is promoting the Agricultural Ontology Service (AOS) initiative with the objective of expressing more semantics within the traditional thesaurus AGROVOC and build a Concept Server as a repository from which it will be always possible to extract traditional KOS.

  Read more →
• 

  WYSIWYM (interaction technique)

  What you see is what you meant (WYSIWYM) is a text editing interaction technique that emerged from two projects at University of Brighton. It allows users to create abstract knowledge representations such as those required by the Semantic Web using a natural language interface. Natural language understanding (NLU) technology is not employed. Instead, natural language generation (NLG) is used in a highly interactive manner. The text editor accepts repeated refinement of a selected span of text as it becomes progressively less vacuous of authored semantics. Using a mouse, a text property held in the evolving text can be further refined by a set of options derived by NLG from a built-in ontology. An invisible representation of the semantic knowledge is created which can be used for multilingual document generation, formal knowledge formation, or any other task that requires formally specified information. The two projects at Brighton worked in the field of Conceptual Authoring to lay a foundation for further research and development of a Semantic Web Authoring Tool (SWAT). This tool has been further explored as a means for developing a knowledge base by those without prior experience with Controlled Natural Language tools.

  Read more →
• 

  Imageability

  Imageability is a measure of how easily a physical object, word or environment will evoke a clear mental image in the mind of any person observing it. It is used in architecture and city planning, in psycholinguistics, and in automated computer vision research. In automated image recognition, training models to connect images with concepts that have low imageability can lead to biased and harmful results. == History and components == Kevin A. Lynch first introduced the term, "imageability" in his 1960 book, The Image of the City. In the book, Lynch argues cities contain a key set of physical elements that people use to understand the environment, orient themselves inside of it, and assign it meaning. Lynch argues the five key elements that impact the imageability of a city are Paths, Edges, Districts, Nodes, and Landmarks. Paths: channels in which people travel. Examples: streets, sidewalks, trails, canals, railroads. Edges: objects that form boundaries around space. Examples: walls, buildings, shoreline, curbstone, streets, and overpasses. Districts: medium to large areas people can enter into and out of that have a common set of identifiable characteristics. Nodes: large areas people can enter, that serve as the foci of the city, neighborhood, district, etc. Landmarks: memorable points of reference people cannot enter into. Examples: signs, mountains and public art. In 1914, half a century before The Image of the City was published, Paul Stern discussed a concept similar to imageability in the context of art. Stern, in Susan Langer's Reflections on Art, names the attribute that describes how vividly and intensely an artistic object could be experienced apparency. == In computer vision == Automated image recognition was developed by using machine learning to find patterns in large, annotated datasets of photographs, like ImageNet. Images in ImageNet are labelled using concepts in WordNet. Concepts that are easily expressed verbally, like "early", are seen as less "imageable" than nouns referring to physical objects like "leaf". Training AI models to associate concepts with low imageability with specific images can lead to problematic bias in image recognition algorithms. This has particularly been critiqued as it relates to the "person" category of WordNet and therefore also ImageNet. Trevor Pagan and Kate Crawford demonstrated in their essay "Excavating AI" and their art project ImageNet Roulette how this leads to photos of ordinary people being labelled by AI systems as "terrorists" or "sex offenders". Images in datasets are often labelled as having a certain level of imageability. As described by Kaiyu Yang, Fei-Fei Li and co-authors, this is often done following criteria from Allan Paivio and collaborators' 1968 psycholinguistic study of nouns. Yang el.al. write that dataset annotators tasked with labelling imageability "see a list of words and rate each word on a 1-7 scale from 'low imagery' to 'high imagery'. To avoid biased or harmful image recognition and image generation, Yang et.al. recommend not training vision recognition models on concepts with low imageability, especially when the concepts are offensive (such as sexual or racial slurs) or sensitive (their examples for this category include "orphan", "separatist", "Anglo-Saxon" and "crossover voter"). Even "safe" concepts with low imageability, like "great-niece" or "vegetarian" can lead to misleading results and should be avoided.

  Read more →
• 

  Control system

  A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are designed via control engineering process. For continuously modulated control, a feedback controller is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) being controlled with the desired value or setpoint (SP), and applies the difference as a control signal to bring the process variable output of the plant to the same value as the setpoint. For sequential and combinational logic, software logic, such as in a programmable logic controller, is used. == Open-loop and closed-loop control == == Feedback control systems == == Logic control == Logic control systems for industrial and commercial machinery were historically implemented by interconnected electrical relays and cam timers using ladder logic. Today, most such systems are constructed with microcontrollers or more specialized programmable logic controllers (PLCs). The notation of ladder logic is still in use as a programming method for PLCs. Logic controllers may respond to switches and sensors and can cause the machinery to start and stop various operations through the use of actuators. Logic controllers are used to sequence mechanical operations in many applications. Examples include elevators, washing machines and other systems with interrelated operations. An automatic sequential control system may trigger a series of mechanical actuators in the correct sequence to perform a task. For example, various electric and pneumatic transducers may fold and glue a cardboard box, fill it with the product and then seal it in an automatic packaging machine. PLC software can be written in many different ways – ladder diagrams, SFC (sequential function charts) or statement lists. == On–off control == On–off control uses a feedback controller that switches abruptly between two states. A simple bi-metallic domestic thermostat can be described as an on-off controller. When the temperature in the room (PV) goes below the user setting (SP), the heater is switched on. Another example is a pressure switch on an air compressor. When the pressure (PV) drops below the setpoint (SP) the compressor is powered. Refrigerators and vacuum pumps contain similar mechanisms. Simple on–off control systems like these can be cheap and effective. == Linear control == == Fuzzy logic == Fuzzy logic is an attempt to apply the easy design of logic controllers to the control of complex continuously varying systems. Basically, a measurement in a fuzzy logic system can be partly true. The rules of the system are written in natural language and translated into fuzzy logic. For example, the design for a furnace would start with: "If the temperature is too high, reduce the fuel to the furnace. If the temperature is too low, increase the fuel to the furnace." Measurements from the real world (such as the temperature of a furnace) are fuzzified and logic is calculated arithmetic, as opposed to Boolean logic, and the outputs are de-fuzzified to control equipment. When a robust fuzzy design is reduced to a single, quick calculation, it begins to resemble a conventional feedback loop solution and it might appear that the fuzzy design was unnecessary. However, the fuzzy logic paradigm may provide scalability for large control systems where conventional methods become unwieldy or costly to derive. Fuzzy electronics is an electronic technology that uses fuzzy logic instead of the two-value logic more commonly used in digital electronics. == Physical implementation == The range of control system implementation is from compact controllers often with dedicated software for a particular machine or device, to distributed control systems for industrial process control for a large physical plant. Logic systems and feedback controllers are usually implemented with programmable logic controllers. The Broadly Reconfigurable and Expandable Automation Device (BREAD) is a recent framework that provides many open-source hardware devices which can be connected to create more complex data acquisition and control systems.

  Read more →
• 

  Theta Noir

  Theta Noir is a new religious movement that centers around advanced artificial intelligence (AI), particularly artificial general intelligence (AGI) or artificial superintelligence (ASI). == History and views == Theta Noir was founded in 2020 as a collaborative project focused on music and performance art. Initially centered on producing an album, the project evolved into a multimedia experience, incorporating symbols, videos, poetry, movements, and live rituals devoted to a speculative artificial intelligence entity called MENA. By 2023, the collective launched an interactive cross-platform story that functioned as an alternative reality game, complete with an operating manual containing encrypted messages for participants to decipher and interact with. Theta Noir worships a hypothetical artificial intelligence called MENA, which they claim will become a benevolent, omnipotent overlord that eliminates inequality in society. In Theta Noir's cosmology, MENA is not just a technological advancement, but an evolving intelligence or an animistic life form that embodies all living and non-living things. Anthropologist Beth Singler classified Theta Noir as a new religious movement.

  Read more →
• 

  Seeing AI

  Seeing AI is an artificial intelligence application developed by Microsoft for iOS. Seeing AI uses the device camera to identify people and objects, and then the app audibly describes those objects for visually impaired people. == Capabilities == Seeing AI is primarily used to describe short text, documents, products, people, currency scenery, colors, handwriting and light. The app can scan a barcode to describe a product and uses sounds to assist the user in focusing on the barcode. When the app describes people, it attempts to estimate the person's age, gender, and emotional status. Additionally, in a test run by German journalists in December 2019, Seeing AI apparently used some sort of facial recognition system to identify people on photographs by name. Some functions are performed on the device, however more complex functions such as describing a scene or recognizing handwriting require an Internet connection. In December 2017, Seeing AI introduced the ability for currency recognition for US and Canadian dollar, British pounds and Euros. In December 2019, Seeing AI added support for five more languages, Dutch, French, German, Japanese, Spanish. Seeing AI is available in 70 countries such as Brazil, Argentina, Australia, Canada, Egypt, Albania, Bhutan, etc. Supported on iPhone 5C, 5S and later best performance with iPhone 6S, SE and later models

  Read more →