Oracle Cloud Platform refers to a Platform as a Service (PaaS) offerings by Oracle Corporation as part of Oracle Cloud Infrastructure. These offerings are used to build, deploy, integrate and extend applications in the cloud. The offerings support a variety of programming languages, databases, tools and frameworks including Oracle-specific, open source and third-party software and systems. == Deployment models == Oracle Cloud Platform offers public, private and hybrid cloud deployment models. == Architecture == Oracle Cloud Platform provides both Infrastructure as a Service (IaaS) and Platform as a Service (PaaS). The infrastructure is offered through a global network of Oracle managed data centers. Oracle deploys their cloud in Regions. Inside each Region are at least three fault-independent Availability Domains. Each of these Availability Domains contains an independent data center with power, thermal and network isolation. Oracle Cloud is generally available in North America, EMEA, APAC and Japan with announced South America and US Govt. regions coming soon.
Teleradiology
Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.
Nagarik App
Nagarik App (translation: Citizen App) is a mobile application launched by the Government of Nepal to provide government-related services in a single online platform. The app was developed to facilitate an easier, systematic, and simplified delivery of government services to Nepali citizens digitally. The app was launched to play a pivotal role in revolutionizing the way citizens interact with the government. It offers government services through a single unified platform, minimizing the need for citizens to navigate multiple channels or physical offices for their diverse needs of government services. The services are added gradually according to the needs and services required. The government aims to reduce the physical queues and the need to be physically present to get services from the different government offices. One can get services online round-the-clock even during holidays. As of now, 25 services are included in the app, ranging from Police Clearance Report to Voters Card. The app contains and provides a vast range of government services. The app was launched on the occasion of the fourth National Information and Communication Technology Day, 2021 (2078 BS). The event marked a significant milestone in Nepal’s digital transformation journey. It aims to reduce all the bureaucratic hurdles that the citizens have been facing and make government services more efficient and convenient. In Oct 20, 2024, a E-Chalan was introduced for managing traffic violations in initially piloting in Kathmandu Valley. The Kathmandu Valley Traffic Police Office announced that physical licenses would no longer be confiscated for traffic rule violations. Instead, a "Digital Chit (E-Chalan)" system was implemented, allowing drivers to pay fines electronically. Integrated with the NagarikApp, the system enables police to access drivers' licenses, record violations, and update details directly in the app. == Features and Services == Inland Revenue Department (Nepal) PAN Registration Election Commission (Nepal) Voter Card Pre-Registration and Details Nepal Police Online Clearance Report Traffic Violations and Fine Payment Nepal Passport, Driving License, National Identity Card (NID), Citizenship, and Voter ID link details My Municipality (Includes contact info of the representatives, services such as ambulance, nearby police, and budget programs and plans) The Government Press ID card PF/PAN/SST/CIT statements can be viewed Nagarik Pahichan Dwar (Online bank accounts can be opened and KYC can be verified for selected banks using the QR) == Awards and honors == Each year, World Summit Award honors outstanding digital applications and solutions across various categories. The winners of the World Summit Award represent the pinnacle of innovation in their respective categories. Nagarik App was selected among 180 participants and won the World Summit Award of 2022 in Government and Citizen Engagement category. == Latest Statistics & Usage Trends (2082 BS / 2025 AD) == As of August 2025, over 1.5 million Nepali citizens have registered and actively use the Nagarik App, according to the National Information Technology Center (NITC). The majority of daily logins come from: Kathmandu Valley – 37% of total users Province 1 (Koshi) – 19% of total users Bagmati Province – 15% of total users On average, 45,000+ transactions (service requests, document verifications, and payments) are processed through the app each day. The most-used services include: PAN Card Registration – 28% of total requests Police Clearance Report – 22% Driving License Linking & E-Chalan Payment – 18% Vehicle Tax Payment – 14% Source: Internal report from NITC, July 2025 == Step-by-Step: How to Link Your Driving License with Nagarik App == Update the App – Install the latest version from Play Store or App Store. Login or Register – Ensure your SIM is registered in your own name. Go to “Transport Services” in the menu. Select “Driving License” – Enter your license number and date of birth. Verify via OTP – Sent to your registered mobile number. Confirmation – Your digital license will appear inside the app. This guide is continuously updated to reflect the latest rules from the Kathmandu Valley Traffic Police Office and changes in NITC’s backend system. For in-depth details, step-by-step tutorials, and the most recent Nagarik App updates, visit the full article on The Bipin Blog.
Display list
A display list, also called a command list in Direct3D 12 and a command buffer in Vulkan, is a series of graphics commands or instructions that are run when the list is executed. Systems that make use of display list functionality are called retained mode systems, while systems that do not are as opposed to immediate mode systems. In OpenGL, display lists are useful to redraw the same geometry or apply a set of state changes multiple times. This benefit is also used with Direct3D 12's bundle command lists. In Direct3D 12 and Vulkan, display lists are regularly used for per-frame recording and execution. == Origins in vector displays == The vector monitors or calligraphic displays of the 1960s and 1970s used electron beam deflection to draw line segments, points, and sometimes curves directly on a CRT screen. Because the image would immediately fade, it needed to be redrawn many times a second (storage tube CRTs retained the image until blanked, but they were unsuitable for interactive graphics). To refresh the display, a dedicated CPU called a Display Processor or Display Processing Unit (DPU) was used, which had a memory buffer for a "display list", "display file", or "display program" containing line segment coordinates and other information. Advanced Display Processors also supported control flow instructions, which were useful for drawing repetitive graphics such as text, and some could perform coordinate transformations such as 3D projection. == Home computer display list functionality == One of the earliest systems with a true display list was the Atari 8-bit computers. The display list (actually called so in Atari terminology) is a series of instructions for ANTIC, the video co-processor used in these machines. This program, stored in the computer's memory and executed by ANTIC in real-time, can specify blank lines, any of six text modes and eight graphics modes, which sections of the screen can be horizontally or vertically fine-scrolled, and trigger Display List Interrupts (called raster interrupts or HBI on other systems). The Amstrad PCW family contains a Display List function called the 'Roller RAM'. This is a 512-byte RAM area consisting of 256 16-bit pointers in RAM, one for each line of the 720 × 256 pixel display. Each pointer identifies the location of 90 bytes of monochrome pixels that hold the line's 720 pixel states. The 90 bytes of 8 pixel states are spaced at 8-byte intervals, so there are 7 unused bytes between each byte of pixel data. This suits how the text-orientated PCW constructs a typical screen buffer in RAM, where the first character's 8 rows are stored in the first 8 bytes, the second character's rows in the next 8 bytes, and so on. The Roller RAM was implemented to speed up display scrolling as it would have been unacceptably slow for its 3.4 MHz Z80 to move up the 23 KB display buffer 'by hand' i.e. in software. The Roller RAM starting entry used at the beginning of a screen refresh is controlled by a Z80-writable I/O register. Therefore, the screen can be scrolled simply by changing this I/O register. Another system using a Display List-like feature in hardware is the Amiga, which, not coincidentally, was also designed by some of the same people who developed the custom hardware for the Atari 8-bit computers. Once directed to produce a display mode, it would continue to do so automatically for every following scan line. The computer also included a dedicated co-processor, called "Copper", which ran a simple program or 'Copper List' intended for modifying hardware registers in sync with the display. The Copper List instructions could direct the Copper to wait for the display to reach a specific position on the screen, and then change the contents of hardware registers. In effect, it was a processor dedicated to servicing raster interrupts. The Copper was used by Workbench to mix multiple display modes (multiple resolutions and color palettes on the monitor at the same time), and by numerous programs to create rainbow and gradient effects on the screen. The Amiga Copper was also capable of reconfiguring the sprite engine mid-frame, with only one scanline of delay. This allowed the Amiga to draw more than its 8 hardware sprites, so long as the additional sprites did not share scanlines (or the one scanline gap) with more than 7 other sprites. i.e., so long as at least one sprite had finished drawing, another sprite could be added below it on the screen. Additionally, the later 32-bit AGA chipset allowed the drawing of bigger sprites (more pixels per row) while retaining the same multiplexing. The Amiga also had dedicated block-shifter ("blitter") hardware, which could draw larger objects into a framebuffer. This was often used in place of, or in addition to, sprites. In more primitive systems, the results of a display list can be simulated, though at the cost of CPU-intensive writes to certain display modes, color control, or other visual effect registers in the video device, rather than a series of rendering commands executed by the device. Thus, one must create the displayed image using some other rendering process, either before or while the CPU-driven display generation executes. In many cases, the image is also modified or re-rendered between frames. The image is then displayed in various ways, depending on the exact way in which the CPU-driven display code is implemented. Examples of the results possible on these older machines requiring CPU-driven video include effects such as Commodore 64/128's FLI mode, or Rainbow Processing on the ZX Spectrum. == Usage in OpenGL == To delimit a display list, the glNewList and glEndList functions are used, and to execute the list, the glCallList function is used. Almost all rendering commands that occur between the function calls are stored in the display list. Commands that affect the client state are not stored in display lists. Display lists are named with an integer value, and creating a display list with the same name as one already created overrides the first. The glNewList function expects two arguments: an integer representing the name of the list, and an enumeration for the compilation mode. The two modes include GL_COMPILE_AND_EXECUTE, which compiles and immediately executes, and GL_COMPILE, which only compiles the list. Display lists enable the use of the retained mode rendering pattern, which is a system in which graphics commands are recorded (retained) to execute in succession at a later time. This is contrary to immediate mode, where graphics commands are immediately executed on client calls. == Usage in Direct3D 12 == Command lists are created using the ID3D12Device::CreateCommandList function. Command lists may be created in several types: direct, bundle, compute, copy, video decode, video process, and video encoding. Direct command lists specify that a command list the GPU can execute, and doesn't inherit any GPU state. Bundles, are best used for storing and executing small sets of commands any number of times. This is used differently than regular command lists, where commands stored in a command list are typically executed only once. Compute command lists are used for general computations, with a common use being calculating mipmaps. A copy command list is strictly for copying and the video decode and video process command lists are for video decoding and processing respectively. Upon creation, command lists are in the recording state. Command lists may be re-used by calling the ID3D12GraphicsCommandList::Reset function. After recording commands, the command list must be transitioned out of the recording state by calling ID3D12GraphicsCommandList::Close. The command list is then executed by calling ID3D12CommandQueue::ExecuteCommandLists.
Digital video effect
Digital video effects (DVEs) are visual effects that provide comprehensive live video image manipulation, in the same form as optical printer effects in film. DVEs differ from standard video switcher effects (often referred to as analog effects) such as wipes or dissolves, in that they deal primarily with resizing, distortion or movement of the image. Modern video switchers often contain internal DVE functionality. Modern DVE devices are incorporated in high-end broadcast video switchers. Early examples of DVE devices found in the broadcast post-production industry include the Ampex Digital Optics (ADO), Quantel DPE-5000, Vital Squeezoom, NEC E-Flex and the Abekas A5x series of DVEs. By 1988, Grass Valley Group caught up with the competition with their Kaleidoscope, which integrated ADO-type effects with their widely used line of broadcast switching gear. DVEs are used by the broadcast television industry in live television production environments like television studios and outside broadcasts. They are commonly used in video post-production.
Charge-coupled device
A charge-coupled device (CCD) is an integrated circuit containing an array of linked, or coupled, capacitors. Under the control of an external circuit, each capacitor can transfer its electric charge to a neighboring capacitor. CCD sensors are a major technology used in digital imaging. In a CCD image sensor, pixels are represented by p-doped metal–oxide–semiconductor (MOS) capacitors. These MOS capacitors, the basic building blocks of a CCD, are biased above the threshold for inversion when image acquisition begins, allowing the conversion of incoming photons into electron charges at the semiconductor-oxide interface; the CCD is then used to read out these charges. Although CCDs are not the only technology to allow for light detection, CCD image sensors are widely used in professional, medical, and scientific applications where high-quality image data are required. In applications with less exacting quality demands, such as consumer and professional digital cameras, active pixel sensors, also known as CMOS sensors (complementary MOS sensors), are generally used. However, the large quality advantage CCDs enjoyed early on has narrowed over time and since the late 2010s CMOS sensors are the dominant technology, having largely if not completely replaced CCD image sensors. == History == The basis for the CCD is the metal–oxide–semiconductor (MOS) structure, with MOS capacitors being the basic building blocks of a CCD, and a depleted MOS structure used as the photodetector in early CCD devices. In the late 1960s, Willard Boyle and George E. Smith at Bell Labs were researching MOS technology while working on semiconductor bubble memory. They realized that an electric charge was the analog of the magnetic bubble and that it could be stored on a tiny MOS capacitor. As it was fairly straightforward to fabricate a series of MOS capacitors in a row, they connected a suitable voltage to them so that the charge could be stepped along from one to the next. This led to the invention of the charge-coupled device by Boyle and Smith in 1969. They conceived of the design of what they termed, in their notebook, "Charge 'Bubble' Devices". The initial paper describing the concept in April 1970 listed possible uses as memory, a delay line, and an imaging device. The device could also be used as a shift register. The essence of the design was the ability to transfer charge along the surface of a semiconductor from one storage capacitor to the next. The first experimental device demonstrating the principle was a row of closely spaced metal squares on an oxidized silicon surface electrically accessed by wire bonds. It was demonstrated by Gil Amelio, Michael Francis Tompsett and George Smith in April 1970. This was the first experimental application of the CCD in image sensor technology, and used a depleted MOS structure as the photodetector. The first patent (U.S. patent 4,085,456) on the application of CCDs to imaging was assigned to Tompsett, who filed the application in 1971. The first working CCD made with integrated circuit technology was a simple 8-bit shift register, reported by Tompsett, Amelio and Smith in August 1970. This device had input and output circuits and was used to demonstrate its use as a shift register and as a crude eight pixel linear imaging device. Development of the device progressed at a rapid rate. By 1971, Bell researchers led by Michael Tompsett were able to capture images with simple linear devices. Several companies, including Fairchild Semiconductor, RCA and Texas Instruments, picked up on the invention and began development programs. Fairchild's effort, led by ex-Bell researcher Gil Amelio, was the first with commercial devices, and by 1974 had a linear 500-element device and a 2D 100 × 100 pixel device. Peter L. P. Dillon, a scientist at Kodak Research Labs, invented the first color CCD image sensor by overlaying a color filter array on this Fairchild 100 x 100 pixel Interline CCD starting in 1974. Steven Sasson, an electrical engineer working for the Kodak Apparatus Division, invented a digital still camera using this same Fairchild 100 × 100 CCD in 1975. The interline transfer (ILT) CCD device was proposed by L. Walsh and R. Dyck at Fairchild in 1973 to reduce smear and eliminate a mechanical shutter. To further reduce smear from bright light sources, the frame-interline-transfer (FIT) CCD architecture was developed by K. Horii, T. Kuroda and T. Kunii at Matsushita (now Panasonic) in 1981. The first KH-11 KENNEN reconnaissance satellite equipped with charge-coupled device array (800 × 800 pixels) technology for imaging was launched in December 1976. Under the leadership of Kazuo Iwama, Sony started a large development effort on CCDs involving a significant investment. Eventually, Sony managed to mass-produce CCDs for their camcorders. Before this happened, Iwama died in August 1982. Subsequently, a CCD chip was placed on his tombstone to acknowledge his contribution. The first mass-produced consumer CCD video camera, the CCD-G5, was released by Sony in 1983, based on a prototype developed by Yoshiaki Hagiwara in 1981. Early CCD sensors suffered from shutter lag. This was largely resolved with the invention of the pinned photodiode (PPD). It was invented by Nobukazu Teranishi, Hiromitsu Shiraki and Yasuo Ishihara at NEC in 1980. They recognized that lag can be eliminated if the signal carriers could be transferred from the photodiode to the CCD. This led to their invention of the pinned photodiode, a photodetector structure with low lag, low noise, high quantum efficiency and low dark current. It was first publicly reported by Teranishi and Ishihara with A. Kohono, E. Oda and K. Arai in 1982, with the addition of an anti-blooming structure. The new photodetector structure invented at NEC was given the name "pinned photodiode" (PPD) by B.C. Burkey at Kodak in 1984. In 1987, the PPD began to be incorporated into most CCD devices, becoming a fixture in consumer electronic video cameras and then digital still cameras. Since then, the PPD has been used in nearly all CCD sensors and then CMOS sensors. In January 2006, Boyle and Smith were awarded the National Academy of Engineering Charles Stark Draper Prize, and in 2009 they were awarded the Nobel Prize for Physics for their invention of the CCD concept. Michael Tompsett was awarded the 2010 National Medal of Technology and Innovation, for pioneering work and electronic technologies including the design and development of the first CCD imagers. He was also awarded the 2012 IEEE Edison Medal for "pioneering contributions to imaging devices including CCD Imagers, cameras and thermal imagers". == Basics of operation == In a CCD for capturing images, there is a photoactive region (an epitaxial layer of silicon), and a transmission region made out of a shift register (the CCD, properly speaking). An image is projected through a lens onto the capacitor array (the photoactive region), causing each capacitor to accumulate an electric charge proportional to the light intensity at that location. A one-dimensional array, used in line-scan cameras, captures a single slice of the image, whereas a two-dimensional array, used in video and still cameras, captures a two-dimensional picture corresponding to the scene projected onto the focal plane of the sensor. Once the array has been exposed to the image, a control circuit causes each capacitor to transfer its contents to its neighbor (operating as a shift register). The last capacitor in the array dumps its charge into a charge amplifier, which converts the charge into a voltage. By repeating this process, the controlling circuit converts the entire contents of the array in the semiconductor to a sequence of voltages. In a digital device, these voltages are then sampled, digitized, and usually stored in memory; in an analog device (such as an analog video camera), they are processed into a continuous analog signal (e.g. by feeding the output of the charge amplifier into a low-pass filter), which is then processed and fed out to other circuits for transmission, recording, or other processing. == Detailed physics of operation == === Charge generation === Before the MOS capacitors are exposed to light, they are biased into the depletion region; in n-channel CCDs, the silicon under the bias gate is slightly p-doped or intrinsic. The gate is then biased at a positive potential, above the threshold for strong inversion, which will eventually result in the creation of an n channel below the gate as in a MOSFET. However, it takes time to reach this thermal equilibrium: up to hours in high-end scientific cameras cooled at low temperature. Initially after biasing, the holes are pushed far into the substrate, and no mobile electrons are at or near the surface; the CCD thus operates in a non-equilibrium state called deep depletion. Then, when electron–hole pairs are generated in the depletion region, they are separated by the electric field, the elec
Fake nude photography
Fake nude photography is the creation of nude photographs designed to appear as genuine nudes of an individual. The motivations for the creation of these modified photographs include curiosity, sexual gratification, the stigmatization or embarrassment of the subject, and commercial gain, such as through the sale of the photographs via pornographic websites. Fakes can be created using image editing software or through machine learning. Fake images created using the latter method are called deepfakes. == History == Magazines such as Celebrity Skin published non-fake paparazzi shots and illicitly obtained nude photos, showing there was a market for such images. Subsequently, some websites hosted fake nude or pornographic photos of celebrities, which are sometimes referred to as celebrity fakes. In the 1990s and 2000s, fake nude images of celebrities proliferated on Usenet and on websites, leading to campaigns to take legal action against the creators of the images and websites dedicated to determining the veracity of nude photos. "Deepfakes", which use artificial neural networks to superimpose one person's face into an image or video of someone else, were popularized in the late 2010s, leading to concerns about the technology's use in fake news and revenge porn. Fake nude photography is sometimes confused with Deepfake pornography, but the two are distinct. Fake nude photography typically starts with human-made non-sexual images, and merely makes it appear that the people in them are nude (but not having sex). Deepfake pornography typically starts with human-made sexual (pornographic) images or videos, and alters the actors' facial features to make the participants in the sexual act look like someone else. === DeepNude === In June 2019, a downloadable Windows and Linux application called DeepNude was released which used a Generative Adversarial Network to remove clothing from images of women. The images it produced were typically not pornographic, merely nude. Because there were more images of nude women than men available to its creator, the images it produced were all female, even when the original was male. The app had both a paid and unpaid version. A few days later, on June 27, the creators removed the application and refunded consumers, although various copies of the app, both free and for charge, continue to exist. On GitHub, the open-source version of this program called "open-deepnude" was deleted. The open-source version had the advantage of allowing it to be trained on a larger dataset of nude images to increase the resulting nude image's accuracy level. A successor free software application, Dreamtime, was later released, and some copies of it remain available, though some have been suppressed. === Deepfake Telegram Bot === In July 2019 a deepfake bot service was launched on messaging app Telegram that used AI technology to create nude images of women. The service was free and enabled users to submit photos and receive manipulated nude images within minutes. The service was connected to seven Telegram channels, including the main channel that hosts the bot, technical support, and image sharing channels. While the total number of users was unknown, the main channel had over 45,000 members. As of July 2020, it is estimated that approximately 24,000 manipulated images had been shared across the image sharing channels. === Nudify websites === By late 2024, most ways to produce nude images from photographs of clothed people were accessible at websites rather than in apps, and required payment. == Purposes == The reasons for the creation of nude photos may range from a need to discredit the target publicly, personal hatred for the target, or the promise of pecuniary gains for such work on the part of the creator of such photos. Fake nude photos often target prominent figures such as businesspeople or politicians. == Notable cases == In 2010, 97 people were arrested in Korea after spreading fake nude pictures of the group Girls' Generation on the internet. In 2011, a 53-year-old Incheon man was arrested after spreading more fake pictures of the same group. In 2012, South Korean police identified 157 Korean artists of whom fake nudes were circulating. In 2012, when Liu Yifei's fake nude photography released on the network, Liu Yifei Red Star Land Company declared a legal search to find out who created and released the photos. In the same year, Chinese actor Huang Xiaoming released nude photos that sparked public controversy, but they were ultimately proven to be real pictures. In 2014, supermodel Kate Upton threatened to sue a website for posting her fake nude photos. Previously, in 2011, this page was threatened by Taylor Swift. In November 2014, singer Rain was angry because of a fake nude photo that spread throughout the internet. Information reveals that: "Rain's nude photo was released from Kim Tae-hee's lost phone." Rain's label, Cube Entertainment, stated that the person in the nude photo is not Rain and the company has since stated that it will take strict legal action against those who post photos together with false comments. In July 2018, Seoul police launched an investigation after a fake nude photo of President Moon Jae-in was posted on the website of the Korean radical feminist group WOMAD. In early 2019, Alexandria Ocasio-Cortez, a Democratic politician, was berated by other political parties over a fake nude photo of her in the bathroom. The picture created a huge wave of media controversy in the United States. == Methods == Fake nude images can be created using image editing software or neural network applications. There are two basic methods: Combine and superimpose existing images onto source images, adding the face of the subject onto a nude model. Remove clothes from the source image to make it look like a nude photo. == Impact == Images of this type may have a negative psychological impact on the victims and may be used for extortion purposes.