Best AI Image Generators

Best AI Image Generators — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

Image-based modeling and rendering

In computer graphics and computer vision, image-based modeling and rendering (IBMR) methods rely on a set of two-dimensional images of a scene to generate a three-dimensional model and then render some novel views of this scene. The traditional approach of computer graphics has been used to create a geometric model in 3D and try to reproject it onto a two-dimensional image. Computer vision, conversely, is mostly focused on detecting, grouping, and extracting features (edges, faces, etc.) present in a given picture and then trying to interpret them as three-dimensional clues. Image-based modeling and rendering allows the use of multiple two-dimensional images in order to generate directly novel two-dimensional images, skipping the manual modeling stage. == Light modeling == Instead of considering only the physical model of a solid, IBMR methods usually focus more on light modeling. The fundamental concept behind IBMR is the plenoptic illumination function which is a parametrisation of the light field. The plenoptic function describes the light rays contained in a given volume. It can be represented with seven dimensions: a ray is defined by its position ( x , y , z ) {\displaystyle (x,y,z)} , its orientation ( θ , ϕ ) {\displaystyle (\theta ,\phi )} , its wavelength ( λ ) {\displaystyle (\lambda )} and its time ( t ) {\displaystyle (t)} : P ( x , y , z , θ , ϕ , λ , t ) {\displaystyle P(x,y,z,\theta ,\phi ,\lambda ,t)} . IBMR methods try to approximate the plenoptic function to render a novel set of two-dimensional images from another. Given the high dimensionality of this function, practical methods place constraints on the parameters in order to reduce this number (typically to 2 to 4). == IBMR methods and algorithms == View morphing generates a transition between images Panoramic imaging renders panoramas using image mosaics of individual still images Lumigraph relies on a dense sampling of a scene Space carving generates a 3D model based on a photo-consistency check
Read more →
Sub-pixel resolution

In digital image processing, sub-pixel resolution can be obtained in images constructed from sources with information exceeding the nominal pixel resolution of said images. == Example == For example, if the image of a ship of length 50 metres (160 ft), viewed side-on, is 500 pixels long, the nominal resolution (pixel size) on the side of the ship facing the camera is 0.1 metres (3.9 in). Now sub-pixel resolution of well resolved features can measure ship movements which are an order of magnitude (10×) smaller. Movement is specifically mentioned here because measuring absolute positions requires an accurate lens model and known reference points within the image to achieve sub-pixel position accuracy. Small movements can however be measured (down to 1 cm) with simple calibration procedures. Specific fit functions often suffer specific bias with respect to image pixel boundaries. Users should therefore take care to avoid these "pixel locking" (or "peak locking") effects. == Determining feasibility == Whether features in a digital image are sharp enough to achieve sub-pixel resolution can be quantified by measuring the point spread function (PSF) of an isolated point in the image. If the image does not contain isolated points, similar methods can be applied to edges in the image. It is also important when attempting sub-pixel resolution to keep image noise to a minimum. This, in the case of a stationary scene, can be measured from a time series of images. Appropriate pixel averaging, through both time (for stationary images) and space (for uniform regions of the image) is often used to prepare the image for sub-pixel resolution measurements.
Read more →
RIPAC (microprocessor)

RIPAC was a VLSI single-chip microprocessor designed for automatic recognition of the connected speech, one of the first of this use. The project of the microprocessor RIPAC started in 1984. RIPAC was aimed to provide efficient real-time speech recognition services to the italian telephone system provided by SIP. The microprocessor was presented in September 1986 at The Hague (Netherlands) at EUSPICO conference. It was composed of 70.000 transistors and structured as Harvard architecture. The name RIPAC is the acronym for "Riconoscimento del PArlato Connesso", that means "Recognition of the connected speech" in Italian. The microprocessor was designed by the Italian companies CSELT and ELSAG and was produced by SGS: a combination of Hidden Markov Model and Dynamic Time Warping algorithms was used for processing speech signals. It was able to do real-time speech recognition of Italian and many languages with a good affordability. The chip, issued by U.S. Patent No. 4,907,278, worked at first run.
Read more →
Odor source localization

Odor source localization (OSL) is the problem of locating the origin of an airborne or waterborne chemical plume using one or more mobile sensors, typically robots equipped with chemical sensors. The task sits at the intersection of robotics, fluid dynamics and machine olfaction. Chemical plumes in turbulent flows are intermittent and patchy, and most chemical sensors respond slowly and have limited selectivity, so the instantaneous reading available to a moving sensor is a poor proxy for the underlying time-averaged concentration field. Robotic OSL has been studied since the late 1980s and has applications including the detection of gas leaks, search and rescue after industrial accidents, and environmental monitoring of industrial emissions. == History == Robotic odor search emerged in the late 1980s and 1990s, drawing on earlier work in chemical ecology that had described how moths and other insects locate distant pheromone sources. R. A. Russell at Monash University was among the first to build mobile robots that followed chemical trails on the floor and tracked airborne odor plumes. Distributed and multi-robot odor search were investigated by Hayes, Martinoli and Goodman at the California Institute of Technology and EPFL, who studied cooperative plume-tracing on simulated and physical robot swarms. In 2007 Vergassola, Villermaux and Shraiman introduced infotaxis, an information-theoretic search strategy in which a sensor moves so as to maximize the expected information gain about source location, rather than following a chemical concentration gradient; the paper appeared in Nature and prompted substantial follow-up work in the robotics community. From the mid-2010s, multi-rotor unmanned aerial vehicles carrying lightweight chemical sensors became a common experimental platform for OSL research. == Problem formulation == OSL is generally decomposed into three sub-problems: plume detection (deciding whether a chemical signal is present), plume traversal (moving so as to remain in contact with the plume), and source declaration (deciding when the source has been reached). The mathematical difficulty depends strongly on the assumed dispersion model. In laminar or low-Reynolds number flows a Gaussian advection–diffusion model gives a smooth concentration field with a well-defined gradient. In turbulent flows, which dominate most realistic environments, the plume is filamentary: the sensor receives short, randomly spaced bursts of chemical separated by periods of zero signal, and the time-averaged field is not a useful guide on the time scales at which a robot must act. Source-term estimation, surveyed by Hutchinson and colleagues, additionally aims to recover both the position and the release rate of the source from the observed concentrations, often using probabilistic filters. == Biological inspiration == Many OSL strategies are explicitly modeled on the behavior of male moths flying upwind toward a pheromone source. As reviewed by Cardé and Willis, moths combine an upwind surge whenever they detect a filament of pheromone with a wider crosswind cast when contact is lost, producing a characteristic zig-zag trajectory that has been transposed onto mobile robots by several groups. Other biological models draw on the search behavior of dogs and of marine animals such as blue crabs and lobsters, which integrate chemical and bilateral hydrodynamic cues over much shorter ranges. == Algorithms and strategies == === Reactive strategies === Reactive strategies select the next motion as a direct function of the current sensor reading. Chemotaxis steers along the locally estimated concentration gradient, which is effective in laminar plumes but degrades severely in turbulence. Anemotaxis exploits a measured wind direction by surging upwind when chemical contact is made. The bio-inspired cast-and-surge family combines anemotaxis with a deterministic crosswind cast on contact loss, and is the dominant reactive approach for turbulent environments. === Probabilistic and information-theoretic strategies === Probabilistic methods maintain a posterior distribution over possible source locations and choose actions that improve that distribution. The infotaxis strategy of Vergassola, Villermaux and Shraiman selects the move that maximizes the expected reduction in entropy of the source-location posterior, and is effective in regimes where the spatial gradient is unusable. Bayesian source-term estimation extends this idea by inferring both source position and release rate, typically using particle filters or sequential Monte Carlo. === Map-based strategies === Map-based methods build a spatial model of the time-averaged gas distribution from sensor readings collected along the robot's trajectory and search for local maxima in that model. Lilienthal and colleagues describe a family of kernel-based gas distribution mapping techniques in which point measurements are convolved with a Gaussian kernel to produce a spatially extrapolated estimate. Such methods are most useful when the source can be assumed quasi-stationary and the robot is able to revisit locations. === Multi-robot and swarm strategies === Multiple robots searching cooperatively can shorten search times. Cooperative formations spread the sensors across the crosswind axis, making detection of an intermittent plume more likely. Swarm-based approaches, reviewed by Wang and colleagues, deploy larger numbers of simpler agents and rely on collective behavior rather than centralized planning; reported advantages include improved coverage of the search area and the possibility of locating multiple sources in parallel. == Sensors and platforms == Most OSL systems use metal-oxide semiconductor (MOX) sensors, photoionization detectors or electrochemical cells, which trade off sensitivity, selectivity, response time and power consumption. Ishida and colleagues describe how these sensors interact with airflow around the robot body, an effect that motivates careful aerodynamic design and active sampling. Mobile platforms include wheeled ground robots for indoor and structured outdoor environments, multi-rotor unmanned aerial vehicles for open spaces and elevated sources, and autonomous underwater vehicles for chemical plumes in the marine environment. == Notable systems == Among the early demonstrations, R. A. Russell's series of differential-drive robots at Monash University localized volatile sources in still and ventilated rooms during the 1990s. The Smelling Nano Aerial Vehicle reported by Burgués and colleagues used a Crazyflie nano-quadcopter (approximately 27 grams in mass and 10 cm across) carrying a custom MOX gas sensing board, and built three-dimensional gas distribution maps of indoor releases from sweeping flights of less than three minutes. The GADEN simulator, released by Monroy and colleagues, couples three-dimensional dispersion computed from an OpenFOAM CFD solver with models of MOX and photo-ionization gas sensors, and is widely used to test mobile-robot olfaction algorithms in simulation. == Applications == Reported applications include the localization of natural-gas and methane leaks in urban infrastructure, search for chemical contamination after industrial accidents, search and rescue, and environmental monitoring of industrial emissions. Drug- and explosives-detection robots are an adjacent application area, although these typically rely on close-range sniffing rather than long-range plume tracking. == Open challenges == Open challenges identified in recent reviews include the limited speed, selectivity and stability of available chemical sensors; the scarcity of standardized, large-scale benchmarks comparable to those available in computer vision; reliable handling of multi-source environments, where standard single-source assumptions fail; and the integration of OSL with other autonomous-vehicle subsystems such as obstacle avoidance and navigation in three-dimensional turbulent flow.
Read more →
Image texture

An image texture is the small-scale structure perceived on an image, based on the spatial arrangement of color or intensities. It can be quantified by a set of metrics calculated in image processing. Image texture metrics give us information about the whole image or selected regions. Image textures can be artificially created or found in natural scenes captured in an image. Image textures are one way that can be used to help in segmentation or classification of images. For more accurate segmentation the most useful features are spatial frequency and an average grey level. To analyze an image texture in computer graphics, there are two ways to approach the issue: structured approach and statistical approach. == Structured approach == A structured approach sees an image texture as a set of primitive texels in some regular or repeated pattern. This works well when analyzing artificial textures. To obtain a structured description a characterization of the spatial relationship of the texels is gathered by using Voronoi tessellation of the texels. == Statistical approach == A statistical approach sees an image texture as a quantitative measure of the arrangement of intensities in a region. In general this approach is easier to compute and is more widely used, since natural textures are made of patterns of irregular subelements. === Edge detection === The use of edge detection is to determine the number of edge pixels in a specified region, helps determine a characteristic of texture complexity. After edges have been found the direction of the edges can also be applied as a characteristic of texture and can be useful in determining patterns in the texture. These directions can be represented as an average or in a histogram. Consider a region with N pixels. the gradient-based edge detector is applied to this region by producing two outputs for each pixel p: the gradient magnitude Mag(p) and the gradient direction Dir(p). The edgeness per unit area can be defined by F e d g e n e s s = | { p | M a g ( p ) > T } | N {\displaystyle F_{edgeness}={\frac {|\{p|Mag(p)>T\}|}{N}}} for some threshold T. To include orientation with edgeness histograms for both gradient magnitude and gradient direction can be used. Hmag(R) denotes the normalized histogram of gradient magnitudes of region R, and Hdir(R) denotes the normalized histogram of gradient orientations of region R. Both are normalized according to the size NR Then F m a g , d i r = ( H m a g ( R ) , H d i r ( R ) ) {\displaystyle F_{mag,dir}=(H_{mag}(R),H_{dir}(R))} is a quantitative texture description of region R. === Co-occurrence matrices === The co-occurrence matrix captures numerical features of a texture using spatial relations of similar gray tones. Numerical features computed from the co-occurrence matrix can be used to represent, compare, and classify textures. The following are a subset of standard features derivable from a normalized co-occurrence matrix: A n g u l a r 2 n d M o m e n t = ∑ i ∑ j p [ i , j ] 2 C o n t r a s t = ∑ i = 1 N g ∑ j = 1 N g n 2 p [ i , j ] , where | i − j | = n C o r r e l a t i o n = ∑ i = 1 N g ∑ j = 1 N g ( i j ) p [ i , j ] − μ x μ y σ x σ y E n t r o p y = − ∑ i ∑ j p [ i , j ] l n ( p [ i , j ] ) {\displaystyle {\begin{aligned}Angular{\text{ }}2nd{\text{ }}Moment&=\sum _{i}\sum _{j}p[i,j]^{2}\\Contrast&=\sum _{i=1}^{Ng}\sum _{j=1}^{Ng}n^{2}p[i,j]{\text{, where }}|i-j|=n\\Correlation&={\frac {\sum _{i=1}^{Ng}\sum _{j=1}^{Ng}(ij)p[i,j]-\mu _{x}\mu _{y}}{\sigma _{x}\sigma _{y}}}\\Entropy&=-\sum _{i}\sum _{j}p[i,j]ln(p[i,j])\\\end{aligned}}} where p [ i , j ] {\displaystyle p[i,j]} is the [ i , j ] {\displaystyle [i,j]} th entry in a gray-tone spatial dependence matrix, and Ng is the number of distinct gray-levels in the quantized image. One negative aspect of the co-occurrence matrix is that the extracted features do not necessarily correspond to visual perception. It is used in dentistry for the objective evaluation of lesions [DOI: 10.1155/2020/8831161], treatment efficacy [DOI: 10.3390/ma13163614; DOI: 10.11607/jomi.5686; DOI: 10.3390/ma13173854; DOI: 10.3390/ma13132935] and bone reconstruction during healing [DOI: 10.5114/aoms.2013.33557; DOI: 10.1259/dmfr/22185098; EID: 2-s2.0-81455161223; DOI: 10.3390/ma13163649]. === Laws texture energy measures === Another approach is to use local masks to detect various types of texture features. Laws originally used four vectors representing texture features to create sixteen 2D masks from the outer products of the pairs of vectors. The four vectors and relevant features were as follows: L5 = [ +1 +4 6 +4 +1 ] (Level) E5 = [ -1 -2 0 +2 +1 ] (Edge) S5 = [ -1 0 2 0 -1 ] (Spot) R5 = [ +1 -4 6 -4 +1 ] (Ripple) To these 4, a fifth is sometimes added: W5 = [ -1 +2 0 -2 +1 ] (Wave) From Laws' 4 vectors, 16 5x5 "energy maps" are then filtered down to 9 in order to remove certain symmetric pairs. For instance, L5E5 measures vertical edge content and E5L5 measures horizontal edge content. The average of these two measures is the "edginess" of the content. The resulting 9 maps used by Laws are as follows: L5E5/E5L5 L5R5/R5L5 E5S5/S5E5 S5S5 R5R5 L5S5/S5L5 E5E5 E5R5/R5E5 S5R5/R5S5 Running each of these nine maps over an image to create a new image of the value of the origin ([2,2]) results in 9 "energy maps," or conceptually an image with each pixel associated with a vector of 9 texture attributes. === Autocorrelation and power spectrum === The autocorrelation function of an image can be used to detect repetitive patterns of textures. == Texture segmentation == The use of image texture can be used as a description for regions into segments. There are two main types of segmentation based on image texture, region based and boundary based. Though image texture is not a perfect measure for segmentation it is used along with other measures, such as color, that helps solve segmenting in image. === Region based === Attempts to group or cluster pixels based on texture properties. === Boundary based === Attempts to group or cluster pixels based on edges between pixels that come from different texture properties.
Read more →
Desktop video

Desktop video refers to a phenomenon lasting from the mid-1980s to the early 1990s when the graphics capabilities of personal computers such as the Amiga, Macintosh II, and specially-upgraded IBM PC compatibles had advanced to the point where individuals and local broadcasters could use them for analog non-linear editing and vision mixing in video production. Despite the use of computers, desktop video should not be confused with digital video since the video data remained analog, and it uses items like a VCR and a camcorder to record the video. Full-screen, full-motion video's vast storage requirements meant that the promise of digital encoding would not be realized on desktop computers for at least another decade. == Description == There were multiple models of genlock cards available to synchronize the content; the Newtek Video Toaster was commonly used in Amiga in countries that used NTSC (PAL-M in Brazil), while PCs had Truevision and Matrox Illuminator cards and Mac systems had the SuperMac Video Spigot and Radius VideoVision cards. Apple later introduced the Macintosh Quadra 840AV and Centris 660AV systems to specifically address this market. Desktop video was a parallel development to desktop publishing and enabled many small production houses and local TV stations to produce their own original content for the first time. Along with the advent of public-access cable channels, desktop video meant that television advertising became affordable for local businesses such as retailers, restaurants, real estate agents, contractors and auto dealers. As with the phrase desktop publishing, use of the term died out as the technologies to which it referred become the norm for any kind of video production.
Read more →
Teleradiology

Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.
Read more →
Buckeye Corpus

The Buckeye Corpus of conversational speech is a speech corpus created by a team of linguists and psychologists at Ohio State University led by Prof. Mark Pitt. It contains high-quality recordings from 40 speakers in Columbus, Ohio conversing freely with an interviewer. The interviewer's voice is heard only faintly in the background of these recordings. The sessions were conducted as Sociolinguistics interviews, and are essentially monologues. The speech has been orthographically transcribed and phonetically labeled. The audio and text files, together with time-aligned phonetic labels, are stored in a format for use with speech analysis software (Xwaves and Wavesurfer). Software for searching the transcription files is also available at the project web site. The corpus is available to researchers in academia and industry. The project was funded by the National Institute on Deafness and Other Communication Disorders and the Office of Research at Ohio State University.
Read more →
Pharmacy automation

Pharmacy automation involves the mechanical processes of handling and distributing medications. Any pharmacy task may be involved, including counting small objects (e.g., tablets, capsules); measuring and mixing powders and liquids for compounding; tracking and updating customer information in databases (e.g., personally identifiable information (PII), medical history, drug interaction risk detection); and inventory management. This article focuses on the changes that have taken place in the local, or community pharmacy since the 1960s. == History == Dispensing medications in a community pharmacy before the 1970s was a time-consuming operation. The pharmacist dispensed prescriptions in tablet or capsule form with a simple tray and spatula. Many new medications were developed by pharmaceutical manufacturers at an ever-increasing pace, and medications prices were rising steeply. A typical community pharmacist was working longer hours and often forced to hire staff to handle increased workloads which resulted in less time to focus on safety issues. These additional factors led to use of a machine to count medications. The original electronic portable digital tablet counting technology was invented in Manchester, England between 1967 and 1970 by the brothers John and Frank Kirby. I had the original idea of how the machine would work and it was my patent, but it was a joint effort getting it to work in a saleable form. It was 3 years of very hard work. I had originally studied heavy electrical engineering before changing over to Medical School and qualifying as a Medical Doctor in 1968. In fact I was Senior House (Casualty) Officer (A&E or ER) in 1970 at North Manchester General Hospital when I filed the patent. I must have been the only hospital doctor in Britain with an oscilloscope, a soldering iron and a drawing board in his room in the Doctors' Residence. The housekeepers were bemused by all the wires. Frank originally trained as a Banker but quit to take a job with a local electronics firm during the development. He died in 1987, a terrible loss. [Extract from personal communication received in March 2010 from John Kirby.] Frank and John Kirby and their associate Rodney Lester were pioneers in pharmacy automation and small-object counting technology. In 1967, the Kirbys invented a portable digital tablet counter to count tablets and capsules. With Lester they formed a limited company. In 1970, their invention was patented and put into production in Oldham, England. The tablet counter aided the pharmacy industry with time-consuming manual counting of drug prescriptions. A counting machine consistently counted medications accurately and quickly. This aspect of pharmacy automation was quickly adopted, and innovations emerged every decade to aid the pharmacy industry to deliver medications quickly, safely, and economically. Modern pharmacies have many new options to improve their workflow by using the new technology, and can choose intelligently from the many options available. === Chronology === On 1 January 1971 commercial production of the first portable digital tablet counters in the World began. John Kirby had filed U.K. Patent number GB1358378(A) on 8 September 1970 and U.S. patent number 3789194 on 9 August 1971. These early electronic counters were designed to help pharmacies replace the common (but often inaccurate) practice of counting medications by hand. In 1975, the digital technology was exported to America. In early 1980 a dedicated research, development and production facility was built in Oldham, England at a cost of £500,000. Between 1982 and 1983, two separate development facilities had been created. In America, overseen by Rodney Lester; and in England, overseen by the Kirby brothers. In 1987, Frank Kirby died. In 1989, John Kirby moved his UK facility to Devon, England. A simple to operate machine had been developed to accurately and quickly count prescription medications. Technology improvements soon resulted in a more compact model. The price of such equipment in 1980 was around £1,300. This substantial investment in new technology was a major financial consideration, but the pharmacy community considered the use of a counting machine as a superior method compared to hand-counting medications. These early devices became known as tablet counter, capsule counter, pill counter, or drug counter. The new counting technology replaced manual methods in many industries such as, vitamin and diet supplement manufacturing. Technicians needed a small, affordable device to count and bottle medications. In England and America, the 1980s and 1990s saw new the development of high-speed machines for counting and bottle filling, Like their pharmacy-based counterparts, these industrial units were designed to be fast and simple to operate, yet remain small and cost effective. In America, in the late 1990s/early 2000s a new type of tablet counter appeared. It was simple to use, compact, inexpensive, and had good counting accuracy. At the turn of the millennium technical advances allowed the design of counters with a software verification system. With an onboard computer, displaying photo images of medications to assist the pharmacist or pharmacy technician to verify that the correct medication was being dispensed. In addition, a database for storing all prescriptions that were counted on the device. Between September 2005 and May 2007, American Capital made a major financial investment in Kirby Lester, which then relocated to a larger facility to expand its research and development capabilities. This move added extra space for product research and development facility (R&D). It allowed the opportunity to develop new advanced technology products that met the pharmacy's needs for simple, accurate, and cost-effective ways to dispense prescriptions safely. Pictured here is an early American type of integrated counter and packaging device. This machine was a third generation step in the evolution of pharmacy automated devices. Later models held pre-counted containers of commonly-prescribed medications. == Global variations == In the EU member states legislation was introduced in 1998 which had a major effect on UK Pharmacy operations. It effectively prohibited the use of tablet counters for counting and dispensing bulk packaged tablets. Both usage and sales of the machines in the UK declined rapidly as a result of the introduction of blister packaging for medicines. == Current state of the industry == A tablet counter has become a standard in more than 30,000 sites in 35 countries (as of 2010) (including many non-pharmacy sites, such as manufacturing facilities that use a counting machine as a check for small items). During the 1990s through 2012, numerous new pharmacy automation products came to market. During this timeframe, counting technologies, robotics, workflow management software, and interactive voice recognition (IVR) systems for retail (both chain and independent), outpatient, government, and closed-door pharmacies (mail order and central fill) were all introduced. Additionally, the concept of scalability - of migrating from an entry-level product to the next level of automation (e.g., counting technology to robotics) - was introduced and subsequently launched a new product line in 1997. Pharmacists everywhere are making the switch to automation for its increased speed, greater accuracy, and better security. As the industry evolves and customer expectations grow, automation is becoming less of a luxury and more of a necessity. Especially for independent pharmacies, automation is now a means of keeping up with the competition of large chain pharmacies. == Technological changes and design improvements == Constant developments in technology make the dispensing of prescription medications safer, more accurate and more efficient. In America, in 2008, "next-generation" counting and verification systems were introduced. Based on the counting technology employed in preceding models, later machines included the ability to help the pharmacy operate more effectively. Equipped with a new computer interface to a pharmacy management system, with workflow and inventory software. It also included "checks and balances" to ensure the technician and pharmacist were dispensing the correct medication for each patient. This is something that is important to keep reported correctly when dealing with controlled substances like narcotics. This was a step forward to verify all 100% of prescriptions that were dispensed by pharmacy staff. In America, in 2009, further advanced counters were designed that included the ability to dispense hands-free – a feature that many operators had desired. This allowed pharmacies to automate their most commonly dispensed medications via calibrated cassettes. Thirty of a pharmacy's common medications would now be dispensed automatically. Another new model doubled that throughput via an enclosed robotic mechanism. Robo
Read more →
NER model

NER is one of several formulas for accessing live subtitles in television broadcasts and events that are produced using speech recognition. The three letters stand for number, edit error and recognition error. It has been promoted as an alternative to Word error rate (Word Error Rate) which is a more objective measure. The overall score is calculated as follows: Firstly, the number of edit and recognition errors is deducted from the total number of words in the live subtitles. This number is then divided by the total number of words in the live subtitles and finally multiplied by one hundred. N E R v a l u e = N − E − R N ∗ 100 {\displaystyle NERvalue={\frac {N-E-R}{N}}100} . The acronyms stand for the following: N (number) = total number of words in the live subtitles E (Edit error) = edit error R (Recognition error) = recognition error This measurement process has been used for public television broadcasts in European countries like Italy and Switzerland. One major drawback with NER is that it requires a human assessor to rate errors as either: 1 Minor edition or recognition errors 2 Normal edition or recognition errors 3 Serious errors which are then weighted in the assessment process. This is both subjective, time consuming and costly. Also, NER fails to account for words left out subtitles which is something that does not take account of the D/deaf audience who want verbatim subtitles. As a result, NER cannot accurately reflect the audience's experience of subtitles. Another problem is the inconsistency of human evaluation of subtitles, particularly with live subtitles, where there are differing opinions of the importance of subtitle errors. By way of contrast, Word error rate is an objective measure of subtitle errors, since it measures the textual discrepancy between the subtitles and the speech.
Read more →
Structural similarity index measure

The structural similarity index measure (SSIM) is a method for predicting the perceived quality of digital television and cinematic pictures, as well as other kinds of digital images and videos. It is also used for measuring the similarity between two images. The SSIM index is a full reference metric; in other words, the measurement or prediction of image quality is based on an initial uncompressed or distortion-free image as reference. SSIM is a perception-based model that considers image degradation as perceived change in structural information, while also incorporating important perceptual phenomena, including both luminance masking and contrast masking terms. This distinguishes from other techniques such as mean squared error (MSE) or peak signal-to-noise ratio (PSNR) that instead estimate absolute errors. Structural information is the idea that the pixels have strong inter-dependencies especially when they are spatially close. These dependencies carry important information about the structure of the objects in the visual scene. Luminance masking is a phenomenon whereby image distortions (in this context) tend to be less visible in bright regions, while contrast masking is a phenomenon whereby distortions become less visible where there is significant activity or "texture" in the image. == History == The predecessor of SSIM was called Universal Quality Index (UQI), or Wang–Bovik index, which was developed by Zhou Wang and Alan Bovik in 2001. This evolved, through their collaboration with Hamid Sheikh and Eero Simoncelli, into the current version of SSIM, which was published in April 2004 in the IEEE Transactions on Image Processing. In addition to defining the SSIM quality index, the paper provides a general context for developing and evaluating perceptual quality measures, including connections to human visual neurobiology and perception, and direct validation of the index against human subject ratings. The basic model was developed in the Laboratory for Image and Video Engineering (LIVE) at The University of Texas at Austin and further developed jointly with the Laboratory for Computational Vision (LCV) at New York University. Further variants of the model have been developed in the Image and Visual Computing Laboratory at University of Waterloo and have been commercially marketed. SSIM subsequently found strong adoption in the image processing community and in the television and social media industries. The 2004 SSIM paper has been cited over 50,000 times according to Google Scholar, making it one of the highest cited papers in the image processing and video engineering fields. It was recognized with the IEEE Signal Processing Society Best Paper Award for 2009. It also received the IEEE Signal Processing Society Sustained Impact Award for 2016, indicative of a paper having an unusually high impact for at least 10 years following its publication. Because of its high adoption by the television industry, the authors of the original SSIM paper were each accorded a Primetime Engineering Emmy Award in 2015 by the Television Academy. == Algorithm == The SSIM index is calculated between two windows of pixel values x {\displaystyle x} and y {\displaystyle y} of common size, from corresponding locations in two images to be compared. These SSIM values can be aggregated across the full images by averaging or other variations. === Special-case formula === In one simple special case, further explained in the next section, the SSIM measure between x {\displaystyle x} and y {\displaystyle y} is: SSIM ( x , y ) = ( 2 μ x μ y + c 1 ) ( 2 σ x y + c 2 ) ( μ x 2 + μ y 2 + c 1 ) ( σ x 2 + σ y 2 + c 2 ) {\displaystyle {\hbox{SSIM}}(x,y)={\frac {(2\mu _{x}\mu _{y}+c_{1})(2\sigma _{xy}+c_{2})}{(\mu _{x}^{2}+\mu _{y}^{2}+c_{1})(\sigma _{x}^{2}+\sigma _{y}^{2}+c_{2})}}} with: μ x {\displaystyle \mu _{x}} the pixel sample mean of x {\displaystyle x} ; μ y {\displaystyle \mu _{y}} the pixel sample mean of y {\displaystyle y} ; σ x 2 {\displaystyle \sigma _{x}^{2}} the sample variance of x {\displaystyle x} ; σ y 2 {\displaystyle \sigma _{y}^{2}} the sample variance of y {\displaystyle y} ; σ x y {\displaystyle \sigma _{xy}} the sample covariance of x {\displaystyle x} and y {\displaystyle y} ; c 1 = ( k 1 L ) 2 {\displaystyle c_{1}=(k_{1}L)^{2}} , c 2 = ( k 2 L ) 2 {\displaystyle c_{2}=(k_{2}L)^{2}} two variables to stabilize the division with weak denominator; L {\displaystyle L} the dynamic range of the pixel-values (typically this is 2 # b i t s p e r p i x e l − 1 {\displaystyle 2^{\#bits\ per\ pixel}-1} ); k 1 = 0.01 {\displaystyle k_{1}=0.01} and k 2 = 0.03 {\displaystyle k_{2}=0.03} by default. === General formula and components === The SSIM formula is based on three comparison measurements between the samples of x {\displaystyle x} and y {\displaystyle y} : luminance ( l {\displaystyle l} ), contrast ( c {\displaystyle c} ), and structure ( s {\displaystyle s} ). The individual comparison functions are: l ( x , y ) = 2 μ x μ y + c 1 μ x 2 + μ y 2 + c 1 {\displaystyle l(x,y)={\frac {2\mu _{x}\mu _{y}+c_{1}}{\mu _{x}^{2}+\mu _{y}^{2}+c_{1}}}} c ( x , y ) = 2 σ x σ y + c 2 σ x 2 + σ y 2 + c 2 {\displaystyle c(x,y)={\frac {2\sigma _{x}\sigma _{y}+c_{2}}{\sigma _{x}^{2}+\sigma _{y}^{2}+c_{2}}}} s ( x , y ) = σ x y + c 3 σ x σ y + c 3 {\displaystyle s(x,y)={\frac {\sigma _{xy}+c_{3}}{\sigma _{x}\sigma _{y}+c_{3}}}} The SSIM for each block is then a weighted combination of those comparative measures: SSIM ( x , y ) = l ( x , y ) α ⋅ c ( x , y ) β ⋅ s ( x , y ) γ {\displaystyle {\text{SSIM}}(x,y)=l(x,y)^{\alpha }\cdot c(x,y)^{\beta }\cdot s(x,y)^{\gamma }} Choosing the third denominator stabilizing constant as: c 3 = c 2 / 2 {\displaystyle c_{3}=c_{2}/2} leads to a simplification when combining the c and s components with equal exponents ( β = γ {\displaystyle \beta =\gamma } ), as the numerator of c is then twice the denominator of s, leading to a cancellation leaving just a 2. Setting the weights (exponents) α , β , γ {\displaystyle \alpha ,\beta ,\gamma } to 1, the formula can then be reduced to the special case shown above. === Mathematical properties === SSIM satisfies the identity of indiscernibles, and symmetry properties, but not the triangle inequality or non-negativity, and thus is not a distance function. However, under certain conditions, SSIM may be converted to a normalized root MSE measure, which is a distance function. The square of such a function is not convex, but is locally convex and quasiconvex, making SSIM a feasible target for optimization. === Application of the formula === In order to evaluate the image quality, this formula is usually applied only on luma, although it may also be applied on color (e.g., RGB) values or chromatic (e.g. YCbCr) values. The resultant SSIM index is a decimal value between -1 and 1, where 1 indicates perfect similarity, 0 indicates no similarity, and -1 indicates perfect anti-correlation. For an image, it is typically calculated using a sliding Gaussian window of size 11×11 or a block window of size 8×8. The window can be displaced pixel-by-pixel on the image to create an SSIM quality map of the image. In the case of video quality assessment, the authors propose to use only a subgroup of the possible windows to reduce the complexity of the calculation. === Variants === ==== Multi-scale SSIM ==== A more advanced form of SSIM, called Multiscale SSIM (MS-SSIM) is conducted over multiple scales through a process of multiple stages of sub-sampling, reminiscent of multiscale processing in the early vision system. It has been shown to perform equally well or better than SSIM on different subjective image and video databases. ==== Multi-component SSIM ==== Three-component SSIM (3-SSIM) is a form of SSIM that takes into account the fact that the human eye can see differences more precisely on textured or edge regions than on smooth regions. The resulting metric is calculated as a weighted average of SSIM for three categories of regions: edges, textures, and smooth regions. The proposed weighting is 0.5 for edges, 0.25 for the textured and smooth regions. The authors mention that a 1/0/0 weighting (ignoring anything but edge distortions) leads to results that are closer to subjective ratings. This suggests that edge regions play a dominant role in image quality perception. The authors of 3-SSIM have also extended the model into four-component SSIM (4-SSIM). The edge types are further subdivided into preserved and changed edges by their distortion status. The proposed weighting is 0.25 for all four components. ==== Structural dissimilarity ==== Structural dissimilarity (DSSIM) may be derived from SSIM, though it does not constitute a distance function as the triangle inequality is not necessarily satisfied. DSSIM ( x , y ) = 1 − SSIM ( x , y ) 2 {\displaystyle {\hbox{DSSIM}}(x,y)={\frac {1-{\hbox{SSIM}}(x,y)}{2}}} ==== Video quality metrics and temporal variants ==== It is worth noting that the original vers
Read more →
Dating app

An online dating application, commonly known as a dating app, is an online dating service presented through a mobile phone application. These apps often take advantage of a smartphone's GPS location capabilities, always on-hand presence, and access to mobile wallets. These apps aim to speed up the online dating process of sifting through potential dating partners, chatting, flirting, and potentially meeting or becoming romantically involved. Online dating apps are now mainstream in the United States. As of 2017, online dating (which included both apps and other online dating services) was the principal method by which new couples in the U.S. met. The percentage of couples meeting online is predicted to increase to 70% by 2040. == Origins == The first computerized dating service was launched in 1964, the St. James Computer Dating Service, which became known as Com-Pat. The first U.S. dating service that used computerized match making was Operation Match. It required men and women to complete a questionnaire and was launched in 1965. Operation Match inspired the methodology of Dateline, which became popular in the 1970s and 1980s. Match.com was launched in 1995 and turned computerized match making into a profitable business. Grindr targeted gay and bisexual men at launch. Tinder, launched in 2012, led to a growth of online dating applications by both new providers and existing online dating services that expanded into the mobile app market. == Usage by demographic group == Online dating applications typically target a younger demographic group, though some apps, like Senior Match and Silver Singles are geared toward the 50 and up demographic. In 2016, almost 50% of people knew of someone who use the services or had met their loved one through the service. After the iPhone launch in 2007, online dating data has mushroomed as application usage increased. In 2005, only 10% of 18-24 year olds reported to have used online dating services; this number quickly grew to over 27%, making this target demographic the largest number of users for most applications. When Pew Research Center conducted a study in 2016, they found that 59% of U.S. adults agreed that online dating is a good way to meet people compared to 44% in 2005. This explosion in usage can be explained by the increased use of smartphones. By the end of 2022, it is expected there will be 413 million active users of online dating services worldwide. A 2023 Pew Research Center survey of 6,034 American adults found that 30% had ever used an online dating site or app, including 53% of those aged 18 to 29, 37% of those aged 30 to 49, and 17% of those aged 50 and over. Lesbian, gay and bisexual respondents reported using dating apps at nearly twice the rate of straight respondents (51% versus 28%), and 36% of divorced, separated or widowed adults had used one, compared with 16% of married adults. The increased use of smartphones by those 65 and older has also driven that population to the use dating apps. The Pew Research Center found that usage increase by 8 points since last surveyed in 2012. A study in 2021 found that more than one-third of seniors have dated in the past 5 years, and roughly one-third of those dating seniors have turned to dating apps. During the COVID-19 pandemic, Morning Consult found that more Americans were using online dating apps than ever before. In one survey in April 2020, the company discovered that 53% of U.S. adults who use online dating apps have been using them more during the pandemic. As of February 2021, that share increased to 71 percent. Research using Hofstede's cultural dimensions theory has indicated that norms about online dating applications tend to differ across cultures. A study published in the Journal of Creative Communications looked into the relationships between dating-app advertisements from over 51 countries and the cultural dimensions of these countries. The results revealed that dating-app advertisements appealed to multiple cultural needs, including the needs for relationships, friendship, entertainment, sex, status, design and identity. The use of these appeals was found to be 'congruent with ... the individualism/collectivism and uncertainty avoidance cultural dimensions.' == Popular applications == Following Tinder's success, other companies released dating applications. Raya was released in 2015 as a membership-based dating app, allowing entrance only through referrals, which was marketed as a dating app for celebrities. In early 2026, Hily surpassed Bumble to become the third most-used dating application in the United States and the fifth highest-grossing overall, driven largely by growing popularity among Generation Z users, while remaining behind Tinder and Hinge, both owned by Match Group. A number of dating apps have been created targeting adherents of particular religions seeking partners of the same religion, such as Muzmatch for Muslims, Christian Mingle, SALT, and Christian Connection for Christians, and JSwipe and JDate for Jews. === VR Dating === VR Dating is an application of Social VR where people can exist, collaborate, and perform various activities together. Virtual reality apps use virtual and augmented realities to make the dating experience more lifelike and more effective, as well as allow people to expand what is already possible in the world of online dating. There are several online platforms of VR Dating. The VR dating app Nevermet is the VR equivalent of Tinder, where people can search and find on dates. However, instead of actual real-life pictures, users will update pictures of virtual selves and will be interacting with avatars rather than real faces. Flirtual is a self-contained social VR app that serves to match users who then decide where and how to meet in VR. Flirtual hosts speed dating and social events in VR. == Effects on dating == The usage of online dating applications can have both advantages and disadvantages: === Advantages === Many of the applications provide personality tests for matching or use algorithms to match users. These factors enhance the possibility of users getting matched with a compatible candidate. Users are in control; they are provided with many options so there are enough matches that fit their particular type. Users can simply choose to not match the candidates that they know they are not interested in. Narrowing down options is easy. Once users think they are interested, they are able to chat and get to know the potential candidate. This form of communication can reduce the time, cost, and uncertainty often associated with traditional dating methods. Online dating offers convenience; people want dating to work around their schedules. Online dating can also increase self-confidence; even if users get rejected, they know there are hundreds of other candidates that will want to match with them so they can simply move on to the next option. In fact, 60% of U.S. adults agree that online dating is a good way to meet people and 66% say they have gone on a real date with someone they met through an application. Today, 5% of married Americans or Americans in serious relationships said they met their significant other online. The 39% of online dating users (representing 12% of all U.S. adults) say they have been in a committed relationship or married someone they met on a dating site or app. ==== Rejection sensitive individuals ==== Individuals high in rejection sensitivity are more likely to use online dating applications. As they tend to expect, perceive and overreact to rejection, rejection sensitive individuals struggle with traditional dating. Online dating applications allow for them to better reveal their true selves, potentially increasing their dating success. Online dating applications also obscure rejection cues, alleviating the rejection-related distress experienced by rejection sensitive individuals. ==== Anxiously attached individuals ==== Individuals high in attachment anxiety are also more likely to use online dating applications. While they harbour negative self-views, anxiously attached individuals are also more eager to enter and commit to relationships. Online dating applications allow for them to present "an authentic yet ideal version of themselves", mitigating their tendencies to view themselves as undesirable. This increases their romantic confidence, and potentially alleviates their anxiety when searching for a romantic partner. === Disadvantages === Sometimes having too many options can be overwhelming. With so many options available, users can get lost in their choices and end up spending too much time looking for the "perfect" candidate instead of using that time to start a real relationship. In addition, the algorithms and matching systems put in place may not always be as accurate as users think. There is no perfect system that can match two people's personalities perfectly every time. Communication online also lacks the physical chemistry aspec
Read more →
Deep Learning Super Sampling

Deep Learning Super Sampling (DLSS) is a suite of real-time deep learning image enhancement and upscaling technologies developed by Nvidia that are available in a number of video games. The goal of these technologies is to allow the majority of the graphics pipeline to run at a lower resolution for increased performance, and then infer a higher resolution image from this that approximates the same level of detail as if the image had been rendered at this higher resolution. This allows for higher graphical settings or frame rates for a given output resolution, depending on user preference. All generations of DLSS are available on all RTX-branded cards from Nvidia in supported titles. However, the Frame Generation feature is only supported on RTX 40 series GPUs or newer and Multi Frame Generation is only available on 50 series GPUs. == History == Nvidia advertised DLSS as a key feature of GeForce RTX 20 series GPUs when they launched in September 2018. At that time, the results were limited to a few video games, namely Battlefield V, or Metro Exodus, because the algorithm had to be trained specifically on each game on which it was applied and the results were usually not as good as simple resolution upscaling. In 2019, Control shipped with ray tracing and an image processing algorithm that approximated DLSS, which did not use the Tensor Cores. In April 2020, Nvidia advertised and shipped an improved version of DLSS named DLSS 2 with driver version 445.75. DLSS 2.0 was available for a few existing games including Control and Wolfenstein: Youngblood, and would later be added to many newly released games and game engines such as Unreal Engine and Unity. This time Nvidia said that it used the Tensor Cores again, and that the AI did not need to be trained specifically on each game. Despite sharing the DLSS branding, the two iterations of DLSS differ significantly and are not backwards-compatible. In January 2025, Nvidia stated that there are over 540 games and apps supporting DLSS, and that over 80% of Nvidia RTX users activate DLSS. In March 2025, there were more than 100 games that support DLSS 4, according to Nvidia. By May 2025, over 125 games supported DLSS 4. The first video game console to use DLSS, the Nintendo Switch 2, was released on June 5, 2025. Nvidia announced DLSS 4.5 at CES 2026. In January 2026, Nvidia stated that over 250 games and applications support Multi Frame Generation. On March 16, 2026, at GTC 2026, Nvidia CEO Jensen Huang presented DLSS 5, a real-time AI model based on neural rendering that realistically enhances lighting and material surfaces at up to 4K resolution while retaining the developer's intended art style. It is planned to release in fall of 2026. In a blog post on its website, Nvidia has announced that DLSS 5 will be available in such games as Assassin's Creed Shadows, Delta Force, Hogwarts Legacy, Naraka: Bladepoint, Phantom Blade Zero, Resident Evil Requiem, Starfield, The Elder Scrolls IV: Oblivion Remastered, and more. On May 31, 2026, Nvidia announced an updated version of Ray Reconstruction for DLSS 4.5 in a blog post, scheduled for release on all RTX GPUs in August of the same year. They said it is designed to better embed spatial awareness into scenes and analyze engine data on movements and lighting conditions, resulting in a sharper, more stable, and less noisy image. === Release timeline === == Technology == === DLSS 1 === The first iteration of DLSS is a predominantly spatial image upscaler with two stages, both relying on convolutional auto-encoder neural networks. The first step is an image enhancement network which uses the current frame and motion vectors to perform edge enhancement, and spatial anti-aliasing. The second stage is an image upscaling step which uses the single raw, low-resolution frame to upscale the image to the desired output resolution. Using just a single frame for upscaling means the neural network itself must generate a large amount of new information to produce the high-resolution output, which can result in slight hallucinations such as leaves that differ in style to the source content. The neural networks are trained on a per-game basis by generating a "perfect frame" using traditional supersampling to 64 samples per pixel, as well as the motion vectors for each frame. The data collected must be as comprehensive as possible, including as many levels, times of day, graphical settings, resolutions, etc. as possible. This data is also augmented using common augmentations such as rotations, colour changes, and random noise to help generalize the test data. Training is performed on Nvidia's Saturn V supercomputer. This first iteration received a mixed response, with many criticizing the often soft appearance and artifacts along with glitches in certain situations; likely a side effect of the limited data from only using a single frame input to the neural networks which could not be trained to perform optimally in all scenarios and edge-cases. Nvidia also demonstrated the ability for the auto-encoder networks to learn the ability to recreate depth-of-field and motion blur, although this functionality has never been included in a publicly released product. === DLSS 2 === DLSS 2 is a temporal anti-aliasing upsampling (TAAU) implementation, using data from previous frames extensively through sub-pixel jittering to resolve fine detail and reduce aliasing. The data DLSS 2 collects includes: the raw low-resolution input, motion vectors, depth buffers, and exposure / brightness information. It can also be used as a simpler TAA implementation where the image is rendered at 100% resolution, rather than being upsampled by DLSS, Nvidia brands this as DLAA (Deep Learning Anti-Aliasing). TAA(U) is used in many modern video games and game engines; however, all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method. DLSS 2 uses a convolutional auto-encoder neural network trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLSS 2 can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. This is why DLSS 2 can sometimes produce a sharper image than rendering at higher, or even native resolutions using traditional TAA. However, no temporal solution is perfect, and artifacts (ghosting in particular) are still visible in some scenarios when using DLSS 2. Because temporal artifacts occur in most art styles and environments in broadly the same way, the neural network that powers DLSS 2 does not need to be retrained when being used in different games. Despite this, Nvidia does frequently ship new minor revisions of DLSS 2 with new titles, so this could suggest some minor training optimizations may be performed as games are released, although Nvidia does not provide changelogs for these minor revisions to confirm this. The main advancements compared to DLSS 1 include: Significantly improved detail retention, a generalized neural network that does not need to be re-trained per-game, and ~2x less overhead (~1–2 ms vs ~2–4 ms). It should also be noted that forms of TAAU such as DLSS 2 are not upscalers in the same sense as techniques such as ESRGAN or DLSS 1, which attempt to create new information from a low-resolution source; instead, TAAU works to recover data from previous frames, rather than creating new data. In practice, this means low resolution textures in games will still appear low-resolution when using current TAAU techniques. This is why Nvidia recommends game developers use higher resolution textures than they would normally for a given rendering resolution by applying a mip-map bias when DLSS 2 is enabled. === DLSS 3 === Augments DLSS 2 with improved image quality and the introduction of a new motion interpolation feature, called Frame Generation. The DLSS Frame Generation algorithm takes two rendered frames from the rendering pipeline and generates a new frame that smoothly transitions between them. For every frame rendered, one additional frame is generated. DLSS 3.0 makes use of a new generation Optical Flow Accelerator (OFA) included in the Ada Lovelace architecture of GeForce RTX 40 series GPUs and with that is exclusive to them. The new OFA is said to be faster and more accurate than the one already available in previous Turing and Ampere RTX GPUs. === DLSS 3.5 === DLSS 3.5 adds Ray Reconstruction, replacing multiple denoising algorithms with a single AI model trained o
Read more →
Normalization (image processing)

In image processing, normalization is a process that changes the range of pixel intensity values, a kind of intensity mapping. Applications include photographs with poor contrast due to glare, for example. A typical case is contrast stretching. In more general fields of data processing, such as digital signal processing, it is referred to as dynamic range expansion. The purpose of dynamic range expansion in the various applications is usually to bring the image, or other type of signal, into a range that is more familiar or normal to the senses, hence the term normalization. Often, the motivation is to achieve consistency in dynamic range for a set of data, signals, or images to avoid mental distraction or fatigue. For example, a newspaper will strive to make all of the images in an issue share a similar range of grayscale. Auto-normalization in image processing software typically normalizes to the full dynamic range of the number system specified in the image file format. == Definition == Normalization transforms an n-dimensional grayscale image I : { X ⊆ R n } → { Min , . . , Max } {\displaystyle I:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{Min}},..,{\text{Max}}\}} with intensity values in the range ( Min , Max ) {\displaystyle ({\text{Min}},{\text{Max}})} , into a new image I N : { X ⊆ R n } → { newMin , . . , newMax } {\displaystyle I_{N}:\{\mathbb {X} \subseteq \mathbb {R} ^{n}\}\rightarrow \{{\text{newMin}},..,{\text{newMax}}\}} with intensity values in the range ( newMin , newMax ) {\displaystyle ({\text{newMin}},{\text{newMax}})} . The linear normalization of a grayscale digital image is performed according to the formula I N = ( I − Min ) newMax − newMin Max − Min + newMin {\displaystyle I_{N}=(I-{\text{Min}}){\frac {{\text{newMax}}-{\text{newMin}}}{{\text{Max}}-{\text{Min}}}}+{\text{newMin}}} For example, if the intensity range of the image is 50 to 180 and the desired range is 0 to 255 the process entails subtracting 50 from each of pixel intensity, making the range 0 to 130. Then each pixel intensity is multiplied by 255/130, making the range 0 to 255. Normalization might also be non-linear, as the relationship between I {\displaystyle I} and I N {\displaystyle I_{N}} may not be linear. An example of non-linear normalization is when the normalization follows a sigmoid function, in which case the normalized image is computed according to the formula I N = ( newMax − newMin ) 1 1 + e − I − β α + newMin {\displaystyle I_{N}=({\text{newMax}}-{\text{newMin}}){\frac {1}{1+e^{-{\frac {I-\beta }{\alpha }}}}}+{\text{newMin}}} Where α {\displaystyle \alpha } defines the width of the input intensity range, and β {\displaystyle \beta } defines the intensity around which the range is centered. Gamma correction (log/inverse log) is also a common transformation function. === Colorspace === Intensity operations generally operate on a colorspace that maps to the human perception of lightness without intentionally changing the other properties. This can be done, for example, by operating on the L component of the CIELAB color space, or approximately by operating on the Y component of YCbCr. It is also possible to operate on each of the RGB color channels, though the result will not always make sense. == Contrast stretching == This is the most significant and essential technique of spatial-based image enhancement. The basic intent of this contrast enhancement technique is to adjust the local contrast in the image so as to bring out the clear regions or objects in the image. Low-contrast images often result from poor or non-uniform lighting conditions, a limited dynamic range of the imaging sensor, or improper settings of the lens aperture. This operation tries to change the intensity of the pixel in the image, particularly in the input image, to obtain an enhanced image. It is based on the number of techniques, namely local, global, dark and bright levels of contrast. The contrast enhancement is considered as the amount of color or gray differentiation that lies among the different features in an image. The contrast enhancement improves the quality of image by increasing the luminance difference between the foreground and background. A contrast stretching transformation can be achieved by: Stretching the dark range of input values into a wider range of output values: This involves increasing the brightness of the darker areas in the image to enhance details and improve visibility. Shifting the mid-range of input values: This involves adjusting the brightness levels of the mid-tones in the image to improve overall contrast and clarity. Compressing the bright range of input values: This process involves reducing the brightness of the brighter areas in the image to prevent overexposure resulting in a more balanced and visually appealing image. It can be described as the following piecewise funciton: I N = { s 1 r 1 I if I < r 1 s 2 − s 1 r 1 − r 2 ( I − r 1 ) if r 1 ≤ I ≤ r 2 1 − s 2 1 − r 2 ( I − r 2 ) if I > r 2 {\displaystyle I_{N}={\begin{cases}{\frac {s_{1}}{r_{1}}}I&{\text{if }}Ir_{2}\end{cases}}} Where: ( r 1 , s 1 ) {\displaystyle (r_{1},s_{1})} defines the transition point between the "dark" range to the "main" range. ( r 2 , s 2 ) {\displaystyle (r_{2},s_{2})} defines the transition point between the "main" range to the "bright" range. A typical linear stretch is obtained when ( r 1 , s 1 ) = ( r min , 0 ) {\displaystyle (r_{1},s_{1})=(r_{\text{min}},0)} and ( r 2 , s 2 ) = ( r max , 1 ) {\displaystyle (r_{2},s_{2})=(r_{\text{max}},1)} , where r min {\displaystyle r_{\text{min}}} and r max {\displaystyle r_{\text{max}}} denote the minimum and maximum levels in the source image. === Global contrast stretching === Global Contrast Stretching considers all color palate ranges at once to determine the maximum and minimum values for the entire RGB color image. This approach utilizes the combination of RGB colors to derive a single maximum and minimum value for contrast stretching across the entire image. === Local contrast stretching === Local contrast stretching (LCS) is an image enhancement method that focuses on locally adjusting each pixel's value to improve the visualization of structures within an image, particularly in both the darkest and lightest portions. It operates by utilizing sliding windows, known as kernels, which traverse the image. The central pixel within each kernel is adjusted using the following formula: I p ( x , y ) = 255 × [ I 0 ( x , y ) − m i n ] ( m a x − m i n ) {\displaystyle I_{p}(x,y)=255\times {\frac {[I_{0}(x,y)-min]}{(max-min)}}} Where: Ip(x,y) is the color level for the output pixel (x,y) after the contrast stretching process. I0(x,y) is the color level input for data pixel (x, y). max is the maximum value for color level in the input image within the selected kernel. min is the minimum value for color level in the input image within the selected kernel. A piecewise form (see above) may also be used. LCS can be applied to the three color channels of an image separately.
Read more →
AdBlock

AdBlock is an ad-blocking browser extension for Google Chrome, Apple Safari (desktop and mobile), Firefox, Samsung Internet, Microsoft Edge and Opera. AdBlock allows users to prevent page elements, such as advertisements, from being displayed. It is free to download and use, and it includes optional donations to the developers. The AdBlock extension was created on December 8, 2009, which is the day that supports for extensions was added to Google Chrome. It was one of the first Google Chrome extensions that was made. Since 2016, AdBlock has been based on the Adblock Plus source code. In July 2018, AdBlock acquired uBlock, a commercial ad-blocker owned by uBlock LLC and based on uBlock Origin. In April 2021, eyeo GmbH (developer of Adblock Plus) announced its purchase of AdBlock, Inc (formerly BetaFish, Inc). == Crowdfunding == Gundlach launched a crowdfunding campaign on Crowdtilt in August 2013 in order to fund an ad campaign to raise awareness of ad-blocking and to rent a billboard at Times Square. After the one-month campaign, it raised $55,000. == Sales and acceptable ads == AdBlock was sold to an anonymous buyer in 2015 and on October 15, 2015, Gundlach's name was taken down from the site. In the terms of the deal, the original developer Michael Gundlach left operations to Adblock's continuing director, Gabriel Cubbage, and as of October 2, 2015, AdBlock began participating in the Acceptable Ads program. Acceptable Ads identifies "non-annoying" ads, which AdBlock shows by default. The intent is to allow non-invasive advertising, to either maintain support for websites that rely on advertising as a main source of revenue or for websites that have an agreement with the program. == Filters == AdBlock uses EasyList, the same filter syntax as Adblock Plus for Firefox, and natively supports the use of a number of filter lists. == Partnership with Amnesty International == On March 12, 2016, in support of World Day Against Cyber Censorship, and in partnership with Amnesty International, instead of blocking ads, AdBlock replaced ads with banners linked to articles on Amnesty's website, written by prominent free speech advocates such as Edward Snowden, to raise awareness of government-imposed online censorship and digital privacy issues around the world. The campaign was met with both praise and criticism, with AdBlock's CEO, Gabriel Cubbage, defending the decision in an essay on AdBlock's website, saying "We’re showing you Amnesty banners, just for today, because we believe users should be part of the conversation about online privacy. Tomorrow, those spaces will be vacant again. But take a moment to consider that in an increasingly information-driven world, when your right to digital privacy is threatened, so is your right to free expression." Meanwhile, Simon Sharwood of The Register characterized Cubbage's position as "'You should control your computer except when we feel political', says AdBlock CEO". == AdBlock for Firefox == On September 13, 2014, the AdBlock team released a version for Firefox users, ported from the code for Google Chrome, released under the same free software license as the original Adblock. The extension was removed on April 2, 2015, by an administrator on Mozilla Add-ons. On December 7, 2015, the official AdBlock site's knowledge base article stated that with version 44 or higher of Firefox desktop and Firefox Mobile, AdBlock will not be supported. The last version of Adblock for those platforms will work on older versions of Firefox. AdBlock was released again on Mozilla Add-ons on November 17, 2016. On April 1, 2012, Adblock developer Michael Gundlach tweaked the code to display LOLcats instead of simply blocking ads. Initially developed as a short-lived April Fools joke, the response was so positive that CatBlock was continued to be offered as an optional add-on supported by a monthly subscription. On October 23, 2014, the developer decided to end official support for CatBlock, and made it open-source, under GPLv3 licensing, as the original extension.
Read more →