Deep Tomographic Reconstruction is a set of methods for using deep learning methods to perform tomographic reconstruction of medical and industrial images. It uses artificial intelligence and machine learning, especially deep artificial neural networks or deep learning, to overcome challenges such as measurement noise, data sparsity, image artifacts, and computational inefficiency. This approach has been applied across various imaging modalities, including CT, MRI, PET, SPECT, ultrasound, and optical imaging == Historical background == Traditional tomographic reconstruction relies on analytic methods such as filtered back-projection, or iterative methods which incrementally compute inverse transformations from measurement data (e.g., Radon or Fourier transform data). However, these approaches are not sufficient for certain imaging techniques such as low-dose CT and fast MRI, or scenarios involving metal artifacts and patient motion. == Use in imaging modalities == === Computed tomography (CT) === In CT, deep learning models can be particularly effective in reducing radiation exposure while maintaining image quality. Deep neural networks can also be able to reconstruct images of fair quality from sparsely sampled data without sacrificing diagnostic performance. Deep learning-based generative AI models can reduce CT metal artifacts. === Magnetic resonance imaging (MRI) === In magnetic resonance imaging (MRI), deep learning can lead to reduced MRI motion artifacts, and increased acquisition speed, referred to as fast MRI. Despite suffering from disadvantages such as lower signal-to-noise ratio (SNR), deep learning can enhance image quality in low field MRI, making these systems clinically viable. === Positron emission tomography (PET) and single-photon emission CT (SPECT) === For PET imaging, deep learning models can provide substantial improvements in low-dose imaging and motion artifact correction. Also, deep learning can help SPECT for generation of attenuation background. A notable technique for PET denoising involves integrating MR data through multimodal networks, which use anatomical information from MRI to enhance PET image quality. === Ultrasound imaging === Deep learning can enhance ultrasound imaging by reducing speckle noise and motion blur. For ultrasound beamforming, deep neural networks can allow superior image quality with limited data at high speed. === Optical imaging and microscopy === Diffuse optical tomography, optical coherence tomography and microscopy can be improved by deep neural networks beyond traditional methods. Furthermore, deep learning can also enhance Photoacoustic imaging (see Deep learning in photoacoustic imaging), addressing challenges like high noise, low contrast, and limited resolution. Deep learning has also been applied to label-free live-cell imaging, where convolutional neural networks predict fluorescence labels from transmitted light images, a technique known as in silico labeling. This method can enable high-throughput, non-invasive cell analysis and phenotyping without the need for traditional fluorescent dyes.
Teleradiology
Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.
Literature review
A literature review is an overview of previously published works on a particular topic. The term can refer to a full scholarly paper or a section of a scholarly work such as books or articles. Either way, a literature review provides the researcher/author and the audiences with general information of an existing knowledge of a particular topic. A good literature review has a proper research question, a proper theoretical framework, and/or a chosen research method. It serves to situate the current study within the body of the relevant literature and provides context for the reader. In such cases, the review usually precedes the methodology and results sections of the work. Producing a literature review is often part of a graduate and post-graduate requirement, included in the preparation of a thesis, dissertation, or a journal article. Literature reviews are also common in a research proposal or prospectus (the document approved before a student formally begins a dissertation or thesis). A literature review can be a type of a review article. In this sense, it is a scholarly paper that presents the current knowledge including substantive findings as well as theoretical and methodological contributions to a particular topic. Literature reviews are secondary sources and do not report new or original experimental work. Most often associated with academic-oriented literature, such reviews are found in academic journals and are not to be confused with book reviews, which may also appear in the same publication. Literature reviews are a basis for research in nearly every academic field. == Types == Since the concept of a systematic review was formalized in the 1970s, a basic division among types of reviews is the dichotomy of narrative reviews versus systematic reviews. The main types of narrative reviews are evaluative, exploratory, and instrumental. A fourth type of review of literature (the scientific literature) is the systematic review but it is not called a literature review, which absent further specification, conventionally refers to narrative reviews. A systematic review focuses on a specific research question to identify, appraise, select, and synthesize all high-quality research evidence and arguments relevant to that question. A meta-analysis is typically a systematic review using statistical methods to effectively combine the data used on all selected studies to produce a more reliable result. Torraco (2016) describes an integrative literature review. The purpose of an integrative literature review is to generate new knowledge on a topic through the process of review, critique, and synthesis of the literature under investigation. George et al (2023) offer an extensive overview of review approaches. They also propose a model for selecting an approach by looking at the purpose, object, subject, community, and practices of the review. They describe six different types of review, each with their own unique purposes: Exploratory or scoping reviews focus on breadth as opposed to depth Systematic or integrative reviews integrate empirical studies on a topic Meta-narrative reviews are qualitative and use literature to compare research or practice communities Problematizing or critical reviews propose new perspectives on a concept by association with other literature Meta-analyses and meta-regressions integrate quantitative studies and identify moderators Mixed research syntheses combine other review approaches in the same paper == Process and product == Shields and Rangarajan (2013) distinguish between the process of reviewing the literature and a finished work or product known as a literature review. The process of reviewing the literature is often ongoing and informs many aspects of the empirical research project. The process of reviewing the literature requires different kinds of activities and ways of thinking. Shields and Rangarajan (2013) and Granello (2001) link the activities of doing a literature review with Benjamin Bloom's revised taxonomy of the cognitive domain (ways of thinking: remembering, understanding, applying, analyzing, evaluating, and creating). === Use of artificial intelligence in a literature review === Artificial intelligence (AI) is reshaping traditional literature reviews across various disciplines. Generative pre-trained transformers, such as ChatGPT, are often used by students and academics for review purposes. Since 2023, an increasing number of tools powered by large language models and other artificial intelligence technologies have been developed to assist, automate, or generate literature reviews. Nevertheless, the employment of ChatGPT in academic reviews is problematic due to ChatGPT's propensity to "hallucinate". In response, efforts are being made to mitigate these hallucinations through the integration of plugins. For instance, Rad et al. (2023) used ScholarAI for review in cardiothoracic surgery.
Holographic algorithm
In computer science, a holographic algorithm is an algorithm that uses a holographic reduction. A holographic reduction is a constant-time reduction that maps solution fragments many-to-many such that the sum of the solution fragments remains unchanged. These concepts were introduced by Leslie Valiant, who called them holographic because "their effect can be viewed as that of producing interference patterns among the solution fragments". The algorithms are unrelated to laser holography, except metaphorically. Their power comes from the mutual cancellation of many contributions to a sum, analogous to the interference patterns in a hologram. Holographic algorithms have been used to find polynomial-time solutions to problems without such previously known solutions for special cases of satisfiability, vertex cover, and other graph problems. They have received notable coverage due to speculation that they are relevant to the P versus NP problem and their impact on computational complexity theory. Although some of the general problems are #P-hard problems, the special cases solved are not themselves #P-hard, and thus do not prove FP = #P. Holographic algorithms have some similarities with quantum computation, but are completely classical. == Holant problems == Holographic algorithms exist in the context of Holant problems, which generalize counting constraint satisfaction problems (#CSP). A #CSP instance is a hypergraph G=(V,E) called the constraint graph. Each hyperedge represents a variable and each vertex v {\displaystyle v} is assigned a constraint f v . {\displaystyle f_{v}.} A vertex is connected to an hyperedge if the constraint on the vertex involves the variable on the hyperedge. The counting problem is to compute ∑ σ : E → { 0 , 1 } ∏ v ∈ V f v ( σ | E ( v ) ) , ( 1 ) {\displaystyle \sum _{\sigma :E\to \{0,1\}}\prod _{v\in V}f_{v}(\sigma |_{E(v)}),~~~~~~~~~~(1)} which is a sum over all variable assignments, the product of every constraint, where the inputs to the constraint f v {\displaystyle f_{v}} are the variables on the incident hyperedges of v {\displaystyle v} . A Holant problem is like a #CSP except the input must be a graph, not a hypergraph. Restricting the class of input graphs in this way is indeed a generalization. Given a #CSP instance, replace each hyperedge e of size s with a vertex v of degree s with edges incident to the vertices contained in e. The constraint on v is the equality function of arity s. This identifies all of the variables on the edges incident to v, which is the same effect as the single variable on the hyperedge e. In the context of Holant problems, the expression in (1) is called the Holant after a related exponential sum introduced by Valiant. == Holographic reduction == A standard technique in complexity theory is a many-one reduction, where an instance of one problem is reduced to an instance of another (hopefully simpler) problem. However, holographic reductions between two computational problems preserve the sum of solutions without necessarily preserving correspondences between solutions. For instance, the total number of solutions in both sets can be preserved, even though individual problems do not have matching solutions. The sum can also be weighted, rather than simply counting the number of solutions, using linear basis vectors. === General example === It is convenient to consider holographic reductions on bipartite graphs. A general graph can always be transformed it into a bipartite graph while preserving the Holant value. This is done by replacing each edge in the graph by a path of length 2, which is also known as the 2-stretch of the graph. To keep the same Holant value, each new vertex is assigned the binary equality constraint. Consider a bipartite graph G=(U,V,E) where the constraint assigned to every vertex u ∈ U {\displaystyle u\in U} is f u {\displaystyle f_{u}} and the constraint assigned to every vertex v ∈ V {\displaystyle v\in V} is f v {\displaystyle f_{v}} . Denote this counting problem by Holant ( G , f u , f v ) . {\displaystyle {\text{Holant}}(G,f_{u},f_{v}).} If the vertices in U are viewed as one large vertex of degree |E|, then the constraint of this vertex is the tensor product of f u {\displaystyle f_{u}} with itself |U| times, which is denoted by f u ⊗ | U | . {\displaystyle f_{u}^{\otimes |U|}.} Likewise, if the vertices in V are viewed as one large vertex of degree |E|, then the constraint of this vertex is f v ⊗ | V | . {\displaystyle f_{v}^{\otimes |V|}.} Let the constraint f u {\displaystyle f_{u}} be represented by its weighted truth table as a row vector and the constraint f v {\displaystyle f_{v}} be represented by its weighted truth table as a column vector. Then the Holant of this constraint graph is simply f u ⊗ | U | f v ⊗ | V | . {\displaystyle f_{u}^{\otimes |U|}f_{v}^{\otimes |V|}.} Now for any complex 2-by-2 invertible matrix T (the columns of which are the linear basis vectors mentioned above), there is a holographic reduction between Holant ( G , f u , f v ) {\displaystyle {\text{Holant}}(G,f_{u},f_{v})} and Holant ( G , f u T ⊗ ( deg u ) , ( T − 1 ) ⊗ ( deg v ) f v ) . {\displaystyle {\text{Holant}}(G,f_{u}T^{\otimes (\deg u)},(T^{-1})^{\otimes (\deg v)}f_{v}).} To see this, insert the identity matrix T ⊗ | E | ( T − 1 ) ⊗ | E | {\displaystyle T^{\otimes |E|}(T^{-1})^{\otimes |E|}} in between f u ⊗ | U | f v ⊗ | V | {\displaystyle f_{u}^{\otimes |U|}f_{v}^{\otimes |V|}} to get f u ⊗ | U | f v ⊗ | V | {\displaystyle f_{u}^{\otimes |U|}f_{v}^{\otimes |V|}} = f u ⊗ | U | T ⊗ | E | ( T − 1 ) ⊗ | E | f v ⊗ | V | {\displaystyle =f_{u}^{\otimes |U|}T^{\otimes |E|}(T^{-1})^{\otimes |E|}f_{v}^{\otimes |V|}} = ( f u T ⊗ ( deg u ) ) ⊗ | U | ( f v ( T − 1 ) ⊗ ( deg v ) ) ⊗ | V | . {\displaystyle =\left(f_{u}T^{\otimes (\deg u)}\right)^{\otimes |U|}\left(f_{v}(T^{-1})^{\otimes (\deg v)}\right)^{\otimes |V|}.} Thus, Holant ( G , f u , f v ) {\displaystyle {\text{Holant}}(G,f_{u},f_{v})} and Holant ( G , f u T ⊗ ( deg u ) , ( T − 1 ) ⊗ ( deg v ) f v ) {\displaystyle {\text{Holant}}(G,f_{u}T^{\otimes (\deg u)},(T^{-1})^{\otimes (\deg v)}f_{v})} have exactly the same Holant value for every constraint graph. They essentially define the same counting problem. === Specific examples === ==== Vertex covers and independent sets ==== Let G be a graph. There is a 1-to-1 correspondence between the vertex covers of G and the independent sets of G. For any set S of vertices of G, S is a vertex cover in G if and only if the complement of S is an independent set in G. Thus, the number of vertex covers in G is exactly the same as the number of independent sets in G. The equivalence of these two counting problems can also be proved using a holographic reduction. For simplicity, let G be a 3-regular graph. The 2-stretch of G gives a bipartite graph H=(U,V,E), where U corresponds to the edges in G and V corresponds to the vertices in G. The Holant problem that naturally corresponds to counting the number of vertex covers in G is Holant ( H , OR 2 , EQUAL 3 ) . {\displaystyle {\text{Holant}}(H,{\text{OR}}_{2},{\text{EQUAL}}_{3}).} The truth table of OR2 as a row vector is (0,1,1,1). The truth table of EQUAL3 as a column vector is ( 1 , 0 , 0 , 0 , 0 , 0 , 0 , 1 ) T = [ 1 0 ] ⊗ 3 + [ 0 1 ] ⊗ 3 {\displaystyle (1,0,0,0,0,0,0,1)^{T}={\begin{bmatrix}1\\0\end{bmatrix}}^{\otimes 3}+{\begin{bmatrix}0\\1\end{bmatrix}}^{\otimes 3}} . Then under a holographic transformation by [ 0 1 1 0 ] , {\displaystyle {\begin{bmatrix}0&1\\1&0\end{bmatrix}},} OR 2 ⊗ | U | EQUAL 3 ⊗ | V | {\displaystyle {\text{OR}}_{2}^{\otimes |U|}{\text{EQUAL}}_{3}^{\otimes |V|}} = ( 0 , 1 , 1 , 1 ) ⊗ | U | ( [ 1 0 ] ⊗ 3 + [ 0 1 ] ⊗ 3 ) ⊗ | V | {\displaystyle =(0,1,1,1)^{\otimes |U|}\left({\begin{bmatrix}1\\0\end{bmatrix}}^{\otimes 3}+{\begin{bmatrix}0\\1\end{bmatrix}}^{\otimes 3}\right)^{\otimes |V|}} = ( 0 , 1 , 1 , 1 ) ⊗ | U | [ 0 1 1 0 ] ⊗ | E | [ 0 1 1 0 ] ⊗ | E | ( [ 1 0 ] ⊗ 3 + [ 0 1 ] ⊗ 3 ) ⊗ | V | {\displaystyle =(0,1,1,1)^{\otimes |U|}{\begin{bmatrix}0&1\\1&0\end{bmatrix}}^{\otimes |E|}{\begin{bmatrix}0&1\\1&0\end{bmatrix}}^{\otimes |E|}\left({\begin{bmatrix}1\\0\end{bmatrix}}^{\otimes 3}+{\begin{bmatrix}0\\1\end{bmatrix}}^{\otimes 3}\right)^{\otimes |V|}} = ( ( 0 , 1 , 1 , 1 ) [ 0 1 1 0 ] ⊗ 2 ) ⊗ | U | ( ( [ 0 1 1 0 ] [ 1 0 ] ) ⊗ 3 + ( [ 0 1 1 0 ] [ 0 1 ] ) ⊗ 3 ) ⊗ | V | {\displaystyle =\left((0,1,1,1){\begin{bmatrix}0&1\\1&0\end{bmatrix}}^{\otimes 2}\right)^{\otimes |U|}\left(\left({\begin{bmatrix}0&1\\1&0\end{bmatrix}}{\begin{bmatrix}1\\0\end{bmatrix}}\right)^{\otimes 3}+\left({\begin{bmatrix}0&1\\1&0\end{bmatrix}}{\begin{bmatrix}0\\1\end{bmatrix}}\right)^{\otimes 3}\right)^{\otimes |V|}} = ( 1 , 1 , 1 , 0 ) ⊗ | U | ( [ 0 1 ] ⊗ 3 + [ 1 0 ] ⊗ 3 ) ⊗ | V | {\displaystyle =(1,1,1,0)^{\otimes |U|}\left({\begin{bmatrix}0\\1\end{bmatrix}}^{\otimes 3}+{\begin{bmatrix}1\\0\end{bmatrix}}^{\otimes 3}\right)^{\otimes |V|}} = NAND 2 ⊗ | U | EQUAL 3 ⊗ | V | , {\displaystyle ={\text{NAND}}_{2}^{\otim
Spatial computing
Spatial computing refers to 3D human–computer interaction techniques that are perceived by users as taking place in the real world, in and around their bodies and physical environments, instead of constrained to and perceptually behind computer screens or in purely virtual worlds. This concept inverts the long-standing practice of teaching people to interact with computers in digital environments, and instead teaches computers to better understand and interact with people more naturally in the human world. This concept overlaps with and encompasses others including extended reality, augmented reality, mixed reality, natural user interface, contextual computing, affective computing, and ubiquitous computing. The usage for labeling and discussing these adjacent technologies is imprecise. Spatial computing devices include sensors—such as RGB cameras, depth cameras, 3D trackers, inertial measurement units, or other tools—to sense and track nearby human bodies (including hands, arms, eyes, legs, mouths) during ordinary interactions with people and computers in a 3D space. They further use computer vision to attempt to understand real world scenes, such as rooms, streets or stores, to read labels, to recognize objects, create 3D maps, and more. Quite often they also use extended reality and mixed reality to superimpose virtual 3D graphics and virtual 3D audio onto the human visual and auditory system as a way of providing information more naturally and contextually than traditional 2D screens. Spatial computing often refers to personal computing devices like headsets and headphones, but other human-computer interactions that leverage real-time spatial positioning for displays, like projection mapping or cave automatic virtual environment displays, can also be considered spatial computing if they leverage human-computer input for the participants. == History == The term "spatial computing" apparently originated in the field of GIS around 1985 or earlier to describe computations on large-scale geospatial information. Early examples of spatial computing in GIS include ArcInfo and its iterations, initially released in 1981, a part of ArcGIS along with ArcEditor, which together provide mapping, analysis, editing, and geoprocessing for geodatabases. This is somewhat related to the modern use, but on the scale of continents, cities, and neighborhoods. Modern spatial computing is more centered on the human scale of interaction, around the size of a living room or smaller. But it is not limited to that scale in the aggregate. In the early 1990s, as field of virtual reality was beginning to be commercialized beyond academic and military labs, a startup called Worldesign in Seattle used the term Spatial Computing to describe the interaction between individual people and 3D spaces, operating more at the human end of the scale than previous GIS examples may have contemplated. The company built a CAVE-like environment it called the Virtual Environment Theater, whose 3D experience was of a virtual flyover of the Giza Plateau, circa 3000 BC. Robert Jacobson, CEO of Worldesign, attributes the origins of the term to experiments at the Human Interface Technology Lab, at the University of Washington, under the direction of Thomas A. Furness III. Jacobson was a co-founder of that lab before spinning off this early VR startup. In 1997, an academic publication by T. Caelli, Peng Lam, and H. Bunke called "Spatial Computing: Issues in Vision, Multimedia and Visualization Technologies" introduced the term more broadly for academic audiences, focusing on a variety of topics such as image processing, dead reckoning navigation, object recognition, and visualizing spatial data. The specific term "spatial computing" was later referenced again in 2003 by Simon Greenwold, as "human interaction with a machine in which the machine retains and manipulates referents to real objects and spaces". MIT Media Lab alumnus John Underkoffler gave a TED talk in 2010 giving a live demo of the multi-screen, multi-user spatial computing systems being developed by Oblong Industries, which sought to bring to life the futuristic interfaces conceptualized by Underkoffler in the films Minority Report and Iron Man. Google Earth, initially released by Keyhole Inc. in 2001 and re-released by Google in 2005 can be considered a capable GIS and includes advanced geospatial tools and capabilities. == Notable instances of the use of spatial computing == In 2019, Microsoft HoloLens released a video outlining Airbus' partnership with Microsoft Azure to utilize the latter's mixed reality services for streamlining and improving the aircraft design process, as well as reducing the error in development. Airbus utilized the HoloLens 2 to this end, and the executive vice president of engineering claimed that their design process' validation phases were "hugely accelerated by 80 percent", as well as "strongly believe[d]" that up to 30% improvements in their industrial tasks could be attained with the HoloLens 2. During the presentational video, Airbus cited the maturity of Microsoft Azure services as "key" for their usage of the HoloLens 2. Also in 2019, the U.S. army partnered with Microsoft to produce a HoloLens based Integrated Visual Augmentation System (IVAS) to enhance infantry members by giving troops various abilities, including but not limited to using holographs to train, projecting 3D maps into their vision, and seeing through smoke and corners. Microsoft received tens of thousands of hours of feedback for their systems by 2021. Sergeant Marc Krugh at the time claimed that Microsoft's partnership has already caused the army to rethink some of its troops' operation strategy. == Products == === Apple Vision Pro === Apple announced Apple Vision Pro, a device it markets as a "spatial computer", on June 5, 2023. It includes several features such as Spatial Audio, two 4K micro-OLED displays, the Apple R1 chip and eye tracking, and released in the United States on February 2, 2024. In announcing the platform, Apple invoked its history of popularizing 2D graphical user interfaces that supplanted prior human-computer interface mechanisms such as the command line. Apple suggests the introduction of spatial computing as a new category of interactive device, on the same level of importance as the introduction of the 2D GUI. Apple Vision Pro runs on a new operating system called visionOS, which combines eye tracking, gesture recognition, and voice input to enable immersive interaction without physical controllers. The platform is aimed at productivity, entertainment, collaboration, and enterprise use cases. === Magic Leap === Magic Leap had also previously used the term “spatial computing” to describe its own devices. Its first headset, the Magic Leap 1, was released on August 8, 2018. Magic Leap’s technology enables the display of content into the real world using an optical see-through head-mounted display, which projects an overlay of a virtual world into the user’s field of view. This allows for an experience where the physical and digital worlds are perceived simultaneously. === Microsoft Hololens === On February 24, 2019, Microsoft released the HoloLens 2, which includes mixed reality tools and can generate interactable, manipulatable holograms in 3D space. The holograms in question can be related to a physical object or completely independent and free-floating. The Azure Spatial Anchors cloud service was released simultaneously, which gives the holograms capability to persist across time and many individuals' devices. === Meta Quest === The Meta Quest 3, a mixed reality gaming headset that includes spatial audio, two color cameras, and grants the ability to interact with virtual characters released on October 9, 2023, at a notably cheaper price than the Apple Vision Pro, but with reduced capabilities. === Snap Spectacles === Spectacles (product) are augmented reality glasses developed by Snap Inc.. The latest generation includes a 46-degree stereoscopic display, adjustable tint, and Snapdragon processors. Spectacles allow users to interact with a collection of augmented reality experiences designed for education, entertainment, and utility. Currently, the device is in the hands of selected developers and creators, as part of an experimental AR ecosystem focused on creativity, use case exploration and expression.
Client honeypot
Honeypots are security devices whose value lie in being probed and compromised. Traditional honeypots are servers (or devices that expose server services) that wait passively to be attacked. Client Honeypots are active security devices in search of malicious servers that attack clients. The client honeypot poses as a client and interacts with the server to examine whether an attack has occurred. Often the focus of client honeypots is on web browsers, but any client that interacts with servers can be part of a client honeypot (for example ftp, email, ssh, etc.). There are several terms that are used to describe client honeypots. Besides client honeypot, which is the generic classification, honeyclient is the other term that is generally used and accepted. However, there is a subtlety here, as "honeyclient" is actually a homograph that could also refer to the first known open source client honeypot implementation (see below), although this should be clear from the context. == Architecture == A client honeypot is composed of three components. The first component, a queuer, is responsible for creating a list of servers for the client to visit. This list can be created, for example, through crawling. The second component is the client itself, which is able to make a requests to servers identified by the queuer. After the interaction with the server has taken place, the third component, an analysis engine, is responsible for determining whether an attack has taken place on the client honeypot. In addition to these components, client honeypots are usually equipped with some sort of containment strategy to prevent successful attacks from spreading beyond the client honeypot. This is usually achieved through the use of firewalls and virtual machine sandboxes. Analogous to traditional server honeypots, client honeypots are mainly classified by their interaction level: high or low; which denotes the level of functional interaction the server can utilize on the client honeypot. In addition to this there are also newly hybrid approaches which denotes the usage of both high and low interaction detection techniques. == High interaction == High interaction client honeypots are fully functional systems comparable to real systems with real clients. As such, no functional limitations (besides the containment strategy) exist on high interaction client honeypots. Attacks on high interaction client honeypots are detected via inspection of the state of the system after a server has been interacted with. The detection of changes to the client honeypot may indicate the occurrence of an attack against that has exploited a vulnerability of the client. An example of such a change is the presence of a new or altered file. High interaction client honeypots are very effective at detecting unknown attacks on clients. However, the tradeoff for this accuracy is a performance hit from the amount of system state that has to be monitored to make an attack assessment. Also, this detection mechanism is prone to various forms of evasion by the exploit. For example, an attack could delay the exploit from immediately triggering (time bombs) or could trigger upon a particular set of conditions or actions (logic bombs). Since no immediate, detectable state change occurred, the client honeypot is likely to incorrectly classify the server as safe even though it did successfully perform its attack on the client. Finally, if the client honeypots are running in virtual machines, then an exploit may try to detect the presence of the virtual environment and cease from triggering or behave differently. === Capture-HPC === Capture [1] is a high interaction client honeypot developed by researchers at Victoria University of Wellington, NZ. Capture differs from existing client honeypots in various ways. First, it is designed to be fast. State changes are being detected using an event based model allowing to react to state changes as they occur. Second, Capture is designed to be scalable. A central Capture server is able to control numerous clients across a network. Third, Capture is supposed to be a framework that allows to utilize different clients. The initial version of Capture supports Internet Explorer, but the current version supports all major browsers (Internet Explorer, Firefox, Opera, Safari) as well as other HTTP aware client applications, such as office applications and media players. === HoneyClient === HoneyClient [2] is a web browser based (IE/FireFox) high interaction client honeypot designed by Kathy Wang in 2004 and subsequently developed at MITRE. It was the first open source client honeypot and is a mix of Perl, C++, and Ruby. HoneyClient is state-based and detects attacks on Windows clients by monitoring files, process events, and registry entries. It has integrated the Capture-HPC real-time integrity checker to perform this detection. HoneyClient also contains a crawler, so it can be seeded with a list of initial URLs from which to start and can then continue to traverse web sites in search of client-side malware. === HoneyMonkey (dead since 2010) === HoneyMonkey [3] is a web browser based (IE) high interaction client honeypot implemented by Microsoft in 2005. It is not available for download. HoneyMonkey is state based and detects attacks on clients by monitoring files, registry, and processes. A unique characteristic of HoneyMonkey is its layered approach to interacting with servers in order to identify zero-day exploits. HoneyMonkey initially crawls the web with a vulnerable configuration. Once an attack has been identified, the server is reexamined with a fully patched configuration. If the attack is still detected, one can conclude that the attack utilizes an exploit for which no patch has been publicly released yet and therefore is quite dangerous. === SHELIA (dead since 2009) === Shelia [4] is a high interaction client honeypot developed by Joan Robert Rocaspana at Vrije Universiteit Amsterdam. It integrates with an email reader and processes each email it receives (URLs & attachments). Depending on the type of URL or attachment received, it opens a different client application (e.g. browser, office application, etc.) It monitors whether executable instructions are executed in data area of memory (which would indicate a buffer overflow exploit has been triggered). With such an approach, SHELIA is not only able to detect exploits, but is able to actually ward off exploits from triggering. === UW Spycrawler === The Spycrawler [5] developed at the University of Washington is yet another browser based (Mozilla) high interaction client honeypot developed by Moshchuk et al. in 2005. This client honeypot is not available for download. The Spycrawler is state based and detects attacks on clients by monitoring files, processes, registry, and browser crashes. Spycrawlers detection mechanism is event based. Further, it increases the passage of time of the virtual machine the Spycrawler is operating in to overcome (or rather reduce the impact of) time bombs. === Web Exploit Finder === WEF [6] is an implementation of an automatic drive-by-download – detection in a virtualized environment, developed by Thomas Müller, Benjamin Mack and Mehmet Arziman, three students from the Hochschule der Medien (HdM), Stuttgart during the summer term in 2006. WEF can be used as an active HoneyNet with a complete virtualization architecture underneath for rollbacks of compromised virtualized machines. == Low interaction == Low interaction client honeypots differ from high interaction client honeypots in that they do not utilize an entire real system, but rather use lightweight or simulated clients to interact with the server. (in the browser world, they are similar to web crawlers). Responses from servers are examined directly to assess whether an attack has taken place. This could be done, for example, by examining the response for the presence of malicious strings. Low interaction client honeypots are easier to deploy and operate than high interaction client honeypots and also perform better. However, they are likely to have a lower detection rate since attacks have to be known to the client honeypot in order for it to detect them; new attacks are likely to go unnoticed. They also suffer from the problem of evasion by exploits, which may be exacerbated due to their simplicity, thus making it easier for an exploit to detect the presence of the client honeypot. === HoneyC === HoneyC [7] is a low interaction client honeypot developed at Victoria University of Wellington by Christian Seifert in 2006. HoneyC is a platform independent open source framework written in Ruby. It currently concentrates driving a web browser simulator to interact with servers. Malicious servers are detected by statically examining the web server's response for malicious strings through the usage of Snort signatures. === Monkey-Spider (dead since 2008) === Monkey-Spider [8] is a low-interaction client honeypot i
Operational data store
An operational data store (ODS) is used for operational reporting and as a source of data for the enterprise data warehouse (EDW). It is a complementary element to an EDW in a decision support environment, and is used for operational reporting, controls, and decision making, as opposed to the EDW, which is used for tactical and strategic decision support. An ODS is a database designed to integrate data from multiple sources for additional operations on the data, for reporting, controls and operational decision support. Unlike a production master data store, the data is not passed back to operational systems. It may be passed for further operations and to the data warehouse for reporting. An ODS should not be confused with an enterprise data hub (EDH). An operational data store will take transactional data from one or more production systems and loosely integrate it, in some respects it is still subject oriented, integrated and time variant, but without the volatility constraints. This integration is mainly achieved through the use of EDW structures and content. An ODS is not an intrinsic part of an EDH solution, although an EDH may be used to subsume some of the processing performed by an ODS and the EDW. An EDH is a broker of data. An ODS is certainly not. Because the data originates from multiple sources, the integration often involves cleaning, resolving redundancy and checking against business rules for integrity. An ODS is usually designed to contain low-level or atomic (indivisible) data (such as transactions and prices) with limited history that is captured "real time" or "near real time" as opposed to the much greater volumes of data stored in the data warehouse generally on a less-frequent basis. == General use == The general purpose of an ODS is to integrate data from disparate source systems in a single structure, using data integration technologies like data virtualization, data federation, or extract, transform, and load (ETL). This will allow operational access to the data for operational reporting, master data or reference data management. An ODS is not a replacement or substitute for a data warehouse or for a data hub but in turn could become a source.