Winner-take-all is a computational principle applied in computational models of neural networks by which neurons compete with each other for activation. In the classical form, only the neuron with the highest activation stays active while all other neurons shut down; however, other variations allow more than one neuron to be active, for example the soft winner take-all, by which a power function is applied to the neurons. == Neural networks == In the theory of artificial neural networks, winner-take-all networks are a case of competitive learning in recurrent neural networks. Output nodes in the network mutually inhibit each other, while simultaneously activating themselves through reflexive connections. After some time, only one node in the output layer will be active, namely the one corresponding to the strongest input. Thus the network uses nonlinear inhibition to pick out the largest of a set of inputs. Winner-take-all is a general computational primitive that can be implemented using different types of neural network models, including both continuous-time and spiking networks. Winner-take-all networks are commonly used in computational models of the brain, particularly for distributed decision-making or action selection in the cortex. Important examples include hierarchical models of vision, and models of selective attention and recognition. They are also common in artificial neural networks and neuromorphic analog VLSI circuits. It has been formally proven that the winner-take-all operation is computationally powerful compared to other nonlinear operations, such as thresholding. In many practical cases, there is not only one single neuron which becomes active but there are exactly k neurons which become active for a fixed number k. This principle is referred to as k-winners-take-all. === Example algorithm === Consider a single linear neuron, with inputs x 1 , … , x n {\displaystyle x_{1},\dots ,x_{n}} . Each input has weight w i {\displaystyle w_{i}} , and the output of the neuron is ∑ i w i x i {\displaystyle \sum _{i}w_{i}x_{i}} . In the Instar learning rule, on each input vector, the weight vectors are modified according to Δ w i = η ( x i − w i ) {\displaystyle \Delta w_{i}=\eta (x_{i}-w_{i})} where η {\displaystyle \eta } is the learning rate. This rule is unsupervised, since we need just the input vector, not a reference output. Now, consider multiple linear neurons y 1 , … , y m {\displaystyle y_{1},\dots ,y_{m}} . The output of each satisfies y i = ∑ j w i j x j {\displaystyle y_{i}=\sum _{j}w_{ij}x_{j}} . In the winner-take-all algorithm, the weights are modified as follows. Given an input vector x {\displaystyle x} , each output is computed. The neuron with the largest output is selected, and the weights going into that neuron are modified according to the Instar learning rule. All other weights remain unchanged. The k-winners-take-all rule is similar, except that the Instar learning rule is applied to the weights going into the k neurons with the largest outputs. == Circuit example == A simple, but popular CMOS winner-take-all circuit is shown on the right. This circuit was originally proposed by Lazzaro et al. (1989) using MOS transistors biased to operate in the weak-inversion or subthreshold regime. In the particular case shown there are only two inputs (IIN,1 and IIN,2), but the circuit can be easily extended to multiple inputs in a straightforward way. It operates on continuous-time input signals (currents) in parallel, using only two transistors per input. In addition, the bias current IBIAS is set by a single global transistor that is common to all the inputs. The largest of the input currents sets the common potential VC. As a result, the corresponding output carries almost all the bias current, while the other outputs have currents that are close to zero. Thus, the circuit selects the larger of the two input currents, i.e., if IIN,1 > IIN,2, we get IOUT,1 = IBIAS and IOUT,2 = 0. Similarly, if IIN,2 > IIN,1, we get IOUT,1 = 0 and IOUT,2 = IBIAS. A SPICE-based DC simulation of the CMOS winner-take-all circuit in the two-input case is shown on the right. As shown in the top subplot, the input IIN,1 was fixed at 6nA, while IIN,2 was linearly increased from 0 to 10nA. The bottom subplot shows the two output currents. As expected, the output corresponding to the larger of the two inputs carries the entire bias current (10nA in this case), forcing the other output current nearly to zero. == Other uses == In stereo matching algorithms, following the taxonomy proposed by Scharstein and Szelliski, winner-take-all is a local method for disparity computation. Adopting a winner-take-all strategy, the disparity associated with the minimum or maximum cost value is selected at each pixel. It is axiomatic that in the electronic commerce market, early dominant players such as AOL or Yahoo! get most of the rewards. By 1998, one study found the top 5% of all web sites garnered more than 74% of all traffic. The winner-take-all hypothesis in economics suggests that once a technology or a firm gets ahead, it will do better and better over time, whereas lagging technology and firms will fall further behind. See First-mover advantage.
Multi-agent reinforcement learning
Multi-agent reinforcement learning (MARL) is a sub-field of reinforcement learning. It focuses on studying the behavior of multiple learning agents that coexist in a shared environment. Each agent is motivated by its own rewards, and does actions to advance its own interests; in some environments these interests are opposed to the interests of other agents, resulting in complex group dynamics. Multi-agent reinforcement learning is closely related to game theory and especially repeated games, as well as multi-agent systems. Its study combines the pursuit of finding ideal algorithms that maximize rewards with a more sociological set of concepts. While research in single-agent reinforcement learning is concerned with finding the algorithm that gets the biggest number of points for one agent, research in multi-agent reinforcement learning evaluates and quantifies social metrics, such as cooperation, reciprocity, equity, social influence, language and discrimination. == Definition == Similarly to single-agent reinforcement learning, multi-agent reinforcement learning is modeled as some form of a Markov decision process (MDP). Fix a set of agents I = { 1 , . . . , N } {\displaystyle I=\{1,...,N\}} . We then define: A set S {\displaystyle S} of environment states. One set A i {\displaystyle {\mathcal {A}}_{i}} of actions for each of the agents i ∈ I = { 1 , … , N } {\displaystyle i\in I=\{1,\dots ,N\}} . P a → ( s , s ′ ) = Pr ( s t + 1 = s ′ ∣ s t = s , a → t = a → ) {\displaystyle P_{\vec {a}}(s,s')=\Pr(s_{t+1}=s'\mid s_{t}=s,{\vec {a}}_{t}={\vec {a}})} is the probability of transition (at time t {\displaystyle t} ) from state s {\displaystyle s} to state s ′ {\displaystyle s'} under joint action a → {\displaystyle {\vec {a}}} . R → a → ( s , s ′ ) {\displaystyle {\vec {R}}_{\vec {a}}(s,s')} is the immediate joint reward after the transition from s {\displaystyle s} to s ′ {\displaystyle s'} with joint action a → {\displaystyle {\vec {a}}} . In settings with perfect information, such as the games of chess and Go, the MDP would be fully observable. In settings with imperfect information, especially in real-world applications like self-driving cars, each agent would access an observation that only has part of the information about the current state. In the partially observable setting, the core model is the partially observable stochastic game in the general case, and the decentralized POMDP in the cooperative case. == Cooperation vs. competition == When multiple agents are acting in a shared environment their interests might be aligned or misaligned. MARL allows exploring all the different alignments and how they affect the agents' behavior: In pure competition settings, the agents' rewards are exactly opposite to each other, and therefore they are playing against each other. Pure cooperation settings are the other extreme, in which agents get the exact same rewards, and therefore they are playing with each other. Mixed-sum settings cover all the games that combine elements of both cooperation and competition. === Pure competition settings === When two agents are playing a zero-sum game, they are in pure competition with each other. Many traditional games such as chess and Go fall under this category, as do two-player variants of video games like StarCraft. Because each agent can only win at the expense of the other agent, many complexities are stripped away. There is no prospect of communication or social dilemmas, as neither agent is incentivized to take actions that benefit its opponent. The Deep Blue and AlphaGo projects demonstrate how to optimize the performance of agents in pure competition settings. One complexity that is not stripped away in pure competition settings is autocurricula. As the agents' policy is improved using self-play, multiple layers of learning may occur. === Pure cooperation settings === MARL is used to explore how separate agents with identical interests can communicate and work together. Pure cooperation settings are explored in recreational cooperative games such as Overcooked, as well as real-world scenarios in robotics. In pure cooperation settings all the agents get identical rewards, which means that social dilemmas do not occur. In pure cooperation settings, oftentimes there are an arbitrary number of coordination strategies, and agents converge to specific "conventions" when coordinating with each other. The notion of conventions has been studied in language and also alluded to in more general multi-agent collaborative tasks. === Mixed-sum settings === Most real-world scenarios involving multiple agents have elements of both cooperation and competition. For example, when multiple self-driving cars are planning their respective paths, each of them has interests that are diverging but not exclusive: Each car is minimizing the amount of time it's taking to reach its destination, but all cars have the shared interest of avoiding a traffic collision. Zero-sum settings with three or more agents often exhibit similar properties to mixed-sum settings, since each pair of agents might have a non-zero utility sum between them. Mixed-sum settings can be explored using classic matrix games such as prisoner's dilemma, more complex sequential social dilemmas, and recreational games such as Among Us, Diplomacy and StarCraft II. Mixed-sum settings can give rise to communication and social dilemmas. == Social dilemmas == As in game theory, much of the research in MARL revolves around social dilemmas, such as prisoner's dilemma, chicken and stag hunt. While game theory research might focus on Nash equilibria and what an ideal policy for an agent would be, MARL research focuses on how the agents would learn these ideal policies using a trial-and-error process. The reinforcement learning algorithms that are used to train the agents are maximizing the agent's own reward; the conflict between the needs of the agents and the needs of the group is a subject of active research. Various techniques have been explored in order to induce cooperation in agents: Modifying the environment rules, adding intrinsic rewards, and more. === Sequential social dilemmas === Social dilemmas like prisoner's dilemma, chicken and stag hunt are "matrix games". Each agent takes only one action from a choice of two possible actions, and a simple 2x2 matrix is used to describe the reward that each agent will get, given the actions that each agent took. In humans and other living creatures, social dilemmas tend to be more complex. Agents take multiple actions over time, and the distinction between cooperating and defecting is not as clear cut as in matrix games. The concept of a sequential social dilemma (SSD) was introduced in 2017 as an attempt to model that complexity. There is ongoing research into defining different kinds of SSDs and showing cooperative behavior in the agents that act in them. == Autocurricula == An autocurriculum (plural: autocurricula) is a reinforcement learning concept that's salient in multi-agent experiments. As agents improve their performance, they change their environment; this change in the environment affects themselves and the other agents. The feedback loop results in several distinct phases of learning, each depending on the previous one. The stacked layers of learning are called an autocurriculum. Autocurricula are especially apparent in adversarial settings, where each group of agents is racing to counter the current strategy of the opposing group. The Hide and Seek game is an accessible example of an autocurriculum occurring in an adversarial setting. In this experiment, a team of seekers is competing against a team of hiders. Whenever one of the teams learns a new strategy, the opposing team adapts its strategy to give the best possible counter. When the hiders learn to use boxes to build a shelter, the seekers respond by learning to use a ramp to break into that shelter. The hiders respond by locking the ramps, making them unavailable for the seekers to use. The seekers then respond by "box surfing", exploiting a glitch in the game to penetrate the shelter. Each "level" of learning is an emergent phenomenon, with the previous level as its premise. This results in a stack of behaviors, each dependent on its predecessor. Autocurricula in reinforcement learning experiments are compared to the stages of the evolution of life on Earth and the development of human culture. A major stage in evolution happened 2-3 billion years ago, when photosynthesizing life forms started to produce massive amounts of oxygen, changing the balance of gases in the atmosphere. In the next stages of evolution, oxygen-breathing life forms evolved, eventually leading up to land mammals and human beings. These later stages could only happen after the photosynthesis stage made oxygen widely available. Similarly, human culture could not have gone through the Industrial Revolution in the 18th century without the resources and insights gaine
Transaction data
Transaction data or transaction information is a category of data describing transactions. Transaction data/information gather variables generally referring to reference data or master data – e.g. dates, times, time zones, currencies. Typical transactions are: Financial transactions about orders, invoices, payments; Work transactions about plans, activity records; Logistic transactions about deliveries, storage records, travel records, etc.. == Management == Recording and storing transactions is called records management. The record of the transaction is stored in a place where the retention can be guaranteed and where data is archived or removed following a retention period. Formats of recorded transactions can be digital data in databases and spreadsheets, or handwritten texts in physical documents like former bankbooks. Transaction processing systems are application software that generate transactions and manage transaction data/information, e.g. SAP and Oracle Financials. == Data warehousing == Transaction data can be summarised in a data warehouse, which helps accessibility and analysis of the data.
Algorithms and Combinatorics
Algorithms and Combinatorics (ISSN 0937-5511) is a book series in mathematics, and particularly in combinatorics and the design and analysis of algorithms. It is published by Springer Science+Business Media, and was founded in 1987. == Books == The books published in this series include: The Simplex Method: A Probabilistic Analysis (Karl Heinz Borgwardt, 1987, vol. 1) Geometric Algorithms and Combinatorial Optimization (Martin Grötschel, László Lovász, and Alexander Schrijver, 1988, vol. 2; 2nd ed., 1993) Systems Analysis by Graphs and Matroids (Kazuo Murota, 1987, vol. 3) Greedoids (Bernhard Korte, László Lovász, and Rainer Schrader, 1991, vol. 4) Mathematics of Ramsey Theory (Jaroslav Nešetřil and Vojtěch Rödl, eds., 1990, vol. 5) Matroid Theory and its Applications in Electric Network Theory and in Statics (Andras Recszki, 1989, vol. 6) Irregularities of Partitions: Papers from the meeting held in Fertőd, July 7–11, 1986 (Gábor Halász and Vera T. Sós, eds., 1989, vol. 8) Paths, Flows, and VLSI-Layout: Papers from the meeting held at the University of Bonn, Bonn, June 20–July 1, 1988 (Bernhard Korte, László Lovász, Hans Jürgen Prömel, and Alexander Schrijver, eds., 1990, vol. 9) New Trends in Discrete and Computational Geometry (János Pach, ed., 1993, vol. 10) Discrete Images, Objects, and Functions in Z n {\displaystyle \mathbb {Z} ^{n}} (Klaus Voss, 1993, vol. 11) Linear Optimization and Extensions (Manfred Padberg, 1999, vol. 12) The Mathematics of Paul Erdős I (Ronald Graham and Jaroslav Nešetřil, eds., 1997, vol. 13) The Mathematics of Paul Erdős II (Ronald Graham and Jaroslav Nešetřil, eds., 1997, vol. 14) Geometry of Cuts and Metrics (Michel Deza and Monique Laurent, 1997, vol. 15) Probabilistic Methods for Algorithmic Discrete Mathematics (M. Habib, C. McDiarmid, J. Ramirez-Alfonsin, and B. Reed, 1998, vol. 16) Modern Cryptography, Probabilistic Proofs and Pseudorandomness (Oded Goldreich, 1999, vol. 17) Geometric Discrepancy: An Illustrated Guide (Jiří Matoušek, 1999, vol. 18) Applied Finite Group Actions (Adalbert Kerber, 1999, vol. 19) Matrices and Matroids for Systems Analysis (Kazuo Murota, 2000, vol. 20; corrected ed., 2010) Combinatorial Optimization (Bernhard Korte and Jens Vygen, 2000, vol. 21; 5th ed., 2012) The Strange Logic of Random Graphs (Joel Spencer, 2001, vol. 22) Graph Colouring and the Probabilistic Method (Michael Molloy and Bruce Reed, 2002, Vol. 23) Combinatorial Optimization: Polyhedra and Efficiency (Alexander Schrijver, 2003, vol. 24. In three volumes: A. Paths, flows, matchings; B. Matroids, trees, stable sets; C. Disjoint paths, hypergraphs) Discrete and Computational Geometry: The Goodman-Pollack Festschrift (B. Aronov, S. Basu, J. Pach, and M. Sharir, eds., 2003, vol. 25) Topics in Discrete Mathematics: Dedicated to Jarik Nešetril on the Occasion of his 60th birthday (M. Klazar, J. Kratochvíl, M. Loebl, J. Matoušek, R. Thomas, and P. Valtr, eds., 2006, vol. 26) Boolean Function Complexity: Advances and Frontiers (Stasys Jukna, 2012, Vol. 27) Sparsity: Graphs, Structures, and Algorithms (Jaroslav Nešetřil and Patrice Ossona de Mendez, 2012, vol. 28) Optimal Interconnection Trees in the Plane (Marcus Brazil and Martin Zachariasen, 2015, vol. 29) Combinatorics and Complexity of Partition Functions (Alexander Barvinok, 2016, vol. 30)
Data janitor
A data janitor is a person who works to take big data and condense it into useful amounts of information. Also known as a "data wrangler", a data janitor sifts through data for companies in the information technology industry. A multitude of start-ups rely on large amounts of data, so a data janitor works to help these businesses with this basic, but difficult process of interpreting data. While it is a commonly held belief that data janitor work is fully automated, many data scientists are employed primarily as data janitors. The information technology industry has been increasingly turning towards new sources of data gathered on consumers, so data janitors have become more commonplace in recent years.
Gold (linker)
In software engineering, gold is a linker for ELF files. It became an official GNU package and was added to binutils in March 2008 and first released in binutils version 2.19. gold was developed by Ian Lance Taylor and a small team at Google. The motivation for writing gold was to make a linker that is faster than the GNU linker, especially for large applications coded in C++. Unlike the GNU linker, gold does not use the BFD library to process object files. While this limits the object file formats it can process to ELF only, it is also claimed to result in a cleaner and faster implementation without an additional abstraction layer. The author cited complete removal of BFD as a reason to create a new linker from scratch rather than incrementally improve the GNU linker. This rewrite also fixes some bugs in old ld that break ELF files in various minor ways. To specify gold in a makefile, one sets the LD or LD environment variable to ld.gold. To specify gold through a compiler option, one can use the gcc option -fuse-ld=gold. Fedora has moved gold from binutils into its own package due to concerns it is suffering from bitrot after Google's interest has moved to LLVM. In particular, gold does not read LDFLAGS variable, so cannot see libraries in folders like /usr/local/lib. On 2025-02-02 the 2.44 version of GNU Binutils removed gold from the default source distribution and into a separate package, stating that "the gold linker is now deprecated and will eventually be removed unless volunteers step forward and offer to continue development and maintenance".
Ecoinformatics
Ecoinformatics, or ecological informatics, is the science of information in ecology and environmental science. It integrates environmental and information sciences to define entities and natural processes with language common to both humans and computers. However, this is a rapidly developing area in ecology and there are alternative perspectives on what constitutes ecoinformatics. A few definitions have been circulating, mostly centered on the creation of tools to access and analyze natural system data. However, the scope and aims of ecoinformatics are certainly broader than the development of metadata standards to be used in documenting datasets. Ecoinformatics aims to facilitate environmental research and management by developing ways to access, integrate databases of environmental information, and develop new algorithms enabling different environmental datasets to be combined to test ecological hypotheses. Ecoinformatics is related to the concept of ecosystem services. Ecoinformatics characterize the semantics of natural system knowledge. For this reason, much of today's ecoinformatics research relates to the branch of computer science known as knowledge representation, and active ecoinformatics projects are developing links to activities such as the Semantic Web. Current initiatives to effectively manage, share, and reuse ecological data are indicative of the increasing importance of fields like ecoinformatics to develop the foundations for effectively managing ecological information. Examples of these initiatives are National Science Foundation Datanet projects, DataONE, Data Conservancy, and Artificial Intelligence for Environment & Sustainability. == Software Development Lifecycle == Central to the concept of ecoinformatics is the Software Development Lifecycle (SDLC), a systematic framework for writing, implementing, and maintaining software products. Typically in Ecoinformatics projects, the development pipeline includes data collection, usually from several different environmental data sources, then integrating these data sources together, and then analyzing the data. Here, each step of the SDLC is described in the context of ecoinformatics, per Michener et al. It is important to note that the plan, collect, assure, describes and preserve steps refer to the data collection entity, which can be individual researchers or large data-collection networks, while the discover, integrate, and analyze steps typically refer to the individual researcher. Plan: Ecoinformatics projects require data from several databases. Each database holds different data, and therefore researchers should identify what types of environmental or ecological data they will need to answer their research question. Collect: Data is collected in several different ways. In ecoinformatics, this is usually restricted to manually entering data into a spreadsheet, and parsing data from an existing database. The growth of relational databases has made it easier for ecologists to download relevant data and integrate datasets together Assure: Data entries should be checked thoroughly to validate their accuracy and usability, such as to check for outliers and erroneous points. The same principle applies to data downloaded from datasets. This responsibility falls on both the ecologist downloading the data, and the entity that sets up the data collection system. Describe: An accurate description of the metadata of a dataset that is used in a study should include enough information to deduce the data collection and processing methodology, when the data were collected, why the data were collected, and how the data were stored. This is important for reproducibility, especially for projects that build on each other and may recycle data Preserve: After data is collected by an institutional entity, it should be archived such that it is easily accessible. Ideally, this is in databases that are maintained and not at risk of deprecation Discover: While there are good practices for discovering data to start a research project, this process is often marred by a lack of usable, published data, as researchers may collect data specific to their study, but may not publish this data for wider use. On the data collection end, this can be addressed by better data-sharing practices, such as by linking datasets when publishing papers or studies. On the data procurement end, this can be addressed by more precise data searching, such as using key words to find relevant datasets. Integrate: Synthesizing datasets together can be difficult and labor-intensive, largely due to the methodological differences in data collection. There are several approaches to this, but the best practices typically involve computational approaches, namely using R or Python, to automate the processes and prevent errors Analyze: Data analysis can take several forms, and should be tailored to the specific ecological project. However, all data analysis methods should be well-documented, including the procedure for analysis, justification for analysis methods, and any shortcomings in a specific approach. == Applications of Ecoinformatics Across Ecology == === Ecosystem Ecology === Source: Ecosystem studies, by definition, encompass interactions across the entire life sciences spectrum, from microscopic biochemical reactions to large-scale geological phenomena. As a result, big databases may not be designed specifically for any particular research question, but should be inclusive enough to support most studies. Since ecosystem-level questions require a broad perspective, data-related ecosystem projects would likely incorporate data from several databases. A common framework for incorporating data into ecosystem-level studies is the network science model, in which data collection mechanisms and resources are treated like a large, interconnected network instead of individual entities. The network may include several data collection stations within one databases, or may span across multiple databases. Currently there are several large-scale networks, but they do not generate data on the scale to consider ecology as a big data science. A current challenge for ecoinformatics in ecosystem ecology is that most funding is prioritized for generating new data rather than maintaining existing data infrastructures. Integrating data across the different spatial scales can also be difficult, since each dataset may hold different types of data. === Urban Ecology === Source: The current push for smart cities, and sensor network integration into infrastructure, has positioned as a major source of data for ecological studies. Typical urban ecology questions address the effects of urbanization on the local ecosystem, and how to drive future development to promote urban biodiversity. While sensor networks in cities typically collect environmental data to optimize city processes, they may also be used for ecological initiatives, especially with respect to understanding the complex, multi-layered relationship between cities and their local ecosystem. It can also be used to better understand the current landscape of cities, and identify avenues for rewinding of cities. For example, analyzing mobility patterns can identify areas that may lend themselves well to building parks and green spaces. Bird watching data can also be used to identify the types of bird species in a local area. === Infectious Disease === Source: Like other disciplines of ecology, emerging infectious disease and epidemiology span multiple scales, from understanding the genetics that drive disease trends to large-scale spatiotemporal analyses. As a result, infectious disease studies can incorporate everything from bioinformatics, genetic sequences, amino acid sequences, and environmental observation data. On the micro-scale, these data can then be used to predict infectivity/transmissibility, drug resistance, drug candidates, and mutation sites. On the macro-scale, it can be used to identify societal trends or environmental factors that lend themselves to spillover, locations of infection, and practices that cause disease transmission. == Databases == Source: USGS National Streamflow sensor network GBIF Neotoma Paleobiology database European Vegetation Archive USDA Forest Inventory Analysis TRY BIEN AmeriFlux TEAM iNaturalist NEON GLEON LTER CZO TERN SAEON