AI Generator Text To Human

AI Generator Text To Human — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Metadata repository

  A metadata repository is a database created to store metadata. Metadata is information about the structures that contain the actual data. Metadata is often said to be "data about data", but this is misleading. Data profiles are an example of actual "data about data". Metadata adds one layer of abstraction to this definition– it is data about the structures that contain data. Metadata may describe the structure of any data, of any subject, stored in any format. A well-designed metadata repository typically contains data far beyond simple definitions of the various data structures. Typical repositories store dozens to hundreds of separate pieces of information about each data structure. Comparing the metadata of a couple data items - one digital and one physical - clarify what metadata is: First, digital: For data stored in a database one may have a table called "Patient" with many columns, each containing data which describes a different attribute of each patient. One of these columns may be named "Patient_Last_Name". What is some of the metadata about the column that contains the actual surnames of patients in the database? We have already used two items: the name of the column that contains the data (Patient_Last_Name) and the name of the table that contains the column (Patient). Other metadata might include the maximum length of last name that may be entered, whether or not last name is required (can we have a patient without Patient_Last_Name?), and whether the database converts any surnames entered in lower case to upper case. Metadata of a security nature may show the restrictions which limit who may view these names. Second, physical: For data stored in a brick and mortar library, one have many volumes and may have various media, including books. Metadata about books would include ISBN, Binding_Type, Page_Count, Author, etc. Within Binding_Type, metadata would include possible bindings, material, etc. This contextual information of business data include meaning and content, policies that govern, technical attributes, specifications that transform, and programs that manipulate. == Definition == The metadata repository is responsible for physically storing and cataloging metadata. Data in a metadata repository should be generic, integrated, current, and historical: Generic Meta model should store the metadata by generic terms instead of storing it by an applications-specific defined way, so that if your data base standard changes from one product to another the physical meta model of the metadata repository would not need to change. Integration of the metadata repository allows all business areas' metadata to be in an integrated fashion: Covering all domains and subject areas of the organization. current and historical The metadata repository should have accessible current and historical metadata. Metadata repositories used to be referred to as a data dictionary. With the transition of needs for the metadata usage for business intelligence has increased so is the scope of the metadata repository increased. Earlier data dictionaries are the closest place to interact technology with business. Data dictionaries are the universe of metadata repository in the initial stages but as the scope increased Business glossary and their tags to variety of status flags emerged in the business side while consumption of the technology metadata, their lineage and linkages made the repository, the source for valuable reports to bring business and technology together and helped data management decisions easier as well as assess the cost of the changes. Metadata repository explores the enterprise wide data governance, data quality and master data management (includes master data and reference data) and integrates this wealth of information with integrated metadata across the organization to provide decision support system for data structures, even though it only reflects the structures consumed from various systems. == Repository vs. registry == Repository has additional functionalities compared with registry. Metadata repository not only stores metadata like Metadata registry but also adds relationships with related metadata types. Metadata when related in a flow from its point of entry into organization up to the deliverables is considered as the lineage of that data point. Metadata when related across other related metadata types is called linkages. By providing the relationships to all the metadata points across the organization and maintaining its integrity with an architecture to handle the changes, metadata repository provides the basic material for understanding the complete data flow and their definitions and their impact. Also the important feature is to maintain the version control though this statement for contrasting is open for discussion. These definitions are still evolving, so the accuracy of the definitions needs refinement. The purpose of registry is to define the metadata element and maintained across the organization. And data models and other data management teams refer to the registry for any changes to follow. While Metadata repository sources metadata from various metadata systems in the organizations and reflects what is in the upstream. Repository never acts as an upstream while registry is used as an upstream for metadata changes. == Reason for use == Metadata repository enables all the structure of the organizations data containers to one integrated place. This opens plethora of resourceful information for making calculated business decisions. This tool uses one generic form of data model to integrate all the models thus brings all the applications and programs of the organization into one format. And on top of it applying the business definitions and business processes brings the business and technology closer that will help organizations make reliable roadmaps with definite goals. With one stop information, business will have more control on the changes, and can do impact analysis of the tool. Usually business spends much time and money to make decisions based on discovery and research on impacts to make changes or to add new data structures or remove structures in data management of the organization. With a structured and well maintained repository, moving the product from ideation to delivery takes the least amount of time (considering other variables are constant). To sum it up: Integration of the metadata across the organization Build relationship between various metadata types Build relationship between various disparate systems Define business golden copy of definitions Version control of the changes at structure level Interaction with Reference data Link view to master data Automatic synchronization with various authorized metadata source systems More control to business decisions Validate the structures by overlapping the models Discovering discrepancies, gaps, lineage, metrics at data structure level Each database management system (DBMS) and database tools have their own language for the metadata components within. Database applications already have their own repositories or registries that are expected to provide all of the necessary functionality to access the data stored within. Vendors do not want other companies to be capable of easily migrating data away from their products and into competitors products, so they are proprietary with the way they handle metadata. CASE tools, DBMS dictionaries, ETL tools, data cleansing tools, OLAP tools, and data mining tools all handle and store metadata differently. Only a metadata repository can be designed to store the metadata components from all of these tools. == Design == Metadata repositories should store metadata in four classifications: ownership, descriptive characteristics, rules and policies, and physical characteristics. Ownership, showing the data owner and the application owner. The descriptive characteristics, define the names, types and lengths, and definitions describing business data or business processes. Rules and policies, will define security, data cleanliness, timelines for data, and relationships. Physical characteristics define the origin or source, and physical location. Like building a logical data model for creating a database, a logical meta model can help identify the metadata requirements for business data. The metadata repository will be centralized, decentralized, or distributed. A centralized design means that there is one database for the metadata repository that stores metadata for all applications business wide. A centralized metadata repository has the same advantages and disadvantages of a centralized database. Easier to manage because all the data is in one database, but the disadvantage is that bottlenecks may occur. A decentralized metadata repository stores metadata in multiple databases, either separated by location and or departments of the business. This makes management of the repository more involved than a centraliz

  Read more →
• 

  Library history

  Library history is a subdiscipline within library science and library and information science focusing on the history of libraries and their role in societies and cultures. Some see the field as a subset of information history. Library history is an academic discipline and should not be confused with its object of study (history of libraries): the discipline is much younger than the libraries it studies. Library history begins in ancient societies through contemporary issues facing libraries today. Topics include recording mediums, cataloguing systems, scholars, scribes, library supporters and librarians. == Earliest libraries == The earliest records of a library institution as it is presently understood can be dated back to around 5,000 years ago in the Southwest Asian regions of the world. One of the oldest libraries found is that of the ancient library at Ebla (circa 2500 BCE) in present-day Syria. In the 1970s, the excavation at Ebla's library unearthed over 20,000 clay tablets written in cuneiform script. === Library in Mesopotamia === The Assyrian King Assurbanipal created one of the greatest libraries in Nineveh in the seventh century BCE. The collection consisted of over 30,000 tablets written in a variety of languages. The collection was cataloged both by the shape of the tablet and by the subject of the content. The library had separate rooms for the different topics: government, history, law, astronomy, geography, and so on. The tablets also contained myths, hymns, and even jokes. Assurbanipal would send scribes to visit every corner of his kingdom to copy the content of other libraries. His library contained many of the most important literary works of the day, including the epic of Gilgamesh. Assurbanipal's Royal Library also had one of the first library catalogs. Unfortunately, Nineveh was eventually destroyed, and the library was lost in a fire. === Libraries in Ancient Greece === The Greek government was the first to sponsor public libraries. By 500 BCE both Athens and Samos had begun creating libraries for the public, though as most of the population was illiterate these spaces were serving a small, educated portion of the community. Athens developed a city archive at the Metroon in 405 BCE, where documents were stored in sealed jars. These would have saved the documents, but they would have been difficult to consult regularly. In Paros, around the same time, contracts were placed in the temple for safe keeping, and a book curse was placed for extra protection. === Library of Alexandria === The Library at Alexandria, Egypt, was renowned in the third century BCE while kings Ptolemy I Soter and Ptolemy II Philadelphus reigned. The library included a museum, garden, meeting areas and of course reading rooms. The Great Library, as it is known, was one of many in Alexandria. From its inception around the second century BCE, Alexandria was a well-known center for learning. It earned renown as the intellectual capital of the Western world up through the third century CE. The librarians at Alexandria collected, copied, and organized scrolls from across the known world. According to a primary source, every ship that came to Alexandria was required to hand over their books to be copied, and the copies would be returned to the owner, the library keeping the original. The Library of Alexandria was damaged by various disasters over time, including fire, invasion, and earthquake. Scholars believe the collection slowly diminished over time due to theft and efforts to remove it ahead of invading armies. While there are popular stories about how the library was ultimately destroyed, most of these are more myth than fact. === Libraries in Rome === Julius Caesar and his successor Augustus were the first to establish public libraries in ancient Rome, including the library of Apollo on the Palatine Hill. Several emperors followed suit over the next four centuries, including Hadrian, Tiberius, and Vespasian. Roman aristocrats also had personal libraries, which usually contained works in both Greek and Latin. A valuable example of this has been found at Herculaneum near Pompeii. Papyrus manuscripts in Herculaneum's Villa of the Papyri were encased in ash after the eruption of Vesuvius in 79 CE. Modern archaeology is now able to scan these artifacts and discern their contents, including many writings from Philodemus. The average Roman would not have been familiar with books beyond what they might hear read aloud in the forum. Public figures would pay for particular passages to be read aloud to the public from the steps of a public library. === Libraries in the Middle Ages === In the European Middle Ages, libraries began to become more prevalent, despite a widespread reduction in new writing beyond religious themes. Most libraries were initially connected to monasteries or religious institutions. Scriptoriums copied Christian religious texts to share with other religious centers or to be read aloud to their own parishioners. The Holy Roman Emperor Charlemagne (r. 786-814) had a large impact on the advancement of written culture in the Medieval Christian world, acquiring as many written works as he could, and employing many scribes to copy and recirculate vernacular versions of religious works. Most of the text held in small personal libraries was still religious in nature. == Early modern libraries == === Libraries of the Renaissance === During the Renaissance era the merchant middle class grew, and more people found benefits in education. They relied on libraries as a place to study and gain knowledge. Libraries provided a valuable resource, enriching the culture of those who were educated. Universities that had been started in the Middle Ages, founded their own libraries. Books in these libraries could not be borrowed from these libraries and were generally chained to the shelves to prevent theft. As more of the population became literate, new ideas like Humanism and Natural Law spawned an increase personal libraries, although they remained small. Gutenberg's invention of the printing press in 1456 opened the door to the modern era for libraries. == Oldest working libraries == According to the German librarian Michael Knoche, it is not possible to determine which library is the “oldest”: "Precise year dates are a construct, especially in the case of very old libraries. When a collection of books deserves to be called a library depends very much on the point of view of the observer." Various libraries are referred to as the “oldest”: The library founded in the 6th century of the Saint Catherine's Monastery in Sinai is "reputedly the oldest continuously run library in existence today", according to the Library of Congress. Its collection of religious and secular manuscripts is ranging from Bibles, liturgies and prayer books to legal documents such as deeds, court cases and fatwahs (legal opinions). The Al Qarawiyyin Library was founded in 859 by Fatima al-Fihri and is often regarded as the oldest working library in the world. It is in Fez, Morocco and is part of the oldest continually operating university in the world, the University of al-Qarawiyyin. The library houses approximately 4,000 ancient Islamic manuscripts. These manuscripts include 9th century Qurans and the oldest known accounts of the Islamic prophet Muhammed. The Malatestiana Library (Italian: Biblioteca Malatestiana) is a public library in the city of Cesena in northern Italy. Opened in 1454 it is significant for being the first civic library in Europe open to the general public. == Library history reports and writings of the early 19th and 20th century == In the early 19th and 20th century, representative titles were created reporting library history in the United States and the United Kingdom. American titles include Public Libraries in the United States of America, Their History, Condition, and Management (1876), Memorial History of Boston (1881) by Justin Winsor, Public Libraries in America (1894) by William I. Fletcher, and History of the New York Public Library (1923) by Henry M. Lydenberg. British titles include Old English Libraries (1911) by Earnest A. Savage and The Chained Library: A Survey of Four Centuries in the Evolution of the English Library by Burnett Hillman Streeter. In the beginning of the 20th century, library historians began applying scientific research methodologies to examine the library as a social agency. Two works that demonstrate this argument are Geschichte der Bibliotheken (1925) by Alfred Hessel and the Library Quarterly article from 1931, “The Sociological Beginnings of the Library Movement in America” by Arnold Borden. With the establishment of library schools, master's theses and doctoral dissertations represented the shift in serious research regarding libraries and library history. Two published doctoral dissertations that mark this trend are Foundations of the Public Library: The Origins of the American Public Library Movement in Ne

  Read more →
• 

  Kunstweg

  Bürgi's Kunstweg is a set of algorithms developed by Jost Bürgi in the late 16th century. They are used to calculate sines to arbitrary precision.. Bürgi used these algorithms to calculate a Canon Sinuum, a sine table in increments of 2 arc seconds. It is believed that the table featured values accurate to eight sexagesimal places. Some authors have speculated that the table only covered the range from 0° to 45°, although there is no evidence supporting this claim. Such tables were crucial for maritime navigation. Johannes Kepler described the Canon Sinuum as the most precise sine table known at the time. Bürgi explained his algorithms in his work Fundamentum Astronomiae, which he presented to Emperor Rudolf II in 1592. The Kunstweg algorithm calculates sine values iteratively. In each step, the value of a cell is the sum of the two preceding cells in the same column. The final cell's value is halved before beginning the next iteration. Ultimately, the values in the last column are normalized. Accurate sine approximations are achieved after only a few iterations. In 2015, Menso Folkerts and coworkers demonstrated that this iterative process does indeed converge toward the true sine values. According to them this was the first step towards differential calculus.

  Read more →
• 

  Snap rounding

  Snap rounding is a method of approximating line segment locations by creating a grid and placing each point in the centre of a cell (pixel) of the grid. The method preserves certain topological properties of the arrangement of line segments. Drawbacks include the potential interpolation of additional vertices in line segments (lines become polylines), the arbitrary closeness of a point to a non-incident edge, and arbitrary numbers of intersections between input line-segments. The 3 dimensional case is worse, with a polyhedral subdivision of complexity n becoming complexity O(n4). There are more refined algorithms to cope with some of these issues, for example iterated snap rounding guarantees a "large" separation between points and non-incident edges. == Algorithm == ... (please edit). See, and https://www.cgal.org/ () == Properties == Canonicity: Efficiency; A number of efficient implementations exist. Conversely there are undesirable properties: Non-idempotence: Repeated applications can cause arbitrary drift of points. Exception on "Stable snap rounding" algorithms, see https://doi.org/10.1016/j.comgeo.2012.02.011

  Read more →
• 

  ChatScript

  ChatScript is a combination Natural Language engine and dialog management system designed initially for creating chatbots, but is currently also used for various forms of NL processing. It is written in C++. The engine is an open source project at SourceForge. and GitHub. ChatScript was written by Bruce Wilcox and originally released in 2011, after Suzette (written in ChatScript) won the 2010 Loebner Prize, fooling one of four human judges. == Features == In general ChatScript aims to author extremely concisely, since the limiting scalability of hand-authored chatbots is how much/fast one can write the script. Because ChatScript is designed for interactive conversation, it automatically maintains user state across volleys. A volley is any number of sentences the user inputs at once and the chatbots response. The basic element of scripting is the rule. A rule consists of a type, a label (optional), a pattern, and an output. There are three types of rules. Gambits are something a chatbot might say when it has control of the conversation. Rejoinders are rules that respond to a user remark tied to what the chatbot just said. Responders are rules that respond to arbitrary user input which is not necessarily tied to what the chatbot just said. Patterns describe conditions under which a rule may fire. Patterns range from extremely simplistic to deeply complex (analogous to Regex but aimed for NL). Heavy use is typically made of concept sets, which are lists of words sharing a meaning. ChatScript contains some 2000 predefined concepts and scripters can easily write their own. Output of a rule intermixes literal words to be sent to the user along with common C-style programming code. Rules are bundled into collections called topics. Topics can have keywords, which allows the engine to automatically search the topic for relevant rules based on user input. == Example code == Words starting with ~ are concept sets. For example, ~fruit is the list of all known fruits. The simple pattern (~fruit) reacts if any fruit is mentioned immediately after the chatbot asks for favorite food. The slightly more complex pattern for the rule labelled WHATMUSIC requires all the words what, music, you and any word or phrase meaning to like, but they may occur in any order. Responders come in three types. ?: rules react to user questions. s: rules react to user statements. u: rules react to either. ChatScript code supports standard if-else, loops, user-defined functions and calls, and variable assignment and access. == Data == Some data in ChatScript is transient, meaning it will disappear at the end of the current volley. Other data is permanent, lasting forever until explicitly killed off. Data can be local to a single user or shared across all users at the bot level. Internally all data is represented as text and is automatically converted to a numeric form as needed. === Variables === User variables come in several kinds. Variables purely local to a topic or function are transient. Global variables can be declared as transient or permanent. A variable is generally declared merely by using it, and its type depends on its prefix ($, $$, $_). === Facts === In addition to variables, ChatScript supports facts – triples of data, which can also be transient or permanent. Functions can query for facts having particular values of some of the fields, making them act like an in-memory database. Fact retrieval is very quick and efficient the number of available in-memory facts is largely constrained to the available memory of the machine running the ChatScript engine. Facts can represent record structures and are how ChatScript represents JSON internally. Tables of information can be defined to generate appropriate facts. The above table links people to what they invented (1 per line) with Einstein getting a list of things he did. == External communication == ChatScript embeds the Curl library and can directly read and write facts in JSON to a website. == Server == A ChatScript engine can run in local or server mode. == Pos-tagging, parsing, and ontology == ChatScript comes with a copy of English WordNet embedded within, including its ontology, and creates and extends its own ontology via concept declarations. It has an English language pos-tagger and parser and supports integration with TreeTagger for pos-tagging a number of other languages (TreeTagger commercial license required). == Databases == In addition to an internal fact database, ChatScript supports PostgreSQL, MySQL, MSSQL and MongoDB both for access by scripts, but also as a central filesystem if desired so ChatScript can be scaled horizontally. A common use case is to use a centralized database to host the user files and multiple servers to scale the ChatScript engine. == JavaScript == ChatScript also embeds DukTape, ECMAScript E5/E5.1 compatibility, with some semantics updated from ES2015+. == Spelling Correction == ChatScript has built-in automatic spell checking, which can be augmented in script as both simple word replacements or context sensitive changes. With appropriate simple rules you can change perfect legal words into other words or delete them. E.g., if you have a concept of ~electronic_goods and don't want an input of Radio Shack (a store name) to be detected as an electronic good, you can get the input to change to Radio_Shack (a single word), or allow the words to remain but block the detection of the concept. This is particularly useful when combined with speech-to-text code that is imperfect, but you are familiar with common failings of it and can compensate for them in script. == Control flow == A chatbot's control flow is managed by the control script. This is merely another ordinary topic of rules, that invokes API functions of the engine. Thus control is fully configurable by the scripter (and functions exist to allow introspection into the engine). There are pre-processing control flow and post-processing control flow options available, for special processing.

  Read more →
• 

  Enterprise information system

  An Enterprise Information System (EIS) is any kind of information system which improves the functions of enterprise business processes through integration. This means typically offering high quality service, dealing with large volumes of data and capable of supporting some large and possibly complex organization or enterprise. An EIS must be able to be used by all parts and all levels of an enterprise. The word enterprise can have various connotations. Frequently the term is used only to refer to very large organizations such as multi-national companies or public-sector organizations. However, the term may be used to mean virtually anything, by virtue of it having become a corporate-speak buzzword. == Purpose == Enterprise information systems provide a technology platform that enables organizations to integrate and coordinate their business processes on a robust foundation. An EIS is currently used in conjunction with customer relationship management and supply chain management to automate business processes. An enterprise information system provides a single system that is central to the organization that ensuring information can be shared across all functional levels and management hierarchies. An EIS can be used to increase business productivity and reduce service cycles, product development cycles and marketing life cycles. It may be used to amalgamate existing applications. Other outcomes include higher operational efficiency and cost savings. Financial value is not usually a direct outcome from the implementation of an enterprise information system. == Design stage == At the design stage the main characteristic of EIS efficiency evaluation is the probability of timely delivery of various messages such as command, service, etc. == Information systems == Enterprise systems create a standard data structure and are invaluable in eliminating the problem of information fragmentation caused by multiple information systems within an organization. An EIS differentiates itself from legacy systems in that it is self-transactional, self-helping and adaptable to general and specialist conditions. Unlike an enterprise information system, legacy systems are limited to department-wide communications. A typical enterprise information system would be housed in one or more data centers, would run enterprise software, and could include applications that typically cross organizational borders such as content management systems.

  Read more →
• 

  Pointer algorithm

  In computer science, a pointer algorithm (sometimes called a pointer machine, or a reference machine; see the article Pointer machine for a close but non-identical concept) is a type of algorithm that manages a linked data structure. This concept is used as a model for lower-bound proofs and specific restrictions on the linked data structure and on the algorithm's access to the structure vary. This model has been used extensively with problems related to the disjoint-set data structure. Thus, Tarjan and La Poutré used this model to prove lower bounds on the amortized complexity of a disjoint-set data structure (La Poutré also addressed the interval split-find problem). Blum used this model to prove a lower bound on the single operation worst-case time of disjoint set data structure. Blum and Rochow proved a worst-case lower bound for the interval union-find problem. == Example == In Tarjan's lower bound for the disjoint set union problem, the assumptions on the algorithm are: The algorithm maintains a linked structure of nodes. Each element of the problem is associated with a node. Each set is represented by a node. The nodes of each set constitute a distinct connected component in the structure (this property is called separability). The find operation is performed by following links from the element node to the set node. Under these assumptions, the lower bound of Ω ( m α ( m , n ) ) {\displaystyle \Omega (m\alpha (m,n))} on the cost of a sequence of m operations is proven.

  Read more →
• 

  Virtual directory

  In computing, the term virtual directory has a couple of meanings. It may simply designate (for example in IIS) a folder which appears in a path but which is not actually a subfolder of the preceding folder in the path. However, this article will discuss the term in the context of directory services and identity management. A virtual directory or virtual directory server (VDS) in this context is a software layer that delivers a single access point for identity management applications and service platforms. A virtual directory operates as a high-performance, lightweight abstraction layer that resides between client applications and disparate types of identity-data repositories, such as proprietary and standard directories, databases, web services, and applications. A virtual directory receives queries and directs them to the appropriate data sources by abstracting and virtualizing data. The virtual directory integrates identity data from multiple heterogeneous data stores and presents it as though it were coming from one source. This ability to reach into disparate repositories makes virtual directory technology ideal for consolidating data stored in a distributed environment. As of 2011, virtual directory servers most commonly use the LDAP protocol, but more sophisticated virtual directories can also support SQL as well as DSML and SPML. Industry experts have heralded the importance of the virtual directory in modernizing the identity infrastructure. According to Dave Kearns of Network World, "Virtualization is hot and a virtual directory is the building block, or foundation, you should be looking at for your next identity management project." In addition, Gartner analyst, Bob Blakley said that virtual directories are playing an increasingly vital role. In his report, “The Emerging Architecture of Identity Management,” Blakley wrote: “In the first phase, production of identities will be separated from consumption of identities through the introduction of a virtual directory interface.” == Capabilities == Virtual directories can have some or all of the following capabilities: Aggregate identity data across sources to create a single point of access. Create high-availability for authoritative data stores. Act as identity firewall by preventing denial-of-service attacks on the primary data stores through an additional virtual layer. Support a common searchable namespace for centralized authentication. Present a unified virtual view of user information stored across multiple systems. Delegate authentication to backend sources through source-specific security means. Virtualize data sources to support migration from legacy data stores without modifying the applications that rely on them. Enrich identities with attributes pulled from multiple data stores, based on a link between user entries. Some advanced identity virtualization platforms can also: Enable application-specific, customized views of identity data without violating internal or external regulations governing identity data. Reveal contextual relationships between objects through hierarchical directory structures. Develop advanced correlation across diverse sources using correlation rules. Build a global user identity by correlating unique user accounts across various data stores, and enrich identities with attributes pulled from multiple data stores, based on a link between user entries. Enable constant data refresh for real-time updates through a persistent cache. == Advantages == Virtual directories: Enable faster deployment because users do not need to add and sync additional application-specific data sources Leverage existing identity infrastructure and security investments to deploy new services Deliver high availability of data sources Provide application-specific views of identity data which can help avoid the need to develop a master enterprise schema Allow a single view of identity data without violating internal or external regulations governing identity data Act as identity firewalls by preventing denial-of-service attacks on the primary data-stores and providing further security on access to sensitive data Can reflect changes made to authoritative sources in real-time Leverages existing update processes of authoritative sources, so no separate (sometimes manual) process to update a central directory is needed Present a unified virtual view of user information from multiple systems so that it appears to reside in a single system Can secure all backend storage locations with a single security policy == Disadvantages == An original disadvantage is public perception of "push & pull technologies" which is the general classification of "virtual directories" depending on the nature of their deployment. Virtual directories were initially designed and later deployed with "push technologies" in mind, which also contravened with privacy laws of the United States. This is no longer the case. There are, however, other disadvantages in the current technologies. The classical virtual directory based on proxy cannot modify underlying data structures or create new views based on the relationships of data from across multiple systems. So if an application requires a different structure, such as a flattened list of identities, or a deeper hierarchy for delegated administration, a virtual directory is limited. Many virtual directories cannot correlate same-users across multiple diverse sources in the case of duplicate users Virtual directories without advanced caching technologies cannot scale to heterogeneous, high-volume environments. == Sample terminology == Unify metadata: Extract schemas from the local data source, map them to a common format, and link the same identities from different data silos based on a unique identifier. Namespace joining: Create a single large directory by bringing multiple directories together at the namespace level. For instance, if one directory has the namespace "ou=internal,dc=domain,dc=com" and a second directory has the namespace "ou=external,dc=domain,dc=com," then creating a virtual directory with both namespaces is an example of namespace joining. Identity joining: Enrich identities with attributes pulled from multiple data stores, based on a link between user entries. For instance if the user joeuser exists in a directory as "cn=joeuser,ou=users" and in a database with a username of "joeuser" then the "joeuser" identity can be constructed from both the directory and the database. Data remapping: The translation of data inside of the virtual directory. For instance, mapping “uid” to “samaccountname,” so a client application that only supports a standard LDAP-compliant data source is able to search an Active Directory namespace, as well. Query routing: Route requests based on certain criteria, such as “write operations going to a master, while read operations are forwarded to replicas.” Identity routing: Virtual directories may support the routing of requests based on certain criteria (such as write operations going to a master while read operations being forwarded to replicas). Authoritative source: A "virtualized" data repository, such as a directory or database, that the virtual directory can trust for user data. Server groups: Group one or more servers containing the same data and functionality. A typical implementation is the multi-master, multi-replica environment in which replicas process "read" requests and are in one server group, while masters process "write" requests and are in another, so that servers are grouped by their response to external stimuli, even though all share the same data. == Use cases == The following are sample use cases of virtual directories: Integrating multiple directory namespaces to create a central enterprise directory. Supporting infrastructure integrations after mergers and acquisitions. Centralizing identity storage across the infrastructure, making identity information available to applications through various protocols (including LDAP, JDBC, and web services). Creating a single access point for web access management (WAM) tools. Enabling web single sign-on (SSO) across varied sources or domains. Supporting role-based, fine-grained authorization policies Enabling authentication across different security domains using each domain’s specific credential checking method. Improving secure access to information both inside and outside of the firewall.

  Read more →
• 

  NRD Cyber Security

  NRD Cyber Security is a Lithuanian company that provides cybersecurity solutions, consulting, and other services. The organization specializes in CSIRT and SOC creation, modernization and training. It has helped to establish national and sectorial CSIRTs around the world, including countries, such as Bangladesh, Egypt, Bhutan, Kosovo, Malawi and others. NRD Cyber Security was found in 2013 to provide quality cybersecurity services to nations and organizations. In 2018 it was included in The Deloitte Technology Fast 50 in Europe list. In 2024 it was awarded the #98 place in MSSP Alert Top 250 world's managed security service providers. The company is a member of various cybersecurity organizations, such as Forum of Incident Response and Security Teams (FIRST), The Global Forum on Cyber Expertise (GFCE), Unicrons Lt. It is a strategic partner of The Global Cyber Security Capacity Centre (GCSCC) at University of Oxford.

  Read more →
• 

  Generalized distributive law

  The generalized distributive law (GDL) is a generalization of the distributive property which gives rise to a general message passing algorithm. It is a synthesis of the work of many authors in the information theory, digital communications, signal processing, statistics, and artificial intelligence communities. The law and algorithm were introduced in a semi-tutorial by Srinivas M. Aji and Robert J. McEliece with the same title. == Introduction == "The distributive law in mathematics is the law relating the operations of multiplication and addition, stated symbolically, a ∗ ( b + c ) = a ∗ b + a ∗ c {\displaystyle a(b+c)=ab+ac} ; that is, the monomial factor a {\displaystyle a} is distributed, or separately applied, to each term of the binomial factor b + c {\displaystyle b+c} , resulting in the product a ∗ b + a ∗ c {\displaystyle ab+ac} " – Britannica. As it can be observed from the definition, application of distributive law to an arithmetic expression reduces the number of operations in it. In the previous example the total number of operations reduced from three (two multiplications and an addition in a ∗ b + a ∗ c {\displaystyle ab+ac} ) to two (one multiplication and one addition in a ∗ ( b + c ) {\displaystyle a(b+c)} ). Generalization of distributive law leads to a large family of fast algorithms. This includes the FFT and Viterbi algorithm. This is explained in a more formal way in the example below: α ( a , b ) = d e f ∑ c , d , e ∈ A f ( a , c , b ) g ( a , d , e ) {\displaystyle \alpha (a,\,b){\stackrel {\mathrm {def} }{=}}\displaystyle \sum \limits _{c,d,e\in A}f(a,\,c,\,b)\,g(a,\,d,\,e)} where f ( ⋅ ) {\displaystyle f(\cdot )} and g ( ⋅ ) {\displaystyle g(\cdot )} are real-valued functions, a , b , c , d , e ∈ A {\displaystyle a,b,c,d,e\in A} and | A | = q {\displaystyle |A|=q} (say) Here we are "marginalizing out" the independent variables ( c {\displaystyle c} , d {\displaystyle d} , and e {\displaystyle e} ) to obtain the result. When we are calculating the computational complexity, we can see that for each q 2 {\displaystyle q^{2}} pairs of ( a , b ) {\displaystyle (a,b)} , there are q 3 {\displaystyle q^{3}} terms due to the triplet ( c , d , e ) {\displaystyle (c,d,e)} which needs to take part in the evaluation of α ( a , b ) {\displaystyle \alpha (a,\,b)} with each step having one addition and one multiplication. Therefore, the total number of computations needed is 2 ⋅ q 2 ⋅ q 3 = 2 q 5 {\displaystyle 2\cdot q^{2}\cdot q^{3}=2q^{5}} . Hence the asymptotic complexity of the above function is O ( n 5 ) {\displaystyle O(n^{5})} . If we apply the distributive law to the RHS of the equation, we get the following: α ( a , b ) = d e f ∑ c ∈ A f ( a , c , b ) ⋅ ∑ d , e ∈ A g ( a , d , e ) {\displaystyle \alpha (a,\,b){\stackrel {\mathrm {def} }{=}}\displaystyle \sum \limits _{c\in A}f(a,\,c,\,b)\cdot \sum _{d,\,e\in A}g(a,\,d,\,e)} This implies that α ( a , b ) {\displaystyle \alpha (a,\,b)} can be described as a product α 1 ( a , b ) ⋅ α 2 ( a ) {\displaystyle \alpha _{1}(a,\,b)\cdot \alpha _{2}(a)} where α 1 ( a , b ) = d e f ∑ c ∈ A f ( a , c , b ) {\displaystyle \alpha _{1}(a,b){\stackrel {\mathrm {def} }{=}}\displaystyle \sum \limits _{c\in A}f(a,\,c,\,b)} and α 2 ( a ) = d e f ∑ d , e ∈ A g ( a , d , e ) {\displaystyle \alpha _{2}(a){\stackrel {\mathrm {def} }{=}}\displaystyle \sum \limits _{d,\,e\in A}g(a,\,d,\,e)} Now, when we are calculating the computational complexity, we can see that there are q 3 {\displaystyle q^{3}} additions in α 1 ( a , b ) {\displaystyle \alpha _{1}(a,\,b)} and α 2 ( a ) {\displaystyle \alpha _{2}(a)} each and there are q 2 {\displaystyle q^{2}} multiplications when we are using the product α 1 ( a , b ) ⋅ α 2 ( a ) {\displaystyle \alpha _{1}(a,\,b)\cdot \alpha _{2}(a)} to evaluate α ( a , b ) {\displaystyle \alpha (a,\,b)} . Therefore, the total number of computations needed is q 3 + q 3 + q 2 = 2 q 3 + q 2 {\displaystyle q^{3}+q^{3}+q^{2}=2q^{3}+q^{2}} . Hence the asymptotic complexity of calculating α ( a , b ) {\displaystyle \alpha (a,b)} reduces to O ( n 3 ) {\displaystyle O(n^{3})} from O ( n 5 ) {\displaystyle O(n^{5})} . This shows by an example that applying distributive law reduces the computational complexity which is one of the good features of a "fast algorithm". == History == Some of the problems that used distributive law to solve can be grouped as follows: Decoding algorithms: A GDL like algorithm was used by Gallager's for decoding low density parity-check codes. Based on Gallager's work Tanner introduced the Tanner graph and expressed Gallagers work in message passing form. The tanners graph also helped explain the Viterbi algorithm. It is observed by Forney that Viterbi's maximum likelihood decoding of convolutional codes also used algorithms of GDL-like generality. Forward–backward algorithm: The forward backward algorithm helped as an algorithm for tracking the states in the Markov chain. And this also was used the algorithm of GDL like generality Artificial intelligence: The notion of junction trees has been used to solve many problems in AI. Also the concept of bucket elimination used many of the concepts. == The MPF problem == MPF or marginalize a product function is a general computational problem which as special case includes many classical problems such as computation of discrete Hadamard transform, maximum likelihood decoding of a linear code over a memory-less channel, and matrix chain multiplication. The power of the GDL lies in the fact that it applies to situations in which additions and multiplications are generalized. A commutative semiring is a good framework for explaining this behavior. It is defined over a set K {\displaystyle K} with operators " + {\displaystyle +} " and " . {\displaystyle .} " where ( K , + ) {\displaystyle (K,\,+)} and ( K , . ) {\displaystyle (K,\,.)} are a commutative monoids and the distributive law holds. Let p 1 , … , p n {\displaystyle p_{1},\ldots ,p_{n}} be variables such that p 1 ∈ A 1 , … , p n ∈ A n {\displaystyle p_{1}\in A_{1},\ldots ,p_{n}\in A_{n}} where A {\displaystyle A} is a finite set and | A i | = q i {\displaystyle |A_{i}|=q_{i}} . Here i = 1 , … , n {\displaystyle i=1,\ldots ,n} . If S = { i 1 , … , i r } {\displaystyle S=\{i_{1},\ldots ,i_{r}\}} and S ⊂ { 1 , … , n } {\displaystyle S\,\subset \{1,\ldots ,n\}} , let A S = A i 1 × ⋯ × A i r {\displaystyle A_{S}=A_{i_{1}}\times \cdots \times A_{i_{r}}} , p S = ( p i 1 , … , p i r ) {\displaystyle p_{S}=(p_{i_{1}},\ldots ,p_{i_{r}})} , q S = | A S | {\displaystyle q_{S}=|A_{S}|} , A = A 1 × ⋯ × A n {\displaystyle \mathbf {A} =A_{1}\times \cdots \times A_{n}} , and p = { p 1 , … , p n } {\displaystyle \mathbf {p} =\{p_{1},\ldots ,p_{n}\}} Let S = { S j } j = 1 M {\displaystyle S=\{S_{j}\}_{j=1}^{M}} where S j ⊂ { 1 , . . . , n } {\displaystyle S_{j}\subset \{1,...\,,n\}} . Suppose a function is defined as α i : A S i → R {\displaystyle \alpha _{i}:A_{S_{i}}\rightarrow R} , where R {\displaystyle R} is a commutative semiring. Also, p S i {\displaystyle p_{S_{i}}} are named the local domains and α i {\displaystyle \alpha _{i}} as the local kernels. Now the global kernel β : A → R {\displaystyle \beta :\mathbf {A} \rightarrow R} is defined as: β ( p 1 , . . . , p n ) = ∏ i = 1 M α ( p S i ) {\displaystyle \beta (p_{1},...\,,p_{n})=\prod _{i=1}^{M}\alpha (p_{S_{i}})} Definition of MPF problem: For one or more indices i = 1 , . . . , M {\displaystyle i=1,...\,,M} , compute a table of the values of S i {\displaystyle S_{i}} -marginalization of the global kernel β {\displaystyle \beta } , which is the function β i : A S i → R {\displaystyle \beta _{i}:A_{S_{i}}\rightarrow R} defined as β i ( p S i ) = ∑ p S i c ∈ A S i c β ( p ) {\displaystyle \beta _{i}(p_{S_{i}})\,=\displaystyle \sum \limits _{p_{S_{i}^{c}}\in A_{S_{i}^{c}}}\beta (p)} Here S i c {\displaystyle S_{i}^{c}} is the complement of S i {\displaystyle S_{i}} with respect to { 1 , . . . , n } {\displaystyle \mathbf {\{} 1,...\,,n\}} and the β i ( p S i ) {\displaystyle \beta _{i}(p_{S_{i}})} is called the i t h {\displaystyle i^{th}} objective function, or the objective function at S i {\displaystyle S_{i}} . It can observed that the computation of the i t h {\displaystyle i^{th}} objective function in the obvious way needs M q 1 q 2 q 3 ⋯ q n {\displaystyle Mq_{1}q_{2}q_{3}\cdots q_{n}} operations. This is because there are q 1 q 2 ⋯ q n {\displaystyle q_{1}q_{2}\cdots q_{n}} additions and ( M − 1 ) q 1 q 2 . . . q n {\displaystyle (M-1)q_{1}q_{2}...q_{n}} multiplications needed in the computation of the i th {\displaystyle i^{\text{th}}} objective function. The GDL algorithm which is explained in the next section can reduce this computational complexity. The following is an example of the MPF problem. Let p 1 , p 2 , p 3 , p 4 , {\displaystyle p_{1},\,p_{2},\,p_{3},\,p_{4},} and p 5 {\displaystyle p_{5}} be variables such that p 1 ∈ A 1 , p 2 ∈ A 2 , p 3 ∈ A 3 , p 4 ∈ A 4 , {\displaystyle p_{1}\in

  Read more →
• 

  TurboQuant

  TurboQuant is an online vector quantization algorithm for compressing high-dimensional Euclidean vectors while preserving their geometric structure. It was proposed in 2025 by Amir Zandieh, Majid Daliri, Majid Hadian, and Vahab Mirrokni in the paper TurboQuant: Online Vector Quantization with Near-optimal Distortion Rate. The paper lists Zandieh and Mirrokni as affiliated with Google Research, Daliri with New York University, and Hadian with Google DeepMind. The method was developed for applications including large language model (LLM) inference, key–value (KV) cache compression, vector databases, and nearest neighbor search. TurboQuant consists of two related algorithms: TurboQuantmse, which is optimized for mean squared error (MSE), and TurboQuantprod, which is optimized for unbiased inner product estimation. The algorithm uses a random rotation of input vectors, applies scalar quantizers to the rotated coordinates, and, for inner-product estimation, applies a one-bit Quantized Johnson–Lindenstrauss (QJL) transform to the residual error. == Background == Vector quantization is a compression method that maps high-dimensional vectors to a finite set of codewords. The problem has roots in Shannon's source coding theory and rate–distortion theory. In machine learning and information retrieval, vector quantization is used to reduce the memory required to store embeddings, activation vectors, and other numerical representations. In Transformer-based large language models, the KV cache stores key and value vectors from previous tokens during autoregressive decoding. The size of this cache grows with context length, the number of attention heads, and the number of concurrent requests, making it a major memory bottleneck in LLM serving. Similar compression problems appear in vector search, where large collections of embedding vectors must be stored and searched efficiently. Earlier approaches to vector quantization include product quantization, scalar quantization, and data-dependent k-means codebook construction. The TurboQuant paper argues that many existing methods either require offline preprocessing and calibration or suffer from suboptimal distortion guarantees in online settings. == Algorithm == === TurboQuantmse === TurboQuantmse is the version of the algorithm optimized for mean-squared error. For a unit vector x ∈ S d − 1 {\displaystyle x\in S^{d-1}} , the algorithm first applies a random rotation matrix Π ∈ R d × d {\displaystyle \Pi \in \mathbb {R} ^{d\times d}} and sets z = Π x {\displaystyle z=\Pi x} . Each coordinate of the rotated vector follows a shifted and scaled beta distribution, which converges to a normal distribution in high dimensions. In high dimensions, distinct coordinates also become nearly independent, allowing the algorithm to apply scalar quantizers independently to each coordinate. The scalar quantizer is constructed by solving a one-dimensional continuous k-means or Lloyd–Max quantization problem. If the centroids are c 1 , c 2 , … , c 2 b {\displaystyle c_{1},c_{2},\ldots ,c_{2^{b}}} , the quantization step stores, for each coordinate, i d x j = ⁡ a r g m i n k ∈ [ 2 b ] | z j − c k | . {\displaystyle \mathrm {idx} _{j}=\operatorname {} {arg\,min}_{k\in [2^{b}]}|z_{j}-c_{k}|.} During dequantization, the stored index for each coordinate is replaced by the corresponding centroid, giving a reconstructed rotated vector z ~ {\displaystyle {\tilde {z}}} . The algorithm then rotates back: x ~ = Π ⊤ z ~ . {\displaystyle {\tilde {x}}=\Pi ^{\top }{\tilde {z}}.} The paper gives the following bound for TurboQuantmse: D m s e ≤ 3 π 2 ⋅ 1 4 b . {\displaystyle D_{\mathrm {mse} }\leq {\frac {\sqrt {3\pi }}{2}}\cdot {\frac {1}{4^{b}}}.} It also reports finer-grained MSE values of approximately 0.36, 0.117, 0.03, and 0.009 for bit-widths b = 1 , 2 , 3 , 4 {\displaystyle b=1,2,3,4} , respectively. === TurboQuantprod === TurboQuantprod is optimized for unbiased inner-product estimation. The authors note that an MSE-optimized quantizer may introduce bias when used to estimate inner products. To address this, TurboQuantprod first applies TurboQuantmse with bit-width b − 1 {\displaystyle b-1} , then applies a one-bit Quantized Johnson–Lindenstrauss transform to the remaining residual vector. Let r = x − Q m s e − 1 ( Q m s e ( x ) ) {\displaystyle r=x-Q_{\mathrm {mse} }^{-1}(Q_{\mathrm {mse} }(x))} be the residual after MSE quantization, and let γ = ‖ r ‖ 2 {\displaystyle \gamma =\|r\|_{2}} . The QJL step stores a sign vector for the residual. For γ ≠ 0 {\displaystyle \gamma \neq 0} , this can be written using the normalized residual u = r / γ {\displaystyle u=r/\gamma } : q j l = sign ⁡ ( S u ) , {\displaystyle qjl=\operatorname {sign} (Su),} where S ∈ R d × d {\displaystyle S\in \mathbb {R} ^{d\times d}} is a random projection matrix. Since the sign function is invariant under positive rescaling, this is equivalent to sign ⁡ ( S r ) {\displaystyle \operatorname {sign} (Sr)} when r ≠ 0 {\displaystyle r\neq 0} . If γ = 0 {\displaystyle \gamma =0} , the residual correction is zero. TurboQuantprod stores the MSE quantization, the QJL sign vector, and the residual norm: Q p r o d ( x ) = [ Q m s e ( x ) , q j l , γ ] . {\displaystyle Q_{\mathrm {prod} }(x)=\left[Q_{\mathrm {mse} }(x),qjl,\gamma \right].} The dequantized vector is reconstructed as x ~ = x ~ m s e + π / 2 d γ S ⊤ q j l . {\displaystyle {\tilde {x}}={\tilde {x}}_{\mathrm {mse} }+{\frac {\sqrt {\pi /2}}{d}}\,\gamma S^{\top }qjl.} The paper proves that TurboQuantprod is unbiased for inner-product estimation: E x ~ [ ⟨ y , x ~ ⟩ ] = ⟨ y , x ⟩ . {\displaystyle \mathbb {E} _{\tilde {x}}\left[\langle y,{\tilde {x}}\rangle \right]=\langle y,x\rangle .} It also gives the distortion bound D p r o d ≤ 3 π 2 ⋅ ‖ y ‖ 2 2 d ⋅ 1 4 b . {\displaystyle D_{\mathrm {prod} }\leq {\frac {\sqrt {3\pi }}{2}}\cdot {\frac {\|y\|_{2}^{2}}{d}}\cdot {\frac {1}{4^{b}}}.} == Performance and applications == The TurboQuant paper reports that the algorithm achieves near-optimal distortion rates within a small constant factor of information-theoretic lower bounds. The authors report that, for KV cache quantization, TurboQuant achieved quality neutrality at 3.5 bits per channel and marginal degradation at 2.5 bits per channel. In long-context LLM experiments using Llama 3.1 8B Instruct, the paper evaluated the method on a "needle-in-a-haystack" retrieval task with document lengths from 4,000 to 104,000 tokens. It reported that TurboQuant matched the uncompressed full-precision baseline while using more than 4× compression, and compared the method against PolarQuant, SnapKV, PyramidKV, and KIVI. Google Research stated that TurboQuant was evaluated on long-context benchmarks including LongBench, Needle in a Haystack, ZeroSCROLLS, RULER, and L-Eval using open-source models including Gemma and Mistral. According to a report in Tom's Hardware, Google described the method as reducing KV-cache memory by at least six times and achieving up to an eightfold improvement in attention-logit computation on Nvidia H100 GPUs compared with unquantized 32-bit keys. TurboQuant has also been applied to nearest-neighbor vector search. The original paper reports experiments on DBpedia entity embeddings and GloVe embeddings, comparing TurboQuant with product quantization and other vector-search quantization baselines. == Relationship to other methods == TurboQuant is related to several methods for efficient large language model inference and high-dimensional search: Product quantization – a vector quantization technique widely used for approximate nearest-neighbor search Quantization (machine learning) – reducing the numerical precision of weights, activations, or cached tensors in machine learning models PagedAttention – a memory-management algorithm for LLM serving that reduces fragmentation in the KV cache Johnson–Lindenstrauss lemma – a result in high-dimensional geometry used in random projection methods Lloyd's algorithm – an algorithm for scalar and vector quantization, including k-means-style codebook construction Unlike PagedAttention, which focuses on memory allocation and cache layout, TurboQuant reduces the numerical storage cost of the vectors themselves. Unlike many product-quantization methods, TurboQuant is designed to be data-oblivious and online, avoiding dataset-specific codebook training. == Limitations == The strongest performance claims for TurboQuant come from the original paper and Google Research's own publication. Coverage in technology media has noted that the broader impact of the method will depend on real-world implementation details, workloads, and hardware architectures.

  Read more →
• 

  Wearable technology

  Wearable technology is a category of small electronic and mobile devices with wireless communications capability designed to be worn on the human body and are incorporated into gadgets, accessories, or clothes. Common types of wearable technology include smartwatches, fitness trackers, and smartglasses. Wearable electronic devices are often close to or on the surface of the skin, where they detect, analyze, and transmit information such as vital signs, and/or ambient data and which allow in some cases immediate biofeedback to the wearer. Wearable devices collect vast amounts of data from users making use of different behavioral and physiological sensors, which monitor their health status and activity levels. Wrist-worn devices include smartwatches with a touchscreen display, while wristbands are mainly used for fitness tracking but do not contain a touchscreen display. Wearable devices such as activity trackers are an example of the Internet of things, since "things" such as electronics, software, sensors, and connectivity are effectors that enable objects to exchange data (including data quality) through the internet with a manufacturer, operator, and/or other connected devices, without requiring human intervention. Wearable technology offers a wide range of possible uses, from communication and entertainment to improving health and fitness, however, there are worries about privacy and security because wearable devices have the ability to collect personal data. Wearable technology has a variety of use cases which is growing as the technology is developed and the market expands. It can be used to encourage individuals to be more active and improve their lifestyle choices. Healthy behavior is encouraged by tracking activity levels and providing useful feedback to enable goal setting. This can be shared with interested stakeholders such as healthcare providers. Wearables are popular in consumer electronics, most commonly in the form factors of smartwatches, smart rings, and implants. Apart from commercial uses, wearable technology is being incorporated into navigation systems, advanced textiles (e-textiles), and healthcare. As wearable technology is being proposed for use in critical applications, like other technology, it is vetted for its reliability and security properties. == History == In the 1500s, German inventor Peter Henlein (1485–1542) created small watches that were worn as necklaces. A century later, pocket watches grew in popularity as waistcoats became fashionable for men. Wristwatches were created in the late 1600s but were worn mostly by women as bracelets. Pedometers were developed around the same time as pocket watches. The concept of a pedometer was described by Leonardo da Vinci around 1500, and the Germanic National Museum in Nuremberg has a pedometer in its collection from 1590. In the late 1800s, the first wearable hearing aids were introduced. In 1904, aviator Alberto Santos-Dumont pioneered the modern use of the wristwatch. In 1949, American biophysicist Norman Holter invented the very first health monitoring device. His invention, the Holter monitor, was groundbreaking as one of the first wearable devices capable of tracking vital health data outside of a clinical setting. In the 1970s, calculator watches became available, reaching the peak of their popularity in the 1980s. From the early 2000s, wearable cameras were being used as part of a growing sousveillance movement. Expectations, operations, usage and concerns about wearable technology was floated on the first International Conference on Wearable Computing. In 2008, Ilya Fridman incorporated a hidden Bluetooth microphone into a pair of earrings. Big tech companies such as Apple, Samsung, and Fitbit have expanded on this idea by interfacing with smartphones and personal computer software to collect a wide variety of data. Wearable devices include dedicated health monitors, fitness bands, and smartwatches. In 2010, Fitbit released its first step counter. Wearable technology which tracks information such as walking and heart rate is part of the quantified self movement. In 2013, McLear, also known as NFC Ring, released a "smart ring". The smart ring could make bitcoin payments, unlock other devices, and transfer personally identifying information, and also had other features. In 2013, one of the first widely available smartwatches was the Samsung Galaxy Gear. Apple followed in 2015 with the Apple Watch. === Prototypes === From 1991 to 1997, Rosalind Picard and her students, Steve Mann and Jennifer Healey, at the MIT Media Lab designed, built, and demonstrated data collection and decision making from "Smart Clothes" that monitored continuous physiological data from the wearer. These "smart clothes", "smart underwear", "smart shoes", and smart jewellery collected data that related to affective state and contained or controlled physiological sensors and environmental sensors like cameras and other devices. At the same time, also at the MIT Media Lab, Thad Starner and Alex "Sandy" Pentland develop augmented reality. In 1997, their smartglass prototype is featured on 60 Minutes and enables rapid web search and instant messaging. Though the prototype's glasses are nearly as streamlined as modern smartglasses, the processor was a computer worn in a backpack – the most lightweight solution available at the time. In 2009, Sony Ericsson teamed up with the London College of Fashion for a contest to design digital clothing. The winner was a cocktail dress with Bluetooth technology making it light up when a call is received. Zach "Hoeken" Smith of MakerBot fame made keyboard pants during a "Fashion Hacking" workshop at a New York City creative collective. The Tyndall National Institute in Ireland developed a "remote non-intrusive patient monitoring" platform which was used to evaluate the quality of the data generated by the patient sensors and how the end users may adopt to the technology. More recently, London-based fashion company CuteCircuit created costumes for singer Katy Perry featuring LED lighting so that the outfits would change color both during stage shows and appearances on the red carpet such as the dress Katy Perry wore in 2010 at the MET Gala in NYC. In 2012, CuteCircuit created the world's first dress to feature Tweets, as worn by singer Nicole Scherzinger. In 2010, McLear, also known as NFC Ring, developed prototypes of its "smart ring" devices, before a Kickstarter fundraising in 2013. In 2014, graduate students from the Tisch School of Arts in New York designed a hoodie that sent pre-programmed text messages triggered by gesture movements. Around the same time, prototypes for digital eyewear with heads up display (HUD) began to appear. The US military employs headgear with displays for soldiers using a technology called holographic optics. In 2010, Google started developing prototypes of its optical head-mounted display Google Glass, which went into customer beta in March 2013. == Usage == In the consumer space, sales of smart wristbands (aka activity trackers such as the Jawbone UP and Fitbit Flex) started accelerating in 2013. One in five American adults have a wearable device, according to the 2014 PriceWaterhouseCoopers Wearable Future Report. As of 2009, decreasing cost of processing power and other components was facilitating widespread adoption and availability. In professional sports, wearable technology has applications in monitoring and real-time feedback for athletes. Examples of wearable technology in sport include accelerometers, pedometers, and GPS's which can be used to measure an athlete's energy expenditure and movement pattern. In cybersecurity and financial technology, secure wearable devices have captured part of the physical security key market. McLear, also known as NFC Ring, and VivoKey developed products with one-time pass secure access control. In health informatics, wearable devices have enabled better capturing of human health statistics for data driven analysis. This has facilitated data-driven machine learning algorithms to analyse the health condition of users. In business, wearable technology helps managers easily supervise employees by knowing their locations and what they are currently doing. Employees working in a warehouse also have increased safety when working around chemicals or lifting something. Smart helmets are employee safety wearables that have vibration sensors that can alert employees of possible danger in their environment. == Wearable technology and health == Wearable technology is often used to monitor a user's health. Given that such a device is in close contact with the user, it can easily collect data. It started as soon as 1980 where first wireless ECG was invented. In the last decades, there has been substantial growth in research of e.g. textile-based, tattoo, patch, and contact lenses as well as circulation of a notion of "quantified self", transhumanism-related ideas, and growth of life ex

  Read more →
• 

  Landweber iteration

  The Landweber iteration or Landweber algorithm is an algorithm to solve ill-posed linear inverse problems, and it has been extended to solve non-linear problems that involve constraints. The method was first proposed in the 1950s by Louis Landweber, and it can be now viewed as a special case of many other more general methods. == Basic algorithm == The original Landweber algorithm attempts to recover a signal x from (noisy) measurements y. The linear version assumes that y = A x {\displaystyle y=Ax} for a linear operator A. When the problem is in finite dimensions, A is just a matrix. When A is nonsingular, then an explicit solution is x = A − 1 y {\displaystyle x=A^{-1}y} . However, if A is ill-conditioned, the explicit solution is a poor choice since it is sensitive to any noise in the data y. If A is singular, this explicit solution doesn't even exist. The Landweber algorithm is an attempt to regularize the problem, and is one of the alternatives to Tikhonov regularization. We may view the Landweber algorithm as solving: min x ‖ A x − y ‖ 2 2 / 2 {\displaystyle \min _{x}\|Ax-y\|_{2}^{2}/2} using an iterative method. The algorithm is given by the update x k + 1 = x k − ω A ∗ ( A x k − y ) . {\displaystyle x_{k+1}=x_{k}-\omega A^{}(Ax_{k}-y).} where the relaxation factor ω {\displaystyle \omega } satisfies 0 < ω < 2 / σ 1 2 {\displaystyle 0<\omega <2/\sigma _{1}^{2}} . Here σ 1 {\displaystyle \sigma _{1}} is the largest singular value of A {\displaystyle A} . If we write f ( x ) = ‖ A x − y ‖ 2 2 / 2 {\displaystyle f(x)=\|Ax-y\|_{2}^{2}/2} , then the update can be written in terms of the gradient x k + 1 = x k − ω ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\omega \nabla f(x_{k})} and hence the algorithm is a special case of gradient descent. For ill-posed problems, the iterative method needs to be stopped at a suitable iteration index, because it semi-converges. This means that the iterates approach a regularized solution during the first iterations, but become unstable in further iterations. The reciprocal of the iteration index 1 / k {\displaystyle 1/k} acts as a regularization parameter. A suitable parameter is found, when the mismatch ‖ A x k − y ‖ 2 2 {\displaystyle \|Ax_{k}-y\|_{2}^{2}} approaches the noise level. Using the Landweber iteration as a regularization algorithm has been discussed in the literature. == Nonlinear extension == In general, the updates generated by x k + 1 = x k − τ ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\tau \nabla f(x_{k})} will generate a sequence f ( x k ) {\displaystyle f(x_{k})} that converges to a minimizer of f whenever f is convex and the stepsize τ {\displaystyle \tau } is chosen such that 0 < τ < 2 / ( ‖ ∇ f ‖ 2 ) {\displaystyle 0<\tau <2/(\|\nabla f\|^{2})} where ‖ ⋅ ‖ {\displaystyle \|\cdot \|} is the spectral norm. Since this is special type of gradient descent, there currently is not much benefit to analyzing it on its own as the nonlinear Landweber, but such analysis was performed historically by many communities not aware of unifying frameworks. The nonlinear Landweber problem has been studied in many papers in many communities; see, for example. == Extension to constrained problems == If f is a convex function and C is a convex set, then the problem min x ∈ C f ( x ) {\displaystyle \min _{x\in C}f(x)} can be solved by the constrained, nonlinear Landweber iteration, given by: x k + 1 = P C ( x k − τ ∇ f ( x k ) ) {\displaystyle x_{k+1}={\mathcal {P}}_{C}(x_{k}-\tau \nabla f(x_{k}))} where P {\displaystyle {\mathcal {P}}} is the projection onto the set C. Convergence is guaranteed when 0 < τ < 2 / ( ‖ A ‖ 2 ) {\displaystyle 0<\tau <2/(\|A\|^{2})} . This is again a special case of projected gradient descent (which is a special case of the forward–backward algorithm) as discussed in. == Applications == Since the method has been around since the 1950s, it has been adopted and rediscovered by many scientific communities, especially those studying ill-posed problems. In X-ray computed tomography it is called simultaneous iterative reconstruction technique (SIRT). It has also been used in the computer vision community and the signal restoration community. It is also used in image processing, since many image problems, such as deconvolution, are ill-posed. Variants of this method have been used also in sparse approximation problems and compressed sensing settings.

  Read more →
• 

  Wiki survey

  Wiki surveys or wikisurveys are a software-based survey method that crowdsource discussions and help participants to find areas of agreement. Other names include bridging systems and collective response systems. The approach, inspired by Wikipedia, is to open up surveys where participants can shape the questions, instead of traditional 'closed' surveys where participants can only respond to the questions asked. Wiki surveys have been used for purposes including facilitating deliberative democracy, crowdsourcing opinions from experts and figuring out common beliefs on a given topic. A notable usage of wiki surveys is in Taiwan's government system, where citizens can participate in crowdsourced lawmaking through Pol.is wiki surveys. == Implementations == === All Our Ideas === All Our Ideas founders coined the term "wiki survey," explaining how they took inspiration from the organic evolution of Wikipedia and hoped to create something similar for surveys. They hosted 5000 surveys between 2010 and 2014. A 2020 survey using the tool found 3 of its top 10 findings were user-generated. === Decidim === Decidim has been used by governments throughout Spain and Europe to help with participatory budgeting and other public policy decisions. === Polis === Polis (also known as Pol.is) was developed in 2012. The focus of Polis is to project participants into an 'opinion space' where they can see how their voting behavior compares to other participants. The opinion space clusters participants into groups of similar opinion and is designed in a way to avoid tyranny of the majority by being able to include groups that have small numbers of participants. The questions participants are presented with are agree/disagree/pass on a single 'comment' submitted by a participant. The code for Polis is free and open-source software under the GNU AGPL. === Remesh === Remesh was founded in 2013 and has partnered with the United Nations and Alliance for Middle East Peace efforts to bring peaceful resolutions to conflicts. Participants are anonymous and the algorithm can be fine-tuned to better understand local dialects in specific regions. == Examples == PlaNYC used All Our Ideas to gather ideas on how to establish New York City's sustainability plan vTaiwan, a citizen-lead government process in Taiwan, uses Polis for enabling large amounts of citizens to deliberate and consequently provide input on Taiwan's legislative decisions OECD used All Our Ideas to gather ideas from the public prior to meeting for a forum and meeting on which skills are most important to invest in for the 21st century March On, an offshoot of the Women's March Movement, used Polis to understand the opinions of people wanting to support the movement Residents of Harrogate use Polis to debate issues in their community, with the results being released publicly to everyone == Characteristics == Wiki surveys often have these three characteristics: === Collaborativeness === Wiki surveys allow participants to contribute questions, as well as answer questions created by its participants. === Adaptivity === Wiki surveys adapt to elicit the most useful information from its participants. One example involves changing the ordering of questions based on the voting behavior of previous participants so as to maximize consensus. The heuristic determining the ordering of questions highly values showing the comments that have been voted on the least. === 'Greediness' === In the context of wiki surveys, 'greediness' simply means making full use of information that participants are willing to provide. Wiki surveys do not require participants to answer a fixed amount of questions, so participants can answer as little or as much as they want. This is intended to be more efficient in capturing participants' preferences by allowing more organic sharing of their perspectives. == Traditional survey methods vs. wiki surveys == Questions in traditional survey methods fall into two categories: Open and closed questions. Open questions ask the person taking the survey to write an open response while closed questions give a fixed set of responses to select from. Wiki surveys are like a hybrid of the two, enabling insightful consensus in certain situations where traditional survey methods may lack. Closed questions are easy to analyze quantitively, but the limited options to select from for a given question may cause bias. Open questions are not as subject to bias, but are difficult to analyze quantitatively at scale. Wiki surveys allow for open responses by the users' contribution of survey questions (also called 'items'), and uses machine learning techniques to (at least partially) automate the quantitative analysis of the responses to those questions.

  Read more →
• 

  Kleene's algorithm

  In theoretical computer science, in particular in formal language theory, Kleene's algorithm transforms a given nondeterministic finite automaton (NFA) into a regular expression. Together with other conversion algorithms, it establishes the equivalence of several description formats for regular languages. Alternative presentations of the same method include the "elimination method" attributed to Brzozowski and McCluskey, the algorithm of McNaughton and Yamada, and the use of Arden's lemma. == Algorithm description == According to Gross and Yellen (2004), the algorithm can be traced back to Kleene (1956). A presentation of the algorithm in the case of deterministic finite automata (DFAs) is given in Hopcroft and Ullman (1979). The presentation of the algorithm for NFAs below follows Gross and Yellen (2004). Given a nondeterministic finite automaton M = (Q, Σ, δ, q0, F), with Q = { q0,...,qn } its set of states, the algorithm computes the sets Rkij of all strings that take M from state qi to qj without going through any state numbered higher than k. Here, "going through a state" means entering and leaving it, so both i and j may be higher than k, but no intermediate state may. Each set Rkij is represented by a regular expression; the algorithm computes them step by step for k = -1, 0, ..., n. Since there is no state numbered higher than n, the regular expression Rn0j represents the set of all strings that take M from its start state q0 to qj. If F = { q1,...,qf } is the set of accept states, the regular expression Rn01 | ... | Rn0f represents the language accepted by M. The initial regular expressions, for k = -1, are computed as follows for i≠j: R−1ij = a1 | ... | am where qj ∈ δ(qi,a1), ..., qj ∈ δ(qi,am) and as follows for i=j: R−1ii = a1 | ... | am | ε where qi ∈ δ(qi,a1), ..., qi ∈ δ(qi,am) In other words, R−1ij mentions all letters that label a transition from i to j, and we also include ε in the case where i=j. After that, in each step the expressions Rkij are computed from the previous ones by Rkij = Rk-1ik (Rk-1kk) Rk-1kj | Rk-1ij Another way to understand the operation of the algorithm is as an "elimination method", where the states from 0 to n are successively removed: when state k is removed, the regular expression Rk-1ij, which describes the words that label a path from state i>k to state j>k, is rewritten into Rkij so as to take into account the possibility of going via the "eliminated" state k. By induction on k, it can be shown that the length of each expression Rkij is at most ⁠1/3⁠(4k+1(6s+7) - 4) symbols, where s denotes the number of characters in Σ. Therefore, the length of the regular expression representing the language accepted by M is at most ⁠1/3⁠(4n+1(6s+7)f - f - 3) symbols, where f denotes the number of final states. This exponential blowup is inevitable, because there exist families of DFAs for which any equivalent regular expression must be of exponential size. In practice, the size of the regular expression obtained by running the algorithm can be very different depending on the order in which the states are considered by the procedure, i.e., the order in which they are numbered from 0 to n. == Example == The automaton shown in the picture can be described as M = (Q, Σ, δ, q0, F) with the set of states Q = { q0, q1, q2 }, the input alphabet Σ = { a, b }, the transition function δ with δ(q0,a)=q0, δ(q0,b)=q1, δ(q1,a)=q2, δ(q1,b)=q1, δ(q2,a)=q1, and δ(q2,b)=q1, the start state q0, and set of accept states F = { q1 }. Kleene's algorithm computes the initial regular expressions as After that, the Rkij are computed from the Rk-1ij step by step for k = 0, 1, 2. Kleene algebra equalities are used to simplify the regular expressions as much as possible. Step 0 Step 1 Step 2 Since q0 is the start state and q1 is the only accept state, the regular expression R201 denotes the set of all strings accepted by the automaton.

  Read more →