AI Writing Helper

AI Writing Helper — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Visual temporal attention

    Visual temporal attention

    Visual temporal attention is a special case of visual attention that involves directing attention to specific instant of time. Similar to its spatial counterpart visual spatial attention, these attention modules have been widely implemented in video analytics in computer vision to provide enhanced performance and human interpretable explanation of deep learning models. As visual spatial attention mechanism allows human and/or computer vision systems to focus more on semantically more substantial regions in space, visual temporal attention modules enable machine learning algorithms to emphasize more on critical video frames in video analytics tasks, such as human action recognition. In convolutional neural network-based systems, the prioritization introduced by the attention mechanism is regularly implemented as a linear weighting layer with parameters determined by labeled training data. == Application in Action Recognition == Recent video segmentation algorithms often exploits both spatial and temporal attention mechanisms. Research in human action recognition has accelerated significantly since the introduction of powerful tools such as Convolutional Neural Networks (CNNs). However, effective methods for incorporation of temporal information into CNNs are still being actively explored. Motivated by the popular recurrent attention models in natural language processing, the Attention-aware Temporal Weighted CNN (ATW CNN) is proposed in videos, which embeds a visual attention model into a temporal weighted multi-stream CNN. This attention model is implemented as temporal weighting and it effectively boosts the recognition performance of video representations. Besides, each stream in the proposed ATW CNN framework is capable of end-to-end training, with both network parameters and temporal weights optimized by stochastic gradient descent (SGD) with back-propagation. Experimental results show that the ATW CNN attention mechanism contributes substantially to the performance gains with the more discriminative snippets by focusing on more relevant video segments. == Literature == Seibold VC, Balke J and Rolke B (2023): Temporal attention. Front. Cognit. 2:1168320. doi: 10.3389/fcogn.2023.1168320.

    Read more →
  • Plaintext

    Plaintext

    In cryptography, plaintext usually means unencrypted information pending input into cryptographic algorithms, usually encryption algorithms. This usually refers to data that is transmitted or stored unencrypted. == Overview == With the advent of computing, the term plaintext expanded beyond human-readable documents to mean any data, including binary files, in a form that can be viewed or used without requiring a key or other decryption device. Information—a message, document, file, etc.—if to be communicated or stored in an unencrypted form is referred to as plaintext. Plaintext is used as input to an encryption algorithm; the output is usually termed ciphertext, particularly when the algorithm is a cipher. Codetext is less often used, and almost always only when the algorithm involved is actually a code. Some systems use multiple layers of encryption, with the output of one encryption algorithm becoming "plaintext" input for the next. == Secure handling == Insecure handling of plaintext can introduce weaknesses into a cryptosystem by letting an attacker bypass the cryptography altogether. Plaintext is vulnerable in use and in storage, whether in electronic or paper format. Physical security means the securing of information and its storage media from physical, attack—for instance by someone entering a building to access papers, storage media, or computers. Discarded material, if not disposed of securely, may be a security risk. Even shredded documents and erased magnetic media might be reconstructed with sufficient effort. If plaintext is stored in a computer file, the storage media, the computer and its components, and all backups must be secure. Sensitive data is sometimes processed on computers whose mass storage is removable, in which case physical security of the removed disk is vital. In the case of securing a computer, useful (as opposed to handwaving) security must be physical (e.g., against burglary, brazen removal under cover of supposed repair, installation of covert monitoring devices, etc.), as well as virtual (e.g., operating system modification, illicit network access, Trojan programs). Wide availability of keydrives, which can plug into most modern computers and store large quantities of data, poses another severe security headache. A spy (perhaps posing as a cleaning person) could easily conceal one, and even swallow it if necessary. Discarded computers, disk drives and media are also a potential source of plaintexts. Most operating systems do not actually erase anything— they simply mark the disk space occupied by a deleted file as 'available for use', and remove its entry from the file system directory. The information in a file deleted in this way remains fully present until overwritten at some later time when the operating system reuses the disk space. With even low-end computers commonly sold with many gigabytes of disk space and rising monthly, this 'later time' may be months later, or never. Even overwriting the portion of a disk surface occupied by a deleted file is insufficient in many cases. Peter Gutmann of the University of Auckland wrote a celebrated 1996 paper on the recovery of overwritten information from magnetic disks; areal storage densities have gotten much higher since then, so this sort of recovery is likely to be more difficult than it was when Gutmann wrote. Modern hard drives automatically remap failing sectors, moving data to good sectors. This process makes information on those failing, excluded sectors invisible to the file system and normal applications. Special software, however, can still extract information from them. Some government agencies (e.g., US NSA) require that personnel physically pulverize discarded disk drives and, in some cases, treat them with chemical corrosives. This practice is not widespread outside government, however. Garfinkel and Shelat (2003) analyzed 158 second-hand hard drives they acquired at garage sales and the like, and found that less than 10% had been sufficiently sanitized. The others contained a wide variety of readable personal and confidential information. See data remanence. Physical loss is a serious problem. The US State Department, Department of Defense, and the British Secret Service have all had laptops with secret information, including in plaintext, lost or stolen. Appropriate disk encryption techniques can safeguard data on misappropriated computers or media. On occasion, even when data on host systems is encrypted, media that personnel use to transfer data between systems is plaintext because of poorly designed data policy. For example, in October 2007, HM Revenue and Customs lost CDs that contained the unencrypted records of 25 million child benefit recipients in the United Kingdom. Modern cryptographic systems resist known plaintext or even chosen plaintext attacks, and so may not be entirely compromised when plaintext is lost or stolen. Older systems resisted the effects of plaintext data loss on security with less effective techniques—such as padding and Russian copulation to obscure information in plaintext that could be easily guessed.

    Read more →
  • Branch number

    Branch number

    In cryptography, the branch number is a numerical value that characterizes the amount of diffusion introduced by a vectorial Boolean function F that maps an input vector a to output vector F ( a ) {\displaystyle F(a)} . For the (usual) case of a linear F the value of the differential branch number is produced by: applying nonzero values of a (i.e., values that have at least one non-zero component of the vector) to the input of F; calculating for each input value a the Hamming weight W {\displaystyle W} (number of nonzero components), and adding weights W ( a ) {\displaystyle W(a)} and W ( F ( a ) ) {\displaystyle W(F(a))} together; selecting the smallest combined weight across for all nonzero input values: B d ( F ) = min a ≠ 0 ( W ( a ) + W ( F ( a ) ) ) {\displaystyle B_{d}(F)={\underset {a\neq 0}{\min }}(W(a)+W(F(a)))} . If both a and F ( a ) {\displaystyle F(a)} have s components, the result is obviously limited on the high side by the value s + 1 {\displaystyle s+1} (this "perfect" result is achieved when any single nonzero component in a makes all components of F ( a ) {\displaystyle F(a)} to be non-zero). A high branch number suggests higher resistance to the differential cryptanalysis: the small variations of input will produce large changes on the output and in order to obtain small variations of the output, large changes of the input value will be required. The term was introduced by Daemen and Rijmen in early 2000s and quickly became a typical tool to assess the diffusion properties of the transformations. == Mathematics == The branch number concept is not limited to the linear transformations, Daemen and Rijmen provided two general metrics: differential branch number, where the minimum is obtained over inputs of F that are constructed by independently sweeping all the values of two nonzero and unequal vectors a, b ( ⊕ {\displaystyle \oplus } is a component-by-component exclusive-or): B d ( F ) = min a ≠ b ( W ( a ⊕ b ) + W ( F ( a ) ⊕ F ( b ) ) {\displaystyle B_{d}(F)={\underset {a\neq b}{\min }}(W(a\oplus b)+W(F(a)\oplus F(b))} ; for linear branch number, the independent candidates α {\displaystyle \alpha } and β {\displaystyle \beta } are independently swept; they should be nonzero and correlated with respect to F (the L A T ( α , β ) {\displaystyle LAT(\alpha ,\beta )} coefficient of the linear approximation table of F should be nonzero): B l ( F ) = min α ≠ 0 , β , L A T ( α , β ) ≠ 0 ( W ( α ) + W ( β ) ) {\displaystyle B_{l}(F)={\underset {\alpha \neq 0,\beta ,LAT(\alpha ,\beta )\neq 0}{\min }}(W(\alpha )+W(\beta ))} .

    Read more →
  • Majal (organization)

    Majal (organization)

    Majal is a regional not-for-profit organization focused on "amplifying voices of dissent" throughout the Middle East and North Africa via digital media. Founded in Bahrain, the organization "creates platforms and web applications that promote freedom of expression and social justice." Majal, which relies on open source platforms, like WordPress and Ruby on Rails, was launched in 2006 by Esra'a Al Shafei as a simple group-blogging idea. However, it has changed course to focus on the development of unique applications and tools. == Objectives and means == Majal's content, in addition to its projects and applications, is free open source content to ensure right to access information for everyone. The organization uses a broad spectrum of social media tools, ranging from written blogs, podcasts, vlogs, comics, video animation and pictures to live broadcasting through radio. == Projects and applications == Majal runs various active projects that include Alliance for Kurdish Rights, The Muslim Network for Baháʼí Rights, a discussion tool for Arab LGBT youth and various Mobile apps. == Funding == Majal is funded through private donations and grants from non-governmental organizations, as well as any potential revenues earned through freelance development. Its primary funders are the Shuttleworth Foundation and the Omidyar Network. In 2008, Majal won the Berkman Award from the Berkman Klein Center for Internet & Society at Harvard University in the Human Rights/Global Advocacy category. This $10,000 award was Majal’s first source of funding. This award is presented to “people or institutions that have made a significant contribution to the Internet and its impact on society over the past decade.” In 2009, the March 18 Movement, a project of Majal, received the Think Social Award, which demonstrates how social media can be used to solve the world’s problems. Esra'a Al-Shafei was named a 2009 Echoing Green Fellow for Civil and Human Rights, a seed funding award for young entrepreneurs engaged in social change. Financially, the fellowship consists of a $60,000 stipend paid over two years. Most recently, MEY has received a grant from the Arab Fund for Arts and Culture for its Mideast Tunes website. == Awards == Winner of Human Rights Tulip 2014 Human Rights Tulip - Human rights - Government.nl Ashoka Changemakers Citizen Media competition in 2011 for their CrowdVoice project. Monaco Media Prize 2011 for Majal founder and director Esra'a Al Shafei in 2011. The BOBS Special Topic Human Rights award in 2011 for the Majal website Migrant Rights. ThinkSocial Award in 2009, as powerful model for how social media can be used to address global problems. Echoing Green, 2009 Fellowship. TEDGlobal 2009 Fellowship. Berkman Award for Internet Innovation from Berkman Klein Center for Internet & Society at Harvard Law School in 2008 for the outstanding contributions to the internet and its impact on society. The Global Journal selected Majal as one of the Top 100 NGOs in 2013. 2013-2014 Shuttleworth Foundation Fellowship. == Leadership == Majal team is led primarily by women. The organization was founded by Esra'a Al Shafei, a blogger from Bahrain in 2006. Ahmed Zidan of Egypt has served for over three years as the Editor-in-Chief of Majal Arabic, and is the co-founder of Ahwaa, and is also a podcaster. Other team members include Mona Kareem, Rima Kalush, Abir Ghattas, Namita Malhotra, and Vani Saraswathi. == 2011 Middle East and North Africa protests == Blogs and video played a role in the documentation of protests throughout the Middle East and North Africa during 2010-2011, also known as the Arab Spring. During this period, MEY's project, CrowdVoice (launched in 2010) helped curate and archive the large amounts of videos, images, and eye-witness reports being aggregated and crowdsourced from across the region. As a result, it had been censored temporarily in Yemen and is still censored in Bahrain. == Media coverage == Majal claims to have received various coverage from news agencies, TV satellite channels, radio stations, newspapers, magazines. For instance, Sky News, CNN, New York Times, BBC, The Guardian, NPR, Time, MTV political blog "Act", VH1, Daily Telegraph, Die Zeit, Frankfurter Rundschau FR-online, Toronto Star, TechCrunch, Rolling Stone Middle East, Abu Dhabi TV, Gulf News, Al-Hasnaa' magazine, ReadWriteWeb, Mashable, The Next Web, Radio Sawt Beirut International, Radio Farda among many others.

    Read more →
  • Embodied agent

    Embodied agent

    In artificial intelligence, an embodied agent, also sometimes referred to as an interface agent, is an intelligent agent that interacts with the environment through a physical body within that environment. Agents that are represented graphically with a body, for example a human or a cartoon animal, are also called embodied agents, although they have only virtual, not physical, embodiment. A branch of artificial intelligence focuses on empowering such agents to interact autonomously with human beings and the environment. Mobile robots are one example of physically embodied agents; Ananova and Microsoft Agent are examples of graphically embodied agents. Embodied conversational agents are embodied agents (usually with a graphical front-end as opposed to a robotic body) that are capable of engaging in conversation with one another and with humans employing the same verbal and nonverbal means that humans do (such as gesture, facial expression, and so forth). == Embodied conversational agents == Embodied conversational agents are a form of intelligent user interface. Graphically embodied agents aim to unite gesture, facial expression and speech to enable face-to-face communication with users, providing a powerful means of human-computer interaction. == Advantages == Face-to-face communication allows communication protocols that give a much richer communication channel than other means of communicating. It enables pragmatic communication acts such as conversational turn-taking, facial expression of emotions, information structure and emphasis, visualization and iconic gestures, and orientation in a three-dimensional environment. This communication takes place through both verbal and non-verbal channels such as gaze, gesture, spoken intonation and body posture. Research has found that users prefer a non-verbal visual indication of an embodied system's internal state to a verbal indication, demonstrating the value of additional non-verbal communication channels. As well as this, the face-to-face communication involved in interacting with an embodied agent can be conducted alongside another task without distracting the human participants, instead improving the enjoyment of such an interaction. Furthermore, the use of an embodied presentation agent results in improved recall of the presented information. Embodied agents also provide a social dimension to the interaction. Humans willingly ascribe social awareness to computers, and thus interaction with embodied agents follows social conventions, similar to human to human interactions. This social interaction both raises the believably and perceived trustworthiness of agents, and increases the user's engagement with the system. Rickenberg and Reeves found that the presence of an embodied agent on a website increased the level of user trust in that website, but also increased users' anxiety and affected their performance, as if they were being watched by a real human. Another effect of the social aspect of agents is that presentations given by an embodied agent are perceived as being more entertaining and less difficult than similar presentations given without an agent. Research shows that perceived enjoyment, followed by perceived usefulness and ease of use, is the major factor influencing user adoption of embodied agents. A study in January 2004 by Byron Reeves at Stanford demonstrated how digital characters could "enhance online experiences" through explaining how virtual characters essentially add a sense of familiarity to the user experience and make it more approachable. This increase in likability in turn helps make the products better, which benefits both the end users and those creating the product. === Applications === The rich style of communication that characterizes human conversation makes conversational interaction with embodied conversational agents ideal for many non-traditional interaction tasks. A familiar application of graphically embodied agents is computer games; embodied agents are ideal for this setting because the richer communication style makes interacting with the agent enjoyable. Embodied conversational agents have also been used in virtual training environments, portable personal navigation guides, interactive fiction and storytelling systems, interactive online characters and automated presenters and commentators. Major virtual assistants like Siri, Amazon Alexa and Google Assistant do not come with any visual embodied representation, which is believed to limit the sense of human presence by users. The U.S. Department of Defense utilizes a software agent called SGT STAR on U.S. Army-run Web sites and Web applications for site navigation, recruitment and propaganda purposes. Sgt. Star is run by the Army Marketing and Research Group, a division operated directly from The Pentagon. Sgt. Star is based upon the ActiveSentry technology developed by Next IT, a Washington-based information technology services company. Other such bots in the Sgt. Star "family" are utilized by the Federal Bureau of Investigation and the Central Intelligence Agency for intelligence gathering purposes.

    Read more →
  • Content repository

    Content repository

    A content repository or content store is a database of digital content with an associated set of data management, search and access methods allowing application-independent access to the content, rather like a digital library, but with the ability to store and modify content in addition to searching and retrieving. The content repository acts as the storage engine for a larger application such as a content management system or a document management system, which adds a user interface on top of the repository's application programming interface. == Advantages provided by repositories == Common rules for data access allow many applications to work with the same content without interrupting the data. They give out signals when changes happen, letting other applications using the repository know that something has been modified, which enables collaborative data management. Developers can deal with data using programs that are more compatible with the desktop programming environment. The data model is scriptable when users use a content repository. == Content repository features == A content repository may provide functionality such as: Add/edit/delete content Hierarchy and sort order management Query / search Versioning Access control Import / export Locking Life-cycle management Retention and holding / records management == Examples == Apache Jackrabbit ModeShape == Applications == Content management Document management Digital asset management Records management Revision control Social collaboration Web content management == Standards and specification == Content repository API for Java WebDAV Content Management Interoperability Services

    Read more →
  • Knapsack cryptosystems

    Knapsack cryptosystems

    Knapsack cryptosystems are cryptosystems whose security is based on the hardness of solving the knapsack problem. They remain quite unpopular because simple versions of these algorithms have been broken for several decades. However, that type of cryptosystem is a good candidate for post-quantum cryptography. The most famous knapsack cryptosystem is the Merkle-Hellman Public Key Cryptosystem, one of the first public key cryptosystems, published the same year as the RSA cryptosystem. However, this system has been broken by several attacks: one from Shamir, one by Adleman, and the low density attack. However, there exist modern knapsack cryptosystems that are considered secure so far: among them is Nasako-Murakami 2006. Knapsack cryptosystems, when not subject to classical cryptoanalysis, are believed to be difficult even for quantum computers. That is not the case for systems that rely on factoring large integers, like RSA, or computing discrete logarithms, like ECDSA, problems solved in polynomial time with Shor's algorithm.

    Read more →
  • Brain Imaging Data Structure

    Brain Imaging Data Structure

    The Brain Imaging Data Structure (BIDS) is a standard for organizing, annotating, and describing data collected during neuroimaging experiments. It is based on a formalized file and directory structure and metadata files (based on JSON and TSV) with controlled vocabulary. This standard has been adopted by a multitude of labs around the world as well as databases such as OpenNeuro, SchizConnect, Developing Human Connectome Project, and FCP-INDI, and is seeing uptake in an increasing number of studies. While originally specified for MRI data, BIDS has been extended to several other imaging modalities such as MEG, EEG, and intracranial EEG (see also BIDS Extension Proposals). == History == The project is a community-driven effort. BIDS, originally OBIDS (Open Brain Imaging Data Structure), was initiated during an INCF sponsored data sharing working group meeting (January 2015) at Stanford University. It was subsequently spearheaded and maintained by Chris Gorgolewski. Since October 2019, the project is headed by a Steering Group and maintained by a separate team of maintainers, the Maintainers Group, according to a governance document that was approved of by the BIDS community in a vote. BIDS has advanced under the direction and effort of contributors, the community of researchers that appreciate the value of standardizing neuroimaging data to facilitate sharing and analysis. == BIDS Extension Proposals == BIDS can be extended in a backwards compatible way and is evolving over time. This is accomplished through BIDS Extension Proposals (BEPs), which are community-driven processes following agreed-upon guidelines. A full list of finalized BEPs and BEPs in progress can be found on the BIDS website

    Read more →
  • Scene text

    Scene text

    Scene text is text that appears in an image captured by a camera in an outdoor environment. The detection and recognition of scene text from camera captured images are computer vision tasks which became important after smart phones with good cameras became ubiquitous. The text in scene images varies in shape, font, colour and position. The recognition of scene text is further complicated sometimes by non-uniform illumination and focus. To improve scene text recognition, the International Conference on Document Analysis and Recognition (ICDAR) conducts a robust reading competition once in two years. The competition was held in 2003, 2005 and during every ICDAR conference. International association for pattern recognition (IAPR) has created a list of datasets as Reading systems. == Text detection == Text detection is the process of detecting the text present in the image, followed by surrounding it with a rectangular bounding box. Text detection can be carried out using image based techniques or frequency based techniques. In image based techniques, an image is segmented into multiple segments. Each segment is a connected component of pixels with similar characteristics. The statistical features of connected components are utilised to group them and form the text. Machine learning approaches such as support vector machine and convolutional neural networks are used to classify the components into text and non-text. In frequency based techniques, discrete Fourier transform (DFT) or discrete wavelet transform (DWT) are used to extract the high frequency coefficients. It is assumed that the text present in an image has high frequency components and selecting only the high frequency coefficients filters the text from the non-text regions in an image. == Word recognition == In word recognition, the text is assumed to be already detected and located and the rectangular bounding box containing the text is available. The word present in the bounding box needs to be recognized. The methods available to perform word recognition can be broadly classified into top-down and bottom-up approaches. In the top-down approaches, a set of words from a dictionary is used to identify which word suits the given image. Images are not segmented in most of these methods. Hence, the top-down approach is sometimes referred as segmentation free recognition. In the bottom-up approaches, the image is segmented into multiple components and the segmented image is passed through a recognition engine. Either an off the shelf Optical character recognition (OCR) engine or a custom-trained one is used to recognise the text.

    Read more →
  • Key (cryptography)

    Key (cryptography)

    A key in cryptography is a piece of information, usually a string of numbers or letters that are stored in a file, which, when processed through a cryptographic algorithm, can encode or decode cryptographic data. Based on the used method, the key can be different sizes and varieties, but in all cases, the strength of the encryption relies on the security of the key being maintained. A key's security strength is dependent on its algorithm, the size of the key, the generation of the key, and the process of key exchange. == Scope == The key is what is used to encrypt data from plaintext to ciphertext. There are different methods for utilizing keys and encryption. === Symmetric cryptography === Symmetric cryptography refers to the practice of the same key being used for both encryption and decryption. === Asymmetric cryptography === Asymmetric cryptography has separate keys for encrypting and decrypting. These keys are known as the public and private keys, respectively. == Purpose == Since the key protects the confidentiality and integrity of the system, it is important to be kept secret from unauthorized parties. With public key cryptography, only the private key must be kept secret, but with symmetric cryptography, it is important to maintain the confidentiality of the key. Kerckhoff's principle states that the entire security of the cryptographic system relies on the secrecy of the key. == Key sizes == Key size is the number of bits in the key defined by the algorithm. This size defines the upper bound of the cryptographic algorithm's security. The larger the key size, the longer it will take before the key is compromised by a brute force attack. Since perfect secrecy is not feasible for key algorithms, researches are now more focused on computational security. In the past, keys were required to be a minimum of 40 bits in length, however, as technology advanced, these keys were being broken quicker and quicker. As a response, restrictions on symmetric keys were enhanced to be greater in size. Currently, 2048 bit RSA is commonly used, which is sufficient for current systems. However, current RSA key sizes would all be cracked quickly with a powerful quantum computer. "The keys used in public key cryptography have some mathematical structure. For example, public keys used in the RSA system are the product of two prime numbers. Thus public key systems require longer key lengths than symmetric systems for an equivalent level of security. 3072 bits is the suggested key length for systems based on factoring and integer discrete logarithms which aim to have security equivalent to a 128 bit symmetric cipher." == Key generation == To prevent a key from being guessed, keys need to be generated randomly and contain sufficient entropy. The problem of how to safely generate random keys is difficult and has been addressed in many ways by various cryptographic systems. A key can directly be generated by using the output of a Random Bit Generator (RBG), a system that generates a sequence of unpredictable and unbiased bits. A RBG can be used to directly produce either a symmetric key or the random output for an asymmetric key pair generation. Alternatively, a key can also be indirectly created during a key-agreement transaction, from another key or from a password. Some operating systems include tools for "collecting" entropy from the timing of unpredictable operations such as disk drive head movements. For the production of small amounts of keying material, ordinary dice provide a good source of high-quality randomness. == Establishment scheme == The security of a key is dependent on how a key is exchanged between parties. Establishing a secured communication channel is necessary so that outsiders cannot obtain the key. A key establishment scheme (or key exchange) is used to transfer an encryption key among entities. Key agreement and key transport are the two types of a key exchange scheme that are used to be remotely exchanged between entities . In a key agreement scheme, a secret key, which is used between the sender and the receiver to encrypt and decrypt information, is set up to be sent indirectly. All parties exchange information (the shared secret) that permits each party to derive the secret key material. In a key transport scheme, encrypted keying material that is chosen by the sender is transported to the receiver. Either symmetric key or asymmetric key techniques can be used in both schemes. The Diffie–Hellman key exchange and Rivest-Shamir-Adleman (RSA) are the most two widely used key exchange algorithms. In 1976, Whitfield Diffie and Martin Hellman constructed the Diffie–Hellman algorithm, which was the first public key algorithm. The Diffie–Hellman key exchange protocol allows key exchange over an insecure channel by electronically generating a shared key between two parties. On the other hand, RSA is a form of the asymmetric key system which consists of three steps: key generation, encryption, and decryption. Key confirmation delivers an assurance between the key confirmation recipient and provider that the shared keying materials are correct and established. The National Institute of Standards and Technology recommends key confirmation to be integrated into a key establishment scheme to validate its implementations. == Management == Key management concerns the generation, establishment, storage, usage and replacement of cryptographic keys. A key management system (KMS) typically includes three steps of establishing, storing and using keys. The base of security for the generation, storage, distribution, use and destruction of keys depends on successful key management protocols. == Key vs password == A password is a memorized series of characters including letters, digits, and other special symbols that are used to verify identity. It is often produced by a human user or a password management software to protect personal and sensitive information or generate cryptographic keys. Passwords are often created to be memorized by users and may contain non-random information such as dictionary words. On the other hand, a key can help strengthen password protection by implementing a cryptographic algorithm which is difficult to guess or replace the password altogether. A key is generated based on random or pseudo-random data and can often be unreadable to humans. A password is less safe than a cryptographic key due to its low entropy, randomness, and human-readable properties. However, the password may be the only secret data that is accessible to the cryptographic algorithm for information security in some applications such as securing information in storage devices. Thus, a deterministic algorithm called a key derivation function (KDF) uses a password to generate the secure cryptographic keying material to compensate for the password's weakness. Various methods such as adding a salt or key stretching may be used in the generation.

    Read more →
  • Voice inversion

    Voice inversion

    Voice inversion scrambling is an analog method of obscuring the content of a transmission. It is sometimes used in public service radio, automobile racing, cordless telephones and the Family Radio Service. Without a descrambler, the transmission makes the speaker "sound like Donald Duck". Despite the term, the technique operates on the passband of the information and so can be applied to any information being transmitted. == Forms and details == There are various forms of voice inversion which offer differing levels of security. Overall, voice inversion scrambling offers little true security as software and even hobbyist kits are available from kit makers for scrambling and descrambling. The cadence of the speech is not changed. It is often easy to guess what is happening in the conversation by listening for other audio cues like questions, short responses and other language cadences. In the simplest form of voice inversion, the frequency p {\displaystyle p} of each component is replaced with s − p {\displaystyle s-p} , where s {\displaystyle s} is the frequency of a carrier wave. This can be done by amplitude modulating the speech signal with the carrier, then applying a low-pass filter to select the lower sideband. This will make the low tones of the voice sound like high ones and vice versa. This process also occurs naturally if a radio receiver is tuned to a single sideband transmission but set to decode the wrong sideband. There are more advanced forms of voice inversion which are more complex and require more effort to descramble. One method is to use a random code to choose the carrier frequency and then change this code in real time. This is called Rolling Code voice inversion and one can often hear the "ticks" in the transmission which signal the changing of the inversion point. Another method is split band voice inversion. This is where the band is split and then each band is inverted separately. A rolling code can also be added to this method for variable split band inversion (VSB). Common carrier frequencies are: 2.632 kHz, 2.718 kHz, 2.868 kHz, 3.023 kHz, 3.107 kHz, 3.196 kHz, 3.333 kHz, 3.339 kHz, 3.496 kHz, 3.729 kHz and 4.096 kHz. Voice inversion offers no security at all and software is available to restore the original voice, which is why it is no longer used to protect conversations today. However, voice inversion is still found in low-end Chinese walkie talkies.

    Read more →
  • Computer network

    Computer network

    In computer science, computer engineering, and telecommunications, a network is a group of communicating computers and peripherals known as hosts, which communicate data to other hosts via communication protocols, as facilitated by networking hardware. Within a computer network, hosts are identified by network addresses, which allow networking hardware to locate and identify hosts. Hosts may also have hostnames, memorable labels for the host nodes, which can be mapped to a network address using a hosts file or a name server such as Domain Name Service. The physical medium that supports information exchange includes wired media like copper cables, optical fibers, and wireless radio-frequency media. The arrangement of hosts and hardware within a network architecture is known as the network topology. The first computer network was created in 1940 when George Stibitz connected a terminal at Dartmouth to his Complex Number Calculator at Bell Labs in New York. Today, almost all computers are connected to a computer network, such as the global Internet or embedded networks such as those found in many modern electronic devices. Many applications have only limited functionality unless they are connected to a network. Networks support applications and services, such as access to the World Wide Web, digital video and audio, application and storage servers, printers, and email and instant messaging applications. == History == === Early origins (1940 – 1960s) === In 1940, George Stibitz of Bell Labs connected a teletype at Dartmouth to a Bell Labs computer running his Complex Number Calculator to demonstrate the use of computers at long distance. This was the first real-time, remote use of a computing machine. In the late 1950s, a network of computers was built for the U.S. military Semi-Automatic Ground Environment (SAGE) radar system using the Bell 101 modem. It was the first commercial modem for computers, released by AT&T Corporation in 1958. The modem allowed digital data to be transmitted over regular unconditioned telephone lines at a speed of 110 bits per second (bit/s). In 1959, Christopher Strachey filed a patent application for time-sharing in the United Kingdom and John McCarthy initiated the first project to implement time-sharing of user programs at MIT. Strachey passed the concept on to J. C. R. Licklider at the inaugural UNESCO Information Processing Conference in Paris that year. McCarthy was instrumental in the creation of three of the earliest time-sharing systems (the Compatible Time-Sharing System in 1961, the BBN Time-Sharing System in 1962, and the Dartmouth Time-Sharing System in 1963). In 1959, Anatoly Kitov proposed to the Central Committee of the Communist Party of the Soviet Union a detailed plan for the re-organization of the control of the Soviet armed forces and of the Soviet economy on the basis of a network of computing centers. Kitov's proposal was rejected, as later was the 1962 OGAS economy management network project. During the 1960s, Paul Baran and Donald Davies independently invented the concept of packet switching for data communication between computers over a network. Baran's work addressed adaptive routing of message blocks across a distributed network, but did not include routers with software switches, nor the idea that users, rather than the network itself, would provide the reliability. Davies' hierarchical network design included high-speed routers, communication protocols and the essence of the end-to-end principle. The NPL network, a local area network at the National Physical Laboratory (United Kingdom), pioneered the implementation of the concept in 1968-69 using 768 kbit/s links. Both Baran's and Davies' inventions were seminal contributions that influenced the development of computer networks. === ARPANET (1969 – 1974) === In 1962 and 1963, J. C. R. Licklider sent a series of memos to office colleagues discussing the concept of the "Intergalactic Computer Network", a computer network intended to allow general communications among computer users. This ultimately became the basis for the ARPANET, which began in 1969. That year, the first four nodes of the ARPANET were connected using 50 kbit/s circuits between the University of California at Los Angeles, the Stanford Research Institute, the University of California, Santa Barbara, and the University of Utah. Designed principally by Bob Kahn, the network's routing, flow control, software design and network control were developed by the IMP team working for Bolt Beranek & Newman. In the early 1970s, Leonard Kleinrock carried out mathematical work to model the performance of packet-switched networks, which underpinned the development of the ARPANET. His theoretical work on hierarchical routing in the late 1970s with student Farouk Kamoun remains critical to the operation of the Internet today. In 1973, Peter Kirstein put internetworking into practice at University College London (UCL), connecting the ARPANET to British academic networks, the first international heterogeneous computer network. That same year, Robert Metcalfe wrote a formal memo at Xerox PARC describing Ethernet, a local area networking system he created with David Boggs. It was inspired by the packet radio ALOHAnet, started by Norman Abramson and Franklin Kuo at the University of Hawaii in the late 1960s. Metcalfe and Boggs, with John Shoch and Edward Taft, also developed the PARC Universal Packet for internetworking. That year, the French CYCLADES network, directed by Louis Pouzin was the first to make the hosts responsible for the reliable delivery of data, rather than this being a centralized service of the network itself. === The internet (1974 – present) === In 1974, Vint Cerf and Bob Kahn published their seminal 1974 paper on internetworking, A Protocol for Packet Network Intercommunication. Later that year, Cerf, Yogen Dalal, and Carl Sunshine wrote the first Transmission Control Protocol (TCP) specification, RFC 675, coining the term Internet as a shorthand for internetworking. In July 1976, Metcalfe and Boggs published their paper "Ethernet: Distributed Packet Switching for Local Computer Networks" and in December 1977, together with Butler Lampson and Charles P. Thacker, they received U.S. patent 4063220A for their invention. In 1976, John Murphy of Datapoint Corporation created ARCNET, a token-passing network first used to share storage devices. In 1979, Robert Metcalfe pursued making Ethernet an open standard. In 1980, Ethernet was upgraded from the original 2.94 Mbit/s protocol to the 10 Mbit/s protocol, which was developed by Ron Crane, Bob Garner, Roy Ogus, Hal Murray, Dave Redell and Yogen Dalal. In 1986, the National Science Foundation (NSF) launched the National Science Foundation Network (NSFNET) as a general-purpose research network connecting various NSF-funded sites to each other and to regional research and education networks. In 1995, the transmission speed capacity for Ethernet increased from 10 Mbit/s to 100 Mbit/s. By 1998, Ethernet supported transmission speeds of 1 Gbit/s. Subsequently, higher speeds of up to 800 Gbit/s were added (as of 2025). The scaling of Ethernet has been a contributing factor to its continued use. In the 1980s and 1990s, as embedded systems were becoming increasingly important in factories, cars, and airplanes, network protocols were developed to allow the embedded computers to communicate. In the late 1990s and 2000s, ubiquitous computing and an Internet of Things became popular. === Commercial usage === In 1960, the commercial airline reservation system semi-automatic business research environment (SABRE) went online with two connected mainframes. In 1965, Western Electric introduced the first widely used telephone switch that implemented computer control in the switching fabric. In 1972, commercial services were first deployed on experimental public data networks in Europe. Public data networks in Europe, North America and Japan began using X.25 in the late 1970s and interconnected with X.75. This underlying infrastructure was used for expanding TCP/IP networks in the 1980s. In 1977, the first long-distance fiber network was deployed by GTE in Long Beach, California. == Hardware == === Network links === The transmission media used to link devices to form a computer network include electrical cable, optical fiber, and free space. In the OSI model, the software to handle the media is defined at layers 1 and 2 — the physical layer and the data link layer. Common examples of networking technologies include: Ethernet is a widely adopted family of networking technologies that use copper and fiber media in local area networks (LAN). The media and protocol standards that enable communication between networked devices over Ethernet are defined by IEEE 802.3. Wireless LAN standards, which use radio waves. Some standards use infrared signals as a transmission medium. Power line communication uses a building's power cabling to transmit

    Read more →
  • Adobe After Effects

    Adobe After Effects

    Adobe After Effects is a digital effects, motion graphics, and compositing application developed by Adobe Inc.; it is used for animation and in the post-production process of film making, video games and television production. Among other things, After Effects can be used for keying, tracking, compositing, and animation. It also functions as a very basic non-linear editor, audio editor, and media transcoder. In 2019, the program won an Academy Award for scientific and technical achievement. == History == After Effects was originally created by David Herbstman, David Simons, Daniel Wilk, David M. Cotter, and Russell Belfer at the Company of Science and Art in Providence, Rhode Island. The first two versions of the software, 1.0 (January 1993) and 1.1, were released there by the company. CoSA with After Effects was acquired by Aldus Corporation in July 1993, which in turn was acquired by Adobe in 1994. Adobe acquired PageMaker as well. Adobe's first new release of After Effects was version 3.0. == Third-party integrations == After Effects functionality can be extended through a variety of third-party integrations. The most common integrations are: plug-ins, scripts, and extensions. === Plug-ins === Plug-ins are predominantly written in C or C++ and extend the functionality of After Effects, allowing for more advanced features such as particle systems, physics engines, 3D effects, and the ability to bridge the gap between After Effects and another. === Scripts === After Effects Scripts are a series of commands written in both JavaScript and the ExtendScript language. After Effects Scripts, unlike plug-ins, can only access the core functionality of After Effects. Scripts are often developed to automate repetitive tasks, to simplify complex After Effects features, or to perform complex calculations that would otherwise take a long time to complete. Scripts can also use some functionality not directly exposed through the graphical user interface. === Extensions === After Effects Extensions offer the ability to extend After Effects functionality through modern web development technologies like HTML5, and Node.js, without the need for C++. After Effects Extensions make use of Adobe's Common Extensibility Platform or CEP Panels, which means they can be built to interact with other Adobe CC apps.

    Read more →
  • Server-Gated Cryptography

    Server-Gated Cryptography

    Server-Gated Cryptography (SGC), also known as International Step-Up by Netscape, is a defunct mechanism that was used to step up from 40-bit or 56-bit to 128-bit cipher suites with SSL. It was created in response to United States federal legislation on the export of strong cryptography in the 1990s. The legislation had limited encryption to weak algorithms and shorter key lengths in software exported outside of the United States of America. When the legislation added an exception for financial transactions, SGC was created as an extension to SSL with the certificates being restricted to financial organisations. In 1999, this list was expanded to include online merchants, healthcare organizations, and insurance companies. This legislation changed in January 2000, resulting in vendors no longer shipping export-grade browsers and SGC certificates becoming available without restriction. Internet Explorer supported SGC starting with patched versions of Internet Explorer 3. SGC became obsolete when Internet Explorer 5.01 SP1 and Internet Explorer 5.5 started supporting strong encryption without the need for a separate high encryption pack (except on Windows 2000, which needs its own high encryption pack that was included in Service Pack 2 and later). "Export-grade" browsers are unusable on the modern Web due to many servers disabling export cipher suites. Additionally, these browsers are incapable of using SHA-2 family signature hash algorithms like SHA-256. Certification authorities are trying to phase out the new issuance of certificates with the older SHA-1 signature hash algorithm. The continuing use of SGC facilitates the use of obsolete, insecure Web browsers with HTTPS. However, while certificates that use the SHA-1 signature hash algorithm remain available, some certificate authorities continue to issue SGC certificates (often charging a premium for them) although they are obsolete. The reason certificate authorities can charge a premium for SGC certificates is that browsers only allowed a limited number of roots to support SGC. When an SSL handshake takes place, the software (e.g. a web browser) would list the ciphers that it supports. Although the weaker exported browsers would only include weaker ciphers in its initial SSL handshake, the browser also contained stronger cryptography algorithms. There are two protocols involved to activate them. Netscape Communicator 4 used International Step-Up, which used the now obsolete insecure renegotiation to change to a stronger cipher suite. Microsoft used SGC, which sends a new Client Hello message listing the stronger cipher suites on the same connection after the certificate is determined to be SGC capable, and also supported Netscape Step-Up for compatibility (though this support in the NT 4.0 SP6 and IE 5.01 version had a bug where changing MAC algorithms during Step-Up did not work properly).

    Read more →
  • Social media use by businesses

    Social media use by businesses

    Social media use by businesses includes a range of applications. Although social media accessed via desktop computers offer an online shopping variety of opportunities for companies in a wide range of business sectors, mobile social media, which users can access when they are "on the go" via tablet computers or smartphones, benefit companies because of the location- and time-sensitive awareness of their users. Mobile social media tools can be used for marketing research, communication, sales promotions/discounts, informal employee learning/organizational development, relationship development/loyalty programs, and e-commerce. Marketing research: Mobile social media applications provide companies data about offline consumer movements at a level of detail that was previously accessible to online companies only. These applications allow any business to know the exact time a customer who uses social media entered one of its locations, as well as know the social media comments made during the visit. Communication: Mobile social media communication takes two forms: company-to-consumer (in which a company may establish a connection to a consumer based on its location and provide reviews about locations nearby) and user-generated content. For example, McDonald's offered $5 and $10 gift-cards to 100 users randomly selected among those checking in at one of its restaurants. This promotion increased check-ins by 33% (from 2,146 to 2,865), resulted in over 50 articles and blog posts, and prompted several hundred thousand news feeds and Twitter messages. Sales promotions and discounts: Although customers have had to use printed coupons in the past, mobile social media allows companies to tailor promotions to specific users at specific times. For example, when launching its California-Cancun service, Virgin America offered users who checked in through Loopt at one of three designated taco trucks in San Francisco or Los Angeles between 11 a.m. and 3 p.m. on 31 August 2010, two tacos for $1 and two flights to Cancun or Cabo for the price of one. This special promotion was only available to people who were at a certain location at a certain time. Relationship development and loyalty programs: In order to increase long-term relationships with customers, companies can develop loyalty programs that allow customers who check-in via social media regularly at a location to earn discounts or perks. For example, American Eagle Outfitters remunerates such customers with a tiered 10%, 15%, or 20% discount on their total purchase. Informal employee learning/organizational development is facilitated by social media. Technologies such as blogs, wiki pages, web forums, social networks and other social media act as technology enhanced learning (TEL) tools, and their users perceive change in organizational structure, culture and knowledge management. The prerequisite for the successful use of social media are motivated employees who want to use the new technologies. It is central for companies to understand the factors that determine the willingness to use social media. Customer service and support: A company can gain cost savings and increase revenue and customer satisfaction by using social media platforms in customer service and support. By using social media tools, company's have easy and widescale contact to its customers and simultaneously increase their brand knowledge. E-commerce: Social media sites are increasingly implementing marketing-friendly strategies, creating platforms that are mutually beneficial for users, businesses, and the networks themselves in the popularity and accessibility of e-commerce, or online purchases. The user who posts their comments about a company's product or service benefits because they are able to share their views with their online friends and acquaintances. The company benefits because it obtains insight (positive or negative) about how their product or service is viewed by consumers. Mobile social media applications such as Amazon.com and Pinterest have started to influence an upward trend in the popularity and accessibility of e-commerce. E-commerce businesses may refer to social media as consumer-generated media (CGM). A common thread running through all definitions of social media is a blending of technology and social interaction for the co-creation of value for the business or organization that is using it. People obtain valuable information, education, news, and other data from electronic and print media. Social media are distinct from industrial and traditional media such as newspapers, magazines, television, and film as they are comparatively inexpensive marketing tools and are highly accessible. They enable anyone, including private individuals, to publish or access information easily. Industrial media generally require significant resources to publish information, and in most cases the articles go through many revisions before being published. This process adds to the cost and the resulting market price. Originally social media was only used by individuals, but now it is used by both businesses and nonprofit organizations and also in government and politics. One characteristic shared by both social and industrial media is the capability to reach small or large audiences; for example, either a blog post or a television show may reach no people or millions of people. Some of the properties that help describe the differences between social and industrial media are: Quality: In industrial (traditional) publishing—mediated by a publisher—the typical range of quality is substantially narrower (skewing to the high quality side) than in niche, unmediated markets like user-generated social media posts. The main challenge posed by the content in social media sites is the fact that the distribution of quality has high variance: from very high-quality items to low-quality, sometimes even abusive or inappropriate content. Reach: Both industrial and social media technologies provide scale and are capable of reaching a global audience. Industrial media, however, typically use a centralized framework for organization, production, and dissemination, whereas social media are by their very nature more decentralized, less hierarchical, and distinguished by multiple points of production and utility. Frequency: The number of times users access a type of media per day. Heavy social media users, such as young people, check their social media account numerous times throughout the day. Accessibility: The means of production for industrial media are typically government or corporate (privately owned); social media tools are generally available to the public at little or no cost, or they are supported by advertising revenue. While social media tools are available to anyone with access to Internet and a computer or mobile device, due to the digital divide, the poorest segment of the population lacks access to the Internet and computer. Low-income people may have more access to traditional media (TV, radio, etc.), as an inexpensive TV and aerial or radio costs much less than an inexpensive computer or mobile device. Moreover, in many regions, TV or radio owners can tune into free over the air programming; computer or mobile device owners need Internet access to go to social media sites. Usability: Industrial media production typically requires specialized skills and training. For example, in the 1970s, to record a pop song, an aspiring singer would have to rent time in an expensive professional recording studio and hire an audio engineer. Conversely, most social media activities, such as posting a video of oneself singing a song require only modest reinterpretation of existing skills (assuming a person understands Web 2.0 technologies); in theory, anyone with access to the Internet can operate the means of social media production, and post digital pictures, videos or text online. Immediacy: The time lag between communications produced by industrial media can be long (days, weeks, or even months, by the time the content has been reviewed by various editors and fact checkers) compared to social media (which can be capable of virtually instantaneous responses). The immediacy of social media can be seen as a strength, in that it enables regular people to instantly communicate their opinions and information. At the same time, the immediacy of social media can also be seen as a weakness, as the lack of fact checking and editorial "gatekeepers" facilitates the circulation of hoaxes and fake news. Permanence: Industrial media, once created, cannot be altered (e.g., once a magazine article or paper book is printed and distributed, changes cannot be made to that same article in that print run) whereas social media posts can be altered almost instantaneously, when the user decides to edit their post or due to comments from other readers. Community media constitute a hybrid of industrial and social media. Though community-owned, some community radio,

    Read more →