AI Grammar And Vocabulary Checker

AI Grammar And Vocabulary Checker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  NHS COVID-19

  NHS COVID-19 was a voluntary contact tracing app for monitoring the spread of the COVID-19 pandemic in England and Wales, in use from 24 September 2020 until 27 April 2023. It was available for Android and iOS smartphones, and could be used by anyone aged 16 or over. Two versions of the app were created. The first was commissioned by NHSX and developed by the Pivotal division of American software company VMware. A pilot deployment began in May 2020, but on 18 June development of the app was abandoned in favour of a second design using the Apple/Google Exposure Notification system. Scotland and Northern Ireland had separate contact tracing apps. A 2023 study estimated that in its first year of use, the app's contact tracing function prevented an estimated 1 million cases, and 9,600 deaths. == Description == The app allowed users to: See the alert level of their local authority area (in Wales) or information about restrictions (in England); to enable this, the user must enter the first half of their postcode "Check in" at places displaying an NHS QR code poster (no longer required by legislation after 26 January 2022, removed from the app the next month) Be notified when they have been in close contact with someone who has tested positive for the virus Be notified when local health protection teams determine that people with the virus had attended a business or other venue around the same time as the user Check their symptoms, and book a coronavirus test if necessary If asked to self-isolate, receive information and a daily "countdown". At first, "close contact" was defined as being within 2 metres for 15 minutes, or within 4 metres for a longer time. These time durations were reduced from 29 October 2020, to as little as three minutes when the other person is at their most infectious, i.e. soon after they begin showing symptoms. === Implementation === The Android app was coded in Kotlin, and the iOS app in Swift. The backend used Java and is deployed to Amazon Web Services using Terraform. The code of the app and back-end is open-source and available on GitHub. == Context == The app was part of the UK's test and trace programme which was chaired by Dido Harding; from 12 May 2020 Tom Riordan, chief executive of Leeds City Council, led the tracing effort. == First phase and cancellation == === Description === In March 2020, NHSX commissioned a contact tracing app to monitor the spread in the United Kingdom of the coronavirus disease 2019 (COVID-19) in the 2020 pandemic, developed by the Pivotal division of American software company VMware. The app used a centralised approach, in contrast to the Google / Apple contact tracing project. NHSX consulted ethicists and GCHQ's National Cyber Security Centre (NCSC) about the privacy aspects. The app recorded the make and model of the phone and asked the user for their postcode area. It generated a unique installation identification number and also a daily identification number. It then used Bluetooth Low Energy (BLE) to record the daily identification number of other users nearby. If a user was unwell, they could tell the app about symptoms which are characteristic of COVID-19, such as a fever and cough. These details were then passed to a central NHS server. This would assess the information and notify other users that have been in contact, giving them appropriate advice such as physical distancing. The NHS would also arrange for a swab test of the unwell user and the outcome would determine further notifications to contacts: if the test confirmed infection with COVID-19, the contacts would be asked to isolate. By June 2020, £11.8 million had been spent on the app; in 2020–21, £35 million was spent on the app. === Deployment === The first public trial of the app began on the Isle of Wight on 5 May 2020 and by 11 May it had been downloaded 55,000 times. When the first national contact tracing schemes were launched – Test, Trace, Protect in Wales on 13 May, then on 28 May NHS Test and Trace in England, and Test and Protect in Scotland – the app was not ready to be included. Replying to a question at the government's daily briefing on 8 June, Hancock was unable to give a date for rollout of the app in England, saying it would be brought in "when it's right to do so". On 17 June, Lord Bethell, junior minister for Innovation at the Department of Health and Social Care, said "we're seeking to get something going before the winter ... it isn't a priority for us at the moment". On 18 June, Health Secretary Matt Hancock announced development would switch to the Apple/Google system after admitting that Apple's restrictions on usage of Bluetooth prevented the app from working effectively. At the same press briefing Dido Harding, leader of the UK's test and trace programme, said "What we've done in really rigorously testing both our own Covid-19 app and the Google-Apple version is demonstrate that none of them are working sufficiently well enough to be actually reliable to determine whether any of us should self-isolate for two weeks [and] that's true across the world". === Concerns === The first, ultimately rejected, version of the app was subject to privacy concerns, the government backtracking on initial statements that the data collected from the app would not be shared outside the NHS. Matthew Gould, CEO of NHSX, the government department responsible for the app, said the data would be accessible to other organisations, but did not disclose which. Data collected would not necessarily be anonymised and would be held in a centralised repository. Over 150 of the UK's security and privacy experts warned the app's data could be used by 'a bad actor (state, private sector, or hacker)' to spy on citizens. Fears were discussed by the House of Commons' Human Rights Select Committee about plans for the app to record user location data. Parliament's Joint Committee on Human Rights said this version of the app should not be released without proper privacy protections. The second version of the app, released nationwide, addressed these concerns by employing a decentralised framework, the Apple/Google Exposure Notification system. Under this system, users remain pseudonymous: a person diagnosed with COVID-19 does not know which people are informed about an encounter, and contacted persons do not receive any information about the person diagnosed with COVID-19. The functionality of the app was also questioned in late April and early May 2020, as the software's use of Bluetooth required the app to be constantly running, meaning users could not use other apps or lock their device if the app was to function properly. The developers of the app were said to have found a way of working around this restriction. === Related contracts === Faculty – a company linked to Cambridge Analytica – provided research and modelling to NHSX in support of the response to the pandemic. Palantir, also linked to Cambridge Analytica, provided their data management platform. These contracts began in February and March respectively. == Second phase == As outlined on cancellation of the first app on 18 June 2020, the Department of Health and Social Care published on 30 July a brief description of the "next phase" app. Users would be able to scan a QR code at venues they visit, and later be notified if they had visited a place which was the source of a number of infections; the app would also assist with identifying symptoms and ordering a test. By using the Exposure Notification system from Apple and Google, personal data would be decentralised. Zuhlke Engineering Ltd, the UK branch of Swiss-based Zühlke Group, used 70 staff to complete the development of the app in 12 weeks. Zuhlke Engineering was awarded "Development Team of the Year" title at UK IT Industry awards in November 2021 for development of NHS COVID-19 application. === Timeline === Testing of the app by NHS volunteer responders, and selected residents of the Isle of Wight and the London Borough of Newham, began around 13 August. The app was made available to the public (aged 16 or over) in England and Wales on 24 September. An updated app released on 29 October, in part from collaboration with the Alan Turing Institute, improved the accuracy of measurements of the distance between the user's phone and other phones. At the same time, the duration threshold for determining exposure was reduced; this was expected to lead to an increase in the number of users told to self-isolate. An update to the app in April 2021, timed to coincide with easing of restrictions on hospitality businesses, was blocked by Apple and Google. It was intended that users who tested positive would be asked to share their history of visited venues, to assist in warning others, but this would have contravened assurances by Apple and Google that location data from devices would not be shared. === Statistics and effectiveness === The app was downloaded six million times on the first day it was generally availa

  Read more →
• 

  Wavelet noise

  Wavelet noise is an alternative to Perlin noise which reduces the problems of aliasing and detail loss that are encountered when Perlin noise is summed into a fractal. == Algorithm detail == The basic algorithm for 2-dimensional wavelet noise is as follows: Create an image, R {\displaystyle R} , filled with uniform white noise. Downsample R {\displaystyle R} to half-size to create R ↓ {\displaystyle R^{\downarrow }} , then upsample it back up to full size to create R ↓↑ {\displaystyle R^{\downarrow \uparrow }} . Subtract R ↓↑ {\displaystyle R^{\downarrow \uparrow }} from R {\displaystyle R} to create the end result, N {\displaystyle N} . This results in an image that contains all the information that cannot be represented at half-scale. From here, N {\displaystyle N} can be used similarly to Perlin noise to create fractal patterns.

  Read more →
• 

  Internet Security Awareness Training

  Internet Security Awareness Training (ISAT) is the training given to members of an organization regarding the protection of various information assets of that organization. ISAT is a subset of general security awareness training (SAT). Even small and medium enterprises are generally recommended to provide such training, but organizations that need to comply with government regulations (e.g., the Gramm–Leach–Bliley Act, the Payment Card Industry Data Security Standard, Health Insurance Portability and Accountability Act, Sarbanes–Oxley Act) normally require formal ISAT for annually for all employees. Often such training is provided in the form of online courses. ISAT, also referred to as Security Education, Training, and Awareness (SETA), organizations train and create awareness of information security management within their environment. It is beneficial to organizations when employees are well trained and feel empowered to take important actions to protect themselves and organizational data. The SETA program target must be based on user roles within organizations and for positions that expose the organizations to increased risk levels, specialized courses must be required. == Coverage == There are general topics to cover for the training, but it is necessary for each organization to have a coverage strategy based on its needs, as this will ensure the training is practical and captures critical topics relevant to the organization. As the threat landscape changes very frequently, organizations should continuously review their training programs to ensure relevance with current trends. Topics covered in ISAT include: Appropriate methods for protecting sensitive information on personal computer systems, including password policy Various computer security concerns, including spam, malware, phishing, social engineering, etc. Consequences of failure to properly protect information, including potential job loss, economic consequences to the firm, damage to individuals whose private records are divulged, and possible civil and criminal law penalties. Being Internet Security Aware means you understand that there are people actively trying to steal data that is stored within your organization's computers. (This often focuses on user names and passwords, so that criminal elements can ultimately get access to bank accounts and other high-value IT assets.) That is why it is important to protect the assets of the organization and stop that from happening. The general scope should include topics such as password security, Email phishing, Social engineering, Mobile device security, Sensitive data security, and Business communications. In contrast, those requiring specialized knowledge are usually required to take technical and in-depth training courses. Suppose an organization determines that it is best to use one of the available training tools on the market, it must ensure it sets objectives that the training can meet, including confirming the training will provide employees with the knowledge to understand risks and the behaviors needed in managing them, actions to take to prevent or detect security incidents, using language easily understandable by the trainees, and ensuring the pricing is reasonable. Organizations are recommended to base ISAT training content on employee roles and their culture; the policy should guide that training for all employees and gave the following as examples of sources of reference materials: National Institute of Standards and Technology (NIST) Special Publication 800-50, Building an Information Technology Security Awareness and Training Program International Standards Organization (ISO) 27002:2013, Information technology—Security techniques—Code of practice for information security controls International Standards Organization (ISO) 27001:2013, Information technology — Security techniques — Information security management systems COBIT 5 Appendix F.2, Detailed Guidance: Services, Infrastructure and Applications Enabler, Security Awareness The training must focus on current threats specific to an organization and the impacts if that materializes as a result of user actions. Including practical examples and ways of dealing with scenarios help users know the appropriate measures to take. It is a good practice to periodically train customers of specific organizations on threats they face from people with malicious intentions. Coverage strategy for SAT should be driven by an organization's policy. It can help truly determine the level of depth of the training and where it should be conducted at a global level or business unit level, or a combination of both. A policy also empowers a responsible party within the organization to run the training. == Importance == Studies show that well-structured security awareness training can significantly reduce the likelihood of cyber incidents caused by human error. According to the Ponemon Institute, organizations that implement regular security training experience up to 70% fewer successful phishing attacks. Additionally, a 2023 Verizon Data Breach Investigations Report found that 74% of breaches involve the human element, highlighting the need for continuous education. Employees are key in whether organizations are breached or not; there must be a policy on creating awareness and training them on emerging threats and actions to take in safeguarding sensitive information and reporting any observed unusual activity within the corporate environment. Research has shown that SAT has helped reduce cyber-attacks within organizations, especially when it comes to phishing, as trainees learned to identify these attack modes and give them the self-assurance to take action appropriately. There is an increase in phishing attacks, and it has become increasingly important for people to understand how to these attacks work, and the actions required to prevent these and SAT has shown a significant impact on the number of successful phishing attacks against organizations. == Compliance Requirements == Various regulations and laws mandate SAT for organizations in specific industries, including the Gramm–Leach–Bliley Act (GLBA) for the financial services, the Federal Information Security Modernization Act of 2014 for federal agencies, and the European Union's General Data Protection Regulation (GDPR). === Federal Information Security Modernization Act === Employees and contractors in federal agencies are required to receive Security Awareness Training annually, and the program needs to address job-related information security risks linked that provide them with the knowledge to lessen security risks. === Health Insurance Portability and Accountability Act === The Health Insurance Portability and Accountability Act has the Security Rule, and Privacy Rule requiring the creation of a security awareness training program and ensuring employees are trained accordingly. === Payment Card Industry Data Security Standard === The Payment Card Industry Security Standards Council, the governing council for stakeholders in the payment industry, formed by American Express, Discover, JCB International, MasterCard, and Visa that developed the DSS as a requirement for the payment industry. Requirement 12.6 requires member organizations to institute a formal security awareness program. There is a published guide for organizations to adhere to when setting up the program. === US States Training Regulations === Some States mandate Security Awareness Training whiles other do not but simply recommend voluntary training. Among states that require the training for its employees include: Colorado (The Colorado Information Security Act, Colorado Revised Statutes 24-37.5-401 et seq.) Connecticut (13 FAM 301.1-1 Cyber Security Awareness Training (PS800)) Florida (Florida Statutes Chapter 282) Georgia (Executive Order GA E.O.182 mandated training within 90 days of issue) Illinois (Cook County) Indiana (IN H 1240) Louisiana (Louisiana Division of Administration, Office of Technology Services p. 52: LA H 633) Maryland (20-07 IT Security Policy) Montana (Mandatory cyber training for executive branch state employees) Nebraska Nevada (agency-by-agency state employee requirement - State Security Standard 123 – IT Security) New Hampshire New Jersey ( NJ A 1654) North Carolina Ohio (IT-15 - Security Awareness and Training) Pennsylvania Texas Utah Vermont Virginia West Virginia (WV Code Section 5A-6-4a) == Training Techniques == Below are some common training techniques, even though some can be blended depending on the operating environment: Interactive video training – This technique allows users to be trained using two-way interactive audio and video instruction. Web-based training – This method allows employees or users to take the training independently and usually has a testing component to determine if learning has taken place. If not, users can be allowed to retake the course and test to ensure there is a complete understanding

  Read more →
• 

  Texture compression

  Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.

  Read more →
• 

  Linux color management

  Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl

  Read more →
• 

  Snap (computer graphics)

  In computer graphics, snapping allows an object to be easily positioned in alignment with grid lines, guide lines or another object, by causing it to automatically jump to an exact position when the user drags it to the proximity of the desired location. Some CAD software provides a "Snap" pull-down menu with diverse options as preferences for the practice of the operation. In Windows, with the "snap windows" option enabled, snapping a window against the top (or side) edge of the screen causes it to change into full screen (or half-screen for multitasking). Software snapping is analogous to hardware detents which serve to indicate discrete values or steps of an input device.

  Read more →
• 

  Public computer

  A public computer (or public access computer) is any of various computers available in public areas. Some places where public computers may be available are libraries, schools, or dedicated facilities run by government. Public computers share similar hardware and software components to personal computers, however, the role and function of a public access computer is entirely different. A public access computer is used by many different untrusted individuals throughout the course of the day. The computer must be locked down and secure against both intentional and unintentional abuse. Users typically do not have authority to install software or change settings. A personal computer, in contrast, is typically used by a single responsible user, who can customize the machine's behavior to their preferences. Public access computers are often provided with tools such as a PC reservation system to regulate access. The world's first public access computer center was the Marin Computer Center in California, co-founded by David and Annie Fox in 1977. == Kiosks == A kiosk is a special type of public computer using software and hardware modifications to provide services only about the place the kiosk is in. For example, a movie ticket kiosk can be found at a movie theater. These kiosks are usually in a secure browser with zero access to the desktop. Many of these kiosks may run Linux, however, ATMs, a kiosk designed for depositing money, often run Windows XP. == Public computers in the United States == === Library computers === In the United States and Canada, almost all public libraries have computers available for the use of patrons, though some libraries will impose a time limit on users to ensure others will get a turn and keep the library less busy. Users are often allowed to print documents that they have created using these computers, though sometimes for a small fee. ==== Privacy ==== Privacy is an important part of the public library institution, since the libraries entitle the public to intellectual freedom. Use of any computer or network may create records of users' activities that can jeopardize their privacy. It is possible for a patron to jeopardize their privacy if they do not delete cache, clear cookies, or documents from the public computer. In order for a member of the public to remain private on a computer, the American Library Association (ALA) has guidelines. These give patrons an idea of the right way to keep using public library computers. In their provision of services to library users, librarians have an ethical responsibility, expressed in the ALA Code of Ethics, to preserve users' right to privacy. A librarian is also responsible for giving users an understanding of private patron use and access. Libraries must ensure that users have the following rights when browsing on public computers: the computer automatically will clear a users history; libraries should display privacy screens so users do not see another patron's screen; updating software for effective safety measures; restoration data software to clear documents that users may have left on their computers and to combat possible malware; security practices; and making users aware of any possible monitoring of their browsing activities. Users can also view the Library Privacy Checklist for Public Access Computers and Networks to better understand what libraries strive for when protecting privacy. === School computers === The U.S. government has given money to many school boards to purchase computers for educational applications. Schools may have multiple computer labs, which contain these computers for students to use. There is usually Internet access on these machines, but some schools will put up a blocking service to limit the websites that students are able to access to only include educational resources, such as Google. In addition to controlling the content students are viewing, putting up these blocks can also help to keep the computers safe by preventing students from downloading malware and other threats. However, the effectiveness of such content filtering systems is questionable since it can easily be circumvented by using proxy websites, Virtual Private Networks, and for some weak security systems, merely knowing the IP address of the intended website is enough to bypass the filter. School computers often have advanced operating system security to prevent tech-savvy students from inflicting damage (i.e. the Windows Registry Editor and Task Manager, etc.) are disabled on Microsoft Windows machines. Schools with very advanced tech services may also install a locked down BIOS/firmware or make kernel-level changes to the operating system, precluding the possibility of unauthorized activity.

  Read more →
• 

  RockMyRun

  Rock My Run (stylized as RockMyRun; trademarked slogan: "The Best Running Music in the World™") is a mobile running/fitness app founded in 2011 that provides running and workout music in the form of DJ mixes. It is owned by Rock My World, Inc., a health and fitness technology company based in San Diego, California. The app allows users to listen to these professional DJ mixes on their smartphone while running or working out to enhance and motivate their performance. Rock My World, Inc. also developed the app Jolt.ai for the software Slack. == History == During the early stages of the company, Rock My World, Inc. raised more than $2 million in funding generated by the Irvine Company's The Vine SD and from institutional investors including Skullcandy, ZTE and Lighter Capital and were admitted to the Plug and Play Tech Center in Sunnyvale and to the tech incubator EvoNexus in San Diego. In an interview with co-founder and ex-Qualcomm staff Adam Riggs-Zeigen, he said that "from the beginning [their] big goal is to help people live healthier lives." == Features == The RockMyRun app contains thousands of mixes or "stations" produced by its professional DJs intended to increase enjoyment and performance during exercise. DJs who have provided mixes for the app include David Guetta, Zedd, Steve Aoki, Major Lazer and Afrojack. All of the music can be personalized based on the user's steps per minute, heart rate or ideal cadence allowing the user to "always hear the right music at the right time at the right tempo". All RockMyRun mixes are organized into stations to help users discover music that suits their needs. RockMyRun contains mixes of all genres and each station is categorized into their respective genres and displays tags to let users know the type of music contained in the mix. RockMyRun has two membership types; it is free as a standard member, but for uninterrupted listening and additional features, users can upgrade to a paid "Rockstar" membership. Since March 2023, couples can now be on the same RockMyRun playlists and "share" earbuds. This allows people to train together, easier. A group of DJs curate playlists for specific training needs and different energy levels. == Reception == RockMyRun has been featured on television programs such as The Today Show on two occasions and on The Rachael Ray Show, and in positive reviews by many publications and websites including The New York Times on four separate occasions, TIME, The Huffington Post, The Denver Post, Men's Fitness, Real Simple, The Vulcan Post, The L.A. Times, Glamour, Paste magazine, PCMag, Dubai Week, BetaNews, CNET, CNBC, Reuters, Insider, Tom's Guide and Yahoo! Tech. RockMyRun has also been mentioned/recommended in books/publications such as A Practical Guide to Teacher Wellbeing by Elizabeth Holmes and Applying Music in Exercise and Sport by Dr. Costas Karageorghis. Ultimate Ears placed RockMyRun at the top of their list at No. 1 on their "5 Favorite Workout Music Apps". In a positive review by David Strausser for AndroidGuys in 2015, he praised the app in a detailed review, saying "The mixes are incredible and the rates are reasonable. The app is quick, beautiful." In 2015, Jill Duffy of PC Magazine gave a review of the app, pointing out its key features, and stating that the app is great if you enjoy listening to different, or new music, that can match your tempo while running. Also in 2015, Digital Trends listed RockMyRun, as one of the best exercise music apps in the article "No need to make exercise playlists with these music apps". In 2018, Redbull.com recommended RockMyRun in preparation for the Wings for Life World Run in their article "10 essential hacks for running to work to get you in World Run shape". In 2019, The Fashion Spot included RockMyRun in their list of "The Best Workout Apps for People Who Hate to Work Out", saying: "RockMyRun matches music to the tempo of your running pace – the music literally follows your steps/heart rate. The app has thousands of mixes/music options along with tracking capabilities." Also in 2019, MakeUseOf.com included RockMyRun in their list of "The 7 Best Running and Workout Music Apps". In September 2022, VeryWellFit listed RockMyRun as the first of three "Other Playlist Options" in the article "How to Create a Running Playlist, According to Running Coaches". Tech Grapple recommended the app in "The best workout free music apps for iPhone and Android" saying that "RockMyRun is the best application that you can use during workout. It comes with amazing DJs to craft mixes that will keep you moving." == Partners == RockMyRun is partnered with the following brands/companies: C25K Del Taco JLab Audio iFit Active Network, LLC Night Nation Run (the world's first running music festival) Lady Foot Locker Mayweather Boxing + Fitness Mio Global Orangetheory Fitness Red Rock Apps Tapout Fitness

  Read more →
• 

  Connectionist expert system

  Connectionist expert systems are artificial neural network (ANN) based expert systems where the ANN generates inferencing rules e.g., fuzzy-multi layer perceptron where linguistic and natural form of inputs are used. Apart from that, rough set theory may be used for encoding knowledge in the weights better and also genetic algorithms may be used to optimize the search solutions better. Symbolic reasoning methods may also be incorporated (see hybrid intelligent system). (Also see expert system, neural network, clinical decision support system.)

  Read more →
• 

  Real-time computer graphics

  Real-time computer graphics or real-time rendering is the sub-field of computer graphics focused on producing and analyzing images in real time. The term can refer to anything from rendering an application's graphical user interface (GUI) to real-time image analysis, but is most often used in reference to interactive 3D computer graphics, typically using a graphics processing unit (GPU). One example of this concept is a video game that rapidly renders changing 3D environments to produce an illusion of motion. Computers have been capable of generating 2D images such as simple lines, images and polygons in real time since their invention. However, quickly rendering detailed 3D objects is a daunting task for traditional Von Neumann architecture-based systems. An early workaround to this problem was the use of sprites, 2D images that could imitate 3D graphics. Different techniques for rendering now exist, such as ray-tracing and rasterization. Using these techniques and advanced hardware, computers can now render images quickly enough to create the illusion of motion while simultaneously accepting user input. This means that the user can respond to rendered images in real time, producing an interactive experience. == Principles of real-time 3D computer graphics == The goal of computer graphics is to generate computer-generated images, or frames, using certain desired metrics. One such metric is the number of frames generated in a given second. Real-time computer graphics systems differ from traditional (i.e., non-real-time) rendering systems in that non-real-time graphics typically rely on ray tracing. In this process, millions or billions of rays are traced from the camera to the world for detailed rendering—this expensive operation can take hours or days to render a single frame. Real-time graphics systems must render each image in less than 1/30th of a second. Ray tracing is far too slow for these systems; instead, they employ the technique of z-buffer triangle rasterization. In this technique, every object is decomposed into individual primitives, usually triangles. Each triangle gets positioned, rotated and scaled on the screen, and rasterizer hardware (or a software emulator) generates pixels inside each triangle. These triangles are then decomposed into atomic units called fragments that are suitable for displaying on a display screen. The fragments are drawn on the screen using a color that is computed in several steps. For example, a texture can be used to "paint" a triangle based on a stored image, and then shadow mapping can alter that triangle's colors based on line-of-sight to light sources. === Video game graphics === Real-time graphics optimizes image quality subject to time and hardware constraints. GPUs and other advances increased the image quality that real-time graphics can produce. GPUs are capable of handling millions of triangles per frame, and modern DirectX/OpenGL class hardware is capable of generating complex effects, such as shadow volumes, motion blurring, and triangle generation, in real-time. The advancement of real-time graphics is evidenced in the progressive improvements between actual gameplay graphics and the pre-rendered cutscenes traditionally found in video games. Cutscenes are typically rendered in real-time—and may be interactive. Although the gap in quality between real-time graphics and traditional off-line graphics is narrowing, offline rendering remains much more accurate. === Advantages === Real-time graphics are typically employed when interactivity (e.g., player feedback) is crucial. When real-time graphics are used in films, the director has complete control of what has to be drawn on each frame, which can sometimes involve lengthy decision-making. Teams of people are typically involved in the making of these decisions. In real-time computer graphics, the user typically operates an input device to influence what is about to be drawn on the display. For example, when the user wants to move a character on the screen, the system updates the character's position before drawing the next frame. Usually, the display's response-time is far slower than the input device—this is justified by the immense difference between the (fast) response time of a human being's motion and the (slow) perspective speed of the human visual system. This difference has other effects too: because input devices must be very fast to keep up with human motion response, advancements in input devices (e.g., the current Wii remote) typically take much longer to achieve than comparable advancements in display devices. Another important factor controlling real-time computer graphics is the combination of physics and animation. These techniques largely dictate what is to be drawn on the screen—especially where to draw objects in the scene. These techniques help realistically imitate real world behavior (the temporal dimension, not the spatial dimensions), adding to the computer graphics' degree of realism. Real-time previewing with graphics software, especially when adjusting lighting effects, can increase work speed. Some parameter adjustments in fractal generating software may be made while viewing changes to the image in real time. == Rendering pipeline == The graphics rendering pipeline ("rendering pipeline" or simply "pipeline") is the foundation of real-time graphics. Its main function is to render a two-dimensional image in relation to a virtual camera, three-dimensional objects (an object that has width, length, and depth), light sources, lighting models, textures and more. === Architecture === The architecture of the real-time rendering pipeline can be divided into conceptual stages: application, geometry and rasterization. === Application stage === The application stage is responsible for generating "scenes", or 3D settings that are drawn to a 2D display. This stage is implemented in software that developers optimize for performance. This stage may perform processing such as collision detection, speed-up techniques, animation and force feedback, in addition to handling user input. Collision detection is an example of an operation that would be performed in the application stage. Collision detection uses algorithms to detect and respond to collisions between (virtual) objects. For example, the application may calculate new positions for the colliding objects and provide feedback via a force feedback device such as a vibrating game controller. The application stage also prepares graphics data for the next stage. This includes texture animation, animation of 3D models, animation via transforms, and geometry morphing. Finally, it produces primitives (points, lines, and triangles) based on scene information and feeds those primitives into the geometry stage of the pipeline. === Geometry stage === The geometry stage manipulates polygons and vertices to compute what to draw, how to draw it and where to draw it. Usually, these operations are performed by specialized hardware or GPUs. Variations across graphics hardware mean that the "geometry stage" may actually be implemented as several consecutive stages. ==== Model and view transformation ==== Before the final model is shown on the output device, the model is transformed onto multiple spaces or coordinate systems. Transformations move and manipulate objects by altering their vertices. Transformation is the general term for the four specific ways that manipulate the shape or position of a point, line or shape. ==== Lighting ==== In order to give the model a more realistic appearance, one or more light sources are usually established during transformation. However, this stage cannot be reached without first transforming the 3D scene into view space. In view space, the observer (camera) is typically placed at the origin. If using a right-handed coordinate system (which is considered standard), the observer looks in the direction of the negative z-axis with the y-axis pointing upwards and the x-axis pointing to the right. ==== Projection ==== Projection is a transformation used to represent a 3D model in a 2D space. The two main types of projection are orthographic projection (also called parallel) and perspective projection. The main characteristic of an orthographic projection is that parallel lines remain parallel after the transformation. Perspective projection utilizes the concept that if the distance between the observer and model increases, the model appears smaller than before. Essentially, perspective projection mimics human sight. ==== Clipping ==== Clipping is the process of removing primitives that are outside of the view box in order to facilitate the rasterizer stage. Once those primitives are removed, the primitives that remain will be drawn into new triangles that reach the next stage. ==== Screen mapping ==== The purpose of screen mapping is to find out the coordinates of the primitives during the clipping stage. ==== Rasterizer stage ==== The rasterizer

  Read more →
• 

  Unfold (app)

  Unfold is a mobile application that allows users to create social media content using a variety of templates and other tools. It was founded in 2018 by Alfonso Cobo and Andy McCune. It enables users to add photos, video, and text with a variety of tools. In 2019, Unfold was acquired by Squarespace. == History == In January 2017, Alfonso Cobo was studying at Parsons School of Design when he realized there was no software or app that could create a portfolio of his work on an iPad. Cobo created an app called Portfolio, a basic version of a portfolio layout app, and the first one to exist for iPad. He launched it in 2017. After launching the first version of Portfolio, Cobo realized the more popular market and use case was on mobile. Around that time, Instagram was launching Stories. As a result, Cobo pivoted the app away from portfolios and instead focused on an app to showcase one's stories. Cobo later contacted Andy McCune, founder of social media account Earth, to collaborate with Unfold. Unfold also partnered with various companies to create custom templates. These include Equinox, Tommy Hilfiger, NARS, Billboard Music Awards, and Product Red. Unfold also launched a collection of Product Red templates to help eliminate HIV/AIDS in several African countries. In 2019, Squarespace acquired Unfold. The Unfold app has been downloaded over 60 million times and has been used to create over 1 billion Instagram stories. == Features == With Unfold, users can utilize hundreds of templates to make social content for social media platforms such as Instagram, Snapchat, and Facebook. The free app offers users basic templates and standard fonts, filters, and stickers, and there are also premium templates available for a monthly subscription. With Unfold+ and Unfold Pro (previously Unfold for Brands), users can access premium templates and tools, as well as upload custom brand assets and fonts. In 2020, Unfold launched Bio Sites, which allows users to link to multiple sites and platforms.

  Read more →
• 

  Blanking (video)

  In analog video, blanking occurs between horizontal lines and between frames. In raster scan equipment, an image is built up by scanning an electron beam from left to right across a screen to produce a visible trace of one scan line, reducing the brightness of the beam to zero (horizontal blanking), moving it back as fast as possible to the left of the screen at a slightly lower position (the next scan line), restoring the brightness, and continuing until all the lines have been displayed and the beam is at the bottom right of the screen. Its intensity is then reduced to zero again (vertical blanking), and it is rapidly moved to the top left to start again, creating the next frame. In television, in particular, the vertical blanking interval is long to accommodate the slow equipment available at the time the standard was set. Fast modern electronics allows digital information to be encoded into the signal during the vertical blanking interval; it is not displayed on screen as the beam is blanked, but can be processed by appropriate circuitry.

  Read more →
• 

  Shape context

  Shape context is a feature descriptor used in object recognition. Serge Belongie and Jitendra Malik proposed the term in their paper "Matching with Shape Contexts" in 2000. == Theory == The shape context is intended to be a way of describing shapes that allows for measuring shape similarity and the recovering of point correspondences. The basic idea is to pick n points on the contours of a shape. For each point pi on the shape, consider the n − 1 vectors obtained by connecting pi to all other points. The set of all these vectors is a rich description of the shape localized at that point but is far too detailed. The key idea is that the distribution over relative positions is a robust, compact, and highly discriminative descriptor. So, for the point pi, the coarse histogram of the relative coordinates of the remaining n − 1 points, h i ( k ) = # { q ≠ p i : ( q − p i ) ∈ bin ( k ) } {\displaystyle h_{i}(k)=\#\{q\neq p_{i}:(q-p_{i})\in {\mbox{bin}}(k)\}} is defined to be the shape context of p i {\displaystyle p_{i}} . The bins are normally taken to be uniform in log-polar space. The fact that the shape context is a rich and discriminative descriptor can be seen in the figure below, in which the shape contexts of two different versions of the letter "A" are shown. (a) and (b) are the sampled edge points of the two shapes. (c) is the diagram of the log-polar bins used to compute the shape context. (d) is the shape context for the point marked with a circle in (a), (e) is that for the point marked as a diamond in (b), and (f) is that for the triangle. As can be seen, since (d) and (e) are the shape contexts for two closely related points, they are quite similar, while the shape context in (f) is very different. For a feature descriptor to be useful, it needs to have certain invariances. In particular it needs to be invariant to translation, scaling, small perturbations, and, depending on the application, rotation. Translational invariance comes naturally to shape context. Scale invariance is obtained by normalizing all radial distances by the mean distance α {\displaystyle \alpha } between all the point pairs in the shape although the median distance can also be used. Shape contexts are empirically demonstrated to be robust to deformations, noise, and outliers using synthetic point set matching experiments. One can provide complete rotational invariance in shape contexts. One way is to measure angles at each point relative to the direction of the tangent at that point (since the points are chosen on edges). This results in a completely rotationally invariant descriptor. But of course this is not always desired since some local features lose their discriminative power if not measured relative to the same frame. Many applications in fact forbid rotational invariance e.g. distinguishing a "6" from a "9". == Use in shape matching == A complete system that uses shape contexts for shape matching consists of the following steps (which will be covered in more detail in the Details of Implementation section): Randomly select a set of points that lie on the edges of a known shape and another set of points on an unknown shape. Compute the shape context of each point found in step 1. Match each point from the known shape to a point on an unknown shape. To minimize the cost of matching, first choose a transformation (e.g. affine, thin plate spline, etc.) that warps the edges of the known shape to the unknown (essentially aligning the two shapes). Then select the point on the unknown shape that most closely corresponds to each warped point on the known shape. Calculate the "shape distance" between each pair of points on the two shapes. Use a weighted sum of the shape context distance, the image appearance distance, and the bending energy (a measure of how much transformation is required to bring the two shapes into alignment). To identify the unknown shape, use a nearest-neighbor classifier to compare its shape distance to shape distances of known objects. == Details of implementation == === Step 1: Finding a list of points on shape edges === The approach assumes that the shape of an object is essentially captured by a finite subset of the points on the internal or external contours on the object. These can be simply obtained using the Canny edge detector and picking a random set of points from the edges. Note that these points need not and in general do not correspond to key-points such as maxima of curvature or inflection points. It is preferable to sample the shape with roughly uniform spacing, though it is not critical. === Step 2: Computing the shape context === This step is described in detail in the Theory section. === Step 3: Computing the cost matrix === Consider two points p and q that have normalized K-bin histograms (i.e. shape contexts) g(k) and h(k). As shape contexts are distributions represented as histograms, it is natural to use the χ2 test statistic as the "shape context cost" of matching the two points: C S = 1 2 ∑ k = 1 K [ g ( k ) − h ( k ) ] 2 g ( k ) + h ( k ) {\displaystyle C_{S}={\frac {1}{2}}\sum _{k=1}^{K}{\frac {[g(k)-h(k)]^{2}}{g(k)+h(k)}}} The values of this range from 0 to 1. In addition to the shape context cost, an extra cost based on the appearance can be added. For instance, it could be a measure of tangent angle dissimilarity (particularly useful in digit recognition): C A = 1 2 ‖ ( cos ⁡ ( θ 1 ) sin ⁡ ( θ 1 ) ) − ( cos ⁡ ( θ 2 ) sin ⁡ ( θ 2 ) ) ‖ {\displaystyle C_{A}={\frac {1}{2}}{\begin{Vmatrix}{\dbinom {\cos(\theta _{1})}{\sin(\theta _{1})}}-{\dbinom {\cos(\theta _{2})}{\sin(\theta _{2})}}\end{Vmatrix}}} This is half the length of the chord in unit circle between the unit vectors with angles θ 1 {\displaystyle \theta _{1}} and θ 2 {\displaystyle \theta _{2}} . Its values also range from 0 to 1. Now the total cost of matching the two points could be a weighted-sum of the two costs: C = ( 1 − β ) C S + β C A {\displaystyle C=(1-\beta )C_{S}+\beta C_{A}\!\,} Now for each point pi on the first shape and a point qj on the second shape, calculate the cost as described and call it Ci,j. This is the cost matrix. === Step 4: Finding the matching that minimizes total cost === Now, a one-to-one matching π ( i ) {\displaystyle \pi (i)} that matches each point pi on shape 1 and qj on shape 2 that minimizes the total cost of matching, H ( π ) = ∑ i C ( p i , q π ( i ) ) {\displaystyle H(\pi )=\sum _{i}C\left(p_{i},q_{\pi (i)}\right)} is needed. This can be done in O ( N 3 ) {\displaystyle O(N^{3})} time using the Hungarian method, although there are more efficient algorithms. To have robust handling of outliers, one can add "dummy" nodes that have a constant but reasonably large cost of matching to the cost matrix. This would cause the matching algorithm to match outliers to a "dummy" if there is no real match. === Step 5: Modeling transformation === Given the set of correspondences between a finite set of points on the two shapes, a transformation T : R 2 → R 2 {\displaystyle T:\mathbb {R} ^{2}\to \mathbb {R} ^{2}} can be estimated to map any point from one shape to the other. There are several choices for this transformation, described below. ==== Affine ==== The affine model is a standard choice: T ( p ) = A p + o {\displaystyle T(p)=Ap+o\!} . The least squares solution for the matrix A {\displaystyle A} and the translational offset vector o is obtained by: o = 1 n ∑ i = 1 n ( p i − q π ( i ) ) , A = ( Q + P ) t {\displaystyle o={\frac {1}{n}}\sum _{i=1}^{n}\left(p_{i}-q_{\pi (i)}\right),A=(Q^{+}P)^{t}} Where P = ( 1 p 11 p 12 ⋮ ⋮ ⋮ 1 p n 1 p n 2 ) {\displaystyle P={\begin{pmatrix}1&p_{11}&p_{12}\\\vdots &\vdots &\vdots \\1&p_{n1}&p_{n2}\end{pmatrix}}} with a similar expression for Q {\displaystyle Q\!} . Q + {\displaystyle Q^{+}\!} is the pseudoinverse of Q {\displaystyle Q\!} . ==== Thin plate spline ==== The thin plate spline (TPS) model is the most widely used model for transformations when working with shape contexts. A 2D transformation can be separated into two TPS function to model a coordinate transform: T ( x , y ) = ( f x ( x , y ) , f y ( x , y ) ) {\displaystyle T(x,y)=\left(f_{x}(x,y),f_{y}(x,y)\right)} where each of the ƒx and ƒy have the form: f ( x , y ) = a 1 + a x x + a y y + ∑ i = 1 n ω i U ( ‖ ( x i , y i ) − ( x , y ) ‖ ) , {\displaystyle f(x,y)=a_{1}+a_{x}x+a_{y}y+\sum _{i=1}^{n}\omega _{i}U\left({\begin{Vmatrix}(x_{i},y_{i})-(x,y)\end{Vmatrix}}\right),} and the kernel function U ( r ) {\displaystyle U(r)\!} is defined by U ( r ) = r 2 log ⁡ r 2 {\displaystyle U(r)=r^{2}\log r^{2}\!} . The exact details of how to solve for the parameters can be found elsewhere but it essentially involves solving a linear system of equations. The bending energy (a measure of how much transformation is needed to align the points) will also be easily obtained. ==== Regularized TPS ==== The TPS formulation above has exact matching requirement for the pairs of points on the two shapes. For noisy data, it is best to

  Read more →
• 

  Outline of databases

  The following is provided as an overview of and topical guide to databases: Database – organized collection of data, today typically in digital form. The data are typically organized to model relevant aspects of reality (for example, the availability of rooms in hotels), in a way that supports processes requiring this information (for example, finding a hotel with vacancies). == What type of things are databases? == Databases can be described as all of the following: Information – sequence of symbols that can be interpreted as a message. Information can be recorded as signs, or transmitted as signals. Data – values of qualitative or quantitative variables, belonging to a set of items. Data in computing (or data processing) are often represented by a combination of items organized in rows and multiple variables organized in columns. Data are typically the results of measurements and can be visualised using graphs or images. Computer data – information in a form suitable for use with a computer. Data is often distinguished from programs. A program is a sequence of instructions that detail a task for the computer to perform. In this sense, data is everything in software that is not program code. == Types of databases == Active database – Database with event driven features Animation database – Database for storing and reusing animation fragments or motion capture data Back-end database – Organized collection of data in computingPages displaying short descriptions of redirect targets Bibliographic database – database of bibliographic records, an organized digital collection of references to published literature, including journal and newspaper articles, conference proceedings, reports, government and legal publications, patents, books, etc. Centralized database – database located and maintained in one location, unlike a distributed database. Cloud database – Database running on a cloud computing platform Collection database – collection catalog of a museum or archive implemented using a computerized database, in which the institution's objects or material are catalogued. Collective Optimization Database – open repository to enable sharing of benchmarks, data sets and optimization cases from the community, provide web services and Plug-in (computing)|plugins to analyze optimization data and predict program transformations or better hardware designs for multi-objective optimizations based on statistical and machine learning techniques provided there is enough information collected in the repository from multiple users. Configuration management database – Database used to store info on hardware and software assets Cooperative database – holds information on customers and their transactions. Current database – conventional database that stores data that is valid now. Directory – repository or database of information which is optimized for reading, under the assumption that data updates are very rare compared to data reads. Commonly, a directory supports search and browsing in addition to simple lookups. Distributed database – database in which storage devices are not all attached to a common CPU. Document-oriented database – computer program designed for storing, retrieving, and managing document-oriented, or Semi-structured model|semi structured data, information. EDA database – database specialized for the purpose of electronic design automation. Endgame tablebase – computerized database that contains precalculated exhaustive analysis of a chess endgame position. Food composition database (FCDB) – provides detailed information on the nutritional composition of foods. Full-text database – database that contains the complete text of books, dissertations, journals, magazines, newspapers or other kinds of textual documents. Also called a "complete-text database". Government database – collects personal information for various reasons (mass surveillance, Schengen Information System in the European Union, social security, statistics, etc.). Graph database – uses graph structures with nodes, edges, and properties to represent and store data. Knowledge base – special kind of database for knowledge management. A knowledge base provides a means for information to be collected, organised, shared, searched and utilised. Mobile database – can be connected to by a mobile computing device over a mobile network. Navigational database – database in which objects (or records) in it are found primarily by following references from other objects. Non-native speech database – speech database of non-native pronunciations of English. Online database – database accessible from a network, including from the Internet. Operational database – accessed by an Operational System to carry out regular operations of an organization. Parallel database – improves performance through parallelization of various operations, such as loading data, building indexes and evaluating queries. Probabilistic database – uncertain database in which the possible worlds have associated probabilities. Real-time database – processing system designed to handle workloads whose state is constantly changing (Buchmann). Relational database – collection of data items organized as a set of formally described tables from which data can be accessed easily. Spatial database – database that is optimized to store and query data that is related to objects in space, including points, lines and polygons. Temporal database – database with built-in time aspects, for example a temporal data model and a temporal version of Structured Query Language (SQL). Time series database – a time series is an associative array of numbers indexed by a datetime or a datetime range. These time series are often called profiles or curves, depending upon the market. A time series of stock prices might be called a price curve, or a time series of energy consumption might be called a load profile. Despite the disparate naming, the operations performed on them are sufficiently common as to demand special database treatment. Triplestore – purpose-built database for the storage and retrieval of triples, a triple being a data entity composed of subject-predicate-object, like "Bob is 35" or "Bob knows Fred". Very large database (VLDB) – contains an extremely high number of tuples (database rows), or occupies an extremely large physical filesystem storage space. Vulnerability database – platform aimed at collecting, maintaining, and disseminating information about discovered vulnerabilities targeting real computer systems. XLDB – Stands for "eXtremely Large Data Base". XML database – data stored in XML format, where it can be queried, exported and serialized into the desired format. == History of databases == History of databases – History of database management systems –: == Database use == Database usage requirements – Database theory – encapsulates a broad range of topics related to the study and research of the theoretical realm of databases and database management systems. Database machine – or is a computer or special hardware that stores and retrieves data from a database. Also called a "back end processor" Database server – computer program that provides database services to other computer programs or computers, as defined by the client-server model. Database application – computer program whose primary purpose is entering and retrieving information from a computer-managed database. Database management system (DBMS) – software package with computer programs that control the creation, maintenance, and use of a database. Database connection – facility in computer science that allows client software to communicate with database server software, whether on the same machine or not. Datasource – name given to the connection set up to a database from a server. The name is commonly used when creating a query to the database. The Database Source Name (DSN) does not have to be the same as the filename for the database. For example, a database file named "friends.mdb" could be set up with a DSN of "school". Then DSN "school" would then be used to refer to the database when performing a query. Data Source Name (DSN) – are data structures used to describe a connection to a data source. Sometimes known as a database source name though data sources are not limited to databases. Database administrator (DBA) – is a person responsible for the installation, configuration, upgrade, administration, monitoring and maintenance of physical databases. Lock – Comparison of database tools – (provides tables for comparing general and technical information for a number of available database administrator tools.) Database-centric architecture – software architectures in which databases play a crucial role. Also called "data-centric architecture". Intelligent database – was put forward as a system that manages information (rather than data) in a way that appears natural to users and which goes beyond simple record keeping. Two-phase locking (2PL) – is a

  Read more →
• 

  Zé Delivery

  Zé Delivery is a startup developed by Brazilian drinks company AmBev which offers an app for delivering drinks. The app is available for Android and iOS. Created in 2016 by AmBev's ZX Ventures hub, the service has an international presence in Argentina, Paraguay, Bolivia, Panama and the Dominican Republic. It is also present in more than 300 Brazilian cities. Because it has an extensive category of alcoholic beverages, the service is only used by people over 18. It also offers soft drinks, juices, energy drinks and other non-alcoholic beverages.

  Read more →