AI Headshot Generator

AI Headshot Generator — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

• 

  AI Overviews

  AI Overviews is an artificial intelligence (AI) feature integrated into Google Search that produces AI-generated summaries of search results. The feature has been criticized for its inaccuracy and for reducing website traffic. == History and development == AI Overviews were first introduced as part of Google's Search Generative Experience (SGE), which was unveiled at the Google I/O conference in May 2023. In May 2024 at Google I/O 2024, the feature was rebranded as AI Overviews and launched in the United States. The introduction of AI Overviews was seen as a strategic move to compete with other generative AI advancements, including OpenAI's ChatGPT. By August 2024, AI Overviews was rolled out to several other countries, including the United Kingdom, India, Japan, Brazil, Mexico, and Indonesia, with support for multiple languages. In October 2024, Google expanded the feature globally, making it available in over 100 countries. In December 2024, Botify x Demandsphere released findings stating that when AI Overviews and featured snippets appear together on the search engine results page, they take up approximately 67.1% of the screen on desktop and 75.7% on mobile. Even if content is ranking in the #1 position, it may not be visible to consumers if other visual elements on the results page are more prominent. In March 2025, Google started testing an "AI Mode", where the search results page is AI-generated. The company was also considering adding advertisements to the AI Mode, as they already exist in AI Overviews. As of May 2025, AI Overviews are available in over 200 countries and territories and in more than 40 languages. As of March 2026, Google AI Overviews appear on more than 48% of total Google Search queries, compared to just 6.49% in the previous year (58% year-over-year growth). == Functionality == The AI Overviews feature uses large language models to generate summaries from web content. The overviews are designed to be concise, providing a snapshot of relevant information about the queried topic. Google allows users to adjust the language complexity in summaries, offering both simplified and detailed options. The overviews also include links to sources. According to a June 2025 study by Semrush, the most cited source is Quora, followed by Reddit. == Reception == The feature has faced criticism for inaccuracies, including instances where erroneous or nonsensical content was generated. Depending on what is searched for, the overview may also consist of hallucinated content, such as when searching for idioms that do not exist. In May 2024, Google temporarily restricted the AI tool after it provided suggestions that were seen as nonsensical and harmful, such as telling users to eat rocks or apply glue on pizza. Concerns were also raised by content publishers, who feared a decline in web traffic as users relied on the summaries instead of visiting source websites. A Google patent from 2026 raised the concern of webmasters that Google could entirely replace the landing page of websites by an AI optimized copy of the website in its results. There is also apprehension about the ethical implications of AI-driven content aggregation, including its impact on intellectual property rights and the visibility of smaller content providers. The European Commission announced in December 2025 that they were investigating whether AI Overviews breached European competition law. In response, Google has stated its commitment to improve content validation and refine the algorithms used to filter unreliable information. Google implemented measures to prioritize link placement within AI Overviews, aiming to balance user convenience with the needs of content creators. In January 2026, Google restricted AI Overviews on certain health-related searches following an investigation by The Guardian. == Lawsuits == On February 24, 2025, Chegg sued Alphabet over the AI Overviews feature, claiming that it was leading to students preferring "low-quality, unverified AI summaries", thus violating antitrust law. Chegg also said it was considering either a sale or a take-private transaction. In September 2025, Penske Media Corporation, the publisher of Rolling Stone and The Hollywood Reporter, sued Google, claiming that AI Overviews illegally regurgitate content from their websites and drive off potential site visitors by always appearing on top of the search results while leaving little incentive to see the linked sources. The company stated that "the future of digital media and [...] its integrity [...] is threatened by Google's current actions", alleging that 20% of searches that link to Penske-owned websites show AI Overviews and that the figure is expected to rise. Google spokesperson José Castañeda called the claims "meritless" and stated that "AI Overviews send traffic to a greater diversity of sites." In 2026, Canadian musician Ashley MacIsaac filed a lawsuit against Google claiming that the AI Overview feature had wrongly stated that MacIsaac had been convicted of numerous criminal offences and was on the sex offender registry. He claims this incorrect information led to the cancellation of a December 2025 gig organized by the Sipekne'katik First Nation.

  Read more →
• 

  Homogeneity blockmodeling

  In mathematics applied to analysis of social structures, homogeneity blockmodeling is an approach in blockmodeling, which is best suited for a preliminary or main approach to valued networks, when a prior knowledge about these networks is not available. This is because homogeneity blockmodeling emphasizes the similarity of link (tie) strengths within the blocks over the pattern of links. In this approach, tie (link) values (or statistical data computed on them) are assumed to be equal (homogenous) within blocks. This approach to the generalized blockmodeling of valued networks was first proposed by Aleš Žiberna in 2007 with the basic idea, "that the inconsistency of an empirical block with its ideal block can be measured by within block variability of appropriate values". The newly–formed ideal blocks, which are appropriate for blockmodeling of valued networks, are then presented together with the definitions of their block inconsistencies. Similar approach to the homogeneity blockmodeling, dealing with direct approach for structural equivalence, was previously suggested by Stephen P. Borgatti and Martin G. Everett (1992).

  Read more →
• 

  (1+ε)-approximate nearest neighbor search

  (1+ε)-approximate nearest neighbor search is a variant of the nearest neighbor search problem. A solution to the (1+ε)-approximate nearest neighbor search is a point or multiple points within distance (1+ε) R from a query point, where R is the distance between the query point and its true nearest neighbor. Reasons to approximate nearest neighbor search include the space and time costs of exact solutions in high-dimensional spaces (see curse of dimensionality) and that in some domains, finding an approximate nearest neighbor is an acceptable solution. Approaches for solving (1+ε)-approximate nearest neighbor search include k-d trees, locality-sensitive hashing and brute-force search.

  Read more →
• 

  Statistical classification

  When classification is performed by a computer, statistical methods are normally used to develop the algorithm. Often, the individual observations are analyzed into a set of quantifiable properties, known variously as explanatory variables or features. These properties may variously be categorical (e.g. "A", "B", "AB" or "O", for blood type), ordinal (e.g. "large", "medium" or "small"), integer-valued (e.g. the number of occurrences of a particular word in an email) or real-valued (e.g. a measurement of blood pressure). Other classifiers work by comparing observations to previous observations by means of a similarity or distance function. An algorithm that implements classification, especially in a concrete implementation, is known as a classifier. The term "classifier" sometimes also refers to the mathematical function, implemented by a classification algorithm, that maps input data to a category. Terminology across fields is quite varied. In statistics, where classification is often done with logistic regression or a similar procedure, the properties of observations are termed explanatory variables (or independent variables, regressors, etc.), and the categories to be predicted are known as outcomes, which are considered to be possible values of the dependent variable. In machine learning, the observations are often known as instances, the explanatory variables are termed features (grouped into a feature vector), and the possible categories to be predicted are classes. Other fields may use different terminology: e.g. in community ecology, the term "classification" normally refers to cluster analysis. == Relation to other problems == Classification and clustering are examples of the more general problem of pattern recognition, which is the assignment of some sort of output value to a given input value. Other examples are regression, which assigns a real-valued output to each input; sequence labeling, which assigns a class to each member of a sequence of values (for example, part of speech tagging, which assigns a part of speech to each word in an input sentence); parsing, which assigns a parse tree to an input sentence, describing the syntactic structure of the sentence; etc. A common subclass of classification is probabilistic classification. Algorithms of this nature use statistical inference to find the best class for a given instance. Unlike other algorithms, which simply output a "best" class, probabilistic algorithms output a probability of the instance being a member of each of the possible classes. The best class is normally then selected as the one with the highest probability. However, such an algorithm has numerous advantages over non-probabilistic classifiers: It can output a confidence value associated with its choice (in general, a classifier that can do this is known as a confidence-weighted classifier). Correspondingly, it can abstain when its confidence of choosing any particular output is too low. Because of the probabilities which are generated, probabilistic classifiers can be more effectively incorporated into larger machine-learning tasks, in a way that partially or completely avoids the problem of error propagation. == Frequentist procedures == Early work on statistical classification was undertaken by Fisher, in the context of two-group problems, leading to Fisher's linear discriminant function as the rule for assigning a group to a new observation. This early work assumed that data-values within each of the two groups had a multivariate normal distribution. The extension of this same context to more than two groups has also been considered with a restriction imposed that the classification rule should be linear. Later work for the multivariate normal distribution allowed the classifier to be nonlinear: several classification rules can be derived based on different adjustments of the Mahalanobis distance, with a new observation being assigned to the group whose centre has the lowest adjusted distance from the observation. == Bayesian procedures == Unlike frequentist procedures, Bayesian classification procedures provide a natural way of taking into account any available information about the relative sizes of the different groups within the overall population. Bayesian procedures tend to be computationally expensive and, in the days before Markov chain Monte Carlo computations were developed, approximations for Bayesian clustering rules were devised. Some Bayesian procedures involve the calculation of group-membership probabilities: these provide a more informative outcome than a simple attribution of a single group-label to each new observation. == Binary and multiclass classification == Classification can be thought of as two separate problems – binary classification and multiclass classification. In binary classification, a better understood task, only two classes are involved, whereas multiclass classification involves assigning an object to one of several classes. Since many classification methods have been developed specifically for binary classification, multiclass classification often requires the combined use of multiple binary classifiers. == Feature vectors == Most algorithms describe an individual instance whose category is to be predicted using a feature vector of individual, measurable properties of the instance. Each property is termed a feature, also known in statistics as an explanatory variable (or independent variable, although features may or may not be statistically independent). Features may variously be binary (e.g. "on" or "off"); categorical (e.g. "A", "B", "AB" or "O", for blood type); ordinal (e.g. "large", "medium" or "small"); integer-valued (e.g. the number of occurrences of a particular word in an email); or real-valued (e.g. a measurement of blood pressure). If the instance is an image, the feature values might correspond to the pixels of an image; if the instance is a piece of text, the feature values might be occurrence frequencies of different words. Some algorithms work only in terms of discrete data and require that real-valued or integer-valued data be discretized into groups (e.g. less than 5, between 5 and 10, or greater than 10). == Linear classifiers == A large number of algorithms for classification can be phrased in terms of a linear function that assigns a score to each possible category k by combining the feature vector of an instance with a vector of weights, using a dot product. The predicted category is the one with the highest score. This type of score function is known as a linear predictor function and has the following general form: score ⁡ ( X i , k ) = β k ⋅ X i , {\displaystyle \operatorname {score} (\mathbf {X} _{i},k)={\boldsymbol {\beta }}_{k}\cdot \mathbf {X} _{i},} where Xi is the feature vector for instance i, βk is the vector of weights corresponding to category k, and score(Xi, k) is the score associated with assigning instance i to category k. In discrete choice theory, where instances represent people and categories represent choices, the score is considered the utility associated with person i choosing category k. Algorithms with this basic setup are known as linear classifiers. What distinguishes them is the procedure for determining (training) the optimal weights/coefficients and the way that the score is interpreted. Examples of such algorithms include Logistic regression – Statistical model for a binary dependent variable Multinomial logistic regression – Regression for more than two discrete outcomes Probit regression – Statistical regression where the dependent variable can take only two valuesPages displaying short descriptions of redirect targets The perceptron algorithm Support vector machine – Set of methods for supervised statistical learning Linear discriminant analysis – Method used in statistics, pattern recognition, and other fields == Algorithms == Since no single form of classification is appropriate for all data sets, a large toolkit of classification algorithms has been developed. The most commonly used include: Artificial neural networks – Computational model used in machine learningPages displaying short descriptions of redirect targets Boosting (machine learning) – Ensemble learning method Random forest – Tree-based ensemble machine learning methods Genetic programming – Evolving computer programs with techniques analogous to natural genetic processes Gene expression programming – Evolutionary algorithm Multi expression programming Linear genetic programming Kernel estimation – Concept in statisticsPages displaying short descriptions of redirect targets k-nearest neighbor – Non-parametric classification methodPages displaying short descriptions of redirect targets Learning vector quantization Linear classifier – Statistical classification in machine learning Fisher's linear discriminant – Method used in statistics, pattern recognition, and other fieldsPages displaying short descriptions of redirect targets Logistic r

  Read more →
• 

  T-pose

  In computer animation, a T-pose is a default posing for a humanoid 3D model's skeleton before it is animated. It is called so because of its shape: the straight legs and arms of a humanoid model combine to form a capital letter T. When the arms are angled downwards, the pose is sometimes referred to as an A-pose instead. Likewise, if the arms are angled upward, it is called a Y-pose. Generic terms encompassing all these (especially for non-humanoid models) include bind pose, blind pose, and reference pose. == Usage == The T-pose is primarily used as the default armature pose for skeletal animation in 3D software, which is then manipulated to create animation. The purpose of the T-pose relates to the important elements of the body being axis-aligned, thereby making it easier to rig the model for animation, physics, and other controls. Depending on the exact geometry of the model, other poses such as the A-pose may be more suitable for vertex deformation around areas such as the shoulders. Outside of being default poses in animation software, T-poses are typically used as placeholders for animation not yet completed, particularly in 3D animated video games. In some motion capture software, a T-pose must be assumed by the actor in the motion capture suit before motion capturing can begin. There are other poses used, but the T-pose is the most common one. == As an Internet meme == Starting in 2016 and resurfacing in 2017, the T-pose has become a widespread Internet meme due to its bizarre and somewhat comedic appearance, especially in video game glitches where a character's animation is unexpectedly supplanted by a T-pose. In a prerelease video of the game NBA Elite 11, the demo was filled with glitches, notably one unintentionally showing a T-pose in place of the proper animation for the model of player Andrew Bynum. The glitch later gained fame as the "Jesus Bynum glitch". Publisher EA eventually cancelled the game as they found it unsatisfactory. A similar occurrence happened with Cyberpunk 2077. In the 2023 Formula One season, driver George Russell performed a T-pose in the opening credits of the series' TV broadcasts. This quickly became a meme within the motorsports community. Russell repeated the pose after claiming pole position at the 2024 Canadian Grand Prix and winning the 2024 Austrian Grand Prix.

  Read more →
• 

  T-distributed stochastic neighbor embedding

  t-distributed stochastic neighbor embedding (t-SNE) is a statistical method for visualizing high-dimensional data by giving each datapoint a location in a two or three-dimensional map. It is based on Stochastic Neighbor Embedding originally developed by Geoffrey Hinton and Sam Roweis, where Laurens van der Maaten and Hinton proposed the t-distributed variant. It is a nonlinear dimensionality reduction technique for embedding high-dimensional data for visualization in a low-dimensional space of two or three dimensions. Specifically, it models each high-dimensional object by a two- or three-dimensional point in such a way that similar objects are modeled by nearby points and dissimilar objects are modeled by distant points with high probability. The t-SNE algorithm comprises two main stages. First, t-SNE constructs a probability distribution over pairs of high-dimensional objects in such a way that similar objects are assigned a higher probability while dissimilar points are assigned a lower probability. Second, t-SNE defines a similar probability distribution over the points in the low-dimensional map, and it minimizes the Kullback–Leibler divergence (KL divergence) between the two distributions with respect to the locations of the points in the map. While the original algorithm uses the Euclidean distance between objects as the base of its similarity metric, this can be changed as appropriate. A Riemannian variant is UMAP. t-SNE has been used for visualization in a wide range of applications, including genomics, computer security research, natural language processing, music analysis, cancer research, bioinformatics, geological domain interpretation, and biomedical signal processing. For a data set with n {\displaystyle n} elements, t-SNE runs in O ( n 2 ) {\displaystyle O(n^{2})} time and requires O ( n 2 ) {\displaystyle O(n^{2})} space. == Details == Given a set of N {\displaystyle N} high-dimensional objects x 1 , … , x N {\displaystyle \mathbf {x} _{1},\dots ,\mathbf {x} _{N}} , t-SNE first computes probabilities p i j {\displaystyle p_{ij}} that are proportional to the similarity of objects x i {\displaystyle \mathbf {x} _{i}} and x j {\displaystyle \mathbf {x} _{j}} , as follows. For i ≠ j {\displaystyle i\neq j} , define p j ∣ i = exp ⁡ ( − ‖ x i − x j ‖ 2 / 2 σ i 2 ) ∑ k ≠ i exp ⁡ ( − ‖ x i − x k ‖ 2 / 2 σ i 2 ) {\displaystyle p_{j\mid i}={\frac {\exp(-\lVert \mathbf {x} _{i}-\mathbf {x} _{j}\rVert ^{2}/2\sigma _{i}^{2})}{\sum _{k\neq i}\exp(-\lVert \mathbf {x} _{i}-\mathbf {x} _{k}\rVert ^{2}/2\sigma _{i}^{2})}}} and set p i ∣ i = 0 {\displaystyle p_{i\mid i}=0} . Note the above denominator ensures ∑ j p j ∣ i = 1 {\displaystyle \sum _{j}p_{j\mid i}=1} for all i {\displaystyle i} . As van der Maaten and Hinton explained: "The similarity of datapoint x j {\displaystyle x_{j}} to datapoint x i {\displaystyle x_{i}} is the conditional probability, p j | i {\displaystyle p_{j|i}} , that x i {\displaystyle x_{i}} would pick x j {\displaystyle x_{j}} as its neighbor if neighbors were picked in proportion to their probability density under a Gaussian centered at x i {\displaystyle x_{i}} ." Now define p i j = p j ∣ i + p i ∣ j 2 N {\displaystyle p_{ij}={\frac {p_{j\mid i}+p_{i\mid j}}{2N}}} This is motivated because p i {\displaystyle p_{i}} and p j {\displaystyle p_{j}} from the N samples are estimated as 1/N, so the conditional probability can be written as p i ∣ j = N p i j {\displaystyle p_{i\mid j}=Np_{ij}} and p j ∣ i = N p j i {\displaystyle p_{j\mid i}=Np_{ji}} . Since p i j = p j i {\displaystyle p_{ij}=p_{ji}} , you can obtain previous formula. Also note that p i i = 0 {\displaystyle p_{ii}=0} and ∑ i , j p i j = 1 {\displaystyle \sum _{i,j}p_{ij}=1} . The bandwidth of the Gaussian kernels σ i {\displaystyle \sigma _{i}} is set in such a way that the entropy of the conditional distribution equals a predefined entropy using the bisection method. As a result, the bandwidth is adapted to the density of the data: smaller values of σ i {\displaystyle \sigma _{i}} are used in denser parts of the data space. The entropy increases with the perplexity of this distribution P i {\displaystyle P_{i}} ; this relation is seen as P e r p ( P i ) = 2 H ( P i ) {\displaystyle Perp(P_{i})=2^{H(P_{i})}} where H ( P i ) {\displaystyle H(P_{i})} is the Shannon entropy H ( P i ) = − ∑ j p j | i log 2 ⁡ p j | i . {\displaystyle H(P_{i})=-\sum _{j}p_{j|i}\log _{2}p_{j|i}.} The perplexity is a hand-chosen parameter of t-SNE, and as the authors state, "perplexity can be interpreted as a smooth measure of the effective number of neighbors. The performance of SNE is fairly robust to changes in the perplexity, and typical values are between 5 and 50.". Since the Gaussian kernel uses the Euclidean distance ‖ x i − x j ‖ {\displaystyle \lVert x_{i}-x_{j}\rVert } , it is affected by the curse of dimensionality, and in high dimensional data when distances lose the ability to discriminate, the p i j {\displaystyle p_{ij}} become too similar (asymptotically, they would converge to a constant). It has been proposed to adjust the distances with a power transform, based on the intrinsic dimension of each point, to alleviate this. t-SNE aims to learn a d {\displaystyle d} -dimensional map y 1 , … , y N {\displaystyle \mathbf {y} _{1},\dots ,\mathbf {y} _{N}} (with y i ∈ R d {\displaystyle \mathbf {y} _{i}\in \mathbb {R} ^{d}} and d {\displaystyle d} typically chosen as 2 or 3) that reflects the similarities p i j {\displaystyle p_{ij}} as well as possible. To this end, it measures similarities q i j {\displaystyle q_{ij}} between two points in the map y i {\displaystyle \mathbf {y} _{i}} and y j {\displaystyle \mathbf {y} _{j}} , using a very similar approach. Specifically, for i ≠ j {\displaystyle i\neq j} , define q i j {\displaystyle q_{ij}} as q i j = ( 1 + ‖ y i − y j ‖ 2 ) − 1 ∑ k ∑ l ≠ k ( 1 + ‖ y k − y l ‖ 2 ) − 1 {\displaystyle q_{ij}={\frac {(1+\lVert \mathbf {y} _{i}-\mathbf {y} _{j}\rVert ^{2})^{-1}}{\sum _{k}\sum _{l\neq k}(1+\lVert \mathbf {y} _{k}-\mathbf {y} _{l}\rVert ^{2})^{-1}}}} and set q i i = 0 {\displaystyle q_{ii}=0} . Herein a heavy-tailed Student t-distribution (with one-degree of freedom, which is the same as a Cauchy distribution) is used to measure similarities between low-dimensional points in order to allow dissimilar objects to be modeled far apart in the map. The locations of the points y i {\displaystyle \mathbf {y} _{i}} in the map are determined by minimizing the (non-symmetric) Kullback–Leibler divergence of the distribution P {\displaystyle P} from the distribution Q {\displaystyle Q} , that is: K L ( P ∥ Q ) = ∑ i ≠ j p i j log ⁡ p i j q i j {\displaystyle \mathrm {KL} \left(P\parallel Q\right)=\sum _{i\neq j}p_{ij}\log {\frac {p_{ij}}{q_{ij}}}} The minimization of the Kullback–Leibler divergence with respect to the points y i {\displaystyle \mathbf {y} _{i}} is performed using gradient descent. The result of this optimization is a map that reflects the similarities between the high-dimensional inputs. == Output == While t-SNE plots often seem to display clusters, the visual clusters can be strongly influenced by the chosen parameterization (especially the perplexity) and so a good understanding of the parameters for t-SNE is needed. Such "clusters" can be shown to even appear in structured data with no clear clustering, and so may be false findings. Similarly, the size of clusters produced by t-SNE is not informative, and neither is the distance between clusters. Thus, interactive exploration may be needed to choose parameters and validate results. It has been shown that t-SNE can often recover well-separated clusters, and with special parameter choices, approximates a simple form of spectral clustering. == Software == A C++ implementation of Barnes-Hut is available on the github account of one of the original authors. The R package Rtsne implements t-SNE in R. ELKI contains tSNE, also with Barnes-Hut approximation scikit-learn, a popular machine learning library in Python implements t-SNE with both exact solutions and the Barnes-Hut approximation. Tensorboard, the visualization kit associated with TensorFlow, also implements t-SNE (online version) The Julia package TSne implements t-SNE

  Read more →
• 

  International Conference on Acoustics, Speech, and Signal Processing

  ICASSP, the International Conference on Acoustics, Speech, and Signal Processing, is an annual flagship conference organized by IEEE Signal Processing Society. Ei Compendex has indexed all papers included in its proceedings. The first ICASSP was held in 1976 in Philadelphia, Pennsylvania, based on the success of a conference in Massachusetts four years earlier that had focused specifically on speech signals. As ranked by Google Scholar's h-index metric in 2016, ICASSP has the highest h-index of any conference in the Signal Processing field. The Brazilian ministry of education gave the conference an 'A1' rating based on its h-index. == Conference list ==

  Read more →
• 

  Lattice Miner

  Lattice Miner is a formal concept analysis software tool for the construction, visualization and manipulation of concept lattices. It allows the generation of formal concepts and association rules as well as the transformation of formal contexts via apposition, subposition, reduction and object/attribute generalization, and the manipulation of concept lattices via approximation, projection and selection. Lattice Miner allows also the drawing of nested line diagrams. == Introduction == Formal concept analysis (FCA) is a branch of applied mathematics based on the formalization of concept and concept hierarchy and mainly used as a framework for conceptual clustering and rule mining. Over the last two decades, a collection of tools have emerged to help FCA users visualize and analyze concept lattices. They range from the earliest DOS-based implementations (e.g., ConImp and GLAD) to more recent implementations in Java like ToscanaJ, Galicia, ConExp and Coron. A main issue in the development of FCA tools is to visualize large concept lattices and provide efficient mechanisms to highlight patterns (e.g., concepts, associations) that could be relevant to the user. The initial objective of the FCA tool called Lattice Miner was to focus on visualization mechanisms for the representation of concept lattices, including nested line diagrams. Later on, many other interesting features were integrated into the tool. == Functional architecture of Lattice Miner == Lattice Miner is a Java-based platform whose functions are articulated around a core. The Lattice Miner core provides all low-level operations and structures for the representation and manipulation of contexts, lattices and association rules. Mainly, the core of Lattice Miner consists of three modules: context, concept and association rule modules. The user interface offers a context editor and concept lattice manipulator to assist the user in a set of tasks. The architecture of Lattice Miner is open and modular enough to allow the integration of new features and facilities in each one of its components. === Context module === The context module offers all the basic operations and structures to manipulate binary and valued contexts as well as context decomposition to produce nested line diagrams. Basic context operations include apposition, subposition, generalization, clarification, reduction as well as the complementary context computation. The module provides also the arrow relations (for context reduction and decomposition) [2]. The tool has an input LMB format and recognizes the binary format SLF found in Galicia and the format CEX produced by ConExp. === Concept module === The main function of the concept module is to generate the concepts of the current binary context and construct the corresponding lattice and nested structure (see Figures 2 and 3). It provides the user with basic operators such as projection, selection, and exact search as well as advanced features like pair approximation. Some known algorithms are included in this module such as Bordat’s procedure, Godin’s algorithm and NextClosure algorithm. The approximation feature implemented in Lattice Miner is based on the following idea: given a pair (X,Y) where X ⊆ G, and Y ⊆ M, is there a set of formal concepts (Ai,Bi) which are “close to” (X,Y)? To answer this question, The tool starts to identify the type of couple that the pair (X,Y) represents. It can be a formal concept, a protoconcept, a semiconcept or a preconcept. In the last case, the approximation is given by the interval [(X",X′),(Y′,Y")] and highlighted in the line diagram. === Association rule module === This module includes procedures for computing the (stem) Guigues–Duquenne base using NextClosure algorithm [3], as well as the generic and informative bases. Implications with negation can be obtained using the apposition of a context and its complementary. This module embeds also procedures for the computation of a non-redundant family C of implications and the closure of a set Y of attributes for the given implication set C. === User interface === The initial objective of Lattice Miner was to focus on lattice drawing and visualization either as a flat or nested structure by taking into account the cognitive process of human beings and known principles for lattice drawing (e.g., reducing the number of edge intersections, ensuring diagram symmetry). Some well-known visualization techniques were implemented such as focus & context and fisheye view. The basic idea behind focus & context visualization paradigm is to allow a viewer to see key (important) objects in full detail in the foreground (focus) while at the same time an overview of all the surrounding information (context) remains available in the background. Lattice Miner translates the focus & context paradigm into clear and blurred elements while the size of nodes and the intensity of their color were used to indicate their importance. Various forms of highlighting, labelling and animation are also provided. In order to better handle the display of large lattices, nested line diagrams are offered in the tool. Figure 3 shows the third level of the nested line diagram corresponding to the binary context of Figure 1 where three levels of nesting are defined. Each one of the inner nodes of this diagram represents a combination of attributes from the previous two (outer) levels. Real inner concepts (see the node on the left hand-side of the diagram) are identified by colored nodes while void elements are in grey color. Each node of levels 1 and 2 can be expanded to exhibit its internal line diagram. Both flat and nested diagrams can be saved as an image. Simple (flat) lattices can also be saved as an XML format file.

  Read more →
• 

  YrWall

  YrWall is a Digital Graffiti Wall developed by event company Luma, where designs are created on a large wall using a modified spray paint can. The can contains no paint, instead it has an IR light which is tracked by a computer vision system and the image immediately back-projected onto the wall. The inbuilt YrWall software has much of the functionality of a typical computer paint program, with a pop-out interface which enables users to change colour, spray width, opacity, work with stencils and use animated items such as swirls, stars, drips and splats. Recent additions to YrWall include options to email a JPEG of the completed design and create personalised stickers and T-shirts. == Dragons' Den == The inventor of YrWall, Tom Hogan, and his business partner, Tim Williams, appeared on Episode 4 of Series 8 of the BBC show Dragons' Den. Seeking investment in YrWall, the entrepreneurs were successful in gaining £50,000 for 40% of the YrWall parent company Lumacoustics from Dragons Deborah Meaden and Peter Jones. == World's Largest Interactive Graffiti Wall == In September 2009 YrWall was used to create the 'World's Largest Interactive Graffiti Wall' at the Bristol Festival, UK. Artists used the standard 3.5 m2 YrWall to produce artwork which was in turn projected live onto a 26m x 10m space on the side of the iconic Lloyds amphitheatre building.

  Read more →
• 

  Generalized blockmodeling of valued networks

  Generalized blockmodeling of valued networks is an approach of the generalized blockmodeling, dealing with valued networks (e.g., non-binary). While the generalized blockmodeling signifies a "formal and integrated approach for the study of the underlying functional anatomies of virtually any set of relational data", it is in principle used for binary networks. This is evident from the set of ideal blocks, which are used to interpret blockmodels, that are binary, based on the characteristic link patterns. Because of this, such templates are "not readily comparable with valued empirical blocks". To allow generalized blockmodeling of valued directional (one-mode) networks (e.g. allowing the direct comparisons of empirical valued blocks with ideal binary blocks), a non–parametric approach is used. With this, "an optional parameter determines the prominence of valued ties as a minimum percentile deviation between observed and expected flows". Such two–sided application of parameter then introduces "the possibility of non–determined ties, i.e. valued relations that are deemed neither prominent (1) nor non–prominent (0)." Resulted occurrences of links then motivate the modification of the calculation of inconsistencies between empirical and ideal blocks. At the same time, such links also give a possibility to measure the interpretational certainty, which is specific to each ideal block. Such maximum two–sided deviation threshold, holding the aggregate uncertainty score at zero or near–zero levels, is then proposed as "a measure of interpretational certainty for valued blockmodels, in effect transforming the optional parameter into an outgoing state". Problem with blockmodeling is the standard set of ideal block, as they are all specified using binary link (tie) patters; this results in "a non–trivial exercise to match and count inconsistencies between such ideal binary ties and empirical valued ties". One approach to solve this is by using dichotomization to transform the network into a binary version. The other two approaches were first proposed by Aleš Žiberna in 2007 by introducing valued (generalized) blockmodeling and also homogeneity blockmodeling. The basic idea of the latter is "that the inconsistency of an empirical block with its ideal block can be measured by within block variability of appropriate values". The newly–formed ideal blocks, which are appropriate for blockmodeling of valued networks, are then presented together with the definitions of their block inconsistencies. Two other approaches were later suggested by Carl Nordlund in 2019: deviational approach and correlation-based generalized approach. Both Nordlund's approaches are based on the idea, that valued networks can be compared with the ideal block without values. With this approach, more information is retained for analysis, which also means, that there are fewer partitions having identical values of the criterion function. This means, that the generalized blockmodeling of valued networks measures the inconsistencies more precisely. Usually, only one optimal partition is found in this approach, especially when it is used by homogeneity blockmodeling. Contrary, while using binary blockmodeling on the same sample, usually more than one optimal partition had occurred on several occasions.

  Read more →
• 

  Quantum neural network

  Quantum neural networks are computational neural network models which are based on the principles of quantum mechanics. The first ideas on quantum neural computation were published independently in 1995 by Subhash Kak and Ron Chrisley, engaging with the theory of quantum mind, which posits that quantum effects play a role in cognitive function. However, typical research in quantum neural networks involves combining classical artificial neural network models (which are widely used in machine learning for the important task of pattern recognition) with the advantages of quantum information in order to develop more efficient algorithms. One important motivation for these investigations is the difficulty to train classical neural networks, especially in big data applications. The hope is that features of quantum computing such as quantum parallelism or the effects of interference and entanglement can be used as resources. Since the technological implementation of a quantum computer is still in a premature stage, such quantum neural network models are mostly theoretical proposals that await their full implementation in physical experiments. Most Quantum neural networks are developed as feed-forward networks. Similar to their classical counterparts, this structure intakes input from one layer of qubits, and passes that input onto another layer of qubits. This layer of qubits evaluates this information and passes on the output to the next layer. Eventually the path leads to the final layer of qubits. The layers do not have to be of the same width, meaning they don't have to have the same number of qubits as the layer before or after it. This structure is trained on which path to take similar to classical artificial neural networks. This is discussed in a lower section. Quantum neural networks refer to three different categories: Quantum computer with classical data, classical computer with quantum data, and quantum computer with quantum data. == Examples == Quantum neural network research is still in its infancy, and a conglomeration of proposals and ideas of varying scope and mathematical rigor have been put forward. Most of them are based on the idea of replacing classical binary or McCulloch-Pitts neurons with a qubit (which can be called a "quron"), resulting in neural units that can be in a superposition of the state 'firing' and 'resting'. === Quantum perceptrons === A lot of proposals attempt to find a quantum equivalent for the perceptron unit from which neural nets are constructed. A problem is that nonlinear activation functions do not immediately correspond to the mathematical structure of quantum theory, since a quantum evolution is described by linear operations and leads to probabilistic observation. Ideas to imitate the perceptron activation function with a quantum mechanical formalism reach from special measurements to postulating non-linear quantum operators (a mathematical framework that is disputed). A direct implementation of the activation function using the circuit-based model of quantum computation has recently been proposed by Schuld, Sinayskiy and Petruccione based on the quantum phase estimation algorithm. === Quantum networks === At a larger scale, researchers have attempted to generalize neural networks to the quantum setting. One way of constructing a quantum neuron is to first generalise classical neurons and then generalising them further to make unitary gates. Interactions between neurons can be controlled quantumly, with unitary gates, or classically, via measurement of the network states. This high-level theoretical technique can be applied broadly, by taking different types of networks and different implementations of quantum neurons, such as photonically implemented neurons and quantum reservoir processor (quantum version of reservoir computing). Most learning algorithms follow the classical model of training an artificial neural network to learn the input-output function of a given training set and use classical feedback loops to update parameters of the quantum system until they converge to an optimal configuration. Learning as a parameter optimisation problem has also been approached by adiabatic models of quantum computing. Quantum neural networks can be applied to algorithmic design: given qubits with tunable mutual interactions, one can attempt to learn interactions following the classical backpropagation rule from a training set of desired input-output relations, taken to be the desired output algorithm's behavior. The quantum network thus 'learns' an algorithm. === Quantum associative memory === The first quantum associative memory algorithm was introduced by Dan Ventura and Tony Martinez in 1999. The authors do not attempt to translate the structure of artificial neural network models into quantum theory, but propose an algorithm for a circuit-based quantum computer that simulates associative memory. The memory states (in Hopfield neural networks saved in the weights of the neural connections) are written into a superposition, and a Grover-like quantum search algorithm retrieves the memory state closest to a given input. As such, this is not a fully content-addressable memory, since only incomplete patterns can be retrieved. The first truly content-addressable quantum memory, which can retrieve patterns also from corrupted inputs, was proposed by Carlo A. Trugenberger. Both memories can store an exponential (in terms of n qubits) number of patterns but can be used only once due to the no-cloning theorem and their destruction upon measurement. Trugenberger, however, has shown that his probabilistic model of quantum associative memory can be efficiently implemented and re-used multiples times for any polynomial number of stored patterns, a large advantage with respect to classical associative memories. === Classical neural networks inspired by quantum theory === A substantial amount of interest has been given to a "quantum-inspired" model that uses ideas from quantum theory to implement a neural network based on fuzzy logic. == Training == Quantum Neural Networks can be theoretically trained similarly to training classical/artificial neural networks. A key difference lies in communication between the layers of a neural networks. For classical neural networks, at the end of a given operation, the current perceptron copies its output to the next layer of perceptron(s) in the network. However, in a quantum neural network, where each perceptron is a qubit, this would violate the no-cloning theorem. A proposed generalized solution to this is to replace the classical fan-out method with an arbitrary unitary that spreads out, but does not copy, the output of one qubit to the next layer of qubits. Using this fan-out Unitary ( U f {\displaystyle U_{f}} ) with a dummy state qubit in a known state (Ex. | 0 ⟩ {\displaystyle |0\rangle } in the computational basis), also known as an Ancilla bit, the information from the qubit can be transferred to the next layer of qubits. This process adheres to the quantum operation requirement of reversibility. Using this quantum feed-forward network, deep neural networks can be executed and trained efficiently. A deep neural network is essentially a network with many hidden-layers, as seen in the sample model neural network above. Since the Quantum neural network being discussed uses fan-out Unitary operators, and each operator only acts on its respective input, only two layers are used at any given time. In other words, no Unitary operator is acting on the entire network at any given time, meaning the number of qubits required for a given step depends on the number of inputs in a given layer. Since Quantum Computers are notorious for their ability to run multiple iterations in a short period of time, the efficiency of a quantum neural network is solely dependent on the number of qubits in any given layer, and not on the depth of the network. === Cost functions === To determine the effectiveness of a neural network, a cost function is used, which essentially measures the proximity of the network's output to the expected or desired output. In a Classical Neural Network, the weights ( w {\displaystyle w} ) and biases ( b {\displaystyle b} ) at each step determine the outcome of the cost function C ( w , b ) {\displaystyle C(w,b)} . When training a Classical Neural network, the weights and biases are adjusted after each iteration, and given equation 1 below, where y ( x ) {\displaystyle y(x)} is the desired output and a out ( x ) {\displaystyle a^{\text{out}}(x)} is the actual output, the cost function is optimized when C ( w , b ) {\displaystyle C(w,b)} = 0. For a quantum neural network, the cost function is determined by measuring the fidelity of the outcome state ( ρ out {\displaystyle \rho ^{\text{out}}} ) with the desired outcome state ( ϕ out {\displaystyle \phi ^{\text{out}}} ), seen in Equation 2 below. In this case, the Unitary operators are adjusted after each it

  Read more →
• 

  Accumulated local effects

  Accumulated local effects (ALE) is a machine learning interpretability method. == Concepts == ALE uses a conditional feature distribution as an input and generates augmented data, creating more realistic data than a marginal distribution. It ignores far out-of-distribution (outlier) values. Unlike partial dependence plots and marginal plots, ALE is not defeated in the presence of correlated predictors. It analyzes differences in predictions instead of averaging them by calculating the average of the differences in model predictions over the augmented data, instead of the average of the predictions themselves. == Example == Given a model that predicts house prices based on its distance from city center and size of the building area, ALE compares the differences of predictions of houses of different sizes. The result separates the impact of the size from otherwise correlated features. == Limitations == Defining evaluation windows is subjective. High correlations between features can defeat the technique. ALE requires more and more uniformly distributed observations than PDP so that the conditional distribution can be reliably determined. The technique may produce inadequate results if the data is highly sparse, which is more common with high-dimensional data (curse of dimensionality).

  Read more →
• 

  Huawei Mobile Services

  Huawei Mobile Services (HMS) is a collection of proprietary services and high level application programming interfaces (APIs) developed by Huawei Technologies Co., Ltd. Its hub known as HMS Core serves as a toolkit for app development on Huawei devices. HMS is typically installed on Huawei devices on top of running HarmonyOS 4.x and earlier operating system on its earlier devices running the Android operating system with EMUI including devices already distributed with Google Mobile Services. Alongside, HMS Core Wear Engine for Android phones with lightweight based LiteOS wearable middleware app framework integration connectivity like notifications, status etc. HMS consists of seven key services and the HMS Core. The key services are Huawei ID, Huawei Cloud, AppGallery, Themes, Huawei Video, Browser, and Assistant. The web browser is based on Chromium. Huawei Quick Apps is the alternative to Google Instant Apps. By January 2020, over 50,000 apps had been integrated with HMS Core. Its rival, Google Mobile Services has 3 million apps on Google's Play Store. The AppGallery claimed 180 billion downloads in 2019. In March 2020, HMS was used by 650 million monthly active users across 170 countries. A Chinese phone manufacturer, LeTV, hosted a smartphone business communication meeting in Beijing on September 27, 2021, to demonstrate its phone, the LeTV S1. This was the first smartphone from a third-party manufacturer to include Huawei Mobile Services (HMS). == HMS on Android and HarmonyOS == Huawei Mobile Services on Android goes all the way back to August 2016 as Huawei ID services for phones, basic functionalities for Huawei P9 series. However, in May 2019 proved to be a significant change to HMS when Google was prohibited from working with Huawei on any new devices extending ecosystem for AppGallery store front launched in April 2018, year prior. This also included bundling Google's Apps, including Gmail, Maps and YouTube. Any new Huawei devices launched after 16 May 2019 were unable to receive updates from Google services and would be considered 'uncertified' meaning Huawei's only solution at the time was to turn HMS into a genuine competitor to Google and incentivize app developers to utilize the platform. Huawei officially launched Huawei Mobile Services in China on December 24, 2019, as a beta. Huawei expanded Huawei Mobile Services in Europe in February 2020 and other markets in Asia, Latin America, Middle East & Africa, Canada, Mexico followed outside banned US market. HMS is available on the Honor 9X Pro, View 30 Pro, Huawei Mate XS. HMS is also available, alongside GMS, on many other Huawei models launched before the ban. Huawei promised developers it would take, “less than 10 minutes", to port their app over to HMS - to illustrate the ease of portability between Google's Play Store and the HMS AppGallery. On January 15, 2020, HMS Core 4.0 (Huawei Mobile Services Core 4.0) was officially launched. Huawei announced that at this time, there were already 1.3 million developers and 55,000 applications on board. The next day, Huawei held a developer day event in London and invested £20 million to encourage developers in the United Kingdom and Ireland to use HMS. On July 15, 2021, Huawei expanded HMS with classic HarmonyOS dual-framework that provided Java support and eventually with JavaScript and ArkTS (eTS) language support with HMS Core 6.0 for app development with primarily Android apps, alongside limited HAP imperative developed based apps that shares AOSP file system libraries in all types of devices from smartphones, tablets, smart screens, smartwatches, and car machines. Including various third-party development frameworks, such as React Native, Cordova, etc. At HDC 2023, Huawei unveiled HarmonyOS 5, marking a total break from the hybrid Android derived platform. This shift replaced the legacy Android and classic HarmonyOS-based HMS SDK with a full native API developer kit SDK built solely on OpenHarmony. The architecture moved from middleware services to vertical integration path. In this new model, HMS Core libraries are no longer external add-ons but are bundled directly into the system and DevEco Studio as native HarmonyOS Kits. == HMS Core == HMS Core is a hub for Huawei Mobile Services and serves as a toolkit for app development on Huawei devices. The core comprises Development, Growth and Monetizing and was created as a replacement for Google Mobile Services (GMS) Core. HMS core services were available in more than 55,000 apps in June 2020; HMS Core 5.0 debuted in September 2020. HMS Core 6.0 was launched in June 2021 with extended support for Huawei Cloud services. In June 2021, the number of registered developers within the HMS ecosystem was 4 million, and the number of apps integrated with the HMS Core had reached 134,000. As of July 2022, registered developers within HMS ecosystem had grown to 5 million, and the number of apps integrated with the HMS Core reached 203,000. The number of apps had grown to 220,000 by 30 September 2022. == AppGallery == The AppGallery has a key rival, Google's Play Store on Android. The AppGallery is available in 170 countries, across 78 languages. == Reception == The reception of HMS is mixed, with the majority of discussion based around the key Google/Android apps which are not yet present on the AppGallery and whether or not this presents a significant problem to users. The open development of HMS Core has been regarded by some as benefiting the Android project as a whole, "If Huawei continues to invest in a holistically open approach ... the result could be that we could all end up a bit less beholden to Google".

  Read more →
• 

  Online machine learning

  In computer science, online machine learning is a method of machine learning in which data becomes available in a sequential order and is used to update the best predictor for future data at each step, as opposed to batch learning techniques which generate the best predictor by learning on the entire training data set at once. Online learning is a common technique used in areas of machine learning where it is computationally infeasible to train over the entire dataset, requiring the need of out-of-core algorithms. It is also used in situations where it is necessary for the algorithm to dynamically adapt to new patterns in the data, or when the data itself is generated as a function of time, e.g., prediction of prices in the financial international markets. Online learning algorithms may be prone to catastrophic interference, a problem that can be addressed by incremental learning approaches. Online machine learning algorithms find applications in a wide variety of fields such as sponsored search to maximize ad revenue, portfolio optimization, shortest path prediction (with stochastic weights, e.g. traffic on roads for a maps application), spam filtering, real-time fraud detection, dynamic pricing for e-commerce, etc. There is also growing interest in usage of online learning paradigms for LLMs to enable continuous, real-time adaptation after the initial training. == Introduction == In the setting of supervised learning, a function of f : X → Y {\displaystyle f:X\to Y} is to be learned, where X {\displaystyle X} is thought of as a space of inputs and Y {\displaystyle Y} as a space of outputs, that predicts well on instances that are drawn from a joint probability distribution p ( x , y ) {\displaystyle p(x,y)} on X × Y {\displaystyle X\times Y} . In reality, the learner never knows the true distribution p ( x , y ) {\displaystyle p(x,y)} over instances. Instead, the learner usually has access to a training set of examples ( x 1 , y 1 ) , … , ( x n , y n ) {\displaystyle (x_{1},y_{1}),\ldots ,(x_{n},y_{n})} . In this setting, the loss function is given as V : Y × Y → R {\displaystyle V:Y\times Y\to \mathbb {R} } , such that V ( f ( x ) , y ) {\displaystyle V(f(x),y)} measures the difference between the predicted value f ( x ) {\displaystyle f(x)} and the true value y {\displaystyle y} . The ideal goal is to select a function f ∈ H {\displaystyle f\in {\mathcal {H}}} , where H {\displaystyle {\mathcal {H}}} is a space of functions called a hypothesis space, so that some notion of total loss is minimized. Depending on the type of model (statistical or adversarial), one can devise different notions of loss, which lead to different learning algorithms. == Statistical view of online learning == In statistical learning models, the training sample ( x i , y i ) {\displaystyle (x_{i},y_{i})} are assumed to have been drawn from the true distribution p ( x , y ) {\displaystyle p(x,y)} and the objective is to minimize the expected "risk" I [ f ] = E [ V ( f ( x ) , y ) ] = ∫ V ( f ( x ) , y ) d p ( x , y ) . {\displaystyle I[f]=\mathbb {E} [V(f(x),y)]=\int V(f(x),y)\,dp(x,y)\ .} A common paradigm in this situation is to estimate a function f ^ {\displaystyle {\hat {f}}} through empirical risk minimization or regularized empirical risk minimization (usually Tikhonov regularization). The choice of loss function here gives rise to several well-known learning algorithms such as regularized least squares and support vector machines. A purely online model in this category would learn based on just the new input ( x t + 1 , y t + 1 ) {\displaystyle (x_{t+1},y_{t+1})} , the current best predictor f t {\displaystyle f_{t}} and some extra stored information (which is usually expected to have storage requirements independent of training data size). For many formulations, for example nonlinear kernel methods, true online learning is not possible, though a form of hybrid online learning with recursive algorithms can be used where f t + 1 {\displaystyle f_{t+1}} is permitted to depend on f t {\displaystyle f_{t}} and all previous data points ( x 1 , y 1 ) , … , ( x t , y t ) {\displaystyle (x_{1},y_{1}),\ldots ,(x_{t},y_{t})} . In this case, the space requirements are no longer guaranteed to be constant since it requires storing all previous data points, but the solution may take less time to compute with the addition of a new data point, as compared to batch learning techniques. A common strategy to overcome the above issues is to learn using mini-batches, which process a small batch of b ≥ 1 {\displaystyle b\geq 1} data points at a time, this can be considered as pseudo-online learning for b {\displaystyle b} much smaller than the total number of training points. Mini-batch techniques are used with repeated passing over the training data to obtain optimized out-of-core versions of machine learning algorithms, for example, stochastic gradient descent. When combined with backpropagation, this is currently the de facto training method for training artificial neural networks. === Example: linear least squares === The simple example of linear least squares is used to explain a variety of ideas in online learning. The ideas are general enough to be applied to other settings, for example, with other convex loss functions. === Batch learning === Consider the setting of supervised learning with f {\displaystyle f} being a linear function to be learned: f ( x j ) = ⟨ w , x j ⟩ = w ⋅ x j {\displaystyle f(x_{j})=\langle w,x_{j}\rangle =w\cdot x_{j}} where x j ∈ R d {\displaystyle x_{j}\in \mathbb {R} ^{d}} is a vector of inputs (data points) and w ∈ R d {\displaystyle w\in \mathbb {R} ^{d}} is a linear filter vector. The goal is to compute the filter vector w {\displaystyle w} . To this end, a square loss function V ( f ( x j ) , y j ) = ( f ( x j ) − y j ) 2 = ( ⟨ w , x j ⟩ − y j ) 2 {\displaystyle V(f(x_{j}),y_{j})=(f(x_{j})-y_{j})^{2}=(\langle w,x_{j}\rangle -y_{j})^{2}} is used to compute the vector w {\displaystyle w} that minimizes the empirical loss I n [ w ] = ∑ j = 1 n V ( ⟨ w , x j ⟩ , y j ) = ∑ j = 1 n ( x j T w − y j ) 2 {\displaystyle I_{n}[w]=\sum _{j=1}^{n}V(\langle w,x_{j}\rangle ,y_{j})=\sum _{j=1}^{n}(x_{j}^{\mathsf {T}}w-y_{j})^{2}} where y j ∈ R . {\displaystyle y_{j}\in \mathbb {R} .} Let X {\displaystyle X} be the i × d {\displaystyle i\times d} data matrix and y ∈ R i {\displaystyle y\in \mathbb {R} ^{i}} is the column vector of target values after the arrival of the first i {\displaystyle i} data points. Assuming that the covariance matrix Σ i = X T X {\displaystyle \Sigma _{i}=X^{\mathsf {T}}X} is invertible (otherwise it is preferential to proceed in a similar fashion with Tikhonov regularization), the best solution f ∗ ( x ) = ⟨ w ∗ , x ⟩ {\displaystyle f^{}(x)=\langle w^{},x\rangle } to the linear least squares problem is given by w ∗ = ( X T X ) − 1 X T y = Σ i − 1 ∑ j = 1 i x j y j . {\displaystyle w^{}=(X^{\mathsf {T}}X)^{-1}X^{\mathsf {T}}y=\Sigma _{i}^{-1}\sum _{j=1}^{i}x_{j}y_{j}.} Now, calculating the covariance matrix Σ i = ∑ j = 1 i x j x j T {\displaystyle \Sigma _{i}=\sum _{j=1}^{i}x_{j}x_{j}^{\mathsf {T}}} takes time O ( i d 2 ) {\displaystyle O(id^{2})} , inverting the d × d {\displaystyle d\times d} matrix takes time O ( d 3 ) {\displaystyle O(d^{3})} , while the rest of the multiplication takes time O ( d 2 ) {\displaystyle O(d^{2})} , giving a total time of O ( i d 2 + d 3 ) {\displaystyle O(id^{2}+d^{3})} . When there are n {\displaystyle n} total points in the dataset, to recompute the solution after the arrival of every datapoint i = 1 , … , n {\displaystyle i=1,\ldots ,n} , the naive approach will have a total complexity O ( n 2 d 2 + n d 3 ) {\displaystyle O(n^{2}d^{2}+nd^{3})} . Note that when storing the matrix Σ i {\displaystyle \Sigma _{i}} , then updating it at each step needs only adding x i + 1 x i + 1 T {\displaystyle x_{i+1}x_{i+1}^{\mathsf {T}}} , which takes O ( d 2 ) {\displaystyle O(d^{2})} time, reducing the total time to O ( n d 2 + n d 3 ) = O ( n d 3 ) {\displaystyle O(nd^{2}+nd^{3})=O(nd^{3})} , but with an additional storage space of O ( d 2 ) {\displaystyle O(d^{2})} to store Σ i {\displaystyle \Sigma _{i}} . === Online learning: recursive least squares === The recursive least squares (RLS) algorithm considers an online approach to the least squares problem. It can be shown that by initialising w 0 = 0 ∈ R d {\displaystyle \textstyle w_{0}=0\in \mathbb {R} ^{d}} and Γ 0 = I ∈ R d × d {\displaystyle \textstyle \Gamma _{0}=I\in \mathbb {R} ^{d\times d}} , the solution of the linear least squares problem given in the previous section can be computed by the following iteration: Γ i = Γ i − 1 − Γ i − 1 x i x i T Γ i − 1 1 + x i T Γ i − 1 x i {\displaystyle \Gamma _{i}=\Gamma _{i-1}-{\frac {\Gamma _{i-1}x_{i}x_{i}^{\mathsf {T}}\Gamma _{i-1}}{1+x_{i}^{\mathsf {T}}\Gamma _{i-1}x_{i}}}} w i = w i − 1 − Γ i x i ( x i T w i − 1 − y i ) {\displaystyle w_{i}=w_{i-1}-\Gamma _{i}x_{i}\left(x_{i}^{\mathsf {T}}w_{

  Read more →
• 

  Genetic representation

  In computer programming, genetic representation is a way of presenting solutions/individuals in evolutionary computation methods. The term encompasses both the concrete data structures and data types used to realize the genetic material of the candidate solutions in the form of a genome, and the relationships between search space and problem space. In the simplest case, the search space corresponds to the problem space (direct representation). The choice of problem representation is tied to the choice of genetic operators, both of which have a decisive effect on the efficiency of the optimization. Genetic representation can encode appearance, behavior, physical qualities of individuals. Difference in genetic representations is one of the major criteria drawing a line between known classes of evolutionary computation. Terminology is often analogous with natural genetics. The block of computer memory that represents one candidate solution is called an individual. The data in that block is called a chromosome. Each chromosome consists of genes. The possible values of a particular gene are called alleles. A programmer may represent all the individuals of a population using binary encoding, permutational encoding, encoding by tree, or any one of several other representations. == Representations in some popular evolutionary algorithms == Genetic algorithms (GAs) are typically linear representations; these are often, but not always, binary. Holland's original description of GA used arrays of bits. Arrays of other types and structures can be used in essentially the same way. The main property that makes these genetic representations convenient is that their parts are easily aligned due to their fixed size. This facilitates simple crossover operation. Depending on the application, variable-length representations have also been successfully used and tested in evolutionary algorithms (EA) in general and genetic algorithms in particular, although the implementation of crossover is more complex in this case. Evolution strategy uses linear real-valued representations, e.g., an array of real values. It uses mostly gaussian mutation and blending/averaging crossover. Genetic programming (GP) pioneered tree-like representations and developed genetic operators suitable for such representations. Tree-like representations are used in GP to represent and evolve functional programs with desired properties. Human-based genetic algorithm (HBGA) offers a way to avoid solving hard representation problems by outsourcing all genetic operators to outside agents, in this case, humans. The algorithm has no need for knowledge of a particular fixed genetic representation as long as there are enough external agents capable of handling those representations, allowing for free-form and evolving genetic representations. === Common genetic representations === binary array integer or real-valued array binary tree natural language parse tree directed graph == Distinction between search space and problem space == Analogous to biology, EAs distinguish between problem space (corresponds to phenotype) and search space (corresponds to genotype). The problem space contains concrete solutions to the problem being addressed, while the search space contains the encoded solutions. The mapping from search space to problem space is called genotype-phenotype mapping. The genetic operators are applied to elements of the search space, and for evaluation, elements of the search space are mapped to elements of the problem space via genotype-phenotype mapping. == Relationships between search space and problem space == The importance of an appropriate choice of search space for the success of an EA application was recognized early on. The following requirements can be placed on a suitable search space and thus on a suitable genotype-phenotype mapping: === Completeness === All possible admissible solutions must be contained in the search space. === Redundancy === When more possible genotypes exist than phenotypes, the genetic representation of the EA is called redundant. In nature, this is termed a degenerate genetic code. In the case of a redundant representation, neutral mutations are possible. These are mutations that change the genotype but do not affect the phenotype. Thus, depending on the use of the genetic operators, there may be phenotypically unchanged offspring, which can lead to unnecessary fitness determinations, among other things. Since the evaluation in real-world applications usually accounts for the lion's share of the computation time, it can slow down the optimization process. In addition, this can cause the population to have higher genotypic diversity than phenotypic diversity, which can also hinder evolutionary progress. In biology, the Neutral Theory of Molecular Evolution states that this effect plays a dominant role in natural evolution. This has motivated researchers in the EA community to examine whether neutral mutations can improve EA functioning by giving populations that have converged to a local optimum a way to escape that local optimum through genetic drift. This is discussed controversially and there are no conclusive results on neutrality in EAs. On the other hand, there are other proven measures to handle premature convergence. === Locality === The locality of a genetic representation corresponds to the degree to which distances in the search space are preserved in the problem space after genotype-phenotype mapping. That is, a representation has a high locality exactly when neighbors in the search space are also neighbors in the problem space. In order for successful schemata not to be destroyed by genotype-phenotype mapping after a minor mutation, the locality of a representation must be high. === Scaling === In genotype-phenotype mapping, the elements of the genotype can be scaled (weighted) differently. The simplest case is uniform scaling: all elements of the genotype are equally weighted in the phenotype. A common scaling is exponential. If integers are binary coded, the individual digits of the resulting binary number have exponentially different weights in representing the phenotype. Example: The number 90 is written in binary (i.e., in base two) as 1011010. If now one of the front digits is changed in the binary notation, this has a significantly greater effect on the coded number than any changes at the rear digits (the selection pressure has an exponentially greater effect on the front digits). For this reason, exponential scaling has the effect of randomly fixing the "posterior" locations in the genotype before the population gets close enough to the optimum to adjust for these subtleties. == Hybridization and repair in genotype-phenotype mapping == When mapping the genotype to the phenotype being evaluated, domain-specific knowledge can be used to improve the phenotype and/or ensure that constraints are met. This is a commonly used method to improve EA performance in terms of runtime and solution quality. It is illustrated below by two of the three examples. == Examples == === Example of a direct representation === An obvious and commonly used encoding for the traveling salesman problem and related tasks is to number the cities to be visited consecutively and store them as integers in the chromosome. The genetic operators must be suitably adapted so that they only change the order of the cities (genes) and do not cause deletions or duplications. Thus, the gene order corresponds to the city order and there is a simple one-to-one mapping. === Example of a complex genotype-phenotype mapping === In a scheduling task with heterogeneous and partially alternative resources to be assigned to a set of subtasks, the genome must contain all necessary information for the individual scheduling operations or it must be possible to derive them from it. In addition to the order of the subtasks to be executed, this includes information about the resource selection. A phenotype then consists of a list of subtasks with their start times and assigned resources. In order to be able to create this, as many allocation matrices must be created as resources can be allocated to one subtask at most. In the simplest case this is one resource, e.g., one machine, which can perform the subtask. An allocation matrix is a two-dimensional matrix, with one dimension being the available time units and the other being the resources to be allocated. Empty matrix cells indicate availability, while an entry indicates the number of the assigned subtask. The creation of allocation matrices ensures firstly that there are no inadmissible multiple allocations. Secondly, the start times of the subtasks can be read from it as well as the assigned resources. A common constraint when scheduling resources to subtasks is that a resource can only be allocated once per time unit and that the reservation must be for a contiguous period of time. To achieve this in a timely manner, which is a c

  Read more →