Token-based replay technique is a conformance checking algorithm that checks how well a process conforms with its model by replaying each trace on the model (in Petri net notation ). Using the four counters produced tokens, consumed tokens, missing tokens, and remaining tokens, it records the situations where a transition is forced to fire and the remaining tokens after the replay ends. Based on the count at each counter, we can compute the fitness value between the trace and the model. == The algorithm == Source: The token-replay technique uses four counters to keep track of a trace during the replaying: p: Produced tokens c: Consumed tokens m: Missing tokens (consumed while not there) r: Remaining tokens (produced but not consumed) Invariants: At any time: p + m ≥ c ≥ m {\displaystyle p+m\geq c\geq m} At the end: r = p + m − c {\displaystyle r=p+m-c} At the beginning, a token is produced for the source place (p = 1) and at the end, a token is consumed from the sink place (c' = c + 1). When the replay ends, the fitness value can be computed as follows: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})} == Example == Suppose there is a process model in Petri net notation as follows: === Example 1: Replay the trace (a, b, c, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity c {\displaystyle \mathbf {c} } consumes 1 token and produces 1 token ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} and c = 2 + 1 = 3 {\displaystyle c=2+1=3} ). Step 5: The activity d {\displaystyle \mathbf {d} } consumes 2 tokens and produces 1 token ( p = 5 + 1 = 6 {\displaystyle p=5+1=6} , c = 3 + 2 = 5 {\displaystyle c=3+2=5} ). Step 6: The token at the end place is consumed ( c = 5 + 1 = 6 {\displaystyle c=5+1=6} ). The trace is complete. The fitness of the trace ( a , b , c , d {\displaystyle \mathbf {a,b,c,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 0 6 ) + 1 2 ( 1 − 0 6 ) = 1 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {0}{6}})+{\frac {1}{2}}(1-{\frac {0}{6}})=1} === Example 2: Replay the trace (a, b, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity d {\displaystyle \mathbf {d} } needs to be fired but there are not enough tokens. One artificial token was produced and the missing token counter is increased by one ( m = 1 {\displaystyle m=1} ). The artificial token and the token at place [ b , d ] {\displaystyle [\mathbf {b,d} ]} are consumed ( c = 2 + 2 = 4 {\displaystyle c=2+2=4} ) and one token is produced at place end ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} ). Step 5: The token in the end place is consumed ( c = 4 + 1 = 5 {\displaystyle c=4+1=5} ). The trace is complete. There is one remaining token at place [ a , c ] {\displaystyle [\mathbf {a,c} ]} ( r = 1 {\displaystyle r=1} ). The fitness of the trace ( a , b , d {\displaystyle \mathbf {a,b,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 1 5 ) + 1 2 ( 1 − 1 5 ) = 0.8 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {1}{5}})+{\frac {1}{2}}(1-{\frac {1}{5}})=0.8}
Kuwahara filter
The Kuwahara filter is a non-linear smoothing filter used in image processing for adaptive noise reduction. Most filters that are used for image smoothing are linear low-pass filters that effectively reduce noise but also blur out the edges. However the Kuwahara filter is able to apply smoothing on the image while preserving the edges. It is named after Michiyoshi Kuwahara, Ph.D., who worked at Kyoto and Osaka Sangyo Universities in Japan, developing early medical imaging of dynamic heart muscle in the 1970s and 80s. == The Kuwahara operator == Suppose that I ( x , y ) {\displaystyle I(x,y)} is a grey scale image and that we take a square window of size 2 a + 1 {\displaystyle 2a+1} centered around a point ( x , y ) {\displaystyle (x,y)} in the image. This square can be divided into four smaller square regions Q i = 1 ⋯ 4 {\displaystyle Q_{i=1\cdots 4}} each of which will be Q i ( x , y ) = { [ x , x + a ] × [ y , y + a ] if i = 1 [ x − a , x ] × [ y , y + a ] if i = 2 [ x − a , x ] × [ y − a , y ] if i = 3 [ x , x + a ] × [ y − a , y ] if i = 4 {\displaystyle Q_{i}(x,y)={\begin{cases}\left[x,x+a\right]\times \left[y,y+a\right]&{\mbox{ if }}i=1\\\left[x-a,x\right]\times \left[y,y+a\right]&{\mbox{ if }}i=2\\\left[x-a,x\right]\times \left[y-a,y\right]&{\mbox{ if }}i=3\\\left[x,x+a\right]\times \left[y-a,y\right]&{\mbox{ if }}i=4\\\end{cases}}} where × {\displaystyle \times } is the cartesian product. Pixels located on the borders between two regions belong to both regions so there is a slight overlap between subregions. The arithmetic mean m i ( x , y ) {\displaystyle m_{i}(x,y)} and standard deviation σ i ( x , y ) {\displaystyle \sigma _{i}(x,y)} of the four regions centered around a pixel (x,y) are calculated and used to determine the value of the central pixel. The output of the Kuwahara filter Φ ( x , y ) {\displaystyle \Phi (x,y)} for any point ( x , y ) {\displaystyle (x,y)} is then given by Φ ( x , y ) = m i ( x , y ) {\textstyle \Phi (x,y)=m_{i}(x,y)} where i = a r g min j σ j ( x , y ) {\displaystyle i=\operatorname {arg\min } _{j}\sigma _{j}(x,y)} . This means that the central pixel will take the mean value of the area that is most homogenous. The location of the pixel in relation to an edge plays a great role in determining which region will have the greater standard deviation. If for example the pixel is located on a dark side of an edge it will most probably take the mean value of the dark region. On the other hand, should the pixel be on the lighter side of an edge it will most probably take a light value. On the event that the pixel is located on the edge it will take the value of the more smooth, least textured region. The fact that the filter takes into account the homogeneity of the regions ensures that it will preserve the edges while using the mean creates the blurring effect. Similarly to the median filter, the Kuwahara filter uses a sliding window approach to access every pixel in the image. The size of the window is chosen in advance and may vary depending on the desired level of blur in the final image. Bigger windows typically result in the creation of more abstract images whereas small windows produce images that retain their detail. Typically windows are chosen to be square with sides that have an odd number of pixels for symmetry. However, there are variations of the Kuwahara filter that use rectangular windows. Additionally, the subregions do not need to overlap or have the same size as long as they cover all of the window. == Color images == For color images, the filter should not be performed by applying the filter to each RGB channel separately, and then recombining the three filtered color channels to form the filtered RGB image. The main problem with that is that the quadrants will have different standard deviations for each of the channels. For example, the upper left quadrant may have the lowest standard deviation in the red channel, but the lower right quadrant may have the lowest standard deviation in the green channel. This situation would result in the color of the central pixel to be determined by different regions, which might result in color artifacts or blurrier edges. To overcome this problem, for color images a slightly modified Kuwahara filter must be used. The image is first converted into another color space, the HSV color space. The modified filter then operates on only the "brightness" channel, the Value coordinate in the HSV model. The variance of the "brightness" of each quadrant is calculated to determine the quadrant from which the final filtered color should be taken from. The filter will produce an output for each channel which will correspond to the mean of that channel from the quadrant that had the lowest standard deviation in "brightness". This ensures that only one region will determine the RGB values of the central pixel. ImageMagick uses a similar approach, but using the Rec. 709 Luma as the brightness metric. === Julia Implementation === == Applications == Originally the Kuwahara filter was proposed for use in processing RI-angiocardiographic images of the cardiovascular system. The fact that any edges are preserved when smoothing makes it especially useful for feature extraction and segmentation and explains why it is used in medical imaging. The Kuwahara filter however also finds many applications in artistic imaging and fine-art photography due to its ability to remove textures and sharpen the edges of photographs. The level of abstraction helps create a desirable painting-like effect in artistic photographs especially in the case of the colored image version of the filter. These applications have known great success and have encouraged similar research in the field of image processing for the arts. Although the vast majority of applications have been in the field of image processing there have been cases that use modifications of the Kuwahara filter for machine learning tasks such as clustering. The Kuwahara filter has been implemented in CVIPtools. The Kuwahara filter is present as a shader node in Blender. == Drawbacks and restrictions == The Kuwahara filter despite its capabilities in edge preservation has certain drawbacks. At a first glance it is noticeable that the Kuwahara filter does not take into account the case where two regions have equal standard deviations. This is not often the case in real images since it is rather hard to find two regions with exactly the same standard deviation due to the noise that is always present. In cases where two regions have similar standard deviations the value of the center pixel could be decided at random by the noise in these regions. Again this would not be a problem if the regions had the same mean. However, it is not unusual for regions of very different means to have the same standard deviation. This makes the Kuwahara filter susceptible to noise. Different ways have been proposed for dealing with this issue, one of which is to set the value of the center pixel to ( m 1 + m 2 ) / 2 {\textstyle (m_{1}+m_{2})/2} in cases where the standard deviation of two regions do not differ more than a certain value D {\displaystyle D} . The Kuwahara filter is also known to create block artifacts in the images especially in regions of the image that are highly textured. These blocks disrupt the smoothness of the image and are considered to have a negative effect in the aesthetics of the image. This phenomenon occurs due to the division of the window into square regions. A way to overcome this effect is to take windows that are not rectangular(i.e. circular windows) and separate them into more non-rectangular regions. There have also been approaches where the filter adapts its window depending on the input image. == Extensions of the Kuwahara filter == The success of the Kuwahara filter has spurred an increase the development of edge-enhancing smoothing filters. Several variations have been proposed for similar use most of which attempt to deal with the drawbacks of the original Kuwahara filter. The "Generalized Kuwahara filter" proposed by P. Bakker considers several windows that contain a fixed pixel. Each window is then assigned an estimate and a confidence value. The value of the fixed pixel then takes the value of the estimate of the window with the highest confidence. This filter is not characterized by the same ambiguity in the presence of noise and manages to eliminate the block artifacts. The "Mean of Least Variance"(MLV) filter, proposed by M.A. Schulze also produces edge-enhancing smoothing results in images. Similarly to the Kuwahara filter it assumes a window of size 2 d − 1 × 2 d − 1 {\displaystyle 2d-1\times 2d-1} but instead of searching amongst four subregions of size d × d {\displaystyle d\times d} for the one with minimum variance it searches amongst all possible d × d {\displaystyle d\times d} subregions. This means the central pixel of the window will be assigned the mean of the one subregion out of a poss
Tabletopia
Tabletopia is an online portal for users to play and create virtual tabletop games. The platform is developed by Tabletopia Inc and initially was released as a web browser based service after a successful crowdfunding campaign in August 2015. In December 2016 Tabletopia was released on Steam, and later in 2018 became available in AppStore and Google Play. == Gameplay == Tabletopia is a sandbox system for running any game. That means no AI or rules enforcement. Participating players will have to know how to play the game. Nevertheless, the platform has some automated actions available, like card-shuffling and dealing, dice-rolling, magnetic placement of components in special zones, hand management, and some others. Tabletopia also features ready game setups for various player numbers to facilitate gameplay. It also has customisable camera controls which let players save camera positions and switch between them using hot keys. People can use the Game Designer mode to design and create their own board games using the component library. They can then monetise the games with a 70/30 split to the game designer. == Development == Tabletopia was created in early 2014, by Tim Bokarev and his partners Artem Zinoviev and Dmitry Sergeev. These co-founders already had experience in the video and board games industry. Their other projects include Promo Interactive, an internet advertising agency, Playtox, a mobile MMORPG, Igrology, a game studio, and Tesera.ru, the main Russian-speaking board gaming portal. By Spring 2014, Artem, Dmitry and Tim created Tabletopia Inc. USA and started development. Tabletopia is a multinational crew that includes professionals from USA, Ukraine, Australia, Ireland, and Germany. The Kickstarter campaign in August 2015 earned $133,721 by 2,545 backers. Tabletopia received Green Light on Steam in September 2015 and was released on Steam in March 2016. The platform remained in Early Access until December 2016, when it was officially released on Steam and on the web. In February 2018 it was released as a stand-alone app for iOS tablets, and in September 2018 for Android tablets.
Dropbox Paper
Dropbox Paper, or simply Paper, is a collaborative document-editing service developed by Dropbox. Originating from the company's acquisition of document collaboration company Hackpad in April 2014, Dropbox Paper was officially announced in October 2015, and launched in January 2017. It offers a web application, as well as mobile apps for Android and iOS. Dropbox Paper was described in the official announcement post as "a flexible workspace that brings people and ideas together. With Paper, teams can create, review, revise, manage, and organize — all in shared documents". Reception of Dropbox Paper has been mixed. Critics praised collaboration functionality, including content available immediately, the ability to mention specific collaborators, assign tasks, write comments, as well as editing attribution, and revision history. It received particular praise for its support for rich media from a variety of sources, with one reviewer noting that the Paper's support for rich media exceeds the capabilities of most of its competitors. However, it was criticized for a lack of formatting options and editing features. While the user interface was liked for being minimal, reviewers cited the lack of a fixed formatting bar and missing features present in competitors' products as making Dropbox Paper seem like a "light" tool. == History == Dropbox acquired document collaboration company Hackpad in April 2014. A year later, Dropbox launched a Dropbox Notes note-taking product in beta testing phase. Dropbox Paper was officially announced on October 15, 2015, followed by an open beta and release of mobile Android and iOS apps in August 2016. Dropbox Paper was officially released on January 30, 2017. == Reception == In a comparison between Dropbox Paper and Evernote, PC World's Michael Ansaldo wrote that "With its emphasis on document creation, you might expect formatting to be front and center in Dropbox Paper. That's not the case." Ansaldo noted the lack of a "fixed formatting toolbar as you'd find in Evernote or a word processor like Google Docs or Microsoft Word. Instead, the text editor appears as a floating ribbon only when you highlight selected text." The only formatting options available for emphasis were bolding, strikethrough, bulleted and numbered lists, and H1 and H2 tags. Users can also add links, convert text to checklists, and add comments. Ansaldo wrote that "Both Evernote and Dropbox Paper make it easy to add images to a document", but also noted that "Dropbox Paper doesn't support any image editing". Paper supports rich media, and users can "add rich content to your document just by pasting a link to the file. In addition to Dropbox, Paper supports media from a variety of popular services including YouTube, Spotify, Vimeo, SoundCloud, Facebook, and Google's productivity suite. Once the file appears, you can delete the link for a cleaner display." To start working with other people, Paper "allows you to invite people via email from within a document", with sharing options for who can view the link (anyone with the link or just the invited person), and action permissions (edit or only comment). Regarding collaboration, Ansaldo wrote that "Creative collaboration is Paper’s marquee feature, and it provides a variety of ways to work effectively with others in real time". Users can "make any content immediately visible and accessible to a specific collaborator with "@mentions"", and "You can also use @mentions to create and assign task lists within a document." Paper also "boasts essential collaboration tools including comments, editing attribution, and revision history." Writing for TechRadar, John Brandon wrote that Dropbox Paper "might be a 'light' tool for now without the extensive templates of Microsoft Office or the integration with other apps in the Zoho suite, but it does work well with the Dropbox storage service that's so popular with office workers these days." Kyle Wiggers of Digital Trends wrote that Paper is "all about minimizing distractions. Its interface is quite literally a big, blank canvas on which you tap out your agenda. You can organize notes by title and create to-do lists, but even basic formatting tools are obscured from view", noting Paper's "floating box above words and phrases highlighted by your cursor". Wiggers stated that "Paper is not a to-do organizer", but that it's "well suited to the purpose thanks to a bevy of labor-saving conveniences", highlighting that Paper "supports more media than most of its to-do and note-taking counterparts". He praised the collaboration tools, writing that they "are as extensive as you'd hope, and then some", citing its invitation system with permission controls, lists of changes and revision history, comment and chat support, and "perhaps best of all", the ability to assign tasks with a "@" mention. Business Insider's Alex Heath praised that "Paper's interface is spotless and friendly to write in. You don't feel overwhelmed with formatting options", but criticized the available features, writing that "Google Docs is much more full-featured in the formatting department, so Paper has some catching up to do if it wants to be on par with the competition". Writing for The Verge, Casey Newton praised Paper's handling of rich media, complimenting it for being "great", and added that "I imagine that creative types who work on teams will appreciate having rich media embedded in the documents they're working on rather than in a series of infinite tabs".
Clone tool
The clone tool, as it is known in Adobe Photoshop, Inkscape, GIMP, and Corel PhotoPaint, is used in digital image editing to replace information for one part of a picture with information from another part. In other image editing software, its equivalent is sometimes called a rubber stamp tool or a clone brush. == Applications == The clone tool can remove objects by copying a nearby background. The user selects a matching location as the source, then paints over the element to be hidden. A typical use for the tool is in object removal – more colloquially, "airbrushing" or "photoshopping" out an unwanted part of the image. If a part of an image is removed simply by cutting it out, then a hole is left in the background. The Clone tool can fill in this hole convincingly with a copy of the existing background from elsewhere in the image. A common use for this tool is to retouch skin, particularly in portraits, to remove blemishes and make skin tones more even. Cloning can also be used to remove other unwanted elements, such as telephone wires, an unwanted bird in the sky, and the like. A more automated method of object removal uses texture synthesis to fill in gaps. Of these, patch-based texture synthesis or "image quilting" is essentially an automated application of the clone tool, choosing the optimal source area so as to patch over with a minimal seam. In some cases, the undesired object is mixed with the remainder of the image, and a simple circular brush, even with feathering, would not work. For these cases, some programs allow an object to be selected by color/outline so other areas are not affected. Other programs allow edge/color sensitive brushes to deal with such objects. == Healing tool == A similar tool is the healing tool, which occurs in variants such as the healing brush or spot healing tool. These incorporate the existing texture, rather than painting it over.
Feature engineering
Feature engineering is a preprocessing step in supervised machine learning and statistical modeling which transforms raw data into a more effective set of inputs. Each input comprises several attributes, known as features. By providing models with relevant information, feature engineering significantly enhances their predictive accuracy and decision-making capability. Beyond machine learning, the principles of feature engineering are applied in various scientific fields, including physics. For example, physicists construct dimensionless numbers such as the Reynolds number in fluid dynamics, the Nusselt number in heat transfer, and the Archimedes number in sedimentation. They also develop first approximations of solutions, such as analytical solutions for the strength of materials in mechanics. == Clustering == One of the applications of feature engineering has been clustering of feature-objects or sample-objects in a dataset. Especially, feature engineering based on matrix decomposition has been extensively used for data clustering under non-negativity constraints on the feature coefficients. These include Non-Negative Matrix Factorization (NMF), Non-Negative Matrix-Tri Factorization (NMTF), Non-Negative Tensor Decomposition/Factorization (NTF/NTD), etc. The non-negativity constraints on coefficients of the feature vectors mined by the above-stated algorithms yields a part-based representation, and different factor matrices exhibit natural clustering properties. Several extensions of the above-stated feature engineering methods have been reported in literature, including orthogonality-constrained factorization for hard clustering, and manifold learning to overcome inherent issues with these algorithms. Other classes of feature engineering algorithms include leveraging a common hidden structure across multiple inter-related datasets to obtain a consensus (common) clustering scheme. An example is Multi-view Classification based on Consensus Matrix Decomposition (MCMD), which mines a common clustering scheme across multiple datasets. MCMD is designed to output two types of class labels (scale-variant and scale-invariant clustering), and: is computationally robust to missing information, can obtain shape- and scale-based outliers, and can handle high-dimensional data effectively. Coupled matrix and tensor decompositions are popular in multi-view feature engineering. == Predictive modelling == Feature engineering in machine learning and statistical modeling involves selecting, creating, transforming, and extracting data features. Key components include feature creation from existing data, transforming and imputing missing or invalid features, reducing data dimensionality through methods like Principal Components Analysis (PCA), Independent Component Analysis (ICA), and Linear Discriminant Analysis (LDA), and selecting the most relevant features for model training based on importance scores and correlation matrices. Features vary in significance. Even relatively insignificant features may contribute to a model. Feature selection can reduce the number of features to prevent a model from becoming too specific to the training data set (overfitting). Feature explosion occurs when the number of identified features is too large for effective model estimation or optimization. Common causes include: Feature templates - implementing feature templates instead of coding new features Feature combinations - combinations that cannot be represented by a linear system Feature explosion can be limited via techniques such as regularization, kernel methods, and feature selection. == Automation == Automation of feature engineering is a research topic that dates back to the 1990s. Machine learning software that incorporates automated feature engineering has been commercially available since 2016. Related academic literature can be roughly separated into two types: Multi-relational Decision Tree Learning (MRDTL) uses a supervised algorithm that is similar to a decision tree. Deep Feature Synthesis uses simpler methods. === Multi-relational Decision Tree Learning (MRDTL) === Multi-relational Decision Tree Learning (MRDTL) extends traditional decision tree methods to relational databases, handling complex data relationships across tables. It innovatively uses selection graphs as decision nodes, refined systematically until a specific termination criterion is reached. Most MRDTL studies base implementations on relational databases, which results in many redundant operations. These redundancies can be reduced by using techniques such as tuple id propagation. === Open-source implementations === There are a number of open-source libraries and tools that automate feature engineering on relational data and time series: featuretools is a Python library for transforming time series and relational data into feature matrices for machine learning. MCMD: An open-source feature engineering algorithm for joint clustering of multiple datasets. OneBM or One-Button Machine combines feature transformations and feature selection on relational data with feature selection techniques. OneBM helps data scientists reduce data exploration time allowing them to try and error many ideas in short time. On the other hand, it enables non-experts, who are not familiar with data science, to quickly extract value from their data with a little effort, time, and cost. getML community is an open source tool for automated feature engineering on time series and relational data. It is implemented in C/C++ with a Python interface. It has been shown to be at least 60 times faster than tsflex, tsfresh, tsfel, featuretools or kats. tsfresh is a Python library for feature extraction on time series data. It evaluates the quality of the features using hypothesis testing. tsflex is an open source Python library for extracting features from time series data. Despite being 100% written in Python, it has been shown to be faster and more memory efficient than tsfresh, seglearn or tsfel. seglearn is an extension for multivariate, sequential time series data to the scikit-learn Python library. tsfel is a Python package for feature extraction on time series data. kats is a Python toolkit for analyzing time series data. === Deep feature synthesis === The deep feature synthesis (DFS) algorithm beat 615 of 906 human teams in a competition. == Feature stores == The feature store is where the features are stored and organized for the explicit purpose of being used to either train models (by data scientists) or make predictions (by applications that have a trained model). It is a central location where you can either create or update groups of features created from multiple different data sources, or create and update new datasets from those feature groups for training models or for use in applications that do not want to compute the features but just retrieve them when it needs them to make predictions. A feature store includes the ability to store code used to generate features, apply the code to raw data, and serve those features to models upon request. Useful capabilities include feature versioning and policies governing the circumstances under which features can be used. Feature stores can be standalone software tools or built into machine learning platforms. == Alternatives == Feature engineering can be a time-consuming and error-prone process, as it requires domain expertise and often involves trial and error. Deep learning algorithms may be used to process a large raw dataset without having to resort to feature engineering. However, deep learning algorithms still require careful preprocessing and cleaning of the input data. In addition, choosing the right architecture, hyperparameters, and optimization algorithm for a deep neural network can be a challenging and iterative process.
Summify
Summify was a social news aggregator founded by Mircea Paşoi and Cristian Strat, two former Google and Microsoft interns from Romania. The service emailed its users a periodic summary of news articles shared from their social networks based on their relevance and importance. The platform supported Twitter, Facebook, and Google Reader accounts. == History == In 2009, Paşoi and Strat created ReadFu, a plugin that provided a contextual summary and statistics of the target page of a hyperlink. In January 2010, ReadFu was accepted into the Vancouver-based start-up incubator Bootup Labs. On March 20, 2010 the service was renamed to Summify and a private beta began. On August 11, 2010 Paşoi and Strat announced a new direction for the service. It would become a real-time social news reader that aggregates incoming news from social networks and displays articles by importance using social reactions. After some feedback that the users preferred article digests by email more than the real-time news reader version, Summify discontinued the news reader version. In March 2011, Summify completed a Seed round, with investors including Rob Glaser, Accel Partners, and Stewart Butterfield. Summify received coverage from various news and media outlets such as TechCrunch. It was also featured in various news platforms, such as Time, The Globe and Mail, Mashable, VentureBeat, Gizmodo, Lifehacker, and The Next Web. Summify released a free app on the Apple App Store on July 8, 2011. The app allowed users to read their web summaries from iOS mobile devices. Summify was acquired by Twitter on January 19, 2012. The service shut down soon after, on June 22, 2012.