A Continuous Function Chart (CFC) is a graphic editor that can be used in conjunction with the STEP 7 software package or with other tools, such as CODESYS. It is used to create the entire software structure of the CPU from ready-made blocks. When working with the editor, you place blocks on function charts, assign parameters to them, and interconnect them. Interconnecting means, for example, that values are transferred from one output to one or more inputs during communication between the blocks. Continuous function charts are basically used for controlling continuous processes, where all the logic is executed and outputs are calculated in each PLC scan. Whereas in SFC, execution will be sequential as done is batch processes.
Digital image processing
Digital image processing is the use of a digital computer to process digital images through an algorithm. As a subcategory or field of digital signal processing, digital image processing has many advantages over analog image processing. It allows a much wider range of algorithms to be applied to the input data and can avoid problems such as the build-up of noise and distortion during processing. Since images are defined over two dimensions (perhaps more), digital image processing may be modeled in the form of multidimensional systems. The generation and development of digital image processing are mainly affected by three factors: first, the development of computers; second, the development of mathematics (especially the creation and improvement of discrete mathematics theory); and third, the demand for a wide range of applications in environment, agriculture, military, industry and medical science has increased. == History == Many of the techniques of digital image processing, or digital picture processing as it often was called, were developed in the 1960s, at Bell Laboratories, the Jet Propulsion Laboratory, Massachusetts Institute of Technology, University of Maryland, and a few other research facilities, with application to satellite imagery, wire-photo standards conversion, medical imaging, videophone, character recognition, and photograph enhancement. The purpose of early image processing was to improve the quality of the image. In image processing, the input is a low-quality image, and the output is an image with improved quality. Common image processing includes image enhancement, restoration, encoding, and compression. The first successful application was the American Jet Propulsion Laboratory (JPL). They used image processing techniques such as geometric correction, gradation transformation, noise removal, etc. on the thousands of lunar photos sent back by the Space Detector Ranger 7 in 1964, taking into account the position of the Sun and the environment of the Moon. The impact of the successful mapping of the Moon's surface map by the computer has been a success. Later, more complex image processing was performed on the nearly 100,000 photos sent back by the spacecraft, so that the topographic map, color map and panoramic mosaic of the Moon were obtained, which achieved extraordinary results and laid a solid foundation for human landing on the Moon. The cost of processing was fairly high, however, with the computing equipment of that era. That changed in the 1970s, when digital image processing proliferated as cheaper computers and dedicated hardware became available. This led to images being processed in real-time, for some dedicated problems such as television standards conversion. As general-purpose computers became faster, they started to take over the role of dedicated hardware for all but the most specialized and computer-intensive operations. With the fast computers and signal processors available in the 2000s, digital image processing has become the most common form of image processing, and is generally used because it is not only the most versatile method, but also the cheapest. === Image sensors === The basis for modern image sensors is metal–oxide–semiconductor (MOS) technology, invented at Bell Labs between 1955 and 1960, This led to the development of digital semiconductor image sensors, including the charge-coupled device (CCD) and later the CMOS sensor. The charge-coupled device was invented by Willard S. Boyle and George E. Smith at Bell Labs in 1969. While researching MOS technology, they realized that an electric charge was the analogy of the magnetic bubble and that it could be stored on a tiny MOS capacitor. As it was fairly straightforward to fabricate a series of MOS capacitors in a row, they connected a suitable voltage to them so that the charge could be stepped along from one to the next. The CCD is a semiconductor circuit that was later used in the first digital video cameras for television broadcasting. The NMOS active-pixel sensor (APS) was invented by Olympus in Japan during the mid-1980s. This was enabled by advances in MOS semiconductor device fabrication, with MOSFET scaling reaching smaller micron and then sub-micron levels. The NMOS APS was fabricated by Tsutomu Nakamura's team at Olympus in 1985. The CMOS active-pixel sensor (CMOS sensor) was later developed by Eric Fossum's team at the NASA Jet Propulsion Laboratory in 1993. By 2007, sales of CMOS sensors had surpassed CCD sensors. MOS image sensors are widely used in optical mouse technology. The first optical mouse, invented by Richard F. Lyon at Xerox in 1980, used a 5 μm NMOS integrated circuit sensor chip. Since the first commercial optical mouse, the IntelliMouse introduced in 1999, most optical mouse devices use CMOS sensors. === Image compression === An important development in digital image compression technology was the discrete cosine transform (DCT), a lossy compression technique first proposed by Nasir Ahmed in 1972. DCT compression became the basis for JPEG, which was introduced by the Joint Photographic Experts Group in 1992. JPEG compresses images down to much smaller file sizes, and has become the most widely used image file format on the Internet. Its highly efficient DCT compression algorithm was largely responsible for the wide proliferation of digital images and digital photos, with several billion JPEG images produced every day as of 2015. Medical imaging techniques produce very large amounts of data, especially from CT, MRI and PET modalities. As a result, storage and communications of electronic image data are prohibitive without the use of compression. JPEG 2000 image compression is used by the DICOM standard for storage and transmission of medical images. The cost and feasibility of accessing large image data sets over low or various bandwidths are further addressed by use of another DICOM standard, called JPIP, to enable efficient streaming of the JPEG 2000 compressed image data. === Digital signal processor (DSP) === Electronic signal processing was revolutionized by the wide adoption of MOS technology in the 1970s. MOS integrated circuit technology was the basis for the first single-chip microprocessors and microcontrollers in the early 1970s, and then the first single-chip digital signal processor (DSP) chips in the late 1970s. DSP chips have since been widely used in digital image processing. The discrete cosine transform (DCT) image compression algorithm has been widely implemented in DSP chips, with many companies developing DSP chips based on DCT technology. DCTs are widely used for encoding, decoding, video coding, audio coding, multiplexing, control signals, signaling, analog-to-digital conversion, formatting luminance and color differences, and color formats such as YUV444 and YUV411. DCTs are also used for encoding operations such as motion estimation, motion compensation, inter-frame prediction, quantization, perceptual weighting, entropy encoding, variable encoding, and motion vectors, and decoding operations such as the inverse operation between different color formats (YIQ, YUV and RGB) for display purposes. DCTs are also commonly used for high-definition television (HDTV) encoder/decoder chips. == Tasks == Digital image processing allows the use of much more complex algorithms, and hence, can offer both more sophisticated performance at simple tasks, and the implementation of methods which would be impossible by analogue means. In particular, digital image processing is a concrete application of, and a practical technology based on: Classification Feature extraction Multi-scale signal analysis Pattern recognition Projection Some techniques that are used in digital image processing include: Anisotropic diffusion Hidden Markov models Image editing Image restoration Independent component analysis Linear filtering Neural networks Partial differential equations Pixelation Point feature matching Principal components analysis Self-organizing maps Wavelets == Digital image transformations == === Filtering === Digital filters are used to blur and sharpen digital images. Filtering can be performed by: convolution with specifically designed kernels (filter array) in the spatial domain masking specific frequency regions in the frequency (Fourier) domain The following examples show both methods: ==== Image padding in Fourier domain filtering ==== Images are typically padded before being transformed to the Fourier space, the highpass filtered images below illustrate the consequences of different padding techniques: Notice that the highpass filter shows extra edges when zero padded compared to the repeated edge padding. ==== Filtering code examples ==== MATLAB example for spatial domain highpass filtering. === Affine transformations === Affine transformations enable basic image transformations including scale, rotate, translate, mirror and shear as is shown in the following examples: To apply the affine
Irish logarithm
The Irish logarithm was a system of number manipulation invented by Percy Ludgate for machine multiplication. The system used a combination of mechanical cams as lookup tables and mechanical addition to sum pseudo-logarithmic indices to produce partial products, which were then added to produce results. The technique is similar to Zech logarithms (also known as Jacobi logarithms), but uses a system of indices original to Ludgate. == Concept == Ludgate's algorithm compresses the multiplication of two single decimal numbers into two table lookups (to convert the digits into indices), the addition of the two indices to create a new index which is input to a second lookup table that generates the output product. Because both lookup tables are one-dimensional, and the addition of linear movements is simple to implement mechanically, this allows a less complex mechanism than would be needed to implement a two-dimensional 10×10 multiplication lookup table. Ludgate stated that he deliberately chose the values in his tables to be as small as he could make them; given this, Ludgate's tables can be simply constructed from first principles, either via pen-and-paper methods, or a systematic search using only a few tens of lines of program code. They do not correspond to either Zech logarithms, Remak indexes or Korn indexes. == Pseudocode == The following is an implementation of Ludgate's Irish logarithm algorithm in the Python programming language: Table 1 is taken from Ludgate's original paper; given the first table, the contents of Table 2 can be trivially derived from Table 1 and the definition of the algorithm. Note since that the last third of the second table is entirely zeros, this could be exploited to further simplify a mechanical implementation of the algorithm.
Organizational information theory
Organizational Information Theory (OIT) is a communication theory, developed by Karl Weick, offering systemic insight into the processing and exchange of information within organizations and among its members. Unlike the past structure-centered theory, OIT focuses on the process of organizing in dynamic, information-rich environments. Given that, it contends that the main activity of organizations is the process of making sense of equivocal information. Organizational members are instrumental to reduce equivocality and achieve sensemaking through some strategies — enactment, selection, and retention of information. With a framework that is interdisciplinary in nature, organizational information theory's desire to eliminate both ambiguity and complexity from workplace messaging builds upon earlier findings from general systems theory and phenomenology. == Inspiration and influence of pre-existing theories == 1. General Systems Theory The General Systems Theory, on its most basic premise, describes the phenomenon of a cohesive group of interrelated parts. When one part of the system is changed or affected, it will affect the system as a whole. Weick uses this theoretical framework from 1950 to influence his organizational information theory. Likewise, organizations can be viewed as a system of related parts that work together towards a common goal or vision. Applying this to Weick's organizational information theory, organizations must work to reduce ambiguity and complexity in the workplace to maximize cohesiveness and efficiency. Weick uses the term, coupling, to describe how organizations, like a system, can be composed of interrelated and dependent parts. Coupling looks at the relationship between people and work. There are two types of coupling: 1. Loose coupling Loose coupling describes that while people within the organization or system are connected and often work together, they do not depend on one another to continue or fully complete individual work. The dependencies are weak and workflow is flexible. For example, "if the whole Science department completely shuts down because all of teachers are sick or for whatsoever reason, the school can still continue to operate because other departments are still present." 2. Tight coupling Tight coupling describes when connections within an organization are strong and dependent. If one part of the organization is not operating correctly, the organization as a whole cannot continue to their fullest potential. " For instance, the format and ink section completely shuts down hence the succeeding steps cannot be continued, so the whole process of the organization will be dropped. Thus, components of a system are directly dependent on one another." 2. Theory of evolution The theory of evolution, by Charles Darwin, is a framework for survival of the fittest. According to Darwin, organisms attempt to adapt and live in an unforgiving environment. Those that are unsuccessful in adaptation do not survive, while the strong organisms continue to thrive and reproduce. Weick invokes inspiration from Darwin, to incorporate a biological perspective to his theory. It is natural for organizations to have to adapt to incoming information that often interfere with the preexisting environment. Organizations that are able to plan and alter strategies in accordance with their constant need of organizing and sense making, will survive and be the most successful. However, there is a notable difference between animal evolution and survival of the fittest in organizations, "A given animal is what it is; variation comes through mutation. But the nature of an organization can change when its members alter their behavior." == Assumptions == 1. Human organizations exist in an information environment Unlike senders and receivers models, OIT stands on the situational perspective. Karl Weick views a human organization as an open social system. People in that system develop a mechanism to establish goals, obtain and process information, or perceive the environment. In this process, people and the environment come to conclusions on "what's going on here?". Colville believes that this attributional process is retrospective. Take an education institution as an example. A university can obtain information regarding students' needs in numerous ways. It might create feedback section in its website. It could organize alumni panels or academic affairs to attract prospective students and collect concrete questions they are interested in. It may also conduct the survey or host focus group to get the information. After that, the staff of the university have to decide how to deal with these information, based on which, it has to set and accomplish its goals for current and prospective students. 2. The information an organization receives differs in terms of equivocality Weick posits that numerous feasible interpretations of reality exist when organizations process information. Their varying levels of understandability lead to different outcomes of information inputs. In other academic works, scholars tend to say that messages are uncertain or ambiguous. While according to OIT, messages are described to be equivocal. believes that people proactively exclude a number of possibilities to perceive what is going on in the environment. Due to OIT's situational perspective, the meanings of messages consist of the messages, the interpretations of receivers, and the interactional context. However, ambiguity and uncertainty can mean that a standard answer - the only one true objective interpretation - exists. Also, Weick emphasizes that "the equivocality is the engine that motivates people to organize". Maitlis and Christianson states that the equivocality trigger sensemaking for three reasons: environment jolts and organizational crises, threats to identity, and planned change interventions. 3. Human organizations engage in information processing to reduce equivocality of information Based upon the first two assumption, OIT proposes that information processing within organizations is a social activity. Sharing is the key feature of organizational information processing. In that particular context, members jointly make sense the reality by reducing equivocality. It other words, the sensemaking is a joint responsibility which includes numerous interdependent people to accomplish. In this process, organizations and its members combine actions and attributions together in order to find the balance between the complexity of thoughts and the simplicity of actions. Weick also proposes that people create their own environment though enactment, which is the action of making sense. This is because people have different perceptual schemas and selective perception, so people create different information environments. In creating different information environments, people can arrive at the same or close to the same understanding or solution through different thought processes and overall understanding. == Key concepts == === The organization === In order to place Weick's vision regarding Organizational Information Theory into proper working context, exploring his view regarding what constitutes the organization and how its individuals embody that construct might yield significant insights. From a fundamental standpoint, he shared a belief that organizational validation is derived---not through bricks and mortar, or locale—but from a series of events which enable entities to "collect, manage and use the information they receive." In elaborating further on what constitutes an organization during early writings outlining OIT, Weick said, "The word organization is a noun and it is also a myth. if one looks for an organization, one will not find it. What will be found is that there are events linked together, that transpire within concrete walls and these sequences, their pathways, their timing, are the forms we erroneously make into substances when we talk about an organization". When viewed in this modular fashion, the organization meets Weick's theoretical vision by encompassing parameters that are less bound by concrete, wood, and structural restraints and more by an ability to serve as a repository where information can be consistently and effectively channeled. Taking these defining characteristics into account, proper channel execution relies on maximization of messaging clarity, context, delivery and evolution through any system. One example as to how these interactions might unfold on a more granular level within these confines can be gleaned through Weick's double interact loop, which he considers the "building blocks of every organization". Simply put, double interacts describe interpersonal exchanges that, inherently, occur across the organizational chain of command and in life, itself. Thus: "An act occurs when you say something (Can I have a Popsicle?). An interact occurs when you say something and I respond ("No, it will spoil your dinner
Archival bond
The archival bond is a concept in archival theory referring to the relationship that each archival record has with the other records produced as part of the same transaction or activity and located within the same grouping. These bonds are a core component of each individual record and are necessary for transforming a document into a record, as a document will only acquire meaning (and become a record) through its interrelationships with other records. == Description == The concept of the archival bond is primarily associated with the work of Luciana Duranti along with Heather MacNeil, as part of research into the integrity of electronic records. Duranti resumed and extended the concept of vincolo archivistico (archival bond), first expressed in 1937 by archivist Giorgio Cencetti of the Italian archival school. This bond emerges from the fact that electronic records are not physically arranged like traditional records. For traditional, analog records, their bond is implicit in their arrangement. But for electronic records, this bond must be made explicit due to the lack of a single sequential order of records in a digital environment. The archival bond was one of the core concepts of the subsequent International Research on Permanent Authentic Records in Electronic Systems (InterPARES) project and can be found in the InterPARES glossary. As Duranti notes, the archival bond is not to be confused with the broader term "context" as context exists independently of a record, while "the archival bond is an essential part of the record, which would not exist without it."
Automation in construction
Automation in construction is the combination of methods, processes, and systems that allow for greater machine autonomy in construction activities. Construction automation may have multiple goals, including but not limited to, reducing jobsite injuries, decreasing activity completion times, and assisting with quality control and quality assurance. Some systems may be fielded as a direct response to increasing skilled labor shortages in some countries. Opponents claim that increased automation may lead to less construction jobs and that software leaves heavy equipment vulnerable to hackers. Research insights on this subject are today published in several journals such as Automation in Construction by Elsevier. == Uses of automation in construction == Equipment control and management: Automation can be used to control and monitor construction equipment, such as cranes, excavators, and bulldozers. Material handling: Automated systems can be used to handle, transport, and place materials such as concrete, bricks, and stones. Surveying: Automated survey equipment and drones can be used to collect and analyze data on construction sites. Quality control: Automated systems can be used to monitor and control the quality of materials and construction processes. Safety management: Automated systems can be used to monitor and control safety conditions on construction sites. Scheduling and planning: Automated systems can be used to manage schedules, resources, and costs. Waste management: Automated systems can be used to manage and dispose of waste materials generated during construction. 3D printing: Automated 3D printing can be used to create prototypes, models, and even full-scale building components. == Autonomous heavy equipment == Advances in sensors, machine learning, and autonomous vehicle technology have led to the development of self-operating construction equipment and retrofit systems designed to automate excavators, bulldozers, tracked loaders, skid steer loaders, and haul trucks, allowing them to perform tasks with limited human supervision. Since 2017, tech companies have developed autonomous or semi-autonomous retrofit kits that can be installed on existing construction machinery. Examples include Bedrock Robotics, Built Robotics, and SafeAI, which develop sensor and software systems that enable excavators and other earthmoving machines to operate with varying degrees of autonomy. Major equipment manufacturers have also introduced autonomous capabilities: Caterpillar and John Deere have developed autonomous or semi-autonomous systems for construction and mining equipment, including haul trucks and earthmoving machines. == Transportation сonstruction == Kratos Defense & Security Solutions fielded the world’s first Autonomous Truck-Mounted Attenuator (ATMA) in 2017, in conjunction with Royal Truck & Equipment. == Benefits of automation in construction == The use of automation in construction has become increasingly prevalent in recent years due to its numerous benefits. Automation in construction refers to the use of machinery, software, and other technologies to perform tasks that were previously done manually by workers. One of the most significant benefits of automation in construction is increased productivity. Automation can help speed up construction processes, reduce project completion times, and improve overall efficiency. For example, using automated machinery for tasks such as concrete pouring, bricklaying, and welding can significantly increase the speed and accuracy of these tasks, allowing for more work to be completed in a shorter amount of time. Another benefit of automation in construction is improved safety. By automating tasks that are hazardous to workers, such as demolition or working at height, companies can reduce the risk of accidents and injuries on site. Automation can also help to reduce worker fatigue, which can be a significant factor in accidents and mistakes. Overall, the use of automation in construction can improve productivity, reduce costs, increase safety, and improve the quality of construction projects. As technology continues to advance, the use of automation is likely to become even more prevalent in the construction industry.
Time Warp Edit Distance
In the data analysis of time series, Time Warp Edit Distance (TWED) is a measure of similarity (or dissimilarity) between pairs of discrete time series, controlling the relative distortion of the time units of the two series using the physical notion of elasticity. In comparison to other distance measures, (e.g. DTW (dynamic time warping) or LCS (longest common subsequence problem)), TWED is a metric. Its computational time complexity is O ( n 2 ) {\displaystyle O(n^{2})} , but can be drastically reduced in some specific situations by using a corridor to reduce the search space. Its memory space complexity can be reduced to O ( n ) {\displaystyle O(n)} . It was first proposed in 2009 by P.-F. Marteau. == Definition == δ λ , ν ( A 1 p , B 1 q ) = M i n { δ λ , ν ( A 1 p − 1 , B 1 q ) + Γ ( a p ′ → Λ ) d e l e t e i n A δ λ , ν ( A 1 p − 1 , B 1 q − 1 ) + Γ ( a p ′ → b q ′ ) m a t c h o r s u b s t i t u t i o n δ λ , ν ( A 1 p , B 1 q − 1 ) + Γ ( Λ → b q ′ ) d e l e t e i n B {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{p},B_{1}^{q})=Min{\begin{cases}\delta _{\lambda ,\nu }(A_{1}^{p-1},B_{1}^{q})+\Gamma (a_{p}^{'}\to \Lambda )&{\rm {delete\ in\ A}}\\\delta _{\lambda ,\nu }(A_{1}^{p-1},B_{1}^{q-1})+\Gamma (a_{p}^{'}\to b_{q}^{'})&{\rm {match\ or\ substitution}}\\\delta _{\lambda ,\nu }(A_{1}^{p},B_{1}^{q-1})+\Gamma (\Lambda \to b_{q}^{'})&{\rm {delete\ in\ B}}\end{cases}}} whereas Γ ( α p ′ → Λ ) = d L P ( a p ′ , a p − 1 ′ ) + ν ⋅ ( t a p − t a p − 1 ) + λ {\displaystyle \Gamma (\alpha _{p}^{'}\to \Lambda )=d_{LP}(a_{p}^{'},a_{p-1}^{'})+\nu \cdot (t_{a_{p}}-t_{a_{p-1}})+\lambda } Γ ( α p ′ → b q ′ ) = d L P ( a p ′ , b q ′ ) + d L P ( a p − 1 ′ , b q − 1 ′ ) + ν ⋅ ( | t a p − t b q | + | t a p − 1 − t b q − 1 | ) {\displaystyle \Gamma (\alpha _{p}^{'}\to b_{q}^{'})=d_{LP}(a_{p}^{'},b_{q}^{'})+d_{LP}(a_{p-1}^{'},b_{q-1}^{'})+\nu \cdot (|t_{a_{p}}-t_{b_{q}}|+|t_{a_{p-1}}-t_{b_{q-1}}|)} Γ ( Λ → b q ′ ) = d L P ( b p ′ , b p − 1 ′ ) + ν ⋅ ( t b q − t b q − 1 ) + λ {\displaystyle \Gamma (\Lambda \to b_{q}^{'})=d_{LP}(b_{p}^{'},b_{p-1}^{'})+\nu \cdot (t_{b_{q}}-t_{b_{q-1}})+\lambda } Whereas the recursion δ λ , ν {\displaystyle \delta _{\lambda ,\nu }} is initialized as: δ λ , ν ( A 1 0 , B 1 0 ) = 0 , {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{0},B_{1}^{0})=0,} δ λ , ν ( A 1 0 , B 1 j ) = ∞ f o r j ≥ 1 {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{0},B_{1}^{j})=\infty \ {\rm {{for\ }j\geq 1}}} δ λ , ν ( A 1 i , B 1 0 ) = ∞ f o r i ≥ 1 {\displaystyle \delta _{\lambda ,\nu }(A_{1}^{i},B_{1}^{0})=\infty \ {\rm {{for\ }i\geq 1}}} with a 0 ′ = b 0 ′ = 0 {\displaystyle a'_{0}=b'_{0}=0} === Implementations === An implementation of the TWED algorithm in C with a Python wrapper is available at TWED is also implemented into the Time Series Subsequence Search Python package (TSSEARCH for short) available at [1]. An R implementation of TWED has been integrated into the TraMineR, a R package for mining, describing and visualizing sequences of states or events, and more generally discrete sequence data. Additionally, cuTWED is a CUDA- accelerated implementation of TWED which uses an improved algorithm due to G. Wright (2020). This method is linear in memory and massively parallelized. cuTWED is written in CUDA C/C++, comes with Python bindings, and also includes Python bindings for Marteau's reference C implementation. ==== Python ==== Backtracking, to find the most cost-efficient path: ==== MATLAB ==== Backtracking, to find the most cost-efficient path: