Explore the best AI Writing Tools — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.
The PANGU (Planet and Asteroid Natural scene Generation Utility) is a computer graphics utility of which the development was funded by ESA and performed by University of Dundee. It generates scenes of planets, moons, asteroids, spacecraft and rovers. The main purpose of the tool is to test and validate navigation techniques based on the processing of images coming from on-board sensors, such as a camera or imaging LIDAR on a planetary lander.
Read more →
C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G, 5G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network". == Background == Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells. There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times. == Evolution of base station architecture == === All-in-one macro base station === In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments. === Distributed base station === For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture. === C-RAN/Cloud-RAN === C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments. == Architecture overview == C-RAN architecture has the following characteristics that are distinct from other cellular architectures: Large scale centralized deployment: Allows many RRHs to connect to a centralized BBU pool. The maximum distance can be 20km in fiber link for 4G (LTE/LTE-A) systems, and even longer distances (40~80km) for 3G (WCDMA/TD-SCDMA) and 2G (GSM/CDMA) systems. Native support to Collaborative Radio technologies: Any BBU can talk with any other BBU within the BBU pool with very high bandwidth (10 Gbit/s and above) and low latency (10 μs level). This is enabled by the interconnection of BBUs in the pool. This is one major difference from BBU Hotelling, or base station Hotelling; in the latter case, the BBUs of different base stations are simply stacked together and have no direct link between them to allow physical layer co-ordination. Real-time virtualization capability based on open platform: This is different from traditional base stations built on proprietary hardware, where the software and hardware are close-sourced and provided by single vendors. In contrast, a C-RAN BBU pool is built on open hardware, like x86/ARM CPU based servers, and interface cards that handle fiber links to RRHs and inter-connections in the pool. Real-time virtualization ensures that resources in the pool can be allocated dynamically to base station software stacks, say 4G/3G/2G function modules from different vendors, according to network load. However, to satisfy the strict timing requirements of wireless communication systems, the real-time performance for C-RAN is at the level of tens of microseconds, which is two orders of magnitude better than the millisecond level 'real-time' performance usually seen in Cloud Computing environments. == Similar architecture and systems == KT, a telecom operator in the Republic of Korea, introduced a Cloud Computing Center (CCC) system in their 3G (WCDMA/HSPA) and 4G (LTE/LTE-A) network in 2011 and 2012. The concept of CCC is basically the same as C-RAN. SK Telecom has also deployed Smart Cloud Access Network (SCAN) and Advanced-SCAN in their 4G (LTE/LTE-A) network in Korea no later than 2012. In 2014, Airvana (now CommScope) introduced OneCell, a C-RAN-based small cell system designed for enterprises and public spaces. == Competing architectures in cellular network evolution == === All-in-one BTS === One major alternative solution that is addressing similar challenges of RAN, is the small size, all-in-one outdoor BTS. Thanks to the achievements in the semiconductor industry, all the functionality of a BTS, including RF, baseband processing, MAC processing and package level processing, can now be implemented in a volume of <50 liters. This makes the system small and weatherproof, reduces the difficulty of BTS site choice and construction, eliminates the air conditioning requirement, and thus reduces operational costs. However, because each BTS is still working on its own, it cannot readily make use of the collaboration algorithms to reduce the interference between neighboring BTSs. It is also relatively hard to upgrade or repair because the all-in-one BTS units are usually mounted near the antenna. More processing units in less-protected environments also implies a higher failure rate compared to C-RAN, which only has the RRU deployed outdoors. The advantage of Cloud RAN lies in its ability to implement LTE-Advanced features such as Coordinated MultiPoint (CoMP) with very low latency between multiple radio heads. However, the economic benefit of improvements such as CoMP can be negated by the higher backhaul costs for some operators. === Small cell === The main competition between small cell and C-RAN occurs in two deployment scenarios: outdoor hotspot coverage and indoor coverage. == Academic research and publications == As one of the promising evolution paths for future cellular network architecture, C-RAN has attracted high academic research interest. Meanwhile, because the native support of cooperative radio capability built into the C-RAN architecture, it also enables many advanced algorithms that were hard to implement in cellular networks, including Cooperative Multi-Point Transmission/Receiving, Network Coding, etc. In October 2011, Wireless World Research Forum 27 was hosted in Germany, when China Mobile was invited to give a C-RAN presentation. In August 2012, IEEE C-RAN 2012 workshop was hosted in Kunming, China. CRC Press published a book, "Green Communications: Theore
Read more →
GazoPa was an image search engine that used features from an image to search for and identify similar images which closed in 2011. GazoPa began in TechCrunch50 in 2008 before launching into a state of open beta in 2009. GazoPa branched out and released a flower photo community site called "GazoPa Bloom" in 2010. This site was for exploring flower images and, if users need help identifying a flower, uploading images for other people try to identify them. Both sites closed to the public in 2011 when the company decided to focus on other areas of their business.
Read more →
Scroll was a subscription-based web service developed by Scroll Labs Inc., offering ad-free access to websites in exchange for a fee. Scroll was not an ad blocker; instead, it partnered directly with internet publishers who voluntarily removed ads from their sites for Scroll users in exchange for a portion of the subscription fee. In May 2021, Scroll was acquired by Twitter. In October 2021, Scroll sent out an email announcing its integration into Twitter Blue within 30 days. == Functionality == Scroll enabled users to browse websites that partnered with Scroll without encountering online advertising, in exchange for a subscription fee. Unlike ad blocker, which disable advertisements without compensating the publisher, Scroll sent a browser cookie indicating that the user was a subscriber. The Scroll software integrated into the website detected this cookie and served an ad-free version of the site. In exchange for disabling advertisements, partner websites received a portion of the subscription fee. As of January 2020, Scroll retained 30% of the subscription fee, with the remaining 70% distributed among publisher sites. Payments to sites were made individually by users based on their 'engagement and loyalty,' rather than from a single pool of all subscription revenue. Scroll did not grant subscribers access to partner sites behind a paywall; it only removed ads from the site if the user also paid the publication's subscription fee. == History == Scroll was founded in 2016 by former Chartbeat Chief Executive Tony Haile. Scroll raised US$3 million in its first round of funding in 2016, including investments from The New York Times, Uncork Capital, and Axel Springer SE. By October 2018, Scroll had raised US$10 million in funding. In 2018, Scroll signed its first partner websites, which included The Atlantic, Fusion Media Group, Business Insider, Slate, MSNBC, The Philadelphia Inquirer, and Talking Points Memo. In February 2019, Scroll acquired the social media curation app Nuzzel. The same month, Mozilla and Scroll announced a partnership to run a "test pilot" together, but did not go into details. Scroll entered beta testing in 2019 and launched to the general public on January 28, 2020. In March 2020, Mozilla started offering Scroll as part of its "Firefox Better Web" service bundle. In May 2021, Scroll was acquired by Twitter, with the future of Scroll cited as being uncertain. An email to customers announcing the change said, "Later this year, Scroll will become part of a wider Twitter subscription that will expand on and adapt our services and functionality".
Read more →
Collateral freedom is an anti-censorship strategy that attempts to make it economically prohibitive for censors to block content on the Internet. This is achieved by hosting content on cloud services that are considered by censors to be "too important to block", and then using encryption to prevent censors from identifying requests for censored information that is hosted among other content, forcing censors to either allow access to the censored information or take down entire services.
Read more →
Electronic business (also known as online business or e-business) is any kind of business or commercial activity that includes sharing information across the internet. Commerce constitutes the exchange of products and services between businesses, groups, and individuals; and can be seen as one of the essential activities of any business. E-commerce focuses on the use of ICT to enable the external activities and relationships of the business with individuals, groups, and other organizations, while e-business does not only deal with online commercial operations of enterprises, but also deals with their other organizational matters such as human resource management and production. The term "e-business" was coined by IBM's marketing and Internet team in 1996. == Market participants == Electronic business can take place between a very large number of market participants; it can be between business and consumer, private individuals, public administrations, or any other organizations such as non-governmental organizations (NGOs). These various market participants can be divided into three main groups: Business (B) Consumer (C) Administration (A) All of them can be either buyers or service providers within the market. There are nine possible combinations for electronic business relationships. B2C and B2B belong to E-commerce, while A2B and A2A belong to the E-government sector which is also a part of the electronic business. == History == One of the founding pillars of electronic business was the development of the Electronic Data Interchange (EDI) electronic data interchange. This system replaced traditional mailing and faxing of documents with a digital transfer of data from one computer to another, without any human intervention. Michael Aldrich is considered the developer of the predecessor to online shopping. In 1979, the entrepreneur connected a television set to a transaction processing computer with a telephone line and called it "teleshopping", meaning shopping at distance. From the mid-nineties, major advancements were made in the commercial use of the Internet. Amazon, which launched in 1995, started as an online bookstore and grew to become nowadays the largest online retailer worldwide, selling food, toys, electronics, apparel and more. Other successful stories of online marketplaces include eBay or Etsy. In 1994, IBM, with its agency Ogilvy & Mather, began to use its foundation in IT solutions and expertise to market itself as a leader of conducting business on the Internet through the term "e-business." Then CEO Louis V. Gerstner, Jr. was prepared to invest $1 billion to market this new brand. After conducting worldwide market research in October 1997, IBM began with an eight-page piece in The Wall Street Journal that would introduce the concept of "e-business" and advertise IBM's expertise in the new field. IBM decided not to trademark the term "e-business" in the hopes that other companies would use the term and create an entirely new industry. However, this proved to be too successful and by 2000, to differentiate itself, IBM launched a $300 million campaign about its "e-business infrastructure" capabilities. Since that time, the terms, "e-business" and "e-commerce" have been loosely interchangeable and have become a part of the common vernacular. According to the U.S. Department Of Commerce, the estimated retail e-commerce sales in Q1 2020 were representing almost 12% of total U.S. retail sales, against 4% for Q1 2010. == Business model == The transformation toward e-business is complex and in order for it to succeed, there is a need to balance between strategy, an adapted business model (e-intermediary, marketplaces), right processes (sales, marketing) and technology (Supply Chain Management, Customer Relationship Management). When organizations go online, they have to decide which e-business models best suit their goals. A business model is defined as the organization of product, service and information flows, and the source of revenues and benefits for suppliers and customers. The concept of the e-business model is the same but used in online presence. === Revenue model === A key component of the business model is the revenue model or profit model, which is a framework for generating revenues. It identifies which revenue source to pursue, what value to offer, how to price the value, and who pays for the value. It is a key component of a company's business model. It primarily identifies what product or service will be created in order to generate revenues and the ways in which the product or service will be sold. Without a well-defined revenue model, that is, a clear plan of how to generate revenues, new businesses will more likely struggle due to costs that they will not be able to sustain. By having a revenue model, a business can focus on a target audience, fund development plans for a product or service, establish marketing plans, begin a line of credit and raise capital. ==== E-commerce ==== E-commerce (short for "electronic commerce") is trading in products or services using computer networks, such as the Internet. Electronic commerce draws on technologies such as mobile commerce, electronic funds transfer, supply chain management, Internet marketing, online transaction processing, electronic data interchange (EDI), inventory management systems, and automated data collection. Modern electronic commerce typically uses the World Wide Web for at least one part of the transaction's life cycle, although it may also use other technologies such as e-mail. == Concerns == While much has been written of the economic advantages of Internet-enabled commerce, there is also evidence that some aspects of the internet such as maps and location-aware services may serve to reinforce economic inequality and the digital divide. Electronic commerce may be responsible for consolidation and the decline of mom-and-pop, brick and mortar businesses resulting in increases in income inequality. === Security === E-business systems naturally have greater security risks than traditional business systems, therefore it is important for e-business systems to be fully protected against these risks. A far greater number of people have access to e-businesses through the internet than would have access to a traditional business. Customers, suppliers, employees, and numerous other people use any particular e-business system daily and expect their confidential information to stay secure. Hackers are one of the great threats to the security of e-businesses. Some common security concerns for e-Businesses include keeping business and customer information private and confidential, the authenticity of data, and data integrity. Some of the methods of protecting e-business security and keeping information secure include physical security measures as well as data storage, data transmission, anti-virus software, firewalls, and encryption to list a few. ==== Privacy and confidentiality ==== Confidentiality is the extent to which businesses makes personal information available to other businesses and individuals. With any business, confidential information must remain secure and only be accessible to the intended recipient. However, this becomes even more difficult when dealing with e-businesses specifically. To keep such information secure means protecting any electronic records and files from unauthorized access, as well as ensuring safe transmission and data storage of such information. Tools such as encryption and firewalls manage this specific concern within e-business. ==== Authenticity ==== E-business transactions pose greater challenges for establishing authenticity due to the ease with which electronic information may be altered and copied. Both parties in an e-business transaction want to have the assurance that the other party is who they claim to be, especially when a customer places an order and then submits a payment electronically. One common way to ensure this is to limit access to a network or trusted parties by using a virtual private network (VPN) technology. The establishment of authenticity is even greater when a combination of techniques are used, and such techniques involve checking "something you know" (i.e. password or PIN), "something you need" (i.e. credit card), or "something you are" (i.e. digital signatures or voice recognition methods). Many times in e-business, however, "something you are" is pretty strongly verified by checking the purchaser's "something you have" (i.e. credit card) and "something you know" (i.e. card number). ==== Data integrity ==== Data integrity answers the question "Can the information be changed or corrupted in any way?" This leads to the assurance that the message received is identical to the message sent. A business needs to be confident that data is not changed in transit, whether deliberately or by accident. To help with data integrity, firewalls protect stored data against unauthorized access, while
Read more →
Content as a service (CaaS) or managed content as a service (MCaaS) is a service-oriented model, where the service provider delivers the content on demand to the service consumer via web services that are licensed under subscription. The content is hosted by the service provider centrally in the cloud and offered to a number of consumers that need the content delivered into any applications or system, hence content can be demanded by the consumers as and when required. Content as a Service is a way to provide raw content (in other words, without the need for a specific human compatible representation, such as HTML) in a way that other systems can make use of it. Content as a Service is not meant for direct human consumption, but rather for other platforms to consume and make use of the content according to their particular needs. This happens usually on the cloud, with a centralized platform which can be globally accessible and provides a standard format for your content. With Content as a Service, you centralize your content into a single repository, where you can manage it, categorize it, make it available to others, search for it, or do whatever you wish with it. == Overview == The content delivered typically could be one or more of the following The technical terminology related to equipment or spares that is required to procure or design the materials The industrial terminology of the equipment or spares Technical values pertaining to various types, specifications, applications, characteristics of equipment or spares Sourcing information which will help in procurement or supply-chain management of equipment or spares Descriptive specifications of equipment or spares based on the product reference number or identifier UNSPSC codes or industry practiced classifications ISO, IEC compliant terminology Ontology or Technical Dictionary of products & services Predefined content for specific business needs The term "Content as a service" (CaaS) is considered to be part of the nomenclature of cloud computing service models & Service-oriented architecture along with Software as a service (SaaS), Infrastructure as a service (IaaS), and Platform as a service (PaaS).
Read more →
This is a list of Fortran software and tools, including IDEs, compilers, libraries, debugging tools, numerical and scientific computing tools, and related projects. == Fortran compilers == Absoft Pro Fortran — Absoft Pro Fortran is discontinued and ran on Linux and macOS AOCC — from AMD Classic Flang — part of the LLVM Project LLVM Flang — part of the LLVM Project Fortran 77 — Fortran 77 was developed by Digital Equipment Corporation, it is discontinued. G95 – portable open-source Fortran 95 compiler GCC (GNU Fortran) PGI compilers – NVIDIA developed compilers after acquiring The Portland Group IBM XL Fortran — IBM XL Fortran is current and runs on Linux (Power/AIX) and integrates with Eclipse Intel Fortran Compiler – part of Intel OneAPI HPC toolkit LFortran — LFortran is current, cross-platform, and has IDE support. MinGW – cross compiler and forked into Mingw-w64 nAG Fortran Compiler - from nAG Open64 — Open64 is an open-source compiler that has been terminated and ran on Linux Open Watcom — Open Watcom is current, runs on MS-DOS and OS/2, and has IDE support. Oracle Fortran — Oracle Fortran is discontinued, ran on Linux and Solaris. ROSE — source-to-source compiler framework developed at Lawrence Livermore National Laboratory Silverfrost FTN95 — FTN95 from Silverfrost is current, runs on Windows, and has IDE support. == Integrated development environments (IDEs) and editors == Code::Blocks — supports Fortran with plugins Eclipse IDE — with Fortran support via Photran Emacs — extensible text editor with built-in Fortran modes and support for modern tooling via language servers Geany — lightweight cross-platform IDE based on GTK IntelliJ IDEA — cross-platform IDE by JetBrains with Fortran pluggin KDevelop — KDE-based IDE NetBeans — Apache software foundation IDE with Fortran configuration OpenWatcom — IDE and compiler suite for C, C++, and Fortran Simply Fortran — standalone Fortran IDE for Windows, Linux, and macOS Vim — modal text editor with native Fortran syntax support and extensive plugin-based development features Visual Studio — with Intel Fortran integration Visual Studio Code — supports Fortran via extensions == Mathematical libraries == == Scientific libraries == ABINIT — software suite to calculate optical, mechanical, vibrational, and other observable properties of materials Cantera — chemical kinetics, thermodynamics, and transport tool suite CERN Program Library — collection of Fortran libraries for physics applications from CERN CP2K — quantum chemistry and solid-state physics software package for atomistic simulations Dalton — molecular electronic structure program FFTPACK — subroutines for the fast Fourier transform Kinetic PreProcessor – open-source software tool used in atmospheric chemistry MESA — Modules for Experiments in Stellar Astrophysics Nek5000 — MPI parallel higher-order spectral element CFD solver NWChem — open-source high-performance computational chemistry software Octopus — real-space Time-Dependent Density Functional Theory code MODTRAN – model atmospheric propagation of electromagnetic radiation MOLCAS — quantum chemistry software package for multiconfigurational electronic structure calculations NOVAS – software library for astrometry-related numerical computations Physics Analysis Workstation – data analysis and graphical presentation in high-energy physics Quantum ESPRESSO — integrated suite for electronic-structure calculations and materials modeling SIESTA — first-principles materials simulation code using density functional theory Tinker — software tools for molecular design == Debugging and performance tools == GDB — GNU Debugger with Fortran support Valgrind — memory debugging and profiling tool VTune Profiler — performance analysis tool Allinea Forge — debugger and profiler for HPC applications == Build and package management == Autotools — build system supporting Fortran projects CMake — cross-platform build system supporting Fortran Make — build automation tool Spack — package manager for HPC software including Fortran libraries == Machine learning and AI libraries == Athena Fiats (Functional Inference And Training for Surrogates) FNN (Fortran Neural Network) FortNN Fortran-TF-lib (Fortran interface to TensorFlow) FTorch (Fortran interface to PyTorch) MlFortran RoseNNa == Parallel and high-performance computing tools == MPI Fortran bindings — standard interface for distributed-memory parallelism OpenMP — shared-memory parallel programming support through compiler directives Coarray Fortran — parallel programming model introduced in Fortran 2008 ScaLAPACK — parallel linear algebra package built on top of LAPACK == Testing frameworks == FUnit — open-source unit testing framework developed at NASA’s Langley Research Center, for Fortran 90, 95, and 2003. pFUnit — unit testing framework for Fortran, modeled after JUnit == Documentation and code analysis tools == FORD — automatic documentation generator for modern Fortran projects SQuORE — software quality and management platform with code analysis support Understand — static analysis and code comprehension tool for large Fortran projects
Read more →
Weak artificial intelligence (weak AI) is artificial intelligence that implements a limited part of the mind, or, as narrow AI, artificial narrow intelligence (ANI), is focused on one narrow task. Weak AI is contrasted with strong AI, which can be interpreted in various ways: Artificial general intelligence (AGI): a machine with the ability to apply intelligence to any problem, rather than just one specific problem. Artificial superintelligence (ASI): a machine with a vastly superior intelligence to the average human being. Artificial consciousness: a machine that has consciousness, sentience and mind (John Searle uses "strong AI" in this sense). Narrow AI can be classified as being "limited to a single, narrowly defined task. Most modern AI systems would be classified in this category." Artificial general intelligence is conversely the opposite. == Applications and risks == Some examples of narrow AI are AlphaGo, self-driving cars, robot systems used in the medical field, and diagnostic doctors. Narrow AI systems are sometimes dangerous if unreliable. And the behavior that it follows can become inconsistent. It could be difficult for the AI to grasp complex patterns and get to a solution that works reliably in various environments. This "brittleness" can cause it to fail in unpredictable ways. Narrow AI failures can sometimes have significant consequences. It could for example cause disruptions in the electric grid, damage nuclear power plants, cause global economic problems, and misdirect autonomous vehicles. Medicines could be incorrectly sorted and distributed. Also, medical diagnoses can ultimately have serious and sometimes deadly consequences if the AI is faulty or biased. Simple AI programs have already worked their way into society, oftentimes unnoticed by the public. Autocorrection for typing, speech recognition for speech-to-text programs, and vast expansions in the data science fields are examples. Narrow AI has also been the subject of some controversy, including resulting in unfair prison sentences, discrimination against women in the workplace for hiring, resulting in death via autonomous driving, among other cases. Despite being "narrow" AI, recommender systems are efficient at predicting user reactions based on their posts, patterns, or trends. For instance, TikTok's "For You" algorithm can determine a user's interests or preferences in less than an hour. Some other social media AI systems are used to detect bots that may be involved in propaganda or other potentially malicious activities. == Weak AI versus strong AI == John Searle contests the possibility of strong AI (by which he means conscious AI). He further believes that the Turing test (created by Alan Turing and originally called the "imitation game", used to assess whether a machine can converse indistinguishably from a human) is not accurate or appropriate for testing whether an AI is "strong". Scholars such as Antonio Lieto have argued that the current research on both AI and cognitive modelling are perfectly aligned with the weak-AI hypothesis (that should not be confused with the "general" vs "narrow" AI distinction) and that the popular assumption that cognitively inspired AI systems espouse the strong AI hypothesis is ill-posed and problematic since "artificial models of brain and mind can be used to understand mental phenomena without pretending that that they are the real phenomena that they are modelling" (as, on the other hand, implied by the strong AI assumption).
Read more →
Rapid application development (RAD), also called rapid application building (RAB), is both a general term for adaptive software development approaches, and the name for James Martin's method of rapid development. In general, RAD approaches to software development put less emphasis on planning and more emphasis on an adaptive process. Prototypes are often used in addition to or sometimes even instead of design specifications. RAD is especially well suited for (although not limited to) developing software that is driven by user interface requirements. Graphical user interface builders are often called rapid application development tools. Other approaches to rapid development include the adaptive, agile, spiral, and unified models. == History == Rapid application development was a response to plan-driven waterfall processes, developed in the 1970s and 1980s, such as the Structured Systems Analysis and Design Method (SSADM). One of the problems with these methods is that they were based on a traditional engineering model used to design and build things like bridges and buildings. Software is an inherently different kind of artifact. Software can change the process used to solve a problem. As a result, knowledge gained from the development process itself can feed back to the requirements and design of the solution. Plan-driven approaches attempt to define requirements, the solution, and the implementation plan, and have a process that discourages changes. RAD approaches, on the other hand, recognize that software development is a knowledge intensive process and provide flexible processes that help take advantage of knowledge gained during the project to improve or adapt the solution. The first such RAD alternative was developed by Barry Boehm and was known as the spiral model. Boehm and other subsequent RAD approaches emphasized developing prototypes as well as or instead of rigorous design specifications. Prototypes had several advantages over traditional specifications: Risk reduction. A prototype could test some of the most difficult potential parts of the system early on in the life-cycle. This can provide valuable information as to the feasibility of a design and can prevent the team from pursuing solutions that turn out to be too complex or time-consuming to implement. This benefit of finding problems earlier in the life-cycle rather than later was a key benefit of the RAD approach. The earlier a problem can be found the cheaper it is to address. Users are better at using and reacting than at creating specifications. In the waterfall model it was common for a user to sign off on a set of requirements but then when presented with an implemented system to suddenly realize that a given design lacked some critical features or was too complex. In general most users give much more useful feedback when they can experience a prototype of the running system rather than abstractly define what that system should be. Prototypes can be usable and can evolve into the completed product. One approach used in some RAD methods was to build the system as a series of prototypes that evolve from minimal functionality to moderately useful to the final completed system. The advantage of this besides the two advantages above was that the users could get useful business functionality much earlier in the process. Starting with the ideas of Barry Boehm and others, James Martin developed the rapid application development approach during the 1980s at IBM and finally formalized it by publishing a book in 1991, Rapid Application Development. This has resulted in some confusion over the term RAD even among IT professionals. It is important to distinguish between RAD as a general alternative to the waterfall model and RAD as the specific method created by Martin. The Martin method was tailored toward knowledge intensive and UI intensive business systems. These ideas were further developed and improved upon by RAD pioneers like James Kerr and Richard Hunter, who together wrote the seminal book on the subject, Inside RAD, which followed the journey of a RAD project manager as he drove and refined the RAD Methodology in real-time on an actual RAD project. These practitioners, and those like them, helped RAD gain popularity as an alternative to traditional systems project life cycle approaches. The RAD approach also matured during the period of peak interest in business re-engineering. The idea of business process re-engineering was to radically rethink core business processes such as sales and customer support with the new capabilities of Information Technology in mind. RAD was often an essential part of larger business re engineering programs. The rapid prototyping approach of RAD was a key tool to help users and analysts "think out of the box" about innovative ways that technology might radically reinvent a core business process. Much of James Martin's comfort with RAD stemmed from Dupont's Information Engineering division and its leader Scott Schultz and their respective relationships with John Underwood who headed up a bespoke RAD development company that pioneered many successful RAD projects in Australia and Hong Kong. Successful projects that included ANZ Bank, Lendlease, BHP, Coca-Cola Amatil, Alcan, Hong Kong Jockey Club and numerous others. Success that led to both Scott Shultz and James Martin both spending time in Australia with John Underwood to understand the methods and details of why Australia was disproportionately successful in implementing significant mission critical RAD projects. == James Martin approach == The James Martin approach to RAD divides the process into four distinct phases: Requirements planning phase – combines elements of the system planning and systems analysis phases of the systems development life cycle (SDLC). Users, managers, and IT staff members discuss and agree on business needs, project scope, constraints, and system requirements. It ends when the team agrees on the key issues and obtains management authorization to continue. User design phase – during this phase, users interact with systems analysts and develop models and prototypes that represent all system processes, inputs, and outputs. The RAD groups or subgroups typically use a combination of joint application design (JAD) techniques and CASE tools to translate user needs into working models. User design is a continuous interactive process that allows users to understand, modify, and eventually approve a working model of the system that meets their needs. Construction phase – focuses on program and application development task similar to the SDLC. In RAD, however, users continue to participate and can still suggest changes or improvements as actual screens or reports are developed. Its tasks are programming and application development, coding, unit-integration and system testing. Cutover phase – resembles the final tasks in the SDLC implementation phase, including data conversion, testing, changeover to the new system, and user training. Compared with traditional methods, the entire process is compressed. As a result, the new system is built, delivered, and placed in operation much sooner. == Advantages == In modern Information Technology environments, many systems are now built using some degree of Rapid Application Development (not necessarily the James Martin approach). In addition to Martin's method, agile methods and the Rational Unified Process are often used for RAD development. The purported advantages of RAD include: Better quality. By having users interact with evolving prototypes the business functionality from a RAD project can often be much higher than that achieved via a waterfall model. The software can be more usable and has a better chance to focus on business problems that are critical to end users rather than technical problems of interest to developers. However, this excludes other categories of what are usually known as Non-functional requirements (AKA constraints or quality attributes) including security and portability. Risk control. Although much of the literature on RAD focuses on speed and user involvement a critical feature of RAD done correctly is risk mitigation. It's worth remembering that Boehm initially characterized the spiral model as a risk based approach. A RAD approach can focus in early on the key risk factors and adjust to them based on empirical evidence collected in the early part of the process. E.g., the complexity of prototyping some of the most complex parts of the system. More projects completed on time and within budget. By focusing on the development of incremental units the chances for catastrophic failures that have dogged large waterfall projects is reduced. In the Waterfall model it was common to come to a realization after six months or more of analysis and development that required a radical rethinking of the entire system. With RAD this kind of information can be discovered and acted upon earlier in the proces
Read more →
Structural synthesis of programs (SSP) is a special form of (automatic) program synthesis that is based on propositional calculus. More precisely, it uses intuitionistic logic for describing the structure of a program in such a detail that the program can be automatically composed from pieces like subroutines or even computer commands. It is assumed that these pieces have been implemented correctly, hence no correctness verification of these pieces is needed. SSP is well suited for automatic composition of services for service-oriented architectures and for synthesis of large simulation programs. == History == Automatic program synthesis began in the artificial intelligence field, with software intended for automatic problem solving. The first program synthesizer was developed by Cordell Green in 1969. At about the same time, mathematicians including R. Constable, Z. Manna, and R. Waldinger explained the possible use of formal logic for automatic program synthesis. Practically applicable program synthesizers appeared considerably later. The idea of structural synthesis of programs was introduced at a conference on algorithms in modern mathematics and computer science organized by Andrey Ershov and Donald Knuth in 1979. The idea originated from G. Pólya’s well-known book on problem solving. The method for devising a plan for solving a problem in SSP was presented as a formal system. The inference rules of the system were restructured and justified in logic by G. Mints and E. Tyugu in 1982. A programming tool PRIZ that uses SSP was developed in the 1980s. A recent Integrated development environment that supports SSP is CoCoViLa — a model-based software development platform for implementing domain specific languages and developing large Java programs. == The logic of SSP == Structural synthesis of programs is a method for composing programs from already implemented components (e.g. from computer commands or software object methods) that can be considered as functions. A specification for synthesis is given in intuitionistic propositional logic by writing axioms about the applicability of functions. An axiom about the applicability of a function f is a logical implication X1 ∧ X2 ∧ ... ∧ Xm → Y1 ∧ Y2 ... Yn, where X1, X2, ... Xm are preconditions and Y1, Y2, ... Yn are postconditions of the application of the function f. In intuitionistic logic, the function f is called a realization of this formula. A precondition can be a proposition stating that input data exists, e.g. Xi may have the meaning “variable xi has received a value”, but it may denote also some other condition, e.g. that resources needed for using the function f are available, etc. A precondition may also be an implication of the same form as the axiom given above; then it is called a subtask. A subtask denotes a function that must be available as an input when the function f is applied. This function itself must be synthesized in the process of SSP. In this case, realization of the axiom is a higher order function, i.e., a function that uses another function as an input. For instance, the formula (state → nextState) ∧ initialState → result can specify a higher order function with two inputs and an output result. The first input is a function that has to be synthesized for computing nextState from state, and the second input is initialState. Higher order functions give generality to the SSP – any control structure needed in a synthesized program can be preprogrammed and used then automatically with a respective specification. In particular, the last axiom presented here is a specification of a complex program – a simulation engine for simulating dynamic systems on models where nextState can be computed from state of the system.
Read more →
Clean Email is an automated software as a service email management application which identifies and clears junk mail from inboxes. The service uses a subscription business model with a free trial for the first 1,000 emails. and is available on macOS, iOS, Android, and on the web. == History == Clean Email is a self-funded company headquartered in Los Angeles, California. Initially developed by the founder for personal use, the service was designed to address the growing issue of inbox clutter and privacy concerns. In 2017, John Gruber recognized Clean Email as a trustworthy alternative to Unroll.me after the latter was found to be selling user data. == Features == Clean Email uses algorithms to identify and categorize emails, enabling users to group, remove, label, and archive email messages in bulk. Its Unsubscriber tool consolidates all subscriptions and newsletters into a single view for quick management, allowing users to bulk unsubscribe or temporarily pause mail. Its Screener feature transforms the inbox into an "opt-in" system, enabling users to pre-approve mail from new senders. Cleaning Suggestions identifies frequently cleaned mail, recommending actions accordingly. Additional functionalities include automatic deletion of aging emails, delivery of messages to specified folders, and options to mute or block senders.
Read more →
Powerset was an American company based in San Francisco, California, that, in 2006, was developing a natural language search engine for the Internet. On July 1, 2008, Powerset was acquired by Microsoft for an estimated $100 million (~$143 million in 2024). Powerset was working on building a natural language search engine that could find targeted answers to user questions (as opposed to keyword based search). For example, when confronted with a question like "Which U.S. state has the highest income tax?", conventional search engines ignore the question phrasing and instead do a search on the keywords "state", "highest", "income", and "tax". Powerset on the other hand, attempts to use natural language processing to understand the nature of the question and return pages containing the answer. The company was in the process of "building a natural language search engine that reads and understands every sentence on the Web". The company has licensed natural language technology from PARC, the former Xerox Palo Alto Research Center. On May 11, 2008, the company unveiled a tool for searching a fixed subset of English Wikipedia using conversational phrases rather than keywords. Acquisition by Microsoft: One significant milestone in Powerset's history was its acquisition by Microsoft on July 1, 2008, for an estimated $100 million. This acquisition was part of Microsoft's broader strategy to enhance its search capabilities and compete more effectively with other search engine providers, particularly Google. Natural Language Search Engine: Powerset's primary focus was on developing a natural language search engine capable of understanding and interpreting user queries in a more human-like manner. Instead of simply matching keywords, Powerset aimed to comprehend the meaning behind the words, allowing for more accurate and contextually relevant search results. Technology and Partnerships: Powerset had licensed natural language technology from PARC, the Xerox Palo Alto Research Center. This technology likely played a crucial role in the development of Powerset's NLP capabilities. Wikipedia Search Tool: In May 2008, Powerset unveiled a search tool that allowed users to search a fixed subset of English Wikipedia using conversational phrases rather than traditional keywords. This demonstrated the potential of Powerset's NLP technology in providing more precise and relevant search results. == Powerlabs == In a form of beta testing, Powerset opened an online community called Powerlabs on September 17, 2007. Business Week said: "The company hopes the site will marshal thousands of people to help build and improve its search engine before it goes public next year." Said The New York Times: "[Powerset Labs] goes far beyond the 'alpha' or 'beta' testing involved in most software projects, when users put a new product through rigorous testing to find its flaws. Powerset doesn’t have a product yet, but rather a collection of promising natural language technologies, which are the fruit of years of research at Xerox PARC." Powerlabs' initial search results are taken from Wikipedia. == Notable people == Barney Pell (born March 18, 1968, in Hollywood, California) was co-founder and CEO of Powerset. Pell received his Bachelor of Science degree in symbolic systems from Stanford University in 1989, where he graduated Phi Beta Kappa and was a National Merit Scholar. Pell received a PhD in computer science from Cambridge University in 1993, where he was a Marshall Scholar. He has worked at NASA, as chief strategist and vice president of business development at StockMaster.com (acquired by Red Herring in March, 2000) and at Whizbang! Labs. Prior to joining Powerset, Pell was an Entrepreneur-in-Residence at Mayfield Fund, a venture capital firm in Silicon Valley. Pell is also a founder of Moon Express, Inc., a U.S. company awarded a $10M commercial lunar contract by NASA and a competitor in the Google Lunar X PRIZE. Steve Newcomb was the COO and co-founder of Powerset. Prior to joining Powerset, he was a co-founder of Loudfire, General Manager at Promptu, and was on the board of directors at Jaxtr. He left Powerset in October 2007 to form Virgance, a social startup incubator. Lorenzo Thione (born in Como, Italy) was the product architect and co-founder of Powerset. Prior to joining Powerset, he worked at FXPAL in natural language processing and related research fields. Thione earned his master's degree in software engineering from the University of Texas at Austin. Ronald Kaplan, former manager of research in Natural Language Theory and Technology at PARC, served as the company's CTO and CSO. Ryan Ferrier is a member of the founding team of Powerset. He managed personnel and internal operations. After 2008 he went on to co-found Serious Business, which made Facebook applications and was later bought by Zynga. Another Powerset alumnus, Alex Le, became CTO of Serious Business and went on to become an executive producer at Zynga when it bought the company. Siqi Chen founded a stealth startup in mobile computing after leaving Powerset. Tom Preston-Werner worked at Powerset and left after the acquisition to found GitHub. == Investors == Powerset attracted a wide range of investors, many of whom had considerable experience in the venture capital field. The company received $12.5 million (~$18.2 million in 2024) in Series A funding during November 2007, co-led by the venture capital firms Foundation Capital and The Founders Fund. Among the better-known investors: Esther Dyson, founding chairman of ICANN, founder of the newsletter Release 1.0 and editor at Cnet Peter Thiel, founder and former CEO of PayPal Luke Nosek, founder of PayPal Todd Parker. Managing Partner, Hidden River Ventures Reid Hoffman, executive vice president of PayPal and founder of LinkedIn First Round Capital, seed-stage venture firm
Read more →
This is a list of Haskell software and tools, including compilers, interpreters, build tools, package managers, integrated development environments, libraries, and other development utilities. == Compilers, interpreters and editors == Emacs — text editor Glasgow Haskell Compiler (GHC) Hugs — bytecode interpreter (discontinued) IntelliJ IDEA — IDE with Haskell support via plugins Vim — text editor Visual Studio Code — editor/IDE with Haskell support via extensions == Libraries and frameworks == Parsec — parser combinator library Servant — web framework Yesod — web framework == Build tools and package management == Cabal — build system and packaging infrastructure Haskell Platform — bundled distribution of Haskell tools and libraries (deprecated) Stack — build tool and dependency manager == Language tools and static analysis == Fourmolu — code formatter based on Ormolu Haskell Language Server — implementation of the Language Server Protocol for Haskell HLint — source code suggestion and linting tool Hoogle — Haskell API search engine Ormolu — code formatter Stan — static analysis tool Stylish Haskell — source code formatter == Interactive environments == GHCi — interactive REPL for the Glasgow Haskell Compiler IHaskell — Jupyter kernel for Haskell == Debugging and profiling tools == hp2ps — heap profiling visualization tool ThreadScope — parallel execution visualizer for Haskell programs == Documentation generators == Haddock — API documentation generator for Haskell == Parser and lexer generators == Alex — lexer generator for Haskell Happy — parser generator for Haskell == Testing frameworks == HUnit — unit testing framework QuickCheck — property-based testing library == Version control == Darcs — distributed version control system written in Haskell
Read more →
BioBike(nee. BioLingua ) is a cloud-based, through-the-web programmable (Paas) symbolic biocomputing and bioinformatics platform that aims to make computational biology, and especially intelligent biocomputing (that is, the application of Artificial Intelligence to computational biology) accessible to research scientists who are not expert programmers. == Unique capabilities == BioBIKE is an integrated symbolic biocomputing and bioinformatics platform, built from the start as an entirely (what is now called) cloud-based architecture where all computing is done in remote servers, and all user access is accomplished through web browsers. BioBIKE has a built-in frame system in which all objects, data, and knowledge are represented. This enables code written either in the native Lisp, in the visual programming language, or systems of rules expressed in the SNARK theorem prover to access the whole of biological knowledge in an integrated manner. For its time (released in 2002) it was unique in permitting users to create fully functional biocomputing programs that run on the back-end servers entirely through the web browser UI. (In modern terms it was one of the first PaaS (Platform as a Service) systems, predating even Salesforce in this capability.) Initially this programming was carried out in raw Lisp, but Jeff Elhai's team at VCU, with NSF funding, created an entirely graphical programming environment on top of BioBIKE based upon the Boxer-style programming environments. Being a multi-headed, multi-threaded, multi-user, multi-tenancy cloud-based system, BioBIKE users were able to directly work together through their web browsers, remotely sharing the same listener and memory space. This permitted a unique sort of collaboration, discussed in Shrager (2007). A specialized offshoot of BioBIKE called "BioDeducta" includes SRI's SNARK theorem prover, offering unique "deductive biocomputing" capabilities. == Implementation == BioBIKE is open-source software implemented using the Lisp programming language. Continuing development takes place by the BioBIKE team centered at Virginia Commonwealth University . == History == BioBIKE was originally called "BioLingua", and was developed by Jeff Shrager at The Carnegie Inst. of Washington Dept. of Plant Biology, and JP Massar with funding from NASA's Astrobiology Division. Shrager and Massar wanted to create a web-based, multi-user Lisp Machine, specialized for bioinformatics. Other early contributors to the project included Mike Travers, and Jeff Elhai of VCU. Elhai obtained continuing funding from the National Science Foundation for the project, which was renamed BioBIKE. Elhai and colleagues added BioBIKE's unique visual programming language. Shrager, meanwhile, collaborated with Richard Waldinger at SRI to build SRI's (SNARK) theorem prover into BioBIKE, creating a deductive biocomputing system, called BioDeducta. == Instances == There used to be a number of BioBIKE verticals in different biological domains, including viral pathogens, cyanobacteria and other bacteria, Arabidopsis thaliana, and several others described in the references.
Read more →