The Iris flower data set or Fisher's Iris data set is a multivariate data set used and made famous by the British statistician and biologist Ronald Fisher in his 1936 paper The use of multiple measurements in taxonomic problems as an example of linear discriminant analysis. It is sometimes called Anderson's Iris data set because Edgar Anderson collected the data to quantify the morphologic variation of Iris flowers of three related species. Two of the three species were collected in the Gaspé Peninsula "all from the same pasture, and picked on the same day and measured at the same time by the same person with the same apparatus". The data set consists of 50 samples from each of three species of Iris (Iris setosa, Iris virginica and Iris versicolor). Four features were measured from each sample: the length and the width of the sepals and petals, in centimeters. Based on the combination of these four features, Fisher developed a linear discriminant model to distinguish each species. Fisher's paper was published in the Annals of Eugenics (today the Annals of Human Genetics). == Use of the data set == Originally used as an example data set on which Fisher's linear discriminant analysis was applied, it became a typical test case for many statistical classification techniques in machine learning such as support vector machines. The use of this data set in cluster analysis however is not common, since the data set only contains two clusters with rather obvious separation. One of the clusters contains Iris setosa, while the other cluster contains both Iris virginica and Iris versicolor and is not separable without the species information Fisher used. This makes the data set a good example to explain the difference between supervised and unsupervised techniques in data mining: Fisher's linear discriminant model can only be obtained when the object species are known: class labels and clusters are not necessarily the same. Nevertheless, all three species of Iris are separable in the projection on the nonlinear and branching principal component. The data set is approximated by the closest tree with some penalty for the excessive number of nodes, bending and stretching. Then the so-called "metro map" is constructed. The data points are projected into the closest node. For each node the pie diagram of the projected points is prepared. The area of the pie is proportional to the number of the projected points. It is clear from the diagram (left) that the absolute majority of the samples of the different Iris species belong to the different nodes. Only a small fraction of Iris-virginica is mixed with Iris-versicolor (the mixed blue-green nodes in the diagram). Therefore, the three species of Iris (Iris setosa, Iris virginica and Iris versicolor) are separable by the unsupervising procedures of nonlinear principal component analysis. To discriminate them, it is sufficient just to select the corresponding nodes on the principal tree. == Data set == The data set contains a set of 150 records under five attributes: sepal length, sepal width, petal length, petal width and species. The iris data set is widely used as a beginner's data set for machine learning purposes. The data set is included in R base and Python in the machine learning library scikit-learn, so that users can access it without having to find a source for it. Several versions of the data set have been published. === R code illustrating usage === The example R code shown below reproduce the scatterplot displayed at the top of this article: === Python code illustrating usage === This code gives:
Computer appliance
A computer appliance is a computer system with a combination of hardware, software, or firmware that is specifically designed to provide a particular computing resource. Such devices became known as appliances because of the similarity in role or management to a home appliance, which are generally closed and sealed, and are not serviceable by the user or owner. The hardware and software are delivered as an integrated product and may even be pre-configured before delivery to a customer, to provide a turn-key solution for a particular application. Unlike general purpose computers, appliances are generally not designed to allow the customers to change the software and the underlying operating system, or to flexibly reconfigure the hardware. Another form of appliance is the virtual appliance, which has similar functionality to a dedicated hardware appliance, but is distributed as a software virtual machine image for a hypervisor-equipped device. == Overview == Traditionally, software applications run on top of a general-purpose operating system, which uses the hardware resources of the computer (primarily memory, disk storage, processing power, and networking bandwidth) to meet the computing needs of the user. The main issue with the traditional model is related to complexity. It is complex to integrate the operating system and applications with a hardware platform, and complex to support it afterwards. By tightly constraining the variations of the hardware and software, the appliance becomes easily deployable, and can be used without nearly as wide (or deep) IT knowledge. Additionally, when problems and errors appear, the supporting staff very rarely needs to explore them deeply to understand the matter thoroughly. The staff needs merely training on the appliance management software to be able to resolve most of problems. In all forms of the computer appliance model, customers benefit from easy operations. The appliance has exactly one combination of hardware and operating system and application software, which has been pre-installed at the factory. This prevents customers from needing to perform complex integration work, and dramatically simplifies troubleshooting. In fact, this "turnkey operation" characteristic is the driving benefit that customers seek when purchasing appliances. To be considered an appliance, the (hardware) device needs to be integrated with software, and both are supplied as a package. This distinguishes appliances from "home grown" solutions, or solutions requiring complex implementations by integrators or value-added resellers (VARs). The appliance approach helps to decouple the various systems and applications, for example in the data center. Once a resource is decoupled, in theory it can be also centralized to become shared among many systems, centrally managed and optimized, all without requiring changes to any other system. == Tradeoffs of the computer appliance approach == The major disadvantage of deploying a computer appliance is that since they are designed to supply a specific resource, they most often include a customized operating system running over specialized hardware, neither of which are likely to be compatible with the other systems previously deployed. Customers lose flexibility. One may believe that a proprietary embedded operating system, or operating system within an application, can make the appliance much more secure from common cyber attacks. However, the opposite is true. Security by obscurity is a poor security decision, and appliances are often plagued by security issues as evidenced by the proliferation of IoT devices. == Types of appliances == The variety of computer appliances reflects the wide range of computing resources they provide to applications. Some examples: Storage appliances provide large amounts of storage, often available to many machines on the network. See Network-attached storage and Storage area network. Network appliances are general purpose routers which may also provide firewall protection, Transport Layer Security (TLS), messaging, access to specialized networking protocols (like the ebXML Message Service) and bandwidth multiplexing for the multiple systems they front-end. Backup and disaster recovery appliances computer appliances that are integrated backup software and backup targets, sometimes with hypervisors to support local DR of protected servers. They are often a gateway to a full DRaaS solution. Firewall and Security appliances Dedicated network appliances that are designed to protect computer networks from unwanted traffic. IIoT and MES Gateway appliances Computer appliances that are designed to translate data bidirectionally between control systems and enterprise systems. Proprietary, embedded, firmware applications running on the appliance use point-to-point connections to translate data between field devices in their native automation protocols and MES systems through their APIs, ODBC, or RESTful interfaces. Anti-spam appliances for e-mail spam Software appliances A single application server appliance, with just enough operating system (JeOS) for it to run. Virtual machine appliances consist of a "hypervisor style" embedded operating system running on appliance hardware. The hypervisor layer is matched to the hardware of the appliance, and cannot be varied by the customer, but the customer may load other operating systems and applications onto the appliance in the form of virtual machines. == Consumer appliances == Aside from its deployment within data centers, many computer appliances are directly used by the general public. These include: Digital video recorder Residential gateway Network-attached storage (NAS) Video game console Consumer uses stress the need for an appliance to have easy installation, configuration, and operation, with little or no technical knowledge being necessary. == Appliances in industrial automation == The world of industrial automation has been rich in appliances. These appliances have been hardened to withstand temperature and vibration extremes. These appliances are also highly configurable, enabling customization to meet a wide variety of applications. The key benefits of an appliance in automation are: Reduced downtime - a failed appliance is typically replaced with a COTS replacement and its task is quickly and easily reloaded from a backup. Highly scalable - appliances are typically targeted solutions for an area of a plant or process. As the requirements change, scalability is achieved through the installation of another appliance. Automation concepts are easily replicated throughout the enterprise by standardizing on appliances to perform the needed tasks, as opposed to the development of custom automation schemes for each task. Low TCO (total cost of ownership) - appliances are developed, tested and supported by automation product vendors and undergo a much broader level of quality testing than custom designed automation solutions. The use of appliances in automation reduce the level of testing needed in each individual application. Reduced design time - appliances perform specific functions and although they are highly configurable, they are typically self documenting. This enables appliance based solutions to be transferred from engineer to engineer with minimal need for training and documentation. Types of automation appliances: PLC (programmable logic controller) - Programmable logic controllers are appliances that are typically used for discrete control and offer a wide range of Input and Output options. They are configured through standardized programming languages such as IEC-1131. PID (proportional–integral–derivative controller) - PID controllers are appliances that monitor a process variable and, based on an error term, effect change on a control output (manipulated variable) to drive the process variable to a setpoint. PAC (programmable automation controller) - Programmable automation controllers are appliances that embody properties of both PLCs and PID controllers enabling the integration of both analog and discrete control. Universal gateway - A universal gateway appliance has the ability to communicate with a variety of devices through their respective communication protocols, and will affect data transactions between them. This in increasingly important as manufacturing strives to improve agility, quality, production rates, production costs and reduce downtime through enhanced M2M (machine to machine) communications. EATMs (Enterprise Appliance Transaction Modules) - Enterprise appliance transaction modules are appliances that affect data transactions from plant floor automation systems to enterprise business systems. They communicate to plant floor equipment through various vendor automation protocols, and communicate to business systems through database communication protocols such as JMS (Java Message Service) and SQL (Structured Query Language). == Internal structure == There are several
Application permissions
Permissions are a means of controlling and regulating access to specific system- and device-level functions by software. Typically, types of permissions cover functions that may have privacy implications, such as the ability to access a device's hardware features (including the camera and microphone), and personal data (such as storage devices, contacts lists, and the user's present geographical location). Permissions are typically declared in an application's manifest, and certain permissions must be specifically granted at runtime by the user—who may revoke the permission at any time. Permission systems are common on mobile operating systems, where permissions needed by specific apps must be disclosed via the platform's app store. == Mobile devices == On mobile operating systems for smartphones and tablets, typical types of permissions regulate: Access to storage and personal information, such as contacts, calendar appointments, etc. Location tracking. Access to the device's internal camera and/or microphone. Access to biometric sensors, including fingerprint readers and other health sensors.. Internet access. Access to communications interfaces (including their hardware identifiers and signal strength where applicable, and requests to enable them), such as Bluetooth, Wi-Fi, NFC, and others. Making and receiving phone calls. Sending and reading text messages The ability to perform in-app purchases. The ability to "overlay" themselves within other apps. Installing, deleting and otherwise managing applications. Authentication tokens (e.g., OAuth tokens) from web services stored in system storage for sharing between apps. Prior to Android 6.0 "Marshmallow", permissions were automatically granted to apps at runtime, and they were presented upon installation in Google Play Store. Since Marshmallow, certain permissions now require the app to request permission at runtime by the user. These permissions may also be revoked at any time via Android's settings menu. Usage of permissions on Android are sometimes abused by app developers to gather personal information and deliver advertising; in particular, apps for using a phone's camera flash as a flashlight (which have grown largely redundant due to the integration of such functionality at the system level on later versions of Android) have been known to require a large array of unnecessary permissions beyond what is actually needed for the stated functionality. iOS imposes a similar requirement for permissions to be granted at runtime, with particular controls offered for enabling of Bluetooth, Wi-Fi, and location tracking. == WebPermissions == WebPermissions is a permission system for web browsers. When a web application needs some data behind permission, it must request it first. When it does it, a user sees a window asking him to make a choice. The choice is remembered, but can be cleared lately. Currently the following resources are controlled: geolocation desktop notifications service workers sensors audio capturing devices, like sound cards, and their model names and characteristics video capturing devices, like cameras, and their identifiers and characteristics == Analysis == The permission-based access control model assigns access privileges for certain data objects to application. This is a derivative of the discretionary access control model. The access permissions are usually granted in the context of a specific user on a specific device. Permissions are granted permanently with few automatic restrictions. In some cases permissions are implemented in 'all-or-nothing' approach: a user either has to grant all the required permissions to access the application or the user can not access the application. There is still a lack of transparency when the permission is used by a program or application to access the data protected by the permission access control mechanism. Even if a user can revoke a permission, the app can blackmail a user by refusing to operate, for example by just crashing or asking user to grant the permission again in order to access the application. The permission mechanism has been widely criticized by researchers for several reasons, including; Intransparency of personal data extraction and surveillance, including the creation of a false sense of security; End-user fatigue of micro-managing access permissions leading to a fatalistic acceptance of surveillance and intransparency; Massive data extraction and personal surveillance carried out once the permissions are granted. Some apps, such as XPrivacy and Mockdroid spoof data in order to act as a measure for privacy. Further transparency methods include longitudinal behavioural profiling and multiple-source privacy analysis of app data access.
IruSoft
IruSoft (Arabic: آيروسوفت) is an insurance regulatory platform designated for licensing, supervision and inspection of the insurance sector within a country. The platform introduced unique supervision-technology (suptech), insurance-technology (insurtech) and regulatory-technology (regtech) automated modules by which a regulator requires less resources to ensure fairness, transparency and competition and to prevent conflicts of interest in the sector. IruSoft was founded by Abdullah Al-Salloum and owned by the Insurance Regulatory Unit in Kuwait. The Insurance Regulatory Unit optimized processing insurance-sector's customer complaints by issuing Resolution No. (1) of 2022 that introduced IruSoft's complaints public module; an automated resolution center, by which the process of receiving submitted complaints, passing them on to the platforms of licensed insurance companies, tracking matter-related discussions and updates and getting them escalated if unresolved to be discussed by a committee assigned by the unit is integrally automated and analyzed for better key performance indicators.
Statistical shape analysis
Statistical shape analysis is an analysis of the geometrical properties of some given set of shapes by statistical methods. For instance, it could be used to quantify differences between male and female gorilla skull shapes, normal and pathological bone shapes, leaf outlines with and without herbivory by insects, etc. Important aspects of shape analysis are to obtain a measure of distance between shapes, to estimate mean shapes from (possibly random) samples, to estimate shape variability within samples, to perform clustering and to test for differences between shapes. One of the main methods used is principal component analysis (PCA). Statistical shape analysis has applications in various fields, including medical imaging, computer vision, computational anatomy, sensor measurement, and geographical profiling. == Landmark-based techniques == In the point distribution model, a shape is determined by a finite set of coordinate points, known as landmark points. These landmark points often correspond to important identifiable features such as the corners of the eyes. Once the points are collected some form of registration is undertaken. This can be a baseline methods used by Fred Bookstein for geometric morphometrics in anthropology. Or an approach like Procrustes analysis which finds an average shape. David George Kendall investigated the statistical distribution of the shape of triangles, and represented each triangle by a point on a sphere. He used this distribution on the sphere to investigate ley lines and whether three stones were more likely to be co-linear than might be expected. Statistical distribution like the Kent distribution can be used to analyse the distribution of such spaces. Alternatively, shapes can be represented by curves or surfaces representing their contours, by the spatial region they occupy. == Shape deformations == Differences between shapes can be quantified by investigating deformations transforming one shape into another. In particular a diffeomorphism preserves smoothness in the deformation. This was pioneered in D'Arcy Thompson's On Growth and Form before the advent of computers. Deformations can be interpreted as resulting from a force applied to the shape. Mathematically, a deformation is defined as a mapping from a shape x to a shape y by a transformation function Φ {\displaystyle \Phi } , i.e., y = Φ ( x ) {\displaystyle y=\Phi (x)} . Given a notion of size of deformations, the distance between two shapes can be defined as the size of the smallest deformation between these shapes. Diffeomorphometry is the focus on comparison of shapes and forms with a metric structure based on diffeomorphisms, and is central to the field of Computational anatomy. Diffeomorphic registration, introduced in the 90's, is now an important player with existing codes bases organized around ANTS, DARTEL, DEMONS, LDDMM, StationaryLDDMM, and FastLDDMM are examples of actively used computational codes for constructing correspondences between coordinate systems based on sparse features and dense images. Voxel-based morphometry (VBM) is an important technology built on many of these principles. Methods based on diffeomorphic flows are also used. For example, deformations could be diffeomorphisms of the ambient space, resulting in the LDDMM (Large Deformation Diffeomorphic Metric Mapping) framework for shape comparison.
WhatsApp Messenger, commonly known simply as WhatsApp, is an American social media, instant messaging (IM), and Voice over IP (VoIP) service accessible via desktop and mobile app. Owned by Meta Platforms, the service allows users to send text messages, voice messages, and video messages, make voice and video calls, and share images, documents, user locations, and other content. The service requires a cellular mobile telephone number to register. WhatsApp was launched in May 2009. In January 2018, WhatsApp released a standalone business app called WhatsApp Business which can communicate with the standard WhatsApp client. As of May 2025, the service had 3 billion monthly active users, making it the most used messenger app. The name of the app is meant to sound like "what's up". The service was created by WhatsApp Inc. of Mountain View, California, which was acquired by Facebook in February 2014 for approximately US$19.3 billion. It became the world's most popular messaging application in 2015, with 900 million users, and had more than 2 billion active users worldwide in February 2020. WhatsApp Business had approximately 200 million monthly users in 2023. By 2016, it had become the primary means of Internet communication in regions including the Americas, the Indian subcontinent, and large parts of Europe and Africa. == History == === 2009–2014 === WhatsApp was founded by Brian Acton and Jan Koum, former employees of Yahoo. Koum incorporated WhatsApp Inc. in California on February 24, 2009. A month earlier, Koum had purchased an iPhone, and he and Acton decided to create an app for the App Store. The idea started off as an app that would display statuses in a phone's Contacts menu, showing if a person was at work or on a call. Their discussions often took place at the home of Koum's Russian friend Alex Fishman in West San Jose. They realized that to take the idea further, they would need an iPhone developer. Fishman visited RentACoder.com, found Russian developer Igor Solomennikov, and introduced him to Koum. Koum named the app WhatsApp to sound like "what's up" and it was published on the Apple App Store and BlackBerry App World in May and June 2009 respectively. However, when early versions of WhatsApp kept crashing, Koum considered giving up and looking for a new job. Acton encouraged him to wait for a "few more months". In June 2009, when the app had been downloaded by only a handful of Fishman's Russian-speaking friends, Apple launched push technology, allowing users to be pinged even when not using the app. Koum updated WhatsApp so that everyone in the user's network would be notified when a user's status changed. This new facility, to Koum's surprise, was used by users to ping "each other with jokey custom statuses like, 'I woke up late' or 'I'm on my way.'" Fishman said, "At some point it sort of became instant messaging". WhatsApp 2.0, released for iPhone in August 2009, featured a purpose-designed messaging component; the number of active users suddenly increased to 250,000. Although Acton was working on another startup idea, he decided to join the company. In October 2009, Acton persuaded five former friends at Yahoo! to invest $250,000 in seed funding, and Acton became a co-founder and was given a stake. He officially joined WhatsApp on November 1. Koum then hired a friend in Los Angeles, Chris Peiffer, to develop a BlackBerry version, which arrived two months later. Subsequently, WhatsApp for Symbian OS was added in May 2010, and for Android OS in August 2010. In 2010 Google made multiple acquisition offers for WhatsApp, which were all declined. To cover the cost of sending verification texts to users, WhatsApp was changed from a free service to a paid one. In December 2009, the ability to send photos was added to the iOS version. By early 2011, WhatsApp was one of the top 20 apps in the U.S. Apple App Store. In April 2011, Sequoia Capital invested about $8 million for more than 15% of the company, after months of negotiation by Sequoia partner Jim Goetz. By February 2013, WhatsApp had about 200 million active users and 50 staff members. Sequoia invested another $50 million at a $1.5 billion valuation. Some time in 2013 WhatsApp acquired Santa Clara–based startup SkyMobius, the developers of Vtok, a video and voice calling app. As of December 2013, the service had 400 million monthly active users. That year, the company had $148 million in expenses and a net loss of $138 million. === 2014–2015 === On February 19, 2014, one year after the venture capital financing round at a $1.5 billion valuation, Facebook, Inc. (now Meta Platforms) agreed to acquire the company for US$19 billion, its largest acquisition to date. At the time, it was the largest acquisition of a venture-capital-backed company in history. Sequoia Capital received an approximate 5,000% return on its initial investment. Facebook paid $4 billion in cash, $12 billion in Facebook shares, and an additional $3 billion in restricted stock units granted to WhatsApp's founders Koum and Acton. Employee stock was scheduled to vest over four years subsequent to closing. Days after the announcement, WhatsApp users experienced a loss of service, leading to anger across social media. The acquisition was influenced by the data provided by Onavo, Facebook's research app for monitoring competitors and trending usage of social activities on mobile phones, as well as startups that were performing "unusually well". The acquisition caused many users to try, or move to, other message services. Telegram claimed that it acquired 8 million new users, and Line, 2 million. At a keynote presentation at the Mobile World Congress in Barcelona in February 2014, Facebook CEO Mark Zuckerberg said that Facebook's acquisition of WhatsApp was closely related to the Internet.org vision. A TechCrunch article said about Zuckerberg's vision:The idea, he said, is to develop a group of basic internet services that would be free of charge to use – "a 911 for the internet". These could be a social networking service like Facebook, a messaging service, maybe search and other things like weather. Providing a bundle of these free of charge to users will work like a gateway drug of sorts – users who may be able to afford data services and phones these days just don't see the point of why they would pay for those data services. This would give them some context for why they are important, and that will lead them to pay for more services like this – or so the hope goes. Three days after announcing the Facebook purchase, Koum said they were working to introduce voice calls. He also said that new mobile phones would be sold in Germany with the WhatsApp brand, and that their ultimate goal was to be on all smartphones. In August 2014, WhatsApp was the most popular messaging app in the world, with more than 600 million users. By early January 2015, WhatsApp had 700 million monthly users and over 30 billion messages every day. In April 2015, Forbes predicted that between 2012 and 2018, the telecommunications industry would lose $386 billion because of "over-the-top" services like WhatsApp and Skype. That month, WhatsApp had over 800 million users. By September 2015, it had grown to 900 million; and by February 2016, one billion. On November 30, 2015, the Android WhatsApp client made links to Telegram unclickable and not copyable. Multiple sources confirmed that it was intentional, not a bug, and that it had been implemented when the Android source code that recognized Telegram URLs had been identified. (The word "telegram" appeared in WhatsApp's code.) Some considered it an anti-competitive measure; WhatsApp offered no explanation. === 2016–2019 === On January 18, 2016, WhatsApp's co-founder Jan Koum announced that it would no longer charge users a $1 annual subscription fee, in an effort to remove a barrier faced by users without payment cards. He also said that the app would not display any third-party ads, and that it would have new features such as the ability to communicate with businesses. On May 18, 2017, the European Commission announced that it was fining Facebook €110 million for "providing misleading information about WhatsApp takeover" in 2014. The Commission said that in 2014 when Facebook acquired the messaging app, it "falsely claimed it was technically impossible to automatically combine user information from Facebook and WhatsApp." However, in the summer of 2016, WhatsApp had begun sharing user information with its parent company, allowing information such as phone numbers to be used for targeted Facebook advertisements. Facebook acknowledged the breach, but said the errors in their 2014 filings were "not intentional". In September 2017, WhatsApp's co-founder Brian Acton left the company to start a nonprofit group, later revealed as the Signal Foundation, which developed the WhatsApp competitor Signal. He explained his reasons for leaving in an interview with Forbes a year later. WhatsApp also
Airfair
AirFair was a mobile travel application that checks flights, and shows whether a traveler is owed compensation. == History == AirFair was developed in 2016 by Allay Logic Ltd; a Newcastle-based tech-company. == Services == AirFair offered a free flight check to see if compensation is owed. The app could indicate how much the person is owed within minutes whether the flight was delayed, cancelled or the traveler is refused boarding.