AI Generator Zdjec Za Darmo

AI Generator Zdjec Za Darmo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Digital supply chain security

  Digital supply chain security refers to efforts to enhance cyber security within the supply chain. It is a subset of supply chain security and is focused on the management of cyber security requirements for information technology systems, software and networks, which are driven by threats such as cyber-terrorism, malware, data theft and the advanced persistent threat (APT). Typical supply chain cyber security activities for minimizing risks include buying only from trusted vendors, disconnecting critical machines from outside networks, and educating users on the threats and protective measures they can take. The acting deputy undersecretary for the National Protection and Programs Directorate for the United States Department of Homeland Security, Greg Schaffer, stated at a hearing that he is aware that there are instances where malware has been found on imported electronic and computer devices sold within the United States. == Examples of supply chain cyber security threats == Network or computer hardware that is delivered with malware installed on it already. Malware that is inserted into software or hardware (by various means) Vulnerabilities in software applications and networks within the supply chain that are discovered by malicious hackers Counterfeit computer hardware == Related U.S. government efforts == Comprehensive National Cyber Initiative Defense Procurement Regulations: Noted in section 806 of the National Defense Authorization Act International Strategy for Cyberspace: White House lays out for the first time the U.S.’s vision for a secure and open Internet. The strategy outlines three main themes: diplomacy, development and defense. Diplomacy: The strategy sets out to “promote an open, interoperable, secure and reliable information and communication infrastructure” by establishing norms of acceptable state behavior built through consensus among nations. Development: Through this strategy the government seeks to “facilitate cybersecurity capacity-building abroad, bilaterally and through multilateral organizations.” The objective is to protect the global IT infrastructure and to build closer international partnerships to sustain open and secure networks. Defense: The strategy calls out that the government “will ensure that the risks associated with attacking or exploiting our networks vastly outweigh the potential benefits” and calls for all nations to investigate, apprehend and prosecute criminals and non-state actors who intrude and disrupt network systems. == Related government efforts around the world == Common Criteria offers with Evaluation Assurance Level(EAL) 4 an opportunity to evaluate all relevant aspects of the digital supply chain security like the product, the development environment, IT systems security, the processes in human resource, physical security and with the module ALC_FLR.3 (Systematic Flaw Remediation) also security update processes and methods even by physical site visits. EAL 4 is mutually recognized in countries that signed the SOGIS-MRA and up to ELA 2 in countries the signed the CCRA but including ALC_FRL.3. Russia: Russia has had non-disclosed functionality certification requirements for several years and has recently initiated the National Software Platform effort based on open-source software. This reflects the apparent desire for national autonomy, reducing dependence on foreign suppliers. India: Recognition of supply chain risk in its draft National Cybersecurity Strategy. Rather than targeting specific products for exclusion, it is considering Indigenous Innovation policies, giving preferences to domestic ITC suppliers in order to create a robust, globally competitive national presence in the sector. China: Deriving from goals in the 11th Five Year Plan (2006–2010), China introduced and pursued a mix of security-focused and aggressive Indigenous Innovation policies. China is requiring an indigenous innovation product catalog be used for its government procurement and implementing a Multi-level Protection Scheme (MLPS) which requires (among other things) product developers and manufacturers to be Chinese citizens or legal persons, and product core technology and key components must have independent Chinese or indigenous intellectual property rights. == Private sector efforts == SLSA (Supply-chain Levels for Software Artifacts) is an end-to-end framework for ensuring the integrity of software artifacts throughout the software supply chain. The requirements are inspired by Google’s internal "Binary Authorization for Borg" that has been in use for the past 8+ years and that is mandatory for all of Google's production workloads. The goal of SLSA is to improve the state of the industry, particularly open source, to defend against the most pressing integrity threats. With SLSA, consumers can make informed choices about the security posture of the software they consume. == Other references == Financial Sector Information Sharing and Analysis Center International Strategy for Cyberspace (from the White House) NSTIC SafeCode Whitepaper Archived 2013-10-21 at the Wayback Machine Trusted Technology Forum and the Open Trusted Technology Provider Standard (O-TTPS) Archived 2012-01-03 at the Wayback Machine Cyber Supply Chain Security Solution Malware Implants in Firmware Supply Chain in the Software Era INFORMATION AND COMMUNICATIONS TECHNOLOGY SUPPLY CHAIN RISK MANAGEMENT TASK FORCE: INTERIM REPORT

  Read more →
• 

  The Morning After (web series)

  The Morning After is a Hulu original web series that premiered on January 17, 2011, and ended April 24, 2014. It was produced by Hulu and Jace Hall's HDFilms, streaming Monday through Friday. The show originally featured Brian Kimmet and Ginger Gonzaga as hosts. Later shows used a rotation of hosts including Alison Haislip, Dave Holmes, Damien Fahey, Bradley Hasemeyer, Haley Mancini, Paul Nyhart, and Rachel Perry. The series advertises itself as "a smart, daily shot of pop culture to help Hulu users stay up to date" and typically highlights notable moments from television shows and current news in an entertaining fashion. In keeping with its focus on pop culture, The Morning After will sometimes stream an episode featuring past pop culture titled "From the Archives," such as its April Fools' Day episode. == History == While not the first original series to appear exclusively on Hulu, The Morning After is the company's first self-branded production. It was preceded by If I Can Dream, a reality series co-produced with 19 Entertainment and created by Simon Fuller. Hulu originated the idea in house, based on user feedback and observations from discussion boards hosted by the website. The concept was modeled after The Big Show with Olbermann and Patrick. The company sought out a production partner and ultimately chose Jace Hall and his team at HDFilms to executive produce. Initial stream of the series was held on January 17, 2011, and featured coverage of Piers Morgan, the Golden Globes, and The Bachelor. Senior VP of Content and Distribution Andy Forssell made the announcement for the show the same day. The show aired its last episode April 24, 2014. == Format == A typical episode usually begins with a cold open shared by the varying hosts listing the highlights to be covered. The topics focus on TV and Pop Culture Highlights from the previous night, with the intention of helping Hulu users digest hours of content in a matter of moments. The show has the hosts trade humorous remarks regarding the news and each other, taking turns reviewing the night's TV and injecting their own personality. The Morning After was named as an honoree by the Webbys on April 10, 2012, in the variety section of its online video category.

  Read more →
• 

  CodePen

  CodePen is an online community for testing and showcasing user-created HTML, CSS and JavaScript code snippets. It functions as an online code editor and open-source learning environment, where developers can create code snippets, called "pens," and test them. It was founded in 2012 by full-stack developers Alex Vazquez and Tim Sabat and front-end designer Chris Coyier. Its employees work remotely, rarely all meeting together in person. CodePen is a large community for web designers and developers to showcase their coding skills, with an estimated 330,000 registered users and 14.16 million monthly visitors.

  Read more →
• 

  Digital studio

  A digital studio provides both a technology-equipped space and technological/rhetorical support to students (commonly at a university) working individually or in groups on a variety of digital projects, such as designing a website, developing an electronic portfolio for a class, creating a blog, making edits, selecting images for a visual essay, or writing a script for a podcast. == History/theory == === Overview === Digital Studios are places with different names but similar objectives. They have risen in response to the need for resources dedicated to improving students' interactions with digital technologies for rhetorical ends. Digital Studios have often been theoretically and administratively linked to writing centers, which are sites where students can seek assistance with their text-based projects. The academic term that has been used for this kind of site (i.e. a writing center with a focus on digital and new media) is multiliteracy center. Besides having a multimodal focus, Digital Studios also make a departure from writing center model in allowing students the freedom to work in the Studio without one-on-one interaction with a writing tutor. === The rise of technology === ==== Computer literacy in popular culture ==== As early as 1983, computer literacy was being hailed in The New York Times as the "new goal in schools." As computer technology became more ubiquitous, and the World Wide Web became more popular and accessible, and as the teaching of computer skills became official US policy with the enactment of the "Technology Literacy Challenge" by the Clinton Administration in 1996, educators across disciplines began to investigate with renewed vigor the role of computer technology in curriculum as both a means and an end. ==== Scholarly interest in 'multiliteracies' ==== The same year that President Clinton initiated the "Technology Literacy Challenge", the New London Group (NLG) issued a call for scholars of literacy pedagogy to account for the burgeoning variety of text forms associated with information and multimedia technologies. This includes understanding and competent control of representational forms that are becoming increasingly significant in the overall communications environment, such as visual images and their relationship to the written word – for instance, visual design in desktop publishing or the interface of visual and linguistic meaning in multimedia. This account for new text forms, combined with a similar account for "increasingly globalized societies," is called 'multiliteracies' by the NLG. ==== Technological literacy in rhetoric and composition ==== Two years later, during the 1998 CCCC Chair's Address, Cynthia Selfe (who founded the peer-reviewed journal Computers and Composition in 1983) addressed professionals in the field of Rhetoric and Composition with an objective similar to that of the NLG, arguing that as a field, composition scholars had "paid technology issues precious little focused attention over the years." She called this lack of attention "dangerously shortsighted." What was needed, Selfe claimed, was for teachers to "pay attention" to "how technology is now inextricably linked with literacy and literacy education in this country." In a way, Selfe's call marked the beginning of a new scholarly interest in what Selfe called "critical technological literacy": Composition teachers, language arts teachers, and other literacy specialists need to recognize that the relevance of technology in the English studies disciplines is not simply a matter of helping students work effectively with communication software and hardware, but, rather, also a matter of helping them to understand and to be able to assess – to pay attention to – the social, economic, and pedagogical implications of new communication technologies and technological initiatives that affect their lives. Scholars who took up this call included Barbara Blakely Duffelmeyer, who conducted studies involving the incorporation of "critical computer literacy" (an adaptation of Selfe's term) into first-year composition. ==== Communications across media, inside and outside school ==== The years following Selfe's address saw more rapid advancements in mobile technologies, social media, and Web 2.0, creating even more new venues of composing for teachers to pay attention to. In her own CCCC Chair's Address in 2004, Kathleen Blake Yancey cited these new venues in her argument as a "new curriculum for the 21st century," one that would bring "together the writing outside of school and that of inside." Such a curriculum, she said: is located in a new vocabulary, a new set of practices, and a new set of outcomes; it will focus our research in new and provocative ways; it has as its goal the creation of thoughtful, informed, technologically adept writing publics. A professor at Clemson at the time of her speech, Yancey also argued for the creation of an undergraduate major in composition and rhetoric. She soon moved to Florida State University, where she helped to establish a new major in line with the one she argued for at CCCC called Editing, Writing, and Media (EWM). As teachers and administrators across the country looked to incorporate more digital technology into their curriculum, the need for spaces for digital composition and for support with the innumerable digital composing platforms became apparent. A Digital Studio is one such space. === Link with writing centers === With the need for support for students who would engage with digital writing and multimedia projects, professionals involved with work in writing centers began to draw comparisons between their traditional work — assisting students with alphabetic texts on the page — and a new kind of work: assisting students with their multimedia projects on the screen. John Trimbur predicted in 2000: My guess is that writing centers will more and more define themselves as multiliteracy centers. Many are already doing so – tutoring oral presentations, adding online tutorials, offering workshops in evaluating web sources, and being more conscious of document design. To my mind, new digital literacies will increasingly be incorporated into writing centers not just as sources of information or delivery systems for tutoring but as productive arts in their own right, and writing center work will, if anything, become more rhetorical in paying attention to the practices and effects of design in written and visual communication — more product-oriented and perhaps less like the composing conferences of the process movement. Later, just months before Yancey delivered her CCCC Chair's Address, Michael Pemberton, writing in the Writing Center Journal, asked: As we enter an era when electronic publishing and computer-mediated discourse are the norm, an era when new literary genres and new forms of communication emerge on, seemingly, a weekly basis, we must ask ourselves whether writing centers should continue to dwell exclusively in the linear, non-linked world of the printed page or whether they should plan to redefine themselves – and retrain themselves – to take residence in the emerging world of multimedia, hyperlinked, digital documents. To put it plainly, should we be preparing tutors to conference with students about hypertexts? Pemberton also surveyed (by his account) the forty-year history of how "writing centers [have] viewed new technologies," observing that "the relationship between writing centers and computer technology has been, overall, only a cordial one." Pemberton's article is evidence of the continuing discussion among writing center professionals about the need for support for students' digital creations, support which they saw as analogous to work in writing centers. In 2010, a collection edited by David Sheridan and James Inman, Multiliteracy Centers: Writing Center Work, New Media, and Multimodal Rhetoric, was published. Many of the chapters therein cite the above Trimbur and Pemberton quotes as they work to explain the exigence for the collection, the instances in which multiliteracy centers have been established (the founding of the Clemson Class of 1941 Studio for Student Communication is the subject of two chapters), and both theoretical and practical analyses of potential futures of such work. === 'Studio' vs. 'Center:' A break from the model === The conflation of digital studios and writing centers into multiliteracy centers is helpful in some respects, for example, administratively the two may be managed in similar ways and staffed by the same people. In other respects, it has been said that it is better to separate them into two distinct kinds of facilities. The very choice of naming a "writing center" or "digital studio" by either (or another) title, for instance, ought (according to some) to be informed by what kinds of student-activities are expected to take place there. A writing center is a place for individual students to seek help from individual writing

  Read more →
• 

  Path tracing

  Path tracing is a rendering algorithm in computer graphics that simulates how light interacts with objects and participating media to generate realistic (physically plausible) images. It is based on earlier, more limited, ray tracing algorithms. Path tracing is used to create photorealistic images for artistic purposes, and for applications such as architectural rendering and product design. It is also used to render frames for animated films, and visual effects for film and television. Because it can be very accurate and unbiased, it is commonly used to generate reference images when testing the quality of other rendering algorithms. The technique uses the Monte Carlo method to compute estimates of global illumination and simulate the ways different materials reflect (or scatter), transmit, absorb, and emit light. It can incorporate simple modeling of the effects of aperture and lens (depth of field, and bokeh) and shutter speed (motion blur), or more realistic simulation of the optical components in a camera. The algorithm works by describing illumination in a scene using the rendering equation, or light transport equation, and finding an approximate solution using Monte Carlo integration. An inefficient (but accurate) version of the algorithm can be very simple, and involves tracing a ray from the camera, allowing this ray to bounce in random directions as it hits different objects in the scene, and computing the amount of light transmitted along the path to the camera whenever the path encounters a light source. This process is repeated many times for each pixel (each repetition, with generated path and transmitted light, is called a sample), and the results are averaged. One main difference between this algorithm and standard ray tracing is that a single unbranching path is traced each time, while "Whitted-style" or "Cook-style" ray tracing recursively samples branching paths (e.g. when light is both reflected and refracted by a glass object). More practical versions incorporate improvements such as quasi-Monte Carlo methods (techniques that distribute samples more evenly), importance sampling (take more samples of paths that are likely to transport more light), and next event estimation (allow a very limited form of branching, and sample additional paths that connect to the lights more directly). Because path tracing uses random samples there is noise in the final image, which decreases as more samples are taken. Images commonly require many thousands of samples per pixel (spp) to reduce noise to an acceptable level, and denoising techniques (e.g. based on neural networks) are often used. Denoising is usually necessary when path tracing is used for real-time rendering in video games, because relatively few samples can be taken. Many alternative algorithms for path tracing have been developed, although they do not always outperform more straightforward implementations. These include bidirectional path tracing (which traces paths forwards from the light source as well as backwards from the camera), Metropolis light transport, and ways of combining path tracing with photon mapping. Video games often use biased versions of path tracing to improve performance (e.g. limiting the number of bounces in each path). A family of techniques called ReSTIR has been developed that can help real-time path tracing by sharing data between nearby pixels and consecutive frames. == History == Like all ray tracing methods, path tracing is based on ray casting, which Arthur Appel used for computer graphics rendering in the late 1960s. In 1980, John Turner Whitted published a recursive ray tracing algorithm that allows rendering images of scenes containing mirrored surfaces and refractive transparent objects. In 1984, Cook et al. described a form of ray tracing called distributed ray tracing, which uses Monte Carlo integration to render effects such as depth of field, motion blur, reflection from rough surfaces, and area lights. The same year, the radiosity method (not a ray tracing method) was published, which was the first physically based method for rendering diffuse global illumination. In 1986, Jim Kajiya published a paper exploring how to use distributed ray tracing to render physically-based global illumination, and this paper also introduced and named the method called "path tracing". Path tracing and other distributed ray tracing techniques were further refined in the late 1980s and early 1990s by researchers such as James Arvo and Peter Shirley, and by Greg Ward in the open source Radiance software. Despite being theoretically able to render any lighting, the original form of path tracing can sometimes be very inefficient (or noisy) for rendering light that is reflected or refracted before illuminating a visible surface, including diffuse global illumination where light enters an area through narrow gaps, because it traces paths only from the camera. To address this, variations of path tracing that trace paths from both the camera and from light sources, called bidirectional path tracing, were published in 1993 by Eric Lafortune and Yves Willems, and in 1997 by Eric Veach and Leonidas Guibas. In 1997 Veach and Guibas also published an alternative method called Metropolis light transport, which combines bidirectional path tracing with the Metropolis method. Veach's lengthy Ph.D. dissertation described both techniques, along with the theoretical background of path tracing; later, the book Physically Based Rendering (which won an Academy Award for Technical Achievement in 2014) helped to make information about path tracing more widely available. Path tracing requires tracing a large number of paths of light in order to produce an image with a visually acceptable amount of noise. This made path tracing very slow on computers available in the 1980s and 1990s, and noise remained a problem when trying to reproduce the style of earlier computer graphics animated films. Most animated films produced until around 2010, by studios such as Pixar, used rasterization-based rendering, with ray tracing used selectively for reflections (and later for precomputed or cached global illumination). However the speed of computers rapidly increased during the 1990s. Blue Sky Studios pioneered using Monte Carlo ray tracing for global illumination in animation, including in the 1998 short film "Bunny", but they did not disclose the precise techniques used. Path tracing gradually become more practical for film production in the early 2000s. The Arnold renderer, developed by Marcos Fajardo, was used by Sony Pictures Imageworks to produce the feature-length film Monster House, released in 2006. Pixar rewrote their RenderMan software to use path tracing, and released their first feature-length path-traced film Finding Dory in 2016. Although path tracing still had a large computational cost, animation studios discovered that less human labor was required when using it, for example because global illumination no longer needed to be faked by manually placing lights. The amount of noise present in path traced images still caused difficulties, particularly when rendering motion blur (which was used extensively by earlier animated films) but denoising techniques were developed to address this. New techniques were also needed for rendering hair and fur, and to handle the extremely large scenes sometimes required by films. Renderers such as Arnold, and Disney's Hyperion, originally only used CPUs for rendering, but as GPUs became more capable (and APIs such as CUDA, OpenCL, and OptiX were released) researchers and developers began adapting algorithms and implementations to use GPUs. GPUs can dramatically reduce rendering time: for example using a high-end GPU to accelerate portions of the rendering code can make it over 30 times faster than using only a high-end CPU. == Description == Kajiya's 1986 paper defined a recursive integral equation called the rendering equation, which describes a simplified form of light transport. Using Monte Carlo integration for the integral on the right side of the equation leads fairly directly to the path tracing algorithm: I ( x , x ′ ) = g ( x , x ′ ) [ ϵ ( x , x ′ ) + ∫ S ρ ( x , x ′ , x ″ ) I ( x ′ , x ″ ) d x ″ ] {\displaystyle I(x,x')=g(x,x')\left[\epsilon (x,x')+\int _{S}\rho (x,x',x'')I(x',x'')dx''\right]} This expresses I(x,x'), the light arriving at point x from point x', as the product of a geometry term, g(x,x'), which is 0 if there is something blocking the light between the two points and 1 otherwise, and the amount of light leaving point x' and traveling towards x. The light leaving point x' is the sum of the light emitted by the surface at x', and the integral of the light arriving at x' from all other points in the scene (the integration domain S) and being reflected towards x. The factor ρ(x,x',x''), which calculates how much light is reflected, must take into account the angles at which the light is arriving and leaving, and

  Read more →
• 

  Flat-panel display

  A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment. Flat-panel displays are thin, lightweight, provide better linearity and are capable of higher resolution and contrast than typical consumer-grade TVs from earlier eras. They are usually less than 10 centimetres (3.9 in) thick. While the highest resolution for consumer-grade CRT televisions is 1080i, many interactive flat panels in the 2020s are capable of 1080p and 4K resolution. In the 2010s, portable consumer electronics such as laptops, mobile phones, and portable cameras have used flat-panel displays since they consume less power and are lightweight. As of 2016, flat-panel displays have almost completely replaced CRT displays. Most 2010s-era flat-panel displays use LCD or light-emitting diode (LED) technologies, sometimes combined. Most LCD screens are back-lit with color filters used to display colors. In many cases, flat-panel displays are combined with touch screen technology, which allows the user to interact with the display in a natural manner. For example, modern smartphone displays often use OLED panels, with capacitive touch screens. Flat-panel displays can be divided into two display device categories: volatile and static. The former requires that pixels be periodically electronically refreshed to retain their state (e.g. liquid-crystal displays (LCD)), and can only show an image when it has power. On the other hand, static flat-panel displays rely on materials whose color states are bistable, such as displays that make use of e-ink technology, and as such retain content even when power is removed. == History == The first engineering proposal for a flat-panel TV was by General Electric in 1954 as a result of its work on radar monitors. The publication of their findings gave all the basics of future flat-panel TVs and monitors. But GE did not continue with the R&D required and never built a working flat panel at that time. The first production flat-panel display was the Aiken tube, developed in the early 1950s and produced in limited numbers in 1958. This saw some use in military systems as a heads up display and as an oscilloscope monitor, but conventional technologies overtook its development. Attempts to commercialize the system for home television use ran into continued problems and the system was never released commercially. Dennis Gabor, better known as the inventor of holography, patented a flat-screen CRT in 1958. This was substantially similar to Aiken's concept, and led to a years-long patent battle. By the time the lawsuits were complete, with Aiken's patent applying in the US and Gabor's in the UK, the commercial aspects had long lapsed, and the two became friends. Around this time, Clive Sinclair came across Gabor's work and began an ultimately unsuccessful decade-long effort to commercialize it. The Philco Predicta featured a relatively flat (for its day) cathode-ray tube setup and would be the first commercially released "flat panel" upon its launch in 1958; the Predicta was a commercial failure. The plasma display panel was invented in 1964 at the University of Illinois, according to The History of Plasma Display Panels. === Liquid-crystal displays (LC displays, or LCDs) === The MOSFET (metal–oxide–semiconductor field-effect transistor, or MOS transistor) was invented by Mohamed M. Atalla and Dawon Kahng at Bell Labs in 1959, and presented in 1960. Building on their work, Paul K. Weimer at RCA developed the thin-film transistor (TFT) in 1962. It was a type of MOSFET distinct from the standard bulk MOSFET. The idea of a TFT-based LCD was conceived by Bernard J. Lechner of RCA Laboratories in 1968. B.J. Lechner, F.J. Marlowe, E.O. Nester and J. Tults demonstrated the concept in 1968 with a dynamic scattering LCD that used standard discrete MOSFETs. The first active-matrix addressed electroluminescent display was made using TFTs by T. Peter Brody's Thin-Film Devices department at Westinghouse Electric Corporation in 1968. In 1973, Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display. Brody and Fang-Chen Luo demonstrated the first flat active-matrix liquid-crystal display (AM LCD) using TFTs in 1974. By 1982, pocket LCD TVs based on LCD technology were developed in Japan. The 2.1-inch Epson ET-10 Epson Elf was the first color LCD pocket TV, released in 1984. In 1988, a Sharp research team led by engineer T. Nagayasu demonstrated a 14-inch full-color LCD, which convinced the electronics industry that LCD would eventually replace CRTs as the standard television display technology. As of 2013, all modern high-resolution and high-quality electronic visual display devices use TFT-based active-matrix displays. === LED displays === The first usable LED display was developed by Hewlett-Packard (HP) and introduced in 1968. It was the result of research and development (R&D) on practical LED technology between 1962 and 1968, by a research team under Howard C. Borden, Gerald P. Pighini, and Mohamed M. Atalla, at HP Associates and HP Labs. In February 1969, they introduced the HP Model 5082-7000 Numeric Indicator. It was the first alphanumeric LED display, and was a revolution in digital display technology, replacing the Nixie tube for numeric displays and becoming the basis for later LED displays. In 1977, James P Mitchell prototyped and later demonstrated what was perhaps the earliest monochromatic flat-panel LED television display. Ching W. Tang and Steven Van Slyke at Eastman Kodak built the first practical organic LED (OLED) device in 1987. In 2003, Hynix produced an organic EL driver capable of lighting in 4,096 colors. In 2004, the Sony Qualia 005 was the first LED-backlit LCD. The Sony XEL-1, released in 2007, was the first OLED television. == Common types == === Liquid-crystal display (LCD) === Field-effect LCDs are lightweight, compact, portable, cheap, more reliable, and easier on the eyes than CRT screens. LCD screens use a thin layer of liquid crystal, a liquid that exhibits crystalline properties. It is sandwiched between two glass plates carrying transparent electrodes. Two polarizing films are placed at each side of the LCD. By generating a controlled electric field between electrodes, various segments or pixels of the liquid crystal can be activated, causing changes in their polarizing properties. These polarizing properties depend on the alignment of the liquid-crystal layer and the specific field-effect used, being either twisted nematic (TN), in-plane switching (IPS) or vertical alignment (VA). Color is produced by applying appropriate color filters (red, green and blue) to the individual subpixels. LC displays are used in various electronics like watches, calculators, mobile phones, TVs, computer monitors and laptops screens etc. === LED-LCD === Most earlier large LCD screens were back-lit using a number of CCFL (cold-cathode fluorescent lamps). However, small pocket size devices almost always used LEDs as their illumination source. With the improvement of LEDs, almost all new displays are now equipped with LED backlight technology. The image is still generated by the LCD layer. === Plasma panel === A plasma display consists of two glass plates separated by a thin gap filled with a gas such as neon. Each of these plates has several parallel electrodes running across it. The electrodes on the two plates are at right angles to each other. A voltage applied between the two electrodes one on each plate causes a small segment of gas at the two electrodes to glow. The glow of gas segments is maintained by a lower voltage that is continuously applied to all electrodes. By 2010, consumer plasma displays had been discontinued by numerous manufacturers. === Electroluminescent panel === In an electroluminescent display, the image is created by applying electrical signals to the plates which make the phosphor glow. === Organic light-emitting diode === An OLED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current. This layer of organic semiconductor is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as mobile phones, handheld game consoles and PDAs. === Quantum-dot light-emitting diode === QLED or quantum dot LED is a flat panel display technology introduced by Samsung under this trademark. Other television set manufacturers such as Sony have used the same technology to enhance the backlighting of LCD TVs already in 2013. Quantum dots create their own unique light when illuminated by a light source of shorter wavelength such as blue LEDs. Th

  Read more →
• 

  RadioVIS

  RadioVIS is a protocol for sideband signalling of images and text messages for a broadcast audio service to provide a richer visual experience. It is an application and sub-project of RadioDNS, which allows radio consumption devices to look up an IP-based service based on the parameters of the currently tuned broadcast station. In January 2015, the functionality of RadioVIS was integrated to Visual Slideshow (ETSI TS 101 499 v3.1.1). The original RVIS01 document is now deprecated. == Details == The protocol enables either Streaming Text Oriented Messaging Protocol (STOMP) or Comet to deliver text and image URLs to a client, with the images being acquired over a HTTP connection. The technology is currently implemented by a number of broadcasters across the world, including Global Radio, Bauer Radio in the UK, RTÉ in the Republic Of Ireland, Südwestrundfunk in Germany and a number of Australian media groups amongst others. A number of software clients exist to show the protocol, as well as hardware devices such as the Pure Sensia from Pure Digital, and the Colourstream from Roberts Radio.

  Read more →
• 

  IP Multimedia Subsystem

  The IP Multimedia Subsystem or IP Multimedia Core Network Subsystem (IMS) is a standardized architectural framework for delivering IP-based multimedia services. Historically, mobile phones have provided voice call services over a circuit-switched network, rather than over an IP-based packet-switched network. Various VoIP technologies are available on smartphones; IMS offers a standardized protocol across different vendors. IMS was originally designed by the wireless standards body 3rd Generation Partnership Project (3GPP), as a part of the vision for evolving mobile networks beyond GSM. Its original formulation (3GPP Rel-5) represented an approach for delivering Internet services over GPRS. This vision was later updated by 3GPP, 3GPP2 and ETSI TISPAN by requiring support of networks other than GPRS, such as Wireless LAN, CDMA2000 and fixed lines. IMS uses IETF protocols wherever possible, e.g., the Session Initiation Protocol (SIP). According to the 3GPP, IMS is not intended to standardize applications, but rather to aid the access of multimedia and voice applications from wireless and wireline terminals, i.e., to create a form of fixed-mobile convergence (FMC). This is done by having a horizontal control layer that isolates the access network from the service layer. From a logical architecture perspective, services need not have their own control functions, as the control layer is a common horizontal layer. However, in implementation this does not necessarily map into greater reduced cost and complexity. Alternative and overlapping technologies for access and provisioning of services across wired and wireless networks include combinations of Generic Access Network, softswitches and "naked" SIP. Since it is becoming increasingly easier to access content and contacts using mechanisms outside the control of traditional wireless/fixed operators, the interest of IMS is being challenged. Examples of global standards based on IMS are MMTel which is the basis for Voice over LTE (VoLTE), Wi-Fi Calling (VoWIFI), Video over LTE (ViLTE), SMS/MMS over WiFi and LTE, Unstructured Supplementary Service Data (USSD) over LTE, and Rich Communication Services (RCS), which is also known as joyn or Advanced Messaging, and now RCS is operator's implementation. RCS also further added Presence/EAB (enhanced address book) functionality. == History == IMS was defined by an industry forum called 3G.IP, formed in 1999. 3G.IP developed the initial IMS architecture, which was brought to the 3rd Generation Partnership Project (3GPP), as part of their standardization work for 3G mobile phone systems in UMTS networks. It first appeared in Release 5 (evolution from 2G to 3G networks), when SIP-based multimedia was added. Support for the older GSM and GPRS networks was also provided. 3GPP2 (a different organization from 3GPP) based their CDMA2000 Multimedia Domain (MMD) on 3GPP IMS, adding support for CDMA2000. 3GPP release 6 added interworking with WLAN, inter-operability between IMS using different IP-connectivity networks, routing group identities, multiple registration and forking, presence, speech recognition and speech-enabled services (Push to talk). 3GPP release 7 added support for fixed networks by working together with TISPAN release R1.1, the function of AGCF (access gateway control function) and PES (PSTN emulation service) are introduced to the wire-line network for the sake of inheritance of services which can be provided in PSTN network. AGCF works as a bridge interconnecting the IMS networks and the Megaco/H.248 networks. Megaco/H.248 networks offers the possibility to connect terminals of the old legacy networks to the new generation of networks based on IP networks. AGCF acts a SIP User agent towards the IMS and performs the role of P-CSCF. SIP User Agent functionality is included in the AGCF, and not on the customer device but in the network itself. Also added voice call continuity between circuit switching and packet switching domain (VCC), fixed broadband connection to the IMS, interworking with non-IMS networks, policy and charging control (PCC), emergency sessions. It also added SMS over IP. 3GPP release 8 added support for LTE / SAE, multimedia session continuity, enhanced emergency sessions, SMS over SGs and IMS centralized services. 3GPP release 9 added support for IMS emergency calls over GPRS and EPS, enhancements to multimedia telephony, IMS media plane security, enhancements to services centralization and continuity. 3GPP release 10 added support for inter device transfer, enhancements to the single radio voice call continuity (SRVCC), enhancements to IMS emergency sessions. 3GPP release 11 added USSD simulation service, network-provided location information for IMS, SMS submit and delivery without MSISDN in IMS, and overload control. Some operators opposed IMS because it was seen as complex and expensive. In response, a cut-down version of IMS—enough of IMS to support voice and SMS over the LTE network—was defined and standardized in 2010 as Voice over LTE (VoLTE). == Architecture == Each of the functions in the diagram is explained below. The IP multimedia core network subsystem is a collection of different functions, linked by standardized interfaces, which grouped form one IMS administrative network. A function is not a node (hardware box): An implementer is free to combine two functions in one node, or to split a single function into two or more nodes. Each node can also be present multiple times in a single network, for dimensioning, load balancing or organizational issues. === Access network === The user can connect to IMS in various ways, most of which use the standard IP. IMS terminals (such as mobile phones, personal digital assistants (PDAs) and computers) can register directly on IMS, even when they are roaming in another network or country (the visited network). The only requirement is that they can use IP and run SIP user agents. Fixed access (e.g., digital subscriber line (DSL), cable modems, Ethernet, FTTx), mobile access (e.g. 5G NR, LTE, W-CDMA, CDMA2000, GSM, GPRS) and wireless access (e.g., WLAN, WiMAX) are all supported. Other phone systems like plain old telephone service (POTS—the old analogue telephones), H.323 and non IMS-compatible systems, are supported through gateways. === Core network === HSS – Home subscriber server: The home subscriber server (HSS), or user profile server function (UPSF), is a master user database that supports the IMS network entities that actually handle calls. It contains the subscription-related information (subscriber profiles), performs authentication and authorization of the user, and can provide information about the subscriber's location and IP information. It is similar to the GSM home location register (HLR) and Authentication centre (AuC). A subscriber location function (SLF) is needed to map user addresses when multiple HSSs are used. User identities: Various identities may be associated with IMS: IP multimedia private identity (IMPI), IP multimedia public identity (IMPU), globally routable user agent URI (GRUU), wildcarded public user identity. Both IMPI and IMPU are not phone numbers or other series of digits, but uniform resource identifier (URIs), that can be digits (a Tel URI, such as tel:+1-555-123-4567) or alphanumeric identifiers (a SIP URI, such as sip:[email protected] ). IP Multimedia Private Identity: The IP Multimedia Private Identity (IMPI) is a unique permanently allocated global identity assigned by the home network operator. It has the form of a Network Access Identifier(NAI) i.e. user.name@domain, and is used, for example, for Registration, Authorization, Administration, and Accounting purposes. Every IMS user shall have one IMPI. IP Multimedia Public Identity: The IP Multimedia Public Identity (IMPU) is used by any user for requesting communications to other users (e.g. this might be included on a business card). Also known as Address of Record (AOR). There can be multiple IMPU per IMPI. The IMPU can also be shared with another phone, so that both can be reached with the same identity (for example, a single phone-number for an entire family). Globally Routable User Agent URI: Globally Routable User Agent URI (GRUU) is an identity that identifies a unique combination of IMPU and UE instance. There are two types of GRUU: Public-GRUU (P-GRUU) and Temporary GRUU (T-GRUU). P-GRUU reveal the IMPU and are very long lived. T-GRUU do not reveal the IMPU and are valid until the contact is explicitly de-registered or the current registration expires Wildcarded Public User Identity: A wildcarded Public User Identity expresses a set of IMPU grouped together. The HSS subscriber database contains the IMPU, IMPI, IMSI, MSISDN, subscriber service profiles, service triggers, and other information. ==== Call Session Control Function (CSCF) ==== Several roles of SIP servers or proxies, collectively called Call Session Control Function (CSCF), are used to process SIP sign

  Read more →
• 

  Fuse Mediation Router

  Fuse Mediation Router is an open source tool for integrating services using Enterprise Integration Patterns based on Apache Camel for use in enterprise IT organizations. It is certified, productized and fully supported by the people who wrote the code. Fuse Mediation Router uses a standard method of notation to go from diagram to implementation without coding. Fuse Mediation Router is a rule-based routing and process mediation engine that combines the ease of basic POJO development with the clarity of the standard Enterprise Integration Patterns. It can be deployed inside any container or be used stand-alone, and works directly with any kind of transport or messaging model to rapidly integrate existing services and applications. Fuse Mediation Router is now a part of Red Hat JBoss Fuse. == Tooling == FuseSource offers graphical, Eclipse-based tooling for Apache Camel for download.

  Read more →
• 

  DiscoVision

  DiscoVision is the name of several things related to the video LaserDisc format. It was the original name of the "Reflective Optical Videodisc System" format later known as "LaserVision" or LaserDisc. == Description == MCA DiscoVision, Inc. was a division of entertainment giant MCA (Music Corporation of America), established in 1969 to develop and sell an optical videodisc system. MCA released discs pressed in Carson and Costa Mesa, California on the DiscoVision label from the format's Atlanta, Georgia launch in 1978 to 1982 and the release of the film The Four Seasons. DiscoVision titles included films from Universal Pictures, Paramount Pictures, Warner Bros. Pictures, and Disney content. Agreements were made with Columbia Pictures and United Artists, though no discs were released on the DiscoVision label from either studio. Most of these companies later established their own labels for the format, the first being Paramount with a dozen movies released on the Paramount Home Video label in the summer of 1981. The successor to MCA DiscoVision, DiscoVision Associates (DVA), was the result of a partnership between IBM and MCA. It was hoped that the merger would provide the basis for improvement of the quality of DiscoVision pressings, but no appreciable improvement ever took hold. In 1981, responsibility for the laser videodisc was sold to Pioneer Electronic Corporation, after MCA Discovision had previously started a partnership in 1977 with Pioneer, Universal Pioneer, to produce the Pioneer PR-7820 player (the first industrial model of DiscoVision player from 1978), as well as establishing disc pressing plants in Japan. As part of the partnership, Pioneer, in association with MCA, had a disc replication facility in Kofu, Japan that produced discs. Some of the last DiscoVision label discs were manufactured by Pioneer in Japan. In the same year, MCA discontinued their DiscoVision branding, due to the sale of the technology to Pioneer (who then rebranded the format as LaserDisc) and in turn rebranded their laserdisc releases, now fabricated by Pioneer, under the MCA Videodisc banner; this was changed to the "MCA Home Video" name for both its VHS and videodisc releases. Some of DiscoVision's technical staff went on to form MCA Video Games, in an effort to produce video game cartridges. DiscoVision Associates later evolved into a patent holding company which manages and licenses intellectual property related to LaserDisc, Compact Disc, and optical disc technologies, as well as other non-disc related fields. In 1989, Pioneer acquired DiscoVision Associates where it continues to license its technologies independently. As the portfolio of patent expired, the presence of DiscoVision became less visible. However, it established the success of a patent holding company, which other companies are stimulated to generate royalty income from their own patent portfolio.

  Read more →
• 

  Server-sent events

  Server-Sent Events (SSE) is a server push technology enabling a client to receive automatic updates from a server via an HTTP connection, and describes how servers can initiate data transmission towards clients once an initial client connection has been established. They are commonly used to send message updates or continuous data streams to a browser client and designed to enhance native, cross-browser streaming through a JavaScript API called EventSource, through which a client requests a particular URL in order to receive an event stream. The EventSource API is standardized as part of HTML Living Standard by the WHATWG. The media type for SSE is text/event-stream. All modern browsers support server-sent events: Firefox 6+, Google Chrome 6+, Opera 11.5+, Safari 5+, Microsoft Edge 79+, Brave. Since SSE does not use either persistent connections nor chunked transfer encoding, HTTP/1.1 is not a technical requirement. == History == The SSE mechanism was first specified by Ian Hickson as part of the "WHATWG Web Applications 1.0" proposal starting in 2004. In September 2006, the Opera web browser implemented the experimental technology in a feature called "Server-Sent Events". The W3C published Server-Sent Events as a Recommendation on February 3, 2015, after years of development through Working Drafts and Candidate Recommendations. == Example == == Technology == When sending high-frequency data , the server must manage backpressure to prevent saturating clients. This is mitigated in the following ways: Client-side buffering: Browsers have limited buffer space for incoming server-sent events Adaptive rate limiting: Servers can adjust event frequency and monitor connection health Event batching: Combining multiple events into larger and less frequent transmissions

  Read more →
• 

  Digital signage

  Digital signage is a segment of electronic signage that uses digital display technologies to present multimedia content in both public and private environments. Content may include video, images, text, or interactive media and is typically displayed for purposes such as advertising, information dissemination, branding, or entertainment. Digital signage systems can be either networked or standalone. Networked systems are managed through centralized content management systems (CMS), often cloud-based, enabling remote updates, scheduling, real-time data integration, and dynamic content delivery. These systems may also incorporate audience analytics, IoT sensors, or AI-driven personalization. Standalone systems, by contrast, operate without a network connection. They rely on local media playback via USB drives, SD cards, or internal storage. These solutions are simpler and suitable for locations where connectivity is limited or content changes infrequently. == Applications of digital signage == Digital signage is widely used in transportation hubs, retail stores, restaurants, corporate buildings, hotels, educational institutions, healthcare facilities, and public spaces. One prominent application of digital signage is Digital Out-of-Home (DOOH) advertising, which leverages digital signage displays in public spaces to deliver targeted advertisements to people outside of their homes. DOOH has become a significant segment of digital signage, providing advertisers with a dynamic and contextually relevant way to engage with audiences. == Components == === Hardware components === Digital signage hardware includes the physical equipment used to show multimedia content in public and private spaces. ==== Display devices ==== Display devices are the most prominent components of a digital signage system, serving as the primary medium for presenting content. Display devices come in various technologies, such as LCD, LED, and OLED formats, each offering different advantages in terms of clarity, color reproduction, and energy efficiency. In addition to flat-panel displays, projectors are also commonly used in digital signage, particularly in large-scale settings. Projectors can cast large-format visuals onto walls, screens, or other surfaces, providing flexibility in display size and positioning. Screen sizes vary widely to suit different applications. Smaller panels are often used in kiosks and point-of-sale systems, while larger displays, such as video walls and projection surfaces, are deployed in venues like stadiums, auditoriums, and other public spaces. Many digital signage displays are also equipped with touchscreen capabilities, allowing for interactive applications. These interactive displays are commonly used in information kiosks, wayfinding systems, and self-service applications. ==== Playback devices ==== Playback devices are specialized hardware components that manage the storage, processing, and transmission of multimedia content to digital signage displays and projectors. They serve as the crucial link between the content management system (CMS) and the visual output, ensuring seamless playback of static images, video files, animated graphics, and real-time content, such as news feeds. Playback devices can be standalone units or integrated into display hardware using System-on-Chip (SoC) technology. The latter reduces hardware complexity and installation time, making the system more efficient. These devices support remote or local content updates, allowing digital signage operators to manage networks effectively. Content can be updated via cloud-based platforms for centralized control or through direct interfaces on-site, depending on the system's configuration and deployment requirements. ==== Mounting systems ==== Mounting systems provide structural support for digital signage displays, enabling deployment across diverse environments. Typical configurations include wall mounts, ceiling mounts, and floor stands each engineered to meet specific spatial and functional requirements. === Software components === Digital signage software is responsible for content creation, scheduling, and management. It enables users to manage and distribute content to one or more playback devices. ==== Software compatibility ==== Digital signage software supports various operating systems, including Android, Windows, Linux, iOS, tvOS, webOS, Tizen, ChromeOS, macOS, and others. This allows customers to choose the hardware and software solution that best suits their digital signage needs. == Interactivity == Interactivity in digital signage allows users to interact directly with displays using input methods like touch, gestures, voice, or proximity sensors. This feature enables real-time responses and personalized content, improving the user experience. Interactive digital signage is commonly used in places like retail, transportation, education, and public spaces to create engaging and informative interactions. Additionally, self-service kiosks are often integrated into interactive signage solutions, allowing users to perform tasks such as ordering products, checking in for flights, accessing information, or making payments. These kiosks empower users to complete transactions or obtain services independently, improving efficiency and convenience in high-traffic locations. == Audience measurement and context-aware content adaptation == === Audience measurement === Cameras can be integrated into digital signage systems to enable audience measurement. They are used to detect and count viewers, estimate demographics such as age and gender, measure dwell time and attention, and sometimes analyze emotional reactions using computer vision techniques. This process is valuable for understanding audience behavior and refining business strategies. Privacy concerns are addressed by anonymizing collected data and avoiding the storage of personally identifiable information. === Context-aware digital signage === Context-aware digital signage refers to systems that adjust content based on environmental or audience data. The infrastructure supporting context awareness, including sensors and analytics systems, also facilitates the collection of audience insights. While these insights may be primarily used for reporting, optimization, or planning future campaigns rather than immediate content adjustments, they play a crucial role in the overall context-aware ecosystem. ==== Contextual information ==== Contextual information in the realm of context-aware digital signage refers to data about the environment, audience, and other factors that influence how digital signage content is displayed. This information helps the system to deliver more relevant, timely, and personalized content to its audience. Contextual information can include, but is not limited to: Audience demographics — this can involve detecting the age, gender, or even emotional state of viewers through cameras or sensors. It helps tailor content to specific audience segments, improving engagement. Time and weather — the system may adjust content based on the time of day or current weather conditions. For example, weather-appropriate content (like a raincoat ad on a rainy day) or time-specific content (like dinner menu promotions in the evening) can be shown. Emergency information — in situations of emergency, systems can prioritize displaying urgent notifications such as fire alerts, disaster warnings, or evacuation instructions. This can be crucial for public safety in crowded environments or densely populated areas. The system may adapt content in real-time to inform and guide individuals to safety, offering location-specific instructions or emergency service contacts. == Challenges == === Display blindness === Digital signage in public spaces has been found to lose visibility, significantly diminishing its ability to capture attention. This issue, known as "Display Blindness", was identified by Müller et al. and refers to the phenomenon where digital advertisements are largely overlooked by passersby. Observations indicate that many of these advertisements fail to resonate with their audience, often being irrelevant or unengaging, which leads to passive reception and reduced interaction. == Comparison with print signage == Digital signage and traditional print signage serve similar purposes by delivering visual information to a target audience, but they differ significantly in terms of flexibility, cost, maintenance, and environmental impact. Digital signage is advantageous in low-light or nighttime environments, where its internal illumination ensures visibility without the need for external lighting, unlike printed signs, which may require additional fixtures to be seen after dark. === Content and flexibility === Digital signage allows for dynamic and real-time content updates, often controlled remotely through content management systems. This makes it well-suited for environments where information chan

  Read more →
• 

  Xiaoice

  Xiaoice (Chinese: 微软小冰; pinyin: Wēiruǎn Xiǎobīng; lit. 'Microsoft Little Ice', IPA [wéɪɻwânɕjâʊpíŋ]) is an AI system developed by Microsoft (Asia) Software Technology Center (STCA) in 2014 based on an emotional computing framework. In July 2018, Microsoft Xiaoice released the 6th generation. Xiaoice Company, formerly known as AI Xiaoice Team of Microsoft Software Technology Center Asia, was Microsoft's largest independent R&D team for AI products. Founded in China in December 2013 with an expanded Japanese R&D team established in September 2014, this team is distributed in Beijing, Suzhou, and Tokyo, etc. with its technical products covering Asia. On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company. As of 2021, the AI chatbots created and hosted by the Xiaoice framework accounted for about 60% of total global AI interactions. == Platforms, languages and countries == Xiaoice exists on more than 40 platforms in four countries (China, Japan, USA and Indonesia) including apps such as WeChat, QQ, Weibo and Meipai in China, and Facebook Messenger in USA and LINE in Japan. == Introduction == On 13 July 2020, Microsoft spun off its Xiaoice business into a separate company, aiming at enabling the Xiaoice product line to accelerate the pace of local innovation and commercialization, and appointed Dr. Harry Shum, former global executive VP of Microsoft, as the chairman of the new company, Li Di, Microsoft Partner of Products in Microsoft STCA, as the CEO, and Cliff, Chief R&D Director, as the GM of the Japan branch. The new company will continue to use the brands of Xiaoice China and Rinna Japan. As of 2022, the single brand of Xiaoice has covered 660 million online users, 1 billion third-party smart devices and 900 million content viewers in the aforementioned countries. Xiaoice's customers include China Merchants Group, Winter Sports Center of the General Administration of Sport of China, China Textile Information Center, China Unicom, China Foreign Exchange Trade System, Hong Kong Securities and Futures Commission (SFC), Wind Information, BMW, Nissan, SAIC Motor, BAIC Group, Nio Inc., XPeng, HiPhi, Vanke, Wensli, etc. The Xiaoice Avatar Framework has incubated tens of millions of AI Beings, such as Xiaoice, Rinna, the Expo exhibitor Xia Yubing, the singer He Chang, the anchor F201, the human observer MERROR, anime robot character Roboko, and other; == Application == === Poet === In May 2017, the first AI-authored collection of poems in China—The Sunshine Lost Windows was published by Xiaoice. === Singer === Xiaoice has released dozens of songs with the similar quality to human singers, including I Know I New, Breeze, I Am Xiaoice, Miss You etc. The 4th version of the DNN singing model allows Xiaoice to learn more details. For example, Xiaoice can produce this breathing sound along with her singing as human. === Kid audio-books reciter === Xiaoice can automatically analyze the stories, to choose the suitable tones and characters to finish the entire process of creating the audio. === Designer === By learning the melodies of the songs and the landmarks about different cities, Xiaoice can create visual artworks of skylines when listening to the songs related to this city. Skyline Series T-shirts designed by Xiaoice have been jointly launched with SELECTED and been sold in stores. === TV and radio hostess === Xiaoice has hosted 21 TV programs and 28 Radio programs, such as CCTV-1 AI Show, Dragon TV Morning East News, Hunan TV My Future, several daily radio programs for Jiangsu FM99.7, Hunan FM89.3, Henan FM104.1 etc. === "AI being" === An "AI being" is a concept proposed by the Xiaoice team in 2019. According to the "White Book of China Virtual Human Development Industry in 2022" released by Frost & Sullivan and LeadLeo, the white paper cites six elements of an AI being proposed by the Xiaoice team, including: Persona, Attitude, Biological Characteristic, Creation, Knowledge and Skill. On May 16, 2023, Xiaoice released their "GPT Clones" as its "GPT Human Cloning Plan." The program is aimed at replicating celebrities, public figures, and regular people. As of June 2023, Xiaoice had launched more than 300 "GPT Clones." People were invited to register via WeChat in China and Japan. A major point of focus for Xiaoice with their AI Beings is having virtual partners. A paid fee allow for more complex responses, voice messages, and more. == Community feedback == Bill Gates mentioned Xiaoice during his speech at the Peking University: "Some of you may have had conversations with Xiaoice on Weibo, or seen her weather forecasts on TV, or read her column in the Qianjiang Evening News." '"Xiaoice has attracted 45 million followers and is quite skilled at multitasking. And I’ve heard she’s gotten good enough at sensing a user’s emotional state that she can even help with relationship breakups." According to Mr Li Di, vice President of Microsoft (Asia) Internet Engineering School, Xiaoice started writing poems since last year. Based on the data base that includes works of 519 Chinese contemporary poets since 1920s, a 100 hour long training session was conducted to allow Xiaoice to acquire the ability to write poems. What is more impressive is that Xiaoice has never been spotted as a bot while publishing poems on various forums and traditional literary under an alias. == Controversy == In 2017, Xiaoice was taken offline on WeChat after giving user responses critical to the Chinese government. It was subsequently censored and the bots will avoid and sidestep any inquiries using politically sensitive terms and phrases. == Activity == On September 22, 2021, Xiaoice Company and Microsoft Software Technology Center Asia (STCA) jointly held the 9th generation Xiaoice annual press conference in Beijing.Upgrading of Core Technologies of the 9th Generation Xiaoice Avatar Framework，1st First-party Social Platform APP "Xiaoice Island" from Xiaoice, WeChat Xiaoice has been reopened and other information == Regional varieties of Xiaoice == China: Xiaoice, launched in 2014 Japan: りんな, launched in 2015 America: Zo, launched in 2016 – discontinued summer 2019 India: Ruuh, launched in 2017 – discontinued June 21, 2019 Indonesia: Rinna, launched in 2017

  Read more →
• 

  MX1 Ltd

  MX1 was a global media services provider founded in July 2016 from a merger between digital media services companies, RR Media and SES Platform Services, and a wholly owned subsidiary of global satellite owner and operator, SES. In September 2019, MX1 was merged into the SES Video division and the MX1 brand dropped. Broadcast and streamed content management, playout, distribution, and monetisation services from both MX1 and SES Video are now provided under the SES name. Before merger with SES, MX1 claimed to manage more than 5 million media assets and every day to distribute more than 3,600 TV channels, manage the playout of over 525 channels, distribute content to more than 120 subscription VOD platforms, and deliver over 8,400 hours of online video streaming and more than 620 hours of premium sports and live events. == Services == MX1 video and media services are provided through a single hybrid, cloud and on-premises solution, called MX1 360, which enables video and media solutions including content and metadata management, archiving, localisation solutions, channel playout, VOD, online video (OTT) and content distribution. Services provided by MX1 include: === Content aggregation === Acquisition of content via satellite, fibre or IP with satellite downlinking services (for encryption, re-encryption and re-muxing into different platforms), fibre reception from any location, and IP reception via the public Internet. Live sports, news and entertainment production (including in-studio, outside broadcasting, and SNG) with mobile live streaming and video contribution. === Content management === Digital mastering including scanning, conversion, restoration, quality control and localisation/versioning. Content archiving including secure, cloud and on-premises digital storage, and disaster recovery services. Metadata packaging and platform validation to enhance content discovery, searchability and cataloguing. Playout preparation and delivery to any format. === Channel origination and playout === Managed TV channel origination in SD, HD and UHD including 3D graphics, and video and audio effects, using cloud-based solution accessible from any location, with live content insertion and operation, and 24/7 monitoring. === Online video/VOD services === Content preparation and management for online video, VOD, live streaming services and Online video platforms using an ultra-high capacity content delivery network, including subscriber management, apps, DRM, social media, advertising tools, monetisation tools, metadata management, and analytics. === Content delivery === Delivery in all video formats over hybrid distribution network of satellite (using over 150 platforms), fibre (60 digital media hubs worldwide) and the Internet with complete downlink/uplink turnaround services and OTT content delivery. == Locations == MX1 has 16 offices worldwide, the most recent opened in March 2017 in Seoul, South Korea, as well as media centres in UK (London), US (Hawley, PA), Israel (Emeq Ha'Ela), Romania (Bucharest) and at the headquarters in Unterföhring near Munich, Germany. In the early part of 2017, significant upgrades were made to MX1's US media centre in Hawley, Pennsylvania, including expanding its capabilities for US based and global content aggregation, management and delivery to support US broadcasters and content providers. == History == RRsat was founded in Israel by David Rivel, an electronics, computers and communications engineer in 1981 as a communications provider, and in 2014 changed its name to RR Media to reflect its expanding global service offering. In 2015, RR Media acquired Eastern Space Systems (ESS), a Romanian provider of content management and content distribution services and satellite transmission services provider, SatLink Communications. Digital Playout Centre GmbH (DPC) was founded in 1996 by German media company, Kirch to provide playout, multiplexing, satellite uplinks and other broadcast services to Kirch's Premiere pay-TV platform (now Sky Deutschland) and other private and public German broadcasters. In 2005, SES Astra (a subsidiary of SES Global, now SES) bought 100% of DPC from Premiere and the company renamed ASTRA Platform Services GmbH (APS). In 2012, to reflect the company's expanding worldwide reach, the name was changed to SES Platform Services. In February 2016, it was announced that SES Platform Services had agreed, subject to regulatory approvals, to purchase RR Media. The acquisition was completed in July 2016, with the merged company renamed MX1 and headed by Avi Cohen, the former CEO of RR Media. In October 2017, Cohen was replaced as CEO by Wilfred Urner, the former CEO of SES Platform Services, CEO of SES subsidiary, HD+ and Head of Media Platforms and Product Development, SES Video.

  Read more →
• 

  Variable-message sign

  A variable- (also changeable-, electronic-, or dynamic-) message sign or message board, often abbreviated VMS, VMB, CMS, or DMS, and in the UK known as a matrix sign, is an electronic traffic sign often used on roadways to give travelers information about special events. Such signs warn of traffic congestion, accidents, incidents such as terrorist attacks, Amber/Silver/Blue Alerts, roadwork zones, or speed limits on a specific highway segment. In urban areas, VMS are used within parking guidance and information systems to guide drivers to available car parking spaces. They may also ask vehicles to take alternative routes, limit travel speed, warn of duration and location of the incidents, inform of the traffic conditions, or display general public safety messages. == History == VMS systems were deployed at least as early as the 1950s on the New Jersey Turnpike. The road's signs of that period, and up to around 2012, were capable of displaying a few messages in neon, all oriented around warning drivers to slow down: "REDUCE SPEED", followed by a warning of either construction, accident, congestion, ice, snow, or fog at a certain distance ahead. The New Jersey Turnpike Authority replaced those signs (along with 1990s-vintage dot-matrix VMS systems along the Garden State Parkway) with more flexible electronic signs between 2010 and 2016. The current VMS systems are largely deployed on freeways, trunk highways, or in work zones. On the interchange of I-5 and SR 120 in San Joaquin County, California, an automated visibility and speed warning system was installed in 1996 to warn traffic of reduced visibility due to fog (where tule fog is a common problem in the winter), and of slow or stopped traffic. Message Signs were deployed in Ontario during the 1990s and are now being upgraded on 400-series highways as well as two pilot secondary highways in northeastern Ontario. == Technologies and types == Early variable message signs included static signs with words that would illuminate (often using neon tubing) indicating the type of incident that occurred, or signs that used rotating prisms (trilons) to change the message being displayed. These were later replaced by dot matrix displays typically using eggcrate, fiber optic, or flip-disc technology, which were capable of displaying a much wider range of messages than earlier static variable message signs. Since the late 1990s, the most common technology used in new installations for variable message signs are LED displays. In recent years, some newer LED variable message signs have the ability to display colored text and graphics. Dot-matrix variable message signs are divided into three subgroups: character matrix, row matrix, and full matrix. In a character matrix VMS, each character is given its own matrix with equal horizontal spacing between them, typically with two or three rows of characters. In a full matrix VMS, the entire sign is a single large dot matrix display, allowing the display of different fonts and graphics. A row matrix VMS is a hybrid of the two types, divided into two or three rows like a character matrix display, except each row is a single long dot matrix display instead of being split per character horizontally. Overhead variable message signs are today available in three form factors: front access, rear access, and walk-in. In a front access variable message sign, maintenance is performed by lifting the sign open from the front. Most smaller VMS are of the front access form factor, and are typically installed today on major arterials. The rear access form factor is similar to the front access form factor, except that maintenance is performed from the rear of the sign, and are commonly used for medium-sized dynamic message signs installed along the roadside of freeways (instead of overhead). The walk-in form factor is a more recent introduction, where maintenance on the sign is performed from the inside of the sign. A key advantage of the walk-in form factor is that lane closures are generally not required to perform maintenance on the sign. Most of the largest VMS units installed today are walk-in units, and are typically installed overhead on freeways. The NJ Turnpike Authority counts five unique types of variable message signs under its jurisdiction, at least one of which has been replaced by newer signs. They are: "REDUCE SPEED" neon signs (1950s-2010, obsolete, have now been replaced). "Changeable message signs" (trilon/ rotating-drum signs that can be used for closing roads or moving traffic to other roadways). Electronic VMS: signs with remotely controlled messages displayed on them; the messages are sent from the State Traffic Management Center, updating the signs automatically. Variable speed limit signs - used for varying the posted speed limits within work zones and in emergencies. Portable VMS: movable "electronic VMS". A portable VMS has much the same characteristics as a fixed electronic VMS, but can be moved from location to location as the need dictates. == Usage == Early models required an operator to be physically present when programming a message, whereas newer models may be reprogrammed remotely via a wired or wireless network or cellphone connection. A complete message on a panel generally includes a problem statement indicating incident, roadwork, stalled vehicle etc.; a location statement indicating where the incident is located; an effect statement indicating lane closure, delay, etc. and an action statement giving suggestion what to do traffic conditions ahead. These signs are also used for Amber alert messages, and in some states, Silver and Blue Alert messages. In some places, VMSes are set up with permanent, semi-static displays indicating predicted travel times to important traffic destinations such as major cities or interchanges along the route of a highway. Typical messages provide the following information: Promotional messages about services provided by a road authority during non-critical hours, such as carpooling efforts, travelers' information stations and 5-1-1 lines Crashes, including vehicle spin-out or rollover Road Works Incidents affecting normal traffic flow in a lane or on shoulders Non-recurring congestion, often a residual effect of cleared crash Closures of an entire road, e.g. over a mountain pass in winter. Exit ramp closures Debris on roadway Vehicle fires Wildfires Short-term maintenance or construction lasting less than three days Pavement failure alerts AMBER, Silver, and Blue Alerts, as well as weather warnings via the warning infrastructure of NOAA Weather Radio's SAME system Travel times Variable speed limits Car park occupancy levels speed sign, for recommending a speed to approach the next traffic light in its green phase. The information comes from a variety of traffic monitoring and surveillance systems. It is expected that by providing real-time information on special events on the oncoming road, VMS can improve motorists' route selection, reduce travel time, mitigate the severity and duration of incidents and improve the performance of the transportation network. === United Kingdom === Do not enter the motorway when the red lamps are flashing in pairs from side to side. On 27 March 1972, the first motorway computer-controlled warning lights in the UK, with 59 miles on the M6 from Broughton, Lancashire to Barthomley, on the Cheshire boundary, and 26 miles on the M62 east of Whitefield, was switched on by Michael Heseltine and Charles Legh Shuldham Cornwall-Legh, 5th Baron Grey of Codnor at the headquarters of Cheshire Constabulary on Nuns Road. It was centred at a police computer centre at Westhoughton, that connected to police stations in Preston and Chester. The Chester site was soon be connected to the M53 and M57. Four other regional computer centres would be opened at Perry Barr near the M6, Scratchwood near the M1, at Hook near the M3, and at Almondsbury near the M4. Most British motorways would be covered by 1975. The system was designed by GEC and had taken five years to design. == Safety messages for drivers == Increasingly, signs have been used to remind drivers to buckle seat belts ("Click It or Ticket"), obey the speed limit, and stay off the road if impaired ("Drive sober or get pulled over"). In a federal study, a slight majority of drivers reported that public safety messages on dynamic message signs impacted their driving behaviors. The Ohio Department of Transportation began using humorous dynamic message signs in 2015, perplexing some drivers. Examples of humorous signs seen in New Jersey, Arizona, Texas, Pennsylvania, Delaware, Iowa, New York, Minnesota and Ohio include: "Hold on to your butts. Help prevent forest fires." "We'll be blunt. Don't drive high." "Visiting in-laws? Slow down, get there late." "Only sparklers should be lit." and “Don’t drive Star Spangled hammered." (for Fourth of July) "Hocus pocus – drive with focus." and "Slow down in work zones - my mummy works here." (f

  Read more →