The Intel Management Engine (ME), also known as the Intel Manageability Engine, is an autonomous subsystem that has been incorporated in virtually all of Intel's processor chipsets since 2008. It is located in the Platform Controller Hub of modern Intel motherboards. The Intel Management Engine always runs as long as the motherboard is receiving power, even when the computer is turned off. This issue can be mitigated with the deployment of a hardware device which is able to disconnect all connections to mains power as well as all internal forms of energy storage. The Electronic Frontier Foundation and some security researchers have voiced concern that the Management Engine is a backdoor. Intel's main competitor, AMD, has incorporated the equivalent AMD Secure Technology (formally called Platform Security Processor) in virtually all of its post-2013 CPUs. == Difference from Intel AMT == The Management Engine is often confused with Intel AMT (Intel Active Management Technology). AMT runs on the ME, but is only available on processors with vPro. AMT gives device owners remote administration of their computer, such as powering it on or off, and reinstalling the operating system. However, the ME itself has been built into all Intel chipsets since 2008, not only those with AMT. While AMT can be unprovisioned by the owner, there is no official, documented way to disable the ME. == Design == The subsystem primarily consists of proprietary firmware running on a separate microprocessor that performs tasks during boot-up, while the computer is running, and while it is asleep. As long as the chipset or SoC is supplied with power (via battery or power supply), it continues to run even when the system is turned off. Intel claims the ME is required to provide full performance. Its exact workings are largely undocumented and its code is obfuscated using confidential Huffman tables stored directly in hardware, so the firmware does not contain the information necessary to decode its contents. === Hardware === Starting with ME 11 (introduced in Skylake CPUs), it is based on the Intel Quark x86-based 32-bit CPU and runs the MINIX 3 operating system. The ME firmware is stored in a partition of the SPI BIOS Flash, using the Embedded Flash File System (EFFS). Previous versions were based on an ARC core, with the Management Engine running the ThreadX RTOS. Versions 1.x to 5.x of the ME used the ARCTangent-A4 (32-bit only instructions) whereas versions 6.x to 8.x used the newer ARCompact (mixed 32- and 16-bit instruction set architecture). Starting with ME 7.1, the ARC processor could also execute signed Java applets. The ME has its own MAC and IP address for the out-of-band management interface, with direct access to the Ethernet controller; one portion of the Ethernet traffic is diverted to the ME even before reaching the host's operating system, for what support exists in various Ethernet controllers, exported and made configurable via Management Component Transport Protocol (MCTP). The ME also communicates with the host via PCI interface. Under Linux, communication between the host and the ME is done via /dev/mei or /dev/mei0. Until the release of Nehalem processors, the ME was usually embedded into the motherboard's northbridge, following the Memory Controller Hub (MCH) layout. With the newer Intel architectures (Intel 5 Series onwards), the ME is integrated into the Platform Controller Hub (PCH). === Firmware === By Intel's current terminology as of 2017, ME is one of several firmware sets for the Converged Security and Manageability Engine (CSME). Prior to AMT version 11, CSME was called Intel Management Engine BIOS Extension (Intel MEBx). Management Engine (ME) – mainstream chipsets Server Platform Services (SPS) – server chipsets and SoCs Trusted Execution Engine (TXE) – tablet/embedded/low power It was also found that the ME firmware version 11 runs MINIX 3. Management of the ME modules for provisioning inside the UEFI is done via a tool called Intel Flash Image Tool (FITC). ==== Modules ==== Active Management Technology (AMT) Intel Boot Guard (IBG) and Secure Boot Quiet System Technology (QST), formerly known as Advanced Fan Speed Control (AFSC), which provides support for acoustically optimized fan speed control, and monitoring of temperature, voltage, current and fan speed sensors that are provided in the chipset, CPU and other devices present on the motherboard. Communication with the QST firmware subsystem is documented and available through the official software development kit (SDK). Protected Audio Video Path, enforces HDCP Intel Anti-Theft Technology (AT), discontinued in 2015 Serial over LAN (SOL) Intel Platform Trust Technology (PTT), a firmware-based Trusted Platform Module (TPM) Near Field Communication, a middleware for NFC readers and vendors to access NFC cards and provide secure element access, found in later MEI versions. == The intricacies of working with Intel ME == It should also be noted that the ME region requires special cleaning and subsequent initialisation, for example, after replacing the platform hub on the motherboard. Usually, this requires an SPI programmer. There are known successful cases of this operation being performed. == Security vulnerabilities == Several weaknesses have been found in the ME. On May 1, 2017, Intel confirmed a Remote Elevation of Privilege bug (SA-00075) in its Management Technology. Every Intel platform with provisioned Intel Standard Manageability, Active Management Technology, or Small Business Technology, from Nehalem in 2008 to Kaby Lake in 2017 has a remotely exploitable security hole in the ME. Several ways to disable the ME without authorization that could allow ME's functions to be sabotaged have been found. Additional major security flaws in the ME affecting a very large number of computers incorporating ME, Trusted Execution Engine (TXE), and Server Platform Services (SPS) firmware, from Skylake in 2015 to Coffee Lake in 2017, were confirmed by Intel on November 20, 2017 (SA-00086). Unlike SA-00075, this bug is even present if AMT is absent, not provisioned or if the ME was "disabled" by any of the known unofficial methods. In July 2018, another set of vulnerabilities was disclosed (SA-00112). In September 2018, yet another vulnerability was published (SA-00125). === Ring −3 rootkit === A ring −3 rootkit was demonstrated by Invisible Things Lab for the Q35 chipset; it does not work for the later Q45 chipset as Intel implemented additional protections. The exploit worked by remapping the normally protected memory region (top 16 MB of RAM) reserved for the ME. The ME rootkit could be installed regardless of whether the AMT is present or enabled on the system, as the chipset always contains the ARC ME coprocessor. (The "−3" designation was chosen because the ME coprocessor works even when the system is in the S3 state. Thus, it was considered a layer below the System Management Mode rootkits.) For the vulnerable Q35 chipset, a keystroke logger ME-based rootkit was demonstrated by Patrick Stewin. === Zero-touch provisioning === Another security evaluation by Vassilios Ververis showed serious weaknesses in the GM45 chipset implementation. In particular, it criticized AMT for transmitting unencrypted passwords in the SMB provisioning mode when the IDE redirection and Serial over LAN features are used. It also found that the "zero touch" provisioning mode (ZTC) is still enabled even when the AMT appears to be disabled in BIOS. For about 60 euros, Ververis purchased from GoDaddy a certificate that is accepted by the ME firmware and allows remote "zero touch" provisioning of (possibly unsuspecting) machines, which broadcast their HELLO packets to would-be configuration servers. === SA-00075 (a.k.a. Silent Bob is Silent) === In May 2017, Intel confirmed that many computers with AMT have had an unpatched critical privilege escalation vulnerability (CVE-2017-5689). The vulnerability was nicknamed "Silent Bob is Silent" by the researchers who had reported it to Intel. It affects numerous laptops, desktops and servers sold by Dell, Fujitsu, Hewlett-Packard (later Hewlett Packard Enterprise and HP Inc.), Intel, Lenovo, and possibly others. Those researchers claimed that the bug affects systems made in 2010 or later. Other reports claimed the bug also affects systems made as long ago as 2008. The vulnerability was described as giving remote attackers: "full control of affected machines, including the ability to read and modify everything. It can be used to install persistent malware (possibly in firmware), and read and modify any data." === PLATINUM === In June 2017, the PLATINUM cybercrime group became notable for exploiting the serial over LAN (SOL) capabilities of AMT to perform data exfiltration of stolen documents. SOL is disabled by default and must be enabled to exploit this vulnerability. === SA-00086 === Some months after the previous bugs, and subsequent warnings from the EFF, securi
Human Race Machine
The Human Race Machine (HRM) is a computerized console composed of four different programs. The Human Race Machine program allows participants to see themselves with the facial characteristics of six different races: Asian, White, African, Middle Eastern, and Indian, mapped onto their own face. The Age Machine allows viewers see an aged version of his or her face. A version of this methodology has been used for over twenty years by the FBI and the National Center for Missing and Exploited Children to help locate kidnap victims and missing children. The Couples Machine combines photographs of two people in different percentages to show the appearance of their child. The Anomaly Machine lets viewers see themselves with facial anomalies. The HRM was created by artist Nancy Burson and David Kramlich; it uses morphing technology. It was shown on Oprah on 2006-02-16.
DreamBooth
DreamBooth is a deep learning generation model used to personalize existing text-to-image models by fine-tuning. It was developed by researchers from Google Research and Boston University in 2022. Originally developed using Google's own Imagen text-to-image model, DreamBooth implementations can be applied to other text-to-image models, where it can allow the model to generate more fine-tuned and personalized outputs after training on three to five images of a subject. == Technology == Pretrained text-to-image diffusion models, while often capable of offering a diverse range of different image output types, lack the specificity required to generate images of lesser-known subjects, and are limited in their ability to render known subjects in different situations and contexts. The methodology used to run implementations of DreamBooth involves the fine-tuning the full UNet component of the diffusion model using a few images (usually 3--5) depicting a specific subject. Images are paired with text prompts that contain the name of the class the subject belongs to, plus a unique identifier. As an example, a photograph of a [Nissan R34 GTR] car, with car being the class); a class-specific prior preservation loss is applied to encourage the model to generate diverse instances of the subject based on what the model is already trained on for the original class. Pairs of low-resolution and high-resolution images taken from the set of input images are used to fine-tune the super-resolution components, allowing the minute details of the subject to be maintained. == Usage == DreamBooth can be used to fine-tune models such as Stable Diffusion, where it may alleviate a common shortcoming of Stable Diffusion not being able to adequately generate images of specific individual people. Such a use case is quite VRAM intensive, however, and thus cost-prohibitive for hobbyist users. The Stable Diffusion adaptation of DreamBooth in particular is released as a free and open-source project based on the technology outlined by the original paper published by Ruiz et. al. in 2022. Concerns have been raised regarding the ability for bad actors to utilise DreamBooth to generate misleading images for malicious purposes, and that its open-source nature allows anyone to utilise or even make improvements to the technology. In addition, artists have expressed their apprehension regarding the ethics of using DreamBooth to train model checkpoints that are specifically aimed at imitating specific art styles associated with human artists; one such critic is Hollie Mengert, an illustrator for Disney and Penguin Random House who has had her art style trained into a checkpoint model via DreamBooth and shared online, without her consent.
Reason maintenance
Reason maintenance is a knowledge representation approach to efficient handling of inferred information that is explicitly stored. Reason maintenance distinguishes between base facts, which can be defeated, and derived facts. As such it differs from belief revision which, in its basic form, assumes that all facts are equally important. Reason maintenance was originally developed as a technique for implementing problem solvers. It encompasses a variety of techniques that share a common architecture: two components—a reasoner and a reason maintenance system—communicate with each other via an interface. The reasoner uses the reason maintenance system to record its inferences and justifications of ("reasons" for) the inferences. The reasoner also informs the reason maintenance system which are the currently valid base facts (assumptions). The reason maintenance system uses the information to compute the truth value of the stored derived facts and to restore consistency if an inconsistency is derived. == Truth maintenance system == A truth maintenance system, or TMS, is a knowledge representation method for representing both beliefs and their dependencies and an algorithm called the "truth maintenance algorithm" that manipulates and maintains the dependencies. The name truth maintenance is due to the ability of these systems to restore consistency. A truth maintenance system maintains consistency between old believed knowledge and current believed knowledge in the knowledge base (KB) through revision. If the current believed statements contradict the knowledge in the KB, then the KB is updated with the new knowledge. It may happen that the same data will again be believed, and the previous knowledge will be required in the KB. If the previous data are not present, but may be required for new inference. But if the previous knowledge was in the KB, then no retracing of the same knowledge is needed. The use of TMS avoids such retracing; it keeps track of the contradictory data with the help of a dependency record. This record reflects the retractions and additions which makes the inference engine (IE) aware of its current belief set. == Algorithm == Each statement having at least one valid justification is made a part of the current belief set. When a contradiction is found, the statement(s) responsible for the contradiction are identified and the records are appropriately updated. This process is called dependency-directed backtracking. The TMS algorithm maintains the records in the form of a dependency network. Each node in the network is an entry in the KB (a premise, antecedent, or inference rule etc.) Each arc of the network represent the inference steps through which the node was derived. A premise is a fundamental belief which is assumed to be true. They do not need justifications. The set of premises are the basis from which justifications for all other nodes will be derived. == Justification == There are two types of justification for a node. They are: Support list [SL] Conditional proof (CP) == Examples == Many kinds of truth maintenance systems exist. Two major types are single-context and multi-context truth maintenance. In single context systems, consistency is maintained among all facts in memory (KB) and relates to the notion of consistency found in classical logic. Multi-context systems support paraconsistency by allowing consistency to be relevant to a subset of facts in memory, a context, according to the history of logical inference. This is achieved by tagging each fact or deduction with its logical history. Multi-agent truth maintenance systems perform truth maintenance across multiple memories, often located on different machines. de Kleer's assumption-based truth maintenance system (ATMS, 1986) was utilized in systems based upon KEE on the Lisp Machine. The first multi-agent TMS was created by Mason and Johnson. It was a multi-context system. Bridgeland and Huhns created the first single-context multi-agent system.
Botler AI
Botler AI is a Montreal-based Canadian Artificial Intelligence company that helps users navigate the legal system. Launched in 2017 by Amir Morv and Ritika Dutt, Botler offers a free online tool which provides users who are unaware of their legal rights with information and guidance. Botler is known for its role in unveiling misconduct in the Government of Canada's procurement practices. Botler's findings have prompted numerous investigations, including by the Royal Canadian Mounted Police. == History == Botler's first AI was trained on over 300,000 U.S. and Canadian legal documents to help individuals identify and enforce their legal rights, without fear of judgment. Launched during the height of the #MeToo movement, the tool initially focused on sexual harassment with a goal of creating "a general artificial intelligence that would help the average person with any legal issue." === Department of Justice Canada === In 2020, Botler launched an expanded misconduct detection system in the form of an anonymous chatbot which provided users with an explanation of the law and relevant resources. In March 2021, the Minister of Justice and Attorney General of Canada announced the Government of Canada's support for Botler AI to assist complainants of sexual harassment in the workplace. The initiative, entitled Botler for Citizens and implemented with the support of the Department of Justice Canada, established an Artificial Intelligence-powered hybrid legal service delivery model. == Notable cases == On October 4, 2023, the RCMP confirmed to The Globe and Mail that they "are investigating a file referred from the CBSA (Canada Border Services Agency) that is based on allegations brought to their attention by Botler". In 2019, GCStrategies's managing partner, Kristian Firth, reached out to Botler on behalf of his client, the CBSA, to solicit their misconduct detection chatbot. After interactions with GCStrategies, Dalian Enterprises and Coradix Technology Consulting, the three main contractors involved in developing the controversial ArriveCAN app, Dutt and Morv alerted the CBSA to questionable contracting practices in federal government procurement in September, 2021, and again in November, 2022. In response to Botler's November 2022 report, the CBSA launched an internal review and referred the matter to the RCMP. During testimony before a parliamentary committee, the CBSA's President stated that the CBSA investigation to date has raised some concerns and shows "that there was a pattern of persistent collaboration between certain officials and GCStrategies... to circumvent or ignore certain established processes and roles and responsibilities". The Auditor General of Canada, which extended its study into ArriveCAN following the Botler revelations, found that GCStrategies was directly involved in setting narrow terms for a request for proposal for a $25-million government contract it ultimately won. The firm, which has just two employees, charges the government a commission of between 15 per cent and 30 per cent of each contract's value. The Office of the Procurement Ombudsman of Canada found "numerous examples" where GCStrategies "had simply copied and pasted" the required work experience to meet contracting requirements. To date, more than a dozen probes have been launched into the matter, including by the government, parliamentary committees, independent watchdogs and law-enforcement agencies. On April 17, 2024, GCStrategies' Firth was the first person summoned in over a century to answer questions before Members of Parliament in the House of Commons. During his appearance, Firth testified that the RCMP had raided "my property to obtain electronic goods surrounding the Botler allegations". === Government of Canada Reforms === One day after The Globe reported that the RCMP is investigating allegations of misconduct, the federal government responded by announcing new guidelines from the Treasury Board of Canada aimed at cutting back on the use of private consultants and that outsourcing contracts were under examination. Public Services and Procurement Canada (PSPC) invalidated and replaced all master level user agreements with government client departments in November 2023. The agreements set out the conditions for access to select Professional Services methods of supply which are used for outsourcing. In March 2024, PSPC announced its suspension of the respective security statuses of GCStrategies, Dalian and Coradix, barring them from participating in all federal procurements. Records show that the total value of contracts awarded to the three companies amounts to more than $1 Billion.
Database
In computing, a database is an organized collection of data or a type of data store based on the use of a database management system (DBMS), the software that interacts with end users, applications, and the database itself to capture and analyze the data. The DBMS additionally encompasses the core facilities provided to administer the database. The sum total of the database, the DBMS and the associated applications can be referred to as a database system. Often the term "database" is also used loosely to refer to any of the DBMS, the database system or an application associated with the database. Before digital storage and retrieval of data became widespread, index cards were used for data storage in a wide range of applications and environments: in the home to record and store recipes, shopping lists, contact information and other organizational data; in business to record presentation notes, project research and notes, and contact information; in schools as flash cards or other visual aids; and in academic research to hold data such as bibliographical citations or notes in a card file. Professional book indexers used index cards in the creation of book indexes until they were replaced by indexing software in the 1980s and 1990s. Small databases can be stored on a file system, while large databases are hosted on computer clusters or cloud storage. The design of databases spans formal techniques and practical considerations, including data modeling, efficient data representation and storage, query languages, security and privacy of sensitive data, and distributed computing issues, including supporting concurrent access and fault tolerance. Computer scientists may classify database management systems according to the database models that they support. Relational databases became dominant in the 1980s. These model data as rows and columns in a series of tables, and the vast majority use SQL for writing and querying data. In the 2000s, non-relational databases became popular, collectively referred to as NoSQL, because they use different query languages. == Terminology and overview == Formally, a "database" refers to a set of related data accessed through the use of a "database management system" (DBMS), which is an integrated set of computer software that allows users to interact with one or more databases and provides access to all of the data contained in the database (although restrictions may exist that limit access to particular data). The DBMS provides various functions that allow entry, storage and retrieval of large quantities of information and provides ways to manage how that information is organized. Because of the close relationship between them, the term "database" is often used casually to refer to both a database and the DBMS used to manipulate it. Outside the world of professional information technology, the term database is often used to refer to any collection of related data (such as a spreadsheet or a card index) as size and usage requirements typically necessitate use of a database management system. Existing DBMSs provide various functions that allow management of a database and its data which can be classified into four main functional groups: Data definition – Creation, modification and removal of definitions that detail how the data is to be organized. Update – Insertion, modification, and deletion of the data itself. Retrieval – Selecting data according to specified criteria (e.g., a query, a position in a hierarchy, or a position in relation to other data) and providing that data either directly to the user, or making it available for further processing by the database itself or by other applications. The retrieved data may be made available in a more or less direct form without modification, as it is stored in the database, or in a new form obtained by altering it or combining it with existing data from the database. Administration – Registering and monitoring users, enforcing data security, monitoring performance, maintaining data integrity, dealing with concurrency control, and recovering information that has been corrupted by some event such as an unexpected system failure. Both a database and its DBMS conform to the principles of a particular database model. "Database system" refers collectively to the database model, database management system, and database. Physically, database servers are dedicated computers that hold the actual databases and run only the DBMS and related software. Database servers are usually multiprocessor computers, with generous memory and RAID disk arrays used for stable storage. Hardware database accelerators, connected to one or more servers via a high-speed channel, are also used in large-volume transaction processing environments. DBMSs are found at the heart of most database applications. DBMSs may be built around a custom multitasking kernel with built-in networking support, but modern DBMSs typically rely on a standard operating system to provide these functions. Since DBMSs comprise a significant market, computer and storage vendors often take into account DBMS requirements in their own development plans. Databases and DBMSs can be categorized according to the database model(s) that they support (such as relational or XML), the type(s) of computer they run on (from a server cluster to a mobile phone), the query language(s) used to access the database (such as SQL or XQuery), and their internal engineering, which affects performance, scalability, resilience, and security. == History == The sizes, capabilities, and performance of databases and their respective DBMSs have grown in orders of magnitude. These performance increases were enabled by the technology progress in the areas of processors, computer memory, computer storage, and computer networks. The concept of a database was made possible by the emergence of direct access storage media such as magnetic disks, which became widely available in the mid-1960s; earlier systems relied on sequential storage of data on magnetic tape. The subsequent development of database technology can be divided into three eras based on data model or structure: navigational, SQL/relational, and post-relational. The two main early navigational data models were the hierarchical model and the CODASYL model (network model). These were characterized by the use of pointers (often physical disk addresses) to follow relationships from one record to another. The relational model, first proposed in 1970 by Edgar F. Codd, departed from this tradition by insisting that applications should search for data by content, rather than by following links. The relational model employs sets of ledger-style tables, each used for a different type of entity. Only in the mid-1980s did computing hardware become powerful enough to allow the wide deployment of relational systems (DBMSs plus applications). By the early 1990s, however, relational systems dominated in all large-scale data processing applications, and as of 2018 they remain dominant: IBM Db2, Oracle, MySQL, and Microsoft SQL Server are the most searched DBMS. The dominant database language, standardized SQL for the relational model, has influenced database languages for other data models. Object databases were developed in the 1980s to overcome the inconvenience of object–relational impedance mismatch, which led to the coining of the term "post-relational" and also the development of hybrid object–relational databases. The next generation of post-relational databases in the late 2000s became known as NoSQL databases, introducing fast key–value stores and document-oriented databases. A competing "next generation" known as NewSQL databases attempted new implementations that retained the relational/SQL model while aiming to match the high performance of NoSQL compared to commercially available relational DBMSs. === 1960s, navigational DBMS === The introduction of the term database coincided with the availability of direct-access storage (disks and drums) from the mid-1960s onwards. The term represented a contrast with the tape-based systems of the past, allowing shared interactive use rather than daily batch processing. The Oxford English Dictionary cites a 1962 report by the System Development Corporation of California as the first to use the term "data-base" in a specific technical sense. As computers grew in speed and capability, a number of general-purpose database systems emerged; by the mid-1960s a number of such systems had come into commercial use. Interest in a standard began to grow, and Charles Bachman, author of one such product, the Integrated Data Store (IDS), founded the Database Task Group within CODASYL, the group responsible for the creation and standardization of COBOL. In 1971, the Database Task Group delivered their standard, which generally became known as the CODASYL approach, and soon a number of commercial products based on this approach entered the market. The CODASYL approach of
ProVisual Engine
The ProVisual Engine is an AI-powered imaging system developed by Samsung Electronics for mobile devices. It was introduced in 2024 with the Galaxy S24 series as a component of Samsung's Galaxy AI ecosystem, providing advanced image processing to enhance image quality in photography and videography. == Overview == The ProVisual Engine processes images using adaptive scene recognition, real-time optimization, and advanced image processing. It adjusts color accuracy, dynamic range, and noise levels, providing both automated and manual controls to accommodate various user preferences. == Features == The ProVisual Engine encompasses several features. === Quad Tele System === The Quad Tele System features 2x, 3x, 5x, and 10x optical zoom, supported by digital processing to enhance zoom clarity and detail. It incorporates Image Signal Processing (ISP) to refine detail retention, reduce noise, and enhance image clarity at different zoom levels while minimizing distortion. === Nightography === Nightography utilizes noise reduction techniques and advanced sensor technology to enhance low-light photography. By adjusting exposure and minimizing motion blur, the system helps produce more precise and more detailed images in dark environments for both photos and videos. === Generative Edit === Generative Edit allows for object removal, background expansion, and intelligent resizing. It reconstructs missing areas by filling backgrounds and completing cut-off objects, adjusting composition while preserving image integrity and refinement. === Expert RAW === Expert RAW allows users to capture RAW images directly from the camera app for advanced shooting and editing. It includes HDR (High Dynamic Range) support to enhance detail and dynamic range. The ProVisual Engine utilizes multi-frame processing to generate RAW images with increased clarity and depth for post-processing. === Enhance-X and Camera Shift === Enhance-X is an AI-based image processing tool that applies upscaling, noise reduction, and sharpening. Its Camera Shift feature adjusts the perceived camera height by modifying framing and proportions. A recent update extended support to human and pet images. == Compatible devices == As of 2025, the ProVisual Engine is available on the following devices: === Galaxy S series === Galaxy S26 Series (Galaxy S26, S26+. S26 Ultra) Galaxy S25 Series (Galaxy S25, S25+, S25 Edge, S25 Ultra, S25 FE) Galaxy S24 Series (Galaxy S24, S24+, S24 Ultra) === Galaxy Z series === Galaxy Z Fold 7 Galaxy Z Flip 7, Z Flip 7 FE Galaxy Z Fold 6 Galaxy Z Flip 6 === Galaxy Tab S series === Galaxy Tab S10 series (Tab S10+, Tab S10 Ultra) Galaxy Tab S9 series (Tab S9, Tab S9+, Tab S9 Ultra) === Galaxy Z series === Galaxy Z Fold 7, Z Flip 7, Z Flip 7 FE Galaxy Z Fold 6, Z Flip 6 === Galaxy Tab S series === Galaxy Tab S10 series (Tab S10+, Tab S10 Ultra) Galaxy Tab S9 series (Tab S9, Tab S9+, Tab S9 Ultra) Note: Quad Tele System refers to the multi-telephoto setup (2×, 3×, 5×, 10×) available only on the Ultra models (S24 Ultra and S25 Ultra). Note: On Galaxy Tab models, only Enhance-X editing features are supported; the Expert RAW camera app is not available.